Items where Division is "Faculty of Mechanical Engineering" and Year is 2009

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | H | I | J | K | L | M | N | P | R | S | T | U | W | Y | Z
Number of items: 264.

A

A. R., Yusoff and Z., Ghazalli and Hazami, Che Hussain (2009) Determining Optimum EDM Parameters in Drilling a Small Hole by Taguchi Method. International Journal of Manufacturing Technology and Management, 17 (4). pp. 345-352. ISSN 1368-2148. (Published)

Abang Ma'aruf, Abang Bussri (2009) Numerical simulation of flow pattern and heat transfer mechanism from a heated cylinder in cross flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Gafar, Bashir (2009) Preliminary design and development of three wheel car for disable person. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Azwan, Abdol Zahar (2009) Effects of injection molding gate mechanism on parameters machining and defects of book tray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah Shariffudin, Mohamad (2009) Energy balance study for 4 stroke gasoline engine analyses. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abu Harfiz, Hassan (2009) Development of control system of automated guided vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adi Firdaus, Hat (2009) Dynamics characteristic of connecting rod for four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afiq Zainorul, Zainal (2009) Development of 1st and 2nd order tool life model when machining modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Amiruddin, Rosdi (2009) Warpage optimization of a name card holder using neural network model. Faculty of Mechanical Engineering, UNIVERSITI MALAYSIA PAHANG.

Ahmad Azinuddin, Zakaria (2009) Growth optimization of potassium solubilizing bacteria isolated from biofertilizer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bakhtiar, Mukhtar (2009) Effect of build orientation on mechanical properties of epoxy resin reinforced coconut fiber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bakri, Abdul Aziz (2009) Design and development of vacuum fruit frying machine for SMI and SME application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fadzil, Mohamad (2009) Effects of polarity parameter on the machining of tool steel workpiece using electric discharge machining (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Faiz, Fauzee (2009) Finite element analysis of composite cone under compression test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Faizal, Mohamad (2009) Effect of melting temperature on dimensional accuracy in sand casting product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fitri, Zainal Abidin (2009) Endurance limit of aluminum, brass and mild steel on different surface finish owing to cyclic loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Hafizi, Wahab (2009) Effects of punching force on cutting tool in forming process using FEA approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syafiq, Shiro (2009) Small sweep. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulhelmi, Muhamad (2009) Mold design for plastics injection molding process (two colors) and analysis of gates location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Khairi, Rosli (2009) Design and fabrication of shoes rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Yusri, Mohd Yusof (2009) Design and fabrication Al-Quran and book rack for UMP mosque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirruddin, Abdul Kadir (2009) Effect Of Gasohol Blends On A Four Cylinder, Port Fuel Injection Engine Performance. In: International Conference on Applications and Design in Mechanical Engineering (ICADME’09) , 11-13 Oct 2009 , Universiti Malaysia Perlis, Kangar, Malaysia. . (Unpublished)

Amirul Aliff, Jamaludin (2009) Development of MS ISO 9001 : 2008 management system for Automotive Excellence Center (AEC) at University Malaysia Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Amir, Abd Jamil (2009) Performance simulation of Modenas 110cc 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ammar, Ismail @ Mukhtar (2009) Finite element method modeling Fukui sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Basri, Musthafa (2009) Table expansion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anas Muzamil, Hamiddin (2009) Design and fabrication of multipurpose container. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anuarul Ikhwan, Mat Nazri (2009) Analysis and optimization of machining parameters based on different type of thickness in incremental forming process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arif Johari, Mat Ali @ Salim (2009) Internal surface pipe roughness classification : an acoustic emissions approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Asmahani, Abdul Kadir (2009) A numerical study on the effect of gasolie-hydrogen fuel blend on engine power and torque at medium and high engine speed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmerol, Alias (2009) Corrosion protection of steel structure for industrial application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Awang, Idris (2009) Effect of compressed natural gas on performance and emission of a 4-stroke spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Azizie, Asmawi (2009) Development of remotely operated vehicle (ROV) for underwater exploration. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azizie, Nasir (2009) Design and analysis of polymeric foam spraying machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

B

Badrul Hisyam, Ahmad (2009) Design improvement for power window mechanism-scissor type. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

C

Chai, Fook Siang (2009) Design of automatic gate mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, See Ling (2009) Design and fabricate an automatic fish feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chen, Choy Yuen (2009) Productivity improvement for pusat kesihatan pelajar (PKP) by using witness simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Crispin, Julip Jainul (2009) The effect of chatter on cutting tool in CNC milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

D

Dayangku Noorfazidah, Awang Sh'ri (2009) Effect of surface pretreatments on the deposition of polycrystalline diamond on silicon nitride substrates using hot filament chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia (Contributors, Thesis advisor: HAMZAH., ESAH).

Dulfharah, Nizam Memth Ali (2009) Effect of nozzle diameter on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

E

Elie Sem, Semilin (2009) Investigation and modelling prediction on surface roughness of titanium in dry turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

F

Faris, Suffian (2009) Experimental study of the heat affected zone (HAZ) and surface roughness on laser beam cutting (LBC) on acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

H

Harisuddin, Idris (2009) Influence of ethanol fuel in engine emision. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasan, Muda (2009) Effects of electrical discharge machining (EDM) jet flushing setting on the machining of tool steel workpiece. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasbullah, Ishak (2009) Experimental study on strength of spot welded. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi Asyraf, Razali (2009) Uncertainty analysis of two-shaft gas turbine parameter of artificial neural network (ANN) approximated function using sequential perturbation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hue, Wei Jy (2009) Development of MS ISO/IEC 17025 quality system (general requirements for the competence of testing and calibration laboratories) for FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Huzairi, Hashim (2009) Development of automated guided vehicle (mechanical system). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

I

Islahuddin Idha, Nawawi (2009) Finite element modelling of Erichsen Olsen sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izar Farhan, Nor Khiri (2009) The best compression ratio of modified piston for compressed natural gas(CNG)usage. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Izzan Hairi, Mohd Ibrahim (2009) Design and evaluation of the empennage for reconnaissance UAV. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

J

Jamail, Jamal (2009) Stress analysis on front car bumper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Jeffry, Ahmad (2009) Flow analysis on diseased human airway in second and third generation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jefry, Dedi Efendi (2009) Valve timing study of a single cylinder motorcycle engine /. Faculty of Mechanical Engineering , UNIVERSITI MALAYSIA PAHANG .

K

K., Kadirgama and M. M., Noor and M. M., Rahman and M. S. M., Sani (2009) Surface Roughness Analysis In End Milling With Response Ant Colony Optimization. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Fourth Order Torque Prediction Model in End Milling. Journal of Applied Sciences, 9 (13). pp. 2431-2437. ISSN 1812-5654. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

K., Kadirgama and M. M., Noor and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Development of Genetic Algorithms and Multilayer Perceptron Neural Network (Mpnn) Model To Study The Student Performance InThermodynamics. In: International Engineering Education Conference , 16-18 May 2009 , Madinah, Kingdom of Saudi Arabia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. S. M., Sani and R. A., Bakar and A., Ibrahim (2009) The Effect of the Foundation Subject to the Final Year Subject. In: International Journal Conference in Recent Trends in Mechanical Engineering (IJCRTME09) , 24-26 Apr 2009 , Trivandrum, Kerala, India.. . (Unpublished)

K., Kadirgama (2009) Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material. In: International Conference on Recent Advances in Materials, Minerals & Environment , 1 hingga 3 Jun 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2009) Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method. European Journal of Scientific Research, 25 (2). pp. 250-256. ISSN ISSN 1450-216X. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and W. S., Wan Harun (2009) Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling. European Journal of Scientific Research, 30 (3). pp. 451-463. ISSN 1450-216X. (Published)

Kamal Ariffin, Mohamad (2009) Uncertainty propagation analysis of artificial neural network (ANN) approximated function using numerical and analytical method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Khaider, Abu Bakar (2009) Effect of nozzle angle on jet impingement cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Asraf, Mazzlan (2009) A preliminary design of durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kogilan, Govindasamy (2009) Design and analysis of a rear wheel cover for a car using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Koh, Kelvin (2009) Analysis of heat gain against cooling capacity at occupied building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

L

Law, Chee Hong (2009) Performance optimization of domestic refrigerator using experimental method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Kim Sim (2009) Improvement of the productivity by increasing customer outputs at cafeteria on campus via simulation method in witness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Wen Yin (2009) Design and optimization of small scale factory manufacturing system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lew, Hon Chung (2009) Development of MS ISO/IEC 17025 quality system (general requirements for the competence of testing and calibration laboratories) for FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

M

M. F. F., Ab Rashid and Gan, Sin Yi and Noryanti, Muhammad (2009) Mathematical Modeling to Predict Surface Roughness in CNC Milling. Proceedings of World Academy of Science, Engineering and Technology, 3 (5). pp. 393-396. ISSN 2070-3740. (Published)

M. F. F., Ab Rashid and Shah, Izwandi (2009) Optimization of Turning Parameters to Minimize Production Cost using Genetic Algorithm. In: 2nd CUTSE International Conference , 24-25 November 2009 , Curtin University of Technology, Sarawak Campus, Miri, Sarawak. pp. 1-4.. (Unpublished)

M. F. F., Ab Rashid and M. R. M., Rejab and Mon, Daw T.T and N. S. M., Shalahim and Mohd Fazli, Ismail (2009) Virtual Laser-micromachining of MEMS Components. International Journal of Recent Trends in Engineering, 1 (5). pp. 105-109. ISSN 1797-9617. (Published)

M. M., Noor and K., Kadirgama and E. H., Jamaluddin and M. M., Rahman (2009) Method of Predicting, Estimating and Improving Mean Time between Failures in Reducing Reactive Work in Maintenance Organization. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1176-1186., 8. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and M. Y., Taib (2009) The Entry Qualifications and Gender Analysis of Student Performance by using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680. (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and T. T., Mon (2009) The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. Y., Taib (2009) The Effect of Entry Qualifications and Gender Towards Student Performance. In: International Engineering Education Conference , 16-19 May , Madinah, Kingdom of Saudi Arabia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Tool Life Analysis By Partial Swarm Optimisation. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009) , 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia.. . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Student Performance Analysis Using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Noor and T. T., Mon and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab (2009) Drilling on Fibre-Glass Composite using CO2 Laser. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab and S. A., Kesulai (2009) Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach. European Journal of Scientific Research, 30 (3). pp. 437-450. ISSN 1450-216X. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin (2009) Durability Assessment of Cylinder Block for Two Stroke Free Piston Linear Engine using Random Loading. American Journal of Applied Sciences, 6 (4). pp. 726-735. ISSN 1546-9239. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and A. K., Ariffin and S., Abdullah and M. A., Maleque (2009) Assessment of Surface Treatment on Fatigue Life of Cylinder Block for Linear Engine using Frequency Response Approach. American Journal of Applied Sciences, 6 (4). pp. 715-725. ISSN 1546-9239. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and K., Kadirgama (2009) Modeling and Engine Performance of Direct Injection Hydrogen Fueled Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Rahman and M. R. M., Rejab and K., Kadirgama and M. M., Noor and A. K., Ariffin (2009) Multiaxial Fatigue Behavior of Cylinder Head for a Free Piston Linier Engine. Journal of Applied Sciences , 9 (15). ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar (2009) Effect of Air Fuel Ratio on Engine Performance of Single Cylinder Port Injection Hydrogen Fueled Engine: A Numerical Study. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

M. M., Noor and K., Kadirgama (2009) Response Surface Method and Neural Network to Determine Surface Roughness for Laser Cutting on Acrylic Sheets. In: 12th Cirp Conference On Modelling Of Machining Operations , 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

M. M., Noor and K., Kadirgama and Aidy, Ali and M. M., Rahman and Z., Ghazalli (2009) Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239 (print); 1554-3641 (online). (Published)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and R. A., Bakar (2009) Artificial Intelligent Model to Predict Surface Roughness in Laser Machining. In: International Conference on Recent Advances in Materials, Minerals & Environment (RAMM’09), , 1-3 June 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

M. M., Noor and T. T., Mon and K., Kadirgama and R. A., Bakar (2009) Finite Element Analysis on Thermal Effect of the Vehicle Engine. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and M. R. M., Rejab (2009) Finite Element Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

M. R. M., Rejab and M. M., Noor and K., Kadirgama and M. M., Rahman and Z., Ahmad@Manap and M. S. M., Sani and R., Daud (2009) An Investigation of Profiles for Plate Cams with Vertical In-line Roller Followers. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. R. M., Rejab and M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2009) Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. R. M., Rejab and M. M., Noor and R., Daud and K., Kadirgama and M. S. M., Sani (2009) Effect of Adverse Environment on Buckling of Composite Laminates. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. S. M., Sani and Azlyna, Senawi (2009) Quantitative Assessment Of Bachelor Mechanical Engineering Programs By Senior Exit Surveys At Universiti Malaysia Pahang. In: International Engineering Education Conference , 16-19 May , Madinah, Kingdom of Saudi Arabia. . (Unpublished)

M. S. M., Sani and M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. S. M., Sani and M. M., Noor and M. H. A., Rasid and M. R. M., Rejab and K., Kadirgama and M. M., Rahman (2009) Experimental Study On Noise Source Identification Of Split Unit Air Conditioner System. In: International Conference on Advance Mechanical Engineering (ICAME09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. S. M., Sani and M. M., Noor and M. S. M., Zainury and K., Kadirgama and M. R. M., Rejab and M. M., Rahman (2009) Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09 , 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. S. M., Sani and M. M., Noor and T. T., Mon (2009) Stress Analysis And Modal Transient Response Of Car Chassis. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. Y., Taib and K., Kadirgama and M. M., Noor and M. S. M., Sani (2009) Performance Analysis of a Domestic Refrigerator in Malaysia using Experimental Method. In: Proceeding of International Conference on Recent and Emerging Advanced Technologies in Engineering (iCREATE 2009) , 23-24 November 2009 , Kuala Lumpur. . (Unpublished)

Mahasufee, Mahazis (2009) Design and analysis front hood fairing for cars. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahfuzah, Mohd Nasir (2009) Anti-theft car seat design (electronic/control). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Makeen, Mohd Amin (2009) Design automatic baby swing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mas Ayu, Hassan and Rosdi, Daud and Siti Haryani, Tomadi and Mohamed Reza Zalani, Mohamed Suffian (2009) Study of the Surface Integrity of AISI 4140 Steel in Wire Electrical Discharge Machining. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

Mas Ayu, Hassan and N. S., Mehat and S., Sharif and Rosdi, Daud and Siti Haryani, Tomadi and Mohamed Reza Zalani, Mohamed Suffian (2009) Study Of The Surface Integrity Of AISI 4140 Steel In Wire Electrical Discharge Machining. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS 2009) , 18-20 March 2009 , Hong Kong. pp. 1666-1671., II. ISBN 978-988-17012-7-5

Md Fakhrurazi, Abdul Halil (2009) Investigation of ductile iron 'sandwich' treatment process parameter. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Melcot, Jinikol (2009) Punching tool wear modeling using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mogan, Arasappan (2009) Development of controller software system for CAM manufacturing machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Azwan, Mohd Ghazali (2009) Development of multipurpose tree lamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Faizul, Khoruddin (2009) Finite element modeling swift sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Kamarul, Shamsuddin (2009) Aerodynamic study of vehicle drag based on bluff body. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Nadzif, Zahirudin (2009) Performance evaluation of Proton Waja car air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Noor Elya, Yahaya (2009) Design and fabricate of portable "Tabung Masjid". Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Rais, Ramli (2009) Investigation on surface roughness of mild steel using coated carbide cutting tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Rizam, Zenudin (2009) Simulation of droplet coalesce using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Safwan, Ahmad Lothfy (2009) Pressure drop analysis of 1.6L car air intake system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shahnaz, Samsul Bahari (2009) Response of human bone synthetic under impact load using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Tharmizi, Mohamad Ehsan (2009) Blood flow dynamics in microvessel bifurcations. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Waspi, Kassim Krismaran (2009) Influence of ethanol in spark ignition engine fuel consumption. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yazid, Idris (2009) Experimental study of kerf width and taper on laser beam cutting acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamed Kader Maidin, Y. Shahari (2009) Redesign of Takada radio using Boothroyd Dewhurst DFA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Afifi, Mohammad (2009) Types of damage in pin-loaded aluminum plate and other material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Amir, Hashim (2009) Finite element modelling of limiting dome high sheet metal formability test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Khyru, Aris (2009) Study of heat transfer coefficient for multi-jet air impinging cooling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohammad Rizal, Abdul Lani (2009) Modeling of milling process to predict surface roughness using artificial intelligent method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adzahari, Adnan (2009) Modeling the performance characteristics of hydrogen engine with fuel injection systems using GT-Power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Afize Syafri, Mohd Ajwi (2009) Improvement vehicle starting system through user password. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Ismail (2009) Experimental study of the laser beam cutting on acrylic sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizat, Mohd Azizan (2009) Design and prototype loading and unloading mechanism for automated guided vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Alhafiz, Maznan (2009) Design and fabricate an acoustic emission sensor adapter for engine performance monitoring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aliff, Mohd Radzi (2009) Design and analysis of two plate mold insert for dog bone specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asrol, Adnan (2009) Lecture hall chair : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aswad, Abd Wahab (2009) Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azmeer, Alias (2009) Design and fabrication of adjustable table for secondary student. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azri, Aris (2009) Whole energy balance for 1kw steam power plant. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Fadhli, Che Ismail (2009) Motorcycle jack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzil, Abdul Rahim (2009) Numerical study of combustion for a 4-stroke gasoline engine using turbulent flame speed closure model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Mohd Fadzli, Mansor (2009) Preliminary design of double rubber belt continuosly variable transmission (CVT). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faez, Baharom (2009) Virtual testing wind and analysis performance of UMP lab circuit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahies, Ismail (2009) A study of atmospheric corrosion indoor and outdoor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faiz, Zulkifli (2009) A preliminary design of lactating chair : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farhan, Mohd Pilus (2009) Improvement design for power window mechanism of cable type. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mohd Zaid (2009) Investigation on the shear joints failure with tensile loading for aluminum pins. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdauz, A. Samad (2009) Exhaust gas calorimeter for four stroke gasoline engine simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firzikri, Abd Sata (2009) A study of pipe leak source location using single channel acoustic emissions (AE) technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafeez, Ruslan (2009) Response of human bone synthetic under impact loading using experimental method. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafez, Saat (2009) Can opener. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Shaarani (2009) Design a battery charger controller for electric vehicle (mechanical). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanaffi, Othman (2009) Analysis of vibration in cam follower system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hasrul Naim, Md. Rahim (2009) Design and analysis a new simple tire nut opener. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Haziq, Nordin (2009) Coconut husk remover. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hilmi, Tajud Hassan (2009) Design an air conditioning system for UMP mosque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hisham, Sidi Ahmad (2009) Analysis and optimization machining parameter base on different type of material in incremental forming process (ALGOR simulation). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizzuan, Harun (2009) A study of acoustic emissions signal events in pedicle screw fixation procedure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Husaini, Abd Wahab (2009) Stress analysis on truck chassis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Jukimi, Joni (2009) Uncertainty analysis of artificial neural network (ANN) aproximated function for experimental data using sequential perturbation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Kamil, Ramli (2009) Foldable single bed. Faculty of Mechanical Engineering, University Malaysia Pahang .

Mohd Khairi, Mohd Noor (2009) Investigation of thin wall ductile iron parameter. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairi Azri, Shapie (2009) Design and fabrication of portable basketball hoop. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairil Azirul, Khairolazar (2009) Robust design of lower arm suspension using stochastic optimization method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Mizan, Nasir (2009) Investigate the effect of shear angle of high speed steel punching tool in punching process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Rizal, Abd. Halim (2009) Implementation of statistical process control in small and medium enterprise industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khalil Azingah, Salleh (2009) Simulation and analysis drag and lift coefficient between sedan and hatchback car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Naim, Zakaria (2009) Design for assembly and application using Hitachi assemblability evaluation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Naqiuddin, Mohd Salleh (2009) Development of impact test device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nasri, Md Salim (2009) Effect of dimensional parameters on warpage of injection-molded plastic part using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nasrul Mahmudi, Mahmud (2009) Optimization of molding parameter effect to warpage of car bumper based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazri, Ismail (2009) Effects of materials selection on injection moulding parameters using moldflow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazri, Noordin (2009) Sink marks defect on injection molding using different raw materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Noor Hafiz, Ahmad (2009) Design and fabrication multipurpose rack structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ruzaini, Zakaria (2009) Heat transfer phenomenon of heated cylinder at various locations in a square cavity. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Saiful Nizam, Mohamad (2009) Cathodic protection of underground steel pipelines by using sacrificial anodes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sani, Idris (2009) Design and fabrication of folding chair. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Shaifullah, Shahruddin (2009) Aerodynamics behaviour of Persona car using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shariman, Razali (2009) Effect of casting temperature on dimensional accuracy in gravity casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Suhaimi, Tambong (2009) Simulation of phase separation phenomenon using lattice boltzmann methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syimir Haziq, Noor Zainal (2009) Characterization of laser beam intensity used for machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Waqiuddin, Nordin (2009) Experimental study of heat transfer natural convection in horizontal internally finned tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yazid, Abu (2009) Prediction of cutting power in end-milling operation of modified AISI P20 steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yusuf, Mohd Jaafar (2009) Analysis of blood flow in abdominal aortic aneurysm using computational fluid dynamic. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zahiruddin, Azri (2009) Optimization of molding parameter effect to warpage of car dashboard based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zamri, Deraman (2009) Analysis of steady flow for various cerebral aneurysm size. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zul-Hilmi, Mohamad (2009) De-noising of an experimental acoustic emissions (AE) data using one dimensional (1-D) wavelet packet analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulfadhli, Abdul Wahab (2009) Flow analysis on diseased human airway in second and third generation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Akhbar Osman, Md. Hashim (2009) Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Amirudin, Kamalrul Badri (2009) Analysis performance of Waja car air-conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hazrul Hakimin, Abu Shaari (2009) Linear static stress analysis of an automobile fuel tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Izzat, Muhammad Atan (2009) Effect of different build orientation on mechanical properties of fiberglass reinforced composite. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Muhaimin, Roni (2009) Design and fabrication of three shelves book trucks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Nazumi, Basuki (2009) Prediction of cutting force in end-milling operation of modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq, Zali (2009) Lubrication oil system design for a new 4-strokes single-cylinder engine cylinder head. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Muhammad Aiman, Abdul Moin (2009) Simulation of Rayleigh Bernard convection using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aizat Zuhair, Mohd Azly (2009) Effect of double layer stent to flow phenomena in cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Asyraf, Mohd Niza (2009) Optimization of kitchen scale design by using Boothroyd-Dewhurst DFA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fakhri, Zainuddin (2009) A study on mold material and coating effect in sand casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Farid, Kamberi (2009) Design and analysis of cloth dryer cabinet by utilizing heat rejected from air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fauzie, Abu Bakar @ Nasir (2009) Design and fabrication clothes rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hanif, Abd Wahab (2009) Design and fabrication of foldable football goal. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hasri, Ibrahim (2009) Thermal response of silicon during virtual laser micromachining. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Hilm, Azahar (2009) Flow around a pair of side by side square cylinder in tandem arrangement using Lattice Boltzmann Method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat, Haslan (2009) Design and fabrication of reliability test fixtures (hook button stroke). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2009) Multifunction trolley (Children). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Muhaimin, Shaari (2009) Prediction of tire friction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Nasiruddin, Anidin (2009) Finite element analysis of upper crankshaft six stroke engine using CAE software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Nur Iznei, Hashim (2009) Modeling of fluid flow inside UMP's francis turbine using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Suhail, Md Ibrahim (2009) Design and fabricate two shelves file cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

Nafisah Almisriah, Maidin (2009) Computational properties of titanium using finite element prediction and experimental result. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazihah, Shaharudin (2009) Cylindricity of workpiece in conventional lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Ziet Hong (2009) Development of engine management system for modified diesel engine fuelled by compressed natural gas (CNG). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Muqaffi, Nik Jaffar (2009) Investigation of flow in elbow pipe using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Afeeza, Mohamad Sazali (2009) Experimental study of natural convection heat transfer in a vertical internally finned tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Effendy, Mat Rejab (2009) Preliminary design of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Harliana, A. Hamid (2009) Numerical investigation on the effect of different strut angle to the cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norul Hisyam, Md Sabri (2009) Investigate the influence of nothes on stresses for mild steel and aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ain Izzati, Zainudin (2009) Design and fabrication of foldable wet shopping cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Farah Bazilah, Wakhi Anuar (2009) Fatigue life estimation of cylinder block using strain-life method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Azwan, Adnan (2009) Material selection in mechanical design of car bumper. EngD thesis, University Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Husna, Mohamad Shariff (2009) Anti theft design of car seat (mechanical). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Jasmie, Che Ahamed (2009) Development of multifunction ladder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Syazrin, Roslan (2009) A preliminary design of the manual breast pump: an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

P

P. Vinothi, S Parawa Karan (2009) Comparison of the cutting force, power, tool life and torque in the end milling of modified AISI P20 tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Panirchelvan, Ramanathan (2009) Quality control in bearing manufacturing company using statistical proces control (SPC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Perabu, Moorty (2009) Design and fabrication test jig for cervical bone. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pylliscia Sumbok, Ak Adan (2009) Evaluation of two different types D2QA microscopic velocity models at low rayleigh number heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

R

R., Daud and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2009) Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2009 , 18–20 March 2009 , Hong Kong. pp. 1-6., II. ISBN 978-988-17012-7-5

Radin Mohd Ali Radin, Bahrom (2009) Mechanical property evaluation of bamboo fiber reinforced epoxy composite. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ridzuan Shah Razi, Varathau Rajoo (2009) Investigation the delay of crack using stop drilled holes on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rosman, Razali (2009) Two stroke small engine test rig design and its engine performance analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

S

S. N., Aqida and Maurel, M and Brabazon, D. and Naher, Sumsun and Rosso, M (2009) Thermal Stability Of Laser Treated Die Material For Semi-Solid Metal Forming. International Journal of Material Forming, 2. pp. 761-764. (Published)

Sajimar, Abdul Gajir (2009) The preliminary design of desktop desk : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sazwan, Sahar (2009) Design and fabrication of reliability test fixture for surface treatment test and peel off test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shaifulnizam, Sharif (2009) Investigation of flow around bluff body using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shamsul Aliff, Mohd (2009) Analysis of flow phenomena in stented cerebral aneurysms. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sibra Mallisi, Yussof (2009) Design and analysis battery packaging for electric vehicle (EV). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Aishah-Awanis, Mohd Yusoff (2009) Finite difference of thermal lattice Boltzmann scheme for the simulation of natural convection heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Siti Haryani, Tomadi and Mas Ayu, Hassan and Rosdi, Daud (2009) Analysis of the Influence of EDM Parameters on Surface Quality, Material Removal Rate and Electrode Wear of Tungsten Carbide. In: International MultiConference of Engineers and Computer Scientists 2009 (IMECS 2009) , 18 – 20 March 2009 , Hong Kong. .

Suriani, Abd Rahman (2009) The effect of stent void area on hemodynamics in cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahidah Nafisa, Abdul Malik (2009) Design and fabrication of reliability test device for telephone cord pulling strength and slip down test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syed Mohd Safwan, Sayed Md Saifuddin (2009) Development of control system for automated guided vehicle (AGV). Faculty of Mechanical Engineering, University Malaysia Pahang.

T

Tengku Ahmad Firdaus, Tengku Zainal (2009) Effect of solidification time to the wall thickness created on the slush casting product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tengku Fakhruzzaman, Tengku Yusoff (2009) Computational analysis of heat transfer rate using thermal response factor method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teoh, Yeong Chia (2009) Numerical simulation of single point diamond turning. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thien, Shiela Nga Ting (2009) 0910-F-021 effect of cutting speed and depth of cut on surface roughness of mild steel in turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Toh, Ban Sheng (2009) Reverse engineering of mobile phone casing and analysis of weld-line defect. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

U

Umar, Shafee (2009) Grid sensitivity study of in-cylinder engine meshing appropriate for flow and combustion analysis using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

W

Walter, Jenis (2009) Effect of welding nugget diameter on the tensile strength of the resistance spot welding joints of same sheets metal. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ahmad Amilin, Tengah @ Wan Ngah (2009) Design and analysis a control system for 3 axis mechanism machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Fadhli, Wan Ismail (2009) Tabung masjid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Firdaus, Wan Mohd Nor (2009) Modular study table. Faculty of Mechanical Engineering), Universiti Malaysia Pahang.

Y

Yap, Min Choo (2009) Investigation of ductile iron in mold treatment process parameter. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yazid, Yahya (2009) Optimization of micro EDM drilling process using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yeong, Choy Huey (2009) Effect of cutting speed and depth of cut on surface roughness of oil-quench mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Z

Zaidie, Rahim (2009) Modification of wheelchair function for handicap purpose usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zaitun, Mohd Desah (2009) Redesign a model of 32 inch LCD TV bracket. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zamri, Mohamed and Mohd Redza, Abdul Razak (2009) Prediction of Car Ground Clearance. In: Malaysian Technical Universities Conference on Engineering and Technology , 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

Zamzuri, Hamedon and M. S. M., Sani (2009) Characterization Of The Response Of Synthetic Bone Substitute To Compressive Load. In: AUN/SEED-Net Regional Conference 2009 , 16 -17 February 2009 , Equatorial Hotel Penang, Malaysia. . (Unpublished)

Zarina, Amat Jafar (2009) Design and analyzing of small blade wind turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Ahmad Shukron (2009) Pre-straining effect on yielding behaviour of low-carbon steels. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Yusof (2009) The analysis of wing performance for reconnaissance UAV. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

This list was generated on Fri Mar 29 02:52:24 2024 +08.