Items where Division is "Faculty of Mechanical Engineering" and Year is 2011

Article

A. K., Amiruddin and S. M., Sapuan and A. A., Jaafar (2011) Development of a hovercraft prototype with an aluminium hull base. International Journal of Physical Sciences, 6 (17). pp. 4185-4194. ISSN 1992-1950. (Published)

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ahmad Rasdan, Ismail and M.Z., Nuawi and N.F., Kamaruddin (2011) Comparative Study Of Whole-Body Vibration Exposure Between Train And Car Passengers: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 490-503. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Amir Radzi, Ab. Ghani and M. A., Hasan and M., Hamdi and Zahari, Taha (2011) Impact response of multi slotted square column. Journal of Mechanical Engineering, 8 (2). pp. 71-91. ISSN 1823-5514. (Published)

D., Ramasamy and Mahendran, Samykano and Z. A. A., Karim and Nagarajan, T. (2011) Design of valveless micropump using preliminary characteristics from fluid flow. Journal of Applied Sciences, 11 (11). pp. 2072-2075. ISSN 1812-5654. (Published)

Ibrahim, Thamir K. and M. M., Rahman and Abdalla, Ahmed N. (2011) Optimum gas turbine configuration for improving the performance of combined cycle power plant. Procedia Engineering, 15. pp. 4216-4223. ISSN 1877-7058. (Published)

Ismail, Z. and A. Z. C., Ong and Abdul Ghaffar, Abdul Rahman (2011) Crack damage detection of reinforced concrete beams using local stiffness indicator. Scientific Research and Essays, 6 (34). pp. 6798-6803. ISSN 1992-2248. (Published)

K., Kadirgama and M. M., Noor and K. V., Sharma (2011) Tool Life and Wear Mechanism when Machining Hastelloy C-22HS. Wear, 270 (3-4). pp. 258-268. ISSN 0043-1648. (Published)

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academy of Science, Engineering and Technology, 74. ISSN 2010-3778. (Published)

L. H., Shah and Tsuchiya, B. and Nagata, S. and Shikama, T. (2011) The Effect of Gamma-rays on the Electrical Properties of Zr55Ni5Al10Cu30 Bulk Metallic Glass. Journal of Nuclear Materials, 417 (1-3). pp. 822-825. ISSN 0022-3115. (Published)

L. Syam, Sundar and K. V., Sharma (2011) An Experimental Study On Heat Transfer And Friction Factor Of AL2O3 Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 99-112. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online). (Published)

M. H. M., Haniff and Ahmad Rasdan, Ismail and B. M., Deros and M. N. A., Rahman and K., Kadirgama (2011) The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 3. pp. 306-317. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman (2011) Particle Swarm Optimisation Prediction Model for Surface Roughness. International Journal of Physical Sciences, 6 (13). pp. 3082-3090. ISSN 1992-1950. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26. pp. 949-955. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680. (Published)

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X. (Published)

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680. (Published)

M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)

M. M., Rahman and Hamada, Khalaf I. and K., Kadirgama (2011) Heat transfer of intake port for hydrogen fueled port injection engine: A steady state approach. International Journal of Physical Sciences, 6 (16). pp. 3969-3976. ISSN 1992-1950. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680. (Published)

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2011) A Computational Comparison between Revetec Engine and Conventional Internal Combustion Engines on the Indicated Torque. World Academy of Science, Engineering and Technology, 5 (4). pp. 348-350. ISSN 2010-3778. (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ramli, Junid (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vinyl Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (3). pp. 74-79. (Published)

Ramli, Junid and Y., Nor Imrah and A. R., Jeeferie and Mohamad Mazwan, Mahat (2011) A Study on the Potential of Cost and Energy - A Survey at Playford Building, University of South Australia. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 25-36. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rao, B. Govinda and Rao, V. Dharma and Naidu, S. V. and Sharma, K. V. and Sreenivasulu, B. (2011) Heat transfer from a vertical fin array by laminar natural convection and radiation-A quasi-3D approach. Heat Transfer - Asian Research, 40 (6). pp. 524-549. ISSN 1099-2871. (Published)

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Reddy, K. Srinivasa and Murty, G.V. Ramana and Sharma, Korada Viswanatha (2011) Aerodynamic Studies in the Static Components of a Centrifugal Compressor Stage. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 75-86. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

S. N., Aqida and Naher, Sumsun and Brabazon, Dermot (2011) Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes. 14th International ESAFORM Conference on Material Forming: AIP Conference Proceedings, 1353. pp. 1081-1086. (Published)

Samykano, Mahendran and Fazli, Ismail and Chander, Sawalingam Thinesh (2011) Development of micro EDM with directly mounted APA 400MML actuator. Advanced Materials Research, 314-316. pp. 1811-1817. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Semin, Semin and Baheramsyah, Alam and Amiadji, Amiadji and Abdul Rahim, Ismail (2011) Effect of dry ice application in fish hold of fishing boat on the fish quality and fisherman income. American Journal of Applied Sciences, 8 (12). pp. 1263-1267. ISSN 1546-9239. (Published)

Sharma, Korada Viswanatha and B., Vijaya Lakshmi and T., Subrahmanyam and V., Dharma Rao (2011) Turbulent Film Condensation of Pure Vapors Flowing Normal to a Horizontal Condenser Tube - Constant Heat Flux at the Tube Wall. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 455-470. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Sharma, Korada Viswanatha and L. Syam, Sundar (2011) Laminar Convective Heat Transfer And Friction Factor Of AL2O3 Nanofluid In Circular Tube Fitted With Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan-Ju). pp. 265-278. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Saliza Azlina, Osman (2011) Effect of Multiple Reflow on Intermetallic Compound Formation using Various Surface Finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410 (print); 1741-8429 (online). (Published)

Srinivas, I. and Sharma, K. V. (2011) A comparison study on fuel properties of pretreated Pongamia and Jatropha methyl esters for C.I. engine usage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 34 (4). pp. 316-323. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Thet, Thet Mon (2011) Performance of Cryogenic Machining with Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials, 52 (54). pp. 2003-2008. ISSN 1662-7482. (Published)

Conference or Workshop Item

A. R., Yusoff and Nafrizuan, Mat Yahya (2011) A refined differential evolution algorithm for improving the performance of optimization process. In: International Conference on Informatics Engineering and Information Science (ICIEIS 2011) , 14-16 November 2011 , Kuala Lumpur. pp. 184-194., 252 (2). ISSN 1865-0929 ISBN 978-364225452-9

Abdul Adam, Abdullah and R., Mamat and Kidoguchi, Yoshiyuki and Yatsufusa, Tomoaki (2011) Analysis of Straight Vegetable Oil (SVO) Spray Characteristic and Droplets Distribution By Using Nano-Spark Shadowgraph Photography Technique. In: The 3rd International Renewable Energy Congress , 19-22 December 2011 , Japan. . (Unpublished)

Fakir, Md Moslemuddin and S., Basri and I. B. M., Sahat and Sharma, K. V. and Sabira, Khatun (2011) OFEM: An optimum finite element algorithm for heat transfer problem in twodimensional insulated-tip rectangular fin. In: 3rd International Conference on Computational Intelligence, Communication Systems and Networks , 26-28 July 2011 , Bali, Indonesia. pp. 173-177.. ISBN 978-1-4577-0975-3

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2011) An Integrated Representation Scheme for Assembly Sequence Planning and Assembly Line Balancing. In: Proceedings of the 9thInternational Conference on Manufacturing Research (ICMR 2011) , 6-8 September 2011 , Glasgow, UK. pp. 125-131..

M. M., Noor and T. F., Yusaf (2011) Implementation of Conditional Moment Closure using the Taylor Expansion and Finite Differences. In: International Conference of Mechanical Engineering Research (ICMER) 2011 , 5-7 Dec, 2011 , Malaysia. . (Unpublished)

M. M., Noor and T. F., Yusaf (2011) Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling. In: Australian Combustion Symposium , 29 Nov- 1 Dec 2011 , University of Newcastle. .

M. M., Noor and K., Kadirgama and A. K., Amiruddin and K. V., Sharma (2011) The Potential of Wind and Solar Energy in Malaysia East Coast: Preliminary Study at Universiti Malaysia Pahang (UMP). In: Energy and Sustainability 2011 , 11 - 13 April 2011 , Alicante, Spain. . (Unpublished)

M. S., Idris and C. S. N., Azwadi and N. M. M., Ammar (2011) Cubic interpolation profile Navier-Stokes numerical scheme for particle flow behaviour in triangular lid driven cavity. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 209-215., 1440 (209). ISSN 0094243X

M. S., Idris and Che Sidik, Nor Azwadi and N. I. N., Izual (2011) Vortex structure in a two dimensional triangular lid-driven cavity. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1078-1084., 1440. ISSN 0094-243X

Mohamad Zairi, Baharom and Priyandoko, Gigih and M.Z., Nuawi and S.M, Harris and L.M, Siow (2011) Eddy Current Braking Study for Brake Disc of Aluminium, Copper and Zink. In: Regional Engineering Postgraduate Conference (EPC) 2011 , 4-5 October 2011 , Puri Pujangga, UKM. .

Mohd Azrul Hisham, Mohd Adib (2011) Analysis of Echocardiography Images Using Grid Independent Technique for Patients with Mitral Valve Problems (MVP). In: International Conference on Information Science and Application (ICISA 2011), , 26-29 April 2011 , Jeju Island, Korea. . (Unpublished)

Mohd Fadhlan, Mohd Yusof and Che Ku Eddy Nizwan, Che Ku Husin and Nordin, Jamaludin and S., Abdullah (2011) Acoustic emission behavior during fatigue crack of API5LX70 gas pipeline steel. In: International Conference on Information Engineering for Mechanics and Materials (ICIMM 2011) , 13-14 August 2011 , Shanghai, China. pp. 148-152., 80-81. ISSN 16609336 ISBN 978-303785212-5

Mohd Yusof, Taib and S. F., Ismail and M., Ishak (2011) Sustainable Analysis of Lightweight Lift System Design for Disable People Using Finite Element. In: International Conference on Robotics Automation System (ICORAS 2011) , 23-24 May 2011 , ITC, Kemaman Terengganu. . (Unpublished)

Mon, Thet Thet and Khairul Fikri, Muhammad and Asnul Hadi, Ahmad and Zazuli, Mohid (2011) Experimental micromachining of silicon with Nd-YAG laser. In: International Conference on Experimental Mechanics (ICEM 2010) , 29 November - 1 December 2010 , Kuala Lumpur. pp. 244-248., 83. ISSN 16609336 ISBN 978-303785221-7

N. M. M., Ammar and C. S. N., Azwadi and M. S., Idris (2011) Particle movement in shear cavity flow for different Stokes number using lattice Boltzmann method. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1018-1024., 1440 (1018). ISSN 0094-243X

Noraini, Mohd Razali and Geraghty, John (2011) Genetic Algorithm Performance with Different Selection Strategies in Solving TSP. In: The 2011 International Conference of Computational Intelligence and Intelligent Systems , 6-8 July, 2011 , Imperial College, London. .

Syarifah, Syahirah and Kahar, Osman and Kamarul, Redzuan and Zamani, Ngali and Nasrul Hadi, Johari (2011) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 782-788., 1440 (782). ISSN 0094-243X

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2011) A Numerical Study of Forced Convection Heat Transfer for Staggered Tube Banks in Cross-Flow. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 216-227..

Reports

Korada, Viswanatha Sharma and Azmi, W. H. and R. A., Bakar and M. M., Noor and K., Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Thesis

Aguk Zuhdi, Muhammad Fathallah (2011) Design and simulation of a single cylinder high speed spark ignition linear engine with spring system. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Hemin M., Mohyaldeen (2011) Analysis of an automobile suspension arm using the robust design method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Mustafizur).

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Kamil, Mohammed (2011) Simulation models to optimise hydrogen fuelled engine performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nasrul Hadi, Johari (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Semin, Semin (2011) Development of new injector for compressed natural gas engine and the effect on performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nur Sakinah, Jamaludin (2011) Development of regenerative piezoelectric linear generator for alternative power generation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Sulaiman, Wan Mohamad (2011) A study of energy utilisation in a variable link length 3 DOF revolute articulated manipulator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Undergraduates Project Papers

Ahmad Aiman, Azmi (2011) Design and fabrication of multi touch screen keyboard table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zaim Solehin, Che Hasan (2011) Modelling and simulation of modified skyhook control for semi-active suspension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir, Abdullah (2011) Design and analysis of wheelchair according to human factor engineering. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Chang, Chun Kit (2011) Design of water bike for UMP Pekan lake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chee, Sai How (2011) Fabrication of perpetual motion water drinking toy bird. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gapar, Francis Giang (2011) Design and develop robotic arm for automated guided conveyor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hanif, Kasmani (2011) Flame propagation in spark ignition engine combustion process using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazizi Azri, Ahmad Sabri (2011) Experimental study of pack carburizing of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kok, Yin Hui (2011) Design and fabrication of stark whiteboard. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nafis, Jamaluddin (2011) Design and fabrication of adjustable work positioner. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Faiz Azmi, Ahmad Nordin (2011) The round wardrobe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rahmat, Ahmad Suhaimin (2011) Foldable and portable cupboard. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fikri, Abd Rahman (2011) Design, analysis and fabricate solar car chasis and body (race type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad 'Afif, Mohamed Azmi (2011) Design and fabrication of ventilated cat litter box. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad 'Ammar Shakir, Ishar (2011) Study characteristic of oil-water emulsion fuel for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Kamili, Zahidi (2011) Design and fabrication of hole cover by casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Khairi, Ghazali (2011) A study of pipe leak source location using single channel accoustic emission system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Ismail (2011) Experimental study of formability of sheet metal in deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saiful, Mustafa (2011) Turbulent flame speed in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saiful Azzam, Hamdan (2011) Investigation microstructure and mechanical properties of white cast iron using sand casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nagantheram, Sigithasan (2011) Design and fabrication of smart rack gadget. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Ahmad Fairuz, Nik Adlan (2011) Development hydrogen gas generator for duel fuel engine using capacitor water fuel cell method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Syafiqah, Mohd Nawawi (2011) Study on spray nozzle of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Jannah, Firdaus Ahmad Kamil (2011) Development of MS ISO 9001:2008 management system for automotive excellence center. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ponnusamy, Barath (2011) Magnet device to reduce diesel consumption in diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tan, Choon Mong (2011) Design and fabrication of multipurpose table kid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teng, Boon Wun (2011) Design and fabricate the new generation of working table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Vorathin, E. (2011) Design and fabrication of smart mousetrap. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Kamil, Wan Yacob (2011) Analysis of ventilation and heat removing system for Waja car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wong, Fei Yong (2011) Design and fabrication of MIG welding jigs. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.