Items where Division is "Faculty of Mechanical and Automotive Engineering Technology" and Year is 2021

A., Shah and Siti Nurul Fasehah, . and Mas Ayu, Hassan and Rosdi, Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588 (Published)

A., Shah and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Che Ghani, Che Kob (2021) Improvement of corrosion resistance of tin coated on titanium alloy for biomedical application. In: Journal of Physics: Conference Series; 2nd UPY International Conference on Applied Science and Education, UPINCASE 2020 , 3 - 4 November 2020 , Yogyakarta, Virtual. pp. 1-10., 1823 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Influence of polymer coated aggregate on the aggregate impact and crushing value. In: International Postgraduate Conference on Mechanical Engineering , 19th-20th January 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012039). ISSN 1757-899X (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and El-Bouri, Wahbi K. and Payne, Stephen J. and Wan Naimah, Wan Ab Naim and Nik Abdullah, Nik Mohamed (2021) Multiscale Modelling of 3-Dimensional Brain Tissue with Capillary Distribution. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi, Malaysia. pp. 1-4.. (Published)

Addepalli, Phanindra and Sawangsri, Worapong and Saiful Anwar, Che Ghani (2021) A qualitative study on cutting tool materials for bone surgeries. In: Materials Today: Proceedings; 2021 International Conference on Materials and System Engineering, ICMSE 2021 , 7-8 May 2021 , Karnataka. pp. 2457-2462., 47 (10). ISSN 2214-7853 (Published)

Ahmad Firdaus, Ilias and Mohd Azrul Hisham, Mohd Adib and Muhammad Nor Hakim, Hassan and Muhammad Mirza, Mustapah and Muhammad Alif Aiman, Jamaludin and Sheh Hong, Lim (2021) ReFlex gamification for cerebral palsy kids. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ahmad Rasdan, Ismail and Norfadzilah, Jusoh and Nor Kamilah, Makhtar and Raemy, Md Zein and Muhammad, Mat Noor and Khairul Azhar, Mat Daud (2021) Optimization of Temperature and Relative Humidity with Maximum Oxygen Uptake (VO2max) and Heart Rate (HR) by Using Response Surface Methodology (RSM). In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2021 , Pekan, Pahang, Malaysia. pp. 723-734.. ISBN 978-981-16-4115-2 (Published)

Ahmad Yunus, Nasution and Mohd Ruzaimi, Mat Rejab and Ma, Quanjin and Firmansyah, Mohamad Ardy (2021) Design optimization of passenger SUV's crash box and bumper beam by using finite element method. In: IOP Conference Series: Materials Science and Engineering. International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10th-11th November 2020 , Pekan, Malaysia. pp. 1-8., 1068 (012023). ISSN 1757-899X (Published)

Aina Najwa, Nadzri and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke treatment: A conceptual modeling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 2021 , 1-3 March 2021 , Virtual, Langkawi Island. pp. 303-308. (168430). ISBN 978-172814245-6 (Published)

Aina Najwa, Nadzri and Payne, Stephen J. and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke: a conceptual modelling study. In: 7th IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2020) , 1 - 3 Mar. 2021 , Langkawi (Online). pp. 1-6.. ISBN 978-1-7281-4246-3 (Published)

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Design and simulation of solar roof-top projects for an energy self-reliant university campus. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012013). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Solar PV Microgrids Implementation model: A case study of Local Self Governments in the Indian State of Kerala. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-13., 1068 (012024). ISSN 1757-899X (Published)

Ajith, Gopi and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. (2021) Comparison of normal and weather corrected performance ratio of photovoltaic solar plants in hot and cold climates. Energy for Sustainable Development, 65. pp. 53-62. ISSN 0973-0826. (Published)

Al-Bawri, Samir Salem and Islam, Mohammad Tariqul and Jit Singh, Mandeep and Jamlos, M. F. and Narbudowicz, Adam and Ammann, Max J. and Schreurs, Dominique M. M. P. (2021) RSS-based indoor localization system with single base station. Computers, Materials & Continua, 70 (3). pp. 5437-5452. ISSN 1546-2226. (Published)

Almanifi, Omair Rashed Abdul Wareth and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Muhammad Yusri, Ismail and Anwar, P. P. Abdul Majeed (2021) The classification of heartbeat PCG signals via transfer learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 49-59., 730. ISBN 978-981-33-4596-6 (Published)

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ang, Fuk Chen (2021) Evaluation of combustion characteristics, performance and exhaust emission for diesel fuel with various type nano particle blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)

Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Mohamad Heerwan, Peeie and Ahmad Fakhri, Ab. Nasir and Muhammad Izhar, Ishak (2021) Estimation of electric vehicle turning radius through machine learning for roundabout cornering. In: 19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021 , 23-25 November 2021 , Kota Kinabalu, Sabah. 329 -332.. ISSN 2643-2447 ISBN 978-1-6654-0193-7 (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X (Published)

Aslfattahi, Navid and Loni, Reyhaneh and Bellos, Evangelos and Najafi, Gholamhassan and Kadirgama, K. and Wan Harun, Wan Sharuzi and Saidur, R. (2021) Efficiency enhancement of a solar dish collector operating with a novel soybean oil-based-MXene nanofluid and different cavity receivers. Journal of Cleaner Production, 317 (128430). pp. 1-16. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Asri, M. N. A. M. and Abdullah, N.A.Z. and M. S. M., Sani (2021) The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8459 -8468. ISSN 2231-8380 (online). (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Oumer, Ahmed Nurye (2021) Thermal conductivity and dynamic viscosity of mono and hybrid organic- and synthetic-based nanofluids: A critical review. Nanotechnology Reviews, 10 (1). pp. 1624-1661. ISSN 2191-9097. (Published)

Atik, Faysal and Adhreena, M S N A and Vorathin, E. and Hafizi, Z. M. and Ngui, W K (2021) Leak diagnosis of pipeline based on empirical mode decomposition and support vector machine. IOP Conf. Series: Materials Science and Engineering, 1078 (1). pp. 1-9. ISSN 1757-899X (online); 1757-8981 (Print). (Published)

Azizuddin, Abd Aziz (2021) A tale of FTKMA focus groups. FTKMA Bulletin (2). p. 22. ISSN 2773-594X

Azrin, Abdul Aziz and Muhammad Yusri, Ismail (2021) Spark plug fault recognition using classification method in a spark ignition engine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and K., Sudhakar and C W, Mohd Nor and A, Zainal and Anwar, P. P. Abdul Majeed (2021) An overview of the spark plug engine profile in a spark ignition engine. IOP Conf. Series: Materials Science and Engineering, 1092 (012030). pp. 1-12. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and M.H., Mat Yasin and A., Zainal (2021) Effects of park energy on spark plug fault recognition in a spark ignition engine. Energy Engineering. ISSN 0199-8595. (Unpublished) (Unpublished)

Bhallamudi, Ramkiran and Kumarasamy, Sudhakar and Sundarabalan, Chinnayan Karuppaiyah (2021) Effect of dust and shadow on performance of solar photovoltaic modules : Experimental analysis. Energy Engineering: Journal of the Association of Energy Engineering, 118 (6). pp. 1827-1838. ISSN 0199-8595. (Published)

Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2021) Spectral subtraction-based filter for experimental modal analysis under harmonics excitation force. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8480-8489. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Che Zafirah, Rosly and Ummu Kulthum, Jamaludin and Khalijah, Khalid and Fatanah, Suhaimi and Normy Norfiza, Abdul Razak and Mohd Basri, Mat Nor and Azrina, Md Ralib (2021) Study on the enhancement of Malaysian ICU centre and introduction of STAR performance. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 63-73.. ISSN 2195-4356 ISBN 9789811641145 (Published)

Cuce, Erdem and Cuce, Pinar Mert and Sen, Harun and Sudhakar, K. and Berardi, Umberto and Serencam, Ugur (2021) Impacts of ground slope on main performance figures of solar chimney power plants: a comprehensive CFD research with experimental validation. International Journal of Photoenergy, 2021 (6612222). pp. 1-11. ISSN 1687-529X (Online). (Published)

Cuce, Erdem and Saxena, Abhishek and Cuce, Pinar Mert and Sen, Harun and Guo, Shaopeng and Sudhakar, K. (2021) Performance assessment of solar chimney power plants with the impacts of divergent and convergent chimney geometry. International Journal of Low-Carbon Technologies, 16 (3). 704 -714. ISSN 1748-1325. (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Epin, Vorathin (2021) Accuracy improvement of rubber-based diaphragm fibre bragg grating pressure sensors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Hafizi, Zohari,).

Erdiwansyah, . and M. S. M., Sani and Mahidin, . and M., Zaki and Asep, Kadarohman and Muhibbuddin, . and R. E, Sardjono and Asri, Gani (2021) Experimental investigation on noise and vibrations of biodiesel-butanol blends for diesel engine. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-8., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

F., Wasbari and R. A., Bakar and Gan, L. M. and M. A., Salim and N. A., Hamid and Herawan, S. G. (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14 (Special Issues). pp. 413-428. ISSN 1997-4434. (Published)

Fatchurrohman, Nanang and Jun, Hew Xiao and Muhida, Rifki and Adelino, Muhammad Ilham (2021) Performance simulation of bio-reinforced composite car door panel using finite element analysis. In: Proceedings - 2nd International Conference on Computer Science and Engineering: The Effects of the Digital World After Pandemic (EDWAP), IC2SE 2021. 2nd International Conference on Computer Science and Engineering, IC2SE 2021 , 16 - 18 November 2021 , Padang. pp. 1-5.. ISBN 978-166540045-9 (Published)

Faysal, Atik and Ngui, Wai Keng and Lim, M. H. (2021) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Nature Singapore, Singapore, pp. 605-615. ISBN 978-981-33-4596-6 (Print) 978-981-33-4596-6 (Online)

Fazal, M.A. and Sundus, F. and Masjuki, H.H. and Rubaiee, S. and Quazi, M.M. (2021) Tribological assessment of additive doped B30 biodiesel-diesel blend by using high frequency reciprocating rig test. Sustainable Energy Technologies and Assessments, 48. pp. 1439-1447. ISSN 2213-1388. (Published)

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and Rosli, Abu Bakar and Birouk, Madjid (2021) Performance and emissions of natural gas/diesel dual-fuel engine at low load conditions: Effect of natural gas split injection strategy. Fuel Processing Technology, 300 (121012). pp. 1-12. ISSN 0378-3820. (Published)

Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and S., Mohd Nadzir (2021) Numerical prediction of creep rupture life of ex-service and as-received grade 91 steel at 873 K. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8845 -8858. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Firdaus, Basrawi and Chandran, Puganesa (2021) PV cools: Close loop water cooling system for PV module. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

G., Sashwin Nair and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan (2021) Flow and heat transfer simulation analysis of 3D compact heat exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 71-87. ISSN 2289-7879. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)

Goyal, Ashish and Rahman, Huzef U. R. and Che Ghani, S. A. (2021) Experimental investigation & optimisation of wire electrical discharge machining process parameters for Ni49Ti51 shape memory alloy. Journal of King Saud University - Engineering Sciences, 33 (2). pp. 129-135. ISSN 1018-3639. (Published)

Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Hamzah, Ahmad and Mohamad Heerwan, Peeie and Mohd Syakirin, Ramli and Amir Akramin, Shafie and Mohd Hezri Fazalul, Rahiman (2021) Investigation of ROS based environment modelling and mobile robot position estimation with dead reckoning and uncertainties. In: IEACon 2021 - 2021 IEEE Industrial Electronics and Applications Conference. 2nd IEEE Industrial Electronics and Applications Conference, IEACon 2021 , 22 - 23 November 2021 , Virtual, Online. pp. 19-24.. ISBN 978-172819253-6 (Published)

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2021) Microstructure analysis and mechanical properties of dissimilar AA6061-AA7075 laser brazing with prefixed ER5356 filler. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012022). ISSN 1757-899X (Published)

Hanon, Muammel M. and Zsidai, László and Ma, Quanjin (2021) Accuracy investigation of 3D printed PLA with various process parameters and different colors. In: Materials Today: Proceedings; 3rd International Conference on Materials Engineering and Science, IConMEAS 2020 , 28 - 30 December 2020 , Kuala Lumpur, Malaysia. 3089 -3096., 42 (5). ISSN 2214-7853 (Published)

I, Samylingam and Aslfattahi, Navid and K., Kadirgama and Mahendran, Samykano and L., Samylingam and R., Saidur (2021) Improved Thermophysical Properties of Developed Ternary Nitrate-Based Phase Change Material Incorporated with MXene as Novel Nanocomposites. Energy Engineering, 118 (5). pp. 1253-1265. ISSN 0199-8595. (Published)

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Ilan Cheliyan, Samylingam (2021) Investigation of thermophysical properties of ternary nitrate based phase change material induced with mxene as novel class of nanocomposites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Sudhakar, Kumarasamy (2021) Prediction of lithium-ion battery temperature in different operating conditions equipped with passive battery thermal management system by artificial neural networks. Materials Today: Proceedings, 48 (6). pp. 1796-1804. ISSN 2214-7853. (Published)

Jamlos, M. A. and Jamlos, M. F. and Azri, A. and Mohamad Shaiful, Abdul Karim and Wan Azani, Mustafa and Akkaraekthalin, Prayoot (2021) Properties and performance verification on magnetite polydimethylsiloxane graphene array microwave sensor. Polymers, 13 (19). pp. 1-12. ISSN 2073-4360. (Published)

Juliawati, Alias and Fatin Ayuni, Ramlan and Nurul Amiratul, Johari and Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Nasrul Azuan, Alang (2021) “Aloe-heal coat” smart self-healing coating for anti-corrosion of automotive components. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Juliawati, Alias and N. A., Johari and A., Zanurin and Nasrul Azuan, Alang and M. Z. M., Zain (2021) Self-healing epoxy coating with microencapsulation of linseed oil for the corrosion protection of Magnesium (Mg). In: Journal of Physics: Conference Series. Journal of Physics: Conference Series; 1st International Conference on Material Processing and Technology, ICMProTech 2021 , 14 - 15 July 2021 , Perlis, Virtual. pp. 1-9., 2129 (0120081st). ISBN 1742-6588 (Published)

K., Farhana and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and M., Samykano and R., Saidur (2021) Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids. Sustainable Energy Technologies and Assessments, 45 (101049). pp. 1-16. ISSN 2213-1388. (Published)

K., Kadirgama (2021) A comprehensive review on the application of nanofluids in the machining process. The International Journal of Advanced Manufacturing Technology, 115. pp. 2669-2681. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

K., Kadirgama and L., Samylingam and Aslfattahi, Navid and M., Samykano and D., Ramasamy and R., Saidur (2021) Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-10., 1062 (012022). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

K. H., Tan and L., Samylingam and Aslfattahi, Navid and R., Saidur and K., Kadirgama (2021) Optical and conductivity studies of polyvinyl alcohol-MXene (PVA-MXene) nanocomposite thin films for electronic applications. Optics & Laser Technology, 36 (106772). pp. 1-12. ISSN 0030-3992. (Published)

Kadhim, Saleem Khalefa and Ali, Sinan Abdulghafar and Razak, N. F. D. and M. S. M., Sani (2021) Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-13., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Kananathan, J. and Mahendran, Samykano and K., Kadirgama and Ramasamy, D. and Rahman, M. M (2021) Statistical model for impact and energy absorption of 3D printed coconut Wood-PLA. Energy Engineering, 118 (5). pp. 1305-1315. ISSN 0199-8595. (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Jewaliddin, S. K. and Peddakapu, K. and Srinivasarao, P. (2021) Ultra-short-term PV power forecasting based on a support vector machine with improved dragonfly algorithm. In: 1st IEEE International Conference on Emerging Trends in Industry 4.0, ETI 4.0 2021 , 19 - 21 May 2021 , Raigarh, India. pp. 1-5. (175124). ISBN 978-166542237-6 (Published)

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

Kumar A., Praveen and Nagarjun, J. and Ma, Quanjin (2021) Potentiality of MWCNT fillers on the lateral crashworthiness behaviour of polymer composite cylindrical tubes under quasi-static loading. Journal of Industrial Textiles, 51 (Issue 4_suppl). 7014S-7033S. ISSN 1528-0837. (Published)

Kumaran, Kadirgama (2021) A comprehensive review on the application of nanofluids in the machining process. The International Journal of Advanced Manufacturing Technology, 115 (Issue 9-10). pp. 2669-2681. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X (Published)

Luqman Hakim, Ahmad Shah (2021) The Camouflage That Grapples Our Perception. FTKMA Bulletin (2). p. 19. ISSN 2773-594X

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Effect of thickness on the microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-7., 2339 (020032). ISSN 0094-243X (Published)

M., Nasuha and M. M., Rashidi and A., Hadi and Z., Shayfull (2021) Investigation on microstructure and morphology of copper alloy castings. In: AIP Conference Proceedings: Proceedings of Green Design And Manufacture 2020 , 23-24 July 2020 , Arau, Perlis, Malaysia. pp. 1-6., 2339 (020031). ISSN 0094-243X ISBN 978-0-7354-4091-3 (Published)

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020) , 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M. A. F., Romzi and J., Alias and M. I., M. Ramli (2021) Effect of zinc (Zn) on the microstructure and corrosion behaviour of magnesium (Mg). Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

M. A. F., Romzi and Juliawati, Alias and M. I. M., Ramli (2021) Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-12., 1068 (012004). ISSN 1757-899X (Published)

M. A. S. M., Tarminzi and Amir, Abdul Razak and M. A. A., Azmi and Y. H., Ming and M. R. M., Akramin and N. M., Mohktar and A. F., Sharol (2021) Recent advances in solar drying system: A review. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-13. ISSN 2289-697X. (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of different processing parameters on the semisolid microstructure of Al6061 produced by a direct thermal method. In: International Conference on Innovative Technology, Engineering and Sciences (ICTES 2020) , 22 December 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. . (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. I. M., Ramli and M. A. F., Romzi and Juliawati, Alias (2021) Effect of surface condition on the corrosion behaviour of AZ31 magnesium alloy. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

M. K., Akasyah and I. M., Yusri and R., Mamat and M. F., Jamlos and A. P. P., Abdul Majeed (2021) Experimental evaluation of tertiary blends of water in diesel with butyl alcohol using compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-14., 1092 (012072). ISSN 1757-899X (Published)

M. M., Noor (2021) The Importance of Moderate or Intense Low Oxygen Dilution MILD Combustion and The Impact on The Global Warming. FTKMA Bulletin (2). p. 16. ISSN 2773-594X

M. M., Quazi and M., Ishak and M. A., Fazal and A., Arslan and Rubaiee, Saeed and M. H., Aiman and Qaban, Abdullah and Farazila, Yusof and T., Sultan and M. M., Ali and S. M., Manladan (2021) A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications. Critical Reviews in Solid State and Materials Sciences, 46 (2). pp. 109-151. ISSN 1040-8436. (Published)

M. S. M., Ghazali and F. R. M., Romlay and A. A., Ehsan (2021) Manufacturing of polymer-based 1×2 Y-branch symmetric and asymmetric waveguide coupler through moulding technique. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8998 -9005. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and J. M., Zikri and Abdul Adam, Abdullah (2021) Sound intensity mapping on single cylinder direct injection diesel engine with the application of palm oil methyl ester biodiesel. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8833-8844. ISSN 2180-1606. (Published)

M. Y., Yuserny and M. H., Aiman and M. M., Quazi and M., Ishak and J., Shamini (2021) Viability of the novel process of indirect laser brazing. Lasers in Engineering, 51 (6). pp. 379-389. ISSN 1029-029X. (Published)

Ma, Quanjin and Ge, Jia and Mohd Ruzaimi, Mat Rejab and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2021) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1645-1651., 46 (Part 4). ISSN 2214-7853 (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Kumar, A. Praveen and Zhang, Bo and Sun, Bo and Mohamad Nazirul Mubin, Merzuki (2021) Free vibration analysis of two novel spherical-roof contoured cores (SRCC): A numerical study. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1775-1782., 48 (Part 6). ISSN 2214-7853 (Published)

Ma, Quanjin and Rejab, M. R. M. and Hanon, Muammel M. and Idris, Mat Sahat and Siregar, J. P. (2021) 3D-Printed Spherical-Roof Contoured-Core (SRCC) composite sandwich structures for aerospace applications. In: High-Performance Composite Structures. Composites Science and Technology . Springer, Singapore, pp. 75-91. ISBN 978-981-16-7377-1

Ma, Quanjin and Rejab, M. R. M. and Kumar, A. Praveen and Fu, Hao and Manoj Kumar, Nallapaneni and Tang, Jianbo (2021) Effect of infill pattern, density and material type of 3D printed cubic structure under quasi-static loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (19). 4254 -4272. ISSN 0954-4062. (Published)

Ma, Quanjin and Rejab, M. R. M. and Siregar, J. P. and Guan, Zhongwei (2021) A review of the recent trends on core structures and impact response of sandwich panels. Journal of Composite Materials, 55 (18). pp. 2513-2555. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Ma, Quanjin and Rejab, M. R. M. and Sun, Bo and Merzuk, M. N. M. (2021) A brief review of the cubic star on structural design, applications, and future perspective. Journal of Advanced Research in Applied Sciences and Engineering Technology, 24 (1). pp. 10-17. ISSN 2462-1943. (Published)

Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)

Mahendran, Kugendran and Muhammad Hilmi, Jalil (2021) Finite element analysis of different spinal cage designs for posterior lumbar interbody fusion. In: International Exchange and Innovation Conference on Engineering and Sciences. 7th International Exchange and Innovation Conference on Engineering and Sciences, IEICES 2021 , 21 - 22 October 2021 , Fukuoka. pp. 51-57.. ISSN 2434-1436 (Published)

Mahmood, R. A. and Ali, O. M. and Al-Janabi, A. and Al-Doori, G. and M. M., Noor (2021) Review of mechanical vapour compression refrigeration system part 2: performance challenge. International Journal of Applied Mechanics and Engineering, 26 (3). pp. 119-130. ISSN 1734-4492. (Published)

Manda, M. S. and M. R. M., Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) Review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure. Materials and Applications, 1 . Springer Link, Singapore, pp. 43-58. ISBN 978-981-16-6382-6 (Printed); 978-981-16-6383-3 (Online)

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2021) Investigation on linear and nonlinear dynamic equation for vehicle model in numerical simulation. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012010). ISSN 1757-899X (Published)

Mawarnie, Ismail (2021) Mechanical properties and fracture behavior of natural fiber-glass fiber reinforced epoxy matrix hybrid composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Rosli, Abu Bakar (2021) Optimization of CNG Direct Injector Parameters using model-based calibration framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 (1). Springer, Singapore, pp. 917-929. ISBN 978-981-33-4596-6 (Print) 978-981-33-4597-3 (Online)

Mohamad Nazirul Mubin, Merzuki and Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Zhang, Bo (2021) Experimental and numerical investigation of fibre-metal-laminates (FMLs) under free vibration analysis. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 854-860., 48 (4). ISSN 2214-7853 (Published)

Mohammad Shahnawaze, Ansari and Mohd Hafiz Dzarfan, Othman and Mohammad Omaish, Ansari and Sana, Ansari and Norazlianie, Sazali (2021) Large spin-dependent tunneling magnetoresistance in Fe3O4/PET heterostructures developed at room temperature: A promising candidate for flexible and wearable spintronics. Materials Science & Engineering: B, 265 (115033). pp. 1-10. ISSN 0921-5107. (Published)

Mohammed Hamood Hezam, Alshameri and Oumer, Ahmed Nurye and Azizuddin, Abd Aziz (2021) Novel compact fin and tube heat exchanger made of reinforced composite plate fins. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Azrul Hisham, Mohd Adib and Chik Ming, Mok and Nur Afikah, Khairi @ Rosli and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat (2021) CardioVASS device: For cardiology trainee. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Fadhlan, Mohd Yusof (2021) Monitoring and assessment of weld penetration condition during pulse mode laser welding using air-borne acoustic signal. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahadzir, Ishak@Muhammad).

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2021) Acoustic methods in real-time welding process monitoring: Application and future potential advancement. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8490 -8507. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadzil, Abdul Rahim (2021) Modelling and calibration of high-pressure direct injection compressed natural gas engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, B. Jaafar).

Mohd Hafiz, Ali (2021) Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Adam, Abdullah).

Mohd Hafizi, Zohari and Nur Ainaa Adhreena, Muhamad Shukri and Epin, Vorathin and Mohd Padzly, Radzi (2021) Smart bolt for digital bolted joint monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Haslizam, Abdullah (2021) Development of an open-architecture temperature data logger for hydro-distillation agarwood oil extractor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Kamal, Kamarulzaman (2021) Engine combustion, performance, and emission characteristics of hermetia illucens larvae oil in a compression ignition engine. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Noor Firdaus, Haron (2021) Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2021) A new piston referencing algorithm for qualitative assessment of free-piston engine generator performance. In: Lecture Notes in Mechanical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 935-948., 46. ISSN 2195-4356 (Published)

Mohd. Amirul Hilmi, Mohd Hanoin and Nor Amirah Safiah, Muhamad and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak and Muhamad Sukri, Hadi (2021) Effect of design parameters of serpentine-shaped flat plate solar collector under Malaysia climate conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (1). pp. 71-80. ISSN 2289-7879. (Published)

Muhamad Rozikin, Kamaluddin and M. F. F., Ab Rashid (2021) Modelling and Optimization of Asymmetric Vehicle Routing Problem Using Particle Swarm Optimization Algorithm. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-58.. ISBN 978-981-15-9505-9 (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) A review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure : Materials and Applications. Springer Nature, pp. 43-58. ISBN 978-981166383-3, 978-981166382-6

Muhamad Zulhilmi, Ismail (2021) Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad Amin, Harun and Zafri Azran, Abdul Majid and Zairul Azrul, Zakaria and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Ahmad Fadzil, Sharol and Amir, Abdul Razak (2021) Study on selection of a suitable material and the parameters for designing a portable flat plate base-thermal cell absorber (FPBTCA). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 71-92. ISSN 2289-7879. (Published)

Muhammad Aminuddin, Pi Remli and M. F., Ghazali and Azmi, W. H. and Hanafi, M. Yusop (2021) Transient-based leak detection and monitoring of water pipes using complementary ensemble empirical mode decomposition (CEEMD) method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 135-148. ISSN 2289-7879. (Published)

Muhammad Amir Syahiran, Muhammad Tarminzi and Amir, Abdul Razak and Muhammad Amirul Azwan, Azmi and Ahmad, Fazlizan and Zafri Azran, Abdul Majid and Kamaruzzaman, Sopian (2021) Comparative study on thermal performance of cross-matrix absorber solar collector with series and parallel configurations. Case Studies in Thermal Engineering, 25. pp. 1-17. ISSN 2214-157X. (Published)

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar P. P., Abdul Majeed (2021) The Effect of Image Input Transformation from Inertial Measurement Unit Data on the Classification of Skateboarding Tricks. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 424-432.. ISBN 978-981-16-4803-8 (Published)

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2021) Effect of Different Nickel Percentage in Solder Alloy towards Intermetallic Compound Formation and Growth. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-9., 1092 (012012). ISSN 1757-899X (Published)

Muhammad Azim Anwar, Noor Hisham (2021) Synthesis and characterisation of graphene and its corrosion resistance on magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Fathallah, Aguk Zuhdi and Bimatara, Ian and Rosli, Abu Bakar (2021) Prediction performance of two stroke semi free piston diesel engine with dual piston system. In: IOP Conference Series: Earth and Environmental Science, 6th International Conference on Marine Technology (SENTA 2021) , 27 November 2021 , Surabaya, Indonesia. pp. 1-10., 972 (012083). ISSN 1755-1315 (Published)

Muhammad Hanafi, Yusop and Ghazali, M. F. and Mohd Fadhlan, Mohd Yusof and Muhammad Aminuddin, Pi Remli (2021) Pipeline condition assessment by instantaneous frequency response over hydroinformatics based technique—An experimental and field analysis. Fluids, 6 (11). pp. 1-29. ISSN 2311-5521. (Published)

Muhammad Hilmi, Jalil and Omar, Nadzeri and Muhd Hazli, Mazlan and Mahendran, Kugendran and Mohd Firdaus, Mak Nanyan (2021) Polymeric spinal cage developed via ct-fea. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and Quazi, M. M. and Aiman, Mohd Halil and Yamasaki, Kazuhiko (2021) Pulsed ND YAG laser parameter effect on welding uncoated Advanced High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

Muhammad Naqiuddin, Mat Salleh and Mahadzir, Ishak and Yamasaki, Kazuhiko and Moinuddin, Mohammed Quazi and Aiman, Mohd Halil (2021) Pulsed Nd: YAG laser parameters effect on welding uncoated Advance High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

Muhammad Nor Azril, Zulkafli and Norazlianie, Sazali and Saiful Anwar, Che Ghani and Maurice, Kettner (2021) Investigation on an innovative hydrocarbon sensor for real drive emissions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (2). pp. 39-49. ISSN 2289-7879. (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Wan Azmi, Wan Hamzah (2021) Heat transfer and pressure drop of water based hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC. Journal of Advanced Research in Numerical Heat Transfer, 4 (1). pp. 1-13. ISSN 2289-7879. (Published)

Munir Afnan, Mukhtar and R. A., Bakar and Mohd Farid, Zainudin (2021) Thermodynamic analysis of a gamma-configuration stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 114-126. ISSN 2289-7879. (Published)

Munirah, Nawi and Norazlianie, Sazali and S. A., Che Ghani and Kettner, Maurice (2021) Newly Developed Thermal Load Profile for Enhancement in Hot Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 83-94. ISSN 2289-7879. (Published)

Murugan, P. and Dhanushkodi, S. and Sudhakar, K. and Wilson, Vincent H. (2021) Industrial and small-scale biomass dryers: an overview. Energy Engineering, 118 (3). 435 -446. ISSN 0199-8595. (Published)

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

N. A., Abdul Muta’ali and Norazlianie, Sazali and S. A., Che Ghani and Walter, J. (2021) Water monitoring system design for data collection at specific intervals via cloud application. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-9., 1078 (012002). ISSN 1757-899X (Published)

N. A., Abdul Muta’ali and Norazlianie, Sazali and S. A., Che Ghani and Walter, J. (2021) Water quality monitoring via cloud application: Brief review. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-7., 1078 (012001). ISSN 1757-899X (Published)

N. A., Alang and J., Alias and Z., Sajuri and S., Nur Atiqah (2021) Finite Element Modelling of Creep Rupture on Grade 91 Steel using Monkman-Grant Ductility based Damage Model. International Journal of Integrated Engineering, 13 (7). pp. 108-118. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

N. A., Awang and W. N. W., Salleh and S. Z. N., Ahmad and N. H., Ismail and N., Rosman and Norazlianie, Sazali and H., Ibrahim and A. F., Ismail (2021) Acrylonitrile-grafted recycled papers for Ni(II) ions removal. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Khairil Anwar, Abu Kassim and Ahmad Azad, Ab. Rashid and Intan Suhana, Mohd Razelan and Nur Aqilah, Othman (2021) The influence of socio-demographics background on the driving behavior A short review. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 194-205. ISSN 2550-2239. (Published)

N.A.Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2021) Study of modal properties and crashworthiness performance of crash box numerical model with different joining modelling strategies. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-12., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Nadhrah, Murad (2021) Microstructural evaluation of sn3.0ag0.5cu solder alloy fabricated via powder metallurgy method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Naidu Sanderasagran, Ashwindran and Abd Aziz, Azizuddin and Nurye Oumer, Ahmed (2021) Study of √2 conjecture in the construction of drag induced wind turbine blade morphology. Evergreen, 8 (3). pp. 574-585. ISSN 2189-0420. (Published)

Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Juliawati, Alias and Nasrul Azuan, Alang (2021) Design and development of motorbike roof shield for delivery service. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nasrul Azuan, Alang (2021) Creep Failure - The Natures Insidious Plight. FTKMA Bulletin (2). p. 20. ISSN 2773-594X

Naveed, M. and Arslan, A. and Javed, H. M. A. and Manzoor, T. and Quazi, M. M. and Imran, T. and Zulfattah, Z. M. and Khurram, M. and Fattah, I. M. R. (2021) State-of-the-art and future perspectives of environmentally friendly machining using biodegradable cutting fluids. Energies, 14 (16). pp. 1-35. ISSN 1996-1073. (Published)

Nida, Khan and Sudhakar, K. and R., Mamat (2021) Role of biofuels in energy transition, green economy and carbon neutrality. Sustainability (Switzerland), 13 (22). pp. 1-30. ISSN 2071-1050. (Published)

Nor Atiqah, Zolpakar and Normah, Mohd Ghazali (2021) Development of stack component for thermoacoustic refrigerator using 3d printer. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nor Azmi, Johari and Juliawati, Alias and Aliaa, Zanurin and Nurul Shuhada, Mohamed and Nasrul Azuan, Alang and Mohd Zamzuri, Mohd Ghani (2021) Anti-corrosive coatings of magnesium : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1842-1848., 48 (6). ISSN 2214-7853 (Published)

Nor Syukriah, Khalid and M. F., Hassan and Mohd Hafizi, Zohari and Muhammad Rais, Rahim (2021) A strain-wavelength modelling of low-frequency cantilever fibre Bragg grating accelerometer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. pp. 1-13. ISSN 0954-4062. (Published)

Norazlianie, Sazali and W. N. W., Salleh and A. F., Ismail and Iwamotoe, Yuji (2021) Incorporation of thermally labile additives in polyimide carbon membrane for hydrogen separation. International Journal of Hydrogen Energy. pp. 1-9. ISSN 0360-3199. (In Press / Online First) (In Press / Online First)

Nur Afikah, Khairi @ Rosli and Mohd Azrul Hisham, Mohd Adib and Ming, Mok Chik and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) Experimental study between TPU Flex and Silicon Materials Mechanical Properties as an alternatives in development of the CardioVASS Heart Model. In: 6 th Kuala Lumpur International Conference on Biomedical Engineering (BioMed2021) , 28 -29 July 2021 , Virtual. pp. 1-14.. (Published)

Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Natasha, Mohd Sukri and Nur Hazreen, Mohd Hasni (2021) Comparative study between TPU flexible and soft epoxy resin materials on development of heart model for CardioVASS device. In: Intelligent Manufacturing and Mechatronics Proceedings of SympoSIMM 2020. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 913-931. ISBN 978-981-16-0865-0 (Print); 978-981-16-0866-7 (Online)

Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) The CardioVASS Heart Model: Comparison of Biomaterials between TPU Flex and Soft Epoxy Resin for Biomedical Engineering Application. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 224-229. (20611023). ISBN 978-1-7281-4245-6 (Published)

Nur Amalina, Has and Mohd Najeb, Jamaludin and Sujana, Mohd Rejab and Zulkifli, Ahmad@Manap and Nurul Farha, Zainuddin and Abdul Haris, Abdul Salam and Ai Reen, Chu and Muhammad Amir, As'ari (2021) P300 somatosensory validation of vibrotactile haptic feedback for upper limb prosthesis. In: 1st National Biomedical Engineering Conference, NBEC 2021. 1st National Biomedical Engineering Conference, NBEC 2021 , 9 - 10 November 2021 , Virtual, Online. pp. 19-24.. ISBN 978-166543607-6 (Published)

Nur Ariza Hayani, Mohd Nizam and Muhammad Hazli, Mazlan and Nur Saliha, Md Salleh and Muhammad Anas, Razali and Abdul Halim, Abdullah and Muhammad Hilmi, Jalil and Takano, Hiromitsu and Nur Dalilah Diyana, Nordin (2021) Design and analysis of interbody fusion cage materials based on finite element analysis. In: 1st National Biomedical Engineering Conference, NBEC 2021. 1st National Biomedical Engineering Conference, NBEC 2021 , 9 - 10 November 2021 , Virtual, Online. pp. 7-12.. ISBN 978-166543607-6 (Published)

Nurain, Rozy and Norazlianie, Sazali and Saiful Anwar, Che Ghani and Maurice, Kettner (2021) Innovative hydrocarbon sensor for real drive emission testing: optimization of the gas inlet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 1-10. ISSN 2289-7879. (Published)

Nurazima, Ismail and Z. M., Hafizi and C. K. E., Nizwan and S., Ali (2021) Interactions of Lamb waves with defects in a thin metallic plate using the finite element method. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 183-193.. ISBN 978-981-15-7309-5 (Published)

Nurizzatul Atikha, Rahmat and Mujahid Husaimi, Che Hassan and Mohammad Rozaki, Ramli (2021) Enhanced smoke wire technique in small scaled quasi-atmospheric boundary layer wind tunnel. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and M., Ishak and Tsukada, Keiji (2021) Anisotropy magnetoresistance differential probe for characterization of sub-millimeter surface defects on galvanized steel plate. Measurement and Control, 2021. pp. 1-13. ISSN 0020-2940. (Published)

Omar, Nadzeri and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Mohd Amzar, Azizan (2021) Modeling of soft tissue deformation using mass spring method with nonlinear volume force. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 75-90.. ISSN 2195-4356 ISBN 9789811641145 (Published)

Omar, Nadzeri and Zhong, Yongmin (2021) Flexible mass spring method for modelling soft tissue deformation. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 24-41. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Qayyum, Halim and Nik Abdullah, Nik Mohamed and M. R. M., Rejab and Wan Naimah, Wan Abdul Naim and Ma, Quanjin (2021) Metallic glass properties, processing method and development perspective: a review. The International Journal of Advanced Manufacturing Technology, 112. pp. 1231-1258. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Qurratu 'Aini Aishah, Ahmad Fazil (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qurratu 'Aini Aishah, Ahmad Fazil and Ummu Kulthum, Jamaludin (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 43-61.. ISSN 2195-4356 ISBN 978-981164114-5 (Published)

R., Linggamm and M. Nasir, Bashir and Quazi, M. M. and M., Ishak (2021) The influence of nanosecond fibre laser on the removal of paint on metallic surface. International Journal of Technology and Engineering Studies, 7 (2). pp. 1-7. ISSN 2414-3413. (Published)

Radzuan, N. Q. and Mohd Hasnun Ariff, Hassan and Abu Kassim, K. A. and Ab. Rashid, A. A. and Intan Suhana, Mohd Razelan and Nur Aqilah, Othman (2021) The analysis of road traffic fatality pattern for Selangor, Malaysia case study. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 79-88. ISSN 2637-0883. (Published)

Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4

Rajan, Kumaresan and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and Ngui, Wai Keng and Adarsh Kumar, Pandey (2021) 3D printing technology for thermal application: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 84-97. ISSN 2289-7879. (Published)

Ramasamy, Linggamm and Quazi, Moinuddin Mohammed and Aiman, M.H. and Mahadzir, Ishak (2021) Laser celaning process for the removal of surface contaminants, corrosion and paint. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ramkiran, B. and Sundarabalan CK, C. K. and Sudhakar, K. (2021) Sustainable passive cooling strategy for PV module: A comparative analysis. Case Studies in Thermal Engineering, 27 (101317). pp. 1-10. ISSN 2214-157X. (Published)

Rashidi, M. M. (2021) Processing of Customized Automotive Components Nickel Aluminium Bronze Material using Metal Casting Techniques. FTKMA Bulletin . p. 14. ISSN 2773-594X

Rosdi, Daud and Kae, W. Y. and Mas Ayu, Hassan and Shah, A. (2021) Effect of thread profile variation on pullout and bending strength of a pedicle screw. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (1). ISSN 1757-899X (Published)

Rosdi, Daud and Kennedy, S. J. and Mas Ayu, Hassan and A., Shah (2021) Effect of thread profile on bending strength of pedicle screw. In: The International Postgraduate Conference on Mechanical Engineering (IPCME2021) , 10-14 Oct. 2020 , Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1-7.. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

Rosdi, Daud and Kennedy, S. J. and Mas Ayu, Hassan and A., Shah (2021) Effect of thread profile on bending strength of pedicle screw. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME2021) , 19-20 January 2021 , Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1-8., 1078 (012026). ISSN 1757-899X (Published)

Roshahliza, M. Ramli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Aqilah, Herman and Mohamad Syazwan, Mohd Roni and Amirul Hafiz, Zexafiza (2021) Unmanned ground vehicle for covid-19 waste management. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Rosmazi, Rosli and Zamri, Mohamed (2021) Optimization of modified Bouc–Wen model for magnetorheological damper using modified cuckoo search algorithm. Journal of Vibration and Control, 27 (17-18). pp. 1-12. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Rosmazi, Rosli and Zamri, Mohamed and Priyandoko, G. (2021) Semi active seat suspension system using modified intelligent active force control. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8498 -8504. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) 7E analysis of a conceptual utility-scale land-based solar photovoltaic power plant. Energy, 219 (119610). pp. 1-12. ISSN 0360-5442. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Energy-exergy-economic-environmental-energo-exergo-enviroecono (7E) analysis of solar photovoltaic power plant: a case study of 7 airport sites in India. Sustainable Energy Technologies and Assessments, 47. pp. 1-18. ISSN 2213-1388. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Solar PV in the airport environment: a review of glare assessment approaches & metrics. Solar Energy, 216. pp. 439-451. ISSN 0038-092X. (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Sustainability at airports: Technologies and best practices from ASEAN countries. Journal of Environmental Management, 299 (113639). pp. 1-15. ISSN 0301-4797. (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Safwan, Shalbi and Norazlianie, Sazali and Muhammad Aliff Ashraff, Rosdi and Faridah, Mohamad Idris (2021) Study on mechanical and shielding properties of barite colemanite concrete. In: IOP Conference Series: Materials Science and Engineering, International Nuclear Science Technology and Engineering Conference (iNuSTEC 2020) , Selangor, Malaysia , 17-19 November 2020. pp. 1-10., 1106 (012009). ISSN 1757-899X (Published)

Sanderasagran, Ashwindran Naidu and Azizuddin, Abd Aziz and Oumer, Ahmed Nurye (2021) Novel bio-hybrid drag induced wind turbine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Response Surface Methodology to Predict the Effects of Graphene Nanoplatelets Addition to Diesel Engine Performance. In: International Conference on Alternative Fuels and Electric Vehicles 2021 , 9-10 December 2021 , Pune, India (Virtual). . (Published)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) A Review of fuel additives' effects and predictions on internal combustion engine performance and emissions. AIMS Energy. (In Press / Online First) (In Press / Online First)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on Graphene Application: Focus on Application as Additive in Internal Combustion Engine. In: International Conference on Technical and Vocational Education and Training (IConTVET 2021) , 4-5 February 2021 , Langkawi (Virtual Mode). . (Unpublished) (Unpublished)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on The Effect of Alcohol Usage as A Fuel Additive in Internal Combustion Engine. International Journal of Advanced Trends in Computer Science and Engineering, 10 (6). pp. 3165-3172. ISSN ISSN 2278-3091. (Published)

Saxena, Anupama Khare and Saxena, Seema and Sudhakar, K. (2021) Energy, economic and environmental performance assessment of a grid-tied rooftop system in different cities of India based on 3E analysis. Clean Energy, 5 (2). 288 -301. ISSN 2515-4230. (Published)

Shehzad, Aamir and Ahmed, Arslan and Quazi, M. M. and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Masjuki, Haji Hassan and Muhammad Asif Javed, Hafiz (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (5). pp. 1-36. ISSN 1996-1073. (Published)

Siti Rabiatull Aisha, Idris (2021) Exploration dive finding the frogfish. UMP News .

Siti Rabiatull Aisha, Idris (2021) Finswimming a contemporary water sport to discover in Malaysia. UMP News .

Siti Rohaida, Mohamed and Saiful Anwar, Che Ghani (2021) Investigation of design space in manufacturing meta-biomaterials by additive manufacturing. IOP Conference Series: Materials Science and Engineering, 1078. 012-024. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Sofiah, A. G. N. and Samykano, M. and Shahabuddin, S. and Kadirgama, K. and Pandey, A. K. and Noor, M. M. (2021) A brief review on thermal behaviour of PANI as additive in heat transfer fluid. Emerging Advances in Integrated Technology, 2 (1). 47 -52. ISSN 2773-5540. (Published)

Sofiah, A. G. N. and Samykano, Mahendran and Pandey, A. K. and Kadirgama, K. (2021) Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments, 48 (101635). pp. 1-32. ISSN 2213-1388. (Published)

Solomin, E. and Selvanathan, S.P. and Kumarasamy, S. and Kovalyov, A. and Maddappa Srinivasa, R. (2021) The comparison of solar-powered hydrogen closed-cycle system capacities for selected locations. Energies, 14 (9). pp. 1-18. ISSN 1996-1073. (Published)

Solomin, Evgeny and Sirotkin, Evgeny and Cuce, Erdem and Selvanathan, Shanmuga Priya and Sudhakar, K. (2021) Hybrid floating solar plant designs: A review. Energies, 14 (10). pp. 1-25. ISSN 1996-1073. (Published)

Soni, R. A. and Sudhakar, K. and Rana, R. S. (2021) Biochemical and thermal analysis of spirulina biomass through FTIR, TGA, CHN. Energy Engineering: Journal of the Association of Energy Engineering, 118 (4). pp. 1045-1056. ISSN 0199-8595. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Effect of PV material, texturing, orientation and tracking on glare impact: A simulation study from an Indian airport. Cleaner Engineering and Technology, 4 (100236). pp. 1-11. ISSN 2666-7908. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Suitability analysis of solar tracking PV system in the airport based on glare assessment. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9061-9070. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sukumaran, Sreenath and Sudhakar, Kumarasamy and Ahmad Fitri, Yusop (2021) A Novel tool for sustainability assessment of energy projects. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

Vignesh, Palani and Pradeep Kumar, A. R. and Ganesh, N. S. and Jayaseelan, V. and Sudhakar, K. (2021) Biodiesel and green diesel generation: An overview. Oil and Gas Science and Technology, 76 (6). pp. 1-15. ISSN 1294-4475. (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. N., Arifin and W., Tasnim (2021) Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. Arabian Journal for Science and Engineering, 46 (8). pp. 7699-7718. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Wan Fadzlina, Wan Muhd Shukeri and Ummu Kulthum, Jamaludin and Mohd Basri, Mat-Nor and Azrina, Md. Ralib (2021) Model-based insulin sensitivity as a new biomarker of sepsis diagnosis in the intensive care unit. IIUM Medical Journal Malaysia, 20 (2). pp. 19-26. ISSN 2735-2285. (Published)

Wan Izzat Aiman, Abdul Manan and Azrin, Saedi and Mohamad Heerwan, Peeie and Mohd Shahrin, Abu Hanifah (2021) Modeling of the network reconfiguration considering electric vehicle charging load. In: Proceedings of the 8th International Conference on Computer and Communication Engineering, ICCCE 2021. 8th International Conference on Computer and Communication Engineering, ICCCE 2021 , 22 - 23 June 2021 , Kuala Lumpur. pp. 1-5. (9467143). ISBN 978-172811064-6 (Published)

Wan Naimah, Wan Ab Naim and Azam, Ahmad Bakir and Mohd Jamil, Mohamed Mokhtarudin and Nik Abdullah, Nik Mohamed and Bee, Ting Chan (2021) The effect of variation of myocardium wall thickness on the evolution of ischemic heart wall stress and movement: A computational modelling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020 , 1 - 3 March 2021 , Langkawi. 298 -302. (9398744). ISBN 978-1-7281-4245-6 (Published)

Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Bee, Ting Chan and Einly, Lim and Azam, Ahmad Bakir and Nik Abdullah, Nik Mohamed (2021) The study of myocardial ischemia-reperfusion treatment through computational modelling. Journal of Theoretical Biology, 509 (110527). pp. 1-11. ISSN 0022-5193. (Published)

Wan Naimah, Wan Ab Naim and Sun, Zhonghua and Liew, Yih Miin and Chan, Bee Ting and Jansen, Shirley and Lei, Jing and Poo Balan, Ganesan and Shahrul Amry, Hashim and Ganiga Srinivasaiah, Sridhar and Lim, Einly (2021) Comparison of diametric and volumetric changes in Stanford type B aortic dissection patients in assessing aortic remodeling post-stent graft treatment. Quantitative Imaging in Medicine and Surgery, 11 (5). pp. 1723-1736. ISSN 2223-4292. (Published)

Wu, Hailong and Depernet, Daniel and Lanfranchi, Vincent and Benkara, Khadija Ei Kadri and M. A. H., Rasid (2021) A novel and simple torque ripple minimization method of synchronous reluctance machine based on torque function method. IEEE Transactions on Industrial Electronics, 68 (1). pp. 92-102. ISSN 0278-0046. (Published)

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Y. Erny, A. M. Y. and Fadhil, A. R. and Aiman, Mohd Halil and Mahadzir, Ishak and Quazi, M. M. (2021) Comparative study between furnace brazing and laser brazing. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-10., 1068 (012003). ISSN 1757-899X (Published)

Yadav, B. K. and Rauniyar, P. K. and Sudhakar, K. and Bajracharya, T. R. and Priya, S. S. (2021) Sustainable green campus in Nepal: 3E analysis. International Journal of Low-Carbon Technologies, 16 (2). pp. 531-542. ISSN 1748-1317. (Published)

Yahya Mohammed, Al-Naggar and Norlida, Jamil and Mohd Firdaus, Hassan and Ahmad Razlan, Yusoff (2021) Condition monitoring based on IoT for predictive maintenance of CNC machines. In: Procedia CIRP: 18th CIRP Conference on Modelling of Machining Operations , 15-17 Jun 2021 , Ljubljana, Slovenia. pp. 314-318., 102. ISSN 2212-8271 (Published)

Yakin, H. N. and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2021) A quasi-brittle damage model in the framework of bond-based peridynamics with adaptive dynamic relaxation method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8617 -8623. ISSN 2231-8380 (online). (Published)

Yunus, M. A. and Abdul Rani, M. N. and Aziz Shah, M. A. S. and M. S. M., Sani and Yahya, Z. (2021) The improvement of bolted joints model via finite element model updating method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8635-8643. ISSN 2231-8380 (online). (Published)

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Hadi, M. Z. I. A. (2021) The effect of quick response manufacturing in factory layout: Assessment using Witness software. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 -20 January 2021 , Pekan, Malaysia. pp. 1-18., 1078 (012027). ISSN 1757-899X (Published)

Z. M., Hafizi and Vorathin, E. (2021) Investigation of low frequency fibre Bragg grating accelerometer based on thermoplastic cantilever beam. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-7., 1078 (012012). ISSN 1757-899X (Published)

Zainordin, A. Z. and Zamri, Mohamed and F., Ahmad (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8577 -8584. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zairul Azrul, Zakaria and Zafri Azran, Abdul Majid and Muhammad Amin, Harun and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Amir, Abdul Razak and Ahmad Fadzil, Sharol (2021) Investigation on the thermal performance of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 48 -64. ISSN 2289-7879. (Published)

Zolpakar, N. A. and Mohd Fuad, Yasak and Pathak, Sunil (2021) A review: Use of evolutionary algorithm for optimisation of machining parameters. International Journal of Advanced Manufacturing Technology, 115 (1-2). 31 -47. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)