Browse by ID Staff

A

Anita, Abdul Rani and Mazni, Ismail and Rosita, Husain and Airin, AbdulGhani (2018) Empowering employees with spiritual intelligence for higher quality food-hygiene practices and food service performance. In: International conference on science, engineering and technology (I-SET 2018) , 1 - 4 May 2018 , Univ of Muhammadiyah, Banda Aceh, Indonesia. pp. 1-6.. (Unpublished)

D

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

F

Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished)

M

Maziyana, Marzuki and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff (2021) Preparation and microstructural characterization of five-layered aluminium-aluminium oxide functionally graded material. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan, Pahang. pp. 1-9., 1092 (012031). ISSN 1757-899X

Mazni, Ismail and Mohamad Muzakkir, Tajuddin and Asmida, Ideris (2019) In Situ Glycine-nitrate Combustion Synthesis of Ni-La/SiO2 Catalyst for Methane Cracking. Industrial and Engineering Chemistry Research, 58 (2). pp. 531-538. ISSN 0888-5885. (Published)

Mazni, Ismail and Rahsya Nur Udzaifa, Abdul Rahman and Ruwaida, Abdul Rasid and Noor Ida Amalina, Ahamad Nordin (2018) Torrefaction of food waste as potential biomass energy sources. In: 4th International Conference of Chemical Engineering & Industrial Biotechnology , 1-2 August 2018 , Seri Pacific Hotel Kuala Lumpur. pp. 1-22.. (Unpublished)

Mazni, Ismail and Ruwaida, Abdul Rasid and R. N. U., Abdul Rahman and N. S., Ahmad and M. A. W., Mohd Radzuan (2019) Integrating microwave heating pre-treatment to improve torrefaction of food waste. In: IOP Conference Series: Materials Science and Engineering, 1st ProSES Symposium 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-8., 702 (012009). ISSN 1757-899X

Muhammad Daniel Haiqal, Mansor and Noor Mazni, Ismail (2022) Compressive strength of the 5cmx5cm coconut empty fruit bunch fiber reinforced cement cubes. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 105-110. ISSN 2636-9575. (Published)

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

N

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nik Ruqiyah, Nik Hassan and Farah Amira, Mohd Ghazali and Abdul Aziz, Jaafar and Noor Mazni, Ismail (2016) Preparation of polypropylene thermoplastic container via thermoforming process. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman and Noraini, Mohd Razali and Suriati, Ghazali (2019) The effect of MAPE compatibilizer agent on the tensile strength of recycled PET/HDPE plastic composite. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 484-489.. ISBN 978-981-15-0950-6

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Suriati, Ghazali and Nuruzzaman, D. M. (2018) Thermal properties of polyethylene reinforced with recycled– poly (ethylene terephthalate) flakes. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 17578981

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) Characterization of tin oxide (SnO2) nanostructures prepared by thermal oxidation. In: AIP Conference Proceedings: 6th International Conference on Production, Energy and Reliability, ICPER 2018 , 13 - 14 Aug 2018 , Kuala Lumpur Convention Center, Kuala Lumpur. pp. 1-6., 2035. ISSN 0094243X ISBN 978-073541761-8

Nuraini, Abdullah and Noor Mazni, Ismail and Nuruzzaman, D. M. (2018) Preparation of tin oxide (SnO2) thin films using thermal oxidation. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nuramirah, Che Lah and Noor Mazni, Ismail (2019) Empty fruit bunch (EFB) fibers as reinforcement in polypropylene. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 84-92. ISSN 2636-9575. (Published)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Mohammad Asaduzzaman, Chowdhury and A. K. M., Asif Iqbal and Noor Mazni, Ismail and Fatchurrohman, Nanang and Chan, Shin Yi (2020) Influence of glass fiber content on the flexural properties of polyamide 6-polypropylene blend composites. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 466-471.. ISBN 978-981-15-0950-6

Nurul Aida, Amir Khatif and Mohamad Aliff Kamil, Awang Kecik and Mohd Ali Hanafiah, Shaharudin and A. K., Prasada Rao and Noor Mazni, Ismail (2015) The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Nurul Husna Elyana, Hanifa and Asmida, Ideris and Mazni, Ismail (2020) Ni–supported palm oil fuel ash catalyst (Ni–POFA) from in situ glycine-nitrate combustion for methane cracking. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-12., 736 (042010). ISSN 1757-899X

Nuruzzaman, D. M. and Iqbal, AKM Asif and Maziyana, Marzuki and Chowdhury, Mohammad Asaduzzaman and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff and Rahman, M. M. and Gebremariam, M. A. (2020) Investigation on microstructure and hardness of aluminium-Aluminium oxide functionally graded material. In: Lecture Notes in Mechanical Engineering; 4th International Manufacturing Engineering Conference and 5th Asia Pacific Conference on Manufacturing Systems, iMEC-APCOMS 2019 , 21 - 22 August 2019 , Putrajaya, Malaysia. 478 -483.. ISSN 2195-4356 ISBN 978-981-15-0950-6

R

Rahsya Nur Udzaifa, Abdul Rahman and Ruwaida, Abdul Rasid and Yong, Yung Sheng and Mazni, Ismail (2024) Evaluation of biofuel from the torrefaction of Malaysian food waste. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Ruwaida, Abdul Rasid and Tai, Xin Yee and Rahsya Nur Udzaifa, Abdul Rahman and Mazni, Ismail (2018) Combining wet rendering with torrefaction to improve the fuel characteristics of biochar from food waste. In: 4th International Conference On Global Sustainability & Chemical Engineering (ICGSCE 2018) , 5 - 6 September 2018 , Kuala Lumpur. pp. 1-15.. (Unpublished)

Ruwaida, Abdul Rasid and Thye, Mei Chin and Mazni, Ismail (2018) An experimental study on the torrefaction of food waste. In: 4th International Conference Of Chemical Engineering And Industrial Biotechnology (ICCEIB 2018) , 1-2 August 2018 , Seri Pacific Hotel, Kuala Lumpur. pp. 74-75..

S

S. N. S., Jamaludin and M. I. A., Latiff and D. M., Nuruzzaman and N. M., Ismail and S., Basri (2020) Investigation on microstructure and hardness of nickel-alumina functionally graded material. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018 , 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 127-132., 29 (Part 1). ISSN 2214-7853

Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Faizal, Mustapha and Nuruzzaman, D. M. and Muhammad Ihsan, Abdul Latiff and Noor Mazni, Ismail (2017) Phase Contamination Characterization of Stepwise-built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. In: 5th International Conference on Engineering and Innovative Materials, ICEIM 2016 , 10 - 12 September 2016 , Kuala Lumpur, Malaysia. pp. 90-96., 889. ISSN 0255-5476

Y

Yong, Yung Sheng and Ruwaida, Abdul Rasid and Ismail, Mazni (2023) The study of torrefaction in air and steam biomass gasification for syngas production through process simulation. In: 2 nd Process System Engineering and Safety (ProSES) Symposium 2021 , 1 December 2021 , Online. , 2792 (1). ISSN 9780735446403