Browse by ID Staff

A

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Zulhishamuddin and S. N., Aqida and E. A., Rahim (2016) Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties. In: AIP Conference Proceedings: 19th International Esaform Conference On Material Forming (ESAFORM 2016) , 27–29 April 2016 , Nantes, France. pp. 1-6., 1769 (030004). ISBN 978-0-7354-1236-1

Abd Rahman, Zulhishamuddin and Mohamed Suffian, Reza and S. N., Aqida and Mohd Rashidi, Maarof (2017) Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE). Materials Research Ibero-american Journal of Materials. pp. 1-7. ISSN ISSN 1516-1439 / ISSN 1980-5373. (Published)

Abdul Fattah, Mohd Tahir and S. N., Aqida (2017) An Investigation of Laser Cutting Quality Of 22MnB5 Ultra High Strength Steel Using Response Surface Methodology. Optics & Laser Technology, 92. pp. 142-149. ISSN 0030-3992. (Published)

Abdulhadi, Hassan A. and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2017) Fatigue Mechanical Behavior of (PMMA) Poly(methacrylate) Under Shot Peening Treatment. Journal of Computational and Theoretical Nanoscience, 14 (6). pp. 2927-2930. ISSN 1546-1955 (Print); ISSN 1546-1963 (Online). (Published)

Abdulhadi, Hassan Abdulrssoul and S. N., Aqida and Izwan, Ismail and M., Ishak and Mohammed, Ghusoon R. (2017) Thermally-Induced Crack Evaluation in H13 Tool Steel. Metals, 7 (11). pp. 475-485. ISSN 2075-4701. (Published)

Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Aqida, S.N. and Shah, L.H and Naher, S. and Brabazon, D. (2023) Rapid solidification processing and bulk metallic glass casting. In: Comprehensive Materials Processing 2nd edition. Elsevier, pp. 1-22. ISBN 9780323960205, eBook ISBN: 9780323960212

Asnul Hadi, Ahmad and Naher, S. and S. N., Aqida and D., Brabazon (2014) Routes to Spheroidal Starting Material for Semi-Solid Metal Processing. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier, Singapore, pp. 135-148. ISBN 9780080965338

B

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

B., Norhafzan and S. N., Aqida and F., Mifthal and A. R., Zulhishamuddin and I., Ismail (2017) Effect of heating time on hardness properties of laser clad gray cast iron surface. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Brubaker, C. E. and Messersmith, P. B. and S. N., Aqida (2016) Biological Adhesion. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-22. ISBN 978-0-12-803581-8

C

C. H., Ng and C. F., Lai and S. N. M., Yahaya and S., Shamsudin and S. N., Aqida and F., Sharrifuddin (2019) Effect of initial blank temperature in hot press forming towards 22MnB5 springback failure. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5137-5149. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

F

Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2020) Effect of tungsten carbide partial dissolution on the microstructure evolution of a laser clad surface. Optics & Laser Technology, 121 (105789). pp. 1-8. ISSN 0030-3992. (Published)

Fazliana, Fauzun and S. N., Aqida and Md Saidin, Wahab (2014) Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties. Advanced Materials Research, 1024. pp. 215-218. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Fazliana, Fauzun and S. N., Aqida and Naher, S. and Brabazon, D. and Calosso, Francesco and Rosso, M. (2014) Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 975-980. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

H

Hartwig, J. B. and Hartwig, J. and S. N., Aqida (2016) X-Ray Topography. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-9. ISBN 978-0-12-803581-8

Hassan, A. Abdulhadi and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2016) Thermal Fatigue of Die-Casting Dies: An Overview. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00032). ISSN 2261-236X

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)

I

I., Ismail and S. N., Aqida (2014) Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application. Key Engineering Materials, 611 (612). pp. 746-755. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

K

Kaminsky, Walter and Boggioni, Laura and Tritto, Incoronata and S. N., Aqida (2019) Cycloolefin Polymerization. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, Netherlands, pp. 843-873. ISBN 978-0-12-803581-8

M

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and S. N., Aqida and Mohammed, Ghusoon R. and Abdulhadi, Hassan A. (2017) Weld bead profile of laser welding dissimilar joints stainless steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Ishak and Siti Rabiatull Aisha, Idris and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611 Manufacturing Processes Laboratory. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-97-8

M. S., Reza and S. N., Aqida and I., Ismail (2016) Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface. Applied Physics A, 122 (611). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

M. S. A., Rahim and I., Ismail and S. A., Wahid and S. N., Aqida (2017) Magnetic Field Simulation of a Thermal Conductivity Measurement Instrument for Magnetorheological Fluid. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01061). ISSN 2261-236X

Mattei, G. and Aqida, S.N. (2024) Optical properties of surface enhanced Raman scattering. In: Encyclopedia of Condensed Matter Physics (Second Edition). Elsevier, pp. 728-738. ISBN 978-0-323-91408-6

Mattei, G. and S. N., Aqida (2016) Optical Properties of Surface Layers Enhanced Raman Scattering. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-11. ISBN 978-0-12-803581-8

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Mohd Toff, Mohd Radzi (2014) An Investigation of Phase Crystallinity in Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. Key Engineering Materials, 611 (612). pp. 1601-1607. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Abdulhadi, Hassan Abdulrssoul (2017) Fiber Laser Welding of Dissimilar 2205/304 Stainless Steel Plates. Metals, 7 (12). pp. 1-19. ISSN 2075-4701. (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2016) The Effect of Fiber Laser Parameters on Microhardness and Microstructure of Duplex Stainless Steel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01024). ISSN 2261-236X

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2017) Effects of Heat Input on Microstructure, Corrosion and Mechanical Characteristics of Welded Austenitic and Duplex Stainless Steels: A Review. Metals, 7 (2). pp. 1-18. ISSN 2075-4701. (Published)

Mohd Salleh, Abdul Rahim and Izwan, Ismail and S. N., Aqida (2017) Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature. Materials Science Forum, 890. pp. 108-111. ISSN 0255-5476. (Published)

Muhammad Amzar Syazani, Mohd Azli and Mahfuzah, Mustafa and Rafiuddin, Abdubrani and Amran, Abdul Hadi and S. N., Aqida and Zarith Liyana, Zahari (2018) Electromyograph (EMG) signal analysis to predict muscle fatigue during driving. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 405-420. ISBN 978-981-13-3708-6

N

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X

Nik Mohamed, Nik Mohd Zuki and Noor, M. M. and Rose, Ahmad Nasser Mohd and Razali, Noraini Mohd and Daud, Rosdi and Shalahim, N. S M and Ahmad, Syarifah Nur Aqida Syed (2008) Development of laser cutting and engraving machine utilising PC-NC controller. , [Research Report: Research Report] (Unpublished)

Norhafzan, B. and Aqida, S. N. and Khairil, C. M. (2021) Optimization of laser melting parameter to enhanced surface properties in hot press forming die. IOP Conference Series: Materials Science and Engineering, 1078 (012020). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Norhafzan, B. and Khairil, C. M. and Aqida, S. N. (2021) Laser cladding process to enhanced surface properties of hot press forming die: A review. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-8., 1078 (012037). ISSN 1757-8981 (Print), 1757-899X (Online)

Norhafzan, Bariman and S. N., Aqida and Fazliana, Fauzun (2017) Laser Melting of High Thermal Conductivity Steel (HTCS) Surface. Materials Science Forum, 890. pp. 380-383. ISSN 1662-9752. (Published)

Nur Najwa, K. A. and Hilmi, M. and Aqida, S.N. and Izwan, Ismail (2024) Hydrophobicity of laser-textured soda-lime glass. Journal of Physics: Conference Series, 2688 (1). pp. 1-11. ISSN 1742-6596. (Published)

Nurain, Abdul Mutalib and Izwan, Ismail and Soffarina M., Soffie and Syarifah Nur Aqida, Syed Ahmad (2019) Rheological Properties of Magnetorheological Polishing Fluid for Micro Mould Polishing. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 490-496.. ISBN 978-981-15-0950-6

Nuraini, Aziz and S. N., Aqida (2013) Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nuraini, Aziz and S. N., Aqida (2014) Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE). Advanced Materials Research, 1024. pp. 243-246. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuraini, Aziz and S. N., Aqida (2013) Optimization of quenching process in hot press forming of 22MnB5 steel for high strength properties for publication in. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6., 50 (1). ISSN 1757-899X

Nuraini, Aziz and S. N., Aqida and I., Ismail (2017) Microstructural analysis of hot press formed 22MnB5 steel. In: 20th International ESAFORM Conference on Material Forming (ESAFORM 2017) , 26-28 April 2017 , University Dublin, Ireland. , 1896 (1). ISSN 0094243X ISBN 978-073541580-5

Nurul Syahrain, Abd Rahman and Mahfuzah, Mustafa and Rosdiyana, Samad and Norizam, Sulaiman and Nor Rul Hasma, Abdullah and Nurul Hazlina, Noordin and Amran, Abdul Hadi and S. N., Aqida (2017) Initial Experiment of Muscle Fatigue During Driving Game Using Electromyography. In: International Conference On System Engineering And Technology (ICSET 2017) , 2-3 October 2017 , Shah Alam, Selangor. pp. 101-105.. ISBN 978-1-5386-0383-3

R

Razali, Mohd Nizar Mhd and Hamedon, Zamzuri B. and Yusoff, A. R. and Ahmad, Syarifah Nur Aqida Syed and Redza, A. and Jamaludin, Ahmad Shahir (2019) Study of an optimal surface property of carbide cutting tool by surface modification method. , [Research Report: Research Report] (Unpublished)

Reza, M. S. and S. N., Aqida and Mohd Toff, Mohd Radzi and Brabazon, D. (2013) Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique. Key Engineering Materials, 554-55. pp. 603-610. (Published)

Reza, M. S. and S. N., Aqida and I., Ismail (2018) Laser surface modification of Yttria Stabilized Zirconia (YSZ) thermal barrier coating on AISI H13 tool steel substrate. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-4., 319 (1). ISSN 17578981

Rusila Zamani, Abd Rashid and Norhasnidawani, Johari and Saiful Amri, Mazlan and Siti Aishah, Abdul Aziz and Nur Azmah, Nordin and Nurhazimah, Nazmi and S. N., Aqida and Mohd Aidy Faizal, Johari (2021) Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. Smart Materials and Structures, 30 (10). pp. 1-2. ISSN 0964-1726. (Published)

S

S. N., Aqida (2008) An Overview of Laser Surface Modification of Die Steels. In: 25th International Manufacturing Conference . pp. 120-128..

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun (2013) Atomic Diffusion in Laser Surface Modified AISI H13 Steel. Applied Physics A, 112 (1). pp. 139-142. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z. and Browne, D. (2010) Laser Micro-Processing Of Amorphous And Partially Crystalline cu45Zr48Al7 Alloy. Applied Physics A: Materials Science and Processing, 101. pp. 357-360. (Published)

S. N., Aqida and Brabazon, Dermot and S., Naher (2013) An Investigation of Phase Transformation and Crystallinity in Laser Surface Modified H13 Steel. Applied Physics A, 110 (3). pp. 673-678. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

S. N., Aqida and Fauzun, Fazliana and Wahab, Md. Saidin (2013) Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties. Key Engineering Materials , 554-55. pp. 596-602. (Published)

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

S. N., Aqida and Maurel, M and Brabazon, D. and Naher, Sumsun and Rosso, M (2009) Thermal Stability Of Laser Treated Die Material For Semi-Solid Metal Forming. International Journal of Material Forming, 2. pp. 761-764. (Published)

S. N., Aqida and Mohamed Reza Zalani, Mohamed Suffian and Mohd Toff, Mohd Radzi and Brabazon, D. (2014) Surface Morphology of Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. In: 17th Annual Esaform Conference on Material Forming , 7-9 May 2014 , Dipoli Congress Centre, Espoo, Finland. pp. 1-8..

S. N., Aqida and Naher, Sumsun and Brabazon, Dermot (2011) Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes. 14th International ESAFORM Conference on Material Forming: AIP Conference Proceedings, 1353. pp. 1081-1086. (Published)

S. N., Aqida (2013) UMP dan 3 Universiti Asia kongsi kepakaran dalam teknologi acuan tekap. CREATE . p. 33. ISSN 1823-7487

S. N., Aqida (2014) An overview of cast hot press forming die materials. Auto Inexss (8). ISSN 1985-8434

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Sheng, Annie Lau and Izwan, Ismail and Fazliana, Fauzun and S. N., Aqida (2019) Surface Roughness of Laser Modified Die Surface Change Under Thermal Cyclic Loading. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 441-447.. ISBN 978-981-15-0950-6

Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)

T

Taguchi, S. and Iwata, T. and Abe, H. and Doi, Y. and S. N., Aqida (2016) Poly(hydroxyalkanoate)s. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-28. ISBN 978-0-12-803581-8

W

Wintermantel, E. and Mayer, J. and Goehring, T. N. and S. N., Aqida (2016) Composites for Biomedical Applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-8. ISBN 978-0-12-803581-8

Y

Yap, Suk Wy and Norhasnidawani, Johari and Saiful Amri, Mazlan and Aqida, S. N. and Arifin, Rizal and Noor Azlina, Hassan and Mohd Aidy Faizal, Johari (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854. (Published)

Z

Zulhishamuddin, A. R. and S. N., Aqida (2014) Development High Thermal Conductivity Tool Steel on Hot Press Forming: An Overview. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10..

Zulhishamuddin, A. R. and S. N., Aqida and Mohd Rashidi, Maarof (2018) A comparative study on wear behaviour of Cr/Mo surface modified grey cast iron. Optics & Laser Technology, 104. pp. 164-169. ISSN 0030-3992. (Published)