Browse by ID Staff

A

Ahmad, Asnul Hadi and Leman, Z. and Azmir, M. A. and Muhammad, Khairul Fikri and Wan Harun, Wan Sharuzi and Alias, J. and Alias, A. B. S. (2009) Optimization of warpage defect in injection moulding process using ABS material. In: 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009 , 25 - 26 May 2009 , Bundang, Indonesia. pp. 470-487. (5072032). ISSN 2376-1172 ISBN 978-076953648-4

Ahmad Ridwan, Abdullah and Nur Aidah Nabihah, Dandang and Nur Zalikha, Khalil and W. S., Wan Harun (2017) Effect of Sintering Temperature on Physical Properties & hardness of CoCrMo alloys fabricated by metal injection moulding process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012010). ISSN 1757-899X

Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)

Amirruddin, A. K. and Rahman, M. M. and Noor, M. M. and Ramasamy, D. and Harun, W. S W Investigation of dispersion, stability, and tribological performance of oil-based graphene and copper nanofluids. , [Research Report: Research Report] (Unpublished)

Anbananthan Pillai, Munanday and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and K., Kadirgama and Ahmad Shahir, Jamaludin (2023) Analysis of convolutional neural networks for facial expression recognition on GPU, TPU and CPU. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 50-67. ISSN 2462-1943. (Published)

Arjun, Asogan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Devarajan, Ramasamy and Kumaran, Kadirgama (2023) Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 326-333. ISSN 2462-1943. (Published)

Aslfattahi, Navid and Loni, Reyhaneh and Bellos, Evangelos and Najafi, Gholamhassan and Kadirgama, K. and Wan Harun, Wan Sharuzi and Saidur, R. (2021) Efficiency enhancement of a solar dish collector operating with a novel soybean oil-based-MXene nanofluid and different cavity receivers. Journal of Cleaner Production, 317 (128430). pp. 1-16. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

B

Buhairi, Minhalina Ahmad and Mohd Foudzi, Farhana and Jamhari, Fathin Iliana and Sulong, Abu Bakar and Mohd Radzuan, Nabilah Afiqah and Muhamad, Norhamidi and Mohamed, Intan Fadhlina and Azman, Abdul Hadi and Wan Sharuzi, Wan Harun and M.S.H., Al-Furjan (2023) Review on volumetric energy density: inluence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 23639512. (Published)

D

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin Wax Removal from Metal Injection Moulded Cocrmo Alloy Compact by Solvent Debinding Process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-10., 257 (012020). ISSN 1757-899X

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin wax removal from metal injection moulded cocrmo alloy compact by solvent debinding process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012020). ISSN 1757-8981

Dayangku Noorfazidah, Awang Sh'ri and Muhammad Abdul Hisyam, Abu Hassan and Zahiruddeen Salam, Zahari and W. S., Wan Harun (2019) Finite element simulation of equal channel angular pressing: effect of die angle and number of passes. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6402-6414. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

F

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and W. S., Wan Harun and M. M., Yusoff (2019) Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering. International Journal of Biological Macromolecules, 122. pp. 562-571. ISSN 0141-8130. (Published)

I

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online)

J

J., Kananathan and Sofiah, A. G. N. and Mahendran, Samykano and S., Ulakanathan and Nurul Akmal, Che Lah and W. S., Wan Harun and K., Sudhakar and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of Boric Acid (H3BO3) Concentration on the Physical Properties of Electrochemical Deposited Nickel (Ni) Nanowires. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012033). ISSN 1757-899X

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X

J., Mogan and W. S. W., Harun and K., Kadirgama and D., Ramasamy and F. M., Foudzi and A. B., Sulong and F., Tarlochan and F., Ahmad (2023) Fused Deposition Modelling of Polymer Composite: A Progress. Polymers, 15 (1). pp. 1-27. ISSN 2073-4360. (Published)

Jayabharty, Mogan and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Parameter influence on mechanical properties of ABS; using FDM. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 68..

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Juliawati, Alias and W. S., Wan Harun and Mas Ayu, Hassan (2019) A Review on the Preparation of Magnesium-Based Alloys Prepared by Powder Metallurgy and the Evolution of Microstructure and Mechanical Properties. Key Engineering Materials, 796. pp. 3-10. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

K

K., Kadirgama and M. M., Noor and M. M., Rahman and W. S., Wan Harun (2009) Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling. European Journal of Scientific Research, 30 (3). pp. 451-463. ISSN 1450-216X. (Published)

K., Kadirgama and W. S., Wan Harun and Tarlochan, F. and Mahendran, Samykano and D., Ramasamy and Mohd Zaidi, Azir and Mehboob, H. (2018) Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 495-510. ISSN 0268-3768. (Published)

Kananathan, Jeeven and Samykano, Mahendran and Sudhakar, K. and Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and Manoj Kumar, Nallapaneni and W. K., Ngui and K., Kadirgama and Azmi, W. H. and W. S., Wan Harun (2018) Nanofluid as coolant for grinding process: An overview. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-16., 342 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) A Global Outreach by two Malaysians Success Story Unveiled. UMP News .

Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) The trend of 3D Printing in higher TVET skill level. UMP News . (Unpublished)

Kumaresan, Rajan and Mahendran, Samykano and Kumaran, Kadirgama and Wan Sharuzi, Wan Harun and Rahman, Md. Mustafizur (2022) Fused deposition modeling: process, materials, parameters, properties, and applications. The International Journal of Advanced Manufacturing Technology, 120. pp. 1531-1570. ISSN 1433-3015 (Online); 0268-3768 (Printed). (Published)

L

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

M

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and R., Saidur (2022) Experimental study on properties of hybrid stable & surfactant-free nanofluids GNPs/CNCs (Graphene nanoplatelets/cellulose nanocrystal) in water/ethylene glycol mixture for heat transfer application. Journal of Molecular Liquids, 348 (118019). pp. 1-10. ISSN 0167-7322. (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020) , 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

M. A., Anwar and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Oumar, A. N. and Nandyanto, A. B. D. (2017) Morphology Evaluation of ZrO2 Dip Coating on Mild Steel and its Corrosion Performance in NaOH Solution. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (012087). ISSN 1757-899X

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

M. F. F. A., Hamidi and W. S., Wan Harun (2017) Evaluation of mechanical properties for open cellular structure 17-4 PH stainless steel alloy fabricated by selective laser melting process. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 122-123. ISBN 9789670257884

M. F. F. A., Hamidi and W. S., Wan Harun and M., Samykano and S. A., Che Ghani and Z., Ghazalli and F., Ahmad and A. B., Sulong (2017) A Review of Biocompatible Metal Injection Moulding Process Parameters for Biomedical Applications. Materials Science and Engineering: C, 78. pp. 1263-1276. ISSN 0928-4931. (Published)

M. F. F. A., Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and S. A., Che Ghani and M. Z., Azir (2017) Study of Solvent Debinding Parameters for Metal Injection Moulded 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012035). ISSN 1757-899X

M. H., Muhammad Sidik and S. A., Che Ghani and M., Ishak and W. S., Wan Harun and N., Daud (2020) A Review on Electric Wheelchair Innovation to Ease Mobility and As a Rehabilitation Tool for Spinal Cord Impairment Patient. International Journal of Engineering and Technology, 10 (3). pp. 803-815. ISSN 0975-4024. (Published)

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6..

M. N. M., Baharuddin and Norazwani, Muhammad Zain and Eida Nadirah, Roslin and Wan Sharuzi, Wan Harun and Zaeime, Sulong@Zakaria (2019) Physical properties of homogeneous particleboard based on acacia tree and polyurethane adhesive as a resins. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3382-3387. ISSN 2249-8958. (Published)

M. Z., Azir and W. S. W., Harun and K., Kadirgama (2020) A mechanical property evaluation of Ti6Al4V cellular lattice structures fabricated by selective laser melting. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-12., 788 (012010). ISSN 1757-8981 (Print), 1757-899X (Online)

Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X

Mahamude, Abu Shadate Faisal and Muhamad Kamal, Kamarulzaman and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Rosli, Abu Bakar and Yusaf, Talal and Subramanion, Sivarao and Yousif, Belal (2022) A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids. Energies, 15 (4). ISSN 1996-1073. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Salih, Khalid and Yusaf, Talal (2022) Experimental study on the efficiency improvement of flat plate solar collector using hybrid nanofluids graphene/waste cotton. Energies, 15 (2309). pp. 1-27. ISSN 1996-1073. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Manam, N.S. and W. S., Wan Harun and Awang Shri, Dayangku Noorfazidah and Saiful Anwar, Che Ghani and Kurniawan, Tedi and M. H., Ismail and M. H. I., Ibrahim (2017) Study of Corrosion in Biocompatible Metals for Implants: A RevieW. Journal of Alloys and Compounds, 701. pp. 698-715. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Minhalina, Ahmad Buhairi and Farhana, Mohd Foudzi and Fathin Iliana, Jamhari and Abu Bakar, Sulong and Nabilah Afiqah, Mohd Radzuan and Norhamidi A., Muhamad and Intan Fadhlina, Mohamed and Abdul Hadi, Azman and Wan Sharuzi, Wan Harun and Al-Furjan, M. S.H. (2023) Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 2363-9512. (Published)

Mohammad Shahrul Nizam, Amin Nuddin and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and K., Kadirgama and D., Ramasamy and Wan Sharuzi, Wan Harun (2023) A study on adjustable height stand for temperature scanner. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 115-125. ISSN 2462-1943. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Osada, Toshiya and S. A., Che Ghani and Dayangku Noorfazidah, Awang Shri (2017) Effect of sintering parameters on physical properties of SS 316L alloy compact. Journal of Mechanical Engineering, SI 3 (2). pp. 123-131. ISSN 1823- 5514 (Print); 2550-164X (Online). (Published)

Mohd Faizul Farhan, Ahmad Hamidi and Wan Sharuzi, Wan Harun and Faiz, Ahmad and Abu Bakar, Sulong (2016) Effect of Binders on Physical and Mechanical Properties of Stainless Steel 316L Alloy Fabricated by Metal Injection Moulding Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 85-88..

Mohd Hafizu, Zakaria and Saiful Anwar, Che Ghani and Wan Sharuzi, Wan Harun and Zuriadi, Zaulkafilai and Siti Rohaida, Mohamed (2017) Fabrication of aluminium internally cooled cutting tool by means of selective laser melting (SLM). Journal of Mechanical Engineering, SI 3 (1). pp. 185-198. ISSN 1823-5514. (Published)

N

Naseer, Abqaat and Faiz, Ahmad and Aslam, Muhammad and Beh, Hoe Guan and Wan Sharuzi, Wan Harun and Norhamidi, Muhamad and Muhammad Rafi, Raza and German, Randall M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Nur Aidah Nabihah, Dandang and W. S., Wan Harun and Nur Zalikha, Khalil and Muhammad Hussain, Ismail and Rosdi, Ibrahim (2017) Physical Properties and Microstructure Study of 316L SS Fabricated by Metal Injection Moulding Process. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100016). ISBN 978-0-7354-1589-8

Nur Khaleeda, Romli and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and W. S., Wan Harun and Salwani, Mohd Salleh and Mohamad Nazirul Mubin, Merzuki (2017) The Behavior Of Aluminium Carbon/Epoxy Fibre Metal Laminate Under Quasi-Static Loading. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-12., 257 (012046). ISSN 1757-8981 (Print); 1757-899X (Online)

Nur Syawanie, Manam and W. S., Wan Harun and Mohd Halim Irwan, Ibrahim and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 37-52. ISSN 1368-2148. (Published)

Nur Syawanie, Manam and Wan Sharuzi, Wan Harun and Mohd Halim Irwan, Ibrahim (2016) Experimental Study of Solvent Debinding on Water Soluble PEG Behavior for Water Atomised SS 316L Compact. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 187-192..

Nurhanis Sofiah, Abd Ghafar and Kananathan, J. and Samykano, Mahendran and Ulakanathan, S. and S. A., Che Ghani and W. S., Wan Harun and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Electrochemical Deposited Nickel Nanowires: Influence of Deposition Bath Temperature on the Morphology and Physical Properties. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012032). ISSN 1757-899X

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Wan Sharuzi, Wan Harun and Kananathan, J. and Samykano, Mahendran and Nurul Akmal, Che Lah and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and SpaKuantan, Pahang; Malaysia. pp. 1-7., 257 (1). ISSN 17578981

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and Nur Zalikha, Khalil and F., Ahmad and M. H., Ismail and S., Sharif (2017) Effect of Heat Treatment on Mechanical Properties and Microstructure of Selective Laser Melting 316L Stainless Steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012021). ISSN 1757-899X

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Mohd Asnawi, Omar and Mohd Hazlen, Ramli and Muhammad Hussain, Ismail (2017) Physical Properties and Microstructure Study of Stainless Steel 316L Alloy Fabricated by Selective Laser Melting. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100015). ISBN 978-0-7354-1589

Nurul Kamariah, Md Saiful Islam and Wan Sharuzi, Wan Harun and S. A., Che Ghani and Z., Ghazalli and Dayangku Noorfazidah, Awang Sh'ri and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat (2017) Manufacture by Selective Laser Melting & Physical Behaviour of Commercial 316L Stainless Steel. In: iMEDITEC 2017 Proceeding International Medical Device and Technology Conference , 6-7 September 2017 , Johor Bahru, Malaysia. pp. 87-89.. ISBN 978-967-0194-93-6

R

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mahendran, Samykano and Nurul Akmal, Che Lah and S. A., Che Ghani and F., Tarlochan and M. R., Raza (2017) Corrosion and Surface Modification on Biocompatible Metals: A Review. Materials Science and Engineering: C, 77. pp. 1261-1274. ISSN 0928-4931. (Published)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mas Ayu, Hassan and S. A., Che Ghani and Z., Buyong (2016) A Review of Hydroxyapatite-Based Coating Techniques: Sol–Gel and Electrochemical Depositions on Biocompatible Metals. Journal of the Mechanical Behavior of Biomedical Materials, 57. pp. 95-108. ISSN 1751-6161. (Published)

Rahil Izzati, Mohd Asri and Wan Sharuzi, Wan Harun and Asmara, Y. P. (2016) Effect of Acid Pickling on Microstructure and Surface Roughness of 316L Stainless Steel. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 142-146..

Rajan, K. and Kottasamy, A. and Mogan, J. and Sandanamsamy, L. and M., Samykano and K., Kadirgama and Wan Sharuzi, Wan Harun (2023) Preliminary investigation on the tensile properties of FDM printed PLA/copper composite. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 351 -361., 882. ISSN 1876-1100 ISBN 978-981191576-5 (In Press / Online First)

S

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zakri, Ghazalli (2017) Progressive Tool Flank Wear And Surface Roughness When Turning AISI 1017 Mild Steel Using Reduced Thickness Inserts In Finishing Cutting Conditions. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-5., 1901 (040003). ISBN 978-0-7354-1589-8

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zaulkafilai, Z. (2016) Dimensional Accuracy Of Internal Cooling Channel Made By Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) Processes In Fabrication Of Internally Cooled Cutting Tools. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (8). ISSN 2261-236X

S. A., Che Ghani and Mohd Nasri, Muda and Mueller, Timo Michael and W. S., Wan Harun and Saiful Nizam, Tajuddin and M., Ishak and Anwaruddin, Hisyam (2017) Improvement of Agarwood Oil Extraction by Heat Transfer Control in Multiple Hydrodistillation Systems. In: Proceedings of 4th National Conference on Knowledge Transfer (NCKT'17) , 4-5 December 2017 , Knowledge Transfer Centre, Universiti Sains Malaysia. pp. 1-5.. ISBN 978-967-394-X-X.

S. A., Che Ghani and Siti Rohaida, Mohamed and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2017) Physical Evaluations of Co-Cr-Mo Parts Processed using Different Additive Manufacturing Techniques. In: AIP Conference Proceedings: Proceedings of the 3rd Advanced Materials Conference 2016 (3rd AMC 2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-6., 1901 (100001). ISBN 978-0-7354-1589-8

Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed and Munirah, Sha’ban and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2020) Experimental investigation of biological and mechanical properties of CoCrMo based selective laser melted metamaterials for bone implant manufacturing. Procedia CIRP, 89. pp. 79-91. ISSN 2212-8271. (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M., Samykano and W. S., Wan Harun and R., Saidur (2019) Statistical approach for prediction of thermal properties of CNC and CNC-CuO nanolubricant using Response Surface Methodology (RSM). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-14., 788 (012016). ISSN 1757-899X

Samykano, M. and Rahman, M. M. and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Reza, M. S. and Harun, W. S W and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system. , [Research Report: Research Report] (Unpublished)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Liew, Kia Wai and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . and Sivaraos, Subramaniam (2024) Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . (2024) Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 19-34. ISSN 2756-8210. (Published)

Sandanamsamy, L. and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Investigation of mechanical properties of 3d-printed polylactic acid (PLA). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 69..

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)

Shahed, Chowdhury Ahmed and Faiz, Ahmad and Günister, Ebru and Farhana, Mohd Foudzi and Ali, Saad and Malik, Khurshid and Wan Sharuzi, Wan Harun (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys : A review. Journal of Magnesium and Alloys. pp. 1-21. ISSN 2213-9567. (Published)

Siti Rohaida, Mohamed and S. A., Che Ghani and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2016) Evaluations of Co-Cr-Mo meta-biomaterial manufactured by selective laser melting for orthopaedic application. In: Symposium & Exhibition on Additive Manufacturing , 26 July 2016 , The Light Hotel, Seberang Jaya, Penang. pp. 1-5.. (Unpublished)

Syazwan Izharuddin, Mohamad Sabri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Sharuzi, Wan Harun and K., Kadirgama and D., Ramasamy (2023) Investigation on water quality for farmed aquatic species by IoT monitoring system. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 317-327. ISSN 2462-1943. (Published)

T

T., Mueller and S. A., Che Ghani and W. S., Wan Harun and A. H., Abdullah (2017) Optimization of small agarwood hydrodistillation systems: An analytical study to determine the required cooling water flow for optimal operation of an agarwood-hydrodistillation system. In: International Innovation Technology Exhibition & Conferences 2017 (iTec17) , 11 September 2017 , Kolej Kemahiran Tinggi MARA (KKTM), Kemaman, Terengganu. pp. 1-6.. (Unpublished)

W

W. S., Wan Harun and Kamariah, M. S. I. N. and N., Muhamad and S. A., Che Ghani and F., Ahmad and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and Norhamidi, Muhamad and S. A., Che Ghani and Ahmad, Faiz and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Nursyawani, Manam and Nurul Kamariah, Md Saiful Islam and Safian, Sharif and Ahmad Hafiz, Zulkifly and Ishtiaq, Ahmad and Miura, Hideshi (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technology, 331. pp. 74-97. ISSN 0032-5910. (Published)

W. S., Wan Harun and R. I. M., Asri and F. R. M., Romlay and S., Sharif and N. H. M., Jan and F., Tsumori (2018) Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel. Journal of Alloys and Compounds, 748. pp. 1044-1052. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

W. S., Wan Harun and R. I. M., Asri and Juliawati, Alias and Farah Hanani, Zulkifli and K., Kadirgama and S. A., Che Ghani and Jun Haslinda, Haji Shariffuddin (2018) A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials. Ceramics International, 44 (2). pp. 1250-1268. ISSN 0272-8842. (Published)

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

Wan Sharuzi, Wan Harun (2013) Experimental and numerical studies on superhigh strengthening sintered low alloy steels fabricated by metal injection molding). PhD thesis, Kyushu University (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Sharuzi, Wan Harun (2020) Malaysia hungers for more Professional Engineers. UMP News .

Wan Sharuzi, Wan Harun (2020) Our nation desperate for more Professional Engineer. UMP News .

Wan Sharuzi, Wan Harun (2024) Pilihan laluan jurutera profesional di Malaysia A, B atau C. UMPSA News .

Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, R. and Norazlianie, Sazali (2023) A route to a high-impact journal article: The most functional strategy in modern history. Penerbit UMPSA, Pahang. ISBN 978-967-2831-95-2

Wan Sharuzi, Wan Harun and Mohd Fairusham, Ghazali and Norazlianie, Sazali and Mohamad Huzaimy, Jusoh and Shahrul Niza, Mokhatar (2023) Steps to become a professional engineer in Malaysia. Penerbit UMPSA, Pahang. ISBN 9789672831914

Y

Yusaf, Talal and Mahamude, Abu Shadate Faisal and Farhana, Kaniz and Wan Sharuzi, Wan Harun and Kadirgama, Kumaran and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Subramonian, Sivarao and Hall, Steve and Dhahad, Hayder Abed (2022) A comprehensive review on graphene nanoparticles : Preparation, properties, and applications. Sustainability (Switzerland), 14 (12336). pp. 1-32. ISSN 2071-1050. (Published)

Z

Z. S., Zahari and Dayangku Noorfazidah, Awang Sh'ri and M. A.H., Abu Hassan and W. S., Wan Harun (2019) Effect of ECAP die angle to the microstructure and mechanical properties of bulk nanostructured Al-6061. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981