Browse by ID Staff

A

A. A., Ibrahim and P. L., Chong and V. S., Rajasekharan and M. M., Ali and O. S., Zaroog and A. N., Oumer (2020) Investigation of the effect of different materials on convective heat transfer. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). pp. 6642-6651. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Ibrahim, Abdulwehab and Ahmed, Hazwan Aizat and Lin, Chong Perk and G. Zewge, Mesfin and A. N., Oumer (2018) Computational fluid dynamics analysis of multiphase flow in crude oil pipelines. In: Advances in Science and Engineering Technology International Conferences (ASET 2018) , 6 February-5 April 2018 , Dubai, Sharjah, Abu Dhabi, United Arab Emirates;. pp. 1-8.. ISBN 978-153862399-2

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

A. N., Oumer and Azizuddin, Abd Aziz and Noor Azirhan, Sahat (2018) Numerical investigation on effect of blade shape for stream water wheel performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A. N., Oumer and Bachtiar, Dandi (2014) Modeling and Experimental Validation of Tensile Properties of Sugar Palm Fiber Reinforced High Impact Polystyrene Composites. Fibers and Polymers, 15 (2). pp. 334-339. ISSN 1229-9197 (Print); 1875-0052 (Online). (Published)

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. N., Oumer and N. M., Hamidi and Idris, Mat Sahat (2015) Numerical Prediction of Flow Induced Fibers Orientation in Injection Molded Polymer Composites. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2016) Numerical Simulation on Flow and Heat Transfer Characteristics of Supercritical Fluids in Mini-Channels. Journal of Advances in Technology and Engineering Research. pp. 1-5. ISSN 2414-4592. (Published)

Adam, A. Y. and A. N., Oumer and G., Najafi and M., Ishak and F., Basrawi and Aklilu, T. B. (2019) State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers. Journal of Thermal Analysis and Calorimetry. pp. 1-30. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online). (Published)

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590..

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Air Distributor Designs for Fluidized Bed Combustors: A Review. Engineering, Technology & Applied Science Research, 6 (3). pp. 1029-1034. ISSN 1792-8036. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Improvement On Particulate Mixing Through Inclined Slotted Swirling Distributor In A Fluidized Bed: An Experimental Study. Advanced Powder Technology, 27 (5). pp. 2102-2111. ISSN 0921-8831. (Published)

Aklilu, T. B. and Kar, Kin Looi and A. N., Oumer and Khairul, Habib (2019) Thermoelectric Air-Conditioning System: Building Applications and Enhancement Techniques. International Journal of Air-Conditioning and Refrigeration, 27 (2). pp. 1-17. ISSN 2010-1333. (Published)

Akramin, M. R.M. and Sidek, Mohd Zaidi and Oumer, Ahmed Nurye and Amirruddin, A. K. and Hassan, Wan Anuar Wan and Mahdhir, Mohd Yusof (2017) Development of the overlay formulation in finite element model. , [Research Report: Research Report] (Unpublished)

Ang, Chan Mun and Hagos, F. Y. and R., Mamat and A. N., Oumer and Azmi, W. H. (2015) Modelling Phase Change Material for Concentrating Energy Storage in Solar Thermal Cooking Stove. In: International Conference on Mechanical Engineering and Advanced Material 2015 , 3-4 December 2015 , Kota Kinabalu, Sabah. pp. 4-11., 1 (1).

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and A. N., Oumer (2020) A moment coefficient computational study of parametric drag-driven wind turbine at moderate tip speed ratios. Australian Journal of Mechanical Engineering. pp. 1-15. ISSN 1448-4846. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2023) A low-cost digital torquemeter coordinated by arduino board. International Journal of Integrated Engineering, 15 (1). 118 -130. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Azli, Abd Razak (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design. Journal of Mechanical Engineering, 17 (3). pp. 55-68. ISSN 1823-5514. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X

At-Tasneem, Mohd Amin and A. N., Oumer and W. H., Azmi and K., Sulihaakma (2019) Mechanical process and size characterisation of rice husk, mango bark and mango leaves as a drag reduction additive. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022112). ISSN 1757-899X

B

Baheta, Aklilu Tesfamichael and Oumer, A. N. and Hailegiorgis, Sintayehu M. (2018) Analysing the Thermal Performance of Heat Pipe Using Copper Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 2289-7879. (Published)

C

Chen, J. L. T. and Oumer, A. N. and Azizuddin, Abd Aziz (2020) Stability and density analysis of mango bark and mango leaf nanofluids. In: IOP Conference Series: Materials Science and Engineering; Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863 (012061). ISSN 1757-899X

Chen, James Lau Tze and Azizuddin, Abd Aziz and A. N., Oumer and Mohd Hazwan, Yusof (2019) Energy efficiency analysis in office building through thermal modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (1). ISSN 1757-8981

F

Faeeza, Abdul Halim and Firdaus, Basrawi and Ahmad Syazwan, Ramli and Oumer, A. N. and Nurul Aini, Mohd Azman (2022) Effect of surface roughness and temperature on the performance of low-temperature vacuum drying with induced nucleation boiling method in dewatering stingless bees honey. Drying Technology. pp. 1-13. ISSN 0737-3937. (In Press / Online First) (In Press / Online First)

G

G., Sashwin Nair and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan (2021) Flow and heat transfer simulation analysis of 3D compact heat exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 71-87. ISSN 2289-7879. (Published)

H

Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)

Hagos, Ftwi Yohaness and Azmi, W. H. and Mamat, Rizalman and Abdullah, Abdul Adam and Aziz, Amir and Oumer, Ahmed Nurye (2017) Experimental and numerical investigation of phase material as heat storage from a concentrating solar collector. , [Research Report: Research Report] (Unpublished)

Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online)

I

Idris, Mat Sahat and Oumer, Ahmed Nurye and Zulkifli, Ahmad@Manap and Mohd Ruzaimi, Mat Rejab (2018) Investigation of fibre reinforcement toward polymer production emphasizing fused deposition modelling. , [Research Book Profile: Research Report] (Unpublished)

Inn, Lai Qit and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Numerical Analysis of Battery Thermal Management System of Electric Vehicle. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 106-114. ISSN 2735-0142. (Published)

J

James Lau, Tze Chen and A. N., Oumer and Azizuddin, Abd Aziz and M. A., At-Tasneem (2019) Preparation and characterisation of mango bark and mango leaf nanoparticles for lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

Jamiluddin, Jaafar and Siregar, J. P. and A. N., Oumer and Mohammad Hazim, M. Hamdan and Tezara, C. and Mohd Sapuan, Salit (2018) Experimental Investigation on Performance of Short Pineapple Leaf Fiber Reinforced Tapioca Biopolymer Composites. BioResources, 13 (3). pp. 6341-6355. ISSN 1930-2126. (Published)

K

Khor, Ai Chia and Mohd Rusllim, Mohamed and M. H., Sulaiman and Hamdan, Daniyal and A. N., Oumer and P. K. , Leung (2016) Numerical Investigation on Serpentine Flow Field and Rhombus Electrolyte Compartment of Vanadium Redox Flow Battery (V-RFB). ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6715-6720. ISSN 1819-6608. (Published)

L

Luqman, Abdul Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Nurul Aini, Mohd Azman and Oumer, Ahmed Nurye and Shamsul Bahri, Abd Razak (2022) Pulsation-assisted fluidised bed drying of heat-sensitive and sticky materials: effect of basic parameter, and pulsation-specific parameter. Particulate Science and Technology. pp. 1-14. ISSN 0272-6351 (Print); 1548-0046 (Online). (Published)

Luqman, Abdul Halim and Firdaus, Basrawi and Chong, Jia Zheng and Oumer, A. N. and Ahmmad Shukrie, Md Yudin and Mohd Hazwan, Yusof and Shaharin, A Sulaiman (2018) Preliminary study on drying of stingless bee pot pollen using novel fluidized bed dryer with swirling distributor. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-5., 225 (04007). ISSN 2261-236X

Luqman, Abdul Halim and Mohamad Firdaus, Basrawi and Azizuddin, Abd Aziz and Zulkifli, Mustafa and Oumer, A. N. and Ahmad Syazwan, Ramli (2017) A new cooling technique for stingless bees hive. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2017 (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131 (03013). ISSN 2261236X

M

M., Zalinawati and Siregar, J. P. and Tezara, C. and Jaafar, J. and M. H. M., Hamdan and Oumer, A. N. and T., Rihayat (2020) Effect of surface modification on mechanical properties of buri palm (Corypha Utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and Oumer, A. N. (2022) Modelling and optimization of energy efficient assembly line balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

M. H. M., Hamdan and Siregar, J. P. and Tezara, C. and Rusiyanto, R. and Oumer, A. N. and J., Jaafar and M., Zalinawati (2021) Effect of fabric orientations on mechanical properties of hybrid jute-ramie reinforced unsaturated polyester composites. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-13., 700 (1). ISSN 1755-1307

Moey, L. K. and Tok, R. J. and Tai, V. C. and Mathew, P. Reuben and Wu, J. Kai-Seu and Oumer, A. N. (2023) Investigation of opening position on natural cross ventilation for an isolated building. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 825 -838.. ISSN 2195-4356 ISBN 978-981191456-0

Moey, L.K. and Alyazidi, S. M. S. and Tai, V. C. and Kai-Seun, J. W. and Mathew, P. R. and Oumer, A. N. (2023) Effect of opening ratios with and without louvers in cross ventilation using CFD. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 579 -594.. ISSN 2195-4356 ISBN 978-981191456-0

Mohamed, Amir Izzani and Oumer, Ahmed Nurye and Jadin, Mohd Shawal (2017) Development of peltier cooling system for automotive. , [Research Report: Research Report] (Unpublished)

Mohamed Mokhtarudin, Mohd Jamil and Oumer, Ahmed Nurye and Adib, M. A.H.M. and Jalıl, Muhammad Hilmi and Einly, Lim and Ahmad Hafiz, Zulkifly (2019) Development of brain tissue swelling predictive tools for ischaemic stroke patient post-treatment. , [Research Report: Research Report] (Unpublished)

Mohammed Hamood Hezam, Alshameri and Oumer, Ahmed Nurye and Azizuddin, Abd Aziz (2021) Novel compact fin and tube heat exchanger made of reinforced composite plate fins. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Mohd Amin, At-Tasneem and Wan Azmi, Wan Hamzah and Oumer, Ahmed Nurye (2021) Thermal conductivity and dynamic viscosity of mono and hybrid organic- and synthetic-based nanofluids: A critical review. Nanotechnology Reviews, 10 (1). pp. 1624-1661. ISSN 2191-9097. (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Oumer, Ahmed Nurye (2022) Modelling and optimization of energy efficient assemblyline balancing using modified moth flame optimizer. International Journal of Integrated Engineering, 14 (1). pp. 25-39. ISSN 2229-838X. (Published)

N

N. F., Yah and M. S., Idris and A. N., Oumer (2016) Numerical Investigation on Effect of Immersed Blade Depth on the Performance of Undershot Water Turbines. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00035). ISSN 2261-236X

N. M. M., Ammar and Nasir, Ali and M. S., Idris and A. N., Oumer (2013) Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity. Applied Mechanics and Materials, 465-46. pp. 557-561. ISSN 1662-7482. (Published)

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and A. Y., Adam (2016) Numerical Analysis of Flow and Heat Transfer Characteristics of CO2 at Vapour and Supercritical Phases in Micro-Channels. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00011). ISSN 2261-236X

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and Hassan, Ibrahim and F., Basrawi and A. Y., Adam (2017) Model Validation for Flow and Heat Transfer Characteristics of Supercritical CO2 in Mini-Channels. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4312-4317. ISSN 1819-6608. (Published)

Naidu Sanderasagran, Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. (2020) A rudimentary computational assessment of low tip speed ratio asymmetrical wind turbine blades. International Journal of Integrated Engineering, 12 (4). pp. 89-103. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Nor F., Yah and A. N., Oumer and Mat S., Idris (2017) Small Scale Hydro-Power as a Source of Renewable Energy in Malaysia: A Review. Renewable and Sustainable Energy Reviews, 72. pp. 228-239. ISSN 1364-0321. (Published)

Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, M. L. and A. N., Oumer (2016) Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and A. N., Oumer and Ismail, N. M. and Basri, S. (2016) Experimental Investigation on the Mechanical Properties of Glass Fiber Reinforced Nylon. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

O

Oumer, A. N. and Chen, James Lau Tze and Azizuddin, Abd Aziz (2019) A review on thermo-physical properties of bio, non-bio and hybrid nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5875-5904. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Oumer, A. N. and M. M., Hasan and Baheta, Aklilu Tesfamichael and R., Mamat and Abdul Adam, Abdullah (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98. ISSN 1364-0321. (Published)

P

P., Moorthy and A. N., Oumer and M., Ishak (2018) Experimental investigation on effect of fin shape on the thermal-hydraulic performance of compact fin-and- tube heat exchangers. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (1). ISSN 1757-899X (online)

R

Rao, N. Thiwaan and A. N., Oumer and Ummu Kulthum, Jamaludin (2016) State-of-the-art on Flow and Heat Transfer Characteristics of Supercritical CO2 in Various Channels. The Journal of Supercritical Fluids, 116. pp. 132-147. ISSN 0896-8446. (Published)

Rao, N. Thiwaan and Oumer, A. N. and Devandran, G. and M. M., Noor (2018) Investigation on Flow and Heat Transfer of Supercritical CO2 in Helical Coiled Tubes at Various Supercritical Pressures. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (01018). ISSN 2261-236X

Rao, N.T. and Oumer, A. N. and Noor, M. M. and Kadirgama, K. and Basrawi, F. and Siregar, J. P. (2023) Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology. Australian Journal of Mechanical Engineering, 21 (3). pp. 894-910. ISSN 1448-4846. (Submitted) (Submitted)

S

S. N., Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2019) Comparative power extraction analysis of novel nature inspired vertical axis wind turbines. In: UTP-UMP-VIT Symposium on Energy System 2019 , 1-2 October 2019 , UMP Pekan. p. 1.. (Unpublished)

Sahat, Idris Mat and Oumer, Ahmed Nurye and Ahmad, Zulkifli and Rejab, Mohd Ruzaimi Mat (2019) Investigation of fibre reinforcement toward polymer production emphasizing fused deposition modelling. , [Research Report: Research Report] (Unpublished)

Sanderasagran, A. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Idris, Mat Sahat (2022) Alternative method of nature inspired geometrical design strategy for drag induced wind turbine blade morphology. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9759-9772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sanderasagran, Ashwindran Naidu and Azizuddin, Abd Aziz and Oumer, Ahmed Nurye (2021) Novel bio-hybrid drag induced wind turbine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Suhailah, Sujali and Mohd Rusllim, Mohamed and Oumer, A. N. and Azizan, Ahmad and Leung, P. (2018) Study on architecture design of electroactive sites on Vanadium Redox Flow Battery (V-RFB). In: International Conference on Renewable Energy and Environment Engineering (REEE 2018) , 29-31 October 2018 , Paris, France. pp. 1-5..

T

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, J. P. and Zalinawati, Muhamad and Mohammad Hazim, Mohamad Hamdan and Oumer, A. N. and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13 (17). pp. 1-17. ISSN 2073-4360. (Published)

W

W. X., Hong and A. N., Oumer and F., Basrawi and R., Mamat and Abdul Adam, Abdullah (2018) Investigation on heat transfer characteristics and flow performance of methane at supercritical pressures. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 1-2 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. pp. 1-9.. ISSN 1757-8981 (Print), 1757-899X (Online)

Z

Zalinawati, M. and J. P., Siregar and C., Tezara and Jaafar, Jamiluddin and Oumer, A. N. and Norazlianie, Sazali and M. H. M., Hamdan (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659 (print); 2231-8380 (online). (Published)