Nik Syahira, Nik Alias (2014) Effect of the time taken on the performance of fabricated gas–solid fluidized bed column for the separation of rare earth elements. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.
|
Pdf
Effect of the time taken on the performance of fabricated gas–solid fluidized bed column for the separation of rare earth elements.pdf Download (1MB) | Preview |
Abstract
A gas–solid fluidized bed separator used for the separation of rare earth elements (REEs) from printed circuit board was design and fabricated. In this work, the effect of time taken on the performance of the fabricated gas-solid fluidized bed column for the separation of rare earth elements was study. Waste from electronic devices was grinded to powder forms with the particles sized less than 1.0 μm were used in this study. Beds column with different heights of sampling port were analyzed at 10 cm, 20 cm, and 30 cm while the air pressure was 15 psi, 20 psi and 25 psi were tried in this investigation. The rare earth elements were subsequently analyzed by float–sink testing. The results showed the weight percent of the fine powder increases with increasing the time taken for collecting the sample. However, the separation density decreased with increasing the sampling port height of the column
| Item Type: | Undergraduates Project Papers |
|---|---|
| Additional Information: | Faculty of Chemical & Natural Resources Engineering Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2014 |
| Uncontrolled Keywords: | Membrane separation;Fabrication |
| Subjects: | T Technology > TP Chemical technology |
| Faculty/Division: | Faculty of Chemical & Natural Resources Engineering |
| Depositing User: | Muhamad Firdaus Janih@Jaini |
| Date Deposited: | 23 Oct 2015 07:25 |
| Last Modified: | 11 Oct 2023 01:40 |
| URI: | http://umpir.ump.edu.my/id/eprint/8989 |
| Download Statistic: | View Download Statistics |
Actions (login required)
 |
View Item |