Items where Author is "Kadirgama, Kumaran"

Article

Samylingam, Ilan cheliyan and Kadirgama, Kumaran and Samylingam, Lingenthiran and Aslfattahi, Navid and Ramasamy, Devarajan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Kok, Chee Kuang (2024) Review of Ti3C2Tx MXene Nanofluids: Synthesis, Characterization, and Applications. Engineering, Technology & Applied Science Research, 14 (3). pp. 14708-14712. ISSN 1792-8036. (Published)

Samykano, Mahendran and Kumaresan, Rajan and Kananathan, Jeevendran and Kadirgama, Kumaran and Pandey, Adarsh Kumar (2024) An overview of fused filament fabrication technology and the advancement in PLA-biocomposites. International Journal of Advanced Manufacturing Technology, 132 (1-2). pp. 27-62. ISSN 0268-3768. (Published)

Sakinah, Muhamad Hisham and Norazlianie, Sazali and Kadirgama, Kumaran and Ramasamy, Devarajan (2024) A Comprehensive Review on Tribological Behaviourof Hybrid Nanocellulose-CuO as Nanolubricantfor Piston Ring Cylinder Liner Application. Journal of Advanced Research in Micro and Nano Engineering, 18 (1). pp. 60-77. ISSN 2756-8210. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhammad, Mat Noor and Rosli, Abu Bakar and Sivaraos, Subramaniam and Talal, Yusaf and Alsalman, Ali and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2024) Exploring the Potentials of Copper Oxide and CNC Nanocoolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 315-326. ISSN 2462-1943. (Published)

Hongkun, Lu and Muhamad, Mat Noor and Li, Li and Kadirgama, Kumaran (2024) Numerical simulation on the spray angle of the dual-layer hole nozzle in a partition combustion system of the diesel Engine. Journal of Advanced Research in Numerical Heat Transfer, 19 (1). pp. 29-42. ISSN 2735-0142. (Published)

Sakinah, Muhamad Hisham and Norazlianie, Sazali and Kadirgama, Kumaran and Ramasamy, Devarajan (2024) A comprehensive review on tribological behaviour of hybrid Nanocellulose-CuO as nanolubricant for piston ring cylinder liner application. Journal of Advanced Research in Micro and Nano Engineering, 18 (1). pp. 60-77. ISSN 2756-8210. (Published)

Rajamony, Reji Kumar and Paw, Johnny Koh Siaw and Pandey, Adarsh Kumar and Tak, Yaw Chong and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Yusaf, Talal F. and Samykano, Mahendran and Nurhanis Sofiah, Abd Ghafar and Kalidasan, B. and Ahmed, Oday A. and Kadirgama, Kumaran (2024) Energizing the thermophysical properties of phase change material using carbon-based nano additives for sustainable thermal energy storage application in photovoltaic thermal systems. Materials Today Sustainability, 25 (100658). pp. 1-17. ISSN 2589-2347. (Published)

Sakinah, Hisham and Kadirgama, Kumaran and Alotaibi, Jasem Ghanem and Alajmi, Ayedh Eid and Ramasamy, Devarajan and Norazlianie, Sazali and Mohd Kamal, Kamarulzaman and Yusaf, T. and Samylingam, L. and Aslfattahi, Navid and Kok, Chee Kuang (2024) Enhancing stability and tribological applications using hybrid nanocellulose-copper (II) oxide (CNC-CuO) nanolubricant: An approach towards environmental sustainability. Tribology International, 194 (109506). pp. 1-15. ISSN 0301-679X. (Published)

Alhammadi, Ali and Yusaf, Talal F. and Soar, Jeffrey and Ali, Bashar Mahmood and Kadirgama, Kumaran and Yousif, Belal F (2024) Revolutionizing procurement : Unveiling next-gen supplier strategies in UAE’s oil & gas sector. Extractive Industries and Society, 17 (101428). pp. 1-15. ISSN 2214-790X. (Published)

Awad, Omar I. and Zhou, Bo and Kadirgama, Kumaran and Chen, Zhenbin and Mohammed, M. N. (2024) Nonthermal plasma-assisted catalysis NH3 decomposition for COx-free H2 production : A review. International Journal of Hydrogen Energy, 56. pp. 452-470. ISSN 0360-3199. (Published)

Rameshbabu, Ramachandran and Koh, Siaw Paw and Kaviyarasan, Kulandaivelu and Yaw, Chong Tak and Tiong, Sieh Kiong and Benedict, Foo and Yusaf, Talal F. and Valdés, Héctor and Kadirgama, Kumaran and Pasupuleti, Jagadeesh (2024) Construction novel highly active photocatalytic H2 evolution over noble-metal-free trifunctional Cu3P/CdS nanosphere decorated g-C3N4 nanosheet. International Journal of Hydrogen Energy, 55. pp. 592-603. ISSN 0360-3199. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Liew, Kia Wai and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . and Sivaraos, Subramaniam (2024) Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . (2024) Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 19-34. ISSN 2756-8210. (Published)

Farhana, Kaniz and Kadirgama, Kumaran and Faisal Mahamude, Abu Shadate and Jose, Rajan (2024) Review of MXenes as a component in smart textiles and an adsorbent for textile wastewater remediation. Chinese Chemical Letters, 35 (108533). pp. 1-15. ISSN 1001-8417 (print); 1878-5964 (online). (Published)

Yusaf, Talal F. and Faisal Mahamude, Abu Shadate and Kadirgama, Kumaran and Ramasamy, Devarajan and Farhana, Kaniz and A Dhahad, Hayder Abed and Abd Rahim, Abu Talib (2024) Sustainable hydrogen energy in aviation-A narrative review. International Journal of Hydrogen Energy, 52. pp. 1026-1045. ISSN 0360-3199. (Published)

Sivaraos, S. and Lee, K.Y. Sara and Kadirgama, Kumaran and Ramasamy, Devarajan and A. M., Kassim and M. S., Salleh and Vatesh, Umesh Kumar and Pujari, S. and Dharsyanth, R. (2024) Advancements in additive manufacturing: Innovations in direct ink writing materials and their transformative practical applications. Journal of Engineering Science and Technology, 19 (1). pp. 246-275. ISSN 1823-4690. (Published)

Hossain, Md Naeem and Rahman, M. M. and Ramasamy, Devarajan and Kadirgama, Kumaran and Noor, M. M. (2024) Advancements, challenges, and implications for navigating the autonomous vehicle revolution. Journal of Mechanical Engineering and Sciences (JMES), 18 (2). pp. 10077-10093. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Kadirgama, Kumaran and W. N., W. Salleh and Gunawan, Triyanda and Widiastuti, Nurul and Junaidi, Afdhal (2024) Nano cellulose-based adsorbent for Cu(II) adsorption. Engineering, Technology & Applied Science Research, 14 (4). pp. 15338-15343. ISSN 1792-8036. (Published)

Farhana, Kaniz and Mahamude, Abu Shadate Faisal and Kadirgama, Kumaran and Rajan, Jose (2024) Noble MXene nanofluids' impact on solar collector effectiveness enhancement: a CFD numerical evaluation. Sustainable Energy Research, 11 (1). ISSN 2731-9237. (Published)

Afifuddin Arif, Shihabuddin Arip and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2024) Object Detection for Safety Attire Using YOLO(You Only Look Once). Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 37-51. ISSN 2289-7895. (Published)

Qazani, Mohammad Reza Chalak and Aslfattahi, Navid and Kulish, Vladimir Vladimirovich and Asadi, Houshyar and Schmirler, Michal and Zakarya, Muhammad and Alizadehsani, Roohallah and Haleem, Muhammad and Kadirgama, Kumaran (2024) Specific heat capacity extraction of soybean oil/mxene nanofluids using optimized long short-term memory. IEEE Access, 12. pp. 59049-59062. ISSN 2169-3536. (Published)

Jacob, Jeeja and Paul, John and Pandey, A. K. and Selvaraj, Jeyraj and Nasrudin, Abd Rahim and Samykano, Mahendran and Kadirgama, Kumaran (2023) Analyzing long-term reliability and potential of organic eutectic Phase Change Material as thermal batteries. Journal of Energy Storage, 74 (109480). pp. 1-11. ISSN 2352-152X. (Published)

Alhammadi, Ali and Soar, Jeffrey and Yusaf, Talal F. and Ali, Bashar Mahmood and Kadirgama, Kumaran (2023) Redefining procurement paradigms: A critical review of buyer-supplier dynamics in the global petroleum and natural gas industry. Extractive Industries and Society, 16 (101351). pp. 1-11. ISSN 2214-790X. (Published)

Siaw Paw, Johnny Koh and Kiong, Tiong Sieh and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Yaw, Chong Tak and Ahmad Fitri, Yusop and Yusaf, Talal F. and A Dhahad, Hayder Abed and Benedict, Foo (2023) Advancing renewable fuel integration : A comprehensive response surface methodology approach for internal combustion engine performance and emissions optimization. Heliyon, 9 (e22238). pp. 1-25. ISSN 2405-8440. (Published)

Laghari, Imtiaz Ali and Pandey, Adarsh Kumar and Samykano, Mahendran and Aljafari, Belqasem and Kadirgama, Kumaran and Sharma, Kamal Kant and Tyagi, Vineet Veer (2023) Thermal energy harvesting of highly conductive graphene‑enhanced parain phase change material. Journal of Thermal Analysis and Calorimetry, 148 (18). pp. 9391-9402. ISSN 1388-6150. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Muhamad Hisham and Kadirgama, Kumaran and Ramasamy, Devarajan and Samykano, Mahendran and Said, Zafar and Pandey, Adarsh Kumar (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Said, Zafar and Pandey, A. K. (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanofluids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)

Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Wan Sharuzi, Wan Harun and Saidur, Rahman Md (2023) Assessment of thermophysical properties of hybrid nanoparticles [Graphene Nanoplatelets (GNPs) and Cellulose Nanocrystal (CNC)] in a base fluid for heat transfer applications. International Journal of Thermophysics, 44 (55). pp. 1-25. ISSN 0195-928X. (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Subramonian, Sivarao and Kadirgama, Kumaran and Mahdi Al-Obaidi, Abdulkareem Sh. and Mohd Shukor, Mohd Salleh and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan (2023) Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts. Engineering, Technology & Applied Science Research, 13 (5). pp. 11677-11684. ISSN 1792-8036. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)

Alsumaidaee, Yaseen Ahmed Mohammed and Paw, Johnny Koh Siaw and Yaw, Chong Tak and Tiong, Sieh Kiong and Chen, Chai Phing and Yusaf, Talal F. and Benedict, Foo and Kadirgama, Kumaran and Hong, Tanchung and Abd Alla, Ahmed N. (2023) Fault detection for medium voltage switchgear using a deep learning hybrid 1D-CNN-LSTM model. IEEE Access, 11. pp. 97574-97589. ISSN 2169-3536. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Saidur, R. and Yusaf, Talal (2023) Improving the thermophysical properties of hybrid nanocellulose-copper (II) oxide (CNC-CuO) as a lubricant additives: A novel nanolubricant for tribology application. Fuel, 332 (126229). pp. 1-15. ISSN 0016-2361. (Published)

Kumaresan, R. and Kananathan, J. and Samykano, M. and Kadirgama, Kumaran and Badadhe, Avinash M. (2023) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. Journal of Engineering and Technology (JET), 14 (1). pp. 91-99. ISSN 2180-3811. (Published)

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Laghari, Imtiaz Ali and Pandey, A. K. and Samykano, Mahendran and Aljafari, Belqasem and Kadirgama, Kumaran and Sharma, Kamal and Tyagi, V. V. (2023) Thermal energy harvesting of highly conductive graphene-enhanced paraffin phase change material. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 9391-9402. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Taha, Zahraa Khduair and Yaw, Chong Tak and Koh, Siaw Paw and Tiong, Sieh Kiong and Kadirgama, Kumaran and Benedict, Foo and Tan, Jian Ding and Balasubramaniam, Yogendra A.L. (2023) A survey of federated learning from data perspective in the healthcare domain : Challenges, methods, and future directions. IEEE Access, 11. pp. 45711-45735. ISSN 2169-3536. (Published)

Yusaf, Talal F. and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Ramasamy, Devarajan and Kadirgama, Kumaran and Samykano, Mahendran and Subramaniam, Sivaraos (2022) Physical-chemical properties modification of hermetia illucens larvae oil and diesel fuel for the internal combustion engines application. Energies, 15 (8073). pp. 1-17. ISSN 1996-1073. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Shahabuddin, Syed and Pandey, Adarsh Kumar and Kadirgama, Kumaran and Said, Zafar and Sudhakar, Kumarasamy (2022) Copper (II) oxide nanoparticles as additives in RBD palm olein : Experimental analysis and mathematical modelling. Journal of Molecular Liquids, 363 (119892). ISSN 0167-7322. (Published)

Yusaf, Talal and Mahamude, Abu Shadate Faisal and Farhana, Kaniz and Wan Sharuzi, Wan Harun and Kadirgama, Kumaran and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Subramonian, Sivarao and Hall, Steve and Dhahad, Hayder Abed (2022) A comprehensive review on graphene nanoparticles : Preparation, properties, and applications. Sustainability (Switzerland), 14 (12336). pp. 1-32. ISSN 2071-1050. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Saidur, Rahman Md and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol®55 nanofluids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and Zetty Akhtar, Abd Malek and Wahaizad, Safiei (2022) A comprehensive review on thermal conductivity and viscosity of nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 15-40. ISSN 2289-7879. (Published)

Talal, Yusaf and Mohamd, Laimon and Waleed, Alrefae and Kadirgama, Kumaran and Hayder A., Dhahad and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Belal, Yousif (2022) Hydrogen energy demand growth prediction and assessment (2021–2050) using a system thinking and system dynamics approach. Applied Sciences (Switzerland), 12 (2). pp. 1-16. ISSN 2076-3417. (Published)

Talal, Yusaf and Louis, Fernandes and Abd Rahim, Abu Talib and Yazan S. M., Altarazi and Waleed, Alrefae and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Rizalman, Mamat and Hayder, Al Dhahad and Benedict, F. and Mohamd, Laimon (2022) Sustainable aviation—hydrogen is the future. Sustainability (Switzerland), 14 (1). pp. 1-17. ISSN 2071-1050. (Published)

Norhaida, Ab Razak and Md Mustafizur, Rahman and Kadirgama, Kumaran (2014) Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (1). pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Norhaida, Ab Razak and Rahman, Md Mustafizur and Kadirgama, Kumaran (2013) Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Conference or Workshop Item

Rajamony, Reji Kumar and Samykano, Mahendran and Kousik Suraparaju, Subbarama and Abd Ghafar, Sofiah Nurhanis and Narayana Namasivayam, Satesh Narayana and Rajkumar, K. and Kadirgama, Kumaran and Devarajan, Ramasamy (2024) Energizing the thermal conductivity and optical performance of salt hydrate phase change material using copper (II) oxide nano additives for sustainable thermal energy storage. In: 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-10., 488 (01009). ISSN 2555-0403 (Published)

Yadav, Aman and Samykano, Mahendran and Pandey, A.K. and Kalidasan, B. and Kumar, R. Reji and Kadirgama, Kumaran and Sofiah, A.G.N. and Ngui, Wai Keng (2024) Thermal energy storage behaviour of form-stable polyethylene glycol/MWCNT- based phase change materials. In: 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30-31 October 2023 , Bandar Sunway. pp. 1-18., 488 (01008). ISSN 2555-0403 (Published)

Kadirgama, Ganesaan and Muhammad Adam lee, Abdullah and Devarajan, Ramasamy and Kadirgama, Kumaran and Samykano, Mahendran and Yusaf, Talal F. (2024) Thermal properties of engine oils through the integration of graphene nanoparticles : A greener approach for sustainable mechanical systems. In: 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-6., 488 (02011). ISSN 2555-0403 (Published)

Kousik Suraparaju, Subbarama and Samykano, Mahendran and Narayana Namasivayam, Satesh Narayana and Kadirgama, Kumaran and Ramasamy, Devarajan (2024) Thermal stability and performance evaluation of hitec molten salt for high-temperature energy storage applications. In: 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-17., 488 (02006). ISSN 2555-0403 (Published)

Rajan, Dinesh Hasan and Samykano, Mahendran and Suraparaju, Subbarama Kousik and Moorthy, Kohbalan and Kadirgama, Kumaran and Devarajan, Ramasamy and Pandey, Adarsh Kumar (2024) Materials behaviour analysis of 3D printed brass-PLA filament. In: 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12-13 September 2023 , Kuantan. pp. 1-18., 2688 (012003). ISSN 1742-6588 (Published)

Kadirgama, G. and Lee, Muhammad A.M.A. and D., Ramasamy and Kadirgama, Kumaran and Samykano, M. and Yusaf, T. (2024) Thermal Properties of Engine Oils through the Integration of Graphene Nanoparticles: A Greener Approach for Sustainable Mechanical Systems. In: E3S Web of Conf. 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-6., 488 (02011). ISSN 2267-1242 (Published)

G., Kadirgama and Mohd Kamal, Kamarulzaman and D., Ramasamy and Kadirgama, Kumaran and Sakinah, Hisham (2023) Classification of lubricants base oils for nanolubricants applications—A review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 205-213.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Jacob, Jeeja and Paul Nadakkal, John and Selvaraj, Jeyraj and Kadirgama, Kumaran (2023) Economic analysis of phase change material integrated photovoltaic thermal systems : A short communication. In: IOP Conference Series : Earth and Environmental Science. International Postgraduate Conference for Energy Research 2022, IPCER 2022 , 18 - 19 December 2022 , Hybrid, Kuala Lumpur. pp. 1-7., 1261 (012010). ISSN 1755-1307 (Published)

Tarek, Abedin and Koh, Siaw Paw and Yaw, Chong Tak and Phing, Chen Chai and Tiong, Sieh Kiong and Tan, Jian Ding and Kharudin, Ali and Kadirgama, Kumaran and Benedict, Foo (2023) Vibration signal for bearing fault detection using random forest. In: Journal of Physics: Conference Series; International Conference on Emerging Electronic and Automation Technology 2022, ICEEAT 2022 , 10-11 December 2022 , Virtual, Online. pp. 1-21., 2467 (012017). ISSN 1742-6588 (Published)

Ng, X. H. and R. A., Bakar and Kadirgama, Kumaran and Sivaraos, . and D., Ramasamy and Mahendran, Samykano (2023) The performance of beta type stirling engine using different fuel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 89-110.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Rajan, Kumaresan and Jeevendran, Kananathan and Samykano, Mahendran and Kadirgama, Kumaran and Avinash, M. Badadhe (2022) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 42.. (Published)

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66.. (Published)

Lu, Hongkun and Muhamad, Mat Noor and Kadirgama, Kumaran (2022) Numerical simulation of influence of eccentric needle movement on internal flow characteristics of groove-type voc nozzle. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 447-457., 2022 (22). ISSN 27324494 ISBN 978-183953782-0 (Published)

Zetty Akhtar, Abdul Malek and Md Mustafizur, Rahman and Kadirgama, Kumaran and Saidur, Rahman and Wahaizad, Safiei (2021) Effects of temperature and concentration on thermophysical properties of TiO2-MWCNTs -doped graphene nanofluids. In: 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 920-925., 48 (4). ISSN 2214-7853 (Published)

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Farid, Zainudin and Rosli, Abu Bakar and Kadirgama, Kumaran and Gan, Leong Ming (2020) Kinematic and thermodynamic operational analysis of rhombic-drive Stirling engine prototype. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012070). ISSN 1757-8981 (Published)

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Md Abdul, Maleque (2020) An overview on synthesis, stability, opportunities and challenges of nanofluids. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 30-37., 41 (168124). ISSN 2214-7853 (Published)

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)

Muhamad, Mat Noor and Kadirgama, Kumaran and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Md Mustafizur, Rahman and Ahmad Syahrizan, Sulaiman (2008) Quality management system in implementation of outcome based education at faculty of mechanical engineering, universiti malaysia pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished) (Unpublished)

Research Book Profile

Rahman, M. M. and Kadirgama, Kumaran and Bachtiar, Dandi and Siregar, J. P. and Sulaiman, A. S. (2014) Modelling of lightweight sandwich structures based on corrugated-cores. , [Research Book Profile: Research Report] (Unpublished)

Research Report

Samykano, M. and Rahman, M. M. and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Reza, M. S. and Harun, W. S W and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system. , [Research Report] (Unpublished)

Viswanatha Sharma, Korada and Azmi, W. H. and Bakar, R. A. and Noor, M. M. and Kadirgama, Kumaran and Reddy Prasad, D. M. (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. , [Research Report] (Unpublished)

Samykano, M. and Nagarajan, T. and Majdi, . and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM. , [Research Report] (Unpublished)

Ramasamy, D. and Samykano, M. and Kadirgama, Kumaran and Lee, Giok Chui and Noor, M. M. and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method. , [Research Report] (Unpublished)

Kadirgama, Kumaran Hybrid nanoparticles with ethylene glycol for car radiator application. , [Research Report] (Unpublished)

Kadirgama, Kumaran Thermal management of vehicle radiator by nanofluid. , [Research Report] (Unpublished)