Items where Author is "Samykano, Mahendran"

Article

Rajamony, Reji Kumar and Paw, Johnny Koh Siaw and Pandey, Adarsh Kumar and Tak, Yaw Chong and Pasupuleti, Jagadeesh and Tiong, Sieh Kiong and Yusaf, Talal F. and Samykano, Mahendran and Nurhanis Sofiah, Abd Ghafar and Kalidasan, B. and Ahmed, Oday A. and Kadirgama, Kumaran (2024) Energizing the thermophysical properties of phase change material using carbon-based nano additives for sustainable thermal energy storage application in photovoltaic thermal systems. Materials Today Sustainability, 25 (100658). pp. 1-17. ISSN 2589-2347. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Liew, Kia Wai and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . and Sivaraos, Subramaniam (2024) Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . (2024) Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 19-34. ISSN 2756-8210. (Published)

Hazim, Khir and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Samykano, Mahendran and Nasrudin, Abd Rahim (2024) Bismuth as efficient sintering aid for TiO2-based low temperature dye sensitized solar cell. Materials Science in Semiconductor Processing, 169 (107918). pp. 1-9. ISSN 1369-8001. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Rajamony, Reji Kumar and Pandey, Adarsh Kumar and Nur Fatin, Sulaiman and Zatil Amali, Che Ramli and Tiong, Sieh Kiong and Koh, Siaw Paw (2024) Potential coolants for fuel cell application: Multi-objective optimization of thermophysical properties and PPF calculation of hybrid palm oil nanofluids. Case Studies in Thermal Engineering, 53 (103931). pp. 1-17. ISSN 2214-157X. (Published)

Parvez, Md. Shohan and Rahman, Md Mustafizur and Samykano, Mahendran and Mohammad, Yeakub Ali (2024) Surface Morphology and Thermo-Electrical Energy Analysis of Polyaniline (PANI) Incorporated Cotton Fabric. Energy Engineering, 121 (1). pp. 1-12. ISSN 0199-8595. (Published)

Yadav, Aman and Samykano, Mahendran and Pandey, A. K. and Aljafari, Belqasem and Tyagi, V. V. (2023) Synthesis and characterization of polyethylene glycol-polymethyl methacrylate infused multiwalled carbon nanotube nanocomposite as an efficient thermal energy storage. Materials Today Communications, 37 (107472). ISSN 2352-4928. (Published)

Samykano, Mahendran (2023) Hybrid photovoltaic thermal systems : Present and future feasibilities for industrial and building applications. Buildings, 13 (1950). pp. 1-32. ISSN 2075-5309. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Kumar R, Reji and A.K., Pandey and Samykano, Mahendran and Nath Mishra, Yogeshwar and R.V. Mohan, R.V. and Sharma, Kamal and Tyagi, V.V. (2022) Effect of surfactant on functionalized multi-walled carbon nano tubes enhanced salt hydrate phase change material. Journal of Energy Storage, 55 (105654). pp. 1-15. ISSN 2352-152X. (Published)

Yusaf, Talal F. and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Ramasamy, Devarajan and Kadirgama, Kumaran and Samykano, Mahendran and Subramaniam, Sivaraos (2022) Physical-chemical properties modification of hermetia illucens larvae oil and diesel fuel for the internal combustion engines application. Energies, 15 (8073). pp. 1-17. ISSN 1996-1073. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Shahabuddin, Syed and Pandey, Adarsh Kumar and Kadirgama, Kumaran and Said, Zafar and Sudhakar, Kumarasamy (2022) Copper (II) oxide nanoparticles as additives in RBD palm olein : Experimental analysis and mathematical modelling. Journal of Molecular Liquids, 363 (119892). ISSN 0167-7322. (Published)

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Yadav, Aman and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Graphene–silver hybrid nanoparticle based organic phase change materials for enhanced thermal energy storage. Sustainability (Switzerland), 14 (13240). pp. 1-16. ISSN 2071-1050. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad, Shakeel Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2022) Recent advancements and challenges in flexible low temperature dye sensitised solar cells. Sustainable Energy Technologies and Assessments, 53 (102745). pp. 1-23. ISSN 2213-1388. (Published)

Pandey, Ashutosh K. and Kalidasan, B. and Reji Kumar, Rajamony and Rahman, Saidur and Tyagi, Vineet Veer and Krismadinata, Krismadinata and Said, Zafar and Salam, P. Abdul and Juanico, Dranreb Earl and Ahamed, Jamal Uddin and Sharma, Kamal and Samykano, Mahendran and Tyagi, S.K. (2022) Solar energy utilization techniques, policies, potentials, progresses, challenges and recommendations in asean countries. Sustainability (Switzerland), 14 (11193). pp. 1-26. ISSN 2071-1050. (Published)

Samykano, Mahendran (2022) Role of phase change materials in thermal energy storage : Potential, recent progress and technical challenges. Sustainable Energy Technologies and Assessments, 52 (102234). pp. 1-29. ISSN 2213-1388. (Published)

Jacob, Jeeja and Pandey, Adarsh Kumar and Nasrudin, Abd Rahim and Selvaraj, Jeyraj A.L. and Samykano, Mahendran and Saidur, Rahman Md and Tyagi, Vineet Veer (2022) Concentrated Photovoltaic Thermal (CPVT) systems : Recent advancements in clean energy applications, thermal management and storage. Journal of Energy Storage, 45 (103369). pp. 1-25. ISSN 2352-152X. (Published)

Ali Laghari, Imtiaz and Samykano, Mahendran and Pandey, A.K and Said, Zafar and Kadirgma, K. and Tyagi, V.V. (2022) Thermal conductivity and Thermal properties enhancement of Paraffin/Titanium Oxide based Nano enhanced Phase change materials for Energy storage. Advances in Science and Engineering Technology International Conferences (ASET). pp. 1-5. ISSN 978-1-6654-1801. (Published)

Sofiah, A. G. N. and Samykano, Mahendran and Pandey, A. K. and Kadirgama, K. (2021) Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments, 48 (101635). pp. 1-32. ISSN 2213-1388. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, A. K. (2021) A comparative experimental study on the physical behavior of mono and hybrid RBD palm olein based nanofluids using CuO nanoparticles and PANI nanofibers. International Communications in Heat and Mass Transfer, 120 (105006). pp. 1-13. ISSN 0735-1933. (Published)

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Samykano, Mahendran and K., Kadirgama and Hussein, A. M. and Ngui, Wai Keng (2020) Template Synthesis of Ni Nanowires: Characterization and Modelling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 76-90. ISSN 2289-7879. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, Adarsh (2020) An experimental study on characterization and properties of eco-friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1588-2926. (Published)

Samykano, Mahendran and Selvamani, Sathish Kumar and K., Kadirgama and W. K., Ngui and Kanagaraj, G. and K., Sudhakar (2019) Mechanical property of FDM printed ABS : influence of printing parameters. International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 2779-2796. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Nur Syawanie, Manam and W. S., Wan Harun and Mohd Halim Irwan, Ibrahim and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 37-52. ISSN 1368-2148. (Published)

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and K., Kadirgama and Mohamad Shahrizan, Moslan and Faten Ermala, Che Othman and Nor Hafiza, Ismail and Samykano, Mahendran and Zawati, Harun (2018) Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 378-381. ISSN 2289-5981 (Print); 2289-599x (Online). (Published)

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

Nurul Akmal, Che Lah and Mohd Rafie, Johan and Samykano, Mahendran and Mohd Mawardi, Saari (2017) Truncated and Spheroidal Ag Nanoparticles: A Matter of Size Transformation. Colloid and Polymer Science. pp. 1-11. ISSN 0303-402X (Print); 1435-1536 (Online). (Published)

Nurul Akmal, Che Lah and Samykano, Mahendran and Trigueros, Sonia (2016) Nanoscale Metal Particles as Nanocarriers in Targeted Drug Delivery System. Journal of Nanomedicine Research, 4 (2). pp. 1-6. ISSN 2377-4282. (Published)

Samykano, Mahendran and Fazli, Ismail and Chander, Sawalingam Thinesh (2011) Development of micro EDM with directly mounted APA 400MML actuator. Advanced Materials Research, 314-316. pp. 1811-1817. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Kananathan, Jeeven and Samykano, Mahendran and Kadirgama, K. and Devarajan, Ramasamy and Rahman, Md Mustafizur Comprehensive investigation and prediction model for mechanical properties of coconut wood–polylactic acid composites filaments for FDM 3D printing. European Journal of Wood and Wood Products, 80. pp. 75-100. ISSN 0018-3768(print); 1436-736X(online). (Published)

Conference or Workshop Item

Rajan, Kumaresan and Jeevendran, Kananathan and Samykano, Mahendran and Kadirgama, Kumaran and Avinash, M. Badadhe (2022) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 42..

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66..

Kalidasan, B. and Pandey, Adarsh Kumar and Saidur, Rahman Md and Samykano, Mahendran and Tyagi, Vineet Veer (2022) Optical absorptivity and thermal conductivity analysis of silver nanoparticle dispersed salt hydrate PCM. In: 2022 IEEE International Conference on Power and Energy : Advancement in Power and Energy Systems towards Sustainable and Resilient Energy Supply, PECon 2022Pages 203 - 2082022; 9th IEEE International Conference on Power and Energy, PECon 2022 , 5 - 6 December 2022 , Langkawi, Kedah. pp. 328-332. (185592). ISBN 978-166540990-2

Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) 3D Printing: Overview of PLA Progress. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25 - 26 Julai 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10.. (Unpublished)

Tai, K. Siang and Anusuiah, Vasu and Hagos, F. Y. and M. M., Noor and R., Mamat and K., Kadirgama and Azmi, W. H. and Samykano, Mahendran and Sharma, Ravi Kumar (2018) Effect of loading temperature on thermophysical properties of paraffin wax as PCM for thermal energy storage. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 55..

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and Kanagaraj, G. (2018) 3D Printing: Overview of ABS Evolvement. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10.. (Submitted)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Jayaseelan, V. (2018) BIPV market growth: SWOT Analysis and favorable factors. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 412-415.. ISBN 978-1-5386-3695-4

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Hyder, Farhan (2018) BIPV power plants and policy recommendatons. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 652-655.. ISBN 978-1-5386-3695-4

Samykano, Mahendran and Santhip, - and W. K., Ngui and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2018) Magnetic nanowires (Ni) via chemical reduction method. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Kananathan, Jeeven and Samykano, Mahendran and Sudhakar, K. and Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and Manoj Kumar, Nallapaneni and W. K., Ngui and K., Kadirgama and Azmi, W. H. and W. S., Wan Harun (2018) Nanofluid as coolant for grinding process: An overview. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-16., 342 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) Preliminary investigations of Acrylonitrile Butadiene Styrene (ABS) properties. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Nurhanis Sofiah, Abd Ghafar and Kananathan, J. and Samykano, Mahendran and Ulakanathan, S. and S. A., Che Ghani and W. S., Wan Harun and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Electrochemical Deposited Nickel Nanowires: Influence of Deposition Bath Temperature on the Morphology and Physical Properties. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012032). ISSN 1757-899X

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Wan Sharuzi, Wan Harun and Kananathan, J. and Samykano, Mahendran and Nurul Akmal, Che Lah and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and SpaKuantan, Pahang; Malaysia. pp. 1-7., 257 (1). ISSN 17578981

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Samykano, Mahendran (2010) Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design By Simulation And Experimental Techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .