Items where Division is "Centre of Excellence: Automotive Engineering Centre
Centre of Excellence: Automotive Engineering Centre" and Year is 2017

Article

A. A. M., Redhwan and W. H., Azmi and M. Z., Sharif and R., Mamat and Nurul Nadia, Mohd Zawawi (2017) Comparative Study of Thermo-physical Properties of SiO2 and Al2O3 Nanoparticles Dispersed in PAG Lubricant. Applied Thermal Engineering, 116. pp. 823-832. ISSN 1359-4311. (Published)

Abd Rahman, Zulhishamuddin and Mohamed Suffian, Reza and S. N., Aqida and Mohd Rashidi, Maarof (2017) Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE). Materials Research Ibero-american Journal of Materials. pp. 1-7. ISSN ISSN 1516-1439 / ISSN 1980-5373. (Published)

Abd Rashid, Abd Aziz and Anbese, Yohannes Tamirat and Hagos, F. Y. and Heikal, Morgan R. and Firmansyah, F. (2017) Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve. Energies, 10 (7). pp. 1-16. ISSN 1996-1073 . (Published)

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Herzwan, Hamzah and Mohd Fahmi, Othman and Mrwan, Anes Abdulla G. (2017) Analysis of Combustion Characteristics, Engine Performance and Exhaust Emissions of Diesel Engine Fueled with Upgraded Waste Source Fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199. (Published)

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Awad, Omar I. and Ali, Obed Majeed and R., Mamat and Abdul Adam, Abdullah and G., Najafi and M. K., Kamarulzaman and I. M., Yusri and M. M., Noor (2017) Using Fusel Oil as a Blend in Gasoline to Improve SI Engine Efficiencies: A Comprehensive Review. Renewable and Sustainable Energy Reviews, 69. pp. 1232-1242. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and Ali, Obed M. and Azmi, W. H. and K., Kadirgama and I. M., Yusri and A. M., Leman and Yusaf, T. (2017) Response Surface Methodology (RSM) Based Multi-Objective Optimization of Fusel Oil-Gasoline Blends at Different Water Content in SI Engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Obed M., Ali and K., Kadirgama and A. M., Leman (2017) Performance and Combustion Characteristics of an SI Engine Fueled With Fusel Oil-Gasoline at Different Water Content. Applied Thermal Engineering, 123. pp. 1374-1385. ISSN 1359-4311. (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and F., Yusop and I. M., Yusri (2017) The Impacts of Moisture Content on Performance and Emissions of a Four-Cylinder SI Engine Running with Fusel Oil-Gasoline Blends. WSEAS Transactions on Environment and Development, 13. pp. 120-128. ISSN 1790-5079 (print); 2224-3496 (online). (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri (2017) Performance, Combustion Characteristics and Emission Tests of Single Cylinder Engine Running on Fusel Oil - Diesel Blended (F20) Fuel. International Journal of Vehicle Structures & Systems, 9 (3). pp. 195-198. ISSN 0975-3060 (Print); 0975-3540 (Online). (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and M. M., Noor (2017) The Effect of Adding Fusel Oil to Diesel On the Performance and the Emissions Characteristics in a Single Cylinder CI Engine. Journal of the Energy Institute, 90 (3). pp. 382-396. ISSN 1743-9671. (Published)

Awad, Omar I. and R., Mamat and Thamir K., Ibrahim and Hagos, F. Y. and M. M., Noor and I. M., Yusri and A. M., Leman (2017) Calorific Value Enhancement of Fusel Oil by Moisture Removal and Its Effect on the Performance and Combustion of a Spark Ignition Engine. Energy Conversion and Management, 137. pp. 86-96. ISSN 0196-8904. (Published)

Azmi, W. H. and H. W., Chiam and N. M., Adam and M. K. A. M., Ariffin (2017) Numerical Study Of Nanofluid Heat Transfer For Different Tube Geometries – A Comprehensive Review On Performance. International Communications in Heat and Mass Transfer, 86. pp. 60-70. ISSN 0735-1933. (Published)

Azmi, W. H. and M. Z., Sharif and Yusof, T. M. and R., Mamat and A. A. M., Redhwan (2017) Potential of Nanorefrigerant and Nanolubricant on Energy Saving in Refrigeration System – A Review. Renewable and Sustainable Energy Reviews, 69. pp. 415-428. ISSN 1364-0321. (Published)

Azmi, W. H. and N. A., Usri and R., Mamat and K. V., Sharma and M. M., Noor (2017) Force Convection Heat Transfer of Al2O3 Nanofluids for Different Based Ratio of Water: Ethylene Glycol Mixture. Applied Thermal Engineering, 112. pp. 707-719. ISSN 1359-4311. (Published)

Chala, G. T. and A. R. A., Aziz and Hagos, F. Y. (2017) Combined Effect of Boost Pressure and Injection Timing on the Performance and Combustion of CNG in a DI Spark Ignition Engine. International Journal of Automotive Technology, 18 (1). pp. 85-96. ISSN 1229-9138. (Published)

Chiam, H. W. and Azmi, W. H. and Usri, N. A. and R., Mamat and N. M., Adam (2017) Thermal Conductivity and Viscosity Of Al2o3 Nanofluids for Different Based Ratio of Water and Ethylene Glycol Mixture. Experimental Thermal and Fluid Science, 81. pp. 420-429. ISSN 0894-1777. (Published)

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370. pp. 19-28. ISSN 1662-9507. (Published)

Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X. (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and Firmansyah, F. and R., Mamat (2017) Effect of Fuel Injection Timing of Hydrogen Rich Syngas Augmented With Methane in Direct-Injection Spark-Ignition Engine. International Journal of Hydrogen Energy, 42 (37). pp. 23846-23855. ISSN 0360-3199. (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and M. F., Othman and S. M., Rosdi (2017) Influences of Gasoline Fuels on Waste Heat Recovery Potentiality of a Spark Ignition Engine. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846(print); 0974-5645(online). (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Mohd Hafizil, Mat Yasin and Ahmad Fitri, Yusop (2017) Investigation of Influences of Secondary butyl-alcohol Blends on Performance and Cycle-To-Cycle Variations in a Spark Ignition Engines. Energy Procedia, 110. pp. 310-315. ISSN 1876-6102 . (Published)

I. M., Yusri and R., Mamat and Azmi, W. H. and Awad, Omar I. and Obed M., Ali and A. I. M., Shaiful (2017) Application of Response Surface Methodology in Optimization of Performance and Exhaust Emissions of Secondary butyl alcohol-gasoline Blends in SI Engine. Energy Conversion and Management, 133. pp. 178-195. ISSN 0196-8904. (Published)

K., Kadirgama and D., Ramasamy and Kong, Chung Hwa (2017) Assessment of Alternative Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3591-3605. ISSN 1678-5878 (Print); 1806-3691 (Online). (Published)

K., Ramachandran and K., Kadirgama and D., Ramasamy and Azmi, W. H. and F. , Tarlochan (2017) Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental – Statistical approach by using Response Surface Methodology. Applied Thermal Engineering, 122. pp. 473-483. ISSN 1359-4311. (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman (2017) Surface Characteristics of Ti-5Al-2.5Sn in Electrical Discharge Machining Using Negative Polarity of Electrode. The International Journal of Advanced Manufacturing Technology, 92 (1-4). pp. 1-13. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F., Nabil and W. H., Azmi and K. A., Hamid and N. N. M., Zawawi and Priyandoko, Gigih and R., Mamat (2017) Thermo-physical Properties of Hybrid Nanofluids and Hybrid Nanolubricants: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 83. pp. 30-39. ISSN 0735-1933. (Published)

M. M., Hasan and M. M., Rahman and M. Nomani, Kabir and Abdul Adam, Abdullah (2017) Numerical Study on the Combustion and Performance Characteristics of a HCCI Engine Resulting from the Autoignition of Gasoline Surrogate Fuel. Journal of Energy Engineering , 143 (5). pp. 1-10. ISSN 0733-9402. (Published)

M. M., Noor and K., Kadirgama and A. M., Hussein (2017) Nanoparticles Suspended in Ethylene Glycol Thermal Properties and Applications: An Overview. Renewable and Sustainable Energy Reviews, 69. pp. 1324-1330. ISSN 1364-0321. (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and N. N. M., Zawawi and R., Mamat (2017) Improvement of nanofluid stability using 4-step UV-vis spectral absorbency analysis. Journal of Mechanical Engineering, S1 4 (2). pp. 233-247. ISSN 1823-5514 (print); 2550-164X (online). (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and T. M., Yusof (2017) Performance analysis of SiO2/PAG nanolubricant in automotive air conditioning system. International Journal of Refrigeration, 75. pp. 204-216. ISSN 0140-7007. (Published)

M.Kh, Abdolbaqi and Rizalman, Mamat and Nor Azwadi, Che Sidik and Azmi, W. H. and P., Selvakumar (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of BioGlycol/water based TiO2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108. pp. 1026-1035. ISSN 0017-9310. (Published)

Mohd Fahmi, Othman and Abdul Adam, Abdullah and G., Najafi and R., Mamat (2017) Green Fuel as Alternative Fuel for Diesel Engine: A Review. Renewable and Sustainable Energy Reviews, 80. pp. 694-709. ISSN 1364-0321. (Published)

N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

N. S. M., Noor and Z., Ghazalli and M. R. M., Rejab and F. A., Fauzi and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2017) A Comparison of Muscular Activity among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method. Advanced Science Letters, 23 (11). pp. 11471-11474. ISSN 1936-6612. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2017) Bits Reduction in the Electrodeposition Process of a Pickup Truck – A case study. Jordan Journal of Mechanical and Industrial Engineering, 11 (1). pp. 27-33. ISSN 1995-6665. (Published)

Norhafzan, Bariman and S. N., Aqida and Fazliana, Fauzun (2017) Laser Melting of High Thermal Conductivity Steel (HTCS) Surface. Materials Science Forum, 890. pp. 380-383. ISSN 1662-9752. (Published)

Ramachandran, Kaaliarasan and K., Kadirgama and D., Ramasamy and Hussein, A.M. and Azmi, W. H. and Tarlochan, F. and Kadirgama, G. (2017) Thermophysical Properties Measurement of Nano Cellulose in Ethylene Glycol/Water. Applied Thermal Engineering, 123. pp. 1158-1165. (Published)

Siti Norazila, Zahari and M. S. M., Sani (2017) Investigation on impact hammer testing with different types of hammer tip for welded thin plate. Advanced Science Letters, 23 (11). pp. 11325-11329. ISSN 1936-6612. (Published)

Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Chan, Shiau Wei and Bukhari, Manshoor and M. S. M., Sani and Amir, Khalid (2017) Study of a simply-supported beam with attached multiple vibration absorbers by using finite element analysis. Advanced Science Letters, 23 (5). pp. 3951-3954. ISSN 1936-6612. (Published)

Conference or Workshop Item

I. M., Yusri and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2017) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Injection Spark Ignition Engine. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01036). ISSN 2261-236X

Izzuddin, Zaman and Shiau, Wei Chan and M. S. M., Sani (2017) Design analysis of mechanical jack for assembling canopy. In: International Conference on Machine Learning and Soft Computing, ICMLSC 2017 , 13-16 January 2017 , Ho Chi Minh City; Viet Nam. pp. 209-213.. ISBN 978-145034828-7

Izzuddin, Zaman and Syaiful Azmirul, Mohd Rozlan and Nor Azali, Azmir and Maznan, Ismon and M. A., Madlan and Musli Nizam, Yahya and Muhd Hafeez, Zainulabidin and M. S. M., Sani and M. F. M., Noh (2017) Modelling of rigid walled enclosure couple to a flexible wall using matlab and ansys APDL. In: Journal of Physics: Conference Series; 1st International Conference on Materials Physics and Mechanics 2017, MPM 2017 , 23 July 2017 , Langkawi. pp. 1-7., 914 (1). ISSN 1742-6588 (print); 1742-6596 (online)

K. A., Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2017) Improved Thermal Conductivity of Tio2-Sio2 Hybrid Nanofluid in Ethylene Glycol and Water Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012067). ISSN 1757-8981 (Print); 1757-899X (Online)

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X

Lee, K.H. and N. A. M, Mukhtar and Hagos, F. Y. and M. M., Noor (2017) A study of the stabilities, microstructures and fuel characteristics of tri-fuel (diesel-biodiesel-ethanol) using various fuel preparation methods. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-15., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Low, M. H. and M. N.A., Mukhtar and Hagos, F. Y. and M. M., Noor (2017) Tri-fuel (diesel-biodiesel-ethanol) emulsion characterization, stability and the corrosion effect. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-11., 257 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat Transfer and Friction Factor of Composite TiO2–SiO2nanofluids in Water-Ethylene Glycol (60:40) Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012066). ISSN 1757-8981 (Print); 1757-899X (Online)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat transfer and friction factor of composite TiO2-SiO2 nanofluids in water-ethylene glycol (60:40) mixture. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 August 2017 , Swiss Garden Hotel and Spa Kuantan, Pahang; Malaysia. pp. 1-8., 257 (1). ISSN 1757-8981(print); 1757-899X(online)

M. H. N., Izham and N. A. Z., Abdullah and Siti Norazila, Zahari and M. S. M., Sani (2017) Structural Dynamic Investigation of Frame Structure with Bolted Joints. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01043). ISSN 2261-236X

M. S. M., Sani and N. A., Nazri and D.A.J., Alawi (2017) Vibration analysis of resistance spot welding joint for dissimilar plate structure (mild steel 1010 and stainless steel 304). In: Joining And Welding Symposium (Jws) 2017 , 11 Julai 2017 , UMP Pekan. pp. 1-9., 238 (1). ISSN 17578981

M. S. M., Sani and N. A., Nazri and M. N., Abdul Rani and M. A., Yunus (2017) Dynamic analysis of I cross beam section dissimilar plate joined by TIG welding. In: International Conference On Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. pp. 1-7.. (Unpublished)

M. Z., Sharif and Azmi, W. H. and Redhwan, A. A. M. and Zawawi, N. M. M. (2017) Preparation and Stability of Silicone Dioxide Dispersed in Polyalkylene Glycol based Nanolubricants. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01049). ISSN 2261-236X

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Razali, Hanipah and A. R., Razali (2017) The numerical assessment of motion strategies for integrated linear motor during starting of a free-piston engine generator. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012054). ISSN 1757-8981

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah (2017) The Two-Stroke Poppet Valve Engine. Part 2: Numerical Investigations Of Intake And Exhaust Flow Behaviour. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. 012024., 257 (012024). ISSN 1757-8981

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981

N. A., Nazri and M. S. M., Sani (2017) Finite Element Normal Mode Analysis of Resistance Welding Jointed of Dissimilar Plate Hat Structure. In: 4th International Conference On Mechanical Engineering Research (ICMER) 2017 , 1-2 August 2017 , Hotel Swiss Graden, Kuantan. pp. 1-9., 257 (1). ISSN 17578981

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2017) Correlation of Numerical and Experimental Analysis for Dynamic Behaviour of a body-in-white (BIW) Structure. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01020). ISSN 2261-236X

N. F. D., Razak and M. S. M., Sani and Azmi, W. H. and Zhang, B. (2017) Noise and vibration analysis for automotive radiator cooling fan. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 Aug. 2017 , Swiss Garden Hotel and Spa, Kuantan, Pahang. pp. 1-9., 257 (1). ISSN 17578981

Norizam, Sulaiman and Kamarul Hawari, Ghazali and M. S., Jadin and Amran, Abdul Hadi and M. S., Najib and Mohd Salmizan, Mohd Zain and Fatimah, Abdul Halim and Suhaimi, Mohd Daud and Nurdiyana, Zahed and Abdul Adam, Abdullah (2017) Development of Comprehensive Unattended Child Warning and Feedback System in Vehicle. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01008).

Nurul Husna, Zakaria and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2017) Lean Manufacturing Implementation in Reducing Waste for Electronic Assembly Line. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01048). ISSN 2261-236X

Redhwan, A. A. M. and Azmi, W. H. and M. Z., Sharif and Nurul Nadia, Mohd Zawawi (2017) Thermal Conductivity Enhancement of Al2O3 and SiO2 Nanolubricants for Application in Automotive Air Conditioning (AAC) System. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01051). ISSN 2261-236X

Siti Norazila, Zahari and M. S. M., Sani and M., Ishak (2017) Finite Element Modelling and Updating of Friction Stir Welding (FSW) Joint for Vibration Analysis. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01021). ISSN 2261-236X

Syaiful Azmirul, Mohd Rozlan and Izzuddin, Zaman and Bukhari, Manshoor and Amir, Khalid and Shiau, Wei Chan and M. S. M., Sani (2017) Theoretical Modelling of a Beam with Attached Spring-Mass-Damper System. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01030). ISSN 2261-236X

W. M., Asyraf and Vasu, Anusuiah and Hagos, F. Y. and M. M., Noor and R., Mamat (2017) Transient Modelling of Heat Loading of Phase Change Material for Energy Storage. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12., 90 (01078). ISSN 2261-236X

Zulkifli, Syafiq and Othman, Fahmi and Awad, Omar I. and Abdul Adam, Abdullah (2017) The Study of Stability, Combustion Characteristics and Performance of Water in Diesel Emulsion Fuel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01022). ISSN 2261-236X