Items where Division is "Centre of Excellence: Automotive Engineering Centre
Centre of Excellence: Automotive Engineering Centre" and Year is 2018

A

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514. (Published)

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14..

Abdul Adam, Abdullah and M. Akmal, Adzmi and Afif, Naqiuddin (2018) Combustion characteristics of biodiesel blended with Al2O3 and SiO2 nanoparticles. In: 3rd Automotive Innovation And Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Indera Mahkota, Kuantan. pp. 1-11.. (Unpublished)

Alsibai, Mohammed Hayyan and Nurul Nadia, Nor Hamran and Abdul Nasir, Abd Ghafar and Abdul Adam, Abdullah (2018) A monitoring system for EPW safe use. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 131-135. ISSN 2180-1843. (Published)

Aminullah, A. R. M. and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Nurul Nadia, Mohd Zawawi and K., Kadirgama and M. N. S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) Compressor by using Al2O3/PAG Nanolubricant. Journal of Mechanical Engineering, SI 5 (1). pp. 49-61. ISSN 1823-5514. (Published)

Ang, F. Chen and M. Akmal, Adzmi and Abdul Adam, Abdullah and Mohd Fahmi, Othman and Mohd Kamal, Kamaruzzaman and Anes, G. Mrwan (2018) Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management, 171. pp. 461-477. ISSN 0196-8904. (Published)

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361. (Published)

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321. (Published)

B

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

C

Chala, G. T. and Abd Rashid, Abd Aziz and Hagos, F. Y. (2018) Natural Gas Engine Technologies: Challenges and Energy Sustainability Issue. Energies, 11 (11). pp. 1-44. ISSN 1996-1073. (Published)

H

H. M., Mahmudul and Hagos, F. Y. and M. Mukhtar, N. A. and R., Mamat and Abdul Adam, Abdullah (2018) Effect of alcohol on diesel engine combustion operating with biodiesel-diesel blend at idling conditions. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-10., 318 (1). ISSN 17578981 (print);1757-899X (online)

Hassan, Md Mahmudul and Hagos, F. Y. and R., Mamat (2018) Comparative analysis of diesel, diesel-palm biodiesel and diesel-biodiesel-butanol blends in diesel engine. In: ASME Proceedings: 12th International Conference on Energy Sustainability , 24-28 June 2018 , Lake Buena Vista, Florida, USA. pp. 1-11. (ES2018-7571). ISBN 978-0-7918-5141-8

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes Abdulla G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hoang, A. T. and M. M., Noor and Pham, X. D. (2018) Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (1). pp. 5110-5125. ISSN 2180-1606. (Published)

Hussein, Adnan M. and Lingenthiran, Samylingam and K., Kadirgama and M. M., Noor and Aik, L. K. (2018) Palm oil based nanofluids for enhancing heat transfer and rheological properties. Heat and Mass Transfer, 54 (10). pp. 3163-3169. ISSN 0947-7411 (Print); 1432-1181 (Online). (Published)

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. and R., Mamat (2018) Performance and land footprint analysis of a solar photovoltaic tree. Journal of Cleaner Production, 187. pp. 432-448. ISSN 1879-1786. (Published)

I

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and I. M., Izhar and S. M., Asyraf and R. I. M., Eiman (2018) The investigation of vehicle dynamic behaviour during braking at different speed. In: 3rd International Conference On Design And Manufacturing Engineering (ICDME2018) , 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-11.. (Unpublished)

K

K., Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2018) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer, 118. pp. 617-627. ISSN 0017-9310. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat and Sharma, K. V. (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1143-1152. ISSN 0017-9310. (Published)

L

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

M

M., Ishak and M. N. M., Salleh and Aiman, Mohd Halil and A. M., Hanafi (2018) Investigation on the weld geometry of fiber laser dissimilar welded of boron steel for TWB application. In: Joining and Welding Symposium 2018 (JWS 2018) , 23 October 2018 , Library, UMP Pekan. pp. 1-10.. (Unpublished)

M. F., Nabil and Azmi, W. H. and Abdul Hamid, K. and R., Mamat (2018) Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer, 124. pp. 1361-1369. ISSN 0017-9310. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311. (Published)

M. N., Harith and R. A., Bakar and D., Ramasamy and K., Kadirgama and Ma, Quanjin (2018) A study of waste and delivery valve design modification to the pump performance. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-12., 342 (012090). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z., Sharif and Azmi, W. H. and R., Mamat and A. I. M., Shaiful (2018) Mechanism for improvement in refrigeration system performance by using nanorefrigerants and nanolubricants - A review. International Communications in Heat and Mass Transfer, 92. pp. 56-63. ISSN 0735-1933. (Published)

Mohamad Heerwan, Peeie and S. M., Asyraf and Muhammad Izhar, Ishak (2018) The comparison respond of braking torque control between PID and SMC controller for electric powered wheelchair descending on slope condition. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-9., 342 (1). ISSN 17578981

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) Thermal analysis of earth-to-air heat exchanger using laboratory simulator. Applied Thermal Engineering, 134. pp. 130-140. ISSN 1359-4311. (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) The thermal characteristics and performance of a ground heat exchanger for tropical climates. Renewable Energy, 121. pp. 528-538. ISSN 0960-1481 . (Published)

Muhammad Nabil Fikri, Mohamad and Azmi, W. H. and Khamisah, Abdu Hamid and R., Mamat (2018) Heat transfer performance of Tio2– SiO2 nanofluid in water-ethylene glycol mixture. Journal of Mechanical Engineering, SI 5 (1). pp. 39-48. ISSN 1823-5514. (Published)

N

N. A., Nazri and M. S. M., Sani and M. N., Abdul Rani and M. A., Yunus (2018) Joining strategy analysis of structural dynamic in top hat plate of dissimilar materials. In: International Conference On Noise, Vibration and Comfort (NVC 2018) , 5-7 March 2018 , Putrajaya Dorset, Putrajaya. pp. 1-9.. (Unpublished)

N. W., Awang and D., Ramasamy and M. M., Rahman and M. M., Noor and K., Kadirgama (2018) Wear testing analysis on cylinder head valve for CNG fueled engine. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. p. 1.. (Unpublished)

Ngu, Tai Tieng and Hagos, F. Y. and A. Rashid, A. Aziz and R., Mamat (2018) CFD modelling of combustion of CNG and hydrogen-rich syngas under a dual fueling strategy. In: 5th International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications , 18 - 20 Julai 2018 , University of Aveiro, Portugal. pp. 1-19.. (Unpublished)

Nurul Nadia, Mohd Zawawi and W. H., Azmi and A. A. M., Redhwan and M. Z., Sharif (2018) Thermo-Physical Properties of Metal Oxides Composite Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 28-38. ISSN 1823-5514. (Published)

R

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933. (Published)

S

S. K., Lim and M. F., Zamri and A. R., Yusoff (2018) Numerical simulation of hot press forming process for quenchable sheet metal between nanocoolant and chilled water. In: 9th International Conference on Nanoscience & Nanotechnology (NANO-SCIETECH 2018) , 26 February - 1 March 2018 , UiTM, Shah Alam. pp. 1-2.. (Unpublished)

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Izhar and I. M., Zulhilmi and J. M., Zikri and S. C., Hern (2018) Parameters estimation and calibration of bldc motor for electric powered wheelchair. In: International conference on science, engineering and technology (I-SET 2018) , 2 - 3 May 2018 , Convention Centre, University of Muhammadiyah (UNMUHA) Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

Samykano, Mahendran and Santhip, - and W. K., Ngui and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2018) Magnetic nanowires (Ni) via chemical reduction method. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Sudhakar, K. and R., Mamat and Mahendran, Samykano and Azmi, W. H. and W. F. W., Ishak and Yusaf, Talal (2018) An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91. pp. 165-179. ISSN 1364-0321. (Published)

T

Tai, K. Siang and Anusuiah, Vasu and Hagos, F. Y. and M. M., Noor and R., Mamat and K., Kadirgama and Azmi, W. H. and Samykano, Mahendran and Sharma, Ravi Kumar (2018) Effect of loading temperature on thermophysical properties of paraffin wax as PCM for thermal energy storage. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 55..

Z

Zuhaira, Abdullah and Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mohd Firdaus, Taufik and Mrwan, Anes G. (2018) Effect of pentanol-diesel fuel blends on thermo-physical properties, combustion characteristics, engine performance and emissions of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5435-5450. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zulhishamuddin, A. R. and S. N., Aqida and Mohd Rashidi, Maarof (2018) A comparative study on wear behaviour of Cr/Mo surface modified grey cast iron. Optics & Laser Technology, 104. pp. 164-169. ISSN 0030-3992. (Published)