Items where Division is "Faculty of Manufacturing Engineering" and Year is 2014

A

A., Hameed and Abdulrazak, Lway Faisal (2014) Terrestrial-To-Satellite Interference In The C band: Tractable Calculation Technique. Journal of Theoretical and Applied Information Technology, 65 (3). pp. 762-769. ISSN 1992-8645 (print); 817-3195 (online). (Published)

A., Hameed and Oudah, Ali A. (2014) Effect of Information and Communication Technology on Career Results: Does Knowledge Sharing Matter? Journal of Engineering and Applied Sciences, 9 (5). pp. 153-162. ISSN 1816-949x (Print); 1818-7803 (Online). (Published)

A., Hameed and Oudah, Ali A. (2014) Improved MMSE Scheme in Cooperative Base Station Systems. Asian Journal of lnformation Technology, 13 (10). pp. 646-652. ISSN 1682-3915 (Print); 1993-5994 (Online). (Published)

A., Hameed and Oudah, Ali A. (2014) Improved Methodology for Mobile Commerce Applications. International Journal of Software Engineering and Its Applications (IJSEIA), 8 (8). pp. 29-42. ISSN 1738 - 9984. (Published)

A., Hameed and Oudah, Ali A. (2014) On The Impact of User Payload on Deployment Requirements of LTE Networks. Wseas Transactions On Communications, 13. pp. 348-354. ISSN 2224-2864. (Published)

A., Hameed and Oudah, Ali A. (2014) The Relationships Between Wireless Network Communication, It Flexibility, It Architecture, And Strategic Alignment: An Empirical Study. Journal of Theoretical and Applied Information Technology, 67 (2). pp. 504-512. ISSN 1992-8645 (print); 817-3195 (online). (Published)

A., Hameed and Oudah, Ali A. (2014) Rerouting Techniques in ATM Networks. International Journal of Future Generation Communication and Networking, 7 (4). pp. 59-70. ISSN 2233-7857 . (Published)

A., Hameed and Oudah, Ali A. and Izzeldin, I. Mohd (2014) Novel Microstrip Antenna Design. International Journal of Smart Home, 8 (6). pp. 191-196. ISSN 1975-4094. (Published)

A. K., Prasada Rao (2014) Understanding the Evolution of the Microstructure in Melt-Conditioned Direct-Chill Cast Al Alloys. Materials and Manufacturing Processes, 29 (7). pp. 848-852. ISSN 1042-6914. (Published)

A. R., Yusoff and Mohamad Syahmi, Shahrom (2014) Review of Aluminum Chip Machining Using Direct Recycling Process. Advanced Materials Research, 903. pp. 157-162. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ahamed, Nizam Uddin and Ahmed, Nasim and Ali, Md. Sharafat and Ahmad, Badlishah and Rahman, S. A. M. Matiur (2014) Analysis EDFA Gain in OCDMA System for Fiber-to-the-Home Network. International Journal of Microwave & Optical Technology (IJMOT), 9 (3). pp. 244-248. ISSN 1553-0396. (Published)

Ahamed, Nizam Uddin and Sundaraj, K and Alqahtani, Mahdi and Altwijri, Omar and Ali, A and Islam, A (2014) EMG-force relationship during static contraction: Effects on sensor placement locations on biceps brachii muscle. Technology and Health Care, 22 (4). pp. 505-513. ISSN 0928-7329. (Published)

Ahmad Faizal, Mohd Zain and Jia, Wei Low and Nafarizal, Nayan and Mohd Zainizan, Sahdan and Mohd Khairul, Ahmad and Ali Yeon, Md Shakaff and Ammar, Zakaria (2014) Correlation Between the Microstructure of Copper Oxide Thin Film and Its Gas Sensing Response. In: Proceedings of the IEEE International Conference on Semiconductor Electronics (ICSE 2014)) , 27-29 August 2014 , Kuala Lumpur. pp. 32-35..

Aikhuele, Daniel Osezua and Souleman, Fathi S. and Amir, Azizi (2014) Application of Fuzzy AHP for Ranking Critical Success Factors for the Successful Implementation of Lean Production Technique. Australian Journal of Basic and Applied Sciences, 8 (18). pp. 399-407. ISSN 1991-8178. (Published)

Al-Mamun, Md. Abdullah and Ahmed, Nasim and Ahamed, Nizam Uddin and Rahman, S. A. M. Matiur and Ahmad, Badlishah and Sundaraj, K. (2014) Use of Wireless Sensor and Microcontroller to Develop Water-level Monitoring System. Indian Journal of Science and Technology, 7 (9). pp. 1325-1330. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Amir, Azizi (2014) Integration of Seasonal Autoregressive Integrated Moving Average and Bayesian Methods to Predict Production Throughput Under Random Variables. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1236-1250. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Amir, Azizi (2014) A Decision Model to Assess Current Methods in Capacity Planning for Semiconductor Industry. Australian Journal of Basic and Applied Sciences, 8 (15 (Sp). pp. 319-325. ISSN 1991-8178. (Published)

Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and Sapuan, S. M. and Shahnor, Basri (2014) Velocity Measurements Using High-Speed Imaging System for Impact Test. Advanced Materials Research, 903. pp. 187-193. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Anwar, P. P. Abdul Majeed and Asrul Khairi, Sohaimi and Jamaluddin, Mahmud (2014) Preliminary Numerical Analysis of a Platform Structure. Applied Mechanics and Materials, 680. pp. 280-283. ISSN 1662-7482. (Published)

Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Nor Azmi, Ab Patar and Ahmad Fahmi, Said and Jamaluddin, Mahmud (2014) System Integration and Control of Dynamic Ankle Foot Orthosis for Lower Limb Rehabilitation. In: IEEE International Symposium on Technology Management and Emerging Technologies (ISTMET 2014) , 27-29 May 2014 , Bandung, Indonesia. pp. 82-85.. ISBN 978-1-4799-3703-5

Anwar, P. P. Abdul Majeed and Siti Hajar, Mohd Yusop and Mohd Nor Azmi, Ab Patar and Jamaluddin, Mahmud (2014) A Parametric Investigation on the Neo-Hookean Material Constant. Advanced Materials Research, 915-916. pp. 853-857. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Azizi, Amir and Razieh, Maleki (2014) Comparative Study of AHP and ANP on Multi-Automotive Suppliers with Multi-Criteria. In: Proceedings of Proceedings of the International MultiConference of Engineers and Computer Scientists,Vol II, (IMECS 2014) , 12-14 March 2014 , Hong Kong. pp. 1-6..

Azizi, Amir and Sorooshian, Shahryar (2014) Different Approaches to Overcome Uncertainties of Production Systems. In: International Conference on Mathematics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-8..

Azmir, Azhari and Schindler, Christian and Hilbert, K. and Godardb, C. and Kerscher, Eberhard (2014) Influence of Waterjet Peening and Smoothing on the Material Surface and Properties of Stainless Steel 304. Surface and Coatings Technology, 258 (Nov.). pp. 1176-1182. ISSN 0257-8972. (Published)

Azmir, Azhari and Schindler, Christian and Nkoumbou, Jhislain and Kerscher, Eberhard (2014) Surface Erosion of Carbon Steel 1045 During Waterjet Peening. Journal of Materials Engineering and Performance, 23 (5). pp. 1870-1880. ISSN 1059-9495. (Published)

Aznilnda, Zainodin and Aida Khairunisa, Ab. Kadir and M. Nasir, Ayob and Ahmad Fariz, Hasan and Amar Faiz, Zainal Abidin and Fazlinashatul Suhaidah, Zahid and Hazriq Izuan, Jafar and Ismail, Mohd Khairuddin (2014) An Experimental Study Of Combinational Logic Circuit Minimization Using Firefly Algorithm. Coloquium on Robotics, Unmaned Systems And Cybernetics 2014 (CRUSC 2014). pp. 17-21. (Published)

B

Badhrulhisham, Abdul Aziz and Wan Azhar, Wan Yusoff (2014) Leadership & Communication Skills. In: Career Readiness Certification Program for UMP Final Year Students , Kuantan, Pahang. . (Unpublished)

D

Das, Sanjeev and Barekar, NS and Fakir, Omer El and Wang, Liliang and A. K., Prasada Rao and Patel, JB and Kotadia, HR and Bhagurkar, A and Dear, John P and Fan, Z (2014) Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting. Materials Science and Engineering: A, 620. pp. 223-232. ISSN 0921-5093. (Published)

F

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Framework for Design Engineers using Improved Rough-Grey Analysis - A Case Study. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 366-373. ISSN 1991-8178. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Method for Design Engineer in Manufacturing Industries using Integrated Rough-Grey Analysis Approach. Applied Mechanics and Materials, 660. pp. 1052-1056. ISSN 1662-7482. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) A Three-stage Methodology for Design Evaluation in Product Development. International Journal of Computers & Technology, 12 (6). pp. 3602-3625. ISSN 2277-3061. (Published)

Fatchurrohman, Nanang and Ismed, Iskandar and Suraya, Sulaiman and Kartina, Johan (2014) Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component. Applied Mechanics and Materials, 695. pp. 32-35. ISSN 1662-7482. (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2014) Implementation of Concurrent Engineering and Analytical Network Process In Manufacturing Process and Material Analysis of Metal Matrix Composites Automotive Component. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10..

Fazilah, Abdul Aziz and Nur Najmiah, Jaafar and Suraya, Sulaiman (2014) Critical Success Factors of New Product Development and Impact on Performance of Malaysian Automotive Industry. Advanced Materials Research, 903. pp. 431-437. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

G

Ghazirah, Mustapha and Wan Ruzaini, Wan Sulaiman and Anwar, P. P. Abdul Majeed and Nur Hayati, Mohd Yahya and Jamaluddin, Mahmud (2014) Kinematics and Efficacy Analysis of the Seni Silat Cekak Malaysia (Kaedah A). Applied Mechanics and Materials, 680. pp. 267-270. ISSN 1662-7482. (Published)

H

H. A., Salaam and Zahari, Taha and T.M.Y.S, Tuan Ya and Mohd Razali, Mohamad (2014) Sustainability Product Design Assessment: A Case Study of a Screw Design. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. pp. 517-524..

Hasimah, Sapiri and Razman, Mat Tahar (2014) System Dynamics Approach As A Risk Management Tool In Analyzing Pension Expenditure: The Case Of Malaysian Employees Public Pension Plan. The Singapore Economic Review, 59 (5). ISSN 0217-5908. (Published)

I

I., Ismail and S. N., Aqida (2014) Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application. Key Engineering Materials, 611 (612). pp. 746-755. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2014) Experimental and Numerical Study on the Low Cycle Fatigue Behaviour of a Cast Hybrid Metal Matrix Composites. In: International Conference on Automotive Innovation and Green Energy Vehicle , 26-27 August 2014 , Kuantan, Pahang. pp. 1-11.. (Unpublished)

Ismail, Mohd Khairuddin and Amira Sarayati, Ahmad Dahalan and Amar Faiz, Zainal Abidin and Yee, Yang Lai and Nur Anis, Nordin and Siti Fatimah, Sulaiman and Hazriq Izzuan, Jaafar and Syahrul Hisham, Mohamad and Noor Hafizah, Amer (2014) Modeling and Simulation of Swarm Intelligence Algorithms for Parameters Tuning of PID Controller in Industrial Couple Tank System. Advanced Materials Research, 903. pp. 321-326. ISSN 1662-8985. (Published)

Ismail, Mohd Khairuddin and Siti Fatimah, Sulaiman and Khairuddin, Osman and Mohd Fu'ad, Rahmat and Amar Faiz, Zainal Abidin (2014) Tracking Performances of A Hot Air Blower System Using Different Types Of Controllers. Journal of Theoretical and Applied Information Technology, 69 (2). pp. 385-393. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Ismail, Ibrahim and Hamzah, Ahmad and Zuwairie, Ibrahim and Mohd Falfazli, Mat Jusof and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Kamal, Khalil and Muhammad Arif, Abdul Rahim (2014) Multi-State Particle Swarm Optimization for Discrete Combinatorial Optimization Problem. International Journal of Simulation: Systems, Science & Technology (IJSSST), 15 (1). pp. 15-25. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Mohd Falfazli, Mat Jusof and Zulkifli, Md. Yusof and Sophan Wahyudi, Nawawi and Marizan, Mubin (2014) Gravitational Search Algorithm for Assembly Sequence Planning. In: Colloquium on Robotics, Unmanned Systems And Cybernetics 2014 (CRUSC 2014) , 20 Nov 2014 , Universiti Malaysia Pahang. pp. 32-36..

Ismail, Mohd Khairuddin and Anwar, P. P. A. Majeed and Abdul Aziz, Jaafar and Jessnor Arif, Mat Jizat (2014) Modeling and PID Control of a Quadrotor Aerial Robot. Advanced Materials Research, 903. pp. 327-331. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ismail, Mohd Khairuddin and Anwar, P. P. Abdul Majeed and Ann, Lim and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar (2014) Altitude and Attitude Control of a Trirotor UAV. Advanced Materials Research, 903. pp. 309-314. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Izzeldin, I. Mohd and Oudah, Ali A. and A., Hameed (2014) Modern Control Techniques in Wind Turbine. International Journal of Hybrid Information Technology, 7 (4). pp. 101-122. ISSN 1738-9968. (Published)

J

Jessnor Arif, Mat Jizat (2014) Landmark guided trajectory of an automated guided vehicle using omnidirectional vision. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zahari, Taha).

L

Latiff, M. I. A. and Jamaludin, S. N. S. and Basri, S. and Hussain, A. and Alothmany, D. S. and Mustapha, F. and Nuruzzaman, D. M. and Ismail, N. M. and Ismail, I. (2014) Effect of Sintering Temperature on Functionally Graded Nickel/Alumina Plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

M

M., Malik and R., Sharif and S., Sharif and Wan Azhar, Wan Yusoff (2014) Performance of TialN coated carbide tool in peck drilling stainless steel SS316L with pressurized minimum quantity lubrication. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 332-339. ISSN 1991-8178. (Published)

M. Farid, M. Sharif and M. A. Hanafiah, Saharudin and M. Shaifil Hakimin, M. Sakri and Nur Asyran Wani, Baharom (2014) Experimental Analysis on Cooling Channels Parameters in Hot Stamping Tools (SKD61). American-Eurasian Journal of Sustainable Agriculture, 8 (11). pp. 44-48. ISSN 1995-0748. (Published)

M. H., Firdaus and A. R., Yusoff and Muhammad Hatifi, Mansor and Mohd Tarmizy, Che Kar (2014) Parametric Study of an Electromagnetic Energy Harvester. Applied Mechanics and Materials, 471. pp. 113-118. ISSN 1662-7482. (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thickness Using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thicknesses using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Cutting Tools in Finishing Operations for CNC Rapid Manufacturing Processes: Simulation Studies. In: Advances in Manufacturing Technology XXVIII: Proceedings of the 12 th International Conference on Manufacturing Research (ICMR2014) , 9-11 September 2014 , Southampton Solent University. pp. 163-168.. ISBN 978-0-9926958-4-2

M. Nafis, O. Z. and Case, Keith and Watts, Darren (2014) Optimization of Roughing Operations in CNC Machining for Rapid Manufacturing Processes. Production & Manufacturing Research, 2 (1). pp. 519-529. ISSN 2169-3277. (Published)

Mebrahitom, A. and Azmir, Azhari (2014) Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM. Advanced Materials Research, 1133. pp. 339-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohamad Rusydi, Mohamad Yasin (2014) Prof. Emeritus Dr. Ario kongsi kepakaran teknologi kejuruteraan pembuatan. CREATE . p. 13. ISSN 1823-7487

Mohd Ali Hanafiah, Shaharudin (2014) Estimation of thermal contact conductance value between boron steel blank and tool surface at different value of applied pressure in hot stamping process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azhar, Sahwan and Mohd Nizam A., Rahman and Baba, M. Deros (2014) Case Studies on the Implementation of Lean Manufacturing in the Automotive Malaysian Companies. Applied Mechanics and Materials, 465-46. pp. 1180-1184. ISSN 1662-7482. (Published)

Mohd Azmir, Mohd Azhari (2014) A new method for waterjet peening process improvement using a combination of waterjet surface hardening and polishing. , [Research Book Profile: Research Report] (Unpublished)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff (2014) Bouc-Wen Model Parameter Identification for a MR Fluid Damper Using Particle Swarm Optimization. Advanced Materials Research, 903. pp. 279-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2014) Optimizing Hysteresis Parameters Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10.. (Unpublished)

Mohd Azraai, Mohd Razman (2014) Bouc-Wen model parameter identification for a new magneto-rheologigal fluid damper using particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Priyandoko, Gigih).

Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Idris Shah, Ismail and Zahari, Taha (2014) Surface Hardening of Tool Steel by Plasma Arc with Multiple Passes. International Journal of Technology, 5 (1). pp. 79-87. ISSN 2086-9614. (Published)

Mohd Zairulnizam, Mohd Zawawi and Nik Mohd Hafiz Aiman, Nik Haron (2014) Effect of Process Parameters in Hot Press Forming Operation to Tensile Strength of Ultra High Strength Steel. Advanced Materials Research, 974. pp. 179-182. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Zairulnizam, Mohd Zawawi and Mohd Ali Hanafiah, Shaharudin and Ahmad Rosli, Abdul Manaf (2014) Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine. Advanced Materials Research, 903. pp. 194-199. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Molamohamadi, Zohreh and Arshizadeh, Rahman and Napsiah, Ismail and Amir, Azizi (2014) An economic order quantity model with completely backordering and nondecreasing demand under two-level trade credit. Advances in Decision Sciences, 2014 (340135). pp. 1-11. ISSN 2090-3359. (Published)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Munira, Ali and Nur Najmiyah, Jaafar and Fazilah, Abdul Aziz and Nooraizedfiza, Zainon (2014) Review on Non Uniform Rational B-Spline (NURBS)Concept and Optimization. Advanced Materials Research, 903. pp. 338-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

N

N. M., Razali (2014) Process Sequencing Modeled as TSP with Precedence Constraints - A Genetic Algorithm Approach. Applied Mechanics and Materials, 575. pp. 843-847. ISSN 1662-7482. (Published)

Ng Liang, Shing (2014) Part Time "Gardeners as "Nuclei of Sustainable Communities". In: National Urban Horticulture Conference , 16 April 2014 , Johor Bahru. pp. 3-7..

Noraini, Mohd Razali and Iskandar, Ismed (2014) Multi-Mode Failure Models for Attribute Test Data in Reliability Systems, a Bayesian Analysis Approach Using Multi-Nomial Distribution Model. Advanced Materials Research, 903. pp. 419-424. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nur Iffah, Mohamed Azmi (2014) Optimization of PID parameters for hydraulic positioning system utilizing variable weight Grey-Taguchi and particle swarm optimization. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurrina, Rosli and Amagai, Kenji (2014) Measurement of Liquid Sheet using Laser Tagging Method by Photochromic Dye. Experiments in Fluids, 55 (12). pp. 1-15. ISSN 07234864. (Published)

Nurul Afiqah, Zainal and Sasikala, Ganaisan and Ajisman, Apen (2014) Optimum Solar Panel Implementation Using DC-DC Boost Converter Controlled by Fuzzy Logic Controller. In: International Conference on Electrical Power Engineering and Applications (ICEPEA 2014) , 15-16 November 2014 , Langkawi, Kedah. .

Nurul Afiqah, Zainal and Viknesh, Punichelvan and Ajisman, Apen (2014) Flywheel Energy Storage for Wind Energy System with SEIG-Motor Set. In: International Conference on Electrical Power Engineering and Applications (ICEPEA 2014) , 15-16 November 2014 , Langkawi, Kedah. .

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, A. and Rahman, M. and Roy, B. K. and Chakraborty, S. and Hossen, S. and Uddin, I. and Hossain, S. (2014) Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces. Middle-East Journal of Scientific Research, 21 (3). pp. 477-486. ISSN 1990-9233. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Chowdhury, M. A. K. and Roy, B. K. (2014) Experimental Study of Friction Coefficient and Wear Rate of Turned and Ground Mild Steel Surfaces Sliding Against Smooth and Rough SS304 Counterfaces. Australian Journal of Mechanical Engineering, 12 (3). pp. 291-304. ISSN 1448-4846. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Kowser, M. A. and M. M., Rahman and Roy, B. K. and Chakraborty, S. and Islam, M. D. and Aktaruzzaman, M. and Mohammad, N. (2014) Sliding Friction of Steel Combinations. The Open Mechanical Engineering Journal, 8. pp. 364-369. ISSN 1874-155X. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, Mohammad Lutfar (2014) Frictional Characteristics of Steel Materials Sliding against Mild Steel. Advanced Materials Research, 903. pp. 33-38. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Roy, B. K. and Sorker, N. Ch. and Karim, R. and Hasan, M. and Mia, S. (2014) Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials. Journal of the Balkan Tribological Association, 20 (2). pp. 169-183. ISSN 1310-4772. (Published)

Nuruzzaman, D. M. and Rahaman, Mohammad Lutfar and Chowdhury, M. A. (2014) Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding Against Different Counterface Materials. Advanced Materials Research, 903. pp. 90-95. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

O

Oudah, Ali A. (2014) Routing Schemes for Wireless ATM Networks. International Journal of Energy, Information and Communications, 5 (3). pp. 35-46. ISSN 2093-9655. (Published)

Oudah, Ali A. and A., Hameed (2014) Interference in Wireless Networks: Causes, Analyses and Practical Mitigating Techniques. Modern Applied Science, 8 (5). pp. 56-62. ISSN 1913-1844 (printed); 1913-1852 (online). (Published)

Oudah, Ali A. and A., Hameed and Izzeldin, I. Mohd (2014) The Impact Of Information On Job Outcomes. Journal of Theoretical and Applied Information Technology, 69 (2). pp. 240-246. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Oudah, Ali A. and Izzeldin, I. Mohd and A., Hameed (2014) Wind Turbines Control: Features and Trends. Modern Applied Science, 8 (6). pp. 272-295. ISSN 1913-1844 (printed), 1913-1852 (online). (Published)

Oudah, Ali A. and Izzeldin, I. Mohd and A., Hameed and Zulkifli, Md. Yusof (2014) Wind Turbines: Novel Control Algorithm in Region II. Journal Electronic Engineering Technology, 91. pp. 742-749. ISSN 1975-0102 (Print); 2093-7423 (Online). (Published)

R

Ramaraju, Ramgopal Varma and Rao, G. Venkateswazra (2014) Combined effects of geometric and material non-linearities on one dimensional structural members. International Journal of Engineering Technology And Sciences (IJETS), 1 (1). pp. 1-4. ISSN 2289-697X. (Published)

S

Siti Nur Sakinah, Jamaludin and Shah Nor, Basri and Hussain, Ahmad and Al-Othmany, Dheya Shujaa and F., Mustapha and Nuruzzaman, D. M. (2014) Three-Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate. Mathematical Problems in Engineering, 2014. pp. 1-20. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Siti Nursyuhada, Mahsahirun and Ajisman, Apen (2014) Developing Analog PWM Inverter for Induction Motor Control. Australian Journal of Basic and Applied Sciences, 8 (4 (Spe). pp. 567-572. ISSN 1991-8178. (Published)

Suraya, Sulaiman and Shamsuddin, Sulaiman and Munira, Ali and Fazilah, Adbul Aziz (2014) Effect of TiC Particulates on the Microstructure and Mechanical Properties of Aluminium-Based Metal Matrix Composite. Advanced Materials Research, 903. pp. 145-150. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Suraya, Sulaiman and Shamsuddin, Sulaiman and Nur Najmiyah, Jaafar and Nor Imrah, Yusoff (2014) Studies on Tensile Properties of Titanium Carbide (TiC) Particulates Composites. Advanced Materials Research, 903. pp. 151-156. ISSN 1022-6680 (print), 1662-8985 (online). (Unpublished) (Unpublished)

Y

Yusof, Hashim and Zahari, Taha (2014) The Impact of Ergonomics Driving Risk Factors on Musculoskeletal Health of Malaysian Express Bus Drivers. International Journal of Contemporary Business Management (IJCBM), 1 (1). pp. 20-29. (Published)

Z

Zahari, Taha (2014) Technological Innovation for the Development of Industry in Aceh. In: 4th Annual International Conference (AIC) of Syiah Kuala University , 21-24 October 2014 , Banda Aceh, Indonesia. .

Zahari, Taha and Nahidul Hoque , Samrat and Norhafizan, Ahmad and Choudhury, I.A. (2014) Prospect of Wave Energy in Malaysia. In: IEEE 8th International Power Engineering and Optimization Conference (PEOCO 2014) , 24-25 March 2014 , Langkawi. pp. 127-132..

Zahari, Taha and Yusof, Hashim (2014) Ergonomic Assessment on Physical Fatigue among Malaysian Express Bus Drivers: Partial Least Squares (PLS) Approach. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. .

Zahari, Taha (2014) Tun Mahathir penggerak Industri Automotif Negara. CREATE . pp. 10-11. ISSN 1823-7487

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Hasanuddin, Iskandar and Mohd Azri, Aris and Anwar, P. P. A. Majeed (2014) Impact-absorbing Materials in Reducing Brain Vibration Caused by Ball-to-head Impact in Soccer. Procedia Engineering: The Engineering of Sport 10, 72. pp. 515-520. ISSN 1877-7058. (Published)

Zahari, Taha and Raja Ariffin, Raja Ghazilla and Sumiani, Yusoff and Salwa Hanim, Abdul-Rashid (2014) Development of Decision Support System for Fastener Selection in Product Recovery Oriented Design. The International Journal of Advanced Manufacturing Technology, 70 (5-8). pp. 1403-1413. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zahari, Taha and Sakundarini, Novita and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla (2014) Incorporation of High Recyclability Material Selection in Computer Aided Design. Materials and Design, 56. pp. 740-749. ISSN 0261-3069. (Published)

Zahari, Taha and Samrat, Nahidul Hoque and Norhafizan, Ahmad and Choudhury, Ahmed Imtiaz (2014) Modeling, Control, and Simulation of Battery Storage Photovoltaic-Wave Energy Hybrid Renewable Power Generation Systems for Island Electrification in Malaysia. The Scientific World Journal, 2014. pp. 1-21. ISSN 2356-6140 (print); 1537-744X (online). (Published)

Zahari, Taha and Teuku, Firsa and Raja Ariffin, Raja Ghazilla (2014) AVL Boost Simulation of Engine Performance and Emission for Compressed Natural Gas Direct Injection Engine. Journal of Energy & Environment, 6 (1). pp. 1-3. ISSN 1985-7462. (Published)

Zainal Ariffin, Selamat and Razali, M. and A. R., Yusoff and M. M., Rahman (2014) Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented. Australian Journal of Basic and Applied Sciences, 8 (4 (Special)). pp. 695-699. ISSN 1991-8178. (Published)

Zamzuri, Hamedon and Mori, K. and Abe, Y. (2014) In-situ Measurement of Three-dimensional Deformation Behaviour of Sheet and Tools During Stamping Using Borescope. Journal of Materials Processing Technology, 214 (4). pp. 945-950. ISSN 0924-0136. (Published)

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei (2014) Hemming for Joining High Strength Steel Sheets. Procedia Engineering: The Engineering of Sport 10, 81. pp. 2074-2079. ISSN 1877-7058. (Published)

Zamzuri, Hamedon and Mori, Ken-ichiro and Abe, Yohei and Watanabe, Saharu (2014) Prevention of Wrinkling in Shrink Flanging of Ultra-High Strength Steel Sheets Using Gradually Contacting Punch. Journal of the Japan Society for Technology of Plasticity, 55 (639). pp. 341-345. (Published)

Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zuwairie, Ibrahim and Zulkifli, Md. Yusof and Shahdan, Sudin and Sophan Wahyudi, Nawawi and Amar Faiz, Zainal Abidin and Muhammad Arif, Abdul Rahim and Kamal, Khalil (2014) A Modified Gravitational Search Algorithm for Discrete Optimization Problem. International Journal of Simulation: Systems, Science & Technology (IJSSST), 15 (1). pp. 51-55. ISSN 1473-8031 (print); 1473-804x (online). (Published)