Browse by ID Staff

A

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14..

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Amirruddin, A. K. and Rahman, M. M. and Noor, M. M. and Ramasamy, D. and Harun, W. S W Investigation of dispersion, stability, and tribological performance of oil-based graphene and copper nanofluids. , [Research Report: Research Report] (Unpublished)

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)

Arjun, Asogan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Devarajan, Ramasamy and Kumaran, Kadirgama (2023) Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 326-333. ISSN 2462-1943. (Published)

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361. (Published)

B

Benedict, F. and K., Kadirgama and D., Ramasamy and M. M., Noor and Kumar, M. Asok Raj and M. M., Rahman and Sagmesh, B. (2018) Thermal management of vehicle radiator by nanocellulose with one-dimensional analysis. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020043). ISBN 978-0-7354-1787-8

Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)

D

D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482. (Published)

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online). (Published)

D., Ramasamy and Samykano, Mahendran (2010) Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design By Simulation And Experimental Techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy (2015) Improvement of in cylinder airflow using dissimilar valve lift in a compressed natural gas bi-fuel engine. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy and C.Y., Goh and K., Kadirgama and F., Benedict and M. M., Noor and G., Najafi and A., P.Carlucci (2017) Engine Performance, Exhaust Emission And Combustion Analysis Of A 4-Stroke Spark Ignited Engine Using Dual Fuel Injection. Fuel, 207. pp. 719-728. ISSN 0016-2361. (Published)

D., Ramasamy and K., Kadirgama and M. M., Noor Computational Analysis Of Dissimilar Valve Lift (DVL) Swirl On A Bi-Fuel Compressed Natural Gas (CNG) Engine. 9th International Conference on Advanced Computational Engineering and Experimenting. (Published)

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370. pp. 19-28. ISSN 1662-9507. (Published)

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and K., Kadirgama and Neshabran, Ramachandran and W. H., Azmi (2018) Analysis of dynamic viscosity via experiment and empirical correlation through response surface methodology (rsm) for cellulose nanocrystal (cnc) dispersed in ethylene glycol- water mixture. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished)

D., Ramasamy and K., Mohanesen and R., Maria and Mahendran, Samykano and K., Kadirgama and M. M., Rahman (2020) Analysis of alumina particles size and shape formation from developed planetary ball mill. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052032). ISSN 1757-899X

D., Ramasamy and Kaaliarasan, Ramachandran and G., Kadirgama and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Experimental investigation and empirical model development of thermal conductivity for cellulose nanocrystal (CNC) based nanofluid. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-4.. (Unpublished)

D., Ramasamy and Kaaliarasan, Ramachandran and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Investigation of Dynamic Viscosity Through Experiment and Correlation Determination through Response Surface Methodology for Cellulose Nanocrystal (Cnc) Dispersed in Ethylene Glycol-Water Mixture. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25) , 15-23 May 2017 , Rome, Italy. pp. 1-3.. (Unpublished)

D., Ramasamy and M. M., Noor and M. M., Rahman and W. G. B. , Horizon (2016) Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00031). ISSN 2261-236X

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy and Mahendran, Samykano and Z. A. A., Karim and Nagarajan, T. (2011) Design of valveless micropump using preliminary characteristics from fluid flow. Journal of Applied Sciences, 11 (11). pp. 2072-2075. ISSN 1812-5654. (Published)

D., Ramasamy and Mahendran, Samykano and Zainal Ambri, Abdul Karim and T., Nagarajan (2010) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 1589-1592., II. ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and R. A., Bakar and Mohd Fadzil, Abdul Rahim and M. M., Noor (2008) Comparative Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design Using Simulation And Experimental Techniques. In: Proceedings of the 4th IASTED International Conference, Power And Energy Systems (AsiaPES 2008) , 2-4 April 2008 , Langkawi, Malaysia. pp. 359-362..

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

F

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8

Farhana, K. and K., Kadirgama and M. M., Noor and M. M., Rahman and D., Ramasamy and Mahamude, A. S. F. (2019) CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012041). ISSN 1757-899X

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Farhana, K. and K., Kadirgama and S., Subramonian and D., Ramasamy and M., Samykano and Mahamude, A. S. F. (2023) Applications of graphene nanomaterials in energy storage—A state-of-art short review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 595 -609.. ISSN 2195-4356 ISBN 978-981191456-0

Farhana, K. and Mahamude, A. S. F. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy (2019) Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012069). ISSN 1757-899X

Farhana, Kaniz and K., Kadirgama and Mohamed, Danial and Mahamude, Abu Shadate Faisal and Subramonian, Sivarao and D., Ramasamy and Mahendran, Samykano (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 215-223.. ISSN 2195-4356 ISBN 978-981191456-0

G

G., Kadirgama and A., Kumar and M., Sandhya and L., Samylingam and D., Ramasamy and K., Kadirgama and H. A., Mohammed and M., Samykano and R., Saidur (2022) Graphene nanoplatelets–cellulose nanocrystals in engine oil for automotive applications. Green Materials, Ahead of Print. pp. 1-9. ISSN 2049-1239. (Published)

G., Kadirgama and Mohd Kamal, Kamarulzaman and D., Ramasamy and Kadirgama, Kumaran and Sakinah, Hisham (2023) Classification of lubricants base oils for nanolubricants applications—A review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 205-213.. ISSN 2195-4356 ISBN 978-981191456-0

H

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

I

I., Naiman and K., Kadirgama and D., Ramasamy (2019) Experimental and one dimensional investigation on nanocellulose and aluminium oxide hybrid nanofluid as a new coolant for radiator. In: 1st International Postgraduate Conference On Mechanical Engineering (IPCME 2018) , 31 Oktober 2018 , Library UMP Pekan. pp. 1-8., 469 (1). ISSN 1757-8981

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and D., Ramasamy and S. M., Soffie and Mohd Hafiz Dzarfan, Othman (2019) A review on vehicle radiator using various coolants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 330-337. ISSN 2289-7879. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and D., Ramasamy and Ahmad Shahir, Jamaludin and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim (2019) Effect of impregnate nanocellulose with ethylene glycol for car radiator application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 43-50. ISSN 2289-7879. (Published)

J

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X

J., Mogan and W. S. W., Harun and K., Kadirgama and D., Ramasamy and F. M., Foudzi and A. B., Sulong and F., Tarlochan and F., Ahmad (2023) Fused Deposition Modelling of Polymer Composite: A Progress. Polymers, 15 (1). pp. 1-27. ISSN 2073-4360. (Published)

K

K., Farhana and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and M., Samykano and R., Saidur (2021) Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids. Sustainable Energy Technologies and Assessments, 45 (101049). pp. 1-16. ISSN 2213-1388. (Published)

K., Kadirgama and D., Ramasamy and Kong, Chung Hwa (2017) Assessment of Alternative Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3591-3605. ISSN 1678-5878 (Print); 1806-3691 (Online). (Published)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished)

K., Kadirgama and Kaaliarasan, Ramachandran and D., Ramasamy and W. H., Azmi and Mahendran, Samykano (2018) Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

K., Kadirgama and L., Samylingam and Aslfattahi, Navid and M., Samykano and D., Ramasamy and R., Saidur (2021) Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-10., 1062 (012022). ISSN 1757-8981 (Print); 1757-899X (Online)

K., Kadirgama and M. M., Noor and D., Ramasamy and M. R. M., Rejab (2008) Design and Simulate Mixing of Compressed Natural Gas with Air in a Mixing Device. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis, Malaysia. .

K., Kadirgama and W. S., Wan Harun and Tarlochan, F. and Mahendran, Samykano and D., Ramasamy and Mohd Zaidi, Azir and Mehboob, H. (2018) Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 495-510. ISSN 0268-3768. (Published)

K., Mohanesen and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman (2019) Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012075). ISSN 1757-899X

K., Ramachandran and K., Kadirgama and D., Ramasamy and Azmi, W. H. and F. , Tarlochan (2017) Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental – Statistical approach by using Response Surface Methodology. Applied Thermal Engineering, 122. pp. 473-483. ISSN 1359-4311. (Published)

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90.

Kadirgama, G. and Lee, Muhammad A.M.A. and D., Ramasamy and Kadirgama, Kumaran and Samykano, M. and Yusaf, T. (2024) Thermal Properties of Engine Oils through the Integration of Graphene Nanoparticles: A Greener Approach for Sustainable Mechanical Systems. In: E3S Web of Conf. 1st International Conference on Advanced Materials and Sustainable Energy Technologies, AMSET 2023 , 30 - 31 October 2023 , Bandar Sunway. pp. 1-6., 488 (02011). ISSN 2267-1242

Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Kananathan, J. and Mahendran, Samykano and K., Kadirgama and Ramasamy, D. and Rahman, M. M (2021) Statistical model for impact and energy absorption of 3D printed coconut Wood-PLA. Energy Engineering, 118 (5). pp. 1305-1315. ISSN 0199-8595. (Published)

Kananathan, Jeeven and Samykano, Mahendran and Kadirgama, K. and Devarajan, Ramasamy and Rahman, Md Mustafizur Comprehensive investigation and prediction model for mechanical properties of coconut wood–polylactic acid composites filaments for FDM 3D printing. European Journal of Wood and Wood Products, 80. pp. 75-100. ISSN 0018-3768(print); 1436-736X(online). (Published)

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

L

L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X

L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

M

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy (2023) Emission characteristics effect on rice bran oil enriched with diesel fuel on compression ignition engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 75 -88.. ISSN 2195-4356 ISBN 978-981191456-0

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy and Hussein, A. M. (2024) Enhancement of Efficiency and Mitigation of Pollutan Emissions in a Compression Ignition Engine by the Utilization of Rice Bran Oil as Green Fuel. In: Journal of Physics: Conference Series. 7th International Conference on Mechanical Engineering Research 2023 (ICMER 2023) , 12-13 September 2023 , AC Marriot Hotel, Kuantan, Pahang. pp. 1-23., 2688 (012024). ISSN 1742-6588 (print); 1742-6596 (online)

M., Norhafana and M. M., Noor and Hagos, F. Y. and A. Aziz, Hairuddin and K., Kadirgama and D., Ramasamy and M. M., Rahman and G., Najafi (2019) Study of fuel properties test: Diesel and various blending nanoparticles based diesel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and R., Saidur (2022) Experimental study on properties of hybrid stable & surfactant-free nanofluids GNPs/CNCs (Graphene nanoplatelets/cellulose nanocrystal) in water/ethylene glycol mixture for heat transfer application. Journal of Molecular Liquids, 348 (118019). pp. 1-10. ISSN 0167-7322. (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020) , 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371. (Published)

M. Eaki, . and K., Kadirgama and D., Ramasamy and W. S. W., Harun and Abou-El-Hossein, K. A. and Samylingam, L. and Kok, Chee Kuang (2024) Enhancing Machining performance in Stainless Steel Machining using MXene Coolant: A Detailed Examination. International Journal of Automotive and Mechanical Engineering (IJAME), 21 (1). pp. 10993-11009. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. F., Fariz and C. K., Ihsan and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. T., Hoang (2018) Performance and emission characteristic of compression ignition engine using blend of diesel and canola oil. In: The 7th International Conference On Design And Concurrent Engineering 2018 (IDECON 2018) , 17-18 September 2018 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311. (Published)

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6..

M. M., Noor and K., Kadirgama and D., Ramasamy and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of A High Pressure Compressed Natural Gas Mixer for A 1.5 Litre CNG-Diesel Dual Engine. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and D., Ramasamy and M. S. M., Sani (2008) CFD Simulation And Validation Of The In-Cylinder Within A Motored Two Stroke Si Engine. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608. (Published)

M. N., Harith and R. A., Bakar and D., Ramasamy and K., Kadirgama and Ma, Quanjin (2018) A study of waste and delivery valve design modification to the pump performance. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-12., 342 (012090). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) Interaction effect of machining parameters on material removal rate in machining of AA6061–T6 using MQL conditions. In: 7th International Conference on Mechanical, Automotive and Materials Engineering (CMAME 2019) , 7-11 December 2019 , RMIT University, Melbourne, Australia. pp. 1-7.. (Unpublished)

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019) , 14 - 18 Julai 2019 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished)

Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X

Mahamude, Abu Shadate Faisal and Muhamad Kamal, Kamarulzaman and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Rosli, Abu Bakar and Yusaf, Talal and Subramanion, Sivarao and Yousif, Belal (2022) A Comprehensive Review on Efficiency Enhancement of Solar Collectors Using Hybrid Nanofluids. Energies, 15 (4). ISSN 1996-1073. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, Ramasamy and Farhana, Kaniz and Salih, Khalid and Yusaf, Talal (2022) Experimental study on the efficiency improvement of flat plate solar collector using hybrid nanofluids graphene/waste cotton. Energies, 15 (2309). pp. 1-27. ISSN 1996-1073. (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

Mohammad Shahrul Nizam, Amin Nuddin and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and K., Kadirgama and D., Ramasamy and Wan Sharuzi, Wan Harun (2023) A study on adjustable height stand for temperature scanner. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 115-125. ISSN 2462-1943. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Said, Zafar and Pandey, A. K. (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Saidur, R. and Yusaf, Talal (2023) Improving the thermophysical properties of hybrid nanocellulose-copper (II) oxide (CNC-CuO) as a lubricant additives: A novel nanolubricant for tribology application. Fuel, 332 (126229). pp. 1-15. ISSN 0016-2361. (Published)

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981

Munanday, Anbananthan Pillai and Norazlianie, Sazali and Asogan, Arjun and Ramasamy, Devarajan and Ahmad Shahir, Jamaludin (2023) The Implementation of Transfer Learning by Convolution Neural Network (CNN) for Recognizing Facial Emotions. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 255-276. ISSN 2462-1943. (Published)

N

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque (2019) Preparation methods and challenges of hybrid nanofluids: A review. In: 4th International Symposium on Fluid Mechanics and Thermal Sciences (4TH IS-FMTS 2019) , 13-15 December 2019 , Palm Garden Hotel IOI Resort City, Putrajaya, Malaysia. pp. 1-13.. (Unpublished)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque and M. M., Noor (2017) Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nor Azwadi, Che Sidik (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130. pp. 1163-1169. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and M. M., Rahman and M. M., Noor and K., Kadirgama (2018) Wear testing analysis on cylinder head valve for CNG fueled engine. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. p. 1.. (Unpublished)

N. W., Awang and Sakinah, Hisham and D., Ramasamy and K., Kadirgama and Mohd Kamal, Kamaruzzaman (2023) Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD). In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 351-363.. ISBN 978-981-19-4425-3

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ng, X. H. and R. A., Bakar and Kadirgama, Kumaran and Sivaraos, . and D., Ramasamy and Mahendran, Samykano (2023) The performance of beta type stirling engine using different fuel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 89-110.. ISSN 2195-4356 ISBN 978-981191456-0

Norhafana, M. and M. M., Noor and A. A., Hairuddin and S., Harikrishnan and K., Kadirgama and D., Ramasamy (2020) The effects of nano-additives on exhaust emissions and toxicity on mankind. Materials Today: Proceedings, 22 (Part 3). pp. 1181-1185. ISSN 2214-7853. (Published)

Norhafana, M. and M. M., Noor and A. Aziz, Hairuddin and Hagos, F. Y. and S. I., Ayob and K., Kadirgama and D., Ramasamy (2019) An experimental study of the performance and emission characteristics of a compression ignition (CI) engine fueled with palm oil based biodiesel. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020036). ISBN 978-0-7354-1787-8

Norhafana, M. and M. M., Noor and M. Sharif, Pshtiwan and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2018) An update on nano additive in diesel fuel. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-51.. (Unpublished)

Norhafana, M. and M. M., Noor and Pshtiwan, M. Sharif and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012035). ISSN 1757-899X

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and Murillo, J. Rivas and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2017) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamic simulations. Advanced Science Letters, 23 (11). pp. 11549-11552. ISSN 1936-6612. (Published)

R

R. A., Bakar and D., Ramasamy (2008) Design and Development of Hybrid Electric Vehicle Rear Diffuser. In: National Seminar Science Technology and Sosial Sciences, Malaysia, , 3-4 June, 2008 , nil. . (Unpublished)

R. A., Bakar and Gan, Leong Ming and Wong, Hong Mun and D., Ramasamy and Mohd Fazli, Ismail (2008) Intelligent Height and Reach Adjustable Electronic Chair for Children with Dwarfism (ZUMP). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 47-58. ISSN 1985-5176. (Published)

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rajan, Kumaresan and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and Ngui, Wai Keng and Adarsh Kumar, Pandey (2021) 3D printing technology for thermal application: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 84-97. ISSN 2289-7879. (Published)

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933. (Published)

Ramachandran, Kaaliarasan and K., Kadirgama and D., Ramasamy and Hussein, A.M. and Azmi, W. H. and Tarlochan, F. and Kadirgama, G. (2017) Thermophysical Properties Measurement of Nano Cellulose in Ethylene Glycol/Water. Applied Thermal Engineering, 123. pp. 1158-1165. (Published)

Ramasamy, D. (2013) Engine valve seat wear study on compressed natural gas (CNG)by using nano powder. (Unpublished)

Ramasamy, D. (2008) Series hybrid electronic vehicle cost-effective power train components development. , [Research Report: Research Report] (Unpublished)

Ramasamy, D. and Samykano, M. and Kadirgama, Kumaran and Lee, Giok Chui and Noor, M. M. and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method. , [Research Report: Research Report] (Unpublished)

Ramasamy, Devarajan and Muhamad, Mat Noor and Azlyna, Senawi and Ahmad Syahrizan, Sulaiman (2008) Static recovery process modelling of engineering metallic alloys. In: Proceeding of Malaysian Metallurgical Conference (MMC 2008) , 3-4 December 2008 , UKM, Bangi, Selangor. pp. 1-5..

S

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M., Samykano and W. S., Wan Harun and R., Saidur (2019) Statistical approach for prediction of thermal properties of CNC and CNC-CuO nanolubricant using Response Surface Methodology (RSM). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-14., 788 (012016). ISSN 1757-899X

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and Amirruddin, Abdul Kadir and G., Najafi and M. M., Rahman (2017) Waste Cooking Oil Blended With The Engine Oil For Reduction of Friction and Wear On Piston Skirt. Fuel, 205. pp. 247-261. ISSN 0016-2361. (Published)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and N. W., Awang and Mohd Kamal, Kamaruzzaman (2023) Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 325-340.. ISBN 978-981-19-4425-3

Sakinah, Hisham and K., Kadirgama and Mohammed, Hussein A. and Kumar, Amit and D., Ramasamy and Mahendran, Samykano and Rahman, Saidur (2020) Hybrid nanocellulose-copper (II) oxide as engine oil additives for tribological behavior improvement. Molecules, 25 (13). pp. 1-16. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Sakinah, Hisham and Kadirgama, Kumaran and Alotaibi, Jasem Ghanem and Alajmi, Ayedh Eid and Ramasamy, Devarajan and Norazlianie, Sazali and Mohd Kamal, Kamarulzaman and Yusaf, T. and Samylingam, L. and Aslfattahi, Navid and Kok, Chee Kuang (2024) Enhancing stability and tribological applications using hybrid nanocellulose-copper (II) oxide (CNC-CuO) nanolubricant: An approach towards environmental sustainability. Tribology International, 194 (109506). pp. 1-15. ISSN 0301-679X. (Published)

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915. (Published)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Sakinah, Muhammad Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and R., Saidur (2020) Enhancement of Tribological Behaviour and Thermal Properties of Hybrid Nanocellulose/Copper (II) Oxide Nanolubricant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 47-54. ISSN 2289-7879. (Published)

Samykano, M. and Nagarajan, T. and Majdi, . and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM. , [Research Report: Research Report] (Unpublished)

Samykano, M. and Rahman, M. M. and Ramasamy, D. and Kadirgama, Kumaran and Noor, M. M. and Reza, M. S. and Harun, W. S W and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system. , [Research Report: Research Report] (Unpublished)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Liew, Kia Wai and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . and Sivaraos, Subramaniam (2024) Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 1-18. ISSN 2756-8210. (Published)

Samylingam, Lingenthiran and Aslfattahi, Navid and Kok, Chee Kuang and Kadirgama, Kumaran and Norazlianie, Sazali and Schmirler, Michal and Ramasamy, Devarajan and Wan Sharuzi, Wan Harun and Samykano, Mahendran and Veerendra, A. S. and Semin, . (2024) Green Engineering with Nanofluids: Elevating Energy Efficiency and Sustainability. Journal of Advanced Research in Micro and Nano Engineering, 16 (1). pp. 19-34. ISSN 2756-8210. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)

Subramonian, Sivarao and Kadirgama, Kumaran and Mahdi Al-Obaidi, Abdulkareem Sh. and Mohd Shukor, Mohd Salleh and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan (2023) Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts. Engineering, Technology & Applied Science Research, 13 (5). pp. 11677-11684. ISSN 1792-8036. (Published)

Syazwan Izharuddin, Mohamad Sabri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Sharuzi, Wan Harun and K., Kadirgama and D., Ramasamy (2023) Investigation on water quality for farmed aquatic species by IoT monitoring system. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 317-327. ISSN 2462-1943. (Published)

T

Talal, Yusaf and Louis, Fernandes and Abd Rahim, Abu Talib and Yazan S. M., Altarazi and Waleed, Alrefae and Kadirgama, Kumaran and Ramasamy, Devarajan and Jayasuriya, Aruna and Brown, Gordon and Rizalman, Mamat and Hayder, Al Dhahad and Benedict, F. and Mohamd, Laimon (2022) Sustainable aviation—hydrogen is the future. Sustainability (Switzerland), 14 (1). pp. 1-17. ISSN 2071-1050. (Published)

Talal, Yusaf and Mohamd, Laimon and Waleed, Alrefae and Kadirgama, Kumaran and Hayder A., Dhahad and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Belal, Yousif (2022) Hydrogen energy demand growth prediction and assessment (2021–2050) using a system thinking and system dynamics approach. Applied Sciences (Switzerland), 12 (2). pp. 1-16. ISSN 2076-3417. (Published)

U

Urmi, Wajiha Tasnim and M. M., Rahman and Azmi, W. H. and K., Kadirgama and D., Ramasamy and Maleque, M. A. (2020) Experimental Investigation on the Stability of 40% Ethylene Glycol Based TiO2-Al2O3 Hybrid Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879. (Published)

W

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and Ali, M. Y. (2023) Exploring surfactant-enhanced stability and thermophysical characteristics of water-ethylene glycol-based Al2O3-TiO2 hybrid nanofluids. WSEAS Transactions on Heat and Mass Transfer, 18. 195 -206. ISSN 2224-3461. (Published)

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Md Abdul, Maleque (2020) An overview on synthesis, stability, opportunities and challenges of nanofluids. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 30-37., 41 (168124). ISSN 2214-7853

Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, R. and Norazlianie, Sazali (2023) A route to a high-impact journal article: The most functional strategy in modern history. Penerbit UMPSA, Pahang. ISBN 978-967-2831-95-2

Y

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanofluids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and K. V., Sharma (2016) Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant. The International Journal of Advanced Manufacturing Technology, 82 (1). pp. 327-340. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Yusaf, Talal and Mahamude, Abu Shadate Faisal and Farhana, Kaniz and Wan Sharuzi, Wan Harun and Kadirgama, Kumaran and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Subramonian, Sivarao and Hall, Steve and Dhahad, Hayder Abed (2022) A comprehensive review on graphene nanoparticles : Preparation, properties, and applications. Sustainability (Switzerland), 14 (12336). pp. 1-32. ISSN 2071-1050. (Published)

Yusaf, Talal F. and Faisal Mahamude, Abu Shadate and Kadirgama, Kumaran and Ramasamy, Devarajan and Farhana, Kaniz and A Dhahad, Hayder Abed and Abd Rahim, Abu Talib (2024) Sustainable hydrogen energy in aviation-A narrative review. International Journal of Hydrogen Energy, 52. pp. 1026-1045. ISSN 0360-3199. (Published)

Yusaf, Talal F. and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Ramasamy, Devarajan and Kadirgama, Kumaran and Samykano, Mahendran and Subramaniam, Sivaraos (2022) Physical-chemical properties modification of hermetia illucens larvae oil and diesel fuel for the internal combustion engines application. Energies, 15 (8073). pp. 1-17. ISSN 1996-1073. (Published)

Yuvan, Ramadhas and Devarajan, Ramasamy (2021) Combustion monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..