Browse by Journal Title

Shinde, Dinesh and Mistry, K. N. and Jhavar, Suyog and Pathak, Sunil (2018) A Review on Non-Asbestos Friction Materials: Material Composition and Manufacturing. Advanced Materials Research, 1150. pp. 22-42. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norazlina, H. and Kamala, Retenam and Santhoshini, Somderam and Kamal, Yusoh (2016) Effect of processing method on thermal behavior in PLA/PEG melt blending. Advanced Materials Research, 1134. pp. 185-190. ISSN 1662-8985. (Published)

S. A., Che Ghani and Abdul Malek, Nor Mohd Syamsi and W. S., Wan Harun and Adnan, Zahrul and M. F. F., Ab Rashid and Ramli, Mohd Hazlen and Omar, Asnawi (2016) Finite Element Analysis of Porous Medical Grade Cobalt Chromium Alloy Structures Produced by Selective Laser Melting. Advanced Materials Research, 1133. pp. 113-118. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zahrul Adnan, Mat Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and Mohd Asnawi, Omar and Hazlen, Ramli (2016) Dimensional Accuracy Study of Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. Advanced Materials Research, 1133. pp. 280-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Effect of Immersion Coating Deposition Time on Solder Joint Properties. Advanced Materials Research, 1133. pp. 361-365. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norhayati, Abdullah and Cormack, Peter A. G. (2016) Non-Aqueous Dispersion (NAD) Polymerisation-Based Synthetic Route to Hypercrosslinked Polymer with High Specific Surface Areas. Advanced Materials Research, 1134. pp. 198-202. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ali, Gomaa A. M. and Fouad, Osama A. and S. A., Makhlouf and M. M., Yusoff and K. F., Chong (2016) Optical and Electrochemical Properties of Co3O4/SiO2 Nanocomposite. Advanced Materials Research, 1133. pp. 447-451. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. R. M., Rejab and N. Z. M., Zaid and J. P., Siregar and Bachtiar, Dandi (2016) Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels. Advanced Materials Research, 1133. pp. 241-245. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ali, Gomaa A. M. and M. M., Yusoff and K. F., Chong (2015) Electrochemical Properties of Electrodeposited MnO2 Nanoparticles. Advanced Materials Research, 1113. pp. 550-553. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Faris, Mustafa and Noor Asma Fazli, Abdul Samad and Kamarul, Asri Ibrahim and Norzana, Ibrahim and Mohd Kamaruddin, Abd Hamid (2015) Energy efficient distillation columns design for retrofit NGLs fractionation process. Advanced Materials Research, 1113. pp. 667-673. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nurulasma, Zainudin and M. M., Yusoff and K. F., Chong (2015) Flow Injection Analysis Nitrite Sensor Based on Reduced Graphene Oxide Modified Electrode. Advanced Materials Research, 1113. pp. 411-416. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nurul Ain , Jalanni and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2015) New Polyester Nanofiltration (NF) Membrane for Humic Acid Removal. Advanced Materials Research, 1107. pp. 383-388. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Noor Ashila, Ramle and Syarifah, Abd Rahim and El-Hadad, Omar and Nornizar, Anuar (2015) Solubility of Carbamazepine-Succinic Co-Crystal in Ethanolic Solvent System. Advanced Materials Research, 1113. pp. 434-439. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hegde, Gurumurthy and M. M., Yusoff and Sidharth, S. N. and Yuvaraj, A. R. and Hui, Tai Joo and Sarojini, B. K. (2014) Light Induced Properties of Chalcones Correlated with Molecular Structure and Photophysical Properties for Permanent Optical Storage Device. Advanced Materials Research, 1033-1. pp. 1149-1153. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Q. Z., Mehdi and Hegde, Gurumurthy and Mohamad Ashry, Jusoh and Al-Dabbagh, Jinan B. and Ahmed, Naser Mahmoud (2014) Improving the Structural, Optical and Electrical Properties of ITO Nano-Layered Thin Films by Gas Flow Argon. Advanced Materials Research, 974. pp. 116-120. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Suraya, Sulaiman and Shamsuddin, Sulaiman and Munira, Ali and Fazilah, Adbul Aziz (2014) Effect of TiC Particulates on the Microstructure and Mechanical Properties of Aluminium-Based Metal Matrix Composite. Advanced Materials Research, 903. pp. 145-150. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Suraya, Sulaiman and Shamsuddin, Sulaiman and Nur Najmiyah, Jaafar and Nor Imrah, Yusoff (2014) Studies on Tensile Properties of Titanium Carbide (TiC) Particulates Composites. Advanced Materials Research, 903. pp. 151-156. ISSN 1022-6680 (print), 1662-8985 (online). (Unpublished) (Unpublished)

Hegde, Gurumurthy and Alla, Rasha Ata and Asman, D. Chambers and M. M., Yusoff and Matharu, A. S. and Komitov, Lachezar (2014) Photoalignment Studies on Azo Containing Thiophene Based Acrylates. Advanced Materials Research, 895. pp. 125-129. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Noraini, Mohd Razali and Iskandar, Ismed (2014) Multi-Mode Failure Models for Attribute Test Data in Reliability Systems, a Bayesian Analysis Approach Using Multi-Nomial Distribution Model. Advanced Materials Research, 903. pp. 419-424. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mas Ayu, Hassan and Engku Mohammad, Nazim and Sudin, Izman and Ourdjini, Ali and Tuty, Abu Bakar (2014) Adhesion Strength of HFCVD Diamond Coating on WC Substrate Seeded with Diamond and Different Ratios of SiC Powders. Advanced Materials Research, 845. pp. 467-471. ISSN 1662-8985. (Published)

Ismail, Mohd Khairuddin and Anwar, P. P. Abdul Majeed and Ann, Lim and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar (2014) Altitude and Attitude Control of a Trirotor UAV. Advanced Materials Research, 903. pp. 309-314. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali and M. R., Islam (2014) Analysis of an Air Borne Acoustic Signatures from Welding Process Using Empirical Mode Decomposition. Advanced Materials Research, 889 (890). pp. 770-775. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ali, Eman N. (2014) Biosorption of Cd(II) from Water by Moringa Oleifera Leaves. Advanced Materials Research, 925. pp. 223-227. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff (2014) Bouc-Wen Model Parameter Identification for a MR Fluid Damper Using Particle Swarm Optimization. Advanced Materials Research, 903. pp. 279-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abu Hannifa, Abdullah and Kamal, Yusoh and Mohamad Faiz, Mohamed Yatim and Siti Amirah, Nor Effendi and Wan Siti Noorhashimah, Wan Kamaruzaman (2014) Characterization Copper (II) Chloride Modified Montmorillonite filled PLA Nanocomposites. Advanced Materials Research, 858. pp. 13-18. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Fazilah, Abdul Aziz and Nur Najmiah, Jaafar and Suraya, Sulaiman (2014) Critical Success Factors of New Product Development and Impact on Performance of Malaysian Automotive Industry. Advanced Materials Research, 903. pp. 431-437. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Astuty, Amrin (2014) Effect Of Solder Volume on Interfacial Reaction Between SAC405 Solders and EN(B)EPIG Surface Finish. Advanced Materials Research, 845. pp. 76-80. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya (2014) The Effect of Nanoparticles of Ordinary Portland Cement (OPC) on Compressive Strength of Concrete. Advanced Materials Research, 894. pp. 342-348. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Zairulnizam, Mohd Zawawi and Nik Mohd Hafiz Aiman, Nik Haron (2014) Effect of Process Parameters in Hot Press Forming Operation to Tensile Strength of Ultra High Strength Steel. Advanced Materials Research, 974. pp. 179-182. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and Chua, Pei Shan and Nabila Shahilla, Rajagopal (2014) Effect of Seashell Powder on Flexural and Compressive Strength of Cement Mortar in Early Age. Advanced Materials Research, 894. pp. 65-69. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zainal Ariffin, Selamat and A. R., Yusoff and M. M., Rahman (2014) The Effect of Various Diameters Orifice Nozzle Coolant on Surface Roughness Performance in CNC Turning. Advanced Materials Research, 903. pp. 169-173. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Pourjavaheri, Firoozeh and Mohaddes, Farzad and Shanks, Robert A. and Czajka, Michael and Gupta, Arun (2014) Effects of Different Purification Methods on Chicken Feather Keratin. Advanced Materials Research, 941-94. pp. 1184-1187. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mebrahitom, A. and Azmir, Azhari (2014) Examination of Machining Parameters on the Surface Roughness of Stavax ESR Materials using EDM. Advanced Materials Research, 1133. pp. 339-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Rahaman, Mohammad Lutfar and Chowdhury, M. A. (2014) Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding Against Different Counterface Materials. Advanced Materials Research, 903. pp. 90-95. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, Mohammad Lutfar (2014) Frictional Characteristics of Steel Materials Sliding against Mild Steel. Advanced Materials Research, 903. pp. 33-38. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nuraini, Aziz and S. N., Aqida (2014) Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE). Advanced Materials Research, 1024. pp. 243-246. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Rosdi, Daud and Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and A., Shah and Mohd Faiz, Mohd Yusoff and M. W., Shamsiah and T. M., Yong and T., Kamarul (2014) Influence of Carbon Concentrations in Reducing Co and Cr Ions Release in Cobalt Based Implant: A Preliminary Report. Advanced Materials Research, 845. pp. 462-466. ISSN 1662-8985. (Published)

Nur Azhani, Abd Razak and Asmara, Y. P. and Mohamad Khairuazlan, Kamaruzaman (2014) Influences of H2SO4 and NaCl Concentrations on Stress Corrosion Cracking of AISI 304 Stainless Steel. Advanced Materials Research, 893. pp. 410-414. ISSN 1662-8985. (Published)

Mohd Zairulnizam, Mohd Zawawi and Mohd Ali Hanafiah, Shaharudin and Ahmad Rosli, Abdul Manaf (2014) Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine. Advanced Materials Research, 903. pp. 194-199. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and Kok, Jun Jie and Lim, Yeng Ping (2014) An Investigation on Effect of Oil Palm Shell Ash on Flexural Strength and Compressive Strength of Cement Mortar. Advanced Materials Research, 894. pp. 55-59. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ismail, Mohd Khairuddin and Anwar, P. P. A. Majeed and Abdul Aziz, Jaafar and Jessnor Arif, Mat Jizat (2014) Modeling and PID Control of a Quadrotor Aerial Robot. Advanced Materials Research, 903. pp. 327-331. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Ismail, Mohd Khairuddin and Amira Sarayati, Ahmad Dahalan and Amar Faiz, Zainal Abidin and Yee, Yang Lai and Nur Anis, Nordin and Siti Fatimah, Sulaiman and Hazriq Izzuan, Jaafar and Syahrul Hisham, Mohamad and Noor Hafizah, Amer (2014) Modeling and Simulation of Swarm Intelligence Algorithms for Parameters Tuning of PID Controller in Industrial Couple Tank System. Advanced Materials Research, 903. pp. 321-326. ISSN 1662-8985. (Published)

Abdullah, Bawadi and Vo, Dai-Viet N. and Chowdhury, Sujan (2014) Modeling the Effect of Temperature-induced Surface Tension Gradient in Coating Processes. Advanced Materials Research, 917. pp. 181-188. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Namdar, Abdoullah and Ideris, Zakaria and Pelko, Azam Khodashenas and Nurmunira, Muhammad (2014) Natural Mineral for Improving Concrete Compressive Strength. Advanced Materials Research, 875-87. pp. 1490-1494. ISSN 1662-8985. (Published)

Fazliana, Fauzun and S. N., Aqida and Md Saidin, Wahab (2014) Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties. Advanced Materials Research, 1024. pp. 215-218. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)

Anwar, P. P. Abdul Majeed and Siti Hajar, Mohd Yusop and Mohd Nor Azmi, Ab Patar and Jamaluddin, Mahmud (2014) A Parametric Investigation on the Neo-Hookean Material Constant. Advanced Materials Research, 915-916. pp. 853-857. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Fakharuddin, Azhar and Irfan, Ahmed and Qamar, Wali and Zulkeflee, Kalidin and M. M., Yusoff and Rajan, Jose (2014) Probing Electron Lifetime and Recombination Dynamics in Large Area Dye-Sensitized Solar Cells by Electrochemical Impedance Spectroscopy. Advanced Materials Research, 925. pp. 553-558. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. R., Yusoff and Mohamad Syahmi, Shahrom (2014) Review of Aluminum Chip Machining Using Direct Recycling Process. Advanced Materials Research, 903. pp. 157-162. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Munira, Ali and Nur Najmiyah, Jaafar and Fazilah, Abdul Aziz and Nooraizedfiza, Zainon (2014) Review on Non Uniform Rational B-Spline (NURBS)Concept and Optimization. Advanced Materials Research, 903. pp. 338-343. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Syamsul, Abdullah and Z., Man and L., Ismail and M. I., Abdul Mutalib and M. A., Bustam (2014) Solubility Parameters based on Refractive Index Data of Ionic Liquid. Advanced Materials Research, 917. pp. 45-55. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Study on Potential Waste Insulating Material Properties in Water for Thermal Storage Application. Advanced Materials Research, 903. pp. 139-144. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Abdoullah, Namdar and Fadzil, Mat Yahaya and M. M., Yusoff (2014) Using High Temperature for Improve Compressive Strength of Ordinary Portland Cement Paste (OPC) – A New Approach. Advanced Materials Research, 894. pp. 70-76. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Anwar, P. P. Abdul Majeed and Abdul Aziz, Jaafar and Sapuan, S. M. and Shahnor, Basri (2014) Velocity Measurements Using High-Speed Imaging System for Impact Test. Advanced Materials Research, 903. pp. 187-193. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohamad Syahmi, Shahrom and A. R., Yusoff and Mohd Amri, Lajis (2013) Taguchi Method Approach for Recyling Chip Waste from Machining Aluminum (AA6061) Using Hot Press Forging Process. Advanced Materials Research, 845. pp. 637-641. ISSN 1022-6680, ESSN: 1662-8985. (Published)

Zahari, Taha and Aris, Mohd Azri and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Nina Nadia, Sahim (2013) A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Advanced Materials Research. ISSN 1022-6680. (Published)

Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi and Nik Zuraida, Imran Adly (2013) Thin Walled Part Warping Overcoming by Honeycomb Ribs Design. Advanced Materials Research, 903. pp. 181-186. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norul Wahida, Kamaruzaman and Khairunisa, Muthusamy (2012) Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate. Advanced Materials Research, 626. pp. 839-843. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. M., Yusoff and Rajan, Jose and Archana, Panikar Sathyaseelan and Viet, Anh Le and Bao, Qiao Liang and Loh, Kian Ping and Anil Kumar, Gopinathan Nair M. and Ramakrishna, Seeram (2012) Functional Films of Polymer-Nanocomposites by Electrospinning for Advanced Electronics, Clean Energy Conversion, and Storage. Advanced Materials Research, 545. pp. 21-26. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini (2012) Effect of Nickel Doping on Interfacial Reaction between Lead-free Solder and Ni-P Substrate. Advanced Materials Research, 488-48. pp. 1375-1379. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Norida, Ridzuan and Muhammad Hidayat, Musa (2012) Comparison Between Treated and Untreated Zeolite Towards the Performance of Polyethersulfone Mixed Matrix Membranes (MMMs) for O2/N2 Gas Separation. Advanced Materials Research, 550-55. pp. 728-735. ISSN 1022-6680. (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Azmah Hanim, Mohamad Ariff (2012) Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish. Advanced Materials Research, 415-417. pp. 1181-1185. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

S., Izman and M. A., Hassan and Mas Ayu, Hassan and Mohammed Rafiq, Abdul Kadir and Mohammed Ruslan, Abdullah and Mahmood, Anwar and A., Shah and R., Daud (2012) Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy. Advanced Materials Research, 399-401. pp. 1564-1567. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hartini, Mustafa and A. R., Yusoff and M. Yusoff, Ismail (2012) Productivity study and line balancing of GGMG & CALICO production line. Advanced Materials Research, 576. pp. 700-704. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nasly, Mohamed Ali and Nima, Amani and Roslida, Abdul Samat (2011) Developing a Framework of Economic Model for Building Component Lifecycle Repair. Advanced Materials Research, 255-26. pp. 3893-3897. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680. (Published)

Zahari, Taha and Tai, Vin Cent and See, Phen Chiak (2011) Design and manufacture of a miniature UAV using 3D rapid prototyping. Advanced Materials Research, 308-310. pp. 1426-1435. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Samykano, Mahendran and Fazli, Ismail and Chander, Sawalingam Thinesh (2011) Development of micro EDM with directly mounted APA 400MML actuator. Advanced Materials Research, 314-316. pp. 1811-1817. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680. (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680. (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26. pp. 949-955. ISSN 1022-6680. (Published)

Zamzuri, Hamedon and Mon, Thet Thet and S., Sharif and Venkatesh, V. C. and A. R. M., Masri and Sue-Rynley, Anak Emley (2011) Performance of nitrogen gas as a coolant in machining of titanium. Advanced Materials Research, 264-265. pp. 962-966. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680. (Published)

Darestani, S. Avakh and M. Y., Ismail and N., Ismail and R. M., Yusuff (2011) A material and product audit method for determining the level of quality. Advanced Materials Research, 264-265. pp. 1714-1718. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

K., Kadirgama and M. M., Noor and B., Mohammad and H. H., Habeeb (2010) Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS. Advanced Materials Research, 83-86 . pp. 295-302. ISSN 1022-6680. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680. (Published)

Chin, Siew Choo and Shafiq, Nasir and Kusbiantoro, Andri and Nuruddin, Muhd Fadhil Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review. Advanced Materials Research. (In Press / Online First) (In Press / Online First)