Browse by Journal Title

Wan Ahmad, Saffuan and Khairunisa, Muthusamy and Hashim, Mohd Hanafi and Yaacob, Maizatil Akma (2017) Properties of Concrete Containing Unground Palm Oil Fuel Ash as Partial Sand Replacement. Applied Mechanics and Materials, 864. pp. 278-283. ISSN 1662-7482. (Published)

Mahmood, Anwar and S., Izman and Mohammed Rafiq, Abdul Kadir and E. M., Nazim and Aini, Abdul Kadir and M., Konneh and Mas Ayu, Hassan (2016) Elemental Diffusion Behaviour of Biomedical Grade Titanium Alloy through Thermal Oxidation. Applied Mechanics and Materials, 819. pp. 591-595. ISSN 1662-7482. (Published)

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Suhaimi, Hasan (2016) Numerical Analysis of Experimental Turbulent Forced Convection Heat Transfer for Nanofluid Flow in a Tube. Applied Mechanics and Materials, 819. pp. 132-141. ISSN 1662-7482. (Published)

Abdulbari, Hayder A. and Basheer, Esmail Abdullah Mohammed and Ainoon, Shabirin and Wafaa, Kamil Mahmood (2015) Investigating the Degradation Resistance Improvement of Polymer Surfactant Complex Drag Reducing Agent. Applied Mechanics and Materials, 789-790. pp. 7-14. ISSN 1662-7482. (Published)

Izzuddin, Zaman and Abdurasad, M. R. and Manshoor, B. and Khalid, A. and M. S. M., Sani (2015) Study on Dynamic Behaviour of Grass Trimmer Using Finite Element Analysis. Applied Mechanics and Materials, 786. pp. 383-387. ISSN 1662-7482. (Published)

Saffuan, Wan Ahmad and Azlan, Adnan and Rozaimi, Mohd Noor and Khairunisa, Muthusamy and Sk Muiz, Sk Razak and Awang, Taib and Muhd Zulham Affandi, Mohd Zahid (2015) Attenuation Function Relationship for Far Field Earthquake Considered by Strike Slip Mechanism. Applied Mechanics and Materials, 754. pp. 897-901. ISSN 1662-7482. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri and Iqbal, Mohd Haniffa and Noor Nabilah, Sarbini and Fadzil, Mat Yahaya (2015) Acid Resistance of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash. Applied Mechanics and Materials, 754. pp. 326-330. ISSN 1662-7482. (Published)

Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2015) Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF). Applied Mechanics and Materials, 773 (774). pp. 600-604. ISSN 1662-7482. (Published)

Hiew, Thong yap and Ngien, S. K. (2015) Analysis of Flow Characteristics in Sewerage System. Applied Mechanics and Materials, 802. pp. 599-604. ISSN 1662-7482. (Published)

Zuriani, Mustaffa and M. H., Sulaiman and Yuhani, Yusof (2015) An Application of Grey Wolf Optimizer for Commodity Price Forecasting. Applied Mechanics and Materials, 785. pp. 473-478. ISSN 1662-7482. (Published)

S. J., Teoh and R. A., Bakar and Gan, Leong Ming and Mustika, Yasti (2015) Conceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric Motorcycle. Applied Mechanics and Materials, 699. pp. 1-8. ISSN 1662-7482. (Published)

Nor Rul Hasma, Abdullah and Mahaletchumi, Morgan and Ismail, Musirin (2015) Constrained Reactive Power Control (CRPC) Based Multi-Objective Optimization under Multi-Contingencies (N-m). Applied Mechanics and Materials, 785. pp. 414-418. ISSN 1662-7482. (Published)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Tanti Zanariah, Shamshir Ali and Billy, Anak Sup (2015) Design and Stress Simulation of Crankshaft for Slider Crank-Drive Stirling Engine. Applied Mechanics and Materials, 699. pp. 678-683. ISSN 1662-7482. (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482. (Published)

Mathivanan, D. B. and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Tezara, C. (2015) Effect of Fibre Loading on the Flexural Properties of Natural Fibre Reinforced Polymer Composites. Applied Mechanics and Materials, 695. pp. 1-4. ISSN 1662-7482. (Published)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2015) Effect of Shear Rate on Characteristics, Performance and Morphology of Polysulfone Blend Membranes. Applied Mechanics and Materials, 699. pp. 305-310. ISSN 1662-7482. (Published)

Nur Atiqah, Ramlan and Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and R., Mamat (2015) Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 425-429. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Mohd Hafiz, Ali (2015) Fundamental Study of Dual Fuel on Exhaust Gas Recirculation (EGR) Operating with a Diesel Engine. Applied Mechanics and Materials, 773. pp. 415-419. ISSN 1662-7482. (Published)

N. M. Zuki, N. M. and Mohd Kamal, Mohd Nawawi and Adam Shariff Adli, Aminuddin (2015) Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management. Applied Mechanics and Materials, 752/53. pp. 1333-1338. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482. (Published)

Hadi, Manap and Lewis, Elfed (2015) The Interference Study of Green-House Gases for an Ammonia Sensor. Applied Mechanics and Materials, 704. pp. 244-247. ISSN 1662-7482. (Published)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection in Gas Pipeline using Hilbert-Huang Transform. Applied Mechanics and Materials, 815. pp. 403-407. ISSN 1662-7482. (Published)

Intan Suhana, Mohd Razelan and H., Hussain and T. H., Law and Ahmad Farhan, Md. Shokeri (2015) Locating Problematic Road Sections: Comparisons between Crash Data and Composite Index Method. Applied Mechanics and Materials, 802. pp. 345-350. ISSN 1662-7482. (Published)

R. A., Bakar and Ammar Alfaiz, M. A. and Musthafah, M. T. and M. Shahir, Ali and Abdul, Muhaimin (2015) New Design of a Low Cost Small Engine Dynamometer for Engine Testing. Applied Mechanics and Materials, 699. pp. 642-647. ISSN 1662-7482. (Published)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482. (Published)

Lo, Ing Wong and M. H., Sulaiman and Mohd Rusllim, Mohamed (2015) Solving Economic Dispatch Problems with Practical Constraints Utilizing Grey Wolf Optimizer. Applied Mechanics and Materials, 785. pp. 511-515. ISSN 1662-7482. (Published)

Nur Fauziah, Jaharudin and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and R., Mamat (2015) Study on Particulate Matter of Diesel Engine Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 420-424. ISSN 1662-7482. (Published)

Mohd Haizal, Mohd Husin and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and Jin Lin, Li (2015) Synthesis and Characteristics of Mesoporous SBA-15 Influence by HMTA as an Internal pH Modifier. Applied Mechanics and Materials, 761. pp. 473-478. ISSN 1662-7482. (Published)

Siregar, J. P. and Cionita, Tezara and Bachtiar, Dandi and M. R. M., Rejab (2015) Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482. (Published)

D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482. (Published)

N. M., Razali (2014) Process Sequencing Modeled as TSP with Precedence Constraints - A Genetic Algorithm Approach. Applied Mechanics and Materials, 575. pp. 843-847. ISSN 1662-7482. (Published)

Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Diesel Engine Performance Fueled with Waste Cooking Oil. Applied Mechanics and Materials, 465-46. pp. 418-422. ISSN 1662-7482. (Published)

Amir, Khalid and M. D., Anuar and M. Farid, Sies and B., Manshoor and Izzuddin, Zaman and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Mixture Formation and Flame Development in Biodiesel Burner Combustion Using Direct Optical Visualization Technique. Applied Mechanics and Materials, 663. pp. 8-12. ISSN 1662-7482. (Published)

Mohd Azhar, Sahwan and Mohd Nizam A., Rahman and Baba, M. Deros (2014) Case Studies on the Implementation of Lean Manufacturing in the Automotive Malaysian Companies. Applied Mechanics and Materials, 465-46. pp. 1180-1184. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Characterization of Blended Biodiesel Fuel Properties with Small Portion of Butanol as a Fuel Additive. Applied Mechanics and Materials, 465-46. pp. 137-141. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482. (Published)

Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah and Amir, Aziz (2014) Comparative Study of Particulate Matter (PM) Emissions in Diesel Engine Using Diesel-Methanol Blends. Applied Mechanics and Materials, 465-46. pp. 1255-1261. ISSN 1662-7482. (Published)

Faiz, Mohd Turan and Badrul, Omar (2014) Design Evaluation Method for Design Engineer in Manufacturing Industries using Integrated Rough-Grey Analysis Approach. Applied Mechanics and Materials, 660. pp. 1052-1056. ISSN 1662-7482. (Published)

Asmadi, Ali and R. M., Yunus and Mohamad, Awang and Anwar, Johari and Ramli, Mat (2014) Effect of Cellulose Acetate Phthalate (CAP) on Characteristics and Morphology of Polysulfone/Cellulose Acetate Phthalate (PSf/CAP) Blend Membranes. Applied Mechanics and Materials, 493. pp. 640-644. ISSN 1662-7482. (Published)

Latiff, M. I. A. and Jamaludin, S. N. S. and Basri, S. and Hussain, A. and Alothmany, D. S. and Mustapha, F. and Nuruzzaman, D. M. and Ismail, N. M. and Ismail, I. (2014) Effect of Sintering Temperature on Functionally Graded Nickel/Alumina Plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Amir, Aziz and Asraf, Jusoh and R., Mamat and Abdul Adam, Abdullah (2014) Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel. Applied Mechanics and Materials, 465 (466). pp. 191-195. ISSN 1662-7482. (Published)

Muhammad Ihsan, Abdul Latiff and Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Ahmad, Hussain and Dheya, Shuja Alothmany and Faizal, Mustapha and Nuruzzaman, D. M. and Noor Mazni, Ismail and Izwan, Ismail (2014) Effect of sintering temperature on functionally graded nickel/alumina plate. Applied Mechanics and Materials, 629. pp. 437-443. ISSN 1662-7482. (Published)

Rasidi, Ibrahim and Abdul Halim, Erween and S. A., Che Ghani and A. A., Ibrahim and N. A., Maskam (2014) The Effect on the Application of Coolant and Ultrasonic Vibration Assisted Micro Milling on Machining Performance. Applied Mechanics and Materials, 660. pp. 65-69. ISSN 1662-7482. (Published)

Mahendran, Moorthy and Tanti Zanariah, Shamshir Ali and Shahrani, Anuar and R. A., Bakar (2014) The Efficiency Enhancement on the Direct Flow Evacuated Tube Solar Collector Using Water-Based Titanium Oxide Nanofluids. Applied Mechanics and Materials, 465-46. pp. 308-315. ISSN 1662-7482. (Published)

Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Juliawati, Alias (2014) Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas. Applied Mechanics and Materials, 695. pp. 98-101. ISSN 1662-7482. (Published)

Beg, M. D. H. and Gupta, Arun (2014) An Empirical Approach for Prediction of Natural Fiber Reinforced Polypropylene Composite Properties. Applied Mechanics and Materials, 534. pp. 69-73. ISSN 1662-7482. (Published)

Salwani, Mohd Salleh and B. B., Sahari and A., Ali and A. A., Nuraini (2014) Energy Absorption of Partially Filled Side Member Subjected to Oblique Crash. Applied Mechanics and Materials, 564. pp. 38-41. ISSN 1662-7482. (Published)

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim and Reddy, Baridula Ravinder (2014) Evaluating the Strength of the Friction Stir Welded Joints at Various Rotational Speeds. Applied Mechanics and Materials, 446 - . pp. 312-315. ISSN 1662-7482. (Published)

Abdullah, Bawadi and Vo, Dai-Viet N. (2014) An Evaluation of Fish Scales as Potential Adsorbents:pH and Concentration Effect. Applied Mechanics and Materials, 625. pp. 73-76. (Published)

Amir, Aziz and Wong, Chung Siong and R., Mamat and Hagos, F. Y. (2014) Exhaust Emissions Reduction Of Diesel Engine Fueled With Emulsified Palm Oil Methyl Esters. Applied Mechanics and Materials, 660. pp. 457-461. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Mutalib, Leman and Amir, Khalid and Noreffendy, Tamaldin (2014) Experimental Investigation on Biodiesel-Ethanol-Diesel Blends Operating with a Diesel Engine. Applied Mechanics and Materials, 465-46. pp. 221-225. ISSN 1662-7482. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An Experimental Study of Heat Transfer and Friction Factor Characteristics of Finned Flat Tube Banks with In-Line Tubes Configurations. Applied Mechanics and Materials, 564. pp. 197-203. ISSN 1662-7482. (Published)

Billy, Anak Sup and Tanti Zanariah, Shamshir Ali and Mohd Farid, Zainudin and R. A., Bakar (2014) Experimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate Collector. Applied Mechanics and Materials, 660. pp. 709-713. ISSN 1662-7482. (Published)

Hamid, Yusoff and M. Z., Abdullah and Kamarul Arifin, Ahmad and M. K., Abdullah and Shafiq, Suhaimi (2014) Experimental Study on the Effect of Skin Flexibility on Aerodynamic Performance of Flapping Wings for Micro Air Vehicles. Applied Mechanics and Materials, 629. pp. 18-23. ISSN 1662-7482. (Published)

M. R. M., Akramin and Ahmad Kamal, Ariffin and Kikuchi, Masanori and S., Abdullah and N., Nik Abdullah (2014) Fatigue Crack Growth Analysis of Semielliptical Surface Crack. Applied Mechanics and Materials, 471. pp. 293-298. ISSN 1662-7482. (Published)

Mohd Azam, Musa and A. R., Razali and Nazrul Idzham, Kasim (2014) Grain and Feature Size Effect on Material Behavior for Micro-Sheet-Forming. Applied Mechanics and Materials, 680. pp. 77-80. ISSN 1662-7482. (Published)

Rosmazi, Rosli and Musa, Mailah and Priyandoko, Gigih (2014) Hardware-in-the-Loop Simulation for Active Force Control with Iterative Learning Applied to an Active Vehicle Suspension System. Applied Mechanics and Materials, 465-46. pp. 801-805. ISSN 1662-7482. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Heat Transfer Performance of Titanium Oxide in Ethylene Glycol Based Nanofluids under Transition Flow. Applied Mechanics and Materials, 660. pp. 684-688. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Influence of 1-Butanol Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. Applied Mechanics and Materials, 465-46. pp. 130-136. ISSN 1662-7482. (Published)

Kusbiantoro, Andri and Norbaizurah, Rahman and Noor Fifinatasha, Shahedan (2014) Interrelationship Analysis of Geopolymer Components using Pearson Correlation Technique. Applied Mechanics and Materials, 567. pp. 417-421. ISSN 1662-7482. (Published)

Shafiq, Suhaimi and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Nik Rosli, Abdullah (2014) Investigation of Intake Flow Rate and Swirl Motion of Sl engine. Applied Mechanics and Materials, 465-46. pp. 409-417. ISSN 1662-7482. (Published)

Ghazirah, Mustapha and Wan Ruzaini, Wan Sulaiman and Anwar, P. P. Abdul Majeed and Nur Hayati, Mohd Yahya and Jamaluddin, Mahmud (2014) Kinematics and Efficacy Analysis of the Seni Silat Cekak Malaysia (Kaedah A). Applied Mechanics and Materials, 680. pp. 267-270. ISSN 1662-7482. (Published)

Noraziah, Ahmad and Ainul Azila, Che Fauzi and Wan Maseri, Wan Mohd and Mohd Azhar, Mohd Amer and Herawan, Tutut (2014) Managing Fragmented Database Replication for Mygrants Using Binary Vote Assignment on Cloud Quorum. Applied Mechanics and Materials, 490 - . pp. 1342-1346. ISSN 1662-7482. (Published)

Siregar, J. P. and Cionita, Tezara and Nor Mariah, Adam and Juliana, Jalaludin and Mariani, Mansor (2014) Measurement of Indoor Air Quality Parameters in Daycare Centres in Kuala Lumpur Malaysia. Applied Mechanics and Materials, 564. pp. 245-249. ISSN 1662-7482. (Published)

M. I., Rafiquel and M., Ishak (2014) Modelling and Optimizing of Joint’s Fracture Toughness between A7075-T651 and AZ31B Dissimilar Alloys Welded by GMA Spot Welding Method. Applied Mechanics and Materials, 663. pp. 281-286. ISSN 1662-7482. (Published)

Rahman, Abdul Haziq Abdul and Abdullah, Bawadi and Vo, Dai-Viet N. (2014) Modelling of Carbon Dioxide Leakage in Abandon Wells using Computational Fluid Dynamics. Applied Mechanics and Materials, 625. pp. 780-783. ISSN 1662-7482. (Published)

Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482. (Published)

Khairunisa, Muthusamy and Nur Azzimah, Zamri (2014) POFA: A Potential Partial Cement Replacement Material in Oil Palm Shell Lightweight Aggregate Concrete. Applied Mechanics and Materials, 567. pp. 446-450. ISSN 1662-7482. (Published)

M. H., Firdaus and A. R., Yusoff and Muhammad Hatifi, Mansor and Mohd Tarmizy, Che Kar (2014) Parametric Study of an Electromagnetic Energy Harvester. Applied Mechanics and Materials, 471. pp. 113-118. ISSN 1662-7482. (Published)

Nazrul Idzham, Kasim and A. R., Razali and Mohd Azam, Musa (2014) Positional Accuracy Based on a Load Identification Optimization on a Linear Motor Sheet Forming Feeder. Applied Mechanics and Materials, 680. pp. 311-314. ISSN 1662-7482. (Published)

N. M. M., Ammar and Nurul Suraya, Azahari and Ahmad Alif, Ahmad Adam (2014) Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine. Applied Mechanics and Materials, 465-46. pp. 552-556. ISSN 1662-7482. (Published)

Noraziah, Ahmad and Mohd Azhar, Mohd Amer and Abdalla, Ahmed N. and Ainul Azila, Che Fauzi (2014) Prediction of Vehicle Fuel Consumption Model Based on Artificial Neural Network. Applied Mechanics and Materials, 492. pp. 3-6. ISSN 1662-7482. (Published)

Anwar, P. P. Abdul Majeed and Asrul Khairi, Sohaimi and Jamaluddin, Mahmud (2014) Preliminary Numerical Analysis of a Platform Structure. Applied Mechanics and Materials, 680. pp. 280-283. ISSN 1662-7482. (Published)

Zulkifli, Ahmad@Manap and Ahmad Kamal, Ariffin and Mohd Akramin, Mohd Romlay (2014) Probabilistic Model of Surface Crack on the Lumbar Vertebra. Applied Mechanics and Materials, 471. pp. 299-305. ISSN 1662-7482. (Published)

Tan, Suat Hian and Nurul Ain, Ismail (2014) Process Optimization of L-Phenylalanine onto Porous Silica Nanoparticles. Applied Mechanics and Materials, 563. pp. 90-93. ISSN 1662-7482. (Published)

M. R. M., Rejab and W. A. W., Hassan and J. P., Siregar and Bachtiar, Dandi (2014) Specific Properties of Novel Two-Dimensional Square Honeycomb Composite Structures. Applied Mechanics and Materials, 695. pp. 694-698. ISSN 1662-7482. (Published)

Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2014) Study of Effect of Thermal Diffusivity on Ground Temperature for Malaysian Climate. Applied Mechanics and Materials, 554. pp. 301-306. ISSN 1662-7482. (Published)

Azhani, Zukri and Nadiatul Adilah, Ahmad Abdul Ghani (2014) A Study of Soil Stabilization by Hydrated Lime at Kampung Kedaik Asal, Rompin, Pahang, Malaysia. Applied Mechanics and Materials, 695. pp. 738-741. ISSN 1662-7482. (Published)

Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and R., Mamat and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah (2014) Study on Particulate Matter (PM) Emissions of Diesel Engine Using Palm Oil Methyl Ester. Applied Mechanics and Materials, 465 (466). pp. 433-437. ISSN 1662-7482. (Published)

Rahimah, Embong and Kusbiantoro, Andri (2014) Study on the Early Hydration of Cement Paste Containing Sodium Chloride. Applied Mechanics and Materials, 621. pp. 35-38. ISSN 1662-7482. (Published)

Fatchurrohman, Nanang and Ismed, Iskandar and Suraya, Sulaiman and Kartina, Johan (2014) Sustainable Analysis in the Product Development of Al-Metal Matrix Composites Automotive Component. Applied Mechanics and Materials, 695. pp. 32-35. ISSN 1662-7482. (Published)

Khan, Maksudur R. and Ong, Huei Ruey and Ridzuan, Ramli and R. M., Yunus (2014) Synthesis of Copper Nanoparticles at Room Temperature Using Hydrazine in Glycerol. Applied Mechanics and Materials, 481. pp. 21-26. ISSN 1662-7482. (Published)

Bachtiar, Dandi and Siregar, J. P. and Ahmad Shahrizan, Sulaiman and M. R. M., Rejab (2014) Tensile Properties of Hybrid Sugar Palm/Kenaf Fibre Reinforced Polypropylene Composites. Applied Mechanics and Materials, 695. pp. 155-158. ISSN 1662-7482. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Thermal Conductivity Enhancement of Aluminium Oxide Nanofluid in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 730-734. ISSN 1662-7482. (Published)

Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Mohd Imran, Yusof and Mohd Fadhlan, Yusof (2014) Utilization of the Acoustic Emission Technology in Bone Tissues. Applied Mechanics and Materials, 471. pp. 218-222. ISSN 1662-7482. (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2014) Viscosity of Aluminium Oxide (Al2O3) Nanoparticle Dispersed in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 735-739. ISSN 1662-7482. (Published)

Nur Azhani, Abd Razak and Wai, Loon Ng and Juliawati, Alias (2013) Effects of Mig Welding to Corrosion Behaviour of Carbon Steel. Applied Mechanics and Materials, 315. pp. 914-918. ISSN 1662-7482. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris (2013) The Efficacy of Impact-Absorbing Materials during Collision with a Soccer Ball. Applied Mechanics and Materials, 440. pp. 363-368. ISSN 1662-7482. (Published)

Juliawati, Alias and Nur Azhani, Abd Razak (2013) Hydrogen Embrittlement Susceptibility of Pipeline Steel. Applied Mechanics and Materials, 315. pp. 820-824. ISSN 1662-7482. (Published)

Obed M., Ali and R., Mamat (2013) Improving Engine Performance and Low Temperature Properties of Blended Palm Biodiesel Using Additives. A Review. Applied Mechanics and Materials, 315. pp. 68-72. ISSN 1662-7482. (Published)

Makeen, Mohd Amin and Abdul, Hadi and M. F., Ghazali (2013) Leakage Detection in Pipeline Using Synchrosqueeze Wavelet Transform. Applied Mechanics and Materials, 465-466. pp. 467-471. ISSN 1662-7482. (Published)

N. M. M., Ammar and Nasir, Ali and M. S., Idris and A. N., Oumer (2013) Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity. Applied Mechanics and Materials, 465-46. pp. 557-561. ISSN 1662-7482. (Published)

Mohd. Herzwan, Hamzah and Abdul Adam, Abdullah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2013) Performance of Diesel Engine Operating with Waste Plastic Disposal Fuel. Applied Mechanics and Materials, 465-46. pp. 423-427. ISSN 1662-7482. (Published)

Mohd Fakhrurrazi, Ishak and Nazli, Ali and Azman, Kassim (2012) Tree Induce Suction For Slope Sustainability. Applied Mechanics and Materials, 170-173. pp. 1334-1338. ISSN 1662-7482. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) A Comparison of Two Approaches for Collision Avoidance of an Automated Guided Vehicle Using Monocular Vision. Applied Mechanics and Materials, 145. pp. 547-551. ISSN 1662-7482. (Published)

Amir, Abdul Razak (2012) Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language. Applied Mechanics and Materials, 110 (111). pp. 4925-4931. ISSN 1662-7482. (Published)

H. A., Salaam and Zahari, Taha and Tuan Mohammad Yusoff, Tuan Ya (2012) Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining. Applied Mechanics and Materials, 217-219. pp. 2012-2015. ISSN 1662-7482. (Published)

Amani, Nima and Nasly, Mohamed Ali and Hosseini, Seyedmohsen (2011) Building component maintenance/ repair management: An economic analysis simulation. Applied Mechanics and Materials, 94-96. pp. 2134-2137. ISSN 1662-7482. (Published)

Thet, Thet Mon (2011) Performance of Cryogenic Machining with Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials, 52 (54). pp. 2003-2008. ISSN 1662-7482. (Published)