Browse by Journal Title

A

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M A, Male (2021) Comparison of missing rainfall data treatment analysis at Kenyir Lake. IOP Conference Series: Materials Science and Engineering, 1144. pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

A. A., Mohamed and E. J., Wei and Putra Jaya, Ramadhansyah and M. A., Farooqi and M. K. I. M., Satar and Nordiana, Mashros (2020) An Investigation on Urban Circle Rail Transit: A Case Study on the Alignment of Mass Rapid Transit 3 (Circle Line). In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012003). ISSN 1757-8981 (Print), 1757-899X (Online)

A, Syahir and M B, Mat Piah and Waleed, Alhadadi and F, Hafidzah and M S Z, Desa and M Z M, Noor and Muhammad Aliff Nazreen, Norazmi and A., Ramli (2020) Mechanical and thermal properties of polyurethane/neoprene/ graphene blends. IOP Conference Series: Materials Science and Engineering, 736 (052028). pp. 1-11. (Published)

Ab Rahim, M. F. and Jaafar, A. A. and Taha, Z. and Rizalman, Mamat (2020) Simulation study on the effect of fuel injection and air intake boundary setup on the brake torque response by using comprehensive vehicle model for natural gas vehicle (NGV). In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-10., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Alashwal, B Y and Gupta, Arun and Husain, M S B (2019) Characterization of dehydrated keratin protein extracted from chicken feather. IOP Conference Series: Materials Science and Engineering, 702 (012033). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Akindoyo, John Olabode and Beg, M. D. H. and Suriati, Ghazali and Oluwasoga, Akindoyo Edward and Nitthiyah, Jeyaratnam (2017) Synthesis of Hydroxyapatite through Ultrasound and Calcination Techniques. In: Mechanical Engineering, Science and Technology International Conference. IOP Conf. Series: Materials Science and Engineering , 19–20 April 2017 , Politeknik Metro, Johor Bahru, Malaysia. pp. 1-8., 203 (1). ISSN 1757-8981(print); 1757-899X(online)

Azmir, Azhari and S., Sulaiman and A. K., Prasada Rao (2016) A Review on the Application of Peening Processes for Surface Treatment. IOP Conference Series: Materials Science and Engineering, 114 (012002). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

A. S. A., Sani and F. J. P., Sousa and Zamzuri, Hamedon and Azmir, Azhari (2016) Contact Pressure Distribution During the Polishing Process of Ceramic Tiles: A Laboratory Investigation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-19., 114 (012008). ISSN 1757-8981 (Print), 1757-899X (Online)

Ahmad, Redza and Yasui, Toshiaki and Fukumoto, Masahiro (2016) Deposition of Hard Chrome Coating onto Heat Susceptible Substrates by Low Power Microwave Plasma Spray. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ahmad, Redza and Toshiki, Kondo and Toshiaki, Yasui and Masahiro, Fukumoto (2016) High Anatase Rate Titanium Dioxide Coating Deposition by Low Power Microwave Plasma Spray. IOP Conference Series: Materials Science and Engineering, 114 (012031). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) A Hybrid Fuzzy Model for Lean Product Development Performance Measurement. IOP Conference Series: Materials Science and Engineering, 114 (1). 012048. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Asmara, Y. P. and M. F., Ismail and L., Giok Chui (2016) Predicting Effects of Corrosion Erosion of High Strength Steel Pipelines Elbow on CO2-Acetic Acid (HAc) Solution. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2016) Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies. IOP Conference Series: Materials Science and Engineering, 114 (1). 012047. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Anwar, P. P. Abdul Majeed (2016) Sensors Fusion based Online Mapping and Features Extraction of Mobile Robot in the Road Following and Roundabout. In: IOP Conference Series: Materials Science and Engineering, 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12-14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

A. K. M., Moshiul Alam and Beg, M. D. H. and R. M., Yunus (2015) Influence of Carbon Nano Tubes on the Thermo-Mechanical Properties of Unsaturated Polyester Nanocomposite. IOP Conference Series: Materials Science and Engineering, 78. pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Asmara, Y. P. and Juliawati, Alias and Ahmad Shahrizan, Sulaiman and Jamiluddin, Jaafar (2013) Mechanistic Model of Stress Corrosion Cracking (SCC) of Carbon Steel in Acidic Solution with Presence of H2s. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

B

B S, Elarbe and N., Ridzuan and K., Yusoh and Ibrahim, Elganidi and N, Abdullah (2019) Screening of the factors for novel pour point depressant copolymer synthesis to improve the copolymer yield. IOP Conference Series: Materials Science and Engineering, 702 (012028). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

C

Chen, J. L. T. and Oumer, A. N. and Azizuddin, Abd Aziz (2020) Stability and density analysis of mango bark and mango leaf nanofluids. In: IOP Conference Series: Materials Science and Engineering; Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863 (012061). ISSN 1757-899X

Cassinath, Z. and A. K., Prasada Rao (2016) Development of Axial Continuous Metal Expeller for Melt Conditioning of Alloys. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

D

Dandang, N. A. N. and W. S., Wan Harun and Nur Zalikha, Khalil and A. H., Ahmad and F. R. M., Romlay and N. A., Johari (2017) Paraffin wax removal from metal injection moulded cocrmo alloy compact by solvent debinding process. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012020). ISSN 1757-8981

Das, S. and Ain, W. Q. and Azmir, Azhari and A. K., Prasada Rao (2016) Temperature Gradient Field Theory of Nucleation. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

E

Elganidi, I. and Elarbe, B.S. and Norhayati, Abdullah and N., Ridzuan (2019) Characterization of a novel terpolymer containing maleic anhydride-co-stearyl methacrylate-cobenhely acrylate for wax inhibition application. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 12-27. ISSN 17578981. (Published)

F

Fathie, Ahmad Zakil and K H, Muhammad Hassan and M Shafiq, Mohd Sueb and Ruzinah, Isha (2020) Growth and yield of Pleurotus Ostreatus using sugarcane bagasse as an alternative substrate in Malaysia. IOP Conference Series: Materials Science and Engineering, 736 (2). ISSN 1757-899X. (Published)

Faiz, Mohd Turan and Kartina, Johan and Nur Soliha, Sahimi and Nik Hisyamudin, Muhd Nor (2017) Development of Integrated Assessment System for Underground Power Cable Performance: A Case Study. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012020). ISSN 1757-8981 (Print); 1757-899X (Online)

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor and Badrul, Omar (2017) Sustainability Assessment Model in Product Development. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor (2016) Criteria Assessment Model for Sustainable Product Development. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160. ISSN 1757-8981 (Print); 1757-899X (Online)

Faiz, Mohd Turan and Kartina, Johan and Wan Nurul Syahirah, Wan Lanang and Nik Hisyamudin, Muhd Nor (2016) Development of Systematic Sustainability Assessment (SSA) for the Malaysian Industry. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Farah Amira, Mohd Ghazali and M. N., Ahmad and M. F., Ab. Rahim and Abdul Aziz, Jaafar (2016) Temperature Assessment of Heating Stage for a Thermoforming Equipment. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

H

Haryati, Awang and A F, Salmanfarsi and A Z, Misbahuddin and Mohamad Idris, Ali (2021) Slope stability analysis of rock mass using Rock Mass Rating and Slope Mass Rating. In: 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16-17 October 2020 , Putrajaya, Virtual. pp. 1-6., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online)

Husain, M B S and Gupta, Arun and Alashwal, B Y (2019) Development of keratin based hydrogels for biomedical applications. IOP Conference Series: Materials Science and Engineering, 702. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Awad, Omar I. (2016) Experimental Investigation of the Impact of Using Alcohol-Biodiesel-Diesel Blending Fuel on Combustion of Single Cylinder CI Engine. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 160 (012038). ISSN 1757-8981 (Print), 1757-899X (Online)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

I

I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online)

Ismail, . and Kamarul Hawari, Ghazali and Surfa, Yondri and Firdaus, . and Yefriadi, . and Nasrul, Harun (2020) The detecting of damage conductor with guided image filter. In: IOP Conference Series: Materials Science and Engineering, International Conference on Applied Sciences, Information and Technology 2019 , 1 - 3 November 2019 , Padang, Indonesia. pp. 1-6., 846 (012017). ISSN 1757-8981 (Print), 1757-899X (Online)

Ismail, N. A. and Mohd Yunus, M. Y. and Abd Aziz, Mohd Aizudin (2019) Comparison of optimal solvent extraction stages between P204 and [A336][P204] for the separation of europium and gadolinium. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2017) Investigation of the Fatigue Crack Propagation Behaviour in the Al Alloy/Hybrid MMC Bi-layer Material. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials and Intelligent Manufacturing (ICMIM 2017) , 21-23 August 2017 , National University of Singapore (NUS), Singapore. pp. 1-6., 244 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Iqbal, AKM Asif and Arai, Yoshio (2016) Analysis of Fatigue Crack Propagation Behaviour in SiC Particulate Al2O3 Whisker Reinforced Hybrid MMC. IOP Conference Series: Materials Science and Engineering, 114 (012115). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

K

Khairunisa, Muthusamy and Fadzil, Mat Yahaya and Muhammad Nazrin Akmal, Ahmad Zawawi and Saffuan, Wan Ahmad and Nur Azzimah, Zamri and Mohd Hanafi, Hashim and Mohd Hafizuddin, Rasid (2018) Effect of fly ash content towards Sulphate resistance of oil palm shell lightweight aggregate concrete. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-5., 342 (1). ISSN 17578981

Kartina, Johan and Faiz, Mohd Turan (2017) Framework of Systematic Sustainability Assessment Strategy (FSSAS) for Hydroelectric Power Industry in Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. pp. 1-10., 226 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris and Aiman, Mohd Halil and Nur Zalikha, Khalil (2017) Hardness Variation of Welded Boron Steel Using Continuous Wave (CW) and Pulse Wave (PW) Mode of Fiber Laser. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-5., 238 (012007). ISSN 1757-899X

K. A., Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2017) Improved Thermal Conductivity of Tio2-Sio2 Hybrid Nanofluid in Ethylene Glycol and Water Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012067). ISSN 1757-8981 (Print); 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan (2016) The Development of Sustainability Graduate Community (SGC) as a Learning Pathway for Sustainability Education - a Framework for Engineering Programmes in Malaysia Technical Universities Network (MTUN). In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-7., 160 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Kartina, Johan and Faiz, Mohd Turan (2016) Industrial Training Approach using GPM P5 Standard for Sustainability in Project Management: A Framework for Sustainability Competencies in the 21st Century. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-6., 160 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

L

Luqman, Abdul Halim and Firdaus, Basrawi and Mohd Yusof, Taib and Mohd Hazwan, Yusof and Zulkifli, Mustafa and Thamir K., Ibrahim (2020) A preliminary study on new cooling techniques for stingless bees hive. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863. ISSN 1757-8981 (Print); 1757-899X (Online)

M

M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981

M., Lutfi and H., Arien and M., Hendrawati and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli (2020) Assessment of safety performance level on simple urban residential building: Case study at Bogor City Indonesia. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 712 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

M. C., Mamat and Ahmad Bazli, Bustary and Abdul Aziz, Mohd Azoddein (2020) Oxidation of sulfide removal from petroleum refinery wastewater by using hydrogen peroxide. IOP Conference Series: Materials Science and Engineering, 736 (022103). pp. 1-11. ISSN 17578981. (Published)

M., Ishak and Norazlianie, Sazali and M. F., Ghazali (2020) A short review on different metal alloys on rapid cooling process. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (052034). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Razali, Hanipah and A. R., Razali (2017) The numerical assessment of motion strategies for integrated linear motor during starting of a free-piston engine generator. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012054). ISSN 1757-8981

M. A. A., Ahmad and Chin, S. Y. (2017) Screening of Catalyst and Important Variable for the Esterification of Acrylic Acid with 2 Ethylhexanol. In: 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016 , 1st - 3rd December 2016 , Sarawak, Malaysia. pp. 1-10., 206 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z., Zuwairi and Sunarti, Abd Rahman (2017) Study on CO2/ N2 Separation: The Effect of Rubbery Polymer Coating on PVDF Membrane. In: 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016 , 1st - 3rd December 2016 , Sarawak, Malaysia. pp. 1-7., 260 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Hafiz, Burhan and Nik Hisyamudin, Muhd Nor and Mogan, Yarwindran and Mustaffa, Ibrahim and Mohd Fahrul, Hassan and Mohd Azwir, Azlan and Faiz, Mohd Turan and Kartina, Johan (2017) Designing an Orthotic Insole by Using Kinect® XBOX Gaming Sensor Scanner and Computer Aided Engineering Software. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012026). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohamad Heerwan, Peeie and S. M., Asyraf and A. N., Efistein and C. H., Seah and J. M., Zikri and Syawahieda, J. N. (2017) Experimental Study of the Vehicle Dynamics Behavior during Lane Changing in Different Speeds. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

M. F., Nabil and Azmi, W. H. and K. A., Hamid and R., Mamat (2017) Heat Transfer and Friction Factor of Composite TiO2–SiO2nanofluids in Water-Ethylene Glycol (60:40) Mixture. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012066). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Fadzil, Abdul Rahim and Zahari, Taha and Rizalman, Mamat (2017) Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method. IOP Conference Series: Materials Science and Engineering, 257. pp. 1-21. ISSN 1757-8981 (Printed); 1757-899X(Online). (Published)

Mohd Rushdi, Mohamad and L. H., Shah and M., Ishak (2017) Investigation of Preheating Method on Joint Strength of Aluminium-Stainless Steel Dissimilar Welding Using Metal Inert Gas (MIG) Process. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-9., 238. ISSN 1757-8981 (Print), 1757-899X (Online)

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

Mah, K. H. and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and A. W., Mohammad (2017) Synthesis and Characterization of Polyester Thin Film Composite Membrane via Interfacial Polymerization: Fouling Behaviour of Uncharged Solute. IOP Conference Series: Materials Science and Engineering, 162 (1). pp. 1-7. (Published)

Munirah Ezzah, Tuan Zakaria and Saidatul Shima, Jamari and Yeong, Yi Ling and Suriati, Ghazali (2017) Synthesis of Superabsorbent Polymer via Inverse Suspension Method: Effect of Carbon Filler. IOP Conference Series: Materials Science and Engineering, 204 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M. H., Low and M. Mukhtar, N. and Hagos, F. Y. and M. M., Noor (2017) Tri-Fuel Emulsion Fuel Characterization, Stability and The Corrosion Effect. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012082). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah (2017) The Two-Stroke Poppet Valve Engine. Part 2: Numerical Investigations Of Intake And Exhaust Flow Behaviour. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. 012024., 257 (012024). ISSN 1757-8981

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2016) Mathematical Modelling of Mixed-Model Assembly Line Balancing Problem with Resources Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 012002 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali (2016) Modelling of Two-sided Assembly Line Balancing Problem with Resource Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160 (012005). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Aizzat , Zakaria and Hairi, Zamzuri and Saiful Amri, Mazlan (2016) Dynamic Curvature Steering Control for Autonomous Vehicle: Performance Analysis. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohd Fawzi, Zamri and Lim, Syh Kai and A. R., Yusoff (2016) Experimental Validation for Hot Stamping Process by Using Taguchi Method. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Madan Varmma, Suparmaniam and A. R., Yusoff (2016) Investigation of Surface Roughness and Tool Wear Length With Varying Combination of Depth of Cut and Feed Rate of Aluminium Alloy and P20 Steel Machining. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Marini, C. D. and Fatchurrohman, Nanang and Azmir, Azhari and Suraya, Sulaiman (2016) Product Development using QFD, MCDM and the Combination of these Two Methods. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Muthanna , Jamil and Noraini, Mohd Razali (2016) Simulation of Assembly Line Balancing in Automotive Component Manufacturing. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd, Nizar and Arimatsu, Naoya and Kawamitsu, Hiroshi and Takai, Kazuteru and Fukumoto, Masahiro (2016) Study on Optimal Surface Property Of WC-Co Cutting Tool for Aluminium Alloy Cutting. IOP Conference Series: Materials Science and Engineering, 114 (012024). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Mahgoub, B. K. M. and Sulaiman, S. A. and Karim, Z. A. A. and Hagos, F. Y. (2015) Experimental Study on the Effect of Varying Syngas Composition on the Emissions of Dual Fuel CI Engine Operating at Various Engine Speeds. IOP Conference Series: Materials Science and Engineering, 100 (012006). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohamad Zairi, Baharom and M. Z., Nuawi and Priyandoko, Gigih and S. M., Harris (2012) Eddy Current Braking Experiment using Brake Disc from Aluminium Series of A16061 and A17075. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Muhamad Hadie Aizzat, Asli and Muhamad Zuhairi, Sulaiman and Enoki, Koji and Okawa, Tomio Heat transfer coefficient of nucleate boiling in low concentration level of single and hybrid Al2O3-SiO2 waterbased nanofluids. IOP Conference Series: Materials Science and Engineering, 469 (012109). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

N

Norhafzan, B. and Khairil, C. M. and Aqida, S. N. (2021) Laser cladding process to enhanced surface properties of hot press forming die: A review. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-8., 1078 (012037). ISSN 1757-8981 (Print), 1757-899X (Online)

Norhafzan, B. and Aqida, S. N. and Khairil, C. M. (2021) Optimization of laser melting parameter to enhanced surface properties in hot press forming die. IOP Conference Series: Materials Science and Engineering, 1078 (012020). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Najihah, Mohd Ali and Fatimah, Dzaharudin and Erny Afiza, Alias (2020) Effects of varying ultrasound parameters on the oscillation of a microbubble near a boundary. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-8., 788 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Norazlianie, Sazali and W. N. W., Salleh and N. H., Ismail and K., Kadirgama and M. H. D., Othman and Z., Harun (2020) Advanced in carbon membrane by relating to coating-carbonization-cycles for oxygen performance. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (022008). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and R., Mamat and J. P., Siregar and T., Gunawan and W. N. W., Salleh and N. A. H. M., Nordin (2020) PI/NCC carbon membrane : effect of additives loading towards hydrogen separation. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (022002). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and R., Mamat and W. N. W., Salleh and A. F., Ismail and F., Aziz and N. I., Mahyon (2020) PI/NCC carbon membrane : effect of heating rates towards oxygen separation performance. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 736 (022009). ISSN 1757-8981 (Print), 1757-899X (Online)

Norazlianie, Sazali and W. N. W., Salleh and Siregar, J. P. and M. H. D., Othman and J., Jaafar and T., Gunawan (2020) PI/NCC-based carbon molecular sieve membranes for hydrogen purification : effect of aging times. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (022003). ISSN 1757-8981 (Print), 1757-899X (Online)

N A, Mohamad Basir and A A, Mohd Azoddein and A H, Abdul Razik and N A, A Azman (2020) Removal of ferum ions from acid mine drainage wastewater using jar test technique: Factorial design analysis. IOP Conference Series: Materials Science and Engineering, 991 (012096). pp. 1-11. ISSN 1757-899X. (Published)

Norazlianie, Sazali and M. F., Ghazali and J. P., Siregar and T., Gunawan and W. N. W., Salleh and N., Yusof (2020) A review on carbon membranes for hydrogen purification. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. , 736 (022004). ISSN 1757-8981 (Print), 1757-899X (Online)

Norliana, Bakar and Chin, Siew Choo and Siregar, J. P. and Ngien, S. K. (2020) A review on physical, mechanical, thermal properties and chemical composition of plant fibers. In: Energy Security and Chemical Engineering Congress, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur; Malaysia. pp. 1-8., 736 (5). ISSN 1757-8981 (Print); 1757-899X (Online)

Nor Azhar, Ahmad and Rahmah, Mokhtar and Roslina, Abd Hamid and Fauziah, Zainuddin (2019) Indoor Air Quality (IAQ) Sensing Device Prototype: Software-Hardware Architecture and Performance. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-6., 551 (012047). ISSN 1757-899X

Nur Hafizah, A Khalid and Abdul Rahman, Mohd Sam and Azman, Mohamed and Nor Hasanah, Abdul Shukor Lim and Nur Farhayu, Ariffin (2019) Properties of polymer concrete containing active micro filler of palm oil fuel ash. IOP Conference Series: Materials Science and Engineering, 620 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Noor Akma, Abu Bakar and Mazlina, Abdul Majid and Khalid, Adam (2019) Simulation and Modelling the Human Crowd Evacuation. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-4., 551 (012038). ISSN 1757-8981 (Print), 1757-899X (Online)

Norhaiza, Ghazali and Khairunisa, Muthusamy and Saffuan, Wan Ahmad (2019) Utilization of fly ash in construction. IOP Conference Series: Materials Science and Engineering, 601 (012023). pp. 1-8. (Published)

Nurmaryam Aini, Hashim and Siti Kholijah, Abdul Mudalip and Noorlisa, Harun and Rohaida, Che Man and Siti Zubaidah, Sulaiman and Zatul Iffah, Mohd Arshad and Shalyda, Md Shaarani (2018) Molecular dynamics simulation of mahkota dewa (phaleria macrocarpa) extract in subcritical water extraction process. In: 3rd International Conference on Global Sustainability and Chemical Engineering, ICGSCE 2017 , 15-16 February 2017 , Marriot Hotel, Putrajaya; Malaysia. pp. 1-6., 358 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

N. F. H., Rahmat and Ruwaida, Abdul Rasid (2017) Gasification of Empty Fruit Bunch with Carbon Dioxide In An Entrained Flow Gasifier for Syngas Production. In: 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016 , 1st - 3rd December 2016 , Sarawak, Malaysia. pp. 1-11., 206 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nur Khaleeda, Romli and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and W. S., Wan Harun and Salwani, Mohd Salleh and Mohamad Nazirul Mubin, Merzuki (2017) The Behavior Of Aluminium Carbon/Epoxy Fibre Metal Laminate Under Quasi-Static Loading. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-12., 257 (012046). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurul Nadia, Mohd Zawawi and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif (2017) Coefficient of Friction and Wear Rate Effects of Different Composite Nanolubricant Concentrations on Aluminium 2024 Plate. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012065). ISSN 1757-8981 (Print), 1757-899X (Online)

Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2017) Development of Sustainability Assessment Framework in Hydropower sector. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6-7 May 2017 , Melaka, Malaysia. pp. 1-6., 226 (012048). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurul Fatihah, Mahamad Roli and Wan Mohd Hafizuddin, Wan Yussof and Mazrul Nizam, Abu Seman and Syed Mohd Saufi, Tuan Chik and A. W., Mohammad (2017) Separating Xylose from Glucose using Spiral Wound Nanofiltration Membrane: Effect of Cross-flow Parameters on Sugar Rejection. IOP Conference Series: Materials Science and Engineering, 162 (1). pp. 1-6. (Published)

Nuruzzaman, D. M. and Debnath, U. K. and Chowdhury, M. A. (2016) Erosive Wear Characteristics of Multi-Fiber Reinforced Polyester under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. (Published)

Nuruzzaman, D. M. and Iqbal, AKM Asif and A. N., Oumer and Ismail, N. M. and Basri, S. (2016) Experimental Investigation on the Mechanical Properties of Glass Fiber Reinforced Nylon. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. and Rahaman, M. L. and A. N., Oumer (2016) Influence of Normal Loads and Sliding Velocities on Friction Properties of Engineering Plastics Sliding against Rough Counterfaces. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nuruzzaman, D. M. and Chowdhury, M. A. (2016) Investigation of Thin Film Deposition on Stainless Steel 304 Substrates Under Different Operating Conditions. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-8. (Published)

Nurrina, Rosli and K., Amagai (2016) Measurement of Interfacial Profiles of Wavy Film Flow on Inclined Wall. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nuruzzaman, D. M. and Kusaseh, N. and Basri, S. and A. N., Oumer and Zamzuri, Hamedon (2016) Modeling and Flow Analysis of Pure Nylon Polymer for Injection Molding Process. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nurul Afiqah , Zainal and Ajisman, Apen and A. R., Yusoff (2016) Modelling of Photovoltaic Module Using Matlab Simulink. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Nik Ruqiyah, Nik Hassan and Farah Amira, Mohd Ghazali and Abdul Aziz, Jaafar and Noor Mazni, Ismail (2016) Preparation of polypropylene thermoplastic container via thermoforming process. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-10., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Nuruzzaman, D. M. and Kamaruzaman, F. F. B. (2016) Processing and Mechanical Properties of Aluminium-Silicon Carbide Metal Matrix Composites. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-7. (Published)

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan and Ismed, Iskandar (2016) Reducing Bits in Electrodeposition Process of Commercial Vehicle - A Case Study. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-8., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

N. A. Z., Abdullah and M. S. M., Sani and M. M., Rahman and Izzuddin, Zaman (2015) A Review on Model Updating In Structural Dynamics. IOP Conference Series: Materials Science and Engineering, 100 (1). 012015. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nik Rosli, Abdullah and R., Mamat and Wyszynski, Miroslaw L. and Tsolakis, Anthanasios and Xu, Hongming (2013) Effects of Pilot Injection Timing and EGR on a Modern V6 Common Rail Direct Injection Diesel Engine. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Nuraini, Aziz and S. N., Aqida (2013) Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

P

Putra Jaya, Ramadhansyah and Nadiatul Adilah, Ahmad Abdul Ghani and S. Y., Ayman Mohammed and Putra Jaya, Ramadhansyah and Rokiah, Othman and Mohd Rosli, Hainin (2020) The Influence of Steel Slag as Alternative Aggregate in Permeable Concrete Pavement. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

P., Gupta and J., Roy and R. N., Rai and A. K., Prasada Rao and S. C., Saha (2016) Effect of B2O3 Containing Fluxes on the Microstructure and Mechanical Properties in Submerged Arc Welded Mild Steel Plates. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-7., 114 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

S

Siti Rohaida, Mohamed and Saiful Anwar, Che Ghani (2021) Investigation of design space in manufacturing meta-biomaterials by additive manufacturing. IOP Conference Series: Materials Science and Engineering, 1078. 012-024. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Suraidah, S. and Muhamad Ridzuwan, . and Gebremariam, M. A. and Azmir, Azhari and Kassa, Freselam Mulubrhan (2020) End milling finite element method for cutting force prediction and material removal analysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-8., 788 (012020). ISSN 1757-8981 (Print), 1757-899X (Online)

S., Shalbi and Norazlianie, Sazali and W. N. W., Salleh (2020) A design on the collimator for boron neutron capture therapy (BNCT) research facility at the thermal column of TRIGA MARK II. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (062023). ISSN 1757-8981 (Print), 1757-899X (Online)

S., Shalbi and Norazlianie, Sazali and W. N. W., Salleh (2020) A significant review on beam optimization for boron neutron capture therapy. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-19., 736 (062021). ISSN 1757-8981 (Print), 1757-899X (Online)

Suziyana, Mat Dahan and S. M., Yusof (2019) A simulation-based approach to assess eco-process innovation performance. In: Joint Conference of the 6th Annual Conference of Industrial and System Engineering 2019, ACISE 2019 and 1st International Conference on Risk Management as an Interdisciplinary Approach 2019, ICRMIA 2019 , 23-24 April 2019 , Gumaya, Hotel Semarang, Central Java. pp. 1-10., 598 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Subramaniam, Shathiswara Rao and Mahendran, Samykano and Selvamani, Sathish Kumar and W. K., Ngui and K., Kadirgama and Sudhakar, K. and M. S., Idris (2019) Preliminary Investigations of Polylactic Acid (PLA) Properties. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020038). ISBN 978-0-7354-1787-8

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) Preliminary investigations of Acrylonitrile Butadiene Styrene (ABS) properties. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Sharma, Swati and Gupta, Arun and Syed Mohd Saufi, Tuan Chik and Chua, Gek Kee and Poddar, Pradeep Kumar (2017) Dissolution and Characterization of Biofunctional Keratin Particles Extracted from Chicken Feathers. IOP Conference Series: Materials Science and Engineering, 191 (1). pp. 1-5. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

S. H., Mohamed Noor and K., Syam and Abdul Aziz, Jaafar and M. F., Mohamad Sharif and Mohd Riduwan, Ghazali and Wan Ismail, Ibrahim and M. F., Atan (2016) Development of a Working Hovercraft Model. IOP Conference Series: Materials Science and Engineering, 114. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

S. A., Wahid and I., Ismail and M. S. A., Rahim (2016) Magneto-rheological Defects and Failures: A Review. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-11., 114. ISSN 1757-8981 (Print); 1757-899X (Online)

Syarifah, Yunus and N. R., Abdullah and R., Mamat and A. A., Rashid (2013) An Overview of Palm, Jatropha & Algae as a Potential Biodiesel Feedstock in Malaysia. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2013) Effect of Reflow Profile on Intermetallic Compound Formation. IOP Conference Series: Materials Science and Engineering, 46. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Saad, M A and Abdurahman, N H and Rosli, Mohd Yunus and H S, Ali Oil emulsions and the different recent demulsification techniques in the petroleum industry - a review. IOP Conference Series: Materials Science and Engineering, 991 (012115). pp. 1-12. ISSN 17578981. (Published)

T

Toma, Farhana Sultana and Zulkifly, Jemaat and Beg, M. D. H. and Khan, M R and R. M., Yunus (2021) Comparison between lignin extraction by alkaline and ultrasound-assisted alkaline treatment from oil palm empty fruit bunch. IOP Conference Series: Materials Science and Engineering, 1095 (012027). pp. 1-10. ISSN 1757-8981(Print); ISSN: 1757-899X (Online). (Published)

Tesfay, A. H. and Hagos, F. Y. and Yohannes, K. G. and Nydal, O. J. (2015) Preparing Side Charging of PCM Storage: Theoretical and Experimental Investigation. IOP Conference Series: Materials Science and Engineering, 100 (012021). pp. 1-13. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

W

Wan Nor Afiqah, Wan Othman and Aziman, Abdullah (2020) Student learning progress as predictor for graduate employability performance. In: 6th International Conference on Software Engineering and Computer Systems, ICSECS 2019 , 25 - 27 September 2019 , Vistana Kuantan City Center, Kuantan, Pahang. pp. 1-8., 769 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Wan Nor Afiqah, Wan Othman and Aziman, Abdullah (2018) Assessing self-efficacy and college readiness level among new undergraduate students in computer science using metacognitive awareness inventory (MAI). In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 17578981

W. S. A., W. Omar and Ahmad Ziad, Sulaiman and Azilah, Ajit and Y., Chisti and A. L. T. , Chor (2017) Effect of Flow Rate, Duty Cycle, Amplitude, and Treatment Time of Ultrasonic Regimens Towards Escherichia Coli Harbouring Lipase. In: 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016 , 1–3 December 2016 , Miri, Sarawak, Malaysia. pp. 1-11., 206 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Wan Nurul Syahirah, Wan Lanang and Faiz, Mohd Turan and Kartina, Johan (2017) Systematic Assessment Through Mathematical Model for Sustainability Reporting in Malaysia Context. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012049). ISSN 1757-8981 (Print); 1757-899X (Online)

Wafiuddin, Md Ghazali and Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Nurazima, Ismail and Azizul Helmi, Sofian (2016) Design and Analysis of Tooth Impact Test Rig for Spur Gear. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Wan Hasbullah, Mohd Isa and Khairul Fikri, Muhammad and Ismail, Mohd Khairuddin and Ismayuzri, Ishak and A. R., Yusoff (2016) Geometrical Analysis on Cap-Shaped Coils for Power Optimization of the Vibration-Based Electromagnetic Harvesting System. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114. ISSN 1757-8981 (Print), 1757-899X (Online)

Wan Hasbullah, Mohd Isa and Zahari, Taha and Ismail, Mohd Khairuddin and Anwar, P. P. A. Majeed and Khairul Fikri, Muhammad and Ali, Mohammed A. H. and Jamaluddin, Mahmud and Zulkifli, Mohamed (2016) An Intelligent Active Force Control Algorithm to Control an Upper Extremity Exoskeleton for Motor Recovery. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114. ISSN 1757-8981 (Print), 1757-899X (Online)

Y

Y., Mohd Syafiq and Zamzuri, Hamedon and Wan Azila, Aziz and A. R., Yusoff (2017) Prevention of Crack In Stretch Flanging Process Using Hot Stamping Technique. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257. ISSN 1757-8981 (Print), 1757-899X (Online)

Z

Zaidatul Syahida, Adnan and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Nor Hasanah, Abdul Shukor Lim (2021) The assessment on the acceptance of waste materials as a partial cement replacement in Malaysian construction industry. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan Pahang, Malaysia. pp. 1-17., 1092 (1). ISSN 1757-899X

Z., Zulkfli and Fatchurrohman, Nanang (2021) Advancement in friction stir processing on magnesium alloys. IOP Conference Series: Materials Science and Engineering, 1092 (012006). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Zainon, S. N. M. and Azmi, W. H. (2020) Forced convection heat transfer and friction factor of water/bio-glycol mixture based TiO2-SiO2 nanofluids. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Pahang, Malaysia. pp. 1-3., 863 (012051). ISSN 1757-8981 (Print), 1757-899X (Online)

Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981

Zularisam, A. W. and Norul Wahida, Kamaruzaman (2017) Kinetic and Isotherm Studies for Nickel (II) Removal Using Novel Mesoparticle Graphene Sand Composite Synthesised From Sand and Arenga Palm Sugar. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials Technology and Energy , 20-21 April 2017 , Curtin University, Malaysia. pp. 1-8., 217. ISSN 1757-8981 (Print), 1757-899X (Online)

Z. M., Hafizi and A. M., Aizzuddin and N. I. A., Halim and M. F., Jamaludin (2017) Modal properties investigation of car body-in-white with attached windscreen and rear screen. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012038). ISSN 1757-8981 (Print); 1757-899X (Online)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Ali, Mohammed A. H. and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman (2016) Modelling and Control of an Upper Extremity Exoskeleton for Rehabilitation. IOP Conference Series: Materials Science and Engineering, 114 (012134). pp. 1-8. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)