Browse by Type

A

Aini, Ahmad (2008) Malu Lambang Iman. In: Friday Wisdom. Penerbit UMP, pp. 89-94. ISBN 9789675080074

Alginahi, Yasser M. and Kabir, M. Nomani (2019) Conclusion. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 339-341. ISBN 9781785615573

Euniza, J. and Hasanan, Md. Nor and Putra Jaya, Ramadhansyah and Zaiton, Haron and Mastura, Bujang and Wan Nur Aifa, W. A. (2020) Waste tyre rubber application in semi-rigid and flexible pavement. In: Handbook of Research on Resource Management for Pollution and Waste Treatment. IGI Global, pp. 1-21. ISBN 9781799803690

Kabir, M. Nomani and Alginahi, Yasser M. (2019) Introduction. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 1-12. ISBN 9781785615573

Kumar, Senthil (2021) Biting the silver bullet. In: PhD: The Amazing Journey. UMP Press, Kuantan, Pahang, pp. 201-212. ISBN 978-967-2226-90-1

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2013) Characteristics of Welded Thin Sheet AZ31 Magnesium Alloy. In: Experimental and Numerical Investigation of Advanced Materials and Structures. Advanced Structured Materials, 41 . Springer International Publishing, pp. 147-160. ISBN 978-3-319-00505-8 (print), 978-3-319-00506-5 (online)

Muhammad Farhan, Zolkepli and Mohd Fakhrurrazi, Ishak and Mohd Sharulnizam, Wahap (2022) The Application of Unmanned Aerial Vehicles (UAV) for Slope Mapping with the Determination of Potential Slope Hazards. In: Design in Maritime Engineering. Sspringer, Switzerland AG, pp. 45-65. ISBN 978-3-030-89988-2

N., Mohd Jamil (2015) Mathematical Analysis of a Kinetic Model for Enzymatic Cellulose Hydrolysis. In: Energy and Sustainability V. WIT Press, pp. 499-510. ISBN 978-1-78466-095-6

Norizam, Sulaiman and M. S., Jadin and Amran, Abdul Hadi and M. S., Najib and Mohd Ashraf, Ahmad and Nurul Shazrien Amysha, Yusuf (2017) Evaluation of Mobile Phone Wireless Charging System Using Solar and Inductive Coupling. In: Advances in Information and Communication Technology. Advances in Intelligent Systems and Computing, 538 (2). Springer International Publishing AG , Vietnam, pp. 238-247. ISBN  9783319490724

Rajan, Jose and Nair, V. M. and Rajul, K. and Wariar, P. R. S. (2014) Optimized Combustion Synthesis and Characterization of Nanostructured Ba2RESbO6 Perovskites. In: Nanostructured Oxides and Materials. Penerbit Universiti Malaysia Perlis, Perlis, Malaysia, pp. 155-184. ISBN 978-967-5415-95-1

B

Mahamarowi, Omar and Mohd Faizal, Jani and Mohd. Jais Anuar, Ahmad and Ahmad Irfan, Ikmal Hisham (2016) Sikap Dan Peranan Pencerap Muslim Semasa Gerhana Menurut Hadith. In: Prospektus Gerhana Matahari Penuh Palembang 2016. Salam Sdn. Bhd., Selangor, pp. 1-10.

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Raja Mohd Taufika, Raja Ismail and Reza Ezuan, Samin (2015) Trajectory Control and Sway Suppression of a Rotary Crane System. In: Machine Vision and Mechatronics in Practice. Springer-Verlag, Berlin Heidelberg, pp. 165-175. ISBN 978-3-662-45513-5 (print); 978-3-662-45514-2 (online)

Moorthy, Kohbalan and Jaber, Aws Naser and Mohd Arfian, Ismail and Ernawan, Ferda and Mohd Saberi, Mohamad and Safaai, Deris (2019) Missing-values imputation algorithms for microarray gene expression data. In: Microarray Bioinformatics. Methods in Molecular Biology, 1986 . Humana Press, New York, United States, pp. 255-266. ISBN 978-1-4939-9441-0

C

Charissa, Endar and Lee, Khai Loon (2023) Improving inventory accuracy with internet of things: A case study in a manufacturing company. In: Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 13-24. ISBN 978-967-2831-89-1

Sing, Jason Fung Chee and Lee, Khai Loon (2023) Enhancing order management with ERP systems: A case study in a subcontractor company. In: Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 25-35. ISBN 978-967-2831-89-1

D

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

Ngien, S. K. and Gisen, J. I. A. (2018) Marine Oil Spillage in Malaysian Waters. In: Disasters in Malaysia: Tomorrow is a Mystery. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 81-99. ISBN 978-967-2054-94-8

F

Ahamed, Nizam Uddin and Rabbi, M. F. and Zahari, Taha and K., Sundaraj and Tasriva, Sikandar (2017) The Effects of Rest Interval on Electromyographic Signal on Upper Limb Muscle during Contraction. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 10-13. ISBN 978-981-10-3736-8

F. M., Suhaimi and J. G., Chase and G. M., Shaw and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak (2016) Prediction of Sepsis Progression in Critical Illness Using Artificial Neural Network. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 127-132. ISBN 978-981-10-0265-6 (print); 978-981-10-0266-3 (online)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and Ummu Kulthum, Jamaludin (2016) Trial Protocol Analysis of Nursing Workload Intensity within ICU. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 294-297. ISBN 978-981-10-0265-6 (Print); 978-981-10-0266-3 (Online)

Nabi, F. G. and Sundaraj, K. and Kiang, L. C. and Palaniappan, R. and Sundaraj, S. and Ahamed, Nizam Uddin (2017) Artificial Intelligence Techniques Used for Wheeze Sounds Analysis: Review. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 37-40. ISBN 978-981-10-3736-8

Nor Haniza, Sarmin and Muhammad Azrin, Ahmad and Yuhani, Yusof (2014) Second Order Limit Language: An Introduction. In: Recent Advances In DNA Splicing Systems. Penerbit Universiti Teknologi Malaysia, Johor, Malaysia, pp. 43-57. ISBN 978-983-52-1000-6

Ranganathan, Balu and Sun, Bingfeng and Feng, Si-Shen (2014) Multifunctional Poly(D,L-Lactide-co-Glycolide)/ Montmorillonite (PLGA/MMT) Nanoparticles Decorated by Trastuzumab for Targeted Chemotherapy of Breast Cancer. In: Chemotherapeutic Engineering: Collected Papers of Si-Shen Feng - A Tribute to Shu Chien on His 82nd Birthday. Pan Stanford Publishing Pte. Ltd., Singapore, pp. 567-594. ISBN 9789814463140 (print); 9789814463157 (ebook)

H

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin (2019) PLS-SEM in Information Systems Research: A Comprehensive Methodological Reference. In: Proceedings of the International Conference on Advanced Intelligent Systems and Informatics 2018: AISI 2018. Advances in Intelligent Systems and Computing, 845 . Springer Nature, Switzerland, pp. 644-653. ISBN 978-3-319-99010-1

Asnul Hadi, Ahmad and Naher, S. and S. N., Aqida and D., Brabazon (2014) Routes to Spheroidal Starting Material for Semi-Solid Metal Processing. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier, Singapore, pp. 135-148. ISBN 9780080965338

Habeeb, Omar Abed and K., Ramesh and Sethupathi, Sumathi and R. M., Yunus (2017) Optimization and Characterization Study of Preparation Factors of Activated Carbon Derived from Coconut shell to Remove of H2S from Wastewater. In: Activated carbon: prepared from various precursors. Ideal International E-Publication, India, pp. 44-61. ISBN 978-93-86675-07-1

Imran Edzereiq, Kamarudin and M. A., Ameedeen and Zafril Rizal, M Azmi (2015) Experimental Analysis on Available Bandwidth Estimation Tools for Wireless Mesh Network. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer, Switzerland, pp. 525-535. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Lee, Lay Khoon and Liew, Siau-Chuin and Thong, Weng Jie (2015) A Review of Image Segmentation Methodologies in Medical Image. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, Pt. II (315). Springer, Switzerland, pp. 1069-1080. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Mostafa, Saifuldun and Saad, Hayder and Mustafa, Musa Jaber and Ali, Mohammed Hasan and Dhafer, Karam (2016) The Design Trends of Keystream Generator for Stream Cipher for High Immunity Attacks. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 (1). Springer International Publishing, Switzerland , pp. 877-889. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

Nur Sukinah, Aziz and Adzhar, Kamaludin (2015) Validation of Questionaire for Website Usability (QWU) Instrument Based on Experts Review. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 . Springer International Publishing, Switzerland, pp. 891-902. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

Thong, Weng Jie and M. A., Ameedeen (2015) A Survey of Petri Net Tools. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, 315 (Ch. 51). Springer, Switzerland, pp. 537-551. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Zafril Rizal, M Azmi and M. A., Ameedeen and Imran Edzereiq, Kamarudin (2015) Multi-objective Functions in Grid Scheduling. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer International Publishing, Switzerland, pp. 501-524. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Zailani, Abdullah and Amir, Ngah and Herawan, Tutut and Noraziah, Ahmad and Siti Zaharah, Mohamad and Abdul Razak, Hamdan (2017) ELP-M2: An Efficient Model for Mining Least Patterns from Data Repository. In: Recent Advances on Soft Computing and Data Mining: The Second International Conference on Soft Computing and Data Mining (SCDM-2016), Bandung, Indonesia, August 18-20, 2016 Proceedings. Advances in Intelligent Systems and Computing (AISC), 549 . Springer, Cham, pp. 224-232. ISBN 978-3-319-51279-2

I

Awi, Anis Aniza and Muhamad Tamyez, Puteri Fadzline (2022) Kumpulan Fokus. In: Metodologi kuantitatif dan kualitatif dalam sains sosial. Penerbit Universiti Malaya, Universiti Malaya, Kuala Lumpur, pp. 39-58. ISBN 978-967-488-230-3

J

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Discretization: Equal Frequency Binning, Entropy/MDL and Semi Naives Algorithms of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 77-87. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

K

Cheah, Cheng Teik and Fernando, Yudi (2018) Lean Logistics of the Transportation of Fresh Fruit Bunches (FFB) in the Palm Oil Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5422-5432. ISBN 9781522522553

Fadzlina, Mohd Fadzil and Fernando, Yudi (2018) Exploring Drivers of Closed Loop Supply Chain in Malaysian Automotive Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5378-5387. ISBN 9781522522553

Fairuz, Jasmi and Fernando, Yudi (2018) Notions of Maritime Green Supply Chain Management. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5465-5475. ISBN 9781522522553

Gani, Anisha Banu Dawood and Fernando, Yudi (2018) Concept and Practices of Cyber Supply Chain in Manufacturing Context. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5306-5316. ISBN 9781522522553

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hoo, Yee Hui and Fernando, Yudi (2018) Improving Competencies for the Courier Service Industry in Malaysia. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 2802-2809. ISBN 9781522522553

Ismail, Abustan and Mohd Yuhyi, Mohd Tadza and Mohd Tadza, Abdul Rahman (2015) Feasability Study on Phytoremediation in Treatment of Open Landfill Leachate. In: Ecological Modelling for Sustainable Development. Proceedings Series . Penerbit Universiti Sains Malaysia, Penang. ISBN 978-983-861-501-3

Junaida, Sulaiman and Siti Hajar, Wahab (2018) Heavy Rainfall Forecasting Model Using Artificial Neural Network for Flood Prone Area. In: IT Convergence and Security 2017. Lecture Notes in Electrical Engineering, 449 . Springer, Singapore, pp. 68-76. ISBN 978-981-10-6451-7

June Poh, Kim Tam and Fernando, Yudi (2018) Ecological Performance as a New Metric to Measure Green Supply Chain Practices. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5357-5366. ISBN 9781522522553

Mohd Ridzuan, Nordin and Yong, Liew Kong (2010) Synthesis of Alumina Nanofibers and Composites. In: Nanofibers. InTech, Rijeka, Croatia, pp. 405-418. ISBN 978-953-7619-86-2

Muhammad Shabir, Shaharudin and Fernando, Yudi (2018) Measuring Low Carbon Supply Chain. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5446-5455. ISBN 9781522522553

Munira, Halili and Latifah Naina, Mohamed and Fernando, Yudi (2018) Reflections of the 1Malaysia Supply Chain (1MSC). In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5527-5537. ISBN 9781522522553

Widiyanesti, Sri and Fernando, Yudi (2018) A Review of Supply Chain Risk Management in Agribusiness Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5550-5558. ISBN 9781522522553

Wulansari, Puspita and Fernando, Yudi (2018) Developing Global Supply Chain Manager for Business Expansion. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5327-5334. ISBN 9781522522553

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

L

Ji, Yuanfa and Fan, Z . and Sun, X. and Wang, S. and Yan, S. and Wu, S. and Fu, Q. and Kamarul Hawari, Ghazali (2020) Robust multi-user detection based on hybrid grey wolf optimization. In: Cognitive internet of things : frameworks, tools and aplications. Studies in Computational Intelligence, 810 (810). Springer Nature Switzerland, pp. 237-249. ISBN 978-3-030-04946-1

Norasman, Othman and Ahmad Khairi, Abd Wahab and Mohamad Hidayat, Jamal (2014) Effects of Seasonal Variations on Sandy Beach Groundwater Table and Swash Zone Sediment Transport. In: Proceedings of 34th Conference on Coastal Engineering. Coastal Engineering Research, California, pp. 1-12. ISBN 978-0-9896611-2-6

Norhayati, Kasim Sulamat and Lee, Khai Loon (2022) Improving customer satisfaction through supply chain management best practices in fast food restaurant. In: In Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit UMP, Kuantan, Pahang, pp. 39-46. ISBN 978-967-2831-28-0

Xue, Ting Lim and Lee, Khai Loon (2022) Supply chain drivers as a competitive advantage in hospitality company: A case study. In: In Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit UMP, Kuantan, Pahang, pp. 67-80. ISBN 978-967-2831-28-0

M

Ahmad Irfan, Ikmal Hisham (2016) Analisis Tematik Kalimah Al-Hilāl Di Dalam Al-Kutub Al-Sittah. In: Takwim Hijri: Isu & Pengurusan. Centre For Islamic Development Management Studies (ISDEV), Universiti Sains Malaysia, Pulau Pinang, pp. 61-74. ISBN 978-967-394-262-6

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Azwin Arif, Abdul Rahim and Nor Yazi, Khamis and Mohammad Radzi, Manap and Supyan, Hussin and Mohamed Amin, Embi (2013) The influence of demographics on mobile learning readiness: Science versus Social Science undergraduates. In: Mobile Learning: Malaysian Initiatives & Research Findings. Centre For Academic Advancement, Universiti Kebangsaan Malaysia & Department of Higher Education, Ministry of Higher Education, pp. 37-47. ISBN 978-983-3168

Cheow, Kah Chun and Ahmad Shahrizan, Abdul Ghani and Ker, Shao Jiun and Nur Syazwani, Abdul Gani and Muhamad Izdhar, Zaki and Ahmad Fakhri, Ab. Nasir (2018) Electronic water balancing tool. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 573-589. ISBN 9789811087875

Hafizoah, Kassim and Asiah, Kassim (2019) Embracing the Internet of Things for Language Education: Are We There Yet? In: Industrial Revolution 4.0: A Future Outlook. UMP Press, Kuantan, Pahang, pp. 86-105. ISBN 978-967-2226-50-5

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

Muddasser, Inayat and Shaharin, A. Sulaiman and Aini, Abd Jamil and Fiseha, M. Guangul and Atnaw, Samson M. (2015) The Study of Temperature Profile and Syngas Flare in Co-gasification of Biomass Feedstock in Throated Downdraft Gasifier. In: ICGSCE 2014 : Proceedings of the International Conference on Global Sustainability and Chemical Engineering. Springer, Singapore, pp. 203-210. ISBN 978-981-287-505-1 (online)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Significant Reduction and Rules of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 65-76. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

Nor Hidayati, Abdul Aziz and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Zulkifli, Md. Yusof and Mohd Saberi, Mohamad (2018) Single-solution simulated Kalman Filter algorithm for routing in printed circuit board drilling process. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 649-655. ISBN 9789811087875

Nor Syahirah, Abdul Wahid and Mohd Saberi, Mohamad and Abdul Hakim, Mohamed Salleh and Safaai, Deris and Chan, Weng Howe and Omatu, Sigeru and Corchado, Juan Manuel and Muhammad Farhan, Sjaugi and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) A Hybrid of Harmony Search and Minimization of Metabolic Adjustment for Optimization of Succinic Acid Production. In: 10th International Conference on Practical Applications of Computational Biology & Bioinformatics. Advances in Intelligent Systems and Computing, 477 (Pt. IV). Springer, Switzerland, pp. 183-191. ISBN 978-3-319-40125-6 (print); 978-3-319-40126-3 (online)

Nurul A’in, Nadzri and Chai, Kar Hoe and Mohd Mawardi, Saari and Saifuddin, Razali and Mohd Razali, Daud and Hamzah, Ahmad (2018) Vehicle detection system using tunnel magnetoresistance sensor. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 547-555. ISBN 9789811087875

Nurul Fatihah, Mohamad Roli and Wan Mohd Hafizuddin, Wan Yussof and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman (2023) Recovery of xylose from oil palm frond (OPF) bagasse hydrolysate using commercial spiral-wound nanofiltration membrane. In: Nanofiltration for Sustainability. CRC Press, Taylor and Francis Group, Boca Raton, FL, pp. 235-246. ISBN 9781003261827

Saifful Kamaluddin, Muzakir (2011) Chapter 27: Bohr’s Model of Hydrogen Atom. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-13. ISBN 9789673211630

Sunarti, Abd Rahman and Roshan, Raj Krishna and Norhidayana, Mandayar and Nadia Sofea, Hazleen and Sureena, Abdullah (2019) Methane purification from landfill using PVC based membrane. In: Gas Separation: Techniques, Applications and Effects. Chemistry Research and Applications (Chapter 3). Nova Science Publishers, Hauppauge, NY, pp. 119-139. ISBN 978-1-53614-606-6

Zahari, Taha and Muhammad Muaz, Alim and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Mohd Ali Hanafiah, Shaharudin and M. H. A., Hassan (2018) The identification and control of a finger exoskeleton for grasping rehabilitation. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 177-182. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and M. H. A., Hassan (2018) Classification of high performance archers by means of bio-physiological performance variables via k-nearest neighbour classification model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 377-384. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and M. H. A., Hassan (2018) Talent identification of potential archers through fitness and motor ability performance variables by means of artificial neural network. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 371-376. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan (2018) The application of support vector machine in classifying potential archers using bio-mechanical indicators. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 385-391. ISBN 9789811087875

Zuraina, Ali (2022) The Making of Leaders Through Involvement in Curricular Activities: A Systematic Literature Review. In: Masa Depan Pembelajaran Kokurikulum: Badan Beruniform, Kepimpinan & Kesukarelawan, Keusahawanan & Pengurusan, Sukan, Kebudayaan & Rekreasi, Sains, Teknologi & Inovasi. Penerbit UMP, Kuantan, Pahang, pp. 99-113. ISBN 978-967-2831-46-4

N

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Doh, Shu Ing and Tan, Yeong Yu and Chin, Siew Choo and Ngien, S. K. (2018) The Potential of Blended Cement Mortar Brick Using Sewage Sludge and Eggshell Waste. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer, Singapore, pp. 317-326. ISBN 978-981-13-0074-5

Edriyana, Abd Aziz and Hasmanie, Abdul Halim and Fatimah, Ali (2018) Educating the Public Experiences - Bengkel Komuniti Air dan Kehidupan - Kem Pemimpin Muda Prihatin Air dan Program Reaching the Grassroots Peringkat Kebangsaan 2017 (Zon Timur). In: Drinking Water for the Society. Penerbit UniMAP, Kangar, Perlis, pp. 85-97. ISBN 9789675415706

Jackson, Duncan and Mohd Hanafiah, Ahmad and Grace, Gary and Yoon, Jeeyun (2011) An alternative take on AC research and practice: Task-based Assessment Centres. In: Assessment Centres and Global Talent Management. Taylor & Francis, Surrey, pp. 33-47. ISBN 978-1409403869

Yap, H. T. and Ngien, S. K. and Norasman, Othman and Norhan, Abd Rahman and Choo, C. M. (2018) Effect of Inflow and Infiltration in Sewerage System of Residential Area, Kuantan, Pahang. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer, Singapore, pp. 333-343. ISBN 978-981-13-0074-5

O

Aini, Ahmad (2013) Islamic Perspective of the Learning Organization. In: Handbook of Research on the Learning Organization: Adaptation and Context. Edward Elgar Publishing, UK, pp. 145-156. ISBN 9781781004890 (print); 9781781004906 (ebook)

P

Bathrinath, S. and Rahul, K. and Pradeep, J. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Evaluation of influence of principles involved in industry 4.0 over coal industries using TISM. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 244-245. ISBN 9781522590781

Jolius, Gimbun and Ramakrishnan, Ramprasath and Ramakrishnan, Praveen and Ranganathan, Balu (2022) Needleless Electrospun Nanofibers for Drug Delivery Systems. In: Electrospun Nanofibers from Bioresources for High-Performance Applications. CRC Press, 6000 Broken Sound Pkwy NW, Boca Raton, FL 33487, USA, pp. 87-104. ISBN 9781003225577

N. A. M., Khairussaleh and Parke, G. A. R. and Imam, M. (2015) Fatigue Analysis of Cable Anchorages on Cable-Stayed Bridges. In: Multi-span Large Bridges: Proceeedings of the International Conference on Multi-span Large Bridges. CRC Press, Leiden, The Netherlands, pp. 937-946. ISBN 9781138027572

Norhaiza, Ghazali and Khairunisa, Muthusamy and Noorul Athirah, Abdullah and Muhamad Irfan, Muhamad Asri and Nur Farah Aziera, Jamaludin (2022) Effect of coal bottom ash as partial sand replacement for lightweight aggregate concrete. In: Materials for Sustainable Construction Engineering. Key Engineering Materials, 912 . Trans Tech Publications, Switzerland, Switzerland, pp. 119-125. ISBN 978-303571792-1

Nuraini, Mohd Yusoff and Jolius, Gimbun and M. M., Yusoff (2013) Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, US, pp. 151-157. ISBN 978-1-4614-6207-1, 978-1-4614-6208-8 (online)

Rajaram, R. and Jawahar, N. and Ponnambalam, S. G. and Mukund Nilakantan, Janardhanan (2019) Multi objective optimization of economic and environmental aspects of a three-Echelon Supply Chain. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 127-128. ISBN 9781522590781

R

Amirah Izzati, Mohammad Faizzull and Puteri Fadzline, Muhamad Tamyez (2021) Sexual Harassment and Workplace Bullying on Female Employees in Production Assembly Line. In: Service and Operations Management Series 3. 3, Chapter 5 . Penerbit UTHM, Batu Pahat, Johor, pp. 60-76. ISBN 978-967-2817-33-8

Mohd Faizal, Md Jaafar and Hamidah, M. S. and Muhd Norhasri, M. S. and Noorli, I. and Mohamad Ezad Hafez, M. P. (2015) Chloride Permeability of Nanoclayed Ultra-High Performance Concrete. In: InCIEC 2014:Proceedings of the International Civil and Infrastructure Engineering Conference 2014. Springer, Singapore, pp. 612-623. ISBN 978-981-287-289-0 (print); 978-981-287-290-6 (online)

Nour, A. H. and Azhari, H. Nour (2017) Production of Biogas and Performance Evaluation of Ultrasonic Membrane Anaerobic System (UMAS) for Palm Oil Mill Effluent Treatment (POME). In: Biological Wastewater Treatment and Resource Recovery. INTECH, pp. 229-243. ISBN 9789535130451 (print); 9789535130468 (online)

Saiful Nizam, Tajuddin and Che Mohd, Aizal and M. M., Yusoff (2016) Resolution of Complex Sesquiterpene Hydrocarbons in Aquilaria malaccensis Volatile Oils Using Gas Chromatography Technique. In: Agarwood. Tropical Forestry . Springer, Singapore, pp. 103-124. ISBN 978-981-10-0832-0 (print); 978-981-10-0833-7 (online)

S

Atnaw, Samson M. and Shaharin Anwar, Sulaiman and Suzana, Yusup (2017) Biomass Gasification. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 159-186. ISBN 978-3-319-49595-8

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2016) An Integrated Eco-Design Decision Making Tool. In: Sustainable Design and Manufacturing 2016. Springer International Publishing, pp. 537-548. ISBN 978-3-319-32096-0

Diyana, Kamarudin (2017) Cases on Sampling in the Business Setting. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 60-68. ISBN 978-967-2054-50-4

Hajar, Mohamed A. and Daing Nasir, Ibrahim and Al-Sharafi, Mohammed A. (2019) Value Innovation in the Malaysian Telecommunications Service Industry: Case Study. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT 2018). Advances in Intelligent Systems and Computing, 843 . Springer Nature, Switzerland, pp. 892-901. ISBN 978-3-319-99007-1

Ismayadi, Ismail and Idza Riati, Ibrahim and Rodziah, Nazlan (2017) Evolution of Magnetic Properties in Ferrites: Trends of Single-Sample and Multi-Sample Sintering. In: Sintering of Functional Materials. InTech, pp. 77-103. ISBN 978-953-51-3757-3

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Microbial Fuel Cells: Types and Applications. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 367-384. ISBN 978-3-319-49595-8

M., Waris (2017) Case on Managing Multi-Projects in Process Industry. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 18-21. ISBN 978-967-2054-50-4

M., Waris and Panda, Sitansu (2017) Case on Integrated Time and Cost Monitoring of Construction Projects. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 22-25. ISBN 978-967-2054-50-4

M. Amirul, Islam and Ahasanul, Karim and Puranjan, Mishra and C. K. M., Faizal and Khan, Maksudur R. and Abu, Yousuf (2019) Role of biocatalyst in microbial fuel cell performance. In: Waste to Sustainable Energy MFCs – Prospects through Prognosis. CRC Press, Boca Raton, Florida, pp. 86-87. ISBN 9781138328211 (hbk.); 9780429448799 (online)

M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Hydrolysis of Lignocellulosic Biomass for Recovering Hemicellulose: State of the Art. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 73-106. ISBN 978-3-319-49595-8

Mohd Hazwan, Yusof and Amirul Nawaf, Esa and Muhammad Fadhli, Suhaimi (2023) Thermal Comfort Attainment by Personal Vortex Tube Cooling Device. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer Science and Business Media Deutschland GmbH, pp. 263-271. ISBN 978-981-19-6687-3

Muhammad Arifuddin, Fitriady and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Urban Heat Island Phenomenon in Tropical Countries: Analysis of the Wake Flow Behind Slender High-Rise Building. In: Lecture Notes in Energy. Lecture Notes in Energy, 92 . Springer Link, Springer Nature Singapore, pp. 522-538. ISBN 2195-1284 (Printed); 2195-1292 (Online)

Noor Suraya, Romali and Muhammad @ S. A., Kushren Sulaiman and Zulkifli, Yusop and Zulhilmi, Ismail (2015) Flood Damage Assessment: A Review of Flood Stage-Damage Function Curve. In: ISFRAM 2014: Proceedings of the International Symposium on Flood Research and Management. Springer, Singapore, pp. 147-159. ISBN 978-981-287-364-4 (print); 978-981-287-365-1 (online)

Nur Syazwani, Ahmad (2017) Case on Importance of Strategic Location. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 32-37. ISBN 978-967-2054-50-4

Nurizzatul Atikha, Rahmat and Kamil Khalili, Haji Abdullah and Khairun Adhani, Khairunizam (2023) Natural Ventilation in Traditional Malay House A Study of Flow Pattern by an Enhanced Smoke Wire Technique. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer, pp. 289-303. ISBN 978-981-19-6687-3

Puteri Fadzline, Muhamad Tamyez (2019) The Challenges and Solutions of Cybersecurity Among Malaysian Companies. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, IGI Global, pp. 103-125. ISBN 9781522590781

Rohaida, Che Man and Nur Nadia, Mohd Zakaria and Nurul Nabila Huda, Baharudin (2022) Production of biopolymer from waste materials as the suitable alternative for plastics. In: Biotechnological Approaches in Waste Management. CRC Press, England, pp. 115-140. ISBN 9781003188292

Siddiqui, Muhammad Faisal and Singh, Lakhveer and Zularisam, A. W. (2017) Treatment of Dye Wastewater for Water Reuse Using Membrane Bioreactor and Biofouling Control. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 121-136. ISBN 9783319495958 (online); 9783319495941(print)

Siti Afiqah, Kamaruzaman (2017) Case on Customized Logistics Services. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 26-31. ISBN 978-967-2054-50-4

Siti Noraini, Abdul Malek (2017) Case on How to Improve of Supply Chain Productivity. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 11-17. ISBN 978-967-2054-50-4

Subramaniam, Bawani and Sorooshian, Shahryar (2017) Case on System Performance Improvement. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 2-5. ISBN 978-967-2054-50-4

T., Senthil Kumar (2017) Case on “To buy, or not to Buy”. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 38-43. ISBN 978-967-2054-50-4

Tengku Hasanul, Firdaus (2017) Case on Delivery Performance Improvement. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 6-10. ISBN 978-967-2054-50-4

Yousuf, Abu and Khan, Maksudur R. and Pirozzi, Domenico and Zularisam, A. W. and Atnaw, Samson M. (2017) Economic and Market Value of Biogas Technology. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 137-158. ISBN 9783319495958 (online); 9783319495941(print)

Zulkifli, Ahmad@Manap and Tan, Choon Mong (2016) Development of Portable Biofeedback Devices for Sport Applications. In: Proceedings of the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015 (ICoSSEET 2015). Springer, Singapore, pp. 55-66. ISBN 978-981-287-690-4 (print); 978-981-287-691-1 (online)

T

Nik Aloesnita, Nik Mohd Alwi (2015) Language Learning Performance using Engineering-Based Tasks via Text Chat. In: Contemporary Task-Based Language Teaching in Asia. Contemporary Studies in Linguistics . Bloomsbury Publishing Plc, London, pp. 193-210. ISBN 9781472572219

Siregar, J. P. and Z. M., Hafizi and M. R. M., Rejab and Jamiluddin, Jaafar and Mohammad Hazim, Mohamad Hamdan and Bachtiar, Dandi and Tezara, C. and S. M., Sapuan (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication and Applications. Elsevier, Amsterdam, Netherlands, pp. 489-514. ISBN 978-0-12-816129-6

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

V

Fahad, Ahmed Mohammed and Ahmed, Abdulghani Ali and M. N. M., Kahar (2019) Network Intrusion Detection Framework Based on Whale Swarm Algorithm and Artificial Neural Network in Cloud Computing. In: ICO 2018: Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing, 866 . Springer Nature, Switzerland, pp. 56-65. ISBN 978-3-030-00979-3

W

A. N., Sulaiman and Asiah, Kassim (2008) Technology in ESL: Evaluation on the Use of Software in Pronunciation Learning. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing., Glasgow, pp. 67-74. ISBN 978-0-947649-30-2

Asiah, Kassim and A. N., Sulaiman (2008) Courseware Material Development for Complete Beginners in Learning Hiragana and Katakana. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing, Glasgow, pp. 83-90. ISBN 978-0-947649-30-2

Jasni, Mohamad Zain and Qin, Hongwu and Ma, Xiuqin and Herawan, Tutut (2013) An Improved Genetic Clustering Algorithm for Categorical Data. In: Emerging Trends in Knowledge Discovery and Data Mining: PAKDD 2012 International Workshops: DMHM, GeoDoc, 3Clust, and DSDM, Kuala Lumpur, Malaysia, May 29 – June 1, 2012, Revised Selected Papers. Lecture Notes in Computer Science, 7769 (Lectur). Springer, Berlin Heidelberg, pp. 100-111. ISBN 978-3-642-36778-6

Nor Azlina, Alias and Lariyah, Mohd Sidek (2016) Application of 1D Shallow Flow Model for Simulation of Pollution Fate and Streamflow. In: ISFRAM 2015. Springer, Singapore, pp. 251-263. ISBN 978-981-10-0499-5 (Print); 978-981-10-0500-8 (Online)

X

Shakir, Hasan Awni and Jaber, Aws Naser (2018) A Short Review for Ransomware: Pros and Cons. In: Advances on P2P, Parallel, Grid, Cloud and Internet Computing: Proceedings of the 12th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC-2017). Lecture Notes on Data Engineering and Communications Technologies, 13 . Springer, Cham, Switzerland, pp. 401-411. ISBN 978-3-319-69835-9

Y

Alginahi, Hiba and Alginahi, Yasser M. and Kabir, M. Nomani (2019) Data Protection Laws. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), London, United Kingdom, pp. 309-337. ISBN 978-1-78561-557-3

Azlina, Ismail and Intan Suhana, Mohd Razelan and Mohammad Amirulkhairi, Zubir and Mohd Faizal, Md Jaafar (2018) Assessment on Traffic Noise Pollution in Malaysia. In: Disasters in Malaysia: Tomorrow is a Mystery. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 101-135. ISBN 978-967-2054-94-8

Z

Hafizoah, Kassim and Fatimah, Ali and Nik Aloesnita, Nik Mohd Alwi and Norrihan, Sulan and Nor Suhardiliana, Sahar and Noor Raha, Mohd Radzuan and Suriya Kumar, Sinnadurai (2018) English Proficiency Test on Admission: Development, Implementation, Challenges and Future Directions. In: Teaching And Learning English In Malaysian Higher Education: Sharing Experience To Improve Practice. UM Press, Kuala Lumpur, pp. 175-195. ISBN 978-967-488-028-6

Nik Aloesnita, Nik Mohd Alwi and Noor Raha, Mohd Radzuan and Noor Azlinda, Zainal Abidin and Nor Suhardiliana, Sahar and Hafizoah, Kassim and Fatimah, Ali and Norrihan, Sulan and Suriya Kumar, Sinnadurai and Zailin Shah, Yusoff (2018) Preparatory Intensive English: Preparing International Students for Academic Study in Higher Education. In: Teaching And Learning English In Malaysian Higher Education: Sharing Experience To Improve Practice. UM Press, Kuala Lumpur, pp. 43-60. ISBN 978-967-488-028-6

Ö

Aini, Ahmad (2014) Islamic Perspective of Knowledge Management. In: Handbook of Research on Knowledge Management Handbook of Research on Knowledge Management: Adaptation and Context. Edward Elgar Publishing, UK/ US, pp. 237-250. ISBN 9781783470419 (print); 9781783470426 (online)