Browse by Type

'Aqilah, Abd. Ghani and Syifak, Izhar Hisham and Nur Alya Afikah, Usop and Nor Bakiah, Abd Warif (2021) Watermarking techniques for mobile application: A review. In: Innovative Systems for Intelligent Health Informatics. Lecture Notes on Data Engineering and Communications Technologies, 72 . Springer, Switzerland, 796 -806.

A. K., Verma and A. K., Nadda and A., Gupta and S., Sharma (2022) Plastic degradation and utilization by microbes: Challenges and scope. In: Enzymes for Pollutant Degradation. Microorganisms for Sustainability, 30 . Springer, Singapore, https://doi.org/10.1007/978-981-16-4574-7_9, pp. 177-192.

A. N., Sulaiman and Asiah, Kassim (2008) Technology in ESL: Evaluation on the Use of Software in Pronunciation Learning. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing., Glasgow, pp. 67-74. ISBN 978-0-947649-30-2

Abbas Saliimi, Lokman and M. A., Ameedeen (2019) Modern chatbot systems: a technical review. In: Proceedings of the Future Technologies Conference (FTC) 2018. Advances in Intelligent Systems and Computing, 2 . Springer Nature Switzerland, Switzerland, pp. 1012-1023. ISBN 978-3-030-02683-7

Abd Hamid, Zahidy and Noor Azlinna, Azizan and Sorooshian, Shahryar (2017) An Analytical Algorithm for Delphi Method for Consensus Building and Organizational Productivity. In: Organizational Productivity and Performance Measurements Using Predictive Modeling and Analytics (Advances in Business Information Systems). IGI Global, Pennsylvania (USA), pp. 62-79. ISBN 9781522506546

Abdulhadi, Hassan A. and Aqida, Syarifah N. and Ismail, Izwan (2019) Tool Failure in Die Casting. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, pp. 1-11. ISBN 978-0-12-803581-8

Abdullah, Luqman Chuah and Jolius, Gimbun and Fakhru'l-Razi, A. and Sahari, Barkawi and Thomas, S. Y. Choong (2011) Prediction of CO and NOx Abatement in Catalytic Converter of a Compressed Natural Gas Vehicle (CNGV) Cold-Start Engine. In: Advances in Environmental Research. Nova Science Publishers , New York, United States, pp. 75-90. ISBN 978-1-61209-975-0

Abubakar, Adamu I. and Zeki, Akram M. and Chiroma, Haruna and Muaz, Sanah Abdullahi and Sari, Eka Novita and Herawan, Tutut (2015) Spread Spectrum Audio Watermarking Using Vector Space Projections. In: Advances in Intelligent Informatics. Advances in Intelligent Systems and Computing, 320 . Springer, Switzerland, pp. 297-307. ISBN 978-3-319-11217-6 (print); 978-3-319-11218-3 (online)

Addie Irawan, Hashim and Nonami, Kenzo and Mohd Razali, Daud (2013) Optimal Impedance Control with TSK-type FLC for Hard Shaking Reduction on Hydraulically Driven Hexapod Robot. In: Autonomous Control Systems and Vehicles. Intelligent Systems, Control and Automation: Science and Engineering, 65 . Springer, Japan, pp. 223-236. ISBN 978-4-431-54275-9 (print); 978-4-431-54276-6 (online)

Adnun , M. Hussein and K., Kadirgama and D., Rarnasarny and R. A., Bakar (2017) Heat Transfer Enhancement with Nanofluids for Automotive Cooling. In: Engineering Applications of Nanotechnology: From Energy to Drug Delivery (Topics in Mining, Metallurgy and Materials Engineering). Springer, pp. 71-100. ISBN 978-3-319-29759-0

Ahamad Khilji, Irshad and Siti Nadiah, Mohd Saffe and Reddy Chilakamarry, Chaitanya and Siti Aishah, Rusdan (2022) The crashworthiness performance of the energy-absorbing composite structure—A review. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering (LNME) . Springer, Singapore, Singapore, pp. 637-650. ISBN 978-981-19-2889-5 (Print); 978-981-19-2890-1(Online)

Ahamed, Nizam Uddin and Rabbi, M. F. and Zahari, Taha and K., Sundaraj and Tasriva, Sikandar (2017) The Effects of Rest Interval on Electromyographic Signal on Upper Limb Muscle during Contraction. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 10-13. ISBN 978-981-10-3736-8

Ahmad, Mohd Hanafiah (2021) Comeback is Real. In: PhD Experience. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 1-7. (In Press / Online First)

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and M. Nordin, A. Rahman (2018) Parallel guided image processing model for ficus deltoidea (Jack) moraceae varietal recognition. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 487-503. ISBN 9789811087875

Ahmad Irfan, I. H. (2022) Cerapan anak bulan dibantu data dari sumber diiktiraf. In: Anak Bulan Syawal: Monograf Penentuan Aidilfitri 1443/2022. Persatuan Jurufalak Syarie, Putrajaya, pp. 29-32. ISBN 978-629-97041-1-9

Ahmad Irfan, Ikmal Hisham (2016) Analisis Tematik Kalimah Al-Hilāl Di Dalam Al-Kutub Al-Sittah. In: Takwim Hijri: Isu & Pengurusan. Centre For Islamic Development Management Studies (ISDEV), Universiti Sains Malaysia, Pulau Pinang, pp. 61-74. ISBN 978-967-394-262-6

Ahmad Kamil, Arshad and Ekarizan, Shaffie and Fauzilah, Ismail and Putra Jaya, Ramadhansyah (2020) Cold in-place recycling for flexible pavements. In: GREEN Infrastructure : Materials and Techniques. Universiti Malaysia Perlis, Perlis, pp. 49-76. ISBN 978-967-0922-90-4

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro (2018) Effect of assistive grouser mechanism on lightweight rover power consumption pattern on steep soft sand inclines. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 9789811087875

Ahmad Najmuddin, Ibrahim and Pang, Oh Yi and Yap, Wong Kien and Ahmad Shahrizan, Abdul Ghani (2018) Design of fast climbing robot for tree with multiple diverging branche. In: Lecture Notes in Mechanical Engineering. Springer Nature Singapore, pp. 395-402. ISBN 978-981-13-8322-9

Ahmad Razlan, Yusoff and Syh Kai, Lim (2019) Microstructure and mechanical properties of boron sheet metal steels in hot press forming process with nanofluid as coolant. In: Reference Module in Materials Science and Materials Engineering. Elsevier, pp. 1-15. ISBN 978-0-12-803581-8

Ahmad Shahir, Jamaludin and Hosokawa, A. and Tatsuaki, Furumoto and Tomohiro, Koyano and Yohei, Hashimoto (2018) High precision estimation on physical behavior for cutting with various tool rake angle by finite element method. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 715-723. ISBN 9789811087875

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Aidil Redza, Khan and Mohd Faizal, Jamlos and Nurmadiha Osman, Osman and Muhammad Izhar, Ishak and Fatimah, Dzaharudin and You Kok, Yeow and Khairil Anuar, Khairi (2021) DSRC Technology in Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) IoT System for Intelligent Transportation System (ITS): A Review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 97-106. ISBN 978-981-33-4597-3

Aini, Ahmad (2014) Islamic Perspective of Knowledge Management. In: Handbook of Research on Knowledge Management Handbook of Research on Knowledge Management: Adaptation and Context. Edward Elgar Publishing, UK/ US, pp. 237-250. ISBN 9781783470419 (print); 9781783470426 (online)

Aini, Ahmad (2013) Islamic Perspective of the Learning Organization. In: Handbook of Research on the Learning Organization: Adaptation and Context. Edward Elgar Publishing, UK, pp. 145-156. ISBN 9781781004890 (print); 9781781004906 (ebook)

Aini, Ahmad (2008) Malu Lambang Iman. In: Friday Wisdom. Penerbit UMP, pp. 89-94. ISBN 9789675080074

Aini, Ahmad and Zuridan, Mohd Daud (2007) Spiritual Intelligence. In: Professional Skills Kit for UMP Graduates. Universiti Malaysia Pahang.

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Amiril Sahab, Abdul Sani and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2018) Modelling of fuzzy inference system for micro milling - a preliminary study through FEM. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 445-456. ISBN 978-981-13-8323-6

Aisyah Khaleeda, Rosli and Noor Raha, Mohd Radzuan (2022) Degree of Formality: Analyses of Linguistic Deviations in a Facebook Status and Comments Section. In: Spearheading Excellence in Humanities, Social Sciences and Business Management Research. Penerbit UMP, Kuantan, Pahang, pp. 1-6. ISBN 978-967-2831-36-5

Al-Douri, Yarub and Jose, Rajan (2022) Optical properties of quantum dots. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology: Fundamentals and Application. Woodhead Publishing Series in Electronic and Optical Materials . Elsevier, New Delhi, India, pp. 631-663. ISBN 978-0-323-85457-3

Al-Emran, Mostafa and Mezhuyev, Vitaliy and Adzhar, Kamaludin (2019) PLS-SEM in Information Systems Research: A Comprehensive Methodological Reference. In: Proceedings of the International Conference on Advanced Intelligent Systems and Informatics 2018: AISI 2018. Advances in Intelligent Systems and Computing, 845 . Springer Nature, Switzerland, pp. 644-653. ISBN 978-3-319-99010-1

Al-Nadwi, Musaddiq Majid Khan and Refat, Nadia and Zaman, Nafees and Rahman, Md. Arafatur and Bhuiyan, Md Zakirul Alam and Ramdan, Razali (2018) Cloud Enabled e-glossary System: A Smart Campus Perspective. In: SpaCCS 2018: Security, Privacy, and Anonymity in Computation, Communication, and Storage. Lecture Notes in Computer Science, 11342 . Springer, Cham, pp. 251-260. ISBN 978-3-030-05345-1

Al-haimi, Basheer and Daing Nasir, Ibrahim and Ab Hamid, Mohd Rashid (2019) Replicating Malaysian Model of Building World-Class Universities Across Yemen. In: Advancements in Global Business Research Across Emerging Countries: Monograph Book. McGraw Hill Education (India) Private Limited, India, pp. 294-312. ISBN 978-93-5316-740-0

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ali, Hassan Alsaggaf (2023) Biosurfactant production by utilizing waste products of the food industry. In: Industrial Applications of Biosurfactants and Microorganisms: Green Technology Avenues from Lab to Commercialization. Academic Press, Cambridge, MA, pp. 59-77. ISBN 978-0-443-13288-9

Alara, Oluwaseun Ruth and Abdurahman, Nour Hamid and Ali, Hassan Alsaggaf (2024) Biosurfactants for sustainability. In: Industrial Applications of Biosurfactants and Microorganisms: Green Technology Avenues from Lab to Commercialization. Academic Press, Cambridge, MA, 437 -453. ISBN 978-0-443-13288-9

Alginahi, Hiba and Alginahi, Yasser M. and Kabir, M. Nomani (2019) Data Protection Laws. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), London, United Kingdom, pp. 309-337. ISBN 978-1-78561-557-3

Alginahi, Yasser M. and Kabir, M. Nomani (2019) Conclusion. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 339-341. ISBN 9781785615573

Ali, Eman N. and Ahmad Adzhim, Abdull Aziz (2015) Comparison of Biodiesel Properties Produced from Moringa oleifera Seeds Oil and Palm Oil. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM) , Melaka, pp. 261-265. ISBN 978-967-0257-53-2

Ali, Mohammed A. H. and Mailah, Musa (2018) Online Mapping-Based Navigation System for Wheeled Mobile Robot in Road Following and Roundabout. In: Mobile Robots. IntechOpen, pp. 1-23.

Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2015) Wheeled Mobile Robot Path Control in a Complex Trajectory using HybridMethods. In: Recent Advances in Electrical Engineering. Recent Advances in Electrical Engineering Series, 47 . WSEAS Press, Bulgaria, pp. 38-43. ISBN 978 -1-61804- 299 -6

Ali, Muhammad Qasim and Noormazlinah, Ahmad and Solehah, Shamsuddin (2024) Significance of halal product, halal certification and management systems in industries and their challenges. In: Development of Islamic economy: Lesson learned from various countries. Yayasan Bhakti Masyarakat Ekonomi Syariah, Jakarta, pp. 138-159. ISBN 9786239490218

Ali, Obed Majeed and R., Mamat and Rasul, M. G. and Najafi, G. (2017) Chapter eighteen-potential of biodiesel as fuel for diesel engine. In: Clean Energy for Sustainable Development: Comparisons and Contrasts of New Approaches. Elsevier, pp. 557-590. ISBN 978-0-12-805423-9

Aliyu, Ismail Ishaq and Usman, Abubakar and Suleiman, Ahmad Abubakar and Othman, Mahmod and Hanita, Daud and Sokkalingam, Rajalingam and Panitanarak, Uthumporn and Muhammad Azrin, Ahmad (2023) Perspective Chapter: A New Bivariate Inverted Nakagami Distribution – Properties and Applications. In: New Trends and Challenges in Open Data. IntechOpen, pp. 1-17. ISBN 978-1-83769-591-1

Alsewari, Abdulrahman A. and Kamal Z., Zamli (2014) An Orchestrated Survey on T-Way Test Case Generation Strategies Based on Optimization Algorithms. In: The 8th International Conference on Robotic, Vision, Signal Processing & Power Applications. Lecture Notes in Electrical Engineering, 291 . Springer, Singapore, pp. 255-263. ISBN 978-981-4585-41-5 (print); 978-981-4585-42-2 (online)

Amir Izzani, Mohamed and Benedick Conolius, Gabriel Addris and Norlin, Pauzi and Mohd Herwan, Sulaiman and Mohd Razali, Daud and Kadowaki, Kazunori (2018) Current measurement of engine oils under various voltage application. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 611-616. ISBN 978-981-13-3708-6

Amir Izzani, Mohamed and Siti Nor Aisyah, Burhanudin and M. S., Jadin (2018) Parameter (Voltage, Current, Time) study for thermoelectric cooler (TEC) for automobile air-conditioner. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 617-622. ISBN 978-981-13-3708-6 (Unpublished)

Amir Luqman, Sanusi and Nurul Khairiyyah, Mohd Zain and Izan Izwan, Misnon and Ahmad Salihin, Samsudin and Jose, Rajan (2020) Synthesis and electrochemical properties of ternary Co-, Cu- and Ni- based metal-organic frameworks electrode for battery supercapacitor hybrid application. In: Materials Science Forum. Trans Tech Publications, Switzerland, pp. 17-22. ISBN 978-303571664-1

Amirah Izzati, Mohammad Faizzull and Puteri Fadzline, Muhamad Tamyez (2021) Sexual Harassment and Workplace Bullying on Female Employees in Production Assembly Line. In: Service and Operations Management Series 3. 3, Chapter 5 . Penerbit UTHM, Batu Pahat, Johor, pp. 60-76. ISBN 978-967-2817-33-8

Amizatulhani, Abdullah and Hemanta, Hazarika and Noriyuki , Yasufuku and Ryohei , Ishikura (2017) Numerical Study on the Seismic Response of Waterfront Retaining Wall Reinforced with Cushion. In: Geotechnical Hazards from Large Earthquakes and Heavy Rainfalls. Springer, Japan, pp. 545-554. ISBN 978-4-431-56205-4

Anwar, P. P. A. Majeed and David, N. V. and S., Khairiyah (2012) Elastic And Dynamic Response Characteristics Of Kenaf/polypropylene Composites. In: High Performance Structures and Materials VI. WIT Transactions on The Built Environment, 124 . WIT Press, pp. 395-404. ISBN 978-1-84564-596-0 (print); 978-1-84564-597-7 (online)

Aqida, S.N. and Shah, L.H and Naher, S. and Brabazon, D. (2023) Rapid solidification processing and bulk metallic glass casting. In: Comprehensive Materials Processing 2nd edition. Elsevier, pp. 1-22. ISBN 9780323960205, eBook ISBN: 9780323960212

Asiah, Kassim and A. N., Sulaiman (2008) Courseware Material Development for Complete Beginners in Learning Hiragana and Katakana. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing, Glasgow, pp. 83-90. ISBN 978-0-947649-30-2

Asmadi, Ali and Rosli, Mohd Yunus and Mohamad, Awang and Sofiah, Hamzah and Mohammad Hakim, Che Harun and Fazureen, Azaman and Muhammad Abbas, Ahmad Zaini (2022) Polysulfone/Cellulose Acetate Phthalate/Polyvinylpyrrolidone (PSf/CAP/PVP) Blend Membranes: Effect of Evaporation Time on Blend Membrane Characteristics. In: Design in Maritime Engineering. Advanced Structured Materials book series (STRUCTMAT), 167 . Springer Champ, Cham, pp. 145-152. ISBN 978-3-030-89987-5(Printed); 978-3-030-89988-2(Online)

Asnul Hadi, Ahmad and Naher, S. and S. N., Aqida and D., Brabazon (2014) Routes to Spheroidal Starting Material for Semi-Solid Metal Processing. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier, Singapore, pp. 135-148. ISBN 9780080965338

Asogan, Arjun and Norazlianie, Sazali (2024) Revolutionizing ghee production through Moringa Oleifera SP. flavor infusion (ID110). In: Bridging Boarders: Global Innovations for Sustainable Development. Development, Research & Innovation, Series 1 . Penerbit UTHM, Johor, pp. 14-23. ISBN 978-629-490-061-5

Atnaw, Samson M. and Shaharin Anwar, Sulaiman and Suzana, Yusup (2017) Biomass Gasification. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 159-186. ISBN 978-3-319-49595-8

Aw, Mei Yee and Mohd Saberi, Mohamad and Chong, Chuii Khim and Safaai, Deris and Muhammad Akmal, Remli and Mohd Arfian, Ismail and Corchado, Juan Manuel and Omatu, Sigeru (2019) Parameter estimation of essential amino acids in Arabidopsis thaliana using hybrid of bees algorithm and harmony search. In: Practical Applications of Computational Biology and Bioinformatics, 12th International Conference. Advances in Intelligent Systems and Computing . Springer Verlag, Berlin, Germany, pp. 9-16. ISBN 978-3-319-98702-6

Awanis, Romli and Prickett, Paul and Setchi, Rossitza and Soe, Shwe (2016) An Integrated Eco-Design Decision Making Tool. In: Sustainable Design and Manufacturing 2016. Springer International Publishing, pp. 537-548. ISBN 978-3-319-32096-0

Awi, Anis Aniza and Muhamad Tamyez, Puteri Fadzline (2022) Kumpulan Fokus. In: Metodologi kuantitatif dan kualitatif dalam sains sosial. Penerbit Universiti Malaya, Universiti Malaya, Kuala Lumpur, pp. 39-58. ISBN 978-967-488-230-3

Ayasrah, Omar and Faiz, Mohd Turan (2021) A Review of Multi-criteria Decision-Making Methods Using Application of Variable Weight Theory and IF-TOPSIS-EF. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, pp. 13-24. ISBN 978-981-15-9505-9

Ayodele, Bamidele V. and Sureena, Abdullah (2018) An Overview of Response Surface Methodology Approach to Optimization of Hydrogen and Syngas Production by Catalytic Reforming of Greenhouse Gases (CH4 and CO2). In: Statistical Approaches With Emphasis on Design of Experiments Applied to Chemical Processes. INTECH, pp. 65-78.

Ayoob, Ayoob A. and Su, Gang and Wang, Desheng and Mohammed, Muamer N. and Hammood, Omar A. (2018) Hybrid LTE-VANETs Based Optimal Radio Access Selection. In: Recent Trends in Information and Communication Technology: Proceedings of the 2nd International Conference of Reliable Information and Communication Technology (IRICT 2017). Lecture Notes on Data Engineering and Communications Technologies, 5 . Springer International Publishing, pp. 189-200. ISBN 978-3-319-59427-9

Azi Izwani, Nor Hamzah and Lee, Chia Kuang and Zetty Ain, Kamaruzzaman (2020) Perceived sensory dimension for mental health and well-being: A review. In: Charting a Sustainable Future of ASEAN in Business and Social Sciences. Springer, pp. 179-189. ISBN 978-981-15-3859-9

Azizul Helmi, Sofian and Kazuhiko, Noda (2015) The Investigation of Zinc-Rich Paint (ZRP) Behavior in NaCl Solution by Electrochemical Methods. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 3-7. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Azlina, Ismail and Intan Suhana, Mohd Razelan and Mohammad Amirulkhairi, Zubir and Mohd Faizal, Md Jaafar (2018) Assessment on Traffic Noise Pollution in Malaysia. In: Disasters in Malaysia: Tomorrow is a Mystery. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 101-135. ISBN 978-967-2054-94-8

Azmana, Motia and Syed Mahmood, . and Nayeem, Abdullah and Mohd Azmir, Arifin (2023) Chitosan-based bionanocomposites: Synthesis, properties, and applications. In: Advances in Bionanocomposites. Materials, Applications, and Life Cycle, Micro and Nano Technologies . Elsevier B.V., Amsterdam, Netherlands, 133 -168. ISBN 978-0-323-91764-3

Azrina, Abd Aziz and Fatema, Khatun and Minhaj, Uddin Monir and Lan Ching, Sim and Kah Hon, Leong (2022) TiO2 A semiconductor photocatalyst. In: Titanium Dioxide. Advances and Applications . InTechOpen, Malaysia, pp. 47-57. ISBN 978-1-83969-476-9 (Printed); 978-1-83969-477-6(Online)

Azrina, Abd Aziz and Khatun, Fatema and Monir, Minhaj Uddin and Sim, Lan Ching and Leong, Kah Hon (2021) TiO2: A Semiconductor Photocatalyst. In: Titanium Dioxide. IntechOpen, pp. 1-17.

Azura, Amid and Nurul Azira, Ismail and Zatul Iffah, Mohd Arshad (2015) Case Study: Recombinant Bromelain Selection. In: Recombinant Enzymes - From Basic Science to Commercialization. Springer International Publishing, Switzerland, pp. 143-157. ISBN 978-3-319-12396-7 (Print); 978-3-319-12397-4 (Online)

Azwin Arif, Abdul Rahim and Nor Yazi, Khamis and Mohammad Radzi, Manap and Supyan, Hussin and Mohamed Amin, Embi (2013) The influence of demographics on mobile learning readiness: Science versus Social Science undergraduates. In: Mobile Learning: Malaysian Initiatives & Research Findings. Centre For Academic Advancement, Universiti Kebangsaan Malaysia & Department of Higher Education, Ministry of Higher Education, pp. 37-47. ISBN 978-983-3168

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Ahmad Fakhri, Ab. Nasir and Hamid, Umar Zakir Abdul (2018) Effect of road profile on normal force generated on electric vehicle. In: Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 237-248. ISBN 978-981-13-8323-6

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2018) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic vehicle. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 611-621. ISBN 9789811087875

Babu, Devin and Abdul Nasir, Abd Ghafar and Syukran Hakim, Norazman and Mohd Amir Shahlan, Mohd-aspar (2024) Analysis of grasping mechanism for random regular object of improved prosthetic robotic arm. In: Progressive and Integrative Ideas and Applications of Engineering Systems Under the Framework of IOT and AI. Lecture Notes in Electrical Engineering, 1076 . Springer, Singapore, 16 -28. ISBN 978-981996302-7

Bakiss Hiyana, Abu Bakar and Hamzah, Ahmad (2021) H∞ filter with fuzzy logic estimation to refrain finite escape time. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 978-981. ISBN 978-981-33-4597-3

Balsam, A. Mustafa (2014) Classifying Software Requirements Using Kano's Model to Optimize Customer Satisfaction. In: New Trends in Software Methodologies, Tools and Techniques. Frontiers in Artificial Intelligence and Applications, 265 . IOS Press, Singapore, pp. 271-279. ISBN 978-1-61499-433-6 (print); 978-1-61499-434-3 (online)

Balsam A. J., Mustafa and Mazlina, Abdul Majid (2023) The Role of Metamodeling in Systems Development. In: Encyclopedia of Data Science and Machine Learning. IGI Global, pp. 2421-2436. ISBN 9781799892205

Bathrinath, S. and Rahul, K. and Pradeep, J. and Ponnambalam, S. G. and Saravanasankar, S. (2019) Evaluation of influence of principles involved in industry 4.0 over coal industries using TISM. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 244-245. ISBN 9781522590781

Brubaker, C. E. and Messersmith, P. B. and S. N., Aqida (2016) Biological Adhesion. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-22. ISBN 978-0-12-803581-8

C. I., Ukaegbu and S. R., Shah and R. O., Alara and O. A., Thonda (2023) Biosurfactants as Potential Antitumor Agents. In: Advancements in Biosurfactants Research. Springer International Publishing, pp. 439-460. ISBN 9783031216817

Chaker, Mhamdi and Al-Emran, Mostafa and Salloum, Said A. (2017) Text mining and analytics a case study from news channels posts on Facebook. In: Intelligent Natural Language Processing: Trends and Applications. Springer, Berlin, Germany, pp. 399-415. ISBN 9783319670560

Charissa, Endar and Lee, Khai Loon (2023) Improving inventory accuracy with internet of things: A case study in a manufacturing company. In: Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 13-24. ISBN 978-967-2831-89-1

Cheah, Cheng Teik and Fernando, Yudi (2018) Lean Logistics of the Transportation of Fresh Fruit Bunches (FFB) in the Palm Oil Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5422-5432. ISBN 9781522522553

Cheow, Kah Chun and Ahmad Shahrizan, Abdul Ghani and Ker, Shao Jiun and Nur Syazwani, Abdul Gani and Muhamad Izdhar, Zaki and Ahmad Fakhri, Ab. Nasir (2018) Electronic water balancing tool. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 573-589. ISBN 9789811087875

Chin, S. Y. and Nurwadiah, Azizan and Mohd Amirul Asyraf, Ahmad and Muhammad Ridzuan, Kamaruzaman (2019) Ion exchange resins catalysed esterification for the production of value added petrochemicals and oleochemicals. In: Applications of Ion Exchange Materials in Chemical and Food Industries. Springer Nature Switzerland, Berlin, Germany, pp. 75-98. ISBN 978-3-030-06085-5

Chin, Siew Choo and Doh, Shu Ing (2015) Behaviour of Reinforced Concrete Deep Beams with Openings in the Shear Zone. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 107-112. ISBN 978-967-0257-53-2

Chiroma, Haruna and Abdulkareem, Sameem and Muaz, Sanah Abdullahi and Abubakar, Adamu I. and Sutoyo, Edi and Mungad , Mungad and Saadi, Younes and Sari, Eka Novita and Tutut, Herawan (2015) An Intelligent Modeling of Oil Consumption. In: Advances in Intelligent Informatics. Advances in Intelligent Systems and Computing, 320 . Springer International Publishing, Switzerland, pp. 557-568. ISBN 978-3-319-11217-6 (print); 978-3-319-11218-3 (online)

Chong, Yie Kai and Liang, Yong Yeow and Lau, Woei Jye and Adolfo, Gustavo (2022) Modelling flow and mass transfer inside spacer-filled channels for reverse osmosis membrane modules. In: 60 Years of the Loeb-Sourirajan Membrane. Principles, New Materials, Modelling, Characterization, and Applications . Elsevier, India, pp. 413-432. ISBN 978-0-323-89977-2

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, M. Razman (2018) Machine learning approach in identifying speed breakers for autonomous driving: an overview. In: Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 409-424. ISBN 978-981-13-8323-6

Chuan, Zun Liang and Abraham Lim, Bing Sern and Tan, Chek Cheng and David Lau, King Luen and Japashov, Nursultan and Tan, Ee Hiae (2024) Empowering Industry 5.0: Nurturing STEM tertiary education and careers through additional mathematics. In: Utilizing Renewable Energy, Technology, and Education for Industry 5.0. IGI Global, Pennsylvania, USA, pp. 124-155. ISBN 9798369328149

Diyana, Kamarudin (2017) Cases on Sampling in the Business Setting. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 60-68. ISBN 978-967-2054-50-4

Diyana, Kamarudin (2020) Rollercoaster Ride Called Ph.D. In: PhD: The Amazing Journey. Penerbit UMP, Kuantan, Pahang, pp. 256-273. ISBN 978-967-2226-90-1

Doh, Shu Ing and Tan, Yeong Yu and Chin, Siew Choo and Ngien, S. K. (2018) The Potential of Blended Cement Mortar Brick Using Sewage Sludge and Eggshell Waste. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer, Singapore, pp. 317-326. ISBN 978-981-13-0074-5

Edriyana, Abd Aziz and Hasmanie, Abdul Halim and Fatimah, Ali (2018) Educating the Public Experiences - Bengkel Komuniti Air dan Kehidupan - Kem Pemimpin Muda Prihatin Air dan Program Reaching the Grassroots Peringkat Kebangsaan 2017 (Zon Timur). In: Drinking Water for the Society. Penerbit UniMAP, Kangar, Perlis, pp. 85-97. ISBN 9789675415706

El Sawy, Abdelrahman and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Mohd Azraai, M. Razman and Mohd Hasnun Ariff, Hassan and Abdul Aziz, Jaafar (2018) The Flexural Strength Prediction of Porous Cu-Sn-Ti Composites via Artificial Neural Networks. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 403-407. ISBN 978-981-13-8323-6

Elghdban, Mohamed Ghayth and Nurhidayah, Azmy and Adnan, Zulkiple and Al-Sharafi, Mohammed A. (2021) A systematic review of the technological factors affecting the adoption of advanced IT with specific emphasis on building information modeling. In: Recent Advances in Intelligent Systems and Smart Applications. Studies in Systems, Decision and Control, 295 . Springer Nature, Switzerland AG, pp. 29-42. ISBN 978-3-030-47411-9

Ellie Yi, Lih Teo and M. M., Yusoff and K. F., Chong (2015) 1-Pyrenebutyric Acid Functionalized Reduced Graphene Oxide (1-Pb-Rgo) Energy Storage. In: ICGSCE 2014. Proceedings of the International Conference on Global Sustainability and Chemical Engineering . Springer, Singapore, pp. 185-193. ISBN 978-981-287-504-4 (print); 978-981-287-505-1 (online)

Euniza, J. and Hasanan, Md. Nor and Putra Jaya, Ramadhansyah and Zaiton, Haron and Mastura, Bujang and Wan Nur Aifa, W. A. (2020) Waste tyre rubber application in semi-rigid and flexible pavement. In: Handbook of Research on Resource Management for Pollution and Waste Treatment. IGI Global, pp. 1-21. ISBN 9781799803690

F., Basrawi and Ibrahim, Thamir K. and Sathiyaseelan, Surendran S. and A. A., Razak (2018) Experimental investigation on performance of solar-powered attic ventilation. In: Sustainable Thermal Power Resources Through Future Engineering. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-19. ISBN 978-981-13-2968-5

F., Deraman and Ahmedov, Anvarjon A. (2017) On Almost Everywhere Covergence of Dyadic Fourier Series in L2. In: 2nd International Conference and Workshop on Mathematical Analysis 2016 (ICWOMA2016). AIP Publishing, Melville, NY, pp. 1-6. ISBN 978-0-7354-1461-7

F. M., Suhaimi and J. G., Chase and G. M., Shaw and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak (2016) Prediction of Sepsis Progression in Critical Illness Using Artificial Neural Network. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 127-132. ISBN 978-981-10-0265-6 (print); 978-981-10-0266-3 (online)

Fadzlina, Mohd Fadzil and Fernando, Yudi (2018) Exploring Drivers of Closed Loop Supply Chain in Malaysian Automotive Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5378-5387. ISBN 9781522522553

Fahad, Ahmed Mohammed and Ahmed, Abdulghani Ali and Alghushami, Abdullah H. and Alani, Sammer (2019) Detection of black hole attacks in mobile ad hoc networks via HSA-CBDS method. In: Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing, 866 . Springer Nature Switzerland, Berlin, Germany, pp. 46-55. ISBN 978-3-030-00979-3

Fahad, Ahmed Mohammed and Ahmed, Abdulghani Ali and M. N. M., Kahar (2019) Network Intrusion Detection Framework Based on Whale Swarm Algorithm and Artificial Neural Network in Cloud Computing. In: ICO 2018: Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing, 866 . Springer Nature, Switzerland, pp. 56-65. ISBN 978-3-030-00979-3

Fairuz, Jasmi and Fernando, Yudi (2018) Notions of Maritime Green Supply Chain Management. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5465-5475. ISBN 9781522522553

Faiz, Mohd Turan and Badrul, Omar (2015) Application of Integrated Fuzzy-AHP for Design Concept Evaluation: A Case Study on Mold Design Selection. In: The Malaysia-Japan Model on Technology Partnership : International Proceedings 2013 of Malaysia-Japan Academic Scholar Conference. Springer, Japan, pp. 101-113. ISBN 978-4-431-54438-8 (Print); 978-4-431-54439-5 (Online)

Faiz, Mohd Turan and Kartina, Johan and Chui Sheng, Tay (2018) Business Sustainability Performance (BSP) quantifier for Malaysia context. In: Lecture Notes in Mechanical Engineering. Springer Singapore, Singapore, pp. 373-384. ISBN 978-981-13-8323-6

Farah Ayuni, Fauzi and Zahari, Taha and Zakri, Ghazalli and Siregar, J. P. and Zulkifli, Ahmad@Manap and K., Kadirgama and Nasrul Hadi, Johari and Danial, Mohamed (2017) Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In: Advances in Human Factors in Sports and Outdoor Recreation. Advances in Intelligent Systems and Computing, 496 . Springer International Publishing, Switzerland, pp. 131-140. ISBN 978-3-319-41952-7

Farzad, Jaliliantabar and Abdul Adam, Abdullah and Carlucci, Paolo and Kumarasamy, Sudhakar (2022) Biofuel combustion generated particles analysis. In: Application of Clean Fuels in Combustion Engines. Energy, Environment, and Sustainability . Springer, Singapore, pp. 117-129. ISBN 978-981-16-8751-8

Fatchurrohman, Nanang and Azriee, Abdullah (2018) Surface roughness and wear properties of Al–Al2O3 metal matrix composites fabricated using friction stir processing. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 155-160. ISBN 9789811087875

Faysal, Atik and Ngui, Wai Keng and Lim, M. H. (2021) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Nature Singapore, Singapore, pp. 605-615. ISBN 978-981-33-4596-6 (Print) 978-981-33-4596-6 (Online)

Fazilah, Abdul Aziz and Zakri, Ghazalli and Mohd Jawad, Mohd Jamil and Awanis, Romli and N. M. Zuki, N. M. (2018) A knowledge-based ergonomics assessment system for WMSD prevention using AHP methodology. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 161-173. ISBN 9789811087875

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. and Amri, Isfar (2017) A Future Framework of Knowledge-Based Ergonomics Assessment System at Workplace in Automotive Assembly Plant. In: Advances in Social & Occupational Ergonomics. Advances in Intelligent Systems and Computing, 487 (Pt. II). Springer International Publishing, Switzerland, pp. 93-105. ISBN 978-3-319-41687-8 (Print); 978-3-319-41688-5 (Online)

Fazlul Rahman, Mohd Yunus and Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Leow, Pei Ling and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Nor Muzakir, Nor Ayob and Shahrulnizahani, Mohammad Din and Puspanathan, Jaysuman (2022) Hardware Development of Dual-Modality Tomography Using Electrical Resistance and Ultrasonic Transmission Tomography for Imaging Liquid and Gas. In: Control, Instrumentation and Mechatronics: Theory and Practice. Lecture Notes in Electrical Engineering, 921 . Springer, Singapore, pp. 793-808. ISBN 978-981-19-3922-8 (Printed); 978-981-19-3923-5(Online)

Fazlul Rahman, Mohd Yunus and Suzanna, Ridzuan Aw and Ruzairi, Abdul Rahim and Leow, Pei Ling and Mohd Hafiz, Fazalul Rahiman and Yasmin, Abdul Wahab and Nor Muzakir, Nor Ayob and Shahrulnizahani, Mohammad Din and Puspanathan, Jaysuman (2022) Hardware Development of Dual-Modality Tomography Using Electrical Resistance and Ultrasonic Transmission Tomography for Imaging Liquid and Gas. In: Control, Instrumentation and Mechatronics: Theory and Practice. Lecture Notes in Electrical Engineering, 921 (1). Springer, Malaysia, pp. 793-808. ISBN 978-981-19-3922-8 (Printed); 978-981-19-3923-5(Online)

Ferdous, I. U. and Alang, Nasrul Azuan and Alias, J. (2022) Prediction of the creep behavior of P91 Steel at 873 K using continuum damage mechanics model. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 359-371. ISBN 978-981-19-2890-1

Fernando, Yudi and Mohd Ridzuan, Darun and Al-haimi, Basheer and Daing Nasir, Ibrahim and Tieman, Marco and Fazeeda, Mohamad (2021) Role of Smart Contracts in Halal Supply Chain Management. In: Encyclopedia of Organizational Knowledge, Administration, and Technology. IGI Global, pp. 2497-2504. ISBN 9781799834748

Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan and Mashitah, Mohd Yusoff (2020) Plant extracts: Nanoparticle sources. In: Phytonanotechnology: Challenges and Prospects consolidates. Elsevier, Netherlands, pp. 41-49. ISBN 978-0-12-822348-2

Gaanty Pragas, Maniam and Natanamurugaraj, Govindan and Palanisamy, Karthick Murugan and Kuppusamy, Palaniselvam and Mohd Hasbi, Ab. Rahim (2023) Plant polysaccharides for protein binding. In: Plant Polysaccharides as Pharmaceutical Excipients. Elsevier, Amsterdam, Netherlands, pp. 415-428. ISBN 978-0-323-90780-4

Gan, Vi Vi and Niirmel, Ranjanendran and Siti Noor Zuliana and Addie Irawan, Hashim (2018) PSpHT-II: a water strider-like robot with cylindrical footpad. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering, 538 . Springer Singapore, Singapore, pp. 99-112. ISBN 978-981-13-3708-6

Gani, Anisha Banu Dawood and Fernando, Yudi (2018) Concept and Practices of Cyber Supply Chain in Manufacturing Context. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5306-5316. ISBN 9781522522553

Ghazali, Norhaiza and Muthusamy, Khairunisa and Md Jaafar, Mohd Faizal and Shahid, Khairul Anuar and Zailan, Roziah and Zul Afkar Mohamed, Muhamad Jafri (2023) Sand cement brick incorporating palm oil clinker as partial replacement for fine aggregate. In: Advanced Materials, Technologies and Technological Processes. Key Engineering Materials, 942 . Trans Tech Publications, Switzerland, Switzerland, pp. 124-128. ISBN 1662-9795

Goh, Ming Qian and Pebrianti, Dwi and Bayuaji, Luhur and Nor Rul Hasma, Abdullah and Mahfuzah, Mustafa and Mohammad, Syafrullah and Indra, Riyanto (2018) Waypoint navigation of quad-rotor MAV using Fuzzy-PID control. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 271-284. ISBN 9789811087875

Goh, Ming Qian and Pebrianti, Dwi and Luhur, Bayuaji and Rosdiyana, Samad and Mahfuzah, Mustafa and Mohammad, Syafrullah (2018) Adaptive fuzzy-PID controller for quad-rotor MAV with mass changes. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 257-269. ISBN 978-981-13-3708-6

Gupta, Arun and Alashwal, B. Y. and Bala, Md. Saad and Ramakrishnan, N. (2020) Keratin-based bioplastic from chicken feathers. In: Industrial Applications of Biopolymers and their Environmental Impact. Engineering & Technology, Physical Sciences . Taylor & Francis, Boca Raton. ISBN 9781315154190

Habeeb, Omar Abed and K., Ramesh and Sethupathi, Sumathi and R. M., Yunus (2017) Optimization and Characterization Study of Preparation Factors of Activated Carbon Derived from Coconut shell to Remove of H2S from Wastewater. In: Activated carbon: prepared from various precursors. Ideal International E-Publication, India, pp. 44-61. ISBN 978-93-86675-07-1

Hafizoah, Kassim and Asiah, Kassim (2019) Embracing the Internet of Things for Language Education: Are We There Yet? In: Industrial Revolution 4.0: A Future Outlook. UMP Press, Kuantan, Pahang, pp. 86-105. ISBN 978-967-2226-50-5

Hafizoah, Kassim and Fatimah, Ali and Nik Aloesnita, Nik Mohd Alwi and Norrihan, Sulan and Nor Suhardiliana, Sahar and Noor Raha, Mohd Radzuan and Suriya Kumar, Sinnadurai (2018) English Proficiency Test on Admission: Development, Implementation, Challenges and Future Directions. In: Teaching And Learning English In Malaysian Higher Education: Sharing Experience To Improve Practice. UM Press, Kuala Lumpur, pp. 175-195. ISBN 978-967-488-028-6

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hajar, Mohamed A. and Daing Nasir, Ibrahim and Al-Sharafi, Mohammed A. (2019) Value Innovation in the Malaysian Telecommunications Service Industry: Case Study. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT 2018). Advances in Intelligent Systems and Computing, 843 . Springer Nature, Switzerland, pp. 892-901. ISBN 978-3-319-99007-1

Hamzah, Ahmad and Nur Aqilah, Othman and Mohd Mawardi, Saari and Mohd Syakirin, Ramli (2018) Investigating state covariance properties during finite escape time in H∞ filter SLAM. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 271-283. ISBN 978-981-13-3708-6

Hanis Nadiah, Ruslan and Tanash, Alaa Omar and Khairunisa, Muthusamy and Low, Wee Yang and Mohamed, A.Ismail (2023) Properties of sustainable concrete containing recycled fine aggregate as partial sand replacement. In: Advanced Materials, Technologies and Technological Processes. Key Engineering Materials, 942 . Trans Tech Publications Ltd, Switzerland, pp. 129-135. ISBN 978-3-0364-1270-2

Hao, Mok Ren and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Ahmad Nor Kasruddin, Nasir (2018) Performance evaluation of random search based methods on model-free wind farm control. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 657-670. ISBN 9789811087875

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris (2017) A Review on Effect of Surface Finish and Cooling Rate on Solder Joint Reliability. In: High Performance and Optimum Design of Structures and Materials II. WIT Transactions on The Built Environmen. WIT Press, pp. 1-3. ISBN 9781784661434

Hartwig, J. B. and Hartwig, J. and S. N., Aqida (2016) X-Ray Topography. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-9. ISBN 978-0-12-803581-8

Haziman, Zakaria and Diyana, Kamarudin, and Faiz, Azizul and Mohammad Fitri, Idrus and Nor Rokiah Hanum, Md Haron and Norhana Mohd, Aripin (2023) Automatic Vehicle Location (AVL): Evaluation on the Punctuality Index of City Public Bus Service. In: Intelligent Manufacturing and Mechatronics. Lecture Notes in Electrical Engineering, 988 . Springer, Singapore, pp. 75-86. ISBN 978-981-19-8702-1

Hazri Dahalan, Razip and Abu Zaharin, Ahmad (2020) Voltage Sag immunity testing for AC contactors in industrial environment. In: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering, Kuantan, Pahang, Malaysia, 29th July 2019. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 1-11. ISBN 978-981-15-2316-8 (Print); 978-981-15-2317-5 (Online)

Hazriq Izzuan, Jaafar and Mohd Ashraf, Ahmad and Rozaida, Ghazali and A. M., Kassim (2016) Linear and Nonlinear Dynamic Model of a Gantry Crane System. In: Proceedings of Mechanical Engineering Research Day 2016. Centre for Advanced Research on Energy (CARe), Universiti Teknikal Malaysia Melaka, pp. 41-42. ISBN 978-967-0257-70-9 (online)

Hendayani, Ratih and Fernando, Yudi (2018) Missing Part of Halal Supply Chain Management. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5456-5464. ISBN 9781522522553

Herzallah, Fadi A. T. and Al-Sharafi, Mohammed A. and Alajmi, Qasim and Muriati, Mukhtar and Ruzaini, Abdullah Arshah and Eleyan, Dirar (2018) Conceptualizing a Model for the Effect of Information Culture on Electronic Commerce Adoption. In: Recent Trends in Data Science and Soft Computing: Proceedings of the 3rd International Conference of Reliable Information and Communication Technology (IRICT 2018). Springer, Switzerland, pp. 861-870. ISBN 978-3-319-99007-1

Herzallah, Fadi A. T. and Al-Sharafi, Mohammed A. and Alajmi, Qasim and Muriati, Mukhtar and Ruzaini, Abdullah Arshah and Eleyan, Dirar (2019) Conceptualizing a model for the effect of information culture on electronic commerce adoption. In: Recent Trends in Data Science and Soft Computing: IRICT 2018. Advances in Intelligent Systems and Computing, 843 . Springer, Cham, pp. 861-870. ISBN 978-3-319-99007-1

Ho, Cheong Lee and Noraziah, Ahmad and Herawan, Tutut (2017) The Backbone of Key Successful Branding Strategies in the 21st Century: Innovation in Design Technology, Decision Making on Product Quality, and Collaborative Communications. In: Artificial Intelligence: Concepts, Methodologies, Tools, and Applications. Information Science Reference, pp. 717-758. ISBN 9781522517597

Hoh, Rui Bin and Nasrul Azuan, Alang and M. I., M. Ramli and J., Alias and A. M., Romy Improvement of roof shield design using TRIZ method. In: UNSPECIFIED Springer.

Hon, Mei Kie and Mohd Saberi, Mohamad and Abdul Hakim, Mohamed Salleh and Choon, Yee Wen and Muhammad Akmal, Remli and Mohd Arfian, Ismail and Omatu, Sigeru and Corchado, Juan Manuel (2018) A hybrid of Simple Constrained artificial bee colony algorithm and flux balance analysis for enhancing Lactate and Succinate in Escherichia Coli. In: Practical Applications of Computational Biology and Bioinformatics, 12th International Conference. Advances in Intelligent Systems and Computing . Springer Nature Switzerland, pp. 1-8. ISBN 978-3-319-98702-6

Hoo, Yee Hui and Fernando, Yudi (2018) Improving Competencies for the Courier Service Industry in Malaysia. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 2802-2809. ISBN 9781522522553

Idris, Idasuzana and Idris, Mohd Awang and Muhamad Tamyez, Puteri Fadzline and Zynuddin, Siti Nadya (2022) Kajian Longitudinal. In: Metodologi kuantitatif dan kualitatif dalam sains sosial. Penerbit Universiti Malaya, Universiti Malaya, Kuala Lumpur, pp. 59-84. ISBN 978-967-488-230-3

Imran Edzereiq, Kamarudin and M. A., Ameedeen and Zafril Rizal, M Azmi (2015) Experimental Analysis on Available Bandwidth Estimation Tools for Wireless Mesh Network. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer, Switzerland, pp. 525-535. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Ismail, Abustan and Mohd Yuhyi, Mohd Tadza and Mohd Tadza, Abdul Rahman (2015) Feasability Study on Phytoremediation in Treatment of Open Landfill Leachate. In: Ecological Modelling for Sustainable Development. Proceedings Series . Penerbit Universiti Sains Malaysia, Penang. ISBN 978-983-861-501-3

Ismail, Ibrahim and Zuwairie, Ibrahim and Hamzah, Ahmad and Zulkifli, Md. Yusof (2016) An Assembly Sequence Planning Approach with a Multi-State Particle Swarm Optimization. In: Trends in Applied Knowledge-Based Systems and Data Science. Lecture Notes in Computer Science, 9799 . Springer International Publishing, Switzerland, pp. 841-852. ISBN 978-3-319-42006-6

Ismayadi, Ismail and Idza Riati, Ibrahim and Rodziah, Nazlan (2017) Evolution of Magnetic Properties in Ferrites: Trends of Single-Sample and Multi-Sample Sintering. In: Sintering of Functional Materials. InTech, pp. 77-103. ISBN 978-953-51-3757-3

Jaber, Aws Naser and Mohamad Fadli, Zolkipli and Shakir, Hasan Awni (2018) Host Based Intrusion Detection and Prevention Model Against DDoS Attack in Cloud Computing. In: Advances on P2P, Parallel, Grid, Cloud and Internet Computing: Proceedings of the 12th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC-2017). Lecture Notes on Data Engineering and Communications Technologies, 13 . Springer, Cham, Switzerland, pp. 241-252. ISBN 978-3-319-69835-9

Jackson, Duncan and Mohd Hanafiah, Ahmad and Grace, Gary and Yoon, Jeeyun (2011) An alternative take on AC research and practice: Task-based Assessment Centres. In: Assessment Centres and Global Talent Management. Taylor & Francis, Surrey, pp. 33-47. ISBN 978-1409403869

Jadhav, Pramod and Bin Khalid, Zaied and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd Nasrullah, Zulkifli (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors: Post-Covid19 Waste Management Approach. Elsevier, India, pp. 185-206. ISBN 978-0-323-89848-5

Jadhav, Pramod and Zaied, Khalid and Mishra, Puranjan and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Challenges and emerging approaches in life cycle assessment of engineered nanomaterials usage in anaerobic bioreactor. In: Techno economics and Life Cycle Assessment of Bioreactors Post Covid19 Waste Management Approach. Post-Covid19 Waste Management Approach . Elsevier, U.K., pp. 207-222. ISBN 978-0-323-89848-5

Jailani, Salihon and N., Zainol (2012) Kinetic Modeling of Biogas Generation from Banana Stem Waste. In: Analysis and Design of Biological Materials and Structures. Advanced Structured Materials, 14 . Springer , Berlin Heidelberg, pp. 175-184. ISBN 978-3-642-22130-9 (print); 978-3-642-22131-6 (online)

Jalal, Hanaysha and Haim, Hilman and Zahari, Abu Bakar and Lee, Khai Loon (2019) Determinants of Customers' Perceived Value in the Fast Food Industry for Global Brands in Malaysia. In: Dynamic Perspectives on Globalization and Sustainable Business in Asia. IGI Global, p. 225. ISBN 9781522570950

Jasni, Mohamad Zain and Qin, Hongwu and Ma, Xiuqin and Herawan, Tutut (2013) An Improved Genetic Clustering Algorithm for Categorical Data. In: Emerging Trends in Knowledge Discovery and Data Mining: PAKDD 2012 International Workshops: DMHM, GeoDoc, 3Clust, and DSDM, Kuala Lumpur, Malaysia, May 29 – June 1, 2012, Revised Selected Papers. Lecture Notes in Computer Science, 7769 (Lectur). Springer, Berlin Heidelberg, pp. 100-111. ISBN 978-3-642-36778-6

Ji, Yuanfa and Fan, Z . and Sun, X. and Wang, S. and Yan, S. and Wu, S. and Fu, Q. and Kamarul Hawari, Ghazali (2020) Robust multi-user detection based on hybrid grey wolf optimization. In: Cognitive internet of things : frameworks, tools and aplications. Studies in Computational Intelligence, 810 (810). Springer Nature Switzerland, pp. 237-249. ISBN 978-3-030-04946-1

Jolius, Gimbun and Law, Woon Phui and Anandharamakrishnan, C. (2017) Computational fluid dynamics modelling of the dairy drying processes. In: Handbook of Drying for Dairy Products. Wiley-Blackwell, pp. 179-201. ISBN 978-1-118-93049-6

Jolius, Gimbun and Ramakrishnan, Ramprasath and Ramakrishnan, Praveen and Ranganathan, Balu (2022) Needleless Electrospun Nanofibers for Drug Delivery Systems. In: Electrospun Nanofibers from Bioresources for High-Performance Applications. CRC Press, 6000 Broken Sound Pkwy NW, Boca Raton, FL 33487, USA, pp. 87-104. ISBN 9781003225577

Jolius, Gimbun and Sook, Fun Pang and M. M., Yusoff (2019) Orthosiphon stamineus (Java Tea). In: Nonvitamin and Nonmineral Nutritional Supplements. Academic Press, London, United Kingdom, 327 - 333. ISBN 9780128124918

Jose, Rajan and Al-Douri, Yarub (2022) Introduction to quantum dots. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology: Fundamentals and Application. Woodhead Publishing Series in Electronic and Optical Materials . Elsevier, pp. 579-599. ISBN 978-0-323-85457-3

Jun Wei Roy, Chong and Zatul Iffah, Mohd Arshad and Kit Wayne, Chew and Pau Loke, Show (2023) Polymer-salt interaction. In: Principles of Multiple-Liquid Separation Systems Interaction, Application and Advancement. Elsevier, pp. 21-44. ISBN 9780323917285

Junaida, Sulaiman and Siti Hajar, Wahab (2018) Heavy Rainfall Forecasting Model Using Artificial Neural Network for Flood Prone Area. In: IT Convergence and Security 2017. Lecture Notes in Electrical Engineering, 449 . Springer, Singapore, pp. 68-76. ISBN 978-981-10-6451-7

June Poh, Kim Tam and Fernando, Yudi (2018) Ecological Performance as a New Metric to Measure Green Supply Chain Practices. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5357-5366. ISBN 9781522522553

K., Kadirgama (2017) Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel. In: Engineering and Innovative Materials V. Trans Tech Publications Ltd, pp. 152-158. ISBN 9783038357704

K., Sudhakar and Soni, Ruma Arora (2017) Carbon sequestration through solar bioreactors: industrial strategies. In: Carbon Utilization. Green Energy and Technology . Springer, Singapore, pp. 143-155. ISBN 978-981-10-3352-0

K. L., Lee and G., Nawanir and J. K., Cheng and Haitham M., Alzoubi and Muhammad, Alshurideh (2023) Educational Supply Chain Management: A View on Professional Development Success in Malaysia. In: Book cover Book cover The Effect of Information Technology on Business and Marketing Intelligence Systems. Studies in Computational Intelligence, 1056 . Springer Science and Business Media Deutschland GmbH, pp. 2473-2490. ISBN 9780323852784

Kabir, M. Nomani and Alginahi, Yasser M. (2019) Introduction. In: Authentication Technologies for Cloud Computing, IoT and Big Data. The Institution of Engineering and Technology (IET), pp. 1-12. ISBN 9781785615573

Kamal Z., Zamli and Ahmed, Bestoun S. and Mahmoud, Thair and Afzal, Wasif (2018) Fuzzy Adaptive Tuning of a Particle Swarm Optimization Algorithm for Variable-Strength Combinatorial Test Suite Generation. In: warm Intelligence Volume 3: Applications. The Institution of Engineering and Technology, London, pp. 1-21. ISBN 978-1-78561-631-0

Kamal Z., Zamli and Alsewari, Abdulrahman A. and Younis, Mohammed I. (2014) T-Way Testing Strategies: Issues, Challenges, and Practices. In: Handbook of Research on Emerging Advancements and Technologies in Software Engineering. IGI Global, Hershey, PA, USA, pp. 419-431. ISBN 9781466660267 (print); 9781466660274 (online) (Unpublished)

Kamarul Hawari, Ghazali and Zuwairie, Ibrahim and Faradila, Naim and Kian, Sheng Lim and Salinda, Buyamin and Anita, Ahmad and Sophan Wahyudi, Nawawi and Norrima, Mokhtar (2015) An Improved VEPSO Algorithm for Multi-objective Optimisation Problems. In: The Malaysia-Japan Model on Technology Partnership. Springer, Japan, pp. 253-263. ISBN 978-4-431-54438-8 (print); 978-4-431-54439-5 (online)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof (2020) Red and blue channels correction based on green channel and median-based dual-intensity images fusion for turbid underwater image quality enhancement. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019, NUSYS'19. Lecture Notes in Electrical Engineering, 666 (666). Springer, Singapore, pp. 73-86. ISBN 978-981-15-5280-9

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2018) Deep underwater image enhancement through integration of red color correction based on blue color channel and global contrast stretching. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering, 538 (9). Springer Singapore, Singapore, pp. 35-44. ISBN 978-981-13-3708-6

Kaminsky, Walter and Boggioni, Laura and Tritto, Incoronata and S. N., Aqida (2019) Cycloolefin Polymerization. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, Netherlands, pp. 843-873. ISBN 978-0-12-803581-8

Kangxing, Dong and Swan, Chiam Kee and Hafizoah, Kassim (2022) An Investigation on Online Metacognitive Reading Strategies Used by Malaysian Engineering Undergraduates. In: Spearheading Excellence: in Humanities, Social Sciences and Business Management Research. Penerbit UMP, Kuantan, Pahang, pp. 37-52. ISBN 978-967-2831-36-5

Khairatun Najwa, Mohd Amin (2022) 13 - Enhanced thermal stability of cellulose nanocrystals for processing polymer nanocomposites at a high temperature. In: Industrial Applications of Nanocellulose and Its Nanocomposites. A volume in Woodhead Publishing Series in Composites Science and Engineering . Elsevier, New Delhi, India, pp. 327-335. ISBN 978-0-323-89909-3 (Printed); 978-0-323-89917-8 (Online)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2018) The effect of argon shielding gas flow rate on welded 22MNBS boron steel using low power fiber laser. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Cham, pp. 39-48. ISBN 978-981-10-9040-0

Khairul Shah, Affendy Yakof and Nor Fazlin, Zabudin and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Development of 3D printed heart model for medical training. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 109-116. ISBN 9789811087875

Khairunisa, Muthusamy and Wong, Wang Hui and Nabilla, Mohamad and Rajan, Jose and Budiea, Ahmed Mokhtar Albshir and Abdul Majeed, Anwar P. P. and Kırgız, Mehmet Serkan (2023) Properties of concrete containing coal bottom ash as hydraulic binder substitution. In: Advance Upcycling of By-products in Binder and Binder-Based Materials. Elsevier Ltd, United Kingdom, pp. 243-250. ISBN 978-0-323-99804-8

Khilji, Irshad Ahamad and Pathak, Sunil and Siti Nadiah, Mohd Saffe and Biswas, Shatarupa and Singh, Yogesh (2021) Opportunities and ehallenges in Nanoparticles Formation by Electrical Discharge Machining. In: Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 203-210. ISBN 978-981-15-7711-6

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Microbial Fuel Cells: Types and Applications. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 367-384. ISBN 978-3-319-49595-8

Kumar, Senthil (2021) Biting the silver bullet. In: PhD: The Amazing Journey. UMP Press, Kuantan, Pahang, pp. 201-212. ISBN 978-967-2226-90-1

Kumaran, Vikniswari Vija and Haron, Nazatul Faizah and Ridzuan, Abdul Rahim and Saudi, Nur Surayya and Sapuan, Noraina Mazuin (2022) Evaluating climate change towards sustainable development. In: Handbook of Energy and Environmental Security. Academic Press, Elsevier, United Kingdom, pp. 377-397. ISBN 978-0-12-824084-7

L. A., Aziz and N. S., Arifin and S. M., Zokri and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and I., Waini and S., Shafie (2017) Mathematical Modelling on Convective Boundary Layer of Non-Newtonian Micropolar Viscoelastic Fluid. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 440-441. ISBN 9789670257884

Lee, Chia Kuang and Wong, Wen Nee and Nurhaizan, Mohd Zainudin and Ahmad Huzaimi, Abd Jamil (2023) Understanding the causes and effects of low-risk management: implementation in projects using the DEMATEL algorithm. In: Research Handbook on Project Performance. Edward Elgar Publishing Ltd, U.K., pp. 92-114. ISBN 9781802207613 (Online), 978-1802207606 (Printed)

Lee, Chia Kuang and Yiu, Tak Wing and Cheung, Sai On (2022) Intervening decision-making in using alternative dispute resolutions: A parsimonious intervention model. In: Construction Dispute Research Expanded. Springer Tracts in Civil Engineering . Springer Nature, Switzerland AG, pp. 369-398. ISBN 978-3-030-80256-1

Lee, Khai Loon (2020) Your attitude determines your future. In: The PhD Journey. Penerbit UMP, Kuantan, Pahang, pp. 113-129. ISBN 978-967-2226-90-1

Lee, Khai Loon and Norhuda Dalya, Ab Razak (2020) The effect of information technology capabilities and individual performance on organizational performance in Malaysia manufacturing industry. In: Service and Operation Management - Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 20-30. ISBN 978-967-2916-51-2

Lee, Khai Loon and Puteri Nurhazira, Romzi (2021) Improving canteen's service and operations management: A case study using modelling and simulation approach. In: Service and Operation Management. Penerbit UTHM, Batu Pahat, Johor, pp. 51-59. ISBN 978-967-2817-33-8 (Unpublished)

Lee, Khai Loon and Puteri Nurhazira, Romzi (2021) Improving canteen's service and operations management: A case study using modelling and simulation approach. In: Service and Operation Management (Series 3). Series 3 . Penerbit UTHM, Batu Pahat, Johor, pp. 51-59. ISBN 978-967-2817-33-8

Lee, Lay Khoon and Liew, Siau-Chuin and Thong, Weng Jie (2015) A Review of Image Segmentation Methodologies in Medical Image. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, Pt. II (315). Springer, Switzerland, pp. 1069-1080. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Li, Zhenya and Sinnott, Richard O. and Choon, Yee Wen and Sjaugi, Muhammad Farhan and Mohd Saberi, Mohamad and Safaai, Deris and Suhaimi, Napis and Omatu, Sigeru and Corchado, Juan Manuel and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) Exploring the High Performance Computing-Enablement of a Suite of Gene-Knockout Based Genetic Engineering Applications. In: 10th International Conference on Practical Applications of Computational Biology & Bioinformatics. Advances in Intelligent Systems and Computing, 477 . Springer International Publishing, Switzerland, pp. 133-139. ISBN 978-3-319-40125-6

Lichtfouse, Eric and Morin-Crini, Nadia and Fourmentin, Marc and Zemmouri, Hassiba and Nascimento, Inara Oliveira Carmo do and Queiroz, Luciano Matos and Mohd Yuhyi, Mohd Tadza and Picos-Corrales, Lorenzo A. and Pei, Haiyan and Wilson, Lee D. and Crini, Grégorio (2019) Chitosan for Direct Bioflocculation Processes. In: Sustainable Agriculture Reviews 36. Springer, Cham, pp. 335-380. ISBN 978-3-030-16581-9

Liew, Yu Xuan and Khong, Sheh Ching and Yee, Jia Jun and Chin, Siew Choo and Tee, Kong Fah (2023) Bamboo fibre composites: Potential and challenges. In: Cement and Concrete: Design, Performance and Structure. Construction Materials and Engineering . Nova Science Publishers, Hauppauge, NY, pp. 213-255. ISBN 979-8-88697-831-5

Lim, H. Y. and Muhammad Aizzat, Zakaria (2018) Trajectory tracking analysis of planar end-effector upper limb rehabilitation device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 183-195. ISBN 9789811087875

Ling, Jin Kiong and Jose, Rajan (2021) Metal oxide nanofibers in solar cells. In: Metal Oxide-Based Nanofibers and Their Applications. Metal Oxides . Elsevier Inc., UK, pp. 277-300. ISBN 978-0-12-820629-4

Liyana, Mohamed Yusof and Shaliha, Minhad and Noor Asiah, Mohamad and Nurhidayah, Azmy (2021) Assessing Pedestrian Facilities for the Blind in the Urban Environment of an Emerging Economy. In: UMP Research Series: Construction Engineering and Management (Vol.1). Penerbit UMP, Kuantan, Pahang, pp. 101-109. ISBN 978-967-2054-75-7

M., Azuddin and Zahari, Taha (2016) Micro Plastic Part Filling Capabilities through Simulation and Experiment A Case Study on Micro Gear Shape. In: Comprehensive Materials Finishing. Elsevier , pp. 441-465. ISBN 978-0-12-803249-7

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2013) Characteristics of Welded Thin Sheet AZ31 Magnesium Alloy. In: Experimental and Numerical Investigation of Advanced Materials and Structures. Advanced Structured Materials, 41 . Springer International Publishing, pp. 147-160. ISBN 978-3-319-00505-8 (print), 978-3-319-00506-5 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

M., Waris (2017) Case on Managing Multi-Projects in Process Industry. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 18-21. ISBN 978-967-2054-50-4

M., Waris and Panda, Sitansu (2017) Case on Integrated Time and Cost Monitoring of Construction Projects. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 22-25. ISBN 978-967-2054-50-4

M. A, Muhammed Nor and A. F., Yusop and M. N., Omar and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Alternative railway tools and sustainability in RAMS: A review. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering book series (LNEE), 882 . Springer, Singapore, pp. 541-554. ISBN 978-981-19-1576-5 (Printed); 978-981-19-1577-2(Online)

M. Amirul, Islam and Ahasanul, Karim and Puranjan, Mishra and C. K. M., Faizal and Khan, Maksudur R. and Abu, Yousuf (2019) Role of biocatalyst in microbial fuel cell performance. In: Waste to Sustainable Energy MFCs – Prospects through Prognosis. CRC Press, Boca Raton, Florida, pp. 86-87. ISBN 9781138328211 (hbk.); 9780429448799 (online)

M. F., Masrom and N. M., Ghani and Nurul Fadzlina, Jamin and N. A. A, Razali (2018) Stabilization control of a two-wheeled triple links inverted pendulum system with disturbance rejection. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 151-159. ISBN 978-981-13-3708-6

M. F. F. A., Hamidi and W. S., Wan Harun (2017) Evaluation of mechanical properties for open cellular structure 17-4 PH stainless steel alloy fabricated by selective laser melting process. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 122-123. ISBN 9789670257884

M. M., Razali and M. F. F., Ab Rashid and M.R.A., Make (2017) Optimization of mixed-model assembly line balancing problem with resource constraints. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 115-117. ISBN 9789670257884

M. M., Yusoff and Januarius, Gobilik and Poulsen, Axel Dalberg and Magintan, David (2003) Gingers at the Dagat Limestone Ridge, Tabin Wildlife Reserve. In: Tabin Limestone Scientific Expedition 2000. Universiti Malaysia Sabah, Kota Kinabalu, Sabah, pp. 49-59. ISBN 978-9832369080

M. R. M., Rejab and Mohammad Hazim, Mohamad Hamdan and Quanjin, Ma and Siregar, J. P. and Bachtiar, Dandi and Muchlis, Yusrizal (2020) Historical development of hybrid materials. In: Encyclopedia of Renewable and Sustainable Materials. Elsevier, pp. 445-455. ISBN 978-0-12-813196-1

M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Hydrolysis of Lignocellulosic Biomass for Recovering Hemicellulose: State of the Art. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 73-106. ISBN 978-3-319-49595-8

M. S., Jadin and Soib, Taib and Shahid, Kabir (2012) Thermal Imaging for Enhancing Inspection Reliability: Detection and Characterization. In: Infrared Thermography. InTech , Croatia, pp. 209-236. ISBN 978-953-51-0242-7

M. S. A., Noman Ranak and Saiful Azad, B. M. F and Karnal, Ruhee and N. Nourin, Nisa and Nazrul, Kabir and M. M., Rahman and Kamal Z., Zamli (2018) IPTV network security: threats and countermeasures. In: IPTV delivery networks: next generation architectures for live and video on demand services. John Wiley & Sons, New Jersey, pp. 203-222. ISBN 9781119397939

Ma, Quanjin and Rejab, M. R. M. and Hanon, Muammel M. and Idris, Mat Sahat and Siregar, J. P. (2021) 3D-Printed Spherical-Roof Contoured-Core (SRCC) composite sandwich structures for aerospace applications. In: High-Performance Composite Structures. Composites Science and Technology . Springer, Singapore, pp. 75-91. ISBN 978-981-16-7377-1

Mahamarowi, Omar and Mohd Faizal, Jani and Mohd. Jais Anuar, Ahmad and Ahmad Irfan, Ikmal Hisham (2016) Sikap Dan Peranan Pencerap Muslim Semasa Gerhana Menurut Hadith. In: Prospektus Gerhana Matahari Penuh Palembang 2016. Salam Sdn. Bhd., Selangor, pp. 1-10.

Maizatul Farhain, Ismail (2016) Peranan Bioteknologi dalam Konteks Pembangunan Negara. In: Sains-Lah! Catatan Saintis Muda. Simptomatik Press, pp. 1-17. ISBN 9789672011132

Manda, M. S. and M. R. M., Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) Review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure. Materials and Applications, 1 . Springer Link, Singapore, pp. 43-58. ISBN 978-981-16-6382-6 (Printed); 978-981-16-6383-3 (Online)

Mansor, Sulaiman and Hasan, Ahmad and Ahmad Irfan, Ikmal Hisham and Tuan Sidek, T. M. and Husna, Hashim (2018) Tanggungan isteri terhadap sebahagian nafkah keluarga dan hubungannya dengan tolakan dalam pengiraan zakat pendapatan: suatu tinjauan menerusi perspektif Fiqh. In: E-Book of Masjid, Zakat & Wakaf 2018. Masjid al-Azhar, Kolej Universiti Islam Antarabangsa Selangor, Kajang, Selangor, pp. 113-121. ISBN E-ISBN: 978-967-13087-4-5

Mansor, Sulaiman and Hasan, Ahmad and Husna, Hashim (2016) Keperluan Terhadap Penentuan Had Al-Kifayah Kepada Pembayar Zakat Pendapatan. In: Isu Kontemporari Had Kifayah Zakat Dan Pengurusan Di Malaysia. Penerbit USIM, pp. 39-54. ISBN 978-967-440-320-1

Marlina, Yakno and Junita, Mohd Saleh and Bakhtiar, Affendi Rosdi (2015) Grayscale and Binary Image Enhancement of Hand Vein Images to Aid Peripheral Intravenous Access. In: New Developments In Biology, Biomedical & Chemical Engineering And Materials Science. Recent Advances in Biology and Biomedicine Series (8). INASE, Austria, pp. 60-67. ISBN 978-1-61804-284-2

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

Mas Ayu, Hassan and Zubaidah, Zamri and Rosdi, Daud and Norizah, Redzuan and Izman, Sudin (2022) The Effect of PLA/HA Coating Thickness on Crack Formation and Corrosion Performance. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer, Cham, Cham, pp. 47-53. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Mohd Azraie, Mohd Azmi and Mohd Noor, Ahmad and Nur Akmal, Abd. Rahman and Khairil Anuar, Khairi (2021) Near-infrared spectroscopy for ganoderma boninense detection in oil palm: An outlook. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 117-126. ISBN 978-981-33-4597-3

Masri, K. A. and Putra Jaya, Ramadhansyah and Chin, S. C. and Wan Ibrahim, Mohd Haziman (2022) Prediction of rutting resistance of porous asphalt mixture incorporating nanosilica. In: Risk, Reliability and Sustainable Remediation in the Field of Civil and Environmental Engineering. Elsevier Inc., Amsterdam, Netherlands, pp. 477-486. ISBN 9780323856980

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Cionita, Tezara (2017) The Mechanical Properties of Alkaline Treated Pineapple Leaf Fibre to Reinforce Tapioca based Bioplastic Resin Composite. In: Manufacturing Sciences and Technologies VII. Trans Tech Publications Ltd, pp. 66-70. ISBN 9783038357322

Mattei, G. and Aqida, S.N. (2024) Optical properties of surface enhanced Raman scattering. In: Encyclopedia of Condensed Matter Physics (Second Edition). Elsevier, pp. 728-738. ISBN 978-0-323-91408-6

Mattei, G. and S. N., Aqida (2016) Optical Properties of Surface Layers Enhanced Raman Scattering. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-11. ISBN 978-0-12-803581-8

Maziyah, Mat Noh and Mohd Rizal, Arshad and Rosmiwati, Mohd Mokhtar and Zainah, Md. Zain (2018) Integral super twisting sliding mode control (ISTSMC) application in 1DOF internal mass autonomous underwater glider (AUG). In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 305-325. ISBN 9789811087875

Mazlan, Abu Seman and Yuantian, Feng and Z. M., Jaini (2013) Computational modelling of reinforced concrete wall subjected to transformer tank rupture. In: Research and Applications in Structural Engineering, Mechanics and Computation. CSC Press, pp. 1-5.

Mazlan, Abu Seman and Zainorizuan, Mohd Jaini and Shahrul Niza, Mokhatar and Yuantian, Feng (2015) 2D Multi-scale Simulation and Homogenization of Foamed Concrete Containing Rubber Bars. In: InCIEC 2014:Proceedings of the International Civil and Infrastructure Engineering Conference 2014. Springer, Singapore, pp. 625-638. ISBN 978-981-287-289-0 (print); 978-981-287-290-6 (online)

Mazlina, Abdul Majid and Fakhreldin, Mohammed Adam Ibrahim and Kamal Z., Zamli (2016) Comparing Discrete Event and Agent Based Simulation in Modelling Human Behaviour at Airport Check-in Counter. In: Human-Computer Interaction. Theory, Design, Development and Practice. Lecture Notes in Computer Science, 9731 . Springer, Switzerland, pp. 510-522. ISBN 978-3-319-39510-4

Mervin Ealiyas, Mathews and Anandu E., Shaji and N., Anand and A. Diana, Andrushia and Siew Choo, Chin and Eva, Lubloy (2023) IoT-based BIM integrated model for energy and water management in smart homes. In: Intelligent Edge Computing for Cyber Physical Applications. Elsevier, pp. 45-66. ISBN 9780323994125

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari (2022) Fatigue Detection on glass fibre reinforced polymer material using Fiber Bragg Grating sensor. In: Structural Integrity Cases in Mechanical and Civil Engineering. Structural Integrity, 23 (23). Springer, Cham, Springer. Cham, pp. 115-125. ISBN 978-3-030-85645-8 (Printed); 978-3-030-85646-5(Online)

Minhaj, Uddin Monir and Yousuf, Abu and Azrina, Abd Aziz (2020) Syngas fermentation to bioethanol. In: Lignocellulosic Biomass to Liquid Biofuels. Elsevier, pp. 195-216. ISBN 978-0-12-815936-1

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Rosli, Abu Bakar (2021) Optimization of CNG Direct Injector Parameters using model-based calibration framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 (1). Springer, Singapore, pp. 917-929. ISBN 978-981-33-4596-6 (Print) 978-981-33-4597-3 (Online)

Mohamad Rizza, Othman and Anpalagam, Sivanesh Kumar and Nur Fitriyanni, Jafary (2023) Modeling and Analysis of Clinical & Municipal Waste Incineration Process using Aspen Plus. In: Computer Aided Chemical Engineering. Elsevier B.V., pp. 101-106. ISBN 978-0-443-23553-5

Mohammad Hafizi, Jamaluddin and R., Mamat and Amir, Aziz and M. M., Noor and Ahmad Tamimi, Ahmad Termizi (2017) Development of Strand Burner Test by Using Aluminized AP/HTPB. In: 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, pp. 99-104. ISBN 9783038357445

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Cionita, Tezara (2019) Mechanical properties of mengkuang leave fibre reinforced low density polyethylene composites. In: Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites: Development, Characterization and Applications. Woodhead Publishing Series, 6 (2018). Woodhead Publishing Series, Sawston‎, ‎Cambridge, pp. 181-196. (Unpublished)

Mohan, Varun Geetha and Ameedeen, Mohamed Ariff and Vijayan, Bincy Lathakumary and Al-Fahim, Mubarak-Ali (2022) A review on predictive models designed from artificial intelligence techniques in the wastewater treatment process. In: Trends, Paradigms, and Advances in Mechatronics Engineering. Premier Reference Source . IGI Global, Pennsylvania, United States, pp. 242-264. ISBN 9781668458877

Mohd Affandi, Mohd Ali and Jolius, Gimbun and Cheng, C. K. and R. M., Yunus (2015) Waste Cooking Oil Transesterification using Continuous Microwave Assisted Reactor (CMAR). In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 269-273. ISBN 978-967-0257-53-2

Mohd Amirul Hakim, Sidek and Rosli, Mohd Yunus and Muhammad Remanul, Islam and Firouzi, Amin (2022) Physical and Mechanical Properties of Waste Red-Gypsum Based Concrete Composites. In: Advanced Transdisciplinary Engineering and Technology. Advanced Structured Materials (STRUCTMAT), 174 . Springer, Champ, pp. 235-251. ISBN 978-3-031-01487 (Printed) 978-3-031-01488-8(Online)

Mohd Arif, Sulaiman and Syafiqah Ainda, Rozi and Khairunisa, Muthusamy and Rokiah, Othman and Alaa Omar, Tanash (2023) Effect of crushed clay brick as partial fine aggregate replacement on properties of concrete. In: Advanced Materials, Technologies and Technological Processes. Key Engineering Materials, 942 . Trans Tech Publications Ltd, Switzerland, pp. 117-122. ISBN 9783036412702

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Raja Mohd Taufika, Raja Ismail and Reza Ezuan, Samin (2015) Trajectory Control and Sway Suppression of a Rotary Crane System. In: Machine Vision and Mechatronics in Practice. Springer-Verlag, Berlin Heidelberg, pp. 165-175. ISBN 978-3-662-45513-5 (print); 978-3-662-45514-2 (online)

Mohd Ashraf, Ahmad and Nik Mohd Zaitul, Akmal Mustapha and Mohd Zaidi, Mohd Tumari and Mohd Helmi, Suid and Raja Mohd Taufika, Raja Ismail and Mohd Ashraf, Ahmad (2018) Data-driven PID tuning for liquid slosh-free motion using memory-based SPSA algorithm. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 197-210. ISBN 978-981-13-3708-6

Mohd Faizal, Md Jaafar and Hamidah, M. S. and Muhd Norhasri, M. S. and Noorli, I. and Mohamad Ezad Hafez, M. P. (2015) Chloride Permeability of Nanoclayed Ultra-High Performance Concrete. In: InCIEC 2014:Proceedings of the International Civil and Infrastructure Engineering Conference 2014. Springer, Singapore, pp. 612-623. ISBN 978-981-287-289-0 (print); 978-981-287-290-6 (online)

Mohd Faizal, Md Jaafar and Hamidah, M. S. and Muhd Nurhasri, M. S. and Noorli, I. (2016) Effect of Clay as a Nanomaterial on Corrosion Potential of Steel Reinforcement Embedded in Ultra-High Performance Concrete. In: InCIEC 2015: Proceedings of the International Civil and Infrastructure Engineering Conference. Springer, Singapore, pp. 679-687. ISBN 978-981-10-0154-3

Mohd Faizal, Md Jaafar and Norhaiza, Ghazali and Khairul Anuar, Shahid and Roziah, Zailan and Khairunisa, Muthusamy and Fadzil, Mat Yahaya (2023) Enhancement of autogenous healing on pre-cracked PFA concrete using response surface methodology (RSM). In: Functional Materials: Processing, Utilisation, Protection. Key Engineering Materials, 943 . Trans Tech Publications Ltd, Switzerland, pp. 213-223. ISBN 978-3-0364-1269-6

Mohd Falfazli, Mat Jusof and Ahmad Azwan, Abdul Razak and Shuhairie, Mohammad and Ahmad Nor Kasruddin, Nasir and Mohd Helmi, Suid and Mohd Ashraf, Ahmad and Zuwairie, Ibrahim (2018) Simulated kalman filter algorithm with improved accuracy. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 978-981-13-3708-6

Mohd Ghazali, Maarof and Gusman, Nawanir and Muhammad, Fakhrul The Concepts and Determinants of Manufacturing Flexibility. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 189-197. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Onlne)

Mohd Hafiz, Arzmi and Anwar P. P., Abdul Majeed and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Hong-Seng, Gan and Ismail, Mohd Khairuddin and Ahmad Fakhri, Ab. Nasir (2023) Epidemiology, Detection and Management of Cancer: An Overview. In: Deep Learning in Cancer Diagnostics. SpringerBriefs in Applied Sciences and Technology . Springer, pp. 1-7. ISBN 9789811989360

Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2017) Analytical modelling of protective headgear for soccer players. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 66-67. ISBN 9789670257884

Mohd Hazwan, Yusof and Amirul Nawaf, Esa and Muhammad Fadhli, Suhaimi (2023) Thermal Comfort Attainment by Personal Vortex Tube Cooling Device. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer Science and Business Media Deutschland GmbH, pp. 263-271. ISBN 978-981-19-6687-3

Mohd Herwan, Sulaiman and Zuriani, Mustaffa (2024) Optimal power flow with renewable power generations using hyper-heuristic technique. In: Handbook of Whale Optimization Algorithm: Variants, Hybrids, Improvements, and Applications. Academic Press, Cambridge, 253 -264. ISBN 978-0-323-95365-8

Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Mohd Mawardi, Saari and Hamdan, Daniyal and Mohd Razali, Daud and Saifudin, Razali and Amir Izzani, Mohamed (2018) Barnacles mating optimizer: a bio-inspired algorithm for solving optimization problems. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 211-2018. ISBN 978-981-13-3708-6

Mohd Hilmy Naim, Mohd Yakin and Nik Abdullah, Nik Mohamed and Mohd Ruzaimi, Mat Rejab (2022) Effect of particle discretization and horizon size on the displacement and damage plot using bond-based peridynamics. In: Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, 881 -897. ISBN 978-981-19-1456-0

Mohd Nizar, Muhd Razali and Nurul Hasya, .Md Kamil and Ainur Munira, Rosli and Amirul Hakim, Sufian and Yaw, Teo Chong (2024) Sustainable manufacturing practices in the sports industry: A review of biodegradable polymers for sports equipment. In: Intelligent Manufacturing and Mechatronics (iM3F 2023). Springer Proceedings in Materials, 40 . Springer Nature, Singapore, pp. 187-197. ISBN 2662-3161

Mohd Ridzuan, Nordin and Lee, Mei Ph'ng and Setyo Budi, Agus and Zulkapli, Buang and Norizan, Md Nor and Hassan Nazri, Khalid (2008) University-Community Engagement in Malaysia: Practices and Prospects. In: Enhancing the Quality of Higher Education Through Research: Shaping Future Policy. The Ministry of Higher Education, Malaysia, Kuala Lumpur, pp. 66-91. ISBN 978-983-3663-11-8

Mohd Ridzuan, Nordin and Yong, Liew Kong (2010) Synthesis of Alumina Nanofibers and Composites. In: Nanofibers. InTech, Rijeka, Croatia, pp. 405-418. ISBN 978-953-7619-86-2

Mohd Rozaimy, Ridzuan and Jamal Rizal, Razali and Noor Amira Syazwani, Abd Rahman (2023) It takes two to tango: Unlocking flood preparedness in Malaysia through social capital. In: Compilation of research papers on SSH (Social Sciences & Humanities). MNNF Publisher, Negeri Sembilan, Malaysia, pp. 9-17. ISBN 978-967-0052-07-6

Mohd Saiful, Asmal Rani and Ahmad Salihin, Samsudin and Mohd Nor Faiz, Norrrahim and N.M., Nurazzi and Muhammad Khalis, Abdul Karim and Mohd Hafiz, Mohd Zaid and Muhammad Kashfi, Shabdin and Mohd Mustafa, Awang Kechik and Khalina, Abdan (2024) Development and characterization of crab-based chitosan filler–reinforced polymer composites. In: Polymer Composites Derived from Animal Sources. Elsevier Ltd, United Kingdom, pp. 171-187. ISBN 978-0-443-22414-0

Mohd Suhardi, Mat Jusoh (2023) Pemakanan Halal dan Pembentukan Keperibadian Muslim. In: Halal Issues in Malaysia. Research book series, Vol. 1 . Penerbit UMP, Kuantan, Pahang, pp. 71-81. ISBN 978-967-2831-93-8

Mohd Zaidi, Mohd Tumari and M.A.M., Nasir and Muhammad Salihin, Saealal and A.W.A. , Aziz and Shahrizal, Saat and Mohd Helmi, Suid and Mohd Riduwan, Ghazali (2017) The control scheme of vehicle steer by wire system by using PD-PID controller. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 13-14. ISBN 9789670257884

Mokaizh, A. A. and Nour, A. H. and Alara, Oluwaseun Ruth and Abdulqawi, M. (2023) Study thermal resistance of γ-Al2O3 at various reaction temperatures via TGA analysis. In: Advanced Structural Materials. Materials Science Forum, 1081 . Trans Tech Publications Ltd, Switzerland, Switzerland, pp. 101-108.

Monir, Minhaj Uddin and Azrina, Abd Aziz and Ahmed, Mohammad Tofayal and Hasan, Md. Yeasir (2022) Chapter 11 - Hydrogen energy–Potential in developing countries. In: Renewable Energy and Sustainability Prospects in the Developing Economies. Elsevier, pp. 299-325. ISBN 9780323886680

Monir, Minhaj Uddin and Azrina, Abd Aziz and Ahmed, Mohammad Tofayal and Hasan, Md. Yeasir (2022) Hydrogen energy–Potential in developing countries. In: Renewable Energy and Sustainability: Prospects in Developing Economies. Elsevier, Netherlands, pp. 299-325. ISBN 978-0-323-88668-0

Monir, Minhaj Uddin and Azrina, Abd Aziz and Khatun, Fatema and N. Vo, Dai-Viet and Nadzirah, Mohd Mokhtar (2021) Lignocellulosic biomass conversion to syngas through Co gasification approach. In: Progressive Thermochemical Biorefining Technologies. CRC Press, Boca Raton, FL, pp. 125-142. ISBN 9781003098591

Monir, Minhaj Uddin and Azrina, Abd Aziz and Khatun, Fatema and Vo, Dai-Viet N. and Nadzirah, Mohd Mokhtar (2021) Lignocellulosic Biomass Conversion to Syngas through Co-Gasification Approach. In: Progressive Thermochemical Biorefining Technologies. CRC Press, Boca Raton, FL, pp. 125-142. ISBN 978-1-003-09859-1 (ebook)

Moorthy, Kohbalan and Jaber, Aws Naser and Mohd Arfian, Ismail and Ernawan, Ferda and Mohd Saberi, Mohamad and Safaai, Deris (2019) Missing-values imputation algorithms for microarray gene expression data. In: Microarray Bioinformatics. Methods in Molecular Biology, 1986 . Humana Press, New York, United States, pp. 255-266. ISBN 978-1-4939-9441-0

Mostafa, Saifuldun and Saad, Hayder and Mustafa, Musa Jaber and Ali, Mohammed Hasan and Dhafer, Karam (2016) The Design Trends of Keystream Generator for Stream Cipher for High Immunity Attacks. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 (1). Springer International Publishing, Switzerland , pp. 877-889. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

Muazzin, Mupit and Islam, Muhammad Remanul and Mohd Asyadi, Azam and Smdani, Md Gulam and R. M., Yunus and Firouzi, Amin and Siew Kooi, Ong (2022) Performance of Graphene Oxide Doped Polyaniline Composite Electrodes for Energy Storage: Effects of In-Situ Synthesis. In: Advanced Transdisciplinary Engineering and Technology. Advanced Structured Materials (STRUCTMAT), 174 . Springer Link, Cham, NY, pp. 253-269. ISBN 978-3-031-01487-1(Printed) 978-3-031-01488-8(Online)

Muddasser, Inayat and Shaharin, A. Sulaiman and Aini, Abd Jamil and Fiseha, M. Guangul and Atnaw, Samson M. (2015) The Study of Temperature Profile and Syngas Flare in Co-gasification of Biomass Feedstock in Throated Downdraft Gasifier. In: ICGSCE 2014 : Proceedings of the International Conference on Global Sustainability and Chemical Engineering. Springer, Singapore, pp. 203-210. ISBN 978-981-287-505-1 (online)

Muhamad Fairuz, Ahmad Jasmi and Fernando, Yudi and Rusdi, Omar and Muhammad Shabir, Shaharudin (2022) Reflections and Future Directions for the Green Maritime Supply Chain in Malaysia. In: Multidisciplinary Perspectives on Cross-Border Trade and Business. Multidisciplinary Perspectives on Cross-Border Trade and Business, 1 (17). IGI Publisher, USA, pp. 270-289. ISBN 9781799890713

Muhamad Idaham, Umar Ong and Mohamed Ariff, Ameedeen and Imran Edzereiq, Kamarudin (2018) Meta-requirement method towards analyzing completeness of requirements specification. In: Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing book series (AISC), 881 . Springer Nature, Switzerland, pp. 444-454. ISBN 978-3-030-02683-7

Muhamad Miziazam, Yahya and Mohd Daud, Awang and Mansor, Sulaiman (2018) The role of National Fatwa Committee in handling consumerism issues in Malaysia. In: Halal Industry. Halal Products Research Institute, UPM, Serdang, Selangor, pp. 55-69. ISBN 978-967-12398-4-1

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) A review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure : Materials and Applications. Springer Nature, pp. 43-58. ISBN 978-981166383-3, 978-981166382-6

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Siti Safarah, Amirnuddin (2023) Finite Element Modeling of Tin Slag Polymer Concrete Column with FRP Material Confinement under Compression. In: Reinforced and Porous Materials for Structural Applications. Penerbit UTM, Universiti Teknologi Malaysia, pp. 127-152. ISBN 978-983-52-1933-7

Muhammad, Muttaqin and Nor Shazwanie and Najwa Raihana and Rohana, Abdul Karim (2018) Modelling automatic IoT home light system (SmartLi) by NODEMCU ESP8266. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 447-457. ISBN 978-981-13-3708-6

Muhammad Aizzat, Zakaria and Anwar, P. P. A. Majeed and Ismail, Mohd Khairuddin and Zahari, Taha (2017) Kinematics Analysis of a 3DoF Lower Limb Exoskeleton for Gait Rehabilitation: A Preliminary Investigation. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 168-172. ISBN 978-981-10-3736-8

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Anwar P. P, Abdul Majeed and Mohd Azraai, Mohd Razman, and Rabiu Muazu, Musa and Muhammad Aizzat, Zakaria (2020) The classification of skateboarding tricks by means of support vector machine: An evaluation of significant time-domain features. In: Embracing Industry 4.0. Lecture Notes in Electrical Engineering, 678 (11). Springer, Malaysia, pp. 125-132. ISBN 978-981-15-6025-5

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Muhammad Aizzat, Zakaria (2020) The classification of skateboarding trick manoeuvres through the integration of IMU and machine learning. In: Embracing Industry 4.0. Lecture Notes in Electrical Engineering, 678 . Springer Singapore, Singapore, pp. 125-132. ISBN 978-981-15-6024-8 (Printed) 978-981-15-6025-5(Online)

Muhammad Amzar Syazani, Mohd Azli and Mahfuzah, Mustafa and Rafiuddin, Abdubrani and Amran, Abdul Hadi and S. N., Aqida and Zarith Liyana, Zahari (2018) Electromyograph (EMG) signal analysis to predict muscle fatigue during driving. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 405-420. ISBN 978-981-13-3708-6

Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Anwar P. P., Abdul Majeed (2021) The classification of skateboarding tricks: A support vector machine hyperparameter evaluation optimisation. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Singapore, Singapore, pp. 1013-1022. ISBN 978-981-33-4596-6 (Printed) 978-981-33-4597-3 (Online)

Muhammad Arifuddin, Fitriady and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Urban Heat Island Phenomenon in Tropical Countries: Analysis of the Wake Flow Behind Slender High-Rise Building. In: Lecture Notes in Energy. Lecture Notes in Energy, 92 . Springer Link, Springer Nature Singapore, pp. 522-538. ISBN 2195-1284 (Printed); 2195-1292 (Online)

Muhammad Fadhlan, Afif Bin Nazri and Muhammad Ikram, Mohd Rashid and Mohd Rashid (2018) Simultaneous perturbation stochastic approximation optimization for energy management strategy of HEV. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 361-368. ISBN 978-981-13-3708-6

Muhammad Farhan, Zolkepli and Mohd Fakhrurrazi, Ishak and Mohd Sharulnizam, Wahap (2022) The Application of Unmanned Aerial Vehicles (UAV) for Slope Mapping with the Determination of Potential Slope Hazards. In: Design in Maritime Engineering. Sspringer, Switzerland AG, pp. 45-65. ISBN 978-3-030-89988-2

Muhammad Nor Arifin, Yaakob and Rasidi, Roslan and Mohd Hasbi, Ab Rahim (2024) Rheologic and shape memory properties of natural biopolymers. In: Handbook Natural Polymers. Functionalization, Surface Modification, and Properties, 2 . Elsevier, Amsterdam, Netherlands, pp. 501-522. ISBN 978-0-323-99856-7

Muhammad Nur Farhan, Saniman and Nadzir Akif, Dzulkifli and Khairul Anuar, Abd Wahid and Wan Mansor, Wan Muhamad and Khairul Azhar, Mohamad and Erny Afiza, Alias and Jamilah, Mohd Shariff (2022) Water retention properties of a fused deposition modeling based 3D printed polylactic acid vessel. In: Advanced Maritime Technologies and Applications Papers from the ICMAT 2021. Advanced Structured Materials book series, 166 . Sprinter. Champ, pp. 311-323. ISBN 978-3-030-89991-2(Printed); 978-3-030-89992-9 (Online)

Muhammad Salihin, Saealal and A.T., Ramachandran and M. F., Abas and N., Md.Saad (2017) Synchronize Speed Control for Multiple DC Motors Using Linear Quadratic Regulator. In: Proceedings of the International Conference on Computing, Mathematics and Statistics (iCMS 2015): Bridging Research Endeavors. Springer, pp. 85-92. ISBN 978-981-10-2772-7

Muhammad Shabir, Shaharudin and Fernando, Yudi (2021) Environmental Friendliness in Low Carbon Supply Chain and Operations. In: Encyclopedia of Organizational Knowledge, Administration, and Technology. IGI Global, pp. 2421-2430. ISBN 9781799834748

Muhammad Shabir, Shaharudin and Fernando, Yudi (2018) Measuring Low Carbon Supply Chain. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5446-5455. ISBN 9781522522553

Muhammad Syahmi, Ghazali and Muhammad Ikram, Mohd Rashid (2018) Random search in energy management strategy (EMS) for hybrid electric vehicles. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 219-227. ISBN 978-981-13-3708-6

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan (2024) Application of electrical resistivity tomography in landfill leachate detection assessment. In: A Review of Landfill Leachate: Characterization Leachate Environment Impacts and Sustainable Treatment Methods. Springer Water . Springer Nature, Switzerland, pp. 1-22. ISBN 978-3-031-55513-8

Munira, Halili and Latifah Naina, Mohamed and Fernando, Yudi (2018) Reflections of the 1Malaysia Supply Chain (1MSC). In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5527-5537. ISBN 9781522522553

Murni Fatehah, Alias and Mezhuyev, Vitaliy and Al-Emran, Mostafa (2020) A Systematic Review of Metamodelling in Software Engineering. In: Recent Advances in Intelligent Systems and Smart Applications. Studies in Systems, Decision and Control, 295 . Springer, Cham, pp. 3-27. ISBN 978-3-030-47413-3

Muthusamy, Khairunisa and Hassan, Mohammad Ikhwan and Rokiah, Othman and Sulaiman, Mohd Arif and Hanis Nadiah, Ruslan (2023) Compressive Strength of Concrete Containing Roof Tile Waste as Partial Fine Aggregate Replacement. In: Advanced Materials, Technologies and Technological Processes. Key Engineering Materials, 942 . Trans Tech Publications, Switzerland, pp. 95-101. ISBN 1662-9795

N., Mohd Jamil (2015) Mathematical Analysis of a Kinetic Model for Enzymatic Cellulose Hydrolysis. In: Energy and Sustainability V. WIT Press, pp. 499-510. ISBN 978-1-78466-095-6

N., Sazali and W. N. W., Salleh and A. F., Ismail (2021) Polymeric Membrane for CO2/CH4 Separation. In: Polymeric Membranes for Water Purification and Gas Separation. Materials Research Foundations, Millersville, PA, vol. 113, Chapter 2, pp. 203-242. ISBN 978-1-64490-163-2

N., Zainol and Abdul Sahli, Fakharudin and Nor Ilyya Syahira, Zulaidi (2020) Model optimization using artificial intelligence algorithms for biological food waste degradation. In: Advances in Waste Processing Technology. Springer, Singapore, pp. 173-181. ISBN 9789811548208

N. A. M., Khairussaleh and Parke, G. A. R. and Imam, M. (2015) Fatigue Analysis of Cable Anchorages on Cable-Stayed Bridges. In: Multi-span Large Bridges: Proceeedings of the International Conference on Multi-span Large Bridges. CRC Press, Leiden, The Netherlands, pp. 937-946. ISBN 9781138027572

N. F., Adnan and M. F., Ghazali (2015) Detecting Leak in Gas Pipeline using Continuous Wavelet Transform and Kurtosis. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 347-351. ISBN 978-967-0257-53-2

N. F., Mazuki and Saadiah, Mohd Ali and A. F., Fuzlin and N. M., Khan and Ahmad Salihin, Samsudin (2022) Basic aspects and properties of biopolymers. In: Biopolymers in Nutraceuticals and Functional Foods. Polymer Chemistry Series (36). Royal Society of Chemistry, London, UK, pp. 1-35. ISBN 978-1-83916-781-2

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and Ummu Kulthum, Jamaludin (2016) Trial Protocol Analysis of Nursing Workload Intensity within ICU. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 294-297. ISBN 978-981-10-0265-6 (Print); 978-981-10-0266-3 (Online)

N. S., Arifin and S. M., Zokri and L. A., Aziz and Abdul Rahman, Mohd Kasim and Mohd Zuki, Salleh and N. F., Mohammad (2017) Mathematical Modeling on Aligned Magnetic Field of Two-Phase Dusty Casson Fluid. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 442-444. ISBN 9789670257884

Nabi, F. G. and Sundaraj, K. and Kiang, L. C. and Palaniappan, R. and Sundaraj, S. and Ahamed, Nizam Uddin (2017) Artificial Intelligence Techniques Used for Wheeze Sounds Analysis: Review. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 37-40. ISBN 978-981-10-3736-8

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris and M., Ishak (2018) A review on mechanical properties of SnAgCu/Cu joint using laser soldering. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 97-107. ISBN 9978-981-10-9040-0

Nadiatul Adilah, Ahmad Abdul Ghani and Nur Insyirah Izzati, Omar (2018) Bed Load and River Bed Pattern at Lebir River After Extreme Flood Event in 2014. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer, Singapore, pp. 299-308. ISBN 978-981-13-0073-8

Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2018) Optimization of multi-holes drilling path using particle swarm optimization. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 101-107. ISBN 9789811087875

Natanamurugaraj, Govindan and Maniam, Gaanty Pragas and Mohd Hasbi, Ab. Rahim and Ahmad Ziad, Sulaiman and Azilah, Ajit (2021) Biological macromolecules from algae and their antimicrobial applications. In: Biological Macromolecules. Bioactivity and Biomedical Applications . Science Direct, pp. 203-217.

Nayak, S. K. and Mishra, P. C. and Nanda, Sonil and Nayak, Biswajeet and M. M., Noor (2020) Opportunities for Biodiesel Compatibility as a Modern Combustion Engine Fuel. In: Biorefinery of Alternative Resources: Targeting Green Fuels and Platform Chemicals. Springer, Singapore, pp. 457-476. ISBN 978-981-15-1804-1

Nayeem, Abdullah and Jun Haslinda, Shariffuddin and Abu, Yousuf (2024) Absorption technology for upgrading biogas to biomethane. In: Biogas to Biomethane Engineering, Production, Sustainability. Applied Biotechnology Reviews Series . Elsevier Ltd, United States, pp. 69-84. ISBN 978-0-443-18479-6

Nazatul Sharreena, Suhaimi and Mohd Mawardi, Saari and Hamzah, Ahmad and Mohd Rusllim, Mohamed and Nurul Akmal, Che Lah (2018) A resonant type AC magnetometer for evaluation of magnetic nanoparticles. In: Intelligent Manufacturing & Mechatronics. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 93-99. ISBN 9789811087875

Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamed and M. F. F., Ab. Rashid (2021) Ergonomics study in Quick Response Manufacturing (QRM) automotive workstation environment to overcome employee complaints. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 681-693. ISBN 978-981-16-4115-2

Ng, Weng Seng and Ahmad Shahrizan, Abdul Ghani (2018) Vision based smart sorting machine. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 13-25. ISBN 978-981-13-8323-6

Ngien, S. K. and Gisen, J. I. A. (2018) Marine Oil Spillage in Malaysian Waters. In: Disasters in Malaysia: Tomorrow is a Mystery. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 81-99. ISBN 978-967-2054-94-8

Nik Aloesnita, Nik Mohd Alwi (2015) Language Learning Performance using Engineering-Based Tasks via Text Chat. In: Contemporary Task-Based Language Teaching in Asia. Contemporary Studies in Linguistics . Bloomsbury Publishing Plc, London, pp. 193-210. ISBN 9781472572219

Nik Aloesnita, Nik Mohd Alwi and Noor Raha, Mohd Radzuan and Noor Azlinda, Zainal Abidin and Nor Suhardiliana, Sahar and Hafizoah, Kassim and Fatimah, Ali and Norrihan, Sulan and Suriya Kumar, Sinnadurai and Zailin Shah, Yusoff (2018) Preparatory Intensive English: Preparing International Students for Academic Study in Higher Education. In: Teaching And Learning English In Malaysian Higher Education: Sharing Experience To Improve Practice. UM Press, Kuala Lumpur, pp. 43-60. ISBN 978-967-488-028-6

Noor Aisyah, Ab Rahman and Mahfuzah, Mustafa and Rosdiyana, Samad and Nor Rul Hasma, Abdullah and Norizam, Sulaiman (2018) Energy spectral density analysis of muscle fatigue. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 437-446. ISBN 978-981-13-3708-6

Noor Raha, Mohd Radzuan (2022) Antologi Puisi Keistimewaan dan Keindahan Setempat: Pulau Pinang (Kilau Aurora Pulau Mutiara). In: UNSPECIFIED Komuniti Menulis Malaysia (KISMy).

Noor Raha, Mohd Radzuan (2023) Biasiswa Ciput. In: Anekdot Duit Poket. Syahida Hassan Enterprise, pp. 88-92. ISBN 9789672378907

Noor Raha, Mohd Radzuan and Sarjit, Kaur (2016) Engineering Students' Communication Apprehension and Competence in Technical Oral Presentations. In: Handbook of Research on Effective Communication, Leadership, and Conflict Resolution. IGI Global, USA, pp. 371-383. ISBN 9781466699700 (Print); 9781466699717 (Online)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Discretization: Equal Frequency Binning, Entropy/MDL and Semi Naives Algorithms of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 77-87. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

Noor Suhana, Sulaiman and Rohani, Abu Bakar (2016) Rough Set Significant Reduction and Rules of Intrusion Detection System. In: Advances in Digital Technologies: Proceedings of the 7th International Conference on Applications of Digital Information and Web Technologies 2016. Frontiers in Artificial Intelligence and Applications, 282 . IOS Press, Amsterdam, pp. 65-76. ISBN 978-1-61499-636-1 (print); 978-1-61499-637-8 (online)

Noor Suraya, Romali and Muhammad @ S. A., Kushren Sulaiman and Zulkifli, Yusop and Zulhilmi, Ismail (2015) Flood Damage Assessment: A Review of Flood Stage-Damage Function Curve. In: ISFRAM 2014: Proceedings of the International Symposium on Flood Research and Management. Springer, Singapore, pp. 147-159. ISBN 978-981-287-364-4 (print); 978-981-287-365-1 (online)

Noor Zirwatul Ainee, Naharuddin and Nurul Hazlina, Noordin (2015) Parametric Analysis of a Low Profile UWB Trapezoidal Antenna for Ultra Wireless Communication System. In: Theory and Applications of Applied Electromagnetics. Springer International Publishing, Switzerland, pp. 295-304. ISBN 978-3-319-17268-2 (print), 978-3-319-17269-9 (online)

Noorli, Ismail and Hanita, Yusof and Mohd Faizal, Md Jaafar (2016) The Influenced of Localized Corrosion on the Natural Frequency in the Reinforced Concrete Beam. In: InCIEC 2015: Proceedings of the International Civil and Infrastructure Engineering Conference. Springer, Singapore, pp. 117-124. ISBN 978-981-10-0154-3

Nor Azlina, Alias and Lariyah, Mohd Sidek (2016) Application of 1D Shallow Flow Model for Simulation of Pollution Fate and Streamflow. In: ISFRAM 2015. Springer, Singapore, pp. 251-263. ISBN 978-981-10-0499-5 (Print); 978-981-10-0500-8 (Online)

Nor Azuana, Ramli and Mel Keytingan, M. Shapi (2022) Building energy management. In: Control of Smart Buildings: An Integration to Grid and Local Energy Communities. Studies in Infrastructure and Control (1). Springer, Springer Singapore, pp. 37-73. ISBN 978-981-19-0374-8

Nor Azuana, Ramli and Pratondo, Agus and Sahimel Azwal, Sulaiman and Wan Nur Syahidah, Wan Yusoff and Noratikah, Abu (2024) Detection of paddy plant diseases using google teachable machine. In: Recent Advances on Soft Computing and Data Mining: Proceedings of the Sixth International Conference on Soft Computing and Data Mining (SCDM 2024), August 21-22, 2024. Lecture Notes in Networks and Systems, 1078 . Springer, Berlin, Germany, 360 -369. ISBN 978-303166964-4

Nor Haniza, Sarmin and Muhammad Azrin, Ahmad and Yuhani, Yusof (2014) Second Order Limit Language: An Introduction. In: Recent Advances In DNA Splicing Systems. Penerbit Universiti Teknologi Malaysia, Johor, Malaysia, pp. 43-57. ISBN 978-983-52-1000-6

Nor Hasmaliana, Abdul Manas and Dayang Norulfairuz, Abang Zaidel and Nur Izyan, Wan Azelee and Siti Fatimah Zaharah, Mohd Fuzi and Aizi Nor Mazila, Ramli and Shalyda, Md Shaarani and Rosli, Md. Illias and Norsuhada, Abdul Karim (2023) Delivery of bioencapsulated proteins. In: Smart Nanomaterials for Bioencapsulation. Elsevier, pp. 63-75. ISBN 9780323912297 (Unpublished)

Nor Hidayati, Abdul Aziz and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Zulkifli, Md. Yusof and Mohd Saberi, Mohamad (2018) Single-solution simulated Kalman Filter algorithm for routing in printed circuit board drilling process. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 649-655. ISBN 9789811087875

Nor Sakinah, Abdul Shukor and Mohd Ashraf, Ahmad (2018) Data-driven PID tuning based on safe experimentation dynamics for control of double-pendulum-type overhead crane. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 295-303. ISBN 9789811087875

Nor Syahirah, Abdul Wahid and Mohd Saberi, Mohamad and Abdul Hakim, Mohamed Salleh and Safaai, Deris and Chan, Weng Howe and Omatu, Sigeru and Corchado, Juan Manuel and Muhammad Farhan, Sjaugi and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) A Hybrid of Harmony Search and Minimization of Metabolic Adjustment for Optimization of Succinic Acid Production. In: 10th International Conference on Practical Applications of Computational Biology & Bioinformatics. Advances in Intelligent Systems and Computing, 477 (Pt. IV). Springer, Switzerland, pp. 183-191. ISBN 978-3-319-40125-6 (print); 978-3-319-40126-3 (online)

Norasman, Othman and Ahmad Khairi, Abd Wahab and Mohamad Hidayat, Jamal (2014) Effects of Seasonal Variations on Sandy Beach Groundwater Table and Swash Zone Sediment Transport. In: Proceedings of 34th Conference on Coastal Engineering. Coastal Engineering Research, California, pp. 1-12. ISBN 978-0-9896611-2-6

Norfatihah, Mazuki and Mohd Saiful Asmal, Rani and Nuraziliana, Muhd Ghazali and Nurhasniza, Mamajan Khan and Muhammad Nor Arifin, Yaakob and Ahmad Salihin, Samsudin (2024) Structural and performance of chitosan-based polymer composites for electrical applications. In: Polymer Composites Derived from Animal Sources. Woodhead Publishing, Sawston, UK, 321 -351. ISBN 978-0-443-22414-0

Norfazillah, Talib and Ainaa Mardhiah, Sabri and Nor Athira, Jamaluddin and Mohamad Hafiz Akmal, Suhimi and Amiril Sahab, Abdul Sani (2022) Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore, pp. 90-93. ISBN 978-981-16-9949-8 (Printed); 978-981-16-9949-8(Online)

Norhaiza, Ghazali and Khairunisa, Muthusamy and Noorul Athirah, Abdullah and Muhamad Irfan, Muhamad Asri and Nur Farah Aziera, Jamaludin (2022) Effect of coal bottom ash as partial sand replacement for lightweight aggregate concrete. In: Materials for Sustainable Construction Engineering. Key Engineering Materials, 912 . Trans Tech Publications, Switzerland, Switzerland, pp. 119-125. ISBN 978-303571792-1

Norhayati, Kasim Sulamat and Lee, Khai Loon (2022) Improving customer satisfaction through supply chain management best practices in fast food restaurant. In: In Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit UMP, Kuantan, Pahang, pp. 39-46. ISBN 978-967-2831-28-0

Norhayati, Rosli and Noryanti, Muhammad and Muhammad Fahmi, Ahmad Zuber (2023) Predictive Analytics of the Covid-19 Outbreak Under Uncertainty of the Disease Spreading. In: Emerging Technologies During the Era of Pandemic COVID-19. Penerbit UMP, UMP, pp. 43-56. ISBN 978-967-2831-77-8

Norhidayah, Muhammad and Jasni, Mohamad Zain and Md Yazid, Mohd Saman and Mohd Fadhil, Ramle (2015) Enhancement of RSA Key Generation Using Identity. In: Advanced Computer and Communication Engineering Technology : Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, 315 . Springer International Publishing, Switzerland, pp. 683-692. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (e-book)

Norizam, Sulaiman and M. S., Jadin and Amran, Abdul Hadi and M. S., Najib and Mohd Ashraf, Ahmad and Nurul Shazrien Amysha, Yusuf (2017) Evaluation of Mobile Phone Wireless Charging System Using Solar and Inductive Coupling. In: Advances in Information and Communication Technology. Advances in Intelligent Systems and Computing, 538 (2). Springer International Publishing AG , Vietnam, pp. 238-247. ISBN  9783319490724

Norizan, Yusof and Abdul Rashid, Abdul Aziz and Sawai, Rezki Perdani (2021) The effect of progressive muscle relaxation using biofeedback therapy on engineering and technical students. In: Social science and technology toward performance improvement: Research concept, effect and agenda. Kaizentrenovation Sdn Bhd, Tanjung Malim, pp. 224-232. ISBN 9789671854693

Norkhairani, Abdul Rawi and Abd. Rasid, Mamat and Maizan, Mat Amin and Muhamad, Mat Noor (2023) Aplikasi perbincangan maya sebagai alat kelangsungan pekerjaan semasa PKP. In: Pandemik Covid-19 dan perubahan landskap kehidupan masyarakat. Penerbit UMP, pp. 13-27. ISBN 978-967-2831-80-8

Norlirabiatuladawiyah, Che Ani and Saidatul Shima, Jamari and W. S. N., Wan Yaacob (2017) Effect of Cross-Linker Concentration on the Synthesis and Swelling Behaviour of Superabsorbent Polymers (SAP) Using Graft Polymerization Techniques. In: Advanced Materials Research and Technologies. Trans Tech Publications, Switzerland, pp. 62-68. ISBN 9783035710052

Noryanti, Muhammad and Coolen, Frank and Maturi, Tahani-Coolen and Norazlina, Ismail (2023) Nonparametric predictive inference with copulas for bivariate data. In: Copula modelling and its application. UTM Press, Johor, Malaysia, pp. 1-18. ISBN 978-983-52-1962-7

Nour, A. H. and Azhari, H. Nour (2017) Production of Biogas and Performance Evaluation of Ultrasonic Membrane Anaerobic System (UMAS) for Palm Oil Mill Effluent Treatment (POME). In: Biological Wastewater Treatment and Resource Recovery. INTECH, pp. 229-243. ISBN 9789535130451 (print); 9789535130468 (online)

Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Natasha, Mohd Sukri and Nur Hazreen, Mohd Hasni (2021) Comparative study between TPU flexible and soft epoxy resin materials on development of heart model for CardioVASS device. In: Intelligent Manufacturing and Mechatronics Proceedings of SympoSIMM 2020. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 913-931. ISBN 978-981-16-0865-0 (Print); 978-981-16-0866-7 (Online)

Nur Farha, Shaafi and Saifful Kamaluddin, Muzakir (2022) Industrial applications of quantum dots. In: Graphene, Nanotubes and Quantum Dots-Based Nanotechnology: Fundamentals and Application. Woodhead Publishing Series in Electronic and Optical Materials . Elsevier, New Delhi, India, pp. 771-803. ISBN 978-0-323-85457-3

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan (2021) Industrial Sustainability Policy and Standards-Related on Management Discipline of SMEs Industry in Malaysia: A Conceptual Framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 25-32. ISBN 978-981-15-9505-9

Nur Sukinah, Aziz and Adzhar, Kamaludin (2015) Validation of Questionaire for Website Usability (QWU) Instrument Based on Experts Review. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 362 . Springer International Publishing, Switzerland, pp. 891-902. ISBN 978-3-319-24582-9 (Print); 978-3-319-24584-3 (Online)

Nur Syahirah, Mohd Sabli and Mohd Faizal, Jamlos and Fatimah, Dzaharudin (2021) Sustainability of fertigation in agricultural crop production by IoT system: A review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 87-96. ISBN 978-981-33-4597-3

Nur Syazwani, Ahmad (2017) Case on Importance of Strategic Location. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 32-37. ISBN 978-967-2054-50-4

Nurainaa, Elias and Nafrizuan, Mat Yahya and Sing, Er Hong (2018) Numerical analysis of fuzzy logic temperature and humidity control system in pharmaceutical warehouse using MATLAB fuzzy toolbox. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 623-629. ISBN 9789811087875

Nuraini, Mohd Yusoff and Jolius, Gimbun and M. M., Yusoff (2013) Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, US, pp. 151-157. ISBN 978-1-4614-6207-1, 978-1-4614-6208-8 (online)

Nurazima, Ismail and Mohd Hafizi, Zohari and Lim, Kok-Sing and Harith, Ahmad (2022) Lamb Wave Actuation Techniques for SHM System- A review. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering, 882 . Springer, Singapore, pp. 677-685. ISBN 978-981-19-1576-5 (Printed); 978-981-19-1577-2 (Online)

Nurbaiti, Wahid and Hairi, Zamzuri and Noor Hafizah, Amer and Dwijotomo, Abdurahman and Sarah ‘Atifah, Saruchi (2024) Motion planning and control for autonomous vehicle collision avoidance systems using potential field-based parameter scheduling. In: Machine Intelligence in Mechanical Engineering. Elsevier Inc., pp. 149-177. ISBN 9780443186448

Nurfarhana, Mustafa and Nur Hazimah Syazana, Abdul Razak and Nurhafizah, Abu Talip Yusof and Mohamad Shaiful, Abdul Karim (2021) Development of microwave antenna for cancer treatment. In: Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Switzerland, pp. 127-136. ISBN 978-3-030-70917-4

Nurhaffizah, Hassan and Mohd Hatta, Mohammad Ariff and Hairi, Zamzuri and Sarah ‘Atifah, Saruchi and Nurbaiti, Wahid (2024) Human-like driver model for emergency collision avoidance using neural network autoregressive with exogenous inputs. In: Machine Intelligence in Mechanical Engineering. Woodhead Publishing Reviews: Mechanical Engineering Series . Woodhead Publishing, Sawston, United Kingdom, 359 -377. ISBN 978-0-443-18644-8

Nurhaizan, Mohd Zainudin and Ahmad Amir, Hafiz Ahmad and Rahimi, A. Rahman and Fadzida, Ismail (2023) Construction and demolition waste recycling and reuse clause in standard form contracts: impact on project performance. In: Research Handbook on Project Performance. Business 2023 (1). Edward Elgar Publishing, 9781802207613 (Online);, pp. 55-66. ISBN 9781802207606(Printed) ; 9781802207613 (Online)

Nurhidayah, Azmy (2019) Bringing Industry Into The Classroom: Teaching and Learning in Engineering Technology. In: CAIC Series: Teaching and Learning Series 2. Penerbit UMP, Kuantan, Pahang, pp. 1-19. ISBN 978-967-2226-15-4

Nurhidayah, Azmy and Lum, Wai Wei (2021) Quality and Quality Standards In Construction: A Systematic Review. In: UMP Research Series: Construction Engineering and Management (Vol.1). Penerbit UMP, Kuantan, Pahang, pp. 29-39. ISBN 978-967-2054-75-7

Nurizzatul Atikha, Rahmat and Kamil Khalili, Haji Abdullah and Khairun Adhani, Khairunizam (2023) Natural Ventilation in Traditional Malay House A Study of Flow Pattern by an Enhanced Smoke Wire Technique. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer, pp. 289-303. ISBN 978-981-19-6687-3

Nurmadiha, Osman and Mohd Faizal, Jamlos and Fatimah, Dzaharudin and Aidil Redza, Khan and You, Kok Yeow and Khairil Anuar, Khairi (2020) Real-time and predictive analytics of air quality with IoT system: A review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 107-116. ISBN 978-981-33-4597-3

Nurnajmin Qasrina, Ann and Pebrianti, Dwi and Bayuaji, Luhur and Mohd Razali, Daud and Rosdiyana, Samad and Zuwairie, Ibrahim and Rosyati, Hamid and Mohammad, Syafrullah (2018) SKF-based image template matching for distance measurement by using stereo vision. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 439-447. ISBN 9789811087875

Nurul Afiqah, Zainal and Kamil Zakwan, Mohd Azmi and Muhammad Aizzat, Zakaria and Abdul Majeed, Anwar P. P. (2021) Minimizing normal vehicle forces effect during cornering of a two in-wheel vehicle through the identification of optimum speed via particle swarm optimization. In: Advances in Robotics, Automation and Data Analytics. Advances in Intelligent Systems and Computing, 1350 (https://doi.org/10.1007/978-3-030-70917-4). Springer, Berlin, Germany, pp. 407-412. ISBN 978-303070916-7

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath (2018) A study on the exposure of vertical vibration towards the brain on seated human driver model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 601-609. ISBN 9789811087875

Nurul Ain, Abdul Shukor and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Ergonomic study on wrist rehabilitation therapy (WRist-T) device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering, 55 . Springer Singapore, Singapore, pp. 557-563. ISBN 9789811087875

Nurul Aini, Mohd Azman (2022) Active biocomposite packaging films: Compatibility of carrageenan with cellulose nanofiber from empty fruit bunches. In: Industrial Applications of Nanocellulose and Its Nanocomposites. Woodhead Publishing Series in Composites Science and Engineering . Elsevier, Cambridge, UK, pp. 311-326. ISBN 978-0-323-89909-3

Nurul Akmal, Che Lah and Mohd N. M., Zubir and Mahendran, Samykano (2018) Engineered nanomaterial in electronics and electrical industries. In: Handbook of Nanomaterials for Industrial Applications. Micro and Nano Technologies, 1 (1). Elsevier, pp. 324-364. ISBN 9780128133514

Nurul A’in, Nadzri and Chai, Kar Hoe and Mohd Mawardi, Saari and Saifuddin, Razali and Mohd Razali, Daud and Hamzah, Ahmad (2018) Vehicle detection system using tunnel magnetoresistance sensor. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 547-555. ISBN 9789811087875

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Saifuddin, Razali and Mohd Rusllim, Mohamed and Hamzah, Ahmad (2018) Detection of metallic contaminant in aluminium soda can using TMR sensor. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 527-535. ISBN 9789811087875

Nurul Fatihah, Mohamad Roli and Wan Mohd Hafizuddin, Wan Yussof and Syed Mohd Saufi, Tuan Chik and Mazrul Nizam, Abu Seman (2023) Recovery of xylose from oil palm frond (OPF) bagasse hydrolysate using commercial spiral-wound nanofiltration membrane. In: Nanofiltration for Sustainability. CRC Press, Taylor and Francis Group, Boca Raton, FL, pp. 235-246. ISBN 9781003261827

Omer, Adam and Zailani, Abdullah and Amir, Ngah and Kasypi, Mokhtar and Wan Muhamad Amir, Wan Ahmad and Herawan, Tutut and Noraziah, Ahmad and Mustafa, Mat Deris and Abdul Razak, Hamdan (2016) IncSPADE: An Incremental Sequential Pattern Mining Algorithm Based on SPADE Property. In: Advances in Machine Learning and Signal Processing. Lecture Notes in Electrical Engineering, 387 . Springer International Publishing, Switzerland, pp. 81-92. ISBN 978-3-319-32212-4 (Print); 978-3-319-32213-1 (online)

Osarieme, Uyi Osazuwa and Sumaiya, Zainal Abidin (2022) Catalysis for CO2 conversion; perovskite based catalysts. In: Carbon Dioxide Utilization to Sustainable Energy and Fuels. Advances in Science, Technology & Innovation . Springer, Cham, Switzerland AG, pp. 297-310. ISBN 978-3-030-72877-9

Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin (2021) Catalysts for Carbon dioxide utilization to sustainable energy and fuels. In: Catalysis for CO2 Conversion; Perovskite Based. Advances in Science, Technology & Innovation book series (ASTI) (1). Springer Cham, pp. 297-310. ISBN 978-3-030-72876-2 (Printed); 978-3-030-72877-9 (Online)

Osman, Azim Azuan and Ahmad Nazif, Noor Kamar and Rahamaddulla, Syed Radzi (2023) Towards Achieving a Sustainable Lean Transformation: Measuring Tangible and Intangible Gains. In: Innovation, Strategy, and Transformation Frameworks for the Modern Enterprise. IGI Global, Hershey, Pennsylvania, pp. 60-87. ISBN 9798369304587, EISBN: 9798369304594

Pebrianti, Dwi and Hao, Yong Hooi and Nur Aisyah Syafinaz, Suarin and Bayuaji, Luhur and Zulkifli, Musa and Mohammad, Syafrullah and Indra, Riyanto (2018) Motion tracker based wheeled mobile robot system identification and controller design. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 241-258. ISBN 9789811087875

Pebrianti, Dwi and Nurnajmin Qasrina, Ann and Luhur, Bayuaji and Nor Rul Hasma, Abdullah and Zainah, Md. Zain and Indra, Riyanto (2018) Extended Bat Algorithm (EBA) as an improved searching optimization algorithm. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 229-237. ISBN 978-981-13-3708-6

Puteri Fadzline, Muhamad Tamyez (2019) The Challenges and Solutions of Cybersecurity Among Malaysian Companies. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, IGI Global, pp. 103-125. ISBN 9781522590781

Putra Jaya, Ramadhansyah (2020) Porous concrete pavement containing nanosilica from black rice husk ash. In: New Materials in Civil Engineering. Elsevier Inc., United Kingdom, pp. 493-527. ISBN 978-0-12-818961-0

Putra Jaya, Ramadhansyah and Haryati, Yaacob and Norhidayah, Abdul Hassan and Al-Saffar, Zaid Hazim (2022) Effectiveness and efficiency of nano kaolin clay as bitumen modifier: Part A. In: Risk, Reliability and Sustainable Remediation in the Field of Civil and Environmental Engineering. Elsevier, Amsterdam, Netherlands, pp. 449-460. ISBN 9780323856980

Putra Jaya, Ramadhansyah and Masri, K. A. and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2022) Nano kaolin clay as bitumen modifier for sustainable development: Part B. In: Risk, Reliability and Sustainable Remediation in the Field of Civil and Environmental Engineering. Elsevier Inc., Amsterdam, Netherlands, pp. 461-475. ISBN 978-0-323-85698-0

Putra Jaya, Ramadhansyah and Siti Nur Amiera, Jeffry and Norhidayah, Abdul Hassan and Haryati, Yaacob and Ekarizan, Shaffie and Kamil, Arshad (2020) Chemical and physical characteristic of nano charcoal ash from coconut shell in bitumen as alternative binder. In: GREEN Infrastructure : Materials and Techniques. Universiti Malaysia Perlis, Perlis, pp. 97-117. ISBN 978-967-0922-90-4

R. A., Bakar and L. M., Gan and M. M., Tahir and A. A., Yusof (2017) Pre-charge pressure effects on isothermal and adiabatic energy storage capacity for dual hybrid hydro-pneumatic passenger car driveline. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 3-4. ISBN 9789670257884 (Unpublished)

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Anthropometry correlation towards archery performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 29-35. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Bio-Physiological Indicators in Evaluating Archery Performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 13-20. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Concluding remarks. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, p. 45. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psycho-fitness parameters in the identification of high-potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 37-44. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psychological variables in ascertaining potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 21-27. ISBN 978-981-13-2592-2

Radiah, Abdul Ghani and Habibah, Hassan and Athirah Nur, Ahmad Rosli and Ahmed Shogar, Ibrahim Adam and Ahmad Irfan, Ikmal Hisham (2018) Integration of Islamic principles in education of physiology of human digestive system. In: Rejuvenating Islamic Thought. IIUM Press, pp. 92-107. ISBN 978-967-491-010-5

Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4

Rajan, Jose and Nair, V. M. and Rajul, K. and Wariar, P. R. S. (2014) Optimized Combustion Synthesis and Characterization of Nanostructured Ba2RESbO6 Perovskites. In: Nanostructured Oxides and Materials. Penerbit Universiti Malaysia Perlis, Perlis, Malaysia, pp. 155-184. ISBN 978-967-5415-95-1

Rajaram, R. and Jawahar, N. and Ponnambalam, S. G. and Mukund Nilakantan, Janardhanan (2019) Multi objective optimization of economic and environmental aspects of a three-Echelon Supply Chain. In: Industry 4.0 and Hyper-Customized Smart Manufacturing Supply Chains. IGI Global, Hershey, PA, pp. 127-128. ISBN 9781522590781

Ramli, Muhammad Zaki and Nina Suhaity, Azmi (2022) Instruments for assessing Malaysian children’s oral health-related quality of life (OHRQOL): A mini systematic review. In: Applications of engineering and Technology in Bridging Technology and Community. Penerbit UMP, Kuantan, pp. 279-291. ISBN 978-967-2831-35-8

Ramli, Muhammad Zaki and Nina Suhaity, Azmi and Ismail, Ahmad Faisal (2021) Association between socioeconomic status, dental caries status and body mass index of children from two preschools in Kuantan: A preliminary report. In: 20th Annual Scientific meetin and 22nd Annual General meeting of IADR MalSec Proceeding. Proceeding The Resilient Researcher: Innovating Research In The New Normal, 2 . International Association for Dental Research - Malaysia Section (IADR-MalSec), Selangor, pp. 1-3. ISBN 978-967-2623-20-5

Ranganathan, Balu and Sun, Bingfeng and Feng, Si-Shen (2014) Multifunctional Poly(D,L-Lactide-co-Glycolide)/ Montmorillonite (PLGA/MMT) Nanoparticles Decorated by Trastuzumab for Targeted Chemotherapy of Breast Cancer. In: Chemotherapeutic Engineering: Collected Papers of Si-Shen Feng - A Tribute to Shu Chien on His 82nd Birthday. Pan Stanford Publishing Pte. Ltd., Singapore, pp. 567-594. ISBN 9789814463140 (print); 9789814463157 (ebook)

Rasidi, Roslan and Mohd Hasbi, Ab Rahim (2024) Morphology, rheology, properties, and applications of fullerene-filled polymer blends. In: Nanofillers for Binary Polymer Blends. Micro and Nano Technologies . Elsevier, Amsterdam, Netherlands, pp. 223-242. ISBN 978-0-323-88655-0

Razi, P. Z. and Saad, M. Syamsyul H. and Jamaludin, Omar (2021) Technical competencies of oil and gas construction project managers in Malaysia. In: Construction Engineering And Management. UMP Research Series, 1 . Penerbit UMP, Kuantan, pp. 60-76. ISBN 978-967-2831-41-9

Rohaida, Che Man and Nur Nadia, Mohd Zakaria and Nurul Nabila Huda, Baharudin (2022) Production of biopolymer from waste materials as the suitable alternative for plastics. In: Biotechnological Approaches in Waste Management. CRC Press, England, pp. 115-140. ISBN 9781003188292

Rohaida, Che Man and Shalyda, Md Shaarani and Nurul Nabila Huda, Baharudin and Nur Izyan, Wan Azelee (2022) Hollow fiber membrane as a carrier for enzyme immobilization. In: Enzyme Immobilization For Bioprocessing. Enzyme Immobilization for Bioprocessing . Penerbit UTM Press, Malaysia, pp. 289-320. ISBN 9789835218897

Roney, Miah and Hossain, Md. Sanower and Mohd Fadhlizil Fasihi, Mohd Aluwi (2022) In silico analysis for discovery of dengue virus inhibitor from natural compounds. In: Proceedings of the 4th International Conference Current Breakthrough in Pharmacy (ICB-Pharma 2022). Atlantis Highlights in Chemistry and Pharmaceutical Sciences, 3 . Atlantis Press, Amsterdam, Netherlands, pp. 1-10. ISBN 978-94-6463-050-3

Rosdi, Daud and Nurazlina, Sulaeman and Mas Ayu, Hassan and Arman Shah, Abdullah (2022) Prediction of Malaysian Talus Bone Morphology Using Artificial Intelligence. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer Science and Business Media Deutschland GmbH, Springer Link Malaysia, pp. 29-37. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)

Roshanida, A. Rahman and Shalyda, Md Shaarani (2022) Introduction to Enzyme Immobilization. In: Enzyme Immobilization For Bioprocessing. Penerbit UTM, Malaysia, pp. 1-10. ISBN 978-983-52-1889-7

Roslinazairimah, Zakaria and Noor Fadhilah, Ahmad Radi and Siti Rohani, Mohd Nor (2023) Skew-t Copula. In: Copula modelling and its application. UTM Press, Johor, Malaysia, pp. 153-172. ISBN 978-983-52-1962-7

Rossyuhaida, Mohd Zakria and Chua, Gek Kee and Jolius, Gimbun and Nor Shahirah, Mohd Nasir and Sook, Fun Pang and Mohd Fazli, Farida Asras and Cheng, C. K. and Ahmad Ziad, Sulaiman (2015) Optimisation of Bioethanol Yield from Oil Palm Trunk Sap. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 340-346. ISBN 978-967-0257-53-2

S. M., Zokri and L. A., Aziz and N. S., Arifin and M. K. A., Mohamed and Mohd Zuki, Salleh and Abdul Rahman, Mohd Kasim and N. F., Mohammad (2017) Boundary Layer Flow of Jeffrey Fluid over a Stretching Sheet with Convective Boundary Conditions: Application in Polymer Processing. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 437-439. ISBN 9789670257884

S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321

S.N.R, Ramli and S. H. S. M., Fadzullah and Z., Mustafa and M. R. M., Rejab and M. Z., Hassan (2017) The effect of varying pressure on mechanical performance of pineapple leaf fiber reinforced poly lactic acid biocomposites. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 305-307. ISBN 9789670257884

Saadiah, M. A. and A. F., Fuzlin and N. F., Mazuki and N. M., Ghazali and Ahmad Salihin, Samsudin (2023) Organic materials as polymer electrolytes for supercapacitor application. In: Advances in Electronic Materials for Clean Energy Conversion and Storage Applications. Woodhead Publishing, United Kingdom, pp. 365-394. ISBN 978-032391206-8

Saha, Priyanka and Monir, Minhaj Uddin and Sarkar, Shaheen M. and Azrina, Abd Aziz (2023) Noise pollution from oil, gas, and petrochemical industries. In: Crises in Oil, Gas and Petrochemical Industries : Volume 1: Disasters and Environmental Challenges. Elsevier, United Kingdom, pp. 419-434. ISBN 978-0-323-95154-8

Said Mohamed, Tarek Mohamed Mahmoud and Muhammad Amirul, Abdullah and Alqaraghuli, H. and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Mohd Azraai, Mohd Razman and Mohd Yazid, Bajuri and Anwar, P. P. Abdul Majeed (2021) The identification of significant mechanomyography time-domain features for the classification of knee motion. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering (730). Springer Verlag, Berlin, Germany, 313 -319. ISBN 978-981-33-4596-6

Saifful Kamaluddin, Muzakir (2011) Answer Scheme. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-9. ISBN 9789673211630

Saifful Kamaluddin, Muzakir (2011) Chapter 13: Heat. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 251-266. ISBN 9789673211630

Saifful Kamaluddin, Muzakir (2011) Chapter 14: Kinetic Theory of Gases. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 267-284. ISBN 9789673211630

Saifful Kamaluddin, Muzakir (2011) Chapter 25: Quantization of Light. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., pp. 1-12. ISBN 9789673211630

Saifful Kamaluddin, Muzakir (2011) Chapter 26: Wave Properties of Particle. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-10. ISBN 9789673211630

Saifful Kamaluddin, Muzakir (2011) Chapter 27: Bohr’s Model of Hydrogen Atom. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-13. ISBN 9789673211630

Saifful Kamaluddin, Muzakir and Nur Hidayati Ain Natasha, Makimin and Nur Farha, Shaafi and Ruziana, Mohamed and Muhammad Zamzuri, Abdul Kadir (2024) Multiple exciton generation in MoS2 nanostructures: A density functional theory study. In: Intelligent Manufacturing and Mechatronics: Selected Articles from iM3F 2023, 7–8 August, Pekan, Malaysia. Springer Nature Singapore Pte Ltd, Singapore, pp. 397-405. ISBN 978-981-99-9847-0

Saifful Kamaluddin, Muzakir and Zainal Abidin, Sulaiman and Siti Hendon, Sheikh Abdullah and Halimah, Mohamed Kamari and Zalita, Zainuddin (2011) Chapter 15: Thermodynamics. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 285-298. ISBN 9789673211630

Saiful Nizam, Tajuddin and Che Mohd, Aizal and M. M., Yusoff (2016) Resolution of Complex Sesquiterpene Hydrocarbons in Aquilaria malaccensis Volatile Oils Using Gas Chromatography Technique. In: Agarwood. Tropical Forestry . Springer, Singapore, pp. 103-124. ISBN 978-981-10-0832-0 (print); 978-981-10-0833-7 (online)

Sakib, Md. Nazmus and Asif Iqbal, AKM and Muhammad Nuruzzaman, Dewan (2021) Mechanical characterization of Carbon Fibre and Graphene Oxide Reinforced Epoxy Hybrid Composite. In: Lecture Notes in Mechanical Engineering. Lecture Notes in Mechanical Engineering book series (LNME . Springer Singapore, https://link.springer.com/bookseries/11236, pp. 155-161. ISBN 978-981-15-9505-9

Salih, Sinan Q. and Alsewari, Abdulrahman A. and Al-Khateeb, Bellal and Mohamad Fadli, Zolkipli (2019) Novel Multi-swarm Approach for Balancing Exploration and Exploitation in Particle Swarm Optimization. In: Recent Trends in Data Science and Soft Computing. Springer International Publishing, Cham, pp. 196-206. ISBN 978-3-319-99007-1

Sallam, Amer A. and M. Nomani, Kabir and Ahmed, Abdulghani Ali and Farhan, Khalid and Tarek, Ethar (2019) Epilepsy detection from EEG signals using artificial neural network. In: International Conference on Intelligent Computing & Optimization. Advances in Intelligent Systems and Computing . Springer Singapore, Singapore, pp. 320-327. ISBN 978-3-030-00979-3

Salloum, Said A. and Al-Emran, Mostafa and Monem, A. A. and Shaalan, Khaled (2017) Using text mining techniques for extracting information from research articles. In: Intelligent Natural Language Processing: Trends and Applications. Springer, Berlin, Germany, pp. 373-397. ISBN 9783319670553

Salloum, Said A. and AlHamad, Ahmad Qasim and Al-Emran, Mostafa and Shaalan, Khaled (2017) A survey of arabic text mining. In: Intelligent natural language processing: trends and applications. Springer, Berlin, Germany, pp. 417-431. ISBN 978-3-319-67056-0

Salman, Ahmad and Razman, Mat Tahar and Cheng, Jack Kie (2014) Simulating the Effect of Feed-In Tariff on Renewable Energy Penetration: A System Dynamics Approach. In: UNSPECIFIED UNSPECIFIED, pp. 717-721.

Salwa, Awang Akbar and Ahmad Syahiman, Mohd Shah and Ahmad Afif, Mohd Faudzi and Sabira, Khatun and Syamimi Mardiah, Shaharum and Nurhafizah, Abu Talip and Mohamad Shaiful, Abdul Karim (2018) Design of T-shaped UWB antenna with dual band rejection using inverted u- and c-shaped slots. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 467-474. ISBN 978-981-13-3708-6

Salwa, Awang Akbar and Ahmad Syahiman, Mohd Shah and Airul Sharizli, Abdullah and Nurhafizah, Abu Talip and Sabira, Khatun and Syamimi Mardiah, Shaharum and Mohamad Shaiful, Abdul Karim (2018) An accurate characterization of different water properties using resonant method for underwater communication activity. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineerin . Springer Singapore, Singapore, pp. 113-120. ISBN 978-981-13-3708-6

Samylingam, Lingenthiran and Kadirgama,, Kumaran and Aslfattahi, Navid and Samykano, M. (2022) Comparison of physical properties enhancement in various heat transfer nanofluids by MXene. In: Advances in Nanofluid Heat Transfer. Elsevier, Saudi Arabia, pp. 131-150. ISBN 9780323886420 (Printed) 9780323886567 (Online)

Santhana, Krishnan and Nur, Shahidah and Mohd Fadhil, Md Din and Puranjan, Mishra and Mohd Nasrullah, Zulkifli and Kadier, Abudukeremu and Shazwin, Mat Taib and Mohd Hafiz, Puteh and Norahim, Ibrahim and Nurfarhain, Md Rusli and Fadzlin, Md Sairan and Lakhveer, Singh (2022) Chapter 10 - Sustainable engineering of food waste into high-quality animal feed using a drying technology. In: Techno-economics and Life Cycle Assessment of Bioreactors. Post-Covid19 Waste Management Approach (10). Elsevier, India, pp. 167-184. ISBN 978-0-323-89848-5

Shakir, Hasan Awni and Jaber, Aws Naser (2018) A Short Review for Ransomware: Pros and Cons. In: Advances on P2P, Parallel, Grid, Cloud and Internet Computing: Proceedings of the 12th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC-2017). Lecture Notes on Data Engineering and Communications Technologies, 13 . Springer, Cham, Switzerland, pp. 401-411. ISBN 978-3-319-69835-9

Shalyda, Md Shaarani and Aizi Nor Mazila, Ramli and Nor Hasmaliana, Abdul Manas and Rabiatul Adawiyah, Ahmad and Siti Fatimah Zaharah, Mohd Fuzi and Zatul Iffah, Mohd Arshad (2023) Biofuel scale-up from waste source and strategies for cost optimization. In: Valorization of Wastes for Sustainable Development Waste to Wealth. Elsevier, pp. 155-180. ISBN 978-0-323-95417-4

Shariena, Shamsul Bahari and Fify Nursuhanti, Jahid and Yuen, Mei Lian and Ros Azlinawati, Ramli and Ling, Lee Siew (2022) Adsorption of Methylene Blue Using Tea Waste Treated with Alkaline-Potassium Hydroxide. In: Key Engineering Materials. Trans Tech Publications Ltd, Switzerland, pp. 59-69. ISBN 1662-9795

Shariena, Shamsul Bahari and Lian, Yuen Mei and Ros Azlinawati, Ramli and Ling, Lee Siew (2022) Photodegradation of Reactive Blue 4 Using Suspension of Anatase Titanium Dioxide and Corn Cob. In: Materials and Technologies of Modern Production. Key Engineering Materials, 932 . Trans Tech Publications Ltd, Switzerland, pp. 45-58. ISBN 1662-9795

Sharma, Swati and Gupta, Arun and Kumar, Ashok (2018) Keratin: an introduction. In: Keratin as a Protein Biopolymer. Springer Series on Polymer and Composite Materials . Springer Nature Switzerland, Springer, Cham, pp. 1-18. ISBN 978-3-030-02901-2

Shi Chuan, Soh and M. Z., Ibrahim and Marlina, Yakno and D.J., Mulvaney (2017) Palm vein recognition using scale invariant feature transform with RANSAC mismatching removal. In: IT Convergence and Security 201. Lecture Notes in Electrical Engineering, 449 . Springer Verlag, Berlin, Germany, pp. 1-8. ISBN 978-981106450-0

Shovon, Shaik Muntasir and Akash, Faysal Ahamed and Monir, Minhaj Uddin and Ahmed, Mohammad Tofayal and Azrina, Abd Aziz (2024) Membrane technology for CO2 removal from CO2-rich natural gas. In: Advances in Natural Gas: Formation, Processing, and Applications. Volume 2: Natural Gas Sweetening. Advances in Natural Gas . Elsevier Ltd, pp. 487-508. ISBN 9780443192173

Siddiqui, Muhammad Faisal and Singh, Lakhveer and Zularisam, A. W. (2017) Treatment of Dye Wastewater for Water Reuse Using Membrane Bioreactor and Biofouling Control. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 121-136. ISBN 9783319495958 (online); 9783319495941(print)

Sim, Lan Ching and Yee, Pey Li and Leong, Kah Hon and Azrina, Abd Aziz and Hossen, Md. Arif (2024) CO2 photoreduction to hydrocarbons and oxygenated hydrocarbons. In: Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion. Carbon Dioxide Conversion to Chemicals and Energy . Elsevier, Amsterdam, Netherlands, pp. 257-272. ISBN 978-0-443-19235-7

Sin, Yi Lim and Mohd Saberi, Mohamad and Lian, En Chai and Safaai, Deris and Weng, Howe Chan and Sigeru, Omatu and Muhammad Farhan, Sjaugi and Muhammad Mahfuz, Zainuddin and Gopinathaan, Rajamohan and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2016) Investigation of the Effects of Imputation Methods for Gene Regulatory Networks Modelling Using Dynamic Bayesian Networks. In: Distributed Computing and Artificial Intelligence, 13th International Conference. Springer International Publishing, pp. 413-421. ISBN 978-3-319-40161-4

Sing, Jason Fung Chee and Lee, Khai Loon (2023) Enhancing order management with ERP systems: A case study in a subcontractor company. In: Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, pp. 25-35. ISBN 978-967-2831-89-1

Siregar, J. P. and Z. M., Hafizi and M. R. M., Rejab and Jamiluddin, Jaafar and Mohammad Hazim, Mohamad Hamdan and Bachtiar, Dandi and Tezara, C. and S. M., Sapuan (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. In: Unsaturated Polyester Resins: Fundamentals, Design, Fabrication and Applications. Elsevier, Amsterdam, Netherlands, pp. 489-514. ISBN 978-0-12-816129-6

Siti Afiqah, Kamaruzaman (2017) Case on Customized Logistics Services. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 26-31. ISBN 978-967-2054-50-4

Siti Fatihah, hazali and Syamimi Mardiah, Shaharum and Ahmad Afif, Mohd Faudzi and Sabira, Khatun and Mohamad Shaiful, Abdul Karim and Nurhafizah, Abu Talip (2018) Design of Ultra-Wideband (UWB) horn antenna for non-destructive fruit quality monitoring. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 515-521. ISBN 978-981-13-3708-6

Siti Maizatul Ameera, Azhar and Muyang, Brody Sambang and Gaanty Pragas, Maniam and Nurlin, Abu Samah (2022) Synthesis and Characterization of Molecularly Imprinted Polymer with Oleic Acid as a Template. In: Key Engineering Materials. Trans Tech Publications Ltd., pp. 71-76. ISBN 10139826

Siti Maznah, Kabeb and Nurul Huda, Abu Bakar (2023) Polymer blend nanocomposites for polymer electrolyte membrane fuel cell (PEMFC) applications. In: Polymer Blend Nanocomposites for Energy Storage Applications. Elsevier Ltd, United Kingdom, pp. 479-493. ISBN 978-0-323-99549-8

Siti Noraini, Abdul Malek (2017) Case on How to Improve of Supply Chain Productivity. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 11-17. ISBN 978-967-2054-50-4

Siti Noraishah, Ismail and Azizan, Ramli (2021) Does Human Factor Contribute to Mining Accidents? A Systematic Literature Review Approach. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 593-599. ISBN 978-981-16-4114-5

Siti Normaziah, Ihsan and Tuty Asmawaty, Abdul Kadir and Benedict, R. and A. R., Abdullah (2020) Preventive self-care serious games for diabetes: a game design. In: The 6th International Conference on Software Engineering & Computer Systems. IOP Conference Series: Materials Science and Engineering, 769 (1). IOP Publishing, pp. 1-11. ISBN 1757-899X

Siti Rabiatull Aisha, Idris and M., Ishak and Luqman Hakim, Ahmad Shah (2017) The Effect of ER4043 and ER5356 Filler Metal on Welded Al 7075 by Metal Inert Gas Welding. In: High Performance and Optimum Design of Structures and Materials II. WIT Transactions on The Built Environment, UK, pp. 213-224. ISBN 978-1-78466-143-4

Siti Rabiatull Aisha, Idris and Nabila, Tamar Jaya and Muhammad Asyraf, Abdullah (2022) The Effect of Laser Soldering onto Intermetallic Compound Formation, Growth. In: Recent Progress in Lead-Free Solder Technology. Springer, Switzerland AG, pp. 265-282. ISBN 978-3-030-93441-5

Sivanesan, Pavethra and Zatul Iffah, Mohd Arshad and Jun Haslinda, Shariffuddin and Nasratun, Masngut and Norazwina, Zainol and Shalyda, Md Shaarani (2022) Factorial analysis of xylanase and cellulase production from pineapple peel waste. In: Materials Science Forum. Trans Tech Publications Ltd, Switzerland, pp. 241-253. ISBN 1662-9752

Sorooshian, Shahryar (2017) Structural Equation Modeling Algorithm and Its Application in Business Analytics. In: Organizational Productivity and Performance Measurements Using Predictive Modeling and Analytics (Advances in Business Information Systems). IGI Global, Pennsylvania (USA), pp. 17-39. ISBN 9781522506546

Subramaniam, Bawani and Sorooshian, Shahryar (2017) Case on System Performance Improvement. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 2-5. ISBN 978-967-2054-50-4

Suhail Najm, Shahab and Ayib Rosdi, Zainun and Nurul Hazlina, Noordin and Izzeldin, I. Mohd and Essa Ibrahim, Essa and A. Omar, Khaldoon (2017) MVDR beamformer model for array response vector mismatch reduction. In: Communication, Management and Information Technology. CRC Press, Leiden, The Netherlands, pp. 131-138. ISBN 978-1-315-37508-3 (online); 9781138029729 (printed)

Sunarti, Abd Rahman and Roshan, Raj Krishna and Norhidayana, Mandayar and Nadia Sofea, Hazleen and Sureena, Abdullah (2019) Methane purification from landfill using PVC based membrane. In: Gas Separation: Techniques, Applications and Effects. Chemistry Research and Applications (Chapter 3). Nova Science Publishers, Hauppauge, NY, pp. 119-139. ISBN 978-1-53614-606-6

Syahrizal, Salleh and Roslinazairimah, Zakaria and Siti Roslindar, Yaziz (2024) Battery electric vehicle charging load forecasting using LSTM on STL trend, seasonality, and residual decomposition. In: Recent Advances on Soft Computing and Data Mining. Lecture Notes in Networks and Systems, 1078 . Springer Cham, Switzerland, pp. 327-336. ISBN 978-3-031-66965-1

T., Senthil Kumar (2017) Case on “To buy, or not to Buy”. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 38-43. ISBN 978-967-2054-50-4

Taguchi, S. and Iwata, T. and Abe, H. and Doi, Y. and S. N., Aqida (2016) Poly(hydroxyalkanoate)s. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-28. ISBN 978-0-12-803581-8

Tan, Suat Hian and Ma, Nyuk Ling and Wan Nurul Hidayah, W. A. Analysis of the comparative study on flower pigments with phenylalanine ammonia-lyase activity in orchid plants. In: Challenging Issues on Environment and Earth Science. B P International, India. United Kingdom, pp. 79-89. ISBN 978-93-90888-11-5 (Print) 978-93-90888-19-1 (eBook)

Tan, Yeong Yu and Doh, Shu Ing and Chin, Siew Choo (2016) Addition of Natural Lime in Incinerated Sewage Sludge Ash Concrete. In: Engineering Challenges for Sustainable Future: Proceedings of the 3rd International Conference on Civil, Offshore and Environmental Engineering (ICCOEE 2016, Malaysia, 15-17 Aug 2016). Taylor& Francis Group, London, pp. 433-437. ISBN 9781138029781

Tan, Yeong Yu and Doh, Shu Ing and Chin, Siew Choo (2018) Durability Analysis of Natural Lime Concrete. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer Nature, Singapore, pp. 283-290. ISBN 978-981-13-0074-5

Tang, Jin Cheng and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Thai, Li Lim (2022) Vision-based Human Presence Detection by Means of Transfer Learning Approach. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering, 900 . Springer, Singapore, Singapore, pp. 571-580. ISBN 978-981-19-2094-3 (Printed); 978-981-19-2095-0 (Online)

Tengku Hasanul, Firdaus (2017) Case on Delivery Performance Improvement. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 6-10. ISBN 978-967-2054-50-4

Teo, Ellie Yi Lih and Chong, Kwok Feng (2024) Electrochemical characterization and calculation methods of supercapacitors. In: Supercapacitors: Materials, Design, and Commercialization. Elsevier Inc., Amsterdam, Netherlands, pp. 71-91. ISBN 978-0-443-15478-2

Thalji, Mohammad R. and M. Ali, Gomaa A. and Chong, Kwok Feng (2022) History and Progress of Polymers for Energy Applications. In: Polymers in Energy Conversion and Storage. CRC Press, Boca Raton, Florida, pp. 1-19. ISBN 978-0-367-77081-5 (Printed); 978-1-003-16972-7(Online)

Thong, Weng Jie and M. A., Ameedeen (2015) A Survey of Petri Net Tools. In: Advanced Computer and Communication Engineering Technology: Proceedings of the 1st International Conference on Communication and Computer Engineering. Lecture Notes in Electrical Engineering, 315 (Ch. 51). Springer, Switzerland, pp. 537-551. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Thum, Wei Seong and M. Z., Ibrahim and Nurul Wahidah, Arshad and D.J., Mulvaney (2017) Result comparison of model validation techniques on audio-visual speech recognition. In: IT Convergence and Security 2017. Lecture Notes in Electrical Engineering, 449 . Springer, Singapore, Berlin, Germany, pp. 1-8. ISBN 978-981-10-6450-0 (Print); 978-981-10-6451-7 (online)

Tie, K. H. and A., Senawi and Chuan, Z. L. (2022) An observation of different clustering algorithms and clustering evaluation criteria for a feature selection based on linear discriminant analysis. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering book series (LNEE), 800 . Springer Nature Singapore Ptd. Ltd., Singapore, pp. 497-505. ISBN 978-981-19-2094-3(Printed); 978-981-19-2095-0 (Online)

Uddin Monir, Minhaj and Azrina, Abd Aziz and Khatun, Fatema and Tarek, Mostafa and N. Vo, Dai-Viet (2022) Chapter 11 - Sequestration of carbon dioxide into petroleum reservoir for enhanced oil and gas recovery. In: Carbon Dioxide Capture and Conversion Advanced Materials and Processes. Elsevier, New Delhi, India, pp. 291-309. ISBN 9780323855853

Umi Kalsom, Masrom and Nik Aloesnita, Nik Mohd Alwi (2021) Blended Learning Impacts on Higher Education: What Have Research Revealed? In: Enhancing The Teaching And Learning Of English At Malaysian Tertiary Education. Penerbit Unisza, Terengganu, pp. 31-54. ISBN 978-967-2231-80-6

Umi Kalsom, Masrom and Nik Mohd Alwi, Nik Aloesnita (2021) Blended learning impact on higher education: What have research revealed? In: Enhancing the teaching and learning of English at Malaysian tertiary education. Penerbit Universiti Sultan Zainal Abidin, Kuala Nerus, Terengganu, pp. 31-54. ISBN 978-967-2231-79-0

Umi Rabiatul Ramzilah, P. Remli and Azrina, Abd Aziz and Lan, Ching Sim and Minhaj Uddin, Monir and Kah Hon, Leong (2023) Photocatalytic applications of carbon quantum dots for wastewater treatment. In: Carbon Quantum Dots for Sustainable Energy and Optoelectronics. Elsevier, pp. 263-294. ISBN 9780323908955

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Preiser, Jean-Charles (2014) Incretin Effects and Enteral Feed Transitions. In: Diet and Nutrition in Critical Care. Springer, New York, pp. 1-14. ISBN 978-1-4614-8503-2 (online)

Usop, Nur Alya Afikah and Hisham, Syifak Izhar (2021) A review of digital watermarking techniques, characteristics and attacks in text documents. In: Advances in Robotics, Automation and Data Analytics. Advances in Intelligent Systems and Computing, 1350 (1350). Springer, Switzerland, pp. 256-271. ISBN 978-3-030-70916-7

Uyi Osazuwa, Osarieme and Sumaiya, Zainal Abidin (2019) The application of ion-exchange resins in hydrogenation reactions. In: Applications of Ion Exchange Materials in Chemical and Food Industries. Springer Nature, Basingstoke, United Kingdom, pp. 19-33. (Unpublished)

Vaishak, Sunil and Rajan, Jose (2022) Hybrid Nanocomposite Metal Oxide Materials for Supercapacitor Application. In: Chemically Deposited Nanocrystalline Metal Oxide Thin Films. Springer Nature, Switzerland AG, pp. 673-724. ISBN 978-3-030-68462-4

Varun, Geetha Mohan and Mohamed Ariff, Ameedeen and Saiful, Azad (2022) A supervised learning neural network approach for the prediction of supercapacitive energy storage materials. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering (LNEE), 730 . Springer Link, Springer, Singapore, pp. 849-858. ISBN 978-981-33-4596-6(Printed); 978-981-33-4597-3(Online)

Vaughan, A. and Davis, D. S. and Hagadorn, J. R. and Salwani, Mohd Salleh (2017) Industrial Catalysts for Alkene Polymerization. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, pp. 1-18. ISBN 978-0-12-803581-8

W. N. A. W., Azahar and Putra Jaya, Ramadhansyah and N., Kasim and N., Ismail and Nadiah, Md Husain and S. A., Saad and S. A., Masjuki and S. L., Ibrahim and A. B., Ramli and N. K., Basri (2019) Investigation on Compatibility Property Between Aggregates and Bitumen Modified with Untreated and Treated Waste Cooking Oil. In: AWAM International Conference on Civil Engineering. Lecture Notes in Civil Engineering, 53 . Springer Nature Switzerland, Switzerland, pp. 933-942. ISBN 978-3-030-32816-0

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

Wan Ismail, Ibrahim and Raja Mohd Taufika, Raja Ismail and Mohd Rusllim, Mohamed (2020) Direct power control method of maximum power point tracking (MPPT) algorithm for Pico-Hydrokinetic River Energy Conversion System. In: InECCE2019. Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering, Kuantan, Pahang, Malaysia, 29th July 2019, 632 (1). Springer Singapore, Singapore, pp. 1-12. ISBN 978-981-15-2316-8

Wan Ismail, Wan Norfazilah and Mokhtar, Siti Umairah (2021) Various methods for removal, treatment, and detection of emerging water contaminants. In: Emerging Contaminants. IntechOpen, London, pp. 1-27. ISBN 978-1-83962-419-3

Wan Jumani, Fauzi and Ezihaslinda, Ngah and Noor Raha, Mohd Radzuan and Amy Zulaikha, Mohd Ali and Noor Azlinda, Zainal Abidin and Hazlina, Abdullah (2019) Developing effective listening skills for oral group discussions. In: Best Practices In Education Management: Teaching, Learning And Research. Kaizentrenovation Sdn Bhd, Tg Malim, Perak, pp. 141-147. ISBN 978-967-17400-0-2

Wan Nur Firdaus, Wan Hassan and Mohamed A., Ismail and Han, Seung Lee and Mohd Warid, Hussin and Khairunisa, Muthusamy (2018) Strength Development of High Performance Concrete Utilising Micro Pofa. In: Sustainable Special Concrete. Penerbit UMP, Kuantan, Pahang, pp. 15-28. ISBN 978-967-2054-75-7

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abdul Rahman and Abdul Latif, Ahmad and Nadzirah, Mohd Mokhtar and Hasrinah, .Hasbullah (2022) Investigating Thin-Film Composite Membranes Prepared by Interaction between Trimesoyl Chloride with M-Phenylenediamine and Piperazine on Nylon 66 and Performance in Isopropanol Dehydration. In: Advanced Materials for Wastewater Treatment and Desalination. CRC Press, Boca Raton, pp. 80-99. ISBN 9781003167327(Online)

Wang, Wei and Rahman, Md. Arafatur and Ali, Md Jahan and Bhuiyan, Md Zakirul Alam and Liu, Yao and Hai, Tao (2018) Overview of Logistics Equilibrium Distribution Networks System: An Urban Perspective. In: SpaCCS 2018: Security, Privacy, and Anonymity in Computation, Communication, and Storage. Lecture Notes in Computer Science, 11342 . Springer, Cham, pp. 282-293. ISBN 978-3-030-05345-1

Weihs, G. A. Fimbres and Picazo, Francisco Javier García and Chong, Yie Kai and Lam, Wen Yew and Tan, Jia Xin and Foo, Kathleen and Twong, Weng Fung and Liang, Y. Y. (2024) CFD as a tool for modelling membrane systems. In: Experimental Methods for Membrane Applications in Desalination and Water Treatment. IWA Publishing, London, UK, pp. 1-45. ISBN 9781789062977

Widiyanesti, Sri and Fernando, Yudi (2018) A Review of Supply Chain Risk Management in Agribusiness Industry. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5550-5558. ISBN 9781522522553

Wintermantel, E. and Mayer, J. and Goehring, T. N. and S. N., Aqida (2016) Composites for Biomedical Applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-8. ISBN 978-0-12-803581-8

Wong, Joon Fatt and Azman, Hassan and Chan, Jia Xin and Siti Maznah, Kabeb (2022) Plastics in corrosion resistant applications. In: Encyclopedia of Materials: Plastics and Polymers. Elsevier Ltd, Amsterdam, 136 -148. ISBN 978-0-12-823291-0

Wulansari, Puspita and Fernando, Yudi (2018) Developing Global Supply Chain Manager for Business Expansion. In: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes). IGI Global USA, Hershey PA, pp. 5327-5334. ISBN 9781522522553

Xue, Ting Lim and Lee, Khai Loon (2022) Supply chain drivers as a competitive advantage in hospitality company: A case study. In: In Individual Field Project: Applying Theoretical Know-how to Real-life Business and Engineering Situation. Penerbit UMP, Kuantan, Pahang, pp. 67-80. ISBN 978-967-2831-28-0

Yap, H. T. and Ngien, S. K. and Norasman, Othman and Norhan, Abd Rahman and Choo, C. M. (2018) Effect of Inflow and Infiltration in Sewerage System of Residential Area, Kuantan, Pahang. In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016). Springer, Singapore, pp. 333-343. ISBN 978-981-13-0074-5

Yasmin, Abdul Wahab and Syazwani Amanina, Syakyean and Zainah, Md. Zain and Nor Maniha, Abd Ghani and Maziyah, Mat Noh (2018) Initial study of multiple excitation source for electrical resistance tomography in steel pipe application. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 353-359. ISBN 978-981-13-3708-6

Yousuf, Abu and Khan, Maksudur R. and Pirozzi, Domenico and Zularisam, A. W. and Atnaw, Samson M. (2017) Economic and Market Value of Biogas Technology. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 137-158. ISBN 9783319495958 (online); 9783319495941(print)

Youventharan, Duraisamy (2019) Geomechanical Behavior of Bio-Cemented Sand for Foundation Works. In: Use of Sandy Materials in Civil Engineering. IntechOpen, London, pp. 1-21. ISBN 978-1-78985-836-5

Youventharan, Duraisamy and Jeevithan, K. M. and Rokiah, Othman and Mohd Arif, Sulaiman (2023) Suitability of conventional ballast mixed with concrete debris and bottom ash waste. In: Advanced Materials, Technologies and Technological Processes. Key Engineering Materials, 942 . Trans Tech Publications, Switzerland, 103 -116.

Yus Erny Amirah, Mohd Yusof and Muhammad Afiq, Ahmad and Aiman, M. H. and Moinuddin, Mohammed Quazi and Mahadzir, Ishak (2022) Effect of laser frequency and focal length on copper surface temperature during laser heating. In: International Conference on Mechanical Engineering Research (ICMER): Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering book series (LNME) . Springer Singapore, Singapore, pp. 839-846. ISBN 978-981-19-1457-7 (Online); 978-981-19-1456-0 (Printed)

Yusuf, Muhammad Fakhrul and Ramle, Rashidah and Abdullah, Norhazirawani (2022) Pressures on manufacturing industry to practice green supply chain management in Malaysia. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering, 1 . Springer, Singapore, pp. 625-636. ISBN 978-981-19-2889-5

Yuvaraj, Ganesan and Hasnah, Haron and Azlan, Amran and Say, Keat Ooi (2017) Corporate Social Responsibility in SMEs: The Role of Non-Audit Services. In: Small and Medium Enterprises in Developing Countries. IGI Global, pp. 345-359. ISBN 9781522521662

Z. M., Hafizi and M. M., Noor and R., Mamat and Amir, Aziz and A. T., Termizi (2018) Finite element analysis of strand burner. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Intelligent Manufacturing & Mechatronics . Springer Singapore, Singapore, pp. 705-714. ISBN 9789811087875

Zafril Rizal, M Azmi and M. A., Ameedeen and Imran Edzereiq, Kamarudin (2015) Multi-objective Functions in Grid Scheduling. In: Advanced Computer and Communication Engineering Technology. Lecture Notes in Electrical Engineering, 315 . Springer International Publishing, Switzerland, pp. 501-524. ISBN 978-3-319-07673-7 (print); 978-3-319-07674-4 (online)

Zahari, Taha and Anwar, P. P. Abdul Majeed and Ismail, Mohd Khairuddin and M. Y., Wong and M. A., Abdullah and M. A., Mohd Razman (2017) The Control of an Upper-Limb CC by Means of a Particle Swarm Optimized Active Force Control for Motor Recovery. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 56-62. ISBN 978-981-10-3736-8

Zahari, Taha and Anwar, P. P. Abdul Majeed and M. A., Abdullah and I.M., Khairuddin and M.A., Zakaria and M. H. A., Hassan (2017) The identification and control of an upper extremity exoskeleton for motor recovery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), p. 483. ISBN 9789670257884

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

Zahari, Taha and Mohd Azraai, M. Razman and N. F., Adnan (2018) The Identification of hunger behaviour of lates calcarifer using k-nearest neighbour. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 393-399. ISBN 9789811087875

Zahari, Taha and Muhammad Muaz, Alim and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Mohd Ali Hanafiah, Shaharudin and M. H. A., Hassan (2018) The identification and control of a finger exoskeleton for grasping rehabilitation. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 177-182. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and M. H. A., Hassan (2018) Classification of high performance archers by means of bio-physiological performance variables via k-nearest neighbour classification model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 377-384. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and M. H. A., Hassan (2018) Talent identification of potential archers through fitness and motor ability performance variables by means of artificial neural network. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 371-376. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan (2018) The application of support vector machine in classifying potential archers using bio-mechanical indicators. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 385-391. ISBN 9789811087875

Zahari, Taha and Rabiu Muazu, Musa and M.R., Abdullah and M. H. A., Hassan and M. A. M., Razman and Anwar, P. P. Abdul Majeed (2017) Reliability testing of inertial measurement units in the analysis of physiological variables in archery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 140-141. ISBN 9789670257884

Zaied, Khalid and Ahasanul, Karim and Pramod, Jadhav and Puranjan, Mishra and Zularisam, Abdul Wahid and Mohd, Nasrullah (2022) Environmental and economic life cycle assessment of biochar use in anaerobic digestion for biogas production. In: Techno-economics and Life Cycle Assessment of Bioreactors;. Post-Covid19 Waste Management Approach . Elsevier, India, pp. 185-206. ISBN 978-0-323-89848-5

Zailani, Abdullah and Amir, Ngah and Herawan, Tutut and Noraziah, Ahmad and Siti Zaharah, Mohamad and Abdul Razak, Hamdan (2017) ELP-M2: An Efficient Model for Mining Least Patterns from Data Repository. In: Recent Advances on Soft Computing and Data Mining: The Second International Conference on Soft Computing and Data Mining (SCDM-2016), Bandung, Indonesia, August 18-20, 2016 Proceedings. Advances in Intelligent Systems and Computing (AISC), 549 . Springer, Cham, pp. 224-232. ISBN 978-3-319-51279-2

Zainah, Md. Zain and Khairil Ashraff, Ab Rahim (2018) X4-ROV: the open source underwater vehicle. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 327-342. ISBN 9789811087875

Zainah, Md. Zain and Nurul Ain, Mohamed and Maziyah, Mat Noh and Pebrianti, Dwi (2018) Backstepping control of nonholonomic car-like mobile robot in chained form. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 173-180. ISBN 978-981-13-3708-6 (Unpublished)

Zakaria, Abas and Elia, Godoong and Hamzah, Tangki and Waidi, Sinun and Lokman Hakim, Sulaiman and Syed Sharizman, Syed Abdul Rahim and Mohammad Saffree, Jeffree and Nik Aloesnita, Nik Mohd Alwi and Najjah Salwa, Abd Razak and lzwandy, Idris (2022) Best SDG leadership practices. In: Share model for leaders. Penerbit Universiti Malaysia Sabah, Kota Kinabalu, Sabah, pp. 105-139. ISBN 978-967-2738-31-2

Zamzuri, Hamedon and I., Razemi and Ahmad Rosli, Abdul Manaf and Nafrizuan, Mat Yahya (2018) Innovative method of measuring electrode wear during EDM drilling process using vision system. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 53-63. ISBN 9789811087875

Zetty Ain, Kamaruzzaman and Zaini, Muhamad Zuhaili and Noraina Mazuin, Sapuan (2021) Put an End to Manual Data Entry: How Small Businesses Can Adapt The Changes and Transform? In: Service and Operation Management (Series 3). Series 3 . Penerbit UTHM, Batu Pahat, Johor. ISBN 978-967-2817-33-8

Zubair, Khalil (2017) Case on Quality Engineering: Acceptance Sampling. In: Collection of Teaching Cases for Business Administration Studies. Penerbit UMP, Kuantan, Pahang, pp. 44-59. ISBN 978-967-2054-50-4

Zuhairah, Zulkfli and M. Faris, Zaidi and Fatchurrohman, Nanang and Zamzuri, Hamedon (2022) Investigation on the Effect of Machining Parameters on Mechanical Properties of Friction Stir Processed Mg–Al-Micro Al2O3 Metal Matrix Composites. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer Nature Singapore, Singapore, pp. 589-598. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Online)

Zulkifli, Ahmad@Manap and Tan, Choon Mong (2016) Development of Portable Biofeedback Devices for Sport Applications. In: Proceedings of the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015 (ICoSSEET 2015). Springer, Singapore, pp. 55-66. ISBN 978-981-287-690-4 (print); 978-981-287-691-1 (online)

Zulsyazwan, Ahmad Khushairi and Hafizuddin, Wan Yussof and Norazwina, Zainol (2018) Optimization of ferulic acid production from oil palm frond bagasse. In: Sustainable Technologies for the Management of Agricultural Wastes. Springer, Singapore, pp. 57-69. ISBN 9789811050619(print); 9789811050626(online)

Zuraina, Ali (2022) Feminism, Engineering, and Technology: Possibilities and Dilemmas. In: Emerging Trends and Challenges in English Literature, Art and Culture. Publication Bureau, Sri Guru Teg Bahadur Khalsa College, Anandpur Sahib, Punjab, India, India, pp. 34-43. ISBN 978-81-956817-1-6

Zuraina, Ali (2022) The Making of Leaders Through Involvement in Curricular Activities: A Systematic Literature Review. In: Masa Depan Pembelajaran Kokurikulum: Badan Beruniform, Kepimpinan & Kesukarelawan, Keusahawanan & Pengurusan, Sukan, Kebudayaan & Rekreasi, Sains, Teknologi & Inovasi. Penerbit UMP, Kuantan, Pahang, pp. 99-113. ISBN 978-967-2831-46-4

Zuraina, Ali and Puteri Azlian, Megat Ramli and Abdul Rashid, Abdul Aziz (2021) Pandemik COVID-19: Cabaran dan Solusi dalam Pendidikan Anak-Anak. In: COVID-19 dari perspektif sains sosial: Implikasi dan solusi. Penerbit UMP, Kuantan, Pahang, pp. 55-74. ISBN 978-967-2831-09-9