Browse by Author All List

A

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Effect of laser surface modification (LSM) on laser energy absorption for laser brazing. In: OP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019) , 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 788 (012013). ISSN 1757-899X (Published)

A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X (Published)

Aiman, Mohd Halil (2016) Ohmic contact formation of gallium nitride and electrical properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

I

Irfan, Azman and Aiman, Mohd Halil and Mahadzir, Ishak@Muhammad and Moinuddin Mohammed, Quazi (2024) Parametric analysis of process loop and scanning line distance in laser cleaning of corrosion on boron steel. In: 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12-13 September 2023 , Kuantan. pp. 1-13., 2688 (012018). ISSN 1742-6588 (Published)

K

Ku Ahmad Irfan Fitri, Adzman and Aiman, Mohd Halil and Mahadzir, Ishak@Muhammad and Mohd Fadhlan, Mohd Yusof and Luqman Hakim, Ahmad Shah (2024) Effect of laser process loops on the hole diameter and hole formation of laser micro drilling on tc4. In: 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12-13 September 2023 , Kuantan. pp. 1-12., 2688 (012013). ISSN 1742-6588 (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris and Aiman, Mohd Halil and Nur Zalikha, Khalil (2017) Hardness Variation of Welded Boron Steel Using Continuous Wave (CW) and Pulse Wave (PW) Mode of Fiber Laser. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-5., 238 (012007). ISSN 1757-899X (Published)

M

Mohd Rhafiq, Mazlan and Nashrah Hani, Jamadon and Mohd Azlan, Aripin and Abu Bakar, Sulong and Aiman, Mohd Halil and M., Ishak and Shamini, Janasekaran (2024) Effect of laser speed on neck formation in SS316L powder joining for LPBF. Journal of Materials Research and Technology, 32. 3382 -3389. ISSN 22387854. (Published)

Mohd Harizan, Zul and Mahadzir, Ishak and Aiman, Mohd Halil and Ramdziah, Md Nasir and Moinuddin, Mohammed Quazi (2024) Superhydrophobic surface of Ti6Al4V using direct nanosecond laser texturing. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 117-132. ISSN 2756-8210. (Published)

Mohd Harizan, Zul and Mahadzir, Ishak and Ramdziah, Md Nasir and Aiman, Mohd Halil and Moinuddin, Mohammed Quazi (2024) Effect of multi-geometrical laser pattern of Ti6Al4V on frictional wear behaviour. Jurnal Tribologi, 40. pp. 78-94. ISSN 2289-7232. (Published)

Mohd Harizan, Zul and Mahadzir, Ishak and Aiman, Mohd Halil and Ramdziah, Md Nasir and Moinuddin, Mohammed Quazi (2024) Superhydrophobic Surface of Ti6Al4V using Direct Nanosecond Laser Texturing. Journal of Advanced Research in Micro and Nano Engineering, 17 (1). pp. 117-132. ISSN 2756-8210. (Published)

Mohd Harizan, Zul and M., Ishak and Aiman, Mohd Halil and Quazi, M. M. (2022) Fabrication of Superhydrophobic on Ti6Al4V by Using the Hybrid Process of Nanosecond Laser Texturing. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 341-350.. ISSN 2195-4356 ISBN 978-981-19-4424-6 (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and Quazi, M. M. and Aiman, Mohd Halil and Yamasaki, Kazuhiko (2021) Pulsed ND YAG laser parameter effect on welding uncoated Advanced High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

Muhammad Naqiuddin, Mat Salleh and Mahadzir, Ishak and Yamasaki, Kazuhiko and Moinuddin, Mohammed Quazi and Aiman, Mohd Halil (2021) Pulsed Nd: YAG laser parameters effect on welding uncoated Advance High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab. Aziz and Mohd Mawardi, Saari and Aiman, Mohd Halil and Nurul A’in, Nadzri and Ahmad Jamil Sulaiman, Hanifah (2020) Development of an unsaturated differential magnetic probe for the visualization of back-side slits with different directions on carbon steel plate. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 1-4. (9232487). ISBN 978-172815313-1 (Published)

M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981 (Published)

Mohd Mawardi, Saari and Mohd Aufa Hadi Putera, Zaini and Nurul Ain, Nadzri and Mohd Herwan, Sulaiman and Aiman, Mohd Halil and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2020) Characterization of sub-millimeter backside-slit defects on galvanized steel plates using a phase-sensitive AMR gradiometer and low excitation frequency. In: The 7th International Conference on Superconductivity and Magnetism (ICSM2020) , 19-25 April 2020 , La Blanche Island Bodrum Milas-Bodrum, Turkey. pp. 1-15.. (Unpublished) (Unpublished)

Mohd Aufa Hadi Putera, Zaini and Mohd Mawardi, Saari and Nurul A'in, Nadzri and Aiman, Mohd Halil and Ahmad Jamil Sulaiman, Hanifah and M., Ishak (2020) Effect of excitation frequency on magnetic response induced by front- and back-side slits measured by a differential AMR sensor probe. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29 July 2019 , Kuantan, Pahang, Malaysia. pp. 15-24., 632. ISBN 978-981-15-2316-8 (Published)

Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and Mohd Mawardi, Saari and Tsukada, Keiji and Nurul A’in, Nadzri (2019) An MFL probe using shiftable magnetization angle for front and back side crack evaluation. In: 15th IEEE Colloquium on Signal Processing and its Applications (CSPA 2019) , 8-9 March 2019 , Penang, Malaysia. pp. 1-5.. ISBN 978-153867563-2 (Published)

M., Ishak and M. N. M., Salleh and Aiman, Mohd Halil and A. M., Hanafi (2018) Investigation on the weld geometry of fiber laser dissimilar welded of boron steel for TWB application. In: Joining and Welding Symposium 2018 (JWS 2018) , 23 October 2018 , Library, UMP Pekan. pp. 1-10.. (Unpublished) (Unpublished)

M. N. M., Salleh and M., Ishak and M. M., Quazi and Aiman, Mohd Halil (2018) Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology. The International Journal of Advanced Manufacturing Technology, 9 (1-4). pp. 985-1001. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M. I. I., Mahamud and M., Ishak and Aiman, Mohd Halil (2017) Study of Dissimilar Welding AA6061 Aluminium Alloy and AZ31B Magnesium Alloy with ER5356 Filler Using Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-8., 238 (1). ISSN 17578981 (Published)

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. A. H. P., Zaini and Mohd Mawardi, Saari and Nurul A’in, Nadzri and Aiman, Mohd Halil and A. J. S., Hanifah and Tsukada, Keiji Evaluation of back-side slits with sub-millimeter resolution using a differential AMR probe. In: Lecture Notes in Electrical Engineering; 11th National Technical Symposium on Unmanned System Technology, NUSYS 2019 , 2 - 3 December 2019 , Kuantan, Malaysia. 319 -328., 666. ISSN 1876-1100 ISBN 978-981155280-9 (Published)

N

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and M., Ishak and Tsukada, Keiji (2021) Anisotropy magnetoresistance differential probe for characterization of sub-millimeter surface defects on galvanized steel plate. Measurement and Control, 2021. pp. 1-13. ISSN 0020-2940. (Published)

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab Aziz and Nur Huda, Ramlan and Aiman, Mohd Halil (2020) Development of ect probe for back side crack evaluation. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 5-9. (9232475). ISBN 978-172815313-1 (Published)

Nurul A’in, Nadzri and M., Ishak and Mohd Mawardi, Saari and Aiman, Mohd Halil (2018) Development of eddy current testing system for welding inspection. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 94-98.. ISBN 978-1-5386-6321-9 (Published)

Q

Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)

S

Syakila, A. R. and Jamaludin, M. N. and Quazi, M. M. and Aiman, Mohd Halil and Arslan, A. (2024) Effect of laser parameters on colour marking of Ti6Al4V titanium alloy. In: Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12 - 13 September 2023 , Kuantan. pp. 1-11., 2688 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Mohd Mustafa, Al Bakri Abdullah and Aiman, Mohd Halil and Amira Qistina Syamimi, Zaifuddin and Mahadzir, Ishak and Sandu, Andrei Victor and Baltatu, Mădălina Simona and Vizureanu, Petrica (2023) Effectiveness of dimple microtextured copper substrate on performance of Sn-0.7Cu solder alloy. Materials, 16 (96). pp. 1-14. ISSN 1996-1944. (Published)

Sugumaran, Luvindran and Mohd Nashrul, Mohd Zubir and Newaz, Kazi Md Salim and Tuan, Zaharinie and Suazlan, Mt Aznam and Aiman, Mohd Halil (2023) Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures. In: IOP Conference Series: Earth and Environmental Science. 6th International Conference on Clean Energy and Technology 2023, CEAT 2023 , 7 - 8 June 2023 , Hybrid, Penang. pp. 1-7., 1281 (012062). ISSN 1755-1307 (Published)

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak (2023) Mel-frequency cepstral and spectral flux analysis of the acoustic signal for real-time status monitoring of laser cleaning. Materials Research Express, 10 (106506). pp. 1-23. ISSN 2053-1591. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Aiman, Mohd Halil and M., Ishak (2020) Effect of LST parameter on surface morphology of modified copper substrates. Jurnal Tribologi, 26. pp. 84-91. ISSN 2289-7232. (Published)

Siti Rabiatull Aisha, Idris and M., Ishak and Aiman, Mohd Halil (2017) BMM1533 workbook: strength of materials 1. Penerbit UMP, Kuantan, Pahang. ISBN 976-967-2054-56-6

W

W. N. W. M. N., Hissyam and Aiman, Mohd Halil and Kurniawan, Tedi and M., Ishak and Ariga, T. (2017) Effect of copper-based fillers composition on spreading and wetting behaviour. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981 (Published)

Y

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Y. Erny, A. M. Y. and Fadhil, A. R. and Aiman, Mohd Halil and Mahadzir, Ishak and Quazi, M. M. (2021) Comparative study between furnace brazing and laser brazing. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-10., 1068 (012003). ISSN 1757-899X (Published)

Z

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)