Browse by Author All List

Article

Mohd Rhafiq, Mazlan and Nashrah Hani, Jamadon and Mohd Azlan, Aripin and Abu Bakar, Sulong and Aiman, Mohd Halil and M., Ishak and Shamini, Janasekaran (2024) Effect of laser speed on neck formation in SS316L powder joining for LPBF. Journal of Materials Research and Technology, 32. 3382 -3389. ISSN 22387854. (Published)

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak (2023) Mel-frequency cepstral and spectral flux analysis of the acoustic signal for real-time status monitoring of laser cleaning. Materials Research Express, 10 (106506). pp. 1-23. ISSN 2053-1591. (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and M., Ishak and Tsukada, Keiji (2021) Anisotropy magnetoresistance differential probe for characterization of sub-millimeter surface defects on galvanized steel plate. Measurement and Control, 2021. pp. 1-13. ISSN 0020-2940. (Published)

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2021) Acoustic methods in real-time welding process monitoring: Application and future potential advancement. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8490 -8507. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and Quazi, M. M. and Aiman, Mohd Halil and Yamasaki, Kazuhiko (2021) Pulsed ND YAG laser parameter effect on welding uncoated Advanced High Strength Steel (AHSS) for automotive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 91-100. ISSN 2289-7879. (Published)

M. Y., Yuserny and M. H., Aiman and M. M., Quazi and M., Ishak and J., Shamini (2021) Viability of the novel process of indirect laser brazing. Lasers in Engineering, 51 (6). pp. 379-389. ISSN 1029-029X. (Published)

M. M., Quazi and M., Ishak and M. A., Fazal and A., Arslan and Rubaiee, Saeed and M. H., Aiman and Qaban, Abdullah and Farazila, Yusof and T., Sultan and M. M., Ali and S. M., Manladan (2021) A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications. Critical Reviews in Solid State and Materials Sciences, 46 (2). pp. 109-151. ISSN 1040-8436. (Published)

R., Linggamm and M. Nasir, Bashir and Quazi, M. M. and M., Ishak (2021) The influence of nanosecond fibre laser on the removal of paint on metallic surface. International Journal of Technology and Engineering Studies, 7 (2). pp. 1-7. ISSN 2414-3413. (Published)

Elghool, Ali and F., Basrawi and Ibrahim, Thamir K. and Ibrahim, Hassan and M., Ishak and Mohd Hazwan, Yusof and Bagaber, Salem Abdullah (2020) Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection. Energy, 208 (118270). pp. 1-21. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Weld depth estimation during pulse mode laser welding process by the analysis of the acquired sound using feature extraction analysis and artificial neural network. Journal of Manufacturing Processes. pp. 1-16. ISSN 1526-6125. (In Press / Online First) (In Press / Online First)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Classification of weld penetration condition through synchrosqueezed-wavelet analysis of sound signal acquired from pulse mode laser welding process. Journal of Materials Processing Technology, 279 (116559). pp. 1-13. ISSN 0924-0136. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Aiman, Mohd Halil and M., Ishak (2020) Effect of LST parameter on surface morphology of modified copper substrates. Jurnal Tribologi, 26. pp. 84-91. ISSN 2289-7232. (Published)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Ibrahim, Thamir Khalil and M., Ishak and T. M., Yusof and Bagaber, Salem Abdullah (2020) Enhancing the performance of a thermo-electric generator through multi-objective optimisation of heat pipes-heat sink under natural convection. Energy Conversion and Management, 209 (112626). pp. 1-20. ISSN 0196-8904. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and M., Ishak and W. S., Wan Harun and N., Daud (2020) A Review on Electric Wheelchair Innovation to Ease Mobility and As a Rehabilitation Tool for Spinal Cord Impairment Patient. International Journal of Engineering and Technology, 10 (3). pp. 803-815. ISSN 0975-4024. (Published)

Adam, A. Y. and A. N., Oumer and G., Najafi and M., Ishak and F., Basrawi and Aklilu, T. B. (2019) State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers. Journal of Thermal Analysis and Calorimetry. pp. 1-30. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Mohd Mawardi, Saari and Nurul A’in, Nadzri and A. M., Halil and M., Ishak and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2019) Design of eddy current testing probe for surface defect evaluation. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). 6357- 6367. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. J. S., Hanifah and W. N. W. M. N., Hissyam and Aiman, M. H. and M., Ishak and T., Ariga (2019) Effect of copper based filler composition on the strength of brazed joint. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5090-5103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nur Zalikha, Khalil and Mohamed Feisal, Johanne and M., Ishak (2019) Influence of Al2O3 nanoreinforcement on the adhesion and thermomechanical properties for epoxy adhesive. Composites Part B: Engineering, 172. pp. 9-15. ISSN 1359-8368. (Published)

M. N. M., Salleh and M., Ishak and M. H., Aiman and M. M., Quazi and A. M., Hanafi (2019) Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7364-7374. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2018) Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys. The International Journal of Advanced Manufacturing Technology, 98 (9-12). pp. 2747-2758. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and M. Nasir, Bashir and Imran, Ali (2018) Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy. Journal of Adhesion Science and Technology, 32 (6). pp. 625-641. ISSN 0169-4243. (Published)

Khairul Ihsan, Yaakob and M., Ishak and M. H., Aiman and Siti Rabiatull Aisha, Idris (2018) Characterization of Heat-Treated Gas Metal Arc-Welded Boron Steel Sheets. The International Journal of Advanced Manufacturing Technology, 94 (1-4). pp. 827-834. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and Fazal, M. A. and Sazzad, B. S. and Bashir, M. Nasir and Jamshaid, M. (2018) Mechanical and tribological performance of a hybrid MMC coating deposited on Al–17Si piston alloy by laser composite surfacing technique. RSC Advances, 8 (13). pp. 6858-6869. ISSN 2046-2069. (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi and Aiman, Mohd Halil (2018) Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology. The International Journal of Advanced Manufacturing Technology, 9 (1-4). pp. 985-1001. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M., Ishak and K. I., Yaakob and M. M., Quazi and M. N. M., Salleh (2018) Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology. Measurement, 135. pp. 452-466. ISSN 0263-2241. (Published)

Juliawati, Alias and Nurul Shuhada, Mohamed and M., Ishak and Zhou, Xiorong and Thompson, George E. (2018) The influence of hot forming on the microstructure and corrosion behaviour of AZ31B magnesium alloys. Indonesian Journal of Science & Technology, 3 (2). pp. 150-157. ISSN 2527-8045. (Published)

Abdulhadi, Hassan Abdulrssoul and S. N., Aqida and Izwan, Ismail and M., Ishak and Mohammed, Ghusoon R. (2017) Thermally-Induced Crack Evaluation in H13 Tool Steel. Metals, 7 (11). pp. 475-485. ISSN 2075-4701. (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2017) The effect of pulse welding parameters on weld geometry of boron steel using low power fibre laser. Journal of Mechanical Engineering and Sciences (JMES), 11 (3). pp. 2895-2905. ISSN 2289-4659 (Print); 2231-8380 (Online). (Published)

Abdulhadi, Hassan A. and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2017) Fatigue Mechanical Behavior of (PMMA) Poly(methacrylate) Under Shot Peening Treatment. Journal of Computational and Theoretical Nanoscience, 14 (6). pp. 2927-2930. ISSN 1546-1955 (Print); ISSN 1546-1963 (Online). (Published)

Siti Rabiatull Aisha, Idris and Nadhrah, Murad and M., Ishak (2017) Effects of Cooling Rates on Microstructure, Wettability and Strength of Sn3.8Ag0.7Cu Solder Alloy. Procedia Engineering, 184. pp. 266-273. ISSN 1877-7058. (Published)

Mohammed, M. Hasan and M., Ishak and M. R. M., Rejab (2017) Effect of Backing Material and Clamping System on the Tensile Strength Of Dissimilar AA7075-AA2024 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 3991-4007. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2017) Effects of Heat Input on Microstructure, Corrosion and Mechanical Characteristics of Welded Austenitic and Duplex Stainless Steels: A Review. Metals, 7 (2). pp. 1-18. ISSN 2075-4701. (Published)

Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Abdulhadi, Hassan Abdulrssoul (2017) Fiber Laser Welding of Dissimilar 2205/304 Stainless Steel Plates. Metals, 7 (12). pp. 1-19. ISSN 2075-4701. (Published)

A. Y., Adam and A. N., Oumer and Azri, Alias and M., Ishak and M. M., Noor (2017) Investigation of Thermal-Hydraulic Performance in Flat Tube Heat Exchangers at Various Tube Inclination Angles. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4542-4560. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Muhammad Naqiuddin, Mat Salleh and Siti Rabiatull Aisha, Idris (2017) The Mechanical and Microstructural Study of Welded AA7075 Using Different Filler Metals. International Journal of Computational Methods and Experimental Measurements, 5 (5). 696 -712. ISSN 2046-0546 (print); 2046-0554 (online). (Published)

Islam, M. R. and M., Ishak and Luqman Hakim, Ahmad Shah and Siti Rabiatull Aisha, Idris and Meric, C. (2016) Dissimilar Welding Of A7075-T651 and AZ31B Alloys by Gas Metal Arc Plug Welding Method. The International Journal of Advanced Manufacturing Technology, 88 (9). pp. 2773-2783. ISSN 0268-3768(Print); 1433-3015(Online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Fadhlan, Mohd Yusof and M. A., Kamaruzaman and M., Zubair and M., Ishak (2016) Detection Of Defects On Weld Bead Through The Wavelet Analysis Of The Acquired Arc Sound Signal. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2031-2042. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Effect of Immersion Coating Deposition Time on Solder Joint Properties. Advanced Materials Research, 1133. pp. 361-365. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Nurul Hidayah, Othman and Norsyahfiana, Abdul Razak and L. H., Shah and M., Ishak (2016) Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding. Key Engineering Materials, 701. pp. 154-158. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nurul Hidayah, Othman and N., Udin and M., Ishak and L. H., Shah (2016) Effect of Taper Pin Ratio on Microstructure and Mechanical Property of Friction Stir Welded AZ31 Magnesium Alloy. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 586-589. ISSN 1307-6892. (Published)

Mohammed M., Hassan and M., Ishak and M. R. M., Rejab (2016) Influence of Machine Variables and Tool Profile on the Tensile Strength of Dissimilar AA7075-AA6061 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish. Key Engineering Materials, 701. pp. 127-131. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Intermetallic Growth and Shear Strength of SAC305/EN-Boron. Soldering & Surface Mount Technology, 28 (3). pp. 141-148. ISSN 0954-0911. (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and Muhammad Aizat, Kamaruzaman and M., Ishak and M. F., Ghazali (2016) Porosity Detection by Analyzing arc Sound Signal Acquired During the Welding Process of Gas Pipeline Steel. The International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Nur Fakhriah, Mohd Noordin and M., Ishak and L. H., Shah (2016) Prediction and Optimization of Process Parameters on Metal Inert Gas of Dissimilar Aluminium Alloy AA6061-T6 and AA7075-T6 using Response Surface Method Analysis. Key Engineering Materials, 701. pp. 143-147. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608. (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER4043 and ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow. Procedia Engineering, 105. pp. 46-55. ISSN 1877-7058. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG). Jurnal Teknologi (Sciences and Engineering), 75 (7). pp. 79-84. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Yasin Mustafa, Ahmed and Khairul Saleh, Mohamed Sahari and Basim A., Khidhir and M., Ishak (2015) Optimization of Multi-layer Welding of Titanium Alloy. Research Journal of Applied Sciences, Engineering and Technology, 10 (9). pp. 1029-1034. ISSN 2040-7459 (Print); 2040-7467 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2015) An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger. Renewable and Sustainable Energy Reviews, 43. pp. 363-380. ISSN 1364-0321. (Published)

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Al-Dabbagh, Jinan B. and Rozman, Mohd Tahar and M., Ishak and Siti Aisyah, Harun (2015) Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment. International Journal Nanoelectronics and Materials, 8. pp. 23-32. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040. (Published)

M., Ishak and Amir, Aziz and Asnul Hadi, Ahmad (2014) Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (1). pp. 289-295. ISSN 1974-9821. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An experimental study of air flow and heat transfer over in-line flat tube bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2014) An Experimental Study of Air Flow and Heat Transfer Over In-Line Flat Tube Bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and L. H., Shah and I. S. R., Aisha and W., Hafizi and M. R., Islam (2014) Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 793-806. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Tahseen , T.A. and M., Ishak and M. M., Rahman (2014) Performance predictions of laminar heat transfer and pressure drop in an in-line flat tube bundle using an adaptive neuro-fuzzy inference system (ANFIS) model. International Communications in Heat and Mass Transfer, 50. pp. 85-97. ISSN 0735-1933. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali and M. R., Islam (2014) Analysis of an Air Borne Acoustic Signatures from Welding Process Using Empirical Mode Decomposition. Advanced Materials Research, 889 (890). pp. 770-775. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An Experimental Study of Heat Transfer and Friction Factor Characteristics of Finned Flat Tube Banks with In-Line Tubes Configurations. Applied Mechanics and Materials, 564. pp. 197-203. ISSN 1662-7482. (Published)

M., Ishak and M. Rafiqul, Islam and Toshiyuki, Sawa (2014) GMA Spot Welding of A7075-T651/AZ31B Dissimilar Alloys using Stainless Steel Filler. Materials and Manufacturing Processes, 29 (8). pp. 980-987. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

M. I., Rafiquel and M., Ishak (2014) Modelling and Optimizing of Joint’s Fracture Toughness between A7075-T651 and AZ31B Dissimilar Alloys Welded by GMA Spot Welding Method. Applied Mechanics and Materials, 663. pp. 281-286. ISSN 1662-7482. (Published)

M., Ishak and Thet, Thet Mon and Noriah, Bidin and Yap, Tze Chuen (2014) On Generation of Micro-Feature on Silicon with an Industrial Laser. Materials Science Forum, 773 - . pp. 661-669. ISSN 0255-5476. (Published)

M., Ishak and L. H., Shah (2014) Review of Research Progress on Aluminum-Steel Dissimilar Welding. Materials and Manufacturing Processes. pp. 1-24. ISSN 1042-6914 (print); 1532-2475 (online). (Published)

M., Ishak and M. Rafiqul, Islam (2014) Weldability of A7075-T651 and AZ31B Dissimilar Alloys by MIG Welding Method Based on Welding Appearances. Journal of Physics: Conference series, 495. pp. 1-8. ISSN 1742-6588 (print); 1742-6596 (online). (Published)

L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Al-Dabbagh, Jinan B. and M., Ishak and Rozman, Mohd Tahar and Siti Aisyah, Harun (2013) Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA). International Journal of Engineering Research & Technology (IJERT), 2 (8). pp. 2113-2119. ISSN 2278-0181. (Published)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454. (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Maekawa, Katsuhiro and Yamasaki, Kazuhiko (2012) The Characteristics of Laser Welded Magnesium Alloy Using Silver Nanoparticles as Insert Material. Materials Science and Engineering: A, 536 (February 2012). pp. 143-151. ISSN 0921-5093. (Published)

M., Ishak and Takagi, H. (2012) The Characteristics of Unidirectional Solidified Ni-Al-Mo Alloys = Charakterisierung von unidirektional erstarrten Ni-Al-Mo Legierungen. Materialwissenschaft und Werkstofftechnik = Materials Science and Engineering Technology, 43 (5). pp. 416-420. ISSN 0933-5137. (Published)

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online). (Published)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2010) Microstructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles. World Academy of Science, Engineering and Technology, 45 (2010). pp. 420-435. ISSN 2010-376x (print), 2010-3778 (online). (Published)

Book

Siti Rabiatull Aisha, Idris and M., Ishak and Aiman, Mohd Halil (2017) BMM1533 workbook: strength of materials 1. Penerbit UMP, Kuantan, Pahang. ISBN 976-967-2054-56-6

Siti Rabiatull Aisha, Idris and M., Ishak and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611: manufacturing processes laboratory. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-0691-97-8

M., Ishak and Siti Rabiatull Aisha, Idris and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611 Manufacturing Processes Laboratory. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-97-8

Book Chapter

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2018) The effect of argon shielding gas flow rate on welded 22MNBS boron steel using low power fiber laser. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Cham, pp. 39-48. ISBN 978-981-10-9040-0

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris and M., Ishak (2018) A review on mechanical properties of SnAgCu/Cu joint using laser soldering. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 97-107. ISBN 9978-981-10-9040-0

Siti Rabiatull Aisha, Idris and M., Ishak and Luqman Hakim, Ahmad Shah (2017) The Effect of ER4043 and ER5356 Filler Metal on Welded Al 7075 by Metal Inert Gas Welding. In: High Performance and Optimum Design of Structures and Materials II. WIT Transactions on The Built Environment, UK, pp. 213-224. ISBN 978-1-78466-143-4

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2013) Characteristics of Welded Thin Sheet AZ31 Magnesium Alloy. In: Experimental and Numerical Investigation of Advanced Materials and Structures. Advanced Structured Materials, 41 . Springer International Publishing, pp. 147-160. ISBN 978-3-319-00505-8 (print), 978-3-319-00506-5 (online)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

Conference or Workshop Item

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and M., Ishak (2024) Monitoring laser weld penetration status from the optical signal. In: Journal of Physics: Conference Series; 7th International Conference on Mechanical Engineering Research 2023, ICMER 2023 , 12 - 13 September 2023 , Kuantan. pp. 1-10., 2688 (012014). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. N., Salleh and M. F., Ghazali (2023) Defect identification during pulse mode laser welding process through the pattern recognition analysis of the acquired sound frequency spectrum. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 793-802.. ISSN 2195-4356 ISBN 978-981-19-1456-0 (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi (2023) A brief overview on the utilization of high strength steel (HSS) for automotive structural welding applications. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 279 -288.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

N., Affaf and H.S., Wong and M. H., Aiman and M., Ishak and M. M., Quazi (2022) The Effect of Laser Power and Laser Scan Passes on Bending Angle of Stainless Steel AISI 304 Laser Bending. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 899-907.. ISBN 978-981-19-1457-7 (Published)

Mohd Harizan, Zul and M., Ishak and Aiman, Mohd Halil and Quazi, M. M. (2022) Fabrication of Superhydrophobic on Ti6Al4V by Using the Hybrid Process of Nanosecond Laser Texturing. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 341-350.. ISSN 2195-4356 ISBN 978-981-19-4424-6 (Published)

Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)

M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981 (Published)

N. A., Nadzri and M. M., Saari and M. A. H. P., Zaini and A. M., Halil and A. J. S., Hanifah and M., Ishak (2020) Depth Evaluation of Slits on Galvanized Steel Plate Using A Low Frequency Eddy Current Probe. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29 July 2019 , Kuantan, Pahang, Malaysia. pp. 59-66., 632. ISBN 978-981-15-2317-5 (Published)

Mohd Aufa Hadi Putera, Zaini and Mohd Mawardi, Saari and Nurul A'in, Nadzri and Aiman, Mohd Halil and Ahmad Jamil Sulaiman, Hanifah and M., Ishak (2020) Effect of excitation frequency on magnetic response induced by front- and back-side slits measured by a differential AMR sensor probe. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29 July 2019 , Kuantan, Pahang, Malaysia. pp. 15-24., 632. ISBN 978-981-15-2316-8 (Published)

A. Q., Zaifuddin and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Effect of laser surface modification (LSM) on laser energy absorption for laser brazing. In: OP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019) , 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 788 (012013). ISSN 1757-899X (Published)

A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X (Published)

M., Ishak and Norazlianie, Sazali and M. F., Ghazali (2020) A short review on different metal alloys on rapid cooling process. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress (ESChE) 2019 , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 736 (052034). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

H., Tarizan and M., Ishak and Quazi, M. M. and Qaban, A. (2019) Friction stir welding of AZ31B magnesium alloy with ER4043 aluminium alloy filler. In: Proceedings of ARSSS International Conference , 18th November, 2019 , Oxford, United Kingdom. pp. 1-3.. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and M. H., Aiman and Q., Zaifuddin (2019) The effect of laser surface hardening on surface hardness of mild steel. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)

Siti Rabiatull Aisha, Idris and Nabila, T. J. and M., Ishak (2018) Effect of different parameters of fibre laser soldering on interfacial reaction and wetting angle of two types of lead-free SAC305 solder fabrication on cu pad. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. p. 1., 469 (012117). (Published)

M., Ishak and M. N. M., Salleh and Aiman, Mohd Halil and A. M., Hanafi (2018) Investigation on the weld geometry of fiber laser dissimilar welded of boron steel for TWB application. In: Joining and Welding Symposium 2018 (JWS 2018) , 23 October 2018 , Library, UMP Pekan. pp. 1-10.. (Unpublished) (Unpublished)

M., Ishak and M. N. M., Salleh (2018) Double fillet lap of laser welding of thin sheet AZ31B Mg alloy. In: International Laser Technology and Optics Symposium (ILATOS 2017) , 26-28 September 2017 , Pulai Spring Resort, Johor Bahru. pp. 1-6., 1027 (1). ISSN 17426588 (Published)

Nurul A’in, Nadzri and M., Ishak and Mohd Mawardi, Saari and Aiman, Mohd Halil (2018) Development of eddy current testing system for welding inspection. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 94-98.. ISBN 978-1-5386-6321-9 (Published)

P., Moorthy and A. N., Oumer and M., Ishak (2018) Experimental investigation on effect of fin shape on the thermal-hydraulic performance of compact fin-and- tube heat exchangers. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (1). ISSN 1757-899X (online) (Published)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Thamir K., Ibrahim and Shaharin, A. Sulaiman and M., Ishak (2018) Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (04009). ISSN 2261-236X (Published)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X (Published)

Hasan, M.M. and M., Ishak and M. R. M., Rejab (2017) Effect of pin tool design on the material flow of dissimilar AA7075-AA6061 friction stir welds. In: 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1–2 August 2017 , Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia. pp. 1-8., 257 (1). ISSN 17578981 (Published)

Jiang, X. X. and Ji, H. and M. R. M., Rejab and Zhang, S. and M., Ishak and Zhu, L. (2017) Geometrical parameters influence on the stiffness of steel sandwich plates with web-core. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017 , 1-2 Aug. 2017 , Swiss Garden Hotel, Balok, Kuantan, Pahang. pp. 1-10., 257 (1). ISSN 17578981 (Published)

M., Ishak and S. N., Aqida and Mohammed, Ghusoon R. and Abdulhadi, Hassan A. (2017) Weld bead profile of laser welding dissimilar joints stainless steel. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

W. N. W. M. N., Hissyam and Aiman, Mohd Halil and Kurniawan, Tedi and M., Ishak and Ariga, T. (2017) Effect of copper-based fillers composition on spreading and wetting behaviour. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981 (Published)

N. H., Othman and M., Ishak and L. H., Shah (2017) Effect of shoulder to pin ratio on magnesium alloy Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-9., 238 (1). ISSN 17578981 (Published)

M. I. I., Mahamud and M., Ishak and Aiman, Mohd Halil (2017) Study of Dissimilar Welding AA6061 Aluminium Alloy and AZ31B Magnesium Alloy with ER5356 Filler Using Friction Stir Welding. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-8., 238 (1). ISSN 17578981 (Published)

Mohamad Heerwan, Peeie and S. M., Ashraf and M., Ishak (2017) Combination of Skid Control and Direct Yaw Moment Control to Improve The Safety And Stability of The Small Electric Vehicle With Two In-Wheel Motors. In: 8th International Conference In Mechanical And Manufacturing Engineering (ICME2017) , 22-23 July 2017 , Bella Vista Waterfront, Langkawi, Kedah, Malaysia. pp. 1-12., 135. ISSN 2261236X (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay (2017) Effect of Fiber Laser Parameters on Laser Welded AZ31B Magnesium Alloys. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12., 90 (01032). ISSN 2261-236X (Published)

M. F. M., Yusof and M., Ishak and M. F., Ghazali (2017) Feasibility of using acoustic method in monitoring the penetration status during the Pulse Mode Laser Welding process. In: IOP Conference Series: Materials Science and Engineering: Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 238 (012006). ISSN 1757-899X (Published)

Siti Norazila, Zahari and M. S. M., Sani and M., Ishak (2017) Finite Element Modelling and Updating of Friction Stir Welding (FSW) Joint for Vibration Analysis. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01021). ISSN 2261-236X (Published)

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris and Aiman, Mohd Halil and Nur Zalikha, Khalil (2017) Hardness Variation of Welded Boron Steel Using Continuous Wave (CW) and Pulse Wave (PW) Mode of Fiber Laser. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-5., 238 (012007). ISSN 1757-899X (Published)

S. A., Che Ghani and Mohd Nasri, Muda and Mueller, Timo Michael and W. S., Wan Harun and Saiful Nizam, Tajuddin and M., Ishak and Anwaruddin, Hisyam (2017) Improvement of Agarwood Oil Extraction by Heat Transfer Control in Multiple Hydrodistillation Systems. In: Proceedings of 4th National Conference on Knowledge Transfer (NCKT'17) , 4-5 December 2017 , Knowledge Transfer Centre, Universiti Sains Malaysia. pp. 1-5.. ISBN 978-967-394-X-X. (Published)

Mohd Rushdi, Mohamad and L. H., Shah and M., Ishak (2017) Investigation of Preheating Method on Joint Strength of Aluminium-Stainless Steel Dissimilar Welding Using Metal Inert Gas (MIG) Process. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-9., 238. ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Mohammad Naqiuddin, Mohamad Salleh and M., Ishak and Aiman, Mohd Halil and Siti Rabiatull Aisha, Idris and F. R. M., Romlay (2017) Investigation on the effect of pulsed energy on strength of fillet lap laser welded AZ31B magnesium alloys. In: IOP Conference Series: Materials Science and Engineering, Joining and Welding Symposium , 11 July 2017 , Universiti Malaysia Pahang, Malaysia. pp. 1-7., 238 (012009). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Afidatusshimah, Mazlan and Hamdan, Daniyal and Amir Izzani, Mohamed and M., Ishak and Amran, Abdul Hadi (2017) Monitoring the Quality of Welding based on Welding Current and Ste Analysis. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-5., 257 (012043). ISSN 1757-899X (Published)

T. J., Nabila and Siti Rabiatull Aisha, Idris and M., Ishak (2017) Optimization On Laser Soldering Parameters Onto Lead-Free Solder Joint. In: Joining and Welding Symposium (JWS2017) , 11 July 2017 , Universiti Malaysia Pahang. pp. 1-6., 238 (1). ISSN 17578981 (Published)

Nickolas, N. and Moorthy, P. and A. N., Oumer and M., Ishak (2017) A Review on Improving Thermal-Hydraulic Performance of Finand- Tube Heat Exchangers. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012049). ISSN 1757-899X (Published)

Siti Rabiatull Aisha, Idris and Nadhrah, Murad and M., Ishak (2016) Effects of Sintering Temperatures on Microstructures and Mechanical Properties of Sn4.0Ag0.5Cu1.0Ni Solder Alloy. In: 2016 IEEE 37th International Electronics Manufacturing Technology (IEMT) & 18th Electronics Materials and Packaging (EMAP) Conference , 20-22 September 2016 , Penang, Malaysia. pp. 1-7.. (Published)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2016) The Effect of Fiber Laser Parameters on Microhardness and Microstructure of Duplex Stainless Steel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01024). ISSN 2261-236X (Published)

K. I., Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2016) The Effect of Shielding Gas Flow Rate on Fiber Laser Welding of Boron Steel. In: 3rd TMAC Symposium 2016 , 28 Feb - 1 March 2016 , UTEM Melaka. pp. 1-5.. (Unpublished) (Unpublished)

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590.. (Published)

K. M., Ahmad and Mohd Rashidi, Maarof and M., Ishak and M. S., Huzairi (2016) Microstructure and Mechanical Properties of Austenitic Compacted Cast Iron with Additive Manganese. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00009). ISSN 2261-236X (Published)

Hassan, A. Abdulhadi and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2016) Thermal Fatigue of Die-Casting Dies: An Overview. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00032). ISSN 2261-236X (Published)

M., Ishak and A. S. K., Razali and N. F. M., Noordin and L. H. A., Shah and F. R. M., Romlay (2015) The Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas (TIG). In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. , 11 (1). ISSN 22298649 (Published)

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Hardness Effect of Friction Stir Welding by MILKO 37 Milling Machine. In: AIP Conference Proceeding 1660, 070096 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28–30 May 2014 , Penang, Malaysia. pp. 1-6.. (Published)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished) (Unpublished)

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding. In: AIP Conference Proceeding 1660 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 1-9.. (Published)

M., Ishak and M. N. M., Salleh and F. R. M., Romlay (2015) A Study on Bead on Plate Welding of AA7075 By Low Power Fiber Laser. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Effect of Nickel addition on Intermetallic Compound Properties of Sn-Cu Solder Alloy. In: International Conference on Electronics Packaging , 23-25 April 2014 , Jepun. . (Published)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Microstructure Evolution at the Solder Joint During Isothermal Aging. In: IEEE 36th International (IEMT) Electronics Manufacturing Technology Conference (IEMT 2014) , 11-13 November 2014 , Johor Bahru. pp. 1-5.. ISBN 978-1-4799-8209-7 (Published)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished) (Unpublished)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) Estimation of Heat Transfer and Pressure Drop in an In-Line Flat Tubes Bundle by Radial Basis Function Network (RBFN). In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-8.. (Published)

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. . (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2011) A Numerical Study of Forced Convection Heat Transfer for Staggered Tube Banks in Cross-Flow. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 216-227.. (Published)

Mohd Yusof, Taib and S. F., Ismail and M., Ishak (2011) Sustainable Analysis of Lightweight Lift System Design for Disable People Using Finite Element. In: International Conference on Robotics Automation System (ICORAS 2011) , 23-24 May 2011 , ITC, Kemaman Terengganu. . (Unpublished) (Unpublished)

M. F. F., Ab Rashid and Wan Mansor, Wan Muhamad and M., Ishak and Mohd Zaidi, Sidek (2005) Design and Simulation Of Robotic Spot Welding System for Automotive Manufacturing Application. In: Proceedings of the 35th International Conference on Computers and Industrial Engineering , 19-22 June 2005 , Istanbul Turkey. pp. 1409-1414.. (Published)

Al-Dabbagh, Jinan B. and Razman, Mat Tahar and M., Ishak and Siti Aisyah, Harun Synthesis and Characterization of Nano Ti-50%AI by Mechanical Alloying. In: 7th International Conference on Advanced Computational Engineering and Experimentaly (ACE-X 2013) , 1-4 July 2013 , Madrid, Spain. pp. 1-6.. (Unpublished) (Unpublished)