Items where Division is "Faculty of Mechanical and Automotive Engineering Technology" and Year is 2020
 | Up a level |
A
A. J. S., Hanifah and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Enhancement of mechanical properties of Copper Brazed by laser surface modification. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012012). ISSN 1757-899X (Published)
A. Q., Zaifuddin and Aiman, Mohd Halil and M., Ishak and T., Ariga (2020) Effect of laser surface modification (LSM) on laser energy absorption for laser brazing. In: OP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019) , 30-31 Julai 2019 , Vistana Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 788 (012013). ISSN 1757-899X (Published)
Ab Rahim, M. F. and Jaafar, A. A. and Taha, Z. and Rizalman, Mamat (2020) Simulation study on the effect of fuel injection and air intake boundary setup on the brake torque response by using comprehensive vehicle model for natural gas vehicle (NGV). In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-10., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Abbas, Abdul Wahab and Mohd Azri Hizami, Rasid (2020) Characterization of brushed DC motor with brush fault using thermal assessment. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-10., 788 (012095). ISSN 1757-8981 (Published)
Abdullah, N. A. Z. and Brapakaran, P. and M. S. M., Sani and Marcel, M. W. and Agung, E. H. (2020) Investigation on the dynamic properties of propeller structure with different number of blades. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology , 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-11., 807 (012035). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Abdullah, Z. and Mohamad Heerwan, Piee and I M, Izhar and M A, Zakaria (2020) Study the influence of distance in Artificial Potential Field (APF) for Autonomous Emergency Braking System (AEB) on longitudinal motion. IOP Conf. Series: Materials Science and Engineering, 1068 (012015). pp. 1-10. ISSN 1757-8981 (Print) 1757-899X (Online). (Published)
Abdulwahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz and R., Mamat and Cheng, C. K. and Vo, Dai-Viet N. (2020) Kinetic and CFD Modeling of Exhaust Gas Reforming of Natural Gas in a Catalytic Fixed‐Bed Reactor for Spark Ignition Engines. Chemical Engineering and Technology, 43 (4). pp. 705-718. ISSN 1521-4125. (Published)
Abdulwahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and R., Mamat and Abd Rashid, Abd Aziz and Cheng, C. K. (2020) Syngas production through steam and CO2 reforming of methane over Ni-based catalyst-A Review. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-18., 736 (042032). ISSN 1757-899X (Published)
Ahmad Fadzil, Sharol and Amir, Abdul Razak and Zafri Azran, Abdul Majid and Muhammad Amirul Azwan, Azmi and Muhammad Amir Syahiran, Muhammad Tarminzi (2020) Evaluation on the Performance of Cross-Matrix Absorber Double-Pass Solar Air Heater (CMA-DPSAH) with and without Thermal Energy Storage Material. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 37-49. ISSN 2289-7879. (Published)
Ahmad Fahmy, Jusoh (2020) Characterisation of kenaf fibre composite trapezoid sandwich structure based on corrugated core. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mat Rejab, Moho Ruzaimi).
Ahmad Shahir, Jamaludin and Norazlianie, Sazali and Nor Hasrul Akhmal, Ngadiman (2020) An essential studies on tribology’s: a short review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 1-18. ISSN 2289-7879. (Published)
Aljaerani, Hatem Ahmad and M., Samykano and Pandey, A. K. and K., Kadirgama and Saidur, R. (2020) Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: a critical review. Journal of Molecular Liquids, 314 (113807). pp. 1-20. ISSN 0167-7322. (Published)
Amirul, Zainal and Mohd Hafizu, Zakaria and Saiful Anwar, Che Ghani (2020) Investigation on machining performance of TiB2 and TiN coatings with modified cutting insert in AISI 1017 turning. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Anand, M. and Deepanraj, B. and Ranjitha, J. and M. M., Noor (2020) Biodiesel production from mixed elengi and pongamia oil using calcined waste animal bone as a novel heterogeneous catalyst. In: International Conference on Technological Advancements in Materials, Design, Manufacturing and Energy Sectors (ICTAMDMES'20) , 20-21 February 2020 , Chennai, India. pp. 1-7., 923. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Anthony, Bokolo Jnr. and Adzhar, Kamaludin and Awanis, Romli and Anis Farihan, Mat Raffei and Eh Phon, Danakorn Nincarean and Aziman, Abdullah and Gan, Leong Ming (2020) Blended learning adoption and implementation in higher education: A theoretical and systematic review. Technology, Knowledge and Learning. pp. 1-48. ISSN 2211-1662. (In Press / Online First) (In Press / Online First)
Ashwindran, S. N. and Azizuddin, Abd Aziz and A. N., Oumer (2020) A moment coefficient computational study of parametric drag-driven wind turbine at moderate tip speed ratios. Australian Journal of Mechanical Engineering. pp. 1-15. ISSN 1448-4846. (Published)
Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Azli, Abd Razak (2020) An introductory CFD analysis study of novel cavity vane driven wind turbine blade design. Journal of Mechanical Engineering, 17 (3). pp. 55-68. ISSN 1823-5514. (Published)
B
Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)
Benedict Foo, Jing Siong (2020) Hybrid-inspired coolant additive for radiator application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
C
Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2020) Ambient suppression in vibration bump test using wavelet-based filter. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012087). ISSN 1757-8981 (Published)
Chen, J. L. T. and Oumer, A. N. and Azizuddin, Abd Aziz (2020) Stability and density analysis of mango bark and mango leaf nanofluids. In: IOP Conference Series: Materials Science and Engineering; Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863 (012061). ISSN 1757-899X (Published)
D
Daing Mohamad Nafiz, Daing Idris and Esqander, Johannes and Ruhil Amal, Azmuddin (2020) Gelam conservation, prospects and silviculture management. In: Proceeding - 9th Kuala Lumpur International Agriculture, Forestry and Plantation Conference (KLIAFP9), , 21-22 September 2020 , Bangi Resort Hotel, Bangi, Malaysia. pp. 240-254.. ISSN 2682-8758 (Published)
Daud, R. and M. Z. H., Jantan and Mas Ayu, Hassan and A., Shah (2020) Investigation of fatigue failure performance of ankle implant mobile bearing using finite element method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019) , 1-3 December 2019 , Penang, Malaysia. pp. 1-10., 815 (012016). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
E
Elghool, Ali and F., Basrawi and Ibrahim, Thamir K. and Ibrahim, Hassan and M., Ishak and Mohd Hazwan, Yusof and Bagaber, Salem Abdullah (2020) Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection. Energy, 208 (118270). pp. 1-21. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)
Elghool, Ali Elhade (2020) Experimental study and optimization on thermoelectric generator combined with heat pipe-heat sink. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
F
Faizil, Wasbari and R. A., Bakar and Gan, Leong Ming and Mohd Azli, Salim and Mohamad Firdaus, Sukri and Hairol Nizam, Mohd Shah and Safarudin Gazali, Herawan (2020) The effects of multiple energy storage on the capacity and performance of hydro-pneumatic driveline. International Journal Nanoelectronics and Materials, 13 (ISSTE 2019). 233-246]. ISSN 1985-5761 (print); 2232-1535 (online). (Published)
Fatimah, Dzaharudin and Azrina, Md Ralib and Ummu Kulthum, Jamaludin and Mohd Basri, Mat Nor and Afidalina, Tumian and Har, Lim Chiew and Ceng, T. C. (2020) Mortality prediction in critically ill patients using machine learning score. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-12., 788 (012029). ISSN 1757-8981 (Published)
Fatin Nurwahdah, Ahmad and Norazlianie, Sazali and Mohd Hafiz Dzafran, Othman (2020) A Mini Review on Carbon Molecular Sieve Membrane for Oxygen Separation. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 23-35. ISSN 2636-9575. (Published)
Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2020) Effect of tungsten carbide partial dissolution on the microstructure evolution of a laser clad surface. Optics & Laser Technology, 121 (105789). pp. 1-8. ISSN 0030-3992. (Published)
H
H., Ismail and M. Z., Sulaiman and M. A. H., Aizzat (2020) Qualitative investigations on the stability of Al2O3-SiO2 hybrid water-based nanofluids. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-8., 788 (012091). ISSN 1757-8981 (Published)
H., Ismail and Muhamad Zuhairi, Sulaiman and M. A. H., Aizzat (2020) Qualitative investigations on the stability of Al2 O3 -SiO2 hybrid waterbased nanofluids. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-7., 788 (012091). ISSN 1757-899X (Published)
H. A., Haziq A. and M. R. M., Akramin and M. N. M., Husnain and M. S., Shaari (2020) Modelling of crack propagation for embedded crack structure. In: Proceedings of International Conference of Aerospace and Mechanical Engineering 2019 , 20-21 November 2019 , Universiti Sains Malaysia, Malaysia. pp. 11-19.. ISBN 978-981-15-4756-0 (Published)
Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2020) Effect of filler composition on microstructure and mechanical properties of MIG welded AA6061 and AA7075. In: National Conference For Postgraduate Research 2020 (NCON-PGR 2020) , 9 December 2020 , Universiti Malaysia Pahang. pp. 147-160.. (Submitted) (Submitted)
Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Muhammad Nizam, Zainal Abidin (2020) A short review on recent utilization of nanocellulose for wastewater remediation and gas separation. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)
Hou, Wentao and L. H., Shah and Huang, Guoqiang and Shen, Yifu and Gerlich, Adrian (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. Journal of Alloys and Compounds, 825 (154045). pp. 1-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)
I
I. M., Sollehudin and Mohamad Heerwan, Peeie (2020) Speed estimation of the electric-powered wheelchair by proposing the state observer method based on experimental data. SN Applied Sciences, 2 (2). pp. 1-8. ISSN 2523-3963 (Print); 2523-3971 (Online). (Published)
Ibrahim, Mohammad Sollehudin and Peeie, M. H. (2020) The dynamic behavior investigation of electric power wheelchair during the obstacle avoidance. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012074). ISSN 1757-8981 (Published)
Imtiaz, Ali Laghari and Mahendran, Samykano and Pandey, A. K. and K., Kadirgama and Tyagi, V. V. (2020) Advancements in PV-thermal systems with and without phase change materials as a sustainable energy solution: energy, exergy and exergoeconomic (3E) analytic approach. Sustainable Energy & Fuels, 4 (10). pp. 4956-4987. ISSN 23984902. (Published)
Inel, F. and M. M., Noor (2020) 3D cable-based parallel robot simulation using PD control. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-12., 788 (012069). ISSN 1757-899X (Published)
Izuan, Izzudin and Ahmad Fitri, Yusop and Syazwana, Sapee and Mohd Adnin, Hamidi and I. M., Yusri and R., Mamat and E., Erdiwansyah (2020) Experimental studies of engine single cylinder run on diesel-biodiesel-butanol blends. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981 (Published)
J
Jihan, Zukhi and Fatanah Mohamad, Suhaimi and Mohd Zulfakar, Mazlan and Ummu Kulthum, Jamaludin and Normy, Razak and Mastura, Mohd Sopian (2020) The effects of insulin infusion protocol on the glycemic level of the intensive care patients. In: IFAC-PapersOnLine; 21st IFAC World Congress 2020 , 12-17 July 2020 , Berlin. pp. 15964-15969., 53 (2). ISSN 2405-8963 (Published)
Juan, Pratama and Deni Fajar, Fitriyana and Rusiyanto, . and Siregar, J. P. and Wahyu, Caesarendra (2020) A low cost validation method of finite element analysis on a thin walled vertical pressure vessels. In: Journal of Physics: Conference Series; 8th Engineering International Conference 2019 , 16 August 2019 , Semarang, Indonesia. pp. 1-18., 1444 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
K
K., Kadirgama (2020) Nanofluid as an Alternative Coolant in Machining: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 163-173. ISSN 2289-7879. (Published)
K. E., Leong and Kar Sing, Lim and Ahmad Syahrizan, Sulaiman and Siew Choo, Chin and N., Yahaya (2020) Effect of defect width upon burst capacity of composite repaired pipe. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012018). ISSN 1757-899X (Published)
Kumaran, Kadirgama and Devarajan, Ramasamy (2020) Nanocoolant alternative for cooling elements by UMP researchers. UMP News .
Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) A Global Outreach by two Malaysians Success Story Unveiled. UMP News .
Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) The trend of 3D Printing in higher TVET skill level. UMP News . (Unpublished)
Kumaran, Kadirgama and Wan Sharuzi, Wan Harun (2020) The trend of 3D printing in higher level TVET skill. UMP News .
L
L. H., Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool offsetting and base metal positioning on the material flow of AA5052-AA6061 dissimilar friction stir welding. Journal of Mechanical Engineering and Sciences (JMES), 14 (1). pp. 6393-6402. ISSN 2231-8380 (online). (Published)
Lance, Clarence and Wan Muhammad Noor Sarbani, Mat Daud (2020) Improving production system performance using overall equipment effectiveness. International Journal of Industrial Management (IJIM), 6 (1). pp. 58-74. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)
Liao, Binbin and Wang, Panding and Zheng, Jinyang and Cao, Xiaofei and Quanjin, Ma and Tao, Ran and Fang, Daining (2020) Effect of double impact positions on the low velocity impact behaviors and damage interference mechanism for composite laminates. Composites Part A: Applied Science and Manufacturing, 136 (105964). pp. 1-11. ISSN 1359-835X. (Published)
Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Radhiana, Hassan (2020) Qualitative and quantitative comparison of hemodynamics between MRI Measurement and CFD Simulation on Patientspecific Cerebral Aneurysm - A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 112-123. ISSN 2289-7879. (Published)
Lim, Sheh Hong and Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2020) Experimental study on the performance of vortex tube cooling device on a cooling jacket. In: IOP Conference Series: Earth and Environmental Science, 10th International Conference on Future Environment and Energy , 7-9 January 2020 , Kyoto, Japan. pp. 1-8., 581 (012018). ISSN 1755-1315 (Published)
Luqman, Abdul Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Siti Norazualina, Faizal (2020) Fluidized bed drying of stingless bee pot-pollen: performance of swirling distributor. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-6., 863. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Luqman, Abdul Halim and Firdaus, Basrawi and Mohd Yusof, Taib and Mohd Hazwan, Yusof and Zulkifli, Mustafa and Thamir K., Ibrahim (2020) A preliminary study on new cooling techniques for stingless bees hive. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-8., 863. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Luqman, Abdul Halim and Firdaus, Basrawi and Siti Norazualina, Faizal and Ahmmad Shukrie, Md Yudin and Mohd Yusof, Taib (2020) Effect of superficial air velocity on the fluidized bed drying performance of stingless bee pot-pollen. In: Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-5., 863. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Luqman Abdul, Halim and Firdaus, Basrawi and Ahmmad Shukrie, Md Yudin and Amir, Abdul Razak and Nor Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat (2020) Drying of stingless bees pot-pollen using swirling fluidized bed dryer. Drying Technology. pp. 1-9. ISSN 0737-3937. (Published)
Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Walbridge, Scott and Gerlich, Adrian (2020) Influence of tool eccentricity on the material flow and microstructural properties of AA6061 aluminum alloy friction stir welds. Journal of Alloys and Compounds, 826 (154219). pp. 1-11. ISSN 0925-8388 (print), 1873-4669 (online). (Published)
M
M. H., Muhammad Sidik and S. A., Che Ghani and R. A. R., Maarof (2020) Validation test on thresholds for wheelchair power-assist system activation using population data. International Journal of Advanced Science and Technology, 29 (8S). pp. 4387-4395. ISSN 2005-4238. (Published)
M. R. M., Akramin and M. N. M., Husnain and Z. L., Chuan and Takahashi, Akiyuki (2020) Fatigue crack growth analysis using Bootstrap S‑version finite element model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (184). pp. 1-21. ISSN 1806-3691. (Published)
M. S. M., Fouzi and M. S. M., Sani (2020) Finite element modeling and updating for dynamic study of exhaust structure. In: 2nd Regional Conference on Mechanical and Marine Engineering, ReMME 2018 , 7 - 9 November 2018 , Ipoh, Malaysia. pp. 305-313.. ISSN 2195-4356 ISBN 9789811500015 (Published)
M.N.M., Salleh and M., Ishak and Aiman, Mohd Halil and Q., Zaifuddin and Quazi, M. M. (2020) The effect of laser surface hardening on the surface hardness of mild steel. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-11., 788 (1). ISSN 1757-8981 (Published)
Ma, Quanjin and Ge, Jia and Rejab, M. R. M. and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2020) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. 1645 -1651., 46. ISSN 2214-7853 (Published)
Ma, Quanjin and Kuai, Tengfei and M. R. M., Rejab and Manoj Kumar, Nallapaneni and M. S., Idris and Abdullah, M. H. (2020) Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). 7348 -7360. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Merzuki, M.N.M. and Shaoliang, Huang (2020) Compressive properties on the spherical-roof contoured-core cell with different amounts of diamond-shaped notches. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012049). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Ma, Quanjin and Salim, M. S. A. and Rejab, M. R. M. and Bernhardi, Otto-Ernst and Nasution, Ahmad Yunus (2020) Quasi-static crushing response of square hybrid carbon/aramid tube for automotive crash box application. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. 683 -690., 27. ISSN 2214-7853 (Published)
Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, Januar Parlaungan and Zalinawati, Mohamad and Quanjin, Ma and Mohammed, A. A. (2020) Mechanical properties of hybrid glass fiber/rice husk reinforced polymer composite. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. pp. 1749-1755., 27 (161490). ISSN 2214-7853 (Published)
Mohamad Firdaus, Basrawi and Anuar, M. N. A. F. and Ibrahim, T. K. and A. A., Razak (2020) Experimental analysis on the effect of cooling surface area and flow rate for water cooled photovoltaic module. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-9., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Mohamad Nazirul Mubin, Merzuki (2020) Investigation on mechanical and modal properties of aluminium based fibre metal laminates. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).
Mohamad Rizdwan, Rashid Chand (2020) Performance of micro gas turbine trigeneration system and photovoltaic hybrid based system in remote area applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohd Akramin, Mohd Romlay and Akiyuki, Takahashi and M.N.M., Husnain and Chuan, Zun Liang (2020) K-S Test for crack increment in probabilistic fracture mechanics analysis. In: 5th International Conference on Civil And Environmental Engineering for Sustainability (ICONCEES 2019) , 19 - 20 November 2019 , Le Grandeur Palm Resort in Senai, Johor. pp. 1-6., 498 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Mohd Akramin, Mohd Romlay and M. S., Marizi and M. N., M. Husnain and M. S., Shaari (2020) Analysis of surface crack using various crack growth models. In: 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS 2019) , 25 - 27 Nov 2019 , Bandung, Indonesia. pp. 1-6., 1529 (4). ISSN 1742-6588 (Published)
Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab. Aziz and Mohd Mawardi, Saari and Aiman, Mohd Halil and Nurul A’in, Nadzri and Ahmad Jamil Sulaiman, Hanifah (2020) Development of an unsaturated differential magnetic probe for the visualization of back-side slits with different directions on carbon steel plate. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 1-4. (9232487). ISBN 978-172815313-1 (Published)
Mohd Azrul Hisham, Mohd Adib and Nurul Aqilah, Herman and Idris, Mat Sahat and Waheb Abdul Jabbar, Shaif Abdullah (2020) Smart robotic rover enhancement in safety monitoring. International Journal of Emerging Trends in Engineering Research, 8 (1.2). pp. 1-5. ISSN 2347-3983. (Published)
Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Classification of weld penetration condition through synchrosqueezed-wavelet analysis of sound signal acquired from pulse mode laser welding process. Journal of Materials Processing Technology, 279 (116559). pp. 1-13. ISSN 0924-0136. (Published)
Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Weld depth estimation during pulse mode laser welding process by the analysis of the acquired sound using feature extraction analysis and artificial neural network. Journal of Manufacturing Processes. pp. 1-16. ISSN 1526-6125. (In Press / Online First) (In Press / Online First)
Mohd Fadhlan, Mohd Yusof and Mahadzir, Ishak and Mohd Fairusham, Ghazali (2020) Detection of irregularities on weld bead from the L-Statistic analysis of the acquired sound during pulse mode laser welding process. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30-31 July 2019 , Kuantan. pp. 1-9., 788 (012015). ISSN 1757-8981 (Published)
Mohd Farid, Zainudin and Rosli, Abu Bakar and Kadirgama, Kumaran and Gan, Leong Ming (2020) Kinematic and thermodynamic operational analysis of rhombic-drive Stirling engine prototype. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012070). ISSN 1757-8981 (Published)
Mohd Hanafi, Muhammad Sidik (2020) Development of a new robust hybrid automata algorithm based on surface electromyography (SEMG) signal for instrumented wheelchair control. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohd Hasnun Ariff, Hassan and Tan, F. Y. and M. A., Abdullah and N. Q., Radzuan and K. A., Abu Kassim (2020) Does a circular convex blind spot mirror increase the driver’s field of view? Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 44-49. ISSN 2550-2239. (Published)
Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah (2020) Multi-objective optimization of diesel engine performances and exhaust emissions characteristics of Hermetia illucens larvae oil-diesel fuel blends using response surface methodology. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-2. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)
Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2020) Flexible valve timing strategies for boosting a small four-stroke spark ignition engine performance. Small Engine Technology Conference & Exposition (SETC2019). pp. 1-8. ISSN 2019-32-0591. (Published)
Mohd Syafiq, Sharip and Norazlianie, Sazali (2020) Tubular carbon membrane for Hydrogen separation: Effect of Pyrolisis condition. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 60-67. ISSN 2636-9575. (Published)
Mohd Syafiq, Sharip and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) Gas Separation Performance through Carbon Membrane: The Effect of Polymer Composition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 177-187. ISSN 2289-7879. (Published)
Mohd Syafiq, Sharip and Norazlianie, Sazali and Fatin Nurwahdah, Ahmad (2020) Effect of polymer concentration on matrimid 5218 based-carbon membrane for H2 separation. Journal of Applied Membrane Science & Technology, 24 (1). 51 -63. ISSN 2600-9226. (Published)
Muhamad, Mat Noor (2020) The Importance of MILD Combustion, Biogas and The Impact on The Global Warming. UMP News .
Muhamad Hadie Aizzat, Asli (2020) Heat transfer performance of single and hybrid water-based nanofluids (Al2O3 and SiO2) in nucleate pool boiling. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Muhamad Husnain, Mohd Noh (2020) Fatigue crack growth analysis using the bootstrap s-version finite element model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Muhammad, Siti Sabariah and Bakar, R. A. (2020) Spark ignition engine performance analysis of liquefied petroleum gas. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012065). ISSN 1757-8981 (Published)
Muhammad Asyraf, Shahrom (2020) Investigation on electric motor braking control system for electric powered wheelchair. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).
Muhammad Hazli, Mazlan and Todo, Mitsugu and Ida Laila, Ahmad and Takano, Hiromitsu and Yonezawa, Ikuho and Abdul Halim, Abdullah and Muhammad Hilmi, Jalil and Nur Dalilah Diyana, Nordin (2020) Biomechanical evaluation of two different types of interbody cages in posterior lumbar interbody fusion. International Journal of Emerging Trends in Engineering Research, 8 (1.2 Special). pp. 221-226. ISSN 2347-3983. (Published)
Muhammad Mufazzal, Mustaffa and Norazlianie, Sazali (2020) A Short Review on Novel Membranes for Gas Separation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 1-11. ISSN 2289-7879. (Published)
N
N. A., Nadzri and M. M., Saari and M. A. H. P., Zaini and A. M., Halil and A. J. S., Hanifah and M., Ishak (2020) Depth Evaluation of Slits on Galvanized Steel Plate Using A Low Frequency Eddy Current Probe. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29 July 2019 , Kuantan, Pahang, Malaysia. pp. 59-66., 632. ISBN 978-981-15-2317-5 (Published)
N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2020) Computational modal analysis on finite element model of body-in-white structure and its correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7915-7926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
N. K., Romli and Xiaoxia, Jiang and S. M., Sofie and M. R. M., Rejab (2020) Three-point bending response of laser-welded sandwich structure with varying number of core and span length. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012011). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
N. M., Ali and Fatimah, Dzaharudin and E. A., Alias (2020) Nonlinear dynamics of a shell encapsulated microbubble near solid boundary in an ultrasonic field. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). pp. 7235-7243. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Naidu Sanderasagran, Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. (2020) A rudimentary computational assessment of low tip speed ratio asymmetrical wind turbine blades. International Journal of Integrated Engineering, 12 (4). pp. 89-103. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)
Najihah, Mohd Ali and Fatimah, Dzaharudin and Erny Afiza, Alias (2020) Effects of varying ultrasound parameters on the oscillation of a microbubble near a boundary. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-8., 788 (1). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Nasrullah, M. and Singh, Lakhveer and Krishnan, Syam G. and Mimi Sakinah, A. M. and Mahapatra, Durga Madhab and Zularisam, A. W. (2020) Electrocoagulation treatment of raw palm oil mill effluent: Effect o foperating parameters on floc growth and structure. Journal of Water Process Engineering, 33 (101114). pp. 1-11. ISSN 2214-7144. (Published)
Nor Hanisah, Husain and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal analysis of 6061 wrought aluminium alloy using cooling curve analysis-computer aided (CCA-CA) method. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-11., 788 (012018). ISSN 1757-8981 (Published)
Norazlianie, Sazali (2020) Emerging technologies by hydrogen: A review. International Journal of Hydrogen Energy, 45 (38). pp. 18753-18771. ISSN 0360-3199. (Published)
Norazlianie, Sazali (2020) Fundamental and Crucial Challenge in Tribology's: A Short Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). pp. 144-153. ISSN 2289-7879. (Published)
Norazlianie, Sazali (2020) A Short Review on Separation of H2/CO2 using Polymer Membrane. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 174-182. ISSN 2289-7879. (Published)
Norazlianie, Sazali (2020) A comprehensive review of carbon molecular sieve membranes for hydrogen production and purification. The International Journal of Advanced Manufacturing Technology. pp. 1-20. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)
Norazlianie, Sazali (2020) A review of the application of carbon-based membranes to hydrogen separation. Journal of Materials Science, 55 (25). pp. 11052-11070. ISSN 0022-2461 (Print); 1573-4803 (Online). (Published)
Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Nor Hasrul Akhmal, Ngadiman (2020) A major review on tribology-based materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (2). pp. 26-37. ISSN 2289-7879. (Published)
Norazlianie, Sazali and M. F., Ghazali and S. A., Che Ghani and Wan Norharyati, Wan Salleh (2020) A Short Review on Developing Membrane Proficiency for Water Energy Sustainability. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 72-80. ISSN 2289-7879. (Published)
Norazlianie, Sazali and Mohamad Azuwa, Mohamed and Wan Norharyati, Wan Salleh (2020) Membranes for hydrogen separation: A significant review. The International Journal of Advanced Manufacturing Technology. pp. 1-24. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)
Norazlianie, Sazali and Nor Hasrul Akhmal, Ngadiman (2020) Materials for Tribology’s Application: A Mini Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 177-185. ISSN 2289-7879. (Published)
Norazlianie, Sazali and Ramli, Junid and Siregar, J. P. (2020) Effect of Thermal Soak Time Towards Polyimide Based-Carbon Tubular Membrane. Journal of Advanced Research in Applied Mechanics, 66 (1). pp. 1-6. ISSN 2289-7895. (Published)
Norazlianie, Sazali and Ramli, Junid and Siregar, J. P. (2020) Polyimide Based-Carbon Membrane: Effect of Pyrolysis Environment. Journal of Advanced Research in Materials Science, 65 (1). pp. 16-22. ISSN 2289-7992. (Published)
Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2020) New Perspectives on Fuel Cell Technology: A Brief Review. Membranes, 10 (5). pp. 1-18. ISSN 2077-0375. (Published)
Norhafana, M. and M. M., Noor and A. A., Hairuddin and S., Harikrishnan and K., Kadirgama and D., Ramasamy (2020) The effects of nano-additives on exhaust emissions and toxicity on mankind. Materials Today: Proceedings, 22 (Part 3). pp. 1181-1185. ISSN 2214-7853. (Published)
Norhafana, M. and M. M., Noor and A. Aziz, Hairuddin (2020) Concentration measurement on preparation of blending SiO2 nano biodiesel. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-6., 736 (022114). ISSN 1757-899X (Published)
Norhafana, M. and M. M., Noor and Hagos, F. Y. and Hairuddin, A. A. (2020) Diesel and various blending nanoparticles based diesel, fuel properties study. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012061). ISSN 1757-899X (Published)
Norhafzan, Bariman (2020) Laser surface melting to enhance surface properties in hot press forming die. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).
Norizwan, Juraimi and Arman, Shah and Mas Ayu, Hassan and Mazlan, Mohamed and Kenzhaliyev, Bagdaulet and Mohammad, Khairudin and R., Daud and Abdelkarim, Hassan Abdelwahab (2020) Performance enhancement of energy saving and machining characteristic in electrical discharge machining on magnesium alloy: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 73 (2). pp. 29-45. ISSN 2289-7879. (Published)
Norsuhailizah, Sazali and Zawati, Harun and Norazlianie, Sazali (2020) A Review on Batch and Column Adsorption of Various Adsorbent Towards the Removal of Heavy Metal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). pp. 66-88. ISSN 2289-7879. (Published)
Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal profile and microstructure of wrought aluminium 7075 for semisolid metal processing. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7842 -7850. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Nur Fakhriah, Mohd Noordin (2020) Study of different fillers on aluminium alloys 6061 and 7075 by MIG welding. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nur Farizah Diana, Abdul Razak (2020) Vibration analysis and noise mapping of automotive radiator system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nur Farizah Diana, Abdul Razak and M. S. M., Sani and Azmi, W. H. (2020) Heat transfer augmentation in heat exchanger by using nanofluids and vibration excitation - A review. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7719-7733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi Putera, Zaini and Zulkifly, Ab Aziz and Nur Huda, Ramlan and Aiman, Mohd Halil (2020) Development of ect probe for back side crack evaluation. In: 11th IEEE Control and System Graduate Research Colloquium, ICSGRC 2020 , 8 August 2020 , Shah Alam. pp. 5-9. (9232475). ISBN 978-172815313-1 (Published)
Nurul Izzah, Ab Rahim (2020) Crash performance of polyurethane foam-filled aluminium column. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Salleh, Salwani).
Nurul Kamariah, Md Saiful Islam (2020) Effect of selective laser melting process parameters on properties of 316L stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Najihah, Mohd Nazri and Muhammad Uzair, Matalif and Mohd Azrul Hisham, Mohd Adib (2020) Effects of blood flow patent and cross-sectional area on hemodynamic into patient-specific cerebral aneurysm via fluid-structure interaction method : A review. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-8., 788 (012022). ISSN 1757-8981 (Published)
Q
Qaban, Abdullah and Mohmed, Tasneem and M. M., Quazi and Naher, Sumsun (2020) The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 25 (101362). pp. 1-11. ISSN 2352-4928. (Published)
Qayyum, Halim and N., Nik Abdullah and M. R. M., Rejab and M., Rashidi (2020) Fracture response of La61.4Al15.9Ni11.35Cu11.35 bulk metallic glass subjected to quasi-static compression loading. In: Materials Today: Proceedings, 1st International Conference on Advanced Light-weight Materials and Structures (ICALMS 2020) , 6-7 March 2020 , Hyderabad, Telangana, India.. pp. 1761-1767., 27 (Part 2). ISSN 2214-7853 (Published)
Quanjin, Ma and M. R. M., Rejab and Kang, Shaofu and Idris, Mat Sahat and M.A.A., M. Zin (2020) The energy-absorbing characteristics of single spherical-roof contoured-core (SRCC) cell with composite materials. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8265-8273. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Shukur, Abu Hassan and Manoj Kumar, Nallapaneni (2020) Effect of winding angle on the quasi-static crushing behaviour of thin-walled carbon fibre-reinforced polymer tubes. Polymers and Polymer Composites, 28 (7). pp. 462-472. ISSN 0967-3911. (Published)
Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Qayyum, Halim and Mohamad Nazirul Mubin, Merzuki and Mohamad Akmal Hakim, Darus (2020) Experimental investigation of the tensile test using digital image correlation (DIC) method. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020 , 6 - 7 March 2020 , Hyderabad, India. pp. 757-763., 27 (161490). ISSN 2214-7853 (Published)
Quazi, M. M. and M., Ishak and Fazal, M. A. and Arslan, A. and Rubaiee, Saeed and Qaban, Abdullah and Aiman, Mohd Halil and Sultan, Tipu and Ali, M. M. and Manladan, S. M. (2020) Current research and development status of dissimilar materials laser welding of titanium and its alloys. Optics & Laser Technology, 126 (106090). ISSN 0030-3992. (Published)
R
Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2020) An ergonomic perspective of user need on physio-treadmill (PhyMill) criteria: knowledge and awareness of cerebral palsy among future parents. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-9., 1529 (052071). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Ramkiran, B. and Sundarabalan, C. K. and Sudhakar, K. (2020) Performance evaluation of solar PV module with filters in an outdoor environment. Case Studies in Thermal Engineering, 21 (100700). pp. 1-9. ISSN 2214-157X. (Published)
Ramyashree, M. S. and Kumar, K. and Priya, S. Shanmuga and Sudhakar, K. (2020) Synthesis and characterisation of indium tin oxide thin films for dye-sensitised solar cells using natural fruit extracts. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). 9284 -9291. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Rejab, Mohd Ruzaimi Mat and Ishak, M. (2020) The mechanical behaviour of sandwich structure based on corrugated cores. , [Research Book Profile: Research Report] (Unpublished)
Rihayat, Teuku and Suryani, Salim and Fitriyani, C. N. and Aidy, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Synthesis and characterization of PLA-Chitosan-ZnO composite for packaging biofilms. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-9., 788 (012045). ISSN 1757-8981 (Published)
Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012042). ISSN 1757-8981 (Published)
Rihayat, Teuku and Suryani, Suryani and Hasanah, Uswatun and Nurhanifa, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012028). ISSN 1757-8981 (Published)
Rosdi, Daud and Almor, A. A. and Mas Ayu, Hassan and M., Safwan and S.H., Tomadi and A., Shah (2020) Design optimization of lightweight lower control arm using finite element method. Test Engineering & Management, 83 (May-June 202). pp. 1285-1291. ISSN 0193-4120. (Published)
S
S., Kesavarma and C. K., Kong and M., Samykano and K., Kadirgama and A. K., Pandey (2020) Bending properties of 3D printed coconut wood-PLA composite. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052031). ISSN 1757-8981 (Published)
S., Shalbi and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2020) A Simulation on Desired Neutron Flux for The Boron Neutron Capture Therapy (BNCT) Purpose by Using Monte Carlo N-Particle (MCNPX). In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (062022). ISSN 1757-899X (Published)
S., Sreenath and K., Sudhakar and A. F., Yusop (2020) Solar photovoltaics in airport: Risk assessment and mitigation strategies. Environmental Impact Assessment Review, 84 (106418). pp. 1-11. ISSN 0195-9255. (Published)
S., Sreenath and K., Sudhakar and A. F., Yusop and Solomin, Evgeny and I. M., Kirpichnikova (2020) Solar PV energy system in Malaysian airport: Glare analysis, general design and performance assessment. Energy Reports, 6. pp. 698-712. ISSN 2352-4847. (Published)
Safitri, Nelly and Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Jazuli, Muhammad and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Efficiency of photovoltaic technology for Citronella oil distillation. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012079). ISSN 1757-8981 (Published)
Sahu, Alok K. and Sudhakar, Kumarasamy and Sarviya, Rishindra Mohan (2020) U.V light effect on the mechanical behaviour of HDPE/Carbon black composites. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012054). ISSN 1757-8981 (Published)
Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed and Munirah, Sha’ban and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2020) Experimental investigation of biological and mechanical properties of CoCrMo based selective laser melted metamaterials for bone implant manufacturing. Procedia CIRP, 89. pp. 79-91. ISSN 2212-8271. (Published)
Sakinah, Hisham and K., Kadirgama and Mohammed, Hussein A. and Kumar, Amit and D., Ramasamy and Mahendran, Samykano and Rahman, Saidur (2020) Hybrid nanocellulose-copper (II) oxide as engine oil additives for tribological behavior improvement. Molecules, 25 (13). pp. 1-16. ISSN 1420-3049 (print); 1420-3049 (online). (Published)
Salikandi, Mohammad and Ranjbar, Benyamin and Shirkhan, Elahe and Priya, S. Shanmuga and Thirunavukkarasu, I. and Sudhakar, K. (2020) Recent trends in liquid desiccant materials and cooling systems : application, performance and regeneration characteristics. Journal of Building Engineering, 33 (101579). pp. 1-15. ISSN 2352-7102. (Published)
Salwani, Mohd Salleh and Mohamad Hisyam, K. (2020) Crash Performance of Double Hat Column Subjected to Compression Loading. In: IOP Conference Series: Materials Science and Engineering, 6th International Conference on Advances in Mechanical Engineering (ICAME 2019) , 14-16 August 2019 , Kota Kinabalu, Sabah, Malaysia. pp. 1-5., 834 (012050). ISSN 1757-899X (Published)
Sanderasagran, A. N. and Azizuddin, Abd Aziz and Daing Mohamad Nafiz, Daing Idris (2020) Real-time computational fluid dynamics flow response visualisation and interaction application based on augmented reality. Journal of Information and Communication Technology, 19 (4). pp. 559-581. ISSN 1675-414X (Print); 2180-3862 (Online). (Published)
Sasikumar, Subramaniam Babu and Santhanam, Harikrishnan and M. M., Noor and Devasenan, Madhesh and Hafiz, Muhammad Ali (2020) Experimental investigation of parallel type evacuated tube solar collector using nanofluids. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-13. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)
Singh, Yashvir and Sharma, Abhishek and Singh, Nishant Kumar and M. M., Noor (2020) Effect of SiC nanoparticles concentration on novel feedstock Moringa Oleifera chemically treated with neopentylglycol and their tribological behavior. Fuel, 280 (118630). pp. 1-12. ISSN 0016-2361. (Published)
Siregar, J. P. and M. R. M., Rejab and Jamiluddin, Jaafar and Zalinawati, Muhamad and Cionita, Tezara and Mawarnie, Ismail and M.H.M., Hamdan (2020) Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 1729-1734., 46. ISSN 2214-7853 (Published)
Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Aiman, Mohd Halil and M., Ishak (2020) Effect of LST parameter on surface morphology of modified copper substrates. Jurnal Tribologi, 26. pp. 84-91. ISSN 2289-7232. (Published)
Siti Noradila, Abdullah and Norazlianie, Sazali and Ahmad Shahir, Jamaludin (2020) Study on Thickness of Low Carbon Steel in Rapid Cooling Process: A Short Review. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 52-59. ISSN 2636-9575. (Published)
Siti Nur Alwani, Shafie and Muhammad Amirul Mukmin, Marzuki and Nik Abdul Hadi, Md Nordin and Muhammad Roil, Bilad and Norazlianie, Sazali and Noor Maizura, Ismail and A. F., Ismail (2020) Performance and Characterizations of [EMIM][Tf2N] and Silica Direct Blending in Mixed Matrix Membrane for CO2 /CH4 Separation. Journal of Membrane Science and Research (JMSR), 6 (4). pp. 395-400. ISSN 2476-5406. (Published)
Siti Rabiatull Aisha, Idris (2020) Pembelajaran outdoor dalam norma yang baharu apakah cabarannya. UMP News .
Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2020) Technical assessment of captive solar power plant: A case study of Senai Airport, Malaysia. Renewable Energy, 152. pp. 849-866. ISSN 0960-1481. (Published)
Sreenath, Sukumaran and Sudhakar, Kumarasamy and Ahmad Fitri, Yusop (2020) Airport-based photovoltaic applications. Progress in Photovoltaics: Research and Applications, 28 (8). pp. 833-853. (Published)
Srinivasarao, P. and Peddakapu, K. and M. R., Mohamed and Deepika, K.K. and Sudhakar, K. (2020) Simulation and experimental design of adaptive-based maximum power point tracking methods for photovoltaic systems. Computers and Electrical Engineering, 89 (106910). pp. 1-21. ISSN 0045-7906. (Published)
Suryani, . and Rihayat, Teuku and Nurhanifa, . and Siregar, J. P. and Jaafar, J. and Cionita, T. and Fitria, . (2020) Green composites of natural fiber bamboo/pineapple leaf/coconut husk as hybrid materials. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-10., 788 (012038). ISSN 1757-8981 (Published)
Syahrul Ramadhan, A. K. A. and Jasri, Mohamad and Bazli, M. A. (2020) Determining dominant process parameters in polyester yarn winding. Journal of Industrial and Modern Manufacturing, 1 (2). pp. 12-17. ISSN 2716-5965. (Published)
T
Thotakura, Sandhya and Kondamudi, Sri Chandan and Xavier, J. Francis and Quanjin, Ma and Reddy, Guduru Ramakrishna and Gangwar, Pavan and Davuluri, Sri Lakshmi (2020) Operational performance of megawatt-scale grid integrated rooftop solar PV system in tropical wet and dry climates of India. Case Studies in Thermal Engineering, 18 (100602). pp. 1-11. ISSN 2214-157X. (Published)
U
Urmi, Wajiha Tasnim and M. M., Rahman and Azmi, W. H. and K., Kadirgama and D., Ramasamy and Maleque, M. A. (2020) Experimental Investigation on the Stability of 40% Ethylene Glycol Based TiO2-Al2O3 Hybrid Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 110-121. ISSN 2289-7879. (Published)
V
Vorathin, E. and Z. M., Hafizi (2020) Bandwidth modulation and centre wavelength shift of a single FBG for simultaneous water level and temperature sensing. Measurement, 163 (107955). pp. 1-8. ISSN 0263-2241. (Published)
W
W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Athikary, B. and M. S. M., Sani (2020) Correlating finite element model of a car spot-welded front-end module in the light of modal testing data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7974 -7984. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. R., Radin (2020) Preparation, stability and wettability of nanofluid: a review. Journal of Mechanical Engineering and Sciences (JMES), 14 (3). 7244 -7257. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Md Abdul, Maleque (2020) An overview on synthesis, stability, opportunities and challenges of nanofluids. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 30-37., 41 (168124). ISSN 2214-7853 (Published)
Wan Muhammad Noor Sarbani, Mat Daud (2020) Elak jadi mangsa penjajahan digital. Utusan Malaysia .
Wan N., Wan Ab Naim and Mohd J. Mohamed, Mokhtarudin and Einly, Lim and Bee, T. Chan and Azam, Ahmad Bakir and Nik A., Nik Mohamed (2020) The study of border zone formation in ischemic heart using electro-chemical coupled computational model. International Journal for Numerical Methods In Biomedical Engineering, 35 (11). pp. 1-15. ISSN 2040-7939 (print); 2040-7947 (online). (Published)
Wan Nor Maawa, Wan Ghazali (2020) Performance, combustion and emissions analysis of water emulsified biodiesel in a diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Wan Sharuzi, Wan Harun (2020) Malaysia hungers for more Professional Engineers. UMP News .
Wan Sharuzi, Wan Harun (2020) Our nation desperate for more Professional Engineer. UMP News .
Y
Yusof, Hashim (2020) The impact of organizational ergonomic risk factors on musculoskeletal disorders and driving fatigue towards near miss accident amongst Malaysian express bus drivers. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Z
Z. M., Hafizi and Vorathin, E. (2020) A temperature-compensated FBG pressure sensor for underwater pipeline monitoring. In: IEEE 8th International Conference on Photonics (ICP 2020) , 16-18 March 2020 , Kota Bharu, Malaysia. pp. 1-5.. ISBN 978-1-7281-0518-5 (Published)
Zainal Ambri, Abdul Karim and Kaur, Eesha and Syed Masharuddin, Syed Muhammad and Khan, Mohammed Yahaya and Hagos, F. Y. (2020) The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer. Alexandria Engineering Journal, 59 (1). pp. 227-237. ISSN 1110-0168. (Published)
Zainon, S. N. M. and Azmi, W. H. (2020) Forced convection heat transfer and friction factor of water/bio-glycol mixture based TiO2-SiO2 nanofluids. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems (SES 2019) , 1-2 October 2019 , Kuantan, Pahang, Malaysia. pp. 1-3., 863 (012051). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Zuhaira, Abdullah (2020) Analysis of long-chain alcoholbiodiesel-diesel tri-fuel blends on combustion characteristics, engine performances and exhaust emissions of diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).