Browse by ID Staff

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | E | F | G | H | I | J | K | M | R | S | T | W | Y | Z
Number of items: 123.

A

Abdul Syakir, Abdul Mubin and Norhafizan, Ahmad and Azuddin, Mamat and Zahari, Taha and Iskandar, Hasanuddin (2015) CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations. Advances in Mechanical Engineering, 7 (1). pp. 1-10. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)

Ahamed, N. U. and Zahari, Taha and Ismail, Mohd Khairuddin and Rabbi, M. F. and Rahaman, S. A. M. Matiur and Sundaraj, Kenneth (2016) Fuzzy Logic Controller Design for Intelligent Air-Conditioning System. In: IEEE 2nd International Conference on Control Science and Systems Engineering (ICCSSE 2016) , 27-29 July 2016 , Singapore. pp. 232-236.. ISBN 978-1-4673-9872-5

Ahamed, Nizam Uddin and Rabbi, M. F. and Zahari, Taha and K., Sundaraj and Tasriva, Sikandar (2017) The Effects of Rest Interval on Electromyographic Signal on Upper Limb Muscle during Contraction. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 10-13. ISBN 978-981-10-3736-8

Ahamed, Nizam Uddin and Zahari, Taha and Ismail, Mohd Khairuddin and Rabbi, M. F. and Sikandar, Tasriva and Palaniappan, Rajkumar and Ali, Md. Asraf and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2017) Development of Fuzzy Inference System for Automatic Tea Making. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , Shah Alam, Malaysia.. pp. 196-201.. ISBN 978-1-5090-4186-2

Ahamed, Nizam Uddin and Zahari, Taha and Sundaraj, Kenneth (2016) Age Related Differences in the Surface EMG Signals on Adolescent's Muscle during Contraction. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-6., 114 (012131). ISSN 1757-8981 (Print); 1757-899X (Online)

Amir Radzi, Ab. Ghani and M. A., Hasan and M., Hamdi and Zahari, Taha (2011) Impact response of multi slotted square column. Journal of Mechanical Engineering, 8 (2). pp. 71-91. ISSN 1823-5514. (Published)

Anwar, P. P. Abdul Majeed and Zahari, Taha and A. F. Z., Abidin and Muhammad Aizzat, Zakaria and Ismail, Mohd Khairuddin and M. A. M., Razman and Z., Mohamed (2017) The Control of a Lower Limb Exoskeleton for Gait Rehabilitation: A Hybrid Active Force Control Approach. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016 , 17- 20 December 2016 , Hosei UniversityTokyo; Japan. pp. 183-190., 105. ISSN 1877-0509

Anwar, P. P. Abdul Majeed and Zahari, Taha and Ismail, Mohd Khairuddin and Mohd Yashim, Wong Paul Tze and Muhammad Amirul, Abdullah and Mohd Azraai, M. Razman (2017) The Control of an Upper-Limb Exoskeleton by Means of a Particle Swarm Optimised Active Force Control for Motor Recovery. In: IFMBE Proceedings: 3rd International Conference on Movement, Health & Exercise (MoHE 2016) , 28-30 September 2016 , Melaka, Malaysia. pp. 56-62., 58. ISBN 978-981-10-3737-5

Anwar, P. P. Abdul Majeed and Zahari, Taha and M. A., Abdullah and I.M., Khairuddin and M. A., Zakaria (2018) The control of an upper limb exoskeleton system for passive stroke rehabilitation: An active force control approach. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 297-298.. ISBN 9789672145202

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohammed A., Hashem Ali and Ismail, Mohd Khairuddin and Deboucha, Abdelhakim and Mohd Yashim, Wong Paul Tze and Amar Faiz, Zainal Abidin (2018) A hybrid active force control of a lower limb exoskeleton for gait rehabilitation. Biomedizinische Technik, 63 (4). pp. 491-500. ISSN 0013-5585. (Published)

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Nina Nadia, Sahim (2013) An Overview Of Sports Engineering: History, Impact And Research. Movement, Health & Exercise (MoHE), 2. pp. 1-14. ISSN 2231-9409. (Published)

Azeddien, Kinsheel and Zahari, Taha and Abdelhakim, Deboucha and Tuan Mohammad Yusoff, Tuan Ya (2012) Robust Least Square Estimation Of The CRS A465 Robot Arm's Dynamic Model Parameters. Journal of Mechanical Engineering Research, 4 (3). pp. 89-99. ISSN 2141-2383. (Published)

E

Ebrahim, Nader Ale and Shamsuddin, Ahmed and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2012) Effective Virtual Teams for New Product Development. Scientific Research and Essay , 7 (21). pp. 1971-1985. ISSN 1992-2248. (Published)

F

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Farah Ayuni, Fauzi and Zahari, Taha and Zakri, Ghazalli and Siregar, J. P. and Zulkifli, Ahmad@Manap and K., Kadirgama and Nasrul Hadi, Johari and Danial, Mohamed (2017) Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In: Advances in Human Factors in Sports and Outdoor Recreation. Advances in Intelligent Systems and Computing, 496 . Springer International Publishing, Switzerland, pp. 131-140. ISBN 978-3-319-41952-7

Farzad, Tahriri and Zahari, Taha (2010) The Concept of Integrating Virtual Group (VG) and Agile Supplier Selection (ASS). Journal of Business Management and Economics, 1 (1). pp. 32-37. (Published)

G

Gesang, Nugroho and Zahari, Taha and Tedy, Setya Nugraha and Hatyo, Hadsanggeni (2015) Development of a Fixed Wing Unmanned Aerial Vehicle (UAV) for Disaster Area Monitoring and Mapping. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 6 (2). pp. 83-88. ISSN 2087-3379. (Published)

H

H. A., Salaam and Zahari, Taha and T. M. Y. S., Tuan Ya (2018) Multi objective optimization using genetic algorithm of a pneumatic connector. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012071). ISSN 1757-8981 (Print), 1757-899X (Online)

H. A., Salaam and Zahari, Taha and T.M.Y.S, Tuan Ya and Mohd Razali, Mohamad (2014) Sustainability Product Design Assessment: A Case Study of a Screw Design. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. pp. 517-524..

H. A., Salaam and Zahari, Taha and Tuan Mohammad Yusoff, Tuan Ya (2012) Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining. Applied Mechanics and Materials, 217-219. pp. 2012-2015. ISSN 1662-7482. (Published)

I

Iskandar, Hasanuddin and Zahari, Taha and Nukman, Y. and Norhafizan, Ahmad and Raja Ariffin, Raja Ghazilla and Tuan Mohammad Yusoff Shah, Tuan Ya (2015) Investigation of the Head Impact Power of a Sepak Takraw Ball on Sepak Takraw Players. Movement, Health & Exercise (MoHE), 4 (2). pp. 45-56. ISSN 2231-9409. (Published)

Ismail, Mohd Khairuddin and Zahari, Taha and Anwar, P. P. Abdul Majeed and Abdel Hakeem, Deboucha and Mohd Azraai, M. Razman and Abdul Aziz, Jaafar and Zulkifli, Mohamed (2016) A Hybrid Joint Based Controller for an Upper Extremity Exoskeleton. Materials Science and Engineering, 114. pp. 1-8. ISSN 1757-899X. (Published)

J

Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund and Lim, Shi Xuen (2022) Evaluation of the Transfer Learning Models in Wafer Defects Classification. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 873-881., 730. ISBN https://doi.org/10.1007/978-981-33-4597-3_78

K

K., Kadirgama and Zahari, Taha and Abdul Rahim, Ismail and Azrul, Hisham and A., Zulkifli and Nasrul Hadi, Johari and Zulfika, Anuar (2013) Effect of knee pad on kicking a ball and gait analysis. Movement, Health & Exercise, 2 (1). pp. 41-46. ISSN 2289-9510. (Published)

M

M., Azuddin and Zahari, Taha (2016) Micro Plastic Part Filling Capabilities through Simulation and Experiment A Case Study on Micro Gear Shape. In: Comprehensive Materials Finishing. Elsevier , pp. 441-465. ISBN 978-0-12-803249-7

M. A., Aris and Zahari, Taha and M. H. A., Hassan (2013) The Influence of Football Boot Construction on Ball Velocity and Deformation. In: International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

M. A., Hassan and Amir Radzi, Ab. Ghani and Zahari, Taha and M. A., Hamdi (2015) Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base. Applied Mathematics & Information Sciences, 9. pp. 51-58. ISSN 1935-0090. (Published)

M. H. A., Hassan and Zahari, Taha and Zulfika, Anuar and M. A., Aris (2013) Brain Acceleration During Ball-To-Head Impact in Soccer. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Mohd Ali Hanafiah, Shaharudin and Zahari, Taha (2017) Numerical Model of Heat Transfer Coefficient in Hot Stamping Process. Applied Mathematics & Information Sciences, 11 (2). pp. 401-406. ISSN 1935-0090 (Print); 2325-0399 (Online) . (Published)

Mohd Azraai, Mohd Razman and Susto, Gian Antonio and Cenedese, Angelo and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Ahmad Shahrizan, Abdul Ghani and Faeiz Azizi, Adnan and Khairul Muttaqin, Ismail and Zahari, Taha and Mukai, Yukinori (2019) Hunger classification of Lates calcarifer by means of an automated feeder and image processing. Computers and Electronics in Agriculture, 163. pp. 1-8. ISSN 0168-1699. (Published)

Mohd Fadzil, Abdul Rahim and A. A., Jaafar and R., Mamat and Zahari, Taha (2020) Parametric study of CNG-DI engine operational parameters by using analytical vehicle model. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 611-616.. ISBN 978-981-15-0950-6

Mohd Fadzil, Abdul Rahim and Zahari, Taha and Rizalman, Mamat (2017) Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method. IOP Conference Series: Materials Science and Engineering, 257. pp. 1-21. ISSN 1757-8981 (Printed); 1757-899X(Online). (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

Mohd Fawzi, Zamri and Zahari, Taha and A. R., Yusoff and Mohamad Farid, Mohamad Sharif and Mohd Ali Hanafiah, Shaharudin (2014) Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis. Advanced Materials Research, 903. pp. 163-168. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2017) Analytical modelling of protective headgear for soccer players. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 66-67. ISBN 9789670257884

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2015) Finite Element Analysis of Soccer Heading. Procedia Engineering, 112. pp. 46-51. ISSN 1877-7058. (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2018) The effect of spin and friction on reaction forces in a soccer ball impact: A computational study. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 87-88.. ISBN 9789672145202

Mohd Hasnun Ariff, Hassan and Zahari, Taha and I., Hasanuddin and Anwar, P. P. Abdul Majeed and H., Mustafa and Nur Aqilah, Othman (2020) A simplified human head finite element model for brain injury assessment of blunt impacts. Journal of Mechanical Engineering and Sciences (JMES), 14 (2). 6538 -6547. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hasnun Ariff, Hassan and Zahari, Taha and Iskandar, Hasanuddin and Mohd Jamil Mohamed, Mokhtarudin (2018) Mechanics of Soccer Heading and Protective Headgear. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore. ISBN 978-981-13-0271-8

Mohd Hazwan Syafiq , Harun and Zahari, Taha and Hadi, Abdul Salaam (2013) Sustainable Manufacturing: Effect of Material Selection and Design to the Environmental Impact in the Manufacturing Process. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 50 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Idris Shah, Ismail and Zahari, Taha (2014) Surface Hardening of Tool Steel by Plasma Arc with Multiple Passes. International Journal of Technology, 5 (1). pp. 79-87. ISSN 2086-9614. (Published)

Muhammad Aizzat, Zakaria and Anwar, P. P. A. Majeed and Ismail, Mohd Khairuddin and Zahari, Taha (2017) Kinematics Analysis of a 3DoF Lower Limb Exoskeleton for Gait Rehabilitation: A Preliminary Investigation. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 168-172. ISBN 978-981-10-3736-8

Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Zahari, Taha and M. M., Alim and Baarath, K. (2018) Forward and inverse predictive model for the trajectory tracking control of a lower limb exoskeleton for gait rehabilitation: simulation modelling analysis. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Zahari, Taha (2019) A machine learning approach of predicting high potential archers by means of physical fitness indicators. PLoS ONE, 14 (1). pp. 1-12. ISSN 1932-6203. (Published)

R

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Anthropometry correlation towards archery performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 29-35. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Bio-Physiological Indicators in Evaluating Archery Performance. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 13-20. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Concluding remarks. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, p. 45. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Machine Learning in Sports: Identifying Potential Archers. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-9. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psycho-fitness parameters in the identification of high-potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 37-44. ISBN 978-981-13-2592-2

Rabiu Muazu, Musa and Zahari, Taha and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah (2019) Psychological variables in ascertaining potential archers. In: Machine Learning in Sports. SpringerBriefs in Applied Sciences and Technology . Springer Singapore, Singapore, pp. 21-27. ISBN 978-981-13-2592-2

Raja Ariffin, Raja Ghazilla and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Sakundarini, Novita and Gonzales, Julirose (2012) Product Recovery Oriented Approach For Fastener Selection During Conceptual Design. International Journal of Sustainable Design, 2 (1). pp. 64-82. ISSN 1743-8284 (Print); 1743-8292 (Online). (Published)

Rossi, Passarella and Zahari, Taha (2012) Lightweight Solar Vehicle Impact Analysis Using ABAQUS/EXPLICIT. Computer Engineering and Applications, 1 (2). pp. 85-96. ISSN 2252-4274 (Print); 2252-5459 (Online). (Published)

Ruhaizin, Sulaiman and Zahari, Taha and Siti Zawiah, Md. Dawal (2013) Application of Anthropometric Dimensions for Estimating Stove Height, Stove Depth and Cooking Task Envelope for Malaysian Elderly Population. Pertanika Journal of Science & Technology (JST), 21 (1). pp. 283-298. ISSN 0128-7680. (Published)

S

Sakundarini, Novita and Zahari, Taha and Raja Ariffin, Raja Ghazillaa and Salwa Hanim, Abdul Rashid and Gonzales, Julirose (2012) A framework of integrated recyclability tools for automobile design. International Journal of Industrial Engineering, 19 (10). pp. 401-411. ISSN 1943-670X. (Published)

Sakundarini, Novita and Zahari, Taha and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla and Gonzales, Julirose (2013) Multi-Objective Optimization For High Recyclability Material Selection Using Genetic Algorithm. The International Journal of Advanced Manufacturing Technology, 68 (5-8). pp. 1441-1451. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Sin-Ye, Phoon and Hwa, Jen Yap and Zahari, Taha and Yun, Suen Pai (2017) Interactive Solution Approach For Loop Layout Problem Using Virtual Reality Technology. The International Journal of Advanced Manufacturing Technology, 89 (5-8). pp. 2375-2385. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Sugoro Bhakti , Sutono and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2017) Integration of Grey-Based Taguchi Method and Principal Component Analysis for Multi-Response Decision-Making in Kansei Engineering. European Journal of Industrial Engineering, 11 (2). pp. 205-227. ISSN 1751-5254 (Print); 1751-5262 (Online). (Published)

T

Tahriri, Farzad and Siti Zawiah, Md Dawal and Zahari, Taha (2014) Multiobjective Fuzzy Mixed Assembly Line Sequencing Optimization Model. Journal of Applied Mathematics. pp. 1-19. ISSN 1110-757X (print); 1687-0042 (online). (Published)

W

Wan Hasbullah, Mohd Isa and Zahari, Taha and Ismail, Mohd Khairuddin and Anwar, P. P. A. Majeed and Khairul Fikri, Muhammad and Ali, Mohammed A. H. and Jamaluddin, Mahmud and Zulkifli, Mohamed (2016) An Intelligent Active Force Control Algorithm to Control an Upper Extremity Exoskeleton for Motor Recovery. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-9., 114. ISSN 1757-8981 (Print), 1757-899X (Online)

Y

Yusof, Hashim and Zahari, Taha (2014) The Impact of Ergonomics Driving Risk Factors on Musculoskeletal Health of Malaysian Express Bus Drivers. International Journal of Contemporary Business Management (IJCBM), 1 (1). pp. 20-29. (Published)

Yusof, Hashim and Zahari, Taha (2015) Partial Least Square Method For Modelling Ergonomic Risks Factors On Express Bus Accidents In The East Coast Of Peninsular West Malaysia. In: AIP Conference Proceeding, 166, 1643 :The 2nd ISM International Statistical Conference (ISM-II 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. p. 166..

Z

Zahari, Taha (2014) Technological Innovation for the Development of Industry in Aceh. In: 4th Annual International Conference (AIC) of Syiah Kuala University , 21-24 October 2014 , Banda Aceh, Indonesia. .

Zahari, Taha and Aris, Mohd Azri and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Nina Nadia, Sahim (2013) A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Advanced Materials Research. ISSN 1022-6680. (Published)

Zahari, Taha and Farzad, Tahriri and Siti Zawiah, Md Dawal (2014) Fuzzy Mixed Assembly Line Sequencing and Scheduling Optimization Model Using Multiobjective Dynamic Fuzzy GA. The Scientific World Journal, 2014. pp. 1-20. ISSN 2356-6140 (print); 1537-744X (online). (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) A Comparison of Two Approaches for Collision Avoidance of an Automated Guided Vehicle Using Monocular Vision. Applied Mechanics and Materials, 145. pp. 547-551. ISSN 1662-7482. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2012) Landmark Navigation in Low Illumination Using Omnidirectional Camera. In: The 9th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI 2012) , 26-28 November 2012 , Daejeon Convention Center (DCC), Daejeon, Korea. . (Unpublished)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris (2013) The Efficacy of Impact-Absorbing Materials during Collision with a Soccer Ball. Applied Mechanics and Materials, 440. pp. 363-368. ISSN 1662-7482. (Published)

Zahari, Taha and Nahidul Hoque , Samrat and Norhafizan, Ahmad and Choudhury, I.A. (2014) Prospect of Wave Energy in Malaysia. In: IEEE 8th International Power Engineering and Optimization Conference (PEOCO 2014) , 24-25 March 2014 , Langkawi. pp. 127-132..

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md. Dawal (2014) Axiomatic Design Principles in Analysing the Ergonomics Design Parameter of a Virtual Environment. International Journal of Industrial Ergonomics, 44 (3). pp. 368-373. ISSN 0169-8141. (Published)

Zahari, Taha and Yusof, Hashim (2014) Ergonomic Assessment on Physical Fatigue among Malaysian Express Bus Drivers: Partial Least Squares (PLS) Approach. In: Proceedings of the Asia Pasific Industrial Engineering & Management System (APIEMS 2014) , 12-15 October 2014 , Jeju, Korea. .

Zahari, Taha A Recipe for Innovation. Pekan Review, 5 . p. 55. ISSN 2180-3099

Zahari, Taha (2014) Tun Mahathir penggerak Industri Automotif Negara. CREATE . pp. 10-11. ISSN 1823-7487

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Ali, Mohammed A. H. and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman (2016) Modelling and Control of an Upper Extremity Exoskeleton for Rehabilitation. IOP Conference Series: Materials Science and Engineering, 114 (012134). pp. 1-8. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Zahari, Taha and Anwar, P. P. Abdul Majeed and Ismail, Mohd Khairuddin and M. Y., Wong and M. A., Abdullah and M. A., Mohd Razman (2017) The Control of an Upper-Limb CC by Means of a Particle Swarm Optimized Active Force Control for Motor Recovery. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 56-62. ISBN 978-981-10-3736-8

Zahari, Taha and Anwar, P. P. Abdul Majeed and M. A., Abdullah and I.M., Khairuddin and M.A., Zakaria and M. H. A., Hassan (2017) The identification and control of an upper extremity exoskeleton for motor recovery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), p. 483. ISBN 9789670257884

Zahari, Taha and Chei, Ming Lee and Nizam, U. Ahamed and Saju, Joseph and S. Faris, S. Omar (2016) Performance Analysis in Strength Training: An Innovative Instrumentation. Procedia Engineering, 147. pp. 455-460. ISSN 1877-7058. (Published)

Zahari, Taha and Deboucha, Abdelhakim and Ahamed, Nizam Uddin and Anwar, P. P. A. Majeed and Wong, Yashim (2015) IIR Filter Order and Cut-off Frequency Influences on EMG Signal Smoothing. Biomedical Research (India), 26 (4). pp. 616-620. ISSN 0970-938X . (Published)

Zahari, Taha and H. A., Salaam and Tuan Mohammad Yusoff, Tuan Ya (2015) Triple Bottom Line Optimization for Sustainable Product Design. In: The 16th Asia Pacific Industrial Engineering and Management System Conference , 8-11 December 2015 , Caravelle Hotel, Ho Chi Minh City, Vietnam. . (Unpublished)

Zahari, Taha and Hadi, Abdul Salaam and Tuan Mohammad Yusoff, Tuan Ya and S. Y., Phoon and C. F., Tan and M. A., Akiah (2013) Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1477-1586. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zahari, Taha and Haque, Mainul and Musa, Rabiu Muazu and Mohamad Razali, Abdullah and Maliki, Ahmad Bisyri Husin Musawi and Norzulaika, Alias and Norlaila Azura, Kosni (2017) Intelligent Prediction of Suitable Physical Characteristics Toward Archery Performance Using Multivariate Techniques. Journal of Global Pharma Technology, 9 (7). pp. 44-52. ISSN 0975 -8542. (Published)

Zahari, Taha and Hwa, Jen Yap and Mohammad Syawaludin Syafiq, Hassan and Wee, Kian Yeo (2015) Digital Analysis of Badminton Athlete Motion. In: International Conference on Movement, Health and Exercise (MOHE 2015) , 5-7 Oct 2015 , Penang. . (Unpublished)

Zahari, Taha and Jessnor, Arif Mat-Jizat and Syed Faris, Syed Omar and Suwarganda, Edin (2016) Correlation between Archer's Hands Movement While Shooting and its Score. Procedia Engineering, 147. pp. 145-150. ISSN 1877-7058. (Published)

Zahari, Taha and Jessnor Arif, Mat Jizat (2015) Landmark Tracking Using Unrectified Omniirectional Image for an Automated Guided Vehicle. In: Robot Intelligence Technology and Applications 3. Advances in Intelligent Systems and Computing, 345 . Springer, Switzerland, pp. 663-673. ISBN 978-3-319-16840-1 (print); 978-3-319-16841-8 (online)

Zahari, Taha and Jessnor Arif, Mat Jizat and Ismayuzri, Ishak (2012) Bar Code Detection Using Omnidirectional Vision for Automated Guided Vehicle Navigation. In: International Conference for Automatic Control and Artificial Intelligence 2012 , 24-27 March 2012 , Xiamen, China. . (Unpublished)

Zahari, Taha and Jessnor Arif, Mat-Jizat and Muhammad Amirul, Abdullah and Mohamad Razali, Abdullah and Musa, Rabiu Muazu and Mohamad Fauzi, Ibrahim and Mohd Ali Hanafiah, Shaharudin (2017) Integrated multi sensors and camera video sequence application for performance monitoring in archery. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Zahari, Taha and Kun, Liu and Wang, Hongrui and Xiao, Jinzhuang (2015) Analysis of Human Standing Balance by Largest Lyapunov Exponent. Computational Intelligence and Neuroscience, 2015. pp. 1-10. ISSN 1687-5265 (print); 1687-5273 (online). (Published)

Zahari, Taha and Lum, Shirley and Mohd Azraai, Mohd Razman (2017) A Review on Non-Invasive Hypertension Monitoring System by using Photoplethysmography Method. Movement, Health & Exercise (MoHE), 6 (1). pp. 47-57. ISSN 2231-9409. (Published)

Zahari, Taha and M. A. M., Razman and Ahmad Shahrizan, Abdul Ghani and A. P. P., Abdul Majeed and R. M., Musa and F. A., Adnan and M. F., Sallehudin and Y., Mukai (2018) The classification of hunger behaviour of Lates Calcarifer through the integration of image processing technique and k-Nearest Neighbour learning algorithm. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-5., 342 (012017). ISSN 1757-8981

Zahari, Taha and M. Ali, Hanafiah (2015) Estimation of Thermal Contact Conductance Between Blank and Tool Surface in Hot Stamping Process. In: International Manufacturing Engineering Conference (IMEC 2015) , 12-14 Nov 2015 , Kuala Lumpur. . (Unpublished)

Zahari, Taha and Mohammad Syawaludin, Syafiq Hassan and Hwa, Jen Yap and Wee, Kian Yeo (2016) Preliminary Investigation of an Innovative Digital Motion Analysis Device for Badminton Athlete Performance Evaluation. Procedia Engineering, 147. pp. 461-465. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Azraai, M. Razman and N. F., Adnan (2018) The Identification of hunger behaviour of lates calcarifer using k-nearest neighbour. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 393-399. ISBN 9789811087875

Zahari, Taha and Mohd Azraai, Mohd Razman and Faeiz Azizi, Adnan and Anwar, P. P. A. Majeed and Rabiu Muazu, Musa (2017) The Development of the Putt.It.In Monitoring Device and the Establishment of Its Reliability: A Solution for Putting-In Analysis in Golf. Movement, Health & Exercise (MoHE), 6 (1). pp. 31-38. ISSN 2231-9409. (Published)

Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2016) Parametric Analysis of the Influence of Elastomeric Foam on the Head Response During Soccer Heading Manoeuvre. Procedia Engineering, 147. pp. 139-144. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2017) A Reaction-Force-Validated Soccer Ball Finite Element Model. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231 (1). pp. 43-49. ISSN 1754-338X. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Hasanuddin, Iskandar and Mohd Azri, Aris and Anwar, P. P. A. Majeed (2014) Impact-absorbing Materials in Reducing Brain Vibration Caused by Ball-to-head Impact in Soccer. Procedia Engineering: The Engineering of Sport 10, 72. pp. 515-520. ISSN 1877-7058. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Iskandar, Hasanuddin (2015) Analytical Modelling of Soccer Heading. Sadhana, 40 (5). pp. 1567-1578. ISSN 0256-2499 (Print); 0973-7677 (Online). (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Zulfika, Anuar (2013) Predicting Brain Acceleration During Heading Of Soccer Ball. Materials Science and Engineering, 50. pp. 1-6. ISSN 1757-899X. (Published)

Zahari, Taha and Muhammad Muaz, Alim and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Mohd Ali Hanafiah, Shaharudin and M. H. A., Hassan (2018) The identification and control of a finger exoskeleton for grasping rehabilitation. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 177-182. ISBN 9789811087875

Zahari, Taha and Muhammad Syukur, Norman and Syed Faris, Syed Omar and Edin, Suwarganda (2016) A Finite Element Analysis of a Human Foot Model to Simulate Neutral Standing on Ground. Procedia Engineering, 147. pp. 240-245. ISSN 1877-7058. (Published)

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and M. H. A., Hassan (2018) Classification of high performance archers by means of bio-physiological performance variables via k-nearest neighbour classification model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 377-384. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and M. H. A., Hassan (2018) Talent identification of potential archers through fitness and motor ability performance variables by means of artificial neural network. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 371-376. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan (2018) The application of support vector machine in classifying potential archers using bio-mechanical indicators. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 385-391. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan and Zubair, Khalil (2018) The employment of Support Vector Machine to classify high and low performance archers based on bio-physiological variables. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012020). ISSN 1757-899X

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Muaz, Alim and Ahmad Fakhri, Ab. Nasir (2018) The application of k -Nearest Neighbour in the identification of high potential archers based on relative psychological coping skills variables. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012019). ISSN 1757-899X

Zahari, Taha and Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Aizzat, Zakaria and Muhammad Muaz, Alim and Jessnor Arif, Mat Jizat and Mohamad Fauzi, Ibrahim (2018) The identification of high potential archers based on relative psychological coping skills variables: A Support Vector Machine approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319.

Zahari, Taha and Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Muhammad Muaz, Alim and Mohamad Razali, Abdullah (2018) The Identification of High Potential Archers Based on Fitness and Motor Ability Variables: A Support Vector Machine Approach. Human Movement Science, 57. pp. 184-193. ISSN 0167-9457. (Published)

Zahari, Taha and Rabiu Muazu, Musa and M.R., Abdullah and M. H. A., Hassan and M. A. M., Razman and Anwar, P. P. Abdul Majeed (2017) Reliability testing of inertial measurement units in the analysis of physiological variables in archery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 140-141. ISBN 9789670257884

Zahari, Taha and Rabiu Muazu, Musa and Mohamad Razali, Abdullah and Mohd Azrai, Mohd Razman and Chei, Ming Lee and Faeiz Azizi, Adnan and Muhammad Amirul, Abdullah and Haque, Mainul (2017) The Application of Inertial Measurement Units and Wearable Sensors to Measure Selected Physiological Indicators in Archery. Asian Journal of Pharmaceutical Research and Health Care, 9 (2). pp. 85-92. ISSN 2250-1460 . (Published)

Zahari, Taha and Raja Ariffin, Raja Ghazilla and Sumiani, Yusoff and Salwa Hanim, Abdul-Rashid (2014) Development of Decision Support System for Fastener Selection in Product Recovery Oriented Design. The International Journal of Advanced Manufacturing Technology, 70 (5-8). pp. 1403-1413. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zahari, Taha and Rossi, Passarella and Sugiyono, . and Nasrudin, Abd Rahim and Jamali, M. Sah and Aznijar, Ahmad Yazid (2011) CFD analysis for merdeka 2 solar vehicle. Advanced Science Letters, 4 (8-10). pp. 2807-2811. ISSN 1936-6612. (Published)

Zahari, Taha and Sakundarini, Novita and Salwa Hanim, Abdul-Rashid and Raja Ariffin, Raja Ghazilla (2014) Incorporation of High Recyclability Material Selection in Computer Aided Design. Materials and Design, 56. pp. 740-749. ISSN 0261-3069. (Published)

Zahari, Taha and Salaam, H. A. and Phoon, Sin Ye and T. M. Y. S., Tuan Ya and Mohd Razali, Mohamad (2015) Application of integrated sustainability assessment: Case study of a screw design. International Journal of Industrial Engineering, 22 (1). pp. 1-10. ISSN 1943-670X. (Published)

Zahari, Taha and Samrat, Nahidul Hoque and Norhafizan, Ahmad and Choudhury, Ahmed Imtiaz (2014) Modeling, Control, and Simulation of Battery Storage Photovoltaic-Wave Energy Hybrid Renewable Power Generation Systems for Island Electrification in Malaysia. The Scientific World Journal, 2014. pp. 1-21. ISSN 2356-6140 (print); 1537-744X (online). (Published)

Zahari, Taha and Sarkawt, Rostam (2012) A hybrid fuzzy AHP-PROMETHEE decision support system for machine tool selection in flexible manufacturing cell. Journal of Intelligent Manufacturing, 23 (6). pp. 2137-2149. ISSN 1572-8145. (Published)

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md Dawal (2012) Color preference of the Malay population in the design of a virtual environment. In: IEEE 18th International Conference on Virtual Systems and Multimedia: Virtual Systems in the Information Society (VSMM 2012) , 2-5 September 2012 , Milan, Italy. pp. 545-548.. ISBN 978-1-4673-2564-6

Zahari, Taha and Sugiyono, . and T. M. Y. S., Tuan Ya and Sawada, Tatsuo (2011) Numerical investigation on the performance of Wells turbine with non-uniform tip clearance for wave energy conversion. Applied Ocean Research, 33 (4). pp. 33-4. ISSN 0141-1187. (Published)

Zahari, Taha and Tai, Vin Cent and See, Phen Chiak (2011) Design and manufacture of a miniature UAV using 3D rapid prototyping. Advanced Materials Research, 308-310. pp. 1426-1435. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zahari, Taha and Teuku, Firsa and Raja Ariffin, Raja Ghazilla (2014) AVL Boost Simulation of Engine Performance and Emission for Compressed Natural Gas Direct Injection Engine. Journal of Energy & Environment, 6 (1). pp. 1-3. ISSN 1985-7462. (Published)

Zahari, Taha and Yusof, Hashim (2016) Modelling of Ergonomic Risks Factors as predictors to work related fatigue near miss accidents experienced among Malaysian express bus drivers: Partial Least Squares (PLS) Approach. In: 17th Asia Pacific Industrial Engineering and Management Systems (APIEMS 2016) Conference , 7-10 December 2016 , Taipei, Taiwan. pp. 1-8..

Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

This list was generated on Fri Mar 29 23:33:54 2024 +08.