UMP Institutional Repository

Items where Subject is "T Technology > TH Building construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: A | B | C | E | F | H | I | J | K | L | M | N | P | R | S | T | U | W | Y | Z
Number of items at this level: 340.

A

A. F., Salmanfarsi and Haryati, Awang and Mohamad Idris, Ali (2019) A review on the development of rock slope stability assessment in Malaysia. In: IOP Conference Series: Earth and Environmental Science, International Conference on Agricultural Technology, Engineering and Environmental Sciences, 21-22 August 2019, , Banda Aceh, Indonesia. pp. 1-8., 365 (012063). ISSN 1755-1315

A. L., Amminudin and Putra Jaya, Ramadhansyah and Doh, Shu Ing and S. A., Mangi and W. I., Mohd Haziman (2019) Effect of dried sewage sludge on compressive strength of concrete. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 297-303..

A. S., Bawono and Mohamad Idris, Ali and S., Kusumadew and Noram Irwan, Ramli (2019) Methodological study to classification of damage state immediately subsequent to the Banjarnegara Indonesia earthquake on 2018. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 221-226..

Abdul Rahim, A. H. and Ridzuan, Azhari and Rozana, Zakaria and Eeydzah, Aminudin and Putra Jaya, Ramadhansyah and Logeswaran, Nagarajan and Khairulzan, Yahya and Zaiton, Haron and Riduan, Yunus (2019) Causes of crane accidents at construction sites in Malaysia. In: IOP Conference Series: Earth and Environmental Science, The 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 August 2018 , Johor, Malaysia. pp. 1-11., 220 (012028). ISSN 1755-1315

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. (2019) Enhancing the non-technological skills required for effective building information modeling through problem-based learning. Journal of Information Technology in Construction, 24. pp. 154-166. ISSN 1874-4753

Abdul Rahimi, Abdul Rahman and Ayer, Steven K. and London, Jeremi S. (2019) Applying problem-based learning in a building information modeling course. International Journal of Engineering Education, 35 (3). pp. 956-967. ISSN 0949-149X

Adam Zakwan, Zainuddin (2015) Application of drone in visual inspection for construction project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Adeleke, A. Q. and Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Lee, Chia Kuang (2019) Project management performance and its influence on Malaysian building projects. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 313-329., 2019. ISSN 2518-668X

Adibah, Danh Sapry (2017) Factors hindering the implementation of augmented reality (AR) in Malaysian construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Aiman Ariff, Ahmad Zamri (2019) Predicament in construction – an overlook to delays, cost overruns and risks. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2019) Contractual issues for building information modelling (BIM)-based construction projects: An exploratory case study. In: IOP Conference Series: Materials Science and Engineering, 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 November 2018 , Langkawi, Malaysia. pp. 1-9., 513 (012035). ISSN 1757-8981 (Print), 1757-899X (Online)

Ahmad Huzaimi, Abd Jamil and Mohamad Syazli, Fathi (2020) Enhancing BIM-based information interoperability: Dispute resolution from legal and contractual perspectives. Journal of Construction Engineering and Management, 146 (7). pp. 1-22. ISSN 0733-9364

Ahmad Syafiq, Shiro (2009) Small sweep. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Tarmizi, Haron and A., Marshall-Ponting and Mohd Nasrun, Mohd Nawi and Mohd Harris, Ismail (2014) Building information modelling: A case study approach to identify readiness criteria for process requirement. American-Eurasian Journal of Sustainable Agriculture, 8 (7S2). pp. 85-91. ISSN 1995-0748

Ahmad Tarmizi, Haron and Marshall-Ponting, Amanda J. and Zahrizan, Zakaria and Mohd Nasrun, Mohd Nawi and Zuhairi, Abd Hamid and Kamarul Anuar, Mohamad Kamar (2015) An industrial report on the Malaysian building information modelling (BIM) taskforce: Issues and recommendations. Malaysian Construction Research Journal, 17 (2). pp. 21-36. ISSN 1985-3807 (Print), 2590-4140 (Online)

Ahmad Zakki, Jilan (2015) UMP tawar teknologi bina rumah mangsa banjir. Utusan Malaysia . p. 24.

Aida Shafina, Shofi (2012) Sound identification in the swiftlet house. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ainaa Farhana, Rosli (2015) Acceptance of an innovation toward performance within construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Aizat, Alias and Amin, A. F. M. (2021) Blast loaded steel-concrete composite slab. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). 7874 -7884. ISSN 2231-8380 (online)

Ajibike, W. A. and Adeleke, A. Q. and Fazeeda, Mohamad and M. N. M., Nawi and Bamgbaded, J. A. and S. R. M., Riazi and Md Fauzi, Ahmad (2020) Achieving environmental sustainability in Malaysian construction industry through institutional pressure. Journal of Critical Reviews, 7 (7). pp. 1159-1167. ISSN 2394-5125

Akmalhabibi, Rosli (2013) Condition monitoring of faculty air conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Al-Fasih, Mohammed Yahya Mohammed and Mohd Haziman, Wan Ibrahim and Nurul Fasihah, Basirun and Putra Jaya, Ramadhansyah and Mohd Syahrul Hisyam, Mohd Sani (2019) Influence of Partial Replacement of Cement and Sand with Coal Bottom Ash on Concrete Properties. International Journal of Recent Technology and Engineering, 8 (3S3). pp. 356-362. ISSN 2277-3878

Al-Mohammad, Mohammad and Omar, Jamaludin (2018) A review of causes of delay in construction projects. International Journal of Engineering & Technology, 7 (4). pp. 5078-5083. ISSN 2227-524X

Amin Ridzuan, Ishak (2018) 'Kilang' dalam kampus di UMP. Berita Harian . p. 422.

Amin Ridzuan, Ishak (2015) UMP bina rumah kabin. Berita Harian .

Anis Farhana, Mazlan (2019) Seismic design for reinforced concrete hospital building influenced by soil type and grade of concrete. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) Advancing Towards Delay-Free Construction Project: A Review. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, 23-25 September 2016 , Detroit, Michigan, USA. pp. 744-751.. ISBN 978-0-9855497-5-6

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) Assessment of Environmental Risks in Construction Projects: A Case of Malaysia. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, 23-25 September 2016 , Detroit, Michigan, USA. pp. 752-763.. ISBN 978-0-9855497-5-6

Ansah, Richard Hannis and Sorooshian, Shahryar and Shariman, Mustafa and Duvvuru, Gomanth (2016) An Environmental Impact Framework for Evaluating Construction Projects Delays. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, 23-25 September 2016 , Detroit, Michigan, USA. pp. 764-772.. ISBN 978-0-9855497-5-6

Ansha, Richard Hannis (2016) Adoption of lean tools to control delays in Malaysian construction projects. Masters thesis, Universiti Malaysia Pahang.

Arivahnathan, Pandiyan (2014) Factors affecting the performance of Klang Valley mass rapid transit project-study on improving the project performance. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azizuddin, Abd Aziz (2014) Air-conditioning system with simultaneous control of sensible and latent heat for building energy conservation in Malaysia. PhD thesis, Kyushu University.

Azlina, Nordin (2019) Seismic design for reinforced concrete office building influenced by concrete grade and level of seismicity. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azmeen Aida, Azizul Hamid (2010) A study of internal lighting comfortability at lecture room. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Azri Nurfathiah, Mustafa (2019) Investigation on the causes and method in minimizing the building defects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

B

B., Setiawan and T., Saidi and A., Yuliannur and U., Polom and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2020) Ambient noise analysis for characterizing sub-surface dynamic parameters. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 712 (012012). ISSN 1757-8981 (Print), 1757-899X (Online)

Bamgbaded, J. A. and Salimon, Maruf Gbadebo and Adeleke, A. Q. and Nasidi, Y. (2019) Contractor’s technology acceptance for firm sustainability performance. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1084-1101., 2019. ISSN 2518-668X

Beng, Wei Chong and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Xiaofeng, Li and Mohd Haziman, Wan Ibrahim and Mohd Mustafa Al Bakri, Abdullah and Sandu, Andrei Victor and Płoszaj, Bartosz and Szmidla, Janusz and Stachowiak, Tomasz (2021) Image Analysis of Surface Porosity Mortar Containing Processed Spent Bleaching Earth. Materials, 14 (7). pp. 1-16. ISSN 1996-1944

Beng, Wei Chong and Rokiah, Othman and Putra Jaya, Ramadhansyah and Xiaofeng, Li and Mohd Rosli, Mohd Hasan and Mohd Mustafa Al Bakri, Abdullah (2021) Meta-analysis of studies on eggshell concrete using mixed regression and response surface methodology. Journal of King Saud University - Engineering Sciences. pp. 1-20. ISSN 1018-3639 (In Press)

C

Chang, Ting Wai (2014) A study on the implementation of relationship management (supply chain management) in Malaysia construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Che Amri, Che Azmi (2012) Compressed concrete block using crushed laterite brick as sand substitution. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Cheng, Hock Tian (2011) Engineering Properties of Epoxy Polymer Cement Concrete Reinforced with Glass Fibers. Journal of Engineering and Applied Sciences, 6 (3). pp. 191-199. ISSN 1816-949X

Cheng, Hock Tian and Bashar, S. Mohammed and Kamal Nasharuddin, Mustapha (2009) Interaction diagram and response surface plot of pretensioned inverted T-beam with circular web openings. International Journal of Modelling, Identification and Control (IJMIC), 7 (2). pp. 209-218. ISSN 1746-6172

Cheng, Hock Tian and Bashar, S. Mohammed and Kamal Nasharuddin, Mustapha (2009) Interaction diagram in finite element analysis of deflection of pretensioned inverted T-Beam with web openings strengthened with GFRP laminates. In: IEEE 2nd International Conference on Information and Computing Science (ICIC 2009), 21-22 May 2009 , Manchester, United Kingdom. pp. 335-338., 1 (5169609). ISSN 2160-7443 (print), 2160-7451 (online) ISBN 9780769536347

Cheng, Hock Tian and Bashar S., Mohammed and Kamal Nasharuddin, Mustapha (2009) Finite element analysis and structural design of pretensioned inverted T-beams with web openings. Frontiers of Architecture and Civil Engineering in China, 3 (2). pp. 148-157. ISSN 1673-7407

Cheng, Hock Tian and Mohammed, Bashar S. and Kamal Nasharuddin, Mustapha (2009) Experimental and analytical analysis of pretensioned inverted T-beam with circular web openings. International Journal of Mechanics and Materials in Design, 5 (2). pp. 203-215. ISSN 1569-1713

Chin, Siew Choo and Doh, Shu Ing and Jolius, Gimbun and Siregar, J. P. and Foo, S. Tong and Huey, R. Ong (2018) Strengthening performance of PALF-epoxy composite plate on reinforced concrete beams. In: IOP Conference Series: Materials Science and Engineering, MUCET 2017, 6-7, December 2017 , Batu Feringgi, Penang. pp. 1-8., 318 (1). ISSN 1757-899X (online)

Chin, Siew Choo and Tong, F. S. and Doh, Shu Ing and Lim, Kar Sing and Jolius, Gimbun (2020) Effect of soil burial on mechanical properties of bamboo fiber reinforced epoxy composites. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress, 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (052016). ISSN 1757-899X

Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng and Noram Irwan, Ramli (2021) Properties of concrete with eggshell powder and tyre rubber crumb. Key Engineering Materials, 879. pp. 34-48. ISSN 1013-9826 (print); 1662-9795 (online)

Chong, Beng Wei and Rokiah, Othman and Tan, Wei Sheng and Putra Jaya, Ramadhansyah and Mohd Mustafa Al Bakri, Abdullah (2021) Properties of mortar with waste tyre rubber as partial sand replacement. Key Engineering Materials, 879. pp. 49-61. ISSN 1013-9826 (print); 1662-9795 (online)

E

Engku Mohd Amri, Engku Ariff (2007) Autonomous lighting and security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

F

Farah Aqila, Tun Riduan (2017) Effect of storey height on seismic performance of elevated reinforced concrete water tank. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farah Salwati, Ibrahim and Nur Diyana, Shariff and Muneera, Isa and Abdul Rahimi, Abdul Rahman (2019) The barriers factors and driving forces for BIM implementation in Malaysian AEC companies. Journal of Advanced Research in Dynamical and Control Systems, 11 (8 special). pp. 275-281. ISSN 1943-023X

Farashaheeda, Ahmad Jani (2018) Seismic design for reinforced concrete hospital building influenced by level of peak ground acceleration and class of ductility. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Farid Izamer, Azizan (2017) Study on maintenance management practice of telecommunication tower through strategic planning in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fathin Nur Ammalina, Norhasim (2018) Finite element analysis of office building steel structure by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Fatin Fazlinda, Hamzah (2016) A study on the factor effecting project delay in the housing construction. Faculty of Industrial Management, Universiti Malaysia Pahang.

Foo, Sheng Tong and Siew, Choo Chin and Mohd Tamizi, Mustafa and Huei, Ruey Ong and Khan, Maksudur R. and Jolius, Gimbun and Doh, Shu Ing (2018) Influence of alkali treatment on physico-chemical properties of Malaysian bamboo fiber: A preliminary study = Pengaruh rawatan alkali terhadap sifat-sifat fizikal-kimia serat buluh Malaysia: satu kajian awal. Malaysian Journal of Analytical Sciences, 22 (1). pp. 143-150. ISSN 1394-2506

H

H., Yunita and N., Al Huda and T., Saidi and A., Yuliannur and B., Setiawan and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2020) Site-specific ground response analysis at a site in the affected area of the 2016 Pidie Jaya earthquake. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 712 (012013). ISSN 1757-8981 (Print), 1757-899X (Online)

Hamada, Hussein M. and Ahmad Tarmizi, Haron and Zahrizan, Zakaria and Humada, Ali M. (2016) Challenges and Obstacles of Adoption BIM Technology in the Construction Industry in Iraq. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 43-48..

Hamada, Hussein M. and Ahmad Tarmizi, Haron and Zahrizan, Zakaria and Humada, Ali Mahmood (2017) Implementation of 4D/BIM in the Iraqi construction industry. International Journal of Engineering Systems Modelling and Simulation, 9 (4). pp. 227-236. ISSN 1755-9758

Hamada, Hussein M. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Humada, Ali Mahmood (2019) Effect of incorporation POFA in cement mortar and desired benefits: a review. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-11., 365 (012060). ISSN 1755-1307 (Print); 1755-1315 (Online)

Hamada, Hussein M. and Thomas, Blessen Skariah and Tayeh, Bassam A. and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Yang, Jian (2020) Use of oil palm shell as an aggregate in cement concrete: a review. Construction and Building Materials, 265 (120357). pp. 1-16. ISSN 0950-0618

Hamid, N. H. and Azmi, I. F. and Haryati, Awang (2019) Seismic response of precast and IBS buildings under earthquake attacks. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. , 365 (1). ISSN 1755-1307

Hamid, N. H. and Azmi, I. F. and Tiong, P. L. Y. and Haryati, Awang (2019) Special based isolation system for low-rise RC building. In: International Conference on Agricultural Technology, Engineering and Environmental Sciences, ICATES 2019, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-8., 365 (1). ISSN 1755-1307

Hamizah, Jasmi (2010) Determination of direction factor, Md for MS1553:2002 wind loading for building structure. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Hammood, Rasheed Abed and Sharifah Maszura, Syed Mohsin (2019) Effect use of steel fiber on mechanical properties of concrete mixture. In: IOP Conference Series: Earth and Environmental Science, International Conference on Agricultural Technology, Engineering and Environmental Sciences, 21-22 August 2019 , Banda Aceh, Indonesia. pp. 1-9., 365 (012061). ISSN 1755-1307

Hanis Athirah, Roslan (2019) Effect of soil type and level of seismicity on seismic design of reinforced concrete school building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Harrison Yan, Rolland Duat (2014) Causes of time delay in construction Sarawak, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hassan, Ahmed Khalif and Adeleke, A. Q. and Taofeeq, D. M. (2019) The Effects of Project Triple Constraint on Malaysia Building Projects. Social Science and Humanities Journal, 3 (5). pp. 1222-1238. ISSN 2456-2653

Hazim Adly Harun, Harun (2015) Case study on delay factors in steel bridge construction. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Hazwani, Harif (2012) Impact of poor management in construction. Faculty of Civil Engineering, Universiti Malaysia Pahang.

Hemaambiegey, Gunasekgerin (2014) Proposal for an effective bus stop design at Hentian Bandar of Rapid Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

I

Intan Diana, Musa (2012) The causes and effect of delay in construction industry project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Izyana Jannati, Sabri (2019) Study on factors that lead to the abandoned building project in Borneo (Sabah & Sarawak). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

J

Jokhio, Gul A. and Hamada, Hussein M. and Humada, Ali M. and Gul, Yasmeen and Abu-Tair, Abid (2020) Environmental benefits of incorporating palm oil fuel ash in cement concrete and cement mortar. In: E3S Web of Conferences; 7th International Conference on Environment Pollution and Prevention, ICEPP 2019, 18 - 20 December 2019 , Melbourne, Australia. pp. 1-6., 158 (3005). ISSN 2555-0403

Juliana, Junaidi (2016) Solid waste management in building construction site. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

K

Khairil Azman, Masri and Ahmad Kamil, Arshad and Putra Jaya, Ramadhansyah and Haryati, Awang and Mohamad Idris, Ali and Ekarizan, Shaffie and Juraidah, A. and Youventharan, Duraisamy (2019) Performance of nanosilica as modified binder to improve rutting and fatigue resistance. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019), 30-31 October 2019 , Putrajaya International Convention Centre (PICC) Putrajaya, Malaysia. pp. 1-4.. (Unpublished)

Khairul Anuar, Shahid and Bunnori, N. Muhammad and Megat Johari, M. A. and Hassan, M. H. and Sani, Ashiru (2020) Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques. Construction and Building Materials, 233 (117291). pp. 1-13. ISSN 0950-0618

Khairul Anuar, Shahid and Khairunisa, Muthusamy and Norhaiza, Ghazali (2021) Compressive strength of concrete containing laterite stone and palm oil clinker as fine aggregate replacement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , Putrajaya, Malaysia. pp. 1-11., 682 (1). ISSN 1755-1307

Khairul Faiq, Selaiman (2006) Case study : demolition practice of old MARA building on Lot 1767, Lot 1218 and Pt 4, Section 46, mukim Bandar Kuala Lumpur, Jalan Tuanku Abdul Rahman. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Khairun Nisa, Affandi (2014) A comparative study of BIM and CAD (architecture). Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khairunisa, Muthusamy and Budiea, Ahmed Mokhtar Albshir and Ahmad Lutfi Fajri, Zaidan and Mohd Hafizuddin, Rasid and Dayang Siti, Hazimmah (2017) Properties of Concrete Containing Foamed Concrete Block Waste as Fine Aggregate Replacement. In: IOP Conference Series: Materials Science and Engineering, Global Congress on Construction, Material and Structural Engineering 2017 (GCoMSE2017), 28-29 August 2017 , Johor Bahru, Malaysia. pp. 1-6., 271 (012084). ISSN 1757-899X

Khairunisa, Muthusamy and Mohamad Hafizuddin, Rasid and Jokhio, Gul Ahmed and Budiea, Ahmed Mokhtar Albshir and Mohd Warid, Hussin and Mirza, Jahangir (2020) Coal bottom ash as sand replacement in concrete: a review. Construction and Building Materials, 236 (117507). pp. 1-12. ISSN 0950-0618

Kusbiantoro, Andri and Mohd Sobri, Ibrahim and Khairunisa, Muthusamy and Aizat, Alias (2012) Development of Sucrose and Citric Acid as the Natural Based Admixture for Fly Ash Based Geopolymer. In: The 3rd International Conference on Sustainable Future for Human Security, 3 - 5 October 2012 , Kyoto University, Japan. .

Kusbiantoro, Andri and Muhd Fadhil, Nuruddin and Nasir, Shafiq and Sobia, Anwar Qazi (2012) The Effect of Microwave Incinerated Rice Husk Ash on the Compressive and Bond Strength of Fly Ash Based Geopolymer Concrete. Construction and Building Materials, 36. pp. 695-703. ISSN 0950-0618

L

Lam, Cheng Yong (2019) Finite element analysis of steel frame for high rise building structure using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lau, Zi Thiam (2014) A study on the implementation of safety practices in Malaysia construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Laupa, Junus (2014) Bangunkan kabin mesra alam. Utusan Malaysia .

Laupa, Junus and Ashriq Fahmy, Ahmad (2014) Bata hijau mesra alam.

Lee, Chia Kuang and Hasahudin, Hassan and Nurhaizan, Mohd Zainudin (2010) Towards Zero Accidents In Construction Projects : Promoting Hirarc As An Effective Tools To Reduce Accidents. In: 3rd International Graduate Conference On Engineering, Sciences & Humanities (IGCESH 2010), 02-04 November 2010 , Universiti Teknologi Malaysia Johor Bahru, Johor. pp. 1-3..

Lee, Chia Kuang and Lee, Mei Sin and Thurasamy, Ramayah (2020) Using mediation in project disputes based on theory of planned behavior and technology acceptance model. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 12 (1). ISSN 1943-4162

Lee, Chia Kuang and Yusmin, Jaafar (2013) Prioritization of Factors Influencing Safety Performance on Construction Sites: A Study Based on Grade Seven (G7) Main Contractors' Perspectives. In: International Proceedings of Economics Development and Research: International Conference on Business, Management and Governance (ICBMG2012), 29-30 December 2012 , Hong Kong. pp. 6-12., 57. ISSN 2010-4626

Lee, Wah Peng and Toh, Tien Choon and Lew, Yoke Lian and Khor, Sin Huai and Goh, Kai Chen and Gui, Hun Chuen and Zainordin, Nadzirah and Lee, Chia Kuang (2020) Capacity building needs of small and medium contracting enterprises in Klang Valley Malaysia. International Journal of Industrial Management (IJIM), 6 (1). pp. 17-27. ISSN 2289-9286 (Print); 0127-564x (Online)

Lee, Z. P. and A. R., Rahimi and Doh, Shu Ing (2020) Key drivers for adopting design build: A comparative study between project stakeholders. Physics and Chemistry of the Earth, Parts A/B/C (102945). ISSN 1474-7065 (In Press)

Lee, Z. P. and A. R., Rahimi and Doh, Shu Ing (2020) Success factors of design-build public sector projects in Malaysia. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 712 (012045). ISSN 1757-899X

Leong, Kah En (2019) Effect of defect width upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Leong, Kuan Yoke (2014) Design coordination in design development using building information modeling. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Li, X. F. and Doh, Shu Ing and Putra Jaya, Ramadhansyah and M. R., Hainin and W. I., Mohd Haziman (2021) Effect of eggshell powder on the mechanical and durability properties of cement mortar. Lecture Notes in Civil Engineering, 157. pp. 153-163. ISSN 2366-2557

Liew, Mun Kai (2018) Performance of bubble deck slab. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Kah Qi (2019) Effect of defect length upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lim, Yee Siang (2019) Finite analysis of steel frame multi-storey building by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loh, Mei Yee (2014) Challanges of building information modelling (BIM) in project implementation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Loo, Kian Loon (2017) Finite element analysis of concrete deep beams with various locations of opening and reinforcement arrangements. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lung, C. K. and M. R., Mohd Hasan and M. O., Hamzah and A., Sani and S., Poovaneshvaran and Putra Jaya, Ramadhansyah (2020) Effect of temperatures and loading rates on direct shear strength of asphaltic concrete using layer-parallel direct shear test. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 712 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

Lyntia, Ping Jawa (2012) A study on solid waste generation and composition from commercial sources (case study: Taman Tas Kuantan). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

M

M., Lutfi and H., Arien and M., Hendrawati and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli (2020) Assessment of safety performance level on simple urban residential building: Case study at Bogor City Indonesia. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 712 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

M. A., Faten Albtoush and S. I., Doh (2019) Factors effecting the cost management in construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 173-178..

M. H. A., Rasid and M. S. M., Sani (2014) Experimental study on noise mapping of split unit air conditioner system. Auto Inexss (8). ISSN 1985-8434

Mahendran, Moorthy (2010) Performance of solar air-conditioning system using heat pipe evacuated tube collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahmoodian, Reza and Hamdi, M. and Hassan, M. A. and Akbari, Abolghasem (2015) Mechanical and Chemical Characterization of a TiC/C System Synthesized Using a Focus Plasma Arc. PLoS ONE, 10 (6). pp. 1-10. ISSN 1932-6203

Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Mohd Baharudin, Ridzuan and Burhanudin, M. K. and Norwati, Jamaluddin and Kok, Hui Li and Shahiron, Shahidan and Faisal, Sheikh Khalid and Mohd Fadzil, Arshad and Putra Jaya, Ramadhansyah (2018) Compressive and flexural strength of concrete containing palm oil biomass clinker with hooked-end steel fibers. International Journal of Integrated Engineering, 10 (9). pp. 152-157. ISSN 2229-838X (Print); 2600-7916 (Online)

Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Mohd Fadzil, Arshad and Memon, Fareed Ahmed and Putra Jaya, Ramadhansyah and Shahiron, Shahidan (2018) A review on potential use of coal bottom ash as a supplementary cementing material in sustainable concrete construction. International Journal of Integrated Engineering, 10 (9). pp. 127-135. ISSN 2229-838X (Print); 2600-7916 (Online)

Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Mohd Fadzil, Arshad and Putra Jaya, Ramadhansyah (2018) Short-term effects of sulphate and chloride on the concrete containing coal bottom ash as supplementary cementitious material. International Journal of Engineering Science and Technology. pp. 1-8. ISSN 2215-0986 (In Press)

Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Shahiron, Shahidan and Mohd Fadzil, Arshad and Memon, Sheeraz Ahmed and Putra Jaya, Ramadhansyah and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2018) Influence of Ground Coal Bottom Ash on the Properties of Concrete. International Journal of Sustainable Construction Engineering and Technology, 9 (2). pp. 26-34. ISSN 2180-3242

Mangi, Sajjad Ali and Wan Ibrahim, M. H. and Jamaluddin, N. and Arshad, M. F. and Putra Jaya, Ramadhansyah (2019) Effects of ground coal bottom Ash on the properties of concrete. Journal of Engineering Science and Technology, 14 (1). pp. 338-350. ISSN 1823-4690

Marshiela, Maedika (2014) The effect of wind force on metal deck roof joint. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Marziatulhikmah, Maslan (2010) Assessment of building structure opening for dwelling. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Mazlan, Abu Seman and Yuantian, Feng and Z. M., Jaini (2013) Computational modelling of reinforced concrete wall subjected to transformer tank rupture. In: Research and Applications in Structural Engineering, Mechanics and Computation. CSC Press, pp. 1-5.

Md Khusairi, Baharun (2012) The study local level supply in Malaysia construction industry : strategies in improvement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Meor Airol Shafiq, Meor Shamsuddin (2012) Cost effective comparison between concrete and steel composite structure for 2 storeys building. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Nadzif, Zahirudin (2009) Performance evaluation of Proton Waja car air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohamad Shariff, Ramli (2012) Waste minimization by recycling construction waste. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohammad Affendy, Omardin (2016) Pembinaan Infrastuktur Lebih Kreatif. CREATE . pp. 100-101. ISSN 1823-7487

Mohammad Affendy, Omardin (2013) Penjenamaan semula tenaga mahir selenggara bangunan. Berita Harian, (22 Fe . p. 31.

Mohammad Affendy, Omardin The Traditional Malay House. Pekan Review, 4 . pp. 48-49. ISSN 2180-3099

Mohammad Affendy, Omardin and Yao, Liu and Diyana, Kamarudin (2017) In-house green knowledge practice for hospital building maintenance. Journal of Information System and Technology Management, 2 (6). pp. 62-72. ISSN 0128-1666

Mohammad Fazriel, Zaidi (2019) Numerical analysis of blast pressure parameters on RC wall with circle opening. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohammad Solhi, Mohammed (2010) The analysis of factors contributed to delay and method to analyze the delay in construction project. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohammed Hesham Ali, Hammam (2019) Effects of specimen size and shape on compressive strength of foamed concrete containing spent bleaching earth and kenaf fiber. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Afnan, Abdullah (2006) Work process in building construction : a case study of Kelantan Trade Center (KTC). Faculty of Civil and Environmental Engineering, Kolej Universiti Kejuruteraan dan Teknologi Malaysia.

Mohd Hafis, Othman (2010) A study on problems of bumiputera contractor in construction industry. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Harisuddin, Hasnan (2018) A study on the design changes affecting the construction project: point of view from contractor perspective. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Harris, . and Adi Irfan, Che Ani and Ahmad Tarmizi, Haron and Afifudin Husairi, Husain (2014) The way forward for Building Information Modelling (BIM) for contractors in Malaysia. Malaysian Construction Research Journal, 15 (2). pp. 1-9. ISSN 1985-3807

Mohd Haziman, Wan Ibrahim and Shahiron, Shahidan and Algaif, Hassan Amer and Ahmad Farhan, Hamzah and Putra Jaya, Ramadhansyah (2021) Properties of Self-Compacting Concrete with Coal Bottom Ash Under Aggressive Environments. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore. ISBN 978-981-16-2395-0

Mohd Hilmi, Tajud Hassan (2009) Design an air conditioning system for UMP mosque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Illahi, Mohd Ashri (2010) Study of safety management & professional to achive zero accidents in construction site. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Mohd Iskandar Zulkarnain, Talib (2010) Cost control in construction project of the site. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Izuan, Abu Samah (2012) A study on compressive strength and water absorption in cement brick using RHA as part of sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Johari, Othman (2006) Planning & scheduling by using Microsoft Project a case study of "suggestion for construction and completion the Science Department for University Islam Antarabangsa Malaysia, Bandar Indera Mahkota, Kuantan, Pahang". Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Mohd Khalild, Abdul Kadir (2006) Construction planning and scheduling a case study of "Cadangan membina dan menyiapkan Kulliyyah Sains untuk Universiti Islam Antarabangsa Malaysia. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Mohd Nor Idrus, Mat Shariff (2008) Automatic air conditioning control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nurarif, Zulhemay (2012) Review the implementation waste management practices in construction work around Taman Indera Sempurna, Pekan-Kuantan, Pahang Darul Makmur. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Rosazuwad, Mohamad@Muda (2010) The factors and effect of delay in government construction project (case study in Kuantan). Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Mohd Syazwan Nizam, Mohd Moni (2012) The implementation of industrialised building system in construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Tarmizi, Abd Aziz (2007) Development of automatic gate opener mechanism. Faculty of Mechanical E1ngineering, University Malaysia Pahang.

Mohd Yuhyi, Mohd Tadza (2016) Industry Centre of Excellence (ICOE): Graduate Employability through BIM Initiatives. In: Seminar on Building Information Modeling (BIM) Initiative In 11th Malaysian Plan, 5 April 2016 , MDec, Cyberjaya. pp. 1-20.. (Unpublished)

Mohd Zamri, Mohd Kama (2012) A study of humidity effect toward the quality of air from air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd. Aizad, Johari (2013) Application of industrialised building system in school project in Malaysia: the challenge. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhaiza , Awang (2015) Building information modelling creating customized wall family liblary using revit 2014. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Abdul Hadi, Ahmad Sabri (2019) Problem facing by private developer involving abandoned projects in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Khumaini, Kuzaiman (2008) Analyze the sprinkler system in UMP lecture room using CFD (Computational Fluid Dynamics) analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Samrie, Sakkaran (2019) Study on economics of abandoned building in peninsular Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Adib Azri, Mohamad Nasaruddin (2019) An experimental study of the structural capacity of rectangular concrete beam with rice husk concrete (RHC) under flexural test- 5% and 15% rice husk replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Fadhli, Othman (2012) Design and fabricate gas stove stand and extractor hood stand. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Fakhri, Mad Din (2019) Issue in building construction due to quality control and quality assurance in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Farhan, Zolkepli and Mohd Fakhrurrazi, Ishak (2017) Exploration of Methods for Slope Stabilization Influence by Unsaturated Soil. Malaysian Journal of Civil Engineering, 29 (2). pp. 121-131. ISSN 1823-7843

Muhammad Hafiz, Abdul Latip (2008) Design and fabrication of portable kitchen for outdoor use. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hanif, Abd Rasid (2008) Noise source identification of split unit air conditioner system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hasnun Hasib, Mohd Ariffin (2019) Seismic performance of cantilever retaining wall under different earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Khairul Anuar, Isa (2019) Challenge of building information modelling (BIM) implementation in Malaysia AEC industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Muslim , Ramle (2012) Efficiency in construction process. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Nazrin Akmal, Ahmad Zawawi and Khairunisa, Muthusamy and Fadzil, Mat Yahaya and Mohd Hanafi, Hashim and Nur Azzimah, Zamri (2017) Utilization of fly ash as partial sand replacement in oil palm shell lightweight aggregate concrete. In: IOP Conference Series: Materials Science and Engineering, Global Congress on Construction, Material and Structural Engineering 2017 (GCoMSE2017), 28-29 August 2017 , Johor Bahru, Malaysia. pp. 1-6., 271 (012003). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Shahmi , Mat Saat (2011) A study on domestic subcontractor in Kota Bharu : critical analysis of construction management in handling local project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Syaiful Safwan , Nordin (2015) Materials takeoff in building information modeling. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Zul Hazmi, Mansor (2019) An experimental study of the structural capacity of rectangular beam under flexural test – rice husk concrte (0%, 10% & 12% replacement). Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muzamir, Hasan and Wei, O. C. and Ler, L. Y. and Pahrol, F. -H and Hyodo, M. (2020) The shear strength of soft clay reinforced with single and group crushed brick column. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress 2019, ESChE 2019, 17 - 19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 736 (5). ISSN 1757-8981 (Print), 1757-899X (Online)

N

N. F. D., Razak and M. S. M., Sani and Azmi, W. H. and Zhang, B. (2017) Noise and vibration analysis for automotive radiator cooling fan. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1-2 Aug. 2017 , Swiss Garden Hotel and Spa, Kuantan, Pahang. pp. 1-9., 257 (1). ISSN 17578981

N. H. A., Khalid and N. N. A., Rasid and A. R., Mohd.Sam and N. H. A. S., Lim and M., Ismail and L., Zardasti and A., Mohamed and Z. A., Majid and Nur Farhayu, Ariffin (2018) Characterization of palm oil fuel ash and eggshell powder as partial cement replacement in concrete. In: IOP Conference Series: Materials Science and Engineering; 14th International Conference on Concrete Engineering and Technology, CONCET 2018, 8 - 9 August 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 431 (3). ISSN 1757-8981 (Print), 1757-899X (Online)

N.S.A, Samsudin and Adeleke, A. Q. and Ajibike, W. A. (2020) Effects Of Contractors’ Delay Factors On Building Project Performance Among Kuantan Malaysian Construction Industry. Social Science and Humanities Journal, 4 (1). pp. 1705-1715. ISSN 2456-2653

Nadia Faira , Mat Zali (2010) Force pattern in roofing system due to wind load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nadia Izaty, Baharuddin (2015) Communication tools and issues among the construction project team. Faculty of Industrial Technology Management, Universiti Malaysia Pahang.

Nasir, Shafiq and Chin, Siew Choo and Mohd Hasnain, Isa (2018) Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. Construction and Building Materials, 187. pp. 178-184. ISSN 0950-0618

Nasly, Mohamed Ali and Abu Azam, Md Yassin and Norhaiza, Nordin and Khairunisa, Muthusamy (2011) Sustainable Housing Using An Innovative Mortarless Interlocking Blockwork System – The Effect Of Palm Oil Fly Ash (Pofa) As An Aggregate Replacement. In: International Building & Infrastructure Technology Conference 2011, 7-8 Jun 2011 , Penang, Malaysia. pp. 73-81..

Nasly, Mohamed Ali and Abu Azam, Md Yassin and Zahrizan, Zakaria and Khairunisa, Muthusamy (2010) Compressed Stabilised Earth as Load Bearing Interlocking Block. International Journal of Civil Engineering and Geo-Environmental, 1 (1). pp. 1-9. ISSN 21802742

Ng, Soo Nee @ Kerry Ng (2010) Level of awareness for wind flow assessment in urban development (Malaysia). Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Nik Alia Haifaa , Nik Adik (2014) A study on impact of employee training on project performance in construction industry in Kota Bharu, Kelantan. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nik Farahiyah , Nik Mohamed (2014) Cost comparison between the construction of conventional method and interlocking block system. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nik Nur Asyraf, Azhari (2019) Study on perception of BIM effectiveness within construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nik Sukry, Ramli (2014) UMP perkenal bangunan mesra alam. Berita Harian . p. 18.

Nina Nadia, Sahim (2012) A study of performance analysis of fan coil unit system for FKM�s air conditioner. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Azirhan , Sahat (2012) The challenges of green building implementation in Malaysia. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Noor Elinah, Sailin (2018) Impact of the cost overrun factors on the project delays in construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Noor Suraya, Romali (2018) Flood damage and risk assessment for urban area in Segamat. PhD thesis, Universiti Teknologi Malaysia.

Noor Syazwani, Mohd Rizhuan (2019) Delay in design phase in Malaysia construction : the cause and the factor to reduce the delay. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Noor Yuhana, Maamor (2009) Safety aspect in installation industrialized building system (IBS) component. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Noorul Amimah, Ismail (2014) Implementation of industrialised building system (BS) in Malaysia construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Afifah , Zabidi (2012) Building defect investigation and analysis. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Aini , Abdul (2014) Malaysian building information modelling (BIM) implementation roadmap: identifying stakeholders interest. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nor Farahin, Baharudin (2014) Comparative study in construction scheduling by using primavera P6 and microsoft project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Hafizah, Abd Rauf (2012) A study on abnormal pattern recognition using mahalanobis distance for local exhaust ventilation system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Hashimah, Mohd Fuzi (2014) Planning & scheduling for construction project: a case study of duration estimation & influence factors. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nor Laily, Mat Aris (2010) Assessment of skills, knowledge and training for buildings maintenance managers in Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nor Rizman, Abas (2010) Risk assessment for demoliition works in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nor Salwana, Mohammad Idris (2019) Kaloborasi UMP dan CIDB dalam ekosistem Model Informasi Bangunan BIM. UMP News . (Unpublished)

Nor Salwana, Mohammad Idris (2016) UMP guna sisa enap kumbahan hasilkan batu bata S-BRICK. UMP News . (Unpublished)

Nor Zuraiha, Mohd Zaki (2019) Analysis on law issues toward abandoned building housing and project in peninsular, Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norasima, Jamaludin (2010) Critical causes factor of fall accident in construction site. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nordiyana, Ab.llah (2010) The assessment of building defects maintenance in hospital building. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Norhaiza, Ghazali and Khairunisa, Muthusamy and Saffuan, Wan Ahmad (2019) Utilization of fly ash in construction. IOP Conference Series: Materials Science and Engineering, 601 (012023). pp. 1-8.

Norjan, Arasat (2014) Recycled brick masonry aggregate in hollow section beam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Norsyahidatul Nazirah , Ismail (2012) Factors that affect the performance of public project in Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Norsyazwani, Masri (2019) Industrialized building system (IBS) : the problems and strategies to increase the adoption of IBS in Malaysian private sector. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur 'Atiqah, 'Ashri (2018) The development of 3D model building information modelling (BIM) for commercial office building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Afiqah, Awang (2017) A study on the criteria of contractor chosen by client. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Amirah, Mohd Nasai (2017) Effect of soil type on seismic performance of reinforced concrete school building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Azuwa, Ghazali (2017) The causes of delay in construction project in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Darwani, Abd Rahman (2012) Problems of building defects after handing over the key. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Diyana, Md. Kasim (2009) Building defect : case study at Taman Seri Indah , Pulau Pinang. Faculty of Civil Engineering & Earth Resources , Universiti Malysia Pahang.

Nur Farah Huda, Mohd Zaimi @ Mohd Zalmi (2019) Development of guideline for building defects : case study- shopping mall. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Farhayu, Ariffin and Saidah Annisaa, Salam and Adib Danial, Kamaruddin The effect on unfavourable economic conditions in Malaysia to abandoned housing project. International Journal of Recent Technology and Engineering. ISSN 2277-3878

Nur Fathin Nadhirah, Muhd Aliff (2019) The effectiveness of government policies in abandoned building-buyers. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Fatihah, Zakeri (2015) The causes and effect of delay to handover the project in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Nur Fatin Izzati, Yusoff (2019) Identifying the indicators of premature starts in construction projects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Hazwani, Mohd Rashid (2019) Influence of peak ground acceleration and soil type on seismic design of RC hotel bulding. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Iffah Izzati, Aziz (2017) Flexural behaviour of reinforced concrete beam with rectangular web opening. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Shahirah, Abu Hassan Asaari (2018) The impact of weather condition to construction project in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Syafiqah, Abdullah (2019) Numerical analysis of blast pressure parameters on the building with and without wall as a barrier. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Syamimi, Zulkefli and Fatimah, Mahmud and Nurhaizan, Mohd Zainudin (2019) A survey on green supply chain management (GSCM) challenges in the Malaysian construction industry. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1202-1213., 2019. ISSN 2518-668X

Nur Syazana, Jusoh (2018) Assesment of construction planning : maintenance of piping system at Bukit Sekilau Kuantan case study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Zam Zainiena, Zamli (2019) Performance and behavior of concrete elevated water tank under different earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurafiqah, Abu Hasan (2017) Cost overrun of construction project in Pahang : causes and solution. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nuramalina, Nuramalina (2017) Study on the factor that contribute to the financial problems of abandoned housing project in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nuraziemah, Zainal (2016) The earthquake effect of multi-storey building due to surrounding earthquake in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurfarahana, Yaacob (2010) A study of refurbishment of listed buildings into a new facilities. Faculty of Civil Enginering and Earth Resources , Universiti Malaysia Pahang .

Nurhafizah , Nashruddin (2012) Strength analysis of cold-rolled steel roof truss members consist of hat channel and c-channel with different thickness. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurhajar, Abd Rahman (2009) A survey on problem faced by contractors using design and build contract. Faculty of Civil Engineering & Earth Recources, University Malaysia Pahang.

Nurhidayah, Azmy and Ahmad Zairi, Mohd Zain (2016) The Application of Technology in Enhancing Safety and Health Aspects on Malaysian Construction Projects. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7209-7213. ISSN 1819-6608

Nurmalia, Mohd Fakri (2017) Building maintenance management in public school of Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurnajat Nadira, Abdul Rahman (2017) Performance and behavior of storey school bulding reinforced concrete structure under Acheh and Bukit Tinggi earthquake loading. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurshapika Adila, Adnan (2018) Causes and effects of delay in the construction project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Anis , Mazni (2013) A research on critical factors that influence construction productivity related to human power in Gambang and Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Atiqah , Ajis (2012) Study on the improvement code of practices in structural design and material specifications. Faculty of Civil and Environmental Engineering, niversiti Malaysia Pahang.

Nurul Jannah , Aziz (2012) Analysis of risk on construction site. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nurul Nabila, Abdul Latef (2014) The role of consultant in adoption of green building practice in response to climate change. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Shahira, Arbain (2018) Building services in facility management. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurulashikin, Daud (2014) Study on building information modeling (BIM) process flow in construction industry: a model exploratory approach to research. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurulfatiha , Ismail (2013) Linear static analysis of a steel roof truss. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurulzanna, Idris (2014) Process flow for work breakdown structure in plannning and scheduling : a comparative case study. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nuur Husna, Hasnin (2012) A Preliminary Development of Baseline For Normal Condition of Local Exhaust Ventilaton System (Lev)By Using Mahalanobis Distance (Md) Method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

P

P. Z., Razi and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) Incorporation of risk index for risk response and risk mitigation strategies of public-private partnership (PPP) housing construction project in Malaysia. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 213-220..

Phang, Sze Qian (2019) Finite element analysis of reinforced concrete frame by using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Priscilla Serimah, Bundan (2011) The assessment of material application through timber traditional Malay house construction. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Putra Jaya, Ramadhansyah and Che Norazman, Che Wan and Mohd Rosli, Hainin and Muhammad Naqiuddin, Mohd Warid and Mohd Haziman, Wan Ibrahim and Fadzli, Mohamed Nazri and Mohd Fadzil, Arshad (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X (Print); 2600-7916 (Online)

Putra Jaya, Ramadhansyah and Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Mohd Rosli, Mohd Hasan and Sandu, Andrei Victor and Nabiałek, Marcin and Jez, Bartłomiej and Pietrusiewicz, Paweł and Kwiatkowski, Dariusz and Postawa, Przemysław and Mohd Mustafa Al Bakri, Abdullah (2021) Design of experiment on concrete mechanical properties prediction: a critical review. Materials, 14 (8). pp. 1-17. ISSN 1996-1944

Putra Jaya, Ramadhansyah and K. A., Masri and Mangi, Sajjad Ali and M. I., Mohd Yusak and M. R., Hainin and M. N., Mohd Warid and N., Mashros and H., Yaacob and W. I., Mohd Haziman (2019) Strength properties of porous concrete pavement blended with nano black rice husk ash. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 267-273..

Putra Jaya, Ramadhansyah and K. A., Masri and S. A., Mangi and M. I., Mohd Yusak and N., Mashros and M. N., Mohd Warid and M. K. I. M., Satar and W. I., Mohd Haziman (2019) Strength and porosity of porous concrete pavement containing nano black rice husk ash. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 260-266..

Putra Jaya, Ramadhansyah and K. A., Masri and S. A., Mangi and M. I., Mohd Yusak and Nordiana, Mashros and Muhammad Naqiuddin, Mohd Warid and M. K. I. M., Satar and W. I., Mohd Haziman (2020) Strength and Porosity of Porous Concrete Pavement Containing Nano Black Rice Husk Ash. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 712 (012037). ISSN 1757-8981 (Print), 1757-899X (Online)

Putra Jaya, Ramadhansyah and Khairunisa, Muthusamy and Mohd Rosli, Hainin and Mohd Haziman, Wan Ibrahim and Fadzli, Mohamed Nazri and Mohd Fadzil, Arshad (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-169. ISSN 2229-838X (Print); 2600-7916 (Online)

Putra Jaya, Ramadhansyah and M., Zulkarnain and Z. Z., Mukhtar and N. A., Md Khosim and M. I., Adiyanto and W. I., Mohd Haziman (2021) Prediction of flexural behavior of woven reinforced for concrete reinforcement. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering, 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682. ISSN 1755-1307 (Print); 1755-1315 (Online)

Putra Jaya, Ramadhansyah and M. R., Hainin and O., Rokiah and B. W., Chong and W. I., Mohd Haziman and S. A., Mangi (2021) Estimate the durability of rice husk ash concrete subjected to sulfate attack through wetting and drying cyclic. Lecture Notes in Civil Engineering, 157. pp. 175-181. ISSN 2366-2557

Putra Jaya, Ramadhansyah and M. R., Hainin and O., Rokiah and Ramli, Noram Irwan and W. I., Mohd Haziman and S. A., Mangi (2021) Thermal analysis and x-ray diffraction of rice husk ash blended cement under sodium sulfate with wetting and drying cycles. Lecture Notes in Civil Engineering, 157. pp. 165-173. ISSN 2366-2557

Putra Jaya, Ramadhansyah and Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Khahro, Shabir Hussain (2021) Influence of coal ash on the concrete properties and its performance under sulphate and chloride conditions. Environmental Science and Pollution Research. pp. 1-22. ISSN 1614-7499

Putra Jaya, Ramadhansyah and Mohd Arif, Sulaiman and Rokiah, Othman and Khairunisa, Muthusamy and Chong, Beng Wei and Chek, Y. C. and Youventharan, Duraisamy and Doh, Shu Ing (2021) Compressive strength of concrete containing eggshell powder as partial cement replacement. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering, 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-14., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online)

Putra Jaya, Ramadhansyah and Mohd Haziman, Wan Ibrahim and Ahmad Farhan, Hamzah and Norwati, Jamaluddin and Mangi, Sajjad Ali (2020) Influence of bottom ash as a sand replacement material on durability of self-compacting concrete exposed to seawater. Journal of Engineering Science and Technology, 15 (1). pp. 555-571. ISSN 1823-4690

Putra Jaya, Ramadhansyah and Nadiatul Adilah, Ahmad Abdul Ghani and S. Y., Ayman Mohammed and Putra Jaya, Ramadhansyah and Rokiah, Othman and Mohd Rosli, Hainin (2020) The Influence of Steel Slag as Alternative Aggregate in Permeable Concrete Pavement. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

Putra Jaya, Ramadhansyah and Nurliyana, Ariffin and Mohd Mustafa Al Bakri, Abdullah and Postawa, Przemysław and Shayfull Zamree, Abd Rahim and Mohd Remy Rozainy, Mohd Arif Zainol and Śliwa, Agata and Mohd Firdaus, Omar and Wysłocki, Jerzy J. and Błoch, Katarzyna and Nabiałek, Marcin (2021) Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu2+. Materials, 14 (4). pp. 1-19. ISSN 1996-1944

Putri Zulaiha, Razi and Mohamad Idris, Ali and Noram Irwan, Ramli (2020) Incorporation of Risk Index for Risk Response and Risk Mitigation Strategies of Public-Private Partnership (PPP) Housing Construction Project in Malaysia. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012031). ISSN 1757-899X

Putri Zulaiha, Razi and Noram Irwan, Ramli and Mohamad Idris, Ali (2018) Risk Identification for the Construction of Public-Private Partnership (PPP) Housing In Malaysia. Kaav International Journal of Science , Engineering & Technology, 5 (ISS-4/A7). pp. 43-47. ISSN 2348-5477

Putri Zulaiha, Razi and Noram Irwan, Ramli and Mohamad Idris, Ali and Putra Jaya, Ramadhansyah (2020) Selection of Best Consultant by using Analytical Hierarchy Process (AHP). In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 712 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Putri Zulaiha, Razi and Noram Irwan, Ramli and Putra Jaya, Ramadhansyah and Mohamad Idris, Ali (2020) Selection of contractor by Using Analytical Hierarchy Process (AHP). In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 712 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

R

R., Othman and Khairunisa, Muthusamy and Putra Jaya, Ramadhansyah and Youventharan, Duraisamy and Mohd Arif, Sulaiman and Nadiatul Adilah, Ahmad Abdul Ghani (2019) Experimental study on flexural behaviour of reinforced foamed concrete square hollow beam. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 328-334..

R. P., Munirwan and M., Munirwansyah and K., Jamaluddin and H., Gunawan and A. Z., Mubarak and Putra Jaya, Ramadhansyah and Duraisamy, Youventharan (2020) Liquefaction Potential Analysis of Reusep Prestress Bridge in Pidie Jaya due to 6.4 Mw Earthquake. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-9., 712 (012010). ISSN 1757-8981 (Print), 1757-899X (Online)

Racqueal Manggau , Donold (2013) Causes, effects and possible solutions of variation order in project performance. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Rafidah, Saidin (2013) The effect of solar geometry on a window shade for energy efficient design of building. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Rokiah, Othman and Beng, Wei Chong and Putra Jaya, Ramadhansyah and Mohd Rosli, Mohd Hasan and Mohd Mustafa Al Bakri, Abdullah and Mohd Haziman, Wan Ibrahim (2021) Evaluation on the rheological and mechanical properties of concrete incorporating eggshell with tire powder. Journal of Materials Research and Technology, 14. pp. 439-451. ISSN 2238-7854

Rokiah, Othman and Khairunisa, Muthusamy and Putra Jaya, Ramadhansyah and Duraisamy, Youventharan and M. A., Sulaiman and Nadiatul Adilah, Ahmad Abdul Ghani and Chong, B. W. (2020) Experimental Study on Flexural Behaviour of Reinforced Foamed Concrete Square Hollow Beam. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-8., 712 (012046). ISSN 1757-8981 (Print), 1757-899X (Online)

Rokiah, Othman and Khairunisa, Muthusamy and Putra Jaya, Ramadhansyah and Duraisamy, Youventharan and M. A., Sulaiman and Nadiatul Adilah, Ahmad Abdul Ghani and Chong, B. W. (2020) Finite Element Analysis on the Effect of Hollow Section on the Strength of Foamed Concrete Beam. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 712 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Rokiah, Othman and Khairunisa, Muthusamy and Youventharan, Duraisamy and Mohd Arif, Sulaiman (2019) Influence of Processed Spent Bleaching Earth on the Properties of Foamed Concrete. In: National Colloquium On Wind & Earthquake Engineering, 17-18 August 2018 , Swiss Garden Beach Resort, Kuantan, Malaysia. pp. 148-155..

Rokiah, Othman and Putra Jaya, Ramadhansyah and Khairunisa, Muthusamy and Mohd Arif, Sulaiman and Youventharan, Duraisamy and Mohd Mustafa Al Bakri, Abdullah and Przybył, Anna and Sochacki, Wojciech and Skrzypczak, Tomasz and Vizureanu, Petrica and Sandu, Andrei Victor (2021) Relation between density and compressive strength of foamed concrete. Materials, 14 (11). pp. 1-22. ISSN 1996-1944

Rosezaimee, Abdullah @ Ismail (2015) The managerial perspective on influx of foreign workers in construction companies in Pahang. Faculty of Industrial Management, Universiti Malaysia Pahang.

Rosmimie, Abdullah (2013) Industrial gas piping system for chemical engineering laboratory Universiti Malaysia Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ruhama, Walled (2010) Simulation of natural ventilation system in chemistry laboratory of faculty chemical and natural resources engineering lab building. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

S

Saad, M. Syamsyul H. and W. R., Wan Salleh and R. A., Rahman and S. I., Doh (2019) Investigating the relationship between site supervision and IBS based construction projects. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 274-279..

Saffuan, Wan Ahmad and Khairunisa, Muthusamy and M. H., Hashim and A. M., Albshir Budiea and Nur Farhayu, Ariffin (2019) Effect of unground palm oil fuel ash as partial sand replacement on compressive strength of oil palm shell lightweight concrete. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 236-241..

Saffuan, Wan Ahmad and Khairunisa, Muthusamy and Norhafizah, A.Mohd and Norhaiza, Nordin (2017) Properties of concrete containing ground palm oil fuel ash as fine aggregate replacement. In: International Conference on Building Materials and Materials Engineering (ICBMM 2017), 21-23 September 2017 , Lyon, France. pp. 1-6., 264 (1). ISSN 17578981

Sahara, Mohd Sarif (2018) Behaviour of steel fiber reinforced concrete & high performance concrete exposed to elevated temperature. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Saidah An’nisaa, S. and Nur Farhayu, Ariffin and Nur Asyekin, R. and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) Effect of government policy towards the abandoned housing project in Malaysia. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 227-235..

Saidah An’nisaa, Salam and Nur Farhayu, Ariffin and Mohamad Idris, Ali and Noram Irwan, Ramli (2019) The influence of housing types and price on abandoned housing projects in Malaysia. 10th Asia Pacific Structural Engineering And Construction Conference 2018, 6 (1). pp. 162-172. ISSN eISSN No.: 2590-4140

Senthil Kumar, T. and Mohd Ridzuan, Darun and Mohammad, Aslam (2019) Impact of Brexit on construction stocks listed on Bursa Malaysia. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 176-188., 2019. ISSN 2518-668X

Shashi Kumar, S A Karagaratnan (2008) Development of semi-automatic solar gate system (Mechanical Part). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Aishah, Mat Ali (2012) Cost comparison for construction of house using conventional and interlocking block method. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Siti Aminah, Tukiman and Sabarudin, Mohd (2009) Investigate The Combination Of Coconut Shell And Grained Palm Kernel To Replace Aggregate In Concrete: A Technical Review. In: The Proceeding of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. . (Unpublished)

Siti Farahanum, Ab Rahim (2018) Assessment of construction planning of new project : Medan Ikan Bakar case study. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Farhana, Shammudi (2019) Analyzing the most prominent issues during rehabilitation process of abandoned housing project. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Najihah, Yaakup (2018) Influence of concrete grade and level of seismicity on seismic design of reinforced concrete school building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Siti Norhafiza , Othman (2012) New fire alarm and smoke detector sensor using CCTV. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Siti Nur Azwin, Zulkapri (2021) Warga tempatan digalak sertai sektor binaan. Berita Harian .

Siti Nursyazwani, Kahapah (2015) Awareness of implementation building information modelling (BIM) in construction industries. Faculty of Industrial Management, Universiti Malaysia Pahang.

Solahuddin, Azuwa (2021) A Review on Structural Performance of Fly Ash Reinforced Concrete Beam. International Journal of Innovative Science, Engineering & Technology, 8 (2). pp. 132-135. ISSN 2348-7968

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) Load-Strain Behaviour of Shredded Waste Paper Reinforced Concrete Beam. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020), 22-23 December 2020 , Pekan Pahang, Malaysia. pp. 1-11., 1092 (012063). ISSN 1757-899X

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) A Review Paper on The Effect of Waste Paper on Mechanical Properties of Concrete. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020), 22-23 December 2020 , Pekan Pahang, Malaysia. pp. 1-7., 1092 (012067). ISSN 1757-899X

Suhaida Noorein, Iskandar Mirza (2010) Critical success factors and barriers for industrialised building system (IBS) adoption in construction project. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Suhaidah, Hussain and Xian, See Huei (2019) Factors affecting employees’ turnover intention in construction companies in Klang, Selangor. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019, 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 108-131., 2019. ISSN 2518-668X

Suhaiza, Subri (2014) Study on the problems that influence the success contractor in Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syah Hairizal, Kamarul Arifin (2014) UMP jalin kerjasama MSSA, CIDB. Berita Harian . p. 26.

Syahrul Ramadhan, Ahmad Kamal Ariffin (2013) Computation of solar radiation heat gain in analysing energy efficient operation of an air-conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Syazana, Abdul Aziz (2010) The application of industrialised building system in residential project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

T

Tagod, Manal and Adeleke, A. Q. and Moshood, Taofeeq D. (2021) Coercive pressure as a moderator on organizational structure and risk management: empirical evidence from Malaysian construction industry. Journal of Safety Research, 77. pp. 139-150. ISSN 0022-4375

Tan, Kean Wei (2015) A study of delay sources of construction project in Kuantan area. Faculty of Industrial Management, Universiti Malaysia Pahang.

Tan, Woon Han (2017) Analysis on the effect of different X-bracing arrangements and locations on lateral drift of different storey steel frame buildings subjected to lateral forces using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Tan, Yeong Yu and Doh, Shu Ing and Chin, Siew Choo (2016) Addition of Natural Lime in Incinerated Sewage Sludge Ash Concrete. In: Engineering Challenges for Sustainable Future: Proceedings of the 3rd International Conference on Civil, Offshore and Environmental Engineering (ICCOEE 2016, Malaysia, 15-17 Aug 2016). Taylor& Francis Group, London, pp. 433-437. ISBN 9781138029781

Tan, Yeong Yu and Doh, Shu Ing and Chin, Siew Choo (2018) Eggshell as a Partial Cement Replacement in Concrete Development. Magazine of Concrete Research, 70 (13). pp. 662-670. ISSN 0024-9831

Tan, Yeong Yu and Doh, Shu Ing and Chin, Siew Choo (2016) The Potential Use of SSA and ISSA in Construction Field. A Review. International Journal of Innovative Science, Engineering & Technology, 3 (4). pp. 171-179. ISSN 2348-7968

Tasnim, Sadia and Du, Yunchang and Rahman, M. E and Ahmadi, Muhammad Ekhlasur and Raudhah, Ahmad and Doh, Shu Ing (2020) Effect of using palm oil fuel ash on the durability of cement paste in ammonium nitrate solution. Construction and Building Materials, 257 (119597). pp. 1-10. ISSN 0950-0618

Tay, Hong Wei (2019) Effect of defect geometries upon burst capacity of composite repaired pipe. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

U

UMP, . (2015) 20 syarikat, individu terima penganugerahan CIDB. Kosmo .

UMP, . (2015) Guna kontena bina rumah. Kosmo .

UMP, . (2014) Memperkasakan pembinaan struktur keluli. Berita Harian .

UMP, . (2011) Tempurung sawit dikitar semula menjadi bahan binaan. CREATE (11). ISSN 1823-7487

UMP, . (2015) UMP cadang bina rumah kontena. Sinar Harian .

UMP, LIB (2015) Bina 4 rumah dalam 6 minggu. Metro . p. 14.

UMP, PNC (2017) Bersyukur rumah dibaik pulih. Harian Metro . p. 42.

UMP, PNC Oil palm shell recycled into construction material. Pekan Review, 5 . p. 31. ISSN 2180-3099

UMP, PNC (2016) Projek WBL PUO-UMPH dalam bidang sivil dan pembinaan. UMP News . (Unpublished)

UMP, PNC (2017) Salut atap asbestos elak bahaya. Harian Metro . p. 72.

UMP, PNC (2017) Sukarelawan UMP bantu cat atap. Sinar Harian . p. 41.

UMP, PNC (2017) UMP tingkatkan kesedaran bahaya asbestos. Utusan Malaysia . p. 27.

Umairah ‘Aqilah, Sudin (2015) The impact of benchmarking approach towards performance in construction industry. Faculty of Industrial Management, Universiti Malaysia Pahang.

Ummu Nurulatiqah, Kamis (2019) Influence of peak ground acceleration and concrete grade on seismic design of RC hospital building. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

W

W. I., Mohd Haziman and Mohammed Yahya, Al-Fasih and Nik Nadia Amira, Nik Pa and Putra Jaya, Ramadhansyah and Setiawan, Muhammad Ikhsan (2021) Characterization of mortar with pennisetum purpureum ashes as cement replacement material. IIUM Engineering Journal, 22 (2). pp. 830-98. ISSN 2289-7860

Widia, Mirta and Siti Zawiah, M. D. and Nukman, Yusof (2019) Maximum acceptable frequency of lift for combined manual material handling task in Malaysia. PLoS ONE, 14 (5). pp. 1-13. ISSN 1932-6203

Wong, Michael Sie Ung (2012) Simulation behaviour of fire response to fire resistance steel beams /. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Y

Yap, Qing Fu (2013) A study on the causes and methods to prevent construction delay in Selangor state and Kuala Lumpur. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Youventharan, Duraisamy (2019) Geomechanical Behavior of Bio-Cemented Sand for Foundation Works. In: Use of Sandy Materials in Civil Engineering. IntechOpen, London, pp. 1-21. ISBN 978-1-78985-836-5

Youventharan, Duraisamy and Airey, David (2015) Performance of Biocemented Sydney Sand using ex-situ mixing technique. DFI Journal: The Journal of the Deep Foundations Institute, 9 (1). pp. 48-56. ISSN 1937-5247 (print); 1937-5255 (online)

Youventharan, Duraisamy and Putra Jaya, Ramadhansyah and Jeevithan, K. M. and Rokiah, Othman and Mohd Arif, Sulaiman and Yaacob, H. (2021) Durability Performance of Concrete Debris and Bottom Ash as an Alternative Track Ballast Material. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering, 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-12., 682 (012053). ISSN 1755-1315

Youventharan, Duraisamy and Rokiah, Othman and S. M., Arif (2019) The effects of bottom ash in coastal sand. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 289-296..

Youventharan, Duraisamy and S. M., Arif and Rokiah, Othman (2019) Ultimate bearing capacity of peat treated with cement columns in physical model. In: Proceedings of 3rd National Conference on Wind & Earthquake Engineering and 1st International Seminar On Sustainable Construction Engineering (NCWE & ISSCE 2019), 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 304-310..

Yusmin, Jaafar and Lee, Chia Kuang (2020) Factors influencing Industrialized Building System (IBS) project performance: a systematic review. Journal of Governance and Integrity (JGI), 3 (2). pp. 64-81. ISSN 2600-7479 (Print); 2600-786X (Online)

Yusnani, Husli (2011) The assessment of measurement application for timber traditional Malay house. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Z

Z. M., Jaini and Shahrul Niza, Mokhatar and Hadipramana, J. and Mazrul Nizam, Abu Seman (2019) Dynamic responses of sandwich cemboard-foamed concrete panels subjected to low-velocity impact. In: IOP Conference Series: Materials Science and Engineering, The 2nd Global Congress on Construction, Material and Structural Engineering, 26-27 August 2019 , Melaka, Malaysia. pp. 1-9., 713 (012025). ISSN 1757-8981 (Print), 1757-899X (Online)

Zahidy, Abd Hamid (2016) Develop the constructionpreneurial business success checklist in the construction industry. PhD thesis, Universiti Malaysia Pahang.

Zahidy, Anat Anaqie and Sorooshian, Shahryar and Zahidy, Abd Hamid (2019) Critical success factors for corporate social responsibility adoption in the construction industry in Malaysia. Sustainability, 11 (22). pp. 1-24. ISSN 2071-1050

Zahrizan, Zakaria (2007) Web based information model to support maintenance and operations management. Masters thesis, Universiti Malaysia Pahang.

Zahrizan, Zakaria and Nasly, Mohamed Ali and Amanda, Marshall-Ponting and Ahmad Tarmizi, Haron and Zuhairi, Abd. Hamid (2012) The potential of implementing Building Information Modelling (BIM) in Malaysian Construction Industry: An exploratory study. In: Proceeding National Conference for Postgraduate Research (NCON-PGR 2012), 8-9 September 2012 , Universiti Malaysia Pahang. pp. 1-15..

Zhang, M. H. and Liu, H. F. and Tian, S. and Ma, Y. C. and Doh, Shu Ing (2020) Influence of desert sand and cooling regime on the compressive strength of high strength concrete after high temperatures. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering, 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 712 (012019). ISSN 1757-899X

Zhi Jia, Ling (2014) Impact of cost overrun factors on the project delay in construction industry, Pahang, Malaysia. Faculty of Industrial Management, Universiti Malaysia Pahang.

Zuliza Amina , Zulkifli (2012) Effective safety management ethics for construction industry. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Zulkarnain, Muhamad (2013) Adaptable effectiveness of industrialised building (IBS) in construction projects. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

This list was generated on Sat Oct 23 09:48:02 2021 +08.