Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

A

A. K., Prasada Rao (2015) Nucleation in Al Alloys Processed By MCDC Casting. Journal of Materials Engineering and Performance, 24 (6). pp. 2219-2224. ISSN 1544-1024. (Published)

A. K., Prasada Rao (2014) Understanding the Evolution of the Microstructure in Melt-Conditioned Direct-Chill Cast Al Alloys. Materials and Manufacturing Processes, 29 (7). pp. 848-852. ISSN 1042-6914. (Published)

A. K., Prasada Rao and S. L., Pramod and B. S., Murty and Srinivasa R., Bakshi (2015) Effect of Sc Addition on the Microstructure and Wear Properties of A356 Alloy and A356–TiB2in Situ Composite. Materials and Design, 78. pp. 85-94. ISSN 0261-3069. (Published)

Addie Irawan, Hashim and Nonami, Kenzo and Mohd Razali, Daud (2013) Optimal Impedance Control with TSK-type FLC for Hard Shaking Reduction on Hydraulically Driven Hexapod Robot. In: Autonomous Control Systems and Vehicles. Intelligent Systems, Control and Automation: Science and Engineering, 65 . Springer, Japan, pp. 223-236. ISBN 978-4-431-54275-9 (print); 978-4-431-54276-6 (online)

Ahmad Fathiey, Razali (2019) A laboratory study of electrical resistivity and consolidation properties of Kuantan bauxite deposits. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Syazwan, Mohammad (2012) The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmat, Farouq and Mohd Yusri, Mohd Yunus and Nurul Ain, Ismail (2021) Simulation solvent extraction of rare earth metal source origin from marine sediment. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-16., 641 (1). ISSN 1755-1307

Ahmed, Mohammad Tofayal and Monir, Minhaj Uddin and Azrina, Abd Aziz and Hasan, Yeasir and Hossain Khan, Mohammad Forrukh and Islam, Kamrul and Hasan, Mehedi and Biswas, Biplob Kumar and Woobaidullah, Abu Sale and Samad, Abdus and Ahmed, Fee Faysal and Rifat, Shamiul Islam and Al Noman, Abdullah and Faruque, Jamal (2022) Hydrochemical investigations of coastal aquifers and saltwater intrusion in severely affected areas of Satkhira and Bagerhat districts, Bangladesh Bangladesh. Arabian Journal of Geosciences, 15 (712). pp. 1-22. ISSN 1866-7511. (Published)

Amierul Amin, Abdul Aziz (2013) Fabrication of aquaponic gravity flow plantation system for lettuce plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amin Khairi, Rosli (2013) Automatic temperature control system for aquaponic green house. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Attili, Ramkiran and Vo, Dai-Viet N. and Mohd Sabri, Mahmud (2021) Syngas production from ethanol dry reforming using Cu-based perovskite catalysts promoted with rare earth metals. International Journal of Hydrogen Energy, 46 (48). pp. 24845-24854. ISSN 0360-3199. (Published)

Awang Shri, D.N. and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Effect of high-pressure torsion deformation on surface properties and biocompatibility of Ti-50.9 mol. %Ni alloys. Biointerphases, 9 (2). 029007-1. ISSN 1934-8630. (Published)

Aziz, Badhrulhisham Abdul and Hisyam, Anwaruddin and Yunus, M. Y. M. and Cheng, Chin Kui and Nurul Ain, Ismail (2017) Simulation studies of mineral processing. , [Research Report: Research Report] (Unpublished)

Azrulhafiq, Mohd Azizi (2012) Experimental and analytical evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

B

Bindamin, Benjunior (2012) Effect of precipitate hardening treatment on microstructure and mechanical properties of cast aluminum silicon alloy (A356). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

C

Chew, Chun Chi (2008) Internal structure change of carbon tool steel after heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

D

Das, Debashish and Sadiq, Ali Safa and Noraziah, Ahmad (2016) An Efficient Time Series Analysis for Pharmaceutical Sector Stock Prediction by Applying Hybridization of Data Mining and Neural Network Technique. Indian Journal of Science and Technology, 9 (21). pp. 1-7. ISSN 0974-6846. (Published)

Das, Sanjeev and Barekar, NS and Fakir, Omer El and Wang, Liliang and A. K., Prasada Rao and Patel, JB and Kotadia, HR and Bhagurkar, A and Dear, John P and Fan, Z (2014) Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting. Materials Science and Engineering: A, 620. pp. 223-232. ISSN 0921-5093. (Published)

Dayangku Noorfazidah, Awang Sh'ri and Zahiruddeen Salam, Zahari and Yamamoto, Akiko (2021) Effect of ECAP die angle on mechanical properties and biocompatibility of SS316L. Metals, 11 (10). pp. 1-10. ISSN 2075-4701. (Published)

F

Fong Ling, Tan (2014) Evaluation of effectiveness parameters on gas dehydration plant (simulation). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

G

G. Q., Huang and J., Wu and W. T., Hou and L. H., Shah and A. R. H., Midawi and A. P., Gerlich and Y. F., Shen and F. Q., Meng (2021) Microstructural evolution and mechanical behavior of powder metallurgy based SiC/Al–Mg-Sc-Zr nanocomposite subjected to multi-pass friction stir processing. Materials Science and Engineering: A, 806 (140831). pp. 1-14. ISSN 0921-5093. (Published)

H

Hanis Hazirah, Arifin and Nurfarahin, Zainal and Libriati, Zardasti and Nordin, Yahaya and Lim, Kar Sing and Norhazilan, Md Noor (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi (Sciences & Engineering), 81 (3). pp. 169-177. ISSN 2180–3722. (Published)

Huang, Guoqiang and Wu, Jie and Hou, Wentao and Luqman Hakim, Ahmad Shah and Midawi, Abdelbaset R. H. and Cao, Fujun and Gerlich, Adrian and Shen, Yifu and Meng, Fanqiang (2021) A novel two-step method to prepare fine-grained SiC/Al-Mg-Sc-Zr nanocomposite: Processing, microstructure and mechanical properties. Materials Science and Engineering: A, 823 (141764). pp. 1-14. ISSN 0921-5093. (Published)

I

Ismail, N. A. and Mohd Yunus, M. Y. and Abd Aziz, Mohd Aizudin (2019) Comparison of optimal solvent extraction stages between P204 and [A336][P204] for the separation of europium and gadolinium. IOP Conference Series: Materials Science and Engineering, 702 (1). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

K

Khairil Azman, Masri and Mazlan, Abu Seman and Ramadhansyah, Putra Jaya and Syafiqah Shamimi, Mohd Zali (2021) Nanotitan. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

L

L. H., Shah and Bun, T. and Nagata, S. and Shikama, T. (2012) The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 713-721. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

L. H., Shah and Guo, Shihui and Walbridge, Scott and Gerlich, Adrian (2017) Effect of Tool Eccentricity on the Properties of Friction Stir Welded AA6061 Aluminum Alloys. Manufacturing Letters, 15. pp. 14-17. ISSN 2213-8463. (Published)

Lee, Sue Yee and Sorooshian, Shahryar and Maarof, Mohd Ghazali and Muzamir, Hasan (2018) Challenge of Bauxite Logistics. Electronic Journal of Geotechnical Engineering (EJGE), 23 (4). pp. 753-756. ISSN 1089-3032. (Published)

Lim, Kar Sing and Siti Nur Afifah, Azraai and Nordin, Yahaya and Norhazilan, Md Noor and Zardasti, Libriati and Kim, Jang-Ho Jay (2019) Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches. Thin-Walled Structures, 139. pp. 321-333. ISSN 0263-8231. (Published)

Loong, Winson Sia Shen (2012) Development Of Drilling Fluid System Using Carboxymethyl Cellulose (Cmc) For High Temperature-High Pressure (Hthp) Applications. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Luqman Hakim, Ahmad Shah and Khodabakhshi, Farzad and Gerlich, Adrian (2019) Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. Journal of Manufacturing Processes, 37. pp. 212-219. ISSN 1526-6125. (Published)

M

M. F., Ishak and M. F., Zolkepli and E. M. H., Masyhur and N. Z. M., Yunus and A. S. A., Rashid and M. A., Hezmi and D. Z. A., Hasbollah and A. R., Yusoff (2022) Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation. Physics and Chemistry of the Earth, Parts A/B/C, 128 (103279). pp. 1-9. ISSN 1474-7065. (Published)

M. Y. M., Yunus and Nurul Ain, Ismail and Badhrulhisham, Abdul Aziz (2018) Economic potential assessment of rare earth extraction sequence based on rule-based framework. Journal of Mechanical Engineering and Sciences (JMES), 12 (4). pp. 4263-4274. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Z. A., Wahab and Muhammad Hafiz, Mazwir and Nurul Ain, Ismail (2017) Responsible Mining: Challenges To Make It Right - Government Perspective. Journal of Malaysian Critical Metals, 2. pp. 1-4. ISSN 0128-2557. (Published)

Masdiyana, Ibrahim and Wan Mastura, Wan Ibrahim and Mohd Mustafa Al Bakri, Abdullah and Nabialek, Marcin and Putra Jaya, Ramadhansyah and Setkit, Monthian and Romisuhani, Ahmad and Je˙z, Bartłomiej (2023) Synthesis of Metakaolin Based Alkali Activated Materials as an Adsorbent at Different Na2SiO3/NaOH Ratios and Exposing Temperatures for Cu2+ Removal. Materials, 16 (3). pp. 1-22. ISSN 1996-1944. (Published)

Mohamad Faiz, Mohamed Yatim (2012) A study of interlayer gallery of modified sodium montmorillonite (MMT) nanofiller using ion exchange and surfactant method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Hafizul Hisyam, Yahya (2008) Characterization and modeling of static recovery process of brass (Copper Zinc) alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamed Zulqarnain, Mohamed Akram (2012) Ductile fracture strain in uniaxial tensile test of plane specimen’s. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Syahir Syahmi, Hassan (2013) Fabrication of aquaponic dry gravel plantation system for tomato plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adam, Mohd Noor (2008) Simulation of the supersonic jet length for KT oxygen lance with 22 mm diameter and 2:1 ratio of NG: O2 at electric arc furnace. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aizad, Kamarol (2008) Characterisation and modelling of static recovery process of stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizudin, Abd Aziz and Khairuddin, Md Isa and Radzuwan, Ab Rashid (2017) Pneumatic jigging: influence of operating parameters on separation efficiency of solid waste materials. Waste Management and Research, 35 (6). pp. 647-655. ISSN 0734242X. (Published)

Mohd Azizi, Junit (2008) Characterisation and modelling of static recovery process of aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakhrurrazi, Ishak and M. F. M., Talhah and M. F., Zolkepli and S., Daud and N. S. M., Zin (2023) Exploration of secondary deposit to determine manganese ore body. International Journal of Engineering Technology And Sciences (IJETS), 10 (1). 24 -33. ISSN 2289-697X. (Published)

Mohd Hafizuddin, Mokhtor (2013) Gravity flow vertical farming using aquaphonic system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Haizal, Mohd Husin and Dewayanto, Nugroho and Mohd Ridzuan, Nordin and Li, Jinlin (2015) The Characteristics of Copper Containing SBA-15 Prepared by Impregnation and pH Adjustment Methods and Their Activities For N2O Decomposition. Advances in Environmental Biology, 9 (6). pp. 6-14. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Mohd Hazwan, Kamarudin (2008) Characterisation and modelling of static recovery process of plain carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hosni, Ismail (2008) Characterisation and modelling of static recovery process of Aluminium-copper alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Tamizi, Mazlan and Khairil Anuar, Ramly and Nur Emilia, Abdullah Harun (2019) Bauxite industries: lesson learn from governance perspective. In: KnE Social Sciences: FGIC 2nd Conference on Governance and Integrity 2019 , 19-20 August 2019 , Yayasan Pahang, Kuantan, Pahang, Malaysia. pp. 1214-1229., 2019. ISSN 2518-668X

Mohd khairul, Ya'kub (2008) Modelling of the supersonic jet length for KT oxygen lance with 15 cm diameter and 1:1 ratio of O2: NG at electric arc furnace using computational fluid dynamics (CFD). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd.Halimi, Azman (2013) Mechanistic study of co2 corrosion related to corrosion in oil and gas exploration and production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Alif Hilmi, Mustafa (2019) Mineralogy and geochemistry investigation of Kuantan bauxite. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhamad Azrul, Amir (2012) Effect of solution treatment temperature on microstructure and mechanical properties of a356 alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ameer, S. and Siti Noraishah, I. and Azizan, Ramli and Ratih, D. (2022) Investigate of the factors contributing to unsafe behaviour of iron ore miners in Malaysia. Current Science and Technology (CST), 2 (1). pp. 30-39. ISSN 2785-8804. (Published)

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2021) Effect of Different Nickel Percentage in Solder Alloy towards Intermetallic Compound Formation and Growth. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-9., 1092 (012012). ISSN 1757-899X

Muhammad Hanif, Muhamad (2019) Geophysical subsurface profiling of Kuantan bauxite formation. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Syauqi, Shaidan (2013) Development of edm tool for producing titanium alloy automotive valve application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N

Nadia Eliza Natrah, Jamaluddin (2014) Study on wax deposition of heavy crude oil in pipelines. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nazatul Shiema, Moh Nazar and Noor Syazwani, Mansor and Umar, Khayam and Nor Asiah, Muhamad and Mariatti, Jaafar Mustapha and Amir Izzani, Mohamed and Mohamad Kamarol, Mohd Jamil (2022) Effect of silica nanofiller in cross-linked polyethylene as electrical tree growth inhibitor. International Journal of Electrical and Computer Engineering, 12 (3). pp. 2256-2263. ISSN 2088-8708. (Published)

Nik Noranis Syazlin, Nik Abd Razak (2019) Impact of minerals freight and logistic operation towards traffic safety in Kuantan road network. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nithiya, Arumugam (2012) Improving the flow of petroleum products in pipelines using natural additives and powders. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hyder A., Abdul Bari).

Nor Salwani, Ismail (2013) Study on wax deposition of heavy crude oil in pipeline transportation by using oil in water emulsion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noraina Mazuin, Sapuan (2021) Tak sabar nak melombong bauksit. Utusan Malaysia . pp. 1-2.

Nurain, Abu Hasan (2014) Aquaponics system for treat a catfish wastewater. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nuramalina Munirah, Rosli (2013) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurmazuria, Mazelan (2019) Characterization of physical properties Kuantan bauxite. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Ain, Abu Othman (2014) Aquaphonics system for a clarias batrachus wastewater treatment. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Ain, Ismail and Anwaruddin, Hisyam and Safuan, Shariff and Badhrulhisham, Abdul Aziz (2016) Interaction, Mechanism and Synergism of Rare Earth in [A336][DEHPA] Extraction System. Australian Journal of Basic and Applied Sciences, 10 (17). pp. 48-54. ISSN 19918178. (Published)

Nurul Ain, Ismail and Mohd Aizudin, Abd Aziz and Mohd Yusri, Mohd Yunus and Anwaruddin, Hisyam (2019) Selection of extractant in rare earth solvent extraction system: A review. International Journal of Recent Technology and Engineering, 8 (1). pp. 728-743. ISSN 2277-3878. (Published)

Nurul Amalina, Shahar (2017) Impacts assessment of bauxite mining activites on human and environment in Bukit Goh. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Anniyah, Sobri and Mohd Yusri, Mohd Yunus and Noorlisa, Harun (2023) A review of ion adsorption clay as a high potential source of rare earth minerals in Malaysia. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

P

Peter, Octovia (2007) Characterization of intermetallic particles in aluminium alloy AA5083 series after recrystalization heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Prosser, M. and Johnson, M. and Saptaji, Kushendarsyah (2017) Sustainable Bauxite Mining Guidelines. Journal of Malaysian Critical Metals, 2. pp. 1-5. ISSN 0128-2557. (Published)

R

Ramachandran, Kaaliarasan and K., Kadirgama and D., Ramasamy and Hussein, A.M. and Azmi, W. H. and Tarlochan, F. and Kadirgama, G. (2017) Thermophysical Properties Measurement of Nano Cellulose in Ethylene Glycol/Water. Applied Thermal Engineering, 123. pp. 1158-1165. (Published)

S

Shafiq Afif, Ariff (2008) Gas reticulation system design for Universiti Malaysia Pahang Gambang campus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Noraishah, Ismail and Azizan, Ramli (2023) Investigate the factors affecting safety culture in the Malaysian mining industry. Resources Policy, 85 (103930). pp. 1-12. ISSN 0301-4207. (Published)

Siti Noraishah, Ismail and Azizan, Ramli and Hanida, Abdul Aziz (2021) Influencing factors on safety culture in mining industry: A systematic literature review approach. Resources Policy, 74 (102250). pp. 1-9. ISSN 0301-4207. (Published)

Siti Noraishah, Ismail and Azizan, Ramli and Hanida, Abdul Aziz (2021) Research trends in mining accidents study: A systematic literature review. Safety Science, 143 (105438). pp. 1-13. ISSN 0925-7535. (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini (2012) Effect of Nickel Doping on Interfacial Reaction between Lead-free Solder and Ni-P Substrate. Advanced Materials Research, 488-48. pp. 1375-1379. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Astuty, Amrin (2014) Effect Of Solder Volume on Interfacial Reaction Between SAC405 Solders and EN(B)EPIG Surface Finish. Advanced Materials Research, 845. pp. 76-80. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Azmah Hanim, Mohamad Ariff (2012) Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish. Advanced Materials Research, 415-417. pp. 1181-1185. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Nabila, Tamar Jaya and Muhammad Asyraf, Abdullah (2022) The Effect of Laser Soldering onto Intermetallic Compound Formation, Growth. In: Recent Progress in Lead-Free Solder Technology. Springer, Switzerland AG, pp. 265-282. ISBN 978-3-030-93441-5

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2015) Development of Diffusion Barrier Layer on Copper-Printed Circuit Board Using Electroless Plating Method. International Journal of Computational Methods and Experimental Measurements, 3 (4). pp. 329-339. ISSN 2046-0546 (print); 2046-0554 (online). (Published)

Sorooshian, Shahryar and Muzamir, Hasan and Chong, Yee Chin and Wong, Huei Ing (2019) Pushes and pulls of ISO28000 Implementation in supply-chain of Malaysia mining. International Journal of Supply Chain Management (IJSCM), 8 (5). pp. 75-78. ISSN 2050-7399 (Online). (Published)

Suhaimi, Md Yusoff (2008) Effect of milling time on mechanical and physical behavior of ALMMC reinforced with AL2O3. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suziella, Awang (2013) Design a novel inhibitor for corrosion protection in oil and gas environments. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahmi Syafiq, Salahuddin (2019) Shear strength studies of Kuantan bauxite. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Syarifah, Abd Rahim and Suriati, Ghazali and Rohana, Abu and Ali, Eman N. (2017) Responsible Mining Towards The Sustainable and Mineral Resource Development: Education Perspective. Journal of Malaysian Critical Metals, 2. pp. 1-3. ISSN 0128-2557. (Published)

Syazwan, Sukri (2017) Liquefaction risks on bulk cargoes carrying Bukit Goh bauxite in accordance International Maritime Solid Bulk Cargoes (IMSBC) code. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

T

Thakur, Maheshwar S. and Singh, Neha and Sharma, Arti and Rana, Rohit and Abdul Syukor, Abd Razak and Naushad, Mu and Kumar, Sunil and Kumar, Manish Anil and Singh, Lakhveer (2022) Metal coordinated macrocyclic complexes in different chemical transformations. Coordination Chemistry Reviews, 471 (214739). pp. 1-24. ISSN 0010-8545. (Published)

Ting, Wee Kiet and Hassan, A. and Sahdi, F. and Taib, S. N. L. and Sutan, N. M. and Badhrulhisham, Abdul Aziz and Fourie, Andy (2020) A narrow wall system to capture temperature stress-strain behavior in paste backfill. Geotechnical Testing Journal, 43 (2). pp. 1-15. ISSN 0149-6115. (Published)

W

Walinjkar, Devavrat and A. K., Prasada Rao (2015) C-DC and MC-DC Casting of Al-alloys-A Comsol Approach. Materials Letters, 161. pp. 698-700. ISSN 0167-577X. (Published)

Wan Zaiton, Wan Sulaiman (2014) Explosion sensitivity and severity of south east asian coals. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Z

Zhi, Huang Low and Ismayadi, Ismail and Mohd Shamsul Ezzad, Shafie and Idza Riati, Ibrahim and Ertuğrul, Mehmet and Raba’ah Syahidah, Azis and Norlaily, Mohd Saiden and Intan Helina, Hasan and Fadzidah, Mohd Idris and Rodziah, Nazlan (2019) Magnetic phase transition of mechanically alloyed single sample Co0.5Ni0.5Fe2O4. Results in Physics, 15. pp. 1-9. ISSN 2211-3797. (Published)

Zulkafli, Hassan and M. Y. M., Yunus and Nurul Ain, Ismail and A., Ramli and K., Ramesh (2017) The Role of Universiti Malaysia Pahang (UMP) In Human Capital Development for The Mineral Resources Industry: Rare Earth Case Study. Journal of Malaysian Critical Metals, 2. pp. 1-8. ISSN 0128-2557. (Published)