Items where Year is 2007

Abang Irfan, Abang Abdul Halil (2007) Hand gesture recognition system using image processing. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

'

'Umayr Hasan, Sohaimi (2007) Fatigue strength to the different type of specimens and shapes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

A

A. K., Amiruddin and S.M, Sapuan (2007) Burner Flame Image Analysis Techniques. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Abd Hamid, Hat (2007) Design and fabrication of mini foldable table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd. Ghani, Muhammad Khairi (2007) Microcontroller based smart fan system. Facutly of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd. Rani, Mior Mohammad Hafiizh (2007) Active infrared motion detector for house security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Ghani, Khairul A'Alam (2007) Obstacle avoidance mobile robot. Faculty of Electrical & Electronic, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2007) Modelling and fabrication of cylinder head for single cylinder two stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abdul Aziz (2007) Analyze the rear suspension structure for passenger car. Faculty of Mechanical Engineering, University Malaysia Pahang..

Abdul Hafiz, Mohamad (2007) Design and development of autonomous guided vehicle (AGV). Faculty of Mechanical Engineering, University Malaysia Pahang.

Abdul Sahli, Fakhruddin and Junaida, Sulaiman and Ruth Wong, Suk Yee (2007) Headache and Migraine Diagnosis Using Neural Networks. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Abdul Wahab, Muhammad Nubli and Kassim, Hafizoah (2007) Developing strategic syura tool to enhance effectiveness of meeting. , [Research Report] (Unpublished)

Abdul Wahab, Muhammad Nubli and Kassim, Hafizoah and Abdul Aziz, Nawawi (2007) Developing safety aptitude measurement tool for contract workers during turnaround operation in petrochemical plants in Gebeng. , [Research Report] (Unpublished)

Abdul Zarif, Abdul Malek (2007) Design and fabrication of flexible rack for lecturer use. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah, Embong and S.P., Rahayu (2007) Overview of Random Forest : Effective Ensemble Method in Modern Data Mining. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Abu Bakar, Muhammad Lokman Al-Hakim (2007) Graphical user interface for signal generator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Addam, Annuar (2007) Design and fabrication of cylinder head turn table (rotate 360 degree). Faculty of Mechanical Engineering, University Malaysia Pahang.

Adnan, Anis Zafirah (2007) Automatic book binding machine. Faculty of Electrical & Elecronic Engineering, Universiti Malaysia Pahang.

Afdila, Aziz (2007) Tensile strength variation of pre-strained aluminium alloy due to annealing. Faculty of Mechanical Engineering, University Malaysia Pahang.

Afifah Nailah, Muhamad and Jasni, Mohamad Zain (2007) Using Spiral Scan Technique for Medical Image Watermarking with Tamper Detection and Recovery. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Ahmad, Azrulnor (2007) Development of traffic light control system using programmable logic controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Hazury, Hamid (2007) Design and fabrication of stationery rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Kamil, Miskam (2007) Design and fabrication power window apparatus (bowden cable type). Faculty of Mechanical Engineering, University Malaysia Pahang.

Ahmad Thibraani, Termizi (2007) Home automation using bluetooth technology. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zarir, Mohamad (2007) Human powered LED torches. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aida Azwa, A. Halim (2007) Development of projectile launcher for learning purpose. Faculty of Mechanical Engineering, University Malaysia Pahang,.

Ainatul Mardiah, Ibrahim (2007) The design of an adaptive tuned vibration absorber. Faculty of Mechanical Engineering, University Malaysia Pahang.

Aini, Ahmad (2007) Biotek bukan asing dalam Islam. Utusan Malaysia, 18 .

Aini, Ahmad and Zuridan, Mohd Daud (2007) Spiritual Intelligence. In: Professional Skills Kit for UMP Graduates. Universiti Malaysia Pahang.

Aizad Ayasyi, Ab Ghafar (2007) Experimental evaluation of vortex generator usage to reduce the coefficient of drag of proton saga car. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amar Reza, Mohammad Firdaus (2007) Design and fabrication of removable container trolley. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amir Hamzah, Azahar (2007) Design and fabrication of computer table. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amiruddin, Ahmad (2007) Car cooling system during parking using blowe. Faculty of Mechanical Engineering, University Malaysia Pahang.

Ang, Soon Tat (2007) Development of UMP runabout vehicle (URV) frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arham Saufi, Mohd. Isa (2007) Active loudspeaker system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ariff Safwan, Radzi (2007) WAP alumni registration system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ariff Syakirin, Ghazalli (2007) Joint solder of lead free solder (Sn0.7Cu) and prrinted circuit board with various heat treatment temperatures. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aris, Khairul Anuar (2007) Development of motor control using graphical user interface. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Audi, Sha Rizal (2007) Design of a compressed natural gas (CNG) mixer for1500cc engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aziman, Abdullah (2007) Archiving Explicit Knowledge into a Knowledge-Based Systems: Promosing Benefits and Challenges at User Domain. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Azma, Abdullah and Nik Kamariah, Nik Ismail and Jasni, Mohamad Zain (2007) Sistem Kenalpasti Gred Kayu Gaharu Menggunakan Pemprosesan Gambar. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Azmir, Azhari and A. A., Aziz and M. M., Noor (2007) Optimization Of Abrasive Waterjet Machining Process Parameters Using Orthoganalarray With Grey Relational Analysis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. pp. 21-30.. (Published)

Azree, Musa (2007) Wireless laptop alarm system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Azuan, Alias (2007) Modeling and simulation of single phase inverter with PWM using MATLAB/SIMULINK. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

B

Balan Michael, Erick (2007) Design and development of automatic self balancing scale. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

C

Chan, Seng Chang (2007) Design for serviceability evaluation of car door. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Wai Theng (2007) The effects of fibre volume fraction of composite plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cheng, C. K. and Hajar, H. Hani and Ku Syahidah, Ku Ismail (2007) Production of Bioethanol from Oil Palm Empty Fruit Bunch. In: Proceedings of the International Conference On Sustainable Materials (ICoSM2007) , 9-11 June 2007 , Batu Ferringhi, Penang. pp. 69-72.. (Published)

Cheong, Kee Loan (2007) MC68000 microprocessor development board. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

D

Dahlan, Hishahmuddin (2007) Development of computer integrated manufacturing (CIM) frameworks at UMP FKM laboratory. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dahrul Akma, Mohd Sabri (2007) Design and fabrication of shear test rig for sandwich cores. Faculty of Mechanical Engineering, University Malaysia Pahang.

E

Eddy Ahmadi Azizi, Sukimin (2007) Design and fabrication of can crasher. Faculty of Mechanical Engineering, University Malaysia Pahang.

Engku Mohd Amri, Engku Ariff (2007) Autonomous lighting and security system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

F

F. R. M., Romlay (2007) Integrated Of Stepper And Dc Motor Control System Using Microcontroller For Automatic Dishwasher. In: Conference on Product Design 2007 , 10-11 December 2007. , Batu Ferenggi, Penang, Malaysia,. . (Unpublished) (Unpublished)

F. R. M., Romlay (2007) Penerapan 100% Konsep Pembelajaran Berpusatkan Pelajar (SCL) Dalam Pengajaran di FKM. In: Engineering Education Conference , 3 May 2007 , M.S.Garden Hotel, Kuantan, Pahang. . (Unpublished) (Unpublished)

F. R. M., Romlay and Asmizam, Mokhtar (2007) Optimization Of A Cutting Process For Wire-Electric Discharge Machining At Welding Joint. In: Conference on Product Design 2007 , 10-11 December 2007 , Batu Ferenggi, Penang, Malaysia. . (Unpublished) (Unpublished)

Faiq Nur, Abdul Halim (2007) The effect of water-side scale formation to heat transfer process and boiler efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faizal Zamri, Zainal Abidin (2007) Predicting of tool wear on machining parameters using design of experiment (DOE) methodology. Faculty of Mechanical Engineering, Umversiti Malaysia Pahang.

Fauziah, Zainuddin and Awanis, Romli and Roslina, Mohd Sidek (2007) Sistem Penjejakan Pemasangan Kenderaan Atas Talian Dengan Pendekatan Tepat Pada Masa (Just In Time). In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

G

Gan, Kiat Yong (2007) The importance of industrial engineering in small & medium industries :a time study in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gow, Moh Kee (2007) Autonomous robot. Faculty Electrical & Electronic Engineering, Universiti Malaysia Pahang.

H

Hafizoah, Kassim and Zuraina, Ali (2007) The Use of ICT in the Implementation of Student-Centered Learning (SCL). Internet Journal of e-Language Learning & Teaching, 4 (1). pp. 15-31. ISSN 1985-6024. (Published)

Haidil Hazha, Husaini (2007) Development of axis movement controller for 2-axis configuration machine control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hasbullah, Mat Isa (2007) Design and fabrication of rear car spoiler for Proton Wira model. Faculty of Mechanical Engineering, University Malaysia Pahang.

Hegde, Gurumurthy and Chigrinov, V. G. (2007) New Azo-dyes for Photoalignment: Exploring the New Path. In: International Conference and Exhibition on Nanotechnology and Advanced Materials (ICNAM 2007) , 11-13 December 2014 , Hong Kong. . (Published)

Hegde, Gurumurthy and Prasad, S. Krishna and Nair, Geetha G. and Jayalakshmi, Jayalakshmi (2007) Evidence of Wormlike Micellar Behavior in Chromonic Liquid Crystals: Rheological, X-ray, and Dielectric Studies. Journal of Physical Chemistry B, 111 (33). pp. 9741-9746. ISSN 1520-6106 (print); 1520-5207 (online). (Published)

Hegde, Gurumurthy and Prasad, S. Krishna and Nair, Geetha G. (2007) Nonequilibrium Liquid Crystalline Layered Phase Stabilized by Light. Journal of Physical Chemistry B, 111 (2). pp. 345-350. ISSN 1520-6106 (print); 1520-5207 (online). (Published)

Husain, Nik Muhammad Fashan (2007) Electronic ballast. Faculty of Electrical & Electronic Engineerinh, Universiti Malaysia Pahang.

Hussein, Masayu (2007) Automatic greenhouse watering system using microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

I

Ihsan, Ahmad Zubir (2007) Design and development of encoder sensor with graphical user interface (GUI). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Iqbal Zulkarnain, Abdul Aziz (2007) Object's RGB color extraction. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ismail, M. (2007) Essential oil extraction from gaharu. , [Research Report] (Unpublished)

Ismail, Mohd Fitry (2007) Toolbox for power system fault analysis using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

J

Jamaludin, Sallim and Roslina, Abd Hamid and Rosni, Abdullah and Ahamad Tajudin, Abdul Khader (2007) Towards Understanding the Protein Structure and its Problems: Selecting Data Sources and Data Representation. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Jamaludin, Sallim and W. Muhammad Shahrir, W.Hussin (2007) A Background Study on Ant Colony Optimization Metaheuristic and its Application Principles in Resolving Three Combinatorial Optimization Problems. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Jantie, Beatrice Connie (2007) Strength variation of pre-strain aluminium alloys (axial compression) due to isochronal annealing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

K

Kevin Krishanderan, K.Vasudhevan (2007) Design of model glider. Faculty of Mechanical Engineering, University Malaysia Pahang.

Khor, Huoy Thing (2007) Home weather monitoring system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

L

Lim, Wai Tuck (2007) Design and fabrication of UMP go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Liang Heong (2007) Design and fabrication of three axis mechanism with AC servo motor in application of personal computer numerical control. Faculty of Mechanical Enginering, Universiti Malaysia Pahang.

Linn, Wen Teck (2007) Portable water alarm detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Liza, Ranggi (2007) Strength variation of pre-strained (transverse compressive) aluminium alloy due to isochronal annealing. Faculty of Mechanical, Universiti Malaysia Pahang.

M

M., Mohamad Rashidi and I., Mohamad Hasbullah (2007) Application of Taguchi Method using computer software to determine nodularisation effect of ductile iron castings. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

M. F., Abas (2007) PCB Design & Fabrication For Begineers. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang. ISBN 978-967-42632-2-8

M. M., Rahman and A. K., Ariffin and S., Abdullah (2007) Finite Element Based Vibration Fatigue Analysis Of A New Two-Stroke Linear Generator Engine Component. Mechanical Engineering Research Journal, 2 (1). pp. 63-74. ISSN 1823-0334. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. S. M., Sani and M. R. M., Rejab (2007) Fatigue Analysis of Spot-Welded Joints using Finite Element Analysis Approach. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3 ARC) 2007 , 27-28 November 2007 , Kuala Lumpur. . (Unpublished) (Unpublished)

M. N. M., Kahar and Abdullah, Mat Safri and Siti Zanariah, Satari and Mohamad Fadli, Zolkipli (2007) Password Usage: An Analysis in Academic Institution. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

M. S., Najib and M. S., Jadin and Raja Mohd Taufika, Raja Ismail and Mohd Rusllim, Mohamed (2007) Design and Implementation of PID Controller in Programmable Logic Controller for DC Motor Position Control of the Conveyor System. In: Proceedings of the 3rd WSEAS/IASME International Conference on Dynamical Systems and Control , 13-15 October 2007 , Arcachon, France. pp. 266-270.. (Published)

Maaruf, Muhamad (2007) Design and fabrication of foldable chair. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mamat, Marhatinie (2007) Automated car braking system using fuzzy logic controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2007) Human Behaviour Modelling For Discrete Event And Agent Based Simulation: A Case Study. In: Annual Operational Research Conference 49 (OR 49) , 2007 , Edinburgh, UK. . (Unpublished) (Unpublished)

Mazlina, Abdul Majid and Noorhuzaimi@Karimah, Mohd Noor and Junaida, Sulaiman (2007) Implementing A Real Time E Learning: Why we need? In: National Conference on Software Engineering & Computer Systems (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan, Pahang. pp. 1-3.. (Unpublished) (Unpublished)

Mgt Arnaz, Mgt Ramli (2007) Design improvement of wira's driver seat usine integrated DFA and VE. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Misran, Noor Hadi (2007) Microcontroller based power factor corrector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Fazli, Alias (2007) Front desk customer service for queue management system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohamad Hanapi, Mohamad (2007) Design and fabrication of exhibition rack. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohamad Isa, Mohd Shahimi (2007) Power flow analysis software package using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Khairull Izzuan, Mohd Idris (2007) Numerical study of boundary layer due to stationary flat plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Rizza, Othman and Mohamad Wijayanuddin, Ali and Mohd Zaki, Kamsah (2007) Process Fault Detection Using Hierarchical Artificial Neural Network Diagnostic Strategy. Jurnal Teknologi (Sciences and Engineering), 46. pp. 11-26. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohamad Suhaimi, Samsudin (2007) Investigation on the different types of materials of joining for automotive panel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Hafizuddin, Mokhtar (2007) Regenerative chatter in end milling on mould aluminum via experimental. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Izhan, Jafry (2007) Automatic greenhouse watering system and monitoring. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Nazreen, Jamaluddin (2007) Model of smart key apportion system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Norhafizi, Mohamed Yusof (2007) Designing workspace for better performance, safety and health in manufacturing industry, an ergonomics case study. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammed Muzakkir, Hanafiah (2007) Design of an ergonomic computer mouse based on a case study about Musculosketel Disorder (MSD). Faculty in Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Afizan, A Ripin @ Ariffin (2007) Development of exhibition cabinet. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Ayub, Adnan (2007) Design and fabrication a mould for tensile testing for powder specimen. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Azraie, Suarin (2007) Automatic tester device for earth leakage circuit breaker (ELCB). Faculty of Electronic & Engineering, Universiti Malaysia Pahang.

Mohd Azuan, Abu Shah (2007) Design and fabrication of the blow mold component. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Dzohairy, Mohammad Mohsan (2007) Design and fabrication of toolbox. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Dzulqarnain, Ahmad Suhaimi (2007) Development of compress air transportation (CAT) for alternative energy utilization. Faculty of Mechanical Engineering, Universiti MalaysiaPahang.

Mohd Fadhli, Mohd Nasir (2007) Design of a blow off valve for turbocharged engine applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadly, Nur Yakim (2007) The design and analysist of a low cost tire endurance testing machine frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Ismail (2007) Improving design of chair with flip table (analysis and ergonomics). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fairuz, Ramli and Abdullah, Embong and Jasni, Mohamad Zain (2007) Dual Watermarking Framework for Industrial Digital Images. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Mohd Firdaus, Ahmad Sani (2007) Design and fabrication transparent trolley toolbox. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Ghani, Awang and Suriya Kumar, Sinnadurai and Muhammad Nubli, Abdul Wahab (2007) Developing an Instrument to Measure And Provide Remedial Devices on Study Orientation Skills and Its Relationship Towards The Academic Performance of Undergraduates. In: Proceedings of 1st International Malaysian Educational Technology Convention , 2-5 November 2007 , Universiti Teknologi Malaysia. pp. 781-787.. (Published)

Mohd Hafiz, Ghazalli (2007) Finite element analysis of cam and its follower contact stress mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Nor Izham (2007) Experimental modal analysis on Wira car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazrul, Mohd Rusli (2007) Development of arm movement notification system. Facutly of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hizir Arafat, Tambun (2007) Design and fabrication of power window apparatus (frame type). Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Ikhwan Saifulizam, Roslan (2007) Computational fluid dynamics (CFD) simulations on gas turbine combustion chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Iqbal Anas, Mat Nawi (2007) Design and fabricate chair with flip table. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Johaneis, Abu Bakar (2007) Visualization robot sorter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Khairi, Ali (2007) Investigation on the different types method of joining for automotive panel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairof Fais, Abd Raop (2007) Polypropylene (PP) reinforced with recycle polyethylene terephthalate (PET) as an alternative material for new plastic product. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairudin, Yahya (2007) Simulation stress and finite element analysis based of Suzuki FXR 150cc motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Mokhtar, Ismail (2007) Development of digital wind speed meter with wind direction. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Muhaymin, Ismail (2007) Development of cutter for printed circuit board using hydraulic principle. Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazmi, Mohd Nordin (2007) Design and fabrication of MS88 fiberglass helmet. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Noor, Mustafa (2007) Modelling and fabrication of crankcase for single cylinder for 100 CC four-stroke engine. Faculty of Mechanical Engineering, University Malaysia Pahang .

Mohd Nor Ridzuan, Jamaludin (2007) Strength of gas tungsten arc welding joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nordin, Mohd Kamarul Azli (2007) Wireless university accessibility systems. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nurul Akmal, Mohd Yusof (2007) Development of car tire rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qayyuum, Kamarudin (2007) Golfbot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Ridzwan, Adnan (2007) Development of simple shoe dryer apparatus. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Rozaimi, Arshad (2007) A case study on manufacturing waste reduction through just in time. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ruzaimi, Mohd Ariffin (2007) Universal remote control. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Khamis (2007) Design and fabrication of the assignment tray. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Shahruddin, Harun (2007) Design switch mode power supply (SMPS) using pulse width modulation (PWM) controller technique. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahrulnizal, Ghozali (2007) Designing a new concept of narrow dynamic compression plate (narrow DCP). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahrulnizam, Abu Seman (2007) Analysis on losses and boiler efficiency to find optimum cooling water flowrate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shaifudin, Azmi (2007) Design and fabrication of A4 manual paper shredder. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Shukri, Mai (2007) Design and fabrication of crankcase for single cylinder 2-strokes engine. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Tarmizi, Abd Aziz (2007) Development of automatic gate opener mechanism. Faculty of Mechanical E1ngineering, University Malaysia Pahang.

Mohd Yazid, S Hamid (2007) Design and fabrication an electric buggy frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yusri, Yusof (2007) Development of the user friendly spreadsheet based SPC (statistical process control) on SME company. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaid, Mohd Zuhaili (2007) Graphical user interface development for energy saving air-conditioning control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Zaimatulakmar, Abdullah (2007) Mathematically analysis on two stroke uniflow scavenging system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zambri, Abidin (2007) Design and fabrication of portable apron clothesline. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mokhtar, Mohd Ariffuddin (2007) Equalizer for PA system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Amir Shah, Arif Harun (2007) Gear ratio investigation of automotive manual transmission. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Farkhanif, Jamaluddin (2007) Design & fabrication the front skirt of Proton Satria. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Fridy Nizam, Harun (2007) Investigation and analysis of finding the injection molding gate by using moldflow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Harif, Ghani (2007) Design and fabrication of portable book rack. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Khairi, Che Yusoff (2007) Development of PC based home energy management system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Nor, Arif (2007) Brake control system for motorist vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Rusydi, Ali (2007) Design and fabrication of adjustable ceiling fan blade cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhammad, Zulkifly (2007) Design and fabricate the braking system for the electric buggy car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Mohd Nazeri (2007) Recognition of emergency and non-emergency light using MATROX and VB6. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Altaf, A Jalil (2007) Design and development of digital PID controller to control speed of permanent magnet DC motor for pcb drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Arshad, Zainol Abidin (2007) Analysis of filling stage for injection molding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Faizal, Alias (2007) Redesign of rice cooker component by using an integrated boothroyd dewhurst DFA and axiomatic design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fikri, Che Manshor (2007) Two dimensional roll forming simulation using plane strain elements with simplified roller contact definition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Kamal Asyraf, Pubin (2007) Designing a new concept of LC-DCP broad type bone plate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Najmudin, Mohd Taib (2007) Design and analysis a new spoiler for UMP HEV using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

N

N., Ahmad and R., Abdul Hamid and S. N., Abdul Samad and M. N. M., Kahar and Abdullah, Mat Safri (2007) E-Appointment Scheduling Using Constraints Logic Programming. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Nabhan, Ismil (2007) Effect of heat treatment temperature on SN-0.7CU solders material on microstructure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nadarajah, Hemalatha (2007) Grain size effect on softening behaviour of Al-Mg alloy due to paint bake heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nadira, Muda and Nik Kamariah, Nik Ismail and Jasni, Mohamad Zain and Siti Azami, Abu Bakar (2007) Optical Character Recognition By Using Template Matching (Alphabet). In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Ng, Kok Ming (2007) Mobile robot : Transmitter module. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ngau, Kien Keong (2007) Design, analysis and fabrication of bottle neck elactrode. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Asma Fazli, Abdul Samad and Arshad, Ahmad and Mohd Kamaruddin, Abd Hamid (2007) Product Optimization of a Fed-batch Fermentation Process. In: Proceedings of European Congress of Chemical Engineering (ECCE-6) , 16-20 September 2007 , Copenhagen. pp. 1-17.. (Published)

Noorhuzaimi@Karimah, Mohd Noor and Junaida, Sulaiman and Khor, Huei Chen (2007) Development of Visitor Management System Using Smart Card: UMP Case Study. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Noorlin, Mohd Ali and Siti Zanariah, Satari and Noorhuzaimi@Karimah, Mohd Noor and Lee, Hooi Yeoh (2007) Evaluating The Development of Diabetes Risk Using Probability Technique. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Nor Faezah, Hamzah (2007) Two dimensional modelling for catalytic combustion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Nashriq Azizi, Abd Shukor (2007) Modelling and fabrication of intake valve for Perodua Kancil engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Shahriza , Abdul Karim and Amelia, Hasan (2007) Reading Habits And Attitude In The Digital Age: Analysis Of Gender And Academic Program Differences In Malaysia. The Electronic Library, 25 (3). pp. 285-298. ISSN 0264-0473. (Published)

Nor Yazi, Khamis (2007) The perceptions of students at Indera Mahkota MARA Professional College of English Language Proficiency and its role in preparation for employment. In: The Second Biennial International Conference on Teaching and Learning of English in Asia: Exploring New Frontiers (TELiA2) , 14-16 June 2007 , Holiday Villa Beach & Spa Resort, Langkawi. pp. 1-13.. ISBN 978-983-42061-2-3 (Published)

Noralam, Noor Azlan (2007) Pickbot. Facutly of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noraziah, Ahmad (2007) Managing replication and transactions using neighbour replication on data grid. PhD thesis, Universiti Malaysia Terengganu (Contributors, UNSPECIFIED: UNSPECIFIED).

Noraziah, Ahmad and S. N., Abdul Samad and Muhammed Ramiza, Ramli and N. M., Noor and Syahrulanuar, Ngah and Mohamad Fadli, Zolkipli (2007) Database System Model of Tender Management System in Kadastra. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. pp. 1-3.. (Unpublished) (Unpublished)

Norfarahanim, Muhamad@Ramli (2007) Design and fabrication of ceiling fan blades cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Norsyamsul Syazwan, Mohd Nuji (2007) Design and fabrication of pneumatic walking robot. Faculty of Mechanical Engineering, University Malaysia Pahang.

Nour, A. H. and R. M., Yunus and Anwaruddin, Hisyam (2007) Water-in-Crude Oil Emulsions: Its Stabilization and Demulsification. Journal of Applied Sciences , 7 (22). pp. 3512-3517. ISSN 1812-5654. (Published)

Nur Afiq, Abu Bakar (2007) Industrial vibration and noise analysis of conventional drilling machine on different type of materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Farida, Ismail (2007) Analysis of gauge glass failure possibility for boiler. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Izzati, Abdullah (2007) Automated food attendance robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurfhaizatul Aqma, Chik Aik (2007) Computation of airfoil boundary layer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

P

Pejabat, Naib Canselor UMP (2007) Teks Ucapan Alu-Aluan Yang Hormat Prof. Dato’ Dr. Mohamed Said Bin Mat Lela Naib Canselor Universiti Malaysia Pahang. In: Sempena Sambutan Hari Raya Aidilfitri Peringkat Universiti Malaysia Pahang 2007, 29 Oktober 2007, Perkarangan Kompleks Perkhidmatan Siswa Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2007) Teks Ucapan Naib Canselor Universiti Malaysia Pahang Sempena Perhimpunan Bulanan Universiti Malaysia Pahang Bagi Bulan Oktober 2007. In: Membina Kesatuan Minda Dan Kebersamaan Dalam Perkhidmatan: Iktibar Ramadhan, 8 Oktober 2007, Astaka, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2007) Teks Ucapan Yang Hormat Prof. Dato' Dr. Mohamed Said Bin Mat Lela, Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Pelancaran Hong Kong Smart Visit 2007, 27 Jun 2007, Conference Room, Kompleks Perkhidmatan Siswa. (Unpublished)

Pejabat, Naib Canselor UMP (2007) Teks Ucapan Yang Hormat Prof. Dato' Dr. Mohamed Said Bin Mat Lela, Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Perhimpunan Bulanan Universiti Malaysia Pahang, 3 September 2007, Astaka, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2007) Teks Ucapan Yang Hormat Prof. Dato' Dr. Mohamed Said Bin Mat Lela, Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Perasmian Minggu Induksi Siswa Universiti Malaysia Pahang 2007, 1 Julai 2007, Astaka, Universiti Malaysia Pahang. (Unpublished)

Peter, Octovia (2007) Characterization of intermetallic particles in aluminium alloy AA5083 series after recrystalization heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

R

R. A., Bakar and Abdul Rahim, Ismail and Ismail, Ali (2007) The Comparison Of Engine Performance For Diesel And CNG Fuel Using GT-Power Software. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

R. A., Bakar and N.M.I.N, Ibrahim and M.F.A, Rahim and I., Ali (2007) Numerical Analysis of In-Cylinder Process Small Two-Stroke SI Engine. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

R. A., Bakar and Abdul Rahim, Ismail (2007) Development of Intake and Exhaust Stroke Flow Simulation in an Engine Cylinder Using CFD Model. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Radzi, Norzan (2007) Drawbot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ramli, Muhamad Firdaus (2007) Optimal dispatch of power generation software package using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Randel, Dana (2007) A toolbox for steady state and transient stability analysis with MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Rui Jin, Ho (2007) Motored test rig design and fabrication for small engine testing. Faculty of Mechanical Engineerin, University Malaysia Pahang.

S

Sahin, Mehmet and Haslinda, Hashim (2007) Challenges of Teaching Technical Vocabulary at University Level. In: Proceedings of the International Conference on Teaching and Learning (ICTL 2007) , 15-16 November 2007 , Putrajaya, Malaysia. pp. 1-7.. (Published)

Sahri, Mohd Shahrizan (2007) A study of ultrasonic car braking system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Saidin, Muhamad Zulfikri (2007) Development of sensor using graphical user interface. Facullty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Samurgam, Tilakiswaran (2007) Development of battery powered tricycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahfiran, Sarifuddin (2007) Productivity improvement through line balancing technique in a small medium enterprise (SME) manufacturing plant. faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharifah Noor Shahirah, Syed Mohd Nordin (2007) Cutting force of end cutting tool milling machining. Faculty of Mechanical Engineering, Universiti Malaysia pahang.

Shuhaizal, Mohd Noor (2007) Failure analysis of driveshaft of Toyota SEG. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Qhadijah, Abdul Rashid (2007) Modeling and simulation of an asymmetric plane diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suhaimi, Sulaiman (2007) Vehicle color glossiness study by using SPC in an automotive manufacturing company. Faculty of MechanicalEngineering, Universiti Malaysia Pahang.

Suparman, Samsuddin (2007) Design and development of ladder new mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sy Mohd Syathir, Sy Ali Zainol Abidin (2007) Intelligent fingerprint recognition system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syahrul Nizam, Zaini (2007) Automatic vehicle detection system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syaiful Nizam, Hassan (2007) Extraction of essential oil from jasmine flower using supercritical CO2 method. , [Research Report] (Unpublished)

Syed Abdul Kadir, Syed Khalid (2007) Numerical solution of boundary layer problem due to moving flat plate using Runge-Kutta methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

T

Tan, Kok Haw (2007) Feasibility study of fuel reactor to produce synthetic gas as an alternative energy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teh, Soon Chiang (2007) Design and simulation of die and punch for sheet metal on round bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teoh, Jin Shen (2007) Product design of can opener by using effort flow analysis approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tey, Meng Kar and Jasni, Mohamad Zain and Goh, Yin Soon (2007) Measuring Aesthetics of Mandarin Learning Web Pages: Are User's Perceptions Congruent with Aesthetics-Measurement Application (AMA). In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

U

UMP, PNC (2007) Hari Kualiti dan Penyampaian Anugerah UMP 2007. Program UMP . pp. 1-34. (Unpublished)

UMP, PNC (2007) Majlis Pelancaran Pembinaan Kampus Tetap UMP. Program UMP . pp. 1-6. (Unpublished)

UMP, PNC (2007) Majlis Pengisytiharaan Nama dan Pelancaran Logo UMP. Program UMP . pp. 1-20. (Unpublished)

W

Wahidah, Haron (2007) Match between UMP furniture dimension and student's anthropometry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Ahmad Saiful, Wan Muhamad Sukeri (2007) Development of bottom cavity of 4 liter bottle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Azhar, Wan Yusoff and Nafrizuan, Mat Yahya and Azlyna, Senawi (2007) Tuning of Optimum PID Controller Parameter using Particle Swarm Optimization Algorithm Approach. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Wan Maseri, Wan Mohamad and Abdullah, Embong and Jasni, Mohamad Zain (2007) Improve Knowledge Visualization through an Interactive Graph-based Dashboard System with Key Performance Indicator: A Case Study of University Dashboard for Higher Education. In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007) , 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished) (Unpublished)

Wan Mohd Suhaimi, Wan A. Bakar (2007) Design and analysis of vortex generator for UMP HEV using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Abd Latif (2007) Design and fabrication of adjustable side table. Faculty of Mechanical Engineering, University Malaysia Pahang.

Wan Nur Azhani, W. Samsudin (2007) AC motor position control using fuzzy logic controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Y

Yaakob, Mohammad Ariff (2007) Development of single phase PWM inverter for UPS application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Yap, Pei Xiang (2007) Total quality management approach, a case study in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Youventharan, Duraisamy and Bujang, B. K. Huat and Azlan, A. Aziz (2007) Methods of Utilizing Tropical Peat Land for Housing Scheme. American Journal of Environmental Sciences, 3 (4). pp. 259-264. ISSN 1553-345X. (Published)

Yunus, M. Y. M. and Abdul Samad, Noor Asma Fazli and Harun, N. and Siti Aishah, Mustafa (2007) Optimization of short-path distillation of ginger extraction pilot plant (GEPP) process using multivariate statistical process control. , [Research Report] (Unpublished)

Z

Zahrizan, Zakaria (2007) Web based information model to support maintenance and operations management. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainulariffin, Awang (2007) Design and fabrication of notebook table. Faculty of Mechanical Engineering, University Malaysia Pahang.

Zamri, Mohamed and Rosnah, Mohd Yusuff (2007) Automotive Ergonomics: Passenger Cars Interior Dimension Parameters and Comfort. In: International Conference On Ergonomics (ICE2007) , 3-5 Dec 2007 , Universiti Malaya, Kuala Lumpur, Malaysia. . (Published)

Zohedi, Fauzal Naim (2007) Wireless electronic notice board. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Zoolnasri, Abu Harun (2007) Over current protection relay using pic micro controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Zulhelmi, Zainal (2007) Development scale model of steam engine with Stephenson gearing system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkiplie, Jamal (2007) Design and fabricate remote controlled submarine with on board wireless camera. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.