Items where Division is "Faculty of Mechanical Engineering" and Year is 2014
 | Up a level |
A. N., Oumer and Bachtiar, Dandi (2014) Modeling and Experimental Validation of Tensile Properties of Sugar Palm Fiber Reinforced High Impact Polystyrene Composites. Fibers and Polymers, 15 (2). pp. 334-339. ISSN 1229-9197 (Print); 1875-0052 (Online). (Published)
A. N. M., Rose and B. M., Deros and M. N. A., Rahman (2014) Critical success factors for implementing lean manufacturing in Malaysian automotive industry. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1191-1200. ISSN 2040-7459. (Published)
Abdul Adam, Abdullah and R., Mamat and Yatsufusa, Tomoaki (2014) Analysis of Diesel Spray Droplets Behavior using Shadowgraph Technique Images. In: International Conference on Optoelectronics Information Processing (ICOIP2014) , 21-21 June 2014 , Moscow, Rusia. pp. 1-6..
Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong , Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification using the Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Z., Ismail and Kong, K. K. and Ong, Zhi Chao and Noroozi, Siamak and Chong, W. T. (2014) Impact Force Identification With Pseudo-Inverse Method on a Lightweight Structure for Under-Determined, Even-Determined and Over-Determined Cases. International Journal of Impact Engineering, 63. pp. 52-62. ISSN 0734-743X. (Published)
Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Kong, Keen Kuan and Ong, Zhi Chao and Chong, Wen Tong and Siamak, Noroozi (2014) Impact Force Identification Using the Modal Transformation Method in Collocated and Noncollocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Adam Shariff Adli, Aminuddin and Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. (2014) Analytic Network Process Model for Sustainable Lean and Green Manufacturing Performance Indicator. In: AIP Conf. Proc.: Statistics and Operational Research International Conference (SORIC 2013) , 3–5 December 2013 , Sarawak. pp. 32-38., 1613. ISBN 9780735412491
Adnan Mohammed, Hussein (2014) Heat transfer enhancement using nanofluids in the automotive cooling system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah and Amir, Aziz (2014) Comparative Study of Particulate Matter (PM) Emissions in Diesel Engine Using Diesel-Methanol Blends. Applied Mechanics and Materials, 465-46. pp. 1255-1261. ISSN 1662-7482. (Published)
Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Ali, Obed M. (2014) Effects of Particulate Matter Emissions of Diesel Engine using Diesel–Methanol Blends. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 959-967. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Ahmad Fitri, Yusop and R., Mamat and Mohd Hafizil, Mat Yasin and Shafiq, Suhaimi (2014) Effects of the Inlet Velocity Profiles on the Prediction of Velocity Distribution inside an Electrostatic Precipitator (ESP). International Journal of Computer and Electrical Engineering, 6 (1). pp. 64-66. ISSN 1793-8163. (Published)
Ahmad Rasdan, Ismail and Isa, Halim and Hambali, Arep and Seri Rahayu, Kamat and Rohana, Abdullah and Abdul Rahman, Omar (2014) Development of a Decision Support System for Analysis and Solutions of Prolonged Standing in the Workplace. Safety and Health at Work, 5 (2). pp. 97-105. ISSN 2093-7911. (Published)
Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azim, Arshad (2014) Experimental Investigation of Heat Transfer in a Bubbling Fluidized Bed for Geldart A And B Particles. In: 11th International Conference on Fluidized Bed Technology (CFB 2014) , 14-17 May 2014 , Beijing, China. pp. 1-7..
Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2014) Characterization and Development of Fluidizing Velocity Profile of Sand Particles in Fluidized Bed Combustor (FBC). In: FB 20 , 11-12 Dec 2014 , Okayama University. . (Unpublished)
Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz and Mohd Hafizil, Mat Yasin (2014) Effect of Ambient Temperature on the Performance of a Diesel Engine Operating with Biofuel. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. .
Akasyah, M Khathri and R., Mamat and Abdul Adam, Abdullah and Gan, Leong Ming and Azri, Alias (2014) Effect of Compression Ratio on Compression Ignition Engine Performance Operating with Biofuel. In: International Conference On Automotive Innovation and Green Energy Vehicle , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8..
Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) Combustion Characteristic of a Diesel Engine Operating with Methanol as Alternative Fuel. Applied Mechanics and Materials, 660. pp. 452-456. ISSN 1662-7482. (Published)
Akasyah, M Khathri and R., Mamat and Amir, Aziz and Azri, Alias and Nik Rosli, Abdullah (2014) One-Dimensional Simulation of the Combustion Process in an Engine Cylinder with Ethanol. Applied Mechanics and Materials, 660. pp. 447-451. ISSN 1662-7482. (Published)
Amir, Aziz and Ahmad Fitri, Yusop and R., Mamat (2014) Engine Performance and Emission of Emulsified Biodiesel. In: 3rd International Conference on Machine Design and Manufacturing Engineering (ICMDME 2014) , 24-25 may 2014 , Jeju Island, South Korea. pp. 1-6.. (Unpublished)
Amir, Aziz and Asraf, Jusoh and R., Mamat and Abdul Adam, Abdullah (2014) Effect of Water Content and Tween 80 to the Stability of Emulsified Biodiesel. Applied Mechanics and Materials, 465 (466). pp. 191-195. ISSN 1662-7482. (Published)
Amir, Aziz and Wong, Chung Siong and R., Mamat and Hagos, F. Y. (2014) Exhaust Emissions Reduction Of Diesel Engine Fueled With Emulsified Palm Oil Methyl Esters. Applied Mechanics and Materials, 660. pp. 457-461. ISSN 1662-7482. (Published)
Amir, Khalid and M. D., Anuar and M. Farid, Sies and B., Manshoor and Izzuddin, Zaman and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Mixture Formation and Flame Development in Biodiesel Burner Combustion Using Direct Optical Visualization Technique. Applied Mechanics and Materials, 663. pp. 8-12. ISSN 1662-7482. (Published)
Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Tezara, C. (2014) Experimental Investigations And Study Corrosion Model Of Welded 6061 Aluminium Exposed In Marine Environment. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-9..
Asmara, Y. P. and Yap, Chun Wei and Mohd Fazli, Ismail and Khairi, Yusuf (2014) Flow Assisted Erosion-Corrosion of High Speed Steel (HSS) in Nanofluid Coolant. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering , 22-26 September 2014 , Kuala Lumpur. pp. 1-4..
Asmara, Y. P. and Juliawati, Alias and J., Jaafar and K., Azuar and J. P., Siregar and Kurniawan, Tedi (2014) Effects Pre-strain of Carbon Steel on Stress-Strain Diagram in CO2 Environment with the Presence of H2S. International Journal of Material Science Innovations (IJMSI), 2 (3). pp. 52-58. ISSN 2289-4063. (Published)
Asmara, Y. P. and Nur Azhani, Abd Razak and Salwani, Mohd Salleh (2014) Analysis of Corrosion Prediction Software for Detection Corrosion in Oil and Gas Evironment Containing Acetic Acid, CO2 and H2S Gases. In: International Symposium on Corrosion & Materials Degradation (ISCMD 2014) , 14-16 Mei, 2014 , PWTC, Kuala Lumpur. pp. 1-5.. (Unpublished)
Asmara, Y. P. and Siregar, J. P. and Tezara, C. and Juliawati, Alias (2014) Electrochemical Behaviour of High Stress Steel (AISI 4340) in CO2 Environments with the Presence of H2 Gas. Applied Mechanics and Materials, 695. pp. 98-101. ISSN 1662-7482. (Published)
Asnul Hadi, Ahmad and Naher, S. and S. N., Aqida and D., Brabazon (2014) Routes to Spheroidal Starting Material for Semi-Solid Metal Processing. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier, Singapore, pp. 135-148. ISBN 9780080965338
Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, D. (2014) Effects of Cooling Rates on Thermal Profiles and Microstructure of Aluminium 7075. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1685-1694. ISSN 2180-1606. (Published)
Asnul Hadi, Ahmad and S., Naher and D., Brabazon (2014) Injection Tests and Effect On Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets. Materials Science and Engineering, 611-612. pp. 1637-1644. (Published)
Asnul Hadi, Ahmad and Naher, S. and Brabazon, D. (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminum Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1042-6914 (print), 1532-2475 (online). (Published)
Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2014) The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Processes, 29 (2). pp. 134-139. ISSN 1532-2475. (Published)
At-Tasneem, Mohd Amin and N. T., Rao and Tuan Mohammad Yusoff, Tuan Ya and M. S., Idris and N. M. M., Ammar (2014) Numerical Simulation of Multiple Arrays Arrangement of Micro Hydro Power Turbines. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (5). pp. 929-935. (Published)
At-Tasneem, Mohd Amin and Wan Mohamad , Azam and Ummu Kulthum, Jamaludin (2014) A Study on the Effect of Flow Rate on the Power Generated by a Pico Hydro Power Turbine. World Applied Sciences Journal. pp. 420-423. ISSN 1818-4952. (Published)
Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Surface Characterization of TiNi Deformed by High-pressure Torsion. Applied Surface Science, 289. pp. 338-344. ISSN 0169-4332. (Published)
Awang Shri, D.N. and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Effect of high-pressure torsion deformation on surface properties and biocompatibility of Ti-50.9 mol. %Ni alloys. Biointerphases, 9 (2). 029007-1. ISSN 1934-8630. (Published)
Awang Shri, Dayangku Noorfazidah and Tsuchiya, Koichi and Yamamoto, Akiko (2014) Cytocompatibility Evaluation and Surface Characterization of TiNi Deformed by High-pressure Torsion. Materials Science and Engineering: C, 43. pp. 411-417. ISSN 0928-4931. (Published)
Azim, Arshad and Hassan, Ibrahim and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin (2014) Study on the Application of Fit-Viability Framework for Renewable Energy Technology Evaluation. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. pp. 1-4..
Azim, Arshad and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Rosdi, Hussin (2014) CFD Study of Tidal Current Turbine Shroud for Initial Design Evaluation. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .
Azman, Idris and Azim, Arshad and Shahrani, Anuar and Achmmmad, Shukrie (2014) Tidal-current Power Generation by Vertical Axis Underwater Turbine with Diffuser in Coastal Area of Peninsular Malaysia. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .
Azman, Idris and Azim, Arshad and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Rosdi, Hussin (2014) Study of tidal current power generation by vertical axis underwater turbine with diffuser in Costal Peninsular Malaysia. Advances in Environmental Biology, 8 (22). pp. 116-119. ISSN 1995-0756(Print); 1998-1066(Online). (Published)
Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and G., Najafi (2014) Heat Transfer and Friction Factor of Water Based TiO2 and SiO2 Nanofluids Under Turbulent Flow In a Tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38. ISSN 0735-1933. (Published)
Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar (2014) Comparison of Convective Heat Transfer Coefficient and Friction Factor of TiO2 Nanofluid flow in a tube with Twisted Tape Inserts. International Journal of Thermal Sciences, 81. pp. 84-93. ISSN 1290-0729. (Published)
Azmi, W. H. and Sharma, K. V. and Sarma , P. K. and R., Mamat and Shahrani, Anuar and Sundar, L. Syam (2014) Numerical Validation of Experimental Heat Transfer Coefficient with SiO2 Nanofluid Flowing in a Tube with Twisted Tape Inserts. Applied Thermal Engineering, 73. pp. 294-304. ISSN 1359-4311. (Published)
Azri, Alias and Kenya, Kuwagi and Atsuto, Kogane and Hiroyuki, Hirano and Toshihiro, Takami (2014) DEM-CFD Simulations for Various Fluidizations. International Journal of Chemical and Environmental Engineering, 5 (1). pp. 15-17. ISSN 2078-0737. (Published)
Azri, Alias and Kuwagi, Kenya and Kogane, Atsuto and Hirano, Hiroyuki and Takami, Toshihiro (2014) Non-dimensionalization and Three-dimensional Flow Regime Map for Fluidization Analyses. Chemical Engineering Science, 119. pp. 199-211. ISSN 0009-2509. (Published)
Baba, M. Deros and Ahmad Rasdan, Ismail and Jaharah, A. Ghani and Mohd Yusri, Mohd Yusof (2014) Conformity to occupational safety and health regulations in Malaysian small and medium enterprises. American Journal of Applied Sciences, 11 (3). pp. 499-504. ISSN 1554-3641. (Published)
Bachtiar, Dandi and Siregar, J. P. and Ahmad Shahrizan, Sulaiman and M. R. M., Rejab (2014) Tensile Properties of Hybrid Sugar Palm/Kenaf Fibre Reinforced Polypropylene Composites. Applied Mechanics and Materials, 695. pp. 155-158. ISSN 1662-7482. (Published)
Bastian Wibar, Momang and N. M. Zuki, N. M. (2014) Design of CF for Automotive Body Parts Based on Artificial Intelligent. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-7..
Billy, Anak Sup and Tanti Zanariah, Shamshir Ali and Mohd Farid, Zainudin and R. A., Bakar (2014) Experimental Study of Water Heating Efficiency between Aluminium and Copper Absorber Plate in Solar Flat Plate Collector. Applied Mechanics and Materials, 660. pp. 709-713. ISSN 1662-7482. (Published)
D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482. (Published)
F., Basrawi (2014) Effect of Solar Fraction on the Economic Performance of a Solar Air-Conditioning by an Adsorption Chiller. In: International Sciences, Technology and Engineering Conference (ISTEC 2014) , 19-21 September 2014 , Akademi Koreksional Malaysia, Langkawi. pp. 1-6..
F., Basrawi and Hassan, Ibrahim and Chand, M. R. R. and Yamada, Takanobu (2014) Effect Of Operation Strategies On The Economic Performance Of A Hybrid Photovoltaic-Micro Gas Turbine Trigeneration System. In: Proceedings of the 4th International Conference on Production, Energy and Reliability (ICPER2014) , 3-5 June 2014 , Kuala Lumpur Convention Centre, Kuala Lumpur. pp. 1-6..
F., Basrawi and Yamada, Takanobu and Obara, Shinaya (2014) Economic and Evironmental based Operation Strategies of a Hybrid Photovoltaic-microgas Turbine Trigeneration System. Applied Energy, 121. pp. 174-183. ISSN 0306-2619. (Published)
Fatimah, Dzaharudin (2014) Numerical study of the dynamics of microbubble clusters in ultrasonic fields. PhD thesis, The University of Melbourne (Contributors, UNSPECIFIED: UNSPECIFIED).
Fazliana, Fauzun and S. N., Aqida and Md Saidin, Wahab (2014) Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties. Advanced Materials Research, 1024. pp. 215-218. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Fazliana, Fauzun and S. N., Aqida and Naher, S. and Brabazon, D. and Calosso, Francesco and Rosso, M. (2014) Effects of Thermal Fatigue on Laser Modified H13 Die Steel. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 975-980. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Gan, Hui Leng and Law, Hoon Chit and R. A., Bakar (2014) Development of a Newly Designed Combined Grinding Equipment. In: 5th International Conference on Energy and Sustainability , 16-18 December 2014 , Putrajaya. .
Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Syngas (H2/CO) in a Spark-Ignition Direct-Injection Engine. Part 1: Combustion, Performance and Emissions Comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895. ISSN 0360-3199. (Published)
Hamada, K. I. and M. M., Rahman (2014) An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1852-1865. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Hamada, K. I. and Mohammed, M. K. and M. M., Rahman (2014) Development of a Test-Rig for a Modern Motorcycle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2034-2041. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Hamid, Yusoff and M. Z., Abdullah and Kamarul Arifin, Ahmad and M. K., Abdullah and Shafiq, Suhaimi (2014) Experimental Study on the Effect of Skin Flexibility on Aerodynamic Performance of Flapping Wings for Micro Air Vehicles. Applied Mechanics and Materials, 629. pp. 18-23. ISSN 1662-7482. (Published)
Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Hogas, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2014) Effect of Air-fuel Ratio on the Combustion Characteristics of Syngas (H2:CO) in Direct-injection Spark-ignition Engine. Energy Procedia, 61. pp. 2567-2571. ISSN 1876-6102 . (Published)
I., Ismail and S. N., Aqida (2014) Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application. Key Engineering Materials, 611 (612). pp. 746-755. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Ibrahim, T. K. and M. M., Rahman (2014) Effect of Compression Ratio on the Performance of Different Strategies for the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. 1747-1757. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
K., Kadirgama and M., Yogeswaran and S., Thiruchelvam and M. M., Rahman (2014) Mathematical Modeling for Surface Roughness When Milling Aisi 304 Stainless Steel. Jokull Journal, 65 (4). pp. 1-9. ISSN 0449-0576. (Published)
K., Kadirgama and A. K., Amiruddin and R. A., Bakar (2014) Estimation Of Solar Radiation By Artificial Networks: East Coast Malaysia. Energy Procedia, 52. pp. 383-388. ISSN 1876-6102 . (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) Heat Transfer Enhancement Using Nanofluids in an Automotive Cooling System. International Communications in Heat and Mass Transfer, 53. pp. 195-202. ISSN 0735-1933. (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) A Review of Forced Convection Heat Transfer Enhancement and Hydrodynamic Characteristics of a Nanofluid. Renewable and Sustainable Energy Reviews, 29. pp. 734-743. ISSN 1364-0321. (Published)
K., Kadirgama and M., Yogeswaran and S. , Thiruchelvam and M. M., Rahman (2014) Prediction of Grinding Machinability when Grind P20 Tool Steel Using Water Based Zno Nano-Coolant. Jokull Journal, 66 (5). pp. 1-15. ISSN 0449-0576. (Published)
K., Kadirgama and R. A., Bakar and Hussein, Adnan M. (2014) Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System. Case Studies in Thermal Engineering, 2. pp. 50-61. ISSN 2214-157X. (Published)
K. Y., Kor and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Hassan, Ibrahim and M., Mahendran (2014) Simulation Model to Assess Electrical Power Generation from Tidal Basin in Coastal Area Malaysia. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .
Kamal, M. and M. M., Rahman (2014) Fatigue Life Estimation Models: A State of the Art. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1599-1608. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Kamal, M. and M. M., Rahman (2014) Finite Element-Based Fatigue Behaviour of Springs in Automobile Suspension. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1910-1919. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2014) An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1695-1708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Heat Transfer Performance of Titanium Oxide in Ethylene Glycol Based Nanofluids under Transition Flow. Applied Mechanics and Materials, 660. pp. 684-688. ISSN 1662-7482. (Published)
Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2014) Thermal Conductivity Enhancement of Aluminium Oxide Nanofluid in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 730-734. ISSN 1662-7482. (Published)
Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1782-1792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Neural Network Modeling and Analysis for Surface Characteristics in Electrical Discharge Machining. Procedia Engineering, 90. pp. 631-636. ISSN 1877-7058. (Published)
L. H., Shah and N. F., Zainal Ariffin (2014) Process Parameter Optimization for Friction Stir Welding of AA6061 and AA7075. In: 10th International Friction Stir Welding Symposium , 20-22 Mei 2014 , Beijing, China. pp. 1-7.. (Unpublished)
L. H., Shah and N. F., Zainal Ariffin and A. R., Razali (2014) Application of Taguchi Optimization Technique on Dissimilar AA6061-AA7075 Friction Stir Welding. In: World Virtual Conference on Advanced Research in Materials & Engineering Applications , 22-26 September 2014 , Kuala Lumpur. . (Unpublished)
L. Y., Tan and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and F., Basrawi and Azim, Arshad (2014) Simulation Model to Assess Tidal Potential Energy in East Coast of Malaysia by using GIS. In: The 4th International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMIEJS 2014) , 25-26 June 2014 , Penang, Malaysia. .
M., Adnan Hussein and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2014) Heat Transfer Augmentation of a Car Radiator using Nanofluids. Heat and Mass Transfer, 50 (11). pp. 1553-1561. ISSN 0947-7411(Print); 1432-1181(Online). (Published)
M., Ishak and Amir, Aziz and Asnul Hadi, Ahmad (2014) Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy. International Review on Modelling and Simulations (I.R.E.M.O.S), 8 (1). pp. 289-295. ISSN 1974-9821. (Published)
M., Ishak and L. H., Shah (2014) Review of Research Progress on Aluminum-Steel Dissimilar Welding. Materials and Manufacturing Processes. pp. 1-24. ISSN 1042-6914 (print); 1532-2475 (online). (Published)
M., Ishak and L. H., Shah and I. S. R., Aisha and W., Hafizi and M. R., Islam (2014) Study of Resistance Spot Welding Between AISI 301 Stainless Steel and AISI 1020 Carbon Steel Dissimilar Alloys. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 793-806. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M., Ishak and M. Rafiqul, Islam (2014) Weldability of A7075-T651 and AZ31B Dissimilar Alloys by MIG Welding Method Based on Welding Appearances. Journal of Physics: Conference series, 495. pp. 1-8. ISSN 1742-6588 (print); 1742-6596 (online). (Published)
M., Ishak and M. Rafiqul, Islam and Toshiyuki, Sawa (2014) GMA Spot Welding of A7075-T651/AZ31B Dissimilar Alloys using Stainless Steel Filler. Materials and Manufacturing Processes, 29 (8). pp. 980-987. ISSN 1042-6914 (print), 1532-2475 (online). (Published)
M., Ishak and Thet, Thet Mon and Noriah, Bidin and Yap, Tze Chuen (2014) On Generation of Micro-Feature on Silicon with an Industrial Laser. Materials Science Forum, 773 - . pp. 661-669. ISSN 0255-5476. (Published)
M., Puvanesan and M. M., Rahman and Najiha, M. S. and K., Kadirgama (2014) Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1538-1549. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. F., Ghazali and Priyandoko, Gigih and Wan Sofian, Wan Hamat and Tan, Wan Ching (2014) Plastic Pipe Crack Detection Using Ultrasonic Guided Wave Method. In: 8th Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014) , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 1-5..
M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani and N. M. Z., Nik Mohamed and Ahmad Nasser, Mohd Rose (2014) Optimization of Multi-Pass Pocket Milling Parameter using Ant Colony Optimization. Advanced Materials Research, 1043. pp. 65-70. ISSN 1022-6680 (print); 1662-8985 (online). (Published)
M. H., Firdaus and A. R., Yusoff and Muhammad Hatifi, Mansor and Mohd Tarmizy, Che Kar (2014) Parametric Study of an Electromagnetic Energy Harvester. Applied Mechanics and Materials, 471. pp. 113-118. ISSN 1662-7482. (Published)
M. H. A., Rasid and M. S. M., Sani (2014) Experimental study on noise mapping of split unit air conditioner system. Auto Inexss (8). ISSN 1985-8434
M. I., Rafiquel and M., Ishak (2014) Modelling and Optimizing of Joint’s Fracture Toughness between A7075-T651 and AZ31B Dissimilar Alloys Welded by GMA Spot Welding Method. Applied Mechanics and Materials, 663. pp. 281-286. ISSN 1662-7482. (Published)
M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat (2014) Heat Transfer Augmentation in the Straight Channel by Using Nanofluids. Case Studies in Thermal Engineering, 3. pp. 59-67. ISSN 2214-157X. (Published)
M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) MILD Combustion: The Future for Lean and Clean Combustion Technology. International Review of Mechanical Engineering (IREME), 8 (1). pp. 251-257. ISSN 1970-8734 (print); 1970-8742 (cd-rom). (Published)
M. M., Rahman and Ibrahim, Tamir K. (2014) Effect of the Compression Ratio on the Performance of Different Strategies of the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1747-1757. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. M., Rahman and K., Kadirgama (2014) Performance of Water-Based Zinc Oxide Nanoparticle Coolant during Abrasive Grinding of Ductile Cast Iron. Journal of Nanoparticles, 2014. pp. 1-7. (Published)
M. M., Rahman and Thamir K., Ibrahim (2014) Effective Parameters on Performance of Multipressure Combined Cycle Power Plants. Advances in Mechanical Engineering, 2014. pp. 1-13. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)
M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thickness Using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thicknesses using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2014) The Simulation of Biogas Combustion in a Mild Burner. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 995-1013. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Air Fuel Ratio Study For Mixture Of Biogas And Hydrogen On Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2144-2154. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Effect Of Air-Fuel Ratio on Temperature Distribution and Pollutants For Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1980-1992. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. M., Rahman and K., Kadirgama and Azma Salwani, Ab Aziz (2014) Artificial neural network modeling of grinding of ductile cast iron using water based sio2 nanocoolant. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1649-1661. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. R. M., Akramin and Ahmad Kamal, Ariffin and Kikuchi, Masanori and S., Abdullah and N., Nik Abdullah (2014) Fatigue Crack Growth Analysis of Semielliptical Surface Crack. Applied Mechanics and Materials, 471. pp. 293-298. ISSN 1662-7482. (Published)
M. R. M., Rejab and W. A. W., Hassan and J. P., Siregar and Bachtiar, Dandi (2014) Specific Properties of Novel Two-Dimensional Square Honeycomb Composite Structures. Applied Mechanics and Materials, 695. pp. 694-698. ISSN 1662-7482. (Published)
M. S. M., Sani and Izzuddin, Zaman and Muhammad, Mohamed Salleh and Maznan, Ismon and Bukhari, Manshoor and Amir, Khalid and Sherif, Araby (2014) Vibration Attenuation of Plate using Multiple Vibration Absorbers. In: Proceedings of the 4th International Conference on Production, Energy and Reliability (ICPER2014) , 3-5 June 2014 , Kuala Lumpur Convention Centre, Kuala Lumpur. pp. 1-6..
M. S. M., Sani and M. H. A., Rasid (2014) Experimental Study on Noise Mapping of Split Unit Air Condition System. Auto Inexss, 2014 (8). pp. 15-20. ISSN 1985-8434
Mahendran, Moorthy and Tanti Zanariah, Shamshir Ali and Shahrani, Anuar and R. A., Bakar (2014) The Efficiency Enhancement on the Direct Flow Evacuated Tube Solar Collector Using Water-Based Titanium Oxide Nanofluids. Applied Mechanics and Materials, 465-46. pp. 308-315. ISSN 1662-7482. (Published)
Makeen, Mohd Amin and M. F., Ghazali (2014) Leakage Detection in Galvanized Iron (GI) Pipelines Using Ensemble Empirical Mode Decomposition Analysis (EEMD). In: International Conference on Mathemathics, Engineering & Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Pulau Pinang. pp. 1-5.. (Unpublished)
Makeen, Mohd Amin and Mohd Fairusham, Ghazali and Abdul, malik and Nurul Fatiehah, Adnan (2014) Leak Detection in Pipeline Using Wavelet and Ceptrum Analysis. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 352-355. ISSN 1991-8178(print); 2309-8414(online). (Published)
Mas Ayu, Hassan and Engku Mohammad, Nazim and Sudin, Izman and Ourdjini, Ali and Tuty, Abu Bakar (2014) Adhesion Strength of HFCVD Diamond Coating on WC Substrate Seeded with Diamond and Different Ratios of SiC Powders. Advanced Materials Research, 845. pp. 467-471. ISSN 1662-8985. (Published)
Mas Ayu, Hassan and Mohd Faiz, Mohd Yusoff and Mohammed Rafiq, Abdul Kadir and Nida, Iqbal and Rafaqat, Hussain (2014) Dipcoating of Poly (E-caprolactone)/hydroxyapatite Composite Coating on Ti6Al4V for Enhanced Corrosion Protection. Surface and Coatings Technology, 245. pp. 102-107. ISSN 0257-8972. (Published)
Md. Ashikur, Rahman Khan and M. M., Rahman (2014) Surface Study in a Non-conventional (Electrical Discharge Machining) Process for Grade 6 Titanium Material. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 89-93. ISSN 0127-9696 (print); 2180-3722 (online). (Published)
Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Mohd Imran, Yusof and Mohd Fadhlan, Yusof (2014) Utilization of the Acoustic Emission Technology in Bone Tissues. Applied Mechanics and Materials, 471. pp. 218-222. ISSN 1662-7482. (Published)
Mohamad Zairi, Baharom and Wan Nazdah, Wan Hussin (2014) Scheduling Analysis for Job Sequencing in Veneer Lamination Line. In: International Conference on Information Management and Industrial Engineering (ICII 2014) , 22-23 August 2014 , Dubai. . (Unpublished)
Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Mohd Toff, Mohd Radzi (2014) An Investigation of Phase Crystallinity in Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. Key Engineering Materials, 611 (612). pp. 1601-1607. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Mohd Azam, Musa and A. R., Razali and Nazrul Idzham, Kasim (2014) Grain and Feature Size Effect on Material Behavior for Micro-Sheet-Forming. Applied Mechanics and Materials, 680. pp. 77-80. ISSN 1662-7482. (Published)
Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff (2014) Bouc-Wen Model Parameter Identification for a MR Fluid Damper Using Particle Swarm Optimization. Advanced Materials Research, 903. pp. 279-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2014) Optimizing Hysteresis Parameters Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10.. (Unpublished)
Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali and M. R., Islam (2014) Analysis of an Air Borne Acoustic Signatures from Welding Process Using Empirical Mode Decomposition. Advanced Materials Research, 889 (890). pp. 770-775. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Mutalib, Leman and Amir, Khalid and Noreffendy, Tamaldin (2014) Experimental Investigation on Biodiesel-Ethanol-Diesel Blends Operating with a Diesel Engine. Applied Mechanics and Materials, 465-46. pp. 221-225. ISSN 1662-7482. (Published)
Mohd Hafizil, Mat Yasin and Talal, Yusaf and R., Mamat and Ahmad Fitri, Yusop (2014) Characterization of A Diesel Engine Operating with A Small Proportion of Methanol as a Fuel Additive in Biodiesel Blend. Applied Energy, 114. pp. 865-873. ISSN 0306-2619. (Published)
Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2014) The Effects of Solidification on the Microstructure and Mechanical Properties of Modified Ductile Ni-Resist Iron with a High Manganese Content. Materials Science and Engineering: A, 597. pp. 395-407. ISSN 0921-5093. (Published)
Mohd Shamil, Shaari (2014) Fatigue life analysis of natural fibres. Masters thesis, Northern Illinois University (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2014) Study of Effect of Thermal Diffusivity on Ground Temperature for Malaysian Climate. Applied Mechanics and Materials, 554. pp. 301-306. ISSN 1662-7482. (Published)
Mohd Yusri, Saidin and Tsuchiya, Kazuyoshi and Inoue, Takehiko and Kajiwara, Kagemasa and Kimura, Minoru (2014) Qualitative Measurement of Pain by Analysing the Salivary Alpha Amylase. Precision Engineering, 38 (2). 257-260 . ISSN 0141-6359. (Published)
Muhammad Syahir, Ali and M. T., Musthafah and A. M., Mohd Shafie and R. A., Bakar (2014) Simulation of Single Cylinder Engine Fuel with Alternative Fuel by Using Available Software. International Review of Mechanical Engineering (IREME), 8 (4). pp. 798-802. ISSN 1970-8734. (Published)
N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2014) Viscosity of Aluminium Oxide (Al2O3) Nanoparticle Dispersed in Ethylene Glycol. Applied Mechanics and Materials, 660. pp. 735-739. ISSN 1662-7482. (Published)
N. A. A., Sathari and L. H., Shah and A. R., Razali (2014) Investigation of Single-pass Double-pass Techniques on Friction Stir Welding of Aluminium. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1053-1061. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2014) Study on Dissimilar Aluminium Alloys of AA7075 and AA6061 using Friction Stir Welding. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. pp. 1-8.. (Unpublished)
N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and Abdul, Malik and Akmal, Ariffin (2014) Leak Detection in MDPE Gas Pipeline using Dual-Tree Complex Wavelet Transform. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 356-360. ISSN 1991-8178. (Published)
N. M. M., Ammar and Nurul Suraya, Azahari and Ahmad Alif, Ahmad Adam (2014) Prediction of Particle Impact on an Archimedes Screw Runner Blade for Micro Hydro Turbine. Applied Mechanics and Materials, 465-46. pp. 552-556. ISSN 1662-7482. (Published)
N. M. M., Ammar and S. M., Mustaqim and N. M., Nadzir (2014) Effect of Highly Pressurized Dispersion Arc Nozzle on Breakup of Oil Leakage in Offshore. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 8 (5). pp. 1051-1056. (Published)
N. M. M., Ammar and S. M., Mustaqim and N. M., Nadzir (2014) Effect of Highly Pressurized Dispersion Arc Nozzle on Breakup of Oil Leakage in Offshore. In: International Conference on Automotive and Mechanical Engineering , 29-30 May 2014 , Tokyo, Japan. .
Najiha, M. S. and M. M., Rahman (2014) A computational fluid dynamics analysis of single and three nozzles minimum quantity lubricant flow for milling. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1891-1900. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Nasrul Hadi, Johari and Jegatis, Balaiyah and Zulkifli, Ahmad (2014) Effect of Chronic Obstructive Pulmonary Disease on Airflow Motion Using Computational Fluid Dynamics Analysis. In: International Conference on Computer, Communications, and Control Technology , 2-4 September 2014 , Langkawi, Kedah. pp. 249-254..
Nazrul Idzham, Kasim and A. R., Razali and Mohd Azam, Musa (2014) Positional Accuracy Based on a Load Identification Optimization on a Linear Motor Sheet Forming Feeder. Applied Mechanics and Materials, 680. pp. 311-314. ISSN 1662-7482. (Published)
Nik Rosli, Abdullah and Nafis Syabil, Shahruddin and R., Mamat and Aman Mohd, Ihsan Mamat and Aminuddin, Zulkifli (2014) Effects of Air Intake Pressure to the Engine Performance, Fuel Economy and Exhaust Emissions on a Small Gasoline Engine. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 949-958. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Norhaida, Ab Razak and Md Mustafizur, Rahman and Kadirgama, Kumaran (2014) Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (1). pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and R., Mamat (2014) Analysis of Diesel Engine Performance Fueled with Waste Cooking Oil. Applied Mechanics and Materials, 465-46. pp. 418-422. ISSN 1662-7482. (Published)
Nur Azhani, Abd Razak and Asmara, Y. P. and Mohamad Khairuazlan, Kamaruzaman (2014) Influences of H2SO4 and NaCl Concentrations on Stress Corrosion Cracking of AISI 304 Stainless Steel. Advanced Materials Research, 893. pp. 410-414. ISSN 1662-8985. (Published)
Nur Azhani, Abd Razak and Shing Shian, Ng (2014) Investigation of Effects of Mig Welding on Corrosion Behaviour of AISI 1010 Carbon Steel. Journal of Mechanical Engineering and Sciences (JMES) , 75. pp. 1168-1178. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Nur Fauziah, Jaharudin and Abdul Adam, Abdullah and Ahmad Fitri, Yusop and R., Mamat and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah (2014) Study on Particulate Matter (PM) Emissions of Diesel Engine Using Palm Oil Methyl Ester. Applied Mechanics and Materials, 465 (466). pp. 433-437. ISSN 1662-7482. (Published)
Nuraini, Aziz and S. N., Aqida (2014) Hot Press Forming of 22MnB5 Steel Using Full Factorial Design of Experiment (DOE). Advanced Materials Research, 1024. pp. 243-246. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Characterization of Blended Biodiesel Fuel Properties with Small Portion of Butanol as a Fuel Additive. Applied Mechanics and Materials, 465-46. pp. 137-141. ISSN 1662-7482. (Published)
Obed M., Ali and R., Mamat and C. K. M., Faizal (2014) Influence of 1-Butanol Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. Applied Mechanics and Materials, 465-46. pp. 130-136. ISSN 1662-7482. (Published)
Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2014) Characteristic of Blended Fuel Properties and Engine Cycle To-Cycle Variations with Butanol Additive. In: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang. pp. 1-12..
Obed M., Ali and Talal, Yusaf and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2014) Influence of Chemical Blends on Palm Oil Methyl Esters’ Cold Flow Properties and Fuel Characteristics. Energies, 7 (7). pp. 4364-4380. ISSN 1996-1073 . (Published)
R., Mamat and Bundschuh, Jochen and Yusaf, Talal and Maity, Jyoti Prakash and Nelson, Emily and Indra Mahlia, T.M. (2014) Algae-biomass for Fuel, Electricity and Agriculture. Energy, 78. pp. 1-3. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)
R. A., Bakar and A. M., Mohd Shafie and Musthafah, M. T. and M. S., Ali (2014) Intake Analysis On Four-Stroke Engine Using CFD. In: 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-11.. (Unpublished)
Rashidi, M. M. and Mohd Hasbullah, Idris (2014) The Effect Of Solidification On The Microstructure And Mechanical Properties Of Modified Ductile Ni-Resist Iron With A High Manganese Content. Materials Science and Engineering: A, 597. pp. 305-407. ISSN 0921-5093. (Published)
Rasidi, Ibrahim and Abdul Halim, Erween and S. A., Che Ghani and A. A., Ibrahim and N. A., Maskam (2014) The Effect on the Application of Coolant and Ultrasonic Vibration Assisted Micro Milling on Machining Performance. Applied Mechanics and Materials, 660. pp. 65-69. ISSN 1662-7482. (Published)
Rosdi, Daud and Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and A., Shah and Mohd Faiz, Mohd Yusoff and M. W., Shamsiah and T. M., Yong and T., Kamarul (2014) Influence of Carbon Concentrations in Reducing Co and Cr Ions Release in Cobalt Based Implant: A Preliminary Report. Advanced Materials Research, 845. pp. 462-466. ISSN 1662-8985. (Published)
Rosmazi, Rosli and Musa, Mailah and Priyandoko, Gigih (2014) Active Suspension System for Passenger Vehicle using Active Force Control with Iterative Learning Algorithm. WSEAS Transactions on Systems and Control, 9. pp. 120-129. ISSN 1991-8763 (print); 2224-2856 (online). (Published)
Rosmazi, Rosli and Musa, Mailah and Priyandoko, Gigih (2014) Hardware-in-the-Loop Simulation for Active Force Control with Iterative Learning Applied to an Active Vehicle Suspension System. Applied Mechanics and Materials, 465-46. pp. 801-805. ISSN 1662-7482. (Published)
S., Karimi and B., Ghobadian and G., Najafi and A., Nikian and R., Mamat (2014) Effect of Operating Parameters on Ethanol–Water Vacuum Separation in an Ethanol Dehydration Apparatus and Process Modeling with ANN. Chemical Product and Process Modeling, 9 (2). pp. 179-191. ISSN 2194-6159 (print); 1934-2659 (online). (Published)
S. N., Aqida and L. H., Shah and Naher, S. and Brabazon, D. (2014) Rapid Solidification Processing and Bulk Metallic Glass Casting. In: Comprehensive Materials Processing. Casting, Semi-Solid Forming and Hot Metal Forming, 5 . Elsevier Ltd, Singapore, pp. 69-88. ISBN 9780080965321
S. N., Aqida and Mohamed Reza Zalani, Mohamed Suffian and Mohd Toff, Mohd Radzi and Brabazon, D. (2014) Surface Morphology of Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating. In: 17th Annual Esaform Conference on Material Forming , 7-9 May 2014 , Dipoli Congress Centre, Espoo, Finland. pp. 1-8..
Salwani, Mohd Salleh and B. B., Sahari and A., Ali and A. A., Nuraini (2014) Energy Absorption of Partially Filled Side Member Subjected to Oblique Crash. Applied Mechanics and Materials, 564. pp. 38-41. ISSN 1662-7482. (Published)
Salwani, Mohd Salleh and B. B., Sahari and Aidy, Ali and A. A., Nuraini (2014) The Effect of Automotive Side Member Filling on Car Frontal Impact Performance. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 873-880. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Salwani, Mohd Salleh and Sahari, B. B. and Aidy, Ali and Nuraini, A. A. (2014) Assessment Of Head Injury Criteria And Chest Severity Index For Frontal Impact. pp. 1-7. (Published)
Siregar, J. P. and Cionita, Tezara and Nor Mariah, Adam and Juliana, Jalaludin and Mariani, Mansor (2014) Measurement of Indoor Air Quality Parameters in Daycare Centres in Kuala Lumpur Malaysia. Applied Mechanics and Materials, 564. pp. 245-249. ISSN 1662-7482. (Published)
Siti Haryani, Tomadi and J. A., Ghani and C. H., Che Haron and M. S., Kasim and A. R., Daud (2014) Optimization of Cutting Parameters of Multiple Performance Characteristics in End Milling of AlSi/AIN MMC - Taguchi Method and Grey Relational Analysis. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 33-40. ISSN 0127-9696 (print); 2180-3722 (online). (Published)
Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Astuty, Amrin (2014) Effect Of Solder Volume on Interfacial Reaction Between SAC405 Solders and EN(B)EPIG Surface Finish. Advanced Materials Research, 845. pp. 76-80. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Suziyana, Mat Dahan and Mohd Yusof, Taib and Ahmad Nazif, Noor Kamar and Khairul Anwar, Hamzah (2014) Determination and Analysis of Obstacles of Innovation in Malaysian Food Processing SMEs. In: 2nd International Conference on Innovation Challenges in Multidisciplinary Research & Practice (ICMRP 2014 ) , 17-18 December 2014 , Kuala Lumpur. pp. 1-8., 4 (8). ISSN 2277-3754 (Unpublished)
Syifak Izhar, Hisham and Jasni, Mohamad Zain and Nurul Wahidah, Arshad and Siau-Chuin, Liew and Nasrul Hadi, Johari and Gran, Badshah (2014) Authentication System for Medical Images Using Hilbert Numbering. In: International Conference on Computer, Communications, and Control Technology , 2-4 September 2014 , Langkawi, Kedah. pp. 198-202..
Tahriri, Farzad and Siti Zawiah, Md Dawal and Zahari, Taha (2014) Multiobjective Fuzzy Mixed Assembly Line Sequencing Optimization Model. Journal of Applied Mathematics. pp. 1-19. ISSN 1110-757X (print); 1687-0042 (online). (Published)
Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An Experimental Study of Heat Transfer and Friction Factor Characteristics of Finned Flat Tube Banks with In-Line Tubes Configurations. Applied Mechanics and Materials, 564. pp. 197-203. ISSN 1662-7482. (Published)
Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An experimental study of air flow and heat transfer over in-line flat tube bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Tahseen, Tahseen Ahmad and M. M., Rahman (2014) Heat Transfer and Pressure Drop Prediction In An In-Line Flat Tube Bundle by Radial Basis Function Network. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2003-2015. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2014) An Experimental Study of Air Flow and Heat Transfer Over In-Line Flat Tube Bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Tahseen , T.A. and M., Ishak and M. M., Rahman (2014) Performance predictions of laminar heat transfer and pressure drop in an in-line flat tube bundle using an adaptive neuro-fuzzy inference system (ANFIS) model. International Communications in Heat and Mass Transfer, 50. pp. 85-97. ISSN 0735-1933. (Published)
Tahseen Ahmad, Tahseen (2014) Optimal geometric arrangement of unfinned and finned flat tube heat exchangers under laminar forced convection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Study on Potential Waste Insulating Material Properties in Water for Thermal Storage Application. Advanced Materials Research, 903. pp. 139-144. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2014) Investigation of Excessive Material on Insulating Properties Using Different Heat Transfer Fluid for Thermal Energy Storage Development. Journal of Energy and Power Engineering, 8 (10). pp. 1673-1679. ISSN 1934-8975 (print); 1934-8983 (online). (Published)
Tezara, C. and Juliana, Jalaludin and Nor Mariah, Adam and Siregar, J. P. (2014) Assessment of Children’s Health and Indoor Air Contaminants of Day Care Centre in Industrial Area. Iranian J Publ Health, 43 (3). pp. 81-88. (Published)
Ummu Kulthum, Jamaludin and Docherty, Paul D. and Preiser, Jean-Charles (2014) Incretin Effects and Enteral Feed Transitions. In: Diet and Nutrition in Critical Care. Springer, New York, pp. 1-14. ISBN 978-1-4614-8503-2 (online)
Wan Anuar, Wan Hassan (2014) Numerical simulation on the effect of anastomosis and stenosis upon radiocephalic arteriovenous fistula. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).
Wan Azhar, Wan Yusoff and Nur Shafiza Afzan, Sharif and Julie J., Mohamed and Hutagalung, Sabar Derita and Zainal Arifin, Ahmad and Mohd Zulkifly, Abdullah and Hasmaliza, Mohamad (2014) The Effect of Sintering Conditions on the Microstructure and Electrical Properties of Pb(Zr0.52Ti0.48)O3 Ceramic. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 901-906. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Yap, H. T. and Ong, Z. C. and Chong, W. T. and Kong, K. K. and Khoo, S. Y. and Z., Ismail and Abdul Ghaffar, Abdul Rahman (2014) Design optimisation of shroud-augmented dual-rotor exhaust air energy recovery wind turbine generator using hybrid non-destructive evaluation approach. In: 6th International Conference on Applied Energy, ICAE 2014 , 30 May - 2 June 2014 , National Taiwan University of Science and TechnologyTaipei, Taiwan. pp. 1266-1269., 61. ISSN 1876-6102
Yap, Hwa Jen and Zahari, Taha and Siti Zawiah, Md Dawal and Chang, Siow Wee (2014) Virtual reality based support system for layout planning and programming of an industrial robotic work cell. PLoS ONE, 9 (10). pp. 1-15. ISSN 1932-6203. (Published)
Zahari, Taha and Farzad, Tahriri and Siti Zawiah, Md Dawal (2014) Fuzzy Mixed Assembly Line Sequencing and Scheduling Optimization Model Using Multiobjective Dynamic Fuzzy GA. The Scientific World Journal, 2014. pp. 1-20. ISSN 2356-6140 (print); 1537-744X (online). (Published)
Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md. Dawal (2014) Axiomatic Design Principles in Analysing the Ergonomics Design Parameter of a Virtual Environment. International Journal of Industrial Ergonomics, 44 (3). pp. 368-373. ISSN 0169-8141. (Published)
Zainal Ariffin, Selamat and A. R., Yusoff and M. M., Rahman (2014) The Effect of Various Diameters Orifice Nozzle Coolant on Surface Roughness Performance in CNC Turning. Advanced Materials Research, 903. pp. 169-173. ISSN 1022-6680 (print), 1662-8985 (online). (Published)
Zainal Ariffin, Selamat and Razali, M. and A. R., Yusoff and M. M., Rahman (2014) Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented. Australian Journal of Basic and Applied Sciences, 8 (4 (Special)). pp. 695-699. ISSN 1991-8178. (Published)
Zamri, Mohamed and Wang, Xu and Ren, He and Liang, Xingyu and Shu, Hongli (2014) A Study of Tyre, Cavity and Rim Coupling Resonance Induced Noise. International Journal Vehicle Noise and Vibration, 10 (12). pp. 25-49. ISSN 1479-1471 (print); 1479-148X (online). (Published)
Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Effect of Nickel addition on Intermetallic Compound Properties of Sn-Cu Solder Alloy. In: International Conference on Electronics Packaging , 23-25 April 2014 , Jepun. .
Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2014) Microstructure Evolution at the Solder Joint During Isothermal Aging. In: IEEE 36th International (IEMT) Electronics Manufacturing Technology Conference (IEMT 2014) , 11-13 November 2014 , Johor Bahru. pp. 1-5.. ISBN 978-1-4799-8209-7
Zulhishamuddin, A. R. and S. N., Aqida (2014) Development High Thermal Conductivity Tool Steel on Hot Press Forming: An Overview. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014) , 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10..
Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Zulkifli, Ahmad@Manap and Ahmad Kamal, Ariffin and Mohd Akramin, Mohd Romlay (2014) Probabilistic Model of Surface Crack on the Lumbar Vertebra. Applied Mechanics and Materials, 471. pp. 299-305. ISSN 1662-7482. (Published)