![UMPSA-IR Logo-UMPSA](/images/IR.jpg)
Items where Division is "Faculty of Manufacturing Engineering" and Year is 2017
![]() | Up a level |
Ahamed, Nizam Uddin and Rabbi, M. F. and Zahari, Taha and K., Sundaraj and Tasriva, Sikandar (2017) The Effects of Rest Interval on Electromyographic Signal on Upper Limb Muscle during Contraction. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 10-13. ISBN 978-981-10-3736-8
Ahamed, Nizam Uddin and Zahari, Taha and Ismail, Mohd Khairuddin and Rabbi, M. F. and Sikandar, Tasriva and Palaniappan, Rajkumar and Ali, Md. Asraf and Rahman, S. A. M. Matiur and Sundaraj, Kenneth (2017) Development of Fuzzy Inference System for Automatic Tea Making. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2016) , 22 October 2016 , Shah Alam, Malaysia.. pp. 196-201.. ISBN 978-1-5090-4186-2 (Published)
Ahmad Faathir, Che Mohd Zulkifli (2017) Building information modelling (BIM) mechanical systems plumbing and HVAC. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Ahmad Fakhri, Ab. Nasir and M. Nordin, A. Rahman and Nashriyah, Mat and A. Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2017) Ficusdeltoidea (Jack) Moraceae Varietal Identification Using Statistical Recognition Approach. World Applied Sciences Journal. pp. 82-88. ISSN 1818-4952. (Published)
Ahmad Rosli, Abdul Manaf and Jiwang, Yan (2017) Improvement of Form Accuracy and Surface Integrity of Si-HDPE Hybrid Micro-Lens Arrays in Press Molding. Precision Engineering, 47. pp. 469-479. ISSN 0141-6359. (Published)
Ahmad Rosli, Abdul Manaf and Sugiyama, Tsunetoshi and Yan, Jiwang (2017) Design and Fabrication of Si-HDPE Hybrid Fresnel Lenses for Infrared Imaging Systems. Optics Express, 25 (2). pp. 1202-1220. ISSN 1094-4087. (Published)
Ahmad Shahrizan, Abdul Ghani and Ahmad Fakhri, Ab. Nasir (2017) Integration of Enhanced Background Filtering and Wavelet Fusion for High Visibility and Detection Rate of Deep Sea Underwater Image of Underwater Vehicle. In: Proceedings of the 5th International Conference on Information and Communication Technology (ICoICT 2017) , 17-19 May 2017 , Melaka, Malaysia. pp. 220-225.. ISBN 978-1-5090-4911-0 (Published)
Ahmad Shahrizan, Abdul Ghani and Mat Isa, Nor Ashidi (2017) Automatic System for Improving Underwater Image Contrast and Color Through Recursive Adaptive Histogram Modification. Computers and Electronics in Agriculture, 141. pp. 181-195. ISSN 0168-1699. (Published)
Aikhuele, Daniel O. and Faiz, Mohd Turan (2017) An intuitionistic fuzzy multi-criteria decision-making method based on an exponential-related function. International Journal of Fuzzy System Applications, 6 (4). pp. 33-46. ISSN 2156-177X. (Published)
Aikhuele, Daniel O. and Odofin, S. M. (2017) A generalized triangular intuitionistic fuzzy geometric averaging operator for decision-making in engineering and management. Information (Switzerland), 8 (3). ISSN 2078-2489. (Published)
Aikhuele, Daniel Osezua (2017) Hybrid-fuzzy techniques with flexibility and attitudinal parameters for supporting early product design and reliability management. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Aikhuele, Daniel Osezua (2017) Interval-valued intuitionistic fuzzy multi-criteria model for design concept selection. Management Science Letters, 7 (9). pp. 457-466. ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)
Aikhuele, Daniel Osezua (2017) Systematic model for lean product development implementation in an automotive related company. Management Science Letters, 7 (7). ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)
Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Exponential-Related Function for Decision-Making In Engineering and Management. Open Engineering, 7 (1). pp. 153-160. ISSN 2081‐9927. (Published)
Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) Extended TOPSIS Model for Solving Multi-Attribute Decision Making Problems in Engineering. Decision Science Letters, 6. pp. 365-376. ISSN 1929-5804 (Print); 1929-5812 (Online). (Published)
Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) An Integrated Fuzzy Dephi and Interval-Valued Intuitionistic Fuzzy M-Topsis Model for Design Concept Selection. Pakistan Journal of Statistics and Operation Research, 13 (2). pp. 425-438. ISSN 2220-5810. (Published)
Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2017) A Subjective and Objective Fuzzy-Based Analytical Hierarchy Process Model for Prioritization of Lean Product Development Practices. Management Science Letters, 7 (6). pp. 297-310. ISSN 1923-9335 (Print); 1923-9343 (Online). (Published)
Aikhuele, Daniel Osezua and Faiz, Mohd Turan and Odofin, S. M. and Ansah, Richard Hannis (2017) Interval-Valued Intuitionistic Fuzzy Topsis-Based Model For Troubleshooting Marine Diesel Engine Auxiliary System. International Journal Maritime Engineering, 159 (Pt. A1). pp. 107-114. ISSN 1479-8751. (Published)
Aikhuele, Daniel Osezua and Sorooshian, Shahryar and Ansah, Richard Hannis and Faiz, Mohd Turan (2017) Application Of Intuitionistic Fuzzy Topsis Model For Troubleshooting An Offshore Patrol Boat Engine. Polish Maritime Research, 24 (2). pp. 68-76. ISSN 2083-7429. (Published)
Ali, Mohammed A. H. and Musa, Mailah and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof (2017) An Intelligent Robust Control of Wheeled Mobile Robot in Restricted Environment. International Journal of Control Systems and Robotics, 2. pp. 6-11. ISSN 2367-8917. (Published)
Ali, Mohammed A. H. and Wan Azhar, Wan Yusoff and Zamzuri, Hamedon and Zulkifli, Md. Yusof and Musa, Mailah (2017) Global Mobile Robot Path Planning using Laser Simulator. In: International Symposium on Robotics and Manufacturing Automation (ROMA) 2016 , 25-27 September 2016 , Ipoh, Perak. . ISBN 9781509009282 (Published)
Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) A Review on Ionic Liquids as Sustainable Lubricants in Manufacturing and Engineering: Recent Research, Performance, and Applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526. (Published)
Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Syahrullail, Samion (2017) Tribological Performance of Modified Jatropha Oil Containing Oil-Miscible Ionic Liquid for Machining Applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1976-3824. (Published)
Anwar, P. P. Abdul Majeed and Zahari, Taha and A. F. Z., Abidin and Muhammad Aizzat, Zakaria and Ismail, Mohd Khairuddin and M. A. M., Razman and Z., Mohamed (2017) The Control of a Lower Limb Exoskeleton for Gait Rehabilitation: A Hybrid Active Force Control Approach. In: IEEE International Symposium on Robotics and Intelligent Sensors, IRIS 2016 , 17- 20 December 2016 , Hosei UniversityTokyo; Japan. pp. 183-190., 105. ISSN 1877-0509 (Published)
Anwar, P. P. Abdul Majeed and Zahari, Taha and Ismail, Mohd Khairuddin and Mohd Yashim, Wong Paul Tze and Muhammad Amirul, Abdullah and Mohd Azraai, M. Razman (2017) The Control of an Upper-Limb Exoskeleton by Means of a Particle Swarm Optimised Active Force Control for Motor Recovery. In: IFMBE Proceedings: 3rd International Conference on Movement, Health & Exercise (MoHE 2016) , 28-30 September 2016 , Melaka, Malaysia. pp. 56-62., 58. ISBN 978-981-10-3737-5 (Published)
Azlan, Ahmad Tajuddin (2017) Solving gate allocation problem (AGAP) using distance-evaluated particle swarm optimization (DEPSO). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Azmir, Azhari and Zamzuri, Hamedon and Mebrahitom, A. (2017) A study on Wire Breakage in Electrical Discharge Machining of Polyurethane Foam. In: Materials Today: Proceedings, 6th International Conference of Materials Processing and Characterization (ICMPC 2016) , 5-7 December 2016 , Hyderabad, India. pp. 5222-5227., 4 (4). ISSN 2214-7853 (Published)
B., Norhafzan and S. N., Aqida and F., Mifthal and A. R., Zulhishamuddin and I., Ismail (2017) Effect of heating time on hardness properties of laser clad gray cast iron surface. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Suparmaniam, M. V. and Mohd Yazid, Abu (2017) Platooning Strategy of Mobile Robot: Simulation and Experiment. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01060). ISSN 2261-236X (Published)
Bagaber, Salem Abdullah and A. R., Yusoff (2017) Effect of Cutting Parameters on Sustainable Machining Performance of Coated Carbide Tool in Dry Turning Process of Stainless Steel 316. In: AIP Conference Proceedings: Green And Sustainable Technology: 2nd International Symposium (ISGST2017) , 10–13 January 2017 , Perak, Malaysia. pp. 1-8., 1828 (1). ISBN 978-0-7354-1496-9 (Published)
Bagaber, Salem Abdullah and A. R., Yusoff (2017) Multi-Objective Optimization of Cutting Parameters to Minimize Power Consumption in Dry Turning of Stainless Steel 316. Journal of Cleaner Production, 157. pp. 30-46. ISSN 0959-6526 (print), 1879-1786 (online). (Published)
Bagaber, Salem Abdullah and A. R., Yusoff (2017) A comparative study on performance of CBN inserts when turning steel under dry and wet conditions. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-11., 257 (012041). ISSN 1757-899X (Published)
Bagaber, Salem Abdullah and Abdullahi, Tijjani and Zawati, Harun and Daib, Nateq and Mohd Hafiz Dzarfan, Othman (2017) The Effect of Lanthanum Addition on the Microstructure and Mechanical Properties of A390 Aluminium Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4559-4564. ISSN 1319-8025 (print); 2191-4281 (online). (Published)
Chang, Yong En (2017) Control of wheeled mobile robot in restricted environment. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Chee, Fang Lit (2017) Development of robot kit for visually impaired. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Cheow, Shek Hong (2017) Development of electronic kit for respiratory for detecting asthma. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Chowdhury, M. A. and Debnath, U. K. and Mia, M. S. and Nuruzzaman, D. M. (2017) Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix. International Journal of Materials Engineering Innovation, 8 (3-4). pp. 159-172. ISSN 1757-2754. (Published)
Chowdhury, M. A. and Debnath, U. K. and Nuruzzaman, D. M. and Islam, Monirul (2017) Erosion of Mild Steel for Engineering Design and Applications. Journal of Bio- and Tribo-Corrosion, 3 (3). pp. 1-17. ISSN 2198-4220(print); 2198-4239(online). (Published)
Chowdhury, Mohammad Asaduzzaman and Debnath, Uttam Kumar and Nuruzzaman, D. M. and Islam, Md. Monirul (2017) Study of Erosive Surface Characterization of Copper Alloys under Different Test Conditions. Surfaces and Interfaces, 9. pp. 245-259. ISSN 2468-0230. (Published)
Debnath, U. K. and Chowdhury, M. A. and Nuruzzaman, D. M. (2017) The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 45 (3). pp. 773-787. ISSN 0090-3973. (Published)
F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and N. S. M., Noor and Zahari, Taha and Zulkifli, Ahmad and K., Kadirgama and Nasrul Hadi, Johari and N. H., Mohamed (2017) A Finite Element Analysis of a Recurve Bow Riser using Carbon Fibre Hybrid Composites. Advanced Science Letters, 23 (11). pp. 11467-11470. ISSN 1936-6612. (Published)
Faiz, Mohd Turan and Aikhuele, Daniel Osezua (2017) Need for Reliability Assessment of Parent Product before Redesigning a New Product. Current Science, 112 (1). pp. 10-11. ISSN 0011‐3891. (Published)
Faiz, Mohd Turan and Daniel Osezua, Aikhuele and Kartina, Johan (2017) Reliability information to support decision making for e-Government projects. In: 3rd International Conference on Communication and Information Processing, ICCIP 2017 , 24-26 November 2017 , Tokyo, Japan. pp. 1-6.. ISBN 978-145035365-6 (Published)
Faiz, Mohd Turan and Kartina, Johan and Nik Hisyamudin, Muhd Nor and Badrul, Omar (2017) Sustainability Assessment Model in Product Development. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Faiz, Mohd Turan and Kartina, Johan and Nur Soliha, Sahimi and Nik Hisyamudin, Muhd Nor (2017) Development of Integrated Assessment System for Underground Power Cable Performance: A Case Study. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012020). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Faiz, Mohd Turan and Kartina, Johan and Wan Nurul Syahirah, Wan Lanang (2017) Assessing sustainability in environmental management: a case study in malaysia industry. In: International Research And Innovation Summit (IRIS) , 6-7 May 2017 , Kings Green Malaysia, Melaka. pp. 1-11.. (Published)
Farah Amira, Mohd Ghazali (2017) Design of a thermoforming process for a semi-crystalline polymer. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Jaafar, Abdul Aziz).
Farah Ayuni, Fauzi and Zahari, Taha and Zakri, Ghazalli and Siregar, J. P. and Zulkifli, Ahmad@Manap and K., Kadirgama and Nasrul Hadi, Johari and Danial, Mohamed (2017) Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In: Advances in Human Factors in Sports and Outdoor Recreation. Advances in Intelligent Systems and Computing, 496 . Springer International Publishing, Switzerland, pp. 131-140. ISBN 978-3-319-41952-7
Farah Fazira, Kamaruzaman and Nuruzzaman, Dewan Muhammad and Noor Mazni, Ismail and Zamzuri, Hamedon and Iqbal, AKM Asif and Azmir, Azhari (2017) Microstructure and Properties of Aluminium-Aluminium Oxide Graded Composite Materials. In: 4th Asia Pacific Conference on Manufacturing System and 3rd International Manufacturing Engineering Conference (APCOMS-iMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. . (Unpublished) (Unpublished)
Farah Nadia, Mahfudz (2017) Measurement of contact angle of silicone glue droplet on Cu surface in MEMS Microphone Package. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Fatchurrohman, Nanang and Farhana, N. and Marini, C. D. (2017) Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012032). ISSN 1757-899X (Published)
Fatchurrohman, Nanang and S., Sulaiman (2017) Solidification analysis in permanent mould casting of aluminium alloy LM6 reinforced titanium carbide particulates metal matrix composites. In: 5th International Conference on Engineering and Innovative Materials (ICEIM 2016) , 10-12 September 2016 , Kuala Lumpur. pp. 148-151., 889. ISBN 9783038357704 (Published)
Fatchurrohman, Nanang and S. T., Chia (2017) Performance Of Hybrid Nano-Micro Reinforced Magnesium Composites Brake Calliper: Simulation Approach. In: 4th International Conference On Mechanical Engineering Research (ICMER 2017) , 1-2 August 2017 , Swiss Garden, Kuantan.. pp. 1-7., 257 (1). ISSN 17578981 (Published)
Fazliana, Fauzun and S. N., Aqida and I., Ismail and Norhafzan, Bariman (2017) Micro-Bulges Investigation on Laser Modified Tool Steel Surface. MATEC Web of Conferences, 95. pp. 1-4. ISSN 2261-236X. (Published)
Fook, Wei Jian (2017) Weather station analysis using microcontroller and internet of things (IOT). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Hassan Abdulrssoul, Abdulhadi and S. N., Aqida and M., Ishak and I., Ismail and Ghusoon, Ridha Mohammed (2017) Experimental Investigation of Thermal Fatigue Die Casting Dies by Using Response Surface Modelling. Metals, 7 (6). pp. 1-13. ISSN 2075-4701. (Published)
Hyreil A., Kasdirin and N. M., Yahya and M. S. M., Aras and Tokhi, M. O. (2017) Hybridizing Invasive Weed Optimization with Firefly Algorithm for Unconstrained and Constrained Optimization Problems. Journal of Theoretical and Applied Information Technology, 95 (4). pp. 912-927. ISSN 1992-8645 (print); 817-3195 (online). (Published)
Iqbal, AKM Asif and Arai, Yoshio (2017) Investigation of the Fatigue Crack Propagation Behaviour in the Al Alloy/Hybrid MMC Bi-layer Material. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials and Intelligent Manufacturing (ICMIM 2017) , 21-23 August 2017 , National University of Singapore (NUS), Singapore. pp. 1-6., 244 (012013). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Iqbal, AKM Asif and Arai, Yoshio (2017) Stress analysis on the reinforcement particles of the metal matrix composite by Raman spectroscopy. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Iqbal, AKM Asif and Mei, Jing Lim and Nuruzzaman, D. M. (2017) Effect of compaction load and sintering temperature on the mechanical properties of the Al-SiC nano-composite materials. In: AIP Conference Proceedings: Advanced materials for sustainability and growth: Proceedings of the 3rd Advanced Materials Conference (AMC2016) , 28-29 November 2016 , Langkawi, Malaysia. pp. 1-8., 1901 (030006). ISSN 1551-7616 ISBN 978-0-7354-1589-8 (Published)
Iqbal, AKM Asif and Norul Amierah, Nor Zamani (2017) Effect of reinforcement volume fraction on the mechanical properties of the Al-SiC nanocomposite materials. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. 012168., 226 (012168). ISSN 1757-8981 (Published)
Ismail, Mohd Khairuddin and S. N., Sidek and H., Md Yusof and Baarath, K. and Anwar, P. P. Abdul Majeed (2017) Assistive-as-needed strategy for upper-limb robotic systems: an initial survey. In: 6th International Conference on Mechatronics (ICOM 2017) , 8-9 August 2017 , Gombak, Selangor. pp. 1-6., 260 (1). ISSN 1757-8981 (Published)
Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Mohd Hasnun Ariff, Hassan and F., Basrawi and Ahmad Fitri, Yusop and Wafiuddin, Md Ghazali (2017) Finite element analysis on effects of rim and web thicknesses on root stress of thin-rimmed spur gear with asymmetric web arrangement. In: 3rd Advanced Materials Conference (AMC 2016) , 28 - 29 November 2016 , Bayview Hotel, Langkawi, Kedah. , 1901 (1). ISSN 0094-243X (Published)
Ismail Ali, Abdul Aziz and S. R., Mohd Hanafi and Daing Mohamad Nafiz, Daing Idris and M. R. M., Rejab and Mohd Hasnun Ariff, Hassan and F., Basrawi (2017) Investigating Effects of Rim and Web Thicknesses on Root Stress of Thin-rimmed Spur Gear with Symmetric Web Arrangement. In: MECHANICAL ENGINEERING RESEARCH DAY 2017 , 30 Mac 2017 , Perpustakaan UTEM. pp. 1-2.. ISBN 978-967-0257-88-4 (online) (Published)
Ismed, Iskandar (2017) Competing risk models in reliability systems, an exponetial distribution model with Bayesian analysis approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981 (Published)
Kartina, Johan and Faiz, Mohd Turan (2017) Framework of Systematic Sustainability Assessment Strategy (FSSAS) for Hydroelectric Power Industry in Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. pp. 1-10., 226 (012060). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Kartina, Johan and Faiz, Mohd Turan and Wan Nurul Syahirah, Wan Lanang (2017) Perception of employees of industries in Malaysia on corporate sustainability in affecting customer confidence and loyalty: a case study. In: 3rd and 4th International Engineering Research and Innovation Symposium (IRIS2017) , 6-7 May 2017 , Melaka; Malaysia. pp. 1-12., 226 (1). ISSN 17578981 (Published)
Kong, Zhung Jie (2017) Implementation of swarm intelligence algorithms on mobile robots. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Kushendarsyah, Saptaji (2017) Micro-cutting of biocomplatible materials used for medical applications. , [Research Book Profile: Research Report] (Unpublished)
Lee, Kelvin Khai Meng (2017) Investigation of the mechanical properties of Al-Al2O3-Gr hybrid composite fabricated by powder metallurgy. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Liew, Xiu Qing (2017) Development of table tennis launcher. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Logatarsan, Chandran (2017) Design, fabrication and performance test of die-punch set for powder compaction process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Lum, Shirley (2017) Non-invasive hypertension monitoring in smart furniture. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
M. S. A., Rahim and I., Ismail and S. A., Wahid and S. N., Aqida (2017) Magnetic Field Simulation of a Thermal Conductivity Measurement Instrument for Magnetorheological Fluid. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01061). ISSN 2261-236X (Published)
M. S. A., Rahim and Izwan, Ismail and Choi, S. B. and Azmi, W. H. and S. N., Aqida (2017) Thermal Conductivity Enhancement and Sedimentation Reduction of Magnetorheological Fluids with Nano-Sized Cu and Al Additives. Smart Materials and Structures, 26 (115009). pp. 1-11. ISSN 0964-1726. (Published)
Maisalsadila, Ismail (2017) Study the effect of martensite-ferrite comstituents phase of the plain medium carbon dual phase (DP) steel on the mechanical property and corrosion behavior. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Mebrahitom, A. and Seow , Xiang and Azmir, Azhari and Tamiru, A. (2017) Remaining Tool Life Prediction Based On Force Sensors Signals During End Milling Of Stavax ESR Tool Steel. In: International Mechanical Engineering Congress and Exposition (IMECE) , 3-9 November 2017 , Swiss Garden Hotel, Balok, Kuantan, Pahang. pp. 1-7.. ISBN 9780791858356 (Published)
Mia, Md. Shahin and Chowdhury, Mohammad Asaduzzaman and Rahaman, Mohammad Lutfar and Nuruzzaman, D. M. and Das, Suman and Debnath, Uttam Kumar (2017) Friction and Wear of Non-Ferrous Materials Under Artificially Created Vibration for Machine Design. International Journal of Materials Engineering Innovation, 8 (2). pp. 96-121. ISSN 1757-2754. (Published)
Mohammad Izzad, Mohammad Idzlaluddin (2017) Threat assessment analysis for vehicle collision avoidance. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Mohammed Ragab, Ahmed (2017) Delevolpment of semi active suspension system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Mohd Ali Hanafiah, Shaharudin and Zahari, Taha (2017) Numerical Model of Heat Transfer Coefficient in Hot Stamping Process. Applied Mathematics & Information Sciences, 11 (2). pp. 401-406. ISSN 1935-0090 (Print); 2325-0399 (Online) . (Published)
Mohd Fauzi, Abu Hassan and Ahmad Shahrizan, Abdul Ghani and Dhanesh, Ramachandram and Abduljalil, Radman and Shahrel Azmin, Suandi (2017) Enhancement of Under-Exposed Image for Object Tracking Algorithm Through Homomorphic Filtering and Mean Histogram Matching. Advanced Science Letters, 23 (11). pp. 11257-11261. ISSN 1936-6612. (Published)
Mohd Fawzi, Zamri (2017) Design of cooling channel in hot stamping tool by heuristic approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Yusoff, Ahmad Razlan).
Mohd Hafiz, Burhan and Nik Hisyamudin, Muhd Nor and Mogan, Yarwindran and Mustaffa, Ibrahim and Mohd Fahrul, Hassan and Mohd Azwir, Azlan and Faiz, Mohd Turan and Kartina, Johan (2017) Designing an Orthotic Insole by Using Kinect® XBOX Gaming Sensor Scanner and Computer Aided Engineering Software. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012026). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Mohd Hazwan Syafiq , Harun and M. F., Ghazali and A. R., Yusoff (2017) Analysis of Tri-axial Force and Vibration Sensors for Detection of Failure Criterion in Deep Twist Drilling Process. The International Journal of Advanced Manufacturing Technology, 89 (9-12). pp. 3535-3545. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)
Mohd Salleh, Abdul Rahim and Izwan, Ismail and S. N., Aqida (2017) Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature. Materials Science Forum, 890. pp. 108-111. ISSN 0255-5476. (Published)
Mohd Yazid, Abu and K. R., Jamaludin and Muhammad Aizzat, Zakaria (2017) Characterisation of Activity Based Costing on Remanufacturing Crankshaft. International Journal of Automotive and Mechanical Engineering (IJAME). ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Muhamad Faiq Fida'ie, Azami (2017) Design and develop modular CNC machine : machine based part. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Muhammad Aizzat, Zakaria and Anwar, P. P. A. Majeed and Ismail, Mohd Khairuddin and Zahari, Taha (2017) Kinematics Analysis of a 3DoF Lower Limb Exoskeleton for Gait Rehabilitation: A Preliminary Investigation. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 168-172. ISBN 978-981-10-3736-8
Muhammad Hanif, Abd Rashid and Nik Hisyamudin, Muhd Nor and Siti Norhana, Selamat and Mohd Fahrul, Hassan and Abd Khalil, Abd Rahim and Mohd Fauzi, Ahmad and Al Emran, Ismail and Badrul, Omar and Mohd Faiz, Mokhtar and Faiz, Mohd Turan and Yokoyama, Seiji (2017) Eco-design of Low Energy Mechanical Milling Through Implementation of Quality Function Deployment and Design for Sustainability. In: Proceedings of the 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy , 1–3 August 2016 , Jogjakarta, Indonesia. pp. 1-10., 1831 (020039). ISBN 978-0-7354-1499-0 (Published)
Muhammad Qahri Harir, Mohd Rapi (2017) Minimizing wear of EDM electrode in machining a hard material. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
N. M., Yahya and Tokhi, M. O. (2017) A Modified Bats Echolocation-Based Algorithm for Solving Constrained Optimisation Problems. International Journal of Bio-Inspired Computation, 10 (1). pp. 12-23. ISSN 1758-0366 . (Published)
Nabi, F. G. and Sundaraj, K. and Kiang, L. C. and Palaniappan, R. and Sundaraj, S. and Ahamed, Nizam Uddin (2017) Artificial Intelligence Techniques Used for Wheeze Sounds Analysis: Review. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympic Success: From Theory to Practice. IFMBE Proceedings, 58 . Springer, Singapore, pp. 37-40. ISBN 978-981-10-3736-8
Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2017) Bits Reduction in the Electrodeposition Process of a Pickup Truck – A case study. Jordan Journal of Mechanical and Industrial Engineering, 11 (1). pp. 27-33. ISSN 1995-6665. (Published)
Nabil Zhafri, Mohd Nasir and Muhammad Aizzat, Zakaria and Saifudin, Razali and Mohd Yazid, Abu (2017) Autonomous Mobile Robot Localization using Kalman Filter. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9., 90 (01069). ISSN 2261-236X (Published)
Nafrizuan, Mat Yahya (2017) Bat echolocation-inspired algorithms for global optimisation problems. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-47-4
Naqib Hakim, Kamarudin and Mebrahitom, A. and Azmir, Azhari (2017) Assembly meshing of abrasive waterjet nozzle erosion simulation. In: IOP Conference Series: Materials Science and Engineering, International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017) , 8-9 August 2017 , Kuala Lumpur, Malaysia. pp. 1-8., 290 (012069). ISSN 1757-899X (Published)
Naqibah, Azman and Nik Hisyamudin, Muhd Nor and Mohd Fahrul, Hassan and Saifulnizan, Jamian and Muhammad Hanif, Abd Rashid and Badrul, Omar and Siti Zarina, Mohd Muji and Fariza, Mohamad and Mohd Fauzi, Ahmad and Faiz, Mohd Turan and Elmi, Abu Bakar (2017) Review on Design for Medical Device. In: MATEC Web of Conferences: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17) , 22-23 July 2017 , Langkawi, Malaysia. pp. 1-10., 135 (00020). ISSN 2261-236X (Published)
Nor Azirah, Arifin (2017) Development of low cost 3D printer. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nur Atiqah, Omar (2017) Development of hydropower sustainability assessment method in Malaysia context. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nur Azaida Ruzlyn, Ruzini (2017) A study on technical cleanliness at automotive component assembly line. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nur Iffah, Mohamed Azmi and Kamal Arifin, Mat Piah and Wan Azhar, Wan Yusoff and F. R. M., Romlay (2017) Optimization of PID Parameters Utilizing Variable Weight Grey-Taguchi Method and Particle Swarm Optimization. In: The 4th Asia Pacific Conference on Manufacturing Systems and The 3rd International Manufacturing Engineering Conference (APCOMS-IMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished) (Unpublished)
Nur Nazwa Syamimi, Salleh (2017) Noise monitoring in CNC machine working area in electronic based company in Kuantan, Malaysia. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2017) Development of Sustainability Assessment Framework in Hydropower sector. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6-7 May 2017 , Melaka, Malaysia. pp. 1-6., 226 (012048). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2017) Development of Systematic Sustainability Assessment (SSA) Tool for Enviromental Management in Malaysia Hydroelectric Project. In: Proceedings of the FGIC 1st Conference on Governance & Integrity , 3 - 4 April 2017 , Yayasan Pahang, Kuantan Pahnag, Malaysia.. pp. 9-16.. ISBN 978-967-2054-37-5 (Published)
Nur Syuhadah, Abdul Wahab (2017) Overall equipment effectiveness analysis of power magnetic inductor production line at BI technologies sdn. bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nuraini, Aziz and S. N., Aqida and I., Ismail (2017) Microstructural analysis of hot press formed 22MnB5 steel. In: 20th International ESAFORM Conference on Material Forming (ESAFORM 2017) , 26-28 April 2017 , University Dublin, Ireland. , 1896 (1). ISSN 0094243X ISBN 978-073541580-5 (Published)
Nurfatini, Zolkafli (2017) The development of ceramic insert of alumina toughened by zirconia and copper. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nurizzathanis, Mohamad Kusaseh and Dewan Muhammad, Nuruzzaman and Chowdhury, Mohammad Asaduzzaman and Oumer, A. N. and Noor Mazni, Ismail and Shahnor, Basri (2017) Tensile Properties of Glass Fiber Reinforced Polyamide 6-Polypropylene Composites. In: 5th International Conference and Exhibition Sustainable Energy and Advanced Material (ICE-SEAM) , 16-19 October 2017 , Melaka, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)
Nurul Afiqah, Zainal (2017) Investigation of maximum power point tracking (MPPT) for active cooling mono-crystalline photovoltaic panel using fuzzy logic controller. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Ain Nabihah, Abd Rahman (2017) Experimental investigation of the flexure impact properties of glass fiber reinforced polymer composites. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Nurul Akmal, Che Lah and Mahendran, Samykano and Mohd Rafie, Johan and Nuurul Syahierah, Othman and Mohd Mawardi, Saari and Fen, Leo Bey and Nur Zalikha, Khalil (2017) Plasmonic Behaviour of Phenylenediamine Functionalised Silver Nanoparticles. Materials Research Express, 4 (9). pp. 1-14. ISSN 2053-1591. (Published)
Nurul Akmal, Che Lah and Mohd Rafie, Johan and Samykano, Mahendran and Mohd Mawardi, Saari (2017) Truncated and Spheroidal Ag Nanoparticles: A Matter of Size Transformation. Colloid and Polymer Science. pp. 1-11. ISSN 0303-402X (Print); 1435-1536 (Online). (Published)
Nurul Hidayah, Razak and Zhan, W. Chen and Timotius, Pasang (2017) Effects of Increasing Feed Rate on Tool Deterioration and Cutting Force during End Milling of 718Plus Superalloy Using Cemented Tungsten Carbide Tool. Metals, 7 (10). pp. 1-14. ISSN 2075-4701. (Published)
Oudah, Ali A. (2017) Deployments Scenarios of 5G Networks. In: The 5th International Conference On Wireless Systems And Networks (ICWSN-2017) , 24-27 April 2017 , Toronto, Canada. pp. 1-10.. (Unpublished) (Unpublished)
Prosser, M. and Johnson, M. and Saptaji, Kushendarsyah (2017) Sustainable Bauxite Mining Guidelines. Journal of Malaysian Critical Metals, 2. pp. 1-5. ISSN 0128-2557. (Published)
Rabbi, M. F. and Ahamed, Nizam Uddin and Alqahtani, Mahdi and Altwijri, Omar and Kamarul Hawari, Ghazali and Sundaraj, K. (2017) Investigation of the EMG-angle Relationship in the Upper-limb Muscles during Isometric Contraction. Biomedical Research (India), 28 (6). pp. 2393-2397. ISSN 0970-938X . (Published)
Rabbi, M. F. and Kamarul Hawari, Ghazali and Ahamed, Nizam Uddin and Sikandar, Tasriva (2017) Time and Frequency Domain Features of EMG Signal during Islamic Prayer (Salat). In: IEEE 13th International Colloquium on Signal Processing & its Applications (CSPA 2017) , 10-12 March 2017 , Batu Ferringhi, Malaysia. pp. 139-143.. ISBN 978-1-5090-1184-1 (Published)
Radhiyah, Abd Aziz and Rajan, Jose (2017) Charge Storage Capability of Tunnel MnO2 and Alkaline Layered Na-MnO2 as Anode Material for Aqueous Asymmetry Supercapacitor. Journal of Electroanalytical Chemistry, 799. pp. 538-546. ISSN 1572-6657. (Published)
Saptaji, Kushendarsyah and Subbiah, Sathyan (2017) Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool. Procedia Engineering, 184. pp. 137-144. ISSN 1877-7058. (Published)
Shahrom, Mohd Syahmi and A. R., Yusoff (2017) Cyclic extrusion compression back pressure technique for hot forging process in direct recycling of aluminium 6061 machining chip. Journal of Manufacturing Processes, 29. pp. 1-9. ISSN 1526-6125. (Published)
Sin-Ye, Phoon and Hwa, Jen Yap and Zahari, Taha and Yun, Suen Pai (2017) Interactive Solution Approach For Loop Layout Problem Using Virtual Reality Technology. The International Journal of Advanced Manufacturing Technology, 89 (5-8). pp. 2375-2385. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)
Siti Norhana, Selamat and Nik Hisyamudin, Muhd Nor and Muhammad Hanif, Abdul Rashid and Mohd Fauzi, Ahmad and Fariza, Mohamad and Al Emran, Ismail and Mohd Fahrul, Hassan and Faiz, Mohd Turan and Zamzuri, Hamedon and Elmi, Abu Bakar and Seiji, Yokoyama (2017) Review of CO2 Reduction Technologies using Mineral Carbonation of Iron and Steel Making Slag in Malaysia. In: Journal of Physics: Conference Series, International Conference on Materials Physics and Mechanics 2017 , 23 July 2017 , Langkawi, Malaysia. pp. 1-14., 914 (012012). ISSN 1742-6596 (Published)
Siti Norhanani, Saari (2017) Cutting orientations of non-complex part in 4th axis CNC machining for rapid manufacturing process. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Siti Nur Sakinah, Jamaludin and Shahnor, Basri and Faizal, Mustapha and Nuruzzaman, D. M. and Muhammad Ihsan, Abdul Latiff and Noor Mazni, Ismail (2017) Phase Contamination Characterization of Stepwise-built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. In: 5th International Conference on Engineering and Innovative Materials, ICEIM 2016 , 10 - 12 September 2016 , Kuala Lumpur, Malaysia. pp. 90-96., 889. ISSN 0255-5476 (Published)
Siti Nursyuhada, Mahsahirun (2017) Development of S-PWM voltage source inverter for induction motor drives. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Sugoro Bhakti , Sutono and Salwa Hanim, Abdul-Rashid and Zahari, Taha (2017) Integration of Grey-Based Taguchi Method and Principal Component Analysis for Multi-Response Decision-Making in Kansei Engineering. European Journal of Industrial Engineering, 11 (2). pp. 205-227. ISSN 1751-5254 (Print); 1751-5262 (Online). (Published)
Szeto, Yang Yang (2017) Wireless GSM haze monitoring system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Tan, Hon Seong (2017) Application of adaptive bats sonar algorithm to minimise car side impact design. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Tan, Yee Siang (2017) Pick and place programmable logic controller system for hot press forming. Facuity of Manufacturing Engineering, Universiti Malaysia Pahang.
Usamah, Shamsuddin (2017) Implementation of a quality-focused organisational structure through shop floor management. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Vivekanandan, Panneerselvam (2017) Microcontroller based boost converter for vibration power harvester. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Wan Nurul Syahirah, Wan Lanang and Faiz, Mohd Turan and Kartina, Johan (2017) Systematic Assessment Model for Sustainability Reporting in the Malaysia Context. In: Proceedings of the FGIC 1st Conference on Governance & Integrity , 3-4 April 2017 , Yayasan Pahang, Kuantan, Malaysia. pp. 1-8.. ISBN 978-967-2054-37-5 (Published)
Wan Nurul Syahirah, Wan Lanang and Faiz, Mohd Turan and Kartina, Johan (2017) Systematic Assessment Through Mathematical Model for Sustainability Reporting in Malaysia Context. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-9., 226 (012049). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Wong, Kelvin Le Thai (2017) Automated fruit grading system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Y., Mohd Syafiq and Zamzuri, Hamedon and Wan Azila, Aziz and A. R., Yusoff (2017) Prevention of Crack In Stretch Flanging Process Using Hot Stamping Technique. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257. ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Yong, Zong Wei (2017) Autonomous mobile robot using myRIO. Facuity of Manufacturing Engineering, Universiti Malaysia Pahang.
Zahari, Taha and Anwar, P. P. Abdul Majeed and Ismail, Mohd Khairuddin and M. Y., Wong and M. A., Abdullah and M. A., Mohd Razman (2017) The Control of an Upper-Limb CC by Means of a Particle Swarm Optimized Active Force Control for Motor Recovery. In: 3rd International Conference on Movement, Health and Exercise: Engineering Olympics Success: From Theory to Practice. Springer, pp. 56-62. ISBN 978-981-10-3736-8
Zahari, Taha and Anwar, P. P. Abdul Majeed and M. A., Abdullah and I.M., Khairuddin and M.A., Zakaria and M. H. A., Hassan (2017) The identification and control of an upper extremity exoskeleton for motor recovery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), p. 483. ISBN 9789670257884
Zahari, Taha and Haque, Mainul and Musa, Rabiu Muazu and Mohamad Razali, Abdullah and Maliki, Ahmad Bisyri Husin Musawi and Norzulaika, Alias and Norlaila Azura, Kosni (2017) Intelligent Prediction of Suitable Physical Characteristics Toward Archery Performance Using Multivariate Techniques. Journal of Global Pharma Technology, 9 (7). pp. 44-52. ISSN 0975 -8542. (Published)
Zahari, Taha and Jessnor Arif, Mat-Jizat and Muhammad Amirul, Abdullah and Mohamad Razali, Abdullah and Musa, Rabiu Muazu and Mohamad Fauzi, Ibrahim and Mohd Ali Hanafiah, Shaharudin (2017) Integrated multi sensors and camera video sequence application for performance monitoring in archery. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Zahari, Taha and Lum, Shirley and Mohd Azraai, Mohd Razman (2017) A Review on Non-Invasive Hypertension Monitoring System by using Photoplethysmography Method. Movement, Health & Exercise (MoHE), 6 (1). pp. 47-57. ISSN 2231-9409. (Published)
Zahari, Taha and Mohd Azraai, Mohd Razman and Faeiz Azizi, Adnan and Anwar, P. P. A. Majeed and Rabiu Muazu, Musa (2017) The Development of the Putt.It.In Monitoring Device and the Establishment of Its Reliability: A Solution for Putting-In Analysis in Golf. Movement, Health & Exercise (MoHE), 6 (1). pp. 31-38. ISSN 2231-9409. (Published)
Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981 (Published)
Zahari, Taha and Mohd Hasnun Ariff, Hassan (2017) A Reaction-Force-Validated Soccer Ball Finite Element Model. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 231 (1). pp. 43-49. ISSN 1754-338X. (Published)
Zahari, Taha and Rabiu Muazu, Musa and M.R., Abdullah and M. H. A., Hassan and M. A. M., Razman and Anwar, P. P. Abdul Majeed (2017) Reliability testing of inertial measurement units in the analysis of physiological variables in archery. In: Proceedings of Mechanical Engineering Research Day 2017. Centre for Advanced Research on Energy (CARe), pp. 140-141. ISBN 9789670257884
Zahari, Taha and Rabiu Muazu, Musa and Mohamad Razali, Abdullah and Mohd Azrai, Mohd Razman and Chei, Ming Lee and Faeiz Azizi, Adnan and Muhammad Amirul, Abdullah and Haque, Mainul (2017) The Application of Inertial Measurement Units and Wearable Sensors to Measure Selected Physiological Indicators in Archery. Asian Journal of Pharmaceutical Research and Health Care, 9 (2). pp. 85-92. ISSN 2250-1460 . (Published)
Zainal Ariffin, Selamat and Alias, M. and A. R., Yusoff and M. M., Rahman (2017) Experimental of surface roughness and tool wear on coolant condition technique using Aluminium alloy 319 used in automotive industries. International Journal of Engineering Research & Science (IJOER), 3 (10). pp. 51-60. ISSN 2395-6992. (Published)
Zulhelmi, Ismail and Abdullah, Abu Hannifa and Zainal Abidin, Anis Sakinah and Kamal, Yusoh (2017) Production of functional graphene by kitchen mixer: mechanism and metric development for in situ measurement of sheet size. Journal of Nanostructure in Chemistry, 7 (3). pp. 231-242. ISSN 2008-9244 (Print); 2193-8865 (Online). (Published)
Zulhelmi, Ismail and Nurul Farhana, Abu Kassim and Abu Hannifa, Abdullah and Anis Sakinah, Zainal Abidin and Fadwa Sameha, Ismail and Kamal, Yusoh (2017) Black Tea Assisted Exfoliation Using a Kitchen Mixer Allowing One-Step Production of Graphene. Materials Research Express, 4 (7). ISSN 2053-1591. (Published)
Zuryaty, Zol (2017) Hubungan baik Muehlbauer Technologies manfaatkan mahasiswa. UMP News . (Unpublished)
Zuryaty, Zol (2017) Seminar Antarabangsa Serentak APCOMS dan iMEC fokus masa depan Kejuruteraan Pembuatan. UMP News . (Unpublished)