Items where Division is "Faculty of Mechanical Engineering" and Year is 2013
Up a level |
A
A., Shamsudeen and S., Abdullah and A. K., Ariffin and Yusoff, Ali (2013) Design and Simulation of a Cylinder Head Structure for A Compressed Natural Gas Direct Injection Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1620-1629. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
A. N. M., Rose and B., Md. Deros and M. N., Ab. Rahman (2013) Lean manufacturing perceptions and actual practice among Malaysian SME's in automotive industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (1). pp. 820-829. ISSN 2180-1606. (Published)
A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
A. R., Razali and Qin, Yi (2013) A Review on Micro-manufacturing, Micro-forming and Their Key Issues. Procedia Engineering, 53. pp. 665-672. ISSN 1877-7058. (Published)
Ab Rashid, Mohd Fadzil Faisae (2013) Modelling and optimization of assembly line balancing with multi-resource constraints. (Unpublished)
Abdul Ghaffar, Abdul Rahman and Kong, K. K. and Z., Ismail and Chong, W. T. (2013) Determination of Vibration Borne Stress in a Pipeline Using Fluid Structure Interaction. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
Abdul Ghaffar, Abdul Rahman and Khoo, Shin Yee and Zubaidah, Ismail and Chong, Wen Tong and Noroozi, Siamak (2013) Impact Force Identification by Using Modal Transformation Method in Collocated and Non-Collocated Cases. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 968-974. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Abdul Hadi, Che Hussin (2013) Leakage detection in pipelines using synchrosqueeze wavelet transform. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Abdul Kadir, Samta (2013) Leak detection in pipelines using wavelet and cepstrum analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abdul Muhaimin, Aris (2013) Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abdul Muiz, Jaafar (2013) Experiment and analysis of motocycle exhaust design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abdul Mutholib, Osman (2013) Fatigue analysis of similar and dissimilar solid rod welding using friction welding process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abdul Rahim, Zulkufli Ahmad (2013) Development of neck dummy for head impact (soccer heading) experimental setup. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abdullah, Muhamad Nawi (2013) Computational analysis of two dimensional flows on a convertible car roof. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Abid Abbas, Mohamed Arifin (2013) Analysis of propellers for micro hydro power for domestic and comercial loads. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Adzmil, Abdul Aziz (2013) Analysis of burst pressure on elbow and t-section in the presence of defect. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Adzuieen, Nordin and M. Amin, A Majid (2013) Analysis of Carbon Dioxide Emission of Gas Fueled Cogeneration Plant. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Published)
Ahmad Aizuddin Faiz, Che Jaafar (2013) A study of the spray characteristic for valve covered orifice diesel nozzle injector using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ahmad Alif, Ahmad Adam (2013) Predicting crack pattern on archimedes screw runner blade of micro hydro power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ahmad Basirul Subha, Alias and Thegaraju, D. and Sharma, K. V. (2013) Effect of Carbon Nanotube Dispersions to the Palm Oil Diesel-Biodiesel Blend Properties. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)
Ahmad Fitri, Yusop and Mohd Hafizil, Mat Yasin and R., Mamat and Abdul Adam, Abdullah and Amir, Aziz (2013) PM Emission of Diesel Engines Using Ester-Ethanol-Diesel Blended Fuel. Procedia Engineering, 53. pp. 530-535. ISSN 1877-7058. (Published)
Ahmad Hakimi, Abdul Nasir (2013) Development of ammonium perchlorate based solid propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ahmad Ikmal 'Akif, Abdul Khalil (2013) Design and fabrication of smoke piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ahmad Syafiq, Shiro (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ahmad Taufiq, Ayub (2013) Biomechanics and measurement on archery athlete: balancing body posture. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Aina Syafiza, Jamalulail (2013) To study and recommend measures to make fkm administration block be more energy efficient. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Akmalhabibi, Rosli (2013) Condition monitoring of faculty air conditioning system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Al-Dabbagh, Jinan B. and M., Ishak and Rozman, Mohd Tahar and Siti Aisyah, Harun (2013) Effect of the Milling Parameters on the Characteristics of Ti-50%Al Nanocrystallite Synthesized by Mechanical Alloying (MA). International Journal of Engineering Research & Technology (IJERT), 2 (8). pp. 2113-2119. ISSN 2278-0181. (Published)
Aman, Ahamad (2013) Fluid structural interface of force excitation on pipeline elbow joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Amierul Amin, Abdul Aziz (2013) Fabrication of aquaponic gravity flow plantation system for lettuce plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Amin Khairi, Rosli (2013) Automatic temperature control system for aquaponic green house. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Development of Strand Burner for Solid Propellant Burning Rate Studies. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013) . pp. 1-8.. (Published)
Amir, Aziz and R., Mamat and W. K., Wan Ali (2013) Low Pressure Strand Burner for Solid Propellant Burning Rate Studies. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)
Amir Syahmi, Nordin (2013) Effect of different cooling rate on integrated circuit (ic) package. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Amirul Izwan, Abdullah (2013) Design and fabrication of tandem rear part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Amran, Kamarudzaman (2013) Potential solid waste conversion for power generation (with case studies in Pekan and Rompin). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Anas Basri, Musthafa (2013) Experimental and numerical investigation on part thicknesses effects in tailor welded blank process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Angelina, Lawrence (2013) Effects of thickness difference and loading direction on fatigue properties of tailored welded blanks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ariffin, Abdullah (2013) Vibration suppression of flexible beam using electromagnetic shunt damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ashaari, Ibrahim (2013) The effect of torch distance on weldability of dissimilar welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Asmara, Y. P. and Juliawati, Alias and Ahmad Shahrizan, Sulaiman and Jamiluddin, Jaafar (2013) Mechanistic Model of Stress Corrosion Cracking (SCC) of Carbon Steel in Acidic Solution with Presence of H2s. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Aziee Edna Diawati, Hazwan (2013) Modal analysis on different type of aluminium, joined by tig welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman and Siti Rabiatull Aisha, Idris (2013) Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Azmi, W. H. and K. V., Sharma and R., Mamat and Shahrani, Anuar (2013) Nanofluid Properties For Forced Convection Heat Transfer: An Overview. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 397-408. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Azmi, W. H. and Sharma, K. V. and R., Mamat and Shahrani, Anuar (2013) Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube. Energy Procedia, 52. pp. 296-307. ISSN 1876-6102. (Published)
Azmi, W. H. and Sharma, K. V. and Sarma, P. K. and R., Mamat and Shahrani, Anuar and V. Dharma, Rao (2013) Experimental Determination of Turbulent Forced Convection Heat Transfer and Friction Factor with SiO2 Nanofluid. Experimental Thermal and Fluid Science, 51. pp. 103-111. ISSN 0894-1777. (Published)
B
Bastian Wibar, Momang (2013) Design analysis of exterior car body part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
C
Chan, Christoper Sing Kong (2013) Energy projection analysis of solar energy for water pump system using gridline power with focus on control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Chan, Neol Christopher (2013) Analysis of spindle cooling system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Che Azral Izzuddin, Che Rudi (2013) Finite element based fatique analysis of aluminium tailor welded blanks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Che Ku Eddy Nizwan, Che Ku Husin and Ong, S. A and Mohd Fadhlan, Mohd Yusof and Mohamad Zairi, Baharom (2013) A wavelet decomposition analysis of vibration signal for bearing fault detection. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 50 (012026). ISSN 1757-8981 (Published)
Chen, Rui (2013) Development of compressed air powered engine system based on subaru ea71 model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Cheong, Kok Soon (2013) Fiinite element analysis on multi-plane defects of ASTM 106 steel pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Chia, Ming Xuan (2013) Clustering of frequency-based vibration signal for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Chua, Yee Leong (2013) Productivity improvement in SME industry through new plant layout design by using witness software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
E
Elexanderio Julit, Iling (2013) Development of wireless ignition system (WISys) for solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
F
F., Basrawi and Yamada, Takanobu and Obara, Shin’ya (2013) Theoretical Analysis of Performance of a Micro Gas Turbine Co/Trigeneration System for Residential Buildings in a Tropical Region. Energy and Buildings, 67. pp. 108-117. ISSN 0378-7788. (Published)
F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Lee, Giok Chui (2013) Optimum Thickness of Wall Insulations and Their Thermal Performance for Buildings in Malaysian Climate. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1207-1217. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
F. R. M., Romlay (2013) Increasing performance of rotary ultrasonic motor through stator modification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Fadhlur Rahman, Mohd Romlay (2013) Characterizing of electrical and thermal characteristic of piezoelectric ultrasonic motor for a better speed and torque performance. (Unpublished)
Fadli, Mislan@Mishadi (2013) Comparison study of corrosion measurement technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Fairuz, Idris (2013) To study the multi-objective optimization of EDM using genetic algorithm. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Fakhrurrazi, Ab Karim (2013) Experimental and finite element evaluation of bending for galvanized iron. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Farah Liyana, Hassan (2013) Lead time reduction in SME by using value stream mapping (VSM) technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Fatimah, Dzaharudin and Suslov, Sergey A. and Manasseh, Richard and Ooi, Andrew (2013) Effects of Coupling, Bubble Size, and Spatial Arrangement on Chaotic Dynamics of Microbubble Cluster in Ultrasonic Fields. The Journal of Acoustical Society of America, 134 (5). pp. 3425-3434. ISSN 0001-4966. (Published)
Feng, Cheng (2013) Comparison of design experiment in carbon dioxide (co2) corrosion prediction. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
G
Gan, Leong Ming (2013) Tukun tiruan bantu pelihara ekosistem hidupan. CREATE . p. 27. ISSN 1823-7487
Gharehghani, A. and Koochak, M. and Mirsalim, M. and Yusaf, Talal (2013) Experimental Investigation of Thermal Balance of a Turbocharged SI engine Operating on Natural Gas. Applied Thermal Engineering, 60 (1-2). pp. 200-207. ISSN 1359-4311. (Published)
Goh, Ming Hui (2013) Dynamics analysis of 3 axis gantry type multipurpose CNC machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
H
Hadianatun Saadiah, Jasni (2013) Design and fabrication of printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Hamada, Khalaf I. and M. M., Rahman and A. Rashid, A. Aziz (2013) Parametric Study Of Instantaneous Heat Transfer Based on Multidimensional Model in Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 0360-3199. (Published)
Hamada, Khalaf I. and M. M., Rahman and M. A., Abdullah and R. A., Bakar and A. Rashid, A. Aziz (2013) Effect of Mixture Strength and Injection Timing on Combustion Characteristics of a Direct Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 0360-3199. (Published)
Hamdi Abdullah, Mohammed Mudhsh (2013) Design and analysis of piping system for an open channel flume’s flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Hamizatun, Mohd Fazi (2013) Correlation study of the strain and vibration signals of a beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Hanna, Mustafa (2013) Thermal simulation of laser surface processing for hot forming die surface hardening. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Hasan, Zainal Abidin (2013) Vibration suppression of flexible beam using eddy current damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
I
Ilmanfaiq, Hamzah (2013) Effect of mig and tig welding on hybrid structure using modal analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Irwan, Misalam (2013) Flow straightening analysis in an open channels flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Izzat Zikri, Musa (2013) Design and fabricate tandem bicycle front part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
J
Jagatis, Balaiyah (2013) Effect of chronic obstructive pulmonary disease on airflow motion using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Juliawati, Alias and Nur Azhani, Abd Razak (2013) Hydrogen Embrittlement Susceptibility of Pipeline Steel. Applied Mechanics and Materials, 315. pp. 820-824. ISSN 1662-7482. (Published)
K
K., Kadirgama and Adnan, M. Husein and Sharma, Korada Viswanatha and R. A., Bakar (2013) The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow. International Communications in Heat and Mass Transfer, 47. pp. 49-55. ISSN 0735-1933. (Published)
K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2013) The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube. Journal of Nanomaterials, 2013. pp. 1-12. ISSN 1687-4110 (print); 1687-4129 (online). (Published)
K., Kadirgama and Zahari, Taha and Abdul Rahim, Ismail and Azrul, Hisham and A., Zulkifli and Nasrul Hadi, Johari and Zulfika, Anuar (2013) Effect of knee pad on kicking a ball and gait analysis. Movement, Health & Exercise, 2 (1). pp. 41-46. ISSN 2289-9510. (Published)
Karisma Dritanti, Maulidah Putri (2013) Finitte element analysis of knee pad. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Khairul Anwar, Zainal Abidin (2013) Design and development of android application for fluid properties ebook and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Khalifaturrahim, Ab Rahman (2013) Experimental study of alternative fuel performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Khan, Md. Ashikur Rahman and M. M., Rahman (2013) Development of Regression Equation for Surface Finish and Analysis of Surface Integrity in EDM. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 7 (3). pp. 178-183. (Published)
Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2013) Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process. International Journal of Mathematical, Computational, Physical and Quantum Engineering, 7 (11). pp. 1122-1127. (Published)
Kim Sung, Chong (2013) Prediction of burst pressure on steel pipes using Gurson-Tvergaard-Needleman (GTN) model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Kong, Deyi (2013) CFD simulation of particle mixing in a fluidized bed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Kong, Pu Wei (2013) Evaluation of tensile properties of natural sand particle reinforced polymer composite. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Koochak, Mostafa and Gharehghani, Ayatallah and Shahbakhti, Mahdi (2013) Experimental and Simulation Study of In-Cylinder Strategies For Regeneration of Lean Nitrogen Oxide Traps In A High-Speed Direct-Injection Diesel Engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (12 ). pp. 1661-1673. ISSN 2041-2991. (Published)
L
L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
L. H., Shah and Nur Azhani, Abd Razak and Juliawati, Alias and M., Ishak (2013) Investigation on the Mechanical Properties of TIG Welded AA6061 Alloy Weldments using Different Aluminium Fillers. GSTF Journal of Engineering Technology, 2 (2). p. 116. ISSN 2251-3701 (print); 2251-371X (online). (Published)
L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Lagunesvary, Ganesan (2013) Heat exchanger for solar collector. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Lee, Chee Wor (2013) Stress behaviour of tailor welded blanks for dissimilar metals using finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Lee, Kok Keong (2013) To design rainwater collection system for domestic use and the economic cost analysis of the system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Leon, Mei Chen (2013) Pitting corrosion behaviour of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Leong, Guo Bang (2013) Fabrication of air-hybrid all terrain vehicles front suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Lim, Tien Yong (2013) Productivity improvement through re-design workplace area. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Lim Jun, Lun (2013) A study of the vibration signals behavior. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Loh, Chong Sean (2013) Design, fabrication & testing of water channel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Loh, Quo Liang (2013) Experimental analysis into the main artery of 2 chamber heart model during cardiac cycle. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Luqman Hakim, Ahmad Shah (2013) Wajarkah Malaysia miliki loji nuklear. Berita Harian, (19 Au . p. 27.
M
M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach. Journal of Mechanical Engineering and Sciences (JMES), 4 (June 2). pp. 418-430. ISSN 2231-8380 (online). (Published)
M., Sarizam and H., Terasaki and Y., Komizo (2013) Effect of Holding Temperature to Bainite Transformation in Cr Mo Steel. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-11.. (Published)
M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Fatigue Life Prediction Using Simplified Endurance Function Model. Advances in Mechanical Engineering, 2013 (581754). pp. 1-12. ISSN 1687-8132 (Print); 1687-8140 (Online). (Published)
M., Saifizi and M. Z., Ab Muin and Sazali, Yaacob and M. S., Mohamad (2013) Comparison of Arx and Armax Model for Thermoelectric Refrigerator. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Published)
M. A., Aris and Zahari, Taha and M. H. A., Hassan (2013) The Influence of Football Boot Construction on Ball Velocity and Deformation. In: International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished) (Unpublished)
M. A., Azmi and H. Z., Abdullah and M. I., Idris (2013) Properties of Polyurethane Foam/Coconut Coir Fiber as a Core Material and as a Sandwich Composites Component. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7.. (Published)
M. F., Ghazali and F. A., Rahim (2013) CFD Prediction of Heat and Fluid Flow through U-Bends using High Reynolds-number EVM and DSM Models. Procedia Engineering, 53. pp. 600-606. ISSN 1877-7058. (Published)
M. H. A., Hassan and Zahari, Taha and Zulfika, Anuar and M. A., Aris (2013) Brain Acceleration During Ball-To-Head Impact in Soccer. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished) (Unpublished)
M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) Detail Guide for Cfd on the Simulation of Biogas Combustion in Bluff-Body Mild Burner. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-25.. (Unpublished) (Unpublished)
M. M., Noor and Andrew P., Wandel and Talal, Yusaf (2013) The Development of Mild Combustion Open Burner Experimental Setup. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-20.. (Unpublished) (Unpublished)
M. M., Noor and Talal, Yusaf and Baker, P. and Hamawand, I. (2013) Effect of Compressed Natural Gas Mixing on the Engine Performance and Emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1416-1429. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. M., Noor and Talal, Yusaf and Wandel, Andrew P. (2013) Mild Combustion: The Future for Lean and Clean Combustion. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-15.. (Published)
M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) The Analysis of Recirculation Zone and Ignition Position of Non-Premixed Bluff-Body for Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1176-1186. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Design and Development of MILD Combustion Burner. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 664-676. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) Numerical Study of Oxygen Dilution and Temperature Distribution of Biogas Combustion in Bluff-Body MILD Burner. In: Proceedings of the Australian Combustion Symposium , November 6-8, 2013 , The University of Westerm Australia. . (Published)
M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2013) Discretization of Three Dimensional Non-Uniform Grid: Conditional Moment Closure Elliptic Equation Using Finite Difference Method. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC) 2013 , 4-5 July 2013 , Sydney, Australia. pp. 48-60.. (Published)
M. R. M., Rejab and Cantwell, W. J. (2013) The Mechanical Behaviour of Corrugated-Core Sandwich Panels. Composites Part B: Engineering, 47. pp. 267-277. ISSN 1359-8368. (Published)
M. S., Idris and N. M. M., Ammar and T. M. Y. S., Tuan Ya and A. M., Amin (2013) Transient Semi-Circular Lid-Driven Cavity Flow Using Nonuniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. S., Idris and N. M. M., Ammar and Tuan Mohammad Yusoff, Tuan Ya and At-Tasneem, Mohd Amin (2013) Transient Semi Circular Lid Driven Cavity Flow Using Non Uniform Structured Grid Method with Upwind Scheme. Journal of Mechanical Engineering and Sciences (JMES) , 5. pp. 713-722. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
M. S. M., Sani and Ouyang, H. and Cooper, J.E. and Che Ku Eddy Nizwan, Che Ku Husin (2013) Smart Methodology of Stiffness Nonlinearity Identification Vibration System. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
M. Surenderen, Morgan (2013) Performance of Proton Green Mobility Challenge electric car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mahendran, Moorthy and H.L., Ong and Lee, Giok Chui and K., Thanikaikumaran (2013) An Experimental comparison study between Single-Axis Tracking and Fixed Photovoltaic Solar Panel Efficiency and Power Output: Case Study in East Coast Malaysia. In: Sustainable Development Conference 2013 , 21-23 June 2013 , Bangkok, Thailand. . (Published)
Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished) (Unpublished)
Maizatul Asnida, Hassan (2013) Optimization of the electrical discharge machining performance on titanium alloy by using statistical method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Makeen, Mohd Amin and Abdul, Hadi and M. F., Ghazali (2013) Leakage Detection in Pipeline Using Synchrosqueeze Wavelet Transform. Applied Mechanics and Materials, 465-466. pp. 467-471. ISSN 1662-7482. (Published)
Md Asyraf Zulfadhly, Md Zainudin (2013) The effects of pin profile on joining aluminium alloy by using friction stir welding technique. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Miminorazeansuhaila, Loman and Che Ku Eddy Nizwan, Che Ku Husin and Norshalawati, Mat Yusof (2013) Defect Detection on Welding Joint using Acoustic Emission Technology. In: International Conference on Innovations in Engineering and Technology (ICIET'2013) , 25-26 December 2013 , Bangkok, Thailand. pp. 154-157.. (Published)
Moganaraj, Murugiah (2013) Detail experimental testing of unmanned aerial vehicles engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Arif, Roslan (2013) Evaluation on the performances of a micro gas turbine, gas engine-cogeneration system in sewage treatment plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Asyraf, Ahmad Bustamang (2013) Modal analysis of electromagnetic actuator for non-contact modal testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Azwan, Mohd Ghazali (2013) Modelling the role of acidic species on CO2 corrosion prediction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Khairuazlan, Kamaruzaman (2013) Investigation of chloride stress corrosion cracking in austenitic stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Luqman, Zaki Monsarif (2013) Modeling magneto-rheological damper using neural network and simulated annealing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Maliki, Sulaiman (2013) Design and fabrication of push button coconut palm collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Nabil, Nor Azman (2013) Development of short term hydrostatic test for PVC pipes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Nafis, Jamaluddin (2013) Improvement of boiling process in fish cracker production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Nazirul Mubin, Merzuki (2013) Tensile properties of alkali treated sugar palm fiber. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohamad Nazreen, Sharan (2013) Design and fabricate a droplet formation nozzle for dispersion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Norfaiza Anuar, Mahmood (2013) Measurement and validation of fluid structure interface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Ruzaini, Mohamed Ibrahim (2013) Design and fabrication of motorized cutter prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Shafis, Ahmad Ramli (2013) Design and fabrication of lead detection test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Shahir, Mohamed Nafi (2013) Development of extended range and blended control module for plug-in hybrid air motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Zikril Hakim, Md Saleh (2013) Numerical study on the pipe containing multiple aligned axial cracks. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Zulhilmi, Rosli (2013) Design and fabrication of hybrid tig/heating and mig welding torch holder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohamad Zulhisyam, Mohd Razmi (2013) Analysis on thin sheet metal feeding characteristic by a servo roll feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad, Ismail (2013) The study of spray characteristics by using video image processing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Afifuddin, Abd Razak (2013) Product design simplification through DMFA methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Izzat, Junid (2013) Fabrication of on/off magnetic clamp for welding process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohammad Khairulnizam, Ibrahim (2013) Development of the small scale piston type briquetting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Nazree, Abd Malek (2013) Conceptual study on hydrogen powered bicycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Shafei, Ramli (2013) Experimental study of alternative tire pyrolysis oil performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Syahir Syahmi, Hassan (2013) Fabrication of aquaponic dry gravel plantation system for tomato plant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammad Syazwan, Fauzi (2013) Design and development of laser CNC machine structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online). (Published)
Mohd Affendi, Ibrahim (2013) A study on various type of rotor disc brake using fae analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Aiman, Mahusin (2013) Design and development of mountain bike rear suspension for all mountain riding style. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Akmal, Mat Ludin (2013) Design of pico-hydro turbine by using a pump as a generator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Jaafar (2013) Review: Modelling of Meniscus of Knee Joint During Soccer Kicking. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8.. (Published)
Mohd Azrul Hisham, Mohd Adib and Mohd Firdaus, Mohd Jaafar and Nur Hazreen, Mohd Hasni (2013) Review: Modeling of Meniscus of Knee Joint During Soccer Kicking. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9., 50 (012027). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Mohd Azrul Hisham, Mohd Adib (2013) Kejuruteraan biomekanik bantu pembangunan negara. Berita Harian, (17 Ju . p. 31.
Mohd Azrul Hisham, Mohd Adib and Norashikin, Nor Tuah and Nur Hazreen, Mohd Hasni and Kahar, Osman (2013) Prediction of Blood Pattern in S-Shaped Model of Artery under Normal Blood Pressure. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 496-503. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Mohd Erman Fairuz, Zaidi (2013) Leakage detection in pipelines using empirical mode decomposition. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Fadhirul Amran, Jali @ Ali (2013) The development of a suspension spring in term of dimension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Fadhli, Che Ismail (2013) Modal analysis of dissimilar metal (steel and aluminium) joint by spot wleding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Fikri, Arifin (2013) Modelling magneto-rheological damper using radial basis function neural network. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Firdaus, Ibrahim (2013) Effect of different sodium chloride (NaCl) concentration on corrosion of coated steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Firdaus, Mohd Jaafar (2013) Modeling analysis of meniscus of knee joint during soccer kicking. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Firdaus, Mohd Rosli (2013) Design, analysis & fabrication of a scaled down model of an open channel flow flume and weir. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Firdhaus, Ahmad (2013) Leak detection in pipelines using ensemble empirical mode decomposition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53. pp. 701-706. ISSN 1877-7058. (Published)
Mohd Hafizil, Mat Yasin and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop (2013) Cyclic Variations of Combustion Characteristics in Diesel Engine Operating With B20 Blends with Alcohol Additives. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)
Mohd Hafizuddin, Abdul Rahim (2013) Spray development and combustion simulation for simple injection chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Hafizuddin, Mokhtor (2013) Gravity flow vertical farming using aquaphonic system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Hamka, Mohd Jaapar (2013) Design and development of plasma CNC machine structure (plate). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Haziq, Nordin (2013) Biomechanics analysis of kicking motion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Hazwan Syafiq , Harun and Zahari, Taha and Hadi, Abdul Salaam (2013) Sustainable Manufacturing: Effect of Material Selection and Design to the Environmental Impact in the Manufacturing Process. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-7., 50 (012060). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Mohd Helmi, Rasid (2013) Acoustic emission analysis for bearing condition monitoring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Hilmi, Mohd Zin (2013) Computational study of fuel spray structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Izrey Izuan, Mat Lazin (2013) Development of plug-in hybrid electric motorcycle powertrain system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Izuan, Hashim (2013) Vibration suppression of rotating disc using eddy current method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Izzat, Zulkafli (2013) Fabrication of hybrid air ATV rear suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Kamal, Mohd Nawawi and N. M. Zuki, N. M. and Adam Shariff Adli, Aminuddin (2013) Planning and Design of a Knowledge Based System for Green Manufacturing Management. In: IOP Conference Series: Materials Science and Engineering, 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Kuantan, Pahang, Malaysia. pp. 1-9., 50 (1). ISBN 1757-8981 (print); 1757-899X (online) (Published)
Mohd Khairi, Mohammad (2013) Analysis of a spur gear in automative system using finite element software. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Khairi Azri, Shapie (2013) The study of laser drilling of polymeric material. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Khairil Hafizi, Khairolazar (2013) Cutting performance of different coatings during minimum quantity lubricant milling of AA6061T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Nadzrizal, Mohamad Ghaazali (2013) The study of joining strength based on differential joining technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Naqiuddin, Mohd Salleh (2013) Experimental and numerical analysis of heat distribution for different joining metal of tailor welded process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Nazeri, Mohd Annuar (2013) Optimization of quenching process in hot stamping of boron alloyed steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Nor Aidil, Mohd Azlan (2013) Cfd simulation of swirling in fluidized bed by using annular type distributor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Nor Amir, Nordin (2013) Design aluminium sacrificial anode properties in soil corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Norfaez, Ismail (2013) Laser surface modification of gray cast iron using ND: YAG laser for enhanced surface properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Norhafifi, Zainudin (2013) Clustering method for bone tissue classification using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Nur Syaffiq, Mahmood (2013) Strength investigation on resistance spot welding of low carbon steel and stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Rafi’uddin, Ramlan (2013) Hydrogen powered lawnmower. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Rashidi, Maarof (2013) Microstructure and Mechanical Properties of Modified Ductile Ni-resist With Higher Manganese Content. Materials Science and Engineering : A, 574 (2. pp. 226-234. (Published)
Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2013) Effect of Inoculation On Microstructure, Mechanical and Corrosion Properties of High Manganese Ductile Ni-resist Alloy. Materials and Design, 51 (Oktober). pp. 861-869. ISSN 0261-3069. (Published)
Mohd Redzuan, Hasan (2013) Experiment and analysis of intake pipe for single cylinder engine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Ridwan, Kasim (2013) Design and fabricate test rig for kicking soccer ball. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Saberi, Mohamad and Sigeru, Omatu and Safaai, Deris and Yoshioka, Michifumi and Afnizanfaizal, Abdullah and Zuwairie, Ibrahim (2013) An enhancement of binary particle swarm optimization for gene selection in classifying cancer classes. Algorithms for Molecular Biology, 8 (15). pp. 1-11. ISSN 1748-7188. (Published)
Mohd Salehuddin, Idres (2013) Active force control on active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Sani, Idris (2013) Investigation of mechanical properties of aluminium-steel welding using different welding technique and processes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Shafiq Azrul, Azmi (2013) A study of dynamic characteristics for crack identification. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd Syazali, Mohd Arif (2013) Process improvement on fish cleaning in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Mohd Yusof, Taib and Shahrani, Anuar and Hassan, Ibrahim (2013) Numerical Investigation of Ground Cooling Potential for Malaysian Climate. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)
Mohd Zaidi, Mohd Tumari and Latifah, Shabudin and Mohd Anwar, Zawawi and L. H., Shah (2013) Active Sway Control of a Gantry Crane Using Hybrid Input Shaping and PID Control Schemes. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-11. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Mohd Zaidi, Sidek and Nur Adjla, Mohamad Hafizin and Ahmad Nasser, Mohd Rose and Khairul Azha, Abd Jalal (2013) Experimental Analysis on Martensite Formation of Low Carbon Steel During Rapid Cooling Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)
Mohd Zaidi, Sidek and Anas Basri, Musthafa and Jasri, Mohamad and Muhamad Rozikin, Kamaluddin (2013) Finite Element Analysis on Dissimilar Thickness Joining of The Tailor-Welded Blank Process. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)
Mohd Zulhilmi, Abd Jabar (2013) Analysis of aiming technique in archery shooting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mohd. Herzwan, Hamzah and Abdul Adam, Abdullah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2013) Performance of Diesel Engine Operating with Waste Plastic Disposal Fuel. Applied Mechanics and Materials, 465-46. pp. 423-427. ISSN 1662-7482. (Published)
Mohd.Halimi, Azman (2013) Mechanistic study of co2 corrosion related to corrosion in oil and gas exploration and production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Afiq, Saukit (2013) Conceptual study of hydrogen powered wheelbarrow using fuel cell. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Aizuddin , Abdul Aziz (2013) Effect of fatigue life to the natural frequency of metallic component. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhamad Bakri, Abdul Hamid (2013) Analysis of battery performance on electric bicycle rear wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Firdaus, Zaini (2013) Automatic solar power for feeding system for aquaphonic farming. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Hisyamuddin, Jaffar (2013) Analysis on the performances of autoclaved aerated concretes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Khairul Anuar, Shaharuddin (2013) Design and fabrication of handy loose coconut palm collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Shafiq, Shahruddin (2013) Analysis of ligament behaviour for healthyhuman leg with or without kneepad after kicking the ball. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhamad Shafiq, Shahruddin (2013) Analysis of ligament behaviour for healthyhuman leg with or without kneepad after kicking the ball. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad 'Afif, Mohamed Azmi (2013) A wavelet analysis for crack location detection on cantilever beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad 'Azri, Mohd Razi (2013) Development of padded bandana for takraw players. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Adlin, Hasmar (2013) Analysis and design of an open channel flow flume : reservoir section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Akmal, Jamaludin (2013) Development of two wheels space-frame plug-in hybrid electric motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Alif Hafiz, Abd Murad (2013) Burst pressure prediction of collinear crack in steel pipeline. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Aminuddin, Adnan (2013) Effect of corrosion on printed circuit board. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Amir Akmal, Ahamad Khalid (2013) Fabrication of hybrid electric chopper tyre motorcycle front suspension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Asyraf, Jusoh (2013) A study on production of emulsified biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Badrul, Ishak Mustafa (2013) Design and fabricated pump trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Faez Helmie, Mohd Suhaimi (2013) Effect of hydrogen adsorption to the high strength steel in soil aqueous environment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Fakhrul, Hashim (2013) Toughness investigation on ferrous-nonferrous weld metal joint (galvanized iron-aluminium alloy). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Fakhrur-Razi, Abd Rahim (2013) Biomechanical analysis of weightlifting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Firdaus, Ab Moin (2013) Effect of corrosion on aluminium tailor welded blanks (similar material welding). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Haikal, Abdullah (2013) Development of rough grinding equipment for raw biomass resource. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Halifi, Muhamad (2013) Design of MIDI decoder and controller program for MIDI auto saxophone. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.
Muhammad Hamizan, Khalid (2013) Quality improvement for manufacturing process by using 7 QC tools in SME. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Iqbal, Ghazali (2013) Investigation of evacuated direct flow tube solar collector using different types of solar relfector with water-bases nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Maghribi, Selamat (2013) Design and fabrication two degree of freedom free vibration translation motion test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Nabil, Abdul Razak (2013) Investigation on the steel preheating effects on the aluminium-steel welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Nadzir, Nordin (2013) Innovation and development of a high pressure water nozzle discharged with curtain spray for oil leakage in offshore. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Naqeeb, Meor Ruslan (2013) Fabrication of automative body part using carbon fiber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Nor Ridzuan, M. Taifor (2013) Development of emulsion fuel mixer system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Norkhuzairi, Shaharin (2013) Analysis of the water flow in rectangular open channel flume with rectangular sharp crested weir. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Shahir, Nazir (2013) The application of adhesive bonding for different types of material for car body parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Shahiruddin, Alias (2013) Design and development of 3D foot scanning rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Shahrul, Sabri (2013) Numerical and experimental analysis of wake effect on tidal current turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Syauqi, Shaidan (2013) Development of edm tool for producing titanium alloy automotive valve application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Zaid, Nor Azlan (2013) Analysis on the performances of a micro gas turbine cogeneration system in sewage treatment plants. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muhammad Zakiran, Abd Aziz (2013) Identification of kinematic hardening parameters for mild steel by cyclic loading. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad Zulhilmi, Zakaria (2013) Vibration control of single link flexible manipulator by using neural network. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Muhammad ‘Imran, Zainal Abdin (2013) Fluid flow analysis of gas flow in oil and gas pipeline. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Mustika Yasti, Yasril (2013) Development of plug in drive train system for hybrid electric motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Muzammil, Mohamad Alias (2013) Study of spray breakup and mixture in a gasoline direct injection engine by using simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
N
N. M., Fadhillahanafi and K. Y., Leong and M. S., Risby (2013) Stability and Thermal Conductivity Characteristic of Carbon Nanotube Based Nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1376-1405. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
N. M. M., Ammar and Ahmad Alif, Ahmad Adam and Nurul Suraya, Azahari (2013) Predicting Errosion Pattern on Archimedes Screw Runner Blade of Hydro Power. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)
N. M. M., Ammar and Nasir, Ali and M. S., Idris and A. N., Oumer (2013) Numerical and Qualitative Analysis of a Single Particle Behavior in a Shear Driven Flow in Equilateral Triangular Cavity. Applied Mechanics and Materials, 465-46. pp. 557-561. ISSN 1662-7482. (Published)
N.A., Che Azhar and M.A., Mansor (2013) Development of Plant Maintenance Management System (PMMS): a Case Study. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-5.. (Published)
Nabil Fikri, Zuiful Zubri (2013) Design and analysis of the support structure for an open channel flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)
Nasir Ali, Mat Sani (2013) Study on behavior of particle flow in the lid driven cavity based on various geometries. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nasirul Muzaffar, Nasri (2013) Design and fabrication of knee pad. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nasrual Azuan, Alang and Nur Azhani, Abd Razak and M. R., Zulfadli (2013) The Influence of Gouge Defects on Failure Pressure of Steel Pipes. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-7.. (Unpublished) (Unpublished)
Nasrul Hadi, Johari and Kahar, Osman and Mohammed Rafiq, A. Kader (2013) The Effect of Tracheal Stenosis on Airflow in the Trachea and Main Bronchi:A Numerical Modelling Analysis. Advanced Science Letters, 19 (10). pp. 3041-3046. ISSN 1936-6612. (Published)
Nazirul Azim, Mohd Asri (2013) A study of vibration features for rotating specimenunder cyclic loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Neena Kaylisia, Brum (2013) Study of geometric effect to the crevice corrosion behaviour in stainless steel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Ng, Jun Pin (2013) A study of the strain signals behaviour. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ng, Kok Hwang (2013) Identicifation of isotropic hardening parameters for stainless steel sheet by cyclic loading tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ng, Yew Keong (2013) Numerical analysis on failure pressure of pipelines with multi-corroded region. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ng, Yew Keong (2013) Numerical analysis on failure pressure of pipelines with multi-corroded region. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ngoh, Rui Yong (2013) Identification of mixed hardening parameters for aluminium sheet by cyclic loading tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nik Muhamad Firdaus, Nik Salahuddin (2013) Modal analysis on cnc milling cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nik Nadia Farhana, Nik Zulkifli (2013) Laser surface modification of AISI 1025 steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nik Rosli, Abdullah and R., Mamat and Wyszynski, Miroslaw L. and Tsolakis, Anthanasios and Xu, Hongming (2013) Effects of Pilot Injection Timing and EGR on a Modern V6 Common Rail Direct Injection Diesel Engine. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Noor Azuani, Suliman (2013) Influence of orifice nozzle geometry on flow and spray characteristics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nor Akmal , Halim (2013) Finite element analysis on human knee. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nor Hafriz, Abd Halil (2013) Two dimensional particle flow inside driven trapezoid applying eularian-lagrangian approach. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nor Nabilah, Che Mansor (2013) Fluid structural interface analysis of force excitation on straight pipeline. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nor Syazwani, Hamsan (2013) Design and development of tire nut removal. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Norashikin, Nor Tuah (2013) Modeling analysis on blood flow into the main artery around knee joint of human leg during sports activities. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Norfarahanim, Muhamad@Ramli (2013) Effects of carburization process on the mechanical properties of carburized mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Norhaida, Ab Razak and Rahman, Md Mustafizur and Kadirgama, Kumaran (2013) Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Norhaida, Ab. Razak and Nasrul Azuan, Alang and M. A, Murad (2013) Burst pressure prediction of multiple cracks in pipelines. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)
Norlida, Jamil and A. R., Yusoff and Muhammad Hatifi, Mansor (2013) Experimental Study of the Static Modal Analysis on Milling Machine Tool. In: International Manufacturing Engineering Conference (IMEC 2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6.. (Unpublished) (Unpublished)
Noroozi, Siamak and Abdul Ghaffar, Abdul Rahman and Vinney, John and Ong, Zhi Chao and Khoo, Shin Yee (2013) Simulation of Performance Enhancement of Bi-Lateral Lower-Limb Amputees Through Impulse Synchronisation with Self Selected Running Step Frequency. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)
Nur, Cholis (2013) Electro-mechanical single acting pulley rubber V-belt continuously variable transmission (EMSAP RVB-CVT) for scooter. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nur Adilah, Ahmad (2013) Development of thermal barrier coating on tool steel surface. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nur Ain Amelia, Sathari (2013) The effects of single-pass/double-pass technique on friction stir welding of aluminium. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nur Ain Izzati, Zainudin (2013) Grain and size effect: a review on their influence in micro-manufacturing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Amirra, Rashid (2013) Dry machining and minimum quantity lubricant of aluminum alloy 6061-t6 using coated carbide tools. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nur Azhani, Abd Razak and Wai, Loon Ng and Juliawati, Alias (2013) Effects of Mig Welding to Corrosion Behaviour of Carbon Steel. Applied Mechanics and Materials, 315. pp. 914-918. ISSN 1662-7482. (Published)
Nur Azirah, Abdul Rahim (2013) Simulation of micro hydro power based on river configuration at river upstream. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Azleen, Abdol Mulok (2013) Effects of composite layer plate on modal experimental analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Fakhriah, Mohd Noordin (2013) Lean manufacturing techniques implementation at Zest Venture Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Fitrina, Mat Nawi (2013) Development of a rocket recovery system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Liyana, Abdul Rahim (2013) Solar collector storage tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nur Syazwani, Mohd Noor (2013) Biomechanical analysis on archery athletes. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Nuraini, Aziz and S. N., Aqida (2013) Optimization of Quenching Process In Hot Press Forming of 22mnb5 Steel For High Strength Properties. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-6. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Nuraini, Aziz and S. N., Aqida (2013) Optimization of quenching process in hot press forming of 22MnB5 steel for high strength properties for publication in. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-6., 50 (1). ISSN 1757-899X (Published)
Nurhanis Sofiah, Abd Ghafar (2013) Prototype development of normal Asian human skull. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nurizzatul Atikha, Rahmat (2013) Prediction of maximum strain and strain rate in SHPB specimens based on energy analysis. Masters thesis, Japan , Okayama University (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurshahiera, Mohidin (2013) Experimental investigation the effect of nanofluid on the pressure drop across the solar collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nurul Jasmie, Che Ahamed (2013) Optimizing of stud configuration on soccer boot: a finite element method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nurul Suraya, Azahari (2013) Particle impact prediction of an archimedes screw runner blade for micro hydro turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Nurulamni, Md Mukhtar (2013) Experimental analysis on water pipe turbine-generator design parameters. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
O
Obed M., Ali and R., Mamat (2013) Improving Engine Performance and Low Temperature Properties of Blended Palm Biodiesel Using Additives. A Review. Applied Mechanics and Materials, 315. pp. 68-72. ISSN 1662-7482. (Published)
Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Effects of Diethyl Ether Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. International Journal of Advanced Science and Technology (IJAST), 52. pp. 111-120. ISSN 2005-4238 . (Published)
Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2013) Effects of Blending Ethanol with Palm Oil Methyl Esters on Low Temperature Flow Properties and Fuel Characteristics. International Journal of Advanced Science and Technology, 59. pp. 85-96. ISSN 2005-4238 . (Published)
Ong, Horn Lu (2013) Single axis rotation pv solar panel tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
P
P., Murukesavan and N. M. M., Ammar and M. S., Idris (2013) Computational Analysis of an Effect of Aerodynamic Pressure on the Side View Mirror Geometry. In: International Conference on Mechanical Engineering Research (ICMER 2013) , 1-3 July 2013 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)
Perabu, Moorty (2013) Design an automobile simulation test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Prakash Raj, Subramaniam (2013) Failure pressure prediction of pipelines steel in the presence of corrosion defects and pre-strain. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Puvanesan, Muthusamy (2013) Experimental investigation of minimum quantity lubrication on tool wear in aluminum alloy 6061-T6 using different cutting tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
R
R., Mamat and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Nik Rosli, Abdullah and Wyszynski, Miroslaw L. (2013) Cycle-to-Cycle Variations of a Diesel Engine Operating with Palm Biodiesel. In: Proceedings of 39th International Scientific Congress on Powertrain and Transport Means European (KONES2013) , 6-12 September 2013 , Turata, Poland. pp. 1-9.. (Published)
Rabbiatul Addawiyyah, Ahmad Bustaman (2013) Assessment on effect of geometry defect for steel pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Rafidah, Saidin (2013) The effect of solar geometry on a window shade for energy efficient design of building. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Ramasamy, D. (2013) Engine valve seat wear study on compressed natural gas (CNG)by using nano powder. (Unpublished)
Rameish Rao, Subarmaniyan (2013) Investigation of carbon nanotube and zinc oxide as additive for enhanced lubricant performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Reza, M. S. and S. N., Aqida and Mohd Toff, Mohd Radzi and Brabazon, D. (2013) Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique. Key Engineering Materials, 554-55. pp. 603-610. (Published)
Rosdi, Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Amir Putra, Md Saat and Muhammad Hisyam, Lee and Aminudin, Che Ahmad (2013) Three-Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali. The Journal of Foot and Ankle Surgery, 52. pp. 426-431. ISSN 1067-2516. (Published)
S
S., Abdullah and Che Ku Eddy Nizwan, Che Ku Husin and M. F. M., Yunoh and M. Z., Nuawi and Z. M., Nopiah (2013) Fatigue Features Extraction of Road Load Time Data Using the S-Transform. International Journal of Automotive Technology, 14 (5). pp. 805-815. ISSN 1229-9138. (Published)
S. A., Che Ghani and Kai, Cheng and Timothy, Minton (2013) Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 356-372. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
S. N., Aqida and Brabazon, Dermot and Naher, Sumsun (2013) Atomic Diffusion in Laser Surface Modified AISI H13 Steel. Applied Physics A, 112 (1). pp. 139-142. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)
S. N., Aqida and Brabazon, Dermot and S., Naher (2013) An Investigation of Phase Transformation and Crystallinity in Laser Surface Modified H13 Steel. Applied Physics A, 110 (3). pp. 673-678. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)
S. N., Aqida and Fauzun, Fazliana and Wahab, Md. Saidin (2013) Laser Surface Modification of AISI 1025 Low Carbon Steel using Pulsed Nd:YAG Laser for Enhanced Surface Properties. Key Engineering Materials , 554-55. pp. 596-602. (Published)
Sakinah, Muhamad Hisham (2013) Experimental setup and biomechanics measurement of knee pads. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.
Sarah Fathiah, Ali (2013) Design & development of poka-yoke system for nut identification to defect prevention. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Sazwan, Sahar (2013) Design and analysis of the test section for an open channel flow flume. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Seow, Kok Foo (2013) Development of archery test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Ser, Beng Sian (2013) Development of four wheels space-frame hybrid air motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Shafie, Sulaiman (2013) Productivity improvement using industrial engineering tools (SMEs company). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Shafiq, Suhaimi and R., Mamat and Nik Rosli, Abdullah (2013) Investigation of the Effects of Inlet System Configuration on the Airflow Characteristics. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)
Shahren, Abd Manap (2013) Development of portable desk for biomechanics equipment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Sharveenesh, Vathivellu (2013) Analysis of an archery bow using finite element method and the development of an arcery bow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Shazmier Shah, Dilbar Shah (2013) Improvement of drying process in fish cracker production. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Shing Shian, Ng and Nur Azhani, Abd Razak (2013) Investigation of Mig Welding to Corrosion Behavior of Heat Treated Carbon Steel. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)
Siregar, J. P. (2013) Characterization of biodegradable composites based on pineapple leaf fibre and tapioca bioplastic resin. (Unpublished)
Sirwan, Ranj and Alghoul, M.A. and Sopian, K. and Yusoff, Ali and Jasim, Abdulateef (2013) Evaluation Of Adding Flash Tank To Solar Combined Ejector–Absorption Refrigeration System. Solar Energy, 91. pp. 283-296. ISSN 0038-092X. (Published)
Siti Aina Mardhia, Dol Haji (2013) Design and fabricate of portable cnc milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Siti Aishah, Rusdan and Tarlochan, Faris and Mohamad Rusydi, Mohamad Yasin (2013) Modeling and Optimization of Tapered Rectangular Thin-walled Columns Subjected to Oblique Loading for Impact Energy Absorption. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-2.. (Published)
Siti Firdaus, Md Salleh (2013) Ductile failure analysis of API steel pipe using strain based failure criteria. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Siti Nor Suziyana, Dollah (2013) Simulation of micro hydro power based on river configuration at river downstream. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Siti Nurhidayah, Daud (2013) Shooting techniques in archery sport based on biomechanics engineering: arm vibration analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Siti Rabiatull Aisha, Idris and Ali, Ourdjini (2013) Effect of Multiple Reflow on IMC Formation using Various Surface Finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410 (print); 1741-8429 (online). (Published)
Siti Rabiatull Aisha, Idris and Muhammad Hadzreel, M. R. Aeyzarq (2013) Effect of Reinforcement Alignment to the Properties of Polymer Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 548-554. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman (2013) Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2013) Effect of Reflow Profile on Intermetallic Compound Formation. IOP Conference Series: Materials Science and Engineering, 46. pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Siti Radiah, Arrippin (2013) Fluid structure interface (FSI) of force excitation on pipeline t-joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Siti Sarah, Abd Rahman (2013) Finite element analysis (FEA) for soccer ball impact. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Soh, Yan Xin (2013) Analysis of structure borne wave signatures in pipeline leakage detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Suga Ganeshan, Kalaichalban (2013) CFD of a screw blade for standalone micro hydro generator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Suraj, Vijanathan (2013) Designing and fabrication of racket test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Suziella, Awang (2013) Design a novel inhibitor for corrosion protection in oil and gas environments. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Ahmad Nazif, Noor Kamar (2013) A Study on Student's Perception Towards The Quality of Services Provided by The Library, University Malaysia Pahang (UMP). In: International Conference on Engineering Education 2013 , 24-25 December 2013 , Madinah. pp. 1-7.. (Unpublished) (Unpublished)
Suziyana, Mat Dahan and S. N., Nina and T. M., Yusof and Ahmad Basirul Subha, Alias (2013) Analysis of Heat Gain in Computer Laboratory and Excellent Centre by using CLTD/CLF/SCL Method. Procedia Engineering, 53. pp. 655-664. ISSN 1877-7058. (Published)
Syahidah Nafisa, Abdul Malik (2013) Development of graphical user interface (GUI) for bearing fault detection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Syahrul Ramadhan, Ahmad Kamal Ariffin (2013) Computation of solar radiation heat gain in analysing energy efficient operation of an air-conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Syamimi Soliha, Mohd (2013) Construction of the sunpath diagrams for Pekan area for simulating the solar radiation effects to a building. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Syarifah, Yunus and Amirul, Abd Rashid and Nik Rosli, Abdullah and R., Mamat and Syazuan, Abdul Latip (2013) Emissions of Transesterification Jatropha-palm Blended Biodiesel. Procedia Engineering, 68. pp. 265-270. ISSN 1877-7058. (Published)
Syarifah, Yunus and N. R., Abdullah and R., Mamat and A. A., Rashid (2013) An Overview of Palm, Jatropha & Algae as a Potential Biodiesel Feedstock in Malaysia. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
T
T. Z. S., Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Farid, Z. (2013) Investigation of potential waste material insulating properties at different temperature for thermal storage application. In: 2nd International Conference on Mechanical Engineering Research (ICMER2013) , 1-4 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-8., 50 (1). ISSN 1757-899X (Published)
Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) Estimation of Heat Transfer and Pressure Drop in an In-Line Flat Tubes Bundle by Radial Basis Function Network (RBFN). In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-8.. (Published)
Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2013) A Numerical Study Laminar Forced Convection of Air for In-Line Bundle of Cylinders Crossflow. Asian Journal of Scientific Research, 6 (2). pp. 217-226. ISSN 1992-1454. (Published)
Tan, Beng Leng (2013) Development of plug-in air powered four wheels motorcycle drivetrain control unit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Tan, Soon Wea (2013) Design and fabrication of two degree of freedom free vibration test rig : coordinate coulping. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup and Mohd Farid, Zainudin (2013) Investigation of Potential Waste Insulating Material Properties with Different Heat Transfer Fluid for Thermal Storage Application. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)
Teh, Swee Ing (2013) Vibration analysis of vehicle engine mounting. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Teh, Weng Khuin (2013) Notch effect to the fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Tengku Mohd Muaz, Tengku Zakaria (2013) Feasibilty study of dissilmilar metal welding between galvanized steel and alluminium alloys using metal inert gas welding(MIG). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Teoh, S. J. and R. A., Bakar and Gan, Leong Ming (2013) Computational Analysis on Plug-in Hybrid Electric Motorcycle Chassis. In: International Conference on Mechanical Engineering Research (ICMER2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-10.. (Unpublished) (Unpublished)
Tey, Fanny Pei Boon (2013) Power consumption of dosmetic refrigerator using nanoparticles Al2O3 lubricant mixture. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Thamir K., Ibrahim and M. M., Rahman (2013) Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 383-396. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Thamir K., Ibrahim and M. M., Rahman (2013) Study on effective parameter of the triple-pressure reheat combined cycle performance. Thermal Science, 17 (2). pp. 497-508. ISSN 2334-7163. (Published)
Thiwaan Rao, Narasimma Naidu (2013) Cfd simulation of multiple array arrangement of micro hydro power turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Tiong, Chiong Chii (2013) Investigation of the joining of acrylic by low power CO2 laser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Tuan Mohammad Yusoff, Tuan Ya and Sabir, O. and Norhafizan, Ahmed and Y., Nukman (2013) A Two Pressure-Velocity Approach for Immersed Boundary Methods in Three Dimensional Incompressible Flows. In: International Conference on Mechanical Engineering Research (ICMER2013), , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished) (Unpublished)
U
Umi Kalsom, Mohamad (2013) Lap joint dissimilar welding of aluminium and steel sheet using tig welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Umi Kalsom, Mohamad (2013) Lap joint dissimilar welding of aluminium and steel sheet using tig welding. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.
Ummu Kulthum, Jamaludin (2013) Developing and validating a new comprehensive glucose-insulin pharmacokinetics and pharmacodynamics model. PhD thesis, University of Canterbury, Christchurch, New Zealand (Contributors, UNSPECIFIED: UNSPECIFIED).
V
Veyolla, Jaffrey (2013) Effect of clamping distance and voltage on weldability of dissimilar welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
W
W. B., Santoso and R. A., Bakar and Nur, A. (2013) Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine at Low Load. Energy Procedia, 32. pp. 3-10. ISSN 1876-6102 . (Published)
Wan, Dong Hua (2013) Structural dynamic analysis of oil and gas transmission pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Wan Iryana, Wan Md Nor (2013) Fatigue behaviour of aluminium 6061 in tailor welded blank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Wan Mohamad Azam, Wan Mahmod (2013) A study on the effect of the flow rate on the power produced by the pico hydropower. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Wan Mohd Afiq Asyraf , Wan Junoh (2013) Determination of fracture strain using stress relaxation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Wan Nursyazwani, Ibrahim (2013) Design and fabrication of a solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Wan Nurul Afiqah, Wan Mohd Shafie (2013) Productivity improvement of fish crackers processing using simulation technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Y
Yap, Huey Tyng (2013) Fluid structural interface analysis of gas flow in oil and gas transmission pipe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Z
Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2013) An Investigation of Acoustic Emission Signal Attenuation for Monitoring of Progressive Failure in Fiberglass Reinforced Composite Laminates. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1442-1456. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2013) Wave Propagation Scattering Due to Defect on Thin Composite Plates. In: Proceedings of the 3rd Malaysian Postgraduate Conference (MPC2013) , 4-5 July 2013 , Sydney, New South Wales, Australia. pp. 80-88.. (Published)
Zahari, Taha and Aris, Mohd Azri and Zulkifli, Ahmad@Manap and Mohd Hasnun Ariff, Hassan and Nina Nadia, Sahim (2013) A Low Cost 3D Foot Scanner for Custom-Made Sports Shoes. Advanced Materials Research. ISSN 1022-6680. (Published)
Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris (2013) The Efficacy of Impact-Absorbing Materials during Collision with a Soccer Ball. Applied Mechanics and Materials, 440. pp. 363-368. ISSN 1662-7482. (Published)
Zahari, Taha and Hadi, Abdul Salaam and Tuan Mohammad Yusoff, Tuan Ya and S. Y., Phoon and C. F., Tan and M. A., Akiah (2013) Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1477-1586. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azri, Aris and Zulfika, Anuar (2013) Predicting Brain Acceleration During Heading Of Soccer Ball. Materials Science and Engineering, 50. pp. 1-6. ISSN 1757-899X. (Published)
Zambri, Harun and Nor Kamaliana, Khamis and Mohamad Dali, Isa and Zamri, Mohamed and Hashimah, Hashim (2013) The Roles of Professional Engineers at the Institutions of Higher Learning in Nation-Building. International Education Studies, 6 (6). pp. 137-142. ISSN 1913-9020. (Published)
Zul Fadli, Mohamad Tohid (2013) Automatic control valve using servo motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Zulfadly Syazwan, Zolkhair (2013) Different coating type on copper substrate. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
Zulkifli, Ahmad@Manap and K., Kadirgama (2013) Optimization of The Surface Crack on The Human Lumbar Vertebra. In: The 9th International Conference on Fracture and Strength of Solids 2013 , 9-13 June 2014 , Jeju, Korea. pp. 1-8.. (Unpublished) (Unpublished)