Items where Division is "Faculty of Manufacturing Engineering" and Year is 2018

A

A. M., Efendee and M., Saifuldin and Gebremariam, M.A. and Azmir, Azhari (2018) Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

A. R., Yusoff and Bagaber, Salem Abdullah and Fawzi, Zamri (2018) Sustainable machining process calculator. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

A.F., Mohd Sadullah and Nur Fahriza, M. A. and A., Zulkiple (2018) Mode choice for the journey to work during morning peak hour in Klang, Malaysia. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 187-188.. ISBN 9789672145202

Abu Hannifa, Abdullah and Zulhelmi, Ismail and Anis Sakinah, Zainal Abidin and Fadwa Sameeha, Ismail and Kamal, Yusoh (2018) PVA/Graphene nanocomposite: morphology and its thermal properties. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (1). ISSN 17578981

Ahmad Bisyri Husin, Musawi Maliki and Mohamad Razali, Abdullah and Hafizan, Juahir and Farhana, Abdullah and Nurul Ain Shahirah, Abdullah and Rabiu Muazu, Musa and Siti Musliha, Mat-Rasid and Aleesha, Adnan and Norlaila Azura, Kosni and Wan Siti Amalina, Wan Muhamad and Nur Afiqah, Mohamad Nasir (2018) A multilateral modelling of Youth Soccer Performance Index (YSPI). In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 17578981

Ahmad Bisyri Husin, Musawi Maliki and Mohamad Razali, Abdullah and Hafizan, Juahir and Wan Siti Amalina, Wan Muhamad and Nur Afiqah, Mohamad Nasir and Rabiu Muazu, Musa and Siti Musliha, Mat-Rasid and Aleesha, Adnan and Norlaila Azura, Kosni and Farhana, Abdullah and Nurul Ain Shahirah, Abdullah (2018) The role of anthropometric, growth and maturity index (AGaMI) influencing youth soccer relative performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Ahmad Fakhri, Ab. Nasir and Ahmad Shahrizan, Abdul Ghani and M. Nordin, A. Rahman (2018) Parallel guided image processing model for ficus deltoidea (Jack) moraceae varietal recognition. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 487-503. ISBN 9789811087875

Ahmad Fakhri, Ab. Nasir and M Nordin, A Rahman and Nashriyah, Mat and Abd Rasid, Mamat and Ahmad Shahrizan, Abdul Ghani (2018) Image pre-processing algorithm for Ficus deltoidea Jack (Moraceae) varietal recognition: a repeated perpendicular line scanning approach. International Journal of Engineering & Technology, 7 (2). pp. 49-53. ISSN 2227-524X. (Published)

Ahmad Fakhri, Ab. Nasir and Siti Suhaila, Sabarudin and Anwar, P. P. Abdul Majeed and Ahmad Shahrizan, Abdul Ghani (2018) Automated egg grading system using computer vision: Investigation on weight measure versus shape parameters. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 17578981

Ahmad Najmuddin, Ibrahim and Fukuoka, Yasuhiro (2018) Effect of assistive grouser mechanism on lightweight rover power consumption pattern on steep soft sand inclines. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 9789811087875

Ahmad Najmuddin, Ibrahim and Pang, Oh Yi and Yap, Wong Kien and Ahmad Shahrizan, Abdul Ghani (2018) Design of fast climbing robot for tree with multiple diverging branche. In: Lecture Notes in Mechanical Engineering. Springer Nature Singapore, pp. 395-402. ISBN 978-981-13-8322-9

Ahmad Shahir, Jamaludin and Hosokawa, A. and Furumoto, T. and Koyano, T. and Hashimoto, Y. (2018) Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Ahmad Shahir, Jamaludin and Hosokawa, A. and Tatsuaki, Furumoto and Tomohiro, Koyano and Yohei, Hashimoto (2018) High precision estimation on physical behavior for cutting with various tool rake angle by finite element method. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 715-723. ISBN 9789811087875

Ahmad Shahrizan, Abdul Ghani (2018) Image contrast enhancement using an integration of recursive-overlapped contrast limited adaptive histogram specification and dual-image wavelet fusion for the high visibility of deep underwater image. Ocean Engineering, 162. pp. 224-238. ISSN 0029-8018. (Published)

Ahmad Shahrizan, Abdul Ghani and Suresh, Sundarajoo (2018) Development of auto-tracking mobile robot. In: 4th International Conference on Science in Information Technology (ICSITECH 2018) , 30-31 Oct 2018 , Melaka. pp. 1-6.. (Unpublished)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2018) Numerical Investigation of Continuous Damping of The Semi-Active Suspension System for Passenger Car. In: The International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) , 12-13 December 2018 , Penang, Malaysia. pp. 1-11..

Aikhuele, Daniel O. and Faiz, Mohd Turan (2018) A conceptual model for the implementation of lean product development. International Journal of Service Science, Management, Engineering, and Technology, 9 (1). pp. 1-9. ISSN 1947-959X. (Unpublished) (Unpublished)

Aikhuele, Daniel Osezua and Faiz, Mohd Turan (2018) A Modified Exponential Score Function for Troubleshooting an Improved Locally Made Offshore Patrol Boat Engine. Journal of Marine Engineering & Technology, 17 (1). pp. 52-58. ISSN 2046-4177 (Print); 2056-8487 (Online). (Published)

Ainizar, Mustapa and Zulkifli, Md. Yusof and Asrul, Adam and Badaruddin, Muhammad and Zuwairie, Ibrahim (2018) Solving assembly sequence planning using angle modulated simulated kalman filter. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Amiril Sahab, Abdul Sani and Saiful Bahari, Hamzah and Mohd Shahril, Osman (2018) Modelling of fuzzy inference system for micro milling - a preliminary study through FEM. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 445-456. ISBN 978-981-13-8323-6

Ali, Mohammed A. H. and Alshamer, Mohammed A. (2018) An intelligent adjustable spanner for automated engagement with multi-diameter bolts/nuts during tightening/loosening process using vision system and fuzzy logic. The International Journal of Advanced Manufacturing Technology. pp. 1-19. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Au, Kai Lun (2018) A cascading fuzzy logic with image processing algorithm-based defect detection for automatic visual inspection of industrial cylindrical object’s surface. The International Journal of Advanced Manufacturing Technology. pp. 1-14. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ali, Mohammed A. H. and Mailah, Musa (2018) Online Mapping-Based Navigation System for Wheeled Mobile Robot in Road Following and Roundabout. In: Mobile Robots. IntechOpen, pp. 1-23.

Ali, Mohammed A. H. and Mailah, Musa (2018) Path Planning and Control of Mobile Robot in Road Environments using Sensor Fusion and Active Force Control. IEEE Transactions on Vehicular Technology. pp. 1-20. ISSN 0018-9545. (Published)

Ali, Mohammed A. H. and Musa, Mailah (2018) Laser simulator: a novel search graph-based path planning approach. International Journal of Advanced Robotic Systems, 15 (5). pp. 1-16. ISSN 1729-8806. (Published)

Ali, Mohammed A. H. and Nortasha, A. Yusoff (2018) Development of tele-monitoring attendance system using RFID and photo-cell. In: 2018 IEEE International Conference On Automatic Control And Intelligent Systems (I2CACIS 2018) , 20 - 21 Oktober 2018 , Shah Alam, Selangor. pp. 1-6.. (Unpublished)

Amiril Sahab, Abdul Sani and Erween, Abd Rahim and Zaidi, Embong and Samion, Syahrullail (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X. (Published)

Anwar, P. P. Abdul Majeed (2018) Hardware-in-the-loop study of a hybrid active force control scheme of an upper-limb exoskeleton for passive stroke rehabilitation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anwar, P. P. Abdul Majeed (2018) Hardware-in-the-loop study of a hybrid active force control scheme of an upper-limb exoskeleton for passive stroke rehabilitation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anwar, P. P. Abdul Majeed and Zahari, Taha and M. A., Abdullah and I.M., Khairuddin and M. A., Zakaria (2018) The control of an upper limb exoskeleton system for passive stroke rehabilitation: An active force control approach. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 297-298.. ISBN 9789672145202

Anwar, P. P. Abdul Majeed and Zahari, Taha and Mohammed A., Hashem Ali and Ismail, Mohd Khairuddin and Deboucha, Abdelhakim and Mohd Yashim, Wong Paul Tze and Amar Faiz, Zainal Abidin (2018) A hybrid active force control of a lower limb exoskeleton for gait rehabilitation. Biomedizinische Technik, 63 (4). pp. 491-500. ISSN 0013-5585. (Published)

Aqmal Idham, Abdul Shukor and Asrul, Adam (2018) Evaluation of Design Efficiency using Boothroyd Dewhurst Method for PCB Drilling Machine Products. International Journal of Simulation Systems, Science & Technology, 19 (5). 4.1-4.8. ISSN 1473-8031(Print); 1473-804x (Online). (Published)

Ayda, Emdadian and Ponnambalam, S. G. and Kanagaraj, G. (2018) An implementation of differential evolution algorithm for a single product and single period multi-echelon supply chain network model. Journal of Modern Manufacturing Systems and Technology, 1. pp. 1-14. ISSN 2636-9575. (Published)

B

Baarath, Kunjunni and Muhammad Aizzat, Zakaria and Nurul Afiqah, Zainal (2018) An investigation on the effect of lateral motion on normal forces acting on each tires for nonholonomic vehicle. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 611-621. ISBN 9789811087875

Badaruddin, Muhammad and Mohd Falfazli, Mat Jusof and Mohd Ibrahim, Shapiai and Asrul, Adam and Zulkifli, Md. Yusof and Kamil Zakwan, Mohd Azmi and Nor Hidayati, Abdul Aziz and Zuwairie, Ibrahim and Norrima, Mokhtar (2018) Feature Selection using Binary Simulated Kalman Filter for Peak Classification of EEG Signals. In: 8th International Conference on Intelligent Systems, Modelling and Simulation (ISMS2018) , 8-10 May 2018 , Kuala Lumpur, Malaysia. pp. 1-6.. ISBN 978-1-5386-6539-8

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Energy and Cost Integration for Multi-Objective Optimisation in a Sustainable Turning Process. Measurement. pp. 1-35. ISSN 0263-2241. (In Press / Online First) (In Press / Online First)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Multi-responses optimization in dry turning of a stainless steel as a key factor in minimum energy. The International Journal of Advanced Manufacturing Technology, 96 (1-4). pp. 1109-1122. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Bagaber, Salem Abdullah and A. R., Yusoff (2018) Sustainable optimization of dry turning of stainless steel based on energy consumption and machining cost. Procedia CIRP, 77. pp. 397-400. ISSN 2212-8271. (Published)

C

Chang, Yong En and Ali, Mohammed A. H. (2018) Control of wheeled mobile robot in restricted environment. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

Cheow, Kah Chun and Ahmad Shahrizan, Abdul Ghani and Ker, Shao Jiun and Nur Syazwani, Abdul Gani and Muhamad Izdhar, Zaki and Ahmad Fakhri, Ab. Nasir (2018) Electronic water balancing tool. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 573-589. ISBN 9789811087875

Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, M. Razman (2018) Machine learning approach in identifying speed breakers for autonomous driving: an overview. In: Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 409-424. ISBN 978-981-13-8323-6

D

Doolun, Ian Shivraj and Ponnambalam, S. G. and Subramanian, Nachiappan and Kanagaraj, G. (2018) Data driven hybrid evolutionary analytical approach for multi objective location allocation decisions: Automotive green supply chain empirical evidence. Computers and Operations Research, 98. pp. 265-283. ISSN 0305-0548. (Published)

E

El Sawy, Abdelrahman and Anwar, P. P. Abdul Majeed and Musa, Rabiu Muazu and Mohd Azraai, M. Razman and Mohd Hasnun Ariff, Hassan and Abdul Aziz, Jaafar (2018) The Flexural Strength Prediction of Porous Cu-Sn-Ti Composites via Artificial Neural Networks. In: Lecture Notes in Mechanical Engineering. Universiti Malaysia Pahang, pp. 403-407. ISBN 978-981-13-8323-6

Emirul Ridzwan, Nor Azmi (2018) A-star (A*) algorithm implementation for robotics path planning navigation. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

F

F. M., Fakharuddin and Fatchurrohman, Nanang and S., Puteh and H. M. A. R., Puteri (2018) A prototype for communitising technology: development of a smart salt water desalination device. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7., 342 (1). ISSN 1757-8981

Faisal, Jusoh and M. Nafis, O. Z. (2018) Ergonomics risk assessment among support staff in Universiti Malaysia Pahang. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012059). ISSN 1757-899X

Faiz, Mohd Turan and Kartina, Johan and Chui Sheng, Tay (2018) Business Sustainability Performance (BSP) quantifier for Malaysia context. In: Lecture Notes in Mechanical Engineering. Springer Singapore, Singapore, pp. 373-384. ISBN 978-981-13-8323-6

Faiz, Mohd Turan and Kartina, Johan and Muhammad Irfan, Abu Sofian (2018) Development of Sustainability Assessment Tool for Malaysian hydropower industry: A case study. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-10., 342 (012009).

Faiz, Mohd Turan and Kartina, Johan and Nur Atiqah, Omar (2018) Development of hydropower sustainability assessment method in Malaysia context. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012006). ISSN 1757-899X

Fatchurrohman, Nanang and Azriee, Abdullah (2018) Surface roughness and wear properties of Al–Al2O3 metal matrix composites fabricated using friction stir processing. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 155-160. ISBN 9789811087875

Fatchurrohman, Nanang and F.M., Fakharuddin and S., Puteh and H., Puteri (2018) A prototype for communitizing technology: development of smart salt water desalination device. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 01-02 March 2018 , UMP Pekan, Pahang. p. 1., 342 (1). ISSN 17578981

Fatemeh, D. B. and Loo, C. K. and Kanagaraj, G. and Ponnambalam, S. G. (2018) A hybrid SP-QPSO algorithm with parameter free adaptive penalty method for constrained global optimization problems. Journal of Modern Manufacturing Systems and Technology, 1. pp. 15-26. ISSN 2636-9575. (Published)

Fazilah, Abdul Aziz and Zakri, Ghazalli and Mohd Jawad, Mohd Jamil and Awanis, Romli and N. M. Zuki, N. M. (2018) A knowledge-based ergonomics assessment system for WMSD prevention using AHP methodology. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 161-173. ISBN 9789811087875

Firdaus Shazriq, Mohd Fadzil and Nur Izzati Khoirunnisa, Ismail and Nurrina, Rosli (2018) Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process. Journal of Modern Manufacturing Systems and Technology, 1. pp. 76-81. ISSN 2636-9575. (Published)

H

H. A., Salaam and Zahari, Taha and T. M. Y. S., Tuan Ya (2018) Multi objective optimization using genetic algorithm of a pneumatic connector. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012071). ISSN 1757-8981 (Print), 1757-899X (Online)

Hong, Cheow Shek and Ahmad Shahrizan, Abdul Ghani and Ismail, Mohd Khairuddin (2018) Development of an Electronic Kit for detecting asthma in Human Respiratory System. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

I

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

Ismail, Mohd Khairuddin and S. N., Sidek and H., Md. Yusof and Anwar, P. P. Abdul Majeed and A., Ahmad Puzi and H., Mat Rosly (2018) Assistive-as-needed strategy for upper-limb robotic systems: a preliminary evaluation of the impedance control architecture. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Ismed, Iskandar (2018) Competing risk models in reliability systems, an exponential distribution model with Bayesian analysis approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

K

Kamal Arifin, Mat Piah and Wan Azhar, Wan Yusoff and Nur Iffah, Mohamed Azmi and F. R. M., Romlay (2018) Pso-based PID speed control of traveling wave ultrasonic motor under temperature disturbance. In: IOP Conference Series: Materials Science and Engineering, Asia Pacific Conference On Manufacturing Systems And International Manufacturing Engineering Conference 2017 , 7-8 Disember 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-899X (online)

Kamarul Nizam, Hassan and Jamaluddin, Mahmud and Anwar, P. P. Abdul Majeed and Mohd Azman, Yahaya (2018) Quantifying tensile properties of bamboo silicone biocomposite using Yeoh Model. International Journal of Engineering & Technology, 7 (4). pp. 245-250. ISSN 2227-524X. (Published)

Kamarulzaman, Mahmad Khairai and Nurul Shamime, Salleh and A. R., Yusoff (2018) Occupational noise reduction in CNC striping process. In: IOP Conference Series: Materials Science and Engineering: The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2018) Deep underwater image enhancement through integration of red color correction based on blue color channel and global contrast stretching. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering, 538 (9). Springer Singapore, Singapore, pp. 35-44. ISBN 978-981-13-3708-6

Kartina, Johan and Faiz, Mohd Turan and Nur Syazwani, Abdul Gani (2018) A New Framework for Sustainable Hydropower Development Project. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (012007). ISSN 1757-899X

L

Lim, H. Y. and Muhammad Aizzat, Zakaria (2018) Trajectory tracking analysis of planar end-effector upper limb rehabilitation device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 183-195. ISBN 9789811087875

Lim, Syh Kai (2018) Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).

M

M., Murugan and Mebrahitom, A. and Azmir, Azhari and Zamzuri, Hamedon (2018) Performance analysis of abrasive waterjet machining process at low pressure. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

M. H., M. Ramli and Anwar, P. P. Abdul Majeed and M. A., M. Anuar and Z., Mohamed (2018) Modelling and control of a nonlinear magnetostrictive actuator system. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

M. Nafis, O. Z. and Mohamad Hafiz, Mohamad (2018) Development of machining simulation application using visual basic programming in NX CAM system environment. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 73-74.. ISBN 9789672145202

M. S. A., Radzak and Ali, Mohammed A. H. and S., Sha'amri and A. R., Azwan (2018) An overview on real-time control schemes for wheeled mobile robot. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 1757-8981

M. Sawal, A. R. and Ali, Mohammed A. H. and Sha'akmal, S. and Azwan, A. R. A (2018) Review on real-time control schemes for wheeled mobile robot. In: International Conference On Innovative Technology, Engineering And Sciences ICITES 2018 , 1-2 March 2018 , Pekan Campus Library Pekan, Pahang. pp. 1-5.. (Unpublished)

M. Sawal, A. R. and Ali, Mohammed A. H. and Sha’akmal, S. and A. Azwan, A. R. (2018) Design, fabrication and modelling of four-wheeled mobile robot platform with two differential and two caster wheels. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-7.. (Unpublished)

Mahendran, Samykano and R. V., Mohana Sundram and K., Sudhakar and S. G., Ponnabalam (2018) Nickel nanowire: magnetic ordering synthesis. In: International Conference on Advanced Nano Materials (ANM, 2018) , 18 - 20 July 2018 , University of Aveiro, Portugal. p. 1.. (Unpublished)

Marini, C. D. and Fatchurrohman, Nanang (2018) Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-4.. (Unpublished)

Mebrahitom, A. and Nur Amalina, Sabuan and Azmir, Azhari and Zamzuri, Hamedon and Tamiru Alemu, Lemma (2018) Microstructural and process characterization on the electrical conductivity and electrical discharge machinability of Al2O3-based ceramic composites. In: Advanced Energy Materials (AEM2018) Conference , 10 - 12 September 2018 , University of Surrey, England. p. 1.. (Unpublished)

Mohamad Hafiz, Mohamad and M. Nafis, O. Z. (2018) Investigation of roughing machining simulation by using visual basic programming in NX CAM system. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981

Mohamad Radzi, Mohd Sojak and Mohd Azraai, Mohd Razman and Anwar, P. P. Abdul Majeed and Rabiu Muazu, Musa and Ahmad Shahrizan, Abdul Ghani and Ismed, Iskandar (2018) The identification of oreochromis niloticus feeding behaviour through the integration of photoelectric sensor and logistic regression classifier. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-7.. (Unpublished)

Mohammed, Suad Khairi (2018) An experimental study of modified black hole algorithms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ibrahim, Zuwairie).

Mohd Faizal, Ali Akhbar and A. R., Yusoff (2018) Optimization of drilling parameters for thermal bone necrosis prevention. Technology and Health Care, 26 (4). pp. 621-632. ISSN 0928-7329 (Print); 1878-7401 (Online). (Published)

Mohd Faizal, Ali Akhbar and Mukhtar, Malik and A. R., Yusoff (2018) Effects of drilling parameters in numerical simulation to the bone temperature elevation. In: Advanced nanotechnology in engineering and medical sciences (ANEMS) international conference 2017 , 20-21 November 2017 , Langkawi, Malaysia. pp. 1-4., 1948 (020002). ISBN 978-0-7354-1643-7

Mohd Falfazli, Mat Jusof and Ahmad Azwan, Abdul Razak and Shuhairie, Mohammad and Ahmad Nor Kasruddin, Nasir and Mohd Helmi, Suid and Mohd Ashraf, Ahmad and Zuwairie, Ibrahim (2018) Simulated kalman filter algorithm with improved accuracy. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 343-351. ISBN 978-981-13-3708-6

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Effect of rake angle and feed rate on chip segmentation in machining carbon steel 1050. In: 9th International Conference on Manufacturing Science and Technology 2018 , 11 - 13 Aug 2018 , Kuala Lumpur. pp. 1-7.. (Unpublished)

Mohd Fawzi, Zamri and A. R., Yusoff (2018) Heuristic design of U-shaped die cooling channel for producing ultra-high strength steel using hot press forming. The International Journal of Advanced Manufacturing Technology, 97 (9-12). pp. 4101-4114. ISSN 0268-3768 (Print); 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Mohd Hasnun Arif, Hassan and Zahari, Taha and Mohd Ali Hanafiah, Shaharudin and Lim, Kok Wee and Zulfika, Anuar (2018) Development of a soccer ball launching device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 591-598. ISBN 9789811087875

Mohd Hasnun Ariff, Hassan and Zahari, Taha (2018) The effect of spin and friction on reaction forces in a soccer ball impact: A computational study. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 87-88.. ISBN 9789672145202

Mohd Hasnun Ariff, Hassan and Zahari, Taha and Iskandar, Hasanuddin and Mohd Jamil Mohamed, Mokhtarudin (2018) Mechanics of Soccer Heading and Protective Headgear. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore. ISBN 978-981-13-0271-8

Mohd Khairulnazri, Saidi (2018) Simposium himpun pakar kejuruteraan pembuatan. UMP News . (Unpublished)

Mohd Mawardi, Saari and Mohd Aufa, Hadi Putera Zaini and Hamzah, Ahmad and Nurul Akmal, Che Lah (2018) An AC magnetometer using automatic frequency switching of a resonant excitation coil for magnetic nanoparticles characterization. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3 - 4 Aug 2018 , Shah Alam, Selangor. pp. 1-4.. (Unpublished)

Mohd Mawardi, Saari and Nazatul Shareena, Suhaimi and M. H., Sulaiman and Nurul Akmal, Che Lah and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2018) Dynamic magnetization of thermally blocked iron oxide nanoparticles characterized by a sensitive AC magnetometer using a resonant excitation coil. In: 6th Edition of International Conference On Superconductivity and Magnetism (ICSM2018) , 29 April - 4 May 2018 , Premier Palace Hotel Beldibi, Antalya, Turkey. pp. 1-11.. (Unpublished)

Mohd Mawardi, Saari and Nazatul Sharreena, Suhaimi and Nurul Akmal, Che Lah and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2018) A sensitive AC magnetometer using a resonant excitation coil for magnetic fluid characterization in nonlinear magnetization region. In: IEEE International Magnetic Conference (INTERMAG 2018) , 23-27 April 2018 , Singapore. pp. 1-4.. ISBN 978-153866425-4

Mohd Mawardi, Saari and Nazatul Sharreena, Suhaimi and Nurul Akmal, Che Lah and Sakai, Kenji and Toshihiko, Kiwa (2018) A sensitive ac magnetometer using a resonant excitation coil for characterization of magnetic fluid in nonlinear magnetization region. In: IEEE International Magnetics Conference (INTERMAG 2018) , 23-27 April 2018 , Marina Bay Sands, Singapore. p. 1.. (Unpublished)

Mohd Mawardi, Saari and Nazatul Sharreena, Suhaimi and Saifudin, Razali and Nurul Akmal, Che Lah and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2018) Development of a resonant excitation coil of AC magnetometer for evaluation of magnetic fluid. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-2). pp. 127-130. ISSN 2180-1843(print); 2289-8131(online). (In Press / Online First) (In Press / Online First)

Mohd Syahray Izham, Muhazihat and Nurrina, Rosli and Radhiyah, Abd Aziz and Abdul Aziz, Jaafar (2018) Potential of direct evaporative cooling system under metal plate attachment to wetted pad application. Journal of Modern Manufacturing Systems and Technology, 1. pp. 69-75. ISSN 2636-9575. (Published)

Mohd Yashim, Wong Paul Tze (2018) Design analysis and structural optimisation of a rigid ankle foot orthosis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Taha, Zahari).

Mohd Yazid, Abu (2018) Project management. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang. ISBN 978-967-2054-89-4

Mohd Yazid, Abu and E. E., Mohd Nor and M. S., Abd Rahman (2018) Costing improvement of remanufacturing crankshaft by integrating Mahalanobis-Taguchi System and Activity based Costing. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-10., 342 (012006). ISSN 1757-899X

Mohd Yazid, Abu and Norizan, N. S. and M. S., Abd Rahman (2018) Integration of Mahalanobis-Taguchi system and traditional cost accounting for remanufacturing crankshaft. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-9., 342 (012005). ISSN 1757-899X

Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed and Zahari, Taha and M. M., Alim and Baarath, K. (2018) Forward and inverse predictive model for the trajectory tracking control of a lower limb exoskeleton for gait rehabilitation: simulation modelling analysis. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Muhammad Ajmal, Mohd Taqayuddin and Mohd Afzan, Mohd Anuar and Solehuddin, Shuib and Zulkifli, Mohamed and Anwar, P. P. Abdul Majeed (2018) Mechanics of total ankle replacement during flexion in relation to geometrical design: a finite element study. International Journal of Engineering & Technology, 7 (4). pp. 70-72. ISSN 2227-524X. (Published)

Muhammad Ihsan, Abdul Latiff and Nuruzzaman, D. M. and Shahnor, Basri and Noor Mazni, Ismail and Siti Nur Sakinah, Jamaludin and Farah Fazira, Kamaruzaman (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Mukhtar, Malik (2018) Experimental analysis and optimization of coated and uncoated carbide tool in drilling aisi 316 L austenite stainless steel using minimum quantity lubrication technique. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mussada, Eswara Krishna and Choo, Chee Hua and Prasada Rao, A. K. (2018) Surface hardenability studies of the die steel machined by WEDM. Materials and Manufacturing Processes, 33 (16). pp. 1745-1750. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

N

N., Jamil and A. R., Yusoff (2018) Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool. In: 6th Asia International Conference On Tribology , 17 - 20 Sept 2018 , Kuching, Sarawak. pp. 1-2.. (Unpublished)

N. F., Jamin and N. M. A., Ghani and Zuwairie, Ibrahim and M. F., Masrom and N. A. A, Razali and A. M., Almeshal (2018) Two-wheeled wheelchair stabilization using interval type-2 fuzzy logic controller. International Journal of Simulation Systems, Science & Technology (IJSSST), 19 (3). 3.1-3.7. ISSN 1473-8031 (print); 1473-804x (online). (Published)

N. M., Kusaseh and Nuruzzaman, D. M. and Noor Mazni, Ismail and Zamzuri, Hamedon and Azmir, Azhari and Iqbal, AKM Asif (2018) Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nabiilah, Ab Rahim (2018) Quality improvement in electrodeposition process of commercial vehicle using PDCA approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nabiilah, Ab Rahim and Zamzuri, Hamedon and Faiz, Mohd Turan (2018) Improving Quality of Light Commercial Vehicle Using PDCA Approach. Journal of Advanced Manufacturing Technology, 12 (1). pp. 525-533. ISSN 2289-8107. (Published)

Nafrizuan, Mat Yahya and M. Nafis, O. Z. (2018) Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company. In: 3th International Manufacturing Engineering Conference 2017 (IMEC 2017) , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012036).

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Nik Nurharyantie, Nik Mohd Kamil and Mohd Yazid, Abu (2018) Integration of Mahalanobis-Taguchi System and activity based costing for remanufacturing decision. Journal of Modern Manufacturing Systems and Technology, 1. pp. 39-51. ISSN 2636-9575. (Published)

Nik Nurul Husna, Muhmed Razali and A. R., Yusoff (2018) Optimisation of hybrid energy harvesting using finite element method based on vibration excitation. Progress in Industrial Ecology, an International Journal, 12 (3). pp. 284-296. ISSN 1476-8917 (Print); 1478-8764 (Online). (Published)

Nik Ruqiyah, Nik Hassan and Noor Mazni, Ismail and Suriati, Ghazali and Nuruzzaman, D. M. (2018) Thermal properties of polyethylene reinforced with recycled– poly (ethylene terephthalate) flakes. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-6., 342 (1). ISSN 17578981

Nor Amirah, Mohamad Radzuan (2018) Implementation of quick changeover on changing new model for CNC machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nor Azlina, Ab. Aziz and Zuwairie, Ibrahim and Marizan, Mubin and Sophan Wahyudi, Nawawi and Mohd Saberi, Mohamad (2018) Improving particle swarm optimization via adaptive switching asynchronous – synchronous update. Applied Soft Computing, 72. pp. 298-311. ISSN 1568-4946. (Published)

Nor Azlina, Ab. Aziz Nor and Hidayati, Abdul Aziz and Aminurafiuddin, Zulkifli and Zuwairie, Ibrahim and Tasiransurini, Ab. Rahman (2018) Is gravitational search algorithm's initial gravitational constant a function dependent parameter? In: ACM International Conference Proceeding Series: International Conference on E-Business and Mobile Commerce (ICEMC 2018) , 21-23 May 2018 , Chengdu, China. pp. 60-66.. ISBN 978-145036430-0

Nor Hidayati, Abdul Aziz and Nor Azlina, Ab. Aziz and Mohd Falfazli, Mat Jusof and Saifudin, Razali and Zuwairie, Ibrahim and Asrul, Adam and Mohd Ibrahim, Shapiai (2018) An Analysis on the Number of Agents Towards the Performance of the Simulated Kalman Filter Optimizer. In: 8th International Conference on Intelligent Systems, Modelling and Simulation (ISMS2018) , 8-10 May 2018 , Kuala Lumpur, Malaysia. pp. 16-21.. ISBN 978-1-5386-6539-8

Nor Hidayati, Abdul Aziz and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Zulkifli, Md. Yusof and Mohd Saberi, Mohamad (2018) Single-solution simulated Kalman Filter algorithm for routing in printed circuit board drilling process. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 649-655. ISBN 9789811087875

Nor Nazirah, Saidon (2018) Passive distance measurement using low power light emitting diode. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Noraini, Mohd Razali and Siti Murni, Mohamad Khadri and Ee, Toh Con (2018) Six sigma approach to improve stripping quality of automotive electronics component - A case study. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Norfazillah, Talib and Amiril Sahab, Abdul Sani and Erween, Abd Rahim and S. A., Che Ghani and Syahrullail, Samion (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232. (Published)

Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan and Muhammad Irfan, Jaffar (2018) Development and localization of a mobile robot. In: 5 th Mechanical Engineering Research Day (MERD’18) , 03 May 2018 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 121-122.. ISBN 978-967-2145-20-2

Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan and Wan Muhammad Syamim, Wan Ahmad Puzi (2018) Measurement of sand moisture composition for concrete mixture. In: 5 th Mechanical Engineering Research Day (MERD’18) , 03 May 2018 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 119-120.. ISBN 978-967-2145-20-2

Nur Atikah, Nor’Azlan and Nur Asmiza, Selamat and Nafrizuan, Mat Yahya (2018) Multivariable PID controller design tuning using bat algorithm for activated sludge process. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Nur Atiqah, Alias (2018) Noise reduction and cost saving analysis for pneumatic and electrical system of microgrinder at CNC area. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and A., Zulkiple (2018) A preliminary survey on mode choice and its effect in users' satisfaction on their journey to the railway station. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-12., 342 (1). ISSN 1757-899X

Nur Khalidah, Zainuddin and Noor Saadiah, Mohd Ali and Anwar, P. P. Abdul Majeed and Ahmad Salihin, Samsudin (2018) Characterization on conduction properties of carboxymethyl cellulose/kappa carrageenan blend-based polymer electrolyte system. International Journal of Polymer Analysis and Characterization, 23 (4). pp. 321-330. ISSN 1023-666X. (Published)

Nur Soliha, Sahimi and Faiz, Mohd Turan and Kartina, Johan (2018) Framework of Sustainability Assessment (FSA) method for manufacturing industry in Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012079). ISSN 1757-899X

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) Fuzzy logic controller for DC motor position control. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-6.. (Unpublished)

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) Simulation study for controlling direct current motor position utilising fuzzy logic controller. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5989-6000. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) An ergonomics prototype of adjustable chin stands aid for visual mechanical inspection at electronic manufacturing-based company in Kuantan, Malaysia. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-6., 342 (012031). ISSN 1757-899X

Nurainaa, Elias and Nafrizuan, Mat Yahya and Sing, Er Hong (2018) Numerical analysis of fuzzy logic temperature and humidity control system in pharmaceutical warehouse using MATLAB fuzzy toolbox. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 623-629. ISBN 9789811087875

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) Characterization of tin oxide (SnO2) nanostructures prepared by thermal oxidation. In: AIP Conference Proceedings: 6th International Conference on Production, Energy and Reliability, ICPER 2018 , 13 - 14 Aug 2018 , Kuala Lumpur Convention Center, Kuala Lumpur. pp. 1-6., 2035. ISSN 0094243X ISBN 978-073541761-8

Nuraini, Abdullah and Noor Mazni, Ismail and Dewan Muhammad, Nuruzzaman (2018) The influence of growth temperature on the properties of zinc oxide by thermal oxidation. Malaysian Journal of Analytical Sciences, 22 (6). pp. 1084-1089. ISSN 1394 - 2506. (Published)

Nuraini, Abdullah and Noor Mazni, Ismail and Nuruzzaman, D. M. (2018) Preparation of tin oxide (SnO2) thin films using thermal oxidation. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and K., Baarath (2018) A study on the exposure of vertical vibration towards the brain on seated human driver model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 601-609. ISBN 9789811087875

Nurul Akmal, Che Lah and Mohd N. M., Zubir and Mahendran, Samykano (2018) Engineered nanomaterial in electronics and electrical industries. In: Handbook of Nanomaterials for Industrial Applications. Micro and Nano Technologies, 1 (1). Elsevier, pp. 324-364. ISBN 9780128133514

Nurul Hazlina, Noordin and Hwa, L. B. and N., Hassan and Rosdiyana, Samad and Zuwairie, Ibrahim (2018) An RF switching circuit using PIN diode for a 2.4GHz frequency reconfigurable antenna. In: Symposium on Computer Applications & Industrial Electronics (ISCAIE 2018) , 28-29 April 2018 , Penang, Malaysia. pp. 259-262.. ISBN 978-1-5386-3527-8

Nurul Muhayu Ashikin, Rukmi (2018) Optimum parameter setting for potting machine on inductance products. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nurulain, S. and M. S., Najib and Alsibai, Mohammad Hayyan and Mohd Rusllim, Mohamed and M. R., Salim and Hadi, Manap (2018) A potential development of haze detection system using an open-path optical method. International Journal of Recent Technology and Engineering, 7 (4S2). pp. 193-195. ISSN 2277-3878. (Published)

Nuruzzaman, D. M. and Kusaseh, N. and Chowdhury, M. A. and Rahman, N. A. N. A. and Oumer, A. N. and Fatchurrohman, Nanang and Iqbal, A. K. M. A. and N. M., Ismail (2018) Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-7.. (Unpublished)

O

Oktaviandri, Muchamad and Aidil Shafiza, Safiee (2018) Modelling electrical energy consumption in automotive paint shop. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (012060). ISSN 1757-8981 (Print); 1757-899X (Online)

Otaka, Kotaro and Ahmad Najmuddin, Ibrahim and Inoue, Kousuke and Fukuoka, Yasuhiro (2018) Adaptive serpentine locomotion of a snake robot involuntarily activated and modified through sensory feedback affected by longitudinal frictional anisotropy. In: 2018 IEEE International Conference on Robotics and Biomimetics; ROBIO 2018 , 12 - 15 December 2018 , Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia. pp. 1795-1801. (8664830). ISBN 9781728103761

P

Prasada Rao, A. K. and W. Q., Ain and M. K., Faisal and B. I., Mazni (2018) Undiluted recycling of aluminum scrap alloy using Hume-Rothery’s rule. Metallography, Microstructure, and Analysis, 7 (2). pp. 239-244. ISSN 2192-9262 (Print); 2192-9270 (Online). (Published)

R

R., Rifin and Fang, T. E. and A. F. Z., Abidin and Asrul, Adam and M. A., Majid and A., Zainuddin and S. H., Mohammad and M. H., Harun and Z. I., Rizman (2018) Examwiz: a development and implementation of an android based examination. Journal of Fundamental and Applied Sciences, 10 (6S). pp. 965-976. ISSN 1112-9867. (Published)

Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohd Azraai, M. Razman and Mohd Ali Hanafiah, Shaharudin (2018) Match outcomes prediction of six top English Premier League clubs via machine learning technique. In: The 6th International Conference On Robotics Intelligence And Applications 2018 , 15-19 Disember 2018 , Putrajaya, Malaysia. pp. 1-10.. (Unpublished)

Radhiyah, Abd Aziz and Maisalsadila, Ismail (2018) Effect of Ferritic - Martensitic Constituent on Mechanical Property and Corrosion Behaviour of Medium Carbon Dual Phase (DP) Steel. Saudi Journal of Engineering and Technology, 3 (3). pp. 188-191. ISSN 2415-6264 . (Published)

Radhiyah, Abd Aziz and Nurul Farahin, Zamrud and Nurrina, Rosli (2018) Comparison on cooling efficiency of cooling pad materials for evaporative cooling system. Journal of Modern Manufacturing Systems and Technology, 1. pp. 61-68. ISSN 2636-9575. (Published)

Radhiyah, Abd Aziz and Ramprabhu, Kandasan and Nurrina, Rosli (2018) Development of TiO2 coated activated carbon foam as cooling pad for direct evaporative cooling system. Journal of Modern Manufacturing Systems and Technology, 1. pp. 52-60. ISSN 2636-9575. (Published)

S

S., Sha'akmal and Ali, Mohammed A. H. and A. R., M. Sawal (2018) Modeling and design of two link robotic manipulator for grading and sorting of rotationally symmetric products. In: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 1-8.. (Unpublished)

S. K., Lim and M. F., Zamri and A. R., Yusoff (2018) Numerical simulation of hot press forming process for quenchable sheet metal between nanocoolant and chilled water. In: 9th International Conference on Nanoscience & Nanotechnology (NANO-SCIETECH 2018) , 26 February - 1 March 2018 , UiTM, Shah Alam. pp. 1-2.. (Unpublished)

Samsiah, Suaily and Siti Zubaidah, Ismail (2018) Development of Product Service System Modelling in SMED: The Case of Inventory Control. Journal of Modern Manufacturing Systems and Technology (JMMST), 1. pp. 94-106. ISSN 2636-9575. (Published)

Saptaji, Kushendarsyah and Mebrahitom, A. and Azmir, Azhari (2018) Machining of biocompatible materials: a review. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2255-2292. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Sha’Akmal, S. and Ali, Mohammed A. H. and M. Sawal, A. R. and A. Azwan, A. Razak (2018) A review on control of robotic manipulator for performing grading and sorting of rotational symmetric products. In: 14th World Conference On Applied Science, Engineering And Technology , 21-22 November 2018 , Kual Lumpur. pp. 1-6.. (Unpublished)

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Khairatul Atika, Ahmad Kamal and Ahmad Shahrizan, Abdul Ghani (2018) Implementation of aggregate channel feature (ACF) function detector feature-based vehicle detection for an autonomous vehicle detection. In: 10th National Technical Seminar on Underwater System Technology 2018 (NUSYS'18) , 26 - 27 September 2018 , Universiti Malaysia Pahang. pp. 1-15.. (Unpublished)

Sundarajoo, Suresh and Ahmad Shahrizan, Abdul Ghani (2018) Improvement of Auto-Tracking Mobile Robot based on HSI Color Model. Indonesian Journal of Electrical Engineering and Computer Science, 12 (3). pp. 1349-1357. ISSN 2502-4752. (Published)

T

Tan, Jun Qi and Mohd Yazid, Abu (2018) Performance evaluation of wire electrical discharge machining on Titanium Alloy. Journal of Modern Manufacturing Systems and Technology, 1. pp. 27-38. ISSN 2636-9575. (Published)

Tan, Sien Siang and Ali, Mohammed A. H. (2018) Smart mobile robot system for rubbish collection. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-9., 319 (1). ISSN 17578981

Tan, Z Q and Nurrina, Rosli and Muchamad, Oktaviandri (2018) Simulation on effect of preform diameter in injection stretch blow molding. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319 (1). ISSN 17578981

Tasiransurini, Ab Rahman and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Nor Hidayati, Abdul Aziz and Suad Khairi, Mohammed and Badaruddin, Muhammad and Zulkifli, Md. Yusof (2018) A Study on the Effect of Local Neighbourhood Parameter towards the Performance of SAFIRO. International Journal of Engineering & Technology, 7 (4.27). pp. 30-37. ISSN 2227-524X. (Published)

Tasiransurini, Ab Rahman and Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Zhao, Shunyi and Nor Hidayati, Abdul Aziz (2018) Single-agent finite impulse response optimizer for numerical optimization problems. IEEE Access, 6. pp. 9358-9374. ISSN 2169-3536. (Published)

U

Umar Zakir, Abdul Hamid and Fakhrul Razi, Ahmad Zakuan and Khairul Akmal, Zulkepli and Muhammad Zulfaqar, Azmi and Hairi, Zamzuri and Mohd Azizi, Abdul Rahman and Muhammad Aizzat, Zakaria (2018) Multi-actuators vehicle collision avoidance system - Experimental validation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-11., 342 (1). ISSN 17578981

Umar Zakir, Abdul Hamid and Mohammad Hatta, Mohammed Ariff and Hairi, Zamzuri and Saito, Yuichi and Muhammad Aizzat, Zakaria and Mohd Azizi, Abdul Rahman and Raksincharoensak, Pongsathorn (2018) Piecewise Trajectory Replanner for Highway Collision Avoidance Systems with Safe-Distance Based Threat Assessment Strategy and Nonlinear Model Predictive Control. Journal of Intelligent and Robotic Systems: Theory and Applications, 90 (3-4). pp. 363-385. ISSN 1573-0409. (Published)

W

Wan Nurul Syahirah, Wan Lanang and Faiz, Mohd Turan and Kartina, Johan (2018) Incorporating attitudinal parameter in assessing sustainability of Malaysia manufacturing industry. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-8., 342 (012076). ISSN 1757-899X

Wei, Jie Woon and Siti Zubaidah, Ismail (2018) Development of Product Resource Inventory Control Using Forecasting In ‘SMED’. Journal of Modern Manufacturing Systems and Technology, 1. pp. 82-93. ISSN 2636-9575. (Published)

Z

Zahari, Taha and M. A. M., Razman and Ahmad Shahrizan, Abdul Ghani and A. P. P., Abdul Majeed and R. M., Musa and F. A., Adnan and M. F., Sallehudin and Y., Mukai (2018) The classification of hunger behaviour of Lates Calcarifer through the integration of image processing technique and k-Nearest Neighbour learning algorithm. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-5., 342 (012017). ISSN 1757-8981

Zahari, Taha and M. A. M., Razman and F. A., Adnan and Ahmad Shahrizan, Abdul Ghani and Anwar, P. P. Abdul Majeed and R. M., Musa and M. F., Sallehudin and Mukai, Y. (2018) The Identification of Hunger Behaviour of Lates Calcarifer through the Integration of Image Processing Technique and Support Vector Machine. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012028). ISSN 1757-899X

Zahari, Taha and Mohd Azraai, M. Razman and N. F., Adnan (2018) The Identification of hunger behaviour of lates calcarifer using k-nearest neighbour. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 393-399. ISBN 9789811087875

Zahari, Taha and Muhammad Muaz, Alim and Anwar, P. P. Abdul Majeed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Mohd Ali Hanafiah, Shaharudin and M. H. A., Hassan (2018) The identification and control of a finger exoskeleton for grasping rehabilitation. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 177-182. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Ahmad Fakhri, Ab. Nasir and M. H. A., Hassan (2018) Classification of high performance archers by means of bio-physiological performance variables via k-nearest neighbour classification model. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 377-384. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and M. H. A., Hassan (2018) Talent identification of potential archers through fitness and motor ability performance variables by means of artificial neural network. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 371-376. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan (2018) The application of support vector machine in classifying potential archers using bio-mechanical indicators. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 385-391. ISBN 9789811087875

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Amirul, Abdullah and M. H. A., Hassan and Zubair, Khalil (2018) The employment of Support Vector Machine to classify high and low performance archers based on bio-physiological variables. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012020). ISSN 1757-899X

Zahari, Taha and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Muaz, Alim and Ahmad Fakhri, Ab. Nasir (2018) The application of k -Nearest Neighbour in the identification of high potential archers based on relative psychological coping skills variables. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012019). ISSN 1757-899X

Zahari, Taha and Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Mohamad Razali, Abdullah and Muhammad Aizzat, Zakaria and Muhammad Muaz, Alim and Jessnor Arif, Mat Jizat and Mohamad Fauzi, Ibrahim (2018) The identification of high potential archers based on relative psychological coping skills variables: A Support Vector Machine approach. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-6., 319.

Zahari, Taha and Rabiu Muazu, Musa and Anwar, P. P. Abdul Majeed and Muhammad Muaz, Alim and Mohamad Razali, Abdullah (2018) The Identification of High Potential Archers Based on Fitness and Motor Ability Variables: A Support Vector Machine Approach. Human Movement Science, 57. pp. 184-193. ISSN 0167-9457. (Published)

Zainal Ariffin, Selamat (2018) Optimization of lubrication techniques on machining performance of aluminium alloy 319. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zainal Ariffin, Selamat and A. R., Yusoff and Mohd Ali, M. and Efendee, A. M. and M. M., Rahman (2018) Optimization of Coolant Technique Conditions for Machining A319 Aluminium Alloy Using Response Surface Method (RSM). In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (012039). ISSN 1757-899X

Zainal Fahmi, Zainol Abidin and M. Nafis, O. Z. (2018) Real time object customization in cad software via visual basic programming. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 91-92.. ISBN 9789672145202

Zamzuri, Hamedon and Azmir, Azhari and A. R., Yusoff (2018) In-Situ Measurement of Electrode Wear During EDM Drilling using Vision System. Journal of Advanced Manufacturing Technology, 12 (1). pp. 513-524. ISSN 2289-8107. (Published)

Zamzuri, Hamedon and I., Razemi and Ahmad Rosli, Abdul Manaf and Nafrizuan, Mat Yahya (2018) Innovative method of measuring electrode wear during EDM drilling process using vision system. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 53-63. ISBN 9789811087875

Zamzuri, Hamedon and Shea, Cheng Kuang and Hasnulhadi, Jaafar and Azmir, Azhari (2018) Optimization of surface roughness and wall thickness in dieless incremental forming of aluminum sheet using taguchi. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 17578981

Zamzuri, Hamedon and Yohei, Abe and Ken-Ichiro, Mori and Naoya, Nakagawa (2018) Thickened holes edge including compressed rollover for improving tensile fatigue strength of thick sheet. In: Metal Forming 2018, 17th International Conference On Metal Forming , 16 -19 September 2018 , Loisir Hotel Toyohashi, Toyohashi, Japan. pp. 1-7..

Zuryaty, Zol (2018) Kunjungan FKP ke Universiti Indonesia jalin kerjasama antarabangsa. UMP News . (Unpublished)

Zuryaty, Zol (2018) Seminar Antarabangsa iMEC-APCOMS perkasa bidang kejuruteraan pembuatan. UMP News . (Unpublished)

Zuwairie, Ibrahim and Kamil Zakwan, Mohd Azmi and Badaruddin, Muhammad and Mohd Falfazli, Mat Jusof and Nor Azlina, Alias and Nor Hidayati, Abdul Aziz and Mohd Ibrahim, Shapiai (2018) An oppositional learning prediction operator for simulated kalman filter. In: 3th International Conference on Computational Intelligence and Applications 2018 , 28 - 30 July 2018 , Hong Kong. pp. 1-5.. (Unpublished)

Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Nor Hidayati, Abd Aziz and Tasiransurini, Ab Rahman (2018) Asynchronous simulated kalman filter optimization algorithm. International Journal of Engineering and Technology(UAE), 7 (4). pp. 44-49. ISSN 2227524X. (Published)

Zuwairie, Ibrahim and Suad Khairi, Mohammed and Badaruddin, Muhammad and Nor Azlina, Ab. Aziz and Nor Hidayati, Abdul Aziz and Tasiransurini, Ab Rahman and Norazian, Subari (2018) A simulated Kalman filter optimizer with white hole operator. International Journal of Engineering & Technology (IJET), 7 (4.36). pp. 420-425. ISSN 2227-524X. (Published)

Zuwairie, Ibrahim and Suad Khairi, Mohammed and Norazian, Subari and Asrul, Adam and Zulkifli, Md. Yusof and Nor Azlina, Ab Aziz and Nor Hidayati, Abdul Aziz and Tasiransurini, Ab Rahman and Mohd Ibrahim, Shapiai and Norrima, Mokhtar (2018) A survey on applications of black hole algorithm. In: International Conference on Artificial Life and Robotics (ICAROB2018) , 1-4 February 2018 , B-Con Plaza, Beppu, Oita, Japan. pp. 245-248.. (Unpublished)

Zuwairie, Ibrahim and Suad Khairi, Mohammed and Norazian, Subari and Nor Azlina, Ab Aziz and Nor Hidayati, Abdul Aziz and Tasiransurini, Ab Rahman and Asrul, Adam and Zulkifli, Md. Yusof and Mohd Ibrahim, Shapiai and Norrima, Mokhtar (2018) A review on fundamental advancements of black hole algorithm. In: International Conference on Artificial Life and Robotics (ICAROB2018) , 1-4 February 2018 , B-Con Plaza, Beppu, Oita, Japan . pp. 241-244.. (Unpublished)

Zuwairie, Ibrahim and Zulkifli, Md. Yusof and Asrul, Adam and Kamil Zakwan, Mohd Azmi and Tasiransurini, Ab Rahman and Badaruddin, Muhammad and Nor Azlina, Ab. Aziz and Norrima, Mokhtar and Mohd Ibrahim, Shapiai and Mohd Saberi, Mohamad (2018) Distance evaluated simulated kalman filter with state encoding for combinatorial optimization problems. International Journal of Engineering and Technology(UAE), 7 (4). pp. 22-29. ISSN 2227524X. (Published)