Items where Division is "Faculty of Manufacturing and Mechatronic Engineering Technology" and Year is 2022
 | Up a level |
A
Ab Rahman, Nur Naajihah and Nafrizuan, M. Y. and Zainal Abidin, Nuril Aqilah (2022) Investigation of the performance of PID control scheme for linear conveyor system of manufacturing shopfloor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 1-7. ISSN 2637-0883. (Published)
Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Chilakamarry, Chaitanya Reddy and Siti Nadiah, Mohd Saffe (2022) Experimental investigation on magnetorheological finishing process parameters. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1892-1898., 48 (Part 6). ISSN 2214-7853 (Published)
Abdul Wahab, Hashmi and Mali, Harlal Singh and Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Machine vision for the measurement of machining parameters: A review. Materials Today: Proceeding, 56 (4). pp. 1939-1946. (Published)
Abdul Wahab Hashmi, Hashmi and Harlal Singh Mali, Harlal Singh and Anoj Meena, Anoj and Khilji, Irshad Ahamad and Mohammad Farukh, Hashmi and Siti Nadiah, Mohd Saffe (2022) Artificial intelligence techniques for implementation of intelligent machining. Materials Today: Proceeding, 56 (4). pp. 1947-1955. ISSN 2214-7853. (Published)
Abdullah, Z. and Peeie, M. H. and Zakaria, M. A. and Ishak, M. I. and Shahrom, M. A. and Kujunni, B. (2022) Motion planning and tracking trajectory of an autonomous emergency braking pedestrian (AEB-P) system based on different brake pad friction coefficients on dry road surface. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 10002 -10013. ISSN 2180-1606. (Published)
Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 949-956., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Afrouzeh, Mohsen and Konukman, Ferman and Musa, Rabiu Muazu and Suppiah, Pathmanathan K. and P.P. Abdul Majeed, Anwar and Mohd Azraai, Mohd Razman (2022) Kinematic variables defining performance of basketball free-throw in novice children : An information gain and logistic regression analysis. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 949-956., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Ahamad Khilji, Irshad and Siti Nadiah, Mohd Saffe and Reddy Chilakamarry, Chaitanya and Siti Aishah, Rusdan (2022) The crashworthiness performance of the energy-absorbing composite structure—A review. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering (LNME) . Springer, Singapore, Singapore, pp. 637-650. ISBN 978-981-19-2889-5 (Print); 978-981-19-2890-1(Online)
Ahmad Noor Syukri, Zainal Abidin and Arief Hakimi, Azmi and Khairil Anwar, Abu Kassim and Ahmad Shahir, Jamaludin and Mohd Nizari, Mhd Razal (2022) A Review on Automotive Tires Significant Characteristic Identification for General Consumers. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 375-385.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (In Press / Online First) (In Press / Online First)
Ahmad Ridhauddin, Abdul Rauf and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Mohd Hafiz, Arzmi and Abdul Majeed, Anwar P. P. (2022) The classification of oral squamous cell carcinoma (OSCC) by means of transfer learning. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 386-391., 429. ISBN 978-303097671-2 (Published)
Ahmad Shahrizan, Abdul Ghani and Ismail Mohd., Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Jessnor Arif, Mat Jizat and Mohd. Azraai, Mohd. Razman and Muhammad Aizzat, Zakaria and Wan Hasbullah, Mat Isa and Anwar P. P., Abdul Majeed (2022) Enabling Industry 4.0 through Advances in Mechatronics. LNEE, 1 (1). Springer Singapore, Springer Link. ISBN 1876-1100
Ahmad Shahrizan, Abdul Ghani and Muhammad Daniel Naim, Zulkifflee (2022) Investigation on data acquisition accuracy for long range communication using RFM LoRa. In: 2022 8th International Conference on Control, Decision and Information Technologies, CoDIT 2022 , 17-20 May 2022 , Istanbul. pp. 320-325. (180591). ISBN 978-166549607-0 (Published)
Aina Najwa, Nadzri and Mohd Jamil Mohamed, Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2022) Simulation of Craniectomy Size in Decompressive Craniectomy for Ischaemic Stroke. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 599-607.. ISBN 978-981-19-2890-1 (Published)
Ainur Munira, Rosli (2022) Microcutting performance monitoring – investigation on tool failure criterion. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaludin).
Aisha, Muhammad (2022) A generalized laser simulator algorithm for optimal path planning in constraints environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammed Abdo, Hashem).
Akm Asif, Iqbal and Norfatihah, Ismail (2022) Mechanical properties and corrosion behavior of silica nanoparticle reinforced magnesium nanocomposite for bio-implant application. Materials, 15 (8164). pp. 1-11. ISSN 1996-1944. (Published)
Alam, Mohammad Khurshed and M. H., Mohammed Faozi and A. R., Yusoff and M. Z., Zainol and Z., Khalil (2022) Fault Detection for Automotive Coil Spring Using Signal Processing Analysis. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 415-426.. ISBN 978-981-19-2890-1 (Published)
Alhamed, Abdulrahman and Mohd Romlay, Fadhlur Rahman and Muhammad, Khairul Fikri and Mohd Zawawi, Mohd Zairulnizam and Ishak, I. (2022) Support-free fused deposition modelling printing for overhangs structure. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 64-71. ISSN 2637-0883. (Published)
Ali Ibrahim, Muhammad Naqiuddin and Najib, M. S. and Mohd Daud, Suhaimi (2022) Correlation investigation of odour-profile and temperature intensity. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 48-57. ISSN 2637-0883. (Published)
Ali Imran, Awaludin and S. H., Tomadi and Rosdi, D. and Mas Ayu, H. (2022) Analysis and simulation of temperature distribution and stress development in wire edm of tungsten carbide. In: Journal of Physics: Conference Series, Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021 , 16-17 December 2021 , Virtual Conference. pp. 1-12., 2312 (012046). ISSN 1742-6588 (Published)
Alisha, E. and Najwa, N. and Jamaludin, A. S. and Razali, M. N. M. and Saffe, S. N. M. (2022) Analysis on auger pump performance during handling high viscous liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 48-54. ISSN 2636-9575. (Published)
Almanifi, Omair Rashed Abdulwareth and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Abdul Majeed, Anwar P. P. (2022) Heartbeat murmurs detection in phonocardiogram recordings via transfer learning. Alexandria Engineering Journal, 61 (12). pp. 10995-11002. ISSN 1110-0168. (Published)
Almanifi, Omair Rashed Abdulwareth and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Anwar, P. P. Abdul Majeed (2022) Human activity recognition based on wrist PPG via the ensemble method. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)
Almuallim, Basel and Wan Sharuzi, Wan Harun and Al Rikabi, Ihab Jabbar and Mohammed, Hussein A. (2022) Thermally conductive polymer nanocomposites for filament-based additive manufacturing. Journal of Materials Science, 57 (6). 3993 -4019. ISSN 0022-2461. (Published)
Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Alzaghir, Abdullah Faisal and Mohd Nazir, Mat Nawi and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2022) Optimization of waterjet paint removal operation using artificial neural network. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 11-20., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltier-based cooling refrigerator supplied by small scale PV. In: Engineering Technology International Conference (ETIC 2022). Engineering Technology International Conference (ETIC 2022) , 7-8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 159-163., 2022. ISBN 978-1-83953-782-0 (Published)
Amerrudin, Azizi and Norazlianie, Sazali and Mohd Nizar, Mhd Razali and Muhamad Zahim, Sujod and Ahmad Afif, Mohd Faudzi and Siregar, Januar Parlaungan (2022) Investigation of stabilizing internal temperature and humidity of peltierbased cooling refrigerator supplied by small scale PV. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 159-163., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
Amiera Azwa, Abdul Ghafar and Noraini, Mohd Razali (2022) The significant of lean practice on the sustainability performance in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 83-89. ISSN 2636-9575. (Published)
Amiir Haamzah, Mohamed Ismail and Anwar, P. P. Abdul Majeed and E. H., Yap and A. H. P., Tan and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and M. A., Abdullah (2022) The employment of transfer learning for Covid-19 diagnostics: A ResNet evaluation. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 128.. (Published)
Amiril Sahab, Abdul Sani and Shahandzir, Baharom and Noor Asimah, Mamat and Amirah Sakinah, Mohd Rozlan and Norfazillah, Talib (2022) Comparative evaluation of crude Tamanu oil performance as metalworking fluids. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1783-1788., 48 (Part 6). ISSN 2214-7853 (Published)
Amiril Sahab, Abdul Sani and Zubaidah, Zamri and Puteri Humairah, Megat Ahmad Radzi and Ainaa Mardhiah, Sabri and Norfazillah, Talib (2022) Modified Tamanu Plant-Based Oil from Pahang Malaysia as biodegradable metalworking fluids. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics & Material Forum 2022, iM3F 2022 , 20 - 20 July 2022 , Pekan, Pahang. 39 -45., 75 (149158). ISSN 2214-7853 (Published)
Anati, N. and Aqida, S. N. and Ismail, Nurazima and Kasim, M. S. (2022) Mechanical characterisation of water-jet shot peened H13 tool steel surface. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9122 -9128. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Anuar, Mohamed and Nur Aqilah, Othman and Hamzah, Ahmad and Mohd Hasnun Ariff, Hassan (2022) Investigation of the optimal sensor location and classifier for human motion classification. In: ICCSCE 2022 - Proceedings: 2022 12th IEEE International Conference on Control System, Computing and Engineering , 21-22 October 2022 , Penang. pp. 142-146. (184194). ISBN 978-166548339-1 (Published)
Anwar, M. Shahril and Rasid, Mohd Azri Hizami (2022) Evaluation of direct-quadrature position and saturation of a SynRM machine with segmented rotor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 1-5. ISSN 2637-0883. (Published)
Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Mohamad Heerwan, Peeie and Papaioannou, Gerogious (2022) Investigating vehicle characteristics behaviour for roundabout cornering. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. 519 -528., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Ayasrah, Omar and Faiz, Mohd Turan (2022) Assessing integrated TOPSIS Model with exponential intuitionistic entropy measure: A case study. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-57., 1. ISBN 978-981-19-2890-1 (Published)
Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Lean management in quality improvement of cutting and hot forming process for window tint. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 70.. (Published)
Azizol Heirey, Bahari and Zamzuri, Hamedon (2022) Quality improvement in cutting process of window tint using DMAIC approach. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 17-20., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
B
Baharuddin, N. J. and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2022) Study on die shoulder patterning method (DSPM) to minimise springback of U-bending. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9509-9518. ISSN 2180-1606. (Published)
C
Chilakamarry, Chaitanya Reddy and Dr. Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid and Ahamad Khilji, Irshad (2022) Growth profile study of Escherichia Coli K12 by optical density measurement. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 85.. (Published)
Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Irshad Ahamad, Khilji and Noormazlinah, Ahmad (2022) Advances in solid-state fermentation for bioconversion of agricultural wastes to value-added products: Opportunities and challenges. Bioresource Technology, 343 (126065). pp. 1-11. ISSN 0960-8524. (Published)
Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Khilji, Irshad Ahamad and Kumarasamy, Sudhakar (2022) Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method. Journal of Chemistry, 2022. pp. 1-11. ISSN 2090-9071. (Published)
Chin, Hau Lim and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The Classification of Hallucination: The Identification of Significant Time-Domain EEG Signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 989-997., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Choon, Cheow Shek and Ismayuzri, Ishak (2022) Feasibility study of CO, CO2, NO2 and O2 sensors for hazardous gas detection system in vehicle cabin. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 537-547., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Choong, Chun Sern and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman (2022) Investigation of features for classification RFID reading between two RFID reader in various support vector machine kernel function. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 127-139., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Cionita, Tezara and Siregar, Januar Parlaungan and Wong, Ling Shing and Cheng, Wan Hee and Fitriyana, Deni Fajar and Jamiluddin, Jaafar and Ramli, Junid and Irawan, Agustinus Purna and Hadi, Agung Efriyo (2022) The influence of filler loading and alkaline treatment on the mechanical properties of palm kernel cake filler reinforced epoxy composites. Polymers, 14 (3063). pp. 1-17. ISSN 2073-4360. (Published)
E
Emilawati, Othman and Nik Nor Fatihah, Nik Mood and Radhiyah, Abd Aziz (2022) Investigation the effect of different fraction EG : H the stability of tio2 nanofluid. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 118.. (Published)
Eswaramoorthi, Vijayamurugan and Kuan, Garry and Mohamad Razali, Abdullah and Anwar, P. P. Abdul Majeed and Suppiah, Pathmanathan K. and Musa, Rabiu Muazu (2022) Design and validation of a virtual physical education and sport science–related course: A learner’s engagement approach. International Journal of Environmental Research and Public Health, 19 (13). pp. 1-16. ISSN 1661-7827. (Published)
Eswaramoorthi, Vijayamurugan and Muhammad Zulhusni, Suhaimi and Mohamad Razali, Abdullah and Zulkefli, Sanip and Anwar, P. P. Abdul Majeed and Muhammad Zuhaili, Suhaimi and Clark, Cain C. T. and Musa, Rabiu Muazu (2022) Association of physical activity with anthropometrics variables and health-related risks in healthy male smokers. International Journal of Environmental Research and Public Health, 19 (12). pp. 1-15. ISSN 1661-7827. (Published)
F
Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Anith Khairunnisa, Ghazali and Zuwairie, Ibrahim (2022) Indoor comfort and energy consumption optimization using an inertia weight artificial bee colony algorithm. Algorithms, 15 (395). pp. 1-21. ISSN 1999-4893. (Published)
Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Mamunur, Rashid and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 583-591., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Farhan Anis, Azhar and Mahfuzah, Mustafa and Norizam, Sulaiman and Rashid, Mamunur and Bari, Bifta Sama and Islam, Md Nahidul and Hasan, Md Jahid and Nur Fahriza, Mohd Ali (2022) The Classification of Electrooculogram (EOG) through the application of Linear Discriminant Analysis (LDA) of selected time-domain signals. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 583-591., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Abdul Majeed, Anwar P. P. (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 392-397., 429 LNNS (276219). ISSN 2367-3370 ISBN 978-303097671-2 (Published)
Farhan Nabil, Mohd Noor and Wan Hasbullah, Mohd Isa and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar (2022) The diagnosis of diabetic retinopathy : An evaluation of different classifiers with the inception V3 model as a feature extractor. In: Lecture Notes in Networks and Systems. 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16 - 17 December 2021 , Daejeon. pp. 392-397., 429 LNNS. ISSN 2367-3370 ISBN 978-303097671-2 (Published)
Fazilah, Abdul Aziz and Nur Aisyah Mardhiah, Halim (2022) Consequences of risk factors related to prolonged computer use on musculaokeletal pain in public unversity students: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 69-75. ISSN 2636-9575. (Published)
Fazilah, Abdul Aziz and Nur Aqila, Nor Azmi (2022) The impact of risk factors associated with long-term computer use on musculoskeletal discomfort among administrative staff: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 7-17. ISSN 2636-9575. (Published)
Fukuoka, Yasuhiro and Komatsu, Ryunosuke and Machii, Kenta and Yokota, Masaaki and Tobe, Masaki and Ahmad Najmuddin, Ibrahim and Fukui, Takahiro and Habu, Yasushi (2022) Pace running of a quadruped robot driven by pneumatic muscle actuators : An experimental study. Applied Sciences (Switzerland), 12 (9). pp. 1-17. ISSN 2076-3417. (Published)
Fukuoka, Yasuhiro and Oshino, Kazuyuki and Ahmad Najmuddin, Ibrahim (2022) Negotiating uneven terrain by a simple teleoperated tracked vehicle with internally movable center of gravity. Applied Sciences (Switzerland), 12 (1). pp. 1-16. ISSN 2076-3417. (Published)
H
Haizad, Hassim and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum milling parameters in micro dimples machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 73- 81. ISSN 2636-9575. (Published)
Hamzah, Ahmad and Mohd Syakirin, Ramli and Nur Aqilah, Othman and Badaruddin, Mohamad and Mohd Mawardi, Saari (2022) Intermittent measurement and finite escape time correlations study in H∞ filter in navigation. In: Lecture Notes in Electrical Engineering; 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021 , 23 August 2021 , Kuantan, Pahang. pp. 601-611., 842 (274719). ISSN 1876-1100 ISBN 978-981168689-4 (Published)
Hasnulhadi, Jaafar and Liyana, Tajul and Mohd, Zamzuri and Zailani Zainal, Abidin and Muhamad Nasir, Murad and Zamzuri, Hamedon (2022) Effect of small corner radius in cold punching of 22MnB5 die-quenched boron steel sheets. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 90-93., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Hassan Murshid, Zsa Zsa Nura’in and Ismail, Siti Zubaidah (2022) Investigating efficiency of materials management at original equipment manufacturer (OEM). Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 18-25. ISSN 2636-9575. (Published)
How, Chun Kit and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Development of audio-visual speech recognition using deep-learning technique. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 88-95. ISSN 2637-0883. (Published)
Hung, William Chin Wei and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak and Mohamad Heerwan, Peeie (2022) Object tracking for autonomous vehicle using YOLO V3. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang, Kuantan. pp. 265-273., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Hussin, N.F.R. and Rosli, N. (2022) Study of underfill flow in microchip packaging using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 76-82. ISSN 2636-9575. (Published)
Hwa, Phua Jia and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2022) The classification of electrooculography signals: A significant feature identification via mutual information. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 1005 -1012., 730. ISSN 1876-1100 ISBN 978-981-33-4596-6 (Published)
I
I. A., Kamaruddin and Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Abbas, Abdul Wahab (2022) Evaluation of a DC Motor temperature response characterization method under different sampling interval. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 345-360., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Iqbal, A. R. and Muhammad, Khairul Fikri (2022) Analysis and design of control system for desktop size concrete 3D printer. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 80-87. ISSN 2637-0883. (Published)
Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Cionita, Tezara and Siregar, Januar Parlaungan and Laksmidewi, Dwinita and Baskara, Gregorius Dimas and Mohd Zulkifly, Abdullah and Ramli, Junid and Hadi, Agung Efriyo and Mohammad Hazim, Mohamad Hamdan and Najid, Najid (2022) Overview of the important factors influencing the performance of eco-friendly brake pads. Polymers, 14 (1180). pp. 1-22. ISSN 2073-4360. (Published)
Isarji, Sarudin and Amir Akramin, Shafie and Zainab, Mohd Noor and Mohd Azmir, Mohd Azhari and Masria, Mustafa and Rozzana, Mohd Said and Nik Aloesnita, Nik Mohd Alwi (2022) Mapping Integration of Sustainable Development Goals for Engineering Programmes at International Islamic University Malaysia (IIUM). In: 5th International Conference on Engineering Professional Ethics And Education (ICEPEE’22) , 9-10 August 2022 , Virtual Conference. pp. 1-7.. (Accepted)
J
Jagathesvaran, Veeramony and M. Nafis, O. Z. (2022) A customizable controller for 3 axis modular CNC machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 55-62. ISSN 2636-9575. (Published)
Javed, Omama and Abd Aziz, Radhiyah (2022) Review: Two-dimensional layered material based electrodes for lithium ion and sodium ion batteries. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 399-418., 882. ISSN 1876-1100 ISBN 978-981191576-5 (Published)
Javed, Omama and Radhiyah, Abd Aziz (2022) Bimetallic Prussian Blue Analogues: An Efficient Electrode Alternative for Energy Storage Applications. Materials Science Forum, 1056. pp. 45-52. ISSN 1662-9752. (Published)
Javed, Omama and Radhiyah, Abd Aziz (2022) Effect of graphene oxide loading on cobalt oxide performance as electrocatalyst for methanol oxidation reaction. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 126.. (Published)
Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund and Lim, Shi Xuen (2022) Evaluation of the Transfer Learning Models in Wafer Defects Classification. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 873-881., 730. ISBN https://doi.org/10.1007/978-981-33-4597-3_78 (Published)
Junita, Mohd Said and Faiz, Mohd Turan (2022) Optimising MIG weld bead geometry of hot rolled carbon steel using response surface method. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 179-188.. ISBN 978-981-19-2890-1 (Published)
K
Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 553- 560., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Kai, Gavin Lim Jiann and Ahmad Fakhri, Ab. Nasir and P.P. Abdul Majeed, Anwar and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Li, Lim Thai (2022) The classification of impact signal of 6 DOF cobot by means of machine learning model. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021through 20 September 2021 , Gambang. pp. 553-560., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Kai, Gavin Lim Jiann and Mahendra Kumar, Jothi Letchumy and Rashid, Mamunur and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Abdul Majeed, Anwar P. P. (2022) The classification of blinking: an evaluation of significant time-domain features. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. 999 -1004., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Chilakamarry, Chaitanya Reddy and Amiril Sahab, Abdul Sani and Reddy, Venugopal Jayarama (2022) Facile manufacture of oxide-free Cu particles coated with oleic acid by electrical discharge machining. Micromachines, 13 (6). pp. 1-10. ISSN 2072-666X. (Published)
Khilji, Irshad Ahamad and Siti Nadiah, Mohd Saffe and Pathak, Sunil and Ţălu, Ştefan and Kulesza, Slawomir and Bramowicz, Miroslaw and Venugopal Jayarama, Reddy (2022) Titanium alloy particles formation in electrical discharge machining and fractal analysis. The Journal of The Minerals, Metals & Materials Society (TMS), 74. pp. 448-455. ISSN 1543-1851. (Published)
Kiethson, Branden Adems and Mohd Khairuddin, Ismail and Anwar P. P., Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Artificial intelligence approach for fire monitoring and warning system design. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 58-63. ISSN 2637-0883. (Published)
Kwan, Ze Zhen and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Design a precision motion control of an upper limb robotic arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 6-15. ISSN 2637-0883. (Published)
L
L., Sandanamsamy and W. S. W., Harun and I., Ishak and F. R. M., Romlay and K., Kadirgama and D., Ramasamy and S. R. A., Idris and F., Tsumori (2022) A comprehensive review on fused deposition modelling of polylactic acid. Progress in Additive Manufacturing. pp. 1-25. ISSN 2363-9520. (Published)
Laila Fadhillah, Ulta Delestri and Foo, Ngai Kok and Al Abed, Amr and Dokos, Socrates and Mohd Jamil, Mohamed Mokhtarudin and Bressloff, Neil W. and Azam, Ahmad Bakir (2022) Computational analysis of the effect of cardiac motion on left main coronary artery hemodynamics. In: Computing in Cardiology. Computing in Cardiology; 2022 Computing in Cardiology, CinC 2022 , 4 - 7 September 2022 , Tampere, Finland. pp. 1-4., 49 (September). ISSN 2325-8861 ISBN 979-835030097-0 (Published)
Lee, Helen May Shian and Syarifah Nur Hasanah, Syed Kamarudin and Mohd Zairulnizam, Mohd Zawawi (2022) Experimental and Numerical Simulation of Hot Embossing for Fabrication of Glass Microlens Array. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2022) , 20 July 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-4.. ISBN 978-1-83953-781-3 (Published)
Lee, Jie Ying and Ahmad Rosli, Abdul Manaf (2022) Investigation of optimum EDM die sinking parameters in micro dimple machining. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 58-65. ISSN 2636-9575. (Published)
Lee May Shian, Helen and Aina Aishah, Maharon and Raja Murfiqah, Raja Mohd Fouzy and Norfazilasari, Yasman and Mohd Zairulnizam, Mohd Zawawi (2022) Fabrication of glass microlens array using laser-assisted contactless hot embossing. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 86.. (Published)
Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)
M
M., Faris and Fadhlur Rahman, Mohd Romlay and Akhtar Razul, Razali and M. R., Hanifah and A., Ghazali (2022) Electric vehicle drive specification modelling for three wheels scooter configuration. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 85-95., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
M. Haiqal, Hamdan and Mohd Zuhaifi, Zainol and Zubair, Khalil (2022) Simulation of fault detection system of automotive coil spring by using acoustic method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 95-104. ISSN 2636-9575. (Published)
M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
M. Zaini, S. N. A. and M. Saad, S. K. and Jaafar, Nur Najmiyah and Abu, M. Y. (2022) Application of Mahalanobis-Taguchi System in the down-up case of methadone flexi dispensing program. Applied Mathematics and Computational Intelligence, 11 (1). pp. 73-87. ISSN 2289-1315. (Published)
Mas Ayu, Hassan and Zubaidah, Zamri and Rosdi, Daud and Norizah, Redzuan and Izman, Sudin (2022) The Effect of PLA/HA Coating Thickness on Crack Formation and Corrosion Performance. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer, Cham, Cham, pp. 47-53. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)
Md. Nazmus, Sakib (2022) Study on the fabrication and mechanical characterization of graphene-epoxy nanocomposite material. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).
Miza Liyana Taha, Sulaiman and Muhammed Nafis, Osman Zahid (2022) Leveraging six sigma tools to improve student performance in technical courses at secondary school. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 83-89., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Mohamad Razwan, Abdul Malek and Nor Azlina, Ab. Aziz and Alelyani, Salem and Mohana, Mohamed and Farah Nur Arina, Baharudin and Zuwairie, Ibrahim (2022) Comfort and energy consumption optimization in smart homes using bat algorithm with inertia weight. Journal of Building Engineering, 47 (103848). pp. 1-14. ISSN 2352-7102. (Published)
Mohamad Sazuan, Sarifudin (2022) Waste reduction guideline for production line using boolean algebra. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Muhamad Arifpin, Mansor).
Mohamad Shaiful, Abdul Karim and Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Nurhafizah, Abu Talip Yusof and Nor Hazwani, Aziz (2022) Effect of processing parameters on cellulose content extracted from pineapple leaf. Biocatalysis and Agricultural Biotechnology, 42 (102339). pp. 1-12. ISSN 1878-8181. (Published)
Mohd Aiman Syahmi, Kamarul Baharin and Ahmad Shahrizan, Abdul Ghani and Normawaty, Mohammad-Noor and Hasnun Nita, Ismail and Syafiq Qhushairy, Syamsul Amri (2022) Automatic phytoplankton image smoothing through integrated dual image histogram specification and enhanced background removal method. The Imaging Science Journal. pp. 1-23. ISSN 1368-2199 (Printed); 1743-131X. (Published)
Mohd Azri Hizami, Rasid and Muhammad Nor Azril, Zulkafli and Daing Mohamad Nafiz, Daing Idris and Nurul Fatimah, Abdullah (2022) Experimental evaluation of temperature distribution in armature of a brushed dc machine using thermal imaging. In: 2022 International Conference on Electrical Machines, ICEM 2022 , 5-8 September 2022 , Valencia. pp. 1927-1933. (183486). ISBN 978-166541432-6 (Published)
Mohd Fawzi, Zamri and Ahmad Razlan, Yusoff (2022) Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels. Jurnal Tribologi, 34 (MITC202ONE (Part 2)). pp. 1-11. ISSN 2289-7232. (Published)
Mohd Nasir, Akrimi Mathwa and Najib, M. S. and Mohd Daud, Suhaimi and Mohamad, Mujahid and Che Mohd, Che Mohd Aizal (2022) Intelligent classification of stingless bee honey using Enose. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 72-81. ISSN 2637-0883. (Published)
Mohd Noor Hanif, M. R. and Wan Hasrulnizzam, W. H. and Musfirah, A. H. and Muhammad Ashlyzan, R. and Seri Rahayu, K. (2022) Organizing the Internal Manufacturing Complexity Elements in Adaptation of Current Manufacturing Environment: A Fuzzy Approach. Journal of Mechanical Engineering, 19 (2). pp. 169-185. ISSN 1823-5514. (Published)
Mohd Rahimi, Ramli (2022) Kajian kesan diameter dan kepadatan taburan lekuk terhadap pengurangan daya geseran dan kehausan pemukaan keluli aisi 1060. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Shahir, Jamaludin).
Mohd Said, Rahaini and A Aziz, Khairul Azha and Zainal Abidin, Amar Faiz and Mat Jizat, Jessnor Arif and Mohd Khairuddin, Ismail and Widiyanto, Sigit and Abdul Waduth, Mohamed Faisal (2022) A study on the parameter selection of bat algorithm in in optimizing parameters in camera auto calibration problem. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 50-55. ISSN 2637-0883. (Published)
Mohd Zaidi, Sidek and Muhammad Afiq Miqhail, Johari (2022) Study on effectiveness of air-horn device for bird deterrent in paddy cultivation area. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). 90 -94. ISSN 2636-9575. (Published)
Mohd Zamri, Nur Shahida Azzahra and Amiril, S. A.S. (2022) Stress analysis and optimization of quick stop device through finite element analysis using ANSYS. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 82-90. ISSN 2637-0883. (Published)
Muhamad Afiq, Izuan and Nor Imrah, Yusoff (2022) Simulation of heat generation in friction surface cladding (FSC) of multilayer AA2024. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 63-68. ISSN 2636-9575. (Published)
Muhammad Aizuddin Fikry, Ruslan and Radhiyah, Abd Aziz (2022) An investigation of heat treatment effect on the mechanical properties of the aluminium alloy. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 480-483., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
Muhammad Amirul, Abdullah (2022) Classification of skateboarding tricks by synthesizing transfer learning models and machine learning classifiers using different input signal transformations. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Majeed, Anwar P.P).
Muhammad Ar Rahim, Ibrahim (2022) The classification of skateboard trick manoeuvres through the integration of inertial measurement unit (imu) and machine learning. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Anwar P.P., Abdul Majeed).
Muhammad Daniel Haiqal, Mansor and Noor Mazni, Ismail (2022) Compressive strength of the 5cmx5cm coconut empty fruit bunch fiber reinforced cement cubes. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 105-110. ISSN 2636-9575. (Published)
Muhammad Fahmi Izuwan, Samion (2022) Study of plasma spray aluminum conditions under microwave oven driven on coating characteristics. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Redza, Ahmad Mokhtar).
Muhammad Nur Aiman, Shapiee and Muhammad Ar Rahim, Ibrahim and Mohd Azraai, Mohd Razman and Muhammad Amirul, Abdullah and Musa, Rabiu Muazu and Noor Azuan, Abu Osman and P.P. Abdul Majeed, Anwar (2022) The classification of skateboarding tricks by means of the integration of transfer learning models and K-Nearest neighbors. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 439-450., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Muhammad Rafsanjani, Basri and Fahmi, Samsuri (2022) Design and analysis of an early heart attack detection using openCV. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 163.. (Published)
Muhammad Syamim, Mazlan and Mohamad Rusydi, Mohamad Yasin (2022) A comparative review of effect of ultrasonic shot peening on LCF behavior of the alloys. In: IET Conference Proceedings. IET Conference Proceedings , 20 July 2022 , Pekan, Virtual. pp. 105-110., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Muhammad Yusuff Izzuddin, Roslan and Ahmad Redza, Ahmad Mokhtar (2022) Metal coating by TIG arc deposition method. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 111-118. ISSN 2636-9575. (Published)
Munanday, Anbananthan Pillai and Norazlianie, Sazali (2022) Facial recognition for human disposition identification. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 62.. (Published)
Murthy, Puhanes and Nurul Akmal, Che Lah (2022) The optical and structural of the synthesised cu nanostructure using hydrothermal microwave-assisted method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 97.. (Published)
Musa, Rabiu Muazu and Afrouzeh, Mohsen and Suppiah, Pathmanathan K. and Abdul Majeed, Anwar P. P. and Afroozeh, Mohammad Sadegh and Mohamad Razali, Abdullah (2022) The application of modified equipment in retention of motor task performance amongst children of low and high working memory capacity. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 931-939., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Musa, Rabiu Muazu and Afrouzeh, Mohsen and Suppiah, Pathmanathan K. and P.P. Abdul Majeed, Anwar and Afroozeh, Mohammad Sadegh and Abdullah, Mohamad Razali (2022) The application of modified equipment in retention of motor task performance amongst children of low and high working memory capacity. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang. pp. 931-939., 730. ISSN 1876-1100 ISBN 978-981334596-6 (Published)
N
Nadira Hana, Abdul Hamid (2022) Ashviny Murugan, daughter of a lorry driver, receives Royal Education Award Pingat Jaya Cemerlang. UMP News .
Nadira Hana, Abdul Hamid (2022) Ashviny a p Murugan anak pemandu lori Penerima Anugerah Pelajaran Diraja Pingat Jaya Cemerlang. UMP News .
Nafrizuan, Mat Yahya and Nurainaa, Elias and Muhammad Hazim, Mohd Nordin (2022) A comparison of type 1 and type 2 fuzzy logic controller for DC motor system. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 125-133., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Nik Mohd Azrin, Nik Aziz and Daing Mohamad Nafiz, Daing Idris and Saiful Anwar, Che Ghani and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and Muhammad Hanif, Abd. Rasid (2022) Stability analysis of multirotor drone with water jet payload. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 77.. (Published)
Nizam Hafiz, Bandi and Ahmad Nazif, Noor Kamar and Cheng, Jack Kie (2022) Investigating the impact of lean manufacturing practices on operational performance. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 42-47. ISSN 2636-9575. (Published)
Noor Aishah, Kamarudin and Mohamad Razali, Abdullah and Eswaramoorthi, Vijayamurugan and Ahmad Bisyri Husin Musawi, Maliki and Aina Munirah, Ab Rasid and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu (2022) A cluster analysis of identifying team and individual sports athlete based on anthropometric, health and skill related components. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 561-570., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Noor Danish, N. H. D. and Musfirah, Abdul Hadi (2022) Optimization of cutting parameter for machining Ti-6Al-4V titanium alloy. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). 53- 57. ISSN 2636-9575. (Published)
Nor Shuhada, Ibrahim and Nafrizuan, Mat Yahya and Saiful Bahri, Mohamed (2022) Metaheuristic nature-inspired algorithms for reservoir optimization operation: A systematic literature review. Indonesian Journal of Electrical Engineering and Computer Science, 26 (2). pp. 1050-1059. ISSN 2502-4752. (Published)
Norfatihah, Ismail (2022) Study on the mechanical behavior of silica nanoparticle reinforced magnesium bio-nanocomposite. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nafrizuan, Mat Yahya).
Norfazillah, Talib and UNSPECIFIED and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings. 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48. ISSN 2214-7853 (Published)
Norfazillah, Talib and Ainaa Mardhiah, Sabri and Nor Athira, Jamaluddin and Mohamad Hafiz Akmal, Suhimi and Amiril Sahab, Abdul Sani (2022) Effect of Vegetable-Based Nanofluid Enriched with Nanoparticles as Metalworking Fluids During Orthogonal Cutting Process. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore, pp. 90-93. ISBN 978-981-16-9949-8 (Printed); 978-981-16-9949-8(Online)
Norfazillah, Talib and Nur Fatin Amira, Mohd Sukor and Ainaa Mardhiah, Sabri and Haslina, Abdullah and Amiril Sahab, Abdul Sani (2022) Experimental study on physical properties of modified jatropha oilbased nanofluids for machining purposes. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1831-1835., 48 (176050). ISSN 2214-7853 (Published)
Nur Diana Farhana, Zulkiflee and Munira, Mohd Ali (2022) Effects of portable computing device usage on posture and health among university students. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 436-439., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
Nur Elya Haniza, Zamiruddin (2022) Measurement of lubricant oil film thickness under minimum quantity lubrication milling process. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurrina, Rosli).
Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and Abdul Majeed, Anwar P. P. and Mohd Azraai, Mohd Razman and Choong, Chun Sern and Musa, Rabiu Muazu (2022) Forecasting daily travel mode choice of kuantan travellers by means of machine learning models. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 979-987., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Nur Hanisah, Azman and Oktaviandri, Muchamad and Muhammad Rizal, Ramedan (2022) SCADA system for industrial manipulator PLC trainer. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 375-385., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Nur Izzati Khoirunnisa, Ismail (2022) Experimental study of oil film thickness on workpiece under minimum quantity lubrication milling process using laser induced fluorescence method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurrina, Rosli).
Nur Khadijah, Mazlan and Nazrin, Mokhtar and Asmelash, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Nur Khadijah, Mazlan and Nazrin, Mokhtar and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2022) Prediction of abrasive waterjet machining of sheet metals using artificial neural network. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 43-50., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya (2022) System Identification for a Mathematical Model of DC Motor System. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2022) , 25-25 June 2022 , Shah Alam, Selangor, Malaysia. pp. 30-35.. ISBN 978-1-6654-9581-3 (Published)
Nur Naajihah, Ab Rahman and Nafrizuan, Mat Yahya (2022) System identification for a mathematical model of DC motor with PI controller. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 73.. (Published)
Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan and Anis Izzati, Md Yusoff and Hui Xin, Wong (2022) Optimising casting film Parameters for LPDE material assessment. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 67-74.. ISBN 978-981-19-2890-1 (Published)
Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan and Anis Izzati, Md Yusoff and Weng Yee, Yuen (2022) Performance of assessment model for Injection moulding parameters. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials: Selected Articles from iM3F 2021, Malaysia , 20 September 2021 , Virtually hosted by Universiti Malaysia Pahang. pp. 59-65.. ISBN 978-981-19-2890-1 (Published)
Nur Syuhada, Che Amdilah and Lau, Yu Shi and Liew, Yih Miin and Wan Naimah, Wan Ab Naim and Mohd Jamil, Mohamed Mokhtarudin (2022) Computational fluid dynamics of patient-specific coronary artery during stent treatment. In: IET Conference Proceedings. IET Conference Proceedings; 2022 Engineering Technology International Conference, ETIC 2022 , 07 - 08 September 2022 , Pahang, Virtual. 216 -220., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
Nurainaa, Elias and Nafrizuan, Mat Yahya (2022) Fuzzy logic controller optimized by MABSA for DC servo motor on physical experiment. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 561-570., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Baarath, Kunjunni and Abdul Majeed, Anwar P. P. and Ahmad Fakhri, Ab Nasir and Papaioannou, Georgios (2022) Normal forces effects of a two in-wheel electric vehicle towards the human body. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 693-701., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Nurul Akmal, Che Lah and Murthy, Puhanes and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu‑based oxide nanostructures. Scientific Reports, 12 (1). pp. 1-20. ISSN 2045-2322. (Published)
Nurul Akmal, Che Lah and Puhanes, Murthy and Mohd Nashrul, Mohd Zubir (2022) The physical and optical investigations of the tannic acid functionalised Cu-based oxide nanostructures. Scientific Reports, 12 (9909). pp. 1-20. ISSN 2045-2322. (Published)
Nurul Hasya, .Md Kamil and Ahmad Shahir, Jamaludin and Mohd Nizar, Muhd Razali and Abdul Nasir, Abd Ghafar (2022) Temperature and heat flow analysis in a drying chamber through finite element method. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials.Lecture, Lecture Notes in Mechanical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 - 20 September 2021 , Virtual, Online. pp. 309-316.. ISSN 2195-4356 ISBN 978-981192889-5 (In Press / Online First) (In Press / Online First)
Nurul Hasya, .Md Kamil and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Siti Nadiah, Mohd Saffe (2022) Micromilling performance analysis – cold air assisted aluminium machining behaviour observation. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 124-130., 2022 (12). ISBN 978-1-83953-781-3 (Published)
Nurul Hasya, Md. Kamil and Mohd Nizar, Mhd Razali and Ahmad Shahir, Jamaludin and Siti Nadiah, Mohd Saffe and Musfirah, Abdul Hadi (2022) Micromilling performance analysis – cold air assisted aluminium machining behaviour observation. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 124-130., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Nurul Hidayah, Razak and N. F., Husein (2022) The flank wear optimisation of 316 Stainless Steel using response surface method in dry-down milling using carbide insert. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 25-29., 2022 (22). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Nurul Jannah, Baharuddin (2022) Study on die shoulder patterning method (DSPM) onto minimizing springback of u-ending. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Rosli, Abdul Manaf).
Nurul Mubinah, Suhaimi and Zhang, Yixuan and Joseph, Mary and Kim, Miso and Parker, Andrea G. and Griffin, Jacqueline (2022) Investigating older adults’ attitudes towards crisis informatics tools : Opportunities for enhancing community resilience during disasters. In: Conference on Human Factors in Computing Systems - Proceedings; 2022 CHI Conference on Human Factors in Computing Systems, CHI 2022 , 30 April-5 May 2022 , Virtual, Online. pp. 1-16. (258). ISBN 978-145039157-3 (Published)
Nurul Mubinah, Suhaimi and Zhang, Yixuan and Joseph, Mary Amulya and Kim, Miso and Parker, Andrea Grimes and Griffin, Jacqueline A. (2022) Investigating older adults' attitudes towards crisis informatics tools : Opportunities for enhancing community resilience during disasters. In: Conference on Human Factors in Computing Systems - Proceedings. 2022 CHI Conference on Human Factors in Computing Systems, CHI 2022 , 30 April - 5 May 2022 , Virtual, Online. pp. 1-16. (258). ISBN 978-145039157-3 (Published)
Nurul Najaa, Sharizal and Jaapar, Mohd Hamka and Khairul Fikri, Muhammad (2022) Investigation of the effect of print parameter on dimensional accuracy for fused deposition modelling (FDM) 3D printer. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 142-145., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
P
P. N. A. Nasuha, Mohd Nor and Mohd Jamil, Mohamed Mokhtarudin (2022) Modelling the effect of ischemia on myocardial electrophysiology. In: IET Conference Proceedings. IET Conference Proceedings; 2022 Engineering Technology International Conference, ETIC 2022 , 07 - 08 September 2022 , Pahang, Virtual. 498 -503., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
R
Rabiatul Syuhada, Hasan and Muhammed Nafis, Osman Zahid (2022) Implementation of lean tools as waste assessment method in a coil spring manufacturing. In: The 4th International Conference on Engineering and Technology for Sustainable Development (4th ICET4SD 2021) . pp. 1-13.. (Submitted) (Submitted)
Rabiu Muazu, Musa and Isyaku, Hassan and Mohamad Razali, Abdullah and Mohd Nazri, Latiff Azmi and Abdul Majeed, Anwar P. P. and Noor Azuan, Abu Osman (2022) A longitudinal analysis of injury characteristics among elite and amateur tennis players at different tournaments from electronic newspaper reports. Frontiers in Public Health, 10 (835119). pp. 1-14. ISSN 2296-2565. (Published)
Radhiyah, Abd Aziz and Nadira Hana, Abdul Hamid (2022) UMP, TT Vision Technology Sdn. Bhd. Collaborate in Engineering and Technology. UMP News .
Radhiyah, Abd Aziz and Nadira Hana, Abdul Hamid (2022) UMP, TT Vision Technology Sdn. Bhd. jalin kerjasama bidang Kejuruteraan dan Teknologi. UMP News .
Rosdi, Daud and Nurazlina, Sulaeman and Mas Ayu, Hassan and Arman Shah, Abdullah (2022) Prediction of Malaysian Talus Bone Morphology Using Artificial Intelligence. In: Advanced Materials and Engineering Technologies. Advanced Structured Materials book series (STRUCTMAT), 162 . Springer Science and Business Media Deutschland GmbH, Springer Link Malaysia, pp. 29-37. ISBN 978-3-030-92963-3 (Printed); 978-3-030-92964-0(Online)
Rosli, Danial N. and Rasid, Mohd Azri Hizami (2022) Modal analysis of an 8/6 pole switched reluctance motor core with different materials and assembly method using FEA. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 40-47. ISSN 2637-0883. (Published)
S
S., Sulaiman and S., Izman and M. B., Udaya and M. F., Omar (2022) Review on grain size effects on thermal conductivity in ZnO thermoelectric materials. RSC Advances, 12 (9). pp. 5428-5438. ISSN 2046-2069. (Published)
S. F., Iskandar and Mas Ayu, Hassan and Rosdi, Daud and Siti Haryani, Tomadi and A., Shah (2022) Finite element study : Effect of emergency brake on total knee arthroplasty. In: IET Conference Proceedings. 2022 Engineering Technology International Conference, ETIC 2022 , 7 - 8 September 2022 , Kuantan, Virtual. pp. 221-225., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2022) Application of Mahalanobis-Taguchi System in Full Blood Count of Methadone Flexi Dispensing Program. Malaysian Journal of Applied Sciences, 7 (2). pp. 1-23. ISSN 0127-9246. (Published)
S. M. H., Fahami and Faiz, Mohd Turan (2022) Directional Control of Wheel Syncronization in Vehicle Steer by Wire System. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 96-103. ISSN 2637-0883. (Published)
S. N. A. M., Zaini and S. K. M. Saad and M. Y., Abu (2022) Application of Mahalanobis-Taguchi System in Liver Function Profile of Methadone Flexi Dispensing Program. Journal of Applied Science & Process Engineering, 9 (2). pp. 1158-1176. ISSN 2289-7771. (Published)
S.K., Lim and M. F., Zamri and Ahmad Razlan, Yusoff (2022) Structure integrity analysis on nickel–diamond blade in dicing of hard-brittle ceramic die. Procedia CIRP, 108. pp. 465-469. ISSN 2212-8271 (Online). (Published)
Salman, Abdulaziz Abdo Saif and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Muhammad Amirul, Abdullah and Abdul Majeed, Anwar P.P. (2022) The diagnostics of osteoarthritis : A fine-tuned transfer learning approach. In: Lecture Notes in Networks and Systems; 9th International Conference on Robot Intelligence Technology and Applications, RiTA 2021 , 16-17 December 2021 , Daejeon. pp. 455-461., 429 LNNS (276219). ISSN 23673370 ISBN 978-303097671-2 (Published)
Shabudin, Abbas and Maryah Harzarina, Jasni and Mohd Jamil, Mohamed Mokhtarudin (2022) Brain capillary geometry development for multiscale modelling study. In: IET Conference Proceedings. IET Conference Proceedings; 2022 Engineering Technology International Conference, ETIC 2022 , 07 - 08 September 2022 , Pahang, Virtual. 26 -30., 2022 (22). ISSN 2732-4494 ISBN 978-183953782-0 (Published)
Shamsu Anuar, Mohamad Aqil and Mansor, M. A. (2022) Application of value stream mapping in the automotive industry: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 34-41. ISSN 2636-9575. (Published)
Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Nur Fajrina, Mohd Noh and Muhammad, Aisha (2022) Distribution network reconfiguration for transmission loss minimization and voltage profile improvement using salp swarm optimization algorithm. In: Lecture Notes in Electrical Engineering. 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24 - 25 November 2020 , Virtual, Online. pp. 1103-1123., 770. ISSN 1876-1100 ISBN 978-981162405-6 (Published)
Shanono, Ibrahim Haruna and Nor Rul Hasma, Abdullah and Nur Fajrina, Mohd Noh and Muhammad, Aisha (2022) Distribution network reconfiguration for transmission loss minimization and voltage profile Improvement using salp swarm optimization algorithm. In: Lecture Notes in Electrical Engineering; 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020 , 24-25 November 2020 , Virtual, Online. pp. 1103-1123., 770 (266059). ISSN 1876-1100 ISBN 978-981162405-6 (Published)
Siti Khadijah, Mat Saad (2022) Developing a data monitoring system for methadone flexi dispensing (MFLEX) service using mahalanobis-taguchi system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yazid, Abu).
Siti Khadijah, Mat Saad and Sri Nur Areena, Mohd Zaini and Mohd Yazid, Abu (2022) Application of the Mahalanobis-Taguchi System in Renal Profile of the Methadone Flexi Dispensing Program. Jurnal Teknik Industri, 24 (1). pp. 1-12. ISSN 2622-5131 (Online). (In Press / Online First) (In Press / Online First)
Siti Munirah, Muhammad Ali and El-Bouri, Wahbi K. and Mohd Jamil, Mohamed Mokhtarudin (2022) Age-based sensitivity analysis on cardiac hemodynamics using lumped-parameter modelling. In: 7th IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2022 - Proceedings , 7-9 December 2022 , Virtual, Online. pp. 160-164. (187642). ISBN 978-166549469-4 (Published)
Siti Nur Athirah, Ahmad Latfi and Nur Najmiyah, Jaafar (2022) An investigation of travel time pattern of T224 RapidKL bus using AVL data. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (1). pp. 66-72. ISSN 2636-9575. (Published)
Siti Sarah, Taib and Liyana, Tajul and Hasnulhadi, Jaafar and Mohd Sabri, Hussin and Zamzuri, Hamedon (2022) Analysis of multi-thickness plates by successive forging. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 111-114., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
Siti Suhaila, Sabarudin (2022) 2D simulation of assistive grouser mechanism using discrete element method (dem) for traversing on unconsolidated soft sand. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Najmuddin, Ibrahim).
Sri Nur Areena, Mohd Zaini and Mohd Yazid, Abu (2022) Development A New Costing Structure In Product And Service Operation Using Time Driven Activity based Costing. Journal of Technology and Operations Management, 17 (1). pp. 11-26. ISSN 2590-4175 (Online). (Published)
Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2022) Simulated Kalman Filter with modified measurement, substitution mutation and hamming distance calculation for solving traveling salesman problem. In: Enabling Industry 4.0 through Advances in Mechatronics: selected articles from iM3F 2021, Malaysia , 20 September 2021 , Universiti Malaysia Pahang (UMP). pp. 309-320.. ISBN 978-981-19-2095-0 (Published)
Suraya, Sulaiman and Izman, Sudin and Al-Naib, Uday M. Basheer and Muhammad Firdaus, Omar (2022) Review of the Nanostructuring and Doping Strategies for High-Performance ZnO Thermoelectric Materials. Crystals, 12 (8). pp. 1-16. ISSN 2073-4352. (Published)
Suraya, Sulaiman and Nur Syazwa, Zamri and Radhiyah, Abd Aziz and Mohamad Farid, Mohamad Sharif and Natasha, Ahmad Nawawi and Nur Ayuni, Jamal (2022) Effects of Solvents on ZnO Nanoparticles Synthesis via Sol–gel Method. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 1-9.. ISSN 978-981-19-1457-7 (Published)
Syarifah Nur Hasanah, Syed Kamarudin and Lee, Helen May Shian and Mohd Zairulnizam, Mohd Zawawi (2022) Direct formation of periodic parallel microgrooves on glass using CO2 laser irradiation. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2022) , 20 July 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 1-4.. ISBN 978-1-83953-781-3 (Published)
Syed, Qutaba and Azmir, Azhari and Gebremariam, Mebrahitom Asmelash and Yadav, Aman and Lusi, Nuraini (2022) Development of fiber metal laminate composite with different glass fiber gsm. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022) , 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-8.. ISSN 2214-7853 (In Press / Online First) (In Press / Online First)
Syh Kai, Lim and Wan Hamzah, Azmi and Ahmad Shahir, Jamaludin and Ahmad Razlan, Yusoff (2022) Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application. Lubricants, 10 (350). pp. 1-19. ISSN 2075-4442 (Online). (Published)
T
Tahar, M. S. M. and Rosli, Nurrina (2022) Simulation study of cooling system for photovoltaic panel using ansys. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 26-33. ISSN 2636-9575. (Published)
Tang, Jin Cheng and Ab. Nasir, Ahmad Fakhri and Mohd Razman, Mohd Azraai and P. P. Abdul Majeed, Anwar and Thai, Li Lim (2022) Vision-based human detection by fine-tuned SSD models. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (11). pp. 386-390. ISSN 2156-5570(Online). (Published)
Tang, Jin Cheng and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Thai, Li Lim (2022) Vision-based Human Presence Detection by Means of Transfer Learning Approach. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering, 900 . Springer, Singapore, Singapore, pp. 571-580. ISBN 978-981-19-2094-3 (Printed); 978-981-19-2095-0 (Online)
Tang, Jin Cheng and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Thai, Li Lim and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin (2022) Fine-tuned RetinaNet models for Vision-based Human Presence Detection. Journal of Mechatronics and Intelligent Manufacturing (Mekatronika), 4 (2). pp. 16-23. ISSN 2637-0883 (Online). (Published)
Teo, Jia Chern and Mohd Khairuddin, Ismail and Mohd Razman, Mohd Azraai and Anwar, P. P. Abdul Majeed and Mohd Isa, Wan Hasbullah (2022) Automated detection of knee cartilage region in X-ray image. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 104-109. ISSN 2637-0883. (Published)
Thor, Wei Soon and M. Nafis, O. Z. (2022) Investigation of accuracy and response time in GPS-based car mileage monitoring device. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 42-49. ISSN 2637-0883. (Published)
U
Ungku Shamir, Hamzah and Muhammed Nafis, Osman Zahid (2022) A preliminary study on Industry 4.0 as a platform for University-Industry Collaboration. In: IET Conference Proceedings. 3rd Innovative Manufacturing, Mechatronics and Materials Forum 2022, iM3F 2022 , 20 July 2022 , Pekan, Virtual. pp. 6-11., 2022 (12). ISSN 2732-4494 ISBN 978-183953704-2, 978-183953705-9, 978-183953718-9, 978-183953719-6, 978-183953742-4, 978-183953761-5, 978-183953776-9, 978-183953781-3, 978-183953788-2, 978-183953789-9, 978-183953799-8, 978-183953806-3 (Published)
V
Vinayak, Akhil and Muhammad Aizzat, Zakaria and Baarath, K. (2022) A bezier curve optimization method based on segmentation factor (t) for path planning in autonomous navigation. In: AIP Conference Proceedings. AIP Conference Proceedings; The 5th International Conference on Automotive Innovation & Green Energy Vehicle (AiGEV 2022) , 5 - 6 December 2022 , Langkawi, Kedah. pp. 1-11., 2998 (050002). ISSN 0094-243X (Published)
W
Wahaizad, Safiei (2022) Deligasi FTKPM ke Seminar Antarabangsa iMEC APCOMS 2022 di Surakarta, Indonesia. FTKPM News .
Wan Nurul Syahirah, Wan Lanang (2022) Assessing the influence of attitudinal function on sustainability awareness in manufacturing industry. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Faiz, Mohd Turan).
Wan Ruslan, Wan Yusoff and Ismayuzri, Ishak and Fadhlur Rahman, Mohd Romlay (2022) Cubic spline interpolations in CNC machining. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 253-261., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Y
Yee, Lee Yin and Muhammad Aizzat, Zakaria (2022) Universiti Malaysia Pahang autonomous shuttle development : Lane classification analysis using Convolutional Neural Network (CNN). In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 61-70.. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Yee, Lee Yin and Muhammad Aizzat, Zakaria (2022) Universiti malaysia pahang autonomous shuttle Development : Lane classification analysis using convolutional neural network (CNN). In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. 61- 70., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Yip, Zi Ying and Mohd Khairuddin, Ismail and Mohd Isa, Wan Hasbullah and Abdul Majeed, Anwar P. P. and Abdullah, Muhammad Amirul and Mohd Razman, Mohd Azraai (2022) Badminton smashing recognition through video performance by using deep learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 70-79. ISSN 2637-0883. (Published)
Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Mustapah, M. M. and Nelfiyanti, . (2022) The effect of the supply chain in the quick response manufacturing (QRM) environment in the automotive industry. Procedia Computer Science, 207. pp. 2116-2124. ISSN 1877-0509. (Published)
Z
Zainudin, Muhammad Faiz and Ahmad Shahir, Jamaludin and Mohamad Rusydi, Mohamad Yasin (2022) Effect of the current and pressure on weld strength for IBS rebar machine. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 1-6. ISSN 2636-9575. (Published)
Zamzuri, Hamedon and Ammar Zakwan, Abdullah and Ismayuzri, Ishak and Muhammad Hasnulhadi, Mohammad Jaafar (2022) Non-vibrate palm oil tree harvesting cutter using DC motor. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Gambang, Kuantan. pp. 529-535., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6 (Published)
Zuhaira, Abdullah and Mohamad Heerwan, Peeie and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak (2022) Investigation of the combination of kinematic path planning and artificial potential field path planning with pi controller for Autonomous Emergency Braking Pedestrian (AEB-P) system. In: Lecture Notes in Electrical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 285-297., 900. ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Zuhaira, Abdullah and Mohamad Heerwan, Peeie and Muhammad Aizzat, Zakaria and Muhammad Izhar, Ishak (2022) Investigation of the combination of kinematic path planning and artificial potential field path planning with PI controller for autonomous emergency braking pedestrian (AEB-P) System. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Gambang. pp. 285-297., 900 (277979). ISSN 1876-1100 ISBN 978-981192094-3 (Published)
Zuhairah, Zulkfli and M. Faris, Zaidi and Fatchurrohman, Nanang and Zamzuri, Hamedon (2022) Investigation on the Effect of Machining Parameters on Mechanical Properties of Friction Stir Processed Mg–Al-Micro Al2O3 Metal Matrix Composites. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials. Lecture Notes in Mechanical Engineering . Springer Nature Singapore, Singapore, pp. 589-598. ISBN 978-981-19-2889-5 (Printed); 978-981-19-2890-1(Online)
Zulkefle, Mohamad Hafizie and Abdul Ghani, A. S. (2022) Investigation of rectangular shape object detection and classification using python. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 32-39. ISSN 2637-0883. (Published)
Zulkifli, Aidisyahrul Hanif and Mohd Khairuddin, Ismail and Anwar, P. P. Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Virtual driving simulation for pedal error study. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 24-31. ISSN 2637-0883. (Published)