UMP Institutional Repository

Items where Author is "K., Kadirgama"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 222.

Article

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Kettner, Maurice and K., Kadirgama and A. M., Leman and A. I.M., Shaiful (2018) Effects of fusel oil water content reduction on fuel properties, performance and emissions of SI engine fueled with gasoline -fusel oil blends. Renewable Energy, 118. pp. 858-869. ISSN 0960-1481

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online)

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321

W. S., Wan Harun and Asri, R.I.M. and Juliawati, Alias and Farah Hanani, Zulkifli and K., Kadirgama and S. A., Che Ghani and Jun Haslinda, Haji Shariffuddin (2018) A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials. Ceramics International, 44 (2). pp. 1250-1268. ISSN 0272-8842

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and K., Kadirgama and Mohamad Shahrizan, Moslan and Faten Ermala, Che Othman and Nor Hafiza, Ismail and Samykano, Mahendran and Zawati, Harun (2018) Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 378-381. ISSN 2289-5981 (Print); 2289-599x (Online)

Sofiah, A. G. N. and Mahendran, Samykano and K., Kadirgama and Mohan, R. V. and Nurul Akmal, Che Lah (2018) Metallic nanowires: Mechanical properties - Theory and experiment. Applied Materials Today, 11. pp. 320-337. ISSN 23529407

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311

N., Sazali and W. N., W. Salleh and K., Kadirgama (2018) P84 Co-polyimide/Nanocrystalline Cellulose (NCC)-based tubular carbon membrane: effect of drying times for carbon dioxide separation at elevated carbonization temperature. Journal of Applied Membrane Science & Technology, 22 (1). pp. 49-54. ISSN 2600-9226

Hussein, Adnan M. and Lingenthiran, Samylingam and K., Kadirgama and M. M., Noor and Aik, L. K. (2018) Palm oil based nanofluids for enhancing heat transfer and rheological properties. Heat and Mass Transfer, 54 (10). pp. 3163-3169. ISSN 0947-7411 (Print); 1432-1181 (Online)

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310

Aminullah, A. R. M. and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Nurul Nadia, Mohd Zawawi and K., Kadirgama and M. N. S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) Compressor by using Al2O3/PAG Nanolubricant. Journal of Mechanical Engineering, SI 5 (1). pp. 49-61. ISSN 1823-5514

Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online)

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online)

Ramachandran, Kaaliarasan and K., Kadirgama and D., Ramasamy and Hussein, A.M. and Azmi, W. H. and Tarlochan, F. and Kadirgama, G. (2017) Thermophysical Properties Measurement of Nano Cellulose in Ethylene Glycol/Water. Applied Thermal Engineering, 123. pp. 1158-1165.

K., Kadirgama and D., Ramasamy and Kong, Chung Hwa (2017) Assessment of Alternative Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3591-3605. ISSN 1678-5878 (Print); 1806-3691 (Online)

N. H., Razak and M. M., Rahman and K., Kadirgama (2017) Cutting Force And Chip Formation In End Milling Operation When Machining Nickel-Based Superalloy, Hastelloy C-2000. Journal of Mechanical Engineering and Sciences (JMES) , 11 (1). pp. 2539-2551. ISSN 2289-4659 (print); 2231-8380 (online)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque and M. M., Noor (2017) Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online)

M. M., Noor and K., Kadirgama and A. M., Hussein (2017) Nanoparticles Suspended in Ethylene Glycol Thermal Properties and Applications: An Overview. Renewable and Sustainable Energy Reviews, 69. pp. 1324-1330. ISSN 1364-0321

Adnan M., Husein and Dawood, H. K. and R. A., Bakar and K., Kadirgama (2017) Numerical Study on Turbulent Forced Convective Heat Transfer Using Nanofluids TiO2 in an Automotive Cooling System. Case Studies in Thermal Engineering, 9. pp. 72-78. ISSN 2214-157X

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370. pp. 19-28. ISSN 1662-9507

N. S. M., Noor and Z., Ghazalli and M. R. M., Rejab and F. A., Fauzi and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2017) A Comparison of Muscular Activity among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method. Advanced Science Letters, 23 (11). pp. 11471-11474. ISSN 1936-6612

Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and Murillo, J. Rivas and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2017) Effect of the length on the tensile deformation of nickel nanowires studied using molecular dynamic simulations. Advanced Science Letters, 23 (11). pp. 11549-11552. ISSN 1936-6612

D., Ramasamy and C.Y., Goh and K., Kadirgama and F., Benedict and M. M., Noor and G., Najafi and A., P.Carlucci (2017) Engine Performance, Exhaust Emission And Combustion Analysis Of A 4-Stroke Spark Ignited Engine Using Dual Fuel Injection. Fuel, 207. pp. 719-728. ISSN 0016-2361

Sahid, N. S. M. and M. M., Rahman and K., Kadirgama and D., Ramasamy and Maleque, M. A. and M. M., Noor (2017) Experimental Investigation on the Performance of the TiO2 and ZnO Hybrid Nanocoolant in Ethylene Glycol Mixture towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2017) Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3087-3094. ISSN 2289-4659 (print); 2231-8380 (online)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and N. S. M., Noor and Zahari, Taha and Zulkifli, Ahmad and K., Kadirgama and Nasrul Hadi, Johari and N. H., Mohamed (2017) A Finite Element Analysis of a Recurve Bow Riser using Carbon Fibre Hybrid Composites. Advanced Science Letters, 23 (11). pp. 11467-11470. ISSN 1936-6612

D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online)

K., Ramachandran and K., Kadirgama and D., Ramasamy and Azmi, W. H. and F. , Tarlochan (2017) Investigation on effective thermal conductivity and relative viscosity of cellulose nanocrystal as a nanofluidic thermal transport through a combined experimental – Statistical approach by using Response Surface Methodology. Applied Thermal Engineering, 122. pp. 473-483. ISSN 1359-4311

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Obed M., Ali and K., Kadirgama and A. M., Leman (2017) Performance and Combustion Characteristics of an SI Engine Fueled With Fusel Oil-Gasoline at Different Water Content. Applied Thermal Engineering, 123. pp. 1374-1385. ISSN 1359-4311

Awad, Omar I. and R., Mamat and Ali, Obed M. and Azmi, W. H. and K., Kadirgama and I. M., Yusri and A. M., Leman and Yusaf, T. (2017) Response Surface Methodology (RSM) Based Multi-Objective Optimization of Fusel Oil-Gasoline Blends at Different Water Content in SI Engine. Energy Conversion and Management, 150. pp. 222-241. ISSN 0196-8904

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and Amirruddin, Abdul Kadir and G., Najafi and M. M., Rahman (2017) Waste Cooking Oil Blended With The Engine Oil For Reduction of Friction and Wear On Piston Skirt. Fuel, 205. pp. 247-261. ISSN 0016-2361

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online)

M., Hussein Adnan and R. A., Bakar and K., Kadirgama and K. V., Sharma (2016) Heat Transfer Enhancement with Elliptical Tube Under Turbulent Flow Tio2-Water Nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 2334-7163

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online)

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371.

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and K. V., Sharma (2016) Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant. The International Journal of Advanced Manufacturing Technology, 82 (1). pp. 327-340. ISSN 0268-3768 (Print), 1433-3015 (Online) (In Press)

N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2015) An Experimental Investigation on Surface Finish in Die-Sinking EDM Of Ti-5Al-2.5Sn. The International Journal of Advanced Manufacturing Technology, 77 (9). pp. 1727-1740. ISSN 0268-3768

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online)

Sivarao, S. and M. J., Raguvaran and A. S., Dahlan and K., Kadirgama and M. A., Amran (2015) Air Permeability Investigation Towards Automotive Tyre Pressure Sustainability and Life Saving. ARPN Journal of Engineering and Applied Sciences, 10 (10). pp. 4404-4412. ISSN 1819-6608

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online)

Haris, Hassanal and Jahir Hussain, Fathima Shahitha and K., Kadirgama and M. M., Yusoff (2015) Crystallization, Characterization, & Application of Hydroxyl Apatite on Hydroxyl Ethyl Cellulose in the Present of Stimulated Body Fluid Solution (SBF). Australian Journal of Basic and Applied Sciences, 9 (37). pp. 185-190. ISSN 19918178

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online)

Appalasuwami, Sasikala and Jahir Hussain, Fathima Shahitha and K., Kadirgama and Lakshmi, Prema and M. M., Yusoff (2015) Hydroxyethyl Cellulose Stabilized Copper Nanoparticles and its Antibacterial Activity. Journal of Applied Sciences Research, 11 (24). pp. 67-73. ISSN 819-544X (print); 816-157X (online)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online)

Zulkifli, Ahmad@Manap and Mohd Aminuddin, Pi Remli and Mohd Haziq, Nordin and Nasrul Hadi, Johari and Z., Ghazalli and K., Kadirgama (2015) The Performance of Kicking by Different Boots Material. Journal of Human Sport and Exercise, 10 (Proc 2). pp. 657-665. ISSN 1988-5202

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online)

Tanti, Ali and Norfadzilah, Jusoh and R. A., Bakar and Teoh, S. J. and K., Kadirgama (2015) Thermal Effect of Thermal Energy Storage (TES) Tank for Solar Energy Application During Charging Cycle Based on the Grid Sensitivity Analysis. Energy Procedia, 79. pp. 245-251. ISSN 1876-6102

D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482

M. M., Rahman and K., Kadirgama and Azma Salwani, Ab Aziz (2014) Artificial neural network modeling of grinding of ductile cast iron using water based sio2 nanocoolant. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1649-1661. ISSN 1985-9325(Print); 2180-1606 (Online)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1782-1792. ISSN 1985-9325(Print); 2180-1606 (Online)

M., Puvanesan and M. M., Rahman and Najiha, M. S. and K., Kadirgama (2014) Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1538-1549. ISSN 1985-9325(Print); 2180-1606 (Online)

N. H., Razak and M. M., Rahman and K., Kadirgama (2014) Experimental Study on Surface Integrity in End Milling of Hastelloy C-2000 Superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online)

Zulkifli, Ahmad and Zahari, Taha and Mohd Hasnun Ariff, Hassan and Mohd Azrul, Hisham and Nasrul Hadi, Johari and K., Kadirgama (2014) Biomechanics Measurements in Archery. Journal of Mechanical Engineering and Sciences (JMES) , 6. pp. 762-771. ISSN 2289-4659 (print); 2231-8380 (online)

K., Kadirgama and A. K., Amiruddin and R. A., Bakar (2014) Estimation Of Solar Radiation By Artificial Networks: East Coast Malaysia. Energy Procedia, 52. pp. 383-388. ISSN 1876-6102

M., Adnan Hussein and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2014) Heat Transfer Augmentation of a Car Radiator using Nanofluids. Heat and Mass Transfer, 50 (11). pp. 1553-1561. ISSN 0947-7411(Print); 1432-1181(Online)

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) Heat Transfer Enhancement Using Nanofluids in an Automotive Cooling System. International Communications in Heat and Mass Transfer, 53. pp. 195-202. ISSN 0735-1933

K., Kadirgama and M., Yogeswaran and S., Thiruchelvam and M. M., Rahman (2014) Mathematical Modeling for Surface Roughness When Milling Aisi 304 Stainless Steel. Jokull Journal, 65 (4). pp. 1-9. ISSN 0449-0576

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Neural Network Modeling and Analysis for Surface Characteristics in Electrical Discharge Machining. Procedia Engineering, 90. pp. 631-636. ISSN 1877-7058

M. M., Rahman and K., Kadirgama (2014) Performance of Water-Based Zinc Oxide Nanoparticle Coolant during Abrasive Grinding of Ductile Cast Iron. Journal of Nanoparticles, 2014. pp. 1-7.

K., Kadirgama and M., Yogeswaran and S. , Thiruchelvam and M. M., Rahman (2014) Prediction of Grinding Machinability when Grind P20 Tool Steel Using Water Based Zno Nano-Coolant. Jokull Journal, 66 (5). pp. 1-15. ISSN 0449-0576

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2014) A Review of Forced Convection Heat Transfer Enhancement and Hydrodynamic Characteristics of a Nanofluid. Renewable and Sustainable Energy Reviews, 29. pp. 734-743. ISSN 1364-0321

K., Kadirgama and R. A., Bakar and Hussein, Adnan M. (2014) Study of Forced Convection Nanofluid Heat Transfer in the Automotive Cooling System. Case Studies in Thermal Engineering, 2. pp. 50-61. ISSN 2214-157X

M. Hussein, Adnan and R. A., Bakar and K., Kadirgama and Sharma, K. V. (2013) Simulation Study of Turbulent Convective Heat Transfer Enhancement in Heated Tube Flow Using Tio2-Water Nanofluid. IOP Conference Series: Materials Science and Engineering, 50 (1). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2013) Artificial Intelligent Approach for Machining Titanium Alloy in a Nonconventional Process. International Journal of Mathematical, Computational, Physical and Quantum Engineering, 7 (11). pp. 1122-1127.

K., Kadirgama and Zahari, Taha and Abdul Rahim, Ismail and Azrul, Hisham and A., Zulkifli and Nasrul Hadi, Johari and Zulfika, Anuar (2013) Effect Of Knee Pad On Kicking A Ball And Gait Analysis. Movement, Health & Exercise, 2. pp. 41-46.

K., Kadirgama and Adnan, M. Husein and Sharma, Korada Viswanatha and R. A., Bakar (2013) The Effect of Cross Sectional Area of Tube on Friction Factor and Heat Transfer Nanofluid Turbulent Flow. International Communications in Heat and Mass Transfer, 47. pp. 49-55. ISSN 0735-1933

K., Kadirgama and Hussein, Adnan M. and R. A., Bakar and Sharma, Korada Viswanatha (2013) The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube. Journal of Nanomaterials, 2013. pp. 1-12. ISSN 1687-4110 (print); 1687-4129 (online)

N. H., Razak and M. M., Rahman and K., Kadirgama (2013) Experiment Study on Surface Integrity in End Milling of Hastelloy C-2000 Superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online)

Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online)

Adnan Mohammed, Hussein and K. V., Sharma and R. A., Bakar and K., Kadirgama (2013) Heat Transfer Enhancement With Nanofluids – A Review. Journal of Mechanical Engineering and Sciences (JMES) , 4. pp. 452-461. ISSN 2289-4659 (print); 2231-8380 (online)

Ahmad Rasdan, Ismail and Shashi Kumar, S A Karagaratnan and K., Kadirgama (2013) Thermal Comfort Findings: Scenario At Malaysian Automotive Industry. Thermal Science, 17 (2). pp. 387-396.

Mohd Azrul Hisham, Mohd Adib and K., Kadirgama and N.H, Mohd Hasni and K., Osman and O., Maskon (2012) Prediction of Blood Flow Velocity and Leaflet Deformation Via 2D Mitral Valve Model. Journal of Mechanical Engineering and Sciences (JMES) , 2, Jun. pp. 217-225. ISSN 2231-8380

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248

K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online)

K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248

M. M., Noor and K., Kadirgama and M. M., Rahman (2011) Particle Swarm Optimisation Prediction Model for Surface Roughness. International Journal of Physical Sciences, 6 (13). pp. 3082-3090. ISSN 1992-1950

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academy of Science, Engineering and Technology, 74. ISSN 2010-3778

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26. pp. 956-961. ISSN 1022-6680

M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online)

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1. pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15. pp. 1909-1914. ISSN 1022-6680

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2. pp. 419-426. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2. pp. 402-408. ISSN 1022-6680

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15. pp. 1595-1602. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26. pp. 949-955. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26. pp. 1557-1562. ISSN 1022-6680

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online)

M. H. M., Haniff and Ahmad Rasdan, Ismail and B. M., Deros and M. N. A., Rahman and K., Kadirgama (2011) The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 3. pp. 306-317. ISSN 1985-9325(Print); 2180-1606 (Online)

K., Kadirgama and M. M., Noor and K. V., Sharma (2011) Tool Life and Wear Mechanism when Machining Hastelloy C-22HS. Wear, 270 (3-4). pp. 258-268. ISSN 0043-1648

K., Kadirgama and M. M., Noor and B., Mohammad and H. H., Habeeb (2010) Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS. Advanced Materials Research, 83-86 . pp. 295-302. ISSN 1022-6680

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2).

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3).

K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482.

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478.

K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509

M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248

M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab and S. A., Kesulai (2009) Fatigue Life Prediction of Lower Suspension Arm Using Strain-Life Approach. European Journal of Scientific Research, 30 (3). pp. 437-450. ISSN 1450-216X

K., Kadirgama and M. M., Noor and M. M., Rahman and W. S., Wan Harun (2009) Finite Element Analysis and Statistical Method to Determine Temperature Distribution on Cutting Tool in End-Milling. European Journal of Scientific Research, 30 (3). pp. 451-463. ISSN 1450-216X

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Fourth Order Torque Prediction Model in End Milling. Journal of Applied Sciences, 9 (13). pp. 2431-2437. ISSN 1812-5654

M. M., Rahman and M. R. M., Rejab and K., Kadirgama and M. M., Noor and A. K., Ariffin (2009) Multiaxial Fatigue Behavior of Cylinder Head for a Free Piston Linier Engine. Journal of Applied Sciences , 9 (15). ISSN 1812-5654

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and K. F., Muhamad (2009) Prediction Modelling of Surface Roughness for Laser Beam Cutting on Acrylic Sheets. Advanced Materials Research. ISSN 1022-6680

M. M., Noor and K., Kadirgama and Aidy, Ali and M. M., Rahman and Z., Ghazalli (2009) Prediction of End-of-Life Strategies for Household Equipments Using Artificial Intelligent. American Journal of Applied Sciences, 6 (10). pp. 1838-1844. ISSN 1546-9239 (print); 1554-3641 (online)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2009) Surface Roughness Prediction Model of 6061-T6 Aluminium Alloy Machining Using Statistical Method. European Journal of Scientific Research, 25 (2). pp. 250-256. ISSN ISSN 1450-216X

K., Kadirgama and M. M., Noor (2008) Cutting Force prediction model by FEA and RSM when machining Hastelloy C-2HS with 900 holder. Journal of Scientific & Industrial Research, 6 (67). pp. 421-427. ISSN 0022-4456

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and R., Daud (2008) Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network. Jourdan Journal of Mechanical and Industrial Engineering, 2 (4). ISSN 1995-6665

K., Kadirgama (2008) Prediction of Torque in Milling by Response Surface Method and Neural Network. International Journal of Modelling and Simulation, 28 (4).

K., Kadirgama and M. M., Noor (2008) Prediction of Tool Life by Statistic Method in End-milling Operation. Scientific Research and Essay , 3 (5). pp. 180-186. ISSN 1992-2248

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and R. A., Bakar and Abdullah, Ibrahim (2000) Education Reform Model at Faculty of Mechanical Engineering, Universiti Malaysia Pahang. International Journal of Recent Trends in Engineering, 1 (5).

D., Ramasamy and K., Kadirgama and M. M., Noor Computational Analysis Of Dissimilar Valve Lift (DVL) Swirl On A Bi-Fuel Compressed Natural Gas (CNG) Engine. 9th International Conference on Advanced Computational Engineering and Experimenting.

Book Section

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

Farah Ayuni, Fauzi and Zahari, Taha and Zakri, Ghazali and Siregar, J. P. and Zulkifli, Ahmad@Manap and K., Kadirgama and Nasrul Hadi, Johari and Danial, Mohamed (2017) Analysis of an Olympic Scale of a Recurve Bow Riser on the Basis of Malaysian Under 15 and Under 17 Archers. In: Advances in Human Factors in Sports and Outdoor Recreation. Advances in Intelligent Systems and Computing, 496 . Springer International Publishing, Switzerland, pp. 131-140. ISBN 978-3-319-41952-7

Adnun , M. Hussein and K., Kadirgama and D., Rarnasarny and R. A., Bakar (2017) Heat Transfer Enhancement with Nanofluids for Automotive Cooling. In: Engineering Applications of Nanotechnology: From Energy to Drug Delivery (Topics in Mining, Metallurgy and Materials Engineering). Springer, pp. 71-100. ISBN 978-3-319-29759-0

K., Kadirgama (2017) Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel. In: Engineering and Innovative Materials V. Trans Tech Publications Ltd, pp. 152-158. ISBN 9783038357704

Bulletin

D., Ramasamy and K., Kadirgama and M. M., Rahman and M. M., Noor (2016) Wood Based Cellulose Nano Particles for Automotive Radiator. Auto INEXSS Issue 11:2016, 11 . pp. 25-26.

Conference or Workshop Item

M. F., Fariz and C. K., Ihsan and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. T., Hoang (2018) Performance and emission characteristic of compression ignition engine using blend of diesel and canola oil. In: The 7th International Conference On Design And Concurrent Engineering 2018 (IDECON 2018), 17-18 September 2018 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) 3D Printing: Overview of PLA Progress. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018), 25 - 26 Julai 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10.. (Unpublished)

D., Ramasamy and K., Kadirgama and Neshabran, Ramachandran and W. H., Azmi (2018) Analysis of dynamic viscosity via experiment and empirical correlation through response surface methodology (rsm) for cellulose nanocrystal (cnc) dispersed in ethylene glycol- water mixture. In: 26th Annual international conference on composites or nano engineering, 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

K., Kadirgama and Kaaliarasan, Ramachandran and D., Ramasamy and W. H., Azmi and Mahendran, Samykano (2018) Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid. In: 26th Annual international conference on composites or nano engineering, 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and Kanagaraj, G. (2018) 3D Printing: Overview of ABS Evolvement. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018), 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10.. (Submitted)

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia, 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Sivaraos, . and A. Z., Khalim and M. S., Salleh and D., Sivakumar and K., Kadirgama (2018) Mamdani-Fuzzy Modeling Approach for Quality Prediction of Non-Linear Laser Lathing Process. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017), 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (012067). ISSN 1757-899X

Kananathan, Jeeven and Samykano, Mahendran and Sudhakar, K. and Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and Manoj Kumar, Nallapaneni and W. K., Ngui and K., Kadirgama and Azmi, W. H. and W. S., Wan Harun (2018) Nanofluid as coolant for grinding process: An overview. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018), 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-16., 342 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) Preliminary Investigations of Acrylonitrile Butadiene Styrene (ABS) Properties. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018), 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Submitted)

Nurhanis Sofiah, Abd Ghafar and Kananathan, J. and Samykano, Mahendran and Ulakanathan, S. and S. A., Che Ghani and W. S., Wan Harun and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Electrochemical Deposited Nickel Nanowires: Influence of Deposition Bath Temperature on the Morphology and Physical Properties. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012032). ISSN 1757-899X

J., Kananathan and Sofiah, A. G. N. and Mahendran, Samykano and S., Ulakanathan and Nurul Akmal, Che Lah and W. S., Wan Harun and K., Sudhakar and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of Boric Acid (H3BO3) Concentration on the Physical Properties of Electrochemical Deposited Nickel (Ni) Nanowires. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 257 (012033). ISSN 1757-899X

Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Wan Sharuzi, Wan Harun and Kananathan, J. and Samykano, Mahendran and Nurul Akmal, Che Lah and Sudhakar, K. and K., Kadirgama and W. K., Ngui and Siregar, J. P. (2017) Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1-2 August 2017 , Swiss Garden Hotel and SpaKuantan, Pahang; Malaysia. pp. 1-7., 257 (1). ISSN 17578981

D., Ramasamy and Kaaliarasan, Ramachandran and K., Kadirgama and Mahendran, Samykano and W. H., Azmi and M. M., Noor and M. M., Rahman (2017) Investigation of Dynamic Viscosity Through Experiment and Correlation Determination through Response Surface Methodology for Cellulose Nanocrystal (Cnc) Dispersed in Ethylene Glycol-Water Mixture. In: 25th International Conference on Composites/Nano-Engineering (ICCE-25), 15-23 May 2017 , Rome, Italy. pp. 1-3.. (Unpublished)

Kong, Chung Hwa and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman and Samykano, Mahendran (2017) Methods of Preparing Internal Combustion Engine Cylinder Bore Surfaces for Frictional Improvement. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01055 ). ISSN 2261-236X

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90.

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016, 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015), 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016, 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016), 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Mahendran, Samykano and Lee, Giok Chui and Shahrani, Anuar and R. A., Bakar and K., Kadirgama and Amir, Abdul Razak and Sharma, K. V. (2013) Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia. In: International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang, Malaysia. pp. 1-14.. (Unpublished)

Zulkifli, Ahmad@Manap and K., Kadirgama (2013) Optimization of The Surface Crack on The Human Lumbar Vertebra. In: The 9th International Conference on Fracture and Strength of Solids 2013, 9-13 June 2014 , Jeju, Korea. pp. 1-8.. (Unpublished)

M. M., Noor and K., Kadirgama and A. K., Amiruddin and K. V., Sharma (2011) The Potential of Wind and Solar Energy in Malaysia East Coast: Preliminary Study at Universiti Malaysia Pahang (UMP). In: Energy and Sustainability 2011, 11 - 13 April 2011 , Alicante, Spain. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman (2010) Analysis of Auto Car Jack. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 MAY 2010 , Universiti Malaysia Pahang. .

M. M., Rahman and K., Kadirgama and M. M., Noor (2010) Artificial Intelligence Techniques for Machining Performance: a Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Noor and K., Kadirgama and E. H., Jamaluddin and M. M., Rahman (2009) Method of Predicting, Estimating and Improving Mean Time between Failures in Reducing Reactive Work in Maintenance Organization. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009, 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1176-1186., 8. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and R. A., Bakar (2009) Artificial Intelligent Model to Predict Surface Roughness in Laser Machining. In: International Conference on Recent Advances in Materials, Minerals & Environment (RAMM’09), , 1-3 June 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

K., Kadirgama and M. M., Noor and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Development of Genetic Algorithms and Multilayer Perceptron Neural Network (Mpnn) Model To Study The Student Performance InThermodynamics. In: International Engineering Education Conference, 16-18 May 2009 , Madinah, Kingdom of Saudi Arabia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and R. A., Bakar and T. T., Mon (2009) Development of Statistical Model to Predict Ra and Rz in the Laser Cutting. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09, 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. M., Noor and T. T., Mon and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab (2009) Drilling on Fibre-Glass Composite using CO2 Laser. In: International Conference on Advance Mechanical Engineering (ICAME’09) , 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. R. M., Rejab and M. M., Noor and R., Daud and K., Kadirgama and M. S. M., Sani (2009) Effect of Adverse Environment on Buckling of Composite Laminates. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and T. T., Mon (2009) The Effect of End Milling Parameters on Surface Roughness when Machining Corrosion Resistance Alloy. In: International Conference on Advance Mechanical Engineering (ICAME’09), 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. Y., Taib (2009) The Effect of Entry Qualifications and Gender Towards Student Performance. In: International Engineering Education Conference, 16-19 May , Madinah, Kingdom of Saudi Arabia. . (Unpublished)

K., Kadirgama (2009) Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material. In: International Conference on Recent Advances in Materials, Minerals & Environment, 1 hingga 3 Jun 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .

K., Kadirgama and M. M., Noor and M. S. M., Sani and R. A., Bakar and A., Ibrahim (2009) The Effect of the Foundation Subject to the Final Year Subject. In: International Journal Conference in Recent Trends in Mechanical Engineering (IJCRTME09), 24-26 Apr 2009 , Trivandrum, Kerala, India.. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani and M. Y., Taib (2009) The Entry Qualifications and Gender Analysis of Student Performance by using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Exit Surveys Assessment of Bachelor Mechanical Engineering Programs at Universiti Malaysia Pahang. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. S. M., Sani and M. M., Noor and M. H. A., Rasid and M. R. M., Rejab and K., Kadirgama and M. M., Rahman (2009) Experimental Study On Noise Source Identification Of Split Unit Air Conditioner System. In: International Conference on Advance Mechanical Engineering (ICAME09), 22-25 June 2009 , Concorde Hotel, Shah Alam, Selangor. . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2009) Experimental and Numerical Study of Cutting Force in End-Milling Operation Using Statistical Method. In: 12th Cirp Conference On Modelling Of Machining Operations, 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

M. M., Noor and T. T., Mon and K., Kadirgama and R. A., Bakar (2009) Finite Element Analysis on Thermal Effect of the Vehicle Engine. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and M. R. M., Rejab (2009) Finite Element Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 Jun 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

M. R. M., Rejab and M. M., Noor and K., Kadirgama and M. M., Rahman and Z., Ahmad@Manap and M. S. M., Sani and R., Daud (2009) An Investigation of Profiles for Plate Cams with Vertical In-line Roller Followers. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. S. M., Sani and M. M., Noor and M. S. M., Zainury and K., Kadirgama and M. R. M., Rejab and M. M., Rahman (2009) Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09, 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. R. M., Rejab and M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2009) Mechanical Behaviour of Polymeric Foam Core at Various Orientation Angles. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09, 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

M. M., Rahman and M. M., Noor and R. A., Bakar and K., Kadirgama (2009) Modeling and Engine Performance of Direct Injection Hydrogen Fueled Engine. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

M. Y., Taib and K., Kadirgama and M. M., Noor and M. S. M., Sani (2009) Performance Analysis of a Domestic Refrigerator in Malaysia using Experimental Method. In: Proceeding of International Conference on Recent and Emerging Advanced Technologies in Engineering (iCREATE 2009) , 23-24 November 2009 , Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2009) Prediction Modelling Of Power And Torque In End-Milling. In: 11th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI09, 8 – 10 June 2009 , Algarve, Portugal. . (Unpublished)

R., Daud and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2009) Prediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2009, 18–20 March 2009 , Hong Kong. pp. 1-6., II. ISBN 978-988-17012-7-5

M. M., Noor and K., Kadirgama (2009) Response Surface Method and Neural Network to Determine Surface Roughness for Laser Cutting on Acrylic Sheets. In: 12th Cirp Conference On Modelling Of Machining Operations, 7-8 May 2009 , San Sebastian (Spain). . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. R. M., Rejab and M. M., Rahman and M. Y., Taib (2009) Student Performance Analysis Using Artificial Intelligent Method. In: Malaysian Technical Universities Conference on Engineering and Technology, 20-22 June 2009 , MS Garden Hotel, Kuantan, Pahang, Malaysia. .

K., Kadirgama and M. M., Noor and M. M., Rahman and M. S. M., Sani (2009) Surface Roughness Analysis In End Milling With Response Ant Colony Optimization. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009), 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. S. M., Sani and M. M., Rahman and M. R. M., Rejab (2009) Tool Life Analysis By Partial Swarm Optimisation. In: 6th International Conference on Numerical Analysis in Engineering (NAE2009), 15 -16 May 2009 , Lombok Island, Mataram City, West Nusa Tenggara Province, Indonesia.. . (Unpublished)

M. M., Noor and K., Kadirgama and Julie J., Mohamed and M. R. M., Rejab (2008) Analysis of Connecting Rod Based on Finite Eliment Approach. In: Malaysian Technical Universities Conference on Engineering and Technology , 8-10 March 2008 , Putra Palace, Perlis, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and D., Ramasamy and M. S. M., Sani (2008) CFD Simulation And Validation Of The In-Cylinder Within A Motored Two Stroke Si Engine. In: International Conference on Science & Technology: Applications in Industry & Education (2008), 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. and M. S. M., Sani (2008) Design A New Household Recycle Trash Bin. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and D., Ramasamy and M. R. M., Rejab (2008) Design and Simulate Mixing of Compressed Natural Gas with Air in a Mixing Device. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis, Malaysia. .

K., Kadirgama and M. M., Noor and M. M., Rahman and N. M. Zuki, N. M. and M. R. M., Rejab and B., Mohammad (2008) Design and development of blow mould using machining optimization parameters. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. R. M., Rejab and Z., Ghazalli and M. A., Hassan (2008) Developing a Cutting Tool with Mild Steel for Printed Circuit Board. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. .

M. M., Noor and K., Kadirgama and D., Ramasamy and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of A High Pressure Compressed Natural Gas Mixer for A 1.5 Litre CNG-Diesel Dual Engine. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani (2008) Development of Auto Car Jack Using Internal Car Power. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and R., Daud and M. R. M., Rejab (2008) Development of New Genetic Algorithm Software for Blow Mould Process. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

M. M., Noor and R., Daud and K., Kadirgama and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of Turret Punch Cutting Tool Using Reverse Engineering Method. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and K., Kadirgama and G. L., Ming (2008) Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19, 2008 , Kuching, Sarawak.. . (Unpublished)

M. R. M., Rejab and M. M., Rahman and K., Kadirgama and M. M., Noor (2008) Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19 , Kuching Sarawak, Malaysia. .

M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. R. M., Rejab and M. M., Noor and M. M., Rahman and K., Kadirgama and M. S. M., Sani and A. N. M., Rose and R. A., Bakar and A. S., Sulaiman (2008) Implementation of Outcome Based Education in the Faculty of Mechanical Engineering, Universiti Malaysia Pahang: An Experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Importance of the Pre-Requisite Subject. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2008) An Investigation into the Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks. In: Regional Conference on Vehicle Engineering and Technology, RIVET08, 15-17 July 2008 , Kuala Lumpur. pp. 22-26..

K., Kadirgama (2008) Modelling Of Tool Life When Milling Nickel Base Alloys With Two Different Coated Carbide Insert. In: SAIAS Symposium, 14-16 September 2008 , Stellenbosch, South Africa. . (Unpublished)

M. R. M., Rejab and K., Kadirgama and M. M., Noor and M. S. M., Sani (2008) Modification And Testing Of Four Axes Filament Winding Machine. In: Proceeding of International Conference on Science & Technology: Applications in Industry & Education (2008), 12-13 December 2008 , UiTM, Penang. .

K., Kadirgama and M. M., Noor and N. M. Zuki, N. M. and M. R. M., Rejab (2008) Prediction Of Cutting Force By Numerical Solution And Statistic Method In End-Milling Operation. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. M., Noor and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and M. M., Rahman and A. S., Sulaiman (2008) Quality Management System in Implementation of Outcome Based Education at Faculty of Mechanical Engineering, Universiti Malaysia Pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

M. M., Noor and M. R. M., Rejab and K., Kadirgama and F. R. M., Romlay and R., Daud (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of the 2nd Regional Engineering Conference on Sustainable Engineering Infrastructures Development and Management, 18-19 December 2008 , Kuching, Sarawak. pp. 33-38..

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6..

M. M., Rahman and M. M., Noor and M. R. M., Rejab and M. S. M., Sani and K., Kadirgama (2008) Study Of Air Fuel Ratio On Engine Performance Of Direct Injection Hydrogen Fueled Engine. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Kuala Lumpur. .

M. S. M., Sani and M. M., Rahman and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) Study on Dynamic Characteristics of Automotive Shock Absorber System. In: Malaysian Science and Technology Congress, MSTC08, 16-17 Dec 2008 , KLCC, Malaysia . . (Unpublished)

Monograph

Mahendran, Samykano and M. M., Rahman and D., Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Korada, Viswanatha Sharma and Azmi, W. H. and R. A., Bakar and M. M., Noor and K., Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Project Report. Universiti Malaysia Pahang. (Unpublished)

Thesis

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang.

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang.

This list was generated on Mon Dec 10 14:27:54 2018 +08.