Items where Division is "Faculty of Mechanical Engineering" and Year is 2016

A., Jamar and Z. A. A., Majid and Azmi, W. H. and M., Norhafana and A. A., Razak (2016) A Review of Water Heating System for Solar Energy Applications. International Communications in Heat and Mass Transfer, 76. pp. 178-187. ISSN 0735-1933. (Published)

A., Malik Hamat and M. F., Ghazali and Makeen, Mohd Amin and Fatihah, Adnan (2016) Irregularity Detection In Numerical Signal Using Time-Frequency Analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

A., Shah and S., Izman and Mas Ayu, Hassan (2016) Influence Of Nitrogen Flow Rate In Reducing Tin Microdroplets On Biomedical TI-13ZR-13NB Alloy. Jurnal Teknologi (Sciences and Engineering), 78 (5-10). pp. 6-10. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

A. A .M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanolubricant Automotive Air Conditioning (AAC) Test Rig. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

A. A., Mohammed and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab (2016) Effect of Sodium Hydroxide on The Tensile Properties of Sugar Palm Fibre Reinforced Thermoplastic Polyurethane Composites. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1765-1777. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. A., Razak and Z. A. A., Majid and Azmi, W. H. and M. H., Ruslan and Choobchian, Sh. and G., Najafi and K., Sopian (2016) Review on Matrix Thermal Absorber Designs for Solar Air Collector. Renewable and Sustainable Energy Reviews, 64. pp. 682-693. ISSN 1364-0321. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat (2016) Development of Nanorefrigerants for Various Types of Refrigerant based: A Comprehensive Review on Performance. International Communications in Heat and Mass Transfer, 76. pp. 285-293. ISSN 0735-1933. (Published)

A. F., Jusoh and M. R. M., Rejab and Siregar, J. P. and Bachtiar, Dandi (2016) Natural Fiber Reinforced Composites: A Review on Potential for Corrugated Core of Sandwich Structures. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00033). ISSN 2261-236X

A. G. N., Sofiah and Samykano, Mahendran and J., Rivas Murillo and Nurul Akmal, Che Lah and D., Ramasamy and K., Kadirgama and M. M., Rahman (2016) Effect of the length on the tensile deformation of nickel nanowires using molecular dynamics simulations. In: International Conference on Computational Science and Engineering 2016 , 28-30 November 2016 , The Magellan Sutera Resort, Kota Kinabalu. pp. 1-5., 4 (2).

A. N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D. M. and Khairi, Yusuf (2016) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). 10931 -10934. ISSN 1819-6608. (Published)

A. N., Oumer and N. T., Rao and F., Basrawi and Hassan, Ibrahim (2016) Numerical Simulation on Flow and Heat Transfer Characteristics of Supercritical Fluids in Mini-Channels. Journal of Advances in Technology and Engineering Research. pp. 1-5. ISSN 2414-4592. (Published)

A. R., Zulhishamuddin and S. N., Aqida and E. A., Rahim (2016) Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties. In: AIP Conference Proceedings: 19th International Esaform Conference On Material Forming (ESAFORM 2016) , 27–29 April 2016 , Nantes, France. pp. 1-6., 1769 (030004). ISBN 978-0-7354-1236-1

Abdul Adam, Abdullah and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin and Mohd Herzwan, Hamzah and Mohd Fahmi, Othman (2016) Analysis of Combustion Characteristics and Emissions of Diesel Engine Fueled With Waste Source Fuel. In: 4th European Conference on Renewable Energy Systems (ECRES 2016) , 28-31 August 2016 , Istanbul, Turkey. pp. 1-6.. (Unpublished)

Abdullah Make, Muhammad Razif and M. F. F., Ab Rashid and Razali, Muhamad Magffierah (2016) A Review of Two-sided Assembly Line Balancing Problem. International Journal of Advanced Manufacturing Technology. pp. 1-21. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Achmad, M. S. Hendriyawan and Priyandoko, Gigih and Mohd Razali, Daud and Hamzah, Ahmad (2016) Human-Robot Interaction for Remote Application. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 224-230.. ISBN 978-967-2054-04-7

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak (2016) Effect of vortex generator on the air-side thermal-hydraulic performance of flat tube heat exchangers. In: National Conference for Postgraduate Research (NCON-PGR) , 24-25 September 2016 , Universiti Malaysia Pahang, Malaysia. pp. 1-8.. (Unpublished)

Afzam, Zulkepli and Hassan, Ibrahim and Azri, Alias and F., Basrawi (2016) Review on the Recent Developments of Photovoltaic Thermal (PV/T) and Proton Exchange Membrane Fuel Cell (PEMFC) Based Hybrid System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00019). ISSN 2261-236X

Afzam, Zulkepli and Lim, Wei Yong and Mohd Yusof, Taib and Zafri, Azran and F., Basrawi (2016) Analysis on the Performance of Copper Indium Gallium Selenide (CIGS) Based Photovoltaic Thermal. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (02004). ISSN 2261-236X

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmed Yousif Adam, Mohammed and A. N., Oumer and Azri, Alias and M., Ishak (2016) Effect of Vortex Generator on the Air-Side Thermal-Hydraulic Performance of Flat Tube Heat Exchangers. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 582-590..

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Air Distributor Designs for Fluidized Bed Combustors: A Review. Engineering, Technology & Applied Science Research, 6 (3). pp. 1029-1034. ISSN 1792-8036. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and A. N., Oumer (2016) Improvement On Particulate Mixing Through Inclined Slotted Swirling Distributor In A Fluidized Bed: An Experimental Study. Advanced Powder Technology, 27 (5). pp. 2102-2111. ISSN 0921-8831. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2016) Characterization and Development of Geldart’s Fluidizing Velocity Profile of Sand Particles for the Application in Fluidized Bed Combustor (FBC). In: Regional Conference on Science, Technology and Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 147-156. ISBN 978-981-10-0532-9 (Print); 978-981-10-0534-3 (Online)

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and Ahmmad Shukrie, Md Yudin and F., Basrawi and Mohd, Nazani (2016) Modelling flood reservoir integrated with pumped hydropower storage for electricity production using HOMER. In: Symposium on Energy Systems 2016 (SES 2016) , 21 September 2016 , Pekan, Pahang. pp. 1-7.. (Unpublished)

Aishah, Safi and Shahrani, Anuar and D. M. N., D. Idris and F., Basrawi and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2016) Feasibility of Pumped Hydro Storage for Energy Production and Flood Mitigation in Pekan. International Journal of Advanced and Applied Sciences, 3 (5). pp. 39-43. ISSN 0973-4562(print); 0973-9769(online). (Published)

Amanlou, Yasaman and Hashjin, Teymour Tavakoli and Ghobadian, B. and G., Najafi and R., Mamat (2016) A comprehensive review of Uniform Solar Illumination at Low Concentration Photovoltaic (LCPV) Systems. Renewable and Sustainable Energy Reviews, 60. pp. 1430-1441. ISSN 1364-0321. (Published)

Amir, Aziz and Atiqah, Nisfun and R., Mamat and Ahmad Fitri, Yusop and Najafi, G. (2016) Properties of Biodiesel Derived from Vegetable Oil, Animal Fat and Waste Cooking Oil. In: 6th International Conference On “Engineering & Technology, Computer, Basic & Applied Sciences-ECBA , 29-30 July 2016 , Osaka Japan. pp. 1-6.. (Unpublished)

Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Investigation of Waste Cooking Oil as a Tribological Lubricant for Piston Skirt Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Aravinda, Kottasamy and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and M. M., Noor and M. M., Rahman (2016) Aluminium Oxide (AL2O3) Nanoparticles with Long Life Coolant for Car Radiator Application. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Asmara, Y. P. and J. P., Siregar and Cionita, Tezara and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-6. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Asmara, Y. P. and M. F., Ismail and L., Giok Chui (2016) Predicting Effects of Corrosion Erosion of High Strength Steel Pipelines Elbow on CO2-Acetic Acid (HAc) Solution. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-5., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Asmara, Y. P. and Siregar, J. P. and C., Tezara and Wan, Nurlisa and J., Jamiluddin (2016) Long Term Corrosion Experiment of Steel Rebar in Fly Ash-Based Geopolymer Concrete in NaCl Solution. International Journal of Corrosion. (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and H. N. M., Zuki and Siregar, J. P. and Bachtiar, Dandi and T., Kurniawan and M. C., Ismail (2016) Corrosion Inhibition of Carbon Steel in Oil and Gas Environments. International Journal of Advanced and Applied Sciences, 3 (5). pp. 88-91. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

Atnaw, Samson M. and Singh, Lakhveer and Hagos, F. Y. and Yousuf, Abu (2016) Road Construction Equipment Management: A Case Study on Selected Industry. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 91-97. ISSN 2289-697X. (Published)

Awad, Omar I. and R., Mamat and Obed M., Ali and I. M., Yusri (2016) Effect of Fuel Oil - Gasoline Fusel Blends on the Performance and Emission Characteristics of Spark Ignition Engine: A Review. Journal of Scienctific Research & Development , 3 (5). pp. 31-36. ISSN 1115-7569. (Published)

Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and R., Mamat (2016) Thermal Conductivity Enhancement Of AL2O3 and SIO2 Nanolubricants. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-9.. (Unpublished)

Azmi, W. H. and Khamisah, Abdul Hamid and N. A., Usri and R., Mamat and K. V., Sharma (2016) Heat Transfer Augmentation of Ethylene Glycol: Water Nanofluids and Applications – A review. International Communications in Heat and Mass Transfer, 75. pp. 13-23. ISSN 0735-1933. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and R., Mamat and K. V., Sharma and Mohd Sham, Mohamad (2016) Effects of Working Temperature on Thermo-Physical Properties and Forced Convection Heat Transfer of TiO2 Nanofluids in Water–Ethylene Glycol Mixture. Applied Thermal Engineering, 106. pp. 1190-1199. ISSN 1359-4311. (Published)

Azmi, W. H. and Khamisah, Abdul Hamid and Usri, N. A. and R., Mamat and Mohd Sham, Mohamad (2016) Heat Transfer and Friction Factor of Water and Ethylene Glycol Mixture Based TiO2 and Al2O3 Nanofluids Under Turbulent Flow. International Communications in Heat and Mass Transfer, 76. pp. 24-32. ISSN 0735-1933. (Published)

B., Norhafzan and S. N., Aqida and E., Chikarakara and D., Brabazon (2016) Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Applied Physics A. pp. 2-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Balakrishnan, Yogaraja and At-Tasneem, Mohd Amin (2016) Parametric Study of Multiple Configurations of Pico Hydrokinetic Turbines using CFD. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8., 74 (00024). ISSN 2261-236X

Brubaker, C. E. and Messersmith, P. B. and S. N., Aqida (2016) Biological Adhesion. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-22. ISBN 978-0-12-803581-8

C. W., Mohd Noor and R., Mamat and G., Najafi and Mohd Hafizil, Mat Yasin and C. K., Ihsan and M. M., Noor (2016) Prediction of Marine Diesel Engine Performance by Using Artificial Neural Network Model. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1917-1930. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

C. W., Mohd Noor and R., Mamat and Wan Mohd, Norsani and M. M., Noor (2016) An investigation of using palm biodiesel blend on the performance of a stationary marine diesel engine. Defence S&T Technical Bulletin, 9 (2). pp. 86-97. ISSN 1985-6571. (Published)

C. Zafirah, Rosly and Ummu Kulthum, Jamaludin and Nurul Suraya, Azahari (2016) Parametric Study on Efficiency of Archimedes Screw Turbine. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10904-10908. ISSN 1819-6608. (Published)

Chang, Tai Ann (2016) Development and analysis of direct current low energy micro-sheet-forming machine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Mathivanan and H., Norfazilah and J. P., Siregar and M. R. M., Rejab and Bachtiar, Dandi and C., Tezara (2016) The Study of Mechanical Properties of Pineapple Leaf Fibre Reinforced Tapioca Based Bioplastic Resin Composite. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00016). ISSN 2261-236X

D., Ramasamy and M. M., Noor and M. M., Rahman and W. G. B. , Horizon (2016) Analysis of Modifications on a Spark Ignition Engine for Operation with Natural Gas. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00031). ISSN 2261-236X

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

D. N., Noor and Azim, Arshad and Z., Azran and Hassan, Ibrahim and F., Basrawi (2016) A Review on the Recent Development of Solar Absorption and Vapour Compression based Hybrid Air Conditioning with Low Temperature Storage. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (02007). ISSN 2261-236X

Damirchi, Hojjatollah and G., Najafi and Alizadehnia, Siamak and R., Mamat and Che Sidik, Nor Azwadi and Azmi, W. H. and M. M., Noor (2016) Micro Combined Heat and Power to Provide Heat and Electrical Power using Biomass and Gamma-type Stirling Engine. Applied Thermal Engineering, 103. pp. 1460-1469. ISSN 1359-4311. (Published)

Ervina Efzan, Ervina Efzan and Nur Faziera, Mhd Nasir and Siti Rabiatull Aisha, Idris (2016) A Review: Lead Free Solder and Its Wettability Properties. Soldering & Surface Mount Technology, 28 (3). pp. 125-132. ISSN 0954-0911. (Published)

F., Basrawi and Ibrahim, Thamir K. and Khairul, Habib and Yamada, Takanobu (2016) Effect of Operation Strategies on the Economic and Environmental Performance of a Micro Gas Turbine Trigeneration System in a Tropical Region. Energy, 97. pp. 262-272. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

F., Basrawi and Izwan, Ismail and Thamir Khalil, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Shahrani, Anuar (2016) A Study On The Power Generation Potential Of Mini Wind Turbine In East Coast Of Peninsular Malaysia. In: International Tropical Renewable Energy Conference (i-TREC) 2016 , 26-28 October 2016 , Bogor, Indonesia. pp. 1-9.. (Unpublished)

F., Basrawi and M. R. R., Chand and K. H., Koo and Ibrahim, Thamir K. (2016) Theoretical Analysis on the Economic Performance of Micro Gas Turbine-Trigeneration System with Different Operation Strategies for Residential Building in a Tropical Region. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38 (01003). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and A. A., Yusof (2016) Simulation of Storage Performance on Hydro-Pneumatic Driveline. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-15..

F., Wasbari and R. A., Bakar and Gan, Leong Ming and Ahmad Anas, Yusof and Zarina, Amat Jafar (2016) Simulation of Storage Performance on Hydropneumatic Driveline in Dual Hybrid Hydraulic Passenger Car. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-13., 90 (01052). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. A., Salim (2016) Feasibility Studies on Utilization of Low-Pressure in Hydro-pneumatic Driveline. Journal of Engineering and Technology (JET), 7 (2). pp. 28-42. ISSN 2180-3811. (Published)

F. A., Fauzi and Kurniawan, Tedi and Y. S., Bin and W. S., Wan Harun (2016) Chromium Enrichment on P11 Ferritic Steel by Pack Cementation. In: MATEC Web of Conferences: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-3., 74 (00036). ISSN 2261-236X

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Tezara, C. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calorimetric Analysis. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-7., 78 (01042). ISSN 2261-236X

F. M., Suhaimi and J. G., Chase and G. M., Shaw and Ummu Kulthum, Jamaludin and Normy Norfiza, A. Razak (2016) Prediction of Sepsis Progression in Critical Illness Using Artificial Neural Network. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 127-132. ISBN 978-981-10-0265-6 (print); 978-981-10-0266-3 (online)

F. R. M., Romlay and Wan Azhar, Wan Yusoff and Kamal Arifin, Mat Piah (2016) Increasing the Efficiency of Traveling Wave Ultrasonic Motor by Modifying the Stator Geometry. Ultrasonics Sonochemistry, 64. pp. 177-185. ISSN 1350-4177. (Published)

Farah Ayuni, Fauzi and Z., Ghazalli and Siregar, J. P. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calometric Analysis. In: The International Conference on Green Design and Manufacture 2016 , 1-2 May 2016 , Phuket, Thailand. pp. 1-6.. (Unpublished)

Fatimah, Dzaharudin and Ummu Kulthum, Jamaludin and Mohd Nazri, Kasuan (2016) Numerical Study on the Effects of a Boundary on the Chaotic Behavior of a Small Cluster of Microbubbles in an Ultrasonic Field. In: 4th International Conference on Mathematical Sciences , 15-17 November 2016 , Putrajaya, Malaysia. . (Unpublished)

Fazilah, Abdul Aziz and Zakri, Ghazalli and N. M. Zuki, N. M. (2016) Alternative structure of new knowledge-based ergonomics risk assessment system. In: The 4th SEANES International Conference on Human Factors and Ergonomics in South East Asia , 28 November 2016 - 1 Disember 2016 , Bandung, Indonesia. pp. 1-11.. (Unpublished)

H., Hanafi and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Numerical Modeling on Homogeneous Charge Compression Ignition Combustion Engine Fueled by Diesel-Ethanol Blends. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9., 74 (00037). ISSN 2261-236X

H., Hanafi and M. M., Noor and M. M., Rahman and K., Kadirgama and D., Ramasamy and C. K., Ihsan and M. K., Kamarulzaman and Y., Selvaraj (2016) Numerical Study of N-Heptane Fuelled Hcci Under Different Air Fuel Ratio and Inlet Air Temperature. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV) 2016 , 1-4 August 2016 , MAI, Cyberjaya. . (Unpublished)

H. M., Asnida and Sakinah, Muhamad Hisham and M. M., Noor and K., Kadirgama and D., Ramasamy (2016) Copper (II) Oxide Nanoparticle As Friction Reduction and Anti-Wear Additive In Lubricating Oil. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

H. M., Mahmudul and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah (2016) Impact of Oxygenated Additives to Diesel-Biodiesel Blends in the Context of Performance and Emissions Characteristics of a CI Engine. IOP Conference Series: Materials Science and Engineering, 160 (1). pp. 1-10. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

Hagos, F. Y. and Abd Rashid, A. Aziz and Shaharin, A. Sulaiman (2016) Effect of Injection Timing on Combustion, Performance and Emissions of Lean-burn Syngas (H2/CO) in Spark-Ignition Direct-Injection Engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 1468-0874 (print); 2041-3149 (online). (Published)

Hagos, F. Y. and Abd Rashid, Abd Aziz and Shaharin Anwar, Sulaiman and Mahgoub, Bahaaddein K. M. (2016) Low and Medium Calorific Value Gasification Gas Combustion in IC Engines. In: Developments in Combustion Technology. InTech, Croatia, pp. 1-28. ISBN 978-953-51-2668-3 (Print); 978-953-51-2669-0 (Online)

Hamada, Khalaf I. and M. M., Rahman and D., Ramasamy and M. M., Noor and K., Kadirgama (2016) Numerical Investigation of In-Cylinder Flow Characteristics of Hydrogen-Fuelled Internal Combustion Engine. Journal of Mechanical Engineering and Sciences (JMES), 10 (1). pp. 1792-1802. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hamat, A. Malik and M. F., Ghazali and Amin, Makeen and Fatihah, Adnan (2016) Irregularity detection in artificial signal using time-frequency analysis. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3593-3597. ISSN 1819-6608. (Published)

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and M. F. F., Ab Rashid and A. N. M., Rose (2016) Ergonomics study for workers at food production industry. In: 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute (MAI)Cyberjaya, Selangor. pp. 1-7., 90. ISSN 2261236X

Haque, Muhammad E. and R. A., Bakar and Gan, Leong Ming and Shakaib, M. (2016) Predicting Airflow and Temperature Pattern Inside A Refrigerator Through CFD. ARPN Journal of Engineering and Applied Sciences, 11 (14). 8621 -8628. ISSN 1819-6608. (Published)

Haque, Muhammad E. and R. A., Bakar and K., Kadirgama and M. M., Noor and Shakaib, M. (2016) Performance of a Domestic Refrigerator Using Nanoparticles-Based Polyolester Oil Lubricant. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1778-1791. ISSN 2289-4659. (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Deposition of Electroless Nickel Boron as Printed Circuit Board Surface Finish. Advanced Materials Research, 1133. pp. 391-395. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Influence of Second Reflow on the Intermetallic Compound Growth with Different Surface Finish. Key Engineering Materials, 701. pp. 127-131. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Intermetallic Growth and Shear Strength of SAC305/EN-Boron. Soldering & Surface Mount Technology, 28 (3). pp. 141-148. ISSN 0954-0911. (Published)

Hartwig, J. B. and Hartwig, J. and S. N., Aqida (2016) X-Ray Topography. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-9. ISBN 978-0-12-803581-8

Hasan, Mohammad Mehedi (2016) Numerical investigation on combustion, performance and emissions characteristics in homogeneous charge compression ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassan, A. Abdulhadi and S. N., Aqida and M., Ishak and Mohammed, Ghusoon R. (2016) Thermal Fatigue of Die-Casting Dies: An Overview. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00032). ISSN 2261-236X

Hayder Baqer, Mahdi (2016) Effect of ambient temperature on the performance of combined cycle power plant with cooling system in a subtropical region. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hazwan, Syafiq and A. M. N., Kamarizan and M. F., Ghazali and A. R., Yusoff (2016) Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00002). ISSN 2261-236X

Herwansyah, Lago and Mohd Faizal, Jamlos and Soh, Ping J. and Vandenbosch, Guy A. E. (2016) AMC-integrated reconfigurable beamforming folded dipole antenna with parasitic and RF MEMS. Progress In Electromagnetics Research C, 69. pp. 159-167. ISSN 1937-8718. (Published)

Herwansyah, Lago and Ping, Jack Soh and Mohd Faizal, Jamlos and Nursuriati, Shohaimi and Sen, Yan and Vandenbosch, Guy A. E. (2016) Textile Antenna Integrated with Compact AMC and Parasitic Elements for WLAN/WBAN Applications. Applied Physics A, 122 (1059). pp. 1-6. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

Hind, M. Kh. and Özakça, Mustafa and Ekmekyapar, Talha and Abdolbaqi, Mohammed Khdher (2016) Flexural behavior of concrete beams reinforced with different types of fibers. Computers and Concrete, 18 (5). pp. 999-1018. ISSN 1598-8198. (Published)

Hind, Mahmood Khudhur and Mustafa, Özakça and Abdolbaqi, Mohammed Khdher and Talha, Ekmekyapar (2016) Flexural Performance of PVA Reinforced ECC Beams: Numerical and Parametric Studies. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 625-640..

I. M., Yusri and R., Mamat and Amir, Aziz and Ahmad Fitri, Yusop and Awad, Omar I. and S. M., Rosdi (2016) Investigation of Emissions Characteristics of Secondary Butyl Alcohol-Gasoline Blends in a Port Fuel Spark Ignition Engines. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-12.. (Unpublished)

I. M., Yusri and R., Mamat and Azmi, W. H. and G., Najafi and N. A. C., Sidik and Awad, Omar I. (2016) Experimental Investigation of Combustion, Emissions and Thermal Balance of Secondary butyl alcohol-gasoline Blends in a Spark Ignition Engine. Energy Conversion and Management, 123. pp. 1-14. ISSN 0196-8904. (Published)

I. M., Yusri and R., Mamat and Obed M., Ali and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and H. M., Mahmudul (2016) The Combustion Of N-Butanol-Diesel Fuel Blends And Its Cycle To Cycle Variability In A Modern Common-Rail Diesel Engine. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2297-2301. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and Awad, Omar I. and M. Kh., Abdolbaqi (2016) Thermal and Economic Analysis of Gas Turbine Using Inlet Air Cooling System. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-10.. (Unpublished)

Ibrahim, Thamir K. and F., Basrawi and Marwah Noori, Mohammed and Hassan, Ibrahim (2016) Effect Of Perforation Area On Temperature Distribution Of The Rectangular Fins Under Natural Convection. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6371-6375. ISSN 1819-6608. (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman and F., Basrawi (2016) Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim Khalil, Adam and A. Rashid, A. Aziz and Suzana, Yusup and Morgan, Heikel and Hagos, F. Y. (2016) Optimization of Performance and Emissions of a Diesel Engine Fuelled with Rubber Seed-Palm Biodiesel Blends using Response Surface Method. Asian Journal of Applied Sciences, 4 (2). pp. 401-421. ISSN 2321–0893. (Published)

Irnie, Zakaria and Azmi, W. H. and A. M. I., Mamat and R., Mamat and R. , Saidur and S. F., Abu Talib and W. A. N., W. Mohamed (2016) Thermal Analysis of Al2O3–water Ethylene Glycol Mixture Nanofluid for Single PEM Fuel Cell Cooling Plate: An Experimental Study. International Journal of Hydrogen Energy, 41 (9). pp. 5096-5112. ISSN 0360-3199. (Published)

Isafiq, M. and Shayfull, Z. and Nasir, S. M. and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01084). ISSN 2261-236X

Islam, M. R. and M., Ishak and Luqman Hakim, Ahmad Shah and Siti Rabiatull Aisha, Idris and Meric, C. (2016) Dissimilar Welding Of A7075-T651 and AZ31B Alloys by Gas Metal Arc Plug Welding Method. The International Journal of Advanced Manufacturing Technology, 88 (9). pp. 2773-2783. ISSN 0268-3768(Print); 1433-3015(Online). (Published)

Ismail Ali, Hj Abdul Aziz and D. M. N., D. Idris and Wafiuddin, Md Ghazali (2016) Investigating Bending Strength of Spur Gear : A Review. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01037).

J. A., Ghani and C. H., Che Haron and Mohd Shahir, Kasim and Mohd Amri, Sulaiman and Siti Haryani, Tomadi (2016) Wear Mechanism of Coated and Uncoated Carbide Cutting Tool in Machining Process. Journal of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914 (print); 2044-5326 (online). (Published)

Jamiluddin, Jaafar and J. P., Siregar and A., Sulaiman and K. A. A., Jalal and Tezara, C. (2016) Study on Properties of Tapioca Resin Polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3178-3189. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Jasri, Mohamad (2016) A New Tool to Acquire Sheet Metal Cyclic Plasticity Data for Hardening Models. In: Conference Proceedings: International Conference On Materials Science, Metal & Manufacturing (M3 2016) , 18-19 January 2016 , Singapore. pp. 94-100.. ISSN 2251-1857

Jasri, Mohamad and Wan Iryana, Wan Md Nor (2016) Reliability of Isotropic Model in Finite Element Simulation to Predict Wrinkling in Deep Drawing Process. In: MATEC Web of Conferences: 7th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2016) , 1-3 February 2016 , Cape Town, South Africa. pp. 1-4., 54 (03003). ISSN 2261-236X

K., Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri (2016) Thermal Conductivity Enhancement of TiO2 Nanofluid in Water and Ethylene Glycol (EG) Mixture. Indian Journal of Pure & Applied Physics, 54. pp. 651-655. ISSN 0975-1041. (Published)

K. A., Hamid and Azmi, W. H. and R., Mamat and K. V., Sharma (2016) Experimental Investigation on Heat Transfer Performance of TiO2 Nanofluids in Water-Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 73. pp. 16-24. ISSN 0735-1933. (Published)

K. I., Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2016) The Effect of Shielding Gas Flow Rate on Fiber Laser Welding of Boron Steel. In: 3rd TMAC Symposium 2016 , 28 Feb - 1 March 2016 , UTEM Melaka. pp. 1-5.. (Unpublished)

K. M., Ahmad and Mohd Rashidi, Maarof and M., Ishak and M. S., Huzairi (2016) Microstructure and Mechanical Properties of Austenitic Compacted Cast Iron with Additive Manganese. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00009). ISSN 2261-236X

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Sarma, P. K. and Vijayalakshmi, Bathula (2016) Theoretical Analysis of Heat Transfer and Friction Factor for Turbulent Flow of Nanofluids through Pipes. The Canadian Journal of Chemical Engineering, 94 (3). pp. 565-575. ISSN 1939-019X. (Published)

K. V., Sharma and Azmi, W. H. and Kamal, Subhash and Suhaimi, Hasan (2016) Numerical Analysis of Experimental Turbulent Forced Convection Heat Transfer for Nanofluid Flow in a Tube. Applied Mechanics and Materials, 819. pp. 132-141. ISSN 1662-7482. (Published)

Kaaliarasan, Ramachandran and Balakumaran, Yeesvaran and K., Kadirgama and D., Ramasamy and S. A., Che Ghani and Keeran, Anamalai (2016) State of Art of Cooling Method for Dry Machining. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90.

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2016) Development of a Complete Single Jet Common Rail Injection System Gas Dynamic Model for Hydrogen Fueled Engine with Port Injection Feeding System. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (6). pp. 976-984. (Published)

Kettner, M. and Dechent, S. and Hofmann, M. and Huber, E. and Arruga, H. and R., Mamat and G., Najafi (2016) Investigating the Influence of Water Injection on the Emissions of a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1863-1881. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Khamisah, Abdul Hamid (2016) Experimental investigation on forced convection heat transfer of water - ethylene glycol based TIO2 nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khan, Md. Ashikur Rahman and M. M., Rahman and Salehina, Zayed Us and Rahman, Md. Saifur (2016) Optimal Set-up and Surface Finish Characteristics in Electrical Discharge Machining on Ti-5al-2.5sn using Graphite. Perspectives in Science, 8. pp. 440-443. ISSN 2213-0209. (Published)

Khor, Ai Chia and Mohd Rusllim, Mohamed and M. H., Sulaiman and Hamdan, Daniyal and A. N., Oumer and P. K. , Leung (2016) Numerical Investigation on Serpentine Flow Field and Rhombus Electrolyte Compartment of Vanadium Redox Flow Battery (V-RFB). ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6715-6720. ISSN 1819-6608. (Published)

Kurniawan, Tedi and Farah Alia, Fauzi and Asmara, Y. P. (2016) High-temperature Oxidation of Fe-Cr Steels in Steam Condition - A Review. Indonesian Journal of Science & Technology, 1 (1). pp. 107-114. ISSN 2527-8045. (Published)

Kuwagi, Kenya and Takami, Toshihiro and Azri, Alias and Rong, Degang and Takeda, Hiroshi and Yanase, Shinichiro and Kouchi, Toshinori and Hyakutake, Toru and Yokoyama, Kaoru and Ohara, Yoshiyuki and Takahashi, Nobuo and Sugitsue, Noritake (2016) Development of DEM-CFD Simulation of Combustion Flow in Incinerator with the Representative Particle Model. Journal of Chemical Engineering of Japan, 49 (5). pp. 425-434. ISSN 0021-9592. (Published)

L. H., Shah and U. K., Mohamad and K. I., Yaakob and A. R., Razali and M., Ishak (2016) Lap Joint Dissimilar Welding of Aluminium AA6061 and Galvanized Iron Using TIG Welding. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1817-1826. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi and G. H. R., Kefayati (2016) A Review on Why Researchers Apply External Magnetic Field on Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 60-67. ISSN 0735-1933. (Published)

M'hamed, Beriache and Nor Azwadi, Che Sidik and Mohd Faizal, Ali Akhbar and R., Mamat and G., Najafi (2016) Experimental study on thermal performance of MWCNT nanocoolant in Perodua Kelisa 1000cc radiator system. International Communications in Heat and Mass Transfer, 76. pp. 156-161. ISSN 0735-1933. (Published)

M., Hussein Adnan and R. A., Bakar and K., Kadirgama and K. V., Sharma (2016) Heat Transfer Enhancement with Elliptical Tube Under Turbulent Flow Tio2-Water Nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 2334-7163. (Published)

M., Ishak (2016) Introductory Chapter: A Brief Introduction to Joining and Welding. In: Joining Technologies. Intech, Croatia. ISBN 978-953-51-2596-9 (Print); 978-953-51-2597-6 (online)

M., Ishak and Siti Rabiatull Aisha, Idris and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611 Manufacturing Processes Laboratory. Penerbit Universiti Malaysia Pahang, Kuantan, Malaysia. ISBN 978-967-0691-97-8

M., Jamshidian and P., Thamburaja and T., Rabczuk (2016) Modeling the Effect of Surface Energy on Stressed Grain Growth in Cubic Polycrystalline Bodies. Scripta Materialia, 113. pp. 209-213. ISSN 1359-6462. (Published)

M., Kamal and M. M., Rahman (2016) Multiaxial Fatigue Life Modelling using Hybrid Approach of Critical Plane and Genetic Algorithm. Fatigue & Fracture of Engineering Materials & Structures, 39 (4). pp. 479-490. ISSN 1460-2695. (Published)

M. A., Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Tribological Behaviour Improvement of Lubricant Using Copper (II) Oxide Nanoparticles as Additive. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (2). pp. 363-371. (Published)

M. A., Maleque and M. M., Rahman (2016) Wear Study of Mg-SiCp Reinforcement Aluminium Metal Matrix Composite. Journal of Mechanical Engineering and Sciences (JMES) , 10 (1). pp. 1758-1764. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. E., Babiker and A. R. A., Aziz and M., Heikal and S., Yusup and Hagos, F. Y. (2016) Experimental and Simulation Study on Steam Gasification of Phoenix-Dactylifera Date Palm Seeds. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3201-3214. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2016) Multi-Objective Discrete Particle Swarm Optimisation Algorithm for Integrated Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-16. ISSN 2041-2975. (Published)

M. F. F., Ab Rashid and M. M., Razali and Make, M. R. Abdullah and N. M. Zuki, N. M. and A. N. M., Rose (2016) NSGA-II Algorithm for Assembly Line Balancing with Multi-Resource Constraints. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 317-321.. ISBN 978-967-2054-04-7

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. Advances in Smart Systems Research, 5 (1). pp. 30-38. ISSN 2050-8662. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2016) Multi-Objective Optimisation of CNC Milling Process for Al 6061 using Modified NSGA-II. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES 2016) , 5-7 September 2016 , York, United Kingdom. pp. 1-8.. (Unpublished)

M. F. F., Ab Rashid and W. S., Wan Harun and S. A., Che Ghani (2016) Optimization of EDM Small Hole Drilling Process Using Taguchi Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2501-2504. ISSN 1819-6608. (Published)

M. H. S., Harun and M. F., Ghazali and A. R., Yusoff (2016) Tri-axial Time-frequency Analysis for Tool Failures Detection in Deep Twist Drilling Process. Procedia CIRP, 46. pp. 508-511. ISSN 2212-8271. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and K. V., Sharma and G., Najafi (2016) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of BioGlycol - Water Mixture Based Al2O3 Nanofluid. Applied Thermal Engineering, 102 (June). pp. 932-941. ISSN 1359-4311. (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat and N. M. Zuki, N. M. and G., Najafi (2016) Experimental Investigation of Turbulent Heat Transfer by Counter and Co-Swirling Flow in a Flat Tube Fitted with Twin Twisted Tapes. International Communications in Heat and Mass Transfer, 75. pp. 295-302. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and N. A. C., Sidik and Azmi, W. H. and R., Mamat (2016) An Experimental Determination of Thermal Conductivity and Electrical Conductivity of Bio Glycol Based Al2O3 Nanofluids and Development of New Correlation. International Communications in Heat and Mass Transfer, 73. pp. 75-83. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Amir, Aziz and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) An Experimental Determination of Thermal Conductivity and Viscosity of BioGlycol/water based TiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 22-32. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Mohd Fadzil, Abdul Rahim and R., Mamat and Azmi, W. H. and Mohammad Noor Afiq Witri, Muhammad Yazid and G., Najafi (2016) Experimental Investigation and Development of New Correlation for Thermal Conductivity and Viscosity of BioGlycol/water based SiO2 Nanofluids. International Communications in Heat and Mass Transfer, 77. pp. 54-63. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat and Azmi, W. H. and Hind, M. Kh. (2016) Experimental and Numerical Investigation of Heat Transfer Augmentation Using Al2o3-Ethylene Glycol Nanofluids Under Turbulent Flows in a Flat Tube. Jurnal Teknologi (Sciences and Engineering), 78 (9-2). pp. 39-44. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. M., Hasan and M. M., Rahman (2016) Homogeneous Charge Compression Ignition Combustion: Advantages Over Compression Ignition Combustion, Challenges and Solutions. Renewable and Sustainable Energy Reviews, 57. pp. 282-291. ISSN 1364-0321. (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2016) Optimization of Abrasive Machining of Ductile Cast Iron Using Tio2 Nanoparticles: A Multilayer Perceptron Approach. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2529-2534. ISSN 1819-6608. (Published)

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and A. F., Jusoh and N. Z. M., Zaid and W. J., Cantwell (2016) The Mechanical Behaviour of Foam-filled Corrugated Core Sandwich Panels In Lateral Compression. In: Proceedings of the American Society for Composites 2016 , 19-22 September 2016 , Williamsburg, Virginia, USA. .

M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and Paruka, P. and S. H. S. M., Fadzullah and Zhang, B. and Cantwell, W. J. (2016) The Mechanical Behavior of Foam-filled Corrugated Core Sandwich Panels in Lateral Compression. In: Proceedings of the American Society for Composites 2016: Thirty-First Technical Conference on Composite Materials , 19-22 September 2016 , Williamsburg, Virginia. pp. 1-17.. ISBN 978-1-60595-316-8

M. R. M., Rejab and N. Z. M., Zaid and J. P., Siregar and Bachtiar, Dandi (2016) Scaling Effects for Compression Loaded of Corrugated-core Sandwich Panels. Advanced Materials Research, 1133. pp. 241-245. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

M. R. R., Chand and F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Afzam, Zulkepli (2016) A Study on Energy Consumption of a Resort Located in the East Coast of Malaysia. International Journal of Advanced and Applied Sciences, 3 (5). pp. 49-54. ISSN 0973-4562 (Print); 0973-9769 (Online). (Published)

M. R. R., Chand and Hassan, Ibrahim and Zafri, Azran and Azim, Arshad and F., Basrawi (2016) Review on Recent Development Micro Gas Turbine -Trigeneration System and Photovoltaic Based Hybrid Energy System. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-7., 74 (00028). ISSN 2261-236X

M. S., Ali and M. T., Musthafah and A. M., Mohd Shafei and A. M. T., Khairil and N. F. M., Noordin and R. A., Bakar (2016) Performance of Compressed Natural Gas (CNG) Engine with Pre Chamber. In: Proceedings of Mechanical Engineering Research Day 2016 , 31 March 2016 , Universiti Teknikal Malaysia Melaka. pp. 7-8.. ISBN 978-967-0257-70-9 (online)

M. S., Norhidayah and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-4., 74 (00014). ISSN 2261-236X

M. S., Reza and S. N., Aqida and I., Ismail (2016) Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface. Applied Physics A, 122 (611). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

M. S., Shaari and M. R. M., Akramin and A. K., Ariffin and S., Abdullah and Masanori, Kikuchi (2016) Prediction of Fatigue Crack Growth for Semi-Elliptical Surface Cracks using S-version Fem under Tension Loading. Journal of Mechanical Engineering and Sciences (JMES) , 10 (3). pp. 2375-2386. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. S. M., Sani and H., Ouyang (2016) Identification of Nonlinearities in Joints of a Wing Structure. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03006). ISSN 2261-236X

M. S. M., Sani and N. A., Nazri and S. N., Zahari and N. A. Z., Abdullah and G., Priyandoko (2016) Dynamic Study of Bicycle Frame Structure. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-8., 160 (012009). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and N. A. Z., Abdullah and Siti Norazila, Zahari and Siregar, J. P. and M. M., Rahman (2016) Finite Element Model Updating of Natural Fibre Reinforced Composite Structure in Structural Dynamics. In: MATEC Web of Conferences: International Conference on Structural Nonlinear Dynamics and Diagnosis (CSNDD 2016) , 23–25 May 2016 , Marrakech, Morocco. pp. 1-4., 83 (03007). ISSN 2261-236X

M. S. M., Sani and Siti Norazila, Zahari and N. I. M., Azmi and S., Musa (2016) Secret to Success: Securing Petronas Vendor Development Program (VDP). In: Proceedings of International Conference on Knowledge Transfer (ICKT'15) , 1-3 December 2015 , Putrajaya Marriott Hotel, Malaysia. pp. 113-120.. ISBN 978-967-394-255-8

M. Y., Isafiq and Z., Shayfull and S. M., Nasir and Mohd Rashidi, Maarof and M., Fathullah and N. Z., Noriman (2016) Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM). In: 2nd International Conference on Green Design and Manufacture (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78.

M. Z., Sharif (2016) Performance analysis of SiO₂PAG nanolubricant in automotive air conditioning system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/PAG Nanolubricant for Application in Automotive Air Conditioning System. International Journal of Refrigeration, 70. pp. 93-102. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and Mohamad Redhwan, Abd. Aziz (2016) Effect of Nanolubricant on Evaporator and Condenser Pressure of Automotive Air Conditioning System. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 302-308..

Mahendran, Samykano and Md. Mustafizur, Rahman and Kumaran, Kadirgama and Jose, Rajan and Devarajan, Ramasamy and Muhamad, Mat Noor and Nurul Akmal, Che Lah and Pooria, Pasbakhsh (2016) Synthesis and characterization of one dimensional modified cobalt Nanowires for nanoscale mechanical. , [Research Book Profile: Research Report] (Unpublished)

Mahmood, Anwar and S., Izman and Mohammed Rafiq, Abdul Kadir and E. M., Nazim and Aini, Abdul Kadir and M., Konneh and Mas Ayu, Hassan (2016) Elemental Diffusion Behaviour of Biomedical Grade Titanium Alloy through Thermal Oxidation. Applied Mechanics and Materials, 819. pp. 591-595. ISSN 1662-7482. (Published)

Mahmud Jamil, Muhammad and Isa Adamu, Muhammad and Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Muhammad Yazid and R., Mamat and G., Najafi (2016) The Use of Nanofluids for Enhancing the Thermal Performance of Stationary Solar Collectors: A Review. Renewable and Sustainable Energy Reviews, 63. pp. 226-236. ISSN 1364-0321. (Published)

Masitah, Jusop (2016) Multi-objective optimisation of assembly line balancing type-e problem with resource constraints. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimisation of Assembly Line Balancing Type-E with Resource Constraints using NSGA-II. Key Engineering Materials, 701. pp. 195-199. ISSN 1662-9795. (Published)

Masitah, Jusop and M. F. F., Ab Rashid (2016) Optimization of Assembly Line Balancing with Resource Constraint using NSGA-II: A Case Study. International Journal of Applied Engineering Research (IJAER), 12 (7). pp. 1421-1426. ISSN 0973-4562 (print); 1087-1090 (online). (Unpublished) (Unpublished)

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Tezara, C. (2016) Modification of Pineapple Leaf Fibre to Reinforce Polylactic Acid Composite with Improved Mechanical Properties. In: International Symposium on Advanced Polymeric Materials (ISAPM 2016) , 16-19 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. .

Mattei, G. and S. N., Aqida (2016) Optical Properties of Surface Layers Enhanced Raman Scattering. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-11. ISBN 978-0-12-803581-8

Mofijur, M. and Rasul, Md Golam and Hyde, J. and Azad, A. K. and R., Mamat and Bhuiya, M. M. K. (2016) Role of Biofuel and Their Binary (Diesel–Biodiesel) and Ternary (Ethanol–Biodiesel–Diesel) Blends on Internal Combustion Engines Emission Reduction. Renewable and Sustainable Energy Reviews, 53. pp. 265-278. ISSN 1364-0321. (Published)

Mohamad Heerwan, Peeie and Ogino, Hirohiko and Oshinoya, Yasuo (2016) Skid Control of a Small Electric Vehicle with Two In-Wheel Motors: Simulation Model of ABS and Regenerative Brake Control. International Journal of Crashworthiness, 21 (5). pp. 396-406. ISSN 1358-8265. (Published)

Mohamed Reza Zalani, Mohamed Suffian and S. N., Aqida and Izwan, Ismail (2016) Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface. Applied Physics A: Materials Science and Processing, 122 (611). pp. 122-611. ISSN 09478396. (Published)

Mohammed, Ausama A. and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physico-chemical Study of Eco-friendly Sugar Palm Fiber Thermoplastic Polyurethane Composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ausama Al-sarraf and Bachtiar, Dandi and Siregar, J. P. and M. R. M., Rejab and Syed Farhan, Hasany (2016) Physicochemical study of eco-friendly sugar palm fiber thermoplastic polyurethane composites. BioResources, 11 (4). pp. 9438-9454. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Mohammed, Ghusoon R. and M., Ishak and S. N., Aqida and Hassan, A. Abdulhadi (2016) The Effect of Fiber Laser Parameters on Microhardness and Microstructure of Duplex Stainless Steel. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (01024). ISSN 2261-236X

Mohammed, K. Mohammed and M. Kh., Abdolbaqi and Ibrahim, Thamir K. and R., Mamat and Awad, Omar I. (2016) Experimental and Numerical investigation of Heat transfer enhancement using Al2O3-Ethylene Glycol/Water Nanofluids in Straight Channel. In: UTP-UMP Symposium on Energy Systems 2016 , 22 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 1-9.. (Unpublished)

Mohammed M., Hassan and M., Ishak and M. R. M., Rejab (2016) Influence of Machine Variables and Tool Profile on the Tensile Strength of Dissimilar AA7075-AA6061 Friction Stir Welds. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Mohd Adnin, Hamidi (2016) Ignition mechanism analyzed through transient species measurements and its correlation with O-D and 3-D simulations for PRF and toluene n-heptane mixture. Masters thesis, Toyama University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Akramin, Mohd Romlay (2016) Analysis of fatigue surface crack using the probabilistic s-version finite element model. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid (2016) Contribution to multi-physical studies of small synchronous-reluctance machine for automotive equipment. PhD thesis, Université de Technologie de Compiègne (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid and Ospina, Alejandro and Benkara, Khadija El Kadri and Lanfranchi, Vincent (2016) A Thermal Study on Small Synchronous Reluctance Machine in Automotive Cycle. In: IEEE 25th International Symposium on Industrial Electronics (ISIE 2016) , 8-10 June 2016 , Santa Clara, CA, USA. pp. 1-7.. (Unpublished)

Mohd Fadhlan, Mohd Yusof and C. K. E., Nizwan and S. A., Ong and M. Q. M., Ridzuan (2016) Clustering of Frequency Spectrum from Different Bearing Fault using Principle Component Analysis. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Mohd Fadhlan, Mohd Yusof and M. A., Kamaruzaman and M., Zubair and M., Ishak (2016) Detection Of Defects On Weld Bead Through The Wavelet Analysis Of The Acquired Arc Sound Signal. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). pp. 2031-2042. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Fadhlan, Mohd Yusof and Muhammad Aizat, Kamaruzaman and M., Ishak and M. F., Ghazali (2016) Porosity Detection by Analyzing arc Sound Signal Acquired During the Welding Process of Gas Pipeline Steel. The International Journal of Advanced Manufacturing Technology. pp. 1-10. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Mohd Faizul Farhan, Ahmad Hamidi and Wan Sharuzi, Wan Harun and Faiz, Ahmad and Abu Bakar, Sulong (2016) Effect of Binders on Physical and Mechanical Properties of Stainless Steel 316L Alloy Fabricated by Metal Injection Moulding Process. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 85-88..

Mohd Haslizam, Abdullah and Mohd Hafizu, Zakaria and Muhamad Sollehudin, Ibrahim and Ahmad Damanhuri, Mohamad Yussof and S. A., Che Ghani (2016) Ultraxtor - Low Resources High Yield Benchtop Agarwood Essential Oil Extractor. In: Proceeding of International Competition and Exhibition on Computing Innovation 2016 , 6-8 December 2016 , University Sports Complex, Universiti Malaysia Pahang. pp. 138-144.. ISBN 978-967-2054-04-7

Mohd Hazwan, Yusof and Katanoda, Hiroshi (2016) Mixing Temperature Measurement of Swirl Cold Flow Exiting Cold Exit of Vortex Tube. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-5., 38 (01006). ISSN 2261-236X

Mohd Hazwan, Yusof and Muhammad Fadhli, Suhaimi and Mohd Hilmi, Mohd Aris and Syed Mohammad, Akhtar (2016) Numerical Study on the Effect of Geometrical Parameters on the Performance of Vortex Tube Cooling Device Using Simflow. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016) , 6-8 October 2016 , Universiti Teknologi Malaysia. pp. 1-8..

Mohd Razali, Hanipah and Zamri, Mohamed (2016) Numerical Investigations on the Port Flow Field of a Two-Stroke Poppet Valve Engine. In: 2nd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2016) , 2-3 August 2016 , MAI, Cyberjaya, Malaysia. pp. 1-11.. (Unpublished)

Mohd Yazid, Abu (2016) Integration of mahalanobis-taguchi system and activity based costing in decision making for remanufacturing. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Magffierah, Razali and M. F. F., Ab Rashid and Muhammad Razif, Abdullah Make (2016) Mathematical Modelling of Mixed-Model Assembly Line Balancing Problem with Resources Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-10., 012002 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Zuhairi, Sulaiman and Matsuo, Daisuke and Enoki, Koji and Okawa, Tomio (2016) Systematic Measurements of Heat Transfer Characteristics in Saturated Pool Boiling of Water-Based Nanofluids. International Journal of Heat and Mass Transfer, 102. pp. 264-276. ISSN 0017-9310. (Published)

Muhammad Naqiuddin, Mat Salleh and M., Ishak and F. R. M., Romlay and Aiman, Mohd Halil (2016) A Study on Bead-on-Plate Welding of AA7075 using Low Power Fiber Laser. Journal of Mechanical Engineering and Sciences (JMES) , 10 (2). 2065 -2075. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Muhammad Noor Afiq Witri, Muhammad Yazid and Nor Azwadi, Che Sidik and R., Mamat and G., Najafi (2016) A Review of the Impact of Preparation on Stability of Carbon Nanotube Nanofluids. International Communications in Heat and Mass Transfer, 78. pp. 253-263. ISSN 0735-1933. (Published)

Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid and Muhamad Magffierah, Razali (2016) Modelling of Two-sided Assembly Line Balancing Problem with Resource Constraints. In: IOP Conference Series: Materials Science and Engineering, International Engineering Research and Innovation Symposium (IRIS) , 24-25 November 2016 , Melaka, Malaysia. pp. 1-9., 160 (012005). ISSN 1757-8981 (Print), 1757-899X (Online)

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Effect on Mechanical Properties of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-8., 78 (01081). ISSN 2261-236X

Muzafar, A. K. and Rashidi, M. M. and Mahadzir, Ishak and Shayfull, Z. (2016) Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01079). ISSN 2261-236X

N. F., Yah and M. S., Idris and A. N., Oumer (2016) Numerical Investigation on Effect of Immersed Blade Depth on the Performance of Undershot Water Turbines. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00035). ISSN 2261-236X

N. H., Zakaria and N. M. Zuki, N. M. and A. N. M., Rose and M. F. F., Ab Rashid (2016) Lean Manufacturing Implementation in Small and Medium Industry. In: 20th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES2016) , 5-7 September 2016 , York, United Kingdom. . (Unpublished)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and Ummu Kulthum, Jamaludin (2016) Trial Protocol Analysis of Nursing Workload Intensity within ICU. In: International Conference for Innovation in Biomedical Engineering and Life Sciences. IFMBE Proceedings, 56 . Springer, Singapore, pp. 294-297. ISBN 978-981-10-0265-6 (Print); 978-981-10-0266-3 (Online)

N. S. M., Noor and Z., Ghazalli and R., Mamat and K., Kadirgama and M. S. M., Sani and Z., Ahmad and Nasrul Hadi, Johari (2016) The enhancement of driver seat comfort for small size car: a preliminary study. Malaysian Journal of Public Health Medicine, 16 (Suppl. 1). pp. 108-114. ISSN 1675-0306. (Published)

N. T., Rao and A. N., Oumer and Ummu Kulthum, Jamaludin and A. Y., Adam (2016) Numerical Analysis of Flow and Heat Transfer Characteristics of CO2 at Vapour and Supercritical Phases in Micro-Channels. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00011). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. (2016) Finite Element Analysis of Trapezoidal Corrugated-Core for Sandwich Structure. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

N. Z. M., Zaid and M. R. M., Rejab and A. F., Jusoh and Bachtiar, Dandi and Siregar, J. P. and Zhang, Dian Ping (2016) Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture ((IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-9., 78 (01041). ISSN 2261-236X

N. Z. M., Zaid and M. R. M., Rejab and N. A. N., Mohamed (2016) Sandwich Structure Based On Corrugated-Core: A Review. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00029). ISSN 2261-236X

Najafi, G. and Ghobadian, B. and Moosavian, A. and Yusaf, T. and R., Mamat and M., Kettner and Azmi, W. H. (2016) SVM and ANFIS for Prediction of Performance and Exhaust Emissions of a SI Engine with Gasoline–Ethanol Blended Fuels. Applied Thermal Engineering, 95. pp. 186-203. ISSN 1359-4311. (Published)

Najiha, M. S. and M. M., Rahman (2016) Experimental Investigation of Flank Wear in end Milling of Aluminum Alloy with Water-Based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. The International Journal of Advanced Manufacturing Technology. pp. 1-11. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2016) Environmental Impacts and Hazards Associated With Metal Working Fluids and Recent Advances in the Sustainable Systems: A Review. Renewable and Sustainable Energy Reviews, 60. pp. 1008-1031. ISSN 1364-0321. (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6. Journal of Cleaner Production, 135. pp. 1623-1636. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Najihah, S. N. and Shayfull, Z. and Nasir, S. M. and Mohd Sazli, Saad and Rashidi, M. M. and Fathullah, M. and Noriman, N. Z. (2016) Analysis of Shrinkage on Thick Plate Part using Genetic Algorithm. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-12., 78 (01083). ISSN 2261-236X

Nandiyanto, Asep Bayu Dani and Munawaroh, Heli Siti Halimatul and Kurniawan, Tedi and Mudzakir, Ahmad (2016) Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties. Indonesian Journal of Chemistry, 16 (2). pp. 124-129. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Nazani, Nazri and Shahrani, Anuar and F., Basrawi and Ahmmad Shukrie, Md Yudin and Siti, Aishah (2016) Estimation of Energy Potential and Power Generation from Tidal Basin in Coastal Area of Malaysia. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-8., 38. ISSN 2261-236X

Ng, Noveen Nico Alexandra and A. A. A., Ahmad Shamsuddin and M. M., Hasin and N. S., Mazlan and M. L., Mohd Isnin (2016) Design and Development of Ion Probe Testing on Four Stroke Engine Model. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

Noor Sarbani, Wan Muhammad and Shariman, Mustafa and Syed Radzi, Rahamaddulla and S. A., Che Ghani and Anwaruddin, Hisyam (2016) Technical and Economic Feasibility Study of Coconut Shell Charcoal Production as precursor to Activated Carbon in East Coast Malaysia. In: Advances in Business Research International Conference (ABRIC2016) , 16-17 November 2016 , Langkawi, Malaysia. pp. 1-11.. (Unpublished)

Nor Azwadi, Che Sidik and Isa Muhammad, Adamu and Muhammad Mahmud, Jamil and Kefayati, G. H. R. and R., Mamat and G., Najafi (2016) Recent Progress on Hybrid Nanofluids In Heat Transfer Applications: A Comprehensive Review. International Communications in Heat and Mass Transfer, 78. pp. 68-79. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and Syahrullail, Samion and Mohamad Nor, Musa and R., Mamat (2016) Latest Development on Computational Approaches for Nanofluid Flow Modeling: Navier–Stokes Based Multiphase Models. International Communications in Heat and Mass Transfer, 74. pp. 114-124. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and Syahrullail, Samion and Mohamad Nor, Musa and Mahmud Jamil, Muhammad and Adamu Isa, Muhammad and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2016) The Significant Effect of Turbulence Characteristics on Heat Transfer Enhancement Using Nanofluids: A Comprehensive Review. International Communications in Heat and Mass Transfer, 72. pp. 39-47. ISSN 0735-1933. (Published)

Norfadzilah, Jusoh (2016) Analysis of the effect and responsiveness of physiology factors on thermal comfort in an air-conditioned environment. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu Bakar, Rosli).

Norhafzan, Bariman and S. N., Aqida and Chikarakara, E. and Brabazon, D. (2016) Surface modification of AISI H13 tool steel by laser cladding with NiTi powder. Applied Physics A, 122 (384). pp. 1-6. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

Norhaida, Ab. Razak and Davies, C. M. and Nikbin, K. M. (2016) Creep-fatigue crack growth behaviour of P91 steels. In: Procedia Structural Integrity; 21st European Conference on Fracture, ECF21 , 20 - 24 June 2016 , Catania, Italy. pp. 855-862., 2. ISSN 2452-3216

Norhidayah, M. S. and N. M. Zuki, N. M. and Muhamad Arifpin, Mansor and Ahmad Rasdan, Ismail (2016) RULA: Postural Loading Assessment Tools for Malaysia Mining Industry. In: Proceeding of 3rd International Conference on Ergonomics & !st International Conference on Industrial Engineering (ICE & ICIE 2015) , 19-20 August 2015 , Kuala Lumpur, Malaysia. pp. 1-8..

Normy Norfiza, A. Razak and Nurhamim, Ahamad and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin and Azrina, M. Ralib (2016) Feasibility Of An Intensive Control Insulin-Nutrition Glucose Model ‘Icing’ With Malaysian Critically-Ill Patient. International Journal of Pharmacy and Pharmaceutical Sciences, 8 (Spp 2). pp. 40-42. ISSN 0975-1491. (Published)

Norsharimie, Adam and Mohd, Aiman and Wan Mohd, Nafis and Addie Irawan, Hashim and Mohamad, Muaz and Mohamad, Hafiz and A. R., Razali and Sheikh Norhasmadi, Sheikh Ali (2016) Omnidirectional Configuration and Control Approach on Mini Heavy Loaded Forklift Autonomous Guided Vehicle. In: MATEC Web of Conferences: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-11., 90 (01077). ISSN 2261-236X

Nour, A. H. and R. M., Yunus and Azhari, H. Nour and Abdul Adam, Abdullah (2016) The Potential of a Water-in-Diesel Emulsion for Increased Engine Performance and as an Environmentally Friendly Fuel. In: MATEC Web of Conferences: The 3rd International Conference on Manufacturing and Industrial Technologies , 16-18 April 2016 , Bangkok, Thailand. pp. 1-5., 70 (01003). ISSN 2261-236X

Nur Ashikin, Usri (2016) Investigation of forced convection heat transfer for Al2O3 nanofluids in different base mixture. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fakhriah, Mohd Noordin and M., Ishak and L. H., Shah (2016) Prediction and Optimization of Process Parameters on Metal Inert Gas of Dissimilar Aluminium Alloy AA6061-T6 and AA7075-T6 using Response Surface Method Analysis. Key Engineering Materials, 701. pp. 143-147. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nur Syawanie, Manam and Wan Sharuzi, Wan Harun and Mohd Halim Irwan, Ibrahim (2016) Experimental Study of Solvent Debinding on Water Soluble PEG Behavior for Water Atomised SS 316L Compact. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 187-192..

Nur Zalikha, Khalil and Vajpai, Sanjay Kumar and Ota, Mie and Ameyama, Kei (2016) Application of Al-Si Semi-Solid Reaction for Fabricating Harmonic Structured Al Based Alloy. Materials Transactions, 57 (9). pp. 1433-1439. ISSN 1345-9678. (Published)

Nurizzatul Athika, Rahmat and Hagishima, Aya and Ikegaya, Naoki and Tanimoto, Jun (2016) An Experimental Study on Aerodynamic Interaction Between a Boundary Layer Generated by a Smooth And Rough Wall and a Wake Behind a Spire. Engineering Sciences Reports, 37 (2). pp. 19-26. ISSN 0388-1717. (Published)

Nurul Akmal, Che Lah and Samykano, Mahendran and Trigueros, Sonia (2016) Nanoscale Metal Particles as Nanocarriers in Targeted Drug Delivery System. Journal of Nanomedicine Research, 4 (2). pp. 1-6. ISSN 2377-4282. (Published)

Nurul Fatiehah, Adnan (2016) Leak detection in gas pipeline based on time-frequency analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Fairusham, Ghazali).

Nurul Hidayah, Othman and N., Udin and M., Ishak and L. H., Shah (2016) Effect of Taper Pin Ratio on Microstructure and Mechanical Property of Friction Stir Welded AZ31 Magnesium Alloy. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (5). pp. 586-589. ISSN 1307-6892. (Published)

Nurul Hidayah, Othman and Norsyahfiana, Abdul Razak and L. H., Shah and M., Ishak (2016) Effect of Taper Pin Ratio on AA7075 Aluminium Alloy Friction Stir Welding. Key Engineering Materials, 701. pp. 154-158. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Nurul Suraya, Azahari and Ummu Kulthum, Jamaludin and N. M. M., Ammar (2016) Investigation on the Effect of Drive Train System for Archimedes Screw Turbine. In: The 4th International Conference on Engineering and ICT (ICEI 2016) , 4-6 April 2016 , Melaka, Malaysia. pp. 1-5..

Obed M., Ali and R., Mamat and H. H., Masjuki and Abdul Adam, Abdullah (2016) Analysis of Blended Fuel Properties and Cycle-To-Cycle Variation In A Diesel Engine With A Diethyl Ether Additive. Energy Conversion and Management, 108. pp. 511-519. ISSN 0196-8904. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2016) Commercial and Synthesized Additives for Biodiesel Fuel. A Review. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3650-3654. ISSN 1819-6608. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2016) Investigation of Blended Palm Biodiesel-Diesel Fuel Properties With Oxygenated Additive. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5290-5293. ISSN 1819-6608. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah and Fitri, Khoerunnisa and Ratnaningsih, Eko Sardjon (2016) Effects of Different Chemical Additives on Biodiesel Fuel Properties and Engine Performance. A Comparison Review. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38 (03002). ISSN 2261-236X

Ping, Jack Soh and Fatin Nabilah, Giman and Mohd Faizal, Jamlos and H., Lago and Azremi Abdullah, Al-Hadi (2016) A C-Slotted Dual Band Textile Antenna for WBAN Applications. In: URSI Asia-Pacific Radio Science Conference (URSI AP-RASC) , 21-25 August 2016 , Seoul, Korea. pp. 1621-1624.. ISBN 978-1-4673-8801-6

R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and T. Z. S., Ali (2016) Study on Effect of Human Metabolic Rate on Skin Temperature in Office Environment. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

R. A., Bakar and Norfadzilah, Jusoh and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Musthafah, Mohd Tahir (2016) Experimental Study on Skin Temperature of People in Office Activities at Different Air Temperatures. In: Engineering Technology International Conference 2016 , 4-5 August 2016 , Ho Chi Minh City, Vietnam. . (Unpublished)

Rahil Izzati, Mohd Asri and W. S., Wan Harun and Mas Ayu, Hassan and S. A., Che Ghani and Z., Buyong (2016) A Review of Hydroxyapatite-Based Coating Techniques: Sol–Gel and Electrochemical Depositions on Biocompatible Metals. Journal of the Mechanical Behavior of Biomedical Materials, 57. pp. 95-108. ISSN 1751-6161. (Published)

Rahil Izzati, Mohd Asri and Wan Sharuzi, Wan Harun and Asmara, Y. P. (2016) Effect of Acid Pickling on Microstructure and Surface Roughness of 316L Stainless Steel. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 142-146..

Rao, N. Thiwaan and A. N., Oumer and Ummu Kulthum, Jamaludin (2016) State-of-the-art on Flow and Heat Transfer Characteristics of Supercritical CO2 in Various Channels. The Journal of Supercritical Fluids, 116. pp. 132-147. ISSN 0896-8446. (Published)

S. A., Che Ghani and Abdul Malek, Nor Mohd Syamsi and W. S., Wan Harun and Adnan, Zahrul and M. F. F., Ab Rashid and Ramli, Mohd Hazlen and Omar, Asnawi (2016) Finite Element Analysis of Porous Medical Grade Cobalt Chromium Alloy Structures Produced by Selective Laser Melting. Advanced Materials Research, 1133. pp. 113-118. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

S. A., Che Ghani and Mohd Hafizu, Zakaria and W. S., Wan Harun and Zaulkafilai, Z. (2016) Dimensional Accuracy Of Internal Cooling Channel Made By Selective Laser Melting (SLM) and Direct Metal Laser Sintering (DMLS) Processes In Fabrication Of Internally Cooled Cutting Tools. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8., 90 (8). ISSN 2261-236X

S. K., Lim and Azmi, W. H. and A. R., Yusoff (2016) Investigation of Thermal Conductivity and Viscosity of Al2O3/Water-Ethylene Gylcol Mixture Nanocoolant for Cooling Channel of Hot-press Forming Die Application. International Communications in Heat and Mass Transfer, 78. pp. 182-189. ISSN 0735-1933. (Published)

S. M., Azlan and Z., Shayfull and S. M., Nasir and Mohd Sazli, Saad and Mohd Rashidi, Maarof and M., Fathullah (2016) Analysis of Strength on Thick Plate Part using Genetic Algorithm Optimisation Method. In: MATEC Web of Conferences: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016) , 1-2 May 2016 , Phuket, Thailand. pp. 1-11., 78 (01085). ISSN 2261-236X

Sakinah, Muhamad Hisham and Amirruddin, Abdul Kadir and K., Kadirgama and D., Ramasamy and M. M., Rahman and M. M., Noor (2016) The Application of Response Surface Methodology in the Investigation of the Tribological Behavior of Palm Cooking Oil Blended in Engine Oil. Advances in Tribology, 2016 (654590). pp. 1-11. ISSN 1687-5915. (Published)

Sakinah, Muhamad Hisham and K., Kadirgama and H. M., Asnida and D., Ramasamy and M. M., Noor and M. M., Rahman (2016) Optimization On Wear Performance of Waste Cooking Oil As Engine Additive Using RSM (First Order Model). In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. . (Unpublished)

Salwani, Mohd Salleh and Aidy, Ali and Sahari, B. B. and Nuraini, A. A. (2016) Effect of automotive side member materials on the head injury criteria (HIC) and chest severity index (CSI) of adult passenger. International Journal of Engineering and Technologies, 7. pp. 47-59. ISSN 2297-623X. (Published)

Salwani, Mohd Salleh and Barkawi, Sahari and Aidy, Ali and Mas Ayu, Hassan and Rosdi, Daud (2016) Correlations Between Axial and Oblique Loaded Column. In: Conference On Design, Materials and Manufacturing , 25-27 March 2016 , Kuala Lumpur. . (Unpublished)

Salwani, Mohd Salleh and Mohammad Raffik, Khiyon (2016) Effect of Heat-Treatment on the Hardness and Mechanical Properties of Boron Alloyed Steel. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-6..

Selvamani, Sathish Kumar and Nuurul Syahierah, Othman and M. Z. A., Zulkifle and Keresnan, Khaliswaran (2016) Design And Development Of Library Anti-Theft System. Mechanical System Design. pp. 1-15. (Published)

Singh, Salvinder and Abdullah, Shahrum and Nik Abdullah, Nik Mohamed (2016) Discretized Markov Chain in Damage Assessment Using Rainflow Cycle with Effects of Mean Stress On An Automobile Crankshaft. Journal of Mechanical Science and Technology, 30 (8). pp. 3539-3551. (Published)

Siregar, J. P. and Farah Ayuni, Fauzi and Tezara, C. and Lim, H.Y. and M.H., Yazdi and Moey, L.K. and Lim, J.W. (2016) Factors that affect the mechanical properties of kenaf fiber reinforced polymer: A review. Journal of Mechanical Engineering and Sciences (JMES), 10 (2). pp. 2159-2175. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Norazila, Zahari and A. A. R, Zakaria and M. S. M., Sani and Izzuddin, Zaman (2016) A Review on Model Updating of Joint Structure for Dynamic Analysis Purpose. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6., 74 (00023). ISSN 2261-236X

Siti Norazila, Zahari and M. S. M., Sani and Nurulakmar, Abu Husain and Ishak, M. and Izzuddin, Zaman (2016) Dynamic Analysis of Friction Stir Welding Joints in Dissimilar Material Plate Structure. Jurnal Teknologi (Sciences and Engineering), 78 (6-9). pp. 57-65. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Siti Rabiatull Aisha, Idris and M., Ishak and S. N., Aqida and Siti Haryani, Tomadi and Mohd Rashidi, Maarof (2016) BMM3611: manufacturing processes laboratory. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-0691-97-8

Siti Rabiatull Aisha, Idris and Nadhrah, Murad and M., Ishak (2016) Effects of Sintering Temperatures on Microstructures and Mechanical Properties of Sn4.0Ag0.5Cu1.0Ni Solder Alloy. In: 2016 IEEE 37th International Electronics Manufacturing Technology (IEMT) & 18th Electronics Materials and Packaging (EMAP) Conference , 20-22 September 2016 , Penang, Malaysia. pp. 1-7..

Siti Rabiatull Aisha, Idris and Noor, Farihan and Hardinnawirda, Kahar (2016) Effect of Flux onto Intermetallic Compound Formation and Growth. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-3., 74 (00034). ISSN 2261-236X

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Saliza Azlina, Osman (2016) The Effectiveness of Bismuth Addition to Retard the Intermetallic Compound Formation. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (1). pp. 107-111. ISSN 1307-6892. (Published)

Siti Rabiatull Aisha, Idris and Siti, Zuleikha and Zetty Akhtar, Abd Malek (2016) Wettability Study of Lead Free Solder Paste and its Effect Towards Multiple Reflow. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00038). ISSN 2261-236X

Siti Rohaida, Mohamed and S. A., Che Ghani and W. S., Wan Harun and Nor Aida Zuraimi, Md Noar (2016) Evaluations of Co-Cr-Mo meta-biomaterial manufactured by selective laser melting for orthopaedic application. In: Symposium & Exhibition on Additive Manufacturing , 26 July 2016 , The Light Hotel, Seberang Jaya, Penang. pp. 1-5.. (Unpublished)

Siti Zubaidah, Aziz and Mohd Faizal, Jamlos (2016) Compact Super Wideband Patch Antenna Design Using Diversities of Reactive Loaded Technique. Microwave and Optical Technology Letters, 58 (12). pp. 2811-2814. (Published)

Sugumaran, Sathish and Mohd Faizal, Jamlos and Mohd Noor, Ahmad and Bellan, Chandar Shekar and Sivaraj, Manoj (2016) Thickness and Annealing Effects on Thermally Evaporated InZnO Thin Films for Gas Sensors and Blue, Green and Yellow Emissive Optical Devices. Optical Materials, 58. pp. 342-352. ISSN 0925-3467. (Published)

Suleiman, Akilu and K. V., Sharma and Baheta, Aklilu Tesfamichael and R., Mamat (2016) A Review of Thermophysical Properties of Water Based Composite Nanofluids. Renewable and Sustainable Energy Reviews, 66. pp. 654-678. ISSN 1364-0321. (Published)

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail (2016) Surveying Users' Perception of Academic Library Services Quality: A Case Study in Universiti Malaysia Pahang (UMP) Library. The Journal of Academic Librarianship, 42 (1). pp. 38-43. ISSN 0099-1333. (Published)

Syafiq, Zulkifli and O., Fahmi and Awad, Omar I. and Abdul Adam, Abdullah (2016) The Study of Stability and Combustion Characteristics O Water In Diesel Emulsion Fuel. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10.. (Unpublished)

Syafiq, Zulkifli and O., Fahmi and N., Syuhaida and Abdul Adam, Abdullah (2016) Diesel Engine Performance and Exhaust Emission Analysis Using Diesel-Organic Germanium Fuel Blend. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

Taguchi, S. and Iwata, T. and Abe, H. and Doi, Y. and S. N., Aqida (2016) Poly(hydroxyalkanoate)s. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-28. ISBN 978-0-12-803581-8

Tanti, Ali and R. A., Bakar and Gan, Leong Ming (2016) Investigation of Passenger Car Using Macpherson Strut for Front Suspension System PT.1: Vehicle Behavior Variation of Time Response. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-8.. (Unpublished)

Thamir K., Ibrahim and M. M., Rahman and M. K., Mohamed and F., Basrawi (2016) Statistical Analysis and Optimum Performanceof the Gas Turbine Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Thamir K., Ibrahim and M. M., Rahman and Obed M., Ali and F., Basrawi and R., Mamat (2016) Optimum Performance Enhancing Strategies of the Gas Turbine Based on The Effective Temperatures. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-9., 38 (01002). ISSN 2261-236X

Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Fatimah, Dzaharudin and Azrina, M. Ralib and Mohd Basri, Mat Nor (2016) Mathematical Modelling of Glucose-Insulin System Behaviour in Hospital Tengku Ampuan Afzan Intensive Care Unit Patients. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10899-10903. ISSN 1819-6608. (Published)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and K. S., Lim (2016) Real-time Monitoring System of Composite Aircraft Wings Utilizing Fibre Bragg Grating Sensor. In: IOP Conference Series: Materials Science and Engineering, AEROTECH VI - Innovation in Aerospace Engineering and Technology , 8–9 November 2016 , Kuala Lumpur, Malaysia. pp. 1-9., 152 (012024). ISSN 1757-8981 (Print), 1757-899X (Online)

Vorathin, E. and Z. M., Hafizi and S. A., Che Ghani and Kian, Sheng Lim (2016) The Use of Real-Time Monitoring System Utilizing Single Fibre Bragg Grating Sensor for Composite Plate under Static Loading. In: International Conference on Environmental Technology and Management (ICETM 2016) , 19-20 August 2016 , Kuala Lumpur, Malaysia. pp. 1-13.. (Unpublished)

W. A. W., Muhamad and R., Ngah and M. F., Jamlos and P. J., Soh and M. A., Jamlos and H., Lago (2016) Antenna Array Bandwidth Enhancement using Polymeric Nanocomposite Substrate. Applied Physics A, 122 (426). pp. 1-9. ISSN 0947-8396 (Print) 1432-0630 (Online). (Published)

W. H., Azmi and R., Mamat and K. V., Sharma and G., Najafi and M. S., Mohamad (2016) The Enhancement of Effective Thermal Conductivity and Effective Dynamic Viscosity of Nanofluids – A Review. Renewable and Sustainable Energy Reviews, 53. pp. 1046-1058. ISSN 1364-0321. (Published)

Wafiuddin, Md Ghazali and Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Nurazima, Ismail and Azizul Helmi, Sofian (2016) Design and Analysis of Tooth Impact Test Rig for Spur Gear. In: IOP Conference Series: Materials Science and Engineering: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (iMEC-APCOMS 2015) , 12–14 November 2015 , Kuala Lumpur, Malaysia. pp. 1-12., 114 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Wan Sofian, Wan Hamat and M. F., Ghazali and Priyandoko, Gigih (2016) Ultrasonic Guided Wave Method For Crack Detection In Buried Plastic Pipe. In: MATEC Web of Conferences: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5., 74 (00012). ISSN 2261-236X

Widodo Budi, Santoso (2016) Mixture formation and combustion characteristics of diesel-hydrogen dual fuel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Wintermantel, E. and Mayer, J. and Goehring, T. N. and S. N., Aqida (2016) Composites for Biomedical Applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier, Oxford, pp. 1-8. ISBN 978-0-12-803581-8

Yap, Wee Leong (2016) Development of ironless coreless axial flux permanent magnet generator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Preliminary Studies on Number of Coil Turns per Phase and Distance between the Magnet Pairs for AFPM Ironless Electricity Generator. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems 2015 (SES 2015) , 7 October 2015 , Universiti Teknologi Petronas (UTP), Bandar Seri Iskandar, Perak. pp. 1-7., 38. ISSN 2261-236X

Yap, Wee Leong and A. R., Razali and Priyandoko, Gigih and Nazrul Idzham, Kasim (2016) Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles. MATEC Web of Conferences, 38 (02002). pp. 1-11. ISSN 2261-236X. (Published)

Yasir , Hassan Ali and Salah, M. Ali and Roslan, Abd Rahman and Raja Ishak, Raja Hamzah (2016) Acoustic Emission and Artificial Intelligent Methods in Condition Monitoring of Rotating Machine – A Review. In: National Conference For Postgraduate Research (NCON-PGR 2016) , 24-25 September 2016 , Universiti Malaysia Pahang, Pekan. pp. 212-219..

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and K. V., Sharma (2016) Wear Analysis When Machining AISI 304 with Ethylene Glycol/TIO2 Nanoparticle-based Coolant. The International Journal of Advanced Manufacturing Technology, 82 (1). pp. 327-340. ISSN 0268-3768 (Print), 1433-3015 (Online). (In Press / Online First) (In Press / Online First)

Yonghao, Leong and Farah, Alia and Kurniawan, Tedi (2016) High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition. Indonesian Journal of Science & Technology, 1 (2). pp. 232-237. ISSN 2527-8045. (Published)

Zahari, Taha and Mohd Hasnun Ariff, Hassan (2016) Parametric Analysis of the Influence of Elastomeric Foam on the Head Response During Soccer Heading Manoeuvre. Procedia Engineering, 147. pp. 139-144. ISSN 1877-7058. (Published)

Zahrul Adnan, Mat Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and Mohd Asnawi, Omar and Hazlen, Ramli (2016) Dimensional Accuracy Study of Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. Advanced Materials Research, 1133. pp. 280-284. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and A. R., Yusoff and M. M., Rahman (2016) Effect of Coolant Nozzle Sizes on Turning Aluminum Alloy AL319. Indian Journal of Science and Technology, 9 (9). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zainal Ariffin, Selamat and Nor Bahiyah, Baba and Mohd, Alias and Nornajmiah, Mohamad and A. R., Yusoff and M. M., Rahman (2016) Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter. Indian Journal of Science and Technology, 9 (9). pp. 1-4. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Zamri, Mohamed and Wang, Xu (2016) A Deterministic and Statistical Energy Analysis of Tyre Cavity Resonance Noise. Mechanical Systems and Signal Processing, 70-71. pp. 947-957. ISSN 0888-3270. (Published)

Zamri, Mohamed and Xu, Wang and Reza, Jazar (2016) Structural-Acoustic Coupling Study Of Tyre-Cavity Resonance. Journal of Vibration and Control, 22 (2). pp. 513-529. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Zamzuri, Hamedon and A. R., Yusoff and Azmir, Azhari and Abe, Yohei and Mori, Ken-ichiro (2016) Design of Hollow Section of High Strength Steel Sheets Join by Hemming Process for Energy Absorbtion Application. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3640-3643. ISSN 1819-6608. (Published)

Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar and Siti Rabiatull Aisha, Idris and M., Ishak (2016) Effect of Immersion Coating Deposition Time on Solder Joint Properties. Advanced Materials Research, 1133. pp. 361-365. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Zulkifli, Ahmad and Ponnusamy, Barath and Z., Ghazalli (2016) Finite Element Analysis Approach on 3D Modeling of Archery Bow Design. In: Conference Proceedings: The 4th Annual Conference on Engineering and Information Technology (ACEAIT 2016) , 29-31 March 2016 , Kyoto, Japan. pp. 413-418..

Zulkifli, Ahmad@Manap and Tan, Choon Mong (2016) Development of Portable Biofeedback Devices for Sport Applications. In: Proceedings of the 2nd International Colloquium on Sports Science, Exercise, Engineering and Technology 2015 (ICoSSEET 2015). Springer, Singapore, pp. 55-66. ISBN 978-981-287-690-4 (print); 978-981-287-691-1 (online)