Items where Division is "Faculty of Engineering Technology" and Year is 2013

A

A. R., Abd Aziz and M. B., Nishazini and Azlinna, Azizan (2013) Quality Improvement Culture in KPJ Seremban Specialist Hospital, Malaysia: The Impact of Total Quality Management. Asian Journal of Pharmaceutical and Health Sciences, 3 (3). pp. 774-778. ISSN 2231-234X. (Published)

Abushaiba, Ibrahim Ali (2013) Performance measurement information system and competitive capabilities in relation towards organizational performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: YUSERRIE, ZAINUDDIN).

Ahmad Rasdan, Ismail and Shashi Kumar, S A Karagaratnan and K., Kadirgama (2013) Thermal Comfort Findings: Scenario At Malaysian Automotive Industry. Thermal Science, 17 (2). pp. 387-396. (Published)

Akhwanzada, Salman A. and Razman, Mat Tahar (2013) Analyzing the Effect of Feed-in Tariff and Reserve Margin on Renewable Generation Capacity Expansion. In: Business Engineering and Industrial Applications Colloquium (BEIAC), 2013 IEEE , 7-9 April 2013 , Langkawi, Kedah. pp. 714-718.. (Published)

Ali, A. J. Adham and Ahmad Nazif, Noor Kamar and Abdullah, Ibrahim and Sorooshian, Shahryar (2013) Simulation Model and Genetic Algorithm to Assembly Line Balancing. International Journal of Technology Management, 2. pp. 63-72. ISSN 2289-2753. (Published)

Alkasasbeh, Hamzeh Taha and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2013) Effect of Radiation on Magnetohydrodynamic Free Convection Boundary Layer Flow on a Solid Sphere with Newtonian Heating. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013) , 3-4 December 2013 , Kuantan, Pahang. pp. 1-3.. (Published)

Andalib, Tarnima Warda (2013) Human Rights in Human Resources Management: A Comparison Study of Technology Industries between Bangladesh and Malaysia. In: 6th International Economics and Business Management Conference (IEBMC 2013) , 2-4 October 2013 , Kuantan, Pahang. pp. 1-17.. (Published)

Andalib, Tarnima Warda and Mohd Ridzuan, Darun and Azlinna, Azizan (2013) Frustration of Employees: Reasons, Dimensions and Resolving Techniques. In: Proceeding of the World Conference on Integration of Knowledge (WCIK 2013) , 25-26 November 2013 , Langkawi, Kedah. pp. 15-25.. (Published)

Azad, Othman (2013) Tahap pengetahuan, kefahaman, sikap dan amalan terhadap keselamatan di organisasi pendidikan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Ibrahim).

Azizi, Amir and Sorooshian, Shahryar (2013) Fuzzy Bases. World Applied Sciences Journal, 26 (10). pp. 1335-1339. ISSN 1818-4952. (Published)

C

Changkari, Ravindran (2013) A study on food quality dimensions of 3 in 1 instant packet drink. Faculty of Engineering Technology, Universiti Malaysia Pahang.

D

Daing Nasir, Ibrahim (2013) Advancing automotive agenda. New Straits Times, (15 Oc . p. 6.

Daing Nasir, Ibrahim (2013) Platform for internationalisation. New Straits Times, (15 Ju . p. 18.

Daing Nasir, Ibrahim (2013) Pursuing research collaboration potentials. New Straits Times, (15 No . p. 7.

Daing Nasir, Ibrahim (2013) Transformasi pengajian tinggi ubah landskap pendidikan negara. Berita Harian, (6 May . pp. 28-29.

Dina Diyana, Rastam Tan (2013) A system dynamic approach in human resource planning in oil and gas industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

F

Fadilah, Siali and Liu, Yao and Cheng, Jack Kie (2013) Inventory Management and Logistics Cost Reduction: A Case of a Malaysia Herbal Medicine Company. Technology and Investment, 4 (3). pp. 204-212. (Published)

Falatoonitoosi, Elham and Zulkiflle, Leman and Sorooshian, Shahryar (2013) Modeling for Green Supply Chain Evaluation. Mathematical Problems in Engineering, 2013 (201208). pp. 1-9. ISSN 1024-123X (print); 1563-5147 (online). (Published)

Fanurul Kemp, Abd Hakim (2013) Causes of delay in Malaysian IT projects. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Faturachman, Danny and Shariman, Mustafa (2013) Safety & Security Analysis of Sea Transportation in Indonesia. In: International Conference on Knowledge Management (ICKM 2013) , 14 - 15 Feb 2013 , Kuala Lumpur. pp. 527-529.. (Unpublished) (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Muslim, Muswar (2013) The Utilization of Solar Cell for Power Lighting Equipment on the Ferry. In: 6th International Engineering Conference (Encon): "Energy and Environment" 2013 , Hilton Kuching Hotel, Sarawak , 2-4 July 2013. . (Unpublished) (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Muswar, Muslim (2013) Indonesian’s Sea Transportation Accident Analysis. In: 2nd International Conference on Technology Management, Business and Entrepreneurship 2013 , 4-5 December 2013 , Melaka. pp. 1-8.. (Unpublished) (Unpublished)

Faturachman, Danny and Shariman, Mustafa and Octaviany, Fanny and Novita, Theresia D. (2013) Failure Mode and Effects Analysis of Diesel Engine for Ship Navigation System Improvement. In: The International Conference on Business Innovation, Entrepreneurship and Engineering 2013 (ICOBIEE 2013) , 6-8 December 2013 , Penang. pp. 1-13.. (Unpublished) (Unpublished)

Fong, Woan Shiuan (2013) Causes and effects of abuses in a feasibility study : a study in malaysian construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

G

G., Venkateswara Rao and Ramaraju, Ramgopal Varma (2013) Mechanical Postbuckling Behavior of Circular Plates Through Concept of Equivalent Radial Tensile Load. Journal of Structural Engineering, 40 (5). pp. 507-511. (Published)

H

Hiew, Hon Hoi (2013) A study of the effectiveness of recruitment in selecting qualified talents in service organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Hilmi Rasyad, Mohd Hassan (2013) The impact of technology application in the improvement of service delivery: a case study at the Road Transport Department Malaysia law enforcement division of Pulau Pinang. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

I

Ida Rizyani, Tahir and Mazita, Mokhtar and Noor Azlinna, Azizan and Shariman, Mustafa (2013) Market Orientation Of Male And Female Entrepreneurs: A Preliminary Study In Malaysia Halal Food Industry. In: International Conference on Management and Business Science (AICMBS 2013) , 5-6 September 2013 , Batu, Indonesia. . (Unpublished) (Unpublished)

Ida Rizyani, Tahir and Mohani, Abdul (2013) The Role of Religious Orientation in the Business Performance of Women Owned Firms: A Preliminary Study in Malaysia Halal Food Industry. The Macrotheme Review , 2 (Issue ). pp. 40-45. ISSN 1848-4735 . (Published)

J

Jeba, Jebunnesa and Abdullah, Ibrahim (2013) An investigation of the English proficiency of potential nurses from University College Shahputra and Kolej Kejururawatan by Occupational English Writing Test: a case study. IOSR Journal of Humanities and Social Science, 18 (1). pp. 62-63. ISSN 2279-0845 (print), 2279-0837 (online). (Published)

Jee, Keh Lih (2013) A study of causes and effects of project change in construction industry. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

K

Karen, Yap Chia Ern (2013) A study of defects reduction in injection process of production line. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

L

Lai, Saw Wai (2013) Simulating modelling for improving productivity of rice packaging mill. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Lazim, Yusra Yaseen and Noor Azlinna, Azizan (2013) The influence of Human Resources Management Practices, and Government’s Role in the Organizational Performance of Small Businesses in Malaysia. Asian Journal of Management Research, 4 (2). pp. 266-287. ISSN 2229-3795. (Published)

Lee, Chia Kuang and Noor Azlinna, Azizan and Fadzida, Ismail and Nurhaizan, Mohd Zainudin (2013) Developing a Proactive Model to Assess Safety and Health Performance in Electrical and Electronic (E&E) Manufacturing Industries. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 DECEMBER 2013 , MS GARDEN HOTEL KUANTAN, PAHANG. pp. 1-2.. (Published)

Lee, Chia Kuang and Yusmin, Jaafar (2013) Prioritization of Factors Influencing Safety Performance on Construction Sites: A Study Based on Grade Seven (G7) Main Contractors' Perspectives. In: International Proceedings of Economics Development and Research: International Conference on Business, Management and Governance (ICBMG2012) , 29-30 December 2012 , Hong Kong. pp. 6-12., 57. ISSN 2010-4626 (Published)

Lee, Tsu Xin (2013) Evaluating the performance of material handling system using simulation. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Loke, Yi San (2013) A study of causes and effects of conflict in construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

M

M. N., Mat Hassan and Norhidayah, Abdull (2013) Assessment of Freshwater Quality in Endau Area. International Journal of Technology Management, 2. pp. 73-83. ISSN 2289-2753. (Published)

Mohamad Rozi, Hassan (2013) PKS perlu bijak manipulasi aset tingkat daya saing. Berita Harian, (7 Mac . p. 29.

Mohammad Haziq, Zamri (2013) The effectiveness of using steel reinforce concrete in comparison with filexible bitumen with polymer modified binder and how it will affect the project time and cost : a case study at kuala lumpur international airport (KLIA). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohd Hafiz, Abdul Mutalif (2013) A study on the effectiveness of technology transfer towards the work performance in SME‘s. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohd Ridzuan, Darun (2013) Theories should be relevant. New Straits Times, (21 Fe . p. 19.

Muhammad Amirul, Zainal Abidin (2013) The role of information and communications technology (ICT) in supply chain management (SCM) in distributor perspective - a study of distributor company of automotive parts in Klang area. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Firdaus, Ismail (2013) The level of service quality for the public transport : a study of Rapid Kuantan in Kuantan routes. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Khairul Haziq, Muhd Fuzi (2013) The impact of branchless banking to business performance: case study at BSN. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Redho, Mardzuki (2013) Project crashing in construction industry: investigation of the strategies, challenges and impacts. Faculty of Engineering Technology, Universiti Malaysia Pahang.

N

N. A., Jalanni and M. N., Abu Seman and C. K. M., Faizal (2013) Investigation of New Polyester Nanofiltration (NF) Membrane Fouling with Humic Acid Solution. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 69-72. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Nasyrah Fahada, Abdul Razak (2013) The impact of multilayer subcontracting system in construction industry in Pahang. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Noor Azlinna, Azizan and Wan Emril Nizar, Wan Embong (2013) The Determinants Of Work Engagement And Its Effect On Turnover Intention And Discretionary Efforts: Examining The Moderating Effect Of Organizational Culture ( A Pilot Study ). Asian Journal Of Social Sciences & Humanities, 2 (3). pp. 370-374. ISSN 2186-8484(Print); 2186-8492(Online) . (Published)

Noor Azlinna, Azizan and Bahari, Mohamed (2013) The Effects of Perceived Service Quality on Patient Satisfaction at a Public Hospital in State of Pahang, Malaysia. Asian Journal Of Social Sciences & Humanities, 2 (3). pp. 307-323. ISSN 2186-8484 . (Published)

Noor Elleza Aqila, Abdullah (2013) A study on implementation of information technology (IT) and its relationship with firm performance. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noor Intan Shafinas, Muhammad and Jolius, Gimbun (2013) Detached Eddy Simulation (DES) of Co-Current Spray Dryer. International Journal of Technology Management, 2. pp. 17-22. ISSN 2289-2753. (Published)

Nor Ain, Binti Musa (2013) A study on muslim consumers’ awareness on JAKIM halal logo. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nor Fillianie, Aziz (2013) A study on service quality in relations towards customer satisfaction among express bus customer in Kuantan /. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Norazlina, Rusli (2013) To study the relationship between bank layout and customer satisfaction. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Norhafizah, Md Sarif and Mohd Zuki, Salleh and Razman, Mat Tahar and Roslinda, Nazar (2013) Numerical Solution of The Free Convection Boundry Layer Flow Over a Horizontal Circular Cylinder With Convective Boundry Conditions. In: The 3rd International Conference on Mathematical Science (ICMS3) , 17-19 December 2013 , Putra Word Trade Center (PWTC) Kuala Lumpur. pp. 1-4.. (Unpublished) (Unpublished)

Norhidayah, Abdull and Lee, Chia Kuang and M. K., Azhar and S., Nurulwahida (2013) Indoor Air Quality and Sick Building Syndrome in Three Selected Buildings. Procedia Engineering, 53. pp. 93-98. ISSN 1877-7058. (Published)

Norhumaira, Juhai (2013) The relationship between factor of motivation and employee performance : the study of manufacturing industry in my sutera sdn.bhd pengkalan chepa, Kelantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Norliza Zafira, Razali (2013) An analysis on reducing defect rate in moulding process of phone casing. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Athirah Afifa, M. L. and Norhidayah, Abdull and Leman, A.M. and Paiman, N.A. (2013) Monitoring of Respirable Particulate among Workers Exposure in Paper Based Industry. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4 December 2013 , MS Garden Hotel Kuantan, Pahang. pp. 1-2.. (Published)

Nur Farahin, Ishak and Sook, Fun Pang and Noor Intan Shafinas, Muhammad and Nuraini, Mohd Yusoff and Mohd Arman, Abd Kadir and Sazwani, Suhaimi and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Jolius, Gimbun (2013) Extraction of Antioxidant, Flavonoids and Phenolic content from N. Sativa. In: International Conference of Chemical Engineering and Industrial Biotechnology , 28-29 August 2013 , Kuantan, Pahang. pp. 1-2.. (Published)

Nurfaridatul Aini, Abdullah (2013) Study on the relationship between leader‘s personality and employees work satisfaction. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Lee, Chia Kuang and Noor Azlinna, Azizan (2013) The Effectiveness of Global Sourcing in Malaysia: Risk Assessing in Construction Industry. International Journal of Technology Management, 2. pp. 23-36. ISSN 2289-2753. (Published)

Nurul Aini, Ibrahim (2013) The effects of worker stress on the job performance in electronic manufacturing. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nurul Ajilah, Mohamad Rosalan (2013) A study on inventory control system practice in Kuantan food processing small medium enterprise (sme). Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Nurul Salwana, Mohamad Kamal (2013) Job characteristics affecting employees' job involvement in fast food industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

R

Ramaraju, Ramgopal Varma and Reddy, M. Chandra Sekhara and Rao, Veeredhi Vasudeva (2013) Experimental Investigation Of Relative Performance Of Water Based Tio2 And Zno Nanofluids In A Double Pipe Heat Exchanger. In: International Manufacturing Engineering Conference (IMEC 2013) , 1-3 July 2013 , Bukit Gambang Resort City, Kuantan, Pahang. pp. 1-10.. (Unpublished) (Unpublished)

Razman, Mat Tahar and Cheng, Jack Kie and Ahmad Borhan, Ahmad Nordin (2013) Measuring Performance Efficiency of Oil Palm Plantations using Window Analysis. Oil Palm Industry Economic Journal, 13 (1). pp. 22-34. ISSN 1675-0632. (Published)

S

Saad, Saima and Abdullah, Ibrahim and Asma, Omme and Muhammad Saad, Khan and Abdul Qadir, Aneesa (2013) PRINCE2 Methodology: An Innovative Way of Project Management. In: Proceedings of 3rd International Conference on Business Management (ICoBM 2013) , 27-28 February 2013 , Lahore, Pakistan. pp. 1-22.. (Published)

Saima, Said and Abdullah, Ibrahim and Omme, Asma and Muhammad Saad, Khan and Junaid, Akhter (2013) Prince2 Methodology: An Innovative Way for Improving Performance of Malaysian Automotive Industry. Journal of Technology Management and Technopreneurship, 1 (1). pp. 101-116. ISSN 2231-7996 . (Published)

Salman, Ahmad and Razman, Mat Tahar (2013) Using system dynamics to evaluate renewable electricity development in Malaysia. Kybernetes, 43 (1). pp. 24-39. ISSN 0368-492X. (Published)

Salman, Ahmad and Razman, Mat Tahar (2013) Can Malaysia Meet Its Renewable Power Plant Expansion Target by 2015? Evidence from System Dynamics Model. International Journal of Technology Management, 2. pp. 37-40. ISSN 2289-2753. (Published)

Siti Haifullia, Ayob (2013) The effectiveness of accuracy in cost estimation by using monte carlo simulation model. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor, Ya (2013) A study on production productivity improvement in food processing industries. Faculty Of Engineering Technology, Universiti Malaysia Pahang.

Siti Roslindar, Yaziz and Noor Azlinna, Azizan and Roslinazairimah, Zakaria and Maizah Hura, Ahmad (2013) The Performance of Hybrid ARIMA-GARCH Modeling in Forecasting Gold Price. In: 20th International Congress on Modelling & Simulation 2013 (MODSIM2013) , 1-6 December 2013 , Adelaide, Australia. pp. 1201-1207.. (Published)

Siti Solehan, Tajuddin (2013) A study on the factors of employee empowerment on work performance in manufacturing industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Sorooshian, Shahryar (2013) Fuzzy Approach to Statistical Control Charts. Journal of Applied Mathematics, 2013 (745153). pp. 1-6. ISSN 1110-757X (print); 1687-0042 (online). (Published)

Sorooshian, Shahryar and Suziyana, Mat Dahan (2013) Analysis on Factors of Non-Compliance of Halal Standard. Journal of Engineering and Applied Sciences, 8 (9-12). pp. 280-281. ISSN 1816-949X. (Published)

Suriani, Mat Noor (2013) The role of project managers in sustainable building process: a study on Malaysian construction industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Ahmad Nazif, Noor Kamar (2013) A Study on Student's Perception Towards The Quality of Services Provided by The Library, University Malaysia Pahang (UMP). In: International Conference on Engineering Education 2013 , 24-25 December 2013 , Madinah. pp. 1-7.. (Unpublished) (Unpublished)

Suziyana, Mat Dahan and S. N., Nina and T. M., Yusof and Ahmad Basirul Subha, Alias (2013) Analysis of Heat Gain in Computer Laboratory and Excellent Centre by using CLTD/CLF/SCL Method. Procedia Engineering, 53. pp. 655-664. ISSN 1877-7058. (Published)

Syaidatul Akma, Bahani (2013) The relationship between job satisfaction and job performance : a case study of a malaysian electronic organization. Faculty of Engineering Technology, Universiti Malaysia Pahang.

T

Teng, Lik Ching (2013) Evaluating the performance of the operation at the sawmill production company. Faculty of Engineering Technology, Universiti Malaysia Pahang.

V

Varma, Ramaraju Ramgopal and Abdullah, Ibrahim (2013) Instrumentation to Measure the Heat Transfer Coefficients in an Automobile Radiator. Journal Of Innovation in Electronics and Communication, 3 (2). pp. 24-27. ISSN 2240-9946. (Published)

W

Wan Nazrul Helmy, Wan Mohd Zain (2013) Pupuk semangat sukarelawan mahasiswa. Berita Harian, (22 Ma . p. 30.

Y

Yeap, Chuen Theng (2013) A study of waste minimization at Fujikura Federal Cables Sdn. Bhd. Faculty Of Engineering Technology, Universiti Malaysia Pahang.