Browse by Journal Title

A

Azam, M. and Hassan, S. A. and Puan, O. C. and Azhari, S. F. and Faiz, R. U. (2022) Performance of autonomous vehicles in mixed traffic under different demand conditions. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10050-10062. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Abdullah, Z. and Peeie, M. H. and Zakaria, M. A. and Ishak, M. I. and Shahrom, M. A. and Kujunni, B. (2022) Motion planning and tracking trajectory of an autonomous emergency braking pedestrian (AEB-P) system based on different brake pad friction coefficients on dry road surface. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 10002 -10013. ISSN 2180-1606. (Published)

Abdullah, N. A. Z. and Asri, M. N. A. M. and M. S. M., Sani (2022) Strategies of finite element modeling for spot welded joints and its modal correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9543-9550. ISSN 2180-1606. (Published)

Athirah, Yusof and Nurul Shahida, M. S. (2021) Prevalence of Musculoskeletal Discomfort Among Workers in a Medical Manufacturing Facility. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8687-8694. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Azizul Qayyum, Basri and N. M. Zuki, N. M. and Nelfiyanti, Nelfiyanti and Yusrizal, Yusoof (2021) SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 8895-8906. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2019) Adjustable Valve Semi Active Suspension System for Passenger Car. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6470-6481. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Agung, E. H. and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Bachtiar, Dandi and Cionita, Tezara and Jamiluddin, Jaafar (2018) Water Absorption Behaviour and Mechanical Performance of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Zaifazlin, Zainordin and Priyandoko, Gigih and Zamri, Mohamed (2018) Performance Simulation Analysis for Magnetorheological Damper with Internal Meandering Flow Valve. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5511-5521. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Anggono, Willyanto and M. M., Noor and Suprianto, F. D. and Lesmana, L. A. and Gotama, G. J. and Setiyawan, A. (2018) Effect of Cerbera Manghas Biodiesel on Diesel Engine Performance. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5667-5682. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Al-Dhahebi, Adel Mohammed and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles’ interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 44 (4). pp. 4690-4703. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Adel Mohammed, Al-Dhahebi and Ahmad Kadri, Junoh and Zamri, Mohamed and Wan Zuki Azman, Wan Muhamad (2017) A computational approach for optimizing vehicles' interior noise and vibration. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (4). pp. 4690-4703. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Adnan Mohammed, Hussein and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman (2017) Heat Transfer Enhancement Using Hybrid Nanoparticles in Ethylene Glycol Through a Horizontal Heated Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4183-4195. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. Y., Adam and A. N., Oumer and Azri, Alias and M., Ishak and M. M., Noor (2017) Investigation of Thermal-Hydraulic Performance in Flat Tube Heat Exchangers at Various Tube Inclination Angles. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4542-4560. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahamed, J. U. and Raiyan, M. F. and Hossain, MD. S. and M. M., Rahman and Salam, B. (2016) Production Of Biogas From Anaerobic Digestion Of Poultry Droppings And Domestic Waste Using Catalytic Effect Of Silica Gel. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 2180-1606. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Abdul Adam, Abdullah and Amir, Khalid and N., Jaat and A., Sapit and A., Razali and Bukhari, Manshoor and Izzuddin, Zaman (2015) Performance and Emissions Characteristics of Crude Jatropha Oil Biodiesel Blends in a Diesel Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2447-2457. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and S. N. A., Abdullah and Abdul Adam, Abdullah and B. M., Deros (2015) Whole-Body Vibration Exposure Of Malaysian Taxi Drivers. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2786-2792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, D. (2014) Effects of Cooling Rates on Thermal Profiles and Microstructure of Aluminium 7075. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1685-1694. ISSN 2180-1606. (Published)

A., Shamsudeen and S., Abdullah and A. K., Ariffin and Yusoff, Ali (2013) Design and Simulation of a Cylinder Head Structure for A Compressed Natural Gas Direct Injection Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1620-1629. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Adnan, M. Husein and R. A., Bakar and K., Kadirgama and K. V., Sharma (2013) Experimental Measurements of Nanofluids Thermal Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 850-863. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman and Siti Rabiatull Aisha, Idris (2013) Intermetallic Evolution for Isothermal Aging up to 2000 Hours on Sn-4Ag-0.5Cu and Sn-37Pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) Lean Manufacturing Perceptions and Actual Practice Among Malaysian SME’s in Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 820-829. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. N. M., Rose and B., Md. Deros and M. N., Ab. Rahman (2013) Lean manufacturing perceptions and actual practice among Malaysian SME's in automotive industry. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (1). pp. 820-829. ISSN 2180-1606. (Published)

A. N. M., Rose and B. M., Deros and M. N., Ab. Rahman (2013) A Study on Lean Manufacturing Implementation in Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1467-1476. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. K., Azad (2012) A Comprehensive Study of Di Diesel Engine Performance Withvegetable Oil: An Alternative Bio-Fuel Source of Energy. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 576-586. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Amir, Al-Falahi and Yusoff, M. Z. and Diyar, I. Ahmed (2012) An Experimental Evaluation of Transient Flows in a Supersonic Gun Tunnel. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 701-712. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and M.Z., Nuawi and N.F., Kamaruddin (2011) Comparative Study Of Whole-Body Vibration Exposure Between Train And Car Passengers: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 490-503. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

A. R. M., Rosdzimin and S. M., Zuhairi and C. S. N., Azwadi (2010) Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

B

Baharuddin, N. J. and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2022) Study on die shoulder patterning method (DSPM) to minimise springback of U-bending. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9509-9518. ISSN 2180-1606. (Published)

Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

B.B, Sahari and M.M, Shahzamanian and M, Bayat and Z.N, Ismarrubie and F, Mustapha (2012) Comparison of Thermoelastic Results in Two Types of Functionally Graded Brake Discs. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 660-669. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

B., Ghobadian and P., Nematizade and G., Najafi (2012) Investigation of Fossil Fuel and Liquid Biofuel Blend Properties Using Artificial Neural Network. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 639-647. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Belavendram, N. (2010) Application Of Genetic Algorithms For Robust Parameter Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 211-220. ISSN 1985-9325(Print); ISSN: 2180-1606 (Online). (Published)

D

Dayangku Noorfazidah, Awang Sh'ri and Muhammad Abdul Hisyam, Abu Hassan and Zahiruddeen Salam, Zahari and W. S., Wan Harun (2019) Finite element simulation of equal channel angular pressing: effect of die angle and number of passes. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6402-6414. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

D., Ramasamy and Goh, Chin Yuan and R. A., Bakar and Z. A., Zainal (2014) Validation of Road Load Characteristic of a Sub-Compact Vehicle by Engine Operation. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1820-1831. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

E

Esfahani, J.A. and Karbasian, H.R. (2012) Optimizing the Shape of Rotor Blades for Maximum Power Extraction in Marine Current Turbines. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 722-729. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

F

Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and S., Mohd Nadzir (2021) Numerical prediction of creep rupture life of ex-service and as-received grade 91 steel at 873 K. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8845 -8858. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2015) Analysis of a Metal Matrix Composites Automotive Component. International Journal of Automotive and Mechanical Engineering (IJAME), 11 (June). pp. 2531-2540. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

F., Basrawi and Hassan, Ibrahim and Mohd Yusof, Taib and Lee, Giok Chui (2013) Optimum Thickness of Wall Insulations and Their Thermal Performance for Buildings in Malaysian Climate. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1207-1217. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

H

Hamada, Khalaf I. and Rahim, M. F. and Raham, M. M. and A. Bakar, Rosli (2022) Throttling effect on the performance and emissions of a multi-cylinder gasoline fuelled spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10084-10093. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Hazirah, Ismail and Muhamad Zuhairi, Sulaiman and Okawa, Tomio (2022) Heat transfer characteristics of metallic body during quenching in saturated nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9403-9411. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)

Hoang, A. T. and M. M., Noor and Pham, X. D. (2018) Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (1). pp. 5110-5125. ISSN 2180-1606. (Published)

Hamada, K. I. and Mohammed, M. K. and M. M., Rahman (2014) Development of a Test-Rig for a Modern Motorcycle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2034-2041. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Hamada, K. I. and M. M., Rahman (2014) An Experimental Study for Performance and Emissions of a Small Four-Stroke SI Engine For Modern Motorcycle. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1852-1865. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

I

Ismail, Muhammad Yusri and Beg, M. S. and Jamlos, M. F. and Azmi, W. H. and Badrulhisam, N. H. and Awad, Omar I. (2022) Potential and limitation of internet of things (IOT) application in the automotive industry: An overview. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 9939 -9949. ISSN 2180-1606. (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and S. M., Asyraf and I. M., Sollehudin and I. M., Ishak (2020) Experimental Study on the Effect of Emergency Braking without Anti-Lock Braking System to Vehicle Dynamics Behaviour. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7832-7841. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and R. I. M., Eiman and Muhammad Izhar, Ishak and S. M., Asyraf (2019) Investigation on vehicle dynamic behaviour during emergency braking at different speed. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6161-6172. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman and F., Basrawi (2016) Statistical analysis and optimum performance of the gas turbine power plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ibrahim, Thamir K. and M. M., Rahman (2016) Effects Of Cycle Peak Temperature Ratio On The Performance Of Combined Cycle Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3389-3400. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, Tamir K. and M. M., Rahman (2015) Effects of Isentropic Efficiencies on the Performance of Combined Cycle Power Plants. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2914-2928. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Iqbal, AKM Asif and Arai, Yoshio (2015) Study On Low-Cycle Fatigue Behavior Of Cast Hybrid Metal Matrix Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2504-2514. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ibrahim, T. K. and M. M., Rahman (2014) Effect of Compression Ratio on the Performance of Different Strategies for the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. 1747-1757. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

J

Juliawati, Alias (2020) Role of aluminium on the microstructure and corrosion behaviour of magnesium prepared by powder metallurgy method. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 1-8. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Jamiluddin, Jaafar and J. P., Siregar and A., Sulaiman and K. A. A., Jalal and Tezara, C. (2016) Study on Properties of Tapioca Resin Polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3178-3189. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K

Khalid, N. S. and Rahim, M. R. and Hassan, M. F. (2022) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer using cascade-forward backpropagation neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9419-9432. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

K. A., Azuddin and A. K., Junoh and Zamri, Mohamed and M. T., Abdul Rahman (2020) A comparative study on interior acoustic comfort level of compact cars using data mining approach. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7695-7708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamal, M. and M. M., Rahman (2014) Finite Element-Based Fatigue Behaviour of Springs in Automobile Suspension. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1910-1919. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2014) Electrode Wear Rate of Graphite Electrodes during Electrical Discharge Machining Processes on Titanium Alloy Ti-5Al-2.5Sn. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1782-1792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamal, M. and M. M., Rahman (2014) Fatigue Life Estimation Models: A State of the Art. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1599-1608. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kamil, Mohammed and M. M., Rahman and R. A., Bakar (2014) An Integrated Model for Predicting Engine Friction Losses in Internal Combustion Engines. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1695-1708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K. Kalyani, Radha and S.Naga, Sarada and K., Rajagopal (2012) Development of a Chest Freezer-Optimum Design of an Evaporator Coil. International Journal of Automotive and Mechanical Engineering (IJAME), 5, . pp. 597-611. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L

L. C., Wor and M. M., Rahman (2015) Stress Behavior Of Tailor-Welded Blanks For Dissimilar Metals Using Finite Element Method. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2541-2554. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Zetty Akhtar, Abd Malek and M., Ishak (2013) Investigation on Aluminium-Stainless Steel Dissimilar Weld Quality Using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and A. R., Razali and M., Ishak (2013) Investigation of Aluminum-Stainless Steel Dissimilar Weld Quality using Different Filler Metals. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1121-1131. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and Bun, T. and Nagata, S. and Shikama, T. (2012) The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 713-721. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M

M. Eaki, . and K., Kadirgama and D., Ramasamy and W. S. W., Harun and Abou-El-Hossein, K. A. and Samylingam, L. and Kok, Chee Kuang (2024) Enhancing Machining performance in Stainless Steel Machining using MXene Coolant: A Detailed Examination. International Journal of Automotive and Mechanical Engineering (IJAME), 21 (1). pp. 10993-11009. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Muhammad Shahruddin, Azmi and Munirah, Mohamad Izham and Muhammad Hilmi, Jalil and Muhammad Hazli, Mazlan (2023) CT-FEA of inhomogeneous lumbar with different loadings of the spinal cage. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10894 -10905. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Hatifi, Mansor and M. S. M., Sani and Mohd Firdaus, Hassan (2023) Eigenfrequency shift of piezoelectric backplate in vibro-acoustic energy harvesting. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10850 -10861. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Ammar, Nik Mu’tasim and Mohd Fadzil Faisae, Ab Rashid (2023) Hybrid flow shop scheduling problem with energy utilization using non-dominated sorting genetic algorithm-III (NSGA-III) optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10862 -10877. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mutra, R. R. and Reddy, D. M. and Amarnath, M. and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani (2023) Artificial neural network-based fault diagnosis of gearbox using empirical mode decomposition from vibration response. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10695-10709. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari and F., Lamin (2023) High-cycle fatigue life behaviour of fabricated glass fibre-reinforced polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). 10711 -10719. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Ruslan and M. F., Hassan (2022) Unbalance failure recognition using recurrent neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9668-9680. ISSN 2180-1606. (Published)

M. R. A., Mohd Reduan and Z., Zulkfli and Zamzuri, Hamedon and Fatchurrohman, Nanang (2022) Effect of Tool Shoulder-to-Pin Diameter Ratio (D/d) on the Mechanical Properties of Friction Stir Processed Mg-Micro Al2O3 Composite. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10103-10111. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli (2021) Performance characteristics of a small poppet valve crankshaft engine in free-piston engine mode. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 9149 -9157. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Ghazali and F. R. M., Romlay and A. A., Ehsan (2021) Manufacturing of polymer-based 1×2 Y-branch symmetric and asymmetric waveguide coupler through moulding technique. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8998 -9005. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and J. M., Zikri and Abdul Adam, Abdullah (2021) Sound intensity mapping on single cylinder direct injection diesel engine with the application of palm oil methyl ester biodiesel. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8833-8844. ISSN 2180-1606. (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M., Zalinawati and Siregar, J. P. and Tezara, C. and Jaafar, J. and M. H. M., Hamdan and Oumer, A. N. and T., Rihayat (2020) Effect of surface modification on mechanical properties of buri palm (Corypha Utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Mohd Kamal, Kamaruzzaman (2020) Cyclic pressure variations in a small diesel engine fueled with biodiesel and antioxidant blends. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7851 -7857. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni (2020) Enhanced brady-tachy heart automotive (BT-Heartomotive) device for heart rate monitoring during driving. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). 7599 -7606. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohamad, M. H. and M. Nafis, O. Z. (2019) Simulation program for 4th axis CNC machining in NX CAM system. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6971-6986. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Mawardi, Saari and Nurul A’in, Nadzri and A. M., Halil and M., Ishak and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2019) Design of eddy current testing probe for surface defect evaluation. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). 6357- 6367. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. N. M., Salleh and M., Ishak and M. H., Aiman and M. M., Quazi and A. M., Hanafi (2019) Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7364-7374. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Sahril, Mohd Fouzi and Khaironi, Mohd Jelani and N. A., Nazri and M. S. M., Sani (2018) Finite element modelling and updating of welded thin-walled beam. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5874-5889. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and Kamal, M. (2017) Fatigue Life Prediction of Titanium Alloy for Block Loading Using The Hybrid Approach of Critical Plane and Continuum Damage Mechanics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 4080-4096. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Yazid, Abu and K. R., Jamaludin and Muhammad Aizzat, Zakaria (2017) Characterisation of Activity Based Costing on Remanufacturing Crankshaft. International Journal of Automotive and Mechanical Engineering (IJAME). ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. E., Babiker and A. R. A., Aziz and M., Heikal and S., Yusup and Hagos, F. Y. (2016) Experimental and Simulation Study on Steam Gasification of Phoenix-Dactylifera Date Palm Seeds. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3201-3214. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mathivanan, D. B. and Siregar, J. P. and M. R. M., Rejab and Bachtiar, Dandi and Tezara, C. (2016) Modification of Pineapple Leaf Fibre to Reinforce Polylactic Acid Composite with Improved Mechanical Properties. In: International Symposium on Advanced Polymeric Materials (ISAPM 2016) , 16-19 May 2016 , Putra World Trade Centre (PWTC), Kuala Lumpur. .

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kaamal and M. M., Rahman (2015) Dual-Criteria Method For Determining Critical Plane Orientation For Multiaxial Fatigue Prediction Using A Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2571-2581. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammad Akmal, Akashah and R., Mamat and Abdul Adam, Abdullah and A., Aziz and H. M., Yassin (2015) Effect Of Ambient Temperature On Diesel-Engine Combustion Characteristics Operating With Alcohol Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2373-2382. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Portinjection Hydrogen-Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2383-2395. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ghafoori and B., Ghobadian and G., Najafi and M., Layeghi and A., Rashidi and R., Mamat (2015) Effect of Nano-Particles on the Performance and Emission of a Diesel Engine using Biodiesel-Diesel Blend. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3097-3109. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Yusof, Taib and Azim, Arshad and Suziyana, Mat Dahan and F., Basrawi (2015) Experimental Study of a Domestic Refrigerator with POE-AI2O3 Nanolubricant. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2243-2252. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) Fatigue Life Estimation Based On Continuum Mechanics Theory With Application Of Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2586-2598. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) An Integrated Approach For Fatigue Life Estimation Based On Continuum Mechanics Theory And Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2756-2770. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat and Azmi, W. H. and G., Najafi (2015) Nanofluids Heat Transfer Enhancement Through Straight Channel Under Turbulent Flow. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2294-2305. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2015) Parametric Optimization Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2591-2599. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online). (Published)

M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Effect Of Air-Fuel Ratio on Temperature Distribution and Pollutants For Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1980-1992. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mei, Gan Siew and A. R., Yuvaraj and Siti Maznah, Kabeb and M. M., Yusoff and V. G., Chigrinov and Hegde, Gurumurthy (2014) Biocompatible Polymer Embedded In Light-Sensitive Materials: Investigation Of Structural Properties. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2025-2033. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2014) Air Fuel Ratio Study For Mixture Of Biogas And Hydrogen On Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2144-2154. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and Ibrahim, Tamir K. (2014) Effect of the Compression Ratio on the Performance of Different Strategies of the Gas Turbine. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1747-1757. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and Azma Salwani, Ab Aziz (2014) Artificial neural network modeling of grinding of ductile cast iron using water based sio2 nanocoolant. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1649-1661. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Puvanesan and M. M., Rahman and Najiha, M. S. and K., Kadirgama (2014) Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1538-1549. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thickness Using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Hatifi and M. H., Firdaus and A. R., Yusoff (2014) Modal Analysis of Dissimilar Plate Metal Joining with Different Thicknesses using MIG Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1723-1733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Tahseen, Tahseen Ahmad and M. M., Rahman (2013) Experimental Investigation on Heat Transfer and Pressure Drop Characteristics of Air Flow over a Staggered Flat Tube Bank in Crossflow. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (2013). pp. 900-911. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Talal, Yusaf (2013) The Analysis of Recirculation Zone and Ignition Position of Non-Premixed Bluff-Body for Biogas Mild Combustion. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1176-1186. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman and M. S. M., Sani (2013) Application of Multibody Simulation for Fatigue Life Estimation. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 912-923. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and Talal, Yusaf and Baker, P. and Hamawand, I. (2013) Effect of Compressed Natural Gas Mixing on the Engine Performance and Emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1416-1429. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2013) Integrated Simulation Model for Composition and Properties of Gases in Hydrogen Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1242-1255. ISSN 1985-9325 (Print); 2180-1606 (Online). (Published)

Moniruzzaman, M. and Rakib, M. M. and Matin, F. T. (2012) Cr-Ni Alloy Electrodeposition and Comparison with Conventional Pure Cr Coating Technique. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 692-700. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Z., Yusoff and A. M., Mohseen and A., Al-Falahi and N. H., Shuaib (2012) The Effects of Area Contraction on Shock Wave Strength and Peak Pressure in Shock Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 587-596. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Muhamad Arifpin, Mansor and A., Ohsato and S., Sulaiman (2012) Knowledge Management for Maintenance Activities in the Manufacturing Sector. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 612-621. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) A Review of Mild Combustion and Open Furnace Design Consideration. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 730-754. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Ashraf, Ahmad and Yasmin, Abdul Wahab and Raja Mohd Taufika, Raja Ismail (2011) Non-collocated Fuzzy Logic and Input Shaping Control Strategy for Elastic Joint Manipulator: Vibration Suppression and Time Response Analysis. In: International Conference on Computer Control and Automation (ICCCA) 2011 , 1-3 May 2011 , Jeju Island, South Korea. , 4 (June 2011). ISSN 1985-9325(Print); 2180-1606 (Online) (Unpublished)

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. H. M., Haniff and Ahmad Rasdan, Ismail and B. M., Deros and M. N. A., Rahman and K., Kadirgama (2011) The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 3. pp. 306-317. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Muhamad Zuhairi, Sulaiman and M. Rosdzimin, A. R. and N. Azwadi , C. S. (2010) Simulation Ofmixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2 (Jul. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Noor and K., Kadirgama and E. H., Jamaluddin and M. M., Rahman (2009) Method of Predicting, Estimating and Improving Mean Time between Failures in Reducing Reactive Work in Maintenance Organization. In: Proceedings of National Conference on Postgraduate Research (NCON-PGR) 2009 , 1st October 2009 , UMP Conference Hall, Malaysia. pp. 1176-1186., 8. ISSN 1985-9325(Print); 2180-1606 (Online)

Mohamad Heerwan, Peeie and M. A., Shahrom and Muhammad Izhar, Ishak and Kato, H. and Narita, T. Investigation of the performance of plugging braking system as a hill descent control (HDC) for electric-powered wheelchair. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10906 -10916. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N

Norhana, Mohd Aripin and Nawanir, Gusman and Suhaidah, Hussain and Fatimah, Mahmud and Lee, Khai Loon (2024) Sustenance Strategies for Lean Manufacturing Implementation in Malaysian Manufacturing Industries. International Journal of Automotive and Mechanical Engineering (IJAME), 21 (1). pp. 11018-11035. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Mohd Nadzeri, Omar and Nur Aqilah, Othman and M. A., Mohamad Radzi and K. A., Abu Kassim (2023) The effect of motorcycle helmet type on head response in oblique impact. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10786-10797. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nelfiyanti, . and N. M. Zuki, N. M. and M. F. F., Ab Rashid (2022) Analysis of measurement and calculation of MSD complaint of chassis assembly workers using OWAS, RULA and REBA method. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). 9681 -9692. ISSN 2180-1606. (Published)

N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2020) Computational modal analysis on finite element model of body-in-white structure and its correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7915-7926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal profile and microstructure of wrought aluminium 7075 for semisolid metal processing. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7842 -7850. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Nur Farizah Diana, Abdul Razak and M. S. M., Sani and Azmi, W. H. (2020) Heat transfer augmentation in heat exchanger by using nanofluids and vibration excitation - A review. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7719-7733. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nagahiro, R. and Nurrina, Rosli and Hangai, Y. and Yano, A. and Amagai, Kenji (2019) Uniform Heating Model Analysis for the Formation Process of Aluminium Foam by Spot-Type Halogen Lamp. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (4). pp. 7170-7180. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S., Mohamed and Juliawati, Alias (2019) The influence of friction stir welding of dissimilar AZ31 and AZ91 magnesium alloys on the microstructure and tensile properties. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6675-6683. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nurainaa, Elias and Nafrizuan, Mat Yahya (2018) Simulation study for controlling direct current motor position utilising fuzzy logic controller. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5989-6000. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and Nurul Aina, Husaini and M. M., Rahman and I., Zaman (2017) Dynamics Properties of a Go-Kart Chassis Structure and Its Prediction Improvement Using Model Updating Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3887-3897. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama and D., Ramasamy and M. A., Maleque and M. M., Noor (2017) Experimental Investigation On The Performance Of The Tio2 And Znohybrid Nanocoolant In Ethylene Glycol Mixture Towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3190-3200. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2016) Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (2). pp. 3345-3360. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman (2015) Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2771-2785. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Forced Convection Heat Transfer Using Water-Ethylene Glycol (60:40) Based Nanofluids in Automotive Cooling System. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2747-2755. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nurul Atikah, Mohd Rodzri and Zulsyazwan, Ahmad Khushairi and Wan Mohd Hafizuddin, Wan Yussof and N., Zainol and Rozaimi, Abu Samah (2015) Main Factor Contribution in Factorial Screening for Ferulic Acid Production from Fibre-Pressed Oil Palm Frond (FPOPF) Using Mixed Culture. In: Asian Congress on Biotechnology 2015 (ACB2015) , 15-19 November 2015 , Kuala Lumpur. , 11. ISSN 1985-9325(Print); 2180-1606 (Online)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman (2014) A computational fluid dynamics analysis of single and three nozzles minimum quantity lubricant flow for milling. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1891-1900. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Norhaida, Ab Razak and Md Mustafizur, Rahman and Kadirgama, Kumaran (2014) Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (1). pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nurhidayah, Abdull and Azian, Hariri and N. Azreen, P. and A. M., Leman and M. Z. M., Yusof (2014) Determination of Customer Requirement for Welding Fumes Index Development in Automotive Industries by using Quality Function Deployment Approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. M., Fadhillahanafi and K. Y., Leong and M. S., Risby (2013) Stability and Thermal Conductivity Characteristic of Carbon Nanotube Based Nanofluids. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1376-1405. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Norhaida, Ab Razak and Rahman, Md Mustafizur and Kadirgama, Kumaran (2013) Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1578-1587. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1140-1150. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2013) Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool. International Journal of Automotive and Mechanical Engineering (IJAME), 8 (1). pp. 1140-1150. ISSN 2180-1606. (Published)

N. M. Zuki, N. M. (2012) Decomposition of Manufacturing Processes: A Review. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 545-560. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

O

Omer, Abdeen Mustafa (2012) Built Environment: Relating The Benefits of Renewable Energy Technologies. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 561-575. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Q

Quanjin, Ma and M. R. M., Rejab and Kang, Shaofu and Idris, Mat Sahat and M.A.A., M. Zin (2020) The energy-absorbing characteristics of single spherical-roof contoured-core (SRCC) cell with composite materials. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8265-8273. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

R

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rusiyanto, R. and Widodo, R. D. and Al-Janan, D. H. and Rohmah, K. and Siregar, J. P. and Nugroho, A. and Fitriyana, D. F. (2021) Effect of sintering temperature on the physical properties of Ba0.6Sr0.4TiO3 prepared by solid-state reaction. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8752 -8759. ISSN 2180-1606. (Published)

Rosmazi, Rosli and Zamri, Mohamed and Priyandoko, G. (2021) Semi active seat suspension system using modified intelligent active force control. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8498 -8504. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ramyashree, M. S. and Kumar, K. and Priya, S. Shanmuga and Sudhakar, K. (2020) Synthesis and characterisation of indium tin oxide thin films for dye-sensitised solar cells using natural fruit extracts. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). 9284 -9291. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rahman, Md. Arafatur and Ali, Jahan and M. Nomani, Kabir and Azad, Saiful (2017) A Performance Investigation on IoT Enabled Intra-Vehicular Wireless Sensor Networks. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3970-3984. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Raiyan, M. F. and Ahamed, J. U. and M. M., Rahman and Salam, M. A. (2017) Performance and Exergetic Investigation of a Domestic Split Air Conditioner using Blends of R22 and R290. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (2). pp. 4125-4139. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

S

Safril, Saka and Wan Hamzah, Azmi and M. Z., Sharif and N. N. M., Zawawi (2024) The Tribology Evaluation on a Four-Ball Tribometer Lubricated by Al2O3/PAG Nanolubricants. International Journal of Automotive and Mechanical Engineering (IJAME), 21 (1). pp. 11055-11063. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Siti Rabiatull Aisha, Idris and M. N., Mazelan (2023) Effect of microwave hybrid heating on mechanical properties and microstructure of Sn3.0Ag0.5Cu/Cu solder joints. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sanderasagran, A. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Idris, Mat Sahat (2022) Alternative method of nature inspired geometrical design strategy for drag induced wind turbine blade morphology. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). pp. 9759-9772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Suitability analysis of solar tracking PV system in the airport based on glare assessment. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9061-9070. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sivakumar, A. and Sathiyamoorthi, R. and Jayaseelan, V. and Gandhi, R. Ashok and Sudhakar, K. (2019) Performance of waste insulating mineral oil-based biodiesel in a direct-injection CI engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9349-9361. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S., Asri and M. F., Othman and Abdul Adam, Abdullah and Z., Abdullah and Z., Azmi (2019) Analysis of Organic Germanium Ge-132 as Cetane Improver in Diesel Combustion Process. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6134-6145. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Sahid, N. S. M. and M. M., Rahman and K., Kadirgama and D., Ramasamy and Maleque, M. A. and M. M., Noor (2017) Experimental Investigation on the Performance of the TiO2 and ZnO Hybrid Nanocoolant in Ethylene Glycol Mixture towards AA6061-T6 Machining. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (1). pp. 3913-3926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Siti Nur Atikah, Abdullah and Abdul Adam, Abdullah and Ahmad Rasdan, Ismail and B. M., Deros (2015) A Descriptive Analysis Of Factors Contributing To Bus Drivers’ Performances While Driving: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2430-2437. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Suriati, Ghazali and Mariatti, Jaafar and Azizan, Aziz (2014) Synthesis of Silver Nanoparticles By Chemical Reduction Method: Effect of Reducing Agent and Surfactant Concentration. International Journal of Automotive and Mechanical Engineering (IJAME), 105. pp. 1920-1927. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Saliza Azlina, Osman (2013) Intermetallic Evolution for Isothermal Aging Up To 2000hours on Sn-4ag-0.5cu and Sn-37pb Solders with Ni/Au Layers. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1348-1356. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Sarad, S. Naga and Raju, A.V. Sita Rama and Radha, K. Kalyani and Sunder, L. Syam (2012) Augmentation of Turbulent Flow Heat Transfer in A Horizontal Tube with Varying Width Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 797-810. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Singh, Rupinder (2012) Comparison of Polyjet Printing and Silicon Moulding as Rapid Plastic Moulding Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 777-784. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S.Y., Lam and N. H., Shuaib and H., Hasini and N. A., Shuaib (2012) Computational Fluid Dynamics Investigation on the use of Heat Shields for Thermal Management in a Car Underhood. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 785-796. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Singh, Rupinder and Singh, Rajinder (2012) Effect of Workpiece Volume on Shell Wall Thickness Reduction in Rapid Casting of Aluminum using Three-Dimensional Printing. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 680-691. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sharma, Korada Viswanatha and L. Syam, Sundar (2011) Laminar Convective Heat Transfer And Friction Factor Of AL2O3 Nanofluid In Circular Tube Fitted With Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan-Ju). pp. 265-278. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Sharma, Korada Viswanatha and B., Vijaya Lakshmi and T., Subrahmanyam and V., Dharma Rao (2011) Turbulent Film Condensation of Pure Vapors Flowing Normal to a Horizontal Condenser Tube - Constant Heat Flux at the Tube Wall. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul. pp. 455-470. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

T

Tan, F. Y. and Hassan, M. H. A. and Johari, N. H. and Omar, M. N. and Hasanudin, I. (2022) The effect of wearing soccer headgear on the head response in soccer heading. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). 10112--10120. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Thamir K., Ibrahim and M. M., Rahman and M. K., Mohamed and F., Basrawi (2016) Statistical Analysis and Optimum Performanceof the Gas Turbine Power Plant. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3215-3225. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

T. T., Ayu and M. H., Hailu and Hagos, F. Y. and Atnaw, Samson M. (2015) Energy Audit and Waste Heat Recovery System Design for a Cement Rotary Kiln in Ethiopia: A Case Study. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2983-3002. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman (2014) Heat Transfer and Pressure Drop Prediction In An In-Line Flat Tube Bundle by Radial Basis Function Network. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2003-2015. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2014) An experimental study of air flow and heat transfer over in-line flat tube bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2014) An Experimental Study of Air Flow and Heat Transfer Over In-Line Flat Tube Bank. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1487-1500. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

W

Wan Muhammad Noor Sarbani, Mat Daud and Mohd Adnin, Hamidi and Rizalman, Mamat and Daing Mohamad Nafiz, Daing Idris (2023) A prediction of graphene nanoplatelets addition effects on diesel engine emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10758-10766. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Athikary, B. and M. S. M., Sani (2020) Correlating finite element model of a car spot-welded front-end module in the light of modal testing data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7974 -7984. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Ayub, M. A. and M. S. M., Sani and M. S., Mohd Zin (2019) Frequency based substructuring for structure with double bolted joints : a case study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6188-6199. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Y

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z

Zul, M. H. and Ishak, M. and Nasir, R. M. and Aiman, M. H. and Quazi, M. M. (2023) Effect of laser-textured surface of Ti6Al4V on frictional wear behavior. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (1). pp. 10165-10174. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zainordin, A. Z. and Zamri, Mohamed and F., Ahmad (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8577 -8584. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zetty Akhtar, Abd Malek and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) An experimental investigation on thermal conductivity and viscosity of graphene doped CNTs /TiO2 nanofluid. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 8224-8233. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z. M., Hafizi and Vorathin, E. and A. M., Aizzuddin and K. S., Lim (2019) High-Resolution Fibre Bragg Grating (FBG) Pressure Transducer for Low-Pressure Detection. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (2). pp. 6783-6795. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zuhaira, Abdullah and Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mohd Firdaus, Taufik and Mrwan, Anes G. (2018) Effect of pentanol-diesel fuel blends on thermo-physical properties, combustion characteristics, engine performance and emissions of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5435-5450. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zahari, Taha and Hadi, Abdul Salaam and Tuan Mohammad Yusoff, Tuan Ya and S. Y., Phoon and C. F., Tan and M. A., Akiah (2013) Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1477-1586. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2013) An Investigation of Acoustic Emission Signal Attenuation for Monitoring of Progressive Failure in Fiberglass Reinforced Composite Laminates. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1442-1456. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)