UMP Institutional Repository

Items where Division is "Faculty of Chemical & Natural Resources Engineering" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 385.

A

Abdul Haffizh, Zulkifli (2013) Investigation the effect of cationic surfactant on heat transfer performance in heat exchanger. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Karim, Shaikh Abdul Nasir (2013) Development of Polyvinylidene Fluoride - Polydimethylsiloxane (Pvdf-Pdms) Thin Film Composite (Tfc) Membrane For Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Adilah, Abd Rashid (2013) The study of drying parameter of carrageenan using spray dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Afifi, Ibrahim (2013) Effect of pH and enzyme loading on the protein concentration during collocalia fuciphaga hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Amirhilmi, A. Razak (2013) The Study of Two-Phase Flow for Crude Oil Production Using Computational Fluid Dynamics (CFD). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Hamidi, Ahmad Hamidi (2013) Decomposition of calcium carbonate in cockle shell. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman (2013) UMP latih usahawan mengenai pengekstrakan dan teknik pemprosesan herba. CREATE . p. 31. ISSN 1823-7487

Aiza, Abd Rahman (2013) Kinetic study of acetic acid production from banana stem waste using soil bacteria, Bacillus Thuringiensis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Al, Muhandisah (2013) Kejuruteraan kimia di dalam al-Quran. Utusan Malaysia, (1 Nov .

Ali, Eman N. and Nazik, Musa (2013) An investigation of Anti -Cancer Activity of Moringa Oleifera Leaves. In: 11th International Symposium on Biocontrol and Biotechnology (ISBB 2013), 1 - 4 October 2013 , Alexandria-Egypt. pp. 1-6..

Ali, Eman N. and Tay, Cadence Isis (2013) Characterization of Biodiesel Produced from Palm Oil via Base Catalyzed Transesterification. Procedia Engineering, 53. pp. 7-12. ISSN 1877-7058

Ali, Abdul Rahman and Najmuldeen, Ghazi Faisal (2013) Effects of Adding Alcohols, Electrolytes and Carboxyl Methyl Cellulose (CMC) on Design Parameters in Internal Loop Airlift Bubble Column. International Journal of Engineering Sciences & Research Technology, 2 (12). pp. 3415-3426. ISSN 2277-9655

Ang, Chun How (2013) Photocatalysis of glycerol solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Anuj, Kumar (2013) Influence of nanofillers on the properties of urea formaldehyde resin and medium density fiberboard. PhD thesis, Universiti Malaysia Pahang.

Anuj, Kumar and Gupta, Arun and K. V., Sharma and Mohammed, Nasir and Khan, Tanveer Ahmed (2013) Influence of Activated Charcoal as Filler on the Properties of Wood Composites. International Journal of Adhesion and Adhesives, 46. pp. 34-39. ISSN 0143-7496

Aqilah, Yahya (2013) Biodiesel production from moringa oleifera seeds using heterogeneous acid and alkali catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

As Eleyana, Ali (2013) Modelling and Environmental Assessment of Heterogeneous Catalysis Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Asmadi, Ali @ Mahmud (2013) Synthesis, Characterizationa Performance of Polysulfone/Cellulose Acetate Phthalate/ Polyvinylpyrrolidone (Psf/CAP/PVP) Blend Ultrafiltration Membranes. PhD thesis, Universiti Malaysia Pahang.

Asmadiyana, Mahadi (2013) Feasibility study on locally isolated strain for butanol production by using oil palm trunk sap. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Atabani, A. E. and Mahlia, T. M. I. and Masjuki, H. H. and Irfan Anjum, Badruddin and Wan Mohd Hafizuddin, Wan Yussof and Chong, W. T. and Teong Lee, Keat (2013) A Comparative Evaluation of Physical and Chemical Properties of Biodiesel Synthesized from Edible and Non-Edible Oils and Study on the Effect of Biodiesel Blending. Energy, 58. pp. 296-304. ISSN 0360-5442 (Print), 1873-6785 (Online)

Atikah, Mad Nawi (2013) Formulation of Shampoo From Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Ayuni Athirah, Azman (2013) Effect of ph solution on the water absorbency of superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azian, Othman (2013) Investigation on the potential of orange peel waste in the production of useful homemade solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azni Yusra, Ahmad Kasmiri (2013) Developments of 2 Inches Loop Pipelines for Paraffin Deposition Testing Facility Using Plant Design Management System (PDMS). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Azri, Marmoh (2013) Optimal design of heat recovery system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

B

Badariah, Mohd Nasir (2013) The Effect of Extraction Parameters on Antioxidant Activity of Cosmos Caudatus. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Badhrulhisham, Abdul Aziz (2013) Establishment of Malaysian Rare Earth Industry as Contribution to the Green Technology Initiatives. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3-4 December 2013 , MS Garden Hotel, Kuantan. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Future Direction and Challenges of Engineering Technology in Malaysia. In: Science and Engineering Technology National Conference (SETNC) 2013, 3-4 July 2013 , Bandar Baru Bangi, Selangor, Malaysia. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Future Direction and Challenges of Malaysian Rare Earth Industry as a Potential Green Economy Engine. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28 - 29 August 2013 , Kuantan, Pahang. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Knowledge Application Generates Transformation. In: National Conference on Engineering Technology (NCET) 2013, 1-2 July 2013 , Shah Alam, Selangor. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Malaysian Board of Technology (MBOT) and The Future of Technicians. In: Inaugural National Conference for Technicians and TVET Semi-Professionals, 7 Oct 2013 , Kuching, Sarawak. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Melayu Islam dan Cabaran. In: Persidangan Kebangsaan Pegawai MARA Daerah, 9 December 2013 , Melaka. . (Unpublished)

Badhrulhisham, Abdul Aziz (2013) Roles and Contribution Of Universities in Managing Controversial Issues in Community: Case Study Of UMP’s Involvement in Lynas Project. In: National Conference on Higher Education Institution and Community Engagement, 26-27 August 2013 , Universiti Malaysia Kelantan, Jeli, Kelantan. . (Unpublished)

Bahrun, Mohd Shakir (2013) Production of Modified Cassava Flour (MOCAF). Masters thesis, Universiti Malaysia Pahang.

Balqis, Adam (2013) Development of natural adhesive using lignin and soy protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Beg, M. D. H. and M. R., Islam (2013) Characterization of Laccase-Treated Kenaf Fibre Reinforced Recycled Polypropylene Composites. BioResources, 8 (3). pp. 3753-3770. ISSN 1930-2126 (print); 1930-2126 (online)

Bello, Ibrahim Garko (2013) Development of new green demulsifier composition for oil production. Masters thesis, Universiti Malaysia Pahang.

Bhuiyan, Md. Khairul Hassan and Rahman, Md. Mahbubur and Mina, Md. Forhad and M. R., Islam and Gafur, Md. Abdul and Begum, Afia (2013) Crystalline Morphology and Properties of Multi-walled Carbon Nanotube Filled Isotactic Polypropylene Nanocomposites: Influence of Filler Size and Loading. Composites Part A: Applied Science and Manufacturing, 52. pp. 70-79. ISSN 1359-835X

C

Che Ahmad Arif, Che Mud (2013) Separation of aromatic from aliphatic by using [EIM][ETSO4] ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Chin, S. Y. and Anwaruddin, Hisyam and Norul Shahida, Che Din and Haniif, Prasetiawan and Abdullah, Azahari and Ikmal Hisham, Maharon (2013) Reactor Modeling and Simulation for Intensifying The Propylene Production In A Petrochemical Plant. In: 1st National Conference on Knowledge Transfer (KTP 01), 21 - 23 August 2013 , Hotel Equatorial Bangi, Selangor. pp. 1-10.. (Unpublished)

Chin Weng, Foo (2013) Membrane Application in the Recovery of Gaharu Active Marker Compound from Water Mixture. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. (2013) Biodegradability of Nanoparticle Modified Fiber Reinforced Polyester Resin Nanocomposite. Procedia Engineering, 68. pp. 431-438. ISSN 1877-7058

Chowdhury, M. N. K. and Beg, M. D. H. and Khan, Maksudur R. and M. F., Fina (2013) Modification of Oil Palm Empty Fruit Bunch Fibers by Nanoparticle Impregnation and Alkali Treatment. Cellulose, 20 (3). pp. 1477-1490. ISSN 0969-0239

Chowdhury, M. N. K. and M. F., Fina and Khan, Maksudur R. and Beg, M. D. H. (2013) Cu Nanoparticles for Improving the Mechanical Performances of Oil Palm Empty Fruit Bunch Fibers as Analyzed by Weibull Model. Polymer Bulletin, 70 (11). pp. 3103-3113. ISSN 0170-0839(Print); 1436-2449(Online)

Chua, Gek Kee and Abdul-Rahman, Badarulhisam and Chisti, Yusuf (2013) Production and Scale-Up of a Monoclonal Antibody Against 17-Hydroxyprogesterone. Biotechnology Progress, 29 (1). pp. 154-164. ISSN 1520-6033

D

Dhiyatul Ridhwan, Md Nasarudin (2013) Potential evaluation oil palm frond juice for bioethanol fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

E

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Bioelectricity Generation from Palm Oil Mill Effluent in Microbial Fuel Cell Using Polacrylonitrile Carbon Felt as Electrode. Water, Air and Soil Pollution , 224 (1533). pp. 1-11. ISSN 0049-6979 (print); 1573-2932 (online)

E., Baranitharan and Khan, Maksudur R. and D. M. R., Prasad and Jailani, Salihon (2013) Effects of Electrode Materials on Power Generation of Microbial Fuel Cell. In: 2nd International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB) 2013, 28-29 August 2013 , Zenith Hotel, Kuantan. pp. 1-6.. (Unpublished)

El-Hadad, Omar (2013) Introducing a New Technology for Seawater Treatment With Solar Energy. In: Water Malaysia 2013, 23-25 April 2013 , Kuala Lumpur Convention Centre. . (Unpublished)

Emine, Seydametova (2013) Production of Pravastatin by Filamentous Fungi Isolated from Soil. PhD thesis, Universiti Malaysia Pahang.

Erna Wati, Hajar (2013) Identification and characterization of stevia rebaudiana extraction for total phenolic compound using soxhlet extraction and microwave-assisted extraction techniques. Masters thesis, Universiti Malaysia Pahang.

Eugene Hien Yoong, Ng (2013) Dynamic Simulation of Bulk Polymerisation of Styrene Using ODE Solver Within Matlab Software. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

F

Fadzilah, Abdul Latif (2013) Humic acid removal by polyester nanofiltaration (NF) membrane synthesized from triethanolamine (TEOA) monomer. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Faezah, Bakar (2013) Modelling and simulation of fermentation product purification using batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fakhri Fadullilah, Sulaiman (2013) Fabrication of Medium Density Fibre Board From Oil Palm Frond Using Waste Low Density Polyethylene (LDPE) Composites as Possible Partial Replacement For Binder. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Faradila, Naim and Rawaida, Jaafar and Nurul Wahidah, Arshad and Rosyati, Hamid and Mohd Najib, Razali (2013) Unclean Hand Detection Machine using Vision Sensor. In: Electronics, Communications and Photonics Conference (SIECPC), 2013 Saudi International, 27-30 April 2013 , Riyadh. pp. 1-4..

Farah Fatihah, Mohd Azhari (2013) A Simulation Study on Model Predictive Control Application for Depropanizer Using Aspen Hysys. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Farah Hafidzah, Ahmad (2013) Antioxidant Activity and Total Phenolic Content of Benincasa Hispida Fruit Extracts From Various Extraction Solvents. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Faridah, Mohd Nor (2013) A comparative study on the effect of clay loading under normal and auto thermal extrusion to the morphology structure and thermal stability of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fathin, Idros (2013) Supply chain decision making in chemical industries using Analytical Hierarchy Process (AHP) a palm oil industry case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin Nadhirah, Mahazan (2013) Formulation, characterization, and optimation of emulsion fuel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatin ‘Atikah, Abd. Manan (2013) Exploring of the Transesterification of Castor Oil to Produce Biodiesel Using Quicklime as a Basic Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Fatinnurhazwani, Zainal (2013) Effect of Ultrasound on Enzymatic Extraction of Zingiber Officinale. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Fatmawati, Adam (2013) Boost efforts to make our own drugs. New Straits Times, (15 Ap . p. 19.

Ferdous, Kaniz and Uddin, M. Rakib and Uddin, M. Rahim and Khan, Maksudur R. and Islam, M. A. (2013) Preparation and Optimization of Biodiesel Production from Mixed Feedstock Oil. Chemical Engineering and Science, 1 (4). pp. 62-66. ISSN 2328-7381

G

Geraldine Chan, Sue Ching (2013) Study on the effect of clay loading under normal and auto-thermal extrusion to the morphology structure and thermal properties of nylon 6 nanocomposites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Go Bee, Chew (2013) Wastewater Treatment by Continuous Stirred Tank Reactor (CSTR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Goh Mun, Chun (2013) Study on Optimum Condition of Empty Fruit Bunch-Graft-Poly (Acrylamide) Superabsorbent Polymer Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Gupta, Arun and Khan, Tanveer Ahmed and Saidatul Shima, Jamari and Rajan, Jose and Mohammed, Nasir and Anuj, Kumar (2013) Synthesis and Characterization of Carbon Fibers and their Application in Wood Composites. BioResources, 8 (3). pp. 4171-4184. ISSN 1930-2126 (print); 1930-2126 (online)

Gupta, Ritu and Norrozila, Sulaiman and Gupta, Arun (2013) An Improved Algorithm for Prediction of Young's Modulus of Wood Plastic Composites. Scientific Research and Essay , 8 (16). pp. 649-656. ISSN 1992-2248

Gwee Xian, Fu (2013) Ultrasonic Extraction of Anthocyanins From Clitoria Ternatea Flowers Using Response Surface Methodology. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

H

Haitham Mohammed, Ali Al-Abee (2013) In situ Transesterification of Biodiesel For Possible Biodiesel Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hajar Athirah, Mohd Sukri (2013) Reduction of Cd(II), Ag(II) AND Cu(II) Using Rubber Seed Shell : Adsorption Isotherm and Kinetics. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Hamidah, Jusoh (2013) Simulation of the ceramic ball formation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hanifan, Abd Jalil (2013) Catalytic water oxidation of wastewater containing acetic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hasany, Syed Farhan and Nour, A. H. and Kumar, Anuj and Sunarti, Abd Rahman (2013) Facile Fabrication of y-Fe2O3 Embedded Nanocomposite of Multiwalled Carbon Nanotubes (MWCNTs). In: 3rd Nano Today Conference, 8-11 December 2013 , Singapore. p. 1.. (Unpublished)

Ho, Kah Sing and Chye, Joanna Jo Ean and Chin, S. Y. and Cheng, C. K. (2013) Characterization of Industrial Pt-Sn/Al2O3 Catalyst and Transient Product Formations during Propane Dehydrogenation. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (1). pp. 77-82. ISSN 1978-2993

How, Liew Futt (2013) Production of biodiesel from palm oil through heterogeneous catalysis using calcined eggshell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

How, Teoh Wei (2013) Recovery of dilute acetic acid via esterification reaction catalyzed by Amberlyst 15. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hua, Chyn Lee and Jolius, Gimbun and Suzana, Yusup and Cheng, C. K. (2013) Bio-syngas Production from Glycerol Dry Reforming over Cement Clinker-supported Nickel Catalyst. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Hua, Chyn Lee and Kah, Weng Siew and Jolius, Gimbun and Cheng, C. K. (2013) Application of Cement Clinker as Ni-Catalyst Support for Glycerol Dry Reforming. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 137-144. ISSN 1978-2993

I

Iqmil, Hamdan (2013) Utilization of Eggshell Waste as Solid Catalyst for Biodiesel Production from Jatropha Curcas Oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Ismail Ammar, Mohamat (2013) The study characteristics of electrospinning nanofibers in polyetyhlene oxide(PEO)for controlled released and target delivery. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Izirwan, Izhab and Mohd, Asmadi and Nor Aishah, Saidina Amin (2013) Characterization of Oil Palm Shell Activated Carbon and ZSM-5 Supported Cobalt Catalysts. In: 6th International Congress of Chemistry and Environment 2013, 8-10 July 2013 , Antwerp, Belgium. pp. 1-8.. (Unpublished)

J

Jasveena, R.Prabhagaran (2013) Study on Delignification of Fiber on the Temperature and Naoh Added Concentration by Ultrasound Assistance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Jessinta, Sandanasamy and Azhari, H. Nour and Saiful Nizam, Tajuddin and Nour, A. H. (2013) Fatty Acid Composition and Antibacterial Activity of Neem (Azadirachta indica) Seed Oil. The Open Conference Proceedings Journal, 4. pp. 42-48. ISSN 2210-2892

Jie, Liew Kok (2013) Scale up study of salt added batch distillation of azeotropic mixture : isopropanol/water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Joanne, Tey Choo Hong (2013) Ferulic acid production from banana stem waste: kinetic study. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun (2013) Research paper competition. Quest, 9 (5). p. 13. ISSN 1985-8159

Jolius, Gimbun and Ali, Shahid and Kanwal, Chitra Charan Suri Charan and Liyana, Amer Shah and Nurul Hidayah, Muhamad Ghazali and Cheng, C. K. and Said, N. (2013) Biodiesel Production from Rubber Seed Oil Using Activated Cement Clinker as Catalyst. Procedia Engineering, 53. pp. 13-19. ISSN 1877-7058

Jou, Wendy Kong Yin (2013) Removal of manganese from synthetic wastewater by adsorption. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

K

K., Ramesh and R., Ramesh and T. R., Kubendran (2013) Application of McAllister Model to Measure and Predict Thermo Physical Properties of Binary Liquid Mixture at Various Temperatures. In: International Conference on Chemical and Biological Engineering (ICCBE 2013), 14-15 November 2013 , Venice, Italy. pp. 670-674..

Kah, Weng Siew and Hua, Chyn Lee and Jolius, Gimbun and Cheng, C. K. (2013) Hydrogen Production via Glycerol Dry Reforming Over La-NiAl2O3 Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2). pp. 160-166. ISSN 1978-2993

Kamilia Hani, Mohd Bashri (2013) Study on a maximum paper fibre recovery network design. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kathrina Nirmala, Manoharan (2013) Radiation grafting of fuctional polymers. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Keong, Lau Weng (2013) Catalystic wet oxidation of wastewater containing acrylic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Azirul, Muhamad Asrai (2013) Destabilization of crude oil emulsions via microwave assisted ultrasonic technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khaled Salem, Aljfairi (2013) Ultrasonic membrane anaerobic system for wastewater treatment. Masters thesis, Universiti Malaysia Pahang.

Khan, Maksudur R. and E., Baranitharan and D. M. R., Prasad (2013) Treatment of Palm Oil Mill Effluent in Microbial Fuel Cell Using Polyacrylonitrile Carbon Felt as Electrode. Journal of Medical and Bioengineering, 2 (4). pp. 252-256. ISSN 2301-3796

Khan, Maksudur R. and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Aphanamixis Polystachya: A Potential Non-Edible Source of Biodiesel in Bangladesh. Journal of Chemical Engineering, 28 (1). pp. 45-49. ISSN 2221-7436

Khan, Maksudur R. and Ferdous, Kaniz and Deb, Anjan and Ferdous, Jannatul and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Higher FFA Containing Castor Oil. International Journal of Scientific & Engineering Research, 4 (12). pp. 401-406. ISSN 2229-5518

Khan, Maksudur R. and Ferdous, Kaniz and Uddin, M. Rakib and Islam, M. A. (2013) Preparation of Biodiesel from Soybean Oil by using Heterogeneous Catalyst. International Journal of Energy and Environment (IJEE), 4 (2). pp. 243-252. ISSN 2076-2895 (Print); 2076-2909 (Online)

Khan, Maksudur R. and Reddy Prasad, D. M. and Hamidah, Abdullah and Mohidin Batcha, Abeed Fatima (2013) Kinetic Analysis on Cell Growth and Biosynthesis of Poly (3-Hydroxybutyrate) (PHB) in Cupriavidus Necator H16. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 516-519. ISSN 2010-3638

Khan, Maksudur R. and Saha, Pradip and Sony, Shamima Yesmin and Mazumder, Sraboni and Deb, Tanmoy Kanti and Islam, Akhtarul (2013) Kinematic Study of Reducing Sugar Production From Rice Straw by Raw Woodrotting Enzyme Strain. Journal of Chemical Engineering, 28 (1). pp. 32-35. ISSN 2221-7436

Khan, Maksudur R. and Salam, M. A. and Pondith, Paritush Chandra and Islam, Ariful and Uddin, Mohammad Rakib and M. A., Islam (2013) Conversion of Cellulosic Waste into Fermentable Sugar: Process Optimization. Journal of Chemical Engineering, 28 (1). pp. 27-31. ISSN 2221-7436

Khan, Muhammad and Azhari, H. Nour and Nour, A. H. and Elhussein, Salah A. A. (2013) Non-edible Part of Capsicum annuum-novel Source of Acetylcholinesterase Inhibition: Molecular Docking and in Vitro Enzymatic Studies. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Khim, Tan Weng (2013) Dynamic modelling of crude distillation unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

L

Lai Kin Ming, Vera (2013) Preparation and characterization of catalyst from local industry waste, red gypsum for biodiesel synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Laing, Penelope Ering (2013) Effects of media components on arachidonic acid production by Candida krusei under submerged condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Latifah Sakinah, Ismail (2013) Thermodynamic analysis of glycerol dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lau, Siaw Jing (2013) Thermal degradation kinetics of bioflavonoids from Orthosiphon stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Law, Woon Phui (2013) Optimization of solution polymerization of methyl methacrylate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Yue Wei (2013) Development of anion-exchange membrane chromatography from regenerated cellulose membrane by attaching different spacer arm length of diamine monomer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee Siew, Ling (2013) Microencapsulation and Spray Drying of Orthosiphon Staminues. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Leong, Sheng Yau (2013) Copper doped titanium dioxide (TiO2) nanoparticles for enhanced photocatalytic activity under visible light irradiation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lim, Beng Seng (2013) Production and characterization of chitosan from shrimp shells. Faculty of Chemical & Natural Resources Engineerig, Universiti Malaysia Pahang.

Lin, Choo Quan (2013) Simultaneous power generation and waste water treatment using microbial fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ling, Yeu Shin (2013) Study on the effect of processing parameters in the adsorption of xylose from glucose-xylose mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

M

M. M., Yusoff and Muhammed, B. Suliman and Nour, A. H. and Azhari, H. Nour and Kuppusamy, Palaniselvam and A. R., Yuvaraj and Adam, Mazza S. (2013) Fatty Acid Composition and Antibacterial Activity of Swietenia Macrophylla King Seed Oil. African Journal of Plant Science, 7 (7). pp. 300-303. ISSN 1996-0824

M. Z., Muzzakar and S., Ahmad and M. A., Yarmo and A., Jalar and Mohd Bijarimi, Mat Piah (2013) Shear Strength of Single Lap Joint Aluminium-Thermoplastic Natural Rubber (Al-TPNR) Laminated Composite. Journal of Physics: Conference Series, 423. pp. 1-6. ISSN 1742-6588

Mahadevan, Deshan (2013) Fiber characterisation of oil palm empty fruit bunch OPEFB)enzymme treatment and ultrasound treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Makky, Essam A. and Mohd Rasdi, S. H. and Al-Dabbagh, Jinan B. and Najmuldeen, Ghazi Faisal (2013) Microbial Utilization Of Waste for Nanoparticles Production. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Universiti Malaysia Pahang (2013) Method for Bioleaching of Silver Nanoparticles Under Thermophilic Conditions. 2013001239.

Mani, Shalini (2013) Extraction and characterization of Jatropha Curcas Linnaues seed oil through soxhlet method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maryudi, M. and Anwaruddin, Hisyam and R. M., Yunus and Beg, M. D. H. (2013) Thermo-oxidative Degradation of High Density Polyethylene Containing Manganese Carboxylate. International Journal of Engineering Research and Applications (IJERA), 3 (2). pp. 1156-1165. ISSN 2248-9622

Mazni, Ismail (2013) Model development and validation of samaria doped ceria (SDC) based solid oxide fuel cell operating with practical fuels. PhD thesis, University of Waterloo.

Mazrul Nizam, Abu Seman and Nidal, Hilal and M., Khayet (2013) UV-Photografting Modification of NF Membrane Surface for NOM wfouling Reduction. Desalination and Water Treatment, 51 (25-27). pp. 4855-4861. ISSN 1944-3994

Mei, Charlotte Kho Sui (2013) Investigating oil mixture flow characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mior Ahmad Khushairi, Mohd Zahari (2013) Scaling up of poly (3-hydroxybutyrate) production from oil palm frond juice by Cupriavidus necator (CCUG52238T). Research Journal of Chemistry and Environment, 17 (7 ). pp. 18-24. ISSN 0972-0626 (Print), 2278-4527 (online)

Mior Ahmad Khushairi, Mohd Zahari and Dhiyatul Ridhwan, Md Nasarudin (2013) Potential Evaluation of Oil Palm Frond Juice for The Production of Bioethanol. In: Conference on Industrial Academia Initiative in Biotechnology (CIA:Biotech 2013), 5-7 December 2013 , Equatorial Cameron Highlands,Pahang. .

Universiti Putra Malaysia (2013) Renewable Sugars From Oil Palm Wastes. WO/2013/043036.

Mira Syahirah, Abd Wahit (2013) Utilizing classical scaling for fault identification based on continuous-based process. Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Hadi, Tairin (2013) Development of polyethersulfone–poly vinylidenefluoride (PES-PVDF) thin film composite membrane FOR CO2/N2 gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Norzuhri, Basirun (2013) A study on Pipeline Inspection Gauge (PIG) Flow Parameters in Small Size Pipe. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Roslan, Dzulkifli (2013) Extraction of anthraquinone glycosides from the mixture of cassia alata stems and leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Sazwan, Ismail (2013) Extraction of beta-carotene from carrot via soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Zaidi, Yahaya (2013) Study on factors affecting extraction of carotene from carrot by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamed Asshafie, Mohamed Sharif (2013) Solid phase transformation of carbamazepine-fumaric acid cocrystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad, Nasir and Gupta, Arun and Beg, M. D. H. and Chua, Gek Kee and Jawaid, Mohammad and Kumar, Anuj and Ahmed Khan, Tanveer (2013) Fabricating Eco-friendly Binderless Fiberboard from Laccase-treated Rubber Wood Fiber. BioResources, 8 (3). pp. 3599-3608. ISSN 1930-2126 (print); 1930-2126 (online)

Mohammad Aizzat, Nawi (2013) Separation of xylose from glucose-xylose solution using ion exchange resins. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Amar, Mohammad Ali (2013) tudy on optimum condition of empty fruit bunch-graft-acrylic acid superabsorbent polymer composites. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammed, Nasir (2013) Fabrication and characterization of medium density fiber board prepared from enzyme treated fiber and lignin based bio adhesive. PhD thesis, Universiti Malaysia Pahang.

Mohammed, Nasir and Gupta, Arun and Beg, M. D. H. and Chua, Gek Kee and Kumar, Anuj (2013) Fabrication of Medium Density Fibreboard from Enzyme Treated Rubber Wood (Hevea brasiliensis) Fibre and Modified Organosolv Lignin. International Journal of Adhesion & Adhesives, 44. pp. 99-104. ISSN 0143-7496

Mohana, Muniapan (2013) Effect of Enzyme Concentration and Temperature on Viscosity and Betacyanin Content From Pitaya Waste Extract. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Abas, Jamaluddin (2013) Structure and tuning internal model control for integrating process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Amirul Hakim, Hamidi (2013) Removal mercury from wastewater by electrocoagulation using iron plate as electrode. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ashraf, Abdul Rahman (2013) Study of removal btx by pseudomonas putida in bioreactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azrin, Mohd Radin (2013) Effect of Solvents and Temperatures on Photo-Reduction of Carbon Dioxide Using Alumina Doped Tio2 Catalysts. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ehran, Razali (2013) Study on batch adsorption process of Monoethanolamine (MEA) wastewater treatment using rice husk and banana peels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faiz, A. Razak (2013) Influence of biodiesel formulation and blending to fuel properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizan, Jamaluddin (2013) Isolation and identification of acetic acid producer from soil using banana stem waste as a substrate. Masters thesis, Universiti Malaysia Pahang.

Mohd Faridhwan, Mohamad Zulkapli (2013) Dynamic model of co2 removal using aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Razak @ Ali (2013) Hydrodynamic behaviour in liquid-liquid flow system: bench scale study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Rafidah, Rahim and Amir, Aziz and Liyana, Amer Shah (2013) Fuel Physical Characteristics of Biodiesel Blend Fuels with Alcohol as Additives. Procedia Engineering, 53. pp. 701-706. ISSN 1877-7058

Mohd Hanafi, Shaari (2013) Denitrogenation of model oil using imidazalium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hanafi, Shaari (2013) Denitrogenation of model oil using imidazalium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hatim Helmi, Mohd Zahariman (2013) Photocatalytic Reduction of CO2 With Solvent on Alumina Supported With Tio2. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Huzaifah, Hamzah (2013) Implementing PCA Based on Fault Detection System Based on Selected Important Variables for Continuous Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Iezany, Rosli (2013) Enhancing the efficiency process for separation of dry shell and palm kernel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Anwar, Md Nor (2013) Extraction of bioactive compound from pulp and roots of benincasa hispida a.k.a. kundur. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Mizuan, Omar (2013) An investigation of using moringa oleifera seeds oil as lubricant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nazarni, Che Isa (2013) Effect of pH and Temperature on Fructosyltransferase (Ftase) Production from Candida Krusei. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Rusllim, Mohamed and Hamzah, Ahmad and Mazrul Nizam, Abu Seman (2013) Estimating the State-of-Charge of All-Vanadium Redox Flow Battery using a Divided, Open-circuit Potentiometric Cell. Electronics and Electrical Engineering = Elektronika ir Elektrotechnika, 19 (3). pp. 37-42. ISSN 1392-1215 (print); 2029-5731 (online)

Mohd Syakirin, Zulkarnain (2013) Simulation and Environmental Assessment of Biodiesel Using Supercritical Methanol. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Safie (2013) Fabrication and Characterization of Bacteria Cellulose, Polyvinyl Alcohol and Fragrant Oil With Antimicrobial Effect For Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Rasdi (2013) Scale up study on production of biodiesel from Jatropha crude oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Akmal, Muhamad Yusuf (2013) 3D design of heterogeneous catalytic biodiesel reactor and its plant using Aveva PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Daud, Azizul Rahman (2013) Photo-Catalytic Reduction of Carbon Dioxide Over Alumina Doped Titanium Dioxide Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Hadi, Sulaiman (2013) Solvent screening study of carbamazepine crystal polymorph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad, Khan and Norasyidah, Harun and Azhari, H. Nour and Elhussein, Salah A. A. (2013) In Vitro Antioxidant Evaluation of Extracts of Three Wild Malaysian Plants. Procedia Engineering, 53. pp. 29-36. ISSN 1877-7058

Muhammad, Shahid Ali Wafa and Jolius, Gimbun and Cheng, C. K. and Said, N. (2013) Enhancement of Biodiesel Yield from High FFA Malaysian Rubber Seed Oil with Sodium Methoxide Treated Limestone. Journal of Engineering and Technology, 4 (1). pp. 123-132. ISSN 2180-3811

Muhammad Fais, Haron (2013) Kinetic modeling of transesterification of refined palm oil to produce biodiesel using Strontium Oxide(SrO)as a heterogeneous catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Farhan, Adnan (2013) The effect of temperature on polymethyl methacrylate acrylic (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fuad Fikri, Amir (2013) Effect of different additives on the production of bacterial cellulose from pineapple waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hariz, Muhammad (2013) Supply chain decision making using Analytical Hierarchy Process (AHP) : a pharmaceutical industry case study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hasbi, Abd Halid (2013) A study on the performance of local exhaust ventilation system using Mahalanobis approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Kamal, Jamali (2013) Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Kharin Annuar, Sairan (2013) The effect of low sulphur wax residique (LSWR) and sorbitan monooleate (SPAN-80) to the emulsion fuel stability. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Noor Azreen, Mohd Khairu (2013) Study on Continuous Adsorption Process for Monoethanolamine (MEA) Wastewater Treatment Using Granular Activated Carbon and Sugarcane Bagasse. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Nor Asnizan, Nawawi (2013) Dynamics simulation of Vinyl Chloride Monomer (VCM) reactor using aspen hysys. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Norazan , Abu Hassan (2013) Fatty acid of moringa oleifera oil at different sample condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ridzuan, Mamat (2013) Utilizing multiple linear regression technique for interential measure of continuous-based process monitoring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Suhaimi, Man (2013) Production of Bio-Oil from Empty Fruitbunch (EFB) via Pyrolysis Process. Masters thesis, Universiti Malaysia Pahang.

Muhammad Syafiq, Abd Rahman (2013) Nanobeads formation for anticancer drug release controlled by electrospinning. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Aziz (2013) Thermodynamic simulation of biogas composition in agricultural waste gasification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Yunus, Zainal Abidin (2013) Stability of papain in aqueous organic solvent by reverse phase liquid chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

N

N., Masngut (2013) A study of butanol production in a batch oscillatory baffled bioreactor. PhD thesis, Newcastle University.

N. A., Jalanni and M. N., Abu Seman and C. K. M., Faizal (2013) Investigation of New Polyester Nanofiltration (NF) Membrane Fouling with Humic Acid Solution. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 69-72. ISSN 0127-9696 (print); 2180-3722 (online)

N. S., Nasri and Siti Noraishah, Ismail and U. D., Hamza and M. M., Hamed (2013) Study on the Use and Modification of a Sustainable Solid Waste Material for Carbon Dioxide Capturing. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 555-571..

N. S., Nasri and U. D., Hamza and A., Abdulkadir and Siti Noraishah, Ismail and M. M., Hamed (2013) Utilization of Sustainable Palm Empty Fruit Bunch Sorbents for Carbon dioxide Capture. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 582-587..

Nabila Hakim, Mohamad Asri (2013) Production of methane gas by Ultrasonic Membrane Anaerobic System (UMAS) using sewage sludge as substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadarajan, Ramanan (2013) Title production and characterization of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadzirah, Sha'ari (2013) Study the Mix Culture and Wild Strain Sp. of Microalgae in Highly Concentrated Municipal Waste Water. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nahdiyyah, Rosslan (2013) Inoculum development in 2L stirred tank fermenter for production of PHB biopolymer in a 20 L stirred tank fermentation on a medium of oil palm frond juice (OPFJ). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nasihah, Mohd Nor (2013) Enzymatic extraction of stevioside from Stevia Rebaudiana leaves using cellulase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Kim Hoong (2013) Photo-treatment of palm oil mills effluent (pome) over cu/tio2 photocatalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Wei Keong (2013) Lubricant ester synthesis from rubber seeds waste using cockle shells as solid catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng Wei, Yee (2013) Effect of Sawdust Species and Particle Size on Glucose Production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nguang, Suok Ling (2013) Potential application of papain enzyme from papaya leaves in making antibacteria and antifungal handwash and hand sanitizer. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Fatima, Nek Kamarzaman (2013) Ultrasonic extraction of Clinacanthus nutans and its antioxidant activity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Nor Aziati, Abd Aziz (2013) Optimization of pre-treatment process of glycerol residue for succinic acid production. Masters thesis, Universiti Malaysia Pahang.

Nina Farhana, Mohd Jamaludin and N., Zainol (2013) Screening of Factors Affecting Pre-Treatment by Ammonia-N Removal From Poultry Manure Wastewater by Using Soil Water to Improve Biogas Production. In: 27th Regional Conference on Solid State Science & Technology ( RCSSST27), 20-22 December 2013 , The Magellan Sutera Resort and Spa, Kota Kinabalu, Sabah. pp. 1-6..

Nisham Asmeer, Roslan (2013) Biodegradable films from poly (lactic acid) (PLA)-chitosan-polyethylene glycol (PEG) : fabrication and evaluation of mechanical properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nitthiyah, Jeyaratnam (2013) Optimization and Characterization of Melamine Urea Formaldehyde (MUF) Based Adhesive With Waste Rubber Powder (WRP) as Filler. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Adilah , Md Salehan (2013) Study on continuous adsorption process for Monoethanolamine (MEA) wastewater treatment using treated rice husk and sugarcane bagasse. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Atikah, Mohd Badruddin (2013) Zeolites catalyst from oil palm ash for petrochemical industries. Masters thesis, Universiti Malaysia Pahang.

Noor Azlinna, Abu Bakar (2013) A Comparative Study on the Carbon Products from Hydrothermal Carbonization and Torrefaction Process Using Wood Fiber Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Noor Fadilah, Mohd Sabri and Syed, M. Saufi (2013) Screening of Cation Resins for the Preparation of Cation Exchanger Mixed Matrix Membranes for Copper Ion Removal. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. .

Noor Fauzani, Ayop (2013) Enzyme hydrolysis of old newspaper to produce simple sugar for fermentation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Fiza Asiqin, Mohd Ramlan (2013) Biogas Production from Benincasa Hispida Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hana , Md Yusof (2013) Pyrolysis of agricultural waste: effect of temperature and heating rate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Hariah , Wahab (2013) Temperature effect on polymerization kinetics of poly methyl methacrylate (PMMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Ida Amalina, Ahamad Nordin and Hidayah, Ariffin and Yoshito, Andou and Mohd Ali, Hassan and Yoshihito, Shirai and Haruo, Nashida and Wan Md Zin, Wan Yunus and Subbian, Karuppuchamy and Nor Azowa, Ibrahim (2013) Modification of Oil Palm Mesocarp Fiber Characteristics Using Superheated Steam Treatment. Molecules, 18. pp. 9132-9146. ISSN 1420-3049 (print); 1420-3049 (online)

Noor Intan Shafinas, Muhammad and Jolius, Gimbun (2013) Detached Eddy Simulation (DES) of Co-Current Spray Dryer. International Journal of Technology Management, 2. pp. 17-22. ISSN 2289-2753

Noor Sabrina, Ahmad Mutamim and Zainura, Zainon Noor and Mohd Ariff, Abu Hassan and Yuniarto, Adhi and Olsson, Gustaf (2013) Membrane Bioreactor: Applications and Limitations in Treating High Strength Industrial Wastewater. Chemical Engineering Journal, 225. pp. 109-119. ISSN 1385-8947

Noor Shahira, Saripa (2013) Study on the effect of ultrasound on oxygen uptake rate (gas-liquid mass transfer) of saccharomyces cerevisae fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noorlisa, Harun and Douglas, P. L. and Croiset, E. and Sandoval, L. A. (2013) Dynamic Simulation and Control of MEA Absorption Process for CO2 Capture from Power Plants. In: Proceedings of the 6th Conference on Process Systems Engineering (PSE ASIA 2013), 25-27 June 2013 , Putra World Trade Centre (PWTC), Kuala Lumpur. pp. 1-6.. (Unpublished)

Nor Ashikin , Abdul Hamid (2013) Natural dye products business plan. Masters thesis, Universiti Malaysia Pahang.

Nor Emma Erwina, Wahab and C. K. M., Faizal (2013) Enhancement of Gas Separation performance of Carbon Nanotubes Mixed Matrix Membranes with Acid and Alkali Treatment. In: Conference on Membrane Science and Technology, 27-28 August 2013 , Hotel MS Garden,Kuantan. pp. 1-7.. (Unpublished)

Nor Hanimah, Hamidi (2013) Enzymatic depolymerazation of lignin by laccases. PhD thesis, University of Nottingham.

Nor Hazwani Syuhada, Azmi (2013) Adsorption Study of Fructosyltransferase Immobilization By Using Various Adsorbent. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Salwani, Ismail (2013) Study on wax deposition of heavy crude oil in pipeline transportation by using oil in water emulsion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Shafiqah, Mohd Nasir (2013) Development of membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nor Zawani, Zainuddin (2013) Studying the delignification of wood fibers using laccase enzymes. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noradlinnaini, Muhamad (2013) Study on the Adsorption Process of Monoethanolamine (MEA) Wastewater Using Activated Carbon and Treated Rice Husk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Noraziah, Abu Yazid and Theng, C. C (2013) Production of Food Grade Thickener from Benincasa Hispida. In: 4th International Conference on Biotechnology and Food Science/Journal of Bioscience,Biochemistry and Bioinformative, 21 - 22 April 2013 , Jinma Hotel, Beijing China. pp. 1-5.. (Unpublished)

Norazila, Md Tahar (2013) Molecular recognition of carbamazepine polymorph. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norazlinda, Hanen (2013) Colour removal of raw carrageenan by using sodium hypochlorite as bleaching agent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norfatin Sahira, Saidi (2013) Physical Characterization on Hydrothermal Carbonization and Torrefaction Product from Wood Fibre Waste. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhafizuddin, Husein @ Yusof (2013) The Study of Multiphase Flow for Petroleum Production Using Computational Fluid Dynamics (CFD). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhashima, Mokhtar (2013) Process Monitoring of CO2 Absorption in Diethanolamine Using Fourier Transform Infrared Spectroscopy (FTIR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Norhayantie, A.Rahman (2013) Total phenolic content and antioxidant activity of some Malaysian herbs. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norita, Abu Kori (2013) Determination of explosion parameters of hydrogen-air mixtures in closed vessel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norzaini, Abd. Rahim (2013) Physicochemical characterization of Ni-Al2O3 and La-promoted Ni-Al2O3 catalyst for methane dry reforming. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nour, A. H. and Azhari, H. Nour (2013) Performance of Ultrasonic Membrane Anaerobic System (UMAS) in Membrane Fouling Control. International Journal of Engineering Science and Innovative Technology (IJESIT), 2 (6). pp. 480-491. ISSN 2319-5967

Nour, A. H. and Ranitha, Mathialagan and Azhari, H. Nour and Ahmad Ziad, Sulaiman (2013) Extraction and Characterization of Essential Oil From Lemongrass (Cymbopogon Citratus) by Microwave-Assisted Hydrodistillation. In: Proceedings of International Conference on Enviromental Protection and Renewable Energy, 6-10 September 2013 , Pattaya, Thailand. pp. 175-161..

Nugroho, Dewayanto and Ruzinah, Isha and Mohd Ridzuan, Nordin (2013) Catalytic Pyrolysis of Palm Oil Decanter Cake using CaO and γ-Al2O3 in Vacuum Fixed Bed Reactor to Produce Bio-oil. In: International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2013), 28-29 August 2013 , Kuantan, Pahang. pp. 1-8..

Nur Afeefa, Mohd Khairi (2013) Antioxidant Activity of Cosmos Caudatus Extracts By Using Different Types of Extraction Methods. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afifah, Hassan (2013) Enhancement of PCA-based fault detection system through utilising dissimilarity matrix for continuous-based process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afifah, Hassan (2013) Enhancement of PCA-based fault detection system through utilising dissimilarity matrix for continuous-based process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aida, Zakiriah (2013) Solid phase transformation of Carbamazepine-Saccharin (CBZ-SAC) co-crystal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Akmalina, Azeman (2013) Production of abe (acetone-butanol-ethanol) from pome by clostridium beijerinckii. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Ashidah, Abdul Satapa (2013) Optimization of yellow pigment production by Monascus purpureus from banana peel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atikah, Che Embee (2013) Development of Polysulfone-Polydimethylsiloxane (Psf Pdms) Thin Film Composite (Tfc) Membrane for Co2/ N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nur Bashirah, Azli (2013) Biodegradable films from poly (lactic acid) (PLA)-chitosan-silver nanoparticles : preparation and characterization. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Farahain, Khusnun (2013) Jatropha oil based bio-adhesive for plywood application. Masters thesis, Universiti Malaysia Pahang.

Nur Farahin, Ishak and Sook, Fun Pang and Noor Intan Shafinas, Muhammad and Nuraini, Mohd Yusoff and Mohd Arman, Abd Kadir and Sazwani, Suhaimi and Hafizah, Ramli and Mohd Faried, Abdullah and Zainal, Giman and Jolius, Gimbun (2013) Extraction of Antioxidant, Flavonoids and Phenolic content from N. Sativa. In: International Conference of Chemical Engineering and Industrial Biotechnology, 28-29 August 2013 , Kuantan, Pahang. pp. 1-2..

Nur Farhanim , Mustaffa (2013) Pyrolysis of agricultural waste: effect of catalyst application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hafizah, Hussin (2013) Demulsification of Crude Oil Emulsions via Microwave Assisted Chemicals (Environmental Friendly). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Hazieqah, Kahil (2013) Modelling of hydrodynamics in Airlift reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Putih Ikhram Ilani, Alias (2013) Production of xylitol by candida krusei using xylose from oil palm empty fruit bunch (opefb) as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuraini, Nurazaman (2013) Photocatalysis of glycerol over Pt/TiO2 catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuraini, Mohd Yusoff and Jolius, Gimbun and M. M., Yusoff (2013) Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer, US, pp. 151-157. ISBN 978-1-4614-6207-1, 978-1-4614-6208-8 (online)

Nuramalina Munirah, Rosli (2013) Evaluation of effectiveness parameters on gas dehydration plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuratiqah, Marsidi (2013) Biological treatment of POME (high acidic content) factorial analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurdinie, Md Baliami (2013) Formulation of wound healing product from keratin protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfarahin, Harun (2013) Microwave Assisted Extraction (MAE) of Castor Oil From Castor Bean. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfariha, Kamaruddin (2013) Development of PVDF/PEG Thin Film Composite Membrane For CO2/N2 Gas Separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfariha Fathmi, Zakaria (2013) Application of ultrasound technique for Steviol Glycosides separation from mixtures of S.Rebaudiana stems and leaves using methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhamizah, Ahmad Zaini (2013) Formulation of Anti-Aging Cream from Keratin Protein. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Nurhamizah, Ibrahim (2013) Effects of drying methods on the antioxidant activities on Benincasa Hispida seed extracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurkhalida, Shahari (2013) Investigating the Effect of Nonionic Surfactant Molecular Weight on Its Drag Reduction Performance. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nursakinah, Mat Saad (2013) Simulation and validation of adsorption process for acrylic acid removal from waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Akma, Reduan (2013) Study on optimum condition in ph solution of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nurul Asmawati, Roslan (2013) Study the effect of operation parameter for monoethanolamine (mea) wastewater treatment using activated carbon, chitosan and rice husk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fadhilah, Roslan (2013) Development of PCA-Based Fault Detection System Based on Various Modes of NOC Models for Continuous-Based Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fahana, Abdul Pattah (2013) Extraction of Lantana Camara for Wound Healing Application. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fatimah, Abdul Basir (2013) Investigating the Effect of Polymer Molecular Weight on Drag Reduction Performance Using Rotating Disk Apparatus (RDA). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Haslin, Adnan (2013) Business Plan for the Production of Fructo-Oligosaccharide. Masters thesis, Universiti Malaysia Pahang.

Nurul Izzah , Ahmad (2013) Characterization and thermostability study of invertase by Aspergillus niger in submerged culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Izzati, Abd Ghalib (2013) Ammonia-N removal using soil mixed culture : factorial analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Mimi Suziana , Abdul Aziz (2013) Investigating the potential of using moringa oleifera husks for bioethanol production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Salwa Azliyana, Hamzah (2013) Chemistry solution study of gaharu water-mixture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Umaira Nisa, Mazelan (2013) Desulfurization of model oil using pyridinium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Umaira Nisa, Mazelan (2013) Desulfurization of model oil using pyridinium-based ionic liquid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulhidayah, Rosli (2013) Simulation on the effect of temperature on forward osmosis process across membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulilliani , Mohd Shukri (2013) Chemical characteristics of carbon nanoparticle converts from wood fiber waste via subcritical liquid and pyrolysis conditions. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang.

Nusaibah, Ghazali (2013) Effect of ultrasound on anaerobic fermentation by Saccharomyces Cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

O

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Effects of Diethyl Ether Additives on Palm Biodiesel Fuel Characteristics and Low Temperature Flow Properties. International Journal of Advanced Science and Technology (IJAST), 52. pp. 111-120. ISSN 2005-4238

Obed M., Ali and R., Mamat and C. K. M., Faizal (2013) Review of the Effects of Additives on Biodiesel Properties, Performance, and Emission Features. Journal of Renewable and Sustainable Energy, 5 (1). ISSN 1941-7012

Oluwasoga, Akindoyo Edward (2013) Introducing a new trio effects portable water treatment plant for rural areas. Masters thesis, Universiti Malaysia Pahang.

P

Pang, Sook Fun (2013) Identification, Extraction and Microencapsulation of Phenolic Compounds from Orthosiphon Stamineus Leaves. Masters thesis, Universiti Malaysia Pahang.

Q

Qurratuaini, Hassanusi (2013) Thermodynamic Study of Propane Dehydrogenation Into Propylene. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

R

R., Ridzuan and Beg, M. D. H. and R. M., Yunus and S., Samahani and M. H., Rohaya and A. A., Astimar and I., Zawawi (2013) Effects of Coupling Agent and Flame Retardant on the Performances of Oil Palm Empty Fruit Bunch Fiber Reinforced Polypropylene Composites. World Academy of Science, Engineering and Technology, 7 (6). pp. 1962-1970. ISSN 2010-3778

Rabiatul Adawiyah, Sharom (2013) Whey protein fractionation using Q-Sepharose anion exchange chromatography and SP-Sepharose cation exchange chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rafiqa Liyana, Rahimi (2013) To study optimum parameters in the soap production derived from palm kernel oil and palm oil by saponification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rajandran, Kanagaraj (2013) Bioethanol production from cassava by fermentation process using Saccharomyces Cerevisiae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Raman, Ashok Kumar Nair (2013) Improvement of cold flow properties of biodiesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Raman, Dinesh Kumar (2013) Optimization and characterization of glycolysis of waste polyethylene terephthalate (PET) with polyethylene glycol (PEG). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ridzuan, Ramli and Khan, Maksudur R. and Chowdhury, Najmul Kabir and Beg, M. D. H. and Rohaya, Mohamed Halim and Astimar, Abdul Aziz and Zawawi, Ibrahim and Nahrul Hayawin, Zainal (2013) Development of Cu Nanoparticle Loaded Oil Palm Fibre Reinforced Nanocomposite. Advances in Nanoparticles, 2. pp. 358-365.

Robiatun Ain, Maidin (2013) Extraction and characterization of gelatine from chicken skin. Faculty Of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosmawati, Naim and Khulbe, K.C. and A. Fauzi, Ismail and T., Matsuura (2013) Characterization of PVDF Hollow Fiber Membrane for CO2 Stripping by Atomic Force Microscopy Analysis. Separation and Purification Technology, 109. pp. 98-106. ISSN 1383-5866

Rosmawati, Naim and A. Fauzi, Ismail (2013) Effect of Polymer Concentration on the Structure and Performance of PEI Hollow Fiber Membrane Contactor for CO2 Stripping. Journal of Hazardous Materials, 250-25. pp. 354-361. ISSN 0304-3894

Rosmawati, Naim and Ahmad Fauzi, Ismail and N. B., Cheer and M. S., Abdullah (2013) Polyvinylidene Fluoride and Polyetherimide Hollow Fiber Membranes for CO2 Stripping in Membrane Contactor. Chemical Engineering Research and Design, 92 (7). pp. 1391-1398. ISSN 0263-8762

Rosmimie, Abdullah (2013) Industrial gas piping system for chemical engineering laboratory Universiti Malaysia Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

S

Said, N. and Zulkarnain, Jema'at and Nurfariha F., Zakaria and Ahmad Z., Sulaiman (2013) Mixtures of S.rebaudiana Leaves and Stems Waste for Steviol g. (Steviosides) Synthesis Using Ethanol-Water Solvents. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-3..

Saidatul Shima, Jamari and Howse, Jonathan R. and Azlinna, A. Bakar (2013) A Morphological Study on the Carbon Particles from Wood Fiber Waste via Hydrothermal Carbonization Process. International Journal of Chemical Engineering and Applications (IJCEA), 4 (3). pp. 149-152. ISSN 2010-0221

Saifuddin , Baharuddin (2013) Investigation on the hybridoma cell requirement of glucose and glutamine concentration for growth. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saima, Said and Abdullah, Ibrahim and Omme, Asma and Muhammad Saad, Khan and Junaid, Akhter (2013) Prince2 Methodology: An Innovative Way for Improving Performance of Malaysian Automotive Industry. Journal of Technology Management and Technopreneurship, 1 (1). pp. 101-116. ISSN 2231-7996

Saleeza Azura , Sulaiman (2013) Extraction of essential oil from Cinnamomum Zeylanicum by various methods as a perfume oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sandaray, Parthiban (2013) Flooding phenomena in two immiscible liquids system : conceptual approach. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sanmugam, Kumanan (2013) Charecterisation of Palm Oil Empty Fruit Bunch (POEFB) fiber via enzyme treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahid , Ali (2013) Activated cement clinker catalyst development for biodiesel production. Masters thesis, Universiti Malaysia Pahang.

Shakaib, M. and S. M. F., Hasani and Haque, M. Ehtesham-ul and Ahmed, Iqbal and R. M., Yunus (2013) A CFD study of heat transfer through spacer channels of membrane distillation modules. Desalination and Water Treatment, 51 (16-18). pp. 3662-3674. ISSN 1944-3994

Sharifah Fathiyah, Sy Mohamad and Shahril, Mohamad and Azila, Abdul Aziz (2013) The Susceptibility of Aphids, Aphis gossypii Glover to Lauric Acid Based Natural Pesticide. Procedia Engineering, 53. pp. 20-28. ISSN 1877-7058

Sharifah Shufiza Khaziri, Tuan Hadi (2013) Performance of red pigment production by Monascus purpureus at different extraction methods. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shazwani , Ibrahim (2013) Effect of drying method on the antioxidant capacity of Cosmos Caudatus extract. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Shiew, Chan Fong (2013) Development of multiple interactions mixed matrix membrane chromatography using lewatit MP500 anion resin and lewatit CNP 105 cation resin for whey protein fractionation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Role of Hydrogen Peroxide (H2O2) Enhanced Anaerobic Co-digestion of Petrochemical Wastewater on Cycle Time Minimization During Biomethanation. Scientific Research and Essay , 8 (22). pp. 996-1009. ISSN 1992-2248

Siew, Kah Weng and Cheng, C. K. and Jolius, Gimbun (2013) Glycerol Dry Reforming Over Alumina-Supported Nickel Catalysts. In: 2nd Postgraduate Colloquium for Environmental Research 2013 (POCER 2013) , 28-29 June 2013 , Awana Hotels and Resorts, Genting Highlands, Pahang. pp. 1-2.. (Unpublished)

Singh, Lakhveer and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Application of Immobilized Upflow Anaerobic Sludge Blanket Reactor Using Clostridium LS2 For Enhanced Biohydrogen Production and Treatment Efficiency of Palm Oil Mill Effluent. Biochemical Engineering Journal, 70. pp. 158-165. ISSN 1369-703X

Singh, Lakhveer and Muhammad Faisal, Siddiqui and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Application of Polyethylene Glycol Immobilized Clostridium sp. LS2 for Continuous Hydrogen Production From Palm Oil Mill Effluent in Upflow Anaerobic Sludge Blanket Reactor. Biochemical Engineering Journal, 70. pp. 158-165. ISSN 1369-703X

Singh, Lakhveer and Siddiqui, Muhammad Faisal and Ahmad, Anwer and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. and Zularisam, A. W. (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Mixed Culture. Journal of Industrial and Engineering Chemistry, 19 (2). pp. 659-664. ISSN 1226-086X

Singh, Lakhveer and Zularisam, A. W. and Siddique, Md. Nurul Islam and Anwar, Ahmad and Mohd Hasbi, Ab. Rahim and Mimi Sakinah, A. M. (2013) Biohydrogen Production from Palm Oil Mill Effluent Using Immobilized Clostridium Butyricum EB6 in Polyethylene Glycol. Process Biochemistry, 48 (2). pp. 294-298. ISSN 1359-5113

Siti Aishah, Muhmed (2013) Quantification of bioactive compounds from Averrhoa Bilimbi. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aisyah, Shamshun Baharin (2013) Study on Optimum Condition of Empty Fruit Bunch (EFB) Based Superabsorbent Polymer Composite. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aisyah Radhiah, Mohamed (2013) Production of beta-keratin from chicken feathers. Masters thesis, Universiti Malaysia Pahang.

Siti Amirah, Nor Effendi (2013) Permeability & characterization study of (polylactic acid) PLA-modified NA+ nanocomposites for packaging application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti At Thahirah, Hasanul Ridza (2013) Temperature effect on polymerization kinetics of polystyrene. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fairun Annisha, Hassan (2013) Absorption study of bis phenol a using molecular imprinted membrane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Siti Faiznur, Daud (2013) Environmental Assessment of Alkali-Catalysed Biodiesel Process Using War Algorithm. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Haizum , Abu Hassan (2013) Moringa oleifera a possible source of biodiesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hajar , Zerry @ Azhari (2013) Study on the effect of ultrasound on cellulose hydrolysis by cellulase. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hatijah, Mortan and Wan Ruhayu, Wan Ramli (2013) Preliminary Study on Factors that Enhanced the Production of Uricase by Aspergillus Flavus. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 513-515. ISSN 2010-3638

Siti Ilyani, Rani and Jolius, Gimbun and B. A., Aziz (2013) Modeling of Gas-Solid Turbulence Flow in Silo. In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), Kuala Lumpur , 25-27 June 2013. pp. 784-798..

Siti Kholijah, Abdul Mudalip and Mohd R., Abu Bakar and Parveen, Jamal and Fatmawati, Adam (2013) Solubility and Dissolution Thermodynamic Data of Mefenamic Acid Crystals in Different Classes of Organic Solvents. Journal of Chemical & Engineering Data, 58 (12). pp. 3447-3452. ISSN 0021-9568

Siti Nafsiah, Mohamed Omar (2013) Production of Xylose from Oil Palm Trunk. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Najibah, Abd Rahman (2013) Comparison of chemical solvent for co2 removal from power plant using amine scrubbing process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Norhaslina, Halim (2013) Synthesis on Bio Reaction Kinetics of Biodiesel Production from Rubber Seed Oil Using Lipase as the Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang .

Siti Nudra Shafinie, Ab Aziz (2013) Determination of Phytochemical in Extracted Punica Granatum Peels and its Efficacy of Healing Burn Injuries. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nur Liyana, Ahamd (2013) Implementing PCA-Based Fault Detection System Based on Selected Imported Variables for Continuous-Based Process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Salbiah, Mutalib (2013) Production of Bioethanol from Kundur [Benincisa Hispida (Thunb) Cogn]. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Sarah , Abdullah (2013) Optimization of enzymatic extraction of stevioside from stevia rebaudiana leaves by using cellulase. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Suhairah, Omar (2013) hermostability of protein in starch derivative emulsion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Zubidah, Jamrus (2013) Methanol production from carbon dioxide by photocatalytic reduction process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Sri Pooveyninthran, Nair (2013) Breast cancer drug delivery systems by differential delivery system using finite element analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sulaiman, S. Z. and Kasmani, R. M. and Mustafa, A. and Mohsin, R. (2013) Effect of Obstacle on Deflagration to Detonation Transition (DDT) in Closed Pipe or Channel–An Overview. Jurnal Teknologi, 66 (1). pp. 49-52. ISSN 2180-3722

Sumaiya, Zainal Abidin and Haigh, Kathleen F. and Vladisavljević, Goran T. and Saha, Basudeb (2013) Comparison Of Novozyme 435 And Purolite D5081 As Heterogeneous Catalysts For The Pretreatment Of Used Cooking Oil For Biodiesel Production. Fuel, 111. pp. 186-193. ISSN 0016-2361

Sunarti, Abd Rahman and A. L., Ahmad (2013) Optimization Studies on TFC Membrane for Membrane Gas Absorption (MGA) Application. In: IOP Conference Series: Materials Science and Engineering, International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013), 9-10 March 2013 , Grand Hyatt, Bandung, Indonesia. pp. 1-15., 46 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Suriati, Ghazali and Mariatti, Jaafar and Azizan, Aziz (2013) Synthesis of Silver Nanoparticles by Chemical Reduction Method and a Comparison Study of Silver-filled Epoxy Thin Film Composites. In: 3rd International Conference on the Advancement of Materials and Nanotechnology 2013 (ICAMN 2013), 19-22 November 2013 , Penang. pp. 1-5..

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Efficient Fuel Pretreatment: Simultaneous Torrefaction and Grinding of Biomass. Energy and Fuels, 27 (12). pp. 7531-7540. ISSN 0887-0624 (Print); 1520-5029 (Online)

Suriyati, Saleh and Hansen, Brian Brun and Jensen, Peter Arendt and Dam-Johansen, Kim (2013) Influence of Biomass Chemical Properties on Torrefaction Characteristics. Energy & Fuels, 27 (12). pp. 7541-7548. ISSN 0887-0624

Suryati, Mohd Mokhtar (2013) Ammonia-N removal using soil mixed culture:kinetic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Syahirah, Razib (2013) Effect of particle size on xylose, glucose and arabinose production from oil palm trunk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Syamsul, Abdullah and Z., Man and L., Ismail and A., Maulud and M. A., Bustam (2013) Ionic Liquids Classification for Fuel Desulphurization. International Journal of General Engineering and Technology (IJGET), 2 (2). pp. 29-38. ISSN 2278-9928

Syamsul, Abdullah and Z., Man and M. A., Bustam (2013) Investigation on Aromaticity Index and Double-Bond Equivalent of Aromatic Compounds and Ionic Liquids for Fuel Desulphurization. Journal of Chemistry. pp. 1-7.

Syazwani, Sapiee (2013) The Extraction of Anthocyanin From Clitoria Ternatea (Blue Pea Flower) by Using Spray Dryer. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Syed Mohd Saufi, Tuan Chik and Fee, Conan J. (2013) Mixed Matrix Membrane Chromatography Based on Hydrophobic Interaction for Whey Protein Fractionation. Journal of Membrane Science, 444. pp. 157-163. ISSN 0376-7388

Sylvia, Philip (2013) Transesterification of Castor Oil to Biodiesel by Using Magnesium Oxide as Solid-Base Catalyst. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

T

Tan, See Ying (2013) Microalgae for tertiary treatment of palm oil mill effluent (pome)- effect of light penetration and kinetic study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan Ni, King (2013) Flow Study on Medium Size Pipeline Testing Loop. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tan Yang, Hong (2013) Catalytic Wet Air Oxidation of Wastewater Containing Acetic Acid. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tatt, Chan Wei (2013) Kinetic study of catalytic glycolysis of PET wastes with zinc acetate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Taufik, Abu Bakar (2013) Conceptual 3D design of batch distillation column by using AVEVA PDMS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tengku Khamanur Azma, Tg. Mohd Zamri (2013) Melastoma malabathricum L . natural preservatives business plan. Masters thesis, Universiti Malaysia Pahang.

Tengku Mohd Nurul Naim, Tengku Jaapar (2013) Photo-reduction of Carbon Dioxide Using Zns Supported Kaolin in a Photo Catalytic Batch Reactor System. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Thaibah , Ali (2013) The optimization of co2 sequestration by microalgae in pome medium. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tharmathas, Alagappan (2013) Microwave assisted thermal cracking of castor oil with zeolite as catalyst for possible biofuel production. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Thivagar, Sugumaran (2013) Use of Carbon Fibers to Enhance the Physical and Mechanical Properties of Wood Composites. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

U

Uddin, M. Rakib and Ferdous, Kaniz and Md. Arifur, Rahman and Anup, K. Roy and Khan, Maksudur R. (2013) Amylatic Activity of Agaricus and Moulds for the Production of Bioethanol. Chemical Engineering and Science, 1 (1). pp. 7-11. ISSN ISSN (Print): 2328-7381 ISSN (Online): 2328-7373

V

Vikinesh, Mariappan (2013) Production of Biodiesel From Microalgae Using Ultrasound. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

W

Wan Mohd Syazwan , Wan Abdullah (2013) Desulfurization of model oil using imidazolium-based ionic liquids. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Najibah, Mohamad (2013) Preparation of Ion Exchange Membrane Chromatography by Modification of Polyethersulfone Membrane Through UV Grafting of [2-(Acryloyloxy) Ethyl] Trimethyl Ammonium Chloride and Acrylic Acid Monomer. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norain, Awang Long (2013) Production of Methane Gas by Ultrasonic Membrane System (UMAS) Using Palm Oil Mill Effluent (POME) as a Substrate. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Nur Atiqah, Wan Yusoff (2013) Biodelinification as Pretreatment to Acid Hydrolysis of Oil Palm Trunk (OPT) : Kinetic Study. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Siti Noorhashimah, Wan Kamaruzaman (2013) A Study of Morphological and Thermal Properties of Polylactic Acid (PLA) Modified MMT (Ion Exchange Method) Nanocomposite. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Wooi Chuan, Tan (2013) Modification of titanium dioxide nanoparticle to enhance the photoactivity in visible light region. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

X

Xuan, Leong Yi (2013) Production and characterisation of roofing materials from natural fibres. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Y

Yee Ket, Chiew (2013) Optimization on acrylic acid plant by using Aspen Plus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ying, Kong Zi (2013) Thermodynamic analysis of methane dry reforming. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Yok, Loke Kam (2013) Optimization of emulsion polymerization of styrene and methyl methacrylate (MMA). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Z

Zaidi, Salim (2013) Application of Process Monitoring Based on Inferential Measurement Approach. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zaitul Aqmal , Mohd Asri (2013) Physical test of stainless steel 316 between different manufactures. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zaman, Haydar U. and A. Khan, Ruhul and A. Khan, Mubarak and Beg, M. D. H. (2013) Physico-Mechanical and Degradation Properties of Biodegradable Photografted Coir Fiber With Acrylic Monomers. Polymer Bulletin, 70 (8). pp. 2277-2290. ISSN 0170-0839(print); 1436-2449(online)

Zamardina, Zainal (2013) Lignin Production from Oil Palm Biomass. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zhu, Lau Mei (2013) Extraction of phenolic compounds and flavonoids compounds from Orthosiphon Stamineus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zularisam, A. W. and Mimi Sakinah, A. M. and Siddique, Md. Nurul Islam (2013) Behaviour of Natural Organic Matter (NOM), Colloidal Particle and Solution Chemistry on Ultra-filtration Performance. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2013), 3-4 December 2013 , Kuantan, Pahang. pp. 1-2..

Zulhafiz, Zulkifli (2013) Study on the adsorption process of monoethanolamine (MEA) wastewater using untreated rice husk and treated rice husk. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zulkarnain, Jema'at (2013) Isolation of Steviol Glycosides from the Mixtures of S.Rebaudiana Stems and Leaves Using Ethanol and Ultrasound Technique. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Zulkiflee, Sulaiman (2013) Effect of mercury concentration and operating parameters to mercury removal using portable mercury removal rig (PMRR) for petrochemical wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zulsyazwan, Ahmad Khushairi (2013) Optimization of Oil Palm Trunk Core Biodelignification Using Pleurotus Ostreatus. Masters thesis, Universiti Malaysia Pahang.

Zuraidah, Mohamad (2013) Copper removal from aqueous solution using Amberlite IR-120 cation exchanger mixed matrix membrane chromatography. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zuriana, Sidi Ahmad (2013) Production of Sorbitol from Meranti Wood Sawdust Using Solid State Fermentation (SSF) Process. Masters thesis, Universiti Malaysia Pahang.

This list was generated on Mon Feb 18 01:55:28 2019 +08.