Items where Division is "Faculty of Mechanical Engineering" and Year is 2012

'Imran, Ahmad Rosdi (2012) Design and investigate the manual sun tracking system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Shamsul Kamar (2012) Design and development of motoraise grinding valve for motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Mohamed (2012) Investigation of filler material to the corrosion behaviour of aluminium alloys weldment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Wahab, Abdul Aziz (2012) Tool wear on parallel turning of carbon steel bar. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Zarif, Abdul Malek (2012) Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah, Adam and R., Mamat and Nur Atiqah, Ramlan and Yoshiyuki, Kidoguchi and Azran, Zafri (2012) Analysis of Straight Vegetable Oil (SVO) Spray Characteristics at End of Injection (EOI). Journal of Medical and Bioengineering, 1 (1). pp. 59-62. ISSN 2301-3796. (Published)

Abdullah Munzir, Zul Safaruddin (2012) Design and fabricate a flexible toilet hose with spool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adam Mohd Izhan, Noor Azam (2012) A comparison study of liquid and vapor phase development at spray boundary of diesel spray, BDF and SVO spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Addy Firdaus, Omar (2012) Investigation of mechanical properties of welded aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aeyzarq Muhammad Hadzreel, Mohd Razali (2012) Effects of alignment of reinforcement material to the properties of Polymer Matrix Composite (PMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afham Bazli, Razali (2012) A study of acoustic emission testing on galvanized iron MIG welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Aiman, Ramlan (2012) Experimental and finite element evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azril, Azmi (2012) Thermodynamic analysis for a six stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Danial, Abdullah (2012) Mechanical properties of dissimilar aluminum-based alloy joints by mig welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muhaimin, Ismail (2012) Design and analysis of wheelchair in term of daily usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Muizz, Ishak (2012) Study of effects of fuel injection pressure on performance for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nasrullah, Norazaman (2012) Analysis on the behaviour of the transient response in turbocharger diesel engine by using simulation / Ahmad Nasrullah Norazaman. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Rasdan, Ismail and Karagaratnana, Shashi Kumar S. A. and Rozli, Zulkifli and Baba, M. Deros and Mohd Nizam A., Rahman (2012) A review on thermal comfort assessment in Malaysian industries. Jurnal Teknologi (Sciences and Engineering), 59 (2). pp. 7-11. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmad Redza, Ahmad Mokhtar (2012) Deposition of high hardness coating by low power atmospheric pressure microwave plasma spray and the characteristics evaluations. Masters thesis, Toyohashi University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Shawal, Mohd Amin (2012) Design and fabrication of pesticide pump sprayer cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syauqi Fathuddin, Md Shaimi (2012) Study on crack interaction effect of API steel using finite element analysis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Syazwan, Mohammad (2012) The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syazwan, Yahya (2012) Effect of heat treatment on erosion-corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zaki, Zaimani (2012) Development hydrogen gas generator for dual fuel engine using yull brown method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alisandra Arieza Fou, Muhd Farid Fou (2012) Surface roughness in lathe boring operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir, Abdul Razak (2012) Library Structure of Dynamic Simulation for Combined Heat and Power Plant in Modelica Language. Applied Mechanics and Materials, 110 (111). pp. 4925-4931. ISSN 1662-7482. (Published)

Amir, Aziz and R., Mamat and Amin, Makeen and Wan Khairuddin, Wan Ali (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012023). ISSN 1757-899X

Amirul, Ramlan (2012) Design and analysis of three wheel prototype car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Azfar, Elias (2012) Optimization and performance analysis of a portable solar cooker system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

At-Tasneem, Mohd Amin and Sallehuddin, Mohamed Haris and Zulkifli, Mohd Nopiah (2012) Stability of a Switched Linear System. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 320-330. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Atiqah, Nafsun (2012) Biodiesel from various vegetables and tallow oils. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Auji, Samsudin (2012) Design and fabrication of a single cylinder diesel engine test platform and it's experimental equipment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azma Salwani, Ab Aziz (2012) Optimization of abrasive machining of ductile cast iron using water based SiO2 nanocoolant : a radial basis function. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrulhafiq, Mohd Azizi (2012) Experimental and analytical evaluation of bending for mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

B. M., Deros and M. F. M., Ali and A., Ismail (2012) Bio-mechanics analysis of instep kicking among Malaysian football players. In: IEEE 2nd International Conference of Southeast Asian Network of Ergonomics Societies (SEANES 2012) , 9-12 July 2012 , Langkawi, Kedah. pp. 1-5. (12997653). ISBN 978-146731734-4

Bagavathi, Krishnan (2012) Investigation of alumina additive in lubricant oil for enhanced engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Benedict, Maurice Lojikip (2012) One dimensional simulation of diesel hydrogen dual fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bindamin, Benjunior (2012) Effect of precipitate hardening treatment on microstructure and mechanical properties of cast aluminum silicon alloy (A356). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Budianto, A. and Kamarul Baharin, Tawi and M., Hussein and Supriyo, Bambang and Ariyono, S. and M. S., Che Kob and Mohd Ezlamy, Zulkifli and Khairuldean, A. K. and Aishah, Daraoh (2012) Microcontroller based proportional derivative plus conditional integral controller for electro-mechanical dual acting pulley continuously variable transmission ratio control. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-14., 36 (1). ISSN 1757-899X

Che Hanisah, Yaacob (2012) Analysis of emulsion fuel spray characteristics using SAC and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Muhammad Ridhwan, Che Hashim (2012) Design, detail analysis and performance testing of uav propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online). (Published)

Dayang Khairunnisa, Abang Kiprawi (2012) Biomechanical loading of instep kick for malaysian footballer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Dinish, Thegaraju (2012) Investigation of biodiesel fuel properties with the dispersion of carbon nanotubes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

F., Basrawi and Takanobu, Yamada and Kimio, Nakanish and Hideaki, Katsumata (2012) Analysis of the Performances of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems (MGT-CGSs) in Middle- and Small-Scale Sewage Treatment Plants: Comparison of Performances and Optimization of Mgts with Various Electrical Power Outputs. Energy, 38. pp. 291-304. ISSN 0360-5442. (Published)

F., Basrawi and Yamada, Takanobu (2012) Energetic and Economic Analysis of a Micro Gas Turbine Cogeneration System in Residential Buildings in a Tropical Region. In: Malaysian Technical Universities Conference on Engineering and Techology , 20-21 November 2012 , Hotel Seri Malaysia, Kangar Perlis. . (Unpublished)

Faiz Aswad, Ayop Azmi (2012) Design and analysis of wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fakir, Md Moslemuddin and S., Basri and M. M., Rahman and R. A., Bakar (2012) Efficient finite element and differential quadrature methods for heat distribution in one-dimensional insulated-tip rectangular fin. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X

Fareez Farhan, Suliman (2012) Welding fault detection using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus, Muhamad (2012) Development of solar oven incorporating thermal energy storage application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firdaus Haikal, Ramli (2012) Design of single cylinder variable compression ratio 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system /. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Gan, Leong Ming (2012) Development of dish-stirling concentrating solar thermal-electric energy conversion system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

H. A., Salaam and Zahari, Taha and Tuan Mohammad Yusoff, Tuan Ya (2012) Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining. Applied Mechanics and Materials, 217-219. pp. 2012-2015. ISSN 1662-7482. (Published)

Hardinnawirda, Kahar (2012) The effect of rice husks as filler in polymer matrix composites. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hariz Sufiyan, Mohamed Sunari (2012) Investigation of machining performance of the PVD coated tungsten carbide by sandblasting pre-treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasfazri, Abdul Rahman (2012) Cylinder by cylinder engine modeling of single cylinder 4 stroke engine for control system development. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazan Idayu, Abdul Halim (2012) Computational analysis of heat conduction in nanowood composite boards. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haziratul Najihah, Othman (2012) Design and analysis of a cloth drying machine by using heat waste. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazwani, Sidik (2012) Prediction of grinding machanability when grinds Haynes 242 using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ho, Ka Hui (2012) Cost reduction study of bicycle by using DFA methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hou, Lo Wei (2012) Optimization of cutting parameters and surface roughness on dry turning of low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ibrahim, Thamir K. and M. M., Rahman (2012) Parametric study of a two-shaft gas turbine cycle model of power plant. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-13., 36 (012024). ISSN 1757-899X

Jamilah, Mustafha (2012) Prediction of grinding machinability when grind aluminium alloy using water based coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

K., Kadirgama and M. M., Rahman and A. R., Ismail and R. A., Bakar (2012) Surrogate Modelling to Predict Surface Roughness and Surface Texture When Grinding AISI 1042 Carbon Steel. Scientific Research and Essay , 7 (5). pp. 598-608. ISSN 1992-2248. (Published)

K., Kadirgama and M. M., Rahman and Bashir, Mohamed and R. A., Bakar and Ahmad Rasdan, Ismail (2012) Development of Temperature Statistical Model when Machining of Aerospace Alloy Materials. Thermal Science InternationalnScientific Journal, 18 (1). pp. 269-282. ISSN 2334-7163. (Published)

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Ibrahim (2012) The effect of corrosion defects on burst pressure of pipelines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azmi, Mohd Mawardzi (2012) Investigation of machining performance of the coated carbide cutting tools with murakami surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Bariah, Mashid (2012) The parametric study of electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Syahmi, Ahmad (2012) Development of round die for press brake machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khalaf I., Hamada and M. M., Rahman and A. Rashid, A. Aziz (2012) Time-averaged Heat Transfer Correlation for Direct Injection Hydrogen Fueled Engine. International Journal of Hydrogen Energy, 37. pp. 19146-19157. ISSN 0360-3199. (Published)

Khalaf Ibrahim, Hamada (2012) A study of the heat transfer in hydrogen fueled internal combustion engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Md. Mustafizur).

Khaliswaran, Keresnan (2012) Development of user interface for vibration measurement. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

L. H., Shah and Bun, T. and Nagata, S. and Shikama, T. (2012) The Effects of Gamma-Ray on the Mechanical Properties of Zr-Based Bulk Metallic Glass. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 713-721. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

L. Syam, Sundar and Kumar, N. T. Ravi and Naik, M. T. and Sharma, K. V. (2012) Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3O4 Magnetic Nanofluid Inside a Plain Tube: An Experimental Study. International Journal of Heat and Mass Transfer, 55 (11-12). pp. 2761-2768. ISSN 0017-9310. (Published)

Lai, Woon Shyz (2012) Prediction of grinding machinability when grind P20 tool steel using TiO2 nanofluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Xue Ni (2012) Detail design of waste plastic bottles rescue boat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Xin Leong (2012) Numerical analysis on simplified 2d model of heart valve leaflets during cardiac cycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Sing Wee (2012) CFD simulation using fluent to determine the heat transfer coefficient of a packed bed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Loh, Wing Liong (2012) Performance of refrigerator operating with and without liquid-suction heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lukman Nul-Hakem, Mohd Yusop (2012) Experimental study of six-stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

M., Ishak and M. I., Rafiquel and M. M., Rahman (2012) Effects of Heat Input on Mechanical Properties of Metal Inert Gas Welded 1.6mm Thick Galvanized Steel Sheet. IOP Conference Series: Materials Science and Engineering, 36 (012011). pp. 1-8. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Fatimah, S. and S. N., Aqida (2012) CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite. IOP Conference Series: Materials Science and Engineering, 36 (012033). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Ishak and Maekawa, Katsuhiro and Yamasaki, Kazuhiko (2012) The Characteristics of Laser Welded Magnesium Alloy Using Silver Nanoparticles as Insert Material. Materials Science and Engineering: A, 536 (February 2012). pp. 143-151. ISSN 0921-5093. (Published)

M., Ishak and Takagi, H. (2012) The Characteristics of Unidirectional Solidified Ni-Al-Mo Alloys = Charakterisierung von unidirektional erstarrten Ni-Al-Mo Legierungen. Materialwissenschaft und Werkstofftechnik = Materials Science and Engineering Technology, 43 (5). pp. 416-420. ISSN 0933-5137. (Published)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2012) Laser Welding of Thin Sheet Magnesium Alloys. In: Nd YAG Laser. Intech Open Access Publisher, pp. 135-157. ISBN 978-953-51-0105-5 (online)

M., Kamal and M. M., Rahman (2012) Study on dynamic behaviour of wishbone suspension system. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012019). ISSN 1757-899X

M., Kamal and M. M., Rahman and Abdul Ghaffar, Abdul Rahman (2012) Fatigue Life Evaluation of Suspension Knuckle Using Multibody Simulation Technique. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 291-300. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and Hutabarat, Windo and Tiwari, Ashutosh (2012) Development of a Tuneable Test Problem Generator for Assembly Sequence Planning and Assembly Line Balancing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). 1900-1913 . (Published)

M. F. M., Yunoh and S., Abdullah and Z. M., Nopiah and M. Z., Nuawi and Nurazima, Ismail (2012) Fatigue feature classification for automotive strain data. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X

M. M., Noor and Andrew P., Wandel and T. F., Yusaf (2012) MILD Combustion: A Technical Review Towards Open Furnace Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 79-100..

M. M., Noor and Wandel, Andrew P. (2012) Numerical Investigation of Influence of Air and Fuel Dilution for Open Furnace MILD Combustion Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. .

M. M., Noor and Wandel, Andrew P. and T. F., Yusaf (2012) A Preliminary Study of Control Parameters for Open Furnace Mild Combustion Using CFD. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . .

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Modelling of The Effect of Air Fuel Ratio on Unburned Hydrocarbons for MILD Combustion. In: 2nd Malaysian Postgraduate Conference , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . .

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) A Review of Mild Combustion and Open Furnace Design Consideration. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 730-754. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. M., Noor and Wandel, Andrew P. and Yusaf, Talal (2012) The Study of Air Fuel Ratio for Open Furnace MILD Combustion of Biogas on Bluff-body Burner. In: Southern Regional Engineering Conference (SREC 2012) , 1-2 September 2012 , Toowoomba, Australia. .

M. M., Noor and A. Aziz, Hairuddin and Wandel, Andrew P. and Yusaf, T. F. (2012) Modelling of non-premixed turbulent combustion of hydrogen using conditional moment closure method. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-17., 36 (1). ISSN 1757-899X

M. M., Rahman (2012) Modeling of Machining Parameters of Ti-6Al-4V for Electric Discharge Machining: A Neural Network Approach. Scientific Research and Essay , 7 (8). pp. 881-890. ISSN 1992-2248. (Published)

M. M., Rahman and Khalaf, I. Hamada and A. Rashid, A. Aziz (2012) Characterization Of The Time-Averaged Overall Heat Transfer In A Direct-Injection Hydrogen-Fueled Engine. International Journal of Hydrogen Energy, 38 (11). pp. 4816-4830. ISSN 0360-3199. (Published)

M. M., Rahman and Khalaf I., Hamada and K., Kadirgama and R. A., Bakar (2012) Cycle Analysis of In-cyclinder Heat Transfer Characteristics for Hydrogen Fueled Engine. Scientific Research and Essay , 7 (8). pp. 891-902. ISSN 1992-2248. (Published)

M. Z., Yusoff and A. M., Mohseen and A., Al-Falahi and N. H., Shuaib (2012) The Effects of Area Contraction on Shock Wave Strength and Peak Pressure in Shock Tube. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 587-596. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

M.A., Mokhri and N.R., Abdullah and S.A., Abdullah and S., Kasalong and R., Mamat (2012) Soot Filtration Recent Simulation Analysis in Diesel Particulate Filter (DPF). Procedia Engineering, 41. pp. 1750-1755. ISSN 1877-7058. (Published)

Madihah, Zubir (2012) Effect of dry machining on tool wear. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahendran, Moorthy and Lee, Giok Chui and Sharma, K. V. and Shahrani, Anuar (2012) Performance Evaluation of Evacuated Tube Solar Collector Using Water-Based Titanium Oxide (TiO2) Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 301-310. ISSN 2231-8380 (online). (Published)

Maisara Mohyeldin, Gasim Mohamed (2012) Six Stroke Engine Arrangement. In: 15th International Conference on Applied Mechanics and Mechanical Engineering , 29-31 May 2012 , Cairo Egypt. .

Maisara Mohyeldin, Gasim Mohamed and Lee, Giok Chui and Khirul Azhar, Anwar (2012) Experimental study on revetec engine cam performance. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-5., 36 (012014). ISSN 1757-899X

Manikam, Ravindran (2012) Study of notch effect on the mechanical properties of modern gas pipeline. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Md. Ashikur, Rahman Khan and M. M., Rahman and K., Kadirgama and A. R., Ismail (2012) RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012016). ISSN 1757-899X

Mohamad Alif, Mohd Nasir (2012) Development of flexural structure for chatter machining testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Azman, Poniran (2012) Temperature distribution and heat flow in cylindrical fin with heat source. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Faza Firdaus, Mohd Rashid (2012) Design and fabrication of display unit for exploded components of single cylinder 4 stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Basrawi (2012) Performance analysis and optimization biogas-fuelled cogeneration systems in sewage treatment plants. PhD thesis, Kitami Institute of Technology, Hokkaido, Japan (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Hushairy, Abdul Jalil (2012) Simulation of performance of air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izwan, Abdul Ghani (2012) Comparison of erosion corrosion of titanium and stainless steel in seawater. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izwan, Ghazali (2012) Design, fabricate and testing small rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Jazmir Hassan, Mohamed (2012) Experimental and finite element evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Normazuan, Mustafa (2012) Design, analysis and fabricate small cross flow turbine for Sungai Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Raja Mohd (2012) Design, fabrication and testing of small scale turbine jet engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sazuan, Sarifudin (2012) Design and analysis of car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zairi, Baharom and M. Z., Nuawi and Priyandoko, Gigih and S. M., Harris (2012) Eddy Current Braking Experiment using Brake Disc from Aluminium Series of A16061 and A17075. IOP Conference Series: Materials Science and Engineering, 36 (1). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Mohamad Zaki, Hamsah (2012) Corrosion behaviour of heat threated carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zulfadli, Mohamad Rani (2012) Determination of burst pressure of defective steel pipes using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Muhammad Adib, Shaharun (2012) Optimization of control parameters for SR in EDM injection flushing type on stainless steel 304 workpiece. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-7., 36 (012044). ISSN 1757-899X

Mohamed Zulqarnain, Mohamed Akram (2012) Ductile fracture strain in uniaxial tensile test of plane specimen’s. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Iskandar, Othman (2012) Analysis of blood flow in 3d heart valve model under steady state condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Naqib Amirul, Abdul Rashid (2012) Development of diesel engines cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Norshim, Mohamed Hashim (2012) Development of solid rocket propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Rafiq, Radzuan (2012) Design and fabricate a gantry type of co2 laser cutting machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Shahidil Saffuan, Rosli (2012) Design and development of android application of bernoulli equation ebook and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd, Yusri and Tsuchiya, Kazuyoshi and Kajiwarad, Kagemasa and Kimura, Minoru (2012) Fluctuation of salivary α-amylase affected by the time change of injection. In: IEEE International Symposium on Micro-NanoMechatronics and Human Science (MHS) 2012 , 4-7 Novemver 2012 , Nagoya, Japan. pp. 24-28.. ISBN 978-1-4673-4813-3

Mohd Abu Zar, Bahri (2012) Improvement of a pre fabricate biogas digester tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adzlan, Mohd Azmi (2012) Experimental & numerical study on sheet metal lateral bending with both ends pinned. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amin, Mad Saad (2012) Design and analysis of modular wheelchair for usage of handicap people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amirul Husaini, Saat (2012) Measurement and numerical simulation of internal air flow in faculty of mechanical engineering admin office ventilation system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asri, Ibrahim (2012) A simplification of reading fluid properties using Microsoft Excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azfadir, Mat Daud (2012) Process damping technique for aluminium alloy at low speed machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azizul Hafiz, Abdul Sani (2012) Mig welding of dissimilar metal (steel and aluminium). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azmi, Sitam (2012) Reduction of diesel exhaust emission by using first stage seawater spray system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azrul Hisham, Mohd Adib and A. R., Ismail and F., Adnan and K., Kadirgama and H. A., Salaam and Zulkifli, Ahmad@Manap and Nasrul Hadi, Johari and Zulfika, Anuar and N. S. N., Azmi (2012) Computational analysis on performance of thermal energy storage (TES) diffuser. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (012015). ISSN 1757-899X

Mohd Azrul Hisham, Mohd Adib and K., Kadirgama and N.H, Mohd Hasni and K., Osman and O., Maskon (2012) Prediction of Blood Flow Velocity and Leaflet Deformation Via 2D Mitral Valve Model. Journal of Mechanical Engineering and Sciences (JMES) , 2, Jun. pp. 217-225. ISSN 2231-8380 . (Published)

Mohd Azrulnizam, Abd. Aziz (2012) Investigation of machining performance of coated alumina cutting tool insert with sand blasting surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Dzulfahizi, Mohamad Saleh (2012) One dimensional engine modeling of single cylinder four stroke engine for different cng injection strategy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhlan, Mohd Yusof and Ummu Kulthum, Jamaludin and S., Abdullah and Z.H., Hanafi and M.S., M. Zain (2012) Monitoring and Assessment of Acoustic Emission Signatures During Fatigue Mechanism of Api5lx70 Gas Pipeline Steel. Journal of Mechanical Engineering and Sciences (JMES), 2 (June 2). 237 -250. ISSN 2231-8380 . (Published)

Mohd Fadzil, Abdul Rahim and M. M., Rahman and R. A., Bakar (2012) Cycle engine modelling of spark ignition engine processes during wide-open throttle (WOT) engine operation running by gasoline fuel. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012041). ISSN 1757-899X

Mohd Fadzli, Mat Lazim (2012) Design and simulation of prechamber with high pressure CNG injector system for single cylinder four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzrul Hisyam, Badarudin (2012) Parametric study on fatique failure using crack initiation method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Jasni (2012) Experimental determination of forced convective heat transfer coefficient with nanofluid in a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faizol Hafiz, Ab Majid (2012) PID controller application on cutting tool vibration in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fazwan, Ishak (2012) Analysis of diesel spray characteristic using single hole SAC nozzle and VCO nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Kamarudin (2012) Analysis of emulsion fuel spray characterictics using optical accessible chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin (2012) Characterization of biodiesel as a fuel in a compression ignition (CI) engine with additives. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizil, Mat Yasin and R., Mamat and K. V., Sharma and Ahmad Fitri, Yusop (2012) Influence of Palm Methyl Ester (PME) as an Alternative Fuel In Multicylinder Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 331-339. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hafizu, Hasan Basri (2012) Experimental and analytical evaluation of bending for stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizul Hakim, Basharudin (2012) Design and fabrication of microwave oven rack at the west station food outlet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hassnun Saiffuddin, Mohd Mustafa (2012) Fabrication of display unit for electrical and electronic wire harness of single cylinder four stroke engine for teaching purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazwan Syafiq, Harun (2012) Analysis of refrigeration system working with nanolubricant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and Mohd Aminuddin, Ayob (2012) An Experimental Study Of Di Diesel Engine Fuelled With Emulsion Fuel. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012 , Melaka, Malaysia. . (Unpublished)

Mohd Idham, Rosman (2012) Investigation of surface modification on aluminum oxide using acid etching surface pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ihsan, Ab Rahim (2012) Fatigue life prediction on heat treated low carbon steel and aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Iqbal, Abd Razak (2012) Investigation of mig welding on dissimilar thickness of metal sheets (steel and stainless steel). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izul Aslam, Mohd Khalit (2012) Investigation of wear behavior of cutting tool insert for ti-alloy machining using carbon coated with sic sandblasting and hf acid pretreatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Kamarulzaman (2012) Design and development of cross flow delta-wing water turbine for Pahang river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Kasmawi, Harun (2012) Joining of plastic by using low power CO2 laser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Na'im, Mohd Ariffin (2012) Effect of velocity in erosion corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Afiq, Nor Hashim (2012) Design and development of high pressure natural gas injector model for single cylinder four stroke engine using matlab simulink. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nur Hilmi, Mohd Nazih (2012) BMM87 bearing load on a brass pin with aluminium plates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurunnajmi, Amat Janji (2012) Camshaft design for a six-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Mohd Rasol (2012) Analysis of diesel particulate matter on single cylinder diesel engine using waste plastic fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rashidi, Maarof and Mohd Hasbullah, Idris (2012) A Study on Conversion of Higher Sulfur Pig Iron to Ductile Iron Using In-Mold Treatment Technique. International Review of Mechanical Engineering, 6 (4). pp. 896-900. ISSN 1970 - 8734. (Published)

Mohd Ridwan, Sulaiman (2012) Modal analysis on dissimilar metal using different thickness (steel and aluminium). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ridzwan, Hj Ramli (2012) Modeling magneto-rheological damper using ANFIS method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rosyazwan Hanif, Ishak (2012) Design and fabrication of jig for butt welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sabarudin, Hj Sulong (2012) Prediction of grinding machining parameters of ductile cast iron using water based zinc oxide nanoparticle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Salleh, Mat Sahat (2012) Design and fabrication of a multi touch screen desktop for multipurpose usage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shafawi, Che Ibrahim (2012) Time � frequency domain analysis of acoustic emission sginal for milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Mohd Hassan (2012) Experimental and numerical study on sheet metal lateral bending with both ends fixed. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syafiq, Mohd Saufi (2012) Effect of specimen size on fracture toughness of mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syah Waliyullah Ad-Dahlawi, Mat Razali (2012) Optimization of abrasive machining of ductile cast iron using water based ZnO nanoparticles : a support vector machine approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syahidan, Mohamed Nawi (2012) Effect of aging on corrosion behaviour of AA6061 aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Zulkipli (2012) Development of a new type of sprayer head of a water mist system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yusri, Shamsuddin (2012) Development of test rig for knee pad. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zafrullah, Zulkifli (2012) Fuzzy PID controller applied on milling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zamri, Mohd Kama (2012) A study of humidity effect toward the quality of air from air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mong, Bee Tong (2012) Outdoor-indoor corrosion of AISI 1010 steel in UMP Pekan. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Amin, Ab Rasak (2012) Design and fabrication of drain cover by casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Arifpin, Mansor and A., Ohsato and S., Sulaiman (2012) Knowledge Management for Maintenance Activities in the Manufacturing Sector. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 612-621. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Muhamad Arifpin, Mansor and L. H., Shah and Hazami, Che Hussain (2012) Maintenance Performance of Malaysia's Automotive Sector: A Case Study. In: Proceedings of International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 271-275..

Muhamad Aslam, Kamarudin (2012) Design and fabrication of go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Azman, Mohd Yamin (2012) Multi dimensional modelling of a high pressure natural gas fuel injection process in prechamber of a single cylinder four-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Azrul, Amir (2012) Effect of solution treatment temperature on microstructure and mechanical properties of a356 alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fadhli, Zainuddin (2012) MIG welding of dissimilar metal using different thicknesses (aluminum and mild steel). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fahrid, Abd Wahid (2012) Design and fabricate of high sensitivity sensor holder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Faizal, Abd Ghani (2012) Comparative study of the strain signal and the edited strain signal. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hafizuddin, Ismail (2012) Design and development of android application of gear design ebook and calculator. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Hanif, Muhamad (2012) Effect of microstructure on plain strain fracture toughness of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Hakimi , Hamid (2012) Computational analysis study of aerodynamic vehicle passenger car (front grill). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Khusairi, Hassim (2012) Finite element analysis of electromagnet actuator for non-contact modal testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Nurzami, Ab Sota (2012) Water injection system design for six stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Sahddam, Mohd Rozani (2012) Perpetual motion magnetic elevation toy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Saiful Zakwan, Ramlan (2012) Effect of pre-strain on mechanical properties of low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Solehin, Daud (2012) Design and analysis of urban concept car chassis for shell eco-marathon challenge. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Mohd Noor (2012) Cost reduction study of automotive part using dfa method : car seat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Adib, Shaharun and Mohamed Reza Zalani, Mohamed Suffian and A. R., Yusoff and Khairul Azha, Abd Jalal (2012) Performance of process damping in machining titanium alloys at low cutting speed with different helix tools. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (1). ISSN 1757-899X

Muhammad Adnin, Mat Bahari (2012) Design, construction, and testing of an open-loop low-speed wind tunnel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq Naquiddin, Abd Rahman (2012) Modeling the magneto- rheological damper using recurrent neural network method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aliff Nazreen, Norazmi (2012) Multiple objective optimization of electrical discharge machining on titanium alloy using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Azwan, Zainol Abidin (2012) Experimental validation for chatter stability prediction. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fadhli, Othman (2012) Design and fabricate gas stove stand and extractor hood stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fahmi , Jasri (2012) Investigation of machining performance of the coated carbide cutting tools with acid etching surface pretreatment. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Faiz Nor, Mohd Fozi (2012) Investigation and experimental work on power generation by piezoelectric devices. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fikri , Md Naziar (2012) Loading on aluminium rivet joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Firdaus, Othman (2012) Design and analysis of urban car for Shell eco marathons Asia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Ramli (2012) Frequency domain analysis on acoustic emission signal in bone tissues. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Azam (2012) Experimental and finite element evaluation of bending for aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafizuddin, Salim (2012) Development of variable intake system for sparkignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ikhwan, Razak (2012) Design and fabrication of steering system for electric go kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Hafiz, Ayub (2012) Design and develop android application of fluid kinematics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Izzat Shazali, Mohd Ramli (2012) Simple damage model for cracked thin plate tensile test. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzuddin, Masrom (2012) Analysis of electromagnetic energy harvester for various length of beam. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Na'im Nasiruddin, Abd Rasidi (2012) Design and development of android application of static fluid e-book and calculator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Naim, Othman (2012) Design and fabrication of a new free and force vibration test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Qaidir, Abdillah (2012) Effect of welding parameters on mechanical properties of welded carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ruzilan, Rusli (2012) Design and fabrication of home drain cover. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Azmi (2012) Optimization of abrasive machining of ductile cast iron using nanoparticles : A multilayer perceptron approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shahmi, Marsahid (2012) A study of acoustic emission properties on welded A240GR 317L stainless steel using acoustic amission transmission under tensile load. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syafik, Isa (2012) Whole body vibration on taxi driver. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Razali (2012) Design and fabricate of micro spray nozzle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaki, Che Md Nor (2012) Experimental and simulation study on the effect of inner span in a four-point bending test (4pb). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulfadhli, Md Zaki (2012) Design and analysis of a composite drive shaft for an automobile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mustafa Saifudeen, Abdul Walid (2012) An analysis of blasius boundary layer solution with different numerical methods. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

N. M. Zuki, N. M. (2012) Decomposition of Manufacturing Processes: A Review. International Journal of Automotive and Mechanical Engineering (IJAME), 5 (Jan. pp. 545-560. ISSN 2229-8648 (Print); 2180-1606 (Online). (Published)

Nabilah, Harmain (2012) Development of solar dryer system for food drying purposes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabilah, Harmain (2012) Development of solar dryer system for food drying purposes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Najiha, M. S. and M. M., Rahman and A. R., Yusoff and K., Kadirgama (2012) Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 768-776. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and M., Kamal and A. R., Yusoff and K., Kadirgama (2012) Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 340-345. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Nasrul Azuan, Alang and Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman (2012) Determination of burst pressure of API steel pipes using stress modified critical strain model. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012025). ISSN 1757-899X

Nasrul Hadi, Johari and Zulkifli, Ahmad@Manap and Syifak Izhar, Hisham (2012) A Quick Glance at Numerical Modeling in Obstructed Human Airway. In: International Conference on Computational Science and Information Management (ICoCSIM) , 3-5 December 2012 , Toba Lake, North Sumatera, Indonesia. pp. 276-280..

Nasrul Hadi, Johari and Kahar, Osman and W. M., Basri and Zamani, Ngali (2012) Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1325-1332., 1440 (1325). ISSN 0094243X

Nazrith, Zulkafli (2012) Experimental and analytical evaluation of bending for aluminum. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Shing Shian (2012) Investigation of MIG welding to the corrosion behaviour of heat treated carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Wai Loon (2012) Investigation of MIG welding to the corrosion behaviour of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohamad Yusof, Nik Mahmud (2012) A study of acoustic emission testing on mild steel MIG welding. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nina Nadia, Sahim (2012) A study of performance analysis of fan coil unit system for FKM's air conditioner. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Aifadilah, Junoh (2012) The effect of number of coils on electromagnetic for energy harvester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noorhidayad, Mohd Noh (2012) Design and fabrication of laboratory printer table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Azmi , Badri (2012) The effect of sodium chloride (NaS1) concentration to corrosion rate. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Norazlianie, Sazali (2012) Experimental & numerical study on sheet metal lateral bending with fixed and pinned ends. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazreen, Samsuri (2012) Fabricate and investigate the performance of the flow-through solar evacuated tube using water-based nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norfariza, Ab. Wahab (2012) Estimation of corrugated cardboard strength with a new tensile or shear test method. Masters thesis, Nagaoka University of Technology (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhaida, Ab. Razak and Ahmad Syahrizan, Sulaiman and Nasrul Azuan, Alang (2012) Interaction effect of pressurized lamination pipe by using 2D finite element analysis. In: IOP Conference Series: Materials Science and Engineering; 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (012027). ISSN 1757-899X

Norhaida, Ab. Razak and Nasrul Azuan, Alang and Khairidz Azuwar, Safie and Ahmad Syahrizan, Sulaiman (2012) Finite element analysis on burst pressure of defective steel pipes. In: 19th European Conference on Fracture (ECF19) , 26-31 August 2012 , Kazan, Russia. pp. 1-9.. (Unpublished)

Norlida, Jamil and A. R., Yusoff and M. M., Hatifi (2012) Literature Review Of Electromagnetic Actuator Force Generation For Dynamic Modal Testing Applications. Journal of Mechanical Engineering and Sciences (JMES) , 3. pp. 311-319. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norsyamsul Syazwan, Mohd Nuji (2012) Analysis of diesel spray characteristic at high pressure injection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsyazwani, Badilah (2012) Effect of radius of fillet on shear stress for cylindrical shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Adjla, Mohamad Hafizin (2012) Study on thickness effects of low carbon steel in rapid cooling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Ain Afiqah, Abdul Latiff (2012) Analysis of diesel particulate matter of single cylinder diesel engine running on tire derivated fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Akmar , Abdul Ariff (2012) Investigation of corrosion effects on galvanized steel-aluminium weld joint. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nur Azhani, Abd Razak and Juliawati, Alias and L. H., Shah and M., Ishak (2012) Effect of Heat Treatment on Corrosion Behaviour of Welded AA6061 Aluminium Alloy in Seawater. In: 15th International Conference on Advances in Materials & Processing Technologies , 23-26 September 2012 , Wollongong, Australia. .

Nur Diyana Wahida, Adam (2012) A simplification of reading thermodynamic properties using microsoft excel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Izzati , Khairuddin (2012) Performance of diesel engine using hydrogen as a fuel. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nuraini, Aziz (2012) Design and modal analysis of flat plate with eccentric hole. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Adrina, Mohd Nasir (2012) Design and fabrication of silicon glue gun. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Ariffah, Hamidi (2012) Design and fabrication of adjustable and portable 4- legs walker. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Asmida, Kamaruddin (2012) Investigation of corrosion effects on aluminum-stainless steel weld joint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Asqi, Md Rashid (2012) Design and fabricate of cat feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Hidayah, Razak (2012) Machining characteristics of hastelloy c-2000 in end milling using artificial intelligence approach. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Nurul Hidayah, Razak and M. M., Rahman and K., Kadirgama (2012) Response surface design model to predict surface roughness when machining hastelloy C-2000 using uncoated carbide insert. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-9., 36 (012022). ISSN 1757-899X

Nurul Hidayati, Salleh (2012) Semi solid metal pouring temperature effects on mechanical properties of Al-Si alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Huda, Baso (2012) Design and development a small stirling engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Omar, Arshad (2012) Effect of constant and varying mixture properties in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

P. Jonga, Rudiyanto and Kahar, Osman and Mohd Azrul Hisham, Mohd Adib (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: AIP Conference Proceedings: The 4th International Meeting Of Advances In Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 604-611., 1440. ISSN 0094-243X

Prabagar, Murukesavan (2012) Computational fluid flow analysis of a side mirror for a passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pramnath, Ravi (2012) Analysis of reduction of particulate matter concentration and size distribution of di diesel engine by seawater spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Puteri Norfazreen, Razali (2012) Development of high efficiency combustor system for industrial furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Qamaruddin, Mohd Fauzi (2012) Design and fabrication of environmental noise reduction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rafidah, Rahim (2012) Performance of biodiesel blends on compression ignition engine. EngD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib (2012) Comparative study of biofuel and biodiesel blend with mineral diesel using one-dimensional simulation. In: 1st International Conference on Mechanical Engineering Research 2011, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-10., 36 (012009). ISSN 1757-899X

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on Diesel Engine Performance Operating With Biodiesel Blend. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 226-236. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rafidah, Rahim and R., Mamat and Mohd Yusof, Taib and Abdul Adam, Abdullah (2012) Influence of Fuel Temperature on a Diesel Engine Performance Operating with Biodiesel Blended. International Journal of Advanced Science and Technology, 43. pp. 115-126. ISSN 2005-4238 . (Published)

Raihan, Abdul Rashid (2012) Study of polypropylene (PP) cartridge filter characteristics and development of liquid filtration system test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ranj, Sirwan and Alghoul, M.A. and K., Sopian and Yusoff, Ali (2012) Thermodynamic Analysis of an Ejector-Flash Tank-Absorption Cooling System. Applied Thermal Engineering, 58 (1-2). pp. 85-97. ISSN 1359-4311. (Published)

Riduan, Abdul Rahman (2012) Noise extraction using frequency domain analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rosliana, Abdul Jalil (2012) Design and fabricate knee walker for malaysian elderly and disable people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

S.Y., Lam and N. H., Shuaib and H., Hasini and N. A., Shuaib (2012) Computational Fluid Dynamics Investigation on the use of Heat Shields for Thermal Management in a Car Underhood. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 785-796. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Saiful Amin, Kamaruddin (2012) Modelling and simulation of skyhook controllersemi-active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sakundarini, Novita and Zahari, Taha and Raja Ariffin, Raja Ghazillaa and Salwa Hanim, Abdul Rashid and Gonzales, Julirose (2012) A framework of integrated recyclability tools for automobile design. International Journal of Industrial Engineering, 19 (10). pp. 401-411. ISSN 1943-670X. (Published)

Sangeetha, Govindasamy (2012) Optimization of grinding parameter when grind haynes 242 using water based titanium oxide (TiO2) nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sellamuthu, Santhana Kumari (2012) Nucleate boiling on prepared surface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahrizal, Ibrahim (2012) Experimental evaluation of heat flow from rectangular fins array under forced convection. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Nor Hafizah , Mohd Sapawi (2012) Effect of erosion corrosion with different fluids mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norazarina, Razali (2012) A study of establishing WBV's profile for bus drivers along Road from East to West Coast of Malaysia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Nur Atikah, Abdullah (2012) A study of whole body vibration exposure for a bus driver along Kuantan to Johor Bharu. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Rabiatull Aisha, Idris and Hardinnawirda, Kahar (2012) Effect of Rice Husks as Filler in Polymer Matrix Composites. Journal of Mechanical Engineering and Sciences (JMES) , 2. pp. 181-186. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini (2012) Effect of Nickel Doping on Interfacial Reaction between Lead-free Solder and Ni-P Substrate. Advanced Materials Research, 488-48. pp. 1375-1379. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman and Ali, Ourdjini and Azmah Hanim, Mohamad Ariff (2012) Effect of Different Aging Temperatures on Interfacial Reaction between SAC305 and ENEPIG Surface Finish. Advanced Materials Research, 415-417. pp. 1181-1185. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Y. T., Chin (2012) Effect of Nickel Addition into Sn-3Ag-0.5Cu on Intermetallic Compound Formation during Soldering on Copper. In: Proceedings of the 35th IEEE/CPMT International Electronics Manufacturing Technology Symposium (IEMT 2012) , 6-8 November 2012 , Kinta Riverfront Hotel, Ipoh, Perak. pp. 1-3..

Sudrajad, Agung and Ismail, Ali and Hazmie, Hamdan and Herzwan, Hamzah (2012) Exhaust emissions of DI diesel engine using unconventional fuels. In: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 425-430., 1440. ISSN 0094-243X

Sudrajad, Agung and Ismail, Ali and Samo, Khalid and Faturachman, Danny (2012) An experimental study of gaseous exhaust emissions of diesel engine using blend of natural fatty acid methyl ester. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X

Suganthi, Jayaraman (2012) Prediction of grinding machinability when grind aluminium alloy using water based zinc oxide nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suziyana, Mat Dahan and Mohd Yusof, Taib and Nurhaizan, Mohd Zainudin and Fadzida, Ismail and Ahmad Nazif, Noor Kamar (2012) Implementation and Analysis of Chemical Hazard Risk Assessment (CHRA) at a Petrochemicals Company, Malaysia. International Journal of Technology Management, 1. pp. 47-56. ISSN 2289-2753. (Published)

Syafiq, Hashim (2012) Investigate the effectiveness of stop drill hole in delaying crack from crack initiation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahmi, Ahmad Ramly (2012) Design of exhaust gas recirculation system (EGR) for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahril Azeem Ong, Haji Maliki Ong (2012) Bearing fault detection using discrete wavelet transform. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syazana, Noorshirwan (2012) Design and fabrication of driver compartment of an electric Go Kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syed Muhammad Adib, Syed Mohd Zaki (2012) Productivity improvement via simulation in manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) Analysis of Laminar Forced Convection of Air for Crossflow Over Two Staggered Flat Tubes. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul-De). pp. 755-767. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2012) A Numerical Study of Forced Convection Heat Transfer Over a Series of Flat Tubes Between Parallel Plates. Journal of Mechanical Engineering and Sciences (JMES), 3. pp. 271-280. ISSN 2231-8380 (online). (Published)

Tan, Ni Yen (2012) Product simplification design improvement by using DFMA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thamir K., Ibrahim and M. M., Rahman (2012) Effect of Comparison Ration on Performance of Combined Cycle Gas Turbine. International Journal of Energy Engineering, 2 (1). pp. 9-14. ISSN 2163-1891 (Print); 2163-1905 (online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2012) Thermal Impact of Operating Conditions on the Performance of a Combined Cycle Gas Turbine. Journal of Applied Research and Technology, 10 (4). pp. 567-577. ISSN 1665-6423. (Published)

Thamir Khalil, Ibrahim (2012) Modeling and performance enhancements of a gas turbine combined cycle power plant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Le Compte, Aaron and Shaw, Geoffrey M. and Desaive, Thomas and Preiser, Jean-Charles (2012) Observation of Incretin Effects During Enteral Feed Transitions of Critically Ill Patients. e-SPEN Journal, 7 (4). pp. 154-159. ISSN 1751-4991. (Published)

Wan Anuar, Wan Hassan and Kahar, Osman and Mohammed Rafiq, Abdul Kadir and Wan Ahmad Kamil, Wan Abdullah and Juhara, Haron and Mohd Zamani, Ngali (2012) Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF). In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 665-670., 1440 (665). ISSN 0094-243X

Wan Hafizee , Wan Zulkiflee (2012) Design and development of noise reduction device for hand drilling machine. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Wan Mohd Ariff, Wan Azli (2012) Single objective optimization of EDM machining on titanium workpiece using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hanif, Othman (2012) Simulation of center location of fluid flow in shear driven cavity using lattice Boltzmann method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hazwan, Wan Ariff (2012) Video imaging study of ethanol- gasoline blends fuel spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Rashdan, Wan Mansor (2012) Development of high pressure spray triggering. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhamad Irfan Hilmi, Wan Harun (2012) Optimization of air intake system for inline-4 diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Hafizi, Wan Hassan (2012) Resistance spot welding of stainless steel and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Shalamyza , Wan Husin (2012) Time domain analyis of acoustic emissions signal for milling process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Widodo Budi, Santoso and R. A., Bakar and Sugeng, Ariyono and Nur, Cholis (2012) Study of Cyclic Variability in Diesel-Hydrogen Dual Fuel Engine Combustion. International Journal of Mechanical & Mechatronics Engineering, 12 (4). pp. 52-56. ISSN 2077-124X. (Published)

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yogeswaran, Muthusamy (2012) Prediction of grinding machinability when grind P20 tool steel using water based ZnO nano-coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yuvarajan Naidu, Thanarajan (2012) Design and fabrication of leak test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Z., Ismail and Z., Ibrahim and Ong, A. Z. C. and A. G. A., Rahman (2012) Approach to reduce the limitations of modal identification in damage detection using limited field data for nondestructive structural health monitoring of a cable-stayed concrete bridge. Journal of Bridge Engineering, 17 (6). pp. 867-875. ISSN 1084-0702. (Published)

Z. A., Abdul Majid and N., Hazali and M. A. K. M., Hanafiah and Abdul Adam, Abdullah and A. F., Ismail and M. H., Ruslan and K., Sopian and M. S., Mohd Azmi (2012) Design and performance of 20 watts portable solar generator. In: 1st International Conference on Mechanical Engineering Research , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-6., 36 (1). ISSN 1757-899X

Z. M., Hafizi and Epaarachchi, J. and Che Ku Eddy Nizwan, Che Ku Husin and Lau, K. T. (2012) Non-velocity based analysis of passive ultrasonic signal for source location detection in composite plates: a pilot study. In: 1st International Conference on Mechanical Engineering Research, ICMER 2011 , 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 1-8., 36 (1). ISSN 1757-899X

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2012) Modal Analysis Of High Frequency Acoustic Signal Approach For Progressive Failure Monitoring In Thin Composite Plates. In: 2nd Malaysian Postgraduate Conference (MPC2012) , 7-9 July 2012 , Bond University, Gold Coast, Queensland, Australia . pp. 61-66..

Zahari, Taha and Soewardi, Hartomo and Siti Zawiah, Md Dawal (2012) Color preference of the Malay population in the design of a virtual environment. In: IEEE 18th International Conference on Virtual Systems and Multimedia: Virtual Systems in the Information Society (VSMM 2012) , 2-5 September 2012 , Milan, Italy. pp. 545-548.. ISBN 978-1-4673-2564-6

Zaihin, Mohd Zahib (2012) Development of bicycle powered water pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zajalara, Mat Lazi (2012) Stress analysis of the various dimensions of the spring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zamani, Ngali and Kahar, Osman and Nasrul Hadi, Johari (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings: 4th International Meeting of Advances in Thermofluids (IMAT 2011) , 3-4 October 2011 , Melaka. pp. 1040-1048., 1440 (1040). ISSN 0094-243X

Zamri, Mohamed and Egab, Laith and Wang, Xu (2012) Tyre Cavity Coupling Resonance and Countermeasures. In: Proceedings of the 4th International Conference on Noise, Vibration and Comfort (NVC 2012) , 26-28 November 2012 , Hotel Melia, Kuala Lumpur. pp. 7-12..

Zamri, Mohamed and Sainty, Samuel and Tawaf, Anthony and Richard, Jonathon and Wang, Xu (2012) Analysis Of Potential Solutions To Audible Tire Cavity And Rim Coupling Resonance Noise. In: ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012 , 19-22 August 2012 , New York City, USA. pp. 15-21..

Zamri, Harun and Mohamad Dali, Isa and Zamri, Mohamed and Shahrum, Abdullah (2012) The Contributions of Professional Engineers at the Instituitions of Higher Learning. Procedia Social and Behavioral Sciences, 102. pp. 221-227. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Zetty Akhtar, Abd Malek (2012) Investigation on weld quality using different filler metals. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zul Shukri, Nawawi (2012) Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulfadli Adha, Nadzri (2012) Design and fabricate welding machine cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulhilmi, Shafie (2012) Design B-Series propeller of traditional fishing vessel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Ahmad@Manap and Ahmad Rasdan, Ismail and Mohd Azrul Hisham, Mohd Adib and Nasrul Hadi, Johari (2012) Probabilistic Analysis of the Human Vertebra Under Compressive Loading. In: 2nd Regional Conference on Applied and Engineering Mathematics 2012 , 30-31 May 2012 , Eastern & Oriental Hotel, Penang, Malaysia . . (Unpublished)

Zulkifli, Nawawi (2012) Vibration investigation for passenger car with different damping characteristics on car suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Ahmad@Manap and A. K., Ariffin (2012) Monte Carlo analysis of the human vertebra based on compressive loading. International Journal of Mechanical & Mechatronics Engineering, 12 (5). pp. 69-73. ISSN 2077-124X. (Published)

Zulqarnain, Fuad (2012) Effect of heat treatment on fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.