Items where Division is "Faculty of Mechanical Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | I | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 251.

A

A., Azidin and Z. A. M., Taib and W. S., Wan Harun and S. A., Che Ghani and M. F. F., Ab Rashid and M. A., Omar and H., Ramli (2015) Investigation of Mechanical Properties for Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A., Rahimi and B., Ghobadian and G., Najafi and F., Jaliliantabar and R., Mamat (2015) Performance and Emission Parameters of Single Cylinder Diesel Engine Using Castor Oil Bio-Diesel Blended Fuels. In: IOP Conference Series: Materials Science and Engineering: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100. ISBN 1757-8981 (print); 1757-899X (online)

A. N., Oumer and M. S., Idris and N. M. M., Ammar and Kurniawan, Tedi (2015) Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene. Advanced Materials Research, 1115. pp. 283-287. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

A. N., Oumer and N. M., Hamidi and Idris, Mat Sahat (2015) Numerical Prediction of Flow Induced Fibers Orientation in Injection Molded Polymer Composites. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

A. R., Razali and M., Ishak and Mohd Azam, Musa and Nazrul Idzham, Kasim and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Autonomous Maintenance in Crankcase Line. Applied Mechanics and Materials, 761. pp. 165-169. ISSN 1662-7482. (Published)

A. R., Razali and M., Ishak and Nazrul Idzham, Kasim and Mohd Azam, Musa (2015) Effect of Magnetic Flux on Rotor-Stator Arrangement of Neodymium Permanent Magnet. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7749-7752. ISSN 1819-6608. (Published)

A. R., Razali and Nazrul Idzham, Kasim and Mohd Azam, Musa and Noraishah, Mohamad Noor and Wan Ahmad Najmuddin, Wan Saidin (2015) Improvement of Overall Equipment Effectiveness (OEE) through Implementation of Total Productive Maintenance (TPM) in Manufacturing Industries. Applied Mechanics and Materials, 761. pp. 180-185. ISSN 1662-7482. (Published)

A. R., Zulhishamuddin and S. N., Aqida (2015) An Overview of High Thermal Conductive Hot Press Forming Die Material Development. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1686-1694. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Agung, Sudrajad and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2015) Analysis of Combustion Characteristics of Waste Plastic Disposal Fuel (WPDF) and Tire Derived Fuel (TDF). Applied Mechanics and Materials, 773 (774). pp. 600-604. ISSN 1662-7482. (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Effect of Temperature on Heat Transfer Coefficient of Titanium Dioxide in Ethylene Glycol-based Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1367-1375. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdul Hamid, K. and Azmi, W. H. and R., Mamat and Usri, N. A. and G., Najafi (2015) Investigation of Al2O3 Nanofluid Viscosity for Different Water/EG Mixture Based. Energy Procedia, 79. pp. 354-359. ISSN 1876-6102 . (Published)

Addie Irawan, Hashim and A. R., Razali and Wan Faizal, Wan Ishak and Mohd Rizal, Arshad and Tan, Yee Yin (2015) Development of Hexaquad Robot: Modeling and Framework. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17506-17513. ISSN 1819-6608. (Published)

Ahmad Fitri, Yusop (2015) Investigation of particulate matter and combustion characteristics of a diesel engine fueled with palm oil methyl ester and diesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Nasser, Mohd Rose (2015) Kerangka kerja untuk pelaksanaan sistem pembuatan lean di perusahaan kecil dan sederhana (PKS) bagi komponen automotif. PhD thesis, Universiti Kebangsaan Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad Rasdan, Ismail and S. N. A., Abdullah and Abdul Adam, Abdullah and B. M., Deros (2015) Whole-Body Vibration Exposure Of Malaysian Taxi Drivers. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2786-2792. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmad Rasdan, Ismail and Siti Nur Atikah, Abdullah and Ahmad Adam, Abdullah and Ab Hamid, Mohd Rashid and Baba, M. Deros (2015) Relationship between thermal comfort and driving performance among Malaysian bus driver. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7406-7411. ISSN 1819-6608. (Published)

Ahmed, Yassin Mustafa and Khidhir, Basim A. and Khairul Saleh, Mohamed Sahari and M., Ishak (2015) Study of Mechanical Properties on Thick Titanium Alloy (Ti - 6Al- 4V) Multi-Passes Weld. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (4). pp. 660-665. ISSN 3159-0040. (Published)

Ahmmad Shukrie, Md Yudin and Shahrani, Anuar and Azri, Alias (2015) Heat Transfer of Alumina Sands in Fluidized Bed Combustor with Novel Circular Edge Segments Air Distributor. Energy Procedia, 75. pp. 1752-1757. ISSN 1876-6102. (Published)

Aishah, Safi and Shahrani, Anuar and Ahmmad Shukrie, Md Yudin and Mohd, Nazani (2015) Electrical energy generation from Malaysia’s annual flood event by using pumped water storage - from crisis to opportunity. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-6.. (Unpublished)

Al-Dabbagh, Jinan B. and Rozman, Mohd Tahar and M., Ishak and Siti Aisyah, Harun (2015) Structural and Phase Formation of TiAl Alloys Synthesized by Mechanical Alloying and Heat Treatment. International Journal Nanoelectronics and Materials, 8. pp. 23-32. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Amir, Aziz and R., Mamat and Wan Khairuddin, Wan Ali and Mohd Rozi, Mohd Perang (2015) Review on Typical Ingredients for Ammonium Perchlorate Based Solid Propellant. Applied Mechanics and Materials, 773/74. pp. 470-475. ISSN 1662-7482. (Published)

Ang, Chan Mun and Hagos, F. Y. and R., Mamat and A. N., Oumer and Azmi, W. H. (2015) Modelling Phase Change Material for Concentrating Energy Storage in Solar Thermal Cooking Stove. In: International Conference on Mechanical Engineering and Advanced Material 2015 , 3-4 December 2015 , Kota Kinabalu, Sabah. pp. 4-11., 1 (1).

Asmara, Y. P. and Siregar, J. P. and L. H., Shah and Cionita, Tezara (2015) Experimental Investigations On Corrosion Model Of Welded 6061 Aluminum Exposed In NaCl Solution. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2600-2607. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Asnul Hadi, Ahmad (2015) Effect of temporal thermal field on quality of semi-solid metal formed components. PhD thesis, Dublin City University (Contributors, UNSPECIFIED: UNSPECIFIED).

Asnul Hadi, Ahmad and Naher, Sumsun and Brabazon, Dermot (2015) Mechanical Properties of Thixoformed 7075 Feedstock Produced Via The Direct Thermal Method. Key Engineering Materials, 651-53. pp. 1569-1574. ISSN 1662-9795. (Published)

Athirah, Razak and Normy Norfiza, A. Razak and Nurhamim, Ahamad and Fatanah, Suhaimi and Ummu Kulthum, Jamaludin (2015) Virtual Trial And Monte Carlo Analysis Of Model-Based Glycaemic Control Protocol With Reduced Nursing Effort. Jurnal Teknologi (Sciences and Engineering), 77 (7). pp. 55-59. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Azmah Hanim, Mohamad Ariff and Ourdjini, Ali and Siti Rabiatull Aisha, Idris and Saliza Azlina, Osman (2015) Thermal Cyclic Test For Sn-4Ag-0.5Cu Solders On High P Ni/Au AND Ni/Pd/Au Surface Finishes. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. .

Azmi, W. H. (2015) Heat transfer augmentation of water based TIO2 AND SIO2 nanofluids in a tube with twisted tape. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

B

B., Ghobadian and G., Najafi and R., Mamat and M., Abbasian (2015) Combustion Parameters of Spark Ignition Engine using Waste Potato Bioethanol and Gasoline Blended Fuels. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012008).

B., Ghobadian and G., Najafi and R., Mamat and M. M., Noor and R., Yahyaee (2015) Performance and Emission Characteristics of a Diesel Engine Fueled with Fish-Oil Biodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Bastian Wibar, Momang and N. M. Zuki, N. M. (2015) Development Concept of A Portable Quality-Confirmation Inspection Device for Automotive Body Parts. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2738-2746. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Beny, Cahyono (2015) Effects of swirl at intake manifold on engine performance using ethanol fuel blend. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Billy, Anak Sup and Mohd Farid, Zainudin and Tanti Zanariah, Shamshir Ali and R. A., Bakar and Gan, Leong Ming (2015) Effect of Rim Angle to the Flux Distribution Diameter in Solar Parabolic Dish Collector. Energy Procedia, 68. pp. 45-52. ISSN 1876-6102 . (Published)

C

C. L., Hoo and Sallehuddin, Mohamed Haris and Edwin, C.Y. Chung and Nik Abdullah, Nik Mohamed (2015) New Integral Antiwindup Scheme for PI Motor Speed Control. Asian Journal of Control, 17 (6). pp. 2115-2132. ISSN 1934-6093. (Published)

C. T., Ann and A. R., Razali and N. A. I., Zainudin and Y. W., Leong (2015) Size Effects in Thin Sheet Metal Forming. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10.. (Unpublished)

C. W., Mohd Noor and R., Mamat and G., Najafi and W. B., Wan Nik and M., Fadhil (2015) Application of Artificial Neural Network for Prediction of Marine Diesel Engine Performance. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (012023). ISSN 1757-8981 (Print); 1757-899X (Online)

Choon, Lih Hoo and Sallehuddin, Mohamed Haris and Edwin Chin, Yau Chung and Nik Abdullah, Nik Mohamed (2015) Steady-State Integral Proportional Integral Controller for PI Motor Speed Controllers. Journal of Power Electronics, 15 (1). pp. 177-189. ISSN 1598-2092. (Published)

Cindy, Olin and Hassan, Ibrahim and Azri, Alias and Ahmmad Shukrie, Md Yudin and F., Basrawi (2015) A Study on a Higher Heating Value of Agricultural Waste in Malaysia. In: World Conference on Engineering & Applied Sciences , 30-31 May 2015 , Kuala Lumpur. . (Unpublished)

D

D., Ramasamy (2015) Improvement of in cylinder airflow using dissimilar valve lift in a compressed natural gas bi-fuel engine. PhD thesis, Universiti Sains Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

D., Ramasamy and K., Kadirgama and M. M., Rahman and Z. A., Zainal (2015) Analysis of Compressed Natural Gas Burn Rate and Flame Propagation on a Sub-Compact Vehicle Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2405-2416. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

F

F., Basrawi and Hassan, Ibrahim and Yamada, Takanobu (2015) Optimal Unit Sizing of Biogas-Fuelled Micro Gas Turbine Cogeneration Systems in a Sewage Treatment Plant. Energy Procedia, 75. pp. 1052-1058. ISSN 1876-6102 . (Published)

F., Basrawi and K., Habib and Hassan, Ibrahim and Lee, Giok Chui (2015) Effect of Solar Fraction on the Economic Performance of a Solar Air Conditioning by an Adsorption Chiller. Jurnal Intelek, 9 (2). pp. 14-20. ISSN 2231-7716. (Published)

F., Basrawi and Thamir K., Ibrahim and Giok, Chui Lee and Khairul, Habib and Hassan, Ibrahim (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. Journal of Solar Energy Engineering, 137 (6). 061009-1. ISSN 0199-6231 (print); 1528-8986 (online). (Published)

F. A., Fauzi and Z., Ghazalli and J. P., Siregar (2015) Effect of Various Fiber Content of Kenaf Fiber on Mechanical Properties of the Composites. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015 , 11-13 October 2015 , Johor Bahru, Johor, Malaysia. pp. 1-7.. (Unpublished)

F. A., Fauzi and Z., Ghazalli and Siregar, J. P. and Zahari, Taha and K., Kadirgama and Nasrul Hadi, Johari (2015) The Investigation of Mechanical Properties on Natural Fiber Composites for Recurve Bow Material Selection. Advances in Environmental Biology, 9 (25). pp. 27-31. ISSN 1995-0756(Print); 1998-1066(Online). (Published)

Fatanah, M. Suhaimi and Chase, J. Geoffrey and Pretty, G. Christopher and Shaw, M. Geoffrey and Normy Norfiza, A. Razak and Ummu Kulthum, Jamaludin (2015) Insulin Sensitivity as a Model-Based Marker for Sepsis Diagnosis. IFAC-PapersOnLine, 48 (20). pp. 372-376. ISSN 2405-8963. (Published)

Fazliana, Fauzun (2015) Experimental and statistical analysis for surface modification of steel and cast iron using Nd:yag laser. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

G

G., Najafi and B., Ghobadian and Talal, Yusaf and Seyed Mohammad, Safieddin Ardebili and R., Mamat (2015) Optimization of Performance and Exhaust Emission Parameters of a SI (Spark Ignition) Engine with Gasoline–ethanol Blended Fuels using Response Surface Methodology. Energy, 90 (Prt 2.). pp. 1815-1829. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Gan, Leong Ming and Gan, Hui Leng and Law, Hoon Chit (2015) Analysis on the Grinding Quality of Palm Oil Fibers By Using A Combined Grinding Equipment. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012047).

Gan, Leong Ming and Law, Hoon Chit and R. A., Bakar (2015) Development of a Briquetting Facility with the Integration of a Hydraulic System for Biomass Densification. Energy and Sustainability V: Special Contributions, 206. pp. 335-345. ISSN 1743-3541. (Published)

Ghanbari, M. and Najafi, G. and Ghobadian, B. and R., Mamat and M. M., Noor and A., Moosavian (2015) Support Vector Machine to predict diesel engine performance and emission parameters fueled with nano-particles additive to diesel fuel. In: 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012069). ISSN 17578981

H

Hagos, F. Y. and A. R. A., Aziz and S. A., Sulaiman (2015) Investigation Of Deposit Formation In Direct-Injection Spark-Ignition Engine Powered On Syngas. International Journal of Automotive Technology (IJAT), 16 (3). pp. 479-485. ISSN 1229-9138 (print);1976-3832 (online). (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman (2015) Methane Enrichment of Syngas (H2/CO) in a Spark-ignition Direct-injection Engine: Combustion, Performance and Emissions Comparison With Syngas and Compressed Natural Gas. Energy, 90 (Prt. 2). pp. 2006-2015. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Hardinnawirda, Kahar and Zetty Akhtar, Abd Malek and Siti Rabiatull Aisha, Idris and M., Ishak (2015) Effect of Cooling and Isothermal Aging on Microstructure Using Electroless Nickel (Boron) Plating. Applied Mechanics and Materials, 695. pp. 352-356. ISSN 1662-7482. (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2015) A Simplified Design of Clamping System and Fixtures for Friction Stir Welding of Aluminium Alloys. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1628-1639. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Hazim, Sharudin and Nik Rosli, Abdullah and A. M. I., Mamat and Obed M., Ali and R., Mamat (2015) An Overview of Spark Ignition Engine Operating on Lower-Higher Molecular Mass Alcohol Blended Gasoline Fuels. Jurnal Teknologi (Sciences and Engineering), 76 (5). pp. 101-105. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Hazwan, Syafiq and A. R., Yusoff and A. M. N., Kamarizan and M. F., Ghazali (2015) Statistical Analysis of Deep Drilling Processs Conditions Using Vibrations and Force Signals. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Hojjat, Damirchi and G., Najafi and Siamak, Alizadehnia and B., Ghobadian and Talal, Yusaf and R., Mamat (2015) Design, Fabrication and Evaluation of Gamma-Type Stirling Engine to Produce Electricity from Biomass for the Micro-CHP System. Energy Procedia, 75. pp. 137-143. ISSN 1876-6102. (Published)

I

I. M., Yusri and R., Mamat and O. M., Ali and A., Aziz and M. K., Akasyah and M. K., Kamarulzaman and C. K., Ihsan and Mahmudul, H. M. and S. M., Rosdi (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fueled with N-butanol Blends. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (012048). ISSN 1757-899X

Ibrahim, Tamir K. and M. M., Rahman (2015) Effects of Isentropic Efficiencies on the Performance of Combined Cycle Power Plants. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2914-2928. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ilva, Arashnia and G., Najafi and B., Ghobadian and Talal, Yusaf and R., Mamat and Maurice, Kettner (2015) Development of Micro-scale Biomass-fuelled CHP System Using Stirling Engine. Energy Procedia, 75. pp. 1108-1113. ISSN 1876-6102 . (Published)

Irnie, Zakaria and Azmi, W. H. and W. A. N., W. Mohamed and R., Mamat and G., Najafi (2015) Experimental Investigation of Thermal Conductivity and Electrical Conductivity of Al2O3 Nanofluid in Water - Ethylene Glycol Mixture for Proton Exchange Membrane Fuel Cell Application. International Communications in Heat and Mass Transfer, 61. pp. 61-68. ISSN 0735-1933. (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan (2015) Numerical Study On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and S. F. A., Talib (2015) Experimental Investigation of Al2O3 - Water Ethylene Glycol Mixture Nanofluid Thermal Behaviour in a Single Cooling Plate for PEM Fuel Cell Application. Energy Procedia, 79. pp. 252-258. ISSN 1876-6102 . (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and R., Saidur and Azmi, W. H. and R., Mamat and K. I., Sainan and H., Ismail (2015) Thermal Analysis On Heat Transfer Enhancement And Fluid Flow for Low Concentration of Al2O3 Water - Ethylene Glycol Mixture Nanofluid in A Single PEMFC Cooling Plate. Energy Procedia, 79. pp. 259-264. ISSN 1876-6102 . (Published)

Irnie, Zakaria and Z., Michael and W. A. N., W. Mohamed and A. M. I., Mamat and Azmi, W. H. and R., Mamat and R., Saidur (2015) A Review of Nanofluid Adoption in Polymer Electrolyte Membrane (PEM) Fuel Cells as an Alternative Coolant. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1351-1366. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Izzuddin, Zaman and Abdurasad, M. R. and Manshoor, B. and Khalid, A. and M. S. M., Sani (2015) Study on Dynamic Behaviour of Grass Trimmer Using Finite Element Analysis. Applied Mechanics and Materials, 786. pp. 383-387. ISSN 1662-7482. (Published)

K

K. H., Koo and M. R. R., Chand and Hassan, Ibrahim and Azizuddin, Abd Aziz and F., Basrawi (2015) Theoretical Analysis on the Effect of Operation Strategies on the Environmental Performance of Micro Gas Turbine Trigeneration System in Tropical Region. Journal of Mechanical Engineering and Automation, 5 (3A). pp. 19-25. ISSN 2163-2405 (Print); 2163-2413 (Online). (Published)

Kashif, Irshad and Khairul, Habib and F., Basrawi and Nagarajan, Thirumalaiswamy and R., Saidur and Bidyut, Baran Saha (2015) Thermal Comfort Study of a Building Equipped with Thermoelectric Air Duct System for Tropical Climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 1359-4311. (Published)

Katanoda, Hiroshi and Mohd Hazwan, Yusof and Morita, Hiromitsu (2015) Energy Separation Mechanism in Unconfined Laminar Compressible Vortex. International Journal of Refrigeration, 59. pp. 115-123. ISSN 0140-7007. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Effect of Titanium Oxide Nanofluid Concentration on Pressure Drop. Journal of Engineering and Applied Sciences, 10 (17). pp. 7815-7820. ISSN 1819-6608. (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and R., Mamat and N. A., Usri and G., Najafi (2015) Viscosity Of AL2O3 Nanofluid in Different Base Mixture Ratio. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama (2015) An Experimental Investigation on Surface Finish in Die-Sinking EDM Of Ti-5Al-2.5Sn. The International Journal of Advanced Manufacturing Technology, 77 (9). pp. 1727-1740. ISSN 0268-3768. (Published)

L

L. C., Wor and M. M., Rahman (2015) Stress Behavior Of Tailor-Welded Blanks For Dissimilar Metals Using Finite Element Method. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2541-2554. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

L. H., Shah and N. F., Zainal Ariffin and M., Ishak and A. R., Razali (2015) Mechanical and Microstructural Characterization of AA6061- AA7075 Dissimilar Friction Stir Welding. In: 6th International Conference on Manufacturing Science and Technology , 1-2 Jun 2015 , Bandar Seri Begawan, Brunei. pp. 1-6.. (Unpublished)

L. H., Shah and Nur Farhana, Zainal Ariffin and A. R., Razali (2015) Parameter Optimization of AA6061-AA7075 Dissimilar Friction Stir Welding using the Taguchi Method. Applied Mechanics and Materials, 695. pp. 20-23. ISSN 1662-7482. (Published)

Lim, Meng Hee and Leong, Mohd Salman and Inayat-Hussain, J. I. and Ngui, Wai Keng (2015) Diagnosis of blade fault based on wavelet scalogram and blade pass vibration signature analysis. Journal of Vibrational Engineering and Technologies, 3 (4). pp. 497-512. ISSN 2321-3558. (Published)

Lingenthiran, Samylingam (2015) Mechanical and physical properties of kenaf fibre reinforced thermoplastic elastomer composites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

M

M., Ghafoori and B., Ghobadian and G., Najafi and M., Layeghi and A., Rashidi and R., Mamat (2015) Effect of Nano-Particles on the Performance and Emission of a Diesel Engine using Biodiesel-Diesel Blend. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3097-3109. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor (2015) Performance and Emission Characteristics of a Ci Engine Fueled With Nanodiesel. In: International Conference On Mechanical Engineering Research (ICMER) 2015 , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

M., Ghanbari and G., Najafi and B., Ghobadian and R., Mamat and M. M., Noor and A., Moosavian (2015) Adaptive Neuro-Fuzzy Inference System (Anfis) to Predict Ci Engine Parameters Fueled with Nano-Particles Additive to Diesel Fuel. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference of Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012070). ISSN 1757-8981 (Print); 1757-899X (Online)

M., Hazim and L., Chee Wai and G., Devandran and M., Khalid and M., Hanis (2015) Design and Development of Five Parallel Engines for Lubricantsand Fuel Testing Experimental Rigs, Part 3. In: 2 nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-18..

M., Ishak and A. S. K., Razali and N. F. M., Noordin and L. H. A., Shah and F. R. M., Romlay (2015) The Effect of Filler on Weld Metal Structure of AA6061 Aluminum Alloy by Tungsten Inert Gas (TIG). In: International Conference on Automotive Innovation and Green Energy Vehicle 2014 , 26-27 August 2014 , Kuantan, Pahang. , 11 (1). ISSN 22298649

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Hardness Effect of Friction Stir Welding by MILKO 37 Milling Machine. In: AIP Conference Proceeding 1660, 070096 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28–30 May 2014 , Penang, Malaysia. pp. 1-6..

M., Ishak and M. A. H. M., Jasri and M., Afendi and A., Ismail (2015) The Microstructure of Aluminum A5083 Butt Joint by Friction Stir Welding. In: AIP Conference Proceeding 1660 : International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 12-14 August 2014 , MS Garden Hotel, Kuantan. pp. 1-9..

M., Ishak and M. N. M., Salleh and F. R. M., Romlay (2015) A Study on Bead on Plate Welding of AA7075 By Low Power Fiber Laser. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-9.. (Unpublished)

M., Ishak and N. F. M., Noordin and A. S. K., Razali and L. H., Shah and F. R. M., Romlay (2015) Effect Of Filler On Weld Metal Structure Of AA6061 Aluminum Alloy By Tungsten Inert Gas Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2438-2446. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER4043 and ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and Ahmad Syazwan, Kamil Razali and L. H., Shah (2015) The Effect of Filler ER5356 on Weld Metal Structure of 6061 Aluminium Alloy by Metal Inert Gas (MIG). International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-7. ISSN 2289-697X. (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Feasibility Study on Joining Dissimilar Aluminum Alloys AA6061 and AA7075 by Tungsten Inert Gas (TIG). Jurnal Teknologi (Sciences and Engineering), 75 (7). pp. 79-84. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M., Ishak and Nur Fakhriah, Mohd Noordin and L. H., Shah (2015) Parametric Studies on Tensile Strength in Joining AA6061-T6 and AA7075-T6 by Gas Metal Arc Welding Process. IOP Conference Series: Materials Science and Engineering, 100 (012042). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

M., Jusop and M. F. F., Ab Rashid (2015) A Review on Simple Assembly Line Balancing Type-e problem. In: IOP Conference Series: Materials Science and Engineering : 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9., 100 (1). ISBN 1757-899X

M., Kaamal and M. M., Rahman (2015) Dual-Criteria Method For Determining Critical Plane Orientation For Multiaxial Fatigue Prediction Using A Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2571-2581. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) Fatigue Life Estimation Based On Continuum Mechanics Theory With Application Of Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2586-2598. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Kamal and M. M., Rahman (2015) An Integrated Approach For Fatigue Life Estimation Based On Continuum Mechanics Theory And Genetic Algorithm. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2756-2770. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M., Yogeswaran and K., Kadirgama and M. M., Rahman and D., Ramasamy (2015) Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2272-2281. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. F. F., Ab Rashid (2015) An Improved Mathematical Model to Predict Surface Roughness Using Hybrid Method. International Journal of Materials, Mechanics and Manufacturing, 3 (1). pp. 36-39. ISSN 1793-8198. (Published)

M. F. F., Ab Rashid and N. M. Z., Nik Mohamed and A. N., Mohd Rose and S. A., Che Ghani and W. S., Wan Harun (2015) Implementation of Ant Colony Optimization Algorithm to Minimize Cost of Turning Process. Applied Mechanics and Materials, 695. pp. 558-561. ISSN 1662-7482. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N., Mohd Rose (2015) Simulation Study of a Vehicle Production Line for Productivity Improvement. Journal of Mechanical Engineering and Sciences (JMES) , 8. pp. 1283-1292. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and A. N. M., Rose (2015) Optimization of Traveling Salesman Problem with Precedence Constraint using Particle Swarm Optimization. Journal of Scienctific Research & Development , 2 (13). pp. 212-216. ISSN 1115-7569. (Published)

M. H., Lim and W. K., Ngui (2015) Diagnosis of Twisted Blade in Rotor System. In: The 22nd International Congress on Sound and Vibration , 12-16 July 2015 , Italy. pp. 1-7.. (Unpublished)

M. H. M., Yasin and R., Mamat and A., Aziz and Ahmad Fitri, Yusop and M. H., Ali (2015) Investigation on Combustion Parameters of Palm Biodiesel Operating with a Diesel Engine. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1714-1726. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Kh., Abdolbaqi and Azmi, W. H. and R., Mamat (2015) Computational Fluid Dynamics Study of Heat Transfer Enhancement in a Circular Tube using Nanofluid. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-6. ISSN 2289-697X. (Published)

M. Kh., Abdolbaqi and C. S. N., Azwadi and R., Mamat and Azmi, W. H. and G., Najafi (2015) Nanofluids Heat Transfer Enhancement Through Straight Channel Under Turbulent Flow. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2294-2305. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and Numerical Study of Thermo-Hydraulic Performance of Circumferentially Ribbed Tube with Al2O3 Nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. Kh., Abdolbaqi and Nor Azwadi, Che Sidik and R., Mamat and Azmi, W. H. (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69. pp. 34-40. ISSN 0735-1933. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama (2015) A Review on Homogeneous Charge Compression Ignition Engine Performance using Biodiesel–Diesel Blend as a Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2199-2211. ISSN 1985-9325(Print); 2180-1606(Online). (Published)

M. M., Rahman and D., Ramasamy and K., Kadirgama and M. R., Shukri (2015) Artificial Neural Network Optimization Modeling On Engine Performance Of Diesel Engine Using Biodiesel Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2332-2347. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. M., Rahman and K., Kadirgama and M. M., Noor (2015) Material Removal Rate and Surface Roughness on Grinding of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2471-2483. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

M. R. M., Akramin and M. S., Shaari and A. K., Ariffin and Masanori, Kikuchi and S., Abdullah (2015) Surface Crack Analysis Under Cyclic Loads Using Probabilistic S-Version Finite Element Model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37 (6). pp. 1851-1865. ISSN 1806-3691. (Published)

M. R. M., Rejab and S. H. S. M., Fadzullah and K. A., Kamarudin and F., Mat (2015) Numerical Modelling of Triangular Corrugated-core Sandwich Panel subjected to Impact Loading. In: Proceeding Book MUCET 2014: Engineering & Technology , 10-11 November 2014 , Mahkota Hotel Bandar Hilir Melaka. pp. 374-378., 1.

M. Rafiqul, Islam (2015) An experimental study and modeling on gas metal arc welded lap joint of A7075-T651 aluminium alloy to AZ31B magnesium alloy. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

M. S. M., Sani and Izzuddin, Zaman and M. M., Rahman (2015) Analysis of Split Air Conditioner Noise using Sound Intensity Mapping. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 28-33. ISSN 2289-7879. (Published)

M. S. M., Sani and M. M., Rahman and M. Z., Baharom and I., Zaman (2015) Sound Intensity Mapping of an Engine Dynamometer. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2820-2829. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. S. M., Sani and Muhamad Norhisham, Abdul Rani and Mohd Azmi, Yunus and Ahmad Azlan, Mat Isa and Liyana, Roslan (2015) Force Appropriation Method for Two Degrees of Freedom Nonlinear System. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 5-9. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

M. Y., Taib and Shahrani, Anuar and Hassan, Ibrahim (2015) A Review of Ground Heat Exchangers for Cooling Application in the Malaysian Climate. Journal of Mechanical Engineering and Sciences (JMES), 8. pp. 1426-1439. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mahgoub, B. K. M. and Sulaiman, S. A. and Karim, Z. A. A. and Hagos, F. Y. (2015) Experimental Study on the Effect of Varying Syngas Composition on the Emissions of Dual Fuel CI Engine Operating at Various Engine Speeds. IOP Conference Series: Materials Science and Engineering, 100 (012006). pp. 1-9. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Makeen, Mohd Amin and M. F., Ghazali (2015) Leakage Detection in Galvanized Iron Pipelines using Ensemble Empirical Mode Decomposition Analysis. In: AIP Conference Proceedings: International Conference on Mathematics, Engineering and Industrial Applications (ICoMEIA 2014) , 28-30 May 2014 , Penang, Malaysia. pp. 1-5., 1660 (070003). ISBN 978-0-7354-1304-7

Makeen, Mohd Amin and M. F., Ghazali and N. F., Adnan (2015) Leak Detection in Medium Density Polyethylene (MDPE) Pipe Using Pressure Transient Method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-6., 100 (012007). ISSN 1757-899X

Mas Ayu, Hassan (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mas Ayu, Hassan and S., Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Salwani, Mohd Salleh and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and G., Krishnamurithy and T., Tamarul (2015) The Effects of Oxide Layer on Co-Cr-Mo: Preliminary Study In-vitro. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

Mas Ayu, Hassan and Sudin, Izman and Mohammed Rafiq, Abdul Kadir and R., Daud and Mohd Faiz, Mohd Yusoff and Mahmood, Anwar and A., Shah (2015) Creating Oxide Interlayer Through Thermal Oxidation Improves Adhesion Strength Of Hydroxyapatite Coating on Co-Cr-Mo Substrates. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Seoul, Korea. . (Unpublished)

Masood, Kamal (2015) A new hybrid multiaxial fatigue life model based on critical plane continuum damage mechanics and genetic algorithm. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Mustafizur, Rahman).

Mathivanan, D. B. and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Tezara, C. (2015) Effect of Fibre Loading on the Flexural Properties of Natural Fibre Reinforced Polymer Composites. Applied Mechanics and Materials, 695. pp. 1-4. ISSN 1662-7482. (Published)

Mofijur, M. and Masjuki, H. H. and Kalam, Md. Abul and Rahman, S. M. Ashrafur and Mahmudul, H. M. (2015) Energy Scenario and Biofuel Policies and Targets in ASEAN Countries. Renewable and Sustainable Energy Reviews, 46. pp. 51-61. ISSN 1364-0321. (Published)

Mohamad Rusdi, Abdul Rahman and L. H., Shah and M., Ishak (2015) Parameter Optimization of Preheating Method on Aluminium Stainless Steel Metal Inert Gas (MIG) Dissimilar Welding. Applied Mechanics and Materials, 773-74. pp. 253-256. ISSN 1662-7482. (Published)

Mohamad Zairi, Baharom and Priyandoko, Gigih and F. R. M., Romlay and M. S. M., Sani and M. S., Salleh and M. H. M., Yusof (2015) Voltage Induced Effect for Vibration Suppression Using Eddy Current on Power Steering System. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7482-7487. ISSN 1819-6608. (Published)

Mohamed, Mohamed Ackiel and Manurung, Yupiter HP and L. H., Shah and Nurul Hidayah, Othman (2015) Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding. In: 68th IW International Conference High-Strength Materials , 2-3 July 2015 , Helsinki, Finland. pp. 1-8..

Mohammad Akmal, Akashah and R., Mamat and Abdul Adam, Abdullah and A., Aziz and H. M., Yassin (2015) Effect Of Ambient Temperature On Diesel-Engine Combustion Characteristics Operating With Alcohol Fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2373-2382. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Effect of Injection Hole Diameter on Operational Conditions of Common-Rail Fuel-Injection System for Portinjection Hydrogen-Fueled Engine. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2383-2395. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohammed, Kamil and M. M., Rahman (2015) Performance Prediction of Spark-Ignition Engine Running on Gasoline-hydrogen and Methane-hydrogen Blends. Applied Energy, 158. pp. 556-567. ISSN 0306-2619. (Published)

Mohd Azraai, M. Razman and Priyandoko, Gigih and A. R., Yusoff and M. F. F., Ab Rashid (2015) Parametric Optimization Of Magneto-Rheological Fluid Damper Using Particle Swarm Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2591-2599. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Bakar, Mohd Mishani and Ong, Zhi Chao and Chong, Wen Tong and Khoo, Shin Yee and Abdul Ghaffar, Abdul Rahman (2015) A Simplified Technique to Distinguish Unbalance and Misalignment Using Frequency Domain Operating Deflection Shape. Jurnal Teknologi (Sciences and Engineering), 76 (8). pp. 1-4. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Tanti Zanariah, Shamshir Ali and Billy, Anak Sup (2015) Design and Stress Simulation of Crankshaft for Slider Crank-Drive Stirling Engine. Applied Mechanics and Materials, 699. pp. 678-683. ISSN 1662-7482. (Published)

Mohd Farid, Zainudin and R. A., Bakar and Gan, Leong Ming and Billy, Anak Sup (2015) Thermodynamic Cycle Evaluation of Rhombic Drive Beta-configuration Stirling Engine. In: Energy Procedia, Vol. 68, 2nd International Conference on Sustainable Energy Engineering and Application (ICSEEA 2014) , 14-15 Oktober 2014 , Bandung, Indonesia. pp. 419-428., 68. ISSN 1876-6102

Mohd Fawzi, Zamri and A. R., Yusoff (2015) Heuristic Optimization of Cooling Channel Design in the Hot Stamping Die for Hot Stamping Process. Advances in Materials and Processing Technologies, 1 (1-2). pp. 27-35. ISSN 2374-068X (Print), 2374-0698 (Online). (Published)

Mohd Hafizi, Mohammad Yusoff and N. M. M., Ammar and Idris, Mat Sahat (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS) 2014 Vol II , 12-14 March 2014 , Hong Kong. .

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Ahmad Fitri, Yusop and G., Najafi and Azri, Alias (2015) Effect of Low Proportion Palm Biodiesel Blend on Performance, Combustion and Emission Characteristics of a Diesel Engine. Energy Procedia, 75. pp. 92-98. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and Perowansa, Paruka and R., Mamat and Mohd Hafiz, Ali (2015) Fundamental Study of Dual Fuel on Exhaust Gas Recirculation (EGR) Operating with a Diesel Engine. Applied Mechanics and Materials, 773. pp. 415-419. ISSN 1662-7482. (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Amir, Aziz and G., Najafi (2015) Comparative Study on Biodiesel-Methanol-Diesel Low Proportion Blends Operating with a Diesel Engine. Energy Procedia, 75. pp. 10-16. ISSN 1876-6102 . (Published)

Mohd Hafizil, Mat Yasin and R., Mamat and Ahmad Fitri, Yusop and Perowansa, Paruka and Talal, Yusaf and G., Najafi (2015) Effects of Exhaust Gas Recirculation (EGR) on a Diesel Engine Fuelled with Palm-Biodiesel. Energy Procedia, 75. pp. 30-36. ISSN 1876-6102 . (Published)

Mohd Jamil Mohamed, Mokhtarudin and Payne, S. J. (2015) Mathematical Model of the Effect of Ischemia–reperfusion on Brain Capillary Collapse and Tissue Swelling. Mathematical Biosciences, 263. pp. 111-120. ISSN 0025-5564. (Published)

Mohd Rashidi, Maarof (2015) Effect of magnesium addition on the microstructure and properties of ductile Ni-resist alloy using in-mould magnesium treatment method. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Razali, Hanipah and R., Mikalsen and A. P., Roskilly (2015) Recent Commercial Free-Piston Engine Developments for Automotive Applications. Applied Thermal Engineering, 75. pp. 493-503. ISSN 1359-4311. (Published)

Mohd Razali, Hanipah (2015) Development of a spark ignition free-piston engine generator. PhD thesis, Newcastle University (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Yusof, Taib and Azim, Arshad and Suziyana, Mat Dahan and F., Basrawi (2015) Experimental Study of a Domestic Refrigerator with POE-AI2O3 Nanolubricant. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2243-2252. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd. Herzwan, Hamzah (2015) An experimental study on performance of diesel engine operating with waste tire and waste plastic derived fuel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Muhammad Adib, Shaharun (2015) Effect of variable helix and pitch tool geometries on process damping performance in endmilling process. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Azim, Azizi and Ahmad Kamal Ariffin, Mohd Ihsan and Nik Abdullah, Nik Mohamed (2015) The Peridynamic Model of Viscoelastic Creep and Recovery. Multidiscipline Modeling in Materials and Structures, 11 (4). pp. 579-597. ISSN 1573-6105. (Published)

Muhammad Shahrin, Sabri and M. M. A., Rahman and F. T., Suhaimi and A. S., Ngah and A., Aseli and Muhammad Fazrul Qazwan, Mohd Zaki (2015) Design and Development of Test Rig for Conversion of Pure Bio Oil Onto Biodiesel for Internal Combustion Engine Using Acidic (Esterification) Method and Alkaline (Trans-Esterification) Method. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 Dec 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14..

N

N., Ismail and M. F. M., Yusof and C. K. E., Nizwan and S., Abdullah (2015) On the Need of the Wavelet Analysis for Fatigue Condition Monitoring. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Forced Convection Heat Transfer Using Water-Ethylene Glycol (60:40) Based Nanofluids in Automotive Cooling System. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2747-2755. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2015) Thermal Conductivity Enhancement of Al2O3 Nanofluid in Ethylene Glycol and Water Mixture. Energy Procedia, 79. pp. 397-402. ISSN 1876-6102 . (Published)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Effect of Aluminium Oxide Nanoparticles Suspended in Different Eg-Base Ratio to Enhanced Thermal Conductivity. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. A., Usri and Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid and G., Najafi (2015) Experimental Studies on Convective Heat Transfer Performance Using Ethylene Glycol Based Nanofluid. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

N. A. A., Sathari and A. R., Razali and M., Ishak and L. H., Shah (2015) Mechanical Strength Of Dissimilar AA7075 and AA6061 Aluminum Alloys Using Friction Stir Welding. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2713-2721. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. F., Adnan and M. F., Ghazali (2015) Detecting Leak in Gas Pipeline using Continuous Wavelet Transform and Kurtosis. In: Proceeding Book Mucet 2014 : Engineering & Technology. Universiti Teknikal Malaysia Melaka (UTeM), Melaka, pp. 347-351. ISBN 978-967-0257-53-2

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection In Gas Pipeline by Acoustic and Signal Processing – A Review. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

N. F., Adnan and M. F., Ghazali and Makeen, Mohd Amin and A. M. A., Hamat (2015) Leak Detection in Gas Pipeline using Hilbert-Huang Transform. Applied Mechanics and Materials, 815. pp. 403-407. ISSN 1662-7482. (Published)

N. M. S., Abd Malek and S. R., Mohamed and S. A., Che Ghani and W. S., Wan Harun (2015) Critical Evaluation on Structural Stiffness of Porous Cellular Structure of Cobalt Chromium Alloy. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10., 100 (1).

N. M. Zuki, N. M. and Mohd Kamal, Mohd Nawawi and Adam Shariff Adli, Aminuddin (2015) Hybrid Knowledge-Based System for Collaborative Green Automotive Manufacturing Management. Applied Mechanics and Materials, 752/53. pp. 1333-1338. ISSN 1662-7482. (Published)

N. N., Razak and A. A., Razak and C. G., Pretty and N. H., Ahamad and F. M., Suhaimi and U., Jamaluddin (2015) Virtual Trial Protocol Analysis of Nursing Workload Intensity within ICU. International Conference for Innovation in Biomedical Engineering and Life Sciences, 56. pp. 294-297. ISSN 1680-0737. (Published)

N. S. M., Sahid and M. M., Rahman and K., Kadirgama (2015) Neural Network Modeling Of Grinding Parameters Of Ductile Cast Iron Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2608-2621. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

N. S. M., Shalahim and Siti Zawiah, M. D. and Case, Keith (2015) The Relationship Between Anthropometry and Hand Grip Strength Among Elderly Malaysians. International Journal of Industrial Ergonomics, 50. pp. 17-25. ISSN 0169-8141. (Published)

Najiha, M. S. and M. M., Rahman (2015) Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2771-2785. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (Published)

Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) with Nanofluid MQL Environment using Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online). (In Press / Online First) (In Press / Online First)

Najiha, M. S. and M. M., Rahman and K., Kadirgama (2015) Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2699-2712. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najiha, M. S. and M. M., Rahman and K., Kadirgama and M. M., Noor and D., Ramasamy (2015) Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3003-3017. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Najihah, Mohamed and M. M., Rahman and K., Kadirgama (2015) Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2722-2737. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Nor Azwadi, Che Sidik and Muhammad Noor Afiq Witri, Mohd Yazid and R., Mamat (2015) A Review on the Application of Nanofluids in Vehicle Engine Cooling System. International Communications in Heat and Mass Transfer, 68. pp. 85-90. ISSN 0735-1933. (Published)

Nor Azwadi, Che Sidik and R., Mamat (2015) Recent Progress on Lattice Boltzmann Simulation of Nanofluids: A review. International Communications in Heat and Mass Transfer, 66. pp. 11-22. ISSN 0735-1933. (Published)

Norasyikin, Ismail (2015) Syngas production from microwave plasma gasification of oil palm char. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali (2015) Computational Analysis of Thermal Building in a No-uniform Thermal Environment. Energy Procedia, 68. pp. 438-445. ISSN 1876-6102 . (Published)

Norfadzilah, Jusoh and R. A., Bakar and Ahmad Rasdan, Ismail and Tanti Zanariah, Shamshir Ali and Shamshir, Ali and Farrah Wahida, Mustafar (2015) The Impact of Thermal History on Buildings Occupants’ Thermal Assessments in Air-Conditioned Office Buildings. Journal of Advanced & Applied Sciences (JAAS), 3 (5). pp. 159-168. ISSN 2289-6260. (Published)

Norlida, Jamil (2015) Electromagnetic force generation for dynamic modal testing applications. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Atiqah, Ramlan and Abdul Adam, Abdullah and Mohd Herzwan, Hamzah and Nur Fauziah, Jaharudin and R., Mamat (2015) Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 425-429. ISSN 1662-7482. (Published)

Nur Atiqah , Ramlan (2015) A study on diesel engine performance using biodiesel from waste cooking oil (WCO). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fauziah, Jaharudin (2015) Analysis of particulate matter emission in diesel engine operated with waste cooking oil biodiesel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdullah, Abdul Adam).

Nur Fauziah, Jaharudin and Nur Atiqah, Ramlan and Mohd Herzwan, Hamzah and Abdul Adam, Abdullah and R., Mamat (2015) Study on Particulate Matter of Diesel Engine Using Waste Cooking Oil. Applied Mechanics and Materials, 773. pp. 420-424. ISSN 1662-7482. (Published)

Nurul Hidayah, Othman and L. H., Shah and M., Ishak (2015) Mechanical and Microstructural Characterization of Single and Double Pass Aluminum AA6061 Friction Stir Weld Joints. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-8., 100 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Nurul Suraya, Azahari and N. M. M., Ammar and Ummu Kulthum, Jamaludin (2015) The Effect of Substantive Parameters On The Efficiency Of Archimedes Screw Microhydro Power: A Review. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-9.. (Unpublished)

O

Obed M., Ali and Nik Rosli, Abdullah and R., Mamat and Abdul Adam, Abdullah (2015) Comparison of the Effect of Different Alcohol Additives with Blended Fuel on Cyclic Variation in Diesel Engine. Energy Procedia, 75. pp. 2357-2362. ISSN 1876-6102 . (Published)

Obed M., Ali and R., Mamat and Awad, Omar I. (2015) Characterization of High Blended Palm Biodiesel Fuel Properties with Chemical Additive. Journal of Pure and Applied Microbiology, 9 (Sp. 2). pp. 505-512. ISSN 0973-7510. (Published)

Obed M., Ali and R., Mamat and Nik R., Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Performance with Palm Biodiesel-diesel Blended Fuel. Renewable Energy, 86. pp. 59-67. ISSN 0960-1481. (Published)

Obed M., Ali and R., Mamat and Nik Rosli, Abdullah and Abdul Adam, Abdullah (2015) Analysis of Blended Fuel Properties and Engine Cyclic Variations with Ethanol Additive. Journal of Biobased Materials and Bioenergy, 9 (2). pp. 108-114. ISSN 1556-6560. (Published)

P

Ponnusamy, Barath and Wong, Fei Yong and Zulkifli, Ahmad@Manap (2015) A Low Cost Automated Table Tennis Launcher. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 291-296. ISSN 1819-6608. (Published)

Priyandoko, Gigih and Cholis, N. and Ariyono, S. (2015) Design of Single Acting Pulley Actuator (SAPA) Continuously Variable Transmission (CVT). Energy Procedia, 68. pp. 389-397. ISSN 1876-6102 . (Published)

R

R., Daud and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Development of Talus Implant based on Artificial Neural Network prediction of Talus Morphological Parameters. In: 1st International Conference on Materials and Manufacturing Engineering and Technology , 28-31 July 2015 , Korea. . (Unpublished)

R., Daud and N. Zara, Kolan and Mas Ayu, Hassan and Siti Haryani, Tomadi and Sudin, Izman (2015) Study of Flow and Temperature Effect on Carbon Steel in Oil and Gas Environment. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015) , 19-22 Sept 2015 , Johor Bahru. . (Unpublished)

R., Daud and Suaidah, S. and Mohammed Rafiq, Abdul Kadir and Sudin, Izman and Mas Ayu, Hassan and Hanumantharao, Balaji Raghavendran and Tunku, Kamarul (2015) Deveploment of Novel Talus Implant Based on Artificial Neural Network Prediction of Talus Morphological Parameters. In: World Bio Summit & Expo 2015 , 1-5 Nov 2015 , Dubai. . (Unpublished)

R., Mamat and Azmi, W. H. and G., Najafi and Ghobadian, B. and Yusaf, Talal (2015) Solar Energy in Iran: Current State and Outlook. Renewable and Sustainable Energy Reviews, 49. pp. 931-942. ISSN 1364-0321. (Published)

R., Mamat and Fayyazi, E. and Ghobadian, B. and G., Najafi and Hosseinzadeh, B. and Hosseinzadeh, J. (2015) An Ultrasound-Assisted System For The Optimization Of Biodiesel Production From Chicken Fat Oil Using A Genetic Algorithm And Response Surface Methodology. Ultrasonics Sonochemistry. ISSN 1350-4177. (In Press / Online First) (In Press / Online First)

R., Mamat and I. M., Yusri and M. K., Akasyah and O. M., Ali (2015) Combustion and Emissions Characteristics of a Compression Ignition Engine Fuelled with N-Butanol Blends. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 69-73. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Moosavian, Ashkan and Khazaee, Meghdad and G., Najafi and Kettner, Maurice (2015) Spark Plug Fault Recognition Based on Sensor Fusion and Classifier Combination using Dempster–Shafer Evidence Theory. Applied Acoustics, 93. pp. 120-129. ISSN 0003-682X. (Published)

R., Mamat and Nor Azwadi, Che Sidik and Alawi, Omer A. (2015) Performance Analysis of Nanorefrigerants in Heated and Rotating Concentric And Eccentric Annulus Cylinders. Jurnal Teknologi (Sciences and Engineering), 77 (8). pp. 91-97. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

R., Mamat and Wan Nor Maawa, Wan Ghazali and H. H., Masjuki and G., Najafi (2015) Effects of Biodiesel from Different Feedstocks on Engine Performance and Emissions: A Review. Renewable and Sustainable Energy Reviews, 51. pp. 585-602. ISSN 1364-0321. (Published)

R. A., Bakar and Ammar Alfaiz, M. A. and Musthafah, M. T. and M. Shahir, Ali and Abdul, Muhaimin (2015) New Design of a Low Cost Small Engine Dynamometer for Engine Testing. Applied Mechanics and Materials, 699. pp. 642-647. ISSN 1662-7482. (Published)

R. A., Bakar and Musthafah, Mohd Tahir and M. S., Ali and M. A., Salim and A. M., Fudhail and M. Z., Hassan and M. S., Abdul Muhaimin (2015) Performance Analysis of a Spark Ignition Engine using Compressed Natural Gas (CNG) as Fuel. Energy Procedia, 68. pp. 355-362. ISSN 1876-6102 . (Published)

R. A., Bakar and Tanti, Ali and Billy, Anak Sup and Mohd Farid, Zainudin and Gan, Leong Ming (2015) Study on Thermal-fluid Effect of Thermal Energy Storage Tank Design in Solar Energy Applications. Energy Procedia, 68. pp. 3-11. ISSN 1876-6102 . (Published)

Raja Hamzah, Raja Ismail (2015) Mechanical Design on Cutting Tool Life. Research Gate. (Published)

Reza, Alebrahim and Sallehuddin, Mohamed Haris and Nik Abdullah, Nik Mohamed and Shahrum, Abdullah (2015) Vibration Analysis of Self-Healing Hybrid Composite Beam Under Moving Mass. Composite Structures, 119. pp. 463-476. ISSN 0263-8223. (Published)

Roziah, Zailan and Amir, Abdul Razak and Firdaus, Muhamad (2015) Development of Solar Oven Incorporating Thermal Energy Storage Application. International Journal of Engineering Technology And Sciences (IJETS), 3 (1). pp. 1-4. ISSN 2289-697X. (Published)

Rozman, Mohd Tahar (2015) Characterization of titanium aluminide alloys synthesized by mechanical alloying technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ishak, Mahadzir).

S

S. A., Che Ghani and W. S., Wan Harun and M. F. F., Ab Rashid and Rasidi, Ibrahim (2015) Numerical Analysis of Internal Flow Embedded in a Cutting Tool. In: Proceedings of Engineering Technology International Conference (ETIC 2015) , 10-11 August 2015 , Bali, Indonesia. pp. 1-5..

S. H., Teo and Gan, Leong Ming (2015) Speeding Driving Behaviour: Age And Gender Experimental Analysis. In: The 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Zenith Hotel, Kuantan, Pahang, Malaysia. . (Unpublished)

S. J., Teoh and R. A., Bakar and Gan, Leong Ming and Mustika, Yasti (2015) Conceptual Design and Performance Analysis of Parallel Drive-Train for Hybrid Electric Motorcycle. Applied Mechanics and Materials, 699. pp. 1-8. ISSN 1662-7482. (Published)

S. W., Tan and Mohamad Fadli, Zolkipli and M., Rosyazwan and N., Hafizah and M., Shahrel (2015) Design And Development Of Wear Testing Analysis On Cylinder Head Valve. In: 2nd Integrated Design Project Conference (IDPC) 2015 , 11 December 2015 , Universiti Malaysia Pahang (UMP). pp. 1-14.. (Unpublished)

Salvinder, Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed and Mohd Salmi, Mohd Noorani (2015) Markov Chain Modelling of Reliability Analysis and Prediction under Mixed Mode Loading. Chinese Journal of Mechanical Engineering, 28 (2). pp. 307-314. ISSN 1000-9345. (Published)

Salvinder Singh, Karam Singh and Shahrum, Abdullah and Nik Abdullah, Nik Mohamed (2015) Reliability Analysis and Prediction of Time to Failure Distribution of an Automobile Crankshaft. Maintenance and Reliability, 17 (3). pp. 408-415. ISSN 1507-2711. (Published)

Salwani, Mohd Salleh and M.S., Husaini (2015) Strain-Rate Sensitivity of Boron Alloyed Steel. In: Automotive Vehicle Technologies Conference 2015 , 23-25 November 2015 , Taksim, Istanbul. p. 1.. (Unpublished)

Salwani, Mohd Salleh and Muhammad Aiman, S. (2015) Energy Absorption Capability of Stainless Steel Type 304 and Type 316. In: International Conference on Intelligent Computing, Mechanical and Production Processes 2015 , 23-24 Sept 2015 , Penang. . (Unpublished)

Siregar, J. P. and Cionita, Tezara and Bachtiar, Dandi and M. R. M., Rejab (2015) Tensile Properties of Pineapple Leaf Fibre Reinforced Unsaturated Polyester Composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482. (Published)

Siti Nur Atikah, Abdullah and Abdul Adam, Abdullah and Ahmad Rasdan, Ismail and B. M., Deros (2015) A Descriptive Analysis Of Factors Contributing To Bus Drivers’ Performances While Driving: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2430-2437. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Siti Rabiatull Aisha, Idris and Azmah Hanim, Mohamad Ariff and Ali, Ourdjini and Saliza Azlina, Osman (2015) Thermal Cyclic Test for Sn-4Ag-0.5Cu Solders on High P Ni/Au and Ni/Pd/Au Surface Finishes. Journal of Mechanical Engineering and Sciences (JMES) , 9. pp. 1572-1579. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2015) Development of Diffusion Barrier Layer on Copper-Printed Circuit Board Using Electroless Plating Method. International Journal of Computational Methods and Experimental Measurements, 3 (4). pp. 329-339. ISSN 2046-0546 (print); 2046-0554 (online). (Published)

Siti Rabiatull Aisha, Idris and Ourdjini, Ali and Azmah Hanim, Mohamad Ariff and Saliza Azlina, Osman (2015) Effect of Reflow Soldering Profile on Intermetallic Compound Formation. International Journal of Computer Applications in Technology, 52 (4). pp. 244-250. ISSN 0952-8091 (print); 1741-5047 (online). (Published)

Siti Rabiatull Aisha, Idris and Zetty Akhtar, Abd Malek and Hardinnawirda, Kahar (2015) A Review on Effect of Nickel Doping on Solder Joint Reliability. In: National Conference for Postgraduate Research (NCON-PGR 2015) , 24-25 January 2015 , Universiti Malaysia Pahang (UMP). pp. 1-16..

Sivarao, S. and M. J., Raguvaran and A. S., Dahlan and K., Kadirgama and M. A., Amran (2015) Air Permeability Investigation Towards Automotive Tyre Pressure Sustainability and Life Saving. ARPN Journal of Engineering and Applied Sciences, 10 (10). pp. 4404-4412. ISSN 1819-6608. (Published)

Sudrajad, Agung and Ahmad Fitri, Yusop (2015) Review of Electrostatic Precipitator Device for Reduce of Diesel Engine Particulate Matter. Energy Procedia, 68. pp. 370-380. ISSN 1876-6102. (Published)

Syeda Najiha, Masood (2015) Performance investigation and multi-objective optimization of end milling of aluminium alloy 6061 T6 with coated and uncoated carbide tools under various cooling conditions. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

T

T. M., Yusof and S., Anuar and Hassan, Ibrahim (2015) Thermal Analysis of a Ground Passive Cooling (GPC) Using Experimental Method. In: International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. . (Unpublished)

T. T., Ayu and M. H., Hailu and Hagos, F. Y. and Atnaw, Samson M. (2015) Energy Audit and Waste Heat Recovery System Design for a Cement Rotary Kiln in Ethiopia: A Case Study. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2983-3002. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2015) An Overview on Thermal and Fluid Flow Characteristics in a Plain Plate Finned and Un-Finned Tube Banks Heat Exchanger. Renewable and Sustainable Energy Reviews, 43. pp. 363-380. ISSN 1364-0321. (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Effect of Tube Spacing, Fin Density and Reynolds Number on Overall Heat Transfer Rate for In-line Configuration. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 3065-3075. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Tahseen, Tahseen Ahmad and M. M., Rahman and M., Ishak (2015) Experimental Study on Heat Transfer and Friction Factor in Laminar Forced Convection over Flat Tube in Channel Flow. Procedia Engineering, 105. pp. 46-55. ISSN 1877-7058. (Published)

Talib, S. F. A. and Azmi, W. H. and Irnie, Zakaria and W. A. N. W., Mohamed and A. M. I., Mamat and H., Ismail and W. R. W., Daud (2015) Thermophysical Properties of Silicon Dioxide (SiO2) in Ethylene Glycol/Water (EG/W) Mixture for Proton Exchange Membrane Fuel Cell Cooling Application. Energy Procedia, 79. pp. 366-371. ISSN 1876-6102 . (Published)

Tanti, Ali and Norfadzilah, Jusoh and R. A., Bakar and Teoh, S. J. and K., Kadirgama (2015) Thermal Effect of Thermal Energy Storage (TES) Tank for Solar Energy Application During Charging Cycle Based on the Grid Sensitivity Analysis. Energy Procedia, 79. pp. 245-251. ISSN 1876-6102 . (Published)

Tesfamariam, Dawit Abay and Bayray, Mulu and Tesfay, Meseret and Hagos, F. Y. (2015) Modeling and Experiment of Solar Crop Dryer for Rural Application. Journal of Chemical and Pharmaceutical Sciences, Sp (9). pp. 109-118. ISSN 0974-2115 . (Published)

Tesfay, A. H. and Hagos, F. Y. and Yohannes, K. G. and Nydal, O. J. (2015) Preparing Side Charging of PCM Storage: Theoretical and Experimental Investigation. IOP Conference Series: Materials Science and Engineering, 100 (012021). pp. 1-13. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Thamir K., Ibrahim and M. M., Rahman (2015) Optimum Performance Improvements of the Combined Cycle Based on an Intercooler–Reheated Gas Turbine. Journal of Energy Resources Technology, 137. pp. 1-11. ISSN 0195-0738 (print); 1528-8994 (online). (Published)

U

Ummu Kulthum, Jamaludin and Docherty, Paul D. and Chase, J. Geoffrey and Shaw, Geoffrey M. (2015) Impact of Haemodialysis on Insulin Kinetics of Acute Kidney Injury Patients in Critical Care. Journal of Medical and Biological Engineering, 35 (1). pp. 125-133. ISSN 1609-0985 (print); 2199-4757 (online). (Published)

Usri, N. A. and Azmi, W. H. and R., Mamat and Abdul Hamid, K. and Najafi, G. (2015) Heat Transfer Augmentation of Al2O3 Nanofluid in 60:40 Water to Ethylene Glycol Mixture. Energy Procedia, 79. pp. 403-408. ISSN 1876-6102 . (Published)

W

W. N., Mawaa and R., Mamat and G., Najafi and Obed M., Ali and A., Aziz (2015) Engine Performance and Emission of Compression Ignition Engine Fuelled With Emulsified Biodiesel-Water. In: IOP Conference Series: Materials Science and Engineering : International Conference On Mechanical Engineering Research (ICMER2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-7., 100 (012061). ISBN 1757-8981 (print); 1757-899X (online)

Wan Azlan, Wan Mohd Nowalid and A. R., Yusoff and Muhammad Adib, Shaharun (2015) Effect of lubrication conditions to the cutting force coefficients in machining process. Advanced Materials Research, 1115. pp. 55-58. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Wan Iryana, Wan Md Nor and Jasri, Mohamad (2015) Finite Element Simulation to Predict Wrinkling in Low Carbon Steel Deep Drawing Process Using Isotropic Model. In: 2nd International Conference on Mechanical Design and Manufacturing (ICMDM 2015) , 27-28 Disember 2015 , Phuket, Thailand. pp. 1-4.. (Unpublished)

Wong, Fei Yong and Zulkifli, Ahmad@Manap and Idris, Mat Sahat (2015) Development and Analysis of Arrow for Archery. In: International Conference On Industrial And Design Engineering (INCIDE2015) , 12-13 September 2015 , Putrajaya. pp. 1-7.. (Unpublished)

Y

Yasin Mustafa, Ahmed and Khairul Saleh, Mohamed Sahari and Basim A., Khidhir and M., Ishak (2015) Optimization of Multi-layer Welding of Titanium Alloy. Research Journal of Applied Sciences, Engineering and Technology, 10 (9). pp. 1029-1034. ISSN 2040-7459 (Print); 2040-7467 (Online). (Published)

Yogeswaran, Muthusamy (2015) Machinability of AISI304 stainless steel using Ethylene Glycol nano particles based coolant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Yogeswaran, Muthusamy and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor (2015) Effect of ZnO Nano Materials on Grinding Surface Finishing. International Journal of Automotive and Mechanical Engineering (IJAME), 12. pp. 2829-2843. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Z

Z. M., Hafizi and Epaarachchi, J. and Lau, K. T. (2015) Impact Location Determination on Thin Laminated Composite Plates Using an NIR-FBG Sensor System. Measurement, 61. pp. 51-57. ISSN 0263-2241. (Published)

Z. M., Hafizi and J. A., Epaarachchi (2015) Dynamic Response and Signal to Noise Ratio Investigation of NIR-FBG Dynamic Sensing System for Monitoring Thinwalled Composite Plate. In: 3rd International Conference on Mechanical Engineering Research (ICMER 2015) , 18-19 August 2015 , Kuantan, Pahang. pp. 1-10..

Z. M., Hafizi and M. S., Idris and N. M. M., Ammar (2015) Study on the Behavior of Particles in High Reynolds Number in Semi Ellipse Lid Driven Cavity. In: Proceedings of The International MultiConference of Engineers and Computer Scientists 2015, Vol II, (IMECS) , 18-20 March 2015 , Hong Kong. pp. 786-791..

Z. M., Hafizi and Mohd Fadhlan, Yusof and Siregar, J. P. and Lim, Kok Sing (2015) The Applications of FBG sensor for Realtime Strain Mapping of Thin Composite Plate under Point Loading. In: International Conference on Advanced Mechanics, Power and Energy 2015 (AMPE2015) , 5-6 December 2015 , Shah Alam, Selangor. .

Zahari, Taha and Anwar, P. P. A. Majeed and Mohd Yashim, Wong Paul Tze and Abdul Ghaffar, Abdul Rahman (2015) Preliminary Investigation on the Development of a Lower Extremity Exoskeleton for Gait Rehabilitation: A Clinical Consideration. Journal of Medical and Bioengineering, 4 (1). pp. 1-6. ISSN 2301-3796. (Published)

Zahari, Taha and H. A., Salaam and Tuan Mohammad Yusoff, Tuan Ya (2015) Triple Bottom Line Optimization for Sustainable Product Design. In: The 16th Asia Pacific Industrial Engineering and Management System Conference , 8-11 December 2015 , Caravelle Hotel, Ho Chi Minh City, Vietnam. . (Unpublished)

Zahari, Taha and Salaam, H. A. and Phoon, Sin Ye and T. M. Y. S., Tuan Ya and Mohd Razali, Mohamad (2015) Application of integrated sustainability assessment: Case study of a screw design. International Journal of Industrial Engineering, 22 (1). pp. 1-10. ISSN 1943-670X. (Published)

Zamri, Mohamed (2015) Tire Cavity Resonance Mitigation using Acoustic Absorbent Materials. Journal of Vibration and Control. ISSN 1077-5463 (print); 1741-2986 (online). (Published)

Zamri, Mohamed and Wang, Xu (2015) A Study of Tyre Cavity Resonance and Noise Reduction using Inner Trim. Mechanical Systems and Signal Processing, 50-51. pp. 498-509. ISSN 0888-3270. (Published)

Zulkifli, Ahmad@Manap and Mohd Aminuddin, Pi Remli and Mohd Haziq, Nordin and Nasrul Hadi, Johari and Z., Ghazalli and K., Kadirgama (2015) The Performance of Kicking by Different Boots Material. Journal of Human Sport and Exercise, 10 (Proc 2). pp. 657-665. ISSN 1988-5202. (Published)

This list was generated on Thu Mar 28 21:06:02 2024 +08.