Items where Division is "Faculty of Mechanical Engineering" and Year is 2018

Article

A., Shah and S., Izman and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud and Mohammed Rafiq, Abdul Kadir (2018) Physical Vapour Deposition on corrosion resistance: A review. ARPN Journal of Engineering and Applied Sciences, 13 (10). o3515-3523. ISSN 1819-6608. (Published)

A. A., Mohammed and Bachtiar, Dandi and M. R. M., Rejab and Jiang, X. X. and Abas, Falak O. and Abass, Raghad U. and Hasany, S. F. and Siregar, J. P. (2018) Effects of KMnO4 treatment on the Flexural, Impact, and Thermal properties of sugar palm fiber-reinforced thermoplastic polyurethane composites. JOM, 70 (7). pp. 1326-1330. ISSN 1047-4838. (Published)

A. A. M., Redhwan and W. H., Azmi and Nurul Nadia, Mohd Zawawi and M. Z., Sharif and R., Mamat (2018) Sonication Time Effect towards Stability of Al2O3/PAG and SiO2/PAG Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 14-27. ISSN 1823-5514. (Published)

Agung, E. H. and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Bachtiar, Dandi and Cionita, Tezara and Jamiluddin, Jaafar (2018) Water Absorption Behaviour and Mechanical Performance of Pineapple Leaf Fibre Reinforced Polylactic Acid Composites. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5760-5774. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ahmad Fitri, Yusop and R., Mamat and Yusaf, Talal and G., Najafi and Mohd Hafizil, Mat Yasin and Akasyah, M Khathri (2018) Analysis of Particulate Matter (PM) Emissions in Diesel Engines Using Palm Oil Biodiesel Blended with Diesel Fuel. Energies, 11 (5). pp. 1-25. ISSN 1996-1073. (Published)

Ahmad Syazwan, Ramli and F., Basrawi and Mohd Hazwan, Yusof and Oumer, A. N. and Nur Azfa, Johari and Azira, Muhamad and Mohd Razif, Mamat and Khairul, Habib and Ibrahim, Thamir Khalil (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7. ISSN 0737-3937 (Print) 1532-2300 (Online). (Published)

Ahmad Zaifazlin, Zainordin and Priyandoko, Gigih and Zamri, Mohamed (2018) Performance Simulation Analysis for Magnetorheological Damper with Internal Meandering Flow Valve. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5511-5521. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Aisyah, Jilani and Akhtar Razul, Razali (2018) Centrifugal pump performance characteristics for domestic application. MATEC Web of Conferences 225, 05011 (2018), 225 (05011). ISSN 2261-236X. (Submitted) (Submitted)

Al-Bawri, Samir Salem and Mohd Faizal, Jamlos and Soh, Ping Jack and Syed Alwee, Aljunid Syed Junid and Mohd Aminudin, Jamlos and Narbudowicz, Adam (2018) Multiband slot-loaded dipole antenna for wlan and lte-a applications. IET Microwaves, Antennas and Propagation, 12 (1). pp. 63-68. ISSN 1751-8725. (Published)

Aminullah, A. R. M. and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Nurul Nadia, Mohd Zawawi and K., Kadirgama and M. N. S., Ashraf (2018) Tribology Investigation of Automotive Air Condition (AAC) Compressor by using Al2O3/PAG Nanolubricant. Journal of Mechanical Engineering, SI 5 (1). pp. 49-61. ISSN 1823-5514. (Published)

Ang, F. Chen and M. Akmal, Adzmi and Abdul Adam, Abdullah and Mohd Fahmi, Othman and Mohd Kamal, Kamaruzzaman and Anes, G. Mrwan (2018) Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management, 171. pp. 461-477. ISSN 0196-8904. (Published)

Anggono, Willyanto and M. M., Noor and Suprianto, F. D. and Lesmana, L. A. and Gotama, G. J. and Setiyawan, A. (2018) Effect of Cerbera Manghas Biodiesel on Diesel Engine Performance. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5667-5682. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Anh, Tuan Hoang and Van, Vang Le and M.Said Al-Tawaha, Abdel Rahman and Duong, Nam Nguyen and M.Said Al-Tawaha, Abdel Razzaq and M. M., Noor and Van, Viet Pham (2018) An Absorption Capacity Investigation of New Absorbent Based On Polyurethane Foams and Rice Straw for Oil Spill Cleanup. Petroleum Science and Technology, 36 (5). pp. 361-370. ISSN 1091-6466(print); 1532-2459(online). (Published)

Arman Shah, Abdullah and Izman, Sudin and Siti Nurul Fasehah, Ismail and Mas Ayu, Hassan and R., Daud (2018) Study on adhesion strength of tin coated biomedical ti-13zr-13nb alloy. Jurnal Teknologi (Sciences and Engineering), 80. pp. 27-35. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Arman Shah, Abdullah and Mas Ayu, Hassan and Rosdi, Daud and Sudin, Izman and Siti Nurul Fasehah, Ismail and Che Ghani, Che Kob and Mohammed Rafiq, Abdul Kadir (2018) The influence of ultrasonic vibration frequency on the properties of TiN coated biomedical Ti-13Zr-13Nb. Metals, 8 (5). pp. 1-10. ISSN 2075-4701. (Published)

Asmara, Y. P. (2018) The roles of H2S gas in behavior of carbon steel corrosion in oil and gas environment: a review. Jurnal Teknik Mesin Mercu Buana (JTM), 7 (1). pp. 37-43. ISSN 2089-7235(Print); 2549-2888(Online). (Published)

Asmara, Y. P. and Kurniawan, Tedi (2018) Corrosion prediction for corrosion rate of carbon steel in oil and gas environment: a review. Indonesian Journal of Science and Technology, 3 (1). p. 64. ISSN 2528-1410. (Published)

Asmara, Y. P. and Kurniawan, Tedi and Sutjipto, A. G. E. and Jamiluddin, Jaafar (2018) Application of plants extracts as green corrosion inhibitors for steel in concrete - a review. Indonesian Journal of Science & Technology, 3 (2). pp. 76-88. ISSN 2527-8045. (Published)

Asnida, M. and Sakinah, Hisham and N. W., Awang and Amirruddin, Abdul Kadir and M. M., Noor and K., Kadirgama and D., Ramasamy and G., Najafi and F., Tarlochan (2018) Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact. Fuel, 212. pp. 656-667. ISSN 0016-2361. (Published)

Awad, Omar I. and Obed M., Ali and Hammid, Ali Thaeer and R., Mamat (2018) Impact of fusel oil moisture reduction on the fuel properties and combustion characteristics of SI engine fueled with gasoline-fusel oil blends. Renewable Energy, 123. pp. 79-91. ISSN 0960-1481. (Published)

Awad, Omar I. and R., Mamat and Ali, Obed Majeed and N. A. C., Sidik and Talal, Yusaf and K., Kadirgama and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable and Sustainable Energy Reviews, 82. pp. 2586-2605. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Hammid, Ali Thaeer and I. M., Yusri and Mohd Adnin, Hamidi and Humada, Ali Mahmood and Ahmad Fitri, Yusop (2018) Overview of the oxygenated fuels in spark ignition engine: Environmental and performance. Renewable and Sustainable Energy Reviews, 91. pp. 394-408. ISSN 1364-0321. (Published)

Awad, Omar I. and R., Mamat and Ibrahim, Thamir K. and Kettner, Maurice and K., Kadirgama and A. M., Leman and A. I.M., Shaiful (2018) Effects of fusel oil water content reduction on fuel properties, performance and emissions of SI engine fueled with gasoline -fusel oil blends. Renewable Energy, 118. pp. 858-869. ISSN 0960-1481. (Published)

Awad, Omar I. and R., Mamat and M. M., Noor and Ibrahim, Thamir K. and I. M., Yusri and Ahmad Fitri, Yusop (2018) The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review. Journal of the Energy Institute, 91 (1). pp. 19-32. ISSN 1743-9671. (Published)

B., Norhafzan and S. N., Aqida and F., Fazliana and Mohamed Reza Zalani, Mohamed Suffian and I., Ismail and C.M., Khairil (2018) Laser melting of groove defect repair on high thermal conductivity steel (HTCS-150). Applied Physics A, 124 (2). p. 169. ISSN 0947-8396 (Print); 1432-0630 (Online). (Published)

B., Sangmesh and K., Gopalakrishna and S. H., Manjunath and N., Kathyayini and K., Kadirgama and Mahendran, Samykano and Vijayakumar, G. C. (2018) Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3852-3865. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Baheta, Aklilu Tesfamichael and Oumer, A. N. and Hailegiorgis, Sintayehu M. (2018) Analysing the Thermal Performance of Heat Pipe Using Copper Nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 2289-7879. (Published)

Bonello, P. and M. F., Hassan (2018) An experimental and theoretical analysis of a foil-air bearing rotor system. Journal of Sound and Vibration, 413. pp. 395-420. ISSN 0022-460X. (Published)

C. W., Mohd Noor and M. M., Noor and R., Mamat (2018) Biodiesel as alternative fuel for marine diesel engine applications: A review. Renewable & Sustainable Energy Reviews, 94. pp. 127-142. ISSN 1364-0321. (Published)

C. W., Mohd Noor and R., Mamat and Ahmed, Ali Najah (2018) Comparative study of artificial neural network and mathematical model on marine diesel engine performance prediction. International Journal of Innovative Computing, Information and Control, 14 (3). pp. 959-969. ISSN 1349-4198. (Published)

C. W., Mohd Noor and R., Mamat and M. M., Noor and Samo, K. B. and W. B., Wan Nik (2018) Effects of low proportion palm fatty acids methyl ester blends on the performance and combustion of marine diesel engine. Journal of Biobased Materials and Bioenergy, 12 (2). pp. 153-160. ISSN 1556-6560. (Published)

Chala, G. T. and Abd Rashid, Abd Aziz and Hagos, F. Y. (2018) Natural Gas Engine Technologies: Challenges and Energy Sustainability Issue. Energies, 11 (11). pp. 1-44. ISSN 1996-1073. (Published)

Dondariya, Chandrakant and Porwal, Deepak and Awasthi, Anshul and Shukla, Akash Kumar and Sudhakar, K. and S. R., Murali Manohar and Bhimte, Amit (2018) Performance simulation of grid-connected rooftop solar PV system for small households: A case study of Ujjain, India. Energy Reports, 4. pp. 546-553. ISSN 2352-4847. (Published)

Fernini, B. and Temmar, M. and M. M., Noor (2018) Toward a dynamic analysis of bipedal robots inspired by human leg muscles. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3593-3604. ISSN 2231-8380 (online). (Published)

Fernini, Brahim and Temmar, Mustapha and Kai, Yoshihiro and M. M., Noor (2018) Verification of the Dynamic Modeling of 2-R Robot Actuated by (N) Equally Spaced Planet-Gears by Using SolidWorks and MATLAB/SIMULINK. Mechanics and Mechanical Engineering, 22 (4). pp. 1497-1510. ISSN 1428-1511. (Published)

Ganapathy, Veanuga and Kurniawan, Tedi and Mas Ayu, Hassan and Asmara, Y. P. and R., Daud and Prastomo, Niki and Dani Nandiyanto, Asep Bayu (2018) Aluminum alloy AA2024 coated with ZrO2 using a sol-gel-assisted dip-coating technique and its corrosion performance. Journal of Engineering Science and Technology, 13 (6). pp. 1713-1721. ISSN 1823-4690. (Published)

Hammid, Ali Thaeer and M. H., Sulaiman and Awad, Omar I. (2018) A robust firefly algorithm with backpropagation neural networks for solving hydrogeneration prediction. Electrical Engineering, 100 (4). pp. 2617-2633. ISSN 0948-7921 (Print); 1432-0487 (Online). (Published)

Hasan, Mohammed M. and M., Ishak and M. R. M., Rejab (2018) Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys. The International Journal of Advanced Manufacturing Technology, 98 (9-12). pp. 2747-2758. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes Abdulla G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamaruzzaman and Hagos, F. Y. (2018) Analysis of combustion characteristics, engine performances and emissions of long-chain alcohol-diesel fuel blends. Fuel, 220. pp. 682-691. ISSN 0016-2361. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2018) Investigation of the pressure ratio and efficiency of a turbocharger centrifugal compressor with a vaned diffuser. World Review of Science, Technology and Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242. (Published)

Hoang, A. T. and M. M., Noor and Pham, X. D. (2018) Comparative analysis on performance and emission characteristic of diesel engine fueled with heated coconut oil and diesel fuel. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (1). pp. 5110-5125. ISSN 2180-1606. (Published)

Hoseini, S. S. and G., Najafi and Ghobadian, Barat and Yusaf, Talal and R., Mamat (2018) Experimental and numerical analysis of flow and heat transfer characteristics of EGR cooler in diesel engine. Applied Thermal Engineering, 140. pp. 745-758. ISSN 1359-4311. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Ailanthus altissima (tree of heaven) seed oil: Characterisation and optimisation of ultrasonication-assisted biodiesel production. Fuel, 220. pp. 621-630. ISSN 0016-2361. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2018) Novel environmentally friendly fuel: the effects of nanographene oxide additives on the performance and emission characteristics of diesel engines fuelled with Ailanthus altissima biodiesel. Renewable Energy, 125. pp. 283-294. ISSN 0960-1481. (Published)

Hussein, Adnan M. and Lingenthiran, Samylingam and K., Kadirgama and M. M., Noor and Aik, L. K. (2018) Palm oil based nanofluids for enhancing heat transfer and rheological properties. Heat and Mass Transfer, 54 (10). pp. 3163-3169. ISSN 0947-7411 (Print); 1432-1181 (Online). (Published)

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. and R., Mamat (2018) Performance and land footprint analysis of a solar photovoltaic tree. Journal of Cleaner Production, 187. pp. 432-448. ISSN 1879-1786. (Published)

Hyder, Farhan and K., Sudhakar and R., Mamat (2018) Solar PV Tree Design: A Review. Renewable and Sustainable Energy Reviews, 82 (Part 1). pp. 1079-1096. ISSN 1364-0321. (Published)

I. M., Yusri and Anwar, P. P. Abdul Majeed and R., Mamat and M. F., Ghazali and Awad, Omar I. and Azmi, W. H. (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renewable and Sustainable Energy Reviews, 90. pp. 665-686. ISSN 1364-0321. (Published)

Ibrahim, Thamir K. and Marwah Noori, Mohammed and Mohammed, Kamil Mohammed and G., Najafi and Nor Azwadi, Che Sidik and F., Basrawi and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118. pp. 832-846. ISSN 0017-9310. (Published)

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Awad, Omar I. and Abdalla, Ahmed N. and F., Basrawi and Marwah Noori, Mohammed and G., Najafi and R., Mamat (2018) A comprehensive review on the exergy analysis of combined cycle power plants. Renewable and Sustainable Energy Reviews, 90. pp. 835-850. ISSN 1364-0321. (Published)

Irnie, Zakaria and W. A. N., W. Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Irnie, Zakaria and W. A. N. W., Mohamed and Azmi, W. H. and A. M. I., Mamat and R., Mamat and W. R. W., Daud (2018) Thermo-electrical performance of PEM fuel cell using Al2O3nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2018) Numerical analysis of SiO2 nanofluid performance in serpentine PEMFC cooling plate. International Journal of Engineering & Technology, 7 (4). pp. 170-174. ISSN 2227-524X. (Published)

Ismail Ali, Abdul Aziz and Daing Mohamad Nafiz, Daing Idris and Mohd Hasnun Ariff, Hassan and Mohamad Firdaus, Basrawi (2018) Finite element analysis of impact energy on spur gear. MATEC Web of Conferences, 225 (06011). pp. 1-9. ISSN 2261-236X. (Published)

Jamiluddin, Jaafar and Siregar, J. P. and A. N., Oumer and Mohammad Hazim, M. Hamdan and Tezara, C. and Mohd Sapuan, Salit (2018) Experimental Investigation on Performance of Short Pineapple Leaf Fiber Reinforced Tapioca Biopolymer Composites. BioResources, 13 (3). pp. 6341-6355. ISSN 1930-2126. (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Mohd Bijarimi, Mat Piah and Cionita, Tezara and Sharmiza, Adnan and Teuku, Rihayat (2018) Influence of selected treatment on tensile properties of short pineapple leaf fiber reinforced tapioca resin biopolymer composites. Journal of Polymers and the Environment, 26 (11). pp. 4271-4281. ISSN 1566-2543 (Print); 1572-8919 (Online). (Published)

Jamiluddin, Jaafar and Siregar, J. P. and Tezara, C. and M. H.M., Hamdan and S. M., Sapuan (2018) Characterisation of cassava biopolymers and the determination of their optimum processing temperatures. Plastics, Rubber and Composites, 47 (10). pp. 447-457. ISSN 1465-8011. (Published)

Juliawati, Alias and Nurul Shuhada, Mohamed and M., Ishak and Zhou, Xiorong and Thompson, George E. (2018) The influence of hot forming on the microstructure and corrosion behaviour of AZ31B magnesium alloys. Indonesian Journal of Science & Technology, 3 (2). pp. 150-157. ISSN 2527-8045. (Published)

K., Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat (2018) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer, 118. pp. 617-627. ISSN 0017-9310. (Published)

K., Kadirgama and Keeran, Anamalai and Ramachandran, Kaaliarasan and D., Ramasamy and Samykano, Mahendran and Kottasamy, A. and Lingenthiran, Samylingam and M. M., Rahman (2018) Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2061-2076. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

K., Kadirgama and W. S., Wan Harun and Tarlochan, F. and Mahendran, Samykano and D., Ramasamy and Mohd Zaidi, Azir and Mehboob, H. (2018) Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 495-510. ISSN 0268-3768. (Published)

Kamal, Minhas and M. M., Rahman (2018) Advances in fatigue life modeling: A review. Renewable and Sustainable Energy Reviews, 82 (1). pp. 940-949. ISSN 1364-0321. (Published)

Khairul Ihsan, Yaakob and M., Ishak and M. H., Aiman and Siti Rabiatull Aisha, Idris (2018) Characterization of Heat-Treated Gas Metal Arc-Welded Boron Steel Sheets. The International Journal of Advanced Manufacturing Technology, 94 (1-4). pp. 827-834. ISSN 0268-3768 (Print); 1433-3015 (Online). (Published)

Khamisah, Abdul Hamid and Azmi, W. H. and M. F., Nabil and R., Mamat and Sharma, K. V. (2018) Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids. International Journal of Heat and Mass Transfer, 116. pp. 1143-1152. ISSN 0017-9310. (Published)

Krishnan Sasidharan, Suseel Jai and KrishnaMurthy, Nagarajan Parasumanna and R., Mamat and Sathyamurthy, R. (2018) Synthesis, characterisation and thermo-physical investigations on magnesia nanoparticles dispersed in ethylene glycol–DI water (50:50). IET Micro & Nano Letters, 13 (3). pp. 335-340. ISSN 1750-0443. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Performance of thin-film BIPV as double sloped pitched roof in buildings of Malaysia. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 40 (20). pp. 2476-2484. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano and Sukumaran, Sreenath (2018) Dust cleaning robots (DCR) for BIPV and BAPV solar power plants-A conceptual framework and research challenges. Procedia Computer Science, 133. pp. 746-754. ISSN 1877-0509. (Published)

Kumari, Khushboo and Suresh, Sundarajoo and Arisutha, S. and Sudhakar, K. (2018) Anaerobic co-digestion of different wastes in a UASB reactor. Waste Management and Research, 77. pp. 545-554. ISSN 0734242X. (Published)

L. H., Shah and A., Gerlich and Y., Zhou. (2018) Design Guideline for Intermetallic Compound Mitigation in Al-Mg Dissimilar Welding through Addition of Interlayer. The International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 2667-2678. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Lingenthiran, Samylingam and Keeran, Anamalai and K., Kadirgama and Samykano, Mahendran and D., Ramasamy and M. M., Noor and G., Najafi and M. M., Rahman and Hong, Wei Xian and Nor Azwadi, Che Sidik (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127. 173 - 181. ISSN 0017-9310. (Published)

Liu, Xiaojun and Daigo, Uchino and Ikeda, Keigo and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki (2018) Driving assist system for ultra-compact EVs-fundamental consideration of muscle burden owing to differences in the drivers' physiques. Actuators, 7 (3). pp. 1-10. ISSN 2076-0825. (Published)

Liu, Xiaojun and Uchino, Daigo and Ikeda, Keigo and Endo, Ayato and Mohamad Heerwan, Peeie and Narita, Takayoshi and Kato, Hideaki (2018) Driving assist system for ultra-compact EVs—fundamental consideration of muscle burden owing to differences in the drivers’ physiques. Actuators, 7 (3). pp. 1-10. ISSN 2076-0825. (Published)

Loh, Quo Liang and Kok, Yin Hui and Nur Hazreen, Mohd Hasni and Mohd Azrul Hisham, Mohd Adib (2018) Development of heart simulator (Heart-S) on the left ventricle for measuring the blood circulation during cardiac cycle. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 36. pp. 78-83. ISSN 2296-9837. (Published)

Luqman Hakim, Ahmad Shah and N. H, Othman and Gerlich, A. P. (2018) Review of research progress on aluminium–magnesium dissimilar friction stir welding. Science and Technology of Welding and Joining, 23 (3). pp. 256-270. ISSN 1362-1718. (Published)

M Arif, Abdullah and Mohd Fadzil Faisae, Ab Rashid and Zakri, Ghazalli and Nik Zuki, Nik Mohamed and Ahmad Nasser, Mohd Rose (2018) Modelling of assembly sequence planning problem using base part concept. AIP Publishing. pp. 200131-200135. ISSN 978-0-7354-1752-6. (Published)

M., Azwan and M. A., Maleque and M. M., Rahman (2018) TIG torch surfacing of metallic materials - a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 1745-9192. (Published)

M., Ishak and K. I., Yaakob and M. M., Quazi and M. N. M., Salleh (2018) Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology. Measurement, 135. pp. 452-466. ISSN 0263-2241. (Published)

M. F., Nabil and Azmi, W. H. and Abdul Hamid, K. and R., Mamat (2018) Experimental investigation of heat transfer and friction factor of TiO2-SiO2 nanofluids in water:ethylene glycol mixture. International Journal of Heat and Mass Transfer, 124. pp. 1361-1369. ISSN 0017-9310. (Published)

M. F. F., Ab Rashid and N. M. Zuki, N. M. and F. R. M., Romlay and M., Jusop (2018) Optimization of travelling salesman problem with precedence constraint using modified GA encoding. Advanced Science Letters, 24 (2). pp. 1484-1487. ISSN 1936-6612. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Nasir, Meseret and Mahfodzah, M. Padzi (2018) Smart Door Lock System Using Bluetooth Based Android for Smartphone with Door Lock Keypad. Journal of Advanced Research in Dynamical & Control Systems, 10 (13S). pp. 1246-1254. ISSN 1943-023X. (Published)

M. M., Hasan and M. M., Rahman and K., Kadirgama and D., Ramasamy (2018) Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine. Applied Thermal Engineering, 128. pp. 1464-1475. ISSN 1359-4311. (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi and Aiman, Mohd Halil (2018) Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology. The International Journal of Advanced Manufacturing Technology, 9 (1-4). pp. 985-1001. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

M. R. M., Nawi and M. Z. A., Rehim and Azmi, W. H. and S. A., Razak (2018) The characterization and thermo-physical property investigations of SiO2/HFE7000 nanorefrigerants. International Journal of Refrigeration, 88. pp. 275-283. ISSN 0140-7007. (Published)

M. Z., Sharif and Azmi, W. H. and R., Mamat and A. I. M., Shaiful (2018) Mechanism for improvement in refrigeration system performance by using nanorefrigerants and nanolubricants - A review. International Communications in Heat and Mass Transfer, 92. pp. 56-63. ISSN 0735-1933. (Published)

ManojKumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano and Jayaseelan, V. (2018) On the technologies empowering drones for intelligent monitoring of solar photovoltaic power plants. Procedia Computer Science, 133. pp. 585-593. ISSN 1877-0509. (Published)

Mas Ayu, Hassan and R., Daud and A., Shah and H. M., Hazwan and Siti Haryani, Tomadi and Salwani, Mohd Salleh (2018) Effect of Thermal Oxidation and Carbon Concentrations on Co-Cr-Mo Alloy in Enhanced Corrosion Protection. Materials Science Forum, 916. pp. 170-176. ISSN 0255-5476. (Published)

Mas Ayu, Hassan and R., Daud and Sudin, Izman and Arman Shah, Abdullah and Mahmood, Anwar and Krishnamurithy, G. and Tunku, Kamarul (2018) In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer. Jurnal Teknologi (Sciences and Engineering), 80 (1). pp. 35-42. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Mohamad Zairi, Baharom and Delbressine, Frank and Toeters, Marina and Feijs, Loe (2018) The development and the wearability assessment of cliff: an automatized zipper. International Journal of Mechanical Engineering and Robotics Research, 7 (5). pp. 448-457. ISSN 2278-0149. (Published)

Mohammad Ali, Asaad and Mohammad, Ismail and Mahmood, Md. Tahir and Huseien, Ghasan Fahim and Raja, Pandian Bothi and Asmara, Y. P. (2018) Enhanced corrosion resistance of reinforced concrete: Role of emerging eco-friendly Elaeis guineensis/silver nanoparticles inhibitor. Construction and Building Materials, 188. pp. 555-568. ISSN 0950-0618. (Published)

Mohammed, A. A. and Bachtiar, Dandi and M. R. M., Rejab and Siregar, J. P. (2018) Effect of microwave treatment on tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites. Defence Technology, 14 (4). pp. 287-290. ISSN 22149147. (Published)

Mohd Akramin, Mohd Romlay and A. K., Ariffin and Masanori, Kikuchi and M., Beer and M. S., Shaari and M. N. M., Husnain (2018) Surface crack growth prediction under fatigue load using probabilistic S‑version finite element model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (522). pp. 1-14. ISSN 1806-3691. (Published)

Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Mohmad Sairaji, Muhamad Imran and A. R., Razali and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak and Ospina, Alejandro and Lanfranchi, Vincent (2018) Preliminary thermal evaluation of actuator for steer-by-wire vehicle. IEEE Transactions on Vehicular Technology, 67 (12). pp. 11468-11474. ISSN 0018-9545. (Published)

Mohd Sahril, Mohd Fouzi and Khaironi, Mohd Jelani and N. A., Nazri and M. S. M., Sani (2018) Finite element modelling and updating of welded thin-walled beam. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (4). pp. 5874-5889. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) Thermal analysis of earth-to-air heat exchanger using laboratory simulator. Applied Thermal Engineering, 134. pp. 130-140. ISSN 1359-4311. (Published)

Mohd Yusof, Taib and Hassan, Ibrahim and Azmi, W. H. and M. R. M., Rejab (2018) The thermal characteristics and performance of a ground heat exchanger for tropical climates. Renewable Energy, 121. pp. 528-538. ISSN 0960-1481 . (Published)

Muhammad Nabil Fikri, Mohamad and Azmi, W. H. and Khamisah, Abdu Hamid and R., Mamat (2018) Heat transfer performance of Tio2– SiO2 nanofluid in water-ethylene glycol mixture. Journal of Mechanical Engineering, SI 5 (1). pp. 39-48. ISSN 1823-5514. (Published)

N. A., Halim and Siregar, J. P. and Mathivanan, D. and Bachtiar, Dandi and Z., Ghazalli and M. R. M., Rejab and Tezara, C. (2018) The performance of mengkuang leaf fiber reinforced low density polyethylene composites. Journal of Mechanical Engineering and Sciences (JMES), 12 (2). pp. 3645-3655. ISSN 2231-8380 (online). (Published)

N. M. M., Zawawi and Azmi, W. H. and A. A. M., Redhwan and M. Z., Sharif and Mahendran, Samykano (2018) Experimental investigation on thermo-physical properties of metal oxide composite nanolubricants. International Journal of Refrigeration, 89. pp. 11-21. ISSN 0140-7007. (Published)

Nasrual Azuan, Alang and Nikbin, Kamran M. (2018) An analytical and numerical approach to multiscale ductility constraint based model to predict uniaxial/multiaxial creep rupture and cracking rates. International Journal of Mechanical Sciences, 135. pp. 342-352. ISSN 0020-7403. (Published)

Nasrul Azuan, Alang (2018) Characterization of creep deformation and rupture behaviour of P92 steel weldment at 600°C. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3976-3987. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and K., Kadirgama and F. E. C., Othman (2018) P84 Co-Polyimide Based-Tubular Carbon Membrane: Effect of Heating Rates on Helium Separations. Solid State Phenomena, 280. pp. 308-311. ISSN 1662-9779. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nur Izwanne, Mahyon (2018) PI/NCC-Based Tubular Carbon Membrane: Influence of Aging Times Towards Oxygen Separation Performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (2). pp. 187-196. ISSN 2289-7879. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and K., Kadirgama and Mohamad Shahrizan, Moslan and Faten Ermala, Che Othman and Nor Hafiza, Ismail and Samykano, Mahendran and Zawati, Harun (2018) Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 378-381. ISSN 2289-5981 (Print); 2289-599x (Online). (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and K., Kadirgama (2018) P84 Co-polyimide/Nanocrystalline Cellulose (NCC)-based tubular carbon membrane: effect of drying times for carbon dioxide separation at elevated carbonization temperature. Journal of Applied Membrane Science & Technology, 22 (1). pp. 49-54. ISSN 2600-9226. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Nur Izwanne, Mahyon and Z., Harun and K., Kadirgama (2018) Precursor Selection for Carbon Membrane Fabrication: A Review. Journal of Applied Membrane Science & Technology, 22 (2). pp. 131-144. ISSN 2600-9226. (Published)

Norhaida, Ab. Razak and Davies, Catrin Mair and Nikbin, Kamran M. (2018) Testing and assessment of cracking in P91 steels under creep-fatigue loading conditions. Engineering Failure Analysis, 84. pp. 320-330. ISSN 1350-6307. (Published)

Nurul Aiyshah, Mazlan and Wira Jazair, Yahya and Ahmad Muhsin, Ithnin and A. K., Hasannuddin and Nur Atiqah, Ramlan and Sugeng, Dhani Avianto and A. R., Muhammad Adib and Koga, Tsuyoshi and R., Mamat and Nor Azwadi, Che Sidik (2018) Effects of different water percentages in non-surfactant emulsion fuel on performance and exhaust emissions of a light-duty truck. Journal of Cleaner Production, 179. pp. 559-566. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Nurul Izzah, Ab Rahim and Salwani, Mohd Salleh and Mohd Shahril, M. (2018) Crushing Behaviour of Filled Tubes Under Static and Dynamic Loading Conditions: A Review. International Journal of Engineering & Technology, 7 (4.22). pp. 6-11. ISSN 2227-524X. (Published)

Nurul Nadia, Mohd Zawawi and W. H., Azmi and A. A. M., Redhwan and M. Z., Sharif (2018) Thermo-Physical Properties of Metal Oxides Composite Nanolubricants. Journal of Mechanical Engineering, SI 5 (1). pp. 28-38. ISSN 1823-5514. (Published)

Oumer, A. N. and M. M., Hasan and Baheta, Aklilu Tesfamichael and R., Mamat and Abdul Adam, Abdullah (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98. ISSN 1364-0321. (Published)

Pakdel, Amir and Witecka, Agnieszka and Rydzek, Gaulthier and Dayangku Noorfazidah, Awang Sh'ri and Nicolosi, Valeria (2018) A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al-B4C composites produced by semisolid stir casting. Materials Science and Engineering: A, 721. pp. 28-37. ISSN 0921-5093. (Published)

Pakdel, Amir and Witecka, Agnieszka and Rydzek, Gaulthier and Dayangku Noorfazidah, Awang Shri and Nicolosi, Valeria (2018) A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al–B4 C composites produced by semisolid stir casting. Materials Science and Engineering: A, 721. pp. 28-37. ISSN 0921-5093. (Published)

Patil, Nagraj and K., Gopalakrishna and B., Sangmesh and Sudhakar, K. and Vijayakumar, G. C. (2018) Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3927-3941. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Quanjin, Ma and M. R. M., Rejab and Idris, Mat Sahat and M., Amiruddin and Bachtiar, Dandi and Siregar, J. P. and M. I., Ibrahim (2018) Design of portable 3-axis filament winding machine with inexpensive control system. Journal of Mechanical Engineering and Sciences (JMES), 12 (1). pp. 3479-3493. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and Fazal, M. A. and Sazzad, B. S. and Bashir, M. Nasir and Jamshaid, M. (2018) Mechanical and tribological performance of a hybrid MMC coating deposited on Al–17Si piston alloy by laser composite surfacing technique. RSC Advances, 8 (13). pp. 6858-6869. ISSN 2046-2069. (Published)

Quazi, M. M. and M., Ishak and Arslan, A. and M. Nasir, Bashir and Imran, Ali (2018) Scratch Adhesion and Wear Failure Characteristics of PVD multilayer CrTi/CrTiN Thin Film Ceramic Coating Deposited on AA7075-T6 Aerospace Alloy. Journal of Adhesion Science and Technology, 32 (6). pp. 625-641. ISSN 0169-4243. (Published)

Ramachandran, K. and K., Kadirgama and Awad, Omar I. and D., Ramasamy and Mahendran, Samykano and Azmi, W. H. (2018) Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98. pp. 13-21. ISSN 0735-1933. (Published)

Rydzek, Gaulthier and Pakdel, Amir and Witecka, Agnieszka and Awang Shri, Dayangku Noorfazidah and Gaudière, Fabien and Nicolosi, Valeria and Mokarian-Tabari, Parvaneh and Schaaf, Pierre and Boulmedais, Fouzia and Ariga, Katsuhiko (2018) PH-Responsive saloplastics based on weak polyelectrolytes: From molecular processes to material scale properties. Macromolecules, 51 (12). pp. 4424-4434. ISSN 0024-9297. (Published)

Shukla, Akash Kumar and Sudhakar, K. and Baredar, Prashant and R., Mamat (2018) BIPV based sustainable building in South Asian countries. Solar Energy, 170. pp. 1162-1170. ISSN 0038-092X. (Published)

Shukla, Akash Kumar and Sudhakar, K. and Baredar, Prashant and R., Mamat (2018) Solar PV and BIPV system: Barrier, challenges and policy recommendation in India. Renewable and Sustainable Energy Reviews, 82 (Part 3). pp. 3314-3322. ISSN 1364-0321. (Published)

Siti Aisyah, Jilani and Akhtar Razul, Razali (2018) Variable speed pump performance characteristics for domestic application. MATEC Web of Conferences 225, 02005 (2018), 225 (2005). ISSN eISSN: 2261-236X. (Published)

Sofiah, A. G. N. and Mahendran, Samykano and K., Kadirgama and Mohan, R. V. and Nurul Akmal, Che Lah (2018) Metallic nanowires: Mechanical properties - Theory and experiment. Applied Materials Today, 11. pp. 320-337. ISSN 23529407. (Published)

Sudhakar, K. and R., Mamat and Mahendran, Samykano and Azmi, W. H. and W. F. W., Ishak and Yusaf, Talal (2018) An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91. pp. 165-179. ISSN 1364-0321. (Published)

Sukumaran, Sreenath and Sudhakar, K. (2018) Performance analysis of solar powered airport based on energy and exergy analysis. Energy Procedia, 149. pp. 1000-1009. ISSN 1876-6102. (Published)

Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Azrina, Md Ralib and Mohd Basri, Mat Nor and Pretty, Christopher G. and Luqman, Humaidi (2018) Performance of stochastic targeted blood glucose control protocol by virtual trials in the Malaysian intensive care unit. Computer Methods and Programs in Biomedicine, 162. pp. 149-155. ISSN 0169-2607. (Published)

Vorathin, E. and Mohd Hafizi, Zohari and S. A., Che Ghani and Siregar, J. P. and K. S., Lim (2018) FBGs Real-Time Impact Damage Monitoring System of GFRP Beam Based on CC-LSL Algorithm. International Journal of Structural Stability and Dynamics, 18 (5). p. 1850075. ISSN 0219-4554. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2018) A highly sensitive multiplexed FBG pressure transducer based on natural rubber diaphragm and ultrathin aluminium sheet. Optics & Laser Technology, 106. pp. 177-181. ISSN 0030-3992. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2018) A natural rubber diaphragm based transducer for simultaneous pressure and temperature measurement by using a single FBG. Optical Fiber Technology, 45. pp. 8-13. ISSN 1068-5200. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and N., Muhamad and S. A., Che Ghani and F., Ahmad and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Kamariah, M. S. I. N. and Norhamidi, Muhamad and S. A., Che Ghani and Ahmad, Faiz and Zamri, Mohamed (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 0032-5910. (Published)

W. S., Wan Harun and Nursyawani, Manam and Nurul Kamariah, Md Saiful Islam and Safian, Sharif and Ahmad Hafiz, Zulkifly and Ishtiaq, Ahmad and Miura, Hideshi (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technology, 331. pp. 74-97. ISSN 0032-5910. (Published)

W. S., Wan Harun and R. I. M., Asri and F. R. M., Romlay and S., Sharif and N. H. M., Jan and F., Tsumori (2018) Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel. Journal of Alloys and Compounds, 748. pp. 1044-1052. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

W. S., Wan Harun and R. I. M., Asri and Juliawati, Alias and Farah Hanani, Zulkifli and K., Kadirgama and S. A., Che Ghani and Jun Haslinda, Haji Shariffuddin (2018) A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials. Ceramics International, 44 (2). pp. 1250-1268. ISSN 0272-8842. (Published)

Wahaizad, Safiei and M. M., Rahman and Siti Aishah, Rusdan (2018) Experimental investigation of MQL Optimum Parameters In End Milling of AA6061-T6 using Taguchi Method. International Journal of Engineering & Technology, 7 (4.35). pp. 186-189. ISSN 2227-524X. (Published)

Wan Fadzlina, Muhd Shukeri and Mohd Basri, Mat Nor and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Normy Norfiza, A. Razak and Azrina, Md Ralib (2018) Levels and diagnostic value of model-based insulin sensitivity in sepsis: a preliminary study. Indian Journal of Critical Care Medicine, 22 (6). pp. 402-407. ISSN 0972-5229. (Published)

Wan Mohd Nafis, Wan Lezaini and Addie Irawan, Hashim and A. R., Razali (2018) Impedance control approach on leg motion speed variation on soft surface interaction. International Journal of Engineering & Technology, 7 (4.27). pp. 1-6. ISSN 2227-524X. (Published)

Zuhaira, Abdullah and Hazrulzurina, Suhaimi and Abdul Adam, Abdullah and Mohd Firdaus, Taufik and Mrwan, Anes G. (2018) Effect of pentanol-diesel fuel blends on thermo-physical properties, combustion characteristics, engine performance and emissions of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 15 (3). pp. 5435-5450. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zulhishamuddin, A. R. and S. N., Aqida and Mohd Rashidi, Maarof (2018) A comparative study on wear behaviour of Cr/Mo surface modified grey cast iron. Optics & Laser Technology, 104. pp. 164-169. ISSN 0030-3992. (Published)

Zulkifli, Ahmad and Mohd Najeb, Jamaludin and Abdul Hafidz, Omar (2018) Development of Wearable Electromyogram for the Physical Fatigue Detection During Aerobic Activity. Movement, Health & Exercise (MoHE), 7 (1). pp. 15-25. ISSN 2231-9409. (Published)

Book Chapter

F., Basrawi and Ibrahim, Thamir K. and Sathiyaseelan, Surendran S. and A. A., Razak (2018) Experimental investigation on performance of solar-powered attic ventilation. In: Sustainable Thermal Power Resources Through Future Engineering. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-19. ISBN 978-981-13-2968-5

Khairul Ihsan, Yaakob and M., Ishak and Siti Rabiatull Aisha, Idris (2018) The effect of argon shielding gas flow rate on welded 22MNBS boron steel using low power fiber laser. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Cham, pp. 39-48. ISBN 978-981-10-9040-0

Khairul Shah, Affendy Yakof and Nor Fazlin, Zabudin and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Development of 3D printed heart model for medical training. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 109-116. ISBN 9789811087875

M. S. A., Noman Ranak and Saiful Azad, B. M. F and Karnal, Ruhee and N. Nourin, Nisa and Nazrul, Kabir and M. M., Rahman and Kamal Z., Zamli (2018) IPTV network security: threats and countermeasures. In: IPTV delivery networks: next generation architectures for live and video on demand services. John Wiley & Sons, New Jersey, pp. 203-222. ISBN 9781119397939

Mas Ayu, Hassan and Sakinah, Muhamad Hisham and K., Kadirgama and D., Ramasamy and M. M., Noor and M. M., Rahman (2018) Optimization on wear performance of anti wear additive added biolubricant. In: Improved performance of materials: design and experimental approaches. Springer, Switzerland, pp. 1-10. ISBN 9783319595900 (online); 9783319595894 (print)

Muhammad Amzar Syazani, Mohd Azli and Mahfuzah, Mustafa and Rafiuddin, Abdubrani and Amran, Abdul Hadi and S. N., Aqida and Zarith Liyana, Zahari (2018) Electromyograph (EMG) signal analysis to predict muscle fatigue during driving. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 405-420. ISBN 978-981-13-3708-6

Nabila, Tamar Jaya and Siti Rabiatull Aisha, Idris and M., Ishak (2018) A review on mechanical properties of SnAgCu/Cu joint using laser soldering. In: The Advances in Joining Technology. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 97-107. ISBN 9978-981-10-9040-0

Najwa Wahida, Zainal Abidin and M. F. F., Ab Rashid and N. M. Zuki, N. M. (2018) Optimization of multi-holes drilling path using particle swarm optimization. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 101-107. ISBN 9789811087875

Nurul Ain, Abdul Shukor and Idris, Mat Sahat and Mohd Azrul Hisham, Mohd Adib (2018) Ergonomic study on wrist rehabilitation therapy (WRist-T) device. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Lecture Notes in Mechanical Engineering, 55 . Springer Singapore, Singapore, pp. 557-563. ISBN 9789811087875

W. S., Wan Harun and Rahil Izzati, Mohd Asri and Abu Bakar, Sulong and S. A., Che Ghani and Z., Ghazalli (2018) Hydroxyapatite-Based Coating on Biomedical Implant. In: Hydroxyapatite - Advances in Composite Nanomaterials, Biomedical Applications and Its Technological Facets. InTech, pp. 69-88. ISBN 978-953-51-3805-1

Z. M., Hafizi and M. M., Noor and R., Mamat and Amir, Aziz and A. T., Termizi (2018) Finite element analysis of strand burner. In: Intelligent Manufacturing & Mechatronics: Proceedings of Symposium, 29 January 2018, Pekan, Pahang, Malaysia. Intelligent Manufacturing & Mechatronics . Springer Singapore, Singapore, pp. 705-714. ISBN 9789811087875

Conference or Workshop Item

A. F. H., Fansuri and A. N. M., Rose and M. F. F., Ab. Rashid and N. M. Zuki, N. M. and H., Ahmad (2018) Productivity Improvement Through Line Balancing at Electronic Company - Case Study. In: IOP Conference Series: Materials Science and Engineering, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering , 17–19 March 2018 , Kuala Lumpur, Malaysia. pp. 1-10., 409 (012015). ISSN 1757-899X

A. Ibrahim, Abdulwehab and Ahmed, Hazwan Aizat and Lin, Chong Perk and G. Zewge, Mesfin and A. N., Oumer (2018) Computational fluid dynamics analysis of multiphase flow in crude oil pipelines. In: Advances in Science and Engineering Technology International Conferences (ASET 2018) , 6 February-5 April 2018 , Dubai, Sharjah, Abu Dhabi, United Arab Emirates;. pp. 1-8.. ISBN 978-153862399-2

A. K., Amirruddin and K., Kadirgama and M., Samykano and D., Ramasamy and M. M., Rahman and M. M., Noor (2018) Coefficient of friction and specific wear rate prediction model using response surface methodology for waste cooking oil blended lubricant. In: 7th International Conference on Design and Concurrent Engineering IDECON 7.0 , 17 - 18 September 2018 , Kuching, Sarawak. pp. 1-14..

A. N., Oumer and Azizuddin, Abd Aziz and Noor Azirhan, Sahat (2018) Numerical investigation on effect of blade shape for stream water wheel performance. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

A. R., Razali and F. R. M., Romlay and Leong, Yap Wee and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Performance and optimum characteristics by finite element analysis of a coreless ironless electric generator for low wind density power generation. In: AIP Conference Proceedings: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-9., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Syaiful, Azlan and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Open circuit V-I characteristics of a coreless ironless electric generator for low density wind power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-7., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) Maximum power point tracking analysis of a coreless ironless electric generator for renewable energy application. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

A. R., Razali and F. R. M., Romlay and Yap, Wee Leong and Mohd Razali, Hanipah and Mohd Azri Hizami, Rasid (2018) V-I characteristics of a coreless ironless electric generator in a closed-circuit mode for low wind density power generation. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-6., 342 (1). ISSN 1757-8981

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and Stephen, Payne and Nik Abdullah, Nik Mohamed (2018) Application of asymptotic expansion homogenization for vascularized poroelastic brain tissue. In: The International Conference on Mathematics: Pure, Applied and Computation (ICOMPAC 2018) , 20 October 2018 , Hotel Majapahit, Surabaya, Indonesia. pp. 1-6.. (Unpublished)

Abdul Adam, Abdullah and M. Akmal, Adzmi and Afif, Naqiuddin (2018) Combustion characteristics of biodiesel blended with Al2O3 and SiO2 nanoparticles. In: 3rd Automotive Innovation And Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Indera Mahkota, Kuantan. pp. 1-11.. (Unpublished)

Adam, A. Y. and Oumer, A. N. and Azri, Alias and M., Ishak and R., Mamat and Abdul Adam, Abdullah (2018) Thermal and Fluid Dynamic Analysis of Compact Fin-and-Tube Heat Exchangers for Automotive Applications. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (05019). ISSN 2261-236X

Addie Irawan, Hashim and M. Aqeel, Yaacob and A. R., Razali and Sheikh Norhasmadi, Sheikh Ali and Farah Adiba, Azman and Mohd Razali, Daud (2018) Vision-based alignment control for mini forklift system in confine area operation. In: IEEE 3rd International Symposium on Agents, Multi-Agent Systems and Robotics (ISAMSR 2018) , 27 August 2018 , Putrajaya, Malaysia. pp. 1-6.. ISBN 978-1-5386-7856-5

Ahmad Shah Hizam, Md. Yasir and N. M. Zuki, N. M. (2018) Assembly Line Efficiency Improvement by Using WITNESS Simulation Software. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-11., 319 (012004). ISSN 1757-899X

Ahmed, Mohammed Ragab and A. R., Yusoff and F. R. M., Romlay (2018) Numerical Investigation of Continuous Damping of The Semi-Active Suspension System for Passenger Car. In: The International Conference on Recent Advances in Industrial Engineering and Manufacturing (ICRAIEM 2018) , 12-13 December 2018 , Penang, Malaysia. pp. 1-11..

Aishah, Safi and F., Basrawi (2018) Evaluation of the wind pumped hydropower storage integrated flood mitigation system. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-9., 342 (1). ISSN 1757-8981

Asrul, Adam (2018) Parameters optimization of surface grinding process with particles swarm optimization, gravitational search, and sine cosine algorithms: a comparative analysis. In: International Conference On Electrical, Electronic, Communication And Control Engineering (ICEECC 2018) , 28 - 29 November 2018 , KSL Hotel, Johor Bahru, Malaysia. pp. 1-8.. (Unpublished)

Azmi, W. H. and R., Mamat and Khamisah, Abdul Hamid (2018) Efficient TiO2-SiO2 hybrid nanocoolant. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Benedict, F. and K., Kadirgama and D., Ramasamy and M. M., Noor and Kumar, M. Asok Raj and M. M., Rahman and Sagmesh, B. (2018) Thermal management of vehicle radiator by nanocellulose with one-dimensional analysis. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020043). ISBN 978-0-7354-1787-8

Ch'Ng, S. Q. and Nasir, S. M. and Fathullah, M. and Noriman, N. Z. and Mohd Sazli, Saad (2018) Warpage analysis on thick shell part using response surface methodology (RSM) and bat algorithm (BA) to optimize parameter setting in injection molding process. In: AIP Conference Proceedings; 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29 - 30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh, Vietnam. pp. 1-2., 2030 (020167). ISSN 0094-243X ISBN 9780735417526

Chin, Siew Choo and Doh, Shu Ing and Jolius, Gimbun and Siregar, J. P. and Foo, S. Tong and Huey, R. Ong (2018) Strengthening performance of PALF-epoxy composite plate on reinforced concrete beams. In: IOP Conference Series: Materials Science and Engineering, MUCET 2017 , 6-7, December 2017 , Batu Feringgi, Penang. pp. 1-8., 318 (1). ISSN 1757-899X (online)

D., Ramasamy and K., Kadirgama and Neshabran, Ramachandran and W. H., Azmi (2018) Analysis of dynamic viscosity via experiment and empirical correlation through response surface methodology (rsm) for cellulose nanocrystal (cnc) dispersed in ethylene glycol- water mixture. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

D., Ramasamy and M. M., Rahman and K., Kadirgama and M. M., Noor and Azmi, W. H. and Mahendran, Samykano and W. S., Wan Harun (2018) Green engine coolant (GEC): cellulose nanocrystals as engine coolant process. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Daing Mohamad Nafiz, Daing Idris and Ahmad Fitri, Yusop and F., Basrawi and Mohd Azri Hizami, Rasid and Muhammad Hadi, Hassan and Samad, Rahin (2018) Chassis dynamometer to analyse performance of electric two wheelers (ETW). In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Submitted)

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Daing Mohamad Nafiz, Daing Idris and Khairul, Habib and Mohd Hazwan, Yusof (2018) Analysis on the Performance of a Prototype of Thermoelectric based Power Generation System. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02019). ISSN 2261-236X

Elghool, Ali and F., Basrawi and Hassan, Ibrahim and Thamir K., Ibrahim and Shaharin, A. Sulaiman and M., Ishak (2018) Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (04009). ISSN 2261-236X

F., Wasbari and R. A., Bakar and Gan, Leong Ming and M. F., Sukri and H. N. M., Shah (2018) The effects of multiple storages on performance of hydro-pneumatic hybrid driveline. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 277-278.. ISBN 9789672145202

F. A., Adnan and F. R. M., Romlay and Nasir, Shafiq (2018) Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-8., 342 (1). ISSN 17578981

F. T., Pawi and Rosdi, Daud and Kurniawan, Tedi and Siti Haryani, Tomadi and Salwani, Mohd Salleh and A., Shah (2018) Design and analysis of lightweight polyetheretherketone (PEEK) front lower control arm. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Faeiz Azizi, Adnan and F. R. M., Romlay (2018) Contour generation algorithm for Projection Mask Stereolithography 3D printing process. In: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8..

H. M., Mahmudul and Hagos, F. Y. and M. Mukhtar, N. A. and R., Mamat and Abdul Adam, Abdullah (2018) Effect of alcohol on diesel engine combustion operating with biodiesel-diesel blend at idling conditions. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-10., 318 (1). ISSN 17578981 (print);1757-899X (online)

Hagos, F. Y. and M. Mukhtar, N. Awalludin and M. M., Noor and R., Mamat and Abdul Adam, Abdullah (2018) Environmental-friendly tri-fuel emulsion. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

Hanafi, M. Yusop and M. F., Ghazali and M. F. M., Yusof and M. A., Pi Remli (2018) Fault identification in pipeline system using normalized hilbert huang transform and automatic selection of intrinsic mode function. In: MATEC Web of Conferences: 3rd International Conference on Design and Manufacturing Engineering, ICDME 2018 , 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-6.. ISSN 2261236X

Hanafi, M. Yusop and M. F., Ghazali and W. H., Azmi and M. F. M., Yusof and M. A., PiRemli and M. A., A. Rahim (2018) Exploration of ikaz and normalized hilbert transform for solving faulty in pipeline distribution system using transmission line modelling. In: 1st International Postgraduates Conference On Mechanical Engineering (IPCME) 2018 , 31 Oktober 2018 , UMP Pekan. pp. 1-9.. (Unpublished)

Hassan, Md Mahmudul and Hagos, F. Y. and R., Mamat (2018) Comparative analysis of diesel, diesel-palm biodiesel and diesel-biodiesel-butanol blends in diesel engine. In: ASME Proceedings: 12th International Conference on Energy Sustainability , 24-28 June 2018 , Lake Buena Vista, Florida, USA. pp. 1-11. (ES2018-7571). ISBN 978-0-7918-5141-8

Hazwan, M. H.M. and Shayfull, Z. and Mohd Rashidi, Maarof and Nasir, S. M. and Noriman, N. Z. (2018) Warpage optimization on front panel housing by using glowworm swarm optimization (GSO) approach. In: AIP Conference Proceedings; 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29 - 30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh, Vietnam. pp. 1-2., 2030 (020151). ISSN 0094-243X ISBN 9780735417526

Hyder, Farhan and Baredar, Prashant and Sudhakar, K. (2018) A novel Sun tracking technique through a Solar PV Tree and a smart controller. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 407-411.. ISBN 978-1-5386-3695-4

I. M., Zulhilmi and Mohamad Heerwan, Peeie and I. M., Izhar and S. M., Asyraf and R. I. M., Eiman (2018) The investigation of vehicle dynamic behaviour during braking at different speed. In: 3rd International Conference On Design And Manufacturing Engineering (ICDME2018) , 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-11.. (Unpublished)

K., Kadirgama and Kaaliarasan, Ramachandran and D., Ramasamy and W. H., Azmi and Mahendran, Samykano (2018) Elucidation and model development of thermal conductivity analysis for cellulose nanocrystal (CNC) based nanofluid. In: 26th Annual international conference on composites or nano engineering , 14 - 22 Julai 2018 , France. pp. 1-3.. (Unpublished)

Kananathan, Jeeven and Samykano, Mahendran and Sudhakar, K. and Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and Manoj Kumar, Nallapaneni and W. K., Ngui and K., Kadirgama and Azmi, W. H. and W. S., Wan Harun (2018) Nanofluid as coolant for grinding process: An overview. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-16., 342 (012078). ISSN 1757-8981 (Print), 1757-899X (Online)

Kavin, J. and Azam, M. and Ahmad, A. H. and Shayfull, Z. and Mohd Rashidi, Maarof (2018) Effect of degassing addition on the corrosion of nickel aluminum bronze. In: AIP Conference Proceedings: Green Design And Manufacture: Advanced And Emerging Applications: Proceedings of the 4th International Conference on Green Design and Manufacture 2018 , 29-30 April 2018 , Ho Chi Minh, Vietnam. pp. 1-7., 2030 (020147). ISSN 0094-243X ISBN 978-0-7354-1752-6

Kumar, Nallapaneni Manoj and Sudhakar, K. and Mahendran, Samykano (2018) Estimation of solar collector area for water heating in buildings of Malaysia. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 01-02 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. p. 1., 342 (1). ISSN 17578981 (Unpublished)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Hyder, Farhan (2018) BIPV power plants and policy recommendatons. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 652-655.. ISBN 978-1-5386-3695-4

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, Mahendran and Jayaseelan, V. (2018) BIPV market growth: SWOT Analysis and favorable factors. In: 4th International Conference on Electrical Energy Systems (ICEES 2018) , 7-9 February 2018 , Chennai, India. pp. 412-415.. ISBN 978-1-5386-3695-4

Luqman, Abdul Halim and Firdaus, Basrawi and Chong, Jia Zheng and Oumer, A. N. and Ahmmad Shukrie, Md Yudin and Mohd Hazwan, Yusof and Shaharin, A Sulaiman (2018) Preliminary study on drying of stingless bee pot pollen using novel fluidized bed dryer with swirling distributor. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-5., 225 (04007). ISSN 2261-236X

M., Ishak and M. N. M., Salleh (2018) Double fillet lap of laser welding of thin sheet AZ31B Mg alloy. In: International Laser Technology and Optics Symposium (ILATOS 2017) , 26-28 September 2017 , Pulai Spring Resort, Johor Bahru. pp. 1-6., 1027 (1). ISSN 17426588

M., Ishak and M. N. M., Salleh and Aiman, Mohd Halil and A. M., Hanafi (2018) Investigation on the weld geometry of fiber laser dissimilar welded of boron steel for TWB application. In: Joining and Welding Symposium 2018 (JWS 2018) , 23 October 2018 , Library, UMP Pekan. pp. 1-10.. (Unpublished)

M. A., Yunus and M. N., Abdul Rani and M. S. M., Sani and M. A. S., Aziz Shah (2018) Finite element model updating of riveted joints of simplified model aircraft structure. In: AIP Conference Proceedings: International Conference on Electrical, Electronics, Materials and Applied Science (ICEEMAS) , 21-24 December 2017 , Secunderabad, Telangana, Hyderabad, India. p. 1., 1952. ISSN 0094-243X

M. F., Fariz and C. K., Ihsan and M. M., Noor and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. T., Hoang (2018) Performance and emission characteristic of compression ignition engine using blend of diesel and canola oil. In: The 7th International Conference On Design And Concurrent Engineering 2018 (IDECON 2018) , 17-18 September 2018 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

M. F., Ghazali and Muhammad Hanafi, Yusop and Mohd Fadhlan, Mohd Yusof and Muhammad Aminuddin, Pi Remli and Abdul Malik, Awang Hamat (2018) Leak locator (rig to real). In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

M. N., Harith and R. A., Bakar and D., Ramasamy and K., Kadirgama and Ma, Quanjin (2018) A study of waste and delivery valve design modification to the pump performance. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-12., 342 (012090). ISSN 1757-8981 (Print), 1757-899X (Online)

M. N. M., Merzuki and M. R. M., Rejab and Bachtiar, Dandi and Siregar, J. P. and M. F., Rani and Salwani, Mohd Salleh (2018) Finite Element Simulation of Aluminium/GFRP Fibre Metal Laminate under Tensile Loading. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-6., 318 (012072). ISSN 1757-8981

M. R. M., Rejab and Ma, Quanjin and M. S., Idris and Mohamad Nazirul Mubin, Merzuki (2018) i -Winder: portable filament winding machine. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. . (Unpublished)

Ma, Quanjin and M. R. M., Rejab and Kaige, Jiang and M. S., Idris and M. N., Harith (2018) Filament winding technique, experiment and simulation analysis on tubular structure. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-15.. (Unpublished)

Mahendran, Samykano and R. V., Mohana Sundram and K., Sudhakar and S. G., Ponnabalam (2018) Nickel nanowire: magnetic ordering synthesis. In: International Conference on Advanced Nano Materials (ANM, 2018) , 18 - 20 July 2018 , University of Aveiro, Portugal. p. 1.. (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud and A., Shah and M. H. M., Hazwan and Siti Haryani, Tomadi and Salwani, Mohd Salleh (2018) Effect of thermal oxidation and carbon concentration on Co-Cr-Mo alloy in enhanced corrosion protection. In: Materials Science Forum, 6th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2017 and 2nd International Conference on Materials Technology and Applications, ICMTA 2017 , 26-29 Oktober 2017 , Tokyo, Japan. pp. 1-7.. ISSN 02555476 ISBN 978-303571201-8

Mas Ayu, Hassan and Rosdi, Daud and Sudin, Izman and A., Shah and Mahmood, Anwar and Kurniawan, Tedi and Juliawati, Alias (2018) Improving biocompatibility of cobalt based alloy using chemical etching and mechanical treatment. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering , 14 - 15 November 2018 , Melaka, Malaysia. pp. 1-6.. (Unpublished)

Mohamad Heerwan, Peeie and S. M., Asyraf and Muhammad Izhar, Ishak (2018) The comparison respond of braking torque control between PID and SMC controller for electric powered wheelchair descending on slope condition. In: International Conference on Innovative Technology, Engineering and Sciences, iCITES 2018 , 01-02 March 2018 , Universiti Malaysia Pahang. pp. 1-9., 342 (1). ISSN 17578981

Mohd Akramin, Mohd Romlay and M. N. M., Husnain (2018) Sampling model in engineering analysis software for surface cracked structure. In: 7th International Conference on Computer Engineering and Mathematical Sciences 2018 (ICCEMS 2018) , 27 - 28 December 2018 , Langkawi, Malaysia.. p. 1.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni and Narimah, Daud and Nor Shahizan, Mohd Redzuan (2018) Enhancing the WRist-T device using touchscreen panel for traumatic brain injury patient. In: IEEE-EMBS Conference On Biomedical Engineering And Sciences (IECBES 2018) , 3 - 6 Disember 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-5.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Nurul Najihah, Mohd Nazri and Nur Hazreen, Mohd Hasni (2018) Phase contrast-MRI Integrated CFD Simulation: effect of Cthres on blood flow fields for patient- specific cerebrovascular. In: 7th International Workshop on Innovative Simulation for Health Care, IWISH 2018 , 17 - 19 Sep 2018 , Danubius Health Spa Resort Margitsziget Budapest, Hungary. pp. 1-7.. ISBN 978-888574115-7

Mohd Fathuddin, Mohd Sunif and Mohd Noor Firdaus, Haron and F. R. M., Romlay (2018) Heat energy modelling of travelling wave piezoceramic ultrasonic motor. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (01009). ISSN 2261-236X

Mohd Hafizil, Mat Yasin and Ahmad Fitri, Yusop and R., Mamat and Abdul Adam, Abdullah and N. H., Badrulhisham (2018) Comparison of the Cyclic Variation of a Diesel-Ethanol Blend in a Diesel Engine. In: IOP Conference Series: Earth and Environmental Science, 9th International Conference on Environmental Science and Technology , 20-22 June 2018 , Prague, Czech Republic. pp. 1-7., 182 (012020). ISSN 1755-1315

Mohd Haslizam, Abdullah and Saiful Anwar, Che Ghani and Siti Rohaida, Mohamed (2018) Experiment and Numerical Studies on Heat Loss in a Hydro-Distillation with Various Insulations. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-7., 225 (02014). ISSN 2261-236X

Mohd Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2018) Diesel engine performance operating with tire derived fuel. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. pp. 1-7., 225. ISSN 2261-236X

Mohd Jamil Mohamed, Mokhtarudin and Abbas, Shabudin and Dokos, Socrates (2018) Computational model of left ventricle infarct remodelling during passive filling phase. In: IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2018) , 3 - 6 December 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-10.. (Unpublished)

Mohd Jamil Mohamed, Mokhtarudin and Abbas, Shabudin and Payne, Stephen J. (2018) Brain tissue swelling during ischaemia-reperfusion: 2D finite element analysis using poroelasticity. In: 4th International Conference On Science, Engineering and Environment , 12 -14 November 2018 , Meitetsu New Grand Hotel, Nagoya. pp. 1-6.. (Unpublished)

Mohd Rashidi, Maarof and Kavin, J. and Mohammad, Azam and Hadi, Agung Efriyo and Zamree, Shayfull (2018) Effect of degassing addition on the solidification of nickel aluminum bronze. In: 4th International Conference on Green Design and Manufacture 2018, IConGDM 2018 , 29-30 April 2018 , Eden Star Saigon Hotel, Ho Chi Minh; Viet Nam. pp. 1-5., 2030. ISSN 0094243X ISBN 978-073541752-6

Mohd Syazwan, Mohd Zin and M. N., Abdul Rani and Mohd Azmi, Yunus and M. S. M., Sani and W. I. I., Wan Iskandar Mirza and Ahmad Azlan, Mat Isa (2018) Frequency response function (FRF) based updating of a laser spot welded structure. In: International Conference on Electrical, Electronics, Materials and Applied Science 2017 , 22-23 December 2017 , Swami Vivekananda Institute of Technology (SVIT)Secunderabad, Telangana; India. , 1952. ISSN 0094-243X ISBN 978-073541647-5

Mohd Yusof, Taib and F., Basrawi and Shahrani, Anuar and Hassan, Ibrahim (2018) The Effect of Flowrate and Effectiveness on Theoretical Design and Thermal Characteristic of a GHE. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-8., 225 (01023). ISSN 2261-236X

Muhamad Arif, Abdullah and M. F. F., Ab. Rashid and Z., Ghazalli and N. M. Z., Nik Mohamed and A. N., Mohd Rose (2018) Modelling of Assembly Sequence Planning Problem using Base Part Concept. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Green Design and Manufacture 2018 , 29-30 April 2018 , Ho Chi Minh, Vietnam. pp. 1-6., 2030 (020013). ISBN 978-0-7354-1752-6

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2018) The effect of tube length, cold exit diameter and high temperature of working gas on the cold flow temperature of vortex tube. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang. pp. 1-9.. (Unpublished)

Muhammad Hadi, Hassan and Syazwana, Sapee and Daing Mohamad Nafiz, Daing Idris and Ahmad Fitri, Yusop and F., Basrawi and Azri Hizami, Rasid (2018) Chassis dynamometer for electric two wheelers. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-5., 225 (03016). ISSN 2261-236X

N., Chik and Salwani, Md Zain and Ahmad Johari, Mohamad and Mohd Zaidi, Sidek and Wan Hanisah, Wan Ibrahim and Reif, Alexandra and Rakebrandt, J.H. and Pfleging, W. and Liu, X. (2018) Bacterial adhesion on the titanium and stainless-steel surfaces undergone two different treatment methods: polishing and ultrafast laser treatment. In: 3rd International Conference on Global Sustainability and Chemical Engineering, ICGSCE 2017 , 15-16 February 2017 , Marriot Hotel, Putrajaya; Malaysia. pp. 1-7., 358 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

N. A., Nazri and M. S. M., Sani and M. N., Abdul Rani and M. A., Yunus (2018) Joining strategy analysis of structural dynamic in top hat plate of dissimilar materials. In: International Conference On Noise, Vibration and Comfort (NVC 2018) , 5-7 March 2018 , Putrajaya Dorset, Putrajaya. pp. 1-9.. (Unpublished)

N. F., Abdullah and Abbas, A. Wahab and Mohd Azri Hizami, Rasid (2018) Study of temperature rise in small brushed DC motor components under different voltage. In: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8..

N. Fatimah, Abdullah and Abbas A., Wahab and Mohd Azri Hizami, Rasid (2018) Study of temperature rise of small brushed DC motor under different load. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Perpustakaan UMP Pekan. pp. 1-6., 225.

N. K., Romli and M. R. M., Rejab and Bachtiar, Dandi and J. P., Siregar and Salwani, Mohd Salleh and M.F, Rani and Mohamad Nazirul Mubin, Merzuki (2018) Failure behaviour of aluminium/CFRP laminates with varying fibre orientation in quasi-static indentation test. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-7., 319 (1). ISSN 17578981

N. W., Awang and D., Ramasamy and M. M., Rahman and M. M., Noor and K., Kadirgama (2018) Wear testing analysis on cylinder head valve for CNG fueled engine. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. p. 1.. (Unpublished)

Nazrin, Mokhtar and Gebremariam, M.A. and Mohd Hafizi, Zohari and Azmir, Azhari (2018) Analysis of acoustic emission during abrasive waterjet machining of sheet metals. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981

Ngu, Tai Tieng and Hagos, F. Y. and A. Rashid, A. Aziz and R., Mamat (2018) CFD modelling of combustion of CNG and hydrogen-rich syngas under a dual fueling strategy. In: 5th International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications , 18 - 20 Julai 2018 , University of Aveiro, Portugal. pp. 1-19.. (Unpublished)

Norhafana, M. and M. M., Noor and M. Sharif, Pshtiwan and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2018) An update on nano additive in diesel fuel. In: International Postgraduate Conference On Mechanical Engineering , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-51.. (Unpublished)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2018) Thermal analysis of aluminium 7075 prior to semisolid metal processing. In: The 4th International Conference On Green Design And Manufacture , 29 April - 30 April 2018 , Ho Chi Minh, Vietnam. p. 1., 2030 (1).

Nurul A’in, Nadzri and M., Ishak and Mohd Mawardi, Saari and Aiman, Mohd Halil (2018) Development of eddy current testing system for welding inspection. In: 9th IEEE Control And System Graduate Research Colloquium (ICSGRC 2018) , 3-4 August 2018 , Shah Alam, Selangor. pp. 94-98.. ISBN 978-1-5386-6321-9

P., Moorthy and A. N., Oumer and M., Ishak (2018) Experimental investigation on effect of fin shape on the thermal-hydraulic performance of compact fin-and- tube heat exchangers. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (1). ISSN 1757-899X (online)

R., Rosli and Priyandoko, Gigih and Zamri, Mohamed (2018) Simulation of an active force control scheme for a semi active seat suspension system using MR damper. In: International Conference On Science, Engineering & Technology (I-SET 2018) , 2 - 3 May 2018 , UNMUHA Convention Centre, University of Muhammadiyah (UNMUHA) Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

Rao, N. Thiwaan and Oumer, A. N. and Devandran, G. and M. M., Noor (2018) Investigation on Flow and Heat Transfer of Supercritical CO2 in Helical Coiled Tubes at Various Supercritical Pressures. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-10., 225 (01018). ISSN 2261-236X

Reza, M. S. and S. N., Aqida and I., Ismail (2018) Laser surface modification of Yttria Stabilized Zirconia (YSZ) thermal barrier coating on AISI H13 tool steel substrate. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-4., 319 (1). ISSN 17578981

Rosdi, Daud and Mas Ayu, Hassan and Siti Haryani, Tomadi and Salwani, Mohd Salleh and S., Suaidah and Arman Shah, Abdullah and Mohammed Rafiq, Abdul Kadir (2018) Neural network as an assisting tool in designing talus implant. In: 6th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2017 and 2nd International Conference on Materials Technology and Applications, ICMTA 2017 , 26-27 October 2017 , Tokyo; Japan. pp. 153-160., 916. ISSN 0255-5476 ISBN 978-303571201-8

S. K., Abu Bakar and Rosdi, Daud and Mas Ayu, Hassan and Salwani, Mohd Salleh and A., Shah (2018) Prediction of fatigue failure location on lower control arm using finite element analysis (Stress Life Method). In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering , 14 - 15 November 2018 , Melaka, Malaysia. pp. 1-6.. (Unpublished)

S. M., Asyraf and Mohamad Heerwan, Peeie and I. M., Izhar and I. M., Zulhilmi and J. M., Zikri and S. C., Hern (2018) Parameters estimation and calibration of bldc motor for electric powered wheelchair. In: International conference on science, engineering and technology (I-SET 2018) , 2 - 3 May 2018 , Convention Centre, University of Muhammadiyah (UNMUHA) Banda Aceh, Indonesia. pp. 1-7.. (Unpublished)

S.M., Asyraf and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak (2018) Skid control enhancement for small electric vehicle by using sliding mode control strategy. In: SICE International Symposium on Control Systems (SICE ISCS 2018) , 9-11 March 2018 , Setagaya Campus, Tokyo City University, Tokyo, Japan. pp. 151-156.. ISBN 978-490776458-6

SM Shahrul Nizan, Shikh Zahari and Nik Fatin Nabilah, Muhammad Nordin and Muhamad Syukur, Kamarudin and Mus'ab, Sahrim and Mohd Muzamir, Mahat and Hazeeq Hazwan, Azman and Ramli, Junid and Nor Azam, Endot (2018) Poly(vinylpyrrolidinone)-iron magnetic nanocomposites as sorbents for effective oil removal from water. In: International Conference on Recent Advancements in Science and Technology (ICoRAST 2017) , 7-8 November 2017 , Novotel Hotel, Melaka. pp. 1-6., 1972 (1). ISSN 0094-243X (Print); 1551-7616 (Online) ISBN 978-073541679-6

Samykano, Mahendran and Santhip, - and W. K., Ngui and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2018) Magnetic nanowires (Ni) via chemical reduction method. In: 3rd International Conference on Automotive Innovation and Green Energy Vehicle (AIGEV 2018) , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-8.. (Unpublished)

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) Preliminary investigations of Acrylonitrile Butadiene Styrene (ABS) properties. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8.. (Unpublished)

Selvamani, Sathish Kumar and Subramaniam, Shathiswara Rao and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and Kanagaraj, G. (2018) 3D Printing: Overview of ABS Evolvement. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10.. (Submitted)

Sheng, Annie Lau and I., Ismail and S. N., Aqida (2018) Effect of laser parameters on surface roughness of laser modified tool steel after thermal cyclic loading. In: IOP Conference Series: Materials Science and Engineering, The 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-5., 319 (012002). ISSN 1757-8981 (Print), 1757-899X (Online)

Sin Jian, E. L. and Rosdi, Daud and Mas Ayu, Hassan and M. H., Yusoff and Jamiluddin, Jaafar and A., Shah (2018) Application of a finite element method to predict fatigue life of the knee mobile bearing. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018; Universiti Malaysia Pahang , 31 October 2018 , UMP Pekan, Pahang. p. 1., 469 (1). ISSN 17578981

Siti Rabiatull Aisha, Idris and Nabila, T. J. and M., Ishak (2018) Effect of different parameters of fibre laser soldering on interfacial reaction and wetting angle of two types of lead-free SAC305 solder fabrication on cu pad. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. p. 1., 469 (012117).

Sivaraos, . and A. Z., Khalim and M. S., Salleh and D., Sivakumar and K., Kadirgama (2018) Mamdani-Fuzzy Modeling Approach for Quality Prediction of Non-Linear Laser Lathing Process. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-9., 318 (012067). ISSN 1757-899X

Sivaraos, . and Khalim, A. Z. and Salleh, M. S. and D., Sivakumar and K., Kadirgama (2018) Sugeno-Fuzzy Expert System Modeling for Quality Prediction of Non-Contact Machining Process. In: IOP Conference Series: Materials Science and Engineering, Malaysian Technical Universities Conference on Engineering and Technology 2017 (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-8., 318 (012066). ISSN 1757-8981 (Print), 1757-899X (Online)

Subramaniam, Shathiswara Rao and Selvamani, Sathish Kumar and W. K., Ngui and Samykano, Mahendran and K., Kadirgama and K., Sudhakar (2018) 3D Printing: Overview of PLA Progress. In: The 3rd International Conference on Automotive Innovation Green Energy Vehicle (AiGEV 2018) , 25 - 26 Julai 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10.. (Unpublished)

Sudhakar, K. and Mahendran, Samykano and Ria, - (2018) Performance of utility scale PV Plant in Malaysia and India: a comparative study. In: 4th International Conference on Electrical Energy Systems (ICEES) 2018 , 7-9 Feb 2018 , Chennai, India. pp. 106-110..

Suhailah, Sujali and Mohd Rusllim, Mohamed and Oumer, A. N. and Azizan, Ahmad and Leung, P. (2018) Study on architecture design of electroactive sites on Vanadium Redox Flow Battery (V-RFB). In: International Conference on Renewable Energy and Environment Engineering (REEE 2018) , 29-31 October 2018 , Paris, France. pp. 1-5..

Sunny, Kalakanda Alfred and Kumar, Pradeep and Kumar, Nallapaneni Manoj and Veena, A. and G. J., Adheena (2018) Two blade vertical axis wind turbine: investigations on the torque generation at different rotational velocities. In: 2nd International Conference on Advancements in Aeromechanical Materials for Manufacturin (ICAAMM 2018) , 13-14 July 2018 , Telangana, India. pp. 1-6., 455 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Syazwana, Sapee and Ahmad Fitri, Yusop and Mohammad Nazri, Mohd Jaafar and R., Mamat and Wan Asma, Ibrahim and Hazir, Farouk and Norwazan, Abdul Rahim and lyia Syafira, Ab Razak and Muhammad Syahiran, Abdul Malik and Zhang, B. (2018) Synthesis of non-edible biodiesel from crude jatropha oil and used cooking oil. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (06008). ISSN 2261-236X

Syazwana, Sapee and Daing Mohamad Nafiz, Daing Idris and Ahmad Fitri, Yusop and F., Basrawi and Azri Hizami, Rasid and Muhammad Hadi, Hassan and Jiang, X. X. (2018) A review on electric two wheelers. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (03014). ISSN 2261-236X

Tai, K. Siang and Anusuiah, Vasu and Hagos, F. Y. and M. M., Noor and R., Mamat and K., Kadirgama and Azmi, W. H. and Samykano, Mahendran and Sharma, Ravi Kumar (2018) Effect of loading temperature on thermophysical properties of paraffin wax as PCM for thermal energy storage. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 55..

Teo, S. H. and Gan, H. L. and Azri, Alias and Gan, Leong Ming (2018) Internally Heated Screw Pyrolysis Reactor (IHSPR) heat transfer performance study. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981

W. X., Hong and A. N., Oumer and F., Basrawi and R., Mamat and Abdul Adam, Abdullah (2018) Investigation on heat transfer characteristics and flow performance of methane at supercritical pressures. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES2018) , 1-2 March 2018 , Perpustakaan UMP Pekan, Universiti Malaysia Pahang. pp. 1-9.. ISSN 1757-8981 (Print), 1757-899X (Online)

Z. M., Hafizi and A. M., Aizzuddin and Vorathin, E. (2018) Development of fibre bragg grating (FBG) based pressure transducer with temperature compensation. In: 6th International Conference On Noise, Vibration And Comfort , 05 - 07 Mac 2018 , Putrajaya Dorset, Putrajaya. pp. 1-6.. (Unpublished)

Z. M., Hafizi and Muhammad Aizzuddin, Abdullah and Vorathin, E. and Aziman, Abdullah (2018) Fast response fibre bragg grating (FBG) pressure transducer. In: 29th International Invention, Innovation & Technology Exhibition, Malaysia , 2-4 May 2018 , Kuala Lumpur Convention Centre, Malaysia. p. 1.. (Unpublished)

Zamri, Mohamed and Che Ku Eddy Nizwan, Che Ku Husin and Mohd Razali, Hanipah (2018) Vibration assessment on plant blower structure. In: 47th International Congress and Exposition on Noise Control Engineering , 26 - 29 Ogos 2018 , Chicago USA. pp. 1-6.. (Unpublished)

Thesis

Awad, Omar Ibraheem (2018) The effects of fusel oil water content reduction on performance and emissions of SI engine with fusel oil – gasoline blended fuel. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Alia, Fauzi (2018) Pack cementation of high chromium steel for high temperature application in steam condition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Farah Ayuni, Fauzi (2018) Development of hybrid natural/synthetic fiber reinforced polymer composite of recurve bow riser for Malaysian junior athletes. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ganesan, Kadirgama (2018) Thermophysical evaluation of nanocellulose as a new coolant for radiator. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Hassan, Md Mahmudul (2018) Investigation of the effect of butanol and ethanol alcohols on the combustion, performance and emission of diesel-biodiesel blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Maizatul Asnida, Hassan (2018) Tribological behaviour of copper (II) oxide nanoparticles based lubricant to improve durability of contact surface. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Makeen, Mohd Amin (2018) Leak detection in medium density polyethylene pipe using ensemble empirical mode decomposition method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Fairusham, Ghazali).

Mohamad Redhwan, Abd Aziz (2018) Performance analysis of aluminimum oxide/polyalkylene glycol nanolubricant in automotive air conditioning system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hafizil, Mat Yasin (2018) Investigation on cyclic variations of a diesel engine operating with alcohols and biodiesel blends. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Muhammad Hanafi, Yusop (2018) Transient analysis for leak signature identification based on Hilbert Huang transform and integrated kurtosis algorithm for z-notch filter technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Nabil Fikri, Mohamad (2018) Investigation on thermo-physical properties and thermal-hydraulic performance of TiO2-SiO2 nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Muhammad Yusri, Ismail (2018) Predicting engine performance and exhaust emissions of a spark ignition engine fuelled with 2-butanol-gasoline blends using RSM and ANN models. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Zakiah, Md Zaid (2018) Mechanical performance of lightweight sandwich structures based on trapezoidal corrugated-cores. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Nur Khaleeda, Romli (2018) Quasi-static and low-velocity impact response on fibre metal laminate. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hidayah, Othman (2018) Effect of shoulder to pin diameter ratio on mechanical and microstructural properties of friction stir welded magnesium alloy AZ31B. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Husna, Zakaria (2018) Ergonomics study on workers in electrical industry by using simulation analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Rahil Izzati, Mohd Asri (2018) Thermal oxidation and hydroxyapatite coating of SLMed 316L stainless steel substrates. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Thiwaan Rao, Narasimma Naidu (2018) Flow and heat transfer characteristics of supercritical carbon dioxide in mini-channels. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zahidah, Ansari (2018) Sandwich square honeycomb structure from biodegradable and recyclable composites. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulhishamuddin, Abd Rahman (2018) Laser surface modification of Cr-MO powders on grey cast iron for surface properties improvement. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).