Items where Division is "College of Engineering" and Year is 2021
 | Up a level |
Putra Jaya, Ramadhansyah, ed. (2021) Modern Materials and Technologies for Civil and Road Engineering. Trans Tech Publications Ltd, Switzerland. ISBN 1013-9826
A., Nugroho and Z., Bo and R., Rizalman and W. H., Azmi and G., Najafi and F., Khoirunnisa (2021) Extensive examination of sonication duration impact on stability of Al2O3-Polyol ester nanolubricant. International Communications in Heat and Mass Transfer, 126 (105418). pp. 1-14. ISSN 0735-1933. (Published)
A. A., Manea and A. R., Radzi and R. A., Rahman and A. T., Haron (2021) Strategies for virtual teams in construction: Easiness-effectiveness analysis. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual Confoncerence, Universiti Malaysia Pahang, Malaysia. pp. 1-12., 641 (012009). ISSN 1755-1307 (Published)
A. A. G., Nadiatul Adilah and H., Hannani (2021) Comparison of methods to estimate missing rainfall data for short term period at UMP Gambang. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012027). ISSN 1755-1307 (Published)
A. S., Saud and M. S., Ahmad and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim (2021) Study of solvent effect on dispersion of LT/Al2O3 catalyst for facile synthesis of cyclic carbonate from renewable sugar. In: 1st International Conference (Virtual) on Sustainable Energy and Catalysis , 16 -17 Feb. 2021 , Virtual. pp. 36-37.. ISBN 978-967-2401-46-9 (Published)
AL-Amri, Mohammed Amer Omar and Razali, Muda (2021) Development of a microcontroller-based gas detection system using wireless sensor network. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and El-Bouri, Wahbi K. and Payne, Stephen J. and Wan Naimah, Wan Ab Naim and Nik Abdullah, Nik Mohamed (2021) Multiscale Modelling of 3-Dimensional Brain Tissue with Capillary Distribution. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi, Malaysia. pp. 1-4.. (Published)
Abdul, Wahab and Muzamir, Hasan and Ud Din, Zaheer and Zaman, Qamar Uz (2021) Heavy metals concentration in undisturbed peat soil at Pekan District, Pahang, West Malaysia. Maejo International Journal of Energy and Environmental Communication, 3 (2). pp. 23-31. ISSN 2673-0537. (Published)
Abdulah, Nayeem and Mohd Faizal, Ali and Jun Haslinda, Shariffuddin (2021) Synthesis and applications of inverse vulcanized polysulfides from bio-crosslinkers. Material Today: Proceedings, 47 (19). ISSN 2214-7853. (In Press / Online First) (In Press / Online First)
Abdullah, Baqadeem Abdullah Omar and F. M., Jakarni and A. K. S., Al-Shakhrit and Khairil Azman, Masri (2021) The usage of recycled glass in hot mix asphalt: A review. Construction, 1 (1). pp. 29-34. ISSN 2785-8731. (Published)
Abdulwahid, Omar Arman (2021) Numerical investigation of exhaust gas reforming of natural gas for on-board hydrogen-rich syngas production in spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).
Adam, Khalid and Izzeldin, I. Mohd and Ibrahim, Younis (2021) A selective mitigation technique of soft errors for DNN models used in healthcare applications: DenseNet201 case study. IEEE Access, 9 (9419032). 65803 -65823. ISSN 2169-3536. (Published)
Adam Ismail Hammad, Khalid and Mohamed Abdelaziz, Izzeldin Ibrahim and Younis, Younis M. (2021) The impact of the soft errors in convolutional neural network on GPUS: Alexnet as case study. Procedia Computer Science, 182. pp. 89-94. ISSN 1877-0509. (Published)
Adarsh Kumar, Pandey and Reji, Kumar. R and M., Samykano (2021) Solar energy: direct and indirect methods to harvest usable energy. Dye-Sensitized Solar Cells Emerging Trends and Advanced Applications. pp. 1-24. ISSN 978-0-12-818206-2. (Published)
Afiqah, Yeop and Jessinta, Sandanasamy and Pang, Sook Fun and Jolius, Gimbun (2021) Stability and controlled release enhancement of Labisia pumila's polyphenols. Food Bioscience, 41 (101025). pp. 1-13. ISSN 2212-4292. (Published)
Afkar Rabbani Hidayatullah, Hipeni and Intan Syahiera, Azli and Khairatun Najwa, Mohd Amin (2021) Biodegradability of cellulose nanocrystal/thermoplastic polyurethane nanocomposite. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Ahmad Azzreen, Dalawi (2021) Analysis and study of powerefficient sar adc for active rfid sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Samsuri, Fahmi).
Ahmad Firdaus, Ilias and Mohd Azrul Hisham, Mohd Adib and Muhammad Nor Hakim, Hassan and Muhammad Mirza, Mustapah and Muhammad Alif Aiman, Jamaludin and Sheh Hong, Lim (2021) ReFlex gamification for cerebral palsy kids. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Ahmad Razlan, Yusoff (2021) UMP strategic relationship with cluster schools, Velionne Racing makes the country proud. UMP News .
Ahmad Razlan, Yusoff and Mimi Rabita, Abdul Wahit (2021) Hubungan strategik UMP dengan sekolah kluster, pasukan Velionne harumkan nama negara. UMP News .
Aidil Redza, Khan and Mohd Faizal, Jamlos and Nurmadiha Osman, Osman and Muhammad Izhar, Ishak and Fatimah, Dzaharudin and You Kok, Yeow and Khairil Anuar, Khairi (2021) DSRC Technology in Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) IoT System for Intelligent Transportation System (ITS): A Review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 97-106. ISBN 978-981-33-4597-3
Aidil Redza Khan, Mohamed Amir Khan (2021) Development of collision avoidance application using internet of things (loT) technology for vehicle-to-vehicle (v2v) and vehicle-to-infrastructure (v21) communication system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).
Aiman A., Mokaizh and Jun Haslinda, Shariffuddin (2021) Synthesis of α-alumina developed from waste aluminium using precipitation technique. In: Journal of Physics: Conference Series, The 1st International Conference on Fundamental, Applied Sciences and Technology (ICoFAST 2021) , 15-16 March 2021 , Perlis, Malaysia, & Hadhramout, Yemen. pp. 1-8., 1900 (012002). ISSN 1742-6588 (Published)
Aina Najwa, Nadzri and Mohd Jamil Mohamed, Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke treatment: A computational study. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Aina Najwa, Nadzri and Payne, Stephen J. and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke: a conceptual modelling study. In: 7th IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2020) , 1 - 3 Mar. 2021 , Langkawi (Online). pp. 1-6.. ISBN 978-1-7281-4246-3 (Published)
Ainoon, Shabirin (2021) Potentials of non-ionic semi-rigid polymer assisted by cationic. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Ainul Farhani, Ahmad Nizam (2021) Inhibition of free fatty acid formation in oil palm fruit by using buffer solution. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Sabri, Mahmud).
Ainul Farhani, Ahmad Nizam and Mohd Sabri, Mahmud (2021) Food quality assurance of crude palm oil: a review on toxic ester feedstock. Oilseeds & fats Crops and Lipids (OCL), 28 (23). pp. 1-23. ISSN 2272-6977. (Published)
Aizzuddin, A. M. and Taib, M. Y. and Azmi, W. H. (2021) Investigation of pipe materials and thermal conductivity of soil on the performance of ground heat exchanger operating under Malaysia climate. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-11., 1078 (012030). ISSN 1757-899X (Published)
Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Design and simulation of solar roof-top projects for an energy self-reliant university campus. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012013). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Solar PV Microgrids Implementation model: A case study of Local Self Governments in the Indian State of Kerala. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-13., 1068 (012024). ISSN 1757-899X (Published)
Ajith, Gopi and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. (2021) Comparison of normal and weather corrected performance ratio of photovoltaic solar plants in hot and cold climates. Energy for Sustainable Development, 65. pp. 53-62. ISSN 0973-0826. (Published)
Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim and Noory, Valantena (2021) Iridoids of fenugreek (Trigonella-foenum-graecum L.) seed extract detected via LC-QTOF-MS analysis. Future Foods, 4 (100067). pp. 1-8. ISSN 2666-8335. (Published)
Akhtar, Shamim and Muhamad Zahim, Sujod and Hussain Rizvi, Syed Sajjad (2021) A Novel Deep Learning Architecture for Data-Driven Energy Efficiency Management (D2EEM) - Systematic Survey. In: 7th International Conference on Engineering and Emerging Technologies, ICEET 2021 , 27-28 October 2021 , Istanbul, Turkey. (176217). ISBN 9781665427142 (Published)
Akhtar, Shamim and Muhamad Zahim, Sujod and Rizvi, Syed Sajjad Hussain (2021) A Hybrid Soft Computing Framework for Electrical Energy Optimization. In: 2021 6th International Multi-Topic ICT Conference (IMTIC) , 10-12 Nov. 2021 , Jamshoro & Karachi, Pakistan. (177765). ISBN 9781665482943 (Published)
Al Jasmi, S. and Nur Farhayu, Ariffin and Seman, M. A. (2021) The research of blast resistant of reinforcement concrete beams in concrete structures at off-site oil and gas plant. Construction, 1 (2). pp. 85-92. ISSN 2785-8731. (Published)
Al-Aidaros, A. Z. and Masri, K. A. and Putra Jaya, Ramadhansyah and Yaacob, H. and Norhidayah, A. H. and Mohd Warid, M. N. (2021) Predication of nano-silica modified porous asphalt under dynamic creep by using finite element analysis. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012059). ISSN 1755-1315 (Published)
Al-Bawri, Samir Salem and Islam, Mohammad Tariqul and Jit Singh, Mandeep and Jamlos, M. F. and Narbudowicz, Adam and Ammann, Max J. and Schreurs, Dominique M. M. P. (2021) RSS-based indoor localization system with single base station. Computers, Materials & Continua, 70 (3). pp. 5437-5452. ISSN 1546-2226. (Published)
Al-Jbour, Nawzat D. and M. D. H., Beg and Jolius, Gimbun and A. K. M., Moshiul Alam (2021) Preparation and characterization of low molecular weight chitosan with different degrees of deacetylation by the acid hydrolysis method. International Journal of Applied Pharmaceutics, 13 (2). pp. 153-164. ISSN 0975-7058. (Published)
Al-Saffar, Ahmed and Suryanti, Awang and Al-Saiagh, Wafaa and Al-Khaleefa, Ahmed Salih and Abed, Saad Adnan (2021) A sequential handwriting recognition model based on a dynamically configurable CRNN. Sensors, 21 (21). pp. 1-25. ISSN 1424-8220. (Published)
Al-Saffar, Z. H. and Yaacob, H. and Mohd Satar, M. K. I. and Mohd Usak, S. N. and Putra Jaya, Ramadhansyah and Hassan, N. A. and Radeef, H. R. and Warid, M. N. M. (2021) Evaluating the performance of reclaimed asphalt pavement incorporating pelletRAP as a rejuvenator. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-11., 682 (012068). ISSN 1755-1315 (Published)
Al-Saffar, Zaid Hazim and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar and Putra Jaya, Ramadhansyah and Che Ros, Ismael and Azman, Mohamed and Rogo, Kabiru Usman (2021) Physical, rheological and chemical features of recycled asphalt embraced with a hybrid rejuvenating agent. International Journal of Pavement Engineering. pp. 1-21. ISSN 1477-268X. (Published)
Al-Saffar, Zaid Hazim and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar and Putra Jaya, Ramadhansyah and Norazah, Basa and Radeef, Hassanain Radhi and Norhidayah, Abdul Hassan (2021) Effects of maltene on the attributes of reclaimed asphalt pavement: Performance optimisation. Construction and Building Materials, 302 (124210). pp. 1-14. ISSN 0950-0618. (Published)
Al-Shakhrit, A. K. S. and Masri, K. A. and Othman, C. P. (2021) The social and economic impacts of e-hailing application in Malaysia: A review. Construction, 1 (2). pp. 40-44. ISSN 2785-8731. (Published)
Al-hokabi, Abdulmajeed and Muzamir, Hasan and Amran, Mugahed and Fediuk, Roman and Vatin, Nikolai Ivanovich and Klyuev, Sergey (2021) Improving the early properties of treated soft kaolin clay with palm oil fuel ash and gypsum. Sustainability, 13 (10910). pp. 1-18. ISSN 2071-1050. (Published)
Alara, Oluwaseun Ruth and Abdurahman, N.H. and Ali, H.A. and Zain, N.M. (2021) Microwave-assisted extraction of phenolic compounds from Carica papaya leaves: An optimization study and LC-QTOF-MS analysis. Future Foods, 3 (100035). pp. 1-8. ISSN 2666-8335. (Published)
Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael (2021) Extraction of phenolic compounds: A review. Current Research in Food Science, 4. pp. 200-214. ISSN 2665-9271. (Published)
Aletbaa, Salam Ridha Oleiwi and Norhidayah, Abdul Hassan and Putra Jaya, Ramadhansyah and Eeydzah, Aminudin and Mohd Zul Hanif, Mahmud and Azman, Mohamed and Ahmed Abdulameer, Hussein (2021) Thermal performance of cooling strategies for asphalt pavement: a state-of-the-art review. Journal of Traffic and Transportation Engineering (English Edition), 8 (2). 0-44. ISSN 2095-7564. (In Press / Online First) (In Press / Online First)
Ali, Alaa Mashjel and Rashid, Khalid T. and Yahya, Ali Amer and Majdi, Hasan Sh. and Salih, Issam K. and Kamal, Yusoh and Alsalhy, Qusay F. and AbdulRazak, Adnan A. and Figoli, Alberto (2021) Fabrication of gum arabic-graphene (GGA) modified polyphenylsulfone (PPSU) mixed matrix membranes: A systematic evaluation study for ultrafiltration (UF) applications. Membranes, 11 (7). pp. 1-18. ISSN 2077-0375. (Published)
Ali, Mohammed A. H. and Radzak, Muhammad S. A. and Mailah, Musa and Yusoff, Nukman and Abd Razak, Bushroa and Ab.Karim, Mohd Sayuti and Ameen, Wadea and Jabbar, Waheb A. and Alsewari, Abdulrahman A. and Rassem, Taha H. and Nasser, Abdullah B. and Abdulghafor, Rawad (2021) A novel inertia moment estimation algorithm collaborated with active force control scheme for wheeled mobile robot control in constrained environments. Expert Systems with Applications, 183 (115454). pp. 1-29. ISSN 0957-4174. (Published)
Ali Abdallah, Ali Emhemed (2021) Optimal distributed generation and load shedding scheme using artificial bee colony- hill climbing algorithm considering voltage stability and losses indices. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Ali Huddin, Ibrahim and Mohd Rosli, Mohd Hasan and Sani, Ashiru and Sharvin, Poovaneshvaran and Wong, Tracy Leh Xin and Megat Azmi, Megat Johari and Choong, Kok Keong and Putra Jaya, Ramadhansyah (2021) Physicomechanical assessments and heavy metals' leaching potential of modified asphalt binders incorporating crumb rubber and tin slag powders. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434. (Published)
Aliaa, Zanurin and Nor Azmi, Hj Johari and Juliawati, Alias and Mas Ayu, Hassan and Norizah, Hj Redzuan and Sudin, Izman (2021) Research progress of sol-gel ceramic coating : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1849-1854., 48 (176050). ISSN 2214-7853 (Published)
Aljaerani, Hatem Ahmad and M., Samykano and R., Saidur and A. K., Pandey and K., Kadirgama (2021) Nanoparticles as molten salts thermophysical properties enhancer for concentrated solar power: A critical review. Journal of Energy Storage, 44 (Part A). pp. 1-20. ISSN 2352-152X. (Published)
Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Amirul Shafiq, Khairuddin (2021) Modelling Of Power Converter Wpt System Based On Inductor Current Ripple. College of Engineering, Universiti Malaysia Pahang.
An, Xue and Che, Jialing and Liu, Haifeng and Yang, Shuyan and Doh, Shu Ing (2021) Study on freeze-thaw resistance with NaCl of desert sand engineering cement composites. Physics and Chemistry of the Earth, 121. pp. 1-8. ISSN 1474-7065. (Published)
Anusuiah, Vasu (2021) Investigation on cyclic degradation of thermophysical properties of paraffin wax as a phase change material and their impact on heat storage performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).
Anwar I., Ramadhan and Azmi, Wan H. and Rizalman, Mamat (2021) Stability and thermal conductivity of tri-hybrid nanofluids for high concentration in water-ethylene glycol (60:40). Nanoscience and Nanotechnology - Asia, 11 (4). pp. 1-11. ISSN 2210 - 6812. (Published)
Anwar Ilmar, Ramadhan and Azmi, W. H. and R., Mamat (2021) Experimental investigation of thermo-physical properties of tri-hybrid nanoparticles in water-ethylene glycol mixture. Walailak Journal of Science and Technology, 18 (8). pp. 1-15. ISSN 1686-3933. (Published)
Aravinda, Kottasamy and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and M. M., Rahman and A. K., Pandey (2021) Optimization of impact properties of Copper-Polylactic Acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 78-90. ISSN 2289 - 7879. (Published)
Arifin, Hanis Hazirah and Zardasti, Libriati and Lim, Kar Sing and Md. Noor, Norhazilan and Yahaya, Nordin and Mazlan, Ain Naadia and Mohd. Sam, Abdul Rahman (2021) Stress distribution analysis of composite repair with carbon nanotubes reinforced putty for damaged steel pipeline. International Journal of Pressure Vessels and Piping, 194, Part A (104537). pp. 1-12. ISSN 0308-0161. (Published)
Arvind, Kottasamy and Mahendran, Samykano and Kumaran, Kadirgama and Rahma, Mustafizur and Muhamad, Mat Noor (2021) Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique. Journal of Advanced Manufacturing Technology, 119. pp. 5211-5232. ISSN 2289-8107. (Published)
Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Mohamad Heerwan, Peeie and Ahmad Fakhri, Ab. Nasir and Muhammad Izhar, Ishak (2021) Estimation of electric vehicle turning radius through machine learning for roundabout cornering. In: 19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021 , 23-25 November 2021 , Kota Kinabalu, Sabah. 329 -332.. ISSN 2643-2447 ISBN 978-1-6654-0193-7 (Published)
Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X (Published)
At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Oumer, Ahmed Nurye (2021) Thermal conductivity and dynamic viscosity of mono and hybrid organic- and synthetic-based nanofluids: A critical review. Nanotechnology Reviews, 10 (1). pp. 1624-1661. ISSN 2191-9097. (Published)
Athirah, B. and Nurul Shahida, M. S. (2021) Aircraft noise exposure and effects on the health of nearby residents: a review. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 361-378.. ISSN 21954356 ISBN 978-981164114-5 (In Press / Online First) (In Press / Online First)
Athirah, Yusof and Nurul Shahida, M. S. (2021) Prevalence of Musculoskeletal Discomfort Among Workers in a Medical Manufacturing Facility. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8687-8694. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Atik, Faysal and Adhreena, M S N A and Vorathin, E. and Hafizi, Z. M. and Ngui, W K (2021) Leak diagnosis of pipeline based on empirical mode decomposition and support vector machine. IOP Conf. Series: Materials Science and Engineering, 1078 (1). pp. 1-9. ISSN 1757-899X (online); 1757-8981 (Print). (Published)
Atirah Fatini, Zin Azmi and Shalyda, Md Shaarani @ Md Nawi and Jun Haslinda, Shariffuddin and Nasratun, Masngut and Zatul Iffah, Mohd Arshad (2021) Pineapple enzyme: Beneficial poultry supplement. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Attili, Ramkiran and Vo, Dai-Viet N. and Mohd Sabri, Mahmud (2021) Syngas production from ethanol dry reforming using Cu-based perovskite catalysts promoted with rare earth metals. International Journal of Hydrogen Energy, 46 (48). pp. 24845-24854. ISSN 0360-3199. (Published)
Azad, Saiful and Amin Salem, Saleh Bllagdham and Mahmud, Mufti and Kaiser, M. Shamim and Miah, Md Saef Ullah (2021) A behavioral trust model for internet of healthcare things using an improved FP-growth algorithm and Naïve Bayes classifier. In: 2021 3rd International Conference on Sustainable Technologies for Industry 4.0, STI 2021. 3rd International Conference on Sustainable Technologies for Industry 4.0, STI 2021 , 18 - 19 December 2021 , Dhaka. pp. 1-6.. ISBN 978-166540009-1 (Published)
Azed, M. A. and Doh, Shu Ing (2021) Properties of concrete containing microwaved sewage sludge ash. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8469 -8479. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Azhani, Zukri (2021) Settlement analysis of treated soft clay using LECA replacement through numerical modelling. Construction, 1 (2). pp. 76-84. ISSN 2785-8731. (Published)
Azizul Qayyum, Basri (2021) Integrated single minute exchange of die (ismed) approach to improve tandem press line operation output in automotive industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Azizul Qayyum, Basri and N. M. Zuki, N. M. and Nelfiyanti, Nelfiyanti and Yusrizal, Yusoof (2021) SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 8895-8906. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Azlina, Ismail and Intan Suhana, Mohd Razelan and Lydia, Mohd Yusof and Adnan, Zulkiple and Khairil Azman, Masri (2021) An overview of pavement maintenance management strategies in Malaysia. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (012042). ISSN 1755-1307 (Published)
Badruddin, I. and Abdul Hassan, N. and Mahmud, M. Z. H. and Ismail, S. and Putra Jaya, Ramadhansyah and Oleiwi Aletba, S. R. and Mohd Rosli, Hainin (2021) Effect of environmental exposure on the cooling rate of asphalt mixtures. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012072). ISSN 1755-1315 (Published)
Bai, Sandhia and Amirruddin, Abdul Kadir and Pandey, A. K. and Samykano, M. and Muhammad Shakeel, Ahmad and Sharma, Kamal and Tyagi, V. V. (2021) Advancements in the development of various types of dye-sensitized solar cells: A comparative review. Energy Engineering, 118 (4). 737 -759. ISSN 0199-8595. (Published)
Beng, Wei Chong and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Xiaofeng, Li and Mohd Haziman, Wan Ibrahim and Mohd Mustafa Al Bakri, Abdullah and Sandu, Andrei Victor and Płoszaj, Bartosz and Szmidla, Janusz and Stachowiak, Tomasz (2021) Image Analysis of Surface Porosity Mortar Containing Processed Spent Bleaching Earth. Materials, 14 (7). pp. 1-16. ISSN 1996-1944. (Published)
Beng, Wei Chong and Rokiah, Othman and Putra Jaya, Ramadhansyah and Xiaofeng, Li and Mohd Rosli, Mohd Hasan and Mohd Mustafa Al Bakri, Abdullah (2021) Meta-analysis of studies on eggshell concrete using mixed regression and response surface methodology. Journal of King Saud University - Engineering Sciences. pp. 1-20. ISSN 1018-3639. (In Press / Online First) (In Press / Online First)
Benjunior, Bindamin (2021) Characterization of wrought aluminium feedstock billet produced by semisolid metal processing route. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Asnul Hadi).
Chang, Siaw Sang and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2021) Oil palm waste to green energy : Co-torrefied oil palm pellet (Co-TOPP). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Che Ku Eddy Nizwan, Che Ku Husin and Mohd Fairusham, Ghazali and Ahmad Razlan, Yusoff (2021) Spectral subtraction-based filter for experimental modal analysis under harmonics excitation force. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8480-8489. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Chong, B. W. and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng (2021) Mathematical modelling of concrete compressive strength with waste tire rubber as fine aggregate. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8344 -8355. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng and Noram Irwan, Ramli (2021) Properties of concrete with eggshell powder and tyre rubber crumb. Key Engineering Materials, 879. pp. 34-48. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Chong, Beng Wei and Rokiah, Othman and Tan, Wei Sheng and Putra Jaya, Ramadhansyah and Mohd Mustafa Al Bakri, Abdullah (2021) Properties of mortar with waste tyre rubber as partial sand replacement. Key Engineering Materials, 879. pp. 49-61. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Cionita, Tezara and Siregar, Januar Parlaungan and Mohammad Hazim, Mohamad Hamdan and Rihayat, Teuku and Bachtiar, Dandi and Fitriyana, Deni Fajar and Prayitno, P. (2021) Influence of layering sequences on tensile properties of hybrid woven Jute/Ramie fibre reinforced polyester composites. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1836-1841., 48. ISSN 2214-7853 (Published)
Cui Ming, Ng and Putra Jaya, Ramadhansyah and Haryati, Awang and Khairil Azman, Masri and Noram Irwan, Ramli (2021) Eggshell bitumen – Alternative binder for road construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Dar, Qamar Uz Zaman and Renhai, Pu and Sajid, Zulqarnain and Mehmood, Mubashir and Abdul, Wahab (2021) The provenance and tectonic settings of the greywacke member of the late neoproterozoic hazara formation lesser himalayas, northern pakistan: Evidence from geochemistry and petrography. Sains Malaysiana, 50 (12). pp. 3505-3522. ISSN 0126-6039. (Published)
Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Dash, Archita Rani and Lakhani, Aadit J. and Priya, Duraipandi Devi and Surendra, T. V. and Khan, Md. Maksudur Rahman and Samuel, E. James Jebaseelan and Roopan, Selvaraj Mohana (2021) Green synthesis of stannic oxide nanoparticles for ciprofloxacin degradation: optimization and modelling using a Response Surface Methodology (RSM) based on the box–behnken design. Journal of Cluster Science. pp. 1-13. ISSN 1572-8862. (Published)
Dayangku Noorfazidah, Awang Sh'ri and Zahiruddeen Salam, Zahari and Yamamoto, Akiko (2021) Effect of ECAP die angle on mechanical properties and biocompatibility of SS316L. Metals, 11 (10). pp. 1-10. ISSN 2075-4701. (Published)
Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Diyana, Kamarudin and Elmokri, Razman and Yasmin, Hussain and Hu, Xiaojie and Rahman, Md Mustafizur (2021) Hear me : Assistive technology for the deaf and hearing impaired. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Edriyana, Abd Aziz and S. N., Moni and Noraini, Yussof (2021) Blue Water Footrpint- Industrial Water Consumption Nexus: A Case of Water Supply for Industrial Activities in Semambu Water Treatment Plant. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-10., 1092 (012045). ISSN 1757-899X (Published)
Ekarizan, Shaffie and H. A., Rashid and Shiong, Fiona and Ahmad Kamil, Arshad and Juraidah, Ahmad and Wardati, Hashim and Putra Jaya, Ramadhansyah and K. A., Masri (2021) Performance characterization of stone mastic asphalt using steel fiber. Journal of Advanced Industrial Technology and Application, 2 (2). pp. 22-33. ISSN 2716-7097. (Published)
Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijaya Kumar, Shamala (2021) Application of full factorial design to screen the factors influencing the wax deposition of Malaysian crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1829-1839. ISSN 2190-0558. (Published)
Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijayakumar, Shamala (2021) Synthesis, characterization and evaluation of stearyl acrylate-co-behenyl acrylate copolymer as a pour point depressant of waxy crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1811-1828. ISSN 2190-0558. (Published)
Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Norhayati, Abdullah and Kamal, Yusoh (2021) Influence of poly (stearyl acrylate co-behenyl acrylate) as flow improvers on the viscosity reduction of Malaysian crude oil. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 201-210., 42 (1). ISSN 2214-7853 (Published)
Elkbuli, Mohamed O. and Adnan, Zulkiple (2021) The influence of managerial communication skills on project risk management practices in the Libyan oil and gas industry. In: Proceedings of The 3rd International Conference on Economics, Entrepreneurship and Management 2021 (ICEEM 2021). The 3rd International Conference On Economics, Entrepreneurship And Management 2021 (ICEEM2021) , 28 February 2021 , Virtual. pp. 1-20.. ISBN 9789671731321 (Published)
Endot, N. A. and Junid, R. and Jamil, M. S. S. (2021) Insight into biomass upgrade: A review on hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF). Molecules, 26 (22). pp. 1-20. ISSN 1420-3049. (Published)
Erdiwansyah, . and Mahidin, . and Husni, Husin and Nasaruddin, . and Muhtadin, . and Muhammad, Faisal and Asri, Gani and Usman, . and R., Mamat (2021) Combustion efficiency in a fluidized-bed combustor with a modified perforated plate for air distribution. Processes, 9 (9). pp. 1-12. ISSN 2227-9717. (Published)
Erna Bistari, Ahmad Tamizi and Mohd Anwar, Zawawi and Roszitaida, Adzemin (2021) Wearable optical sensor for low back pain monitoring. In: Proceedings of the International Conference on Electrical Engineering and Informatics. 8th International Conference on Electrical Engineering and Informatics, ICEEI 2021 , 12 - 13 October 2021 , Kuala Terengganu. pp. 1-7.. ISSN 2155-6830 (Published)
Esmail Abdullah, Mohammed Basheer (2021) Development of hybrid microfluidics chip for water desalination and purification. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Fahmi, Samsuri and Ezhilnavaroji, Jeroish Zachariah and Narayanamurthy, Vigneswaran and Shanmugavel, Bhuvaneshwari Kumaravel (2021) Hepatitis C virus diagnosis using microfluidics technique. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Farah Hafidzah, Ahmad and Nurhamizah, Ibrahim and Mohd Sabri, Mahmud and Ali, Waleed and Mohd Bijarimi, Mat Piah and Suriyati, Saleh and Said, Nurdin (2021) Microwave irradiation optimization for efficient lignin removal from cocoa shell waste using alkali. IIUM Engineering Journal, 22 (2). 21 -30. ISSN 1511-788X. (Published)
Farah Nur Arina, Baharudin and Nor Azlina, Ab. Aziz and Mohamad Razwan, Abdul Malek and Zuwairie, Ibrahim (2021) Optimization of user comfort index for ambient intelligence using dynamic inertia weight artificial bees colony optimization algorithm. In: Lecture Notes in Mechanical Engineering; 8th International Conference on Robot Intelligence Technology and Applications, RiTA 2020 , 11-13 December 2020 , Virtual, Online. pp. 351-363.. ISSN 2195-4356 ISBN 978-981-16-4803-8 (Published)
Faten, Ahmad Al-Btoush (2021) Effective strategies dealing with construction cost overruns: a study in Jordan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Fathie, Ahmad Zakil and Khai Qi, Low and Norfaznila, Mohammad and Nur Adila Aida, Salahutheen and Khaled Nasser, Aldafri (2021) Waste to wealth : Low cost fruiting body substrate for pleurotus ostreatus cultivation using various agro-industrial wastes in Malaysia: application of natural calcium source. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Fathie, Ahmad Zakil and Lim, Hui Xuan and Norafira, Zaman and Nurul Idayu, Alan and Nurul Adila Aida, Salahutheen and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha (2021) Growth performance and mineral analysis of Pleurotus ostreatus from various agricultural wastes mixed with rubber tree sawdust in Malaysia. Bioresource Technology Reports, 17 (100873). pp. 1-8. ISSN 2589-014X. (Published)
Fathie, Ahmad Zakila and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha and Siti Hajar, Kamaluddin (2021) Efficiency of charcoal as supporting growth material in Pleurotus Ostreatus Mushroom Cultivation on various agricultural wastes mixed with rubber tree sawdust (SR) (in-Press). Chemical Engineering Transactions, 89. pp. 415-420. ISSN 2283-9216. (In Press / Online First) (In Press / Online First)
Faysal, Atik and Ngui, Wai Keng and Lim, Meng Hee and Leong, Mohd Salman (2021) Noise Eliminated Ensemble Empirical Mode Decomposition Scalogram Analysis for Rotating Machinery Fault Diagnosis. Sensors, 21 (23). pp. 1-29. ISSN 1424-8220. (Published)
Fazilah, Abdul Aziz (2021) Analytic hierarchy process and knowledge-based system integration for web-based ergonomics assessment approach in prioritizing workplace critical risk factors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nik Mohamed, Nik Mohd Zuki).
Fazliana, Fauzun (2021) Laser cladding of tool steel for grain boundary stability. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).
Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and S., Mohd Nadzir (2021) Numerical prediction of creep rupture life of ex-service and as-received grade 91 steel at 873 K. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8845 -8858. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Chin, S. Y. (2021) Effect of residence time on the morphology of silica nanoparticles synthesized in a microfluidic reactor. Journal of Flow Chemistry. pp. 1-14. ISSN 2063-0212. (Published)
Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Chin, S. Y. (2021) Investigating the effect of nonionic surfactant on the silica nanoparticles formation and morphology in a microfluidic reactor. Journal of Flow Chemistry, 11. pp. 737-750. ISSN 2063-0212. (Published)
Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Chin, Sim Yee (2021) Microfluidic Chips for Formulation of Silica Nanoparticles and Enzyme Immobilization. Chemical Engineering and Technology, 44 (8). pp. 1423-1431. ISSN 1521-4125. (Published)
Firdaus, Basrawi and Chandran, Puganesa (2021) PV cools: Close loop water cooling system for PV module. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Foo, K. and Liang, Y. Y. and Tan, C. K. and Weihs, G. A. Fimbres (2021) Coupled effects of circular and elliptical feed spacers under forced-slip on viscous dissipation and mass transfer enhancement based on CFD. Journal of Membrane Science, 637 (119599). pp. 1-13. ISSN 0376-7388. (Published)
G., Danoshini and A., Baqadeem and A. K. S., Al-Shakhrit and N. E., Jasni and Khairil Azman, Masri (2021) Statistical Analysis of Stone Mastic Asphalt Incorporating Kenaf Fibre. Construction, 1 (1). pp. 12-17. ISSN 2785-8731. (Published)
G., Sashwin Nair and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan (2021) Flow and heat transfer simulation analysis of 3D compact heat exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (3). pp. 71-87. ISSN 2289-7879. (Published)
G. K., Chua and F. H. Y., Tan and F. N., Chew and A. R., Mohd Hairul and M. A. A., Ahmad (2021) Food waste hydrolysate as fermentation medium: Comparison of pre-treatment methods. In: Materials Today: Proceedings, International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 131-137., 42 (Part 1). ISSN 2214-7853 (Published)
G. L., Lew and N., Ibrahim and S., Abdullah and W. R., Wan Daud and W. K. W., Ramli (2021) Exsolution enhancement of metal-support co oxidation perovskite catalyst with parameter modification. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-8., 765 (012078). ISSN 1755-1307 (Published)
Goh, Ming Qian (2021) Adaptive fuzzy proportional-integral-derivative control for micro aerial vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Owl, Pebrianti).
Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)
Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)
H. A., Roslan and M. I., Adiyanto and N. S. H., Harith and Faisal, Ade and S. M.S. A., Razak (2021) Impact of seismic design on cost of structural materials for two storey hostel building in Sabah. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012024). ISSN 1755-1307 (Published)
Hadi, A. E. and Tezara, C. and Fitriyana, D. F. and Siregar, J. P. and Oumer, A. N. and Hamdan, M. H. M. and Jaafar, J. and Zalinawati, M. and Irawan, A. P. (2021) Effect of water absorption behaviour on tensile properties of hybrid jute-roselle woven fibre reinforced polyester composites. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9170-9178. ISSN 2180-1606. (Published)
Hadi, Agung Efriyo and Mohamad Hamdan, Mohammad Hazim and Siregar, J. P. and Ramli, Junid and Tezara, Cionita and Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Rihayat, Teuku (2021) Application of micromechanical modelling for the evaluation of elastic moduli of hybrid woven jute–ramie reinforced unsaturated polyester composites. Polymers, 13 (15). pp. 1-11. ISSN 2073-4360. (Published)
Hamid Nour, Abdurahman and Akbari, Sweeta and Rosli, Mohd Yunus and Mona, Timan (2021) Potential of fenugreek seed extract for health, the environment and the economy. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Hamid Nour, Abdurahman and Radhwa, Muhammad Farid (2021) The potentials of an integrated ultrasonic membrane anaerobic system, iumas for pome treatment. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Hamisa, A. H. and Azmi, W. H. and Mohd Yusof, Taib and Sharif, M. Z. and Dahlan, A. A. (2021) Development of automotive air-conditioning system test rig for hybrid electric vehicles. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-11., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Hamood, M and Oumer, A. N. and Azizuddin, Abd Aziz and M., Ishak and Siregar, J. P. and Mamat, O (2021) Heat transfer analysis in compact heat exchanger with fibre reinforced plate. In: IOP Conference Series: Materials Science and Engineering, Volume 1078, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , Pekan, Malaysia , 19-20 January 2021. pp. 1-9., 1078. ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
Hamzah, Ahmad (2021) Transformasi Digital dalam PdP beri manfaat buat masyarakat. UMP News .
Hamzah, Ahmad and Lim Zhi, Xian and Nur Aqilah, Othman and Mohd Syakirin, Ramli and Mohd Mawardi, Saari (2021) An analysis of state covariance of mobile robot navigation in unstructured environment based on ROS. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. pp. 259-270., 666. ISBN 1876-1100 (Published)
Harraz Irfan, Nazaruddin and Mohd Razali, Daud (2021) Current collector-free independent battery railway vehicle. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Haryati, Awang and A F, Salmanfarsi and A, Arizam and Mohamad Idris, Ali (2021) Engineering characterisation of weathered rock at Sri Jaya, Pahang, Malaysia. IOP Conference Series: Earth and Environmental Science, 682. 012-016. ISSN 1755-1315. (Published)
Haryati, Awang and A F, Salmanfarsi and A Z, Misbahuddin and Mohamad Idris, Ali (2021) Slope stability analysis of rock mass using Rock Mass Rating and Slope Mass Rating. In: 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16-17 October 2020 , Putrajaya, Virtual. pp. 1-6., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Haryati, Awang and A F, Salmanfarsi and M S I, Zaini and M A F, Mohamad Yazid and Mohd Idris, Ali (2021) Investigation of groundwater table under rock slope by using electrical resistivity imaging at Sri Jaya, Pahang, Malaysia. IOP Conference Series: Earth and Environmental Science, 682. 012-017. ISSN 1755-1315. (Published)
Haryati, Awang and Ahmad Faiz, Salmanfarsi and M S, Aminudin and Mohamad Idris, Ali (2021) Stability of weathered cut slope by using kinematic analysis. In: IOP Conference Series: Earth and Environmental Science. 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16-17 October 2020 , Putrajaya, Virtual. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)
Hasan, M. M. and Rahman, Md Mustafizur and Rasul, M. G. (2021) The thermal and auto-ignition performance of a homogeneous charge compression ignition engine fuelled with diethyl ether and ethanol blends. Applied Thermal Engineering, 190 (116828). pp. 1-11. ISSN 1359-4311. (Published)
Hasan, Md Munirul and Islam, M. S. and S., A. Bakar and M. M., Rahman and Kabir, M. N. (2021) Applications of artificial neural networks in engine cooling system. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 471 -476.. (Published)
Hashim, N. A. and Abdul Mudalip, S. K. and Sulaiman, S. Z. and Md Shaarani, Shalyda (2021) Nutritional values and microencapsulation techniques of fish oil from different sources: A mini review. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 222-228., 42 (1). ISSN 2214-7853 (Published)
Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail (2021) Nanocellulose‑based materials and recent application for heavy metal removal. Water, Air, & Soil Pollution An International Journal of Environmental Pollution, 305. pp. 1-16. ISSN 1573-2932. (Published)
Hazman, Abu Hassan and Hagos, F. Y. and Kadarohman, Asep and Sardjono, R. E. and Khoerunnisa, Fitri and Bo, Zhang and Jiang, X. X. (2021) Engine emissions analysis of emulsified fuel of different blend ratios. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-10., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Heshalini, Rajagopal and Norrima, Mokhtar and Anis Salwa, Mohd Khairuddin and Wan Khairunizam, Wan Ahmad and Zuwairie, Ibrahim and Asrul, Adam and Wan Amirul, Wan Mohd Mahiyidin (2021) Gray Level Co-Occurrence Matrix (GLCM) and Gabor Features Based No-Reference Image Quality Assessment for Wood Images. In: Proceeding of the 2021 International Conference on Artificial Life and Robotics (ICAROB2021) , 21 - 24 January 2021 . pp. 736-741.. ISBN 978-4-9908350-6-4 (Published)
Heshalini, Rajagopal and Norrima, Mokhtar and Anis Salwa, Mohd Khairuddin and Wan Khairunizam, Wan Ahmad and Zuwairie, Ibrahim and Asrul, Adam and Wan Amirul, Wan Mohd Mahiyidin (2021) A no-reference image quality assessment metric for wood images. Journal of Robotics, Networking and Artificial Life, 8 (2). pp. 127-133. ISSN 2405-9021. (Published)
Ho, C. M. and Tan, Q. N. and Doh, S. I. and Omar, J. and Mohammed Al-Btoush, K. A. (2021) A study on the acceptance level of rack housing in Malaysia. Construction, 1 (2). pp. 1-8. ISSN 2785-8731. (Published)
Hong, Lim Seh and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan and Azian, Abd Aziz (2021) Reconstruction of patient-specific cerebral aneurysm model through image segmentation. In: The 3 rd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2020 , 28 October 2020 , Virtual/Online Conference (Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis). pp. 207-214.. ISBN 9789811608667 (Published)
Hussain, I. and A. A., Jalil and S. M., Izan and M. S., Azami and K., Kidam and Nurul Aini, Razali and A., Ripin (2021) Thermodynamic and experimental explorations of CO2 methanation over highly active metal-free fibrous silica-beta zeolite (FS@SiO2-BEA) of innovative morphology. Chemical Engineering Science, 229 (116015). pp. 1-14. ISSN 0009-2509. (Published)
Hybat Salih, Mohamed Abdlrhman (2021) Characterization and optimization of the performance of an integrated ultrasonic membrane anaerobic (IUMAS) in treating pome as substrate. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).
I, Samylingam and Aslfattahi, Navid and K., Kadirgama and Mahendran, Samykano and L., Samylingam and R., Saidur (2021) Improved Thermophysical Properties of Developed Ternary Nitrate-Based Phase Change Material Incorporated with MXene as Novel Nanocomposites. Energy Engineering, 118 (5). pp. 1253-1265. ISSN 0199-8595. (Published)
I., Samylingam and K., Kadirgama and Aslfattahi, Navid and L., Samylingam and D., Ramasamy and W. S., Wan Harun and M., Samykano and R., Saidur (2021) Review on thermal energy storage and eutectic nitrate salt melting point. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-21., 1078 (012034). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Ibrahim, Ali Huddin and Mohd Rosli, Mohd Hasan and Sani, Ashiru and Sharvin, Poovaneshvaran and Wong, Tracy Leh Xin and Megat Azmi, Megat Johari and Choong, Kok Keong and Putra Jaya, Ramadhansyah (2021) Physicomechanical assessments and heavy metals’ leaching potential of modified asphalt binders incorporating crumb rubber and tin slag powders. Advances in Materials Science and Engineering, 2021 (2137957). pp. 1-10. ISSN 1687-8442. (Published)
Ida Hamidah, . and Agus, Solehudin and Aam, Hamdani and Lilik, Hasanah and Khairurrijal, Khairurrijal and Tedi, Kurniawan and R., Mamat and Rina, Maryanti and Asep Bayu Dani, Nandiyanto and Hammouti, Belkheir (2021) Corrosion of copper alloys in KOH, NaOH, NaCl, and HCl electrolyte solutions and its impact to the mechanical properties. Alexandria Engineering Journal, 60 (2). pp. 2235-2243. ISSN 1110-0168. (Published)
Imtiaz, Ali Laghari and Reji Kumar, Rajamony and Pandey, A. K. and Mahendran, Samykano and Chopra, Kapil and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Energy, exergy, exergoeconomic and enviroeconomic (4-E) assessment of solar water heater with/without phase change material for building and other applications: a comprehensive review. Sustainable Energy Technologies and Assessments, 45. pp. 1-21. ISSN 2213-1388. (Published)
Indah Thuraya, Herman and Faridah, Mukhrofun and Khairuddin, Md Isa and Naimah, Ibrahim and Mohd Aizudin, Abd Aziz (2021) Methanolysis of Ceiba Petandra (Kapok) seed for high yield fatty acid methyl ester (FAME): A parametric study. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-10., 765 (012075). ISSN 1755-1307 (Published)
Indah Thuraya, Herman and Khairuddin, Md Isa and Naimah, Ibrahim and Farizul Hafizb, Kasim and Mohd Aizudin, Abd Aziz (2021) A single step transesterification process to produce biodiesel from the spent cooking oil. In: IOP Conference Series: Earth and Environmental Science, 1st International Conference on Biomass Utilization and Sustainable Energy 2020 , 15-16 December 2020 , Virtual Conference, Universiti Malaysia Perlis (UniMAP). pp. 1-8., 765 (012077). ISSN 1755-1307 (Published)
Intan Najiha Akhmar, Saharuddin and Doh, Shu Ing (2021) A study of soil characteristics of road damages in Jeram, Kuala Selangor. IOP Conf. Series: Materials Science and Engineering, 1062 (012009). pp. 1-7. (Published)
Ismail, Zulhelmi and W. Idris, Wan Farhana and Abdullah, Abu Hannifa (2021) From shear exfoliation of graphite in Coca-Cola® to few-layer graphene for smart ink. Ceramics International, 47 (16). pp. 23309-23317. ISSN 0272-8842. (Published)
J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X (Published)
Jacob, Jeeja and Pandey, Adarsh Kumar and Rahim, Nasrudin Abd and Selvaraj, Jeyraj and Mahendran, Samykano and Tyagi, Vineet Veer and Saidur, Rahman (2021) Investigation on thermophysical properties of metallic oxide nanoparticle dispersed in fatty acid. In: Materials Today: Proceedings; 3rd International Conference on Advances in Mechanical Engineering and Nanotechnology, ICAMEN 2021 , 18-19 March 2021 , Jaipur. pp. 2864-2868., 47 (11). ISSN 2214-7853 (Published)
Jaliliantabar, Farzad and Rizalman, Mamat and Sudhakar, Kumarasamy (2021) Prediction of lithium-ion battery temperature in different operating conditions equipped with passive battery thermal management system by artificial neural networks. Materials Today: Proceedings, 48 (6). pp. 1796-1804. ISSN 2214-7853. (Published)
Jamlos, M. A. and Jamlos, M. F. and Azri, A. and Mohamad Shaiful, Abdul Karim and Wan Azani, Mustafa and Akkaraekthalin, Prayoot (2021) Properties and performance verification on magnetite polydimethylsiloxane graphene array microwave sensor. Polymers, 13 (19). pp. 1-12. ISSN 2073-4360. (Published)
Jarrah, H. T. and Mohtasebi, S. S and Ettefaghi, E. and Jaliliantabar, F. (2021) Experimental investigation of silver / water nanofluid heat transfer in car radiator. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). pp. 7743-7753. ISSN 2231-8380 (online). (Published)
Jarrud, Mohammed Muftah and Lim, Kar Sing and Mohd Syahrul Hisyam, Mohd Sani (2021) An overview of numerical studies on flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. International Journal of Emerging Trends in Engineering Research, 9 (2). pp. 15-24. ISSN 2347-3983. (Published)
Jie, Lim WeI and Sen, Teoh Poh and Normaniha, Abd Ghani (2021) Automatic control of color sorting and pick/place of a 6- dof robot arm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Jing, Xin and Cui, ZiZhi and Doh, Shu Ing and Ma, Li and Wei, Lu (2021) Effect of freeze-thaw cycles on shear strength of unsaturated bentonite modified clay. Physics and Chemistry of the Earth, 121. pp. 1-10. ISSN 1474-7065. (Published)
Juliawati, Alias and Fatin Ayuni, Ramlan and Nurul Amiratul, Johari and Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Nasrul Azuan, Alang (2021) “Aloe-heal coat” smart self-healing coating for anti-corrosion of automotive components. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Jun Haslinda, Shariffuddin and Mohd Faizal, Ali and Nayeem, Abdullah (2021) Polysulfide: Sorbent made from waste cooking palm oil for petroleum refinery wastewater. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
K., Kadirgama and L., Samylingam and Aslfattahi, Navid and M., Samykano and D., Ramasamy and R., Saidur (2021) Experimental Investigation on the Optical and Stability of Aqueous Ethylene Glycol/Mxene as a Promising Nanofluid for Solar Energy Harvesting. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-10., 1062 (012022). ISSN 1757-8981 (Print); 1757-899X (Online) (Published)
K., Peddakapu and M. R., Mohamed and P., Srinivasarao and A. S., Veerendra and D. J., K. Kishore and P. K., Leung (2021) Review on automatic generation control strategies for stabilising the frequency deviations in multiarea power system. International Journal of Ambient Energy, 1969272. pp. 1-25. ISSN 0143-0750 (Print); 2162-8246 (Online). (Published)
K., Peddakapu and M. R., Mohamed and P., Srinivasarao and P.K, Leung (2021) Frequency stabilization in interconnected power system using bat and harmony search algorithm with coordinated controllers. Applied Soft Computing, 113 (107986). pp. 1-18. ISSN 1568-4946 (print); 1872-9681 (online). (Published)
Kabiru Rogo, Usman and Mohd Rosli, Hainin and Mohd Khairul Idham, Mohd Satar and Muhammad Naqiuddin, Mohd Warid and Aliyu, Usman and Al-Saffar, Zaid Hazim and Bilema, Munder Abdullah (2021) A comparative assessment of the physical and microstructural properties of waste garnet generated from automated and manual blasting process. Case Studies in Construction Materials, 14 (e00474). pp. 1-17. ISSN 2214-5095. (Published)
Kadirgama, Kumaran and Chelian, Ilen and Rahman, Md Mustafizur and Devarajan, Ramasamy and Mahendran, Samykano and Samylingam, Lingenthiran and Rahman, Saidur (2021) Mxene enrich concentration solar power (CSP) coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Kananathan, J. and Mahendran, Samykano and K., Kadirgama and Ramasamy, D. and Rahman, M. M (2021) Statistical model for impact and energy absorption of 3D printed coconut Wood-PLA. Energy Engineering, 118 (5). pp. 1305-1315. ISSN 0199-8595. (Published)
Khairil Azman, Masri and Mazlan, Abu Seman and Ramadhansyah, Putra Jaya and Syafiqah Shamimi, Mohd Zali (2021) Nanotitan. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Khairil Azman, Masri and Muzamir, Hasan and Putra Jaya, Ramadhansyah and Mazlan, Abu Seman and Abdul Rahimi, Abdul Rahman (2021) A Modified Asphalt Binder Composition and Method of Preparing Thereof. [Intellectual Property (IP)]
Khairil Azman, Masri and Rashida Ferdaus, Rashida and Nur Ezreen, Jasni and Md Shahnewaz, Shoaib and Hasan, Kamrul (2021) GreenPave. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Khairunisa, Muthusamy and Rahimah, Embong and Nabilla, Mohamad and Nur Syahira Hanim, Kamarul Bahrin and Fadzil, Mat Yahaya (2021) Setting time and compressive strength of mortar containing cockle shell powder as partial cement replacement. Key Engineering Materials, 879. pp. 62-67. ISSN 1662-9795. (Published)
Khalaf, Ahmed Lateef and Hasan, Taif Sami and Abdulbari, Hayder A. and Kadhim, Wafaa A. and Mohd Hanif, Yaacob (2021) CNT-based tapered optical fiber for ethanol remote sensing over 3-km optical fiber. Journal of Materials Research and Technology, 12. 1738 -1746. ISSN 22387854. (Published)
Khalid, Adam and Izzeldin, I. Mohd and Ibrahim, Younis (2021) Analyzing the instructions vulnerability of dense convolutional network on GPUS. International Journal of Electrical and Computer Engineering (IJECE), 11 (5). pp. 4481-4488. ISSN 2088-8708 (Print); 2722-2578 (Online). (Published)
Khalid, Saifuddin and Zakaria, Irnie and W. H., Azmi and Mohamed, W. A. N. W. (2021) Thermal–electrical–hydraulic properties of Al2O3–SiO2 hybrid nanofluids for advanced PEM fuel cell thermal management. Journal of Thermal Analysis and Calorimetry, 143 (2). pp. 1555-1567. ISSN 1388-6150 (print); 1588-2926 (online). (Published)
Khalid Adam, Ismail Hammad (2021) Development of low-overhead soft error mitigation technique for safety critical neural networks applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Khalid Adam, Ismail Hammad and Izzeldin, I. Mohd and Ibrahim, Younis (2021) Analyzing the resilience of convolutional neural networks implemented on GPUs: Alexnet as a case study. International Journal of Electrical and Computer Engineering Systems, 12 (2). pp. 91-103. ISSN 1847-6996. (Published)
Khan, Maksudur Rahman and Thurga Devi, Munusamy and Chin, Sim Yee (2021) Green hydrogen generation from petrochemical wastewater. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Kharuddin, F. S. and Wan Azahar, W. N. A. W. and Putra Jaya, Ramadhansyah and Mohd Rosli, Hainin and Mohamed Jaafar, Z. F. (2021) Performance of asphaltic concrete modified with recycled crushed bricks. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (012061). ISSN 1755-1315 (Published)
Khawaja, Abdul Waheed and Nor Azwan, Mohamed Kamari and Ismail, Musirin and Mohd Asyraf, Zulkifley and Muhamad Zahim, Sujod (2021) Design of optimal multi-objective-based facts component with proportional-integral-derivative controller using swarm optimization approach. International Journal of Advanced Technology and Engineering Exploration, 8 (75). 391 -404. ISSN 2394-5443. (Published)
Khor, Ai Chia (2021) Characterization of negative electrolyte– alizarin red s and positive electrode felt for organic redox flow battery application. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamed, Mohd Rusllim).
Kirushna Moorthi, Jeevithan and Duraisamy, Youventharan and Rokiah, Othman and Mohd Arif, Sulaiman (2021) Innovative ballast replacement material (IBRM) in-line with geo-technology pillar of IR4.0 in construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Jewaliddin, S. K. and Peddakapu, K. and Srinivasarao, P. (2021) Ultra-short-term PV power forecasting based on a support vector machine with improved dragonfly algorithm. In: 1st IEEE International Conference on Emerging Trends in Industry 4.0, ETI 4.0 2021 , 19 - 21 May 2021 , Raigarh, India. pp. 1-5. (175124). ISBN 978-166542237-6 (Published)
Kong, Chung Hwa (2021) Investigation of inclusion casting, sand blasting and embossing methods to prepare engine cylinder bore surface for frictional and wear improvement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Kong, Nurziana and Khalil, Nur Zalikha and Fricke, Holger (2021) Moisture absorption behavior and adhesion properties of GNP/epoxy nanocomposite adhesives. Polymers, 13 (11). pp. 1-17. ISSN 2073-4360. (Published)
Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)
Kumar, Nallapaneni Manoj and Mahendran, Samykano and Karthick, A. (2021) Energy loss analysis of a large scale BIPV system for university buildings in tropical weather conditions: a partial and cumulative performance ratio approach. Case Studies in Thermal Engineering, 25 (100916). pp. 1-14. ISSN 2214-157X. (Published)
Kurukuri, Peddakapu (2021) Frequency deviations stabilizations in restructured power systems using coordinative controllers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).
L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X (Published)
Li, Xiaofeng and Doh, Shu Ing and Jing, Guo Qing and Chong, Beng Wei and Suil, Adilen Lucia and Chin, Siew Choo (2021) A comparative review on American, European and Chinese standard for railway concrete sleeper. Physics and Chemistry of the Earth, Parts A/B/C, 124 (Part 2). pp. 1-6. ISSN 1474-7065. (Published)
Liew Siaw Ing, Nicole and Putra Jaya, Ramadhansyah and Khairil Azman, Masri and Noram Irwan, Ramli and Mohamad Idris, Ali (2021) Seashell porous asphalt – Sustainable road construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Lim, Sheh Hong (2021) Computational study of hemodynamics analysis between mri measurement and cfd simulation on segmented patient-specific cerebral aneurysm model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Adib, Mohd Azrul Hisham).
Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan and Azian, Abd Aziz (2021) Investigation into Physical and Pathophysiological Changes of Hemodynamics on Segmented Patient-Specific Cerebral Aneurysm Models through Computational Analysis. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 136-141.. ISBN 978-1-7281-4245-6 (Published)
Lim, Wei Jie and Teoh, Poh Sen and Normaniha, Abd Ghani and M. F., Abas (2021) Automatic control of color sorting and pick/place of a 6- DOF robot arm. Journal Europeen des Systemes Automatises, 54 (3). 435 -443. ISSN 1269-6935. (Published)
M., Kaviya and P., Ramakrishnan and S. B., Mohamed and R., Ramakrishnan and J., Gimbun and K. M., Veerabadran and M. R., Kuppusamy and K., Kaviyarasu and T. M., Sridhar (2021) Synthesis and characterization of nano-hydroxyapatite/graphene oxide composite materials for medical implant coating applications. In: Materials Today: Proceedings, NANOSMATAFRICA-2018 , 19-23 November 2018 , CapeTown, South Africa. pp. 204-207., 36 (Part 2). ISSN 2214-7853 (Published)
M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)
M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X (Published)
M. A., Amzar Kamarudin and S. W., Ahmad and W. A. R., Wan Ariffin (2021) The behaviour of high-rise building with or without shear wall under different earthquakes. Construction, 1 (2). 93 -101. ISSN 2785-8731. (Published)
M. A., Saad and Nour, A. H. and R. M., Yunus (2021) Demulsification of a water-in-crude oil emulsion with a corn oil based-demulsifier using the response surface methodology: modelling and optimization. Recent Innovations in Chemical Engineering (Formerly: Recent Patents on Chemical Engineering), 14 (2). 148 -163. ISSN 2405-5212. (Published)
M. A. F., Romzi and Juliawati, Alias and M. I. M., Ramli (2021) Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-12., 1068 (012004). ISSN 1757-899X (Published)
M. F., Hassan and Nor Syukriah, Khalid (2021) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer. International Journal of Integrated Engineering, 13 (7). pp. 235-244. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)
M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. H. M., Hamdan and Siregar, J. P. and Tezara, C. and Rusiyanto, R. and Oumer, A. N. and J., Jaafar and M., Zalinawati (2021) Effect of fabric orientations on mechanical properties of hybrid jute-ramie reinforced unsaturated polyester composites. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-13., 700 (1). ISSN 1755-1307 (Published)
M. I. M., Ramli and M. A. F., Romzi and Juliawati, Alias (2021) Effect of surface condition on the corrosion behaviour of AZ31 magnesium alloy. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)
M. N., Mohd Foudzi and Mohd Yusof, Taib and A. S., Arnizam Shah and A. R., Yusoff (2021) Monitoring energy audit for energy savings using non cost technique at electronics company. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 71-79. ISSN 2636-9575. (Published)
Ma, XiaoTong and Bao, Chao and Doh, Shu Ing and Liu, HaiFeng and Zhang, L. X. and Ma, Z. W. and He, Y. (2021) Dynamic response analysis of story-adding structure with isolation technique subjected to near-fault pulse-like ground motions. Physics and Chemistry of the Earth, Parts A/B/C, 121. pp. 1-8. (Published)
Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X (Published)
Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)
Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7 (Published)
Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)
Mahmood, Wafaa K. and Hussien, Samar S. and Kadhim, Wafaa A. and Abdulbari, Hayder A. (2021) Oil-soluble organic polymer driven from aloe vera as drag reducing agent for crude oil flow in pipelines. International Journal of Oil, Gas and Coal Technology (IJOGCT), 27 (2). pp. 127-142. ISSN 1753-3317. (Published)
Maoqi, Li and M. I., Ishak and P. M., Heerwan (2021) Investigation on linear and nonlinear dynamic equation for vehicle model in numerical simulation. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012010). ISSN 1757-899X (Published)
Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Chalermwisutkul, Suramate and Akkaraekthalin, Prayoot (2021) Ganoderma boninense disease detection by near-infrared spectroscopy classification: a review. Sensors, 21 (9). pp. 1-21. ISSN 1424-8220. (Published)
Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Mohd Azraie, Mohd Azmi and Mohd Noor, Ahmad and Nur Akmal, Abd. Rahman and Khairil Anuar, Khairi (2021) Near-infrared spectroscopy for ganoderma boninense detection in oil palm: An outlook. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 117-126. ISBN 978-981-33-4597-3
Mazlan, Abu Seman and Sharifah Maszura, Syed Mohsin and A. M. A., Zaidi and M. F. S., Koslan and Z. M., Jaini (2021) Experimental of Inverted-T Shape Reinforced Concrete Wall Subjected to Blast Load. Key Engineering Materials, 879. pp. 254-262. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Md Noor, Ariffin and Mostafa, Tarek and Khan, Maksudur R. (2021) Photocatalytic degradation of organic pollutant using visible active - boron doped photocatalyst. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-8., 1092 (012062). ISSN 1755-1315 (Published)
Mohamad Izuddin, Saikhon and Khairil Azman, Masri and Ahmad Kamil, Arshad and Muhammad Faris, Mohd Rizam and Shahnewaz, Shoaib Md. and Rashida, Ferdaus (2021) Evaluation of Flexible Pavement Distresses due to Undesirable Commercial Vehicles Activity. In: IEEE International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen (Virtual). pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)
Mohamad Rizza, Othman and Zulkifly, Jemaat and Chin, Sim Yee and Mohd Arman, Abd Kadir and Hairul Hisham, Ismail and Shafie, Mohammad and Faried, Abdullah (2021) Intensified equipment for producing high purity mtbe. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohamad Saifullah, Samsudin and Ahmad Kamil, Arshad and K. A., Masri and Siti Norsita, Rawi and Hasmawati, Mat Hassan and Nurakmal Hayati, Mustakim (2021) Characterisation of colloidal nanosilica modified asphalt binder. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-13., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Mohamad Syafiq, Abdul Wahab and Alia Aqilah, Ghazali and Nurul Faizah, Abd Ghapar and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2021) Thin film nanocomposite (Tfnc) membranes: Future direction of Tfnc synthesis for alcohol dehydration. Surfaces and Interfaces, 25 (101165). pp. 1-17. ISSN 2468-0230. (Published)
Mohamad Syaiful Izwan, Alies and Nur Zalikha, Khalil (2021) Effect of alumina/graphene hybrid nano reinforcement to the adhesion and mechanical properties of adhesively bonded aluminum alloy with epoxy. Materials Today: Proceedings, 51 (2). pp. 1437-1443. ISSN 2214-7853. (Published)
Mohamad Zikri Amin, Awang and Mohd Azrul Hisham, Mohd Adib (2021) ReVwalk gamification for cerebral palsy kids. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohamed, Abdullahi Ali and Soon, Yee Wong and Lau, Teck Leong and Farooqi, Mohd Ahmadullah and Putra Jaya, Ramadhansyah and Al-Saffar, Zaid Hazim and Haryati, Yaacob (2021) Durability phenomena of bitumen and bituminous pavement materials. The Open Civil Engineering Journal, 15. pp. 279-289. ISSN 1874-1495. (Published)
Mohammad, Abdul Jalil and Moniruzzaman, Md. and Parvez, Md. Shohan and Siddika, Ayesha and Abdul Gafur, Md. and Repon, Md. Reazuddin and Hossain, Md. Tanjim (2021) A novel approach for pineapple leaf fiber processing as an ultimate fiber using existing machines. Heliyon, 7 (8). pp. 1-9. ISSN 2405-8440. (Published)
Mohammad Hazim, Mohamad Hamdan (2021) Effect of laminated parameters on mechanical properties hybrid juteramie reinforced unsaturated polyester composite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohammed Hamood Hezam, Alshameri and Oumer, Ahmed Nurye and Azizuddin, Abd Aziz (2021) Novel compact fin and tube heat exchanger made of reinforced composite plate fins. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohd Ali Hanafiah, Shaharudin and A. R., Yusoff and Amir, Aziz (2021) Influence of cutting parameters to surface area roughness in dimple machining using milling process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9094-9100. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Mohd Amiruddin, Fikri and Wan Mohd Faizal, . and Hasyiya Karimah, Adli and R., Mamat and W. H., Azmi and Zafri Azran, Abdul Majid and Anwar Ilmar, Ramadhan (2021) Characteristic of TiO2-SiO2 nanofluid with water/ethylene glycol mixture for solar application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). pp. 1-13. ISSN 2289-7879. (Published)
Mohd Azrul Hisham, Mohd Adib (2021) Aplikasi Teknologi Pediatrik dalam kejuruteraan bioperubatan bidang yang perlu diterokai. UMP News .
Mohd Azrul Hisham, Mohd Adib (2021) Kejuruteraan bioperubatan revolusi dunia kesihatan. Berita Harian .
Mohd Azrul Hisham, Mohd Adib and Chik Ming, Mok and Nur Afikah, Khairi @ Rosli and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat (2021) CardioVASS device: For cardiology trainee. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohd Azrul Hisham, Mohd Adib and Muhammad Nor Hakim, Hassan (2021) Covid run game serious game for health : Covid-19 preventive care. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohd Fadzil Faisae, Ab Rashid (2021) Tiki-taka algorithm: a novel metaheuristic inspired by football playing style. Engineering Computations, 38 (1). pp. 313-343. ISSN 0264-4401. (Published)
Mohd Fadzil Faisae, Ab Rashid and Ariff Nijay, Ramli (2021) A review of assembly line balancing optimisation with energy consideration using meta-heuristic algorithms. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 236 (5). pp. 475-485. ISSN 2041-2975. (Published)
Mohd Fahmi Haikal, Mohd Ghazali and Mohd Rosli, Mohd Hasan and Anasyida, Abu Seman and Dorett, Dillon Dipagk and Najib, Mukhtar and Putra Jaya, Ramadhansyah (2021) A review of asphaltic crack healing approaches and Its mechanism. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 16878434. (Published)
Mohd Faizal, Ali Akhbar and Akmal Wani, Sulong (2021) Surgical drill bit design and thermomechanical damage in bone drilling: A review. Annals of Biomedical Engineering, 49 (1). 29 -56. ISSN 0090-6964. (Published)
Mohd Faizan, Jamaluddin and Norazwina, Zainol and Nurul Shareena Aqmar, Mohd Sharifa (2021) Troubleshooting on biogas production by using factorial analysis in sewage treatment plant (STP). In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2020) , 6 August 2020 , Universiti Malaysia Pahang. pp. 1755-1762., 46 (4). ISSN 2214-7853 (Published)
Mohd Farid, Ismail and Azmi, W. H. and R., Mamat and Hamisa, A. H. (2021) Experimental investigation on Newtonian Behaviour and Viscosity of TiO2/PVE nanolubricants for application in Refrigeration System. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021) , 22-23 June 2021 , Kuala Lumpur, Malaysia (Virtual). pp. 1-11.. (Unpublished) (Unpublished)
Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853 (Published)
Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Mohamad Zairi, Baharom and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) Non-Invasive Study: Monitoring the Heart Rate and SpO2 of the New Born using InfaWrap Device. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 1-6. (20611046). ISBN 978-1-7281-4246-3 (Published)
Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Mohamad Zairi, Baharom and Nur Hazreen, Mohd Hasni (2021) Improving the Infant-Wrap (InfaWrap) device for neonates using MyI-Wrap mobile application. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 239-248.. ISBN 978-981-16-0866-7 (Published)
Mohd Haziman, Wan Ibrahim and Shahiron, Shahidan and Algaif, Hassan Amer and Ahmad Farhan, Hamzah and Putra Jaya, Ramadhansyah (2021) Properties of Self-Compacting Concrete with Coal Bottom Ash Under Aggressive Environments. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore. ISBN 978-981-16-2395-0
Mohd Herwan, Sulaiman and Zuriani, Mustaffa and Ahmad Johari, Mohamad and Mohd Mawardi, Saari and Mohd Rusllim, Mohamed (2021) Optimal power flow with stochastic solar power using barnacles mating optimizer. International Transactions on Electrical Energy Systems, 31 (5). pp. 1-2. ISSN 2050-7038. (Published)
Mohd Hisyam, Mohd Ariff and Imran Saifullah, Ishak and Mohd Zamri, Ibrahim and Mohammad Fadhil, Abas and Rahimah, Jusoh and Shakib, Mohammed Nazmus and Waheb Abdul Jabbar, Shaif Abdullah and Razali, Muda (2021) An ultra high frequency 921 mhz array antenna for rfid reader. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohd Jamil Mohamed, Mokhtarudin and Mohamad Fairul, Hubakri and Mohd Amirul Syafiq, Zamri and Mohd Noor Akmal, Hamzah and Rabiatul Adawiyah, Roslan (2021) Design and development of test rig for PIV fluid flow experiment for biomedical engineering application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Mohd Najib, Razali and Alkaf, Alawi Abdulqader A. and Mohd Khairul Nizam, Mohd Zuhan (2021) Formulation of water-based white colour paint from waste titanium dioxide. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1905-1909., 48 (6). ISSN 2214-7853 (Published)
Mohd Razali, Hanipah and M. Haziq Adham, Rosli (2021) Performance characteristics of a small poppet valve crankshaft engine in free-piston engine mode. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 9149 -9157. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2021) A new piston referencing algorithm for qualitative assessment of free-piston engine generator performance. In: Lecture Notes in Mechanical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 935-948., 46. ISSN 2195-4356 (Published)
Mohd Rosdi, Salleh (2021) Thermophysical and optimization of performance and emission of turbocharged si engine using gasoline, ethanol and fusel oil blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Mohd Rosli, Hainin and Nur lzzi, Md Yusoff (2021) Kurangkan kerosakan jalan. Utusan Malaysia .
Mohd Warid, M. N. and Al-Saffar, Z. H. and Putra Jaya, Ramadhansyah and Masri, K. A. and Muzamir, Hasan and Mudjanarko, S. W. (2021) Performance of nano kaolin clay modified bitumen under aging through the viscosity. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (012064). ISSN 1755-1315 (Published)
Mousay, Mohammed and Chai, Yew Ying and Doh, Shu Ing and Lim, Kar Sing (2021) Degradation of glass fiber reinforced polymer (GFRP) material exposed to tropical atmospheric condition. Key Engineering Materials, 879. pp. 265-274. ISSN 1662-9795. (Published)
Mudjanarko, Sri Wiwoho and Rasidi, Nawir and Koespiadi, . and Setiawan, Wahyu and Mohd Haziman, Wan Ibrahim and Mohd Irwan, Juki and Putra Jaya, Ramadhansyah (2021) Fondasi pracetak trapesium: Teknik menggambar Autocad. Scopindo Media Pustaka, Indonesia. ISBN 978-623-92163-6-8
Mudjanarko, Sri Wiwoho and Rasidi, Nawir and Wan Ibrahim, Mohd Haziman and Putra Jaya, Ramadhansyah and Mangi, Sajjad Ali (2021) Panduan pembuatan panel Beton. Narotama University Press, Indonesia. ISBN 978-602-6557-67-4
Muhamad Firdaus, Juhari and Atiqah, Mohd Shahabuddin and Nurhamizah Adlin, Abdul Halim and Khairatun Najwa, Mohd Amin (2021) Production of recycled paper reinforced cellulose nanofiber (CNF). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Muhamad Rozikin, Kamaluddin and M. F. F., Ab Rashid (2021) Modelling and Optimization of Asymmetric Vehicle Routing Problem Using Particle Swarm Optimization Algorithm. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-58.. ISBN 978-981-15-9505-9 (Published)
Muhammad Faez, Mohamad Tajudin (2021) The effect of processing parameters on microstructure and mechanical properties of aluminium 6061 semisolid metal billet. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Muhammad Faris, Ramli and Khairil Azman, Masri and Ahmad Kamil, Arshad and Mohamad Izuddin, Saikhon and Shoaib, Md Shahnewaz (2021) Assessing surface defects of flexible pavement at parking lot due to undesirable commercial activities. In: IEEE International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen (Virtual). pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)
Muhammad Haziq Adham, Rosli (2021) Investigations of a four-stroke flexible valve timings system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Razali, Hanipah).
Muhammad Hilmi, Jalil and Omar, Nadzeri and Muhd Hazli, Mazlan and Mahendran, Kugendran and Mohd Firdaus, Mak Nanyan (2021) Polymeric spinal cage developed via ct-fea. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Muhammad K. A., Saienudin and M. F. F., Ab Rashid (2021) A study of parallel machine scheduling in an electronic industry using heuristics approach. In: The 2nd International Conference on Technology, Engineering and Sciences (ICTES 2021) , 3 - 4 April 2021 , Langkawi, Kedah & Online Conference. pp. 1-5., 2401 (1). (Published)
Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Fadhilah, Che Jamil and Ong, Huei Ruey (2021) Free convection boundary layer flow over a horizontal circular cylinder in Al2 O3-Ag/water hybrid nanofluid with viscous dissipation. Malaysian Journal of Fundamental and Applied Sciences, 17 (1). pp. 20-25. ISSN 2289-5981. (Published)
Muhammad Ridzuan, Kamaruzaman (2021) Investigation of reaction parameters and kinetics for the synthesis of sorbitol-branched azelaic acid ester. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Muhammad Sahrulfahmi, Md Senan and Mohamad Athmar Afiq, Shalahuddin and Muhammad Syazrin, Rasdi and Nur Halimahtun, Manap and Nurainaa, Mohd Yusof and Juliawati, Alias (2021) Tri-Electrode fushoku test kit. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Muhammad Sheraz, Ahmad and Chin, Kui Cheng and Prakash, Bhuyar and Atabani, A.E and Pugazhendhi, Arivalagan and Thúy LanChi, Nguyen and Witoon, Thongthai and Jun Wei, Lime and Joon, Ching Juan (2021) Effect of reaction conditions on the lifetime of SAPO-34 catalysts in methanol to olefins process – A review. Fuel, 283 (118851). pp. 1-10. ISSN 0016-2361. (Published)
Muhammad Sheraz, Ahmad and Mohd Hasbi, Ab. Rahim and Tariq Mohammed, Alqahtani and Rabah, Mouras and Thongthai, Witoon and Lim, Jun-Wei and Cheng, C. K. and Khan, Md. Maksudur Rahman (2021) A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway. Chemosphere, 276 (130128). pp. 1-18. ISSN 0045-6535. (Unpublished) (Unpublished)
Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Muhammad Farhan, Zolkepli (2021) Urban landfills investigation for leachate assessment using electrical resistivity imaging in Johor, Malaysia. Environmental Challenges, 6 (100415). pp. 1-10. ISSN 2667-0100. (Published)
Muhammad khair aiman, badrol hisham and Nur afiqah, adnan (2021) The potential usage of palm oil mill effluent as animal feeder for poultries. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Muhd Norhasri, Muhd Sidek and Hamidah, Mohd Saman and Mohd Fadzil, Arshad and Putra Jaya, Ramadhansyah and Mohd Faizal, Md Jaafar and Siti Rahimah, Rosseli and Hafizah, Muhamad Azlan (2021) Strength and durability properties of nanometakolined ultra high performance concrete (UHPC) using response surface model (RSM) approach. Malaysian Construction Research Journal, 14 (3). pp. 138-149. ISSN 1985-3807. (Published)
Muzamir, Hasan and M. S. I., Zaini and A. S., Zulkafli and Abdul, Wahab and Hokabi, A. A. and K. A., Masri and Putra Jaya, Ramadhansyah and Winter, M. J. and Hyodo, Masayuki and Sholichin, M. and Riyanto, Haribowo and M. S., Zulkafli (2021) Geotechnical properties of bauxite: A case study in Bukit Goh, Kuantan, Malaysia. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection, ICWRDEP 2021 , 7 August 2021 , Malang, Virtual. pp. 1-7., 930 (012098). ISSN 1755-1315 (Published)
Muzamir, Hasan and M. S. I., Zaini and N. A. A., Hashim and Wahab, A. and K. A., Masri and Putra Jaya, Ramadhansyah and Hyodo, M. and Winter, M. J. and Sholichin, M. and Haribowo, R. (2021) Stabilization of kaolin clay soil reinforced with single encapsulated 20mm diameter bottom ash column. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection (ICWRDEP 2021) , 7 August 2021 , Malang, Indonesia (Virtual). pp. 1-9., 930 (012099). ISSN 1755-1315 (Published)
Muzamir, Hasan and M. S. I., Zaini and N. A. W., Hong and Abdul, Wahab and K. A., Masri and Putra Jaya, Ramadhansyah and Hyodo, M. and Winter, M. J. and Sholichin, M. and Haribowo, R. (2021) Sustainable ground improvement method using encapsulated polypropylene (PP) column reinforcement. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection (ICWRDEP 2021) , 7 August 2021 , Malang, Indonesia (Virtual). pp. 1-9., 930 (012016). ISSN 1755-1315 (Published)
Muzamir, Hasan and Muhammad Syamsul Imran, Zaini and Ling, Sin Yie and Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Hyodo, Masayuki and Winter, Michael James (2021) Effect of Optimum Utilization of Silica Fume and Eggshell Ash to the Engineering Properties of Expansive Soil. Journal of Materials Research and Technology, 14. pp. 1401-1418. ISSN 2238-7854. (Published)
N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)
N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Performance of Ocean Thermal Energy Conversion Closed Rankine Cycle Using Different Working Fluids. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-12., 1062 (012040). ISSN 1757-899X (Published)
N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Simulation Modeling The Performance of Ocean Thermal Energy Conversion Power Cycle. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-12., 1062 (012034). ISSN 1757-899X (Published)
N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Techno-economic efficiencies and environmental criteria of Ocean Thermal Energy Conversion closed Rankine cycle using different working fluids. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. , 1062 (012042). ISSN 1757-899X (Published)
N., Sazali and W. N. W., Salleh and A. F., Ismail (2021) Polymeric Membrane for CO2/CH4 Separation. In: Polymeric Membranes for Water Purification and Gas Separation. Materials Research Foundations, Millersville, PA, vol. 113, Chapter 2, pp. 203-242. ISBN 978-1-64490-163-2
N., Zainol and Sidek, N. S. M. and Ya’acob, A. (2021) Production of high strength bioliquid from municipal solid waste (MSW) using mixed culture. In: IOP Conference Series: Materials Science and Engineering; 1st International Conference on Electrical Energy and Power Engineering (ICEEPE 2020) , 25 -26 August 2020 , Penang, Malaysia. pp. 1-11., 1045 (1). ISSN 1757-899X (Published)
N. A. A., Razali and N. M. A., Ghani and B. S., Bari (2021) Lifting and stabilizing of two-wheeled wheelchair system using interval type-2 fuzzy logic control based spiral dynamic algorithm. Bulletin of Electrical Engineering and Informatics, 10 (6). pp. 3019-3031. ISSN 2089-3191. (Published)
N. E., Jasni and K. A., Masri and R. P., Jaya (2021) A Review of Morphological and Chemical Properties of Porous Asphalt. Construction, 1 (2). pp. 45-49. ISSN 2785-8731. (Published)
N. S., Romali and N. S., Othman and N. N., Mhd Ramli (2021) The application of green roof for stormwater quantity and quality improvement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Virtual. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)
N. S. H., Harith and F., Tongkul and M. I., Adiyanto and A. N., Rizalman (2021) Effect of long-distance earthquake from Philippines and Sulawesi to Sabah region. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012012). ISSN 1755-1307 (Published)
Nadhilah Aqilah, Shahdan and Balasundram, Vekes and Shameli, Kamyar and Ali, Roshafima Rasit and Norazana, Ibrahim and Ruzinah, Isha (2021) Co-pyrolysis of empty fruit bunch and high-density polyethylene over HZSM-5 : Thermogravimetric, kinetic and thermodynamic analysis. In: Energy Proceedings. 13th International Conference on Applied Energy, ICAE 2021 , 29 November - 2 December 2021 , Bangkok. pp. 1-6., 22. ISSN 2004-2965 (Published)
Nadhirah Aqilah, Azizuddin and Nurul Sa'aadah, Sulaiman (2021) Risk analysis of corroded oil and gas pipeline using bayesian network approach. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nadiah, Mokhtar (2021) Biosorption of methylene blue dye using seaweed biomass. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: A. Aziz, Edriyana).
Nadiatul Adilah, Ahmad Abdul Ghani and M., Lukman (2021) Trend of bed load material and bed load transport in Sungai Kenau for year 2013 until 2020. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (1). ISSN 1755-1307 (Published)
Nadiatul Adilah, Ahmad Abdul Ghani and Siti Aisyah, Zakaria and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli and Mahyun, A. W. (2021) Relationship between WQI, heavy metal and sedimentation in Sg Kenau, Kuantan, Pahang using WQ-HeMeS Model. In: IOP Conference Series: Earth and Environmental Science, 3rd International Conference on Civil and Environmental Engineering , 18 November 2020 , Malaysia. pp. 1-12., 646 (012066). ISSN 1755-1315 (Published)
Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Juliawati, Alias and Nasrul Azuan, Alang (2021) Design and development of motorbike roof shield for delivery service. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Narayanamurthy, Vigneswaran and Jeroish, Z E. and Bhuvaneshwari, K. S. and Fahmi, Samsuri (2021) Hepatitis C virus (HCV) diagnosis via microfluidics. Analytical Methods, 13 (6). pp. 740-763. ISSN 1759-9660 (print); 1759-9679 (online). (Published)
Natanamurugaraj, Govindan and Maniam, Gaanty Pragas and Mohd Hasbi, Ab. Rahim and Ahmad Ziad, Sulaiman and Azilah, Ajit and Chatsungnoen, Tawan and Chisti, Yusuf (2021) Production of renewable lipids by the diatom amphora copulata. Fermentation, 7 (1). pp. 1-21. ISSN 2311-5637. (Published)
Nelfiyanti, Nelfiyanti and N. M. Zuki, N. M. and Nurul Aqilah Jazatul, Azhar (2021) Identification of ergonomic issues among Malaysian Automotive Assembly Workers by using the Nordic Body Map Method. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 69-81.. ISBN 978-981-15-9505-9 (Published)
Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamed and M. F. F., Ab. Rashid (2021) Ergonomics study in Quick Response Manufacturing (QRM) automotive workstation environment to overcome employee complaints. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 681-693. ISBN 978-981-16-4115-2
Ng, C. C. and R. A., Rahman and S. W., Ahmad (2021) Factors affecting the enforcement of environmental regulation: The case of erosion and sediment control plan. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Virtual. pp. 1-9., 682 (1). ISSN 1755-1307 (Published)
Ng, Cui Ming and Putra Jaya, Ramadhansyah and Haryati, Awang (2021) The influence of eggshell as coarse aggregate replacement in hot mix asphalt. CONSTRUCTION, 1 (1). pp. 1-11. ISSN 2785-8731. (Published)
Noor Fairuz, Md Roskan and Norazwina, Zainol and Ahmad Syahiman, Mohd Shah and Alyaa Afiqah, Zi (2021) Environmental-friendly extraction of chlorophyll from pineapple plantation waste for dye sensitized solar cell (DSSC) fabrication. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Noor Ida Amalina, Ahamad Nordin and Gnanasekaran, Surenthiran and Jun Haslinda, Shariffuddin and Saidatul Shima, Jamari (2021) Recovering value from waste: Development of G-Nanocellulose derived from ananas comosus leaves. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Noor Sheena Herayani, Harith and Viliana, Jainih and Mohd Azizul, Ladin and M. I., Adiyanto (2021) Assessing the vulnerability of Kota Kinabalu buildings. Civil Engineering and Architecture, 9 (5). pp. 1-10. ISSN 2332-1091. (Published)
Noor Suraya, Romali and Nadiatul Adilah, Ahmad Abdul Ghani (2021) Flood damage prediction system for disaster risk reduction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Noor Suraya, Romali and Othman, N. S. and Mhd Ramli, N. N. (2021) The application of green roof for stormwater quantity and quality improvement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)
Nor Azmi, Johari and Juliawati, Alias and Aliaa, Zanurin and Nurul Shuhada, Mohamed and Nasrul Azuan, Alang and Mohd Zamzuri, Mohd Ghani (2021) Anti-corrosive coatings of magnesium : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1842-1848., 48 (6). ISSN 2214-7853 (Published)
Nor Hazwani, Aziz (2021) Nutrient enhancement of flooded soil by symbiotic soil fungi. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nor Nabilah, Mustapha and Syamimi Mardiah, Shaharum and Ahmad Afif, Mohd Faudzi (2021) Let’s tasmik mobile apps : Quran tasmik application using deep learning. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nor Nisa Balqis, Mohammad and Agus, Arsad and Choi, Hyoung Jin and Norzita, Ngadi and Mohd Shaiful Zaidi, Mat Desa (2021) Influences of pristine carbon nanotube on the rheological properties of compatibilized polylactic acid/natural rubber nanocomposite. In: Materials Today: Proceedings, Sustainable & Integrated Engineering International Conference (SIE2019) , 9-10 December 2019 , Putrajaya. pp. 951-955., 39 (Part 2). ISSN 2214-7853 (Published)
Nor Shafiqah, Mohd-Nasir and Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin (2021) Synergistic catalysis of bi-metals in the reforming of biomass-derived hydrocarbons: A review. International Journal of Hydrogen Energy, 46 (60). pp. 31000-31023. ISSN 0360-3199. (Submitted) (Submitted)
Nor Syukriah, Khalid and M. F., Hassan and Mohd Hafizi, Zohari and Muhammad Rais, Rahim (2021) A strain-wavelength modelling of low-frequency cantilever fibre Bragg grating accelerometer. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. pp. 1-13. ISSN 0954-4062. (Published)
Norazlianie, Sazali and Asogan, Arjun (2021) Modified ghee/clarified butter composition for food technology. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and Mimi Sakinah, Abdul Munaim (2021) Reformed polyimide/nanocrytalline cellulose for gas separation. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Norazlina, H. and Kamal, Yusoh (2021) Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites. Polymer Bulletin, 78 (12). 6911 -6933. ISSN 0170-0839(Print); 1436-2449(Online). (Published)
Norazmira Wati, Awang (2021) Study oil thermal-physical properties for nanocellulose nanoparticles for sae40 engine oil for tribological behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Norazwina, Zainol and Loh, Jenny and Rozaimi, Abu Samah (2021) Application of ionic liquid with pineapple leaf juice in microbial growth inhibition. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Mohamad Shaiful, Abdul Karim and Nur Shahira, Mat Hussain (2021) Cellulose extraction from pineapple leaves to produce dielectric materials. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Norazwina, Zainol and Nurfarhana, Mustafa and Nor Hazwani, Aziz and Azahani Natasha, Azman and Mohamad Shaiful, Abdul Karim (2021) Dielectric materials development using bio-waste: A review. Journal of Electrical Systems and Information Technology (JESIT), 10 (47). pp. 1-25. ISSN 2314-7172. (Published)
Norhafidzah, Mohd Saad (2021) Optimal planning of photovoltaic distributed generation considering uncertainties using monte carlo pdf embedded MVMO-SH. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Norhafzan, B. and Aqida, S. N. and Khairil, C. M. (2021) Optimization of laser melting parameter to enhanced surface properties in hot press forming die. IOP Conference Series: Materials Science and Engineering, 1078 (012020). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)
Norhafzan, B. and Khairil, C. M. and Aqida, S. N. (2021) Laser cladding process to enhanced surface properties of hot press forming die: A review. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-8., 1078 (012037). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)
Norliana, Bakar and Siew, Choo Chin (2021) Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties. In: Key Engineering Materials . pp. 284-293., 879. ISSN 1662-9795 (Published)
Norsuhailizah, Sazali and Zawati, Harun and Tijjani, Abdullahi and Faiz Hafeez, Azhar and Azlinnorazia, Ahmad and Nurul Izwanie, Rasli and Norazlianie, Sazali (2021) Potential of Transforming Sodalite from Synthesis Kaolin with a Mild Condition of the Hydrothermal Method. Biointerface Research In Applied Chemistry, 12 (6). pp. 7376-7393. ISSN 2069-5837. (Published)
Norsyamimi, Rosli and Abdul Rahimi, Abdul Rahman and Intan Suhana, Mohd Razelan and Azlina, Ismail and Muzamir, Hasan (2021) Impact of bauxite mining on quality of life : An analysis of road users. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012040). ISSN 1755-1307 (Published)
Nour, Abdurahman Hamid and Humadi, Magdi Ahmed (2021) Effect of synthesized ump surfactant for emulsification and stabilization of water-incrude oil emulsions. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nour, Abdurahman Hamid and Rosli, Mohd Yunus and Nour, Azhary Hamid and Abdelrahman, Ali Hassan and Omer, Manal Suliman and Rushdi, Gaafar (2021) A novel ump demulsifier, nd-20-02 assistedmicrowave technology for separation of crude oil emulsions. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nur Afikah, Khairi @ Rosli and Mohd Azrul Hisham, Mohd Adib and Ming, Mok Chik and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) Experimental study between TPU Flex and Silicon Materials Mechanical Properties as an alternatives in development of the CardioVASS Heart Model. In: 6 th Kuala Lumpur International Conference on Biomedical Engineering (BioMed2021) , 28 -29 July 2021 , Virtual. pp. 1-14.. (Published)
Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Natasha, Mohd Sukri and Nur Hazreen, Mohd Hasni (2021) Comparative study between TPU flexible and soft epoxy resin materials on development of heart model for CardioVASS device. In: Intelligent Manufacturing and Mechatronics Proceedings of SympoSIMM 2020. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 913-931. ISBN 978-981-16-0865-0 (Print); 978-981-16-0866-7 (Online)
Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) The CardioVASS Heart Model: Comparison of Biomaterials between TPU Flex and Soft Epoxy Resin for Biomedical Engineering Application. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 224-229. (20611023). ISBN 978-1-7281-4245-6 (Published)
Nur Afiqah, Mohd Radzi and R. A., Rahman and Doh, Shu Ing and M., Esa (2021) A Comparative Study on the Readiness Parameters of Highway Construction Projects. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. pp. 1-12., 641 (012008). ISSN 1755-1315 (Published)
Nur Alya Syamimie, Muzaidi and Mohd Amiruddin, Fikri and Khairul Nizar Syazwan, Wan Salihin Wong and Azfi Zaidi, Mohammad Sof and R., Mamat and Norfatihah, Mohd Adenam and Muhamad Yuzaini Azrai, Mat Yunin and Hasyiya Karimah, Adli (2021) Heat absorption properties of CuO/TiO2/SiO2 trihybrid nanofluids and its potential future direction towards solar thermal applications. Arabian Journal of Chemistry, 14 (4). pp. 1-12. ISSN 1878-5352. (Published)
Nur Athirah, Badrulhisham (2021) Monitoring of aircraft noise level on residents nearby Malaysian airport. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurul Shahida, Mohd. Shalahim).
Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Maarof, Rashidi and Naher, Sumsun (2021) An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology (114). pp. 1233-1240. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)
Nur Farhayu, Ariffin and Khairunisa, Muthusamy and Fadzil, Mat Yahaya and Sharifah Maszura, Syed Mohsin and Khairul Anuar, Shahid and Saffuan, Wan Ahmad and Abdul Muiz, Hasim and Muhammad Nor Syahrul, Zaimi and Nurul Natasha, Nasrudin and Muhammad Rafie, Ashaari and Nor Hasanah, Abdul Shukor Lim and Mohd Warid, Hussin and Hamidun, Mohd Noh (2021) Coal bottom ash lightweight brick. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nur Hazimah Syazana, Abdul Razak and Nur Shahira, Mat Hussain and Nurul Hazlina, Noordin and Syamimi Mardiah, Shaharum and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2021) Flat lens design using phase correction technique for horn antenna applications. Telkomnika, 19 (1). 213 -219. ISSN 1693-6930. (Published)
Nur Syahirah, Mohd Sabli (2021) Wireless monitoring and arima stream analytics system for freshwater lobster farm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).
Nur Syahirah, Mohd Sabli and Mohd Faizal, Jamlos and Fatimah, Dzaharudin (2021) Sustainability of fertigation in agricultural crop production by IoT system: A review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 87-96. ISBN 978-981-33-4597-3
Nuraainaa Diyana, Mohamed Zaidi and Noor Sabrina, Ahmad Mutamim (2021) Treatment of sulfidic spent caustic using catalytic wet air oxidation with pure granular activated carbon. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nurfarhana, Mustafa and Nur Hazimah Syazana, Abdul Razak and Nurhafizah, Abu Talip Yusof and Mohamad Shaiful, Abdul Karim (2021) Development of microwave antenna for cancer treatment. In: Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Switzerland, pp. 127-136. ISBN 978-3-030-70917-4
Nurhanis Sofiah, Abd Ghafar (2021) Thermophysical properties of stabilized copper oxide-polyaniline-palm oil based nanofluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurhanis Sofiah, Abd Ghafar and Mahendran, Samykano and S., Shahabuddin and K., Kadirgama and A. K., Pandey (2021) An experimental study on characterization and properties of eco‑friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1388-6150 (print); 1588-2926 (online). (In Press / Online First) (In Press / Online First)
Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, A. K. (2021) A comparative experimental study on the physical behavior of mono and hybrid RBD palm olein based nanofluids using CuO nanoparticles and PANI nanofibers. International Communications in Heat and Mass Transfer, 120 (105006). pp. 1-13. ISSN 0735-1933. (Published)
Nurizaty, Z. and Mariyana, A.A.K and Shek, P.N. and Mohd Najmi, A.M. and Mujedu K, Adebayo and Mohamed Tohami, M. A Sif and Putra Jaya, Ramadhansyah (2021) Experimental investigation on post-fire performances of fly ash concrete filled hollow steel column. International Journal of High-Rise Buildings, 10 (4). pp. 335-344. ISSN 2234-7224. (Published)
Nurizzatul Atikha, Rahmat and Mujahid Husaimi, Che Hassan and Mohammad Rozaki, Ramli (2021) Enhanced smoke wire technique in small scaled quasi-atmospheric boundary layer wind tunnel. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nurmadiha, Osman (2021) Evaluation of arima and ann stream analytics for air quality monitoring system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Ain, Johari (2021) Stainless steel 316lhydroxyapatite composite via metal injection moulding : properties study. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Ain Syuhadah, Mohammad Khorri and Nurul Sa'aadah, Sulaiman (2021) Bayesian network for probability risk analysis of biomass boiler in renewable energy plant. In: E3S Web of Conferences. 2021 International Conference on Process Engineering and Advanced Materials, ICPEAM2020 , 13 - 15 July 2021 , Kuching. pp. 1-5., 287 (03008). ISSN 2555-0403 (Published)
Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Norhayati, Abdullah and Osazuwa, Osarieme Uyi and Ruwaida, Abdul Rasid and Nursofia, Mohd Yunus (2021) Esterification reaction of free fatty acid in used cooking oil using sulfonated hypercrosslinked exchange resin as catalyst. Chemical Engineering Research and Design, 180. pp. 414-424. ISSN 0263-8762. (Published)
Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Osazuwa, Osarieme Uyi and Chin, Sim Yee and Y. H., Taufiq-Yap (2021) H2-rich syngas from glycerol dry reforming over Ni-based catalysts supported on alumina from aluminum dross. International Journal of Hydrogen Energy, 46 (60). pp. 1-17. ISSN 0360-3199. (Published)
Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Uyi Osazuwa, Osarieme and Sim, Yee Chin and Y.H., Taufiq-Yap (2021) H2-rich syngas from glycerol dry reforming over Nibased catalysts supported on alumina from aluminum dross. International Journal of Hydrogen Energy, 46 (60). pp. 30959-30975. ISSN 0360-3199. (Published)
Nurul Farhana, Abu Kasim (2021) Synthesis of graphene by pullulan-assisted exfoliation of graphite using ultrasonic bath. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Husna Elyana, Hanifa (2021) Properties of nickel-supported palm oil fuel ash (Ni-POFA) catalyst produced via in situ glycine-nitrate combustion for methane cracking. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Nadia, Mohd Zawawi (2021) Performance of automotive air conditioning system using al2o3-sio2 nanolubricants. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Najihaha, . and Gebremariam, M. A. and Azmir, Azhari and Mulubrhan, Freselam (2021) Simulation modeling of a manufacturing process using Tecnomatix plant simulation software. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 56-62. ISSN 2636-9575. (Published)
Nurul Shareena Aqmar, Mohd Sharif (2021) Production of ferulic acid via feruloyl polysaccharide hydrolysis of banana stem waste using soil mixed culture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Shareena Aqmar, Mohd Sharifa and Norazwina, Zainol and Mohd Faizan, Jamaluddin (2021) Factorial analysis of Ferulic Acid production from biowaste. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1763-1769., 46 (Part 4). ISSN 2214-7853 (Published)
Nurul Syafiqah, Mohd Azmi and Danial, Mohamed and Mohd Yuhyi, Mohd Tadza (2021) Effect of plasticity characteristics on the electrical resistivity of bentonite. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. 796 -800., 48 (4). ISSN 2214-7853 (Published)
Nurul Syafiqah, Mohd Azmi and Danial, Mohamed and Mohd Yuhyi, Mohd Tadza (2021) Effects of various relative humidity conditions on copper corrosion behavior in bentonite. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 801-806., 48 (4). ISSN 2214-7853 (Published)
Nurul Syazwana, Noor Azmi (2021) Simulation and experimental study of biogas explosion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Syazwana, Noor Azmi (2021) Simulation and experimental study of biogas explosion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Nurul Wahida, Abdullah and Shariza, Jamek (2021) In silico molecular analysis of fructooligosaccaride producing enzymes. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Nurulfadzilah, Hasan and Nur Shahira, Mat Hussain and Nur Hazimah Syazana, Abdul Razak and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2021) Fabrication and characterization of epoxy resin–barium titanate at G-band using waveguide technique. In: IOP Conference Series: Materials Science and Engineering, First International Conference on Electrical Energy and Power Engineering (ICEEPE 2020) , 25-26 August 2020 , Penang, Malaysia. pp. 1-9., 1045 (012012). ISSN 1755-1315 (Published)
Nurziana, Kong and Nur Zalikha, Khalil (2021) Water absorption mechanism and mechanical performance of adhesively joint aluminum alloy with GNP reinforced epoxy. Materials Today: Proceedings, 51 (2). pp. 1392-1398. ISSN 2214-7853. (Published)
Obi, Nasreldeen Ishag and Mohd Najib, Razali and Abdurahman, Hamid Nour (2021) Characterisation of bitumen, refined waste oil, and emulsifiers for coating and insulation purposes. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-8., 1092 (012021). ISSN 1757-899X (Published)
Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin and Fan, Xiaolei and Amenaghawon, Andrew Nosakhare and Mohammad Tazli, Azizan (2021) An insight into the effects of synthesis methods on catalysts properties for methane reforming. Journal of Environmental Chemical Engineering, 9 (1). pp. 1-15. ISSN 2213-3437. (Published)
Peddakapu, K. and M. R., Mohamed and M. H., Sulaiman and Srinivasarao, P. and Kishore, D. J. K. and P. K., Leung (2021) Cuckoo optimised 2DOF controllers for stabilising the frequency changes in restructured power system with wind-hydro units. International Journal of Ambient Energy, 42 (11). pp. 1-16. ISSN Print: 0143-0750, Online: 2162-8246. (Published)
Periasamy, Innarasi and Ramalingam, Mritha (2021) Iot based dust alerting and smartbin system for asthma patient. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Putra Jaya, Ramadhansyah (2021) Characterisation of microstructural and sound absorption properties of porous asphalt subjected to progressive clogging. Construction and Building Materials, 283. pp. 1-12. ISSN 0950-0618. (Published)
Putra Jaya, Ramadhansyah and A. A., Mohammed and Mwangi, P. M. and M. P., Anwar and Leong, Lau Teck and Jayaprakash, Jaganathan and Z. F., Mohamed Jaafar and Mashros, N. (2021) Nano-Silica modifier asphalt concrete under rutting resistance and shape memory component. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and A. H., Norhidayah and C. R., Ismail and Al-Saffar, Z. H. and K. A., Masri and Muzamir, Hasan and W. N. A., Wan Azahar (2021) The influence of nano kaolin clay as alternative binder on the penetration properties. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-5., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Al-Akhshar, A. M. and K. A., Masri and A. H., Norhidayah and M. N., Mohd Warid and H., Yaacob (2021) Resilient modulus prediction of nano-silica modified porous asphalt using finite element analysis. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Al-Saffar, Zaid Hazim and Haryati, Yaacob and M. K. I., Mohd Satar and N. S., Shah Rull and A., Mohamed and N. A., Hassan and M. N. M., Warid (2021) The influence of pelletRAP™ rejuvenator on the mechanical properties of reclaimed asphalt pavement. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Al-Saffar, Zaid Hazim and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar (2021) Impacts of maltene on the wettability and adhesion properties of rejuvenated asphalt binder. Arabian Journal for Science and Engineering. pp. 1-12. ISSN 1319-8025 (print); 2191-4281 (online). (Published)
Putra Jaya, Ramadhansyah and Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Mohd Rosli, Mohd Hasan and Sandu, Andrei Victor and Nabiałek, Marcin and Jez, Bartłomiej and Pietrusiewicz, Paweł and Kwiatkowski, Dariusz and Postawa, Przemysław and Mohd Mustafa Al Bakri, Abdullah (2021) Design of experiment on concrete mechanical properties prediction: a critical review. Materials, 14 (8). pp. 1-17. ISSN 1996-1944. (Published)
Putra Jaya, Ramadhansyah and K. A., Masri and E., Ganesan and Doh, Shu Ing and Jasni, N. E. and AlSaffar, Z. H. and Mohammed, A. A. (2021) Volumetric properties and abrasion resistance of stone mastic asphalt incorporating eggshell powder. IOP Conf. Series: Earth and Environmental Science, 682 (012058). pp. 1-7. ISSN 1755-1307 (Print); 1755-1315 (Online). (Published)
Putra Jaya, Ramadhansyah and K. A., Masri and E., Ganesan and Doh, Shu Ing and S. M. Z., Nur Syafiqah and Z. F., Mohamed Jaafar and N., Mashros (2021) Stress and strain characteristic of stone mastic asphalt incorporating eggshell powder. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Liew, N. and K. A., Masri (2021) Performance of porous asphalt mixture containing seashell as aggregate replacement. Construction, 1 (1). pp. 18-28. ISSN 2785-8731. (Published)
Putra Jaya, Ramadhansyah and M., Zulkarnain and Z. Z., Mukhtar and N. A., Md Khosim and M. I., Adiyanto and W. I., Mohd Haziman (2021) Prediction of flexural behavior of woven reinforced for concrete reinforcement. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and M. I., Adiyanto and Noram Irwan, Ramli and Noor Sheena Herayani, Harith and S.M.S.A., Razak and Syed Abdul Haris, Syed Mustapa (2021) Increment of material usage in construction of four storey reinforced concrete building due to seismic design. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Mangi, Sajjad Ali and Mohd Haziman, Wan Ibrahim and Norwati, Jamaluddin and Khahro, Shabir Hussain (2021) Influence of coal ash on the concrete properties and its performance under sulphate and chloride conditions. Environmental Science and Pollution Research. pp. 1-22. ISSN 1614-7499. (Published)
Putra Jaya, Ramadhansyah and Mohd Arif, Sulaiman and Rokiah, Othman and Khairunisa, Muthusamy and Chong, Beng Wei and Chek, Y. C. and Youventharan, Duraisamy and Doh, Shu Ing (2021) Compressive strength of concrete containing eggshell powder as partial cement replacement. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-14., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and N. E., Jasni and K. A., Masri and A. A., Mohammed and Z. F., Mohamed Jaafar and N., Mashros (2021) Newly developed aggregate gradation for five asean countries. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-6., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Norhidayah, Abdul Hassan and Erdem, Savas (2021) Editorial: trends and advanced materials for pavement and road infrastructure. Frontiers in Materials, 8. pp. 1-2. ISSN 2296-8016. (Published)
Putra Jaya, Ramadhansyah and Nurliyana, Ariffin and Mohd Mustafa Al Bakri, Abdullah and Postawa, Przemysław and Shayfull Zamree, Abd Rahim and Mohd Remy Rozainy, Mohd Arif Zainol and Śliwa, Agata and Mohd Firdaus, Omar and Wysłocki, Jerzy J. and Błoch, Katarzyna and Nabiałek, Marcin (2021) Effect of aluminium powder on kaolin-based geopolymer characteristic and removal of Cu2+. Materials, 14 (4). pp. 1-19. ISSN 1996-1944. (Published)
Putra Jaya, Ramadhansyah and Wan Nur Aifa, W. A. and Norhidayu, Kasim and Norfarah Nadia, Ismail and Mohd Rosli, Hainin and K. A., Masri and Mastura, Bujang and Zaid Hazim, Al-Saffar (2021) Behaviour of hot mix asphalt incorporating untreated and treated waste cooking oil. International Journal of Pavement Research and Technology. pp. 1-11. ISSN 1996-6814. (Published)
Putra Jaya, Ramadhansyah and Yuan, L. and K. A., Masri and Intan Suhana, Mohd Razelan and A. H., Norhidayah and M. N., Mohd Warid (2021) Performance of asphalt mixture incorporated with tin ore tailing. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Z. F., Mohamed Jaafar and K. A., Masri and N., Mashros and M. N., Mohd Warid and A. H., Norhidayah and H., Yaacob (2021) The effects of nano kaolin clay modified bitumen on the softening point and storage stability. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-5., 682. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Z.Y., Mahssin and Norhidayah, Abdul Hassan and Haryati, Yaacob and Mohd Hafiz, Puteh and Che Ros, Ismail and M., Mohammad Zainol and Mohd Zul Hanif, Mahmud (2021) Converting biomass into bio-asphalt – a review. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-18., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)
Putra Jaya, Ramadhansyah and Zaid Hazim, Al-Saffar and Haryati, Yaacob and Saleem, Mhmood Khleel and Mohd Khairul Idham, Mohd Satar and Bilema, Munder and Choy, Jau Lai and Mohd Zul Hanif, Mahmud (2021) A new approach to enhance the reclaimed asphalt pavement features: role of maltene as a rejuvenator. Road Materials and Pavement Design. pp. 1-24. ISSN 1468-0629. (Published)
R., Embong and A., Kusbiantoro and K., Muthusamy and N., Ismail (2021) Recycling of coal bottom ash (CBA) as cement and aggregate replacement material: A review. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-14., 682 (012035). ISSN 1755-1307 (Published)
Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2021) Ergonomics study on visual contribution of postural stability using Physio-Treadmill (PhyMill) for kid with cerebral. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 1137-1149.. ISBN 978-981-16-0866-7 (Published)
Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2021) Physio-Treadmill (PhyMill): Ergonomics Evaluation of Posture Impact on Kids with Cerebral Palsy using Digital Human Modeling (DHM) Simulation. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 1-6.. ISBN 978-1-7281-4245-6 (Published)
Rafiqul, Islam S. M. and Mimi Sakinah, Abdul Munaim and Zularisam, Abdul Wahid (2021) Improvement of enzymatic bioxylitol production from sawdust hemicellulose: optimization of parameters. Preparative Biochemistry & Biotechnology, 51 (10). pp. 1060-1070. ISSN 1532-2297. (Published)
Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4
Rahman, Md. Arafatur and Sze Wei, Tan and Rahman, Md Mustafizur and Md Muzahid, Abu Jafar (2021) Automated palm oil supply chain system with traceability. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rajan, Kumaresan and Mahendran, Samykano and K., Kadirgama and D., Ramasamy and Ngui, Wai Keng and Adarsh Kumar, Pandey (2021) 3D printing technology for thermal application: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 84-97. ISSN 2289-7879. (Published)
Ramadhan, Anwar Ilmar and Wan Azmi, Wan Hamzah (2021) The effect of nanoparticles composition ratio on dynamic viscosity of Al2O3-TiO2-SiO2 nanofluid. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1920-1923., 48 (6). ISSN 2214-7853 (Published)
Ramasamy, Linggamm and Quazi, Moinuddin Mohammed and Aiman, M.H. and Mahadzir, Ishak (2021) Laser celaning process for the removal of surface contaminants, corrosion and paint. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Ramli, Junid and Siregar, J. P. and Nor Azam, Endot and Jeefferie, Abd Razak and Wilkinson, Arthur N. (2021) Optimization of glass transition temperature and pot life of epoxy blends using response surface methodology (RSM). Polymers, 13 (19). pp. 1-18. ISSN 2073-4360. (Published)
Razak Ramesh, N. H. A. and Ghazali, M. R. and Ahmad, M. A. (2021) Sigmoid pid based adaptive safe experimentation dynamics algorithm of portable duodopa pump for parkinson’s disease patients. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 632-639. ISSN 2089-3191. (Published)
Razi, P. Z. and Mohamad Idris, Ali and Noram Irwan, Ramli (2021) Exploring risk associated to public road infrastructure construction projects. In: IOP Conference Series: Earth and Environmental Science; th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya (Virtual). pp. 1-9., 682 (1). ISSN 1755-1307 (Published)
Reji Kumar, Rajamony and Mahendran, Samykano and Pandey, A. K. and Kalidasan, B and Imtiaz, Ali Laghari and Kothari, Richa and Abusorrah, Abdullah M. and Sharma, Kamal and Tyagi, V. V. (2021) Utilization of solar energy for wastewater treatment: challenges and progressive research trends. Journal of Environmental Management, 297. pp. 1-23. ISSN 0301-4797. (Published)
Rohaida, Che Man and Nur Nadia, Mohd Zakaria and Nurul Nabila Huda, Baharudin and Siti Kholijah, Abdul Mudalip and Shalyda, Md Shaarani @ Md Nawi (2021) Immobilization of recombinant escherichia coli on hollow fiber membrane as whole cell biocatalyst for cyclodextrin (cd) production. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rohaida, Che Man and Nurul Nabila Huda, Baharudin and Nur Nadia, Mohd Zakaria and Zatul Iffah, Mohd Arshad and Siti Zubaidah, Sulaiman (2021) Production of cyclodextrin (cd) using immobilized recombinant Escherichia coli. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rohaida, Che Man and Ravichandaran, Thiviashanti and Muhammad Taufiq, A. Rahman (2021) Optimization of reaction parameters of cyclodextrin glycosyltransferase from bacillus licheniformis on cyclodextrin production. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rohaida, Che Man and Rosnida, Ab Rahim (2021) Immobilization of CGTase from Bacillus licheniformis on pineapple waste for production of cyclodextrin. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rokiah, Othman and Beng, Wei Chong and Putra Jaya, Ramadhansyah and Mohd Rosli, Mohd Hasan and Mohd Mustafa Al Bakri, Abdullah and Mohd Haziman, Wan Ibrahim (2021) Evaluation on the rheological and mechanical properties of concrete incorporating eggshell with tire powder. Journal of Materials Research and Technology, 14. pp. 439-451. ISSN 2238-7854. (Published)
Rokiah, Othman and Mohd Arif, Sulaiman and Chong, B. W. and Wong, C. W. and Youventharan, Duraisamy and Putra Jaya, Ramadhansyah and Nadiatul Adilah, Ahmad Abdul Ghani (2021) Effect of different positions of hollow section on the high strength concrete beam. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-10.. ISSN 1755-1315 (Published)
Rokiah, Othman and Putra Jaya, Ramadhansyah and Khairunisa, Muthusamy and Mohd Arif, Sulaiman and Youventharan, Duraisamy and Mohd Mustafa Al Bakri, Abdullah and Przybył, Anna and Sochacki, Wojciech and Skrzypczak, Tomasz and Vizureanu, Petrica and Sandu, Andrei Victor (2021) Relation between density and compressive strength of foamed concrete. Materials, 14 (11). pp. 1-22. ISSN 1996-1944. (Published)
Roshahliza, M. Ramli and Mohd Azrul Hisham, Mohd Adib and Idris, Mat Sahat and Nurul Aqilah, Herman and Mohamad Syazwan, Mohd Roni and Amirul Hafiz, Zexafiza (2021) Unmanned ground vehicle for covid-19 waste management. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Rosli, M. Arif Fikri and Pandey, A. K. and Samykano, M. and Sharma, Kamal and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Saidura, R. (2021) Thermal stability and light transmission capability of nano TiO2 enhanced phase change material as thermal energy storage. In: IOP Conference Series: Materials Science and Engineering; International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020) , 18 -19 December 2020 , Mathura, India. pp. 1-8., 1116 (012206). ISSN 1757-899X (Published)
Rosmazi, Rosli and Zamri, Mohamed (2021) Optimization of modified Bouc–Wen model for magnetorheological damper using modified cuckoo search algorithm. Journal of Vibration and Control, 27 (17-18). pp. 1-12. ISSN 1077-5463 (print); 1741-2986 (online). (Published)
Rostam, N. E. and Putra Jaya, Ramadhansyah and Md Rizal, Othman and Zack, L. E. H. and Mohd Haziman, W. I. (2021) Pervious concrete: The art of improving strength properties. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012065). ISSN 1755-1315 (Published)
Rusila Zamani, Abd Rashid and Norhasnidawani, Johari and Saiful Amri, Mazlan and Siti Aishah, Abdul Aziz and Nur Azmah, Nordin and Nurhazimah, Nazmi and S. N., Aqida and Mohd Aidy Faizal, Johari (2021) Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. Smart Materials and Structures, 30 (10). pp. 1-2. ISSN 0964-1726. (Published)
Rusiyanto, R. and Widodo, R. D. and Al-Janan, D. H. and Rohmah, K. and Siregar, J. P. and Nugroho, A. and Fitriyana, D. F. (2021) Effect of sintering temperature on the physical properties of Ba0.6Sr0.4TiO3 prepared by solid-state reaction. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8752 -8759. ISSN 2180-1606. (Published)
Ruzinah, Isha and Rohayu, Jusoh and Hafizah, Ramli and Normardhati, Mustafa and Wan Mohd Hafizuddin, Wan Yussof and Khairunnaim, Azmi (2021) Waste to fuel mobile pyrolyser. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
S., Sreenath and K., Sudhakar and A. F., Yusop (2021) Energy-exergy-economic-environmental-energo-exergo-enviroecono (7E) analysis of solar photovoltaic power plant: a case study of 7 airport sites in India. Sustainable Energy Technologies and Assessments, 47. pp. 1-18. ISSN 2213-1388. (Published)
S., Zainal Ariffn and Efendee, A. M. and Alias, M. and Redhwan, A. A. M. and Muhamed, M. N. and A. R., Yusoff (2021) Optimization on the effect of nozzle orifice coolant supply during machining automotive material Al319. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-9., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
S. K., Abdul Mudalip and M. N., Kathiman and N. A., Hashim and R., Che Man and Z. I. M., Arshad (2021) A short review on encapsulation of bioactive compounds using different drying techniques. Materials Today: Proceedings, 42 (1). pp. 288-296. ISSN 2214-7853. (Published)
S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
S. M. Z., Nur Syafiqah and K. A., Masri and N. E., Jasni and M., Hasan (2021) Performance of stone mastic asphalt incorporating Kenaf fiber. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. pp. 1-10., 641 (012001). ISSN 1755-1315 (Published)
S. N. M., Zainon and W. H., Azmi (2021) Heat Transfer Performance of Green Bioglycol-Based TiO2–SiO2 Nanofluids. Journal of Heat Transfer, 143 (11). pp. 1-10. ISSN 0022-1481. (Published)
S. N. M., Zainon and W. H., Azmi (2021) Stability and thermo-physical properties of green bio-glycol based TiO2-SiO2 nanofluids. International Communications in Heat and Mass Transfer, 126 (105402). pp. 1-13. ISSN 0735-1933. (Published)
S. S., Sufian and Noor Suraya, Romali and A. R., Rahimi and Mazlan, Abu Seman (2021) Current practice in rehabilitating old pipes for water distribution network in Malaysia. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-10., 641 (1). ISSN 1755-1307 (Published)
Saad, M.A. and N. H., Abdurahman and Rosli, Mohd Yunus (2021) Synthesis, characterization, and demulsification of water in crude oil emulsion via a corn oil-based demulsifier. Materials Today: Proceedings, 42 (1). pp. 251-258. ISSN 2214-7853. (Published)
Safwan, Shalbi and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2021) Measurement of neutron flux at thermal column using gold foil activation analysis and TLD detector: technical review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2 (83). pp. 25-43. ISSN 2289-7879. (Published)
Sambeth, Sharwin Kumar and Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2021) GTOP-PELLET : Green torrefied oil palm pellet. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Samykano, M. (2021) Mechanical property and prediction model for FDM-3D printed polylactic acid (PLA). Arabian Journal for Science and Engineering, 46 (8). pp. 7875-7892. ISSN 1319-8025 (print); 2191-4281 (online). (Published)
Samykano, M. (2021) Progress in one-dimensional nanostructures. Materials Characterization, 179 (111373). pp. 1-35. ISSN 1044-5803. (Published)
Sanderasagran, Ashwindran Naidu and Azizuddin, Abd Aziz and Oumer, Ahmed Nurye (2021) Novel bio-hybrid drag induced wind turbine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)
Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)
Saptaji, Kushendarsyah and Triawan, Farid and Sai, Tong Keong and Gebremariam, M. A. (2021) Deburring method of aluminum mould produced by milling process for microfluidic device fabrication. Indonesian Journal of Science and Technology, 6 (1). 123 -140. ISSN 2528-1410. (Published)
Seman, M. A. and Sharifah Maszura, Syed Mohsin and Zaidi, A. M. A. and Jaini, Z. M. (2021) Numerical investigation of steel reinforcement arrangement in reinforced concrete wall subjected to blast. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012039). ISSN 1755-1307 (Published)
Seydametova, Emine and Norazwina, Zainol (2021) Morphological, physiological, biochemical and molecular characterization of statin-producing penicillium microfungi isolated from little-explored tropical ecosystems. Current Research in Microbial Sciences, 2 (100044). pp. 1-8. ISSN 2666-5174. (Published)
Shah, L. Amer and Jolius, Gimbun and S., Nurdin (2021) Microwave assisted transesterification of waste cooking oil using immobilized lipase enzyme. In: 4th International Conference on Chemical and Bioprocess Engineering in conjunction with 26th Symposium of Malaysian Chemical Engineers (SOMChE-ICCBPE-2012) , 21-23 November 2012 , Kota Kinabalu, Sabah Malaysia. pp. 1-9.. (Published)
Shahnewaz, S. M. and K. A., Masri and Nadiatul Adilah, A. A. Ghani (2021) Porous asphalt modification using different types of additives: A review. Construction, 1 (1). pp. 44-53. ISSN 2785-8731. (Published)
Shalyda, Md Shaarani and Min, L. Y. and Man, R. C. and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman and Zatul Iffah, Mohd Arshad (2021) Effects of enzyme loading, incubation time and incubation temperature on sawdust hydrolysis by locally produced bacterial xylanase. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 14-22. ISSN 0126-8139. (Published)
Shamsudin, M. M. H. and Hamid, N. H. and M Sidek, M. N. and T Aziz, T.I.S. and Awang, H. (2021) Cracks monitoring and resistivity test for a double-storey house due to cavity in the soil. Civil Engineering and Architecture, 9 (5). pp. 1376-1388. ISSN 2332-1091. (Published)
Sharif, Mohd Zaki (2021) Performance of nanolubricants and r1234yf in automotive air conditioning system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Sheh Ching, Khong and Jia Jun, Yee and Putra Jaya, Ramadhansyah and Siti Nur Amiera, Jeffry and Norhidayah, Abdul Hassan and Haryati, Yaacob (2021) Nano charcoal ash: Environmentally pavement. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Shiave, Ali Imran and Mohan, Ram and Samykano, M. (2021) Morphological and growth characteristics of template-assisted electrodeposited cobalt nanowires: Effect of synthesis current density and temperature. MRS Advances, 6 (26). 659 -663. ISSN 2059-8521. (Published)
Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Mohd Zuki, Salleh (2021) Numerical solution on mixed convection heat transfer of ferrofluid over a horizontal circular cylinder. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Siti Nor Azlina, Mohd Ghazali and Muhamad Zahim, Sujod and Mohd Shawal, Jadin (2021) Forensic of Solar PV: A review of potential faults and maintenance strategies. In: 7th International Conference on Engineering and Emerging Technologies, ICEET 2021 , 27-28 October 2021 , Istanbul, Turkey. pp. 1-6.. ISSN 2409-2983 ISBN 978-166542714-2 (Published)
Siti Nur Alwani, Shafie and Nik Abdul Hadi, Md Nordin and Muhammad Roil, Bilad and Nurasyikin, Misdan and Norazlianie, Sazali and Zulfan Adi, Putra and Mohd Dzul Hakim, Wirzal and Alamin, Idris and Juhana, Jaafar and Zakaria, Man (2021) [EMIM][Tf2N]-Modified silica as filler in mixed matrix membrane for carbon dioxide separation. Membranes, 11 (371). pp. 1-14. ISSN 2077-0375. (Published)
Siti Nur Naqibah, Kamarudin and Mohd Rosli, Hainin and Muhammad Naqiuddin, Mohd Warid and Mohd Khairul Idham, Mohd Satar and Putra Jaya, Ramadhansyah (2021) The Usage of Treated Plastic as Additive to Improve the Asphalt Mixture’s Performance by Using Dry Mix Method. Key Engineering Materials, 879. pp. 126-135. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Siti Nursharah, Muhamad Zainon (2021) Heat transfer performance of green bio-glycol based TiO2-SiO2 nanofluids. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Siti Rahimah, Rosseli and Muhd Norhasri, Muhd Sidek and Hamidah, Mohd Saman and Mohd Fadzil, Arshad and Mohd Faizal, Md Jaafar and Ahmad Ruslan, Mohd Ridzuan and Putra Jaya, Ramadhansyah and Hafizah, Muhamad Azlan (2021) Ultra high-performance concrete as alternative repair method: A review. Journal of Failure Analysis and Prevention, 21 (6). 2072 -2080. ISSN 1547-7029. (Published)
Sofiah, A. G. N. and Samykano, M. and Shahabuddin, S. and Kadirgama, K. and Pandey, A. K. and Noor, M. M. (2021) A brief review on thermal behaviour of PANI as additive in heat transfer fluid. Emerging Advances in Integrated Technology, 2 (1). 47 -52. ISSN 2773-5540. (Published)
Sofiah, A. G. N. and Samykano, Mahendran and Pandey, A. K. and Kadirgama, K. (2021) Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments, 48 (101635). pp. 1-32. ISSN 2213-1388. (Published)
Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Effect of PV material, texturing, orientation and tracking on glare impact: A simulation study from an Indian airport. Cleaner Engineering and Technology, 4 (100236). pp. 1-11. ISSN 2666-7908. (Published)
Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Suitability analysis of solar tracking PV system in the airport based on glare assessment. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9061-9070. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and 2-Opt Operator. In: IEEE 19th Student Conference on Research and Development (SCOReD 2021) , 23-25 November 2021 , Kota Kinabalu, Malaysia. pp. 91-95.. ISBN 978-1-6654-0193-7 (Published)
Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and Swap Operator. In: IEEE International Conference on Computer System, Information Technology, and Electrical Engineering (COSITE 2021) , 20-21 October 2021 , Banda Aceh, Indonesia. pp. 181-185.. ISBN 978-1-6654-2509-4 (Published)
Sukumaran, Sreenath and Sudhakar, Kumarasamy and Ahmad Fitri, Yusop (2021) A Novel tool for sustainability assessment of energy projects. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Sumaya, Sarmin and Tarek, Mostafa and Roopan, Selvaraj Mohana and Chin, Kui Cheng and Khan, Md. Maksudur Rahman (2021) Significant improvement of power generation through effective substrate-inoculum interaction mechanism in microbial fuel cell. Journal of Power Sources, 484 (229285). pp. 1-9. ISSN 0378-7753. (Published)
Sumaya, Sarmin and Tarek, Mostafa and Selvaraj Mohana, Roopan and Chin, Kui Cheng and Khan, Maksudur R. (2021) Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater. Journal of Hazardous Materials, 415 (125587). pp. 1-10. ISSN 0304-3894. (Published)
Sunarti, Abd Rahman and Agamparam, Hematharshini (2021) Surface modification of pvdf membrane using formic acid to enhance the hydrophobicity for desalination. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Surenthiran, Gnanasekaran and Noor Ida Amalina, Ahamad Nordin and Saidatul Shima, Jamari and Jun Haslinda, Shariffuddin (2021) Effect of Steam-Alkaline coupled treatment on N36 cultivar pineapple leave fibre for isolation of cellulose. Materials Today: Proceedings. pp. 1-8. ISSN 2214-7853. (Published)
Surenthiran, Gnanasekaran and Nor Ida Amalina, Ahamed Nordin and Mimi Maisarah, Mahadi @ Hamidi and Jun Haslinda, Shariffuddin (2021) Effect of Alkaline treatment on the characteristics of pineapple leaves fibre and PALF/PP biocomposite. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8518-8528. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2021) Effects of gasification temperature and equivalence ratio on gasification performance and tar generation of air fluidized bed gasification using raw and torrefied empty fruit bunch. Chemical Engineering Transactions, 88. pp. 1-6. ISSN 2283-9216. (Published)
Syazwan Nizam, Moni and Edriyana, Abd Aziz and Anwar P. P., Abdul Majeed and Marlinda, Malek (2021) The prediction of blue water footprint at Semambu water treatment plant by means of Artificial Neural Networks (ANN) and Support Vector Machine (SVM) models Machine (SVM) models. Physics and Chemistry of the Earth, 123 (103052). pp. 1-7. ISSN 1474-7065. (Published)
Tasnim, Sadia and Ahmed Shaikh, Faiz Uddin and Sarker, Prabir and Doh, Shu Ing and Albtoush, Ja'far A. Aldiabat (2021) A comprehensive review of flexible pavement failures, improvement methods and its disadvantages. Key Engineering Materials, 879. pp. 136-148. ISSN 1013-9826 (print); 1662-9795 (online). (Published)
Teoh, Xin Ni and Airul Sharizli, Abdullah and Mohd Shawal, Jadin (2021) Development of wearable real time monitoring system for hand tremor through wireless communication. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Teuku, Rihayat and Agung Efriyo, Hadi and Nurhanifa, Aidy and Aida, Safitri and Siregar, J. P. and Cionita, Tezara and Agustinus Purna, Irawan and Mohammad Hazim, Mohamad Hamdan and Deni Fajar, Fitriyana (2021) Biodegradation of polylactic acid-based bio composites reinforced with chitosan and essential oils as anti-microbial material for food packaging. Polymers, 13 (22). pp. 1-24. ISSN 2073-4360. (Published)
Tezara, Cionita and Hadi, Agung Efriyo and Siregar, J. P. and Zalinawati, Muhamad and Mohammad Hazim, Mohamad Hamdan and Oumer, A. N. and Jamiluddin, Jaafar and Irawan, Agustinus Purna and Rihayat, Teuku and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13 (17). pp. 1-17. ISSN 2073-4360. (Published)
Thangavel, Mythili and Chin, Sim Yee (2021) Gas chromatography analysis for the performance evaluation of the palm oil cross-metathesis using 1-octene. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 40-44. ISSN 2673-0537. (Published)
Thangavel, Mythili and Chin, Sim Yee (2021) Value add palm oil through cross metathesis using 1-octene. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Thurga Devi, Munusamy and Chin, S. Y. and Tarek, Mostafa and Khan, Maksudur R. (2021) Sustainable hydrogen production by CdO/exfoliated g-C3N4 via photoreforming of formaldehyde containing wastewater. Materials Today: Proceedings, 46 (60). pp. 30988-30999. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)
Thurga Devi, Munusamy and Chin, Sim Yee and Khan, Maksudur R. (2021) Physicochemical and electrochemical characterization of CdO/g-C3N4 nanocomposite for the photoreforming of petrochemical wastewater. Materials Today: Proceedings, 42 (Part1). pp. 15-21. ISSN 2214-7853. (Published)
Thurga Devi, Munusamy and Khan, Maksudur R. and Chin, Sim Yee (2021) Photoelectrochemical performance of P@MoS2 for hydrogen evolution reaction. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)
Thurga Devi, Munusamy and Sim, Yee Chin and Khan, Md. Maksudur Rahman (2021) Photoreforming hydrogen production by carbon doped exfoliated g-C3N4: Optimization using design expert®software. In: Materials Today: Proceedings, International Symposium of Reaction Engineering, Catalysis & Sustainable Energy (RECaSE 2021) , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-7., 57 (Part 3). ISSN 2214-7853 (Published)
Toma, Farhana Sultana and Zulkifly, Jemaat and Beg, M. D. H. and Khan, M R and R. M., Yunus (2021) Comparison between lignin extraction by alkaline and ultrasound-assisted alkaline treatment from oil palm empty fruit bunch. IOP Conference Series: Materials Science and Engineering, 1095 (012027). pp. 1-10. ISSN 1757-8981(Print); ISSN: 1757-899X (Online). (Published)
Ummu Afeera, Zainulabid and Norhidayah, Kamarudin and Ahmad Hafiz, Zulkifly and Gan, Han Ming and Tay, Darren Dean and Siew, Shing Wei and Aini Syahida, Mat Yassim and Sharmeen Nellisa, Soffian and Ahmad Afif, Mohd Faudzi and Ahmad Mahfuz, Gazali and Gaanty Pragas, Maniam and Hajar Fauzan, Ahmad (2021) Near-complete genome sequences of Nine SARS-CoV-2 strains harboring the D614G mutation in Malaysia. ASM Journals Microbiology Resource Announcements, 10 (31). pp. 1-3. (Published)
Veerendra, A. S. and A. A., Shah and M., SubbaRao and Mohd Rusllim, Mohamed (2021) Digital Fuzzy Current Controlled Light-Emitting Diode Driver with Power Factor Correction. International Journal of Photoenergy, 2021 (6618284). ISSN 1687-529X (Online). (Published)
Veerendra, A. S. and A. A., Shah and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya and Puiki, Leung (2021) Wavelet Transform Based Fault Identification and Reconfiguration for a Reduced Switch Multilevel Inverter Fed Induction Motor Drive. Electronics, 10 (9). pp. 1-17. ISSN 2079-9292. (Published)
Veerendra, A. S. and Mohd Rusllim, Mohamed and Pui, Ki Leung and Shah, Akeel Abbas (2021) Hybrid power management for fuel cell/supercapacitor series hybrid electric vehicle. International Journal of Green Energy, 18 (2). pp. 128-143. ISSN 1543-5075 (Print), 1543-5083 (Online). (Published)
Veerendra, A. S. and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya (2021) A novel fault-detection methodology of proposed reduced switch MLI fed induction motor drive using discrete wavelet transforms. International Transactions on Electrical Energy Systems, 31 (4). pp. 1-25. ISSN 2050-7038. (Published)
Veerendra, Arigela Satya and Shah, Akeel A. and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya and Leung, Puiki (2021) Wavelet transform based fault identification and reconfiguration for a reduced switch multilevel inverter fed induction motor drive. Electronics, 10 (9). pp. 1-17. ISSN 2079-9292. (Published)
Vikneswary, Rajendaran and Syed M., Saufi and M. A. K. M., Zahari and Abdul Wahab, Mohammad (2021) Membrane support formulation and carrier selection in supported liquid membrane for extraction of zwitterionic form of Glutamic acid. Materials Today: Proceedings, 41 (Part 1). pp. 116-121. ISSN 2214-7853. (Published)
W. H., Azmi and K., Abdul Hamid and A. I., Ramadhan and A. I. M., Shaiful (2021) Thermal hydraulic performance for hybrid composition ratio of TiO2–SiO2 nanofluids in a tube with wire coil inserts. Case Studies in Thermal Engineering, 25 (100899). pp. 1-14. ISSN 2214-157X. (Published)
Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. N., Arifin and W., Tasnim (2021) Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. Arabian Journal for Science and Engineering, 46 (8). pp. 7699-7718. ISSN 1319-8025 (print); 2191-4281 (online). (Published)
Wajiha Tasnim, Urmi (2021) Wear rate reduction mechanism of minimum quantity lubrication to enhance machinability using hybrid nano-coolant (TiO2- Al2O3). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Wan Ismail, Ibrahim and Mohd Rusllim, Mohamed and R. M. T. R., Ismail and Leung, P. K. and Xing, W. W. and A. A., Shah (2021) Hydrokinetic energy harnessing technologies: a review. Energy Reports, 7. 2021 -2042. ISSN 2352-4847. (Published)
Wan Mohd Eqhwan, Iskandar and Ong, Huei Ruey and Khan, Md. Maksudur Rahman and Ridzuan, Ramli and Rohaya, Mohamed Halim (2021) Influence of ultrasound on alkaline treatment of empty fruit bunch fibre: preliminary study. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-8., 1098 (012002). ISSN 1757-899X (Published)
Wan Naimah, Wan Ab Naim and Azam, Ahmad Bakir and Mohd Jamil, Mohamed Mokhtarudin and Nik Abdullah, Nik Mohamed and Bee, Ting Chan (2021) The effect of variation of myocardium wall thickness on the evolution of ischemic heart wall stress and movement: A computational modelling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020 , 1 - 3 March 2021 , Langkawi. 298 -302. (9398744). ISBN 978-1-7281-4245-6 (Published)
Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Azam, Ahmad Bakir and Putri Nur Alia Nasuha, Mohd Nor and Nik Abdullah, Nik Mohamed (2021) Study of Oxygen Deprivation on Cardiomyocyte using Electro-chemical Coupled Mathematical Model. In: The 6th IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Hybrid Conference, Langkawi, Malaysia. pp. 1-5.. (Published)
Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Bee, Ting Chan and Einly, Lim and Azam, Ahmad Bakir and Nik Abdullah, Nik Mohamed (2021) The study of myocardial ischemia-reperfusion treatment through computational modelling. Journal of Theoretical Biology, 509 (110527). pp. 1-11. ISSN 0022-5193. (Published)
Wan Nur Azhani, Wan Samsudin and Wai Fook, Wan and Mohd Zamri, Ibrahim and Kamarul Hawari, Ghazali and Ahmad Afif, Mohd Faudzi and Rohana, Abdul Karim (2021) Electronic components detection and recognition using deep learning for learning purpose. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Wei, Ting Tan and Yih, Miin Liew and Mohd Jamil Mohamed, Mokhtarudin and Pirola, Selene and Wan Naimah, Wan Ab Naim and Shahrul Amry, Hashim and Xiao, Yun Xu and Einly, Lim (2021) Effect of Vessel Tortuosity on Stress Concentration at the Distal Stent–Vessel Interface: Possible Link With New Entry Formation Through Biomechanical Simulation. Journal of Biomechanical Engineering, 143 (8). pp. 1-9. ISSN 0148-0731. (Published)
Wu, Hailong and Depernet, Daniel and Lanfranchi, Vincent and Benkara, Khadija Ei Kadri and M. A. H., Rasid (2021) A novel and simple torque ripple minimization method of synchronous reluctance machine based on torque function method. IEEE Transactions on Industrial Electronics, 68 (1). pp. 92-102. ISSN 0278-0046. (Published)
Xinni, Liu and Kamarul Hawari, Ghazali and Fengrong, Han and Izzeldin, I. Mohd (2021) Automatic detection of oil palm tree from UAV images based on the deep learning method. Applied Artificial Intelligence, 35 (1). pp. 13-24. ISSN 0883-9514. (Published)
Yahya Mohammed, Al-Naggar and Norlida, Jamil and Mohd Firdaus, Hassan and Ahmad Razlan, Yusoff (2021) Condition monitoring based on IoT for predictive maintenance of CNC machines. In: Procedia CIRP: 18th CIRP Conference on Modelling of Machining Operations , 15-17 Jun 2021 , Ljubljana, Slovenia. pp. 314-318., 102. ISSN 2212-8271 (Published)
Yashini, K.Selvanathan (2021) Microbial acid production by indigenous microorganism from ananas cosmosus. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasratun, Masngut).
Yasmeen, Hafiz Zaki Ahmed (2021) The performance of integrated ultrasonic membrane anaerobic system (IUMAS) in treating sugar cane wastewater. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Yeong, Yi Ling and Pang, Sook Fun and Putranto, Aditya and Jolius, Gimbun (2021) Optimisation of microwave-assisted extraction (MAE) of anthraquinone and flavonoids from Senna alata (L.) Roxb. Natural Product Research. pp. 1-5. ISSN 1478-6427. (In Press / Online First) (In Press / Online First)
Yet, Ong Zu and Rassem, Taha H. and Rahman, Md. Arafatur and M. M., Rahman (2021) Improved attentive pairwise interaction (API-Net) for fine-grained image classification. In: IEEE Emerging Technology in Computing, Communication and Electronics (ETCCE 2021) , 21-23 December 2021 , Dhaka, Bangladesh. pp. 1-6. (21605301). ISBN 978-166548364-3 (Published)
Yoke, Wang Cheng and Chi, Cheng Chong and Man, Kee Lam and Wai, Hong Leong and Lai, Fatt Chuah and Suzana, Yusup and Setiabudi, H. D. and Tang, Yuanyuan and Jun, Wei Lim (2021) Identification of microbial inhibitions and mitigation strategies towards cleaner bioconversions of palm oil mill effluent (POME): A review. Journal of Cleaner Production, 280 (Part 1). pp. 1-23. ISSN 0959-6526 (print), 1879-1786 (online). (Published)
Youventharan, Duraisamy and Putra Jaya, Ramadhansyah and Jeevithan, K. M. and Rokiah, Othman and Mohd Arif, Sulaiman and Yaacob, H. (2021) Durability Performance of Concrete Debris and Bottom Ash as an Alternative Track Ballast Material. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-12., 682 (012053). ISSN 1755-1315 (Published)
Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Azhar, Ahmad Syafiq Jazatul and Nelfiyanti, . (2021) The effect of quick response manufacturing in supply chain activities: A case study of automotive company in Malaysia. In: Lecture Notes in Mechanical Engineering; Recent Trends in Manufacturing and Materials Towards Industry 4.0. , 6 August 2020 , Universiti Malaysia Pahang. pp. 547-553.. ISSN 2195-4356 ISBN 978-981-15-9504-2 (Published)
Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Hadi, M. Z. I. A. (2021) The effect of quick response manufacturing in factory layout: Assessment using Witness software. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 -20 January 2021 , Pekan, Malaysia. pp. 1-18., 1078 (012027). ISSN 1757-899X (Published)
Yuvan, Ramadhas and Devarajan, Ramasamy (2021) Combustion monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)
Zaini, M. A. H. P. a and Saari, M. M. and Nadzri, N. A. and Aziz, Z. and Ramlan, N. H. and Tsukada, K. (2021) Extraction of flux leakage and eddy current signals induced by submillimeter backside slits on carbon steel plate using a low-field amr differential magnetic probe. IEEE Access, 9. pp. 146755-146770. ISSN 2169-3536. (Published)
Zainon, S. N. M. and Azmi, W. H. (2021) Recent progress on stability and thermo-physical properties of mono and hybrid towards green nanofluids. Micromachines, 12 (2). pp. 1-35. ISSN 2072-666X. (Published)
Zainon, S. N. M. and Azmi, W. H. and Hamisa, A. H. (2021) Thermo-physical properties of TiO2-SiO2 hybrid nanofluids dispersion with water/bio-glycol mixture. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-12., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)
Zalinawati, Muhamad (2021) Performance of buri palm (corypha utan) reinforced epoxy composite : effect of alkali treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Zambri, Harun and Firdaus, Mohamad Hamzah and Shuhaimi, Mansor and Abdus Samad, Mahmud and Hashimah, Hashim and Mohamed Thariq, Hameed Sultan and N. M. Zuki, N. M. and Mohd Danial, Ibrahim and Hasril, Hasini and Mohd Rashdan, Saad and Ahmad Rasdan, Ismail (2021) Covid-19 effects on students' teaching and learning perspectives in Malaysian varsities. Pertanika Journal of Social Sciences and Humanities, 29 (4). pp. 2729-2748. ISSN 0128-7702. (Published)
Zetty Akhtar, Abdul Malek and Md Mustafizur, Rahman and Kadirgama, Kumaran and Saidur, Rahman and Wahaizad, Safiei (2021) Effects of temperature and concentration on thermophysical properties of TiO2-MWCNTs -doped graphene nanofluids. In: 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 920-925., 48 (4). ISSN 2214-7853 (Published)
Zhang, Qian and Liu, Haifeng and Liu, Qiang and Che, Jialing and Yang, Weiwu and Ma, Jurong and Doh, Shu Ing and Lim, Kar Sing (2021) Study the fire resistance of desert sand concrete (DSC) with interface phase through uniaxial compression tests and analyses. Advances in Civil Engineering, 2021. p. 21. ISSN 1687-8094. (Published)
Zhang, Qian and Liu, Qiang and Liu, Haifeng and Che, Jialing and Chen, Xiaolong and Doh, Shu Ing (2021) Effect of desert sand on the uniaxial compressive properties of mortar after elevated temperature. Physics and Chemistry of the Earth, Parts A/B/C, 121. pp. 1-12. ISSN 1474-7065. (Published)
Zhao, Yue and Han, Fengrong and Guo, Linyi and Zhang, Jun and Zhang, Haidong and Izzeldin, I. Mohd and Kamarul Hawari, Ghazali (2021) Flotation separation of poly (ethylene terephthalate and vinyl chloride) mixtures based on clean corona modification: Optimization using response surface methodology. Waste Management, 136. pp. 184-194. ISSN 0734242X. (Published)
Zulfiqar Ali, Jattak and Norhidayah, Abdul Hassan and Mohd Khairul Idham, Mohd Satar and Putra Jaya, Ramadhansyah and Mohd Rosli, Hainin (2021) Laboratory investigation of coal bottom ash modified warm mix asphalt. Jurnal Teknologi (Sciences and Engineering), 83 (4). pp. 63-74. ISSN 0127-9696 (print); 2180-3722 (online). (Published)