Items where Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Number of items: 659.

UNSPECIFIED (2008) A study on blending effects of biodiesel with pure diesel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

A. N., Sulaiman and Asiah, Kassim (2008) Technology in ESL: Evaluation on the Use of Software in Pronunciation Learning. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing., Glasgow, pp. 67-74. ISBN 978-0-947649-30-2

A. N. M., Rose and M. M., Noor and M. M., Rahman and M. R. M., Rejab (2008) Polypropylene Reinforced With Recycle Polyethylene Terephthalate As An Alternative Material For New Plastic Product. In: 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. pp. 1-5..

Aainaa Izyan, Nafsun (2008) Product optimization in vinyl acetate monomer process using model predictive control. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ab Rahman, Mohd Nooh (2008) Noise source identification of engine dynamometer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Azrin Firdaus, A Rahim (2008) Line followers robot using PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abd Halim, Abdullah @ Shafei (2008) Carbon dioxide (CO2) laser cut quality of acrylic using different feed rate and constant power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Hisham, Mohamad (2008) Investigation on mechanical properties of heat treated low carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Rahman Fahmi, Mat Hasan (2008) Development of storage bending tools cabinet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Razak, Muhammad Ab. Basith (2008) Wireless mobile ultrasonic detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Faizal, Abd Halim (2008) Simulation test of disc brake functionality using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hafiz, Ramli (2008) Design and development of single seater electric sccoter for short distance application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hakim, Kassim (2008) Ultrasonic motion detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Latif Aizat, Mohamad Haniff (2008) Speed control of DC motor using pole placement controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Rashid, Muhammad (2008) Design and fabricate walkingaided tool for paralyzed people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Samad, Noor Asma Fazli (2008) Optimization of polymer processing in batch reactor using neural network. , [Research Report: Research Report] (Unpublished)

Abdul Wahab, Muhammad Nubli and Zamzain, Ahmad (2008) Pembangunan alat ukur profil personaliti dan modul peningkatan prestasi kaedah biofeedback untuk meningkatkan prestasi diri. , [Research Report: Research Report] (Unpublished)

Abdul Zul Afif, Abd Manap (2008) Removal efficiency of zinc and copper in synthetic wastewater using constructed wetland. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Abdulbari, Hayder A. and Abd Al-Rubai, Rana Thabet (2008) Influence of Rayleigh Number in Turbulent and Laminar Region in Parallel-Plate Vertical Channels. Asian Journal of Applied Sciences, 1 (4). pp. 265-285. ISSN 1996-3343. (Published)

Abdullah, Ariffin (2008) Portable solar street lamp. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdullah, Muhd Asran (2008) Water level in tank using level sensor and PID controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdullah Omar, Abdul Aziz (2008) Thickness effect on the performance of composite tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abros Noori, Anvardeen (2008) Room monitoring system using radio frequency (RF) technology and passive infrared sensor (PIR). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Adawiyah, Ismail (2008) Isolation, characterization and identification of microorganism from soil contaminated with pesticide. 37, Universiti Malaysia Pahang.

Addie Irawan, Hashim and M. F., Abas and A., Hazha and N. H., Nordin (2008) Microstepping Drives Approaches to Improve Machine Carriage/ Conveyor Movement. In: Proceedings of the 4th International Colloquium on Signal Processing and its Applications (CSPA 2008) , 7- 9 March 2008 , Kuala Lumpur. pp. 587-590..

Adezeno, Sagoli Olid (2008) DC motor control using LQR algorithm. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Adlina Farhana, Jamaluddin (2008) The effect of temperature and catalyst concentration of ultrasonic reactor for biodiesel production from waste cooking oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiq, Hamdan (2008) Numerical analysis of in-cylinder flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Afnil Danial, Ahmad Meri (2008) Isolation of strach degrading microorganism from local hot spring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad, Saifullah (2008) Dual mode mobile robot : application using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Abdul Ghani, Nadiatul Adilah (2008) A study on sediment distribution of Sungai Kuantan. , [Research Report: Research Report] (Unpublished)

Ahmad Arif Syazni, Abd Rahman (2008) Software development by integrating the integrated effort flow analysis and boothroyd - DFA. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Fadli, Ahmad Sanusi (2008) Influence of different sintering temperature on mechanical behavior of alumina (AL2O3) reinforced aluminum metal matrix composite (Al MMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Farhan, Md. Shokeri (2008) Effect of organic & biofertilizer on the growth of patchouli plant (Pogostemon cablin). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Farhan Hakim, Azmi (2008) Improvement of bus roof section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Firdaus, Makhtar (2008) Alarm triggered multiple display thermometer using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Hafiz, Zainudin (2008) Development of alternative force converter for electric generator uses. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Junaidy, Jaapar (2008) Extraction of gaharu essential oil using ultrasonic assisted steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Juzaili, Alias (2008) An 16-bit fixed-point square root operation using VHDL. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Kamal, Masrur (2008) Microwave assisted extraction of patchouli essential oil using ethanol as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Khairul Anwar, Samsuddin (2008) The effects of the heating rate on the pyrolysis behavior of empty fruit bunch biomass. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Ahmad Khairul Azwan, Jantan Anua Jah (2008) Development of auto re-closer earth leakage circuit breaker (AR-ELCB). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Mazrul, Kamarudin (2008) Effect of surface treatment on fatigue life of pistion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nazaruddin, Mat Zin (2008) Design and development of automatic drum deheader. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Safiuddin, Ahmad Saudi (2008) Design and development of hamsters cage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Sapuan, Hasan (2008) Design and simulation on the air dam for Proton Pesona by using CFD tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shahril Ashraf, Mohamed (2008) Modification of piston skirt design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Shazwi, Kamaruzaman (2008) Carbon Dioxide (CO2) laser cut quality of acrylic. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syahir, Zainal (2008) Energy management of battery to DC motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syakir, Mohamad (2008) Energy audit for the UMP library and energy efficiency project proposal. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zulfadhli, Mohd Khalid (2008) Design, analysis and fabricate of low speed water tunnel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aini, Ahmad (2008) Malu Lambang Iman. In: Friday Wisdom. Penerbit UMP, pp. 89-94. ISBN 9789675080074

Aizuddin, Abdul Rahim (2008) Dynamic modelling and control of mass spring system with large load uncertainty. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Alauddin Hafiz, Yusof (2008) Air conditioning study for automotive application / Alauddin Hafiz Yusof. Faculty of Mechanical Engineering), Universiti Malaysia Pahang.

Alexius, An'yan (2008) Effect of grinding process parameters on grinding force of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ali, Zuraina and Kassim, Hafizoah and Mohd Ali, Zarina and Mohd Radzuan, Noor Raha and Khamis, Nor Yazi (2008) Designing standard plagiarism guidelines for internet based material. , [Research Report: Research Report] (Unpublished)

Amar Safuan, Alyusi (2008) Development of vending machine with prepaid payment method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ameey Azleenda, Abd Rahim (2008) Road preference survey for commuting trips from to workplace. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Aminurrasyid, Abas (2008) USB mug warmer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amir Ghaffari, Khalid (2008) Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC-CO. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Iskandar, Ariffin (2008) Design and develop auto car jacker power by internal car power. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirah Aainaa, Abdul Jalil (2008) Child monitoring system (CHILD). Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Amirulhamzah, Zainuddin (2008) Design and manufacture the gearing and burning system for the diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirulnizam, Mohd (2008) Development of brake system model for educational purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amminatul Farhayu, Abdul Talib (2008) Biodiesel production via two steps catalyzed process : the study on effect of temperature and catalyst weight percent to the biodiesel yield, FFA content and acid value. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Amran, Kaharudin (2008) Design and development of piston-controlled intake port for 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anabil, Ubil (2008) Treatment of industrial wastewater using constructed wetland : removal of orthophosphate and ammonia nitrogen. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ang, Liqi (2008) Lathe machine optimum cutting speed for different materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Anizan, Wan Ramli (2008) Refrigeration study for domestic application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aravinthan, Rajaandra (2008) Automated guided vehicle application for dispenser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ardian Syah, Mohd Yusof (2008) Command by speech recognition. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ariff, Che Mohd Noor (2008) PID control system implementation in embedded system for DC motor speed control. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Ashvaany, Egambaram (2008) RFID wireless door system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Asiah, Kassim and A. N., Sulaiman (2008) Courseware Material Development for Complete Beginners in Learning Hiragana and Katakana. In: Studies in Language and Textbook Analysis. University of Strathclyde Publishing, Glasgow, pp. 83-90. ISBN 978-0-947649-30-2

Asiah, Kassim and A. N., Sulaiman (2008) Effective Reading Workbook. Penerbit UMP, Kuantan, Pahang.

Asong, Angkat (2008) The removal of plumbum and zinc using activated carbon. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Awang, Mohd Ghani and Sinnadurai, Suriya Kumar and Abdul Wahab, Muhammad Nubli (2008) A study on the development of strategic tools for study orientation skills towards achieving academic excellence in the university. , [Research Report: Research Report] (Unpublished)

Azah Fadhilah, Ramly (2008) Intake valve flow optimization for single cylinder four stroke petrol engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azhar, Yusop (2008) Conceptual design of two-plate injection mould for UMP's keychain. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aziema, Mohamad Azizi (2008) Effect of grinding process parameters on surface roughness of aluminium alloy 6061-T6. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aziman, Abdullah and Ong, Lai Chin (2008) Mobile Student Verification System for Major Examination (S-VEC). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 109-116. ISSN 1985-5176. (Published)

Azizul Rahman, Abd Aziz (2008) Improvement and optimization of tire nut removal with 114 PCD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azril Nizam, Muhamad (2008) Minutiae point exraction for skeleton-based fingerprint image. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Bakar, R. A. (2008) New design of a two stroke modular engine for multipurpose usage with lean burn capability. , [Research Report: Research Report] (Unpublished)

Bangit, Grunsin (2008) Study to determine the optimum parameter of the electro discharge machine die sinked 4 litres bottle neck. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Carl-Ventolinson, Anak Emley (2008) Fabrication of new cylinder head concept model for 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Ku Mohd Faizul, Che Ku Mohd Salleh (2008) Linear quadratic regulator (LQR) speed control for DC motor using MC68HC11. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Che Mohd Akhairil Akasyah, Che Anuar (2008) Development of the can crusher machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chew, Chun Chi (2008) Internal structure change of carbon tool steel after heat treatment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chua, Share Kung (2008) Monitoring the quality of essential oil from etilingera SP.4 (Zingiberaceae) by gas chromatography-mass spectrometry (GC-MS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

D., Ramasamy and R. A., Bakar and Mohd Fadzil, Abdul Rahim and M. M., Noor (2008) Comparative Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design Using Simulation And Experimental Techniques. In: Proceedings of the 4th IASTED International Conference, Power And Energy Systems (AsiaPES 2008) , 2-4 April 2008 , Langkawi, Malaysia. pp. 359-362..

Daelami, Aminuddin (2008) Design and fabricate test rig structure for an automotive turbocharger testing apparatus. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Darlene, Mohamad Douglas (2008) Home automation system using power line communication. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang.

David, A/L Joseph @ Dave (2008) The effect of ph and biomass concentration on lead (Pb) adsorption by Aspergillus niger from simulated waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dewi Haryani, Sulaiman (2008) Extraction of patchouli oil using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dhanakumar, Suppiah (2008) Extraction of lemon oil from citrus limon peels via ultrasonic assisted extraction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dilah, Kadir (2008) Scale up of biopolymer from shake flask to 20l stirred tank fermenter. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dinie, Muhammad (2008) Fault detection using neural network. Faculty of Chemical & Natural Resources Engineering , University Malaysia Pahang.

Dinnish, A/L Thegaraju (2008) Design and fabricate a reer wheel drive differential simulation rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Donny, Gasah (2008) Synthesis and characterization of Cu/Ni-zeolites -A for the direct conversion of methane to liquid hydrocarbon. Facutly of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Effizul Syafrin, Abu Bakar (2008) Labview PID speed controller for DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Emi Rahayu, Mat Noor (2008) Flood detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Engku Amalina Syazana, Ku Mohd Nazri (2008) Effect of weight percentage of silicon carbide (SiC) reinforcement particles on mechanical behavior of aluminum metal matrix composite (Al MMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Erma Yusnida, Jusoh (2008) Pelajar perlu strategi berkesan capai kejayaan. Sinar Harian . p. 21.

F. R. M., Romlay (2008) Modeling Of A Surface Contact Stress For Spur Gear Mechanism Using Static And Transient Finite Element Method. Journal of Structural Durability & Health Monitoring (SDHM), Tech Science Press, 4 (1). pp. 19-27. ISSN 1930-2983. (Published)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Machine Parameter Optimization For Wire-Electric Discharge Machining. In: International Conference on International Conference on Computational & Experimental Engineering and Sciences (ICCES 2008) , 17-21 March 2008 , Honolulu Hawaii, USA. pp. 139-144., 8 (4). ISSN 1933-2815 (online)

F. R. M., Romlay and Asmizam, Mokhtar (2008) Modeling of a Surface Contact Stress for a Gear System Using Finite Element Method. SDHM: Structural Durability & Health Monitoring, 4 (1). pp. 19-28. ISSN 1930-2983 (Print); 1930-2991 (Online). (Published)

F. R. M., Romlay and M. E., Wahab and M. I. A., Halim and M. H. M., Saad (2008) Failure Analyse Prediction of Bolts Component Using Probality Method. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 59-66. ISSN 1985-5176. (Published)

Fairul Idzwan, Mohd (2008) Comparison of agarwood essential oil & water soluble (hydrosol). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faiz, Mohd Zabri (2008) Computer based instrumentation system for temperature measurement using RTD in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Faiz Asyraf, Roslan (2008) Comparison studies of machinability for aluminium, mild steel and heat treated mild steel. Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Faizal Nazareth, Ibrahim (2008) Controller performance of P,PI and neral network control in vinyl acetate monomer process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faizarul Akmal, Jamaludin (2008) Roll forming simulation for automotive bumper fixing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faradila, Rozali (2008) The formulation of emulsions in biodiesel production : emulsion stability and demulsification via micromave heating. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Fathul Naim, Abdul Jamil (2008) Relationship between failure mechanisms with PCBN tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fauzi, Wan Jumani and Yap, Chui Yan and Nor Ashikin, Abdul Aziz (2008) Designing a pocket guidebook for interview success based on an investigation on the performance of engineering students in interviews. , [Research Report: Research Report] (Unpublished)

Fauziah, Hairan (2008) Treatment of POME via chitosan based flocculation : a study on the degree of deacetylation of chitosan. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Fazrul Amar, Ishak (2008) Development on pre-heating system for autothermal reformer for fuel cell application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Florina, Geduin (2008) Up-scale study on ultrasonically assisted of biodiesel production from waste cooking oil (WCO). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Foong, Kah Kah (2008) Formulation of chicks feed based on palm kernel cake (PKC). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fyroz Ziffa, Mohd Mustafa Kamal (2008) Simulation of electromechanical valve drive on single cylinder four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gan, Leong Ming (2008) The development of the electric energy management system for series hybrid electric vehicle. , [Research Report: Research Report] (Unpublished)

Gan, Sin Yi (2008) Mathematical modeling to predict surface roughness in milling process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Goh, Mei Fong (2008) Scale up the biopolymer (PHB) fermentation from shake flasks to 10l stirred tank fermenter. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hafierul Hafiz, Md Razi (2008) Simulation test of automotive intake valve using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafizoah, Kassim and Noor Raha, Mohd Radzuan (2008) Resolving Conflict: Enhancing Engineering Students' English Fluency through Workplace Situation. The International Journal of Learning, 14 (11). pp. 51-60. ISSN 1447-9494. (Published)

Hafnizar, Muhamad Shaharuddin (2008) Simulation of four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Haminuddin, Nurul Izzatul Ain (2008) Microcontroller based battery charger. Faculty of Electrical & Electronic Engineering, Univeirsiti Malaysia Pahang.

Hamzanee, Mat Jusoh (2008) Software development by integrating the integrated using axiomatic design-lucas design for assembly (DFA). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hani Syairah, Azman (2008) Resource planning electronic board for agriculture industry application model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Haslinda, Hashim and Muhamad Zahim, Sujod (2008) Inculcating soft skills in UMP Engineering students through `RAKSIā€™ program. In: International Conference on the Roles of the Humanities and Social Sciences in Engineering (ICoHSE 2008) , 5-6 December 2008 , Kuala Lumpur. pp. 1-16..

Hasrol Nizam, Md. Hasan (2008) Software development by integrating the integrated value engineering (VE) and boothroyd design for assembly(DFA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasrul Azmi, Said (2008) Immobilization of lipase from Candida Rugosa on chitosan beads for transesterification reaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hassan, Zulkafli Bin (2008) Zeolite NaA as an additive in enhancing the performance of absorption refrigeration system. , [Research Report: Research Report] (Unpublished)

Hassan, Zulkafli Bin (2008) An investigation of a catalytically-ignited autothermal reformer pre-heating system for hydrogen production for cell powered vehicle. , [Research Report: Research Report] (Unpublished)

Hazer, Mohamad Sayuti (2008) Temperature controlled NiCd battery charger. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .

Hazmil, Hapaz (2008) Productivity improvement through line balancing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hazrin, Azemi (2008) Monitoring of quality of essential oil from Etlingera SP. 2 (Zingiberaceae) by GC and GC-MS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Hazwan Aizat, Mohamed Hussin (2008) Study of cryogenic machining for single tip cutting tooll using new cooling system design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hegde, Gurumurthy and Murauski, Anatoli and Chigrinov, V. G. and Kwok, Hoi Sing (2008) P-156: Alignment of Ferroelectric Liquid Crystals with the Substrates Processed by Plasma-Beam. SID Symposium Digest of Technical Papers, 39 (1). pp. 1788-1791. ISSN 008-0966X/08/3903-1788. (Published)

Hegde, Gurumurthy and Yaroshchuk, Oleg and Kravchuk, Ruslan and Murauski, Anatoli and Chigrinov, V. G. and Kwok, Hoi Sing (2008) Plasma-beam Alignment Technique for Ferroelectric Liquid Crystals. Journal of the Society for Information Display, 16 (10). pp. 1075-1079. ISSN 1071-0922/08/1610-1075. (Published)

Hilmee, Mat Jusoh (2008) An investigation into effect of nitriding on fatigue life of piston. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hong, Kim Soon (2008) Effect of different type of car to tire deformation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hong, Siau Huey (2008) Enzymatic-enhanced production of gaharu oil : effects of enzyme loading and duration time. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Hudzaifah, Mohd Azam (2008) Simulation study of the plastic floor tile for two plate and three plate mold using plastic simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Husni, Basharudin (2008) Bioremediation of oil contaminated wastewater using mixed culture. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ibrahim, Iderus (2008) Artifial intelligence (AI) controller design for beam and ball system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ibrahim, Mohd Zamri and Muhammad, Badaruddin and Ramli, Mohd Syakirin and Reza Ezuan, Samin and Zuridan, Daud (2008) Development of universal qiblat finder (UQF) using digital compass and global positioning system (GPS). , [Research Report: Research Report] (Unpublished)

Ida Nuryani, Ibrahim (2008) Preparation and permeability study of polysulfone membrane for CO2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Idris, Md Yusof (2008) Application occupational safety and health in industry case study : CCM Fertilizers Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ilyas, Ishak (2008) Optimization of engine mounting bracket location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Irawan, Addie (2008) Developing of multiple motor drive module system with real-time data-acquisition channels. , [Research Report: Research Report] (Unpublished)

Iskandar Izany, A Rahman (2008) Computational stress and modal analysis of automobile tyre. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ismayuzri, Ishak (2008) Small cleaning robot for office window. Faculty Of Mechanical Engineering, Universiti Malaysia Pahang.

Jasni, Mohamad Zain (2008) Strict Authentication Watermaking with Jpeg Compression (SAW-JPEG). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 117-126. ISSN 1985-5176. (Published)

Jina, anak Muli (2008) Computer-based instrumentation system for temperature measurement using thermocouple in MATLAB application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Joannes Victor, Valentine @ Dol (2008) Treatment of POME via chitosan based flocculation : study the effect of dosage chitosan in removal oil from POME. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Johari, Ismail (2008) Design and analysis of vortex generator for a HEV model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun (2008) CFD Simulation of Aerocyclone Hydrodynamics and Performance at Extreme Temperature. Engineering Applications of Computational Fluid Mechanics, 2 (1). pp. 22-29. ISSN 1994-2060. (Published)

Julie J., Mohamed and M. M., Noor (2008) The Effects of Different Calcination Parameters on CCTO Formation. In: Proceeding of Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2008) , March 8-10 2008 , Putra Palace, Perlis, Malaysia. pp. 336-340..

K., Kadirgama and M. M., Noor (2008) Cutting Force prediction model by FEA and RSM when machining Hastelloy C-2HS with 900 holder. Journal of Scientific & Industrial Research, 6 (67). pp. 421-427. ISSN 0022-4456. (Published)

K., Kadirgama and M. M., Noor (2008) Prediction of Tool Life by Statistic Method in End-milling Operation. Scientific Research and Essay , 3 (5). pp. 180-186. ISSN 1992-2248. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and M. R. M., Rejab and N. M. Zuki, N. M. and R., Daud (2008) Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network. Jourdan Journal of Mechanical and Industrial Engineering, 2 (4). ISSN 1995-6665. (Published)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Importance of the Pre-Requisite Subject. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and N. M. Zuki, N. M. and M. S. M., Sani (2008) Design A New Household Recycle Trash Bin. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and N. M. Zuki, N. M. and M. R. M., Rejab (2008) Prediction Of Cutting Force By Numerical Solution And Statistic Method In End-Milling Operation. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

K., Kadirgama and M. M., Noor and R., Daud and M. R. M., Rejab (2008) Development of New Genetic Algorithm Software for Blow Mould Process. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

K., Kadirgama (2008) Modelling Of Tool Life When Milling Nickel Base Alloys With Two Different Coated Carbide Insert. In: SAIAS Symposium , 14-16 September 2008 , Stellenbosch, South Africa. . (Unpublished)

K., Kadirgama (2008) Prediction of Torque in Milling by Response Surface Method and Neural Network. International Journal of Modelling and Simulation, 28 (4). (Published)

K., Kadirgama and M. M., Noor and D., Ramasamy and M. R. M., Rejab (2008) Design and Simulate Mixing of Compressed Natural Gas with Air in a Mixing Device. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis, Malaysia. .

K., Kadirgama and M. M., Noor and M. M., Rahman and N. M. Zuki, N. M. and M. R. M., Rejab and B., Mohammad (2008) Design and development of blow mould using machining optimization parameters. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

Kamarul Al-Hafiz, Abdul Razak (2008) Finite element analysis of welded circular thin wall structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kamarul Ariffin, Idris (2008) Effect of ammonia / water ratio in the performance absorption chiller. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarul Azlan, Abd. Hamid (2008) Production of cellulose fiber from oil palm frond using steam explosion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kassim, Hafizoah and Ali, Zuraina and Mohd Ali, Zarina and Mohd Radzuan, Noor Raha and Khamis, Nor Yazi (2008) Developing correlation map between learning styles, reading materials and creativity. , [Research Report: Research Report] (Unpublished)

Khairi, Khalib (2008) Microcontroller based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Afif, Bakar @ Ismail (2008) Optimization of patchouli oil extraction by employing design of experiment (DOE) method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mat Salim (2008) Implementation of integral control state feedback controller for coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Anwar, Mohd Yakop (2008) Automatic pet feeder with client / server application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Azmil, Adzmi (2008) Motor speed controller using fuzzy logic method for PCB drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Azri, Ngadimen (2008) Design and development of multiuse trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khorsiah, Sabar (2008) Mercury removal using pseudomonas putida (Attc : 49128). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kogulan, AL M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kogulan, M. Saiger (2008) Guava powder production using pilot scale spray dryer and nutrient retention study. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Krishnan, Jagan Rao (2008) Development of spray dried strawberry juice powder. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Latifah, Md Yusoff (2008) Experimental analysis on drilling process of CFRP composite laminates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Leong, Nguk Foong (2008) A Study on microwave - assisted extraction of patchouli essential oil : effect of hexane as solvent. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Library, UMP (2008) 16-04-2008 Bengkel MS Online (CAI Lab KMC). [Image]

Loh, Choon Lee (2008) Effect types of coolant on tool wear and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Luqman Chuah, Abdullah and Jolius, Gimbun and Thomas, S. Y. Choong and A., Fakhru'l Razi (2008) A CFD analysis on the effect of vortex finder and cylindrical length on cyclone hydrodynamics and centrifugal forces. IEM Journal, 71 (2). pp. 51-58. ISSN 0126-513X. (Published)

M. M., Noor and K., Kadirgama and Julie J., Mohamed and M. R. M., Rejab (2008) Analysis of Connecting Rod Based on Finite Eliment Approach. In: Malaysian Technical Universities Conference on Engineering and Technology , 8-10 March 2008 , Putra Palace, Perlis, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and M. M., Rahman and M. R. M., Rejab and M. S. M., Sani (2008) Development of Auto Car Jack Using Internal Car Power. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. M., Noor and M. M., Rahman and K., Kadirgama and M. R. M., Rejab and Z., Ghazalli and M. A., Hassan (2008) Developing a Cutting Tool with Mild Steel for Printed Circuit Board. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. .

M. M., Noor and M. M., Rahman and R. A., Bakar and M. S. M., Sani (2008) An Investigation into the Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure Based on Fea. Research Journal of Applied Sciences, 3 (1). pp. 10-15. ISSN 1815-932X. (Published)

M. M., Noor and M. R. M., Rejab and K., Kadirgama and F. R. M., Romlay and R., Daud (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of the 2nd Regional Engineering Conference on Sustainable Engineering Infrastructures Development and Management , 18-19 December 2008 , Kuching, Sarawak. pp. 33-38..

M. M., Noor and R., Daud and K., Kadirgama and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of Turret Punch Cutting Tool Using Reverse Engineering Method. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Rahman and A. K., Ariffin and S. M., Beden and S., Abdullah (2008) Fatigue Life Assessment for Metallic Structure: A Case Study of Shell Structure under Variable Amplitude Loading. Journal of Applied Sciences , 8 (9). pp. 1622-1631. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and M. R. M., Rejab and M. S. M., Sani and K., Kadirgama (2008) Study Of Air Fuel Ratio On Engine Performance Of Direct Injection Hydrogen Fueled Engine. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. .

M. M., Rahman and R. A., Bakar and M. S. M., Sani and M. M., Noor (2008) Investigation Into Surface Treatment On Fatigue Life For Cylinder Block Of Linear Engine Using Frequency Response Approach. In: 15th International Congress on Sound and Vibration (ICSV 15) , 6-10 July 2008 , Daejeon, Korea. . (Unpublished)

M. M., Rahman and S., Abdullah and A. K., Ariffin and N. A., Al-Asady (2008) A Review on Finite Element Analysis Approaches in Durability Assessment of Automotive Components. Journal of Applied Sciences, 8 (12). pp. 2192-2201. ISSN 1812-5654. (Published)

M. M., Noor and A., Sulaiman and K., Kadirgama and M. R. M., Rejab and M. S. M., Sani and F. R. M., Romlay and R., Daud and Z., Ghazalli and D., Ramasamy and M. F., Ghazali and W. S., Wan Harun and M. Y., Taib (2008) Simulation of the Corrosion Point and Repairing Technique at the Crane with Finite Element Analysis. In: Proceedings of EnCon2008: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , 18-19mDecember 2008 , Kuching, Sarawak, Malaysia. pp. 1-6..

M. M., Noor and K., Kadirgama and D., Ramasamy and M. R. M., Rejab and N. M. Zuki, N. M. (2008) Development of A High Pressure Compressed Natural Gas Mixer for A 1.5 Litre CNG-Diesel Dual Engine. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

M. M., Noor and K., Kadirgama and D., Ramasamy and M. S. M., Sani (2008) CFD Simulation And Validation Of The In-Cylinder Within A Motored Two Stroke Si Engine. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

M. M., Rahman and M. M., Noor and A. K., Ariffin and Ummu Kulthum, Jamaludin and S., Abdullah (2008) Finite Element Based Fatigue Life Prediction of a New Free Piston Engine Mounting. Journal of Applied Sciences , 9 (8). pp. 1612-1621. ISSN 1812-5654. (Published)

M. M., Rahman and M. M., Noor and R. A., Bakar and M. A., Maleque and A. K., Ariffin (2008) Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach. Journal of Applied Sciences , 8 (19). pp. 3316-3327. ISSN 1812-5654. (Published)

M. M., Rahman and R. A., Bakar (2008) Assessment of Fatigue Life Behaviour of Cylinder Block for Free Piston Engine Using Frequency Response Approach. Research Journal of Applied Sciences, 3 (1). pp. 32-34. ISSN 1815-932X. (Published)

M. M., Rahman and R. A., Bakar and A. K., Ariffin and Ummu Kulthum, Jamaludin and C. H. C., Haron (2008) Fatigue Life Prediction of Two-Stroke Free Piston Engine Mounting Using Frequency Response Approach. European Journal of Scientific Research, 22 (4). pp. 480-493. ISSN ISSN 1450-216X. (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and M. R. M., Rejab and M. S. M., Sani (2008) Fatigue Life Prediction of Spot-Welded Structures: A Finite Element Analysis Approach. European Journal of Scientific Research, 22 (3). pp. 444-456. ISSN ISSN 1450-216X. (Published)

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Focus on Gambang. Eureka!, 1 (1). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Nanotechnology - the next wave. Eureka!, 1 (1). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Natural products R&D at UMP. Eureka!, 1 (1). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Pahang state exco passes biodiversity biotechnology strategic action plan! Eureka!, 1 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Spotlight: research grants and publication. Eureka!, 1 (1). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Mohamad Najib, Mohammad Nor (2008) Vice-Chancellor visits laboratories. Eureka!, 1 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Muhammad Najib, Muhammad Nor (2008) Past Master Series: Jaber ibn Hayyan. Eureka!, 1 (1). p. 3. ISSN 1985-8248

M. R. M., Rejab and K., Kadirgama and M. M., Noor and M. S. M., Sani (2008) Modification And Testing Of Four Axes Filament Winding Machine. In: Proceeding of International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 December 2008 , UiTM, Penang. .

M. R. M., Rejab and M. M., Rahman and K., Kadirgama and M. M., Noor (2008) Effect of Multiaxial Testing on Polymeric Foams Performance for Shear-Compressive Loading. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19 , Kuching Sarawak, Malaysia. .

M. R. M., Rejab and M. M., Rahman and M. M., Noor and A. N. M., Rose (2008) An Investigation into the Effects of Fibre Volume Fraction on GFRP Plate. In: Malaysian Technical Universities Conference on Engineering and Technology , March 8-10, 2008 , Putra Palace, Perlis. .

M. R. M., Rejab and N. M. Zuki, N. M. and M. M., Noor (2008) Strain Rate Effects of Polymeric Foam Cores Under Compressive Loading. In: Proceeding of Science, Technology and Social Science Conference (STSS) . pp. 267-275..

M. S. M., Sani and Che Ku Eddy Nizwan, Che Ku Husin and M. M., Noor (2008) Experimental Heat Transfer Study On The Shock Absorber Operation. In: International Conference on Science & Technology: Applications in Industry & Education (2008) , 12-13 Dec 2008 , UiTM, Penang Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Noor and M. R. M., Rejab and A. S., Sulaiman (2008) Assessment of The Mechanical Engineering Programs by Exit Surveys at Universiti Malaysia Pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and K., Kadirgama and G. L., Ming (2008) Dynamic Correlation Technique and Model Updating on Go Kart Chassis Structure. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management , December 18 -19, 2008 , Kuching, Sarawak.. . (Unpublished)

M. S. M., Sani and M. M., Rahman and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) Study on Dynamic Characteristics of Automotive Shock Absorber System. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Malaysia . . (Unpublished)

M. S. M., Sani and M. M., Rahman and Zamzuri, Hamedon and M. M., Noor and M. R. M., Rejab and K., Kadirgama (2008) An Evaluation of Profiles for Disk Cams with In-line Roller Followers. In: Malaysian Science and Technology Congress, MSTC08 , 16-17 Dec 2008 , KLCC, Kuala Lumpur. . (Unpublished)

M. S. M., Sani and M. M., Zainudin (2008) Dynamic Measurement System for Interchangeable Shock Absorber Test Rig. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 67-74. ISSN 1985-5176. (Published)

M. S. M., Sani and N., Nubra (2008) Application of Dynamics Modal Testing Fun Kart Chassis. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 1-11. ISSN 1985-5176. (Published)

M. Z., Ibrahim and Marzuki, Khalid and Rubiyah, Yusof (2008) Automatic Speaker Recognition System Using Fuzzy C-Means Artificial Neural Networks. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 93-108. ISSN 1985-5176. (Published)

Mackenzie, Banyeng (2008) Treatment of POME via chitosan based flocculation : a studies of agitation speed and oil concentration in POME. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mahmad Tabib, Mahmad Tajudin (2008) Smart system of ultrasonic car parking. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Maizatul Mastura, Muhammad Nazri (2008) Design and fabricate of a motorized cutter for mechanical part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mas Ayu, Hassan (2008) Surface Integrity Study In WEDM Of Tungsten Carbide. Solid State Science and Technology, 16 (1). pp. 1-11. ISSN 0128-7389. (Published)

Mas Ayu, Hassan (2008) Wire Electrical Discharge Machining of Tungsten Carbide. In: Malaysian Science And Technology Congress 2008 (MSTC 2008) , 16 ā€“ 17 December 2008 , Kuala Lumpur Convention Centre. . (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud (2008) Design and Analysis for the Improvement of Electric Kettle Performance. In: National Conference of Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Universiti Teknikal Malaysia Melaka. . (Unpublished)

Mas Ayu, Hassan and Rosdi, Daud and Siti Haryani, Tomadi (2008) Study Of The Surface Integrity Of The Machined Workpiece In The Wedm Of Tungsten Carbide. In: Malaysian Metallurgical Conference ā€“ MMC 2008 , 3-4 December 2008 , UKM, Bangi Selangor. . (Unpublished)

Mazlina, Abdul Majid and Aickelin, Uwe and Siebers, Peer-Olaf (2008) Modelling and Analysing Human Behaviour in a Department Store using Discrete Event and Agent Based Simulation. In: Annual Operational Research Conference 50 (OR 50) , 9-11 September 2008 , York, UK. . (Unpublished)

Mirzan Aidif, Mohd Shakhir (2008) Implementation of quality tools in small medium industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Al Rassid, Mohamad Borhanudin (2008) Two dimensional car body visualization using air flow bench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Azizi, Omar (2008) PC based DC motor speed control. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Hafizul Hisyam, Yahya (2008) Characterization and modeling of static recovery process of brass (Copper Zinc) alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izzat, Mohamad Yuden (2008) Improvement of office chair for ergonomics purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izzuddin, Yakari (2008) Oil Palm Frond (OPF) as an alternative source of pulp and paper production materials. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Khairul Hadi, Che Mohamad Khalib (2008) Survey on carbon dioxide emission from internal combustion engines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Naim, Yusoff (2008) Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Nazri, Semoin (2008) Optimization of turning parameters using ant colony optimization. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Mohamed Rodzi (2008) Home automation using X-10 technology. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Ruslan (2008) Failure analysis of input shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Ruslan (2008) Failure analysis of input shaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Ruzaini, Mohamed Ibrahim (2008) Portable and foldable wet clothes hanger. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saufi, Mohamad Zainury (2008) Modal analysis for engine crankshaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Syafiq, Mohd Nazaruddin (2008) Development and prototyping of a takraw ball feeder for accuracy training based system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Syahmi, Shahrom (2008) Development of potato peeling machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Tarmizi, Arbain (2008) Computational stress and modal analysis of car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zafarudin, Mohamad (2008) Estimation of vinyl acetate monomer concentration using neural network & partial least square. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamed Faizan, Basheer Ahmad (2008) Obstacle avoidance legged robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamed Farid, Mohamed Faruq (2008) PID controller design for DC motor using matlab application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamed Sallehsu, Kamaruzaman (2008) Process capability analysis at Chaudry textiles (Malaysia) Sdn Bhd. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Afifi Faiz, Azha @ Azahar (2008) Development of the modified zeolite -A catalyst for the direct conversion of methane too liquid hydrocarbons. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Afnan, Mohammad Kamarizaman (2008) Development of apple peeler machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Faizal, Mohamad Ehsan (2008) Parking motoring system with security system features. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Firdaus, Shamsudin (2008) Study and applications of a pneumatic acceletator for variety speed of punching. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Hadi, Ismail (2008) Rain-water PLC based detector and valve switcher. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Iskandar, Othman (2008) Design and build a turbochanger stand and airflow circuit piping for an automotive turbochanger testing apparatus. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Abd Latif, Abd Ghani (2008) Effect of surface roughness using different electrodes on electrical discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adam, Mohd Noor (2008) Simulation of the supersonic jet length for KT oxygen lance with 22 mm diameter and 2:1 ratio of NG: O2 at electric arc furnace. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Adib, Alias (2008) Study of sequential multipoint injection nozzle effect of compressed natural gas engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adid, Abu Musa (2008) Development of smart egg incubator system for various types of egg (seis). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Adzwan, Md. Nor (2008) Optimization of cooling channel parameters for designing three plate mould of hexagonal floor tile using Taguchi method to reduce warpage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Afiq, Mat Noor (2008) Implementation of PID controller on prasmatic control of universal stretch and bending machine (USBM) simplified model. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Afiq, Mohd Salleh (2008) Functional group characterisation and comparative study of natural herbs extraction oil aleurites moluccana, cinnamon zeylinicum, myristica fragrans, piper nigrum with zea mays, and elaeis guineensis jacq. oil. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Aidil, Zaini (2008) The study on the performance of the gas turbine for power generation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Md Johari (2008) Investigating of mechanical properties of reinforced plastics (fiberglass). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman Shah, Abdullah (2008) Carbon Dioxide (CO2) laser cut quality of acrylic with different power levels. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizad, Kamarol (2008) Characterisation and modelling of static recovery process of stainless steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizat Faiz, Mohd Yazid (2008) Computer-based instrumentation for pressure instrument using visual basic application. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Mohd Aizuddin, Abu Bakar (2008) Development of a PID controller for DC motor using Microsoft Visual Basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Akram, Che Omar (2008) Taguchi method in determining the optimum spot welding parameters for automotive component. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Alfaduly, Mohamad Saleh (2008) The study of impact response of composite material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ali Amri, Muhammad Hassan (2008) Design and fabrication of easy assemble tricycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amir, Zaini Naziff (2008) Design and fabrication of portable notebook table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amiruzamin, Mohd Shaufi (2008) Optimization of process parameters in sheet metal formng by using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Anwar, Zawawi (2008) Active suspension system design for railway vehicles transporting sensitive goods and hazardous materials. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Arif, Mohd Ariffin (2008) Design and fabricate a speed reducer gearbox. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Arif, Mokti (2008) A surface roughness prediction model for laser beam cutting (LBC) on acrylic sheets. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ashraf, Ahmad (2008) Dynamic Modelling of a Two-link Flexible Manipulator System Incorporating Payload. In: 3rd IEEE Conference on Industrial Electronics and Applications, 2008. ICIEA 2008 , 3-5 June 2008 , Singapore. 96 -101 ..

Mohd Asqalani, Naharudin (2008) Design and simulation automobile active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azam, Muhammad Akhir and Mohd Ali, Zarina and Ahmad Fazullah, Mohd Zainal Abidin and Abdul Rani, Anita and Ramle, Abid and Nor Suhardiliana, Sahar (2008) Development of teamrole inventory for co-curriculum subjects. , [Research Report: Research Report] (Unpublished)

Mohd Azhar, Azmi (2008) PI controller for battery charger system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Azim, Abdul Rahman (2008) Partial purification of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. TS1-1. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azimie, Ahmad (2008) Batch ethanol fermentation using glucose derived from tapioca flour starch by Saccharomyces Cerevisiae for effect of temperature and agitation rate. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Azizi, Junit (2008) Characterisation and modelling of static recovery process of aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azizul, Ghafur Rahimi (2008) Temperature monitoring system. Fakulti Kejuruteraan Elektrik Dan Elektronik , Universiti Malaysia Pahang.

Mohd Azlan, Mat Ali (2008) Monitoring of quallity of essential oil from Etlingera SP.5 (Zingeberaceae) by GC/MS &GC - FID. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Azmi, Md Juni (2008) Surface roughness optimization of face milling operation using Taguchi design method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azrul Aminur, Ismail (2008) Relationship between electrode size and machined surface in the EDM machining process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azzuan, Abd Aziz (2008) Power system analysis educational toolbox using Matlab 7.1. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Effi, Mohjee (2008) Design and fabricate sieve machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhil, Rani (2008) Design and fabrication of firing test rig for two-stroke spark ignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadil, Md Sairi (2008) Application of genetic algorithm methods to optimize flowshop sequencing problem. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faisal, Che Yusof (2008) Benchmarking on management system in manufacturing companies in establishing maintenance awareness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faiz Muaz, Ahmad Zamri (2008) The study of corrosion rate for carbon steel pipe in alkaline concrete solution. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Jasni (2008) Design and fabrication of ceiling fan blades cleaner. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Faizal, Mohd Pauzi (2008) Design of two stroke SI linear engine with spring mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakhri Azizi, Jusoh (2008) Design of a new concept of recycle trash bin. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakrul Radzi, Mohd Mawardzi (2008) Design, fabrication and optimization of shear test rig (double shear type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farid, Ishak (2008) Isolation, characterization and identification of microbes in biofertilizer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fauzani, Mohd Nawi (2008) CFD simulation and validation of the in-cylinder within a motored two-stroked SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fauzie, Ramli (2008) Thermal analysis of vehicle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fikri Azri, Mat Saad (2008) Design and development of motored engine for two-stroke spark ignition (SI) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Daud (2008) Testing statcom model in IEEE power system network using PSCAD software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mahyidin (2008) Student attendance using RFID system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mansor (2008) Design and prototyping a peristaltic pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Mohd Firdaus Naqiuddin, Che Pa (2008) Exhaust port flow study on various cylinder head using flowbench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdhaus, Samah (2008) Digital rain gauge. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Fitri, Mohd Sariff (2008) Solar powered warning street lamp. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Ghadafi, Ismail (2008) Biodiesel production from waste cooking oil via single steps tranesterification process with the aid of sodium methoxide as a catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Hasbullah (2008) Computer based instrumentation for level measurement using visual basic application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Mohd Nor (2008) Design and fabricate a systematic dish rack drainer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizan, Mamat (2008) Improvement of rear bumper design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hairilbasyar, Mohamad (2008) Design and development of the mechanical part of durian opener. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hairul Nizam, Mohamed (2008) Investigation of aluminum cooling coil in condenser application using computational fluid dynamic (CFD). Faculty Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hakim, Omar (2008) The flexural behavior of composite sandwich structure. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Mokhtar (2008) Design and and analysis of platform motorcycle dynamometer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hanis, Jaludin (2008) Expert domestic wiring simulation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hapiz, Arbain (2008) Battery charger with alphanumeric LCD module monitoring. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Harris, Abdul Aziz (2008) Design and fabrication of foldable magazine rack. Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Hazwan, Kamarudin (2008) Characterisation and modelling of static recovery process of plain carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Helmi, Samta (2008) Control rectifier for variable speed single phase DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hilman, Sobhi (2008) Scrap reduction study for automotive stamping. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hisyammudin, Muda (2008) Development of semi-automatic solar gate system for electromechanical part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hosni, Ismail (2008) Characterisation and modelling of static recovery process of Aluminium-copper alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Iqbal, Mohd Zolkepeli (2008) Failure analysis on the drillpipe due to the twist-off. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Isa, Nur Iznie Afrah (2008) DC Motor Controller Using Linear Quadratic Regulator (LQR) Algorithm Implementation on PIC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Iszuani, Mohd Hassan (2008) Asas Bahasa Jepun 1 = Kihonteki Na Nihongo 1. Penerbit Universiti Malaysia Pahang, Universiti Malaysia Pahang. ISBN 9789675080180

Mohd Izulradhi, Mohd Napis (2008) Development of a mechanical fruit picker. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Dzolkafle (2008) Implementation of PID controller for controlling the liquid level of the coupled tank system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Siswo (2008) Removal of ferrum from aques solution by using dried water hyacinth (Eichhornia crassipes). Faculty of Chemical and Natural Resources Engineering Technology, Universiti Malaysia Pahang.

Mohd Izzat Faliqfarhan, Baharom (2008) Simulation test of automotive alloy wheel using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Anuar, Mohd Idris (2008) Effects of machining characteristics on electric discharge machine using different electrode materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Jeffridin, Daud (2008) Effective air extraction system and safe protection for welding bay in institution of higher learning. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairul Nizam, Mohd Zuhan (2008) Bioremediation of oil from domestic wastewater using mixed culture : effects of inoculum concentration and agitation speed. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Khairul Zaman, Muhamad Zin (2008) Fatigue life prediction of cylinder head for two stroke engine using constant and variable amplitude loading. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Mohd Khalis Aizat, Abd Aziz (2008) Development of auxiliary equipment for 1 seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Munzir, Hamzah (2008) The production of ecofiber from palm oil empty fruit bunch (EFB). Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Nadzrizal, Mohamad Ghaazali (2008) Development design of a mini satay skewering machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Najmi, Mohamad (2008) Body assembly process improvement for automotive industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nashriq, Mohd Hanafiah (2008) Design and development of disk valve exhaust port for four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nashriq, Nasharudin (2008) Patchoili oil extraction using ultrasonic extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nasrul, Yaakop (2008) Preparation of biodiesel from RBD palm oil via single step transesterification process with the aid of ultrasonic irradiation and (NaOh) as catalyst. Faculty of Chemical and Natural Resources Engineering , University Malaysia Pahang .

Mohd Nazirul Mubin, Mohammad Zaki (2008) Aerodynamics optimization of rear car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nizam, Mohd Nor (2008) Development and prototyping an automatic fish feeder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nizam, Zakariya (2008) Isolation of xylan degrading microorganism from local hot spring. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Mohd Noor, Zamri (2008) Wall avoiding robot. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Noor Syazwan, Ab. Patar (2008) Portable and easy to use chair. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Firdaus, Mohd Salleh (2008) Studying the effect of mixing miscible hydrocarbon components on the multi-stage distillation operation compared with single component distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Nor Idrus, Mat Shariff (2008) Automatic air conditioning control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nordin, Zazalli (2008) Prediction studies for the performance of a single cylinder high speed SI linear engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Pidaus, Mustafa (2008) Safety health and environment in University Malaysia Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qayyuum, Mohd Ridzuan (2008) Design and fabricate of new pelton wheel blade. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Rozihad (2008) Ultrasonically-assisted production of biodiesel from waste cooking oil (WCO). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Mohd Rasol (2008) Solar home automation system (electro-mechanical part). Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Mohd Rafa'at, Mohd Ibrahim (2008) A study of the spot welding time on joining strength of the mild steel plates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Raz Firdaus, Ramli (2008) Design and fabrication of golf ball picker. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Razuan, Mohamed Said (2008) Development of a universal serial bus hub with protection circuits. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohd Redha, Rajab (2008) Linear quadratic regulator (LQR) controller design for DC motor speed using matlab application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Redza, Abdul Razak (2008) Tool to determine vehicle ground lines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ridhwan, Md Deros (2008) Production and characterization of extraction oil from natural spices : a comparison study with functional group content of Zea May and Elaeis Guineensis jacq. oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ridzuan, Nordin and Lee, Mei Ph'ng and Setyo Budi, Agus and Zulkapli, Buang and Norizan, Md Nor and Hassan Nazri, Khalid (2008) University-Community Engagement in Malaysia: Practices and Prospects. In: Enhancing the Quality of Higher Education Through Research: Shaping Future Policy. The Ministry of Higher Education, Malaysia, Kuala Lumpur, pp. 66-91. ISBN 978-983-3663-11-8

Mohd Ridzwan, Ramli (2008) Solar home automation system (mechanical part). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rizal Hilmie, Abd Rahman (2008) Analysis of disk cam motion for follower shape in vertical position. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rubaee, Munajah (2008) Microcontroller Based Boost PID. Faculty of Electrical& Electronic Engineering, Universiti Malaysia Pahang.

Mohd Ruzaimi, Mat Rejab and Muhamad, Mat Noor and Rahman, Md Mustafizur and Kadirgama, Kumaran and Mohd Shahrir Mohd, Sani and Ahmad Nasser, Mohd Rose and Rosli, Abu Bakar and Ahmad Syahrizan, Sulaiman (2008) Implementation of outcome based education in the faculty of mechanical engineering, universiti malaysia pahang : An experience. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

Mohd Sahril, Mohd Fouzi (2008) Model updating for fun kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Saifol, Ishak (2008) Determination of explosion parameters of LPG-air mixtures in the closed vessel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Saupi, Mohd Sauki (2008) Optimization of milling parameters using ant colony optimization. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shafarin, Haruddin (2008) Small scale wind turbine (synchronous generators). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahizan, Shapii (2008) Implementation of LQR controller on coupled tank liquid level system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Shahli, Mohd Sidek (2008) Study on the concentration of isooctane from oleic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Shahrel, Baharudin (2008) Lead and cadmium removal in synthetic wastewater using constructed wetland. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Shahrul Azmi, Mohd Akhir (2008) Study of compresses natural gas (CNG) engine using intake valve swirl. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shakirun Naim, Md Isa (2008) PC based SMPS protection. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Sharizan, Md Sarip (2008) Model predictive control of vaporizer in vinyl acetate monomer process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Sobri, Husain (2008) Analysis of disk cam motion for follower shape in horizontal position. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Suhaimi, Mustapar (2008) Applying design for 3R and design for disassembly method to determine the end-of-life stage of the bicycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sukairi, Mas Hassan (2008) Batch ethanol fermentation using glucose desired from tapioca flour starch by Saccharomyces cerevisiea effect of inoculum age and agitation speed. Faculty of Chemical Engineering and Natural Resource , University Malaysia Pahang .

Mohd Syafiq, Mohd Fuad (2008) Development of the computer-aided diagram (CAD) for electrical machine for undergraduate purpose learning. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Syafiq, Salim (2008) Effect of alkaline-catalyzed in homogeneous reaction of biodiesel production from waste cooking oils using ultrasonic bath-cleaner. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syazrin, Sopnan (2008) Design and analysis rear diffuser for HEV model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufik, Ab Rahman (2008) Buck-boost power LED driver using PIC microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Abd Kadir (2008) Intake port flow study on various cylinder head using flowbench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd U'Kasyah, Hashim (2008) Design and fabricate portable tower for TV arial. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ubaidallah, Abd Rashid (2008) Supply chain management for manufacturing industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Warid, Hussin and Khairunisa, Muthusamy and Fadhadli, Zakaria (2008) Performances of Palm Oil Fuel Ash Cement Based Aerated Concrete in Acidic and Sulphate Environments. In: Proceedings of the 11DBMC Conference on Durability of Building Materials and Components , 11-14 May 2008 , Istanbul Technical University, Turkey. pp. 1-8.. ISSN 978-975-561-325-3

Mohd Yusnizam, Yusof (2008) Effects of ph in mercury nitrate treatment using membrane system with biological pretreatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Yusrizal, Mohd Ali (2008) Carbon dioxide (CO2) laser cut quality using different feed rate and constant power level. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaeed, Mohd Zin (2008) Design and fabricate measuring starting block. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaim, Din (2008) Experimental study on strength of spot welded. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaini, Jamak (2008) Development of production sequencing software for industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zaky, Zainuddin (2008) MTDC bantu komersialkan penyelidikan tempatan. Sinar Harian . p. 2.

Mohd Zulhilmi, Wan Salleh (2008) Isolation of alkalophilic microorganism from local hot spring. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Zulkifli Azizan, Sinnappan (2008) UMP version LED bulb. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd khairul, Ya'kub (2008) Modelling of the supersonic jet length for KT oxygen lance with 15 cm diameter and 1:1 ratio of O2: NG at electric arc furnace using computational fluid dynamics (CFD). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd. Solahuddin, Abdullah (2008) Cost comparison studies of fisherman boat for wood and fiberglass material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohs Azri, Abd Mutalib (2008) Speed control of DC motor using PI controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang .

Mughirah, Abdullah (2008) Biodiesel fuel from waste cooking oil & RBD palm oil via transesterification reaction with the aid of sodium methoxide, methanol, and ultrasonic reactor. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad, Mat Noor and Kadirgama, Kumaran and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Md Mustafizur, Rahman and Ahmad Syahrizan, Sulaiman (2008) Quality management system in implementation of outcome based education at faculty of mechanical engineering, universiti malaysia pahang. In: 4th International Conference on University Learning and Teaching (InCULT08), , 20-21 October 2008 , Concorde Hotel, Shah Alam Malaysia. . (Unpublished)

Muhamad Akmal, Ishak (2008) Computer-based instrumentation system for temperature measurement using thermocouple in visual basic application (C.I.S.T.V.A.). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Azizan, Mat Sirat (2008) Microcontroller base full bridge forward power supply unit. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .

Muhamad Firdaus, Mahmud (2008) Improvement of front car bumper system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Kahfi, Abdullah (2008) Extraction of gaharu oil using enzymatic hydrodistillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Kharulnizam, Mohd Yusop (2008) Development of clothes dryer machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khumaini, Kuzaiman (2008) Analyze the sprinkler system in UMP lecture room using CFD (Computational Fluid Dynamics) analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Zuhairi, Sulaiman (2008) Simulations Of Two Bubbles Rise In Cavity With Lattice Boltzmann Method. In: International Graduate on Engineering and Science (IGCES'08) Mechanical Engineering , 23-24 December , Universiti Teknologi Malaysia, Skudai - Johor. .

Muhamad Zuhairi, Sulaiman (2008) Laminar Flow Through A Double Elbow Geometry With Lattice Boltzmann Numerical Method. In: International Graduate on Engineering and Science (IGCES'08) Mechanical Engineering , 23-24 December 2008 , Universiti Teknologi Malaysia, Skudai - Johor. . (Unpublished)

Muhamad khuzaifah, Mustakim (2008) Patchouli oil extraction by using hydro distillation (lab scale). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad, Mazlan (2008) Path follower mobile robot using PID controller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Muhammad, Shahrin Suhaimi (2008) Development of attachment for customized steering rack on one seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq, Ahmad Mustaza (2008) Design and fabricate storage cabinet for turret punch tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Al Firdausi, Johari (2008) Design optimization of cutting parameters for truning operation based on Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Aminuddin, Abd Rahman (2008) Application of fluent tp predict combustion performance for pure propane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Asyraf, Abd Talib (2008) A study of surface crack behaviour using heat treatment on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ezra-Ezwan, Mat Aris (2008) Speed control of DC motor using PID controller implementation with PLC. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Fakhrul, Hashim (2008) Development of foldable and portable goalpost for street soccer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Farid, M Fathil (2008) Painting process improvement for automotive industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hafiz, Abdul Latip (2008) Design and fabrication of portable kitchen for outdoor use. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Haikal, Haron (2008) Finite element analysis of automotive intake manifold using CAE software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hanif, Abd Rasid (2008) Noise source identification of split unit air conditioner system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hasbullah, Rais (2008) Computer-based instrumentation system for temperature measurement using RTD in visual basic application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Ibrahim, Md Nujid (2008) Develop and design shematic diagram and mechanism on one seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Khazrattul, Bani (2008) Design anf development of small DC refrigerator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Muhibbudeen, Mohd Som (2008) Application quality function deployment (QFD) in small medium enterprise (SME). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Qaidir, Abdillah (2008) Design and fabrication of multi purpose ladder. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safwan, Zakaria (2008) Development of incremental forming machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saifuddin, Idris (2008) Extraction of essential oils from jasmine flower using solvent extraction based on petal condition. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Norashid (2008) 16 bits x 16 bits booth multiplier using VHDL. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Thaqib, Kamaruzzaman (2008) Ergonomic job redesign for multitask packaging work by using revised NIOSH lifting equation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaki, Zainal (2008) Simulation test of automotive constant velocity joint (CVJ) using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zamri, Azmi (2008) Design and fabricate multipurpose desk for student. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulfadli, Che Zakaria (2008) Design and fabricate multipurpose portable desk. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhd Bashori, Abu Bakar (2008) Production of bioethanol from tapioca starch using saccharomyces serevisiae : effect of inoculum concentration and temperature. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhd Ridzwan, Muhamad Jamil (2008) Design and fabricate the prototype of a motorized cutter for harvesting palm fruit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhd Zahiruddin, Shukor (2008) Extraction of essential oils from patchouli leaves using ultrasonic - assisted solvent extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muna Suhaili, Zakaria (2008) Production of bioethanol from tapioca starch using Saccharomyces cerevisiae : effects of pH and air flow rate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and K., Kadirgama and M. R. M., Rejab (2008) An Investigation into the Effect of Materials on Joining for Automotive Panel Using Tailor Welded Blanks. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur. pp. 22-26..

N. M. Zuki, N. M. and M. M., Rahman and M. M., Noor and M., Hafizuddin (2008) Regenerative Chatter in End Milling on Mould Aluminum Alloys. In: Proceeding of 7th UMT International Symposium on Sustainability Science and Management (UMTAS) 2008 , 8-10 June 2008 , Kuala Terengganu. .

Nabil Fikri, Yaakub (2008) Production of grease from used lubricant : A feasibility study. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nabilah, Harmain (2008) Design and fabricate the portable and adjustable dining chair for child. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabilah Izzati, Mohd Nordin (2008) Effect of volume fraction on the flextural strength and modulud of woven composite. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabillah, Saleh (2008) Child monitoring system (Parent). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nadiah Waznah, Zabidi (2008) Experimental determination of convective heat transfer coefficient in wire electro discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nadiathul Raihana, Ismail (2008) PV module maximum power point tracker (MPPT) using microcontroller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nadirah, Ismail (2008) Development of a motorized cutter (electro-mechanical part) and integration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nafsiah, Hussain and Rosmerah, Liaw and Goh, Mei Fong and Azrina, Mat Isa and Jailani, Salihon (2008) Optimisation and scale-up of production of biodegradable polymer in stirred tank fermentation. , [Research Report: Research Report] (Unpublished)

Nafsiah , Hussain (2008) Factor analysis of fermentation for the production of biopolymer in shake-flasks. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Najwa, Mohd Nor (2008) Preparation of biodiesel from waste cooking oil using single step batch catalyst with the aid of KOH as a catalyst. Faculty of Chemical & Natural resources Engineering, Universiti Malaysia Pahang.

Nasrung, Nurba (2008) Bus monioring system (hardware part). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nazariha, Mat Salleh (2008) GUI development for DC motor application in MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nazrith, Zulkafli (2008) Design and development of mechanical rabbit cage. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ng, Wei Kuen (2008) Studying the effect of using some additives on changing azeotropic behavior in distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Mohamad Anis, Nik Haron (2008) Design of a microcontroller-based passive standby uninterruptible power suply (UPS). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nik Mohamed, Nik Mohd Zuki and Noor, M. M. and Rose, Ahmad Nasser Mohd and Razali, Noraini Mohd and Daud, Rosdi and Shalahim, N. S M and Ahmad, Syarifah Nur Aqida Syed (2008) Development of laser cutting and engraving machine utilising PC-NC controller. , [Research Report: Research Report] (Unpublished)

Nik Mohd. Farhan, Abd Wahab (2008) Implementation of integral control state feedback controller on prasmatic control of universal strech and bending machine (USBM) simplified model. Faculty of Electric & Electronics , Universiti Malaysia Pahang.

Noor, M. M. and Rahman, M. M. and Sani, M. S.M. and Julie Juliewatty, Mohammed and Nik Mohamed, Nik Mohd Zuki and Rose, Ahmad Nasser Mohd (2008) Numerical study on fatigue life of spot welded for automotive components. , [Research Report: Research Report] (Unpublished)

Noor Ain, Mohd Badruddin (2008) Removal of phosphorus by microflora in drain. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Din, Ummi Kalsom (2008) Alarm System Using Body Detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noor Raha, Mohd Radzuan and Fatimah, Ali and Hafizoah, Kassim and Haslinda, Hashim and Najah, Osman and Ramle, Abid (2008) Developing speaking skills module for engineering students. The International Journal of Learning, 14 (11). pp. 61-70. ISSN 1447-9494. (Published)

Noor Zanida, Zamani (2008) Screening of lignin degrader from soil. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Noor Zariyati, Mohammad (2008) Concentration of biopetrol from palmitic acid. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noorsakinah, Shafie (2008) Simulation development, design and test of handset casing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Asiah, Johan (2008) Formulation of multivariate chart for air mass density. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Azinee, Said (2008) Effect of nitriding on fatigue life of the cylinder block for two-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Azlina, Alias and Thamer Ahmed, Mohamed and Abdul Halim, Ghazali and Megat Johari, Megat Mohd. Noor (2008) Impact of Takeoff Angle of Bucket Type Energy Dissipater on Scour Hole. American Journal of Applied Sciences, 5 (2). pp. 117-121. ISSN 1546-9239 (print), 1554-3641 (online). (Published)

Nor Hidawati, Elias (2008) Bioremediation of cadmium using microbe. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Ilia Anisa, Aris (2008) Study on pretrreatment of gaharu oil extraction process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nor Komariah, Hasfa (2008) Prediction of chatter in CNC machining based on dynamic cutting force for ball end milling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Robaini, Ibrahim (2008) Encryption using FPGA. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nor Syazwani, Sukri (2008) A precut column design and control using ASPEN. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norafliza, Zainol (2008) Extraction of patchouli oil using hydro distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norahida, Ibrahim (2008) Computer methods in electrical power distribution for petronas gas industrial plant. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norasiha, Hamid (2008) Removal of nickel by using microflora in drain. Faculty of Chemical Engineering and Natural Resource , University Malaysia Pahang.

Norasyikin, Julis (2008) Implementation of PID controller on revolute control of universal strech and bending machine (USBM) simplified model. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Norazianti, Kaharudin (2008) LCD graphic monitoring for energy saving control application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norazlan, Hashim (2008) Study on combustion characteristics of different compositions of LPG. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norazlina, Ab. Rahman (2008) Neural network controller for DC motor using MATLAB application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norhaida, Mohamad Noor (2008) Optimization drilling process of glass fiber reinforced plastics. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Norhaslin, Hashim (2008) Removal of nickel from aqueous solution by using dried water hyacinth (Eichhornia crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norhayanie, Roslan (2008) Energy saving control system application in lecture hall. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Norhayati, Abd Raub (2008) Purification clove oil via typical batch distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noriedah, Sofian (2008) Treatment of POME via chitosan based flocculation : a study on variable ph and temperature. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Normawati, Mansor (2008) Cutting tool angle of lathe machine for different materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsyuhada, Taib (2008) Study on impact of six sigma in Malaysia Manufacturer electric and electronic companies. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nour, A. H. and R. M., Yunus and Zulkifly, Jemaat (2008) Demulsificaton (Breaking) Of Water-In-Crude Oil Emulsion via Microwave Heating Technology. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 37-46. ISSN 1985-5176. (Published)

Nur Adilah, Ahmad (2008) Development of stainless steel trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Azliza, Ali (2008) Fuzzy logic controller for controlling DC motor speed using MATLAB applications. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Farhana, Mustaffa (2008) Design improvement of the assembility and disassembility of integrated table, rack and wardrobe (TRW). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Khuzairy, Jamaludin (2008) Solat tracking system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Munirah, Mohd Din (2008) Graphical user interface (GUI) development for energy saving control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Sharlinawati, Md. Said (2008) Separation of lysozyme using ultrafiltration membrane, effect of ph and ionic strength on flux and rejection. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurain, Mansor (2008) Fabrication of chitosan and poly (vinyl alcohol) blend membranes with different concentration of chitosan. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurdiyana, Abu Bakar Sidik (2008) Comparison of gaharu (Aquilaria Malaccensis) essential oil composition between each country. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuripaizail, Ahmad (2008) Microcontroller based variable gate voltage for MOSFET. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurlaila, Haman (2008) Currency recognition and converter system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nurliyana, Mohd Johari (2008) Computer based instrumentation system for pressure measurement in matlab application. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Nurmaliza, Md Ali (2008) Multiuse expert electrical calculator system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Farha, Abdul Rashid (2008) Biodiesel production via single - step alkali catalyst in batch process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Hakeem, Abd Rahim (2008) Development of image processing software using visual basic 6.0. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Hidayah, Razak (2008) Process capability analysis in manufacturing titanium dioxide. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Izyan, Ahmad Tarmizi (2008) Remote process control and monitoring by using TCP/IP. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Izzati, Pandak Jabo (2008) Speed control of DC motor using PID controller implementation with visual basic. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Shamsinar, Shahirin (2008) Purification of clove oil via middle vessel batch distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Shazwani, Mehat (2008) Effect of machining parameters on surface textures in wire electro discharge machining of aisi 4140 steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurulhaida, Luhid (2008) Comparing the removal performance of CO2 gas using adsorption and absorption techniques. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurulhuda, Md. Noh (2008) Fabrication of chitosan membrane : The effects of different chitosan compositions on membrane performance in treating oily wastewater. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurwahidah, Marizan (2008) Development of La1-x Fex Mn oxide of hydrogen storage for fuel cell application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nusaibah, Mohd Nor (2008) Spycam surveillance system with motion detector. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Pachiapan, Murugesan (2008) Fabrication of chitosan membrane : the effect of evaporation times on membrane performance in oily waste water treatment. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Parthiban, Sothi (2008) Determination of mechanical properties of human bone. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pejabat, Naib Canselor UMP (2008) Persembahan Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Di Majlis Makan Malam Sempena Majlis Konvokesyen Ketiga Universiti Malaysia Pahang, 22 Ogos 2008, Hotel Hyatt Regency, Kuantan. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Perutusan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Sambutan Hari Integriti Nasional 2008 Peringkat Universiti Malaysia Pahang, 3 November 2008, Astaka, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Perutusan Tahunan YH. Prof. Dato' Dr. Mohamed Said Bin Mat Lela Naib Canselor Universiti Malaysia Pahang: "Memperkukuh Asas, Menjana Kecemerlangan". In: Sempena Majlis Perutusan Tahunan Naib Canselor Universiti Malaysia Pahang 2008, 6 Februari 2008, Auditorium Kompleks Penyiaran Pahang, Kuantan. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Perutusan YH. Prof. Dato' Dr. Mohamed Said Bin Mat Lela Naib Canselor Universiti Malaysia Pahang. In: Sempena Program Perhimpunan Bulanan Universiti Malaysia Pahang Bagi Bulan Mac 2008, 10 Mac 2008, Astaka, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan YH Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Sambutan Hari Raya Aidil Fitri Universiti Malaysia Pahang 1429H, 28 Oktober 2008, Dewan Kompleks Sukan Universiti, UMP Kampus Gambang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan YH. Prof. Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Penyampaian Anugerah Perkhidmatan Cemerlang & Jasa Dikenang, 6 Jun 2008, Dewan Bankuet, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan YH. Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Perasmian Penutup Projek Semaian Kasih Universiti Malaysia Pahang, 19 Oktober 2008, Perkampungan Orang Asli Kuala Boh, Cameron Highlands. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Penyerahan Tugas Naib Canselor Universiti Malaysia Pahang, 9 Jun 2008, Dewan Perdana, Hotel M.S. Garden, Kuantan. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Majlis Perpisahan Yang Berbahagia Profesor Dr. Ir. Haji Fadhali Haji Zakaria, 28 Julai 2008, Dewan Bankuet, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Makan Malam Graduan Sempena Majlis Konvokesyen Ketiga Universiti Malaysia Pahang, 24 Ogos 2008, Hotel Hyatt Regency, Kuantan. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Makan Tengah Hari Sempena Mesyuarat Majlis Kaunseling Universiti-Universiti Malaysia Kali Ke-16, 18 Ogos 2008, Dewan Bankuet, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Pelancaran Persatuan Pelajar Siswazah Universiti Malaysia Pahang, 22 Oktober 2008, Dewan Bankuet, Universiti Malaysia Pahang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Joy of Reunion - UMPians 2008 & Perasmian Mesyuarat Agung Tahunan Persatuan Alumni Universiti Malaysia Pahang Kali Pertama, 1 November 2008, Dewan Kompleks Sukan Universiti, UMP Kampus Gambang. (Unpublished)

Pejabat, Naib Canselor UMP (2008) Teks Ucapan Yang Hormat Profesor Dato' Dr. Daing Nasir Ibrahim, Naib Canselor Universiti Malaysia Pahang. In: Sempena Majlis Penyerahan Watikah Pelantikan & Majlis Mengangkat Sumpah Jawatan Ahli-Ahli Majlis Perwakilan Pelajar Universiti Malaysia Pahang Sesi 2008/2009, 22 Oktober 2008, Bilik Mesyuarat Senat, Universiti Malaysia Pahang. (Unpublished)

Peterus, Sharon (2008) PID digital controller for DC motor speed using MC68HC11 microcontroller. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Prabagar, Murukesavan (2008) Designing and fabricating the punch chuck and precision hole punch diameter 3.0mm, 3.5mm and 4.0mm for turret punch machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pravina, Ashok Kumar (2008) Application of solid phase microextraction in gaharu essential oil analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Prema Latha, Subramaniam (2008) Moving detection using cellular neural network (CNN). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Puteri Emme Marina, Mohamad (2008) Removal of cadmium from aqueous solution by dried water hyacinth, (Eichhornia crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Qusyairi, Ali (2008) Preparation of Pt / Al2O3 for preheating system on autothermal reformer for fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

R. A., Bakar and D., Ramasamy (2008) Design and Development of Hybrid Electric Vehicle Rear Diffuser. In: National Seminar Science Technology and Sosial Sciences, Malaysia, , 3-4 June, 2008 , nil. . (Unpublished)

R. A., Bakar and Gan, Leong Ming and Wong, Hong Mun and D., Ramasamy and Mohd Fazli, Ismail (2008) Intelligent Height and Reach Adjustable Electronic Chair for Children with Dwarfism (ZUMP). Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 47-58. ISSN 1985-5176. (Published)

R. A., Bakar and Kwan, Teck Heng (2008) Analysis of Air Flow in Intake System Using Computational Fluid Dynamics. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 75-92. ISSN 1985-5176. (Published)

R. A., Bakar and Mohamad Fatasya, Othman and Asnul Hadi, Ahmad (2008) The Trends of Research in Compressed Natural Gas (CNG) Pressure Vessel Technology: An Overview. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 23-36. ISSN 1985-5176. (Published)

Rabi'atul Adawiyah, Mustafa (2008) Automatic car license plate recognition system (CLPR). Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

Radin Mohd Akhimullah, Mohd Idrus (2008) Battery charger with alarm application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Rafi, Mamat (2008) Kemajuan Dun Lepar hasil perpaduan kaum. Berita Harian .

Rafidah, Rahim (2008) Maintenance system analysis of vehicles and air-conditioners at Universiti Malaysia Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rafiuddin, Azman (2008) Study of vortex shedding around bluff body using air flow test rig. Faculty of Mechanical Engineering , University Malaysia Pahang.

Rafizuan, Ramli (2008) Machining of advanced composite. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Rahmat, Noor Yatim (2008) Design and analysis of a new racing bicycle frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rais Hanizam, Madon (2008) Fabrication and characterization of chitosan (CS) and chitosan (CS) blended polyvinyl alcohol (PVA) membrane with polyethylene glycol (PEG) 600 as additive. Faculty of Chemical Engineering, Universiti Malaysia Pahang.

Raja Ashrafuzzaim, Raja Zolkiply (2008) Analysis of Proton Persona side door (driver) using simulation tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Mohd Salleh, Raja Bahtiar (2008) Remote machining for laser cutting applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Mohd., Raja Idris (2008) Relationship between machining parameters and surface roughness of brass using lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Muhamad Anuar, Raja Mustafa (2008) Managing of solid waste on construction site. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ramasamy, D. (2008) Series hybrid electronic vehicle cost-effective power train components development. , [Research Report: Research Report] (Unpublished)

Ramasamy, Devarajan and Muhamad, Mat Noor and Azlyna, Senawi and Ahmad Syahrizan, Sulaiman (2008) Static recovery process modelling of engineering metallic alloys. In: Proceeding of Malaysian Metallurgical Conference (MMC 2008) , 3-4 December 2008 , UKM, Bangi, Selangor. pp. 1-5..

Rameesh, Gunasekaran (2008) Bluetooth message LCD display. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Raymond, Joseph (2008) Development of charging system for advanced vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Redzuan, Ahmad (2008) Develop drag estimation on hybrid electric vehicle (HEV) model using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ridhwan, Che Zake (2008) Aerodynamics of aftermarket rear spoiler. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Riza, Mior Ahmad Faiz (2008) Synchronous Motor Design and Analysing the Output Characteristics. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Robiatun, Ismail (2008) Removal of ammonium-nitrogen (NH4-N) by micro flora in drain. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rohaida, Mohd. (2008) Effect of lubrication condition on surface roughness by using lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rohani, Daud (2008) An experimental strength of coach peel rivets joining similar and dissimilar sheet materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Roslan, Ahmad Faiz (2008) Electric motor propulsion system for electric vehicles (EV). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Roslina, Sapuan (2008) Simulation & data validation of small-scale LNG system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosmainiza, Ibrahimi Husaimi (2008) Development and characterization of sulfonated olyethersulfone membrane as a potential material for direct methanol fuel cell. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rosmira, Roslan (2008) Chess digital clock. Fakulti Kejuruteraan Elektrik & Elektronik, Universiti Malaysia Pahang.

S. N., Aqida (2008) An Overview of Laser Surface Modification of Die Steels. In: 25th International Manufacturing Conference . pp. 120-128..

Sahrul Alam, Yusoff (2008) Environmental management system and its impacts on manufacturing company's performance in Malaysia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Saiful Anuar, Alwi (2008) Automatic main failure (AMF) system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Saiful Norazwan , Mohd Ariffin (2008) Implementation of proportional integral derivative (PID) controller on coupled tank liquid system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Salimah, Shafii (2008) The removal of zinc and plumbum (lead) by using hydrogen peroxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Salwani, Mohd Salleh and Wan Fathin, Nazirrudidin (2008) The Influence of Cutting Condition on Surface Roughness in Face Milling Of Mild Steel. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 127-134. ISSN 1985-5176. (Published)

Samsudin, Mohd Sauqi (2008) Analysis of real power allocation for deregulated power system. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Sanisah, Arsat (2008) Enzymatic - enhanced production of gaharu oil : effects of shaking speed and water/ gaharu ratio. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Sasheendran, Kuppusamy (2008) Analysis of hot air heat extractor for vehicle cabin. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shafiq Afif, Ariff (2008) Gas reticulation system design for Universiti Malaysia Pahang Gambang campus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shah Izwandi, Mohd Zawawi (2008) Optimization of turning parameters using genetic algorithm method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahidan, Hassan (2008) Design and fabricate a working rotary vane compressor simulation rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahidatul Nadiah, Mhd Said (2008) Salt-added method for breaking azeotrope of binary IPA-water system : using aspen plus. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shahrul Faiz, Sabir Ahmad (2008) Rostrum system for automated height adjustment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahrul Nazmi, Othman (2008) Application of calcined kaolin as support for the immobilization of lipase from candida rugosa. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shakina, Abu Hasan (2008) Microcontroller based three-level zero voltage switching pulse-width-modulation DC-to-DC converter. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .

Shamsul Nizam, Mohd Yusof@ Hamid (2008) Developing LQR to control speed motor using matlab GUI. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Shamsul Shahril, Mat Yunus (2008) Effects of flushing on electro-discharge machined surface. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shankar, Ramakishan (2008) Development of inferential measurement for air density using neural network. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharol Azri, Halim (2008) Investigation of pressure effect on methane conversions incatalytic combustion system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Shashi Kumar, S A Karagaratnan (2008) Development of semi-automatic solar gate system (Mechanical Part). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shuhairie, Mohammad (2008) GPS navigation system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shuhairy, Said (2008) Lean manufacturing implementation for low volume car production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Fairuz, Hamid (2008) Single phase motor speed control using SPWM inverter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Fatimah, Ismail (2008) Design and analysis light weight lift system for disable people. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Hajar, Mustapa (2008) Treatment of palm oil mill effluent via chitosan based on flocculation : a study of different concentration of solid and liquid chitosan. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hashimah, Mohd Hanif (2008) Fabrication of chitosan membrane : the effetcs of different polyethylene glycol compositions on membrane performance in oily wastewater treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Jamilah, Mahful (2008) Microcontroller based buck PID. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Marni, Aziz (2008) Role of electrokinetic parameters on asymmetric ultrafiltration membrane flux and rejection during separation of bovine serum albumin. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sivanesan, Shanmugam (2008) Monitoring essential oil quality of Etilingera SP1 GC and GC-MS. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sivasankaran, Praveena Nair (2008) Experimental analysis on drilling process of composite laminates. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Stanly, Anak Kesulai (2008) Influence of shot peened on fatigue bahaviour of suspension arm using strain-life approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Stephenie, Ak Kalut (2008) Enhancement of degree of deacetylation of chitin in chitosan production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sue-Rynley, Anak Emley (2008) Cryogenic-assisted high speed machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suhaimi, Md Yusoff (2008) Effect of milling time on mechanical and physical behavior of ALMMC reinforced with AL2O3. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suhaiza, Kassim (2008) Study on the ph effect of metal solution and biosorbent concentration on cooper (Cu) removal by Saccharomyces.cerevisie from simulated waste water. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sulaiman, Alias (2008) Design analysis of a piston for compressed natural gas (CNG) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Surita, Sokima (2008) Comparison between chemical compounds in gaharu smoke (burning) and gaharu oil (hidrodistillation). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Suyani, Arifin (2008) Assessing safety analysis at FKM's laboratory (general machine lab) University Malaysia Pahang by using energy analysis method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suzaley, Sulaiman (2008) Remote control of a moving vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syahril Azeem Ong, Maliki Ong (2008) Stress effect study on 6 different pattern of tyres for size 175/70 R13. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syaiful Nizam, Hassan (2008) Biopetrol production from oil waste. , [Research Report: Research Report] (Unpublished)

Syaiful Nizam, Hassan and Anis Farina, Mansor and Aizil Haikal, Omar (2008) Biopetrol Production from Acids in Palm Oil Waste. Jurnal UMP Kejuruteraan & Teknologi Komputer, 1 (1). pp. 12-22. ISSN 1985-5176. (Published)

Syed Mohd Hafiz, Syed Omar (2008) Energy saving lamp. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Syed Mohd Syukrizal, Ahmad Kori (2008) Multiple RFID doors control system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syed Shaffizan, Saad Zenal Abidin (2008) Application of statistical process control on a matrix card holder production. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sytie Syunarti, Muhitam @ Hazri (2008) The effect of inorganic fertilizer and biofertilizer on the growth of patchouli plant (Pogostemon Cablin). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

T. T., Mon and M. M., Noor and R. A., Bakar and M. R. M., Rejab (2008) Finite Element Prediction of Heat-Affected Zone in Laser-micromachining of Silicon. In: Proceeding of International Conference on MEMS and Nanotechnology . .

Tajul Arif, Zakaria (2008) Software development of assembly sequence appraoch for table fan by using intergrated TRIZ, axiomatic design and Boothroyd-Dewhurst DFA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Taufif, Zakaria (2008) Dedicated fixture design for polishing of silicon. Faculty of Mechanica; Engineering, Universiti Malaysia Pahang.

Tengku Mohd Hairil Azwan, Tengku Abdullah (2008) Design and development of exhaust gas calorimeter for gasoline/compressed-natural gas (CNG) hydraulic dynanometer engine (gacohyde) test-rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teoh, Sun Jie (2008) Computer aided interactive pressure vessel design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tg. Mahizatulazwa, Tg. Kamaruddin (2008) Synthesis and characterization of Cu/Zn - Zeolite A for the conversion of methane to liquid hydrocarbon. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Thamayanthi, Thangavelu (2008) Electronic token system using RF technology. Faculty of Electrical & Eectronic, Universiti Malaysia Pahang.

Thavaselvan, Superamaniam (2008) Extraction of essential oils from jasmine flower using solvent extraction method : A study on feed ratio effects. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Thavasigamani, Loshbinan (2008) Characterization and product indentification of sludge obtained from the recycling of lubricant into base oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ting, Swee Keong (2008) Crankcase analysis for two-stroke spark ignition engines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

UMP, . (2008) 543 pelajar UMP sertai kursus asas kenegaraan. Harian Metro . p. 10.

UMP, . (2008) Info IPT. Sinar Harian . p. 20.

UMP, . (2008) Murid kenit masuk tahun dua. Utusan Malaysia . p. 5.

UMP, . (2008) Pelan strategik UMP 2008-2010 diperkenal. Utusan Malaysia . p. 22.

UMP, . (2008) Tingkatkan penyelidikan: UMP jalin hubungan dengan MTDC. Sinar Harian . p. 2.

UMP, . (2008) UMP, MTDC bantu penyelidik komersial produk. Utusan Malaysia .

UMP, PNC (2008) Majlis Anugerah Perkhidmatan Cemerlang dan Jasa Dikenang 2008. Program UMP . pp. 1-12. (Unpublished)

Umar Baki, Muhammad Farhan (2008) Modelling and control of DC to DC converter (BUCK). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Wan Muhammad Shukri , Wan Zainal Abidin (2008) Implementation of lean practices in small and medium enterprise. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Wan Ahmad Fauzi, Wan Husain (2008) Organisasi Dan Kuasa Adat Silat Seni Gayong. Lembaga Waris Amanah Pertubuhan Silat Seni Gayong Malaysia. ISBN 983-409-80-0-6

Wan Faizal, Wan Ishak (2008) The Performance of an Ultrasound Flotation System for Heavy Metal Removal from Acid Mine Drainage in Wheal Jane Mine. School of Chemical Engineering, University of Birmingham .

Wan Faizul, Wan Mustafa (2008) Productivity improvement in industry by using witnes software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Jasrina, Wan Abd Ghani (2008) Preparation of biodiesel from waste cooking oil via two step batch catalyzed process with the aid of acid sulfuric and sodium hydroxide as the catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Johari, Wan Hanapi (2008) Room temperature of liquified petroleum gas (LPG) sensor based on p-La2O3/n-Fe2O3. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Mohd Afiq Nazman, Wan Anuar (2008) Study of voltage sag in power system with six-phase transmission line. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wan Mohd Amir Haris, Wan Sallehuddin (2008) Smart vehicle data logger using global positioning system and global system for mobile communication. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wan Mohd Firdaus, Wan Sembak (2008) Design and fabricate blanking die fir tensile test specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hazwan, Wan Ariff (2008) Design and fabricate antitheft lock for motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Azwan Fazley, Wan Ismail (2008) Design and fabricate a new concept recycle bin for general purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Sallehuddin (2008) Development of automatic fish grading machine especially for catfish with low time consumption and low capacity usage. Faculty of Mechanical Engineering, University Malaysia Pahang.

Wan Muhd Zulhasifi, W. Ab. Rahim (2008) Virtual design of multi-axis positioning for robotics application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Raimie, Wan Ramli (2008) Screening of xylanase producer from soil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Robaah, W Ahmad (2008) A DC motor controller using PID algorithm implementation on PIC. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Winetta Arianty, Ariffin (2008) Fabrication of chitosan and polyvinyl alcohol blend membrane with different concentrations PEG 400 as additive. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yusriezal, Mamat (2008) Modeling and simulation of wire electrical discharge machine process in machining aluminium alloy T6 6061. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Z., Ghazalli and M. M., Noor and Zamzuri, Hamedon (2008) Development of Conceptual Technique by Using Integrated Approaches. In: Regional Conference on Vehicle Engineering and Technology, RIVET08 , 15-17 July 2008 , Kuala Lumpur.. .

Zabidi , Mohamad (2008) Investigation of 1-dimensional analysis for two-stroke spark ignition (SI) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zaharatun Nadwa, Sha'rani (2008) Industrial wastewater treatment using constructed wetland, vegetated with Pista Statiotes (removal of cod & nitrates-nitrogen). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zaihin, Mohd Zahib (2008) Development of lift machine (using pulley and cable. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zairul Ezree , Mohd Yunus (2008) Study of machining parameters of surface roughness in electro discharge machining of tool steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zamzuri, Hamedon and M. Nafis, O. Z. and Z., Ghazalli and M. M., Noor (2008) Design, Fabrication and Testing of New Invented Spring Sickle Pole "ZappItĀ®" for Palm Harvesting. In: National Conference on Design and Concurrent Engineering (DECON 2008) , 28-29 Oktober 2008 , Melaka, Malaysia. . (Unpublished)

Zamzuri, Hamedon and Siti Haryani, Tomadi and M. M., Noor and M. N. O., Zahid (2008) Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit. In: Design and Fabricate the Prototype of a Motorized Cutter for Harvesting Palm Fruit , 16~17 Dec 2008 , KLCC, Malaysia. . (Unpublished)

Zubair, Mat Isa (2008) Extraction of gaharu esential oil using ultrasonic assisted hydrodistillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zul Amri, A. Bakar (2008) Benchmarking of the actual injection of the product versus plastic simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zularisam, A. W. (2008) Natural organic matter removal from surface water using submerged ultrafiltration membrane unit. PhD thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Zulkifli, Dollah (2008) Static and dynamic impact of unified power flow controller (UPFC) in electric transmission system. Faculty of Electrical & Electronics Engineering , Universiti Malaysia Pahang .

This list was generated on Mon Mar 18 13:05:19 2024 +08.