Items where Division is "Faculty of Mechanical and Automotive Engineering Technology" and Year is 2023

A

A., Asogan and N., Sazali and F. M., Said and R. Z., Edros and M. F., Ghazali and S. A., Che Ghani (2023) A Mini Review on Working Mechanism, Standard Operating Procedure (SOP) and Preventative Maintenance of Low Temperature Long Term (LTLT) Milk Pasteurizer. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 24-29. ISSN 2636-9575. (Published)

A. A., Lahimer and A. A., Razak and A. F., Sharol and K., Sopian (2023) Automotive cabin soak temperature control strategies for improved safety, comfort and fuel efficiency: A review. Solar Energy, 259. 416 -436. ISSN 0038-092X. (Published)

A. H., Fauzi and M. Z., Sulaiman (2023) Effect of air filter pressure on fuel consumption and cost of gas turbine in Southern Power Generation, Malaysia. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 655 -667.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

A. I., Yahaya and S. A., Che Ghani and Daing Mohamad Nafiz, Daing Idris and M. A., Aziz (2023) End-mill carbide tool wear in machining metallic biomaterial. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 783 -792.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

A. N., Esa and M. H., Yusof and Fredoline, D. Sipaan and M. F., Suhaimi (2023) Development of cooling necklace system using vortex tube. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 971 -980.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Abbas, Shabudin and Mohd Jamil, Mohamed Mokhtarudin and Payne, Stephen J. and Wan Naimah, Wan Ab Naim and Nik Abdullah, Nik Mohamed (2023) Multiscale Modelling of 3-Dimensional Brain Tissue Using Ideal Capillary Model. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 205-221.. ISSN 2195-4356 ISBN 978-981-19-4424-6 (Published)

Abesh Ahmadlou, Leila and Najafi, Gholamhassan and Loni, Reyhaneh and Kasaeian, Alibakhsh Bakhash and Rizalman, Mamat and Mohd Fairusham, Ghazali and Arman, Abdullah and Ei-Shafy, A. S. and Mousa, Mohamed (2023) Experimental investigation of PV/T and thermoelectric systems using CNT/ water nanofluids. Applied Thermal Engineering, 227 (120350). pp. 1-14. ISSN 1359-4311. (Published)

Adhreena, M S N A and Z. M., Hafizi and Vorathin, E. and N., Zahir (2023) A Study Of Fiber Bragg Grating Temperature Sensor For Under Water Temperature Monitoring. Journal of Engineering and Technology (JET), 14 (1). pp. 237-244. ISSN 2180-3811. (Published)

Agus, Nugroho (2023) Performance enhancement of residential air conditioning system using fal2o3 and tio2-polyolester nanolubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rizalman, Mamat).

Ahmad, Tanvir and Nor Syahidatul Nadiah, Ismail and Abdullah, Mat Safri and Rahman, Md. Arafatur and Beg, Mohammad Sojon and Bakhtiar, M. Taher (2023) SDN Enabled Big Data Analytics and Framework for Sensor Data of Vehicle Health, Safety and Monitoring System. In: 2023 IEEE 8th International Conference On Software Engineering and Computer Systems (ICSECS) , 25-27 August 2023 , Penang, Malaysia. pp. 117-121.. ISBN 979-8-3503-1094-8 (Published)

Ahmad Aljaerani, Hatem and Samykano, M. and Pandey, A. K. and Said, Zafar and Sudhakar, K. and Saidur, R. (2023) Effect of TiO2 nanoparticles on the thermal energy storage of HITEC salt for concentrated solar power applications. Journal of Energy Storage, 72 (108449). ISSN 2352-152X. (Published)

Ahmad Imran, Mohd Thaim and Norazlianie, Sazali and Kadirgama, Kumaran and Ahmad Shahir, Jamaludin and Faiz, Mohd Turan and Norhaida, Ab. Razak (2023) Smart Glove for Sign Language Translation. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 80-87. ISSN 2289-7895. (Published)

Ahmad Yunus, Nasution and Mohd Ruzaimi, Mat Rejab and Siregar, J. P. and Ma, Quanjin (2023) Combination of frustra shapes with cross sections and trigger circles for crash box design to absorb energy. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Aina Munirah, Ab Rasid and Muhammad Zuhaili, Suhaimi and Anwar, P. P. Abdul Majeed and Mohd Azraai, Mohd Razman and Mohd Hasnun Ariff, Hassan and Nasree, Najmi and Noor Azuan, Abu Osman and Rabiu Muazu, Musa (2023) A cluster analysis and artificial neural network of identifying skateboarding talents based on bio-fitness indicators. In: Innovation and Technology in Sports. Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 47 -56.. ISSN 2195-271X ISBN 978-981990296-5 (Published)

Alhammadi, Ali and Soar, Jeffrey and Yusaf, Talal F. and Ali, Bashar Mahmood and Kadirgama, Kumaran (2023) Redefining procurement paradigms: A critical review of buyer-supplier dynamics in the global petroleum and natural gas industry. Extractive Industries and Society, 16 (101351). pp. 1-11. ISSN 2214-790X. (Published)

Ali Mohammed Omar Salem, Ba Saleem (2023) The effects of spray atomization by using blended alumina oxide, titanium oxide, and cerium oxide nano particles with diesel fuel in direct injection engine. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Rizalman, Mamat).

Aliaa, Zanurin (2023) Characterisation and corrosion evaluation of sol gel alumina-gnp coating on nickel substrate. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).

Alsumaidaee, Yaseen Ahmed Mohammed and Paw, Johnny Koh Siaw and Yaw, Chong Tak and Tiong, Sieh Kiong and Chen, Chai Phing and Yusaf, Talal F. and Benedict, Foo and Kadirgama, Kumaran and Hong, Tanchung and Abd Alla, Ahmed N. (2023) Fault detection for medium voltage switchgear using a deep learning hybrid 1D-CNN-LSTM model. IEEE Access, 11. pp. 97574-97589. ISSN 2169-3536. (Published)

Amir, Abdul Razak (2023) Profesor Turun Padang Technology and innovation with the people of Batik. UMPSA News .

Amir, Abdul Razak (2023) Profesor Turun Padang Teknologi dan inovasi bersama kaum asal Batik. UMPSA News .

Amirul Edham, Roslee and Nik Abdullah, Nik Mohamed and Thamburaja, Prakash and Jose, Rajan (2023) A generalized thermophysical model for materials from molecular clusters to bulk crystals. Physica B: Condensed Matter, 659 (414877). pp. 1-11. ISSN 0921-4526. (Published)

Anbananthan Pillai, Munanday and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and K., Kadirgama and Ahmad Shahir, Jamaludin (2023) Analysis of convolutional neural networks for facial expression recognition on GPU, TPU and CPU. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 50-67. ISSN 2462-1943. (Published)

Anwar Ilmar, Ramadhan (2023) Characterization, experimental and simulation of heat transfer performance for Al2O3-TiO2-SiO2 ternary nanofluid with inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Aqida, S.N. and Shah, L.H and Naher, S. and Brabazon, D. (2023) Rapid solidification processing and bulk metallic glass casting. In: Comprehensive Materials Processing 2nd edition. Elsevier, pp. 1-22. ISBN 9780323960205, eBook ISBN: 9780323960212

Ariff Nijay, Ramli (2023) Optimization of assembly line balancing with energy efficiency by using tiki-taka algorithm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Abd Rashid).

Ariff Nijay, Ramli and Mohd Fadzil Faisae, Ab Rashid (2023) Modelling of assembly line balancing with energy consumption. In: AIP Conference Proceedings. AIP Conference Proceedings;15th Universiti Malaysia Terengganu Annual Symposium 2021, UMTAS 2021 , 23 - 25 November 2021 , Virtual, Online. pp. 1-10., 2746 (1). ISSN 0094-243X (Published)

Arjun, Asogan and Norazlianie, Sazali and Wan Sharuzi, Wan Harun and Devarajan, Ramasamy and Kumaran, Kadirgama (2023) Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 326-333. ISSN 2462-1943. (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2023) A low-cost digital torquemeter coordinated by arduino board. International Journal of Integrated Engineering, 15 (1). 118 -130. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Ashwindran Naidu, Sanderasagran (2023) An investigation of sqrt 2 conjecture inspired drag induced vertical axis wind turbine blade. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Azizuddin, Abd Aziz).

Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2023) A review: effect of copper percentage solder alloy after laser soldering. Soldering & Surface Mount Technology, ahead-of-print (ahead-of-print). pp. 1-29. ISSN 0954-0911. (Published)

At-Tasneem, Mohd Amin and Azmi, W. H. and M. A, Ismail (2023) Thermal–Hydraulic Performance of Water: Ethylene Glycol Mixture Through Guide-Vane Swirl Generator: A Numerical Simulation. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26-27 October , Virtual, Online. pp. 159-170. (281799). ISSN 2195-4356 (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2023) Effect of diameter, twist angle, and blade count on the thermal-hydraulic performance of a decaying twisted swirler. Case Studies in Thermal Engineering, 50 (103513). ISSN 2214-157X. (Published)

At-Tasneem, Mohd Amin and Wan Azmi, Wan Hamzah and Mohd Azmi, Ismail (2023) Numerical Simulation of Heat Transfer Performance of Water: Ethylene Glycol Mixture (W:EG) Through Turbine-Like Decaying Flow Swirler. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021 , 3 - 5 November 2021 , Virtual, Online. pp. 19-29.. ISSN 2195-4356 (Published)

Aussawarangkul, Thitisak and S. A., Che Ghani and Wattanasinbumrung, Pakanun and Sawangsri, Worapong (2023) Comparative Study on the Automated Warehouse with Cartesian Robot Using PLC and Arduino. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 627-636.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

B

Beg, Mohammad Sojon and Muhammad Yusri, Ismail and Miah, Md Saef Ullah and Mohamad Heerwan, Peeie (2023) Enhancing Driving Assistance System with YOLO V8-Based Normal Visual Camera Sensor. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 226-236. ISSN 2462-1943. (Published)

Beriache, M'hamed and Cherki, Brahim Hicham and Mokhtar Saïdia, Leila and Nor Azwadi, Che Sidik and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207. (Published)

Bhutto, Yasir Ali and Pandey, Adarsh Kumar and Saidur, Rahman Md and Laghari, Imtiaz Ali and Buddhi, D. and Tyagi, Vineet Veer (2023) Thermal behaviour of Paraffin-MWCNT stabilized by Sodium dodecylbenzene sulphonate nano-enhanced phase change material for energy storage applications. In: IOP Conference Series: Earth and Environmental Science. International Postgraduate Conference for Energy Research 2022, IPCER 2022 , 18 - 19 December 2022 , Hybrid, Kuala Lumpur. pp. 1-7., 1261 (012023). ISSN 1755-1307 (Published)

C

Carlucci, Antonio Paolo and Jaliliantabar, Farzad and Hagos, Ftwi Yohaness and Rizalman, Mamat (2023) Advanced fuel formulations containing biodiesel : Real-world applications. In: Sustainable Biodiesel : Real-World Designs, Economics, and Applications. Elsevier, Amsterdam, Netherlands, pp. 333-356. ISBN 978-012820361-3, 978-012820485-6

Che Wan, Mohd Noor and Amirah Nur, Fhatihah and Rizalman, Mamat and Wan Mohd, Norsani and Wan Nurdiyana, Wan Mansor and Mohammad Nor, Khasbi (2023) Properties study of B20 palm-methyl ester biodiesel added with oxidenanoparticle towards green marine fuels. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 212-222. ISSN 2462-1943. (Published)

D

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Durez, Asif and Ali, Muzaffar and Waqas, Adeel and Nazir, Kamran and Sudhakar, Kumarasamy (2023) Modelling and optimization of phase change materials (PCM)-based passive cooling of solar PV panels in multi climate conditions. Frontiers in Energy Research, 11 (1121138). pp. 1-11. ISSN 2296-598X. (Published)

Dwivedi, Pushpendu and Ganesh, Sujay Ashwinraj and Kumarasamy, Sudhakar and Soni, Archana and Priya, S. Shanmuga (2023) Thermal and electrical performance of uncooled, nature-cooled, and photovoltaic thermal module. International Journal of Photoenergy, 2023 (4720545). pp. 1-12. ISSN 1687-529X (Online). (Published)

E

Edi, Syafri and Jamaluddin, Jamaluddin and Nasmi, Herlina Sari and Melbi, Mahardika and Lisman, Suryanegara and Rafles, Sinaga and Ferriawan, Yudhanto and Rahadian, Zainul and Agus, Nugroho and Anish, Khan and Mohammad, A. Wazzan (2023) Effect of ultrafine grinding and ultrasonication duration on the performance of polyvinyl alcohol (PVA) agave gigantea cellulose micro fiber (CMF) bio-composite film. Journal Of Natural Fibers, 20 (2192545). pp. 1-19. ISSN 1544-0478. (Published)

Erdiwansyah, E. and Gani, Asri and Rizalman, Mamat and Nizar, Muhammad and Yana, Syaifuddin and S. M., Rosdi and Mohd Zaki, Muhammad Faiz and Sardjono, Ratnaningsih Eko (2023) The business model for access to affordable re on economic, social, and environmental value : A review. Geomatics and Environmental Engineering, 17 (5). pp. 5-43. ISSN 1898-1135. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husin, Husni and Nasaruddin, Nasaruddin and Gani, Asri and Faisal, Muhammad and Muhtadin, Muhtadin and Zaki, Muhammad and Rizalman, Mamat (2023) Comparison of temperature, radiation rate, heat loss, furnace and thermal efficiencies of different plates in the FBC combustion chamber. Frontiers in Heat and Mass Transfer, 20 (29). pp. 1-9. ISSN 2151-8629. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husni, Husin and Nasaruddin, Nasaruddin and Asri, Gani and Rizalman, Mamat (2023) Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation. Results in Engineering, 19 (101246). pp. 1-12. ISSN 2590-1230. (Published)

Ezazi, Mohammadamin and Quazi, Moinuddin Mohammed (2023) Recent developments in two-dimensional materials-based membranes for oil–water separation. Membranes, 13 (677). pp. 1-24. ISSN 2077-0375. (Published)

F

Farhana, K. and K., Kadirgama and S., Subramonian and D., Ramasamy and M., Samykano and Mahamude, A. S. F. (2023) Applications of graphene nanomaterials in energy storage—A state-of-art short review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 595 -609.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Farhana, Kaniz and K., Kadirgama and Mohamed, Danial and Mahamude, Abu Shadate Faisal and Subramonian, Sivarao and D., Ramasamy and Mahendran, Samykano (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 215-223.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Vertical and spanwise wake flow structures of a single spire over smooth wall surface in a wind tunnel. Journal of Applied Fluid Mechanics, 16 (12). pp. 2459-2470. ISSN 1735-3572. (Published)

Fitriyana, Deni Fajar and Irawan, Agustinus Purna and Bahatmaka, Aldias and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Muhamadin, Rilo Chandra and Cionita, Tezara and Siregar, Januar Parlaungan and Jehadus, Emilianus and Baskara, Gregorius Dimas and Laksmidewi, Dwinita and da Silva Guterres, Natalino Fonseca (2023) The effect of temperature on the hydrothermal synthesis of carbonated apatite from calcium carbonate obtained from green mussels shells. ARPN Journal of Engineering and Applied Sciences, 18 (11). pp. 1215-1224. ISSN 1819-6608. (Published)

G

G., Kadirgama and Mohd Kamal, Kamarulzaman and D., Ramasamy and Kadirgama, Kumaran and Sakinah, Hisham (2023) Classification of lubricants base oils for nanolubricants applications—A review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 205-213.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Gani, Asri and Erdiwansyah, E. and Munawar, Edi and Mahidin, M. and Rizalman, Mamat and S. M., Rosdi (2023) Investigation of the potential biomass waste source for biocoke production in Indonesia : A review. Energy Reports, 10. pp. 2417-2438. ISSN 2352-4847. (Published)

Ghiasi, Pedram and Najafi, Gholamhassan and Ghobadian, Barat and Jafari, Ali and Rizalman, Mamat and Mohd Fairusham, Ghazali (2023) CFD-study of the H-Rotor Darrius wind turbine performance in drag-lift and lift regime : Impact of type, thickness and chord length of blades. Alexandria Engineering Journal, 67. pp. 51-64. ISSN 1110-0168. (Published)

Goel, Varun and Dwivedi, Ankur and Kumar, Rajat and Kumar, Reji Rajamony and Pandey, Adarsh Kumar and Chopra, Kapil and Tyagi, Vineet Veer (2023) PCM-assisted energy storage systems for solar-thermal applications: Review of the associated problems and their mitigation strategies. Journal of Energy Storage, 69 (107912). pp. 1-30. ISSN 2352-152X. (Published)

Gopi, Ajith and Sharma, Prabhakar and Sudhakar, Kumarasamy and Ngui, Wai Keng and Kirpichnikova, Irina and Cuce, Erdem (2023) Weather impact on solar farm Performance : A comparative analysis of machine learning techniques. Sustainability (Switzerland), 15 (439). pp. 1-28. ISSN 2071-1050. (Published)

H

H. N., Yakin and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2023) Effect of particle discretisation and horizon size on the displacement and damage plot using bond-based peridynamics. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 881 -897.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Hafizi, Z. M. and Ibrahim, I. N, and Vorathin, E. (2023) Delamination detection in thin-walled composite structures using acoustic pitch-catch technique with Fiber Bragg Grating Sensors. Jurnal Teknologi (Sciences & Engineering), 85 (3). pp. 35-42. ISSN 2180–3722. (Published)

Halim, Qayyum and Nik Mohamed, Nik Abdullah and Rejab, M. R. M. and Kamarulzaman, Mohd Kamal and Hisham, Sakinah and Aizzuddin, A.M. (2023) Laser processing of La61.4Al15.9Ni11.35Cu11.35 based functionally graded material bulk metallic glass. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering: 2nd Energy Security and Chemical Engineering Congress, (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 309-323.. ISBN 978-981-19-4425-3 (Published)

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Mohd Farid, Ismail and Rosminazuin, Ab Rahim and Ali, Hafiz Muhammad (2023) Tribology performance of polyol-ester based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (18). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Haneef, M. S. and Lau, G. H. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2023) Effect of laser micro-drilling parameters on hole geometry and hole formation of thin sheet SS304. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 803 -813.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Haneef, Mohd Sabki (2023) Effect of material thickness on Duration, hole characteristics, and drilling mechanism on micro-laser drilling. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Aiman, Mohd Halil).

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2023) Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability. Sustainability (Switzerland), 15 (10682). pp. 1-37. ISSN 2071-1050. (Published)

Hatem Ahmad, Mohamed Aljaerani (2023) Thermophysical and thermal cyclic behavior of nano-enhanced molten salts for concentrated solar power. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Hazim, Khir and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Dewika, M. and Samykano, Mahendran (2023) Effect of lead sintering aid to TiO2 photoanode for flexible dye sensitized solar cell. In: IOP Conference Series: Earth and Environmental Science. International Postgraduate Conference for Energy Research 2022, IPCER 2022 , 18 - 19 December 2022 , Hybrid, Kuala Lumpur. pp. 1-7., 1261 (012016). ISSN 1755-1307 (Published)

Haziqatulhanis, Ibrahim (2023) Nanocellulose-based adsorbent from pandan leaves for copper ions removal from wastewater. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Hoh, R. B. and Nasrul Azuan, Alang and Nasrul Hadi, Johari and Norhaida, Ab Razak and Juliawati, Alias (2023) Applying TRIZ to design and develop roof shield for two-wheeled motorcycle. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 15-23. ISSN 2636-9575. (Published)

Husin, Husni and Mahidin, Mahidin and Marwan, Marwan and Nasution, Fahrizal and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Muchtar, Syawaliah and Yani, Firda Tirta and Rizalman, Mamat (2023) Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and Ni/aceh natural zeolite as catalysts. Heliyon, 9 (e14880). pp. 1-10. ISSN 2405-8440. (Published)

Husnain, M.M.N. and Akramin, M. R.M. and Shaari, M. S. and Takahashi, Akiyuki and Bashiri, Abdullateef H. and Alshoaibi, Abdulnaser M. (2023) Comparison of Monte Carlo and bootstrap analyses for residual life and confidence interval. Materials Science- Poland, 41 (1). pp. 15-26. ISSN 2083-1331. (Published)

Hussain, Abdul Ahad and Kamran, Kashif and Hina, Maryam and Ishaq, Mubashera and Naz, Muhammad Y and Bashir, Shahid and Sarwar, Nadeem and Quazi, Moinuddin Mohammed (2023) Effect of electrokinetic treatment time on energy consumption and salt ions removal from clayey soils. Materials Research Express, 10 (05550). ISSN 2053-1591. (Published)

I

Idris, Mat Sahat and Ma, Quanjin and M. R. M., Rejab (2023) A study on 3D printing usage among Malaysian users. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9483 -9491. ISSN 2231-8380 (online). (Published)

Ikeda, Keigo and Kamimori, Kota and Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Endo, Ayato and Kato, Taro and Liu, Xiaojun and Peeie, Mohamad Heerwan and Kato, Hideaki and Narita, Takayoshi (2023) Basic study on mechanical vibration suppression system using 2-degree-of-freedom vibration analysis. Vibration, 6 (2). pp. 407-420. ISSN 2571-631X. (Published)

Imam Ul, Ferdous and N. A., Alang and J., Alias and A. H., Ahmad and Suraya, Mohd Nadzir (2023) Rupture Life and Failure Mechanism of Grade 91 Steel Under the Influence of Notch Constraint. Journal of Failure Analysis and Prevention, 23 (2). pp. 497-510. ISSN 1547-7029. (Published)

Imtiaz, Ali (2023) Energy, exergy and economic analysis of nano-enhanced phase change materials integrated solar photovoltaic thermal systems. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Inn, Lai Qit and Oumer, A. N. and Azizuddin, Abd Aziz and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Numerical Analysis of Battery Thermal Management System of Electric Vehicle. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 106-114. ISSN 2735-0142. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk, Al2O3, and Fe2O3 on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Influence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irlina Jazlin, Jamaludin and Islah Munjih, Ilmam Mumtaz and Zulkifli, Ahmad and Mohamad Zairi, Baharom (2023) Development of the table tennis robot launcher. In: Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 213 -222.. ISSN 2195-271X ISBN 978-981990296-5 (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Munanda, Rafi and Nugraha, Fariz Wisda and Rusiyanto, R. and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Design, manufacturing and characterization of biodegradable bone screw from PLA Prepared by fused deposition modelling (FDM) 3D printing technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 205-215. ISSN 2289-7879. (Published)

J

J., Mogan and W. S. W., Harun and K., Kadirgama and D., Ramasamy and F. M., Foudzi and A. B., Sulong and F., Tarlochan and F., Ahmad (2023) Fused Deposition Modelling of Polymer Composite: A Progress. Polymers, 15 (1). pp. 1-27. ISSN 2073-4360. (Published)

Jacob, Jeeja and Paul, John and Pandey, A. K. and Selvaraj, Jeyraj and Nasrudin, Abd Rahim and Samykano, Mahendran and Kadirgama, Kumaran (2023) Analyzing long-term reliability and potential of organic eutectic Phase Change Material as thermal batteries. Journal of Energy Storage, 74 (109480). pp. 1-11. ISSN 2352-152X. (Published)

Jacob, Jeeja and Paul Nadakkal, John and Selvaraj, Jeyraj and Kadirgama, Kumaran (2023) Economic analysis of phase change material integrated photovoltaic thermal systems : A short communication. In: IOP Conference Series : Earth and Environmental Science. International Postgraduate Conference for Energy Research 2022, IPCER 2022 , 18 - 19 December 2022 , Hybrid, Kuala Lumpur. pp. 1-7., 1261 (012010). ISSN 1755-1307 (Published)

Jakfar, Jakfar and Husin, Husni and Pontas, Komala and Mamat, Rizalman and Salleh, Mohd Rosdi and Zulrika, Mirna and Ahmadi, Ahmadi (2023) Modification of the fermentation process and papain enzymes in the manufacture of virgin coconut oil using optimization of response surface methodology, central composite design. Fermentation, 9 (434). pp. 1-14. ISSN 2311-5637. (Published)

Jeevendran, Kananathan (2023) Mechanical behavior of fdm 3d printed coconut wood-filled pla. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

K

Kadirgama, Ganesaan and Muhammad Izdihar, Razman and Devarajan, Ramasamy and K., Kadirgama and Farhana, Kaniz (2023) Graphene as an alternative additive in automotive cooling system. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 13-35.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Kalidasan, B. and Pandey, A. K. and Saidur, R. and Aljafari, Belqasem and Yadav, Aman and Samykano, Mahendran (2023) Green synthesized 3D coconut shell biochar/polyethylene glycol composite as thermal energy storage material. Sustainable Energy Technologies and Assessments, 60 (103505). pp. 1-11. ISSN 2213-1388. (Published)

Kavin, Klinsman Konsil and Norazlianie, Sazali and Kumaran, Kadirgama and Norazwina, Zainol (2023) Analysis on the Performance of Designed Fluidized Bed Dryer for Drying Coffee Beans. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 99-109. ISSN 2462-1943. (Published)

Kazem, Shahverdi and Gholamhassan, Najafi and Rizalman, Mamat and Mohd Fairusham, Ghazali and A.S., EI-Shafy and Mohamed, Mousa (2023) Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72. pp. 162-172. ISSN 0973-0826. (Published)

Keng, Ngui Wai and Mohd Salman, Leong and Mohd Ibrahim, Shapiai and Hee, Lim Meng (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680. (Published)

Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi and Fitriyana, Deni Fajar and Widodo, Rahmat Doni and Ismail, Rifky and Irawan, Agustinus Purna and Cionita, Tezara and Siregar, Januar Parlaungan and Nur Hidayah, Ismail (2023) A Study on Characteristics of Brake Pad Composite Materials by Varying the Composition of Epoxy, Rice Husk, Al2O3, and Fe2O3. Automotive Experiences, 6 (2). pp. 303-319. ISSN 2615-6202. (Published)

Khan, Nida and Sudhakar, K. and Rizalman, Mamat (2023) Biocrude potential assessment of macroalgae for sustainable biofuel production. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 145 -156.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Khan, Nida and Sudhakar, Kumarasamy and Rizalman, Mamat (2023) Seaweed farming : A perspectives of genetic engineering and nano-technology application. Heliyon, 9 (e15168). pp. 1-13. ISSN 2405-8440. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Building integrated photovoltaics powered electric vehicle charging with energy storage for residential building: Design, simulation, and assessment. Journal of Energy Storage, 63 (107050). ISSN 2352-152X. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof (2023) Comparison of mono and bifacial modules for building integration and electric vehicle charging: A case study in Sweden. Energy Conversion and Management: X, 20 (100420). ISSN 2590-1745. (Published)

Khan, Sanjay and Sudhakar, K. and Mohd Hazwan, Yusof and Wan Azmi, Wan Hamzah and Ali, Hafiz Muhammad (2023) Roof integrated photovoltaic for electric vehicle charging towards net zero residential buildings in Australia. Energy for Sustainable Development, 73. pp. 340-354. ISSN 0973-0826. (Published)

Khir, Hazim and Pandey, A. K. and Saidur, R. and Muhammad Shakeel, Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2023) Improved charge transfer through the minimal addition of Pb as a sintering aid to TiO2-based low-temperature dye sensitised solar cell. Ceramics International, 49 (11). pp. 17620-17628. ISSN 0272-8842. (Published)

Khir, Hazim and Pandey, Adarsh Kumar and Saidur, Rahman Md and Muhammad Shakeel, Ahmad and Nasrudin, Abd Rahim and Dewika, M. and Samykano, Mahendran (2023) Improved charge transfer through the minimal addition of Pb as a sintering aid to TiO2-based low-temperature dye sensitised solar cell. Ceramics International, 49 (11). 17620 -17628. ISSN 0272-8842. (Published)

Khoo, Pui San and Shukur, Abu Hassan and Ahmad Ilyas, Rushdan and Quanjin, Ma and Reby, Roy K.E. and M, Mubarak Ali and Loganathan, T. G. and Adhiguna, Rizky Tirta (2023) Compressive behaviour of tin slag polymer concrete confined with glass fibre reinforced epoxy under various loading speeds. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Peddakapu, K. (2023) Swarm intelligence-based MPPT design for PV systems under diverse partial shading conditions. Energy, 265 (126366). pp. 1-17. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Peeie, Mohamad Heerwan and Narita, Takayoshi and Kato, Hideaki (2023) Research on yaw moment control system for race cars using drive and brake torques. Vehicles, 5 (2). pp. 1-20. ISSN 2624-8921. (Published)

Kumaresan, R. and Kananathan, J. and Samykano, M. and Kadirgama, Kumaran and Badadhe, Avinash M. (2023) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. Journal of Engineering and Technology (JET), 14 (1). pp. 91-99. ISSN 2180-3811. (Published)

Kusan, Reveendran and Mohd Nadzeri, Omar and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Azizul, Aziz (2023) Investigation on the acceleration of wrist and waist during a golf swing towards the ball trajectory. In: Lecture Notes in Bioengineering; International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 - 15 November 2022 , Kuala Lumpur. 223 -232.. ISSN 2195-271X ISBN 978-981990296-5 (Published)

L

L., Sandanamsamy and J., Mogan and K., Rajan and W. S. W., Harun and I., Ishak and F. R. M., Romlay and M., Samykano and K., Kadirgama (2023) Effect of process parameter on tensile properties of FDM printed PLA. Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Laghari, Imtiaz Ali and Pandey, A. K. and Samykano, Mahendran and Aljafari, Belqasem and Kadirgama, Kumaran and Sharma, Kamal and Tyagi, V. V. (2023) Thermal energy harvesting of highly conductive graphene-enhanced paraffin phase change material. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 9391-9402. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Laghari, Imtiaz Ali and Pandey, Adarsh Kumar and Samykano, Mahendran and Aljafari, Belqasem and Kadirgama, Kumaran and Sharma, Kamal Kant and Tyagi, Vineet Veer (2023) Thermal energy harvesting of highly conductive graphene‑enhanced parain phase change material. Journal of Thermal Analysis and Calorimetry, 148 (18). pp. 9391-9402. ISSN 1388-6150. (Published)

Li, Maoqi (2023) Investigation on maneuverability improvement of a four-wheel drive and rear-wheel steering system : numerical simulation analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohammad Izhar, Ishak).

Luqman Hakim, Alias and Jamiluddin, Jaafar and Siregar, Januar Parlaungan and Cionita, Tezara and Mohd Bijarimi, Mat Piah and Agustinus Purna, Irawan and Hamidon, Salleh and Oumer, Ahmed Nurye (2023) Influence of dammar gum application on the mechanical properties of pineapple leaf fiber reinforced tapioca biopolymer composites. Polymer Composites, 45 (3). 2858 -2868. ISSN 1548-0569. (Published)

M

M., Jamil and Mohd Adnin, Hamidi and Ahmad Fitri, Yusop and M. F., Zakiyuddin and Mohd Nadzeri, Omar (2023) Study of engine performance, emission and combustion of reactivity controlled compression ignition (RCCI) mode engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 51-63.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M., Nasuha and Mohd Rashidi, Maarof and Asnul Hadi, Ahmad and Shayfull, Z. and Sheng, T. M. (2023) Effect of cavity thickness on copper alloy corrosion resistance. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 315 - 328.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M., Norhafana and C. K., Ihsan and Noor, M. M. and A. A., Hairuddin and K., Kadirgama and D., Ramasamy (2023) Emission characteristics effect on rice bran oil enriched with diesel fuel on compression ignition engine. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 75 -88.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M. A., Fitriady and Nurizzatul Atikha, Rahmat and A. F., Mohammad and S. A., Zaki (2023) Numerical simulation of the boundary layer development behind a single quarter elliptic-wedge spire. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9421 -9432. ISSN 2231-8380 (online). (Published)

M. Arif, Fikri and Suraparaju, Subbarama Kousik and Mahendran, S. and Pandey, A. K. and Rajamony, Reji Kumar and K., Kadirgama and M. F., Ghazali (2023) Enhanced thermal properties of phase change materials through surfactant-functionalized graphene nanoplatelets for sustainable energy storage. Energies, 16 (22). pp. 1-18. ISSN 1996-1073. (Published)

M. F., Rani and M. R. M., Rejab and M. I., Ibrahim and N. K., Romli (2023) Mechanical characterization of 3/2 fibre metal laminate materials. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9753 -9763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F., Zakiyuddin and Muthanna, Jamil and M. A., Hamidi and A. F., Yusop (2023) Effect of Primary Reference Fuel on Reactivity-Controlled Compression Ignition Engine Emission Produce. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 65-74.. ISBN 978-981-19-1457-7 (Published)

M. F. F., Ab Rashid and Ariff Nijay, Ramli (2023) A new multiobjective tiki-taka algorithm for optimization of assembly line balancing. Engineering Computations. pp. 1-30. ISSN 0264-4401. (In Press / Online First) (In Press / Online First)

M. H., Mohd Zaki and S. R. A., Idris (2023) A simulation study on interfacial reaction between Sn3Ag0.5Cu and Sn0.7Cu using different substrates after reflow soldering. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 815-824.. ISSN 2195-4356 ISBN 978-981-19-1456-0 (Published)

M. I., Hadi and M. R. M., Akramin and M. S., Shaari (2023) Finite element analysis of automotive door hinge. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 3-11.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M. I., Ibrahim and M. R. M., Rejab and N. K., Romli and Quanjin, Ma and M. F., Rani (2023) Effects on hybridization of interlayer composites and self-reinforced polypropylene. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9679 -9688. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. I. M., Ramli and M. A. F., Romzi and J., Alias and Nur Azhani, Abd Razak (2023) Effect of artificial aging on the microstructure and mechanical properties of AJ62 magnesium alloys. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 339 -348.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M. N. M., Salleh and M., Ishak and M. M., Quazi (2023) A brief overview on the utilization of high strength steel (HSS) for automotive structural welding applications. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 279 -288.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

M. S. M., Sani and K. M., Jelani and N. A. Z., Abdullah and M. N., Abdul Rani and M. A., Yunus (2023) Finite Element Modelling and Updating of Motorcycle Structure with Suitable Length of Connecting Element. Journal of Acoustics and Vibration Research (JAVR), 1 (1). p. 7689. (Published)

M. Z., Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Samykano, Mahendran and Ali, Hafiz Muhammad (2023) Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement : A review. Journal of the Taiwan Institute of Chemical Engineers, 148 (105032). pp. 1-16. ISSN 1876-1070. (Published)

Ma, Quanjin and M. R. M., Rejab (2023) The energy-absorbing characteristics of two-dimensional periodic self-reinforced polypropylene (SRPP) sandwich panel. Science Talks, 6 (100170). pp. 1-6. ISSN 2772-5693. (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohammad, Azeem and Mat Sahat, Idris and M.F., Rani and Kumar, A.Praveen (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10 (100170). pp. 1-10. ISSN 2666;3597. (Published)

Madderla, Sandhya (2023) Development of water-ethylene glycol based graphene nanoplatelets/cellulose nanocrystal hybrid nanofluid as radiator coolants and its performance evaluation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Devarajan, Ramasamy).

Maity, Rittick and Sudhakar, K. and Amir, Abdul Razak and Karthick, A. and Barbulescu, Dan (2023) Agrivoltaic: A strategic assessment using SWOT and TOWS matrix. Energies, 16 (8). pp. 1-18. ISSN 1996-1073. (Published)

Maliessa Nabilah, Mazelan (2023) The effect of different Sn-Ag-Cu (SAC) solder form on solder/Cu joint performance through microwave hybrid heating. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Rabiatull Aisha, Idris).

Manda, M. S. and M. R. M., Rejab and S., Abu Hassan (2023) Evaluation of tin slag polymer concrete column compressive behavior using finite element analysis. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 289-301.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Megalingam, A and Asnul Hadi, Ahmad and Nasrul Azuan, Alang and Juliawati, Alias and Nur Azhani, Abd Razak (2023) Application of response surface methodology for parameter optimization of aluminum 7075 thixoforming feedstock billet production. Journal of Materials Engineering and Performance, 32 (13). pp. 5919-5931. ISSN 1059-9495. (Published)

Miah, Mohammad Badrul Alam and Suryanti, Awang and Rahman, Md Mustafizur and Sanwar Hosen, A. S. M. (2023) Keyphrase distance analysis technique from news articles as a feature for keyphrase extraction: An unsupervised approach. International Journal of Advanced Computer Science and Applications (IJACSA), 14 (10). pp. 995-1002. ISSN 2156-5570(Online). (Published)

Mimi Muzlina, Mukri and Nor Atiqah, Zolpakar (2023) Optimization of Temperature Rise in Turning Using Single Objective Genetic Algorithm. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual Online. pp. 527-540., 882. ISSN 1876-1100 (Published)

Mimi Muzlina, Mukri and Nor Atiqah, Zolpakar and Pathak, Sunil (2023) Optimization of Machining Parameters in Turning for Different Hardness using Multi-Objective Genetic Algorithm. Journal of Mechanical Engineering, 20 (3). pp. 25-48. ISSN 1823-5514. (Published)

Miminorazeansuhaila, Loman and Mohd Hafizi, Zohari and F., Lamin (2023) High-cycle fatigue life behaviour of fabricated glass fibre-reinforced polymer. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). 10711 -10719. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Minhalina, Ahmad Buhairi and Farhana, Mohd Foudzi and Fathin Iliana, Jamhari and Abu Bakar, Sulong and Nabilah Afiqah, Mohd Radzuan and Norhamidi A., Muhamad and Intan Fadhlina, Mohamed and Abdul Hadi, Azman and Wan Sharuzi, Wan Harun and Al-Furjan, M. S.H. (2023) Review on volumetric energy density: Influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 2363-9512. (Published)

Moey, L. K. and Tok, R. J. and Tai, V. C. and Mathew, P. Reuben and Wu, J. Kai-Seu and Oumer, A. N. (2023) Investigation of opening position on natural cross ventilation for an isolated building. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 825 -838.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Moey, L.K. and Alyazidi, S. M. S. and Tai, V. C. and Kai-Seun, J. W. and Mathew, P. R. and Oumer, A. N. (2023) Effect of opening ratios with and without louvers in cross ventilation using CFD. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 579 -594.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Mohamad Sazri Fahmi, Ramli and Muhammad Hazli, Mazlan and Takano, Hiromitsu and Abdul Halim, Abdullah and Muhammad Hilmi, Jalil (2023) A review of material, design, and techniques in 3D printing for medical applications. International journal of online and biomedical engineering, 19 (16). pp. 38-64. ISSN 2626-8493. (Published)

Mohamad Zairi, Baharom and Zulkifli, Ahmad@Manap and Nursya Mimie Ayuny, Ismail and Mohd Hasnun Ariff, Hassan and Karjanto, Juffrizal and Khairil Anwar, Abu Kassim (2023) Factors contributing to the pedal error or pedal misplacement among malaysian car drivers : A survey. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26-27 October 2021 , Virtual, Online. pp. 51-60., 882 (281829). ISSN 1876-1100 ISBN 978-981191576-5 (Published)

Mohamad Zairi, Baharom and Zulkifli, Ahmad@Manap and Nursya Mimie Ayuny, Ismail and Mohd Hasnun Ariff, Hassan and Karjanto, Juffrizal and Khairil Anwar, Abu Kassim (2023) Pedal Error Naturalistic Driving Study Among Malaysian Drivers. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 61-75.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (Published)

Mohammad Shahrul Nizam, Amin Nuddin and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and K., Kadirgama and D., Ramasamy and Wan Sharuzi, Wan Harun (2023) A study on adjustable height stand for temperature scanner. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 115-125. ISSN 2462-1943. (Published)

Mohd Amiruddin, Fikri and Wan Mohd, Faizal and Hasyiya, Karimah Adli and Rizalman, Mamat and Wan Hamzah, Wan Azmi and Ramadhan, Anwar Ilmar (2023) Experimental study on thermo-physical properties of TiO2-SiO2 nanofluids (70:30) in water/ethylene glycol mixture. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (2). pp. 200-214. ISSN 2289-7879. (Published)

Mohd Arif Fikri, Rosli (2023) High-performance MWCNT/graphene nano-enhance phase change materials for efficient thermal energy storage. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mahendran, Samykano).

Mohd Azrul Hisham, Mohd Adib (2023) Penyelidikan berteknologi mampu memartabatkan golongan OKU. Create . ISSN 1823-7487

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. N., Salleh and M. F., Ghazali (2023) Defect identification during pulse mode laser welding process through the pattern recognition analysis of the acquired sound frequency spectrum. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 793-802.. ISSN 2195-4356 ISBN 978-981-19-1456-0 (Published)

Mohd Fadzil Faisae, Ab Rashid and Nik Mohd Zuki, Nik Mohamed and Abdullah, Nasser (2023) Development of a discrete event simulation tool for assembly line simulation. In: AIP Conference Proceedings. AIP Conference Proceedings; 15th Universiti Malaysia Terengganu Annual Symposium 2021, UMTAS 2021 , 23 - 25 November 2021 , Virtual, Online. pp. 1-7., 2746 (1). ISSN 0094243X (Published)

Mohd Farid, Ismail and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Sharma, Korada Viswanatha and Nurul Nadia, Mohd Zawawi (2023) Stability assessment of polyvinyl-ether-based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (23). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Hafiz Muhammad, Ali (2023) Thermal and tribological properties enhancement of PVE lubricant modified with SiO2 and tio2 nanoparticles additive. Nanomaterials, 13 (42). pp. 1-18. ISSN 2079-4991. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of TiO/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of tio/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Firdaus, Hassan and Syazani, Mohd Sanosi and Ja'afar, Othman and Mohd Shahrul Azmi, Mohamad Yusoff (2023) Advancing balancing machine technology: A cost-effective solution for laboratory and small-medium enterprises. Journal of Mechanical Engineering and Sciences (JMES), 17 (4). 9742 -9752. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Mohd Hamisa, Abdul Hamid (2023) Characterization, performance and optimization of nanolubricants in automotive air-conditioning with electrically-driven compressor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Azmi, Wan Hamzah).

Mohd Hilmy Naim, Mohd Yakin and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim and Nik Abdullah, Nik Mohamed (2023) A new quasi-brittle damage model implemented under quasi-static condition using bond-based peridynamics theory for progressive failure. Theoretical and Applied Mechanics, 50 (1). 73 -102. ISSN 1450-5584. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Said, Zafar and Pandey, A. K. (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Samykano, Mahendran and Saidur, R. and Yusaf, Talal (2023) Improving the thermophysical properties of hybrid nanocellulose-copper (II) oxide (CNC-CuO) as a lubricant additives: A novel nanolubricant for tribology application. Fuel, 332 (126229). pp. 1-15. ISSN 0016-2361. (Published)

Mohd Kamal, Kamarulzaman and Sakinah, Muhamad Hisham and Kadirgama, Kumaran and Ramasamy, Devarajan and Samykano, Mahendran and Said, Zafar and Pandey, Adarsh Kumar (2023) Improvement in stability and thermophysical properties of CNC-MXene nanolubricant for Tribology application. Journal of Molecular Liquids, 381 (121695). pp. 1-16. ISSN 0167-7322. (Published)

Mohd Nasuha, Ab Halim (2023) Investigation of nickel aluminium bronze (nab) metals cast and its properties. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Mohd Nazif, Baharuddin and Norazwani, Muhammad Zain and Wan Sharuzi, Wan Harun and Eida Nadirah, Roslin and Farizah Adliza, Ghazali and Siti Norzailina, Md Som (2023) Development and performance of particleboard from various types of organic waste and adhesives : A review. International Journal of Adhesion and Adhesives, 124 (103378). pp. 1-9. ISSN 0143-7496. (Published)

Mohd Padzly, Radzi and Mohd Hafizi, Zohari (2023) A review on the bolted flange looseness detection method. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 287-298., 882 (281829). ISSN 1876-1100 ISBN 978-981191576-5 (Published)

Mohd Rezan, Hamji Ajirun and Syifak Izhar, Hisham and Mohd Nadzeri, Omar and Nasrul Hadi, Johari (2023) Covid-19 Embedded with Aerosol Particles Travel Simulation Inside a Mosque. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 365-373.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hafiz, Muhammad Ali (2023) Viscosity and friction reduction of double end capped polyalkylene glycol nanolubricants for eco friendly refrigerant. Lubricants, 11 (129). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hendrawati, Tri Yuni (2023) Stability and thermal conductivity of mono and hybrid nanoparticles dispersion in double-end capped pag lubricant. Lubricants, 11 (1). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Muhamad Norkhizan, Abdullah and Ahmad Fitri, Yusop and Rizalman, Mamat and Mohd Adnin, Hamidi and Sudhakar, Kumarasamy and Yusaf, Talal (2023) Sustainable biofuels from first three alcohol families : A critical review. Energies, 16 (648). pp. 1-21. ISSN 1996-1073. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Nor Shaufina, Md Jaafar (2023) Spiral wrap using CFRP strip to strengthen TSPC column under compression. In: Proceedings 2nd International TVET & Entrepreneurship Conference 2023. 2nd International TVET & Entrepreneurship Conference 2023 (ITEC 2023) , 11-12 October 2023 , Politeknik Negeri Medan & Politeknik Kota Bharu. pp. 247-256.. ISBN 978-967-2702-70-2 (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit (2023) Effect of hybrid FRP confinement on tin slag polymer concrete compressive strength. International Journal of Engineering and Advanced Technology (IJEAT), 12 (5). pp. 119-126. ISSN 2249-8958 (Online). (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Nurhadiyanto, Didik (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material confinement. Polymers, 15 (817). pp. 1-19. ISSN 2073-4360. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and S. S., Amirnuddin (2023) Splitting tensile strength study of tin slag polymer concrete. Materials Today : Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Siti Safarah, Amirnuddin (2023) Finite Element Modeling of Tin Slag Polymer Concrete Column with FRP Material Confinement under Compression. In: Reinforced and Porous Materials for Structural Applications. Penerbit UTM, Universiti Teknologi Malaysia, pp. 127-152. ISBN 978-983-52-1933-7

Muhammad Amir Aikal, Azmin and Mohd Azrul Hisham, Mohd Adib (2023) Consistency data of peak expiration flow, SpO2 level and heart rate measurement using spirometer volume (SpiroLuME) device. TWIST (International Multidisciplinary Journal), 18 (4). pp. 317-322. ISSN 1759-0418. (Published)

Muhammad Amirul Azwan, Azmi and Amir, Abdul Razak and Muhammad Amir Syahiran, Muhammad Tarminzi and Ahmad Fadzil, Sharol and Ahmmad Shukrie, Md Yudin and Zafri Azran, Abdul Majid (2023) Hydrodynamics investigations of kaffir lime leaves drying in a swirling solar drying chamber with inclined slotted angle air distributor. CFD Letters, 15 (2). pp. 1-16. ISSN 2180-1363. (Published)

Muhammad Ammar, Nik Mu’tasim and Mohd Fadzil Faisae, Ab Rashid (2023) Hybrid flow shop scheduling problem with energy utilization using non-dominated sorting genetic algorithm-III (NSGA-III) optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10862 -10877. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Arifuddin, Fitriady and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2023) Urban Heat Island Phenomenon in Tropical Countries: Analysis of the Wake Flow Behind Slender High-Rise Building. In: Lecture Notes in Energy. Lecture Notes in Energy, 92 . Springer Link, Springer Nature Singapore, pp. 522-538. ISBN 2195-1284 (Printed); 2195-1292 (Online)

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2023) Effect of Sn-xCu Solder Alloy onto Intermetallic Formation After Laser Soldering. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang. pp. 869-880.. ISBN 978-981-19-1457-7 (Published)

Muhammad Azri, Muhammed Nor and Jaganathapillai, T. and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and N. A., Abdul Hamid and W. M., Wan Mohamed (2023) Role of human factor for the implementation of the “Vision Zero” concept in railway transport: An overview. In: AIP Conference Proceedings. AIP Conference Proceedings; 5th International Conference on Automotive Innovation and Green Energy Vehicle 2022 (AiGEV 2022) , 05 - 06 Disember 2022 , Langkawi Malaysia. pp. 1-18., 2998 (030005). ISSN 0094-243X (Published)

Muhammad Faez, Mohamad Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi‐solid metal processing: current status and recent development. The International Journal of Advanced Manufacturing Technology, 124. pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Faez Mohamad, Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2023) Grain refinement in semi-solid metal processing: Current status and recent development. International Journal of Advanced Manufacturing Technology, 124 (5-6). pp. 1379-1399. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Muhammad Faisal, Hashim and Norazlianie, Sazali and Zawati, Harun and Norsuhailizah, Sazali and Wan Norharyati, Wan Salleh and Triyanda, Gunawan (2023) Analysis study of the carbon monoxide sensor for vehicle safety system application. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhammad Hanafi, Yusop (2023) Exploring the optimal potential of transient reflection method through mel-frequency ceptrums coefficient and artificial neural network for leak detection and size estimation in water distribution systems. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Fairusham, Ghazali).

Muhammad Hatifi, Mansor and M. S. M., Sani and Mohd Firdaus, Hassan (2023) Eigenfrequency shift of piezoelectric backplate in vibro-acoustic energy harvesting. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10850 -10861. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Nur Arif, Mohamad Asri (2023) Model updating of crash box structures for crashworthiness study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Muhammad Shahruddin, Azmi and Munirah, Mohamad Izham and Muhammad Hilmi, Jalil and Muhammad Hazli, Mazlan (2023) CT-FEA of inhomogeneous lumbar with different loadings of the spinal cage. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (4). 10894 -10905. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Muhammad Syafiq, Idris and Irnie Azlin, Zakaria and Putri Nur Afiqah, Nazari and Wan Ahmad Najmi, Wan Mohamed and Wan Azmi, Wan Hamzah (2023) Performance of hybrid Al2O3:SiO2 W:EG in PEM fuel cell distributor plate. Journal of Mechanical Engineering, 20 (3). pp. 335-354. ISSN 1823-5514. (In Press / Online First) (In Press / Online First)

Muhammmad Rais, Rahim (2023) Development of a non-inertia mass fibre bragg grating accelerometer based on a single diaphragm mechanism and its vibration response analysis. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Firdaus, Hassan).

Muller, Dario Cyril and Selvanathan, Shanmuga Priya and Cuce, Erdem and Kumarasamy, Sudhakar (2023) Hybrid solar, wind, and energy storage system for a sustainable campus : A simulation study. Science and Technology for Energy Transition (STET), 78 (13). pp. 1-12. ISSN 2804-7699. (Published)

Munanday, Anbananthan Pillai and Norazlianie, Sazali and Asogan, Arjun and Ramasamy, Devarajan and Ahmad Shahir, Jamaludin (2023) The Implementation of Transfer Learning by Convolution Neural Network (CNN) for Recognizing Facial Emotions. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 255-276. ISSN 2462-1943. (Published)

Mutra, R. R. and Reddy, D. M. and Amarnath, M. and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani (2023) Artificial neural network-based fault diagnosis of gearbox using empirical mode decomposition from vibration response. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10695-10709. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N

N. M., Maliessa and S. R. A., Idris (2023) Microwave hybrid heating as an alternative method for soldering—A brief review. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 565-577.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

N. N. M., Zawawi and Hamisa, Abdul Hamid and Wan Azmi, Wan Hamzah and Hendrawati, Tri Yuni and Safril, S. (2023) Performance of hybrid electric vehicle air-conditioning using SiO2/POE nanolubricant. Case Studies in Thermal Engineering, 52 (103717). pp. 1-15. ISSN 2214-157X. (Published)

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Mohd Nadzeri, Omar and Nur Aqilah, Othman and M. A., Mohamad Radzi and K. A., Abu Kassim (2023) The effect of motorcycle helmet type on head response in oblique impact. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10786-10797. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. W., Awang and Sakinah, Hisham and D., Ramasamy and K., Kadirgama and Mohd Kamal, Kamaruzzaman (2023) Statistical Approach to the Cellulose Nanocrystal Tribological Behavior on the Piston Liner Contact Using Full Factorial Design (FFD). In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 351-363.. ISBN 978-981-19-4425-3 (Published)

N.M.H.M., Hassan and Nasrul Hadi, Johari and M.N., Omar and M.H.A., Hassan and Z., Ahmad@Manap (2023) Head injury evaluation strategy for sepak takraw ball heading: a systematic review. In: Engineering Technology International Conference (ETIC 2022) , 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. pp. 484-492.. ISBN 978-1-83953-782-0 (Published)

Najafi Khaboshan, Hasan and Jaliliantabar, F. and Abdullah, A. A. and Panchal, Satyam (2023) Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system. Applied Thermal Engineering, 227 (120320). pp. 1-12. ISSN 1359-4311. (Published)

Nelfiyanti, N. and Nik Mohamed Zaki, Nik Mohd Nasir and M. F. F., Ab Rashid (2023) Integration of QRM and ergonomics in the design of a framework in identification complaints among automotive assembly line workers. Journal of Engineering and Technology (JET), 14 (1). pp. 11-28. ISSN 2180-3811. (Published)

Nik Mohd Haikal, Mohamed Hassan and Nasrul Hadi, Johari and Mohd Hasnun Ariff, Hassan and Idris, Mat Sahat and Mohd Nadzeri, Omar and Zulkifli, Ahmad@Manap (2023) Experimental Investigation of Mechanical Properties of Sepak Takraw Ball Based on Different Ball Orientation. In: 1st International Conference on Innovation and Technology in Sports, ICITS 2022 , 14 November - 15 November 2022 , Kuala Lumpur, Malaysia. pp. 203-211. (293639). ISBN 978-981-99-0297-2 (Published)

Noor Am Zura, Abdullah (2023) Optimisation of car crash box finite element model for crashworthiness analysis using model updating and factorial design method. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Norkhairani, Abdul Rawi and Abd. Rasid, Mamat and Maizan, Mat Amin and Muhamad, Mat Noor (2023) Aplikasi perbincangan maya sebagai alat kelangsungan pekerjaan semasa PKP. In: Pandemik Covid-19 dan perubahan landskap kehidupan masyarakat. Penerbit UMP, pp. 13-27. ISBN 978-967-2831-80-8

Norkhizan, A. M. and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi (2023) Experimental investigation of a diesel engine using waste plastic oil blends. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 133-143.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Norwazli, Abdul Wahab and Low, Yong Hong (2023) Improvement of business performance in small-medium enterprise (SME) : Evidence from a sanitaryware company in Malaysia. Journal of Governance and Integrity (JGI), 6 (1). pp. 470-482. ISSN 2600-7479. (Published)

Nugroho, A. and Rizalman, Mamat and Xiaoxia, J. and Bo, Z. and Mohd Faizal, Jamlos and Mohd Fairusham, Ghazali (2023) Performance enhancement and optimization of residential air conditioning system in response to the novel FAl2O3-POE nanolubricant adoption. Heliyon, 9 (10). pp. 1-19. ISSN 2405-8440. (Published)

Nur Aziera, Nur Aziera and Mebrahitom, A. and Azmir, Azhari and Saptaji, Kushendarsyah (2023) Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 657-663.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

Nur Faeeza, Abdul Halim (2023) Parameter study on low temperature vacuum drying with induced nucleation boiling for dewatering stingless bees honey. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohamad Firdaus, Basrawi).

Nur Hazreen, Mohd Hasni and Akmal Asyraf, Mior Azalian and Tuty Asmawaty, Abdul Kadir and Mohd Azrul Hisham, Mohd Adib (2023) Serious “human papillomavirus vaccine” game for Malaysian adolescents : Development and preliminary study. International Journal of Public Health Science, 12 (1). pp. 82-90. ISSN 2252-8806. (Published)

Nur Khaleeda, Romli (2023) Effect of geometrical size and number of core on bending behaviour of web-core sandwich structure. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Ruzaimi, Mat Rejab).

Nurazima, Ismail (2023) Lamb wave based structural health monitoring using fibre bragg grating-based intrinsic fabry-perot interferometer sensor. PhD thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Mohd Hafizi, Zohari).

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and Sudhakar, Kumarasamy and Said, Zafar and Pandey, Adarsh Kumar (2023) Copper oxide/polyaniline nanocomposites-blended in palm oil hybrid nanofluid : Thermophysical behavior evaluation. Journal of Molecular Liquids, 375 (121303). pp. 1-16. ISSN 0167-7322. (Published)

Nurizzatul Atikha, Rahmat and Kamil Khalili, Haji Abdullah and Khairun Adhani, Khairunizam (2023) Natural Ventilation in Traditional Malay House A Study of Flow Pattern by an Enhanced Smoke Wire Technique. In: Energy and Environment in the Tropics. Lecture Notes in Energy, 92 . Springer, pp. 289-303. ISBN 978-981-19-6687-3

Nurizzatul Atikha, Rahmat and M. R., Ramli and M. H. C., Hassan and K. K. H., Abdullah and K. A., Khairunizam (2023) Enhanced smoke wire technique with control dripping valve in a small scaled quasi-atmospheric boundary layer wind tunnel. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 611 -627.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Nurul, Izzati and Sheikh Ahmad, Zaki and Rijal, Hom Bahadur and Rey, Jorge Alfredo Ardila and Hagishima, Aya and Nurizzatul Atikha, Rahmat (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students’ activity rooms in a university building in malaysia. Buildings, 13 (36). pp. 1-25. ISSN 2075-5309. (Published)

Nurul Amiratul, Johari (2023) Interaction of self-healing epoxy coating and microencapsulated inhibitor for the corrosion protection of magnesium alloys. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Juliawati, Alias).

Nurziana, Kong (2023) Effect of graphene nanoreinforcement on moisture absorption and mechanical properties of epoxy adhesive joint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nur Zalikha, Khalil).

P

Pandey, Adarsh Kumar and Rajamony, Reji Kumar and Samykano, Mahendran and Buddhi, D. and Tyagi, Vineet Veer (2023) Investigation of thermal performance and chemical stability of metal infused salt hydrate phase change material for thermal energy storage. In: IOP Conference Series: Earth and Environmental Science. International Postgraduate Conference for Energy Research 2022, IPCER 2022 , 18 - 19 December 2022 , Hybrid, Kuala Lumpur. pp. 1-7., 1261 (012015). ISSN 1755-1307 (Published)

Parvez, M. S. and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Current advances in fabric-based airbag material selection, design and challenges for adoption in futuristic automobile applications. Materials Today: Proceedings. p. 123. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Parvez, Md. Shohan and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Surface morphology and thermogravimetric analysis of polyaniline (PANI) incorporated cotton fabric. Energy Engineering, 121 (1). pp. 1-12. ISSN 0199-8595. (Published)

Parvez, Md. Shohan and Rahman, Md. Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Electrochemical characterization and joule heating performance of polyaniline incorporated cotton fabric. Physics and Chemistry of the Earth, Parts A/B/C, 129. pp. 1-7. ISSN 1474-7065. (Published)

Pathak, Sudhir Kumar and Tyagi, Vineet Veer and Chopra, Kapil and Reji Kumar, Rajamony and Pandey, Adarsh Kumar (2023) Integration of emerging PCMs and nano-enhanced PCMs with different solar water heating systems for sustainable energy future: A systematic review. Solar Energy Materials and Solar Cells, 254 (112237). pp. 1-43. ISSN 0927-0248. (Published)

Paul, John and Mahendran, Samykano and Pandey, Adarsh Kumar and K., Kadirgama and Tyagi, V. V. (2023) Nano engineered paraffin-based phase change material for building thermal management. Buildings, 13 (4). pp. 1-6. ISSN 2075-5309. (Published)

Prayogo, Wisnu and Siregar, Januar Parlaungan and Soewondo, Prayatni and Nasution, Zulkifli and Hanami, Zarah Arwieny and Ikhwali, M. Faisi and Estim, Abentin and Suryawan, I. Wayan Koko (2023) The investigation on mineral wool performance as a potential filter to remove tss in cikapayang river, east jawa, indonesia. Environment and Natural Resources Journal, 21 (101936). pp. 1-10. ISSN 1686-5456. (Published)

Q

Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Shukur, Hj Abu Hassan and Hu, Haichao and Mohammad, Azeem and Yunus Nasution, Ahmad (2023) Impact behaviour of spherical-roof contoured-core (SRCC) sandwich panel under the low-velocity impact (LVI) : A numerical investigation. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

R

Rahmad Doni, Widodo and Rusiyanto, . and Wahyudi, . and Melisa Kartika Sari, . and Deni Fajar Fitriyana, . and Siregar, Januar Parlaungan and Cionita, Tezara and Da Silva Guterres, Natalino Fonseca and Da Silva, Mateus De Sousa and Jamiluddin, Jaafar (2023) Effect of compression molding temperature on the characterization of asbestos-free composite friction materials for railway applications. AIMS Materials Science, 10 (6). pp. 1105-1120. ISSN 2372-0484. (Published)

Rai, Rahool and Larik, Ali Raza and Ahmed, Kashif and Kumaramasy, Sudhakar and Zaidi, Asad Ali (2023) Comparative Analysis of finned absorber plate with and without black paint in Solar Air Heater. In: 2023 4th International Conference on Computing, Mathematics and Engineering Technologies: Sustainable Technologies for Socio-Economic Development, iCoMET 2023 , 17-18 March 2023 , Sukkur. pp. 1-4.. ISBN 979-835033531-6 (Published)

Rajamony, R. K. and Mahendran, Samykano and Pandey, A. K. and Babu, S. Ramesh and Noor, M. M. and Devarajan, R. and Paw, J. K. Siaw and Natarajan, S. K. (2023) Investigation on thermophysical properties of multi-walled carbon nanotubes enhanced salt hydrate phase change material. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10595-10605. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Rajan, K. and Kottasamy, A. and Mogan, J. and Sandanamsamy, L. and M., Samykano and K., Kadirgama and Wan Sharuzi, Wan Harun (2023) Preliminary investigation on the tensile properties of FDM printed PLA/copper composite. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 351 -361., 882. ISSN 1876-1100 ISBN 978-981191576-5 (In Press / Online First) (In Press / Online First)

Rajan, Kumaresan and Mahendran, Samykano and Kumaran, Kadirgama and Adarsh, Kumar Pandey and Md Mustafizur, Rahman (2023) Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Ramadhan, Anwar Ilmar and Meta Sari, Alvika and Saptaji, Kushendarsyah and Rahardja, Istianto Budhi and Umar, Efrizon and Perdana, Satrio Yudho and Wan Azmi, Wan Hamzah (2023) Characterization and stability of ZrO2-SiO2 nanofluids from local minerals Indonesia as green nanofluids to application radiator cooling system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). 126 -140. ISSN 2289-7879. (Published)

Reddy, Vennapusa Jagadeeswara and Hariram, N. P. and Maity, Rittick and Mohd Fairusham, Ghazali and Sudhakar, Kumarasamy (2023) Sustainable E-fuels: Green hydrogen, methanol and ammonia for carbon-neutral transportation. World Electric Vehicle Journal, 14 (12). pp. 1-29. ISSN 2032-6653. (Published)

Reji Kumar, Rajamony (2023) Performance evaluation of photovoltaic thermal systems using functionalized multi-walled carbon-based nano-enhanced phase change material. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, Samykano).

Riyadi, Ahmad and Kholil, Ahmad and Siregar, Januar Parlaungan and Dwiyati, Siska Titik and Pratama, Danang Budi and Setiawan, Ari and Syaefuddin, Eko Arif (2023) Characteristics of natural fiber composites materials reinforced with aluminum and copper powder for the performance of automatic motorcycle clutch pad. Automotive Experiences, 6 (2). pp. 259-272. ISSN 2615-6202. (Published)

Rosdi, Daud and Mas Ayu, Hassan and R., Norizah and A. K., Nasution (2023) Deformation Behaviour of a High Carbon Co–Cr–Mo Medium-Entropy Alloy via Thermal Oxidation. In: International Manufacturing Engineering Conference & The Asia Pacific Conference on Manufacturing Systems , 27-28 October 2022 , Surakarta, Indonesia. pp. 649-656.. ISSN 2195-4356 ISBN 978-981-99-1244-5 (Published)

Ruhil Amal, Azmuddin and Ainul Azmin, Md Zamin and Hamizah, Zahari and Rahmah, Mokhtar and Fatin Aliana, Mohd Radzi and Daing Nafiz, Idris (2023) Analysing tertiary students’ reading proficiency of CEFR aligned texts via online discussion forum in a learning management system. Asian Journal of University Education, 19 (1). pp. 121-132. ISSN 1823-7797. (Published)

Rusli, Majuma and Mohamad Heerwan, Peeie and Ondong, Kerisvin and Othman, Abu Hassan (2023) Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains. Automotive Experiences, 6 (2). pp. 234-244. ISSN 2615-6202. (Published)

S

S. N. A., Rosli and Norhaida, Ab. Razak and M. R., Mahazar and N. A., Alang (2023) Creep life prediction of P91 steel using omega method. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 303-314.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

S. S., Amirnuddin and Muhamad Soffi, Manda and Shukur, Abu Hassan and Mat Uzir, Wahit and Mohd Ruzaimi, Mat Rejab and Joseph Selvi, Binoj Selvi and Ahmad Ilyas, Rushdan (2023) Compressive behaviour of tin slag polymer concrete confined with fibre reinforced polymer composites exposed to tropical weathering and aggressive conditions. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (Published)

S. Z. A., Sakinah and Wan Azmi, Wan Hamzah and J., Alias (2023) Corrosion Performance of Nanopaint for Automotive Application. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3 - 5 Nov 2021 , Virtual Conference. pp. 299-308.. ISSN 2195-4356 ISBN 978-981-19-4425-3 (Published)

Safril, . and Wan Azmi, Wan Hamzah and N. N. M., Zawawi and A. I., Ramadhan (2023) Tribology performance of TiO2-SiO2/PVE nanolubricant at various binary ratios for the automotive air-conditioning system. Automotive Experiences (AE), 6 (3). pp. 485-496. ISSN 2615-6636. (Published)

Safwan, Shalbi (2023) Study of boron neutron capture therapy components at thermal column for nuclear reactor. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazlianie, Sazali).

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and N. W., Awang and Mohd Kamal, Kamaruzzaman (2023) Prediction and Optimization of Thermophysical Properties of Hybrid Cellulose Nanocrystal-Copper (II) Oxide Nanolubricant for Tribology Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress. 2nd Energy Security and Chemical Engineering Congress (ESChE 2021) , 3-5 November 2021 , Universiti Malaysia Pahang (Virtual Conference). pp. 325-340.. ISBN 978-981-19-4425-3 (Published)

Samykano, Mahendran (2023) Hybrid photovoltaic thermal systems : Present and future feasibilities for industrial and building applications. Buildings, 13 (1950). pp. 1-32. ISSN 2075-5309. (Published)

Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Wan Sharuzi, Wan Harun and Saidur, Rahman Md (2023) Assessment of thermophysical properties of hybrid nanoparticles [Graphene Nanoplatelets (GNPs) and Cellulose Nanocrystal (CNC)] in a base fluid for heat transfer applications. International Journal of Thermophysics, 44 (55). pp. 1-25. ISSN 0195-928X. (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Praja, Arief Kusuma Among (2023) Project delivery systems : The partnering concept in integrated and non-integrated construction projects. Sustainability (Switzerland), 15 (86). pp. 1-14. ISSN 2071-1050. (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Tamin, Rizal Zainuddin and Praja, Arief Kusuma Among and Dewi, Maya Puspita (2023) Challenge and awareness for implemented integrated project delivery (IPD) in indonesian projects. Buildings, 13 (262). pp. 1-13. ISSN 2075-5309. (Published)

Sarmilaah Dewi, Subramaniam and Siti Hajar, Abd Rahim and Luqman, Abdul Halim and Firdaus, Basrawi and Nurul Aini, Mohd Azman (2023) Study on bee bread extracts as active ingredients in SGC-Active film for food packaging application. Materials Today: Proceedings, 86. pp. 1-8. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Sarmilaah Dewi, Subramaniam and Wan Amnin, Wan Yahaya and Nurul Aini, Mohd Azman and Zatul Iffah, Mohd Arshad and Firdaus, Basrawi (2023) Sustainable Carrageenan/Nanocomposite Films Incorporated with Optimized Zingiber officinale Extracts for Active Packaging Systems. Chemical Engineering and Technology. (In Press / Online First) (In Press / Online First)

Shahed, Chowdhury Ahmed and Faiz, Ahmad and Günister, Ebru and Farhana, Mohd Foudzi and Ali, Saad and Malik, Khurshid and Wan Sharuzi, Wan Harun (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys : A review. Journal of Magnesium and Alloys. pp. 1-21. ISSN 2213-9567. (Published)

Shakil, Usaid Ahmed and Mohd Ruzaimi, Mat Rejab and Norazlianie, Sazali and Shukur, Abu Hassan and Mohd Yazid, Yahya and Ma, Quanjin (2023) Damage characterisation of amine-functionalized MWCNT reinforced carbon/epoxy composites under indentation loading. Journal of Materials Research and Technology, 24. pp. 6713-6729. ISSN 2238-7854. (Published)

Sharul Nizam, Turiman (2023) Influence of studs shape and different pitch conditions on rugby athlete sprinting performance. Masters thesis, Universiti Malaysia Pahang Al-Sultan Abdullah (Contributors, Thesis advisor: Nasrul Hadi, Johari).

Shehzad, Aamir and Arslan, A. and Rehman, Fahad Ur and Quazi, Moinuddin Mohammed and Butt, Shahid Ikram Ullah and Jamshaid, Muhammad Usman (2023) Corrosion behavior of copper, aluminium, and stainless steel 316L in chicken fat oil based biodiesel-diesel blends. Sustainable Energy Technologies and Assessments, 56 (103089). pp. 1-9. ISSN 2213-1388. (Published)

Siaw Paw, Johnny Koh and Kiong, Tiong Sieh and Mohd Kamal, Kamarulzaman and Abdul Adam, Abdullah and Sakinah, Muhamad Hisham and Kadirgama, Kumaran and Devarajan, Ramasamy and Yaw, Chong Tak and Ahmad Fitri, Yusop and Yusaf, Talal F. and A Dhahad, Hayder Abed and Benedict, Foo (2023) Advancing renewable fuel integration : A comprehensive response surface methodology approach for internal combustion engine performance and emissions optimization. Heliyon, 9 (e22238). pp. 1-25. ISSN 2405-8440. (Published)

Siregar, Januar Parlaungan and Al Ichlas, Imran and Rozanna, Dewi and Janviter, Manalu and Johni Jonatan, Numberi and Apolo, Safanpo (2023) The incorporation of crumb rubber in construction reinforcement: A review. Journal Of Innovation And Technology, 2023 (35). pp. 1-10. ISSN 2805-5179. (Published)

Siregar, Januar Parlaungan and Dewi, Rozanna and Imran, Al Ichlas (2023) Tensile properties of wood sawdust fibre reinforced epoxy composites. Journal Of Innovation And Technology, 2023 (25). pp. 1-7. ISSN 2805-5179. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Mohd Mustafa, Al Bakri Abdullah and Aiman, Mohd Halil and Amira Qistina Syamimi, Zaifuddin and Mahadzir, Ishak and Sandu, Andrei Victor and Baltatu, Mădălina Simona and Vizureanu, Petrica (2023) Effectiveness of dimple microtextured copper substrate on performance of Sn-0.7Cu solder alloy. Materials, 16 (96). pp. 1-14. ISSN 1996-1944. (Published)

Siti Haryani, Tomadi and Nor Farah Huda, Abd Halim and Mas Ayu, Hassan and Rosdi, Daud and Muhammad Ariff, Zakaria (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Lecture Notes in Mechanical Engineering; 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022 , 9-10 August 2022 , Kuala Lumpur. pp. 637-643. (294689). ISSN 2195-4356 ISBN 978-981199508-8 (Published)

Siti Rabiatull Aisha, Idris (2023) 14 UMPSA students participate in Introduction to Underwater Welding Programme. UMPSA News .

Siti Rabiatull Aisha, Idris (2023) UMPSA anjur Program Jurulatih Renang Tahap 1 dan Penyelamatan Di Air. UMPSA News .

Siti Rabiatull Aisha, Idris (2023) UMPSA organises Level 1 Swimming Coach and Water Rescue Programme. UMPSA News .

Siti Rabiatull Aisha, Idris and M. N., Mazelan (2023) Effect of microwave hybrid heating on mechanical properties and microstructure of Sn3.0Ag0.5Cu/Cu solder joints. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sofiah, A. G. N. and Mahendran, Samykano and Sudhakar, K. and Said, Zafar and Pandey, A. K. (2023) Copper oxide/polyaniline nanocomposites-blended in palm oil hybrid nanofluid: Thermophysical behavior evaluation. Journal of Molecular Liquids, 375 (121303). pp. 1-16. ISSN 0167-7322. (Published)

Sofiah, A. G. N. and Pasupuleti, Jagadeesh and Samykano, Mahendran and N.F., Sulaiman and Z.A.C., Ramli and Reji Kumar, R. and Shahabuddin, S. and Pandey, A. K. and Tiong, S. K. and Koh, Siaw Paw (2023) Multi-objective optimization and price performance factor evaluation of polyaniline nanofibers-palm oil nanofluids for thermal energy storage application. Case Studies in Thermal Engineering, 52 (103673). pp. 1-19. ISSN 2214-157X. (Published)

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) biocomposites prepared via cold isostatic pressing. Polymers, 15 (559). pp. 1-17. ISSN 2073-4360. (Published)

Subramonian, Sivarao and Kadirgama, Kumaran and Mahdi Al-Obaidi, Abdulkareem Sh. and Mohd Shukor, Mohd Salleh and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan (2023) Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts. Engineering, Technology & Applied Science Research, 13 (5). pp. 11677-11684. ISSN 1792-8036. (Published)

Sugumaran, Luvindran and Mohd Nashrul, Mohd Zubir and Newaz, Kazi Md Salim and Tuan, Zaharinie and Suazlan, Mt Aznam and Aiman, Mohd Halil (2023) Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures. In: IOP Conference Series: Earth and Environmental Science. 6th International Conference on Clean Energy and Technology 2023, CEAT 2023 , 7 - 8 June 2023 , Hybrid, Penang. pp. 1-7., 1281 (012062). ISSN 1755-1307 (Published)

Suwandi, Agri and Rachmawanto, Muhammad Pillar and Libyawati, Wina and Siregar, Januar Parlaungan (2023) The development of exhaust fan housing with ceiling mounting for high rise buildings by using DFMA. Journal of Applied Engineering and Technological Science, 4 (2). pp. 895-907. ISSN 2715-6087. (Published)

Syafiq Ahmad, Abdul Aleem and Mohd Fadhlan, Mohd Yusof and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak (2023) Mel-frequency cepstral and spectral flux analysis of the acoustic signal for real-time status monitoring of laser cleaning. Materials Research Express, 10 (106506). pp. 1-23. ISSN 2053-1591. (Published)

Syazwan Izharuddin, Mohamad Sabri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Wan Sharuzi, Wan Harun and K., Kadirgama and D., Ramasamy (2023) Investigation on water quality for farmed aquatic species by IoT monitoring system. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 317-327. ISSN 2462-1943. (Published)

Syazwana, Sapee (2023) The effect of oxygenated turpentine and alpha pinene oil additives in diesel fuel on the performance, combustion, and emissions in diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

T

Taha, Zahraa Khduair and Yaw, Chong Tak and Koh, Siaw Paw and Tiong, Sieh Kiong and Kadirgama, Kumaran and Benedict, Foo and Tan, Jian Ding and Balasubramaniam, Yogendra A.L. (2023) A survey of federated learning from data perspective in the healthcare domain : Challenges, methods, and future directions. IEEE Access, 11. pp. 45711-45735. ISSN 2169-3536. (Published)

Tan, S. P. and M. A., Ramlan and M. S., Shaari and Takahashi, A. and Mohd Akramin, Mohd Romlay (2023) Microstructural and mechanical characterization of AlSi10Mg additively manufactured material using direct metal laser sintering technique. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 349 -360.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Tarek, Abedin and Koh, Siaw Paw and Yaw, Chong Tak and Phing, Chen Chai and Tiong, Sieh Kiong and Tan, Jian Ding and Kharudin, Ali and Kadirgama, Kumaran and Benedict, Foo (2023) Vibration signal for bearing fault detection using random forest. In: Journal of Physics: Conference Series; International Conference on Emerging Electronic and Automation Technology 2022, ICEEAT 2022 , 10-11 December 2022 , Virtual, Online. pp. 1-21., 2467 (012017). ISSN 1742-6588 (Published)

Tulus, . and Rahman, Md Mustafizur and Sutarman, . and Muhammad Romi, Syahputra and Marpaung, Tulus Joseph and Marpaung, Jonathan Liviera (2023) Computational assessment of wave stability against submerged permeable breakwaters: A hybrid finite element method approach. Mathematical Modelling of Engineering Problems, 10 (6). pp. 1977-1986. ISSN 2369-0739. (Published)

Turiman, Sharul Nizam and Ahmad, Z. and Johari, N. H. (2023) Preliminary study on the influence of boot studs on rugby players’ sprinting performance. In: Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 61 -71., 882. ISSN 1876-1100 ISBN 978-981191576-5 (Published)

U

Ukasyah Zulfaqar, Shahrulakmar and Mohd Nadzeri, Omar and Nasrul Hadi, Johari (2023) Brief review on recent advancement of computational analysis on hemodynamics in peripheral artery disease. In: Technological Advancement in Instrumentation & Human Engineering. Lecture Notes in Electrical Engineering; 6th International Conference on Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. pp. 555-572., 882. ISSN 1876-1100 ISBN 978-981191576-5 (Published)

Ukasyah Zulfaqar, Shahrulakmar and Nasrul Hadi, Johari and Muhammad Firdaus, Mohd Fauzi and Juhara, Haron and Nadarajan, Chandran and Mohd Nadzeri, Omar (2023) Numerical approach for the evaluation of hemodynamic behaviour in peripheral arterial disease : A systematic review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 95-117. ISSN 2289-7879. (Published)

Ullah, Wasif and Mohd Fadzil Faisae, Ab Rashid and Muhammad Ammar, Nik Mu’tasim (2023) Modeling and optimization of cost-based hybrid flow shop scheduling problem using metaheuristics. International Journal of Global Optimization and Its Application, 2 (4). pp. 244-254. ISSN 2948-4030. (Published)

Usman, Fahad and Kamarul Hawari, Ghazali and Razali, Muda and Dennis, John Ojur and Ibnaouf, Khalid Hassan and Aldaghri, Osamah A. and Alsadig, Ahmed and Nasrul Hadi, Johari and Rajan, Jose (2023) Detection of kidney complications relevant concentrations of ammonia gas using plasmonic biosensors : A review. Chemosensors, 11 (119). pp. 1-24. ISSN 2227-9040. (Published)

Usman, Fahad and Kamarul Hawari, Ghazali and Razali, MudaJohari, and Nasrul Hadi, Johari and Dennis, John Ojur and Tamam, Nissren M. and Sulieman, Abdelmoneim Adam Mohamed and Ji, Yuanfa (2023) Magnetoresistance and magneto-plasmonic sensors for the detection of cancer biomarkers : A bibliometric analysis and recent advances. Sensors and Actuators Reports, 6 (100172). pp. 1-17. ISSN 2666-0539. (Published)

V

Vaka, Mahesh and Mohammad, Khalid and Paul, John (2023) A review of different models, mechanisms, theories and parameters in tuning the specific heat capacity of nano-phase change materials. Journal of Energy Storage, 72 (108678). pp. 1-16. ISSN 2352-152X. (Published)

W

Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and K., Kadirgama and D., Ramasamy and Mahendran, Samykano and Ali, M. Y. (2023) Exploring surfactant-enhanced stability and thermophysical characteristics of water-ethylene glycol-based Al2O3-TiO2 hybrid nanofluids. WSEAS Transactions on Heat and Mass Transfer, 18. 195 -206. ISSN 2224-3461. (Published)

Wan Muhammad Noor Sarbani, Mat Daud and Mohd Adnin, Hamidi and Rizalman, Mamat and Daing Mohamad Nafiz, Daing Idris (2023) A prediction of graphene nanoplatelets addition effects on diesel engine emissions. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10758-10766. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Wan Nurlisa, Wan Ahmad and Mohd Azrul Hisham, Mohd Adib and Irdayanti, Mat Nashir and Txi, Mon Redee Sut and Fatin Nurfatehah, Mat Salleh and Tang, Jing Rui (2023) Anxiety status of junior archers in COVID-19 during training isolation period towards the shooting performance. International Journal of Public Health Science, 12 (1). pp. 361-370. ISSN 2252-8806. (Published)

Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Devarajan, R. and Norazlianie, Sazali (2023) A route to a high-impact journal article: The most functional strategy in modern history. Penerbit UMPSA, Pahang. ISBN 978-967-2831-95-2

Wan Sharuzi, Wan Harun and Mohd Fairusham, Ghazali and Norazlianie, Sazali and Mohamad Huzaimy, Jusoh and Shahrul Niza, Mokhatar (2023) Steps to become a professional engineer in Malaysia. Penerbit UMPSA, Pahang. ISBN 9789672831914

Wayan Adiyasa, I. and Mohd Azri Hizami, Rasid and Wayan Warsita, I. and Arifin, Zainal and Dwipayana, Arif Devi and Suteja, Rai Pramesti (2023) Identification of computation of solar and wind energy potential for off-grid electric motorcycle battery charging stations. In: Proceedings - International Conference on Smart-Green Technology in Electrical and Information Systems, ICSGTEIS. 2023 International Conference on Smart-Green Technology in Electrical and Information Systems, ICSGTEIS 2023 , 2 - 4 November 2023 , Hybrid, Bali. pp. 1-6. (197175). ISBN 979-835038282-2 (Published)

Widodo, Rahmat Doni and Rusiyanto, R. and Athoillah, A. and Setiadi, Rizki and Bahatmaka, Aldias and Darsono, Febri Budi and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Ismail, Rifky and Bayuseno, Athanasius P. and Irawan, Agustinus Purna and Guterres, N. F.D.S. (2023) Investigating the effect of molasses concentrations on the characterization of evaporation boat waste for crucible materials candidate. ARPN Journal of Engineering and Applied Sciences, 18 (12). pp. 1354-1364. ISSN 1819-6608. (Published)

X

X. H., Ma and N. A., Abd Razak (2023) The Change of Solidification Parameters on Hypoeutectic Aluminum-Silicon Alloy Under Different Cooling Rates. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021 , 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 263-278.. ISBN 978-981-19-1457-7 (Published)

Y

Yadav, A. and Mahendran, Samykano and Pandey, A. K. and Tyagi, V. V. and Devarajan, R. and Sudhakar, K. and Noor, M. M. (2023) A systematic review on bio-based phase change materials. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (2). pp. 10547-10558. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Yadav, Aman and Samykano, Mahendran and Pandey, A. K. and Aljafari, Belqasem and Tyagi, V. V. (2023) Synthesis and characterization of polyethylene glycol-polymethyl methacrylate infused multiwalled carbon nanotube nanocomposite as an efficient thermal energy storage. Materials Today Communications, 37 (107472). ISSN 2352-4928. (Published)

Yap, Suk Wy and Norhasnidawani, Johari and Saiful Amri, Mazlan and Aqida, S. N. and Arifin, Rizal and Noor Azlina, Hassan and Mohd Aidy Faizal, Johari (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854. (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanofluids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)

Yousefi, Elnaz and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2023) Exploring the temperature-dependent thermal stability of nano-enhanced phase change materials: An experimental study using eicosane as the base material. Materials Today: Proceedings. p. 79. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Yousefi, Elnaz and Najafi Khaboshan, Hasan and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2023) The effect of different enclosure materials and NePCMs on performance of battery thermal management system. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Material Forum 2022. , 20 July 2022 , Universiti Malaysia Pahang, Pekan, Malaysia,. pp. 1-9., 75 (1). ISSN 2214-7853 (Published)

Z

Zeol, H. and M. Z., Sulaiman and Hui, H. Z. and H., Ismail and Okawa, T. (2023) Quenching heat transfer characteristics of copper rod in saturated and various subcooled condition. In: Lecture Notes in Mechanical Engineering; 6th International Conference in Mechanical Engineering Research, ICMER 2021 , 26 - 27 October 2021 , Virtual, Online. 361 -377.. ISSN 2195-4356 ISBN 978-981191456-0 (Published)

Zul, M. H. and Ishak, M. and Nasir, R. M. and Aiman, M. H. and Quazi, M. M. (2023) Effect of laser-textured surface of Ti6Al4V on frictional wear behavior. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (1). pp. 10165-10174. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)