Items where Division is "Faculty of Engineering Technology" and Year is 2017

Article

A., Jamaludin and C. K. M., Faizal (2017) Autoclave-Assisted Synthesis of Silver Nanoparticles using Metroxylon Sagu for Antibacterial Application. Indian Journal of Science and Technology, 10 (6). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

A. H., Hazrin and Z., Maryam and A., Hizrri and Norhidayah, Abdull and Niza, Samsuddin and M. A., Mohd Shukri (2017) Occupancy implications on Indoor Air Quality (IAQ) in selected primary school classrooms around Kuantan, Pahang. Malaysian Journal of Public Health Medicine, Special (1). pp. 94-105. ISSN 1675-0306. (Published)

Abdulla Fairuzullah, Ahmad Tajuddin and Noraziah, Ahmad and Abdalla, Ahmed N. (2017) Overview Between Clustering and Load Balancing. Advanced Science Letters, 23 (11). pp. 11109-11113. ISSN 1936-6612. (Published)

Alfarra, Hossam Adden and Alsibai, Mohammad Hayyan (2017) Wireless Smart Sensor Network for Flood Management Optimization. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X. (Published)

Aminuddin, Azfar and Mohd Akmal, Azhar (2017) Development and Evaluation of Goat Milk Tablet Using Dry Granulation Techniques for Nutraceutical Purposes. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X. (Published)

Asif, Muhammad and Hai, Faisal I. and Singh, Lakhveer and Price, William E. and Nghiem, Long D. (2017) Degradation of Pharmaceuticals and Personal Care Products by White-Rot Fungi - A Critical Review. Current Pollution Reports, 3 (2). pp. 88-103. ISSN 2198-6592. (Published)

Atnaw, Samson M. and Shaharin, A. Sulaiman and Singh, Lakhveer and Zularisam, A. W. and Wan Faizal, Wan Ishak (2017) Modeling and Parametric Study for Maximizing Heating Value of Gasification Syngas. BioResources, 12 (2). pp. 2548-2564. ISSN 1930-2126 (print); 1930-2126 (online). (Published)

Azizan, Ramli and Mohamad Ezuan, Abdul Jalil (2017) Addressing the Practice of Safety Management in Halal Industry - An Overview and A Step Towards Sustainable Cooperation. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-15. ISSN 2289-697X. (Published)

Baridula, Ravinder Reddy and Ramaraju, Ramgopal Varma and C. K. M., Faizal and Abdullah, Ibrahim (2017) Effect of Groove Size on Mechanical Properties and Microstructure Due to Reinforcement Addition in Friction Stir Welded Dissimilar Alloys. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5671-5676. ISSN 1819-6608. (Published)

Damhuji, Rifai and Abdalla, Ahmed N. and Ramdan, Razali and Kharudin, Ali and Faraj, Moneer A. (2017) An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design. Sensors, 17 (3). pp. 1-24. ISSN 1424-8220. (Published)

Deshmukh, Vaibhav N. and Radhakrishnan, S. and Kulkarni, R. R. (2017) Investigations on Thermal Conductivity, Heat Transfer Coefficient and Viscosity of Graphite Nanoparticle Dispersed Nanofluid. Journal of Nanofluids, 6 (6). pp. 1008-1016. ISSN 2169-432X (Print); 2169-4338 (Online) . (Published)

Engku Nadia, Engku Mat Nasir and Fatinah, Ab Rahman and Syarifah, Abd Rahim and Raihana Z., Edros and Nornizar, Anuar (2017) Preliminary Study on Operating Parameters toward the Metastable Zone-Width of Carbamazepine Co-Crystal. Indian Journal of Science and Technology, 10 (7). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Ezrin Hani, Sukadarin and Junaidah, Zakaria (2017) Musculoskeletal Disorder among Municipal Solid Waste Collectors. Asia Pacific Environmental and Occupational Health Journal , 3 (1). pp. 28-32. ISSN 2462 -2214. (Published)

Ezrin Hani, Sukadarin and Junaidah, Zakaria (2017) Preliminary study of musculoskeletal complaints and ergonomic risk factors among catering workers. Asia Pacific Environmental and Occupational Health Journal , 3 (1). pp. 39-43. ISSN 2462 -2214. (Published)

Faraj, Moneer A. and Abdalla, Ahmed N. and Fahmi, Samsuri and Damhuji, Rifai and Kharudin, Ali (2017) Investigate of the Effect of Width Defect on Eddy Current Testing Signals Under Different Materials. Indian Journal of Science and Technology, 10 (2). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Hanida, Abdul Aziz and Mohamad Rizza, Othman and Azmi, Mohd Shariff and Tan, Lian See (2017) Application of Analytical Hierarchy Process (AHP) in Prioritizing HAZOP Analysis for Pilot Plant. Chemical Engineering Research Bulletin, 19 (Special). pp. 87-95. ISSN 0379-7678 (Print); 2072-9510 (Online). (Published)

Hashim, Yasir (2017) A New Approach for Dimensional Optimization of Inverters in 6T-Static Random-Access Memory Cell Based on Silicon Nanowire Transistor. Journal of Nanoscience and Nanotechnology, 17 (2). pp. 1061-1067. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

Ijeomah, Geoffrey and Fahmi, Samsuri and Mohamad Adzhar, Md Zawawi and Obite, Felix (2017) Carbon Nanotube-Graphene hybrid: Recent Synthesis Methodologies and Applications. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-20. ISSN 2289-697X. (Published)

Ishak, M.F. and Muhammad Farhan, Zolkepli (2017) Exploration of Method for Slope Stabilization Influenced by Unsaturated Soil. Science International, 29 (1). pp. 105-108. ISSN 1013-5316. (Published)

Islam, M. Amirul and Chee, Wai Woon and Ethiraj, Baranitharan and Cheng, C. K. and Yousuf, Abu and Khan, Maksudur R. (2017) Correlation of Power Generation With Time-Course Biofilm Architecture Using Klebsiella Variicola In Dual Chamber Microbial Fuel Cell. International Journal of Hydrogen Energy, 42 (41). pp. 25933-25941. ISSN 0360-3199. (Published)

Islam, M. Amirul and Karim, Ahasanul and Chee, Wai Woon and Ethiraj, Baranitharan and Cheng, C. K. and Yousuf, Abu and Khan, Maksudur R. (2017) Augmentation of Air Cathode Microbial Fuel Cell Performance using Wild Type Klebsiella Variicola. RSC Advances, 7 (8). pp. 4798-4805. ISSN 2046-2069. (Published)

Islam, M. Amirul and Woon, Chee Wai and Ethiraj, Baranitharan and Yousuf, Abu and Huei, Ruey Ong and Khan, Maksudur R. (2017) Bioelectrochemical Behavior Of Wild Type Bacillus Cereus In Dual Chamber Microbial Fuel Cell. IIUM Engineering Journal, 18 (2). pp. 79-86. ISSN 2289-7860. (Published)

Islam, Mir Sujaul and Arafat, Md. Yasir and Zularisam, A. W. and Edriyana, Abd Aziz (2017) Characterization of Chini Lake Water Quality with Malaysian WQI using Multivariate Statistical Analysis. Bangladesh Journal of Botany, 46 (2). pp. 691-699. ISSN 0253-5416. (Published)

Jabbar, Waheb A. and Mahamod, Ismail and Rosdiadee, Nordin (2017) Energy and Mobility Conscious Multipath Routing Scheme for Route Stability and Load Balancing in MANETs. Simulation Modelling Practice and Theory, 77. pp. 245-271. ISSN 1569-190X. (Published)

Jarial, Rini and Shard, A. and Thakur, Sveta and Mimi Sakinah, A. M. and Zularisam, A. W. and Rezania, Shahabaldin and Kanwar, S. S. and Singh, L. (2017) Characterization of Flavonoids from Fern Cheilanthes Tenuifolia and Evaluation of Antioxidant, Antimicrobial and Anticancer Activities. Journal of King Saud University - Science. ISSN 1018-3647. (In Press / Online First) (In Press / Online First)

Jarial, Rini and Singh, Lakhveer and Thakur, Sveta and Zularisam, A. W. and Mimi Sakinah, A. M. and S. S., Kanwar (2017) Evaluation of Antilipolytic, Antioxidant and Antibacterial Activities of Selected Ferns. Journal of Applied Pharmaceutical Science, 7 (6). pp. 150-156. ISSN 2231-3354. (Published)

Jarial, Rini and Singh, Lakhveer and Zularisam, A. W. and Kanwar, S. S. (2017) Anti-lipolytic activity and phytochemical screening of Chelianthesalbomarginata against pathogenic microorganisms. IIUM Engineering Journal, 18 (2). pp. 56-62. ISSN 1511-788X. (Published)

Jun, Yan Tai and Kah, Hon Leong and Pichiah, Saravanan and Azrina, Abd Aziz (2017) Dopant-free Oxygen-rich Titanium Dioxide: LED Light-induced Photocatalysis and Mechanism Insight. Journal of Materials Science and Chemical Engineering, 52 (19). pp. 11630-11642. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

Jun, Yun Tai and Kah, Hon Leong and Saravanan, Pichiah and Azrina, Abd Aziz and Lan, Ching Sim (2017) Dopant-free oxygen-rich titanium dioxide: LED lightinduced photocatalysis and mechanism insight. Journal of Materials Science, 52 (19). pp. 11630-11642. ISSN 0022-2461 (Print); 1573-4803 (Online). (Published)

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. (2017) Computational Techniques for Assessing the Reliability and Sustainability of Electrical Power Systems: A Review. Renewable and Sustainable Energy Reviews, 80. pp. 1175-1186. ISSN 1364-0321. (Published)

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. (2017) Reliability Assessment of Power Generation Systems Using Intelligent Search Based on Disparity Theory. Energies, 10 (3). pp. 1-13. ISSN 1996-1073 . (Published)

Kadhem, Athraa Ali and Noor Izzri, Abdul Wahab and Ishak, Aris and Jasronita, Jasni and Abdalla, Ahmed N. and Matsukawa, Yoshiaki (2017) Reliability assessment of generating systems with wind power penetration via BPSO. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1248-1254. ISSN 2088-5334. (Published)

Kah, Hon Leong and Azrina, Abd Aziz and Yee, Li Kang and Sheau, Wei Goh and Kulhar, Vijay Singh and Lan, Ching Sim and Pichiah, Saravanan (2017) Synergized Mechanistic and Solar Photocatalysis Features of N-TiO2 Functionalised Activated Carbon. AIMS Materials Science, 4 (3). pp. 800-813. ISSN 2372-0484. (Published)

Keream, Settar S. and Abdalla, Ahmed N. and Mohd Razali, Daud (2017) Nonlinear Dynamic Inverse Controller Based In Field Oriented With SVPWM Current Control. Pertanika Journal of Science & Technology (JST), 25 (S.). pp. 37-44. ISSN 0128-7680. (Published)

Kharudin, Ali and Abdalla, Ahmed N. and Damhuji, Rifai and Faraj, Moneer A. (2017) A Review on System Development in Eddy Current Testing and Technique for Defect Classification and Characterization. IET Circuits, Devices & Systems, 11 (4). pp. 330-343. ISSN 1751-858X. (Published)

Khudhur, Ahmed M. and Hashim, Yasir and Abdalla, Ahmed N. (2017) Development of Neuron Ion Channel Model using Colored Noise Terms in the Conductance. Research Journal of Applied Sciences, Engineering and Technology, 14 (7). pp. 262-270. ISSN 2040-7459. (Published)

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, A. M. and Thakur, Sveta and Mohd, Nasrullah and Otieno, Andrew and Zularisam, A. W. (2017) An Investigation of Two-Stage Thermophilic and Mesophilic Fermentation Process for the Production of Hydrogen and Methane from Palm Oil Mill Effluent. Environmental Progress & Sustainable Energy, 36 (3). pp. 895-902. ISSN 1944-7442 (print); 1944-7450 (online). (Published)

Krishnan, Santhana and Singh, Lakhveer and Puranjan, Mishra and Mohd, Nasrullah and Mimi Sakinah, A. M. and Thakur, Sveta and Siddique, Md. Nurul Islam and Zularisam, A. W. (2017) Comparison of Process Stability in Methane Generation from Palm Oil Mill Effluent using Dairy Manure as Inoculum. Environmental Technology & Innovation, 8. pp. 360-365. ISSN 2352-1864. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Enhanced Oxygen Reduction Reaction In Air-Cathode Microbial Fuel Cells Using Flower-Like Co3O4 As An Efficient Cathode Catalyst. International Journal of Hydrogen Energy, 42 (30). pp. 19287-19295. ISSN 0360-3199. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Mesoporous Co3O4 Nanoflakes as an Efficient and Non-Precious Cathode Catalyst for Oxygen Reduction Reaction in Air-Cathode Microbial Fuel Cells. Journal of the Taiwan Institute of Chemical Engineers, 78. pp. 329-336. ISSN 1876-1070. (Published)

Li, Woon Koay and Hashim, Yasir (2017) A Review On Indoor Smart Energy Management System. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-16. ISSN 2289-697X. (Published)

Li, Woon Koay and Naif, Yasir Hashim (2017) A review on indoor smart energy managemet system. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-16. ISSN 2289-697X. (Published)

Mahmood, Syed and Sengupta, Pinaki and Mandal, Uttam K. and Chatterjee, Bappaditya and Taher, Muhammad (2017) Development, Validation and Pharmacokinetic Application of a Simple and Robust RP-HPLC Method for Quantitation of Raloxifene in Rat Plasma. Latin American Journal of Pharmacy, 36 (9). pp. 1901-1908. ISSN 2362-3853. (Published)

Maryam, Zahaba and Hazrin, Abdul Hadi and Hizrri, Ariffin and Norhidayah, Abdull and Niza, Samsuddin and Mohd Shukri, Mohd Aris (2017) Composition and source determination of heavy metals (HM) in particles in selected primary schools in Pahang. ESTEEM Academic Journal, 13 (Special). pp. 176-184. ISSN 1675-7939 (Print); 2289-4934 (Online). (Published)

Mohamad Hazeem, Mohmad Sidik and Mohd Rashid, Ab Hamid and Abdullah, Ibrahim and Zarina, Mohd Ali (2017) Theoretical support for staff satisfaction in higher education institutions: a conceptual framework. Jurnal Pengukuran Kualiti & Analisis, 13 (2). pp. 1-16. ISSN 1823-5670. (Published)

Mohamad Rizza, Othman and Hanida, Abdul Aziz and Azmi, Mohd Shariff and Lian, See Tan (2017) Application of Analytic Hierarchy Process (AHP) in Prioritizing HAZOP Analysis for Pilot Plant. Chemical Engineering Research Bulletin, 19. pp. 87-95. ISSN 2072-9510. (Published)

Mohamad Shahrulnizam, Zakaria and Mohd Rashidi, Salim and Mohd Haniff, Ibrahim and Asrul Izam, Azmi and Ahmad Sharmi, Abdullah and Muhammad Yusof, Mohd Noor and Nor Hafizah, Ngajikin and Hadi, Manap (2017) Analysis of improved low cost transmissive formaldehyde (CH2O) ultraviolet gas sensor. Journal of Electrical Engineering, 16 (2). pp. 16-21. ISSN 0128-4428. (Published)

Mohammad Affendy, Omardin and Wan Mohd Nazmi, Wan Abdul Rahman and Wan Dagang, Wan Ali (2017) Integration of Environmental Sustainability Strategies Within Pre-Construction Processes. The Social Sciences, 12 (5). pp. 787-793. ISSN 1818-5800. (Published)

Mohammad Affendy, Omardin and Yao, Liu and Diyana, Kamarudin (2017) In-house green knowledge practice for hospital building maintenance. Journal of Information System and Technology Management, 2 (6). pp. 62-72. ISSN 0128-1666. (Published)

Mohd, Nasrullah and Singh, Lakhveer and Zahari, Mohamad and Siti, Norsita and Santhana, Krishnan and Norul Wahida, Kamaruzaman and Zularisam, A. W. (2017) Treatment of Palm Oil Mill Effluent by Electrocoagulation with Presence of Hydrogen Peroxide as Oxidizing Agent and Polialuminum Chloride as Coagulant-Aid. Water Resources and Industry, 17. pp. 7-10. ISSN 2212-3717. (Published)

Mohd Amir Shahlan, Mohd Aspar and Nasrul Anuar, Abd Razak and Mohammed Rafiq, Abdul Kadir and Hadi, Manap (2017) Development of 3-Dimensional Model of Femur Bone Considering Cortical and Cancellous Structures. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-8. ISSN 2289-697X. (Published)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli and Mohammad Affendy, Omardin (2017) Tropical Residual Soil Properties on Slopes. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-9. ISSN 2289-697X. (Published)

Mohd Hazreek, Zainal Abidin and Aziman, Madun and Saiful Azhar, Ahmad Tajudin and Mohd Fakhrurrazi, Ishak (2017) Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia. Procedia Engineering, 171. pp. 434-444. ISSN 1877-7058. (Published)

Mohd Najib, Yacob and Mimi Haryani, Hassim (2017) Comprehensive Review on Risk Assessment Methodologies for HAZMAT Transportation Between 1995-2015. Journal of Advanced Review on Scientific Research, 30 (1). pp. 12-59. ISSN 2289-7887. (Published)

Moneer, A. Faraj and Fahmi, Samsuri and Abdalla, Ahmed N. and Damhuji, Rifai and Kharudin, Ali (2017) Adaptive Neuro-Fuzzy Inference System Model Based on the Width and Depth of the Defect in an Eddy Current Signal. Applied Sciences, 7 (7). pp. 1-12. ISSN 2076-3417. (Published)

Monir, Md Minhaj Uddin and Yousuf, Abu and Azrina, Abd Aziz and Atnaw, Samson M. (2017) Enhancing Co-Gasification of Coconut Shell by Reusing Char. Indian Journal of Science and Technology, 10 (6). pp. 1-5. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Muhammad Farhan, Zolkepli and Mohd Fakhrurrazi, Ishak (2017) Exploration of Methods for Slope Stabilization Influence by Unsaturated Soil. Malaysian Journal of Civil Engineering, 29 (2). pp. 121-131. ISSN 1823-7843. (Published)

N., Baharudin and Nor Mazlee, Norazmi and Hadi, Manap (2017) Colour Measurement by UV Absorption Technique. International Journal of Information Research and Review, 4 (2). pp. 3754-3759. ISSN 2349-9141. (Published)

Navale, S. J. and Kulkarni, R. R. and Thipse, S. S. (2017) An Experimental Study On Performance, Emission And Combustion Parameters Of Hydrogen Fueled Spark Ignition Engine With The Timed Manifold Injection System. International Journal of Hydrogen Energy, 42 (12). pp. 8299-8309. ISSN 0360-3199. (Published)

Nik Nor Aziati, Abdul Aziz and Mimi Sakinah, A. M. (2017) Optimization Of Glycerol Recovery From Pretreatment Process To Produce Succinic Acid Via Anaerobic Fermentation. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 2. pp. 27-36. ISSN 0126-8139. (Published)

Nor Wahidatul, Azura and Zularisam, A. W. and Siti, Norsita and Mohd, Nasrullah and Norul Wahida, Kamaruzaman (2017) Effect of Fast Pyrolysis Operating Conditions on Product Yield of Red Meranti Sawdust. International Research Journal of Engineering and Technology (IRJET), 4 (9). pp. 607-611. ISSN 2395-0072 (Print); 2395-0056 (Online). (Published)

Norasiha, Hamid and Mimi Sakinah, A. M. (2017) An Adsorption Kinetic and Thermodynamic Study of Dyeing Betacyanin Extract from Dragon Fruit Skin onto the Spun Silk and Acrylic Yarn. Australian Journal of Basic and Applied Sciences, 11 (4). pp. 33-41. ISSN 1991-8178. (Published)

Norasiha, Hamid and Mimi Sakinah, A. M. (2017) Optimization On Dyeing Uptake Exhaustion Percentage Of Betacyanin Pigment Extracted From Hylocereus Polyrhizus Peel Onto The Spun Silk Yarn Using Central Composite Design. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 1 (1). pp. 72-82. ISSN 0126-8139. (Published)

Norlisa, Harruddin and Syed Mohd Saufi, Tuan Chik and C. K. M., Faizal and Abdul Wahab, Mohammad (2017) Removal of acetic acid from aqueous solution by polyethersulfone supported liquid membrane. Chemical Engineering Transactions, 56. pp. 847-852. ISSN 2283-9216. (Published)

Nurhusna, Samsudin and Yumi Zuhanis Has Yun, Hashim and Mohd Azmir, Arifin and Maizirwan, Mel and Hamzah, Mohd Salleh and Iis, Sopyan and Dzun Noraini, Jimat (2017) Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance. Cytotechnology, 69 (4). pp. 601-616. ISSN 0920-9069 (Print); 1573-0778 (Online). (Published)

Nurhusna, Samsudin and Yumi Zuhanis Has Yun, Hashim and Mohd Azmir, Arifin and Maizirwan, Mel and Hamzah, Mohd. Salleh and Norshariza, Nordin and Sopyan, Iis and Dzun Noraini, Jimat (2017) Statistical optimization of gelatin immobilisation on modified surface PCL microcarrier to improve PCL microcarrier compatibility. Jurnal Teknologi (Sciences & Engineering), 79 (6). pp. 167-175. ISSN 2180–3722. (Published)

Pathak, Sunil and Jain, N. K. (2017) Critical Review Of Electrochemical Honing: Sustainable And Alternative Gear Finishing Process. Part 2: Effects Of Various Process Parameters On Surface Characteristics And Material Removal Rate. Transactions of the IMF, 95 (5). pp. 241-254. ISSN 0020-2967 (Print); 1745-9192 (Online). (Published)

Pathak, Sunil and Jain, N. K. (2017) Critical Review of Electrochemical Honing (ECH): Sustainable and Alternative Gear Finishing Process. Part 1: Conventional Processes and Introduction to ECH. Transactions of the IMF, 95 (3). pp. 147-157. ISSN 0020-2967 (Print); 1745-9192 (Online). (Published)

Pathak, Sunil and Jain, N. K. (2017) Modeling and Experimental Validation of Volumetric Material Removal Rate and Surface Roughness Depth of Straight Bevel Gears in Pulsed-ECH Process. International Journal of Mechanical Sciences, 124-5. pp. 132-144. ISSN 0020-7403. (Published)

Pathak, Sunil and Saha, Gobinda C. (2017) Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review. Coatings, 7 (8). pp. 1-27. ISSN 2079-6412. (Published)

Puranjan, Mishra and Sveta, Thakur and Singh, Lakhveer and Santhana, Krishnan and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Fermentative Hydrogen Production from Indigenous Mesophilic Strain Bacillus Anthracis PUNAJAN 1 Newly Isolated from Palm Oil Mill Effluent. International Journal of Hydrogen Energy, 42 (25). pp. 16054-16063. ISSN 0360-3199. (Published)

Rana, Supriyanka and Singh, Lakhveer and Zularisam, A. W. and Liu, Hong (2017) A recent overview of palm oil mill effluent management via bioreactor configurations. Current Pollution Reports, 3 (4). pp. 254-267. ISSN 2198-6592. (Published)

Robin, Lee and Chong, Chee Kiong and Chin, Tin Huang and Kulkarni, R. R. (2017) Development and Testing of Hot Cold Tumbler Operating on Peltier Effect. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-5. ISSN 2289-697X. (Published)

Roshahliza, M. Ramli and Noor, Ali O. Abid and Salina, Abdul Samad (2017) Noise Cancellation using Selectable Adaptive Algorithm for Speech in Variable Noise Environment. International Journal of Speech Technology, 20 (3). pp. 535-542. ISSN 1572-8110. (Published)

S., Nurulain and Nor Mazlee, Norazmi and M. R., Salim and Hadi, Manap (2017) A Review on Optical Fibre Sensor Topology and Modulation Technique. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X. (Published)

S. N., Mohamad Aziz and Mimi Sakinah, A. M. (2017) The Solubilization and Extraction Parameters of Erythromycin from Aqueous Phase Into Mixed AOT/SB3-18 Reverse Micelle Phase. Chemical Engineering Research Bulletin, 19 (Special). pp. 123-128. ISSN 0379-7678 (Print); 2072-9510 (Online). (Published)

S. S., Sulaiman and Muhamad Arifpin, Mansor (2017) A case study: SMED contributor using Shapley value. Journal of Engineering and Technology, 8 (1). pp. 45-51. ISSN 2180-3811. (Published)

Santhana, Krishnan and Singh, Lakhveer and Mimi Sakinah, A. M. and Thakur, Sveta and Zularisam, A. W. and Ghrayeb, Omar A. (2017) Role of Organic Loading Rate in Bioenergy Generation from Palm Oil Mill Effluent in a Two-Stage Up-Flow Anaerobic Sludge Blanket Continuous-Stirred Tank Reactor. Journal of Cleaner Production, 142 (Pt. 4). pp. 3044-3049. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Siddique, Md. Nurul Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) The Combined Effect of Ultrasonic and Microwave Pre-Treatment on Bio-Methane Generation from Co-Digestion of Petrochemical Wastewater. Journal of Cleaner Production, 145. pp. 303-309. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Siddique, Md. Nurul Islam and Mohd Fakhrurrazi, Ishak and Zularisam, A. W. (2017) Enriched Renewable Methane from the Anaerobic Digestion of Petrochemical Wastewater: A Bio-Remediation Study. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-8. ISSN 2289-697X. (Published)

Siti Norazimah, Mohamad Aziz and Mimi Sakinah, A. M. (2017) Mathematical Modelling Of Backward Extraction Mixed Reverse Micelle Of Amoxicillin By Surface Response Methodology (RSM). Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 2. pp. 47-58. ISSN 0126-8139. (Published)

Siti Sabrina, Mohd Sukri and Mimi Sakinah, A. M. (2017) Combination of Entrapment and Covalent Binding Techniques for Xylanase Immobilisation on Alginate Beads: Screening Process Parameters. Chemical Engineering Transactions, 56. pp. 169-174. ISSN 2283-9216. (Published)

Siti Sabrina, Mohd Sukri and Mimi Sakinah, A. M. (2017) Effects of Support Matrix for Xylanase Immobilisation on Alginate Hydrogel Beads. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-8. ISSN 2289-697X. (Published)

Siti Sabrina, Mohd Sukri and Mimi Sakinah, A. M. (2017) Effects of Support Matrix for Xylanase Immobilisationon Alginate Hydrogel Beads. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-8. ISSN 2289-697X. (Published)

Siti Sabrina, Mohd Sukri and Mimi Sakinah, A. M. (2017) Production of High Commercial Value Xylooligosaccharides from Meranti Wood Sawdust Using Immobilised Xylanase. Applied Biochemistry and Biotechnology. pp. 1-13. ISSN 1559-0291. (In Press / Online First) (In Press / Online First)

Tan, Sze Pei and S. N., M. Saffe and Siti Aishah, Rusdan and Nurul Nadiah, Nor Hamran (2017) Oblique Impact on Crashworthiness: Review. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-17. ISSN 2289-697X. (Published)

Tengku Khamanur Azma, Tg. Mohd Zamri and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Adsorption and Kinetic Studies Of A Natural Dye from Curcuma longa L., Onto Bamboo Yarn. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 2. pp. 13-26. ISSN 0126-8139. (Published)

Tengku Khamanur Azma, Tg. Mohd Zamri and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Adsorption and Kinetic Studies of Dyeing Clitoria ternatea L. Natural Dye onto Bamboo Yarn. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-16. ISSN 2289-697X. (Published)

Tengku Khamanur Azma, Tg. Mohd Zamri and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Regression Analysis for the Adsorption Isotherms of Natural Dyes onto Bamboo Yarn. International Research Journal of Engineering and Technology (IRJET), 4 (6). pp. 1699-1703. ISSN 2395-0072 (Print); 2395-0056 (Online). (Published)

Thakur, Sveta and Singh, Lakhveer and Zularisam, A. W. and Mimi Sakinah, A. M. and M. F. M., Din (2017) Lead Induced Oxidative Stress and Alteration in the Activities of Antioxidative Enzymes in Rice Shoots. Biologia Plantarum, 61 (3). pp. 595-598. ISSN 0006-3134 (Print); 1573-8264 (Online). (Published)

Tony, Hadibarata and Khudhair, Ameer Badr and Kristanti, Risky Ayu and Kamyab, Hesam (2017) Biodegradation of Pyrene by Candida sp. S1 under High Salinity Conditions. Bioprocess and Biosystems Engineering, 40 (9). pp. 1411-1418. ISSN 1615-7591. (Published)

Wahaizad, Safiei and Muhamad Ridzuan, Radin Muhamad Amin (2017) Experimental Investigation Of EDM Die Sinking Process Parameters On Aluminium Alloy 5083 Using Design Of Experiment. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 1-7. ISSN 2289-697X. (Published)

Wan Nurul Huda, Wan Zainal and Soon, Huat Tan and Mohd Azmier, Ahmad (2017) Carbon Membranes Prepared from a Polymer Blend of Polyethylene Glycol and Polyetherimide. Chemical Engineering and Technology, 40 (1). pp. 94-102. ISSN 1521-4125. (Published)

Yousuf, Abu and Khan, Maksudur R. and Islam, M. Amirul and Zularisam, A. W. and Pirozzi, Domenico (2017) Technical Difficulties and Solutions of Direct Transesterification Process of Microbial Oil for Biodiesel Synthesis. Biotechnology Letters, 39 (1). pp. 13-23. ISSN 0141-5492. (Published)

Yousuf, Abu and Sultana, Sharmin and Monir, Minhaj Uddin and Karim, Ahasanul and Syed Radzi, Rahamaddulla (2017) Social Business Models for Empowering the Biogas Technology. Energy Sources, Part B: Economics, Planning, and Policy , 12 (2). pp. 99-109. ISSN 1556-7249 (Print); 1556-7257 (Online). (Published)

Zuriana Sidi, Ahmad and Mimi Sakinah, A. M. (2017) Effect of Fermentation Time, Moisture Content, and Temperature on Sorbitol Production Via Solid State Fermentation Process. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 1 (1). pp. 64-71. ISSN 0126-8139. (Published)

Book

Singh, Lakhveer and Kalia, Vipin Chandra, eds. (2017) Waste Biomass Management - A Holistic Approach. Springer International Publishing. ISBN 978-3-319-49595-8

Alsibai, Mohammad Hayyan (2017) Arduino/ Genuino start as profesional. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-53-5

Alsibai, Mohammed Hayyan and Sulastri, Abdul Manap (2017) Arduino/Genuino: start as professional: short course in a book. Penerbit UMP, Kuantan, Pahang. ISBN 9789672054535

Khudhur, Ahmed Mahmood and Naif, Yasir Hashim and Khdher, Abdolbaqi Mohammed (2017) Enhancement the voltage clamp technique under noisy input currents. LAP LAMBERT Academic Publishing. ISBN 978-3-330-33515-8

Mimi Sakinah, A. M. (2017) Conceptual paper presentation (engineering). Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-09-2

Yousuf, Abu and Syed Radzi, Rahamaddulla (2017) Facility management. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2054-29-0

Book Chapter

Atnaw, Samson M. and Shaharin Anwar, Sulaiman and Suzana, Yusup (2017) Biomass Gasification. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 159-186. ISBN 978-3-319-49595-8

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. (2017) Microbial Fuel Cells: Types and Applications. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 367-384. ISBN 978-3-319-49595-8

M. Rafiqul, Islam and Mimi Sakinah, A. M. and Zularisam, A. W. (2017) Hydrolysis of Lignocellulosic Biomass for Recovering Hemicellulose: State of the Art. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 73-106. ISBN 978-3-319-49595-8

Siddiqui, Muhammad Faisal and Singh, Lakhveer and Zularisam, A. W. (2017) Treatment of Dye Wastewater for Water Reuse Using Membrane Bioreactor and Biofouling Control. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 121-136. ISBN 9783319495958 (online); 9783319495941(print)

Yousuf, Abu and Khan, Maksudur R. and Pirozzi, Domenico and Zularisam, A. W. and Atnaw, Samson M. (2017) Economic and Market Value of Biogas Technology. In: Waste Biomass Management - A Holistic Approach. Springer, pp. 137-158. ISBN 9783319495958 (online); 9783319495941(print)

Conference or Workshop Item

A., Shaari and Mazrul Nizam, Abu Seman and C. K. M., Faizal (2017) Optimization of Mechanical Properties of Silver Nanoparticles (AgNPS)-Loaded Chitosan/Polylactic Acid (PLA) Biofilms by Using Response Surface Methodology (RSM). In: 2nd International Conference on Materials Science and Nanotechnology (ICMSNT 2017) and 2nd International Symposium on Material Science and Technology (ISMST 2017) , 19-22 April 201 , Auckland, New Zealand. pp. 1-6., 109 (01001). ISSN 2261-236X (Published)

Alsibai, Mohammad Hayyan and Syafiq Fauzi, Kamarulzaman and Hossam , Adden Alfarra and Naif, Yasir Hashim (2017) Real Time Emergency Auto Parking System in Driver Lethargic State for Accident Preventing. In: MATEC Web of Conferences: The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) , 2-3 August 2016 , Malaysia Automotive Institute, Cyberjaya, Selangor. pp. 1-10., 90 (01034). ISSN 2261-236X (Published)

Alsibai, Mohammed Hayyan and Sayong, Maxwell and Koay, Li Woon and Atnaw, Samson M. and Nurul Nadia, Nor Hamran (2017) Optimization of hybrid electric vehicle control for efficient performance at critical energy levels. In: 6th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2016) , 25-27 November 2016 , PARK ROYAL Penang Resort, Penang; Malaysia. pp. 205-210.. ISBN 978-1-5090-1178-0 (Published)

Alwin, Long Su Weng and Atnaw, Samson M. and Roziah, Zailan and Muhamad Muhtazam, Noor Din (2017) Sustainability Management Program for Industries- A Case Study. In: Fluids and Chemical Engineering Conference (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah, Malaysia. pp. 1-5., 111 (02010). ISSN 2261-236X (Published)

Alwin, Long Su Weng and Atnaw, Samson M. and Roziah, Zailan and Muhamad Muhtazam, Noor Din (2017) Towards Cooling Tower Efficiency-An Energy Audit Approach. In: Fluids and Chemical Engineering Conference (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah, Malaysia. pp. 1-4., 111 (02011). ISSN 2261-236X (Published)

Atnaw, Samson M. and C. K. M., Faizal and Oumer, Abduaziz Jama (2017) Development of Solar Biomass Drying System. In: MATEC Web of Conferences: Engineering Technology International Conference 2016 (ETIC 2016) , 4-5 August 2016 , Ho Chi Mini City, Vietnam. pp. 1-7., 97 (01081). ISSN 2261-236X (Published)

Baridula, Ravinder Reddy and Abdullah, Ibrahim and C. K. M., Faizal and Kulkarni, Ratnakar and Ramaraju, Ramgopal Varma (2017) Influence of groove size and reinforcements addition on mechanical properties and microstructure of friction stir welded joints. In: 4th Asia Pacific Conference on Manufacturing Systems and the 3rd International Manufacturing Engineering Conference, APCOMS-iMEC 2017 , 7-8 December 2017 , Yogyakarta, Indonesia. pp. 1-8., 319 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Baridula, Ravinder Reddy and C. K. M., Faizal and Ramaraju, Ramgopal Varma and Abdullah, Ibrahim (2017) Effect of Welding Speed on Microstructure and Mechanical Properties due to The Deposition of Reinforcements on Friction Stir Welded Dissimilar Aluminium Alloys. In: MATEC Web of Conferences: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17) , 22-23 July 2017 , Langkawi, Malaysia. pp. 1-11., 135 (00039). ISSN 261-236X (Published)

Ezrin Hani, Sukadarin and Hanida, Abdul Aziz and Junaidah, Zakaria and Joharizal, Johari and Mimi Nabila, Mohd Noordin and Mohd Hafizi, Che Mat and Mohd Shamsul Azmi, Samsudin and Mohd Fauzan, Mohd and Nur Fazrina, Mohd Salleh (2017) Occupational safety and health risk management in pineapple plantation. In: Proceedings of 4th National Conference on Knowledge Transfer , 11-12 December 2017 , Kedah. pp. 220-225.. (Unpublished) (Unpublished)

Ezrin Hani, Sukadarin and Nur Syazwani, Mohd Nawi and Baba, M. Deros and Norani, Nordin and Mohd Nizam A., Rahman (2017) Critical factors for oil palm plantation workers acceptance and use of mechanization technovation tools. In: 2nd World Conference on Technology, Innovation and Entrepreneurship , 12-14 May 2017 , Istanbul, Turkey. pp. 218-223., 4. ISSN 978-605-9811-01-9 (Published)

Hashim, Yasir (2017) Investigation of FinFET as a Temperature Nano-Sensor Based on Channel Semiconductor Type. In: IOP Conference Series: Materials Science and Engineering, International Research and Innovation Summit (IRIS2017) , 6-7 May 2017 , Melaka, Malaysia. pp. 1-6., 226 (012123). ISSN 1757-899X (Published)

Hashim, Yasir (2017) Temperature Effect on ON/OFF Current Ratio of FinFET Transistor. In: 2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) , 23-25 August 2017 , Batu Ferringhi, Malaysia. pp. 231-234. (172623). ISBN 978-1-5090-4029-2 (Published)

Hazreek, Z.A.M and Raqib, A.G.A. and Aziman, M. and Azhar, A.T.S. and Khaidir, A.T.M. and Fairus, Y.M. and Rosli, S. and Mohd Fakhrurrazi, Ishak and Izzaty, R.A. (2017) Preliminary Groundwater Assessment using Electrical Method at Quaternary Deposits Area. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-10., 226 (1). ISSN 1757-8981(print); 1757-899X(online) (Published)

Jabbar, Waheb A. and Mahamod, Ismail and Rosdiadee, Nordin and Roshahliza, M. Ramli (2017) Traffic Load-Based Analysis of MBQA-OLSR Routing Protocol in Wireless Ad Hoc Networks. In: IEEE Region 10 Conference (TENCON 2017) , 5-8 November 2017 , Pulau Pinang. pp. 2677-2682.. ISBN 978-1-5090-1134-6/17 (Published)

Kharudin, Ali and Abdalla, Ahmed N. and Damhuji, Rifai (2017) Multi-Excitation Signal for Depth Crack Defect in Eddy Current Testing. In: The International Conference on Fluids and Chemical Engineering (FluidsChE 2017) , 4-6 April 2017 , Kota Kinabalu, Sabah. pp. 1-6.. (Unpublished) (Unpublished)

Khudhur, Ahmed M. and Naif, Yasir Hashim and Abdalla, Ahmed N. (2017) Enhancement into the dissipative stochastic mechanics based neuron model under input current pulses. In: 15th International Conference on Researches in Science and Technology (ICRST) , 23-24 June 2017 , Kuala Lumpur, Malaysia. p. 24.. (Published)

Mohamad Hazeem, Mohmad Sidik and Ab Hamid, Mohd Rashid and Abdullah, Ibrahim (2017) Descriptive analysis of staff satisfaction and turnover intention in a Malaysian University. In: AIP Conference Proceedings; 3rd ISM International Statistical Conference 2016: Bringing Professionalism and Prestige in Statistics, ISM 2016 , 9 - 11 August 2016 , Institute of Mathematical Sciences, University of Malaya, Kuala Lumpur. pp. 1-2., 1842. ISSN 0094-243X ISBN 9780735415126 (Published)

Mohammad Affendy, Omardin and Liu, Yao and Diyana, Kamarudin (2017) In-house green knowledge practice for hospital building maintenance. In: Proceeding: International Conference on Social Sciences, Humanities and Technology (ICSHT 2017) , 2-3 December 2017 , Kota Bharu, Kelantan, Malaysia. pp. 391-401.. ISBN 978-967-14841-3-5 (Published)

Mohd Anwar, Zawawi and Nurul Sufia, Nor Ziran and Hadi, Manap (2017) Respiration rate detection based on intensity modulation using plastic optical fiber. In: International Conference on Applied Photonics and Electronics (InCAPE 2017) , 9-10 August 2017 , Port Dickson, N. Sembilan. pp. 1-4., 162. ISSN 2101-6275 (Published)

Mohd Fakhrurrazi, Ishak and Mohammad Affendy, Omardin and M.H., Zainal Abidin and S.A., Ahmad Tajudin (2017) A Simple and Effective Tool to Extrude Tropical Residual Soil Sample. In: 3rd and 4th International Engineering Research and Innovation Symposium, IRIS 2017 , 6–7 May 2017 , Melaka, Malaysia. pp. 1-6., 226 (1). ISSN 17578981 (Published)

Muhamad Arifpin, Mansor and A. R., Ismail and Nurul Nadia, Nor Hamran and M. S., Sarifudin (2017) Knowledge Management To Boost Productivity In Manufacturing. In: 3rd International Conference On Business and Engineering Research (ICBER 2017) , 17-18 November 2017 , Osaka,Japan. pp. 1-5.. (Unpublished) (Unpublished)

Noor Asiah, Mohamad and Ow, Yu Zen and Idrus, Ahmad (2017) Delineation of Catchment Boundary for Flood Prone Area: A Case Study of Pekan Town Area. In: 5th International Young Researchers Workshop on River Basin Environment and Management , 28-29 October 2017 , Hotel Swiss Garden Resort, Kuantan. pp. 1-5.. (Unpublished) (Unpublished)

Noor Fifinatasha, Shahedan and Mohd Mustafa Al Bakri, Abdullah and Norsuria, Mahmed and Kusbiantoro, Andri and Mohammed, Hussain and Siti Norsaffirah, Zailan (2017) Review on Thermal Insulation Performance in Various Type of Concrete. In: 5th International Conference on Advanced Material Engineering and Technology 2016, ICAMET 2016 , 8 - 9 December 2016 , Kaohsiung City, Taiwan. pp. 1-6., 1835 (1). ISSN 0094-243X (Published)

Nor Mazlee, Norazmi and Zul Rasyied, Abdul Rasat and Mazuina, Mohamad and Hadi, Manap (2017) Uric acid detection using uv-vis spectrometer. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017) , 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-6., 257 (012031). ISSN 1757-899X (Published)

Nor Wahidatul, Azura and Zularisam, A. W. and Mimi Sakinah, A. M. and Mohd, Nasrullah and Siti, Norsita (2017) Effect of Fast Pyrolysis Operation Condition on Bio-Oil Production of Red Meranti Sawdust. In: International Conference On Air Quality & Environmental Sustainability (ICAQES 2017) , 23-24 August 2017 , Terengganu, Malaysia. pp. 1-13.. (Unpublished) (Unpublished)

Nor Wahidatul, Azura and Zularisam, A. W. and Mimi Sakinah, A. M. and Mohd, Nasrullah and Siti, Norsita (2017) Optimization of Fast Pyrolysis Condition of Red Meranti Sawdust on Bio-Oil Yield. In: International Conference On Air Quality & Environmental Sustainability (ICAQES 2017) , 23-24 August 2017 , Terengganu, Malaysia. pp. 1-16.. (Unpublished) (Unpublished)

Nurul Nadia, Mohammad and Ahmad Aftas, Azman and Mohd Hezri, Marzaki and Ramli, Adnan and Mohd Hezri, Fazalul Rahiman and Saiful Nizam, Tajuddin (2017) Evaluation on energy consumption in compact hydro distillation process between MPC and PID control. In: 8th IEEE Control and System Graduate Research Colloquium, ICSGRC 2017 , 4-5 August 2017 , Shah Alam, Malaysia. pp. 116-121. (8070579). ISBN 9781538603802 (Published)

Nurulain, S. and M. R., Radin and K., Suzalina and Hadi, Manap (2017) Spectra Comparison For An Optical Breathing Gas Sensor Development. In: AIP Conference Proceedings: Engineering Technology International Conference (ETIC 2016) , 4-5 August 2016 , Ho Chi Minh City, Vietnam. pp. 1-6., 1835 (020035). ISBN 978-0-7354-1505-8 (Published)

Qasim, Ban and Abdul Syukor, Abd Razak and Siddique, Md. Nurul Islam (2017) The Microbiological Quality of Harvested Rainwater System for Domestic Use in Gambang, Malaysia. In: AWWA Annual Conference & Exposition (ACE17) , 11-14 June 2017 , Philadelphia, Pennsylvania, United States. pp. 1-17.. (Published)

Roziah, Zailan and Siti Nurzalikha, Zaini and Muhammad Ikram, Mohd Rashid and A. A., Razak (2017) Feasibility study of standalone PV-wind-diesel energy systems for coastal residential application in Pekan, Pahang. In: UTP-UMP Symposium on Energy Systems, SES 2017 , 26-27 September 2017 , Perak, Malaysia. 1 -6., 131 (02001). ISSN 2261-236X (Published)

S., Nurulain and Hadi, Manap (2017) Development of a visible light transmission (vlt) measurement system using an open-path optical method. In: International Conference on Electrical and Electronic Engineering 2017 , 14-15 Ogos 2017 , Pulai Spring Resort, Johor. pp. 1-5.. (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2017) Effect of mixing proportion on the properties of seaweed modified sustainable concrete. In: 2nd International Conference on Applied Science and Technology 2017, ICAST 2017 , 3–5 April 2017 , Kedah, Malaysia. pp. 1-7., 1891 (020132). ISSN 0094-243X ISBN 978-0-7354-1573-7 (Published)

Sultana, Sharmin and Norazaliza, Jamil and Saleh, E. A. M. and Yousuf, Abu and C. K. M., Faizal (2017) A Mathematical Model for Ethanol Fermentation From Oil Palm Trunk Sap Using Saccharomyces Cerevisiae. In: Journal of Physics: Conference Series, 1st International Conference on Applied & Industrial Mathematics and Statistics 2017 (ICoAIMS 2017) , 8-10 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-7., 890 (012050). ISSN 1742-6596 (Published)

Thaneissha, Marimuthu and Atnaw, Samson M. and Priyatharishini, Mardarveran and Sim, Shu Yi and Mazlin Azura, Usop and Muhammad Khairi, Md. Gapar and Siti Aishah, Rusdan and Roshahliza, M. Ramli and Shaharin, A. Sulaiman (2017) Design and Development of Solar Desalination Plant. In: MATEC Web of Conferences: UTP-UMP Symposium on Energy Systems (SES 2017) , 26-27 September 2017 , Perak, Malaysia. pp. 1-6., 131 (02004). ISSN 2261-236X (Published)

Yousuf, Abu and Khan, Maksudur R. and Islam, M. Amirul and Monir, Md Minhaj Uddin and Zularisam, A. W. and Pirozzi, Domenico (2017) Application of Electroporation Technique in Biofuel Processing. In: MATEC Web of Conferences: Engineering Technology International Conference (ETIC 2016) , 4-5 August 2016 , Ho Chi Minh City, Vietnam. pp. 1-5., 97 (01085). ISSN 2261-236X (Published)

Zularisam, A. W. and Norul Wahida, Kamaruzaman (2017) Kinetic and Isotherm Studies for Nickel (II) Removal Using Novel Mesoparticle Graphene Sand Composite Synthesised From Sand and Arenga Palm Sugar. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials Technology and Energy , 20-21 April 2017 , Curtin University, Malaysia. pp. 1-8., 217. ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Zularisam, A. W. and Norul Wahida, Kamaruzaman and Ahmad, Alfian (2017) Comparison on characteristic of Mesoparticle Graphene Sand Composite (MGSC) using different types of sugar to remove methylene blue. In: IOP Conference Series: Materials Science and Engineering, International Conference on Materials Technology and Energy , 20-21 April 2017 , Curtin University, Malaysia. pp. 1-5., 217 (012005). ISSN 1757-899X (Published)

Newspaper

Kusbiantoro, Andri (2017) 189 pelajar FTK tahun akhir pamer projek penyelidikan. UMP News . (Unpublished)

Thesis

Damhuji, Rifai (2017) Response surface and neuro fuzzy methodology for rotating magnetic field and GMR array sensor for crack detection in ferromagnetic pipe. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Dzulqarnain, Abu Bakar (2017) Improvising the integral approach model to address OSHMS leadership challenges at a Malaysian pipe coating facility. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Jarial, Rini (2017) Extraction, characterization and purification of flavonoids from filicophytes. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Keream, Settar Subry (2017) Enhancement of a three phase induction motor performance by using a nonlinear inverse dynamics controller. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kharudin, Ali (2017) Lift-off detection system using Error Compensated Eddy Current Testing based on fuzzy logic. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Roshahliza, M Ramli).

Mohd Nasrullah, Zulkifli (2017) Treatment of palm oil mill effluent by electrocoagulation process. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Naser, Mohamed M Muftah (2017) Investigation of pedestrian crossing facilities along Jalan Ampang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Anis Aneza, Lokman (2017) Fuzzy-logic based gripper design and analysis for objects grasping. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norasiha, Hamid (2017) Dyeing adsorption kinetics of ebtacyanin pigment extracted from hylocereus polyrhizus peel onto spun silk and acrylic yarn. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Santhana, Krishnan Chandrasekar (2017) Hydrogen and methane production from palm oil mill effluent through two-stage dark fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Tengku Khamanur Azma, Tg. Mohd Zamri (2017) Adsorption studies of dyeing natural dyes from local resources onto bamboo yarn. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zularisam, Abd Wahid).

UMPSA News

Mohammad Affendy, Omardin (2017) Pengkalan ilmu teknologi kejuruteraan keretapi api. UMP News .

Undergraduates Project Papers

Chong, Chee Keong (2017) Hot cold tumbler. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Junaidi, Rahman (2017) A study on effectiveness of pedestrian bridge utilization at Jalan Tanah Putih. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Koh, Chai Fong (2017) Development of photocatalyst for CO₂ conversion to hydrocarbon fuel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lai, Pauline Huey Min (2017) Fire safety practices among residents in Azelia Bukit Banyan, Sungai Petani, Kedah. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Marina, Maria Steven Imbahrajoo (2017) Adaptation of anti-cea hybridomas cell line to serum free culture medium by using slow adaptaion technique. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Martin, Hii Chun Yeong (2017) A study on the properties of rice husk reinforced bioplastic. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhamad Fadzil, Che Ani (2017) Design of smart wireless street lighting system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Adam, Zahari (2017) Design and development of single-axis solar tracking system and water level control for application of line focus concentrator for solar desalination process. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Hanif Ikhwan, Razali (2017) Development of smart mug with charging coaster using a peltier module and rechargeable battery. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noraina, Mohd Khlapiah (2017) A study of the heavy metal in tap water quality in Gambang area, Pahang. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Fatin Syahira, Rozak (2017) A solar charging system for a portable electric skateboard. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Maisarah, Mohd Isa (2017) Heat stress assessment among workers working at palm oil plantations in Muadzam Shah, Pahang. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Sharifah Fatma Munirah, Syed Zain (2017) Stair climbing robot. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Sim, Chun Kiat (2017) Batteries and circuit design for a portable electric skateboard as alternative green transportation. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor Hidayah, Nordin (2017) Risk management of musculoskeletal disorders and ergonomic risk factors in bakery manufacturing industry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor Izzati, Mat Yaacob (2017) Heat exposure and its health effects among construction site workers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor Suraya, Zulaini (2017) Pedestrian facilities for elderly people at UTC area, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Tan, Darlene Tzet Lene (2017) Extraction of propolis by using water and evaluation by TLC, HPLC and UV VIS spectrophotometry. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Tan, Kok Zhuan (2017) A study on the properties of oil palm mesocarp fiber-reinforced bioplastic. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Thaneissha, Marimuthu (2017) Design and development of solar desalination plant. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Tng, Wam Chen (2017) Developing a durable green electric skateboard. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Umi Rabiatul Ramzilah, P. Remli (2017) Effect of electroporation on microbial cell wall to extract lipid. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Wan Nurul Nabilah, Wan Suhaimi (2017) Pedestrian facilities for wheelchair users at UTC area Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Yeap, Shu Ying (2017) Biological hydrogen production from Palm Oil Mill Effluent (POME). Faculty of Engineering Technology, Universiti Malaysia Pahang.