Items where Division is "College of Engineering" and Year is 2020
 | Up a level |
A, Syahir and M B, Mat Piah and Waleed, Alhadadi and F, Hafidzah and M S Z, Desa and M Z M, Noor and Muhammad Aliff Nazreen, Norazmi and A., Ramli (2020) Mechanical and thermal properties of polyurethane/neoprene/ graphene blends. IOP Conference Series: Materials Science and Engineering, 736 (052028). pp. 1-11. (Published)
A. H, Hamisa and Mohd Yusof, Taib and W. H., Azmi and R., Mamat and M. Z., Sharif (2020) The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981
A. I., Ramadhan and W. H., Azmi and R., Mamat and Khairiah, Abdul Hamid (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22 (100782). pp. 1-9. ISSN 2214-157X. (Published)
A.F.M., Fadzir and Siti Ilyani, Rani and Jolius, Gimbun (2020) Dispersion of irregular particles during free fall. In: 4th International Conference on Engineering Technology, ICET 2019 , 6-7 July 2019 , Darul Iman Training Centre (DITC)Teluk Kalong, Kemaman, Terengganu. pp. 1-5., 1532. ISSN 1742-6596
Abdul, Wahab and Zaidi, Embong and Muzamir, Hasan and Musa, Habib and Uz Zaman, Qamar and Ullah, Hidyat (2020) Peat soil engineering and mechanical properties improvement under the effect of EKS technique at Parit Kuari, Batu Pahat, Johor, West Malaysia. Bulletin of the Geological Society of Malaysia, 70. pp. 133-138. ISSN 0126-6187. (Published)
Abdulbari, Hayder A. and Jaber, Aqeel S. and Shalash, Nadheer A. and Abdalla, Ahmed N. (2020) Garra Rufa‐inspired optimization technique. International Journal of Intelligent Systems, 35 (-). pp. 1831-1856. ISSN 08848173 (Print); 1098-111X (Online). (Published)
Abdulkarim Abdulrahman, Mohamed Suliman and Ruzinah Isha, Isha and Mazrul Nizam, Abu Seman and Abdul Latif, Ahmad (2020) Synthesis and characterization of TiO2 and palm oil fiber ash hybrid photocatalysts for water pretreatment. Maejo International Journal of Energy and Environmental Communication, 2 (3). pp. 1-10. ISSN 2673-0537. (Published)
Abdullah, Z. and Mohamad Heerwan, Piee and I M, Izhar and M A, Zakaria (2020) Study the influence of distance in Artificial Potential Field (APF) for Autonomous Emergency Braking System (AEB) on longitudinal motion. IOP Conf. Series: Materials Science and Engineering, 1068 (012015). pp. 1-10. ISSN 1757-8981 (Print) 1757-899X (Online). (Published)
Ahmad Fakhri, Ab. Nasir and Eng, Seok Nee and Chun, Sern Choong and Ahmad Shahrizan, Abdul Ghani and Anwar, P. P. Abdul Majeed and Asrul, Adam and Mhd, Furqan (2020) Text-based emotion prediction system using machine learning approach. In: 6th International Conference on Software Engineering and Computer Systems, ICSECS 2019 , 25 - 27 September 2019 , Vistana Kuantan City Center, Kuantan, Pahang. pp. 1-11., 769 (1). ISSN 1757-8981
Ahmad Kamil, Arshad and Ekarizan, Shaffie and Fauzilah, Ismail and Putra Jaya, Ramadhansyah (2020) Cold in-place recycling for flexible pavements. In: GREEN Infrastructure : Materials and Techniques. Universiti Malaysia Perlis, Perlis, pp. 49-76. ISBN 978-967-0922-90-4
Ahmmad Shukrie, Md Yudin and A., Saat and Mohamad Firdaus, Mohd Yasin (2020) Combustion characteristics of biogas flame from Palm Oil Mill Effluent (POME) at variable equivalence ratio. In: 5th International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 September 2020 , Kuala Lumpur, Malaysia. pp. 1-21.. (Unpublished)
Ahmmad Shukrie, Md Yudin and Oumer, A. N. and N. F. M., Roslan and Mohd Azlan, Zulkarnain (2020) Computational and experimental study on pressure drop in a fluidised bed with different air distributor designs. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 8043 -8051. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Ainizar, Mustapa (2020) Menyelesaikan masalah perancangan jujukan pemasangan menggunakan algoritma penapis Kalman diselakukan. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zuwairie, Ibrahim).
Ainul Farhani, Ahmad Nizam and Muthiyah, Kalaiselvan and Mohd Sabri, Mahmud (2020) Free fatty acid formation in oil palm fruits during storage. In: 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-7., 991 (012009). ISSN 1757-8981 (Print); 1757-899X (Online)
Al Saffar, Zaid Hazim and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar and Saleem, Mhmood Khleel and Lai, Jau Choy and Putra Jaya, Ramadhansyah (2020) A review on rejuvenating materials used with reclaimed hot mix asphalt. Canadian Journal of Civil Engineering. ISSN 0315-1468 (Print); 1208-6029 (Online). (Published)
Alia Aqilah, Ghazali (2020) Development of polyether block amide (PEBAX) nanocomposite membranes using nanoadsorbent from agricultural wastes as fillers for gas separation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Alia Aqilah, Ghazali and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Potential of adsorbents from agricultural wastes as alternative fillers in mixed matrix membrane for gas separation: A review. Green Processing and Synthesis, 9. pp. 219-229. ISSN 2191-9550. (Published)
Alias, Mohd and M. H. L., Adnan and Nor Bahiyah, Baba and Zainal Ariffin, Selamat and Ahmad Nasser, Mohd Rose and Saiful Bahri, Mohamed (2020) Optimization of surface roughness and tool wear on AISI 4140 using coated Ni-YSZ for CNC turning process. In: 4th International Conference on Engineering Technology, ICET 2019 , 6-7 July 2019 , Darul Iman Training Centre (DITC)Teluk Kalong, Kemaman, Terengganu. pp. 1-12., 1532 (1). ISSN 1742-6588 (print); 1742-6596 (online)
Aljaerani, Hatem Ahmad and M., Samykano and Pandey, A. K. and K., Kadirgama and Saidur, R. (2020) Thermo-physical properties and corrosivity improvement of molten salts by use of nanoparticles for concentrated solar power applications: a critical review. Journal of Molecular Liquids, 314 (113807). pp. 1-20. ISSN 0167-7322. (Published)
Anas, Ibrahim and Muhamad Zahim, Sujod (2020) Variable switching frequency hybrid PWM technique for switching loss reduction in a three-phase two-level voltage source inverter. Measurement, 151 (107192). pp. 1-8. ISSN 0263-2241. (Published)
Anas, Ibrahim and Muhamad Zahim, Sujod (2020) The impact of variable DC-Bus Voltage Control on the inverter lifetime in electric vehicle applications. In: IEEE Symposium on Industrial Electronics & Applications (ISIEA2020) , 17 July 2020 , TBD, Malaysia. pp. 1-6.. ISBN 978-1-7281-6614-8
Anwar Ilmar, Ramadhan and W. H., Azmi and R., Mamat (2020) Heat transfer characteristics of car radiator using tri-hybrid nanocoolant. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-10., 863 (1). ISSN 17578981
Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)
Chia, Vi Vien and Pang, Sook Fun and Abdullah, Sureena and Yusoff, Mashitah and Gimbun, Jolius (2020) Microwave-assisted extraction of andrographolide, 14-deoxy-11,12- didehydroandrographolide and neoandrographolide from andrographis paniculata: an optimisation study. Current Nutrition & Food Science, 16. pp. 1-8. ISSN 2212-3881. (Published)
Chia, Vi Vien and Pang, Sook Fun and Jolius, Gimbun (2020) Mass spectrometry analysis of auxiliary energy-induced terpenes extraction from Andrographis Paniculata. Industrial Crops and Products, 155 (112828). pp. 1-7. ISSN 0926-6690. (Published)
Chin, Siew Choo and Tee, Kong Fah and Tong, Foo Sheng and Doh, Shu Ing and Jolius, Gimbun (2020) External strengthening of reinforced concrete beam with opening by bamboo fiber reinforced composites. Materials and Structures, 53 (6). pp. 1-12. ISSN 1359-5997. (Published)
Chin, Siew Choo and Tong, F. S. and Doh, Shu Ing and Lim, Kar Sing and Jolius, Gimbun (2020) Effect of soil burial on mechanical properties of bamboo fiber reinforced epoxy composites. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (052016). ISSN 1757-899X
Chong, Beng Wei and Rokiah, Othman and Chan, Yee Ying and Ramadhansyah, Putra Jaya and Doh, Shu Ing and Mangi, Sajjad Ali (2020) Properties of mortar with fine eggshell powder as partial cement replacement. Materials Today: Proceedings, 46 (4). pp. 1574-1581. ISSN 2214-7853. (Published)
Chong, Beng Wei and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Xiaofeng, Li (2020) Properties of concrete with eggshell powder: a review. Physics and Chemistry of the Earth, Parts A/B/C, 120. p. 1. ISSN 1474-7065. (Published)
Cui, ZiZhi and Jing, Xin and Hao, JiaXing and Doh, Shu Ing (2020) Analysis of capillary water migration law of compacted loess in Ningxia. Polish Journal of Environmental Studies, 30 (1). pp. 61-70. ISSN 1230-1485. (Published)
Dahawi, Yahya Ayesh and Abdul Halim, Abdul Razik (2020) A review of pyrolysis of oil palm empty fruit bunches (EFB) to produce bio-energy productions. In: The 4th National Conference For Postgraduate Research (NCON-PGR 2020) , 9 December 2020 . pp. 435-454.. ISBN 978-967-2831-35-8
Edriyana, Abd Aziz and Syazwan, N. Moni and Noraini, Yussof (2020) A Review of Water Footprint Assessment in Water Services. In: National Conference for Postgraduate Research (NCON-PGR 2020) , 9 December 2020 , Virtual Mode. pp. 1-9..
F. H., Zainuddin and Chua, Gek Kee and Chew, Few Ne and Rozaimi, Abu Samah and Siti Hatijah, Mortan and Noraziah, Abu Yazid (2020) Effect of type of nitrogen sources and concentration on protease production: fish waste hydrolysate as a potential low cost source. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-10., 991 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Farah Hafidzah, Ahmad and Mohd Bijarimi, Mat Piah and Waleed, Alhadadi and Suriyati, Salleh and Mohammad Norazmi, Ahmad and Erna, Normaya (2020) Statistical study on the interaction factors of polypropylene-grafted-maleic anhydride(PP-g-MA) with graphene nanoplatelet (GNP) at various poly (lactic acid)/polypropylene (PLA/PP) blebds ratio. Indonesian Journal of Chemistry, 21 (1). pp. 1-9. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)
Farah Nurshahida, Mohd Subakir and Nazikussabah, Zaharudin and Subramaniam, Suganthi R. and W. I., Wan Faizal and Nurul Aini, Mohd Azman (2020) Physicochemical, physical characteristics and antioxidant activities of three edible red seaweeds (Kappaphycus alvarezii, Eucheuma spinosum and Eucheuma striatum) from Sabah, Malaysia. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 1-8., 991 (012001). ISSN 1757-8981
Faten, Ahmad Albtoush and Doh, Shu Ing and Abdul Rahimi, Abdul Rahman (2020) Underlying factors of cost overruns in developing countries: multivariate analysis of Jordanian projects. In: 4th National Conference on Wind and Earthquake Engineering (NCWE 2020) , 16 Oct & 17 Oct 2020 , Virtual Conference. pp. 1-17..
Faten, Albtoush and Doh, Shu Ing and Abdul Rahimi, Abdul Rahman and Ja’far A., Aldiabat Al-Btoosh and Syeda Maria, Zaidi (2020) Factors affecting the accuracy of cost estimate in construction projects: a review. In: National Conference for Postgraduate Research (NCON-PGR 2020) , 9 December 2020 , Virtual Mode. pp. 1-8..
Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2020) A web-based ergonomics assessment system for prioritizing critical work-related musculoskeletal disorders risk factor. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-17., 788 (012024). ISSN 1757-899X
Fengrong, Han and Izzeldin Ibrahim, Mohamed Abdelaziz and Xinni, Liu and Kamarul Hawari, Ghazali and Wang, Hao (2020) A survey on DV-Hop localization techniques in Three-dimensional wireless sensor networks. International Journal of Online and Biomedical Engineering (iJOE), 16 (10). pp. 24-38. ISSN 2626-8493. (Published)
Gebremariam, Mebrahitom Asmelash and Saptaji, Kushendarsyah and Mohd Azmir, Mohd Azhari and Zamzuri, Hamedon and Ahmad Razlan, Yusoff and Muhammed Nafis, Osman Zahid (2020) Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling. , [Research Book Profile: Research Report] (Unpublished)
Ghiasi, Pedram and Salehi, Amar and Hoseini, S. S. and Najafi, G. and R., Mamat and Balkhaya, . and Fitri, Khoerunnisa (2020) Investigation of the effect of flow rate on fluid heat transfer in counter-flow helical heat exchanger using CFD method. CFD Letters, 12 (3). pp. 98-111. ISSN 2180-1363. (Published)
H., Badli and Siti Zubaidah, Sulaiman and M. N., Arifin and N., Semawi and Izirwan, Izhab and Siti Hajar Noor, Shaarani and Rohaida, Che Man and Siti Kholijah, Abdul Mudalip and I., Arshad (2020) The Influence of Ethylene Gas Concentration on LDPE/C2H4 Hybrid Explosion Process and its Severity. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-8., 991 (012119). ISSN 1757-899X
Hong, J. Y. and Saffuan, Wan Ahmad and Azlan, Adnan and Khairunisa, Muthusamy and Nur Farhayu, Ariffin and Fadzil, Mat Yahaya and Sharifah Maszura, Syed Mohsin (2020) Seismic performance and cost analysis for reinforced concrete school building under different type of soil. Physics and Chemistry of the Earth, Parts A/B/C, 120 (102933). pp. 1-5. ISSN 1474-7065. (Published)
Hossain, Sk Safdar and Tarek, Mostafa and Thurga Devi, Munusamy and Karim, Kaykobad Md. Rezaul and Roopan, Selvaraj Mohana and Sarkar, Shaheen M. and Cheng, C. K. and Khan, Maksudur R. (2020) Facile synthesis of CuO/CdS heterostructure photocatalyst for the effective degradation of dye under visible light. Environmental Research, 188 (109803). pp. 1-12. ISSN 0013-9351. (Published)
Ibrahim, Mohammad Sollehudin and Peeie, M. H. (2020) The dynamic behavior investigation of electric power wheelchair during the obstacle avoidance. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012074). ISSN 1757-8981
Imtiaz, Ali Laghari and Mahendran, Samykano and Pandey, A. K. and K., Kadirgama and Tyagi, V. V. (2020) Advancements in PV-thermal systems with and without phase change materials as a sustainable energy solution: energy, exergy and exergoeconomic (3E) analytic approach. Sustainable Energy & Fuels, 4 (10). pp. 4956-4987. ISSN 23984902. (Published)
Intan Bazliah, Mohd (2020) Developing an integrated model between QFD and AHP for assembly line : case study at an electronic company. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ibrahim, Abdullah).
J. C., Jalani and Z. I. M., Arshad and Siti Hajar Noor, Shaarani and Rohaida, Che Man and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman (2020) Isolation and characterization of PLA-degrading bacteria from landfill soilat mesophilic temperature. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-8., 991 (012004). ISSN 1757-899X
J. C., Jalani and Zatul Iffah, Mohd Arshad and Shalyda, Md Shaarani and Rohaida, Che Man and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman (2020) Isolation and characterization of PLA-degrading bacteria from landfill soil at mesophilic temperature. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-8., 991 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)
Jaliliantabar, Farzad and Najafi, Gholamhassan and Rizalman, Mamat and Ghobadian, Barat (2020) Prediction of maximum in-cylinder pressure by adaptive neuro-fuzzy inference system method. IOP Conf. Series: Materials Science and Engineering, 788 (012066). pp. 1-11. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)
James Lau, Tze Chen (2020) Thermophysical properties charaterisation of water based mango oxide hybrid nanofluid. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Joshi, Rahil and Ezzaty Faridah Nor, Mohd Hussin and Soh, Ping Jack and Jamlos, M. F. and Herwansyah, Lago and Azremi, Abdullah Al-Hadi and Podilchak, Symon K. (2020) Dual-band, dual-sense textile antenna with AMC backing for localization using GPS and WBAN/WLAN. IEEE Access, 8 (9090212). pp. 89468-89478. ISSN 2169-3536. (Published)
Juliawati, Alias (2020) Role of aluminium on the microstructure and corrosion behaviour of magnesium prepared by powder metallurgy method. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 1-8. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Juraidah, Ahmad and Mohd Rosli, Hainin and Ekarizan, Shaffie and Khairil Azman, Masri and Mohd Amin, Shaffi (2020) Effect of temperature on phase angle and dynamic modulus of asphalt mixtures using SPT. Materials Science Forum, 1007. pp. 99-104. ISSN 0255-5476. (Published)
Kabbashi, Nassereldeen Ahmed and Jami, Mohammed Saedi and Nour, A. H. and Noor Illi, Mohamad Puad (2020) Rainwater harvesting quality assessment and evaluation: IIUM case study. IIUM Engineering Journal, 21 (1). pp. 12-22. ISSN 1511-788X. (Published)
Kamaliah, Abdul Samad and Norazwina, Zainol and Hafizuddin, Wan Yussof and Zulsyazwan, Ahmad Khushairi and Nurul Shareena Aqmar, Mohd Sharif and Nur Syahirah, Mohd Syukri (2020) Isolation, identification and characterization of soil bacteria for the production of ferulic acid through co-culture fermentation using banana stem waste. SN Applied Sciences, 2 (3). pp. 1-12. ISSN 2523-3971. (Published)
Kesavarma, Seluraju and E. H., Lee and M., Samykano and K., Kadirgama and M. M., Rahman and A. G. N., Sofiah (2020) Flextural properties of 3D printed Copper-Filler Polylactic Acid (Cu-PLA). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-11., 788 (012051). ISSN 1757-8981 (Print), 1757-899X (Online)
Khairunisa, Muthusamy and Mohd Hafizuddin, Rasid and Nurul Nabilah, Isa and Nurliyana Hanis, Hamdan and Nurul Atikah Shafika, Jamil and Mokhtar Albshir Budiea, Ahmed and Saffuan, Wan Ahmad (2020) Mechanical properties and acid resistance of oil palm shell lightweight aggregate concrete containing coal bottom ash. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 47-50., 41. ISSN 2214-7853
Khalid Adam, Ismail Hammad and Mohamed, Izzeldin I. and Ahmed, Nidal A. and Younis, Younis M. and Elfadil, Nazar (2020) Big Data Technique for the Weather Prediction using Hadoop MapReduce. International Journal of Modern Trends in Engineering and Research (IJMTER), 7 (5). pp. 1-6. ISSN 2349–9745. (Published)
Khor, Ai Chia and K. F., Chong and Mohd Rusllim, Mohamed (2020) Characterization of Positive Porous Electrode Felt for Organic Redox Flow Battery Application. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29th July 2019 , Kuantan, Pahang, Malaysia. pp. 899-905., 632. ISBN 978-981-15-2317-5
Lee, Z. P. and A. R., Rahimi and Doh, Shu Ing (2020) Key drivers for adopting design build: A comparative study between project stakeholders. Physics and Chemistry of the Earth, Parts A/B/C (102945). ISSN 1474-7065. (In Press / Online First) (In Press / Online First)
Lee, Zhen Ping and Rahimi, A. and Doh, Shu Ing (2020) Critical success factors for implementing design-build: analysing Malaysian Public Projects. Journal of Engineering, Design and Technology. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)
Li, Xiaofeng and Doh, Shu Ing and Feng, Weiying and Albtoosh, Ja'far A. Aldiabat and Chong, Beng Wei (2020) The mechanical properties of concrete incorporating steel slag as supplementary cementitious material. Key Engineering Materials, 879. p. 81. ISSN 1013-9826 (print); 1662-9795 (online). (Submitted) (Submitted)
Lim, Sheh Hong and Mohd Azrul Hisham, Mohd Adib and Muhammad Uzair, Matalif and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan (2020) Modeling and simulation of blood flow analysis on simplified aneurysm models. In: IOP Conference Series: Materials Science and Engineering, International Conference on Technology, Engineering and Sciences (ICTES2020) , 17-18 April 2020 , Penang, Malaysia. pp. 1-9., 917 (012067). ISSN 1757-899X
M., Zalinawati and Siregar, J. P. and Tezara, C. and Jaafar, J. and M. H. M., Hamdan and Oumer, A. N. and T., Rihayat (2020) Effect of surface modification on mechanical properties of buri palm (Corypha Utan) fibre composite reinforcement. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8298-8309. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
M. F. F., Ab Rashid and Mohd Abdul, Hadi Osman (2020) Optimisation of energy efficient hybrid flowshop scheduling problem using firefly algorithm. In: 10th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2020 , 18 - 19 April 2020 , Malaysia. pp. 36-41.. ISBN 978-1-7281-5033-8
M.M., Razali and M. F. F., Ab Rashid and M. R. A., Make (2020) Assessment of metaheuristic algorithms to optimize of mixed-model assembly line balancing problem with resource constraints. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 73-83. ISSN 2636-9575. (Published)
Md. Abdur, Rahim and Rahman, Md. Arafatur and Rahman, M. M and Asyhari, A. Taufiq and Alam Bhuiyan, Md. Zakirul and Ramasamy, D. (2020) Evolution of IoT-enabled connectivity and applications in automotive industry: A review. Vehicular Communications, 27. pp. 1-15. ISSN 2214-2096. (Published)
Md.Rezaul, Karim and Tarek, Mostafa and Shaheen, M. Sarkar and Mouras, Rabah and Ong, Huei Ruey and Hamidah, Abdullah and Cheng, C. K. and Khan, Md. Maksudur Rahman (2020) Photoelectrocatalytic reduction of CO2 to methanol over CuFe2O4@PANI photocathode. International Journal of Hydrogen Energy, 46 (48). pp. 1-12. ISSN 0360-3199. (Unpublished) (Unpublished)
Mebrahitom, A. (2020) Lets celebrate. Kolej Kejuruteraan Bulletin, 1 . p. 19. ISSN 2773-5346
Mebrahitom, Asmelash Gebremariam (2020) Redefining and Restructuring Engineering. Kolej Kejuruteraan Bulletin, 1 . pp. 5-8. ISSN 2773-5346
Mohamad Saufie, Rosle and Mohd Saberi, Mohamad and Yee, Wen Choon and Zuwairie, Ibrahim and González-Briones, Alfonso and Chamoso, Pablo and Corchado, Juan Manuel (2020) A Hybrid of Particle Swarm Optimization and Harmony Search to Estimate Kinetic Parameters in Arabidopsis thaliana. Processes, 8 (921). pp. 1-12. ISSN 2227-9717. (Published)
Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Flux model development and synthesis optimization for an enhanced GO embedded nanocomposite membrane through FFD and RSM approach. Heliyon, 6 (11). pp. 1-13. ISSN 2405-8440. (Published)
Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Hydrophilic enhancement of Polysulfone membrane via Graphene Oxide embedded thin film nanocomposite for Isopropanol dehydration. Vacuum, 180 (109569). pp. 1-4. ISSN 0042-207X. (Published)
Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Super selective dual nature GO bridging PSF-GO-Pebax thin film nanocomposite membrane for IPA dehydration. Polymer-Plastics Technology and Materials, 60 (6). pp. 670-679. ISSN Print: 2574-0881 Online: 2574-089X. (Published)
Mohamad Syafiq, Abdul Wahab and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2020) Super selective dual nature GO bridging PSF-GOPebax thin film nanocomposite membrane for IPA dehydration. Polymer-Plastics Technology and Materials, 60 (6). pp. 670-679. ISSN Print: 2574-0881 Online: 2574-089X. (Published)
Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Ahmad, M. R. and Asghar, A. and Tezara, C. and Jaafar, J. and Muhamad, Zalinawati (2020) Characterisation of the woven fabric of jute, ramie and roselle for reinforcement material for polymer composite. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1705-1710., 46 (169722). ISSN 2214-7853
Mohammed, Marwah Noori and Kamal, Yusoh and Jun Haslinda, Haji Sharifuddin (2020) Thermal and structure analysis based on exfoliation of clay in thermosensitive polymer by in-situ polymerization. Indonesian Journal of Chemistry, 20 (1). pp. 88-95. ISSN 14119420. (Published)
Mohd Affandi, Mohd Ali and Jolius, Gimbun and Lau, Kun Lu and Cheng, C. K. and Vo, Dai-Viet N. and Lam, Su Shiung and R. M., Yunus (2020) Biodiesel synthesized from waste cooking oil in a continuous microwave assisted reactor reduced PM and NOx emissions. Environmental Research, 185. p. 109452. ISSN 0013-9351. (Published)
Mohd Azrul Hisham, Mohd Adib (2020) Community. Kolej Kejuruteraan Bulletin, 1 . p. 18. ISSN 2773-5346
Mohd Azrul Hisham, Mohd Adib and Lim, Sheh Hong and Mohd Shafie, Abdullah and Radhiana, Hassan and Wada, Shigeo (2020) A perspective review: Technical study of combining phase contrast magnetic resonance imaging and computational fluid dynamics for blood flow on carotid bifurcation artery. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7609-7621. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni (2020) Enhanced brady-tachy heart automotive (BT-Heartomotive) device for heart rate monitoring during driving. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). 7599 -7606. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Mohd Faizal, Ali Akhbar (2020) Numerical and experimental investigations on temperature and thermal damage in cortical bone drilling. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Razlan, Yusoff).
Mohd Hafizil, Mat Yasin and R., Mamat and Syazwana, Sapee and Ahmad Fitri, Yusop and Mohd Hafiz, Ali (2020) Analysis of cylinder pressure cyclic variability operating with butanol blends in a diesel engine. In: Energy Security and Chemical Engineering Congress, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur; Malaysia. pp. 1-6., 736 (3). ISSN 1757-8981
Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni (2020) The comprehensive study of product criteria on infant-wrap (InfaWrap) device: engineering perspective. Journal of Physics: Conference Series, 1529 (052082). pp. 1-9. ISSN 052082. (Published)
Mohd Muzafar, Ismail and Jeefferie, Abd Razak and Ramli, Junid and Nor Aisah, Khalid and Faiz, Arith and Maizatul Alice, Meor Said (2020) The mixture material of dried straw and kapok for acoustic treatment for UTeM mosque. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual, Malaysia. pp. 1-6., 957 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Mohd Rosli, Hainin and Nur Izzi, Md. Yusoff (2020) Pembinaan jalan guna jermang keluli lestarikan teknologi hijau. UMP News .
Mohd Rosli, Hainin and Nur Izzi, Md. Yusoff (2020) Turapan asfalt berliang alternatif urus air larian ribut. Berita Harian .
Mohd Rosli, Hainin and Nur Izzi, Md. Yusoff (2020) Turapan sisa plastik buat jalan raya lebih lestari. Berita Harian .
Muhammad Faris, Ramli and Kishendran, Muniandy and Asrul, Adam and Ahmad Fakhri, Ab. Nasir and Mohd Ibrahim, Shapiai (2020) Indoor occupancy estimation using carbon dioxide concentration and neural network with random weights. In: IOP Conference Series: Materials Science and Engineering, The 6th International Conference on Software Engineering & Computer Systems , 25-27 September 2019 , Pahang, Malaysia. pp. 1-9., 769 (012011). ISSN 1757-899X
Muhammad Fat-Hi Al Juwaini, Pahrol (2020) Bauxite stabilization using gypsum and vermicompost against liquefaction in solid bulk cargoes. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hasan, Muzamir).
Muhammad Mukhtar, Noor Awalludin (2020) Micro-explosion phenomenon of tri-fuel emulsion. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).
Muhammad Razif, Abdullah Make and M. F. F., Ab Rashid (2020) Optimisation of two-sided assembly line balancing with resource constraints using modified particle swarm optimisation. Scientia Iranica. pp. 1-38. ISSN 1026-3098. (Published)
Muhammad Ridzuan, Kamaruzaman and Jiang, Xiao Xia and Hu, Xiu De and Chin, S. Y. (2020) High yield of isosorbide production from sorbitol dehydration catalysed by Amberlyst 36 under mild condition. Chemical Engineering Journal, 388 (124186). pp. 1-10. ISSN 1385-8947. (Published)
Muhammad Sheraz, Ahmad (2020) Development of phosphorus-doped noble metal (Pt, Pd) electrocatalysts for selective oxidation of glycerol to value added chemicals. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Musfirah, Abdul Hadi and Jaharah, A. Ghani (2020) Enhancement of surface integrity in cryogenic high speed ball nose end milling process of inconel 718. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 512-518.. ISBN 978-981-15-0950-6
Muzahid, Abu Jafar Md and Syafiq Fauzi, Kamarulzaman and Rahim, Md Abdur (2020) Learning-based conceptual framework for threat assessment of multiple vehicle collision in autonomous driving. In: IEEE Emerging Technology in Computing, Communication and Electronics (ETCCE 2020) , 21-22 December 2020 , United International University (UIU)-Virtual, Dhaka, Bangladesh. pp. 1-7., 20. ISBN 78-1-6654-1962-8
N., Zainol and Abdul Sahli, Fakharudin and Nor Ilyya Syahira, Zulaidi (2020) Model optimization using artificial intelligence algorithms for biological food waste degradation. In: Advances in Waste Processing Technology. Springer, Singapore, pp. 173-181. ISBN 9789811548208
N. H., Ibrahim and Mohd Sabri, Mahmud and Said, Nurdin (2020) Microwave-assisted extraction of β-sitosterol from cocoa shell waste. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-13., 991 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
N. H., Ramli and C. S., Zakaria and M. S., Mohd Sueb and Sunarti, Abd Rahman and N. E., Badrul Hisham (2020) Elucidation of flux decline phenomenon in ultrafiltration of polydisperse silica solution. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (022097). ISSN 1757-8981
N. R., Abu Sepian and Nur Hidayah, Mat Yasin and Norazwina, Zainol (2020) Characterization of gel beads used for immobilization of chlorella vulgaris and enhancement its density for lipid production. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-13., 991 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
N. S., Jeff Sumardee and A. R., Mohd Hairul and Siti Hatijah, Mortan (2020) Effect of inoculum size and glucose concentration for bacterial cellulose production by Lactobacillus acidophilus. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-6., 991 (012054). ISSN 1757-899X
Nadiah, Mokhtar and F. A., Aziz and Edriyana, Abd Aziz and Hasmanie, Abdul Halim and A., Aris (2020) The feasibility of macro alga E.spinosum for colour removal from real textile wastewater. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-10., 991 (012098). ISSN 1757-8981 (Print), 1757-899X (Online)
Najihah, Mohd Ali and Fatimah, Dzaharudin and Erny Afiza, Alias (2020) Effects of varying ultrasound parameters on the oscillation of a microbubble near a boundary. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019 , 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-8., 788 (1). ISSN 1757-8981 (Print); 1757-899X (Online)
Nizam, A. F. A. and Azri, M. E. M. and Mior Ahmad Khushairi, Mohd Zahari and Mohd Sabri, Mahmud (2020) Application of infrared spectroscopic analysis for quantification of free fatty acid content at palm oil mills. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-10., 991 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Noorhafiza Diyana, Yahya and Zatul Iffah, Mohd Arshad and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman and Rohaida, Che Man and Shalyda, Md Shaarani @ Md Nawi and Mohd Hairul, Ab. Rahim (2020) Screening of extraction buffer concentration for protease extraction from the leaves of Syzygium polyanthum using full factorial design. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 736 (022082). ISSN 1757-8981
Nor Aisah, Khalid and Jeefferie, Abd Razak and Hazman, Hasib and Mohd Muzafar, Ismail and Noraiham, Mohamad and Ramli, Junid and Poppy, Puspitasari (2020) A short review on polyaniline (PANI) based nanocomposites for various applications: enhancing the electrical conductivity. In: IOP Conference Series: Materials Science and Engineering; 2020 International Conference on Sustainable Materials, ICoSM 2020 , 3 September 2020 , Pahang, Virtual, Malaysia. pp. 1-8., 957 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Norazlianie, Sazali and Muhammad Ashraf, Fauzi (2020) Teroka potensi membran karbon sektor pembuatan. Berita Harian .
Norazlianie, Sazali and Nurul, Widiastuti and Triyanda, Gunawan and Hamzah, Fansuri and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail (2020) P84/zcc hollow fiber mixed matrix membrane with pdms coating to enhance air separation performance. Membranes, 10 (10). pp. 1-13. ISSN 2077-0375. (Published)
Norazlina, Hashim (2020) Thermal and biodegradable properties of poly(lactic acid)/ carbon-based nanocomposites. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Norazwina, Zainol (2020) Teaching and learning activities. Kolej Kejuruteraan Bulletin, 1 . p. 11. ISSN 2773-5346
Nur A. A., Rahman and Mohd Aminudin, Jamlos and Mohd Faizal, Jamlos and Soh, Ping J. and Norfatihah, Bahari and Hossain, Toufiq M. (2020) Compact bidirectional circularly polarized dedicated short range communication antenna for on‐board unit vehicle‐to‐everything applications. International Journal of RF and Microwave Computer-Aided Engineering, 30 (5). pp. 1-2. ISSN 1096-4290. (Published)
Nur Afikah, Khairi @ Rosli and Mohd Azrul Hisham, Mohd Adib and Nur Hazreen, Mohd Hasni and Mohd Shafie, Abdullah (2020) Effect of hemodynamic parameters on physiological blood flow through cardiovascular disease (CVD) – the perspective review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (1). pp. 19-34. ISSN 2289-7879. (Published)
Nur Amalina, Sabuan and Mebrahitom, A. and Azmir, Azhari and Mulubrhan, Freselam and Alemu, Tamiru (2020) Investigation on the electrical conductivity of Al2O3-Ti ceramic composites using a pressureless sintering process. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (Published)
Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal profile and microstructure of wrought aluminium 7075 for semisolid metal processing. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7842 -7850. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)
Nuramira Fateha, Sukor and Rohayu, Jusoh and Nuruldiyanah Syahirah, Kamarudin (2020) Enhanced extraction of Synsepalum dulcificum (Miracle Fruit) leaves using green ultrasonication–hydrodistillation method. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 65-71., 41 (168124). ISSN 2214-7853
Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, Adarsh (2020) An experimental study on characterization and properties of eco-friendly nanolubricant containing polyaniline (PANI) nanotubes blended in RBD palm olein oil. Journal of Thermal Analysis and Calorimetry. pp. 1-15. ISSN 1588-2926. (Published)
Nurhanis Sofiah, Abd Ghafar and Ulakanathan, S. and Samykano, Mahendran and K., Kadirgama and Hussein, A. M. and Ngui, Wai Keng (2020) Template Synthesis of Ni Nanowires: Characterization and Modelling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 76-90. ISSN 2289-7879. (Published)
Nurmadiha, Osman and Mohd Faizal, Jamlos and Fatimah, Dzaharudin and Aidil Redza, Khan and You, Kok Yeow and Khairil Anuar, Khairi (2020) Real-time and predictive analytics of air quality with IoT system: A review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 107-116. ISBN 978-981-33-4597-3
Nurnajmin Qasrina Ann, Ayop Azmi and Pebrianti, Dwi and Mohammad Fadhil, Abas and Bayuaji, Luhur and Syafrullah, Muhammad (2020) Parameter prediction for Lorenz Attractor by using Deep Neural Network. Indonesian Journal of Electrical Engineering and Informatics, 8 (3). pp. 532-540. ISSN 2089-3272. (Published)
Nurul Ain Najwa, Md Fauzi and Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Mohamad Saifullah, Samsudin and Amalina Hanani, Ismail and Ahmad Kamil, Arshad and Ekarizan, Shaffie and Norhidayah, Abdul Hassan and Mohd Rosli, Hainin (2020) Volumetric properties and resilient modulus of stone mastic asphalt incorporating cellulose fiber. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-6., 712 (012028). ISSN 1757-8981 (Print), 1757-899X (Online)
Nurul Fadzlina, Jamin and Nor Maniha, Abdul Ghani and Zuwairie, Ibrahim (2020) Movable payload on various conditions of two-wheeled double links wheelchair stability control using enhanced interval type-2 fuzzy logic. IEEE Access, 8. 87676 -87694. ISSN 2169-3536. (Published)
Nurul Farhana, Abu Kassim and W. F. W., Idris and Kamal, Yusoh and Zulhelmi, Ismail (2020) Bare Conductive® role as filler in mechanical and electrical reinforcement of polyvinyl alcohol-based strain sensor. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-6., 991 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Nurul Hazlina, Noordin (2020) Uplifting communities through digital literacy in the Malaysian context the story of UMP STEM LAB. UMP News .
Nurul Najihah, Mohd Nazri and Muhammad Uzair, Matalif and Mohd Azrul Hisham, Mohd Adib (2020) Effects of blood flow patent and cross-sectional area on hemodynamic into patient-specific cerebral aneurysm via fluid-structure interaction method : A review. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019 , 30 - 31 July 2019 , Kuantan. pp. 1-8., 788 (012022). ISSN 1757-8981
Nurul Shahida, Mohd Shalahim (2020) E-Learning, COVID-19, the challenges and way forward. Kolej Kejuruteraan Bulletin, 1 . pp. 9-10. ISSN 2773-5346
Nurul Shuhada, Haji Mohamed (2020) Investigation on the microstructure development and corrosion performance of friction stir welded dissimilar AZ31/AZ91 magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Juliawati, Alias).
Ojo, Rasheed and Jamlos, M. F. and Soh, Ping Jack and Mohd Aminudin, Jamlos and Norfatihah, Bahari and Lee, Yeng Seng and Al‐Bawri, Samir Salem and Mohamad Shaiful, Abdul Karim and Khairil Anuar, Khairi (2020) A triangular MIMO array antenna with a double negative metamaterial superstrate to enhance bandwidth and gain. International Journal of RF and Microwave Computer-Aided Engineering, 30 (8). pp. 1-2. ISSN 1096-4290. (Published)
Phang, Yun Moon and Gebremariam, M. A. and Hamedon, Zamzuri B. and Azhari, Azmira (2020) Investigation on turning operation using die sinking EDM process. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 1569-1573., 46 (169722). ISSN 2214-7853
Poojitha, P. and Jolius, Gimbun and Afiqah, Yeop and Athmaselvi, K.A. (2020) Ultrasound-assisted extraction for enhanced retention of physicochemical properties of garlic powder obtained by spray-drying. Journal of Applied Pharmaceutical Science, 10 (5). pp. 127-134. ISSN 2231-3354. (Published)
Putra Jaya, Ramadhansyah (2020) Porous concrete pavement containing nanosilica from black rice husk ash. In: New Materials in Civil Engineering. Elsevier Inc., United Kingdom, pp. 493-527. ISBN 978-0-12-818961-0
Putra Jaya, Ramadhansyah and Ekarizan, Shaffie and Ahmad Kamil, Arshad and K. A., Masri and Wardati, hashim (2020) Permanent deformation investigation of rubber polymer modified binder in superpave hot mix asphalt mixture. Journal of Academia, 8 (1). pp. 45-52. ISSN 2289-6368. (Published)
Putra Jaya, Ramadhansyah and K. A., Masri and Ahmad Kamil, Arshad and Mohd Zul Hanif, Mahmud (2020) Morphological and physical characteristic of stone mastic asphalt mixture incorporating nano silica. The Open Civil Engineering Journal, 14 (1). pp. 113-125. ISSN 1874-1495. (Published)
Putra Jaya, Ramadhansyah and Mohd Haziman, Wan Ibrahim and Ahmad Farhan, Hamzah and Norwati, Jamaluddin and Mangi, Sajjad Ali (2020) Influence of bottom ash as a sand replacement material on durability of self-compacting concrete exposed to seawater. Journal of Engineering Science and Technology, 15 (1). pp. 555-571. ISSN 1823-4690. (Published)
Putra Jaya, Ramadhansyah and Mohd Haziman, Wan Ibrahim and Mangi, Sajjad Ali and Sharifah Salwa, Mohd Zuki and Supriyatno, Dadang (2020) Influence of palm oil biomass clinker and empty fruit bunch fibers on concrete properties. IIUM Engineering Journal, 21 (2). pp. 100-110. ISSN 1511-788X. (Published)
Putra Jaya, Ramadhansyah and Siti Nur Amiera, Jeffry and Norhidayah, Abdul Hassan and Haryati, Yaacob and Ekarizan, Shaffie and Kamil, Arshad (2020) Chemical and physical characteristic of nano charcoal ash from coconut shell in bitumen as alternative binder. In: GREEN Infrastructure : Materials and Techniques. Universiti Malaysia Perlis, Perlis, pp. 97-117. ISBN 978-967-0922-90-4
Putra Jaya, Ramadhansyah and Z. H., Hussein and Haryati, Yaacob and IM. K., Idham and Norhidayah, Abdul Hassan and Choy, L. J. (2020) Restoration of aged bitumen properties using maltenes. In: 2nd Global Congress on Construction, Material and Structural Engineering, GCoMSE 2019 , 26-27 August 2019 , Melaka, Malaysia. pp. 1-8., 713 (1). ISSN 1757-8981
Putra Jaya, Ramadhansyah and Z. H., Hussein and Haryati, Yaacob and M. K., Idham and S., Abdulrahman and Choy, L. J. (2020) Rejuvenation of hot mix asphalt incorporating high rap content: issues to consider. In: 5th International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2019 , 19-20 December 2019 , Johor, Malaysia. pp. 1-8., 498 (1). ISSN 1755-1315
Putra Jaya, Ramadhansyah and Zaid Hazim, Al-Saffar and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar (2020) The tailored traits of reclaimed asphalt pavement incorporating maltene: performance analyses. International Journal of Pavement Engineering. pp. 1-14. ISSN 1477-268X. (Published)
Putra Jaya, Ramadhansyah and Zaid Hazim, Al-Saffar and Haryati, Yaacob and Mohd Khairul Idham, Mohd Satar and Saleem, Mhmood Khleel and Choy, Jau Lai and Ekarizan, Shaffie (2020) Evaluating the chemical and rheological attributes of aged asphalt: synergistic effects of maltene and waste engine oil rejuvenators. Arabian Journal for Science and Engineering. pp. 1-13. ISSN 1319-8025 (print); 2191-4281 (online). (Published)
Putri Zulaiha, Razi (2020) Risk management framework for the delivery of public-private partnership (ppp) housing construction project : case study of malaysia housing programme (pr1ma). PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Rahman, Md. Arafatur and A. Taufiq, Asyhari and Ibnu Febry, Kurniawan and Ali, Md Jahan and M. M., Rahman and Karim, Mahima (2020) A scalable hybrid MAC strategy for traffic-differentiated IoT-enabled intra-vehicular networks. Computer Communications, 157. pp. 320-328. ISSN 0140-3664. (Published)
Ramadhan, A. I. and Azmi, W. H. and Mamat, Rizalman and Abdul Hamid, K. (2020) Experimental and numerical study of heat transfer and friction factor of plain tube with hybrid nanofluids. Case Studies in Thermal Engineering, 22. p. 100782. ISSN 2214-157X. (Published)
Reji Kumar, Rajamony and Mahendran, Samykano and Kumaran, Kadirgama and Pandey, Adarsh Kumar and Tyagi, V. V. (2020) Phase change materials and nano-enhanced phase change materials for thermal energy storage in photovoltaic thermal systems: a futuristic approach and its technical challenges. Renewable and Sustainable Energy Reviews, 133. pp. 1-34. ISSN 1364-0321. (Published)
Rezaul Karim, K. M. and Tarek, Mostafa and Sarkar, S. M. and Ong, H. R. and Hamidah, Abdullah and Cheng, C. K. and Khan, Maksudur R. (2020) Selective synthesis of methanol by photoelectrocatalytic reduction of CO2 over PANI-CuFe2O4 hybrid catalyst. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress 2019, ESChE 2019 , 17 - 19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (4). ISSN 1757-8981 (Print), 1757-899X (Online)
Rizalman, Mamat (2020) Let's meet. Kolej Kejuruteraan Bulletin, 1 . pp. 15-16. ISSN 2773-5346
Rohaida, Che Man and Rosli Md, Illias and Siti Hajar Noor, Shaarani and Z. I. M., Arshad and Siti Kholijah Abdul, Mudalib and S. Z., Sulaiman and S. F. Z., Mohamad Fuzi and A. A., Abdullah (2020) Effect of Tryptone Concentration on Cyclodextrin Glucanotranferase (CGTase) Excretion and Cell Lysis of Immobilized Recombinant Escherichia coli. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-8., 991 (012053). ISSN 1757-899X
Rohaida, Che Man and Shalyda, Md Shaarani and Zatul Iffah, Mohd Arshad and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman and Aizi Nor Mazila, Ramli (2020) Effect of reaction parameters on the production of cyclodextrin using cyclodextrin glucanotransferase from bacillus licheniformis. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 6 (1). pp. 39-45. ISSN 0126-8139. (Published)
Rokiah, Othman and Khairunisa, Muthusamy and Youventharan, Duraisamy and Mohd Arif, Sulaiman and Ramadhansyah, Putra Jaya and Nadiatul Adilah, Ahmad Abdul Ghanib and Sajjad Ali, Mangi (2020) Evaluation of the sulphate resistance of foamed concrete containing processed spent bleaching earth. European Journal of Environmental and Civil Engineering, 26 (8). pp. 3632-3647. ISSN 21167214. (Published)
Roshahliza, M. Ramli and Nurul Aqilah, Herman and Muhammad Ridzuan, Mazlan and Azlin Suraya, Nazaruddin and Muhammad Arshad, Tuah and Abdul Naqib Eizzaz, Abd Samad and Kamal, Othman and Yanti Marliana, Esmail (2020) Development of Robotic Rover with Controller & Vision System. International Journal of Electrical Engineering and Computer Science, 18 (2). pp. 766-773. ISSN 2502-4752. (Published)
S., Kesavarma and C. K., Kong and M., Samykano and K., Kadirgama and A. K., Pandey (2020) Bending properties of 3D printed coconut wood-PLA composite. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052031). ISSN 1757-8981
S. Z. A., Sakinah and W. H., Azmi and J., Alias (2020) Characterization of TiO2 nanopaint for automotive application. In: 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October. 2019 , Kuantan; Malaysia. pp. 1-8., 863 (1). ISSN 17578981
Sakinah, Hisham and K., Kadirgama and Mohammed, Hussein A. and Kumar, Amit and D., Ramasamy and Mahendran, Samykano and Rahman, Saidur (2020) Hybrid nanocellulose-copper (II) oxide as engine oil additives for tribological behavior improvement. Molecules, 25 (13). pp. 1-16. ISSN 1420-3049 (print); 1420-3049 (online). (Published)
Sarmin, Sumaya and Asmida, Ideris and Ethiraj, Baranitharan and Amirul Islam, Mohammad and Chin, Sim Yee and Khan, Md. Maksudur Rahman (2020) Potentiality of petrochemical wastewater as substrate in microbial fuel cell. In: IOP Conference Series: Materials Science and Engineering; Energy Security and Chemical Engineering Congress 2019, ESChE 2019 , 17-19 July 2019 , Kuala Lumpur. pp. 1-11., 736 (032015). ISSN 1757-8981
Sciortino, Flavien and Mir, Sajjad Husain and Pakdel, Amir and Oruganti, Anjaneyulu and Abe, Hideki and Witecka, Agnieszka and Dayangku Noorfazidah, Awang Sh'ri and Rydzek, Gaulthier and Ariga, Katsuhiko (2020) Saloplastics as multiresponsive ion exchange reservoirs and catalyst supports. Journal of Materials Chemistry A, 8 (34). 17713 -17724. ISSN 2050-7488 (print); 2050-7496 (online). (Published)
Shamsul Arrieya, Ariffin and Glahn, Christian and Muh, Anshar and Faiz, Daud and Tee, Tze Kiong and Nurul Hazlina, Noordin and Amirrudin, Kamsin (2020) Early investigation of the impact of mobile learning ethics student-generated activities for STEM subjects in a local Malaysian university context. International Journal of Interactive Mobile Technologies (iJIM), 14 (5). pp. 210-218. ISSN 1865-7923. (Published)
Sharif, M. Z. and Azmi, W. H. and Zawawi, N. M. M. and R., Mamat and Hamisa, A. H. (2020) R1234yf vs R134a in automotive air conditioning system: A comparison of the performance. In: IOP Conference Series: Materials Science and Engineering, Symposium on Energy Systems 2019 (SES 2019) , 1-2 October 2019 , Kuantan, Malaysia. pp. 1-10., 863 (012049). ISSN 1757-8981 (Print), 1757-899X (Online)
Sheh, Hong Lim and Mohd Azrul Hisham, Mohd Adib and Mohd Shafie, Abdullah and Nur Hartini, Mohd Taib and Radhiana, Hassan and Azian, Abd Aziz (2020) Study of extracted geometry effect on patient-specific cerebral aneurysm model with different threshold coefficient (Cthres). CFD Letters, 12 (10). pp. 1-14. ISSN 2180-1363. (Published)
Siregar, J. P. and M. R. M., Rejab and Jamiluddin, Jaafar and Zalinawati, Muhamad and Cionita, Tezara and Mawarnie, Ismail and M.H.M., Hamdan (2020) Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 1729-1734., 46. ISSN 2214-7853
Siti Amirah, Abdul Ghani and Saidatul Shima, Jamari and Sumaiya, Zainal Abidin (2020) Waste materials as the potential phase change material substitute in thermal energy storage system: A review. Chemical Engineering Communications, 208 (5). pp. 687-707. ISSN 0098-6445 (print); 1563-5201 (online). (Published)
Siti Kholijah, Abdul Mudalip and N. A., Sezali and M. R., Abu Bakar (2020) Effect of ultrasonic waves on polymorphism and crystal size distributions of mefenamic acid. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-9., 991 (1). ISSN 1757-8981 (Print); 1757-899X (Online)
Siti N. S. A., Aziz and Mazrul N. A., Seman and Syed M., Saufi (2020) A review on surface characterization techniques of polymeric membrane in forward osmosis. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-19., 736 (052026). ISSN 1757-8981
Soffarina M., Soffie and Izwan, Ismail and Nurain, Mutalib and Syarifah N., Aqida (2020) The morphological and surface roughness of magnetorheological polished AISI 6010 surface. Jurnal Tribologi, 24. pp. 80-99. ISSN 2289-7232. (Published)
Sri Atmaja, P. Rosyidi and Asmah, Hamim and Aizat, Mohd Taib and Nor Azliana Akmal, Jamaludin and Ahmed Memon, Zubair and Nur Izzi, Md. Yusoff and Mohd Rosli, Hainin (2020) Determination of deflection basin using pavement modelling computer programs and finite element method. Jurnal Teknologi (Sciences and Engineering), 82 (4). pp. 55-63. ISSN 0127-9696 (print); 2180-3722 (online). (Published)
Srinivasarao, P. and Peddakapu, K. and M. R., Mohamed and Deepika, K.K. and Sudhakar, K. (2020) Simulation and experimental design of adaptive-based maximum power point tracking methods for photovoltaic systems. Computers and Electrical Engineering, 89 (106910). pp. 1-21. ISSN 0045-7906. (Published)
Sumaiya, Zainal Abidin and Osazuwa, Osarieme Uyi (2020) An overview on the role of lanthanide series (rare earth metals) in H2 and syngas production from CH4 reforming processes. Chemical Engineering Science, 227. pp. 115863-115886. ISSN 0009-2509. (Published)
Sumaiya, Zainal Abidin and S. A. A., Ghani and Uyi Osazuwa, Osarieme and Saidatul Shima, Jamari (2020) Characterization of Stearic Acid and Paraffin Incorporated with Aluminium as Filer for the Development of Phase Change Material Composite in Thermal Energy Storage. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-8., 991 (012077). ISSN 1757-899X
Surenthiran, Gnanasekaran and Y. Y., Li and Jun Haslinda, Shariffuddin and Noor Ida Amalina, Ahamad Nordin (2020) Production of cellulose and microcellulose from pineapple leaf fibre by chemical-mechanical treatment. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-14., 991 (012055). ISSN 1757-899X
Swaminathan, Savitha and Ramalingam, Yamuna and Ranganathan, Balu and Jolius, Gimbun and Muthumariappan, S. and Mani, U. (2020) Breast cancer nutritional chemistry cachexia oncology - A clinical trials perspective. Indian Journal of Chemistry -Section A (IJC-A), 59A (9). pp. 1369-1371. ISSN 0975-0975. (Published)
Syamsyul Hairi, M. S. and Wan Salleh, W. R. and A. R., Rahimi and Doh, Shu Ing (2020) Investigating the relationship between site supervision and IBS based construction projects. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 712 (012039). ISSN 1757-899X
Tasnim, Sadia and Du, Yunchang and Rahman, M. E and Ahmadi, Muhammad Ekhlasur and Raudhah, Ahmad and Doh, Shu Ing (2020) Effect of using palm oil fuel ash on the durability of cement paste in ammonium nitrate solution. Construction and Building Materials, 257 (119597). pp. 1-10. ISSN 0950-0618. (Published)
Tasnim, Sadia and M. E, Rahman and A, Raudhah and Doh, Shu Ing (2020) The effectiveness of palm oil fuel ash cement paste to control degradation in ammonium nitrate solution. In: 3rd National Conference on Wind and Earthquake Engineering, NCWE 2019 and International Seminar on Sustainable Construction Engineering, ISCCE 2019 , 12-13 July 2019 , Kuala Lumpur. pp. 1-8., 712 (1). ISSN 1757-8981
Teara, Ashraf and Doh, Shu Ing (2020) Mechanical properties of high strength concrete that replace cement partly by using fly ash and eggshell powder. Physics and Chemistry of the Earth, Parts A/B/C, 20. p. 1. ISSN 1474-7065. (Published)
Thangavel, Mythili and S. Y., Chin (2020) Cross metathesis of plant oil: A mini review on reaction condition and catalysis. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Kuala Lumpur, Malaysia. pp. 1-12., 991 (012073). ISSN 1757-899X
Thinakaran, Narayanan and Jeefferie, Abd Razak and Intan Sharida, Othman and Noraiham, Mohamad and Mohd Muzafar, Ismail and Ramli, Junid (2020) Mechanical properties and fracture morphological observation of recycled polypropylene (rPP) filled dried banana leaves fibre (DBLF) composites : effects of sodium hydroxide (NaOH) surface treatment. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 353-360.. ISSN 2195-4356 ISBN 9789811395390
Thurga Devi, Munusamy and Chin, S. Y. and Khan, Maksudur R. (2020) Construction of hybrid g-C3N4/CdO nanocomposite with improved photodegradation activity of RhB dye under visible light irradiation. Advanced Powder Technology, 31 (7). pp. 2921-2931. ISSN 0921-8831. (Published)
Veerendra, A. S. and M. R., Mohamed and M. H., Sulaiman and K., Peddakapu (2020) An Improved Efficiency of Solar Photo Voltaic System Applications by Using DC-DC Zeta Converter. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29th July 2019 , Kuantan, Pahang, Malaysia. pp. 737-751., 632. ISBN 978-981-15-2317-5
Veerendra, A. S. and Mohd Rusllim, Mohamed and Mohd Herwan, Sulaiman and Leung, P. K. (2020) Modeling and analysis of hybrid multilevel converter for constant DC and fuel cell sources. Energy Storage, 2 (6). pp. 1-12. ISSN 2578-4862. (Published)
Veerendra, A. S. and Mohd Rusllim, Mohamed and Mohd Herwan, Sulaiman and Sudhakar, K. and Peddakapu, K. (2020) Modelling and simulation of dual sourced front-end converter for hybrid electric vehicles. International Journal of Ambient Energy. pp. 1-9. ISSN 0143-0750 (Print); 2162-8246 (Online). (In Press / Online First) (In Press / Online First)
Veerendra, A. S. and Mohd Rusllim, Mohamed and Peddakapu, K. and Sekhar, Chavali Punya (2020) Minimization of total harmonic distortion and enhancing voltage level for hybrid multilevel converter with different sources. Advanced Control for Applications: Engineering and Industrial Systems, 2 (4). pp. 1-14. ISSN 2578-0727. (Published)
W. N. A., Wan Azahar and Putra Jaya, Ramadhansyah and M., Bujang and N., Kasim and N. N., Ismail and N. M., Husain and K., Basri and N. A. A. M., Hasazli (2020) Assessment ranking for green pavement material elements. In: IOP Conference Series: Materials Science and Engineering, International Conference on Technology, Engineering and Sciences (ICTES2020) , 17-18 April 2020 , Penang, Malaysia. pp. 1-8., 917 (012015). ISSN 1757-8981 (Print), 1757-899X (Online)
Wajiha Tasnim, Urmi and Rahman, Md Mustafizur and Kadirgama, Kumaran and Ramasamy, Devarajan and Md Abdul, Maleque (2020) An overview on synthesis, stability, opportunities and challenges of nanofluids. In: Materials Today: Proceedings; 11th Malaysian Technical Universities Conference on Engineering and Technology, MUCET 2019 , 19-22 November 2019 , Pahang. pp. 30-37., 41 (168124). ISSN 2214-7853
Wan Amnin, Wan Yahaya (2020) Development of semi refined carrageenan/glycerol/a-tocopherol reinforced with cellulose nanofiber for active packaging application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).
Wan Farhana, W Idris and Nurul Farhana, Abu Kasim and Abu Hannifa, Abdullah and Zulsyawan, Ahmad Khusairi and Kamal, Yusoh and Zulhelmi, Ismail (2020) Smart “Sticky Note” for strain and temperature sensing using few-layer graphene from exfoliation in red spinach solution. Ceramics International, 46 (7). pp. 9176-9182. ISSN 0272-8842. (Published)
Wan Ismail, Ibrahim (2020) Modelling and control strategies for hydrokinetic energy harnessing. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd. Rusllim, Mohamed).
Wan N., Wan Ab Naim and Mohd J. Mohamed, Mokhtarudin and Einly, Lim and Bee, T. Chan and Azam, Ahmad Bakir and Nik A., Nik Mohamed (2020) The study of border zone formation in ischemic heart using electro-chemical coupled computational model. International Journal for Numerical Methods In Biomedical Engineering, 35 (11). pp. 1-15. ISSN 2040-7939 (print); 2040-7947 (online). (Published)
Wan Zaiton, Wan Sulaiman and Mohd Fadzil, Mohd Idris and Jolius, Gimbun and Siti Zubaidah, Sulaiman (2020) Assessment of explosibility and explosion severity of rice flour at different concentration and ignition time. Process Safety Progress, 39 (S1). pp. 1-8. ISSN 1547-5913. (Published)
Wan Zaiton, Wan Sulaiman and Mohd Fadzil, Mohd Idris and Jolius, Gimbun and Siti Zubaidah, Sulaiman (2020) Explosion of Undried and Dried Rice Flour with Ignition Time of 20 ms. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 299-305.. ISBN 978-981-15-7309-5
Wan Zaiton, Wan Sulaiman and Mohd Fadzil, Mohd Idris and Jolius, Gimbun and Siti Zubaidah, Sulaiman (2020) Explosion of rice flour at different concentration and moisture content. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-7., 736 (022027). ISSN 1757-899X
Wang, Hao and Asrul, Adam and Yang, Wenbo (2020) A review on quality management system and artificial intelligence methodology in autonomous vehicle development. In: Journal of Physics: Conference Series, The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) , 25-27 November 2019 , Bandung, Indonesia. pp. 1-10., 1529 (042070). ISSN 1742-6596
Wang, Hoa and Asrul, Adam and Han, Fengrong (2020) Improving efficiency of customer requirements classification on autonomous vehicle by natural language processing. International Journal of Computing and Digital Systems, 9 (6). pp. 1213-1219. ISSN 2210-142X. (Published)
Xinni, Liu and Kamarul Hawari, Ghazali and Fengrong, Han and Izzeldin, I. Mohd (2020) Deep learning faster region-based convolutional neural network technique for oil palm tree counting. Test Engineering & Management, 83. pp. 25410-25415. ISSN 0193-4120. (Published)
Xinni, Liu and Kamarul Hawari, Ghazali and Fengrong, Han and Izzeldin, I. Mohd and Yue, Zhao and Yuanfa, Ji (2020) Oil palm tree detection and counting in aerial images based on faster R-CNN. In: InECCE2019: Proceedings of the 5th International Conference on Electrical, Control & Computer Engineering , 29th July 2019 , Kuantan, Pahang, Malaysia. pp. 475-482., 632. ISSN 1876-1100 ISBN 9789811523168
Z. J., Johan and T. Z., Tuan Muda and Chin, Sim Yee (2020) Parametric sensitivity analysis of the separation process for n-butanol production. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 1-12., 991 (012120). ISSN 1757-8981
Zalinawati, M. and J. P., Siregar and C., Tezara and Jaafar, Jamiluddin and Oumer, A. N. and Norazlianie, Sazali and M. H. M., Hamdan (2020) The effect of fibre treatment on water absorption and mechanical properties of buri palm (corypha utan) fibre reinforced epoxy composites. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). pp. 7379-7388. ISSN 2289-4659 (print); 2231-8380 (online). (Published)
Zamri, Mohd Fawzi and Jamil, Norlida and Yusoff, A. R. (2020) Effect of rake angle and feed rate on wear and roughness in machining carbon steel 1045. In: 7th Mechanical Engineering Research Day (MERD'20) , 16 December 2020 , Kampus Teknologi UTeM (virtual), Melaka. pp. 355-356.. ISBN 978-967-2454-36-6
Zawawi, N. M. M. and Azmi, W. H. (2020) Performance of Al2O3-SiO2/PAG employed composite nanolubricant in automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 , 1 - 2 October 2019 , Kuantan. pp. 1-9., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)
Zetty Akhtar, Abd Malek and M. M., Rahman and K., Kadirgama and Maleque, M. A. (2020) An experimental investigation on thermal conductivity and viscosity of graphene doped CNTs /TiO2 nanofluid. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (3). pp. 8224-8233. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)
Zhang, M. H. and Liu, H. F. and Tian, S. and Ma, Y. C. and Doh, Shu Ing (2020) Influence of desert sand and cooling regime on the compressive strength of high strength concrete after high temperatures. In: IOP Conference Series: Materials Science and Engineering, 3rd National Conference on Wind & Earthquake Engineering and International Seminar On Sustainable Construction Engineering , 12-13 July 2019 , Kuala Lumpur, Malaysia. pp. 1-10., 712 (012019). ISSN 1757-899X
Zhang, Qian and Liu, Qiang and Liu, Haifeng and Che, JiaLing and Chen, Xiaolong and Doh, Shu Ing (2020) Effect of desert sand on the uniaxial compressive properties of mortar after elevated temperature. Physics and Chemistry of the Earth, Parts A/B/C, 121. pp. 1-29. ISSN 1474-7065. (Published)
Zulhelmi, Ismail (2020) Photo-Fenton-inspired deoxygenation of tea polyphenol–graphene by household bleach. Carbon Letters, 30 (4). pp. 449-456. ISSN 1976-4251. (Published)
Zuwairie, Ibrahim (2020) Research clusters and activities. Kolej Kejuruteraan Bulletin, 1 . pp. 12-13. ISSN 2773-5346
Zuwairie, Ibrahim and Nor Azlina, Ab. Aziz and Marizan, Mubin and Norrima, Mokhtar (2020) Synchronous-asynchronous simulated kalman filter algorithm with random switching. In: International Conference on Communication, Electrical, and Computer Networks , 25-26 January 2020 , University of Malaya. pp. 1-5.. (Unpublished)