Items where Division is "Faculty of Mechanical Engineering" and Year is 2019

Article

A. A., Razak and Zafri Azran, Abdul Majid and F., Basrawi and A. F., Sharol and M. H., Ruslan and K., Sopian (2019) A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy, 178. 314 - 330. ISSN 0038-092X. (Published)

A. A. M., Redhwan and Azmi, W. H. and M. Z., Sharif and R., Mamat and Mahendran, Samykano and G., Najafi (2019) Performance improvement in mobile air conditioning system using Al2O3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1299-1310. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

A. J. S., Hanifah and W. N. W. M. N., Hissyam and Aiman, M. H. and M., Ishak and T., Ariga (2019) Effect of copper based filler composition on the strength of brazed joint. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5090-5103. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

A. Razak, J. and Mohamad, N. and Mahamood, M. A. and Jaafar, R. and Othman, I. S. and Ismail, M. M. and Tee, L. K. and Ramli, Junid and Mustafa, Z. (2019) On the preparation of EPDM-g-MAH compatibilizer via melt-blending method. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5424 -5440. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Abdalla, Ahmed N. and Awad, Omar I. and Tao, Hai and Ibrahim, Thamir K. and R., Mamat and Hammid, Ali Thaeer (2019) Performance and emissions of gasoline blended with fusel oil that a potential using as an octane enhancer. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (8). pp. 931-947. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Abu-Samah, Asma and Knopp, Jennifer Launa and Normy Norfiza, Abdul Razak and Athirah, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, Md Ralib and Mohd Basri, Mat Nor and Chase, J. Geoffrey and Pretty, Christopher G. (2019) Model-based glycemic control in a Malaysian intensive care unit: Performance and safety study. Medical Devices: Evidence and Research, 12. pp. 215-226. ISSN 1179-1470. (Published)

Abu-Samah, Asma and Normy Norfiza, Abdul Razak and Ummu Kulthum, Jamaludin and Fatanah, M. Suhaimi and Azrina, M. Ralib (2019) Determination of favorable blood glucose target range for stochastic TARgeted (STAR) glycemic control in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 133-141. ISSN 2502-4752. (Published)

Adam, A. Y. and A. N., Oumer and G., Najafi and M., Ishak and F., Basrawi and Aklilu, T. B. (2019) State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers. Journal of Thermal Analysis and Calorimetry. pp. 1-30. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Alqadami, Abdulrahman Shueai Mohsen and Jamlos, M. F. and Mohd Aminudin, Jamlos (2019) Efficacy of a wideband flexible antenna on a multilayer polymeric nanocomposites Fe3O4-PDMS substrate for wearable applications. Current Applied Physics, 19 (11). pp. 1259-1265. ISSN 1567-1739. (Published)

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Unsteady computational study of novel biologically inspired offshore vertical axis wind turbine at different tip speed ratios: a two-dimensional study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (2). pp. 6753-6772. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Asmara, Y. P. and Sutjipto, A. G. E. and Siregar, J. P. and Kurniawan, Tedi and Jamiluddin, Jaafar (2019) Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas. International Journal of Mechanical Engineering and Robotics Research, 8 (3). pp. 374-379. ISSN 2278-0149. (Published)

Bathrinath, S. and Charan, Vadakapur Sai and Ponnambalam, S. G. and Saravanasankar, S. (2019) Identification and evaluation of criteria of agile manufacturing using dematel: a case from an indian metal fabrication industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 2 (1). pp. 61-74. ISSN 2636-9575. (Published)

C. H., Ng and C. F., Lai and S. N. M., Yahaya and S., Shamsudin and S. N., Aqida and F., Sharrifuddin (2019) Effect of initial blank temperature in hot press forming towards 22MnB5 springback failure. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5137-5149. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Che Wan, Mohd Noor and R., Mamat and Najafi, G. and Anuar, Abu Bakar and Samo, Khalid (2019) Determination of bio-diesel engine combustion pressure using neural network based model. Journal of Engineering Science and Technology, 14 (2). pp. 909-921. ISSN 1823-4690. (Published)

Dayangku Noorfazidah, Awang Sh'ri and Muhammad Abdul Hisyam, Abu Hassan and Zahiruddeen Salam, Zahari and W. S., Wan Harun (2019) Finite element simulation of equal channel angular pressing: effect of die angle and number of passes. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6402-6414. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Erdiwansyah and R., Mamat and M. S. M., Sani and Sudhakar, K. and Asep, Kadarohman and R.E., Sardjono (2019) An overview of Higher alcohol and biodiesel as alternative fuels in engines. Energy Reports, 5. pp. 467-479. ISSN 2352-4847. (Published)

Erdiwansyah, . and Mahidin, . and R., Mamat and M. S. M., Sani and Fitri, Khoerunnisa and Asep, Kadarohman (2019) Target and demand for renewable energy across 10 ASEAN countries by 2040. The Electricity Journal, 32 (10). pp. 1-10. ISSN 1040-6190. (Published)

Erdiwansyah, . and R., Mamat and M. S. M., Sani and Sudhakar, K. (2019) Renewable energy in Southeast Asia: Policies and recommendations. Science of The Total Environment, 670. pp. 1095-1102. ISSN 0048-9697. (Published)

Farah Hanani, Zulkifli and Jahir Hussain, Fathima Shahitha and W. S., Wan Harun and M. M., Yusoff (2019) Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering. International Journal of Biological Macromolecules, 122. pp. 562-571. ISSN 0141-8130. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and D., Ramasamy and M. M., Noor and G., Najafi and M., Samykano and A. S. F., Mahamude (2019) Improvement in the performance of solar collectors with nanofluids - A state-of-the-art review. Nano-Structures & Nano-Objects, 18. pp. 1-21. ISSN 2352-507X. (Published)

Farhana, K. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy and M., Samykano and G., Najafi and Nor Azwadi, Che Sidik and F., Tarlochan (2019) Significance of alumina in nanofluid technology. Journal of Thermal Analysis and Calorimetry. pp. 1-20. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Fatin Nurwahda, Ahmad and Norazlianie, Sazali and Mohd Hafiz Dzarfan, Othman (2019) Review on Development of Oxygen/Nitrogen Separations Technologies. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 249-259. ISSN 2289-7879. (Published)

Fatin Nurwahda, Ahmad and Norazlianie, Sazali and Safwan, Shabi and Nor Hasrul Akhmal, Ngadiman and Mohd Hafiz Dzarfan, Othman (2019) Oxygen separation process using ceramic-based membrane: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 1-9. ISSN 2289-7879. (Published)

Fazliana, Fauzun and S. N., Aqida and Izwan, Ismail (2019) Design of laser melting of tool steel for surface integrity enhancement. Jurnal Tribologi, 22. pp. 18-31. ISSN 2289-7232. (Published)

H., Ibrahim and Norazlianie, Sazali and I. N., Ibrahim and Mohd Syafiq, Sharip (2019) Nano-structured Cellulose as Green Adsorbents for Water Purification: A Mini Review. Journal of Applied Membrane Science & Technology, 23 (2). pp. 45-56. ISSN 2600-9226. (Published)

H., Lago and Z., Zakaria and M. F., Jamlos and P. J., Soh (2019) A wideband reconfigurable folded planar dipole using MEMS and hybrid polymeric substrates. AEU - International Journal of Electronics and Communication, 99. pp. 347-353. ISSN 1434-8411. (Published)

Hagos, F. Y. and A. Rashid, A. Aziz and Shaharin, A. Sulaiman and R., Mamat (2019) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy, 44 (1). pp. 477-486. ISSN 0360-3199. (Published)

Hasanah, Lilik and Nugroho, Harbi Setyo and Chandra, Wulandari and Budi, Mulyanti and Berhanuddin, Dilla Duryha and Mohamad Hazwan, Haron and Susthitha, Menon P. and Ahmad Rifqi, Md. Zain and Hamidah, Ida and Khairurrijal, Khairurrijal and R., Mamat (2019) Enhanced sensitivity of microring resonator-based sensors using the finite difference time domain method to detect glucose levels for diabetes monitoring. Applied Sciences, 10 (12). pp. 1-12. ISSN 2076-3417. (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2019) A Review on Factors Affecting Heat Transfer Efficiency of Nanofluids for Application in Plate Heat Exchanger. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (1). pp. 144-154. ISSN 2289-7879. (Published)

Hazman, Abu Hassan and R., Mamat and Ftwi Y., Hagos and Najafi, Gholamhassan (2019) Experimental of oxygenated fuel on diesel engine: fuel properties, performance and emission. International Journal of Integrated Engineering, 1. pp. 1-16. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. (2019) Reductions of Particulate Matter Emissions of a Diesel Engine Fueled with Oxygenated and Emulsion Fuels. Journal of Biobased Materials and Bioenergy, 13 (6). pp. 764-777. ISSN 1556-6560. (Published)

Hoseini, S. S. and G., Najafi and Ghobadian, B. and R., Mamat and Ebadi, M. T. and Yusaf, Talal (2019) Characterization of biodiesel production (ultrasonic-assisted) from evening-primroses (Oenothera lamarckiana) as novel feedstock and its effect on CI engine parameters. Renewable Energy, 130. pp. 50-60. ISSN 0960-1481. (Published)

Hossain, Toufiq Md and Jamlos, M. F. and Mohd Aminudin, Jamlos and Soh, Ping Jack and Siti Zuraidah, Ibrahim and Muammar, Mohamad Isa and Schreurs, Dominique M. M.-P. and Narbudowicz, Adam and Mohd Fairusham, Ghazali (2019) Compact broadband triple-ring five-port reflectometer for microwave brain imaging applications. IEEE Access, 7. pp. 29597-29609. ISSN 2169-3536. (Published)

Ibrahim, Thamir K. and Mohammed, Mohammed Kamil and Al Doori, Wadhah Hussein Abdulrazzaq and Al-Sammarraie, Ahmed Tawfeeq and F., Basrawi (2019) Study of The Performance of The Gas Turbine Power Plants From The Simple To Complex Cycle: A Technical Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 228-250. ISSN 2289-7879. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and D., Ramasamy and S. M., Soffie and Mohd Hafiz Dzarfan, Othman (2019) A review on vehicle radiator using various coolants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 330-337. ISSN 2289-7879. (Published)

Ihsan Naiman, Ibrahim and Norazlianie, Sazali and D., Ramasamy and Ahmad Shahir, Jamaludin and Mohd Syafiq, Sharip and Haziqatulhanis, Ibrahim (2019) Effect of impregnate nanocellulose with ethylene glycol for car radiator application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 43-50. ISSN 2289-7879. (Published)

Imran, Ali and Quazi, M. M. and Zalnezhad, E. and Sarhan, Ahmed A. D. and N. Liana, Sukiman and M., Ishak (2019) Hard anodizing of aerospace AA7075-T6 aluminum alloy for improving surface properties. Transactions of the Indian Institute of Metals, 72 (10). pp. 2773-2781. ISSN 0972-2815. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Zailan, M. B. and Azmi, W. H. (2019) Experimental analysis of SiO2-distilled water nanofluids in a polymer electrolyte membrane fuel cell parallel channel cooling plate. International Journal of Hydrogen Energy, 44 (47). pp. 25850-25862. ISSN 0360-3199. (Published)

Jaliliantabar, Farzad and Ghobadian, Barat and Carlucci, Antonio Paolo and Najafi, Gholamhassan and Rizalman, Mamat and Ficarella, Antonio and Strafella, Luciano and Santino, Angelo and De Domenico, Stefania (2019) A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine. Energy, 194 (116860). pp. 1-13. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jasri, Mohamad and Mohd Zaidi, Sidek (2019) Springback prediction using finite element simulation incorporated with hardening data acquired from cyclic loading tool. International Journal of Materials Forming and Machining Processes (IJMFMP), 6 (1). pp. 19-39. ISSN 2334-4571. (Published)

Johari, N. A. and F. R. M., Romlay and W. S., Wan Harun (2019) SS 316L/HA composite via powder injection moulding: Mechanical and physical properties. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5480 -5492. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Juliawati, Alias and W. S., Wan Harun and Mas Ayu, Hassan (2019) A Review on the Preparation of Magnesium-Based Alloys Prepared by Powder Metallurgy and the Evolution of Microstructure and Mechanical Properties. Key Engineering Materials, 796. pp. 3-10. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

K., Abdul Hamid and Azmi, W. H. and R., Mamat and Sharma, K. V. (2019) Heat transfer performance of TiO2-SiO2 nanofluids in a tube with wire coil inserts. Applied Thermal Engineering, 152. pp. 275-286. ISSN 1359-4311. (Published)

Keeran, Anamalai and Lingenthiran, Samylingam and K., Kadirgama and Samykano, Mahendran and G., Najafi and D., Ramasamy and M. M., Rahman (2019) Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1533-1544. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Khairil Anuar, Khairi and Mohd Faizal, Jamlos and Surentiran, Padmanathan and Mohd Aminudin, Jamlos and Muammar, Mohamad Isa (2019) Low insertion loss of surface mount device low pass filter at 700 MHz. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 382-388. ISSN 2302-9285. (Published)

Khodabakhshi, Farzad and L. H., Shah and Gerlich, Adrian (2019) Dissimilar laser welding of an AA6022-AZ31 lap-joint by using Ni-interlayer: novel beam-wobbling technique, processing parameters, and metallurgical characterization. Optics & Laser Technology, 112. pp. 349-362. ISSN 0030-3992. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, M. (2019) Performance evaluation of CdTe BIPV roof and façades in tropical weather conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (9). pp. 1057-1071. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Luqman Hakim, Ahmad Shah and Khodabakhshi, Farzad and Gerlich, Adrian (2019) Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. Journal of Manufacturing Processes, 37. pp. 212-219. ISSN 1526-6125. (Published)

M. A. S., Aziz Shah and M. A., Yunus and M. N., Abdul Rani and A. M., Saman and M. S. M., Sani and M. S., Mohd Zin (2019) The effect of laser stitch welding residual stress on the dynamic behaviour of thin steel structure. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5780-5790. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. F. F., Ab Rashid and A. N. M., Rose and N. M. Zuki, N. M. and F. R. M., Romlay (2019) Improved moth flame optimization algorithm to optimize cost-oriented two-sided assembly line balancing. Engineering Computations, 37 (2). pp. 638-663. ISSN 0264-4401. (Published)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2019) Integrated optimization of mixed-model assembly sequence planning and line balancing using multi-objective discrete particle swarm optimization. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 33 (3). pp. 332-345. ISSN 1469-1760. (Published)

M. H., Muhammad Sidik and S. A., Che Ghani and Mahfodzah, M. Padzi (2019) Development of a wireless surface electromyography (sEMG) signal acquisition device for power-assisted wheelchair system. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3414-3418. ISSN 2249-8958. (Published)

M. Mukhtar, N. A. and Abd Rashid, Abd Aziz and Hagos, F. Y. and M. M., Noor and K., Kadirgama and R., Mamat and Abdul Adam, Abdullah (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (diesel–ethanol–biodiesel) emulsion properties. Energies, 12 (9). pp. 1-24. ISSN 1996-1073. (Published)

M. N. M., Baharuddin and Norazwani, Muhammad Zain and Eida Nadirah, Roslin and Wan Sharuzi, Wan Harun and Zaeime, Sulong@Zakaria (2019) Physical properties of homogeneous particleboard based on acacia tree and polyurethane adhesive as a resins. International Journal of Engineering and Advanced Technology, 8 (6). pp. 3382-3387. ISSN 2249-8958. (Published)

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma (2019) Experimental investigation of free vibration analysis on fibre metal composite laminates. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5753-5763. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

M. Z., Sharif and Azmi, W. H. and A. A. M., Redhwan and R., Mamat and Najafi, G. (2019) Energy saving in automotive air conditioning system performance using SiO2/PAG nanolubricants. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1285-1297. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Manoj Kumar, Nallapaneni and Sudhakar, K. and Mahendran, Samykano (2019) Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13. pp. 1-10. ISSN 2214-157X. (Published)

Mirza, H. and Hossain, T. M. and Soh, Ping Jack and Jamlos, M. F. and Ramli, M. N. and Al-Hadi, A. A. and Hassan, E. S. and Yang, S. (2019) Deployable linear-to-circular polarizer using PDMS based on unloaded and loaded circular FSS arrays for pico-satellites. IEEE Access, 7. pp. 2034-2041. ISSN 2169-3536. (Published)

Mohamad Atif, Mohamed and Norazlianie, Sazali and Fatin Nurwahda, Ahmad and Nor Hasrul Akhmal, Ngadiman and Mohd Hafiz Dzarfan, Othman (2019) A Short Review on Membranes for Helium Separation and Purifications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 80-87. ISSN 2289-7879. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak (2019) L-statistical analysis of sound signal acquired from pulse mode laser welding for characterising weld geometry. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6987-7006. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 76-87. ISSN 1368-2148. (Published)

Mohd Jamil, A. W. and Faridah, A. A. and Nor Marzuina, F. K. N. and Zafirah, Z. F. (2019) Accuracy of conventional computations in assessing volume of small diameter logs of hopea odorata. Journal of Tropical Forest Science, 31 (1). pp. 125-133. ISSN 0128-1283. (Published)

Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah and R., Mamat (2019) Combustion, performances, and emissions characteristics of Hermetia illucens larvae oil in a direct injection compression ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (12). pp. 1483-1496. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Mohd Kamal, Kamaruzzaman and Hafiz, M. and Abdullah, Adam and Ang, F. Chen and Awad, Omar I. (2019) Combustion, performances and emissions characteristics of black soldier fly larvae oil and diesel blends in compression ignition engine. Renewable Energy, 142. pp. 569-580. ISSN 0960-1481. (Published)

Mohd Mawardi, Saari and Nurul A’in, Nadzri and A. M., Halil and M., Ishak and Kenji, Sakai and Toshihiko, Kiwa and Keiji, Tsukada (2019) Design of eddy current testing probe for surface defect evaluation. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). 6357- 6367. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Mohd Razali, Hanipah and Shahin, Mansor and M. R. M., Akramin and A. R., Razali (2019) Design and parametric characterization of flexure bearing as automotive valve spring replacement. Journal of Mechanical Engineering and Sciences (JMES), 13 (1). pp. 4704-4717. ISSN 2231-8380 (online). (Published)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and Muhammad Atif, Mohamed Azmi and Farhana, Aziz and Wan Norharyati, Wan Salleh (2019) Current Advancement by Membrane Technology: A Review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 283-290. ISSN 2289-7879. (Published)

Muhammad Arif, Abdullah and Ahmad Nasser, Mohd Rose and Zakri, Ghazalli and Ahmad Nasser, Mohd Rose (2019) A case study of energy efficient assembly sequence planning problem. 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 469 (012013). (Published)

Muhammad Arif, Abdullah and M. F. F., Ab Rashid and Z., Ghazalli (2019) Optimization of Assembly Sequence Planning Using Soft Computing Approaches: A Review. Archives of Computational Methods in Engineering, 26 (2). pp. 461-474. ISSN 1886-1784. (Published)

Muhammad Khairol Annuar, Zaini and Lee, Yen-Sian and Nurazima, Ismail and Lim, Kok-Sing and Udos, Waldo and Mohd Hafizi, Zohari and Yang, Hang-Zhou and Harith, Ahmad (2019) In-fiber Fabry Perot interferometer with narrow interference fringes for enhanced sensitivity in elastic wave detection. Optical Fiber Technology, 53. pp. 1-2. ISSN 1068-5200. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Mahendran, Samykano and G., Najafi and Nor Azwadi, Che Sidik (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130. pp. 1163-1169. ISSN 0017-9310. (Published)

N. W., Awang and D., Ramasamy and K., Kadirgama and Najafi, G. and Nor Azwadi, Che Sidik (2019) Study on friction and wear of Cellulose Nanocrystal (CNC) nanoparticle as lubricating additive in engine oil. International Journal of Heat and Mass Transfer, 131. pp. 1196-1204. ISSN 0017-9310. (Published)

N.A.S, Muhamad and Nadzirah, Mohd Mokhtar and Rosmawati, Naim and Lau, Woei Jye and A.F., Ismail (2019) A review of membrane distillation process: - Before, during and after testing. International Journal of Engineering Technology And Sciences (IJETS), 6 (1). pp. 62-81. ISSN 2289-697X (Print); 2462-1269 (Online). (Published)

Naseer, Abqaat and Faiz, Ahmad and Aslam, Muhammad and Beh, Hoe Guan and Wan Sharuzi, Wan Harun and Norhamidi, Muhamad and Muhammad Rafi, Raza and German, Randall M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Nasrul Azuan, Alang and Nikbin, Kamran M. (2019) A new approach to predict creep rupture of Grade 92 steel under multiaxial stress states. International Journal of Mechanical Sciences, 163. pp. 1-2. ISSN 0020-7403. (Published)

Norazlianie, Sazali (2019) The influence of carbonization temperature and heating rate towards carbon membrane performance: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 151-158. ISSN 2289-7879. (Published)

Norazlianie, Sazali and M. F., Ghazali and Haziqatulhanis, Ibrahim and Syafikah Huda, Pariman and Mohd Shahrizan, Moslan (2019) A Review on Hydrogen Separation through Inorganic Membrane. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 238-248. ISSN 2289-7879. (Published)

Norazlianie, Sazali and M. F., Ghazali and Juhana, Jaafar and Wan Norharyati, Wan Salleh and Mohd Hafiz Dzarfan, Othman (2019) A Short Review on SPEEK-Based Direct Methanol Fuel Cell (DMFC) for Automotive Power Systems. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2). pp. 326-336. ISSN 2289-7879. (Published)

Norazlianie, Sazali and W. N. W., Salleh and A. F., Ismail and Murakamid, Hideyuki and Iwamotoe, Yuji (2019) Oxygen separation through p84 copolyimide/nanocrystalline cellulose carbon membrane: Impact of heating rates. Chemical Engineering Communications. pp. 1-11. ISSN 1563-5201. (Published)

Norazlianie, Sazali and W. N. W., Salleh and N., Arsat and Z., Harun and K., Kadirgama (2019) P84 Co-Polyimide-based Tubular Carbon Membrane: Effect of Pyrolysis Temperature. Journal of Applied Membrane Science & Technology, 23 (1). pp. 17-24. ISSN 2600-9226. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and K., Kadirgama and F. E. C., Othman and N. H., Ismail (2019) Impact of stabilization environment and heating rates on P84 co-polyimide/nanocrystaline cellulose carbon membrane for hydrogen enrichment. International Journal of Hydrogen Energy, 44 (37). 20924--20932. ISSN 03603199. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and K. C., Wong and Y., Iwamoto (2019) Exploiting pyrolysis protocols on BTDA‐TDI/MDI (P84) polyimide/nanocrystalline cellulose carbon membrane for gas separations. Journal of Applied Polymer Science, 136 (1). pp. 1-9. ISSN 1097-4628. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and A. F., Ismail and N. H., Ismail and N., Yusof and F., Aziz and Jamiluddin, Jaafar and K., Kadirgama (2019) Influence of intermediate layers in tubular carbon membrane for gas separation performance. International Journal of Hydrogen Energy, 44 (37). pp. 20914-20923. ISSN 0360-3199. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and Nor Hafiza, Ismail and K., Kadirgama (2019) A brief review on carbon selective membranes from polymer blends for gas separation performance. Reviews in Chemical Engineering. pp. 1-24. ISSN 2191-0235. (In Press / Online First) (In Press / Online First)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail and Nur Izwanne, Mahyon and K., Kadirgama and Mohd Shahrizan, Moslan (2019) Tubular Carbon Membrane Prepared from PI/NCC: Effects of Pyrolysis Atmosphere. Chemical Engineering Transactions, 72. pp. 409-414. ISSN 2283-9216. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ihsan Naiman, Ibrahim and Haziqatulhanis, Ibrahim and Mohd Syafiq, Sharip (2019) The Influence of Thickness on Low Carbon Steel in Rapid Cooling Process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). pp. 175-182. ISSN 2289-7879. (Published)

Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Nor Hafiza, Ismail and Ahmad Fauzi, Ismail and Hideyuki, Murakami and Iwamotoe, Yuji (2019) The influence of coating-carbonization cycles toward P84 co-polyimide/nanocrystalline cellulose. Comptes Rendus Chimie, 22 (11-12). pp. 779-785. ISSN 1631-0748. (Published)

Noroozi, Siamak and A. G. A., Rahman and Eng, H. C. and Dupac, M. and Ong, Zhi Chao and Khoo, Shin Yee and Kong, K. K. (2019) A novel investigation into the application of non-destructive evaluation for vibration assessment and analysis of in-service pipes. Nondestructive Testing and Evaluation, 34 (4). pp. 413-428. ISSN 1058-9759. (Published)

Norsuhailizah, Sazali and Zawati, Harun and Tijani, Abdullahi and Faiz Hafeez, Azhar and Norazlianie, Sazali (2019) Revolution of Malaysia’s Kaolin to Metakaolin towards various application: A mini review. Journal of Modern Manufacturing Systems and Technology (JMMST), 3. pp. 114-119. ISSN 2636-9575. (Published)

Nur Fatihah, Tajul Arifin and Nur Azira Natasha, Zulkipli and Norhaniza, Yusof and Ahmad Fauzi, Ismail and Farhana, Aziz and Wan Norharyati, Wan Salleh and Juhana, Jaafar and Nik Abdul Hadi, Md Nordin and Norazlianie, Sazali (2019) Preparation and characterization of APTES-functionalized graphene oxide for CO2 adsorption. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 297-305. ISSN 2289-7879. (Published)

Nur Syawanie, Manam and W. S., Wan Harun and Mohd Halim Irwan, Ibrahim and Nur Zalikha, Khalil and Samykano, Mahendran (2019) Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding. International Journal of Manufacturing Technology and Management, 33 (1/2). pp. 37-52. ISSN 1368-2148. (Published)

Nur Zalikha, Khalil and Mohamed Feisal, Johanne and M., Ishak (2019) Influence of Al2O3 nanoreinforcement on the adhesion and thermomechanical properties for epoxy adhesive. Composites Part B: Engineering, 172. pp. 9-15. ISSN 1359-8368. (Published)

Nurul Hafiza, Ismail and Wan Norharyati, Wan Salleh and Nor Asikin, Awang and Siti Zu Nurain, Ahmad and Nurafiqah, Rosman and Norazlianie, Sazali and Ismail, A. F. (2019) PVDF/HMO ultrafiltration membrane for efficient oil/water separation. Chemical Engineering Communications. pp. 1-12. ISSN 0098-6445 (print); 1563-5201 (online). (In Press / Online First) (In Press / Online First)

Oumer, A. N. and Chen, James Lau Tze and Azizuddin, Abd Aziz (2019) A review on thermo-physical properties of bio, non-bio and hybrid nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 5875-5904. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and Azizan, As'ary and Khairil Anas, Md Rezali and M. M., Noor and Shareef, Saman M. (2019) Development of evaporative intercooler heat exchanger for vehicle charge air enhancement using CFD simulation. Journal of Mechanical Engineering and Sciences (JMES), 13 (4). pp. 6195-6217. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rasheed, Ojo and M. F., Jamlos and Ping, Jack Soh and Mohd Aminudin, Jamlos and Muammar, Mohamad Isa (2019) Bandwidth and gain enhancement of a circular microstrip antenna using a DNG split ring resonator radome. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 637-643. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Razali, Muhamad Magffierah and Kamarudin, N.H. and M. F. F., Ab Rashid and Ahmad Nasser, Mohd Rose (2019) Recent trend in mixed-model assembly line balancing optimization using soft computing approaches. Engineering Computations, 36 (2). pp. 622-645. ISSN 0264-4401. (Published)

Redhwan, A. A. M. and Azmi, W. H. and Najafi, G. and M. Z., Sharif and N. N. M., Zawawi (2019) Application of response surface methodology in optimization of automotive air-conditioning performance operating with SiO2/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1269-1283. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

S., Asri and M. F., Othman and Abdul Adam, Abdullah and Z., Abdullah and Z., Azmi (2019) Analysis of Organic Germanium Ge-132 as Cetane Improver in Diesel Combustion Process. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6134-6145. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Sahu, Alok K. and Sudhakar, K. and Sarviya, R. M. (2019) Influence of U.V light on the thermal properties of HDPE/Carbon black composites. Case Studies in Thermal Engineering, 15 (100534). pp. 1-7. ISSN 2214-157X. (Published)

Samykano, Mahendran and Selvamani, Sathish Kumar and K., Kadirgama and W. K., Ngui and Kanagaraj, G. and K., Sudhakar (2019) Mechanical property of FDM printed ABS : influence of printing parameters. International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 2779-2796. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Singh, J. and Singh, R. and Kumar, R. and M. M., Rahman and Ramakrishna, S. (2019) PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding. Journal of Thermoplastic Composite Materials, 34 (6). pp. 745-764. ISSN 1530-7980 (print); 0892-7057 (online). (Published)

Singh, Rupinder and Singh, Gurchetan and Singh, Jaskaran and Kumar, Ranvijay and M. M., Rahman and Ramakrishna, Seeram (2019) Thermomechanical investigations of PEKK-HAp-CS composites. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (11). pp. 1196-1203. ISSN 0954-4119. (Published)

Siregar, Januar Parlaungan and M. R. M., Rejab and Jamiluddin, Jaafar and Mohd Hazim, Mohd Hamdan and Bachtiar, Dandi and Tezara, C. (2019) Effect of maleated anhydride on mechanical properties of rice husk filler reinforced PLA matrix polymer composite. International Journal of Precision Engineering and Manufacturing-Green Technology, 6 (1). pp. 113-124. ISSN 2288-6206. (Published)

Siti Nur Alwani, Shafie and Wen, Xuan Liew and Nik Abdul Hadi, Md Nordin and Bilad, Muhammad Roil and Norazlianie, Sazali and Zulfan, Adi Putra and Mohd Dzul Hakim, Wirzal (2019) CO2-Philic [EMIM][Tf2N] modified silica in mixed matrix membrane for high performance CO2/CH4 separation. Advances in Polymer Technology, 2019 (2924961). pp. 1-10. ISSN 1098-2329. (Published)

Sudhakar, K. and Jenkins, M. S. and Mangal, S. and Priya, S. Shanmuga (2019) Modelling of a solar desiccant cooling system using a TRNSYS-MATLAB co-simulator : a review. Journal of Building Engineering, 24. pp. 1-8. ISSN 2352-7102. (Published)

Sudhakar, K. and Winderl, Maximilian and Priya, S. Shanmuga (2019) Net-zero building designs in hot and humid climates: A state-of-art. Case Studies in Thermal Engineering, 13. pp. 1-16. ISSN 2214-157X. (Published)

Suleiman, Akilu and Baheta, Aklilu Tesfamichael and K., Kadirgama and Padmanabhan, Eswaran and Sharma, K. V. (2019) Viscosity, electrical and thermal conductivities of ethylene and propylene glycol-based β-SiC nanofluids. Journal of Molecular Liquids, 285. pp. 780-792. ISSN 0167-7322. (Published)

Syamsutajri, Syamsol Bahri and Zawati, Harun and Wan Norhayati, Wan Salleh and Muhammad Nur Hakim, Abd Kadir and Norazlianie, Sazali and Rosniza, Hussin and Hatijah, Basri (2019) The influence of Fe doped TiO2 as inorganic additive on the properties of polysulfone ultrafitration membrane. Malaysian Journal of Fundamental and Applied Sciences, 15 (5). pp. 725-730. ISSN 2289-5981. (Published)

Vasu, Anusuiah and Hagos, F. Y. and R., Mamat and Kaur, Jesbains and M. M., Noor (2019) The effect of thermal cyclic variation on the thermophysical property degradation of paraffin as a phase changing energy storage material. Applied Thermal Engineering, 149. pp. 22-33. ISSN 1359-4311. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and K. S., Lim (2019) Temperature-insensitive pressure transducer based on reflected broadened spectrum with enhanced sensitivity. Sensors and Actuators: A Physical, 288. pp. 61-66. ISSN 0924-4247. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and M. K. A., Zaini and K. S., Lim (2019) A Novel Temperature-Insensitive Hydrostatic Liquid-Level Sensor Using Chirped FBG. IEEE Sensors Journal, 19 (1). pp. 157-162. ISSN 1530-437X. (Published)

Vorathin, E. and Z. M., Hafizi and A. M., Aizzuddin and M. K. A., Zaini and K. S., Lim (2019) Temperature-independent chirped FBG pressure transducer with high sensitivity. Optics and Lasers in Engineering, 117. pp. 49-56. ISSN 0143-8166. (Published)

W. H., Azmi and S. N. M., Zainon and K. A., Hamid and R., Mamat (2019) A review on thermo-physical properties and heat transfer applications of single and hybrid metal oxide nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 5182-5211. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Ayub, M. A. and M. S. M., Sani and M. S., Mohd Zin (2019) Frequency based substructuring for structure with double bolted joints : a case study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6188-6199. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Z. M., Hafizi and Vorathin, E. and A. M., Aizzuddin and K. S., Lim (2019) High-Resolution Fibre Bragg Grating (FBG) Pressure Transducer for Low-Pressure Detection. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (2). pp. 6783-6795. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Zainal Ambri, Abdul Karim and Khan, Mohammed Yahaya and Abdul Rashid, Abdul Aziz and Hagos, F. Y. (2019) Attaining simultaneous reduction in nox and smoke by using water-in-biodiesel emulsion fuels for diesel engine. Platform: A Journal of Engineering, 3 (2). pp. 1-21. ISSN 2636-9877. (Published)

Zawawi, N. M. M. and Azmi, W. H. and Sharif, M. Z. and G., Najafi (2019) Experimental investigation on stability and thermo-physical properties of Al2O3-SiO2/PAG nanolubricants with different nanoparticle ratios. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1243-1255. ISSN 1388-6150 (print); 1588-2926 (online). (Published)

Book Chapter

Mohammad Hazim, Mohamad Hamdan and Siregar, J. P. and Bachtiar, Dandi and M. R. M., Rejab and Cionita, Tezara (2019) Mechanical properties of mengkuang leave fibre reinforced low density polyethylene composites. In: Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites: Development, Characterization and Applications. Woodhead Publishing Series, 6 (2018). Woodhead Publishing Series, Sawston‎, ‎Cambridge, pp. 181-196. (Unpublished)

Conference or Workshop Item

A. A., Hairuddin and H. M., Tobib and Z., Fariza and M. M., Noor (2019) The performance of a single-cylinder diesel engine fuelled with egusi based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012045). ISSN 1757-899X

A. F., Ahmad and A. R., Razali and Intan Suhana, Mohd Razelan and W. A. H. W., Hamizan (2019) Effect of waste polyethylene terephthalate (PET) on properties of road aggregate. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012056). ISSN 1757-8981 (Print), 1757-899X (Online)

A. I., Ramadhan and W. H., Azmi and R., Mamat and K. A., Hamid and Norsakinah, S. (2019) Investigation on stability of tri-hybrid nanofluids in water-ethylene glycol mixture. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012068). ISSN 1757-899X

A. M., Norkhizan and R., Mamat and A., Hamidi and Ahmad Fitri, Yusop (2019) Influence of TDSI/LUTAH fuel booster on the performance and emissions of diesel engine. In: AIP Conference Proceedings: , 25 - 26 July 2018 , Sri Manja Boutique Hotel, Kuantan, Pahang, Malaysia.. pp. 1-10., 2059 (020042).

A. S. H. M., Yasir and N. M. Z. N., Mohamed and A. Q., Basri (2019) Development of framework for armoured vehicle assembly line efficiency improvement by using simulation analysis: Part 1. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-13., 469 (012090). ISSN 1757-899X

Abbas, A. Wahab and N. F., Abdullah and Mohd Azri Hizami, Rasid (2019) Commutator fault detection of brushed dc motor using thermal assessment. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018; Universiti Malaysia Pahang , 31 October 2018 , UMP Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Abbas, Shabudin and Mohd Jamil Mohamed, Mokhtarudin and Payne, Stephen J. and Nik Abdullah, Nik Mohamed (2019) Investigation of the capillary effects toward brain tissue poroelastic properties using asymptotic expansion homogenization. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4..

Abdul wahid, Arman and Hagos, F. Y. and Abdul Adam, Abdullah and Rizalman, Mamat and Abd Rashid, A. Aziz (2019) Syngas production through steam and CO2 reforming of methane over ni-based catalyst - technical review. In: Energy Security And Chemical Engineering Congress (ESCHE) 2019 , 17 - 19 Julai 2019 , Parkroyal Resort, Penang. . (Unpublished)

Ahmad Fauzi, Fudzin and Ainul Akmar, Mokhtar and Mohd Amin, Abd Majid and Azizul Qayyum, Basri (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012004). ISSN 1757-899X

Ahmad Nasser, Mohd Rose and N. M. Z., Nik Mohamed and M. F. F., Ab Rashid and Hafizzudin, Mohd Noor and Alias, Mohd (2019) Improving productivity using value stream mapping (VSM) - a case study. In: 4th International Conference on Engineering Technology (ICET 2019) , 6-7 July 2019 , DITC, Kemaman, Terengganu. pp. 1-5.. (Unpublished)

Aishah, A. F. Q. A. and Ummu Kulthum, Jamaludin and Zainuriah, M. R. and Norhilda, A. K. (2019) Multiple linear regression model analysis in predicting fasting blood glucose level in healthy subjects. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Akram, A. and Hasanuddin, Iskandar and Nazaruddin, N. and Putra, R. and M. M., Noor (2019) Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat 'Jalo Kayoh'. In: IOP Conference Series: Materials Science and Engineering, The 8th Annual International Conference (AIC) 2018 on Science and Engineering , 12-14 September 2018 , Aceh, Indonesia. pp. 1-7., 523 (012076). ISSN 1757-8981 (Print), 1757-899X (Online)

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Anhar, Muhammad P. and Sutikno, S. and M. S. M., Sani (2019) Analysis of bulletproof vest made from fiber carbon composite and hollow glass microsphere (HGM) in absorbing energy due to projectile impact. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012001). ISSN 1757-8981 (Print), 1757-899X (Online)

At-Tasneem, Mohd Amin and A. N., Oumer and W. H., Azmi and K., Sulihaakma (2019) Mechanical process and size characterisation of rice husk, mango bark and mango leaves as a drag reduction additive. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress , 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-15., 736 (022112). ISSN 1757-899X

Azizuddin, Abd Aziz and S. N., Ashwindran (2019) Design of small thermal vacuum chamber for 125-U CubeSat satellite. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , UMP Pekan. pp. 1-7., 469 (012108).

Azizul Qayyum, Basri and N. M. Zuki, N. M. and K. A. S. H. M., Yasir and H. M., Fazi and Ahmad Fauzi, Fudzin (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012005). ISSN 1757-899X

Balkhaya, . and Anhar, M. P. and Suwarno, . and M. S. M., Sani (2019) Investigation of knife quality by using forging and flame hardening methods. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-6., 506 (012004). ISSN 1757-8981 (Print), 1757-899X (Online)

Chen, James Lau Tze and Azizuddin, Abd Aziz and A. N., Oumer and Mohd Hazwan, Yusof (2019) Energy efficiency analysis in office building through thermal modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (1). ISSN 1757-8981

Ching, Sheng Ooi and Ngui, Wai Keng and Kar, Hoou Hui and Lim, Meng Hee and Leong, Mohd Salman (2019) Review of underground storage tank condition monitoring techniques. In: Engineering Application of Artificial Intelligence Conference 2018 (EAAIC 2018) , 3-5 December 2018 , Sabah, Malaysia. pp. 1-13., 255 (02009). ISSN 2261-236X

D., Ramasamy and K., Kadirgama and W. H., Azmi and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Prediction modelling for Cellulose Nanocrystal (CNC) dispersed in ethylene glycol- water mixture. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-2.. (Unpublished)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) Characterization of Andrassy bentonite as grounding enhancement material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. p. 1.. (Unpublished)

Danial, Mohamed and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman and Mohd Ashraf, Mohamed Ismail (2019) On the effect of bio-corrosion of copper electrode in Andrassy bentonite as grounding material. In: The 11th National Technical Seminar on Unmanned System Technology (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang (UMP), Gambang Campus, Kuantan, Malaysia. pp. 1-2.. (Unpublished)

Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and Leman, A.M. and Khoerunnisa, F. and Sardjono, R. E. and Munawir, . and Maulana, M. I. and M. S. M., Sani (2019) Engine modelling of a single cylinder diesel engine fuelled by diesel-methanol blend. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-14., 506 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

F., Benedict and K., Kadirgama and D., Ramasamy and M. M., Noor and Mahendran, Samykano and M. M., Rahman and Zakri, Ghazalli and Sagmesh, B. (2019) Nanocellulose as heat transfer liquid in heat exchanger. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-9., 2059 (020044). ISBN 978-0-7354-1787-8

Farhana, K. and K., Kadirgama and M. M., Noor and M. M., Rahman and D., Ramasamy and Mahamude, A. S. F. (2019) CFD modelling of different properties of nanofluids in header and riser tube of flat plate solar collector. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012041). ISSN 1757-899X

Farhana, K. and Mahamude, A. S. F. and K., Kadirgama and M. M., Rahman and M. M., Noor and D., Ramasamy (2019) Internal energy analysis with nanofluids in header and riser tube of flat plate solar collector by CFD modelling. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012069). ISSN 1757-899X

Felayati, Frengki Mohamad and Semin, . and Cahyono, Beny and R. A., Bakar (2019) Numerical study of dual fuel engine using proportional natural gas split injection. In: AIP Conference Proceedings: Proceedings of the 4th International Conference on Mechanical Engineering (ICOME2019) , 28-29 August 2019 , Yogyakarta, Indonesia. pp. 1-5., 2187 (020018). ISSN 0094-243X ISBN 978-0-7354-1934-6

Hamisa, A. H. and Azmi, W. H. and N. N. M., Zawawi and Sharif, M. Z. and Shaiful, A. I. M. (2019) Comparative study of single and composite nanolubricants in automotive air-conditioning (AAC) system performance. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-11., 469 (012044). ISSN 1757-899X

Hamizatun, Mohd Fazi and N. M. Zuki, N. M. and Azizul Qayyum, Basri (2019) Risks assessment at automotive manufacturing company and ergonomic working condition. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012106). ISSN 1757-8981 (Print); 1757-899X (Online)

Hanafi, M. Yusop and M. F., Ghazali and Azmi, W. H. and Mohd Fadhlan, Mohd Yusof and M. A., Pi Remli and M. A. A., Rahim (2019) A Study of Ikaz and Normalized Hilbert transform for solving faulty in pipeline distribution system using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012083). ISSN 1757-899X

Hanafi, M. Yusop and M. F., Ghazali and W. H., Azmi and Mohd Fadhlan, Mohd Yusof and M. A., PiRemli and M. Z., Noordin (2019) Application of Ikaz and direct quadrature for solving leakage in pipeline distribution by using transmission line modelling. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469. ISSN 1757-8981 (Print); 1757-899X (Online)

Haslizam, Abdullah and Mohd Adnin, Hamidi and Saiful Anwar, Che Ghani (2019) Process improvement of multiple agarwood oil extractions using low-cost multi-channel temperature data logger. In: International Conference On Advances In Mechanical Engineering And Nanotechnology (ICAMEN 2019) , 6 - 11 March 2019 , Manipal University Jaipur India. pp. 1-6.. (Unpublished)

Hasyuzariza, M. Tobib and A. Aziz, Hairuddin and Nuraini, A. A. and M. M., Noor and J., Zulkiple and Mossa, Muntasser A. A. (2019) An Experimental Investigation On The Combustion And Performance Of An HCCI-DI Engine. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020010). ISBN 978-0-7354-1787-8

Hasyuzariza, M. Tobib and Rostam, Hamzah and A. A. Mossa, Muntasser and A. Aziz, Hairuddin and M. M., Noor (2019) The performance of an HCCI-DI engine fuelled with palm oil- based biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012079). ISSN 1757-899X

Hazman, Abu Hassan and R., Mamat and Hagos, F. Y. and Gholamhassan, Najafi (2019) Experiment of oxygenated fuel on diesel engine: Properties, performance and emission. In: International Symposium on Science, Technology and Engineering (ISSTE 2019) , 18-20 October 2019 , Melaka, Malaysia. pp. 1-14.. (Unpublished)

Hazrulzurina, Suhaimi and Abdullah, Adam and Mrwan, Anes G. and Zuhaira, Abdullah and Mohd. Fahmi, Othman and Mohd. Kamal, Kamarulzaman and Hagos, F. Y. (2019) A comparative analysis on emissions of some next generation long-chain alcohol/diesel blends in a direct-injection diesel engine. In: AIP Conference Proceedings: 3rd International Conference On Automotive Innovation Green Energy Vehicle (AIGEV2018) , 25-26 July 2018 , Kuantan, Malaysia. pp. 1-13., 2059 (020053). ISBN 978-0-7354-1787-8

Herzwan, H. M. and Azri, Alias and R., Mamat (2019) Turbocharging small size engine to increase engine output: an assessment of turbocharger study field. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012089). ISSN 1757-8981

I., Naiman and K., Kadirgama and D., Ramasamy (2019) Experimental and one dimensional investigation on nanocellulose and aluminium oxide hybrid nanofluid as a new coolant for radiator. In: 1st International Postgraduate Conference On Mechanical Engineering (IPCME 2018) , 31 Oktober 2018 , Library UMP Pekan. pp. 1-8., 469 (1). ISSN 1757-8981

Izzah, A. R. N. and Salwani, Mohd Salleh and Tan, S. W. and Mas Ayu, Hassan and R., Daud (2019) Effect of specimen geometry, quenching and trigger mechanism on crushing performance of single hat column. In: 1st IOP Conference Series: International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012091). ISSN 1757-899X

J. M., Zikri and M. S. M., Sani and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester with the additional of butanol. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588

James Lau, Tze Chen and A. N., Oumer and Azizuddin, Abd Aziz and M. A., At-Tasneem (2019) Preparation and characterisation of mango bark and mango leaf nanoparticles for lubrication. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-5.. (Unpublished)

K., Chopra and Pratik, Kumar Pathak and Mahendran, Samykano and Tyagi, V. V. and Pandey, A. K. (2019) Recent advancements in design of flat plate solar collectors. In: The International Scientific Forum (ISF2019) , 16-17 December 2019 , Melaka, Malaysia. pp. 1-8.. (Unpublished)

K., Kadirgama and D., Ramasamy and M. M., Rahman and Mahendran, Samykano and W. S., W. Harun (2019) Analysis of thermal Conductivity for Cellulose Nanocrystal (CNC) based nanofluid. In: 27th Annual International Conference on Composites or Nano Engineering , 13-21 Julai 2019 , University of Granada, Spain. pp. 1-4.. (Unpublished)

K., Mohanesen and D., Ramasamy and K., Kadirgama and M. M., Noor and M. M., Rahman (2019) Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012075). ISSN 1757-899X

K. H., Khalib and Nur Hairunnisa, Kamarudin and M. F. F., Ab Rashid (2019) Evaluation of rank-based crossovers to optimize real-life assembly line balancing with resource constraint. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (12014). ISSN 1757-899X

Kaur, Jesbains and Nurfatihah, Jamil and Syed, Shahabuddin and Pandey, A. K. and Saidur, R. and Hagos, F. Y. and Singh, Baljit (2019) The Effects of Graphene on Microstructural and Thermal Properties of Calcium Chloride Hexahydrate PCM. In: IEEE International Conference and Utility Exhibition on Green Energy for Sustainable Development (ICUE 2019) , 24-26 October 2018 , Phuket, Thailand. pp. 1-6.. ISBN 978-9-7482-5799-0

Kavin, J. and Mohd Rashidi, Maarof and Ahmad, A. H. (2019) Investigation of nickel aluminium bronze castings properties by degassing agent technique. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012037). ISSN 1757-899X

M. A., Anwar and A. K., Zainal and Kurniawan, Tedi and Asmara, Y. P. and W. S., Wan Harun and Priyadonko, G. and Saptaji, Kushendarsyah (2019) Electrochemical exfoliation of pencil graphite core by salt electrolyte. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. p. 1., 469 (1). ISSN 1757-8981

M. A. H., Aizzat and Muhamad Zuhairi, Sulaiman and Enoki, K. and Okawa, T. (2019) Heat transfer coefficient of nucleate boiling in low concentration level of single and hybrid Al2O3-SiO2 water-based nanofluids. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012109). ISSN 1757-899X

M. F., Othman and Abdul Adam, Abdullah and K., Kamal and Syuhaida, Asri and Zulkifli, Azmi and R., Mamat (2019) Improvement of fuel properties for palm oil methyl ester (POME) biodiesel blends using organic germanium as additives. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012121). ISSN 1757-8981 (Print), 1757-899X (Online)

M. N. M., Husnain and M. R. M., Akramin and Z. L., Chuan (2019) Surface crack growth prediction under fatigue load using the S-version Finite Element Model (S-FEM). In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012011). ISSN 1757-899X

M. N. M., Merzuki and M. R. M., Rejab and M. S. M., Sani and Zhang, Bo and Quanjin, Ma and Wan, Rafizi (2019) Investigation of modal analysis on glass fiber laminate aluminium reinforced polymer: An experimental study. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012065). ISSN 1757-899X

M. Nazrul, H. M. Bahrudin and M. Mukhtar, N. A. and Hagos, F. Y. and R., Mamat and Abdul Adam, Abdullah and Zainal Ambri, Abdul Karim (2019) Comparison between tri-fuel (diesel-ethanol-biodiesel) emulsion with and without surfactant. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-12., 2059 (020056). ISBN 978-0-7354-1787-8

M. S., Najiha and M. M., Rahman and K., Kadirgama and D., Ramasamy (2019) An experimental study to evaluate the flank wear interaction with process parameters during machining of aluminium alloy under minimum quantity lubrication with TiO2 nanofluid. In: International Meeting On Collaboration Technologies 2019 (IMCT 2019) , 14 - 18 Julai 2019 , Yogyakarta, Indonesia. pp. 1-6.. (Unpublished)

M. S. M., Fouzi and M. S. M., Sani (2019) Numerical study to optimize exhaust hanger location based on finite element modelling and model updating. In: International Conference On Computational Science And Information Management , 21 - 23 March 2019 , Lombok Indonesia. pp. 1-13.. (Unpublished)

M. S. M., Sani and Azmi, W. H. and N. F. D., Razak and Zhang, B. (2019) The effect of change in flowrate on power spectral density (PSD) of automotive radiator system for flow-induced vibration monitoring. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , Universiti Malaysia Pahang (UMP)Pekan, Pahang. pp. 1-9., 469 (012101). ISSN 1757-899X

M. S. M., Sani and K. M., Jelani and M. H. M., Razip and N. A., Nazri and Yasar, M. (2019) Dynamics investigation on motorcycle chassis based on Finite Element (FE) modelling and updating. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 Oktober 2018 , UNIVERSITI MALAYSIA PAHANG, PEKAN. pp. 1-10., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

M. S. M., Sani and M. H. N., Izham and M. N., Abdul Rani and M. A., Yunus (2019) Damage assessment on frame structure with bolted joints based on experimental modal analysis. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-9., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. S. M., Fouzi and Yusrizal, Muchlis (2019) Finite Element Modelling and updating of welded joint for dynamic study of exhaust structure. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-10., 469 (1). ISSN 17578981

M. Z., Farid and Azmi, W. H. and Zawawi, N. M. M. and R., Mamat and A. I. M., Shaiful (2019) Energy and exergy analysis of compact automotive air conditioning (AAC) system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012042). ISSN 1757-899X

Miminorazeansuhaila, Loman and Z. M., Hafizi (2019) Leak detection in a pipe using fibre bragg grating sensor. In: International Postgraduate Conference On Mechanical Engineering (IPCME) , 31 Oktober 2018 , Universiti Malaysia Pahang (UMP) Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and R. A., Bakar (2019) Single Hole Direct Injector Simulation Validation and Parametric Sensitivity Study. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-7..

Mohamad Syazwan, Mohd Zin and M. N., Abdul Rani and M. A., Yunus and W. I. I., Wan Iskandar Mirza and M. S. M., Sani (2019) Experimental modal analysis procedure for a laser spot welded hat-plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfor , 7 March 2019 , Selangor, Malaysia. pp. 1-9., 1262 (012015). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and Mohd Mawardi, Saari and Tsukada, Keiji and Nurul A’in, Nadzri (2019) An MFL probe using shiftable magnetization angle for front and back side crack evaluation. In: 15th IEEE Colloquium on Signal Processing and its Applications (CSPA 2019) , 8-9 March 2019 , Penang, Malaysia. pp. 1-5.. ISBN 978-153867563-2

Mohd Azrul Hisham, Mohd Adib and Mohammad Asyrul, Abd Rashid and Nur Hazreen, Mohd Hasni (2019) Development of smart infant-wrap (InfaWrap) device for neonates. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 186-187.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Mohd Hanafi, Abdul Rahim and Nur Hazreen, Mohd Hasni (2019) Development of bilirubin jaundice (BiliDice) device for neonates. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 188-189.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhamad Hazim, Khalili and Nur Hazreen, Mohd Hasni (2019) Development of Brady-Tachy heart automotive monitoring (BT-Heartomotive) device to prevent motor-vehicle accident. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 118-119.. ISBN 978-967-2145-65-3 (online)

Mohd Azrul Hisham, Mohd Adib and Muhammad Irfan, Abdul Jalal and Nur Hazreen, Mohd Hasni (2019) Improvement of the BT-heartomotive device for avert car accident using MY Brady Tachy Heart mobile application. In: 6th International Conference on Bioinformatics Research and Applications (ICBRA 2019) , 19-21 December 2019 , Seoul National University, Seoul, South Korea. pp. 1-5.. (Unpublished)

Mohd Azrul Hisham, Mohd Adib and Muhammad Shahminan, Lukman and Nur Hazreen, Mohd Hasni (2019) Development of an integrated vaccine system (IVS) for vaccination healthcare database. In: MERD'19: Proceedings of Mechanical Engineering Research Day 2019 , 31 July 2019 , Kampus Teknologi UTeM, Melaka, Malaysia. pp. 155-156.. ISBN 978-967-2145-65-3 (online)

Mohd Fahmi, Othman and Abdul Adam, Abdullah and Syuhaida, Asri and Zulkifli, Azmi and Mohd Hafizil, Mat Yasin and Zuhaira, Abdullah and R., Mamat (2019) A comparative study on performance characteristics of diesel engine fuelled by biodiesel blends with and without Ge-132 additive. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012122). ISSN 1757-899X

Mohd Fahmi, Othman and Nurul Syuhaida, Mohd Asri and Abdul Adam, Abdullah and Mohd Kamal, Kamaruzzaman (2019) Performance and emission characteristics of single cylinder diesel engine fueled with organic germanium. In: 3rd International Conference On The Sustainable Energy And Environment Development (SEED2019) , 15 - 24 Oct. 2019 , Krakow, Poland. pp. 1-24.. (Unpublished)

Mohd Farid, Zainudin and R. A., Bakar and K., Kadirgama (2019) Effects of phase angle setting, displacement, and eccentricity ratio based on determination of rhombic-drive primary geometrical parameters in beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012047). ISSN 1757-8981 (Print), 1757-899X (Online)

Mohd Farid, Zainudin and R. M., Faiz and R. A., Bakar and K., Kadirgama (2019) Thermodynamic performance prediction of rhombic-drive beta-configuration Stirling engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012048). ISSN 1757-8981 (Print); 1757-899X (Online)

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin (2019) Effect of BHA and BHT antioxidant additives on engine performance and emission of a CI engine fueled with a palm oil methyl ester-diesel fuel blend. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020051). ISBN 978-0-7354-1787-8

Mohd Hafiz, Ali and Mohd Kamal, Kamaruzzaman and Mohd Hafizil, Mat Yasin and Abdul Adam, Abdullah (2019) Cyclic pressure variations in a single-cylinder diesel engine fueled with biodiesel and antioxidant blends. In: 5th International Conference On Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Pahang, Malaysia. pp. 1-2.. (Unpublished)

Mohd Jamil Mohamed, Mokhtarudin and Aina Najwa, Nadzri and Stephen, Payne (2019) Finite element poroelastic modelling of brain oedema formation after ischaemic stroke reperfusion. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4..

Mohd Jamil Mohamed, Mokhtarudin and Shabudin, Abbas and Payne, Stephen J. (2019) Effects of Brain Tissue Mechanical and Fluid Transport Properties during Ischaemic Brain Oedema: A Poroelastic Finite Element Analysis. In: IEEE-EMBS Conference on Biomedical Engineering And Sciences (IECBES 2018) , 3-6 December 2018 , Borneo Convention Centre Kuching, Sarawak, Malaysia. pp. 1-6.. ISBN 978-1-5386-2471-5

Mohd Noor Firdaus, Haron and F. R. M., Romlay (2019) Parametric study of laser engraving process of AISI 304 Stainless Steel by utilizing fiber laser system. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012124).

Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd Syafiq, Sharip and Norazlianie, Sazali and Haziqatulhanis, Ibrahim and Ahmad Shahir, Jamaludin (2019) A Review on Effectiveness of Numerous Technologies by Utilizing Hydrogen. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems , 21-22 August 2019 , Putrajaya, Malaysia. pp. 423-428.. ISBN 978-981-15-0950-6

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Asyraf, Shahrom and Mohamad Heerwan, Peeie and Mohamad Izhar, Ishak and Muhammad Zulhilmi, Ismail and Muhammad Solehuddin, Ibrahim (2019) Comparison of braking performance between mechanical and dynamic braking for Electric Powered Wheelchair. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012104). ISSN 1757-8991 (Print), 1757-899X (Online)

Muhamad Izdhar, Zaki and Saptaji, Kushendarsyah and Ramdan, R. D. and Kurniawan, Tedi (2019) Fabrication of micro dimples pattern using ball end mill. In: IOP Conference Series: Materials Science and Engineering, International Conference on Design and Application of Engineering Materials (IC-DAEM) in conjunction with Seminar Nasional Metalurgi dan Material XI (SENAMM) , 6-7 September 2018 , Bandung, Indonesia. pp. 1-8., 547 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhammad Fadhli, Suhaimi and Mohd Hazwan, Yusof (2019) The effect of tube length and cold exit diameter on the cold flow temperature of vortex tube using high temperature working gas. In: IOP Conference Series: 1st International Postgraduate Conference on Mechanical EngineeringInternational Postgraduate Conference on Mechanical Engineering 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012040). ISSN 1757-899X

Muhammad Nazmi Hadi, Roslan and Nor Atiqah, Zolpakar and Normah, Mohd Ghazali and Fatimah Al-Zahrah, Mohd Saat (2019) Application of 3D printing technology in thermoacoustic stack fabrication. In: The 11th International Meeting on Advances In Thermofluids (IMAT2019) , 7-8 November 2019 , Chikushi Campus, Kyushu University, Japan. pp. 1-6.. (Unpublished)

N. A., Mutalib and I., Ismail and S. M., Soffie and S. N., Aqida (2019) Magnetorheological finishing on metal surface: a review. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012092). ISSN 1757-899X

N. A. Z., Abdullah and M. S. M., Sani and M. S., Salwani (2019) Comparison of crash behaviour of initial and updated finite element model of car crash box in crashworthiness analysis. In: 1st International colloquium on noise, vibration and comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7.. (Unpublished)

N. F. D., Razak and M. S. M., Sani and W. H., Azmi and Zhang, B. (2019) Noise source identification of automotive radiator by using sound intensity mapping method. In: 1st International Colloquium On Noise, Vibration And Comfort (CNVC 2019) , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-12., 1262 (012008). ISSN 17426588

N. K., Romli and M. R. M., Rejab and Xiaoxia, Jiang and Mohamad Nazirul Mubin, Merzuki (2019) Numerical modelling response of laser welded sandwich panel under three-point bending test. In: IOP Conference Series: Materials Science and Engineering: 1st International Postgraduate Conference on Mechanical Engineering (IPCME 2018) , 31 October 2018 , UMP Pekan, Pahang. pp. 1-7., 469 (012060). ISSN 1757-899X

N. M., Maliessa and S. R. A., Idris (2019) Effect of different amount of Silicon Carbide on SAC Solder-Cu Joint performance by using Microwave hybrid heating method. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012110). ISSN 1757-8981

N. N. M., Zawawi and Azmi, W. H. and Sharif, M. Z. and Shaiful, A. I. M. (2019) Composite nanolubricants in automotive air conditioning system: An investigation on its performance. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012078). ISSN 1757-899X

Narayanan, T. and Jeefferie, Abd Razak and Intan Sharhida, Othman and Noraiham, Mohamad and Mohd Edeerozey, Abd Manaf and Mazlin Aida, Mahamood and Hazman, Hasib and Mohd Muzafar, Ismail and Ramli, Junid (2019) Tensile, flexural and fracture morphological properties of recycled polypropylene (rPP) filled dried banana leaves fibre (DBLF) composites: Effects of DBLF loadings. In: Advances in Material Sciences and Engineering , 14-15 November 2018 , Melaka, Malaysia. pp. 609-618.. ISSN 2195-4356 ISBN 978-981-13-8297-0

Nasrul Hadi, Johari and Menichini, Claudia and Hamady, Mohamad and Xu, Xiao Y. (2019) Effects of stent design on LDL accumulation at the carotid artery bifurcation. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4.. (Unpublished)

Norazlianie, Sazali and W. N., W. Salleh and A. F., Ismail and Ahmad Shahir, Jamaludin and M. N., M. Razali and Y., Iwamoto (2019) A comprehensive review and perception of carbon molecular sieve membranes for hydrogen production and purification. In: Energy Security And Chemical Engineering Congress (ESCHE 2019) , 17-19 July 2019 , Parkroyal Resort, Penang, Malaysia. pp. 1-2.. (Unpublished)

Norhafana, M. and M. M., Noor and A. Aziz, Hairuddin and Hagos, F. Y. and S. I., Ayob and K., Kadirgama and D., Ramasamy (2019) An experimental study of the performance and emission characteristics of a compression ignition (CI) engine fueled with palm oil based biodiesel. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020036). ISBN 978-0-7354-1787-8

Norhafana, M. and M. M., Noor and Pshtiwan, M. Sharif and Hagos, F. Y. and Hairuddin, A. A. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Alenezi, R. and Hoang, A. T. (2019) A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012035). ISSN 1757-899X

Norul Amierah, Nor Zamani and Iqbal, AKM Asif and Nuruzzaman, D. M. (2019) Fabrication and characterization of Al2O3 nanoparticle reinforced aluminium matrix composite via powder metallurgy. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 190-195., 29 (1). ISSN 2214-7853

Nurul Fatimah, Abdullah and Abbas, A. Wahab and Mohd Azri Hizami, Rasid (2019) Study of temperature rise in small brushed DC motor components under different speed. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-8., 469 (012098). ISSN 1757-8981 (Print); 1757-899X (Online)

Nuruzzaman, D. M. and Kusaseh, N. and Iqbal, AKM Asif and Khan, Maksudur R. and Azmir, Azhari and Zamzuri, Hamedon and Chan, Shin Yi (2019) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings; 4th Advanced Materials Conference 2018, AMC 2018 , 27 - 28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29. ISSN 2214-7853

Pi Remli, Mohd Aminuddin and Ghazali, M. F. and Azmi, W. H. and Mohd Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Leak localization using empirical mode decomposition and teager-kaiser energy operator analysis based on pressure transient signal: experimental study. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-10., 469 (1). ISSN 1757-8981

Pi Remli, Muhammad Aminuddin and Ghazali, M. F. and Azmi, W. H. and M. Yusof, M. F. and M. Yusop, Hanafi and Azmi, M. L. (2019) Implementation of I-kaz with Teager-Kaiser energy operator in solving leakage problem using synthetic signal. In: IOP Conference Series: Materials Science and Engineering; 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 Oktober 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-8., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and A., As’arry and K. A. M., Rezali and M. M., Noor and Norhafana, M. and A. A. Mossa, Muntasser and S. M., Shareef (2019) International regulation of vehicle emissions control rules and its influence on academic engine development experimental study and vehicle manufacturing. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-14., 469 (012070). ISSN 1757-899X

Pshtiwan, M. Sharif and A. Aziz, Hairuddin and A., As’arry and K. A. M., Rezali and M. M., Noor and Norhafana, M. and S. M., Shareef (2019) Nano gas bubbles dissolve in gasoline fuel and its influence on engine combustion performance. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012062). ISSN 1757-899X

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Zhang, Bo and Merzuki, M.N.M. and Kumar, Nallapaneni Manoj (2019) Wireless technology applied in 3-axis filament winding machine control system using MIT app inventor. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012030). ISSN 1757-8981 (Print), 1757-899X (Online)

R., Mamat (2019) Renewable Fuel for Transportation Engines. In: Proceedings of International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019) , 8-9 March 2019 , Manipal University Jaipur. p. 17..

R. M., Yaacob and M. A. H., Hashim and M. S. M., Sani (2019) Finite element modeling and updating of the composite plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012013). ISSN 1742-6588 (print); 1742-6596 (online)

Radhwan, H. and Nasir, S. M. and Mohd Rashidi, Maarof and Kamarudin, K. and Abdellah, Abdellah el-hadj (2019) Optimization parameters to reduce the warpage defect of plastic injection molding process for a thin-shell part using design of experiment. In: IOP Conference Series: Materials Science and Engineering, Joint Conference on Green Engineering Technology & Applied Computing 2019 , 4-5 February 2019 , Bangkok, Thailand. pp. 1-7., 551 (012027). ISSN 1757-8981 (Print), 1757-899X (Online)

Rahman, Hammad A. and Khairi, N. D. A. and M. S. M., Sani (2019) Finite element model updating of dissimilar plate with rivet joint. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort , 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (012035). ISSN 1742-6588 (print); 1742-6596 (online)

S., Kassim and Hasliza, A. Rahim and P. J., Soh and Mohamedfareq, Abdulmalek and M., Jusoh and M. H., Jamaluddin and Nur Syahirah, Sabli and M. N., Yassin and T., Sabapathy and F. H., Wee and M. N., Osman and Noormariani, Ismail (2019) Flexible Co-Planar Waveguide (CPW)-fed y-shaped patch UWB antenna for off-body communication. In: Journal of Physics: Conference Series, The 1st International Conference on Education and Technology (ICETECH) , 8 August 2019 , Madiun, Indonesia. pp. 1-7., 1464 (012058). ISSN 1742-6596

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. and I. M., Yusri (2019) Evaluation of properties on performance and emission to turbocharged SI engine using fusel oil blend with gasoline. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012113). ISSN 1757-899X

S. N., Ashwindran and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2019) Comparative power extraction analysis of novel nature inspired vertical axis wind turbines. In: UTP-UMP-VIT Symposium on Energy System 2019 , 1-2 October 2019 , UMP Pekan. p. 1.. (Unpublished)

Sakinah, Hisham and K., Kadirgama and D., Ramasamy and M., Samykano and W. S., Wan Harun and R., Saidur (2019) Statistical approach for prediction of thermal properties of CNC and CNC-CuO nanolubricant using Response Surface Methodology (RSM). In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-14., 788 (012016). ISSN 1757-899X

Santhi, U. and W. K., Ngui and Mahendran, Samykano and K., Sudhakar and K., Kadirgama and A. G. N., Sofiah (2019) Cobalt nanowires: advancing into future nanomaterial. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020006). ISBN 978-0-7354-1787-8

Shan, Kho Y. and Mahmood, Anwar and Islam, Sumaiya and Debnath, Sujan and Mas Ayu, Hassan (2019) Electrical behaviour of nanosilver doped gallium flexible conductor for biomedical application. In: IOP Conference Series: Materials Science and Engineering, 11th Curtin University Technology, Science and Engineering (CUTSE) , 26-28 November 2018 , Curtin University Malaysia, Miri, Sarawak. pp. 1-6., 495 (012084). ISSN 1757-8981 (Print), 1757-899X (Online)

Siregar, J. P. and Jamiluddin, Jaafar and Teuku, Rihayat and Suryani and Salmyah and Helmi and Sariadi and Fitria and Satriananda and Alfian, Putra and Zahra, Fona and Juanda and Raudah and Mawaddah and Nurhanifa and Shafira, Riskina and Wildan, Syahputra (2019) Wound dressing based on banana peels waste and chitosan by strengthening lignin as wound healing medicine. In: 1st South Aceh International Conference on Engineering and Technology, SAICOET 2018 , 8-9 Dec 2018 , Politeknik Aceh Selatan Tapaktuan, Aceh Selatan. pp. 1-10., 506 (1). ISSN 17578981

Siregar, J. P. and Jamiluddin, Jaafar and Teuku, Rihayat and Suryani and Satriananda and M., Yunus and Sariadi and Fitria and Shafira, Riskina and Zuhra, Amalia and Wildan, Syahputra and Nurhanifa and Safari and Nurul fitriah and Mardani (2019) Synthesis and characterization of North Aceh CEC bentonite determination with methylene blue method and increased D-Spacing after addition of surfactants CTAB-SDS. In: 1st South Aceh International Conference on Engineering and Technology, SAICOET 2018 , 8-9 Dec 2018 , Politeknik Aceh Selatan Tapaktuan, Aceh Selatan. pp. 1-7., 506 (1). ISSN 17578981

Siti Sabariah, M. and Syafiqah Nabilah, A. S. and R. A., Bakar and Junaidi, Z. Z. and Mustafar, M. T. (2019) Analysis and simulation of combustion and emission on small engine. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Subramaniam, Shathiswara Rao and Mahendran, Samykano and Selvamani, Sathish Kumar and W. K., Ngui and K., Kadirgama and Sudhakar, K. and M. S., Idris (2019) Preliminary Investigations of Polylactic Acid (PLA) Properties. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018 , 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-8., 2059 (020038). ISBN 978-0-7354-1787-8

Syuhaimi, Kassim and Hasliza, A. Rahim and Malek, Fareq and Nur Syahirah, Sabli and M. E., Mat Salleh (2019) UWB nanocellulose coconut coir fibre inspired antenna for 5G applications. In: 2019 3rd International Conference on Communications, Signal Processing, and their Applications, ICCSPA 2019 , 19-21 March 2019 , Sharjah, United Arab Emirates. pp. 1-5. (8713653). ISBN 9781728120850

Tan, C. Y. and Ngui, Wai Keng and Leong, Mohd Salman and Lim, M. H. (2019) Blade fault diagnosis using empirical mode decomposition based feature extraction method. In: Engineering Applications Of Artificial Intelligence Conference (EAAIC 2018) , 3 - 5 Disember 2018 , Sabah, Malaysia. p. 1., 255. ISSN 2261-236X

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani and M. S., Mohd Zin (2019) The prediction of the dynamic behaviour of a structure using model updating and frequency based substructuring. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET) , 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-7., 506 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

W. N., Maawa and R., Mamat and I. M., Yusri and Febrina, R. (2019) Effect of emulsified palm oil biodiesel-diesel blends to the combustion characteristics of compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012080). ISSN 1757-899X

W. N., Maawa and R., Mamat and I. M., Yusri and Yasar, M. (2019) Experimental Investigation on the Engine Performance and Exhaust Emissions of Emulsified Palm Biodiesel Blends on a Diesel Engine. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012114). ISSN 1757-899X

Wei, Ting Tan and Mohd Jamil Mohamed, Mokhtarudin and Yih, Miin Liew and Nasrul Hadi, Johari and Einly, Lim (2019) Biomechanical analysis of distal stent graft induced new entry (SINE) formation in aortic dissection patient. In: 6th International Conference on Computational and Mathematical Biomedical Engineering (CMBE 2019) , 10-12 June 2019 , Japan. pp. 1-4.. (Unpublished)

Z. S., Zahari and Dayangku Noorfazidah, Awang Sh'ri and M. A.H., Abu Hassan and W. S., Wan Harun (2019) Effect of ECAP die angle to the microstructure and mechanical properties of bulk nanostructured Al-6061. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , Universiti Malaysia Pahang, Pekan, Pahang. pp. 1-8., 469 (1). ISSN 17578981

Zafirah, R. C. and Ummu Kulthum, Jamaludin and Khalijah, Khalid and Luqman, H. M. and Aishah, A. F. Q. A. and Azrina, R. and Basri, M. N. M. and Fatanah, S. and Normy N., A. R. (2019) Study on the blood glucose management with controlled goal feed in Malaysian critically ill patients. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018) , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012097). ISSN 1757-8981 (Print), 1757-899X (Online)

Zuhaira, Abdullah and Abdul Adam, Abdullah and Hazrulzurina, Suhaimi and Mohd, Akmal (2019) Impact of diesel-biodiesel-hexanol tri-fuel blends on the combustion and exhaust emissions characteristics of a diesel engine. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (1). ISSN 1757-8981

Zulkifli, Ahmad@Manap and Ummu Kulthum, Jamaludin and Aishah, A. F. Q. A. and Najeb, J. M. (2019) Development of wearable electromyogram (EMG) device for upper extremity in aerobic exercise. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018 , 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012085). ISSN 1757-899X

Thesis

Amirruddin, Abdul Kadir (2019) Tribological performance analysis of nanocellulose-AL2O3-engine oil. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Dzulaika Nubaillah, Noor (2019) Techno-economic analysis in optimisation of hybrid air-conditioning system combining chilled water storage and solar water heater. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Haque, Muhammad Ehteshamul (2019) A CFD model development and performance investigation of frost free refrigerator with nanoparticles suspended in the lubricant. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Jamiluddin, Jaafar (2019) Characterization of short pineapple leaf fiber reinforced tapioca biopolymer composites. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siregar, Januar Parlaungan).

Keeran, Anamalai (2019) Development and analysis of Ethylene Glycol/Nanocellulose based Nanofluid Coolant for machining SUS 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khamisah, Abdul Hamid (2019) Forced convection heat transfer performance of TiO2-SiO2 nanofluids with wire coil inserts. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Lingenthiran, Samylingam (2019) Modelling and verification of TiO2/ZnO/EGW nano coolant on the tin milling tool performance. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, A/l Kadirgama).

Mohd Hafizu, Zakaria (2019) Progressive tool wear in machining biomedical alloy using uncoated and titanium diboride coated tungsten carbide tools. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nazrotul Afina, Nazri (2019) Dynamic damage assessment of resistance spot welding for dissimilar plates by using model updating approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hairunnisa, Kamarudin (2019) Modelling and optimisation of assembly line balancing problem with resource constraint. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Fadzil Faisae, Ab. Rashid).

Selvamani, Sathish Kumar (2019) Mechanical behaviour of acrylonitrile butadiene styrene (ABS) specimen by fused deposition modelling (FDM). Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mahendran, A/L Samykano).

Shathiswara Rao, Subramaniam (2019) Influence of 3D printing parameters on mechanical behaviour of polylactic acid (PLA) specimen utilizing FDM technique. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Aishah, Safi (2019) Theoretical analysis on the wind power and pumped hydropower storage integrated flood mitigation system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

UMPSA News

Saiful Anwar, Che Ghani (2019) Jalin hubungan baik UMP dan MUJ anjur persidangan ICAMEN. UMP News . (Unpublished)