Items where Division is "Faculty of Engineering Technology" and Year is 2018

A

A. R., Zul Rasyied and N. N., Mazlee and M. R., Salim and Hadi, Manap and S., Nurulain (2018) The potential development of oxygen optical fibre gas sensor for automotive industry. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-3). pp. 1-4. ISSN 2180-1843. (Published)

A.F., Mohd Sadullah and Nur Fahriza, M. A. and A., Zulkiple (2018) Mode choice for the journey to work during morning peak hour in Klang, Malaysia. In: Proceedings of Mechanical Engineering Research Day 2018 , 03 May 2018 , Kampus Teknologi UTeM, Melaka. pp. 187-188.. ISBN 9789672145202 (Published)

Ahmed, Mahmood and Waheb Abdul Jabbar, Shaif Abdullah and Wasan Kadhim, Saad and Hadi, Manap (2018) Optimal nano dimensional channel of GaAs-FinFET transistor. In: 2018 IEEE 16th Student Conference On Research And Development (Scored), Bangi, Malaysia (26-28 Nov 2018) , 26 - 28 Nov 2018 , Bangi Resort, Bangi, Selangor, Malaysia. pp. 1-5.. ISBN 978-153869175-5 (Published)

Aida Khairani, Ariffin (2018) Exposure assessment of indoor fine particulate matter 2.5 (PM2.5) in bound to heavy metals among shop in urban area of Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Alam, Muneer and Jain, Neelesh Kumar and Pathak, Sunil (2018) Investigations on copper nano-particles synthesis by pulsed electrochemical dissolution (PECD) process. In: 4th International Conference Of Chemical Engineering And Industrial Biotechnology (ICCEIB 2018) , 1-2 Aug 2018 , Seri Pacific Hotel, Kuala Lumpur. pp. 569-571.. (Published)

Ali, A. and Abdalla, Ahmed N. and Ruhaizad, Ishak (2018) EFFECT of DG Optimizing on overload Transmission line Stability. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) , 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-11., 225 (03023). ISSN 2261-236X (Published)

Aliyah, Jamaludin and C. K. M., Faizal (2018) Green synthesis of silver nanoparticles using sago (metroxylon sagu) via autoclaving method. IIUM Engineering Journal, 19 (1). pp. 178-184. ISSN 1511-788X. (Published)

Aliyah, Jamaludin and Che Ku Mohammad Faizal, Che Ku Yahya (2018) Green synthesis of silver nanoparticles using Sago (Metroxylon Sagu) via auto claving method. IIUM Engineering Journal, 19 (1). pp. 178-184. ISSN 1511-788X. (Published)

Alsibai, Mohammed Hayyan and Nurul Nadia, Nor Hamran and Abdul Nasir, Abd Ghafar and Abdul Adam, Abdullah (2018) A monitoring system for EPW safe use. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-2). pp. 131-135. ISSN 2180-1843. (Published)

Alsibai, Mohammed Hayyan and Sharif, Mhd Saeed and Salma, Yaakub and Nurul Nadia, Nor Hamran (2018) An innovative EPW design using add-on features to meet Malaysian requirements. In: 7th IEEE International Conference on Control System, Computing and Engineering (ICCSCE) , 24-26 November 2017 , Penang, Malaysia. pp. 1-6.. (Published)

Andri, Kusbiantoro and Rahimah, Embong and Azrina, Abd Aziz (2018) Strength and microstructural properties of mortar containing soluble silica from sugarcane bagasse ash. In: International Conference On Advanced Materials Research , 19-25 Januari 2018 , Kyushu University, Ito Campus. pp. 269-274., 765. ISSN 10139826 ISBN 978-303571230-8 (Published)

Atalla, Yousif and Hashim, Yasir and Abdul Nasir, Abd Ghafar (2018) Temperature sensitivity based on channel length of FinFET transistor. Journal of Nanoscience and Technology, 4 (1). pp. 338-341. ISSN 2455-0191. (Published)

Azrina, Abd Aziz and Shaliza, Ibrahim (2018) Preparation of Activated Carbon/N-doped Titania Composite for Synergistic Adsorption-photocatalytic Oxidation of Batik Dye. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Global Sustainability and Chemical Engineering (ICGSCE) , 15-16 February 2017 , Putrajaya, Malaysia. pp. 1-5., 358 (012014). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Azzura Izzaty, Abu Bakar (2018) Design and fabrication of solar powered membrane distillation system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

B

Baridula, Ravinder Reddy (2018) Effect of deposition of nanoparticles during joining of dissimilar metals by friction stir welding. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Benseghir, Hocine and Mohd Fadzil, Mohd Idris and Abdullah, Ibrahim and Kabir, M. Nomani (2018) Modeling and Simulation of Emergency Evacuation from Industry Buildings under Toxic Cloud Release. In: 2nd Borneo International Conference on Applied Mathematics and Engineering (BICAME) , 10-11 December 2018 , Aston Hotel, Balikpapan, Indonesia. . (In Press / Online First) (In Press / Online First)

Benseghir, Hocine and Mohd Fadzil, Mohd Idris and M. Nomani, Kabir and Abdullah, Ibrahim (2018) Survey on Pedestrian-Dynamics Models for Evacuation Process Based on Game Theory. In: IEEE International Seminar on Application for Technology of Information and Communication , 21-22 September 2018 , Semarang, Indonesia. pp. 539-544.. ISBN 978-1-5386-7486-4 (Published)

Brendapal Kaur Thind, Jagdiesh Singh (2018) Health risk assessment of metals bound to the fine particulate matter (PM2.5) at Jalan Mahkota, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

C

Chaher, Zid and Benseghir, Hocine and Abdullah, Ibrahim and Kabir, M. Nomani (2018) A Fuzzy-based Risk Model for Construction Project Management. In: IEEE Conference on Systems, Process and Control (ICSPC 2018) , 14-15 December 2018 , Melaka, Malaysia. pp. 129-134.. ISBN 978-1-5386-6327-1 (Published)

Chew, Mann Yee (2018) Incident investigation tracking system based on process safety management. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ching, L.H. and Mahmood, Syed and Raihana Z., Edros and Rajaletchumy, Veloo Kutty (2018) Development and characterization of a theranostic micelles system using TPGS with docetaxel and coumarin-6: a dual polymeric nanocarrier system. International Journal of Engineering Technology and Sciences, 5 (1). pp. 1-10. ISSN 2289-697X (Print); ISSN: 2462-1269 (Online). (Published)

D

Dwibedi, Swagat and Jain, Neelesh Kumar and Pathak, Sunil (2018) Investigations on joining of stainless steel tailored blanks by μ-PTA process. Materials and Manufacturing Processes, 33 (16). pp. 1851-1863. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

E

Enidran, Loganathan (2018) Development of propolis powder for encapsulation via freeze drying method : purification and freeze drying process of extracted propolis. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Ezrin Hani, Sukadarin and Junaidah, Zakaria and Qian, F. S and Nur Syazwani, Mohd Nawi and Baba, M. Deros (2018) Creating a culture of prevention in occupational safety and health practice: perceived body discomfort in two sitting positions. Malaysian Journal of Public Health Medicine, 18 (SI(2)). pp. 47-51. ISSN 1675-0306. (Published)

Ezrin Hani, Sukadarin and Nurud Suria, Suhaimi and Hanida, Abdul Aziz and H., Osman and Mohd Nazri, Noordin and I., Shafiee (2018) Analysis of road accident fatality in malaysia: body part injury. In: 2nd Conference Of Asean Road Safety (CARS 2018) , 4 - 6 Disember 2018 , Summit Hotel, Subang. pp. 1-8.. (Unpublished) (Unpublished)

F

Farag, Mohannad and Norsinnira, Zainul Azlan and Alsibai, Mohammad Hayyan (2018) Development of anthropomorphic robotic hand driven by Pneumatic Artificial Muscles for robotic applications. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-10., 342 (1). ISSN 1757-8981 (Published)

Fatin Nur Haziqah, Abd Razak (2018) Adverse effect of shrimp pond farming effluent to the water quality of Pekan river. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Fatinah, Ab Rahman and E. N., Engku Mat Nasir and Syarifah, Abd Rahim and Raihana Z., Edros and Nornizar, Anuar (2018) Effect of Solvents and Crystallization Methods on the Formation of Carbamazepine-Saccharin Co-Crystal. International Journal of Engineering & Technology, 7 (4.18). pp. 90-94. ISSN 2227-524X. (Published)

Fatinah, Ab Rahman and Engku Nadia, Engku Mat Nasir and Syarifah, Abd Rahim and Raihana Z., Edros and Nornizar, Anuar (2018) Solubility and thermodynamic function of carbamazepine-saccharin (CBZ-SAC) co-crystal in ethanolic solution. In: 13th International Workshop of The Crystal Growth of Organic Material , 27 - 30 Ogos 2018 , Korea University, Seoul, Korea. pp. 1-11.. (Unpublished) (Unpublished)

Firdaus, Basrawi and Al-Anati, A. I. M. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Theoretical analysis on the micro gas turbine integrated solar farm for power output stabilization. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (04012). ISSN 2261-236X (Published)

Firdaus, Basrawi and Leon, Y. C. and Ibrahim, Thamir K. and Mohd Hazwan, Yusof and A. A., Razak and Shaharin Anwar, Sulaiman and Yamada, Takanobu (2018) Experimental analysis on the effect of area of surface cooling for a water-cooled photovoltaic. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018 , 18-19 September 2018 , Tamil Nadu, India. 1 -6., 225 (01011). ISSN 2261-236X (Published)

G

Gan, Zun Jia (2018) Statistical analysis of factors affecting monoclonal antibody production by using principal component analysis : molecular markers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Goh, Jee Ren (2018) Stability analysis and improvement evaluation on residual soil slope with reinforcement load : building cracked & slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

H

Hanida, Abdul Aziz and Ezrin Hani, Sukadarin and Nurud Suria, Suhaimi and Hairunnisa, Osman and Mimi Nabila, Mohd Nordin and Ikram, Shafie (2018) Applying Analytical Hierarchy Process to Evaluate Adult Occupant Protection on Body Region in ASEAN NCAP Offset Frontal Test Domain. Journal of the Society of Automotive Engineers Malaysia, 2 (3). pp. 267-274. ISSN 2550-2239. (Published)

Hanida, Abdul Aziz and Natasya, Azmi (2018) Compliance tracking system for training element of OSHA process safety management. In: IOP Conference Series: Materials Science and Engineering, International Conference on Process Engineering and Advanced Materials (ICPEAM2018) , 13-14 August 2018 , Kuala Lumpur, Malaysia. pp. 1-8., 458 (012049). ISSN 1757-8981 (Published)

Hashim, Yasir (2018) Optimization of Resistance Load in 4T-Static Random-Access Memory Cell Based on Silicon Nanowire Transistor. Journal of Nanoscience and Nanotechnology, 18 (2). pp. 1199-1201. ISSN 1533-4880 (Print); 1533-4899 (Online). (Published)

Hazirah, Roslan (2018) Design and development of electrical system on hydrokinetic turbines for home power. Faculty of Engineering Technology, Universiti Malaysia Pahang.

I

Intansarah Sahira, Mohd Noor (2018) Electroporation of lignocellulosic biomass. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Islam, M. Amirul and Yousuf, Abu and Karim, Ahasanul and Pirozzi, Domenico and Khan, Maksudur R. and Zularisam, A. W. (2018) Bioremediation of Palm Oil Mill Effluent and Lipid Production by Lipomyces Starkeyi: A Combined Approach. Journal of Cleaner Production, 172. pp. 1779-1787. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Izzati, Isahak (2018) Physiological and psychological effects of heat exposure among steel industry workers. Faculty of Engineering Technology, Universiti Malaysia Pahang.

J

Jabbar, Waheb A. and Alsibai, Mohammad Hayyan and Nur Syaira, S. Amran and Samiah, K. Mahayadin (2018) Design and Implementation of IoT-Based Automation System for Smart Home. In: IEEE International Symposium on Networks, Computers and Communications (ISNCC 2018) , 19-21 June 2018 , Rome, Italy. pp. 1-6.. ISBN 978-1-5386-3779-1 (Published)

Jabbar, Waheb A. and Mahamod, Ismail and Rosdiadee, Nordin and Roshahliza, M. Ramli (2018) EMA-MPR: Energy and Mobility-Aware Multi-Point Relay Selection Mechanism for Multipath OLSRv2. In: IEEE 13th Malaysia International Conference on Communications (MICC 2017) , 29-30 November 2017 , Johor Bahru. pp. 1-6.. ISBN 978-1-5386-3132-4 (Published)

Jabbar, Waheb A. and Saad, Wasan Kadhim and Hashim, Yasir and Nurshuhadah, Zaharudin and Mohd Firdaus, Zainal Abidin (2018) Arduino-based buck boost converter for PV solar system. In: IEEE Student Conference on Research and Development (SCOReD 2019) , 26-28 November 2018 , Selangor, Malaysia. pp. 1-6.. ISBN 978-1-5386-9175-5 (Published)

Jabbar, Waheb A. and Saad, Wasan Kadhim and Mahamod, Ismail (2018) MEQSA-OLSRv2: A Multicriteria-Based Hybrid Multipath Protocol for Energy-Efficient and QoS-Aware Data Routing in MANET-WSN Convergence Scenarios of IoT. IEEE Access, 6. pp. 76546-76572. ISSN 2169-3536. (Published)

Jain, N. K. and Pathak, Sunil and Alam, Muneer (2018) Synthesis of Copper Nanoparticles by Pulsed Electrochemical Dissolution Process. Industrial and Engineering Chemistry Research. pp. 1-7. ISSN 0888-5885. (In Press / Online First) (In Press / Online First)

Jarial, Rini and Thakur, Sveta and Mimi Sakinah, A. M. and Zularisam, A. W. and Sharad, Amit and Kanwar, S. S. and Singh, Lakhveer (2018) Potent Anticancer, Antioxidant and Antibacterial Activities of Isolated Flavonoids from Asplenium. Journal of King Saud University - Science, 30 (2). pp. 185-192. ISSN 1018-3647. (Published)

Judy, Wong (2018) Treated polystyrene microcarriers vero cells using ultraviolet/ozone (UVO) expansion of serum-free medium adapted. Faculty of Engineering Technology, Universiti Malaysia Pahang.

K

Kah, Hon Leong and Azrina, Abd Aziz and Lan, Ching Sim and Saravanan, Pichiah and Jang, Min and Bahnemann, Detlef (2018) Mechanistic Insights Into Plasmonic Photocatalysts in Utilizing Visible Light. Beilstein Journal of Nanotechnology, 9. pp. 628-648. ISSN 2190-4286. (Published)

Karim, Ahasanul and Yousuf, Abu and M. Amirul, Islam and H. Naif, Yasir and C. K. M., Faizal and Alam, Md. Zahangir and Pirozzi, Domenico (2018) Microbial lipid extraction from Lipomyces starkeyi using irreversible electroporation. Biotechnology Progress, 34 (4). pp. 838-845. ISSN 1520-6033. (Published)

Karim, Kaykobad Md Rezaul and Huei, Ruey Ong and Hamidah, Abdullah and Yousuf, Abu and Cheng, C. K. and Khan, Maksudur R. (2018) Electrochemical study of copper ferrite as a catalyst for CO2 photoelectrochemical reduction. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (2). pp. 236-244. ISSN 1978-2993. (Published)

Khairunisa, Muthusamy and N. A., Zamri and Andri, Kusbiantoro and N. H. A. S., Lim and M. A., Mohd Ariffin (2018) Effect of palm oil fuel ash on compressive strength of palm oil boiler stone lightweight aggregate concrete. In: International Conference on Innovative Technology, Engineering and Sciences (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang, Pahang, Malaysia. pp. 1-5., 342 (1). ISSN 17578981 (Published)

Khan, Arshad Ali and Abdulbaqi, Ibrahim M. and Assi, Reem Abou and Vikneswaran, Murugaiyah and Yusrida, Darwis (2018) Lyophilized hybrid nanostructured lipid carriers to enhance the cellular uptake of verapamil: statistical optimization and in vitro evaluation. Nanoscale Research Letters, 13 (323). pp. 1-16. ISSN 1556-276X. (Published)

Khatun, Fatema and Azrina, Abd Aziz and A. K. M., Kafi and Sim, Lan Ching (2018) Synthesis and Characterization of TiO2 Nanotube Using Electrochemical Anodization Method. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 132-139. ISSN 2289-697X. (Published)

Khudhur, Ahmed Mahmood (2018) Optimization and improvement of hodgkin-huxley model under the influence of ion channel noise in neurons. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Koay, B. K. and Mohd Fakhrurrazi, Ishak and M. S. I., Zaini and M. F., Zolkepli (2018) Investigation and monitoring of groundwater level: building crack near to IIUM Kuantan. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 51-56. ISSN 2289-697X. (Published)

Krishnan, Santhana and Mohd Fadhil, Md Din and Shazwin, Mat Taib and Yong, Ee Ling and Eeyzah, Aminuddin and Chelliapan, Shreeshivasan and Mishra, Puranjan and Rana, Supriyanka and Mohd Nasrullah, Zulkifli and Mimi Sakinah, A. M. and Zularisam, A. W. and Singh, Lakhveer (2018) Utilization of micro‒algal biomass residues (MABRS) for bio‒hythane production‒ a perspective. Journal of Applied Biotechnology & Bioengineering, 5 (3). pp. 166-169. ISSN 2572-8466. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. and Faisal, Alamri (2018) Microbial fuel cell is emerging as a versatile technology: a review on its possible applications, challenges and strategies to improve the performances. International Journal of Energy Research, 42 (2). pp. 369-394. ISSN 0363-907X. (Published)

Kumar, Ravinder and Singh, Lakhveer and Zularisam, A. W. and Mahapatra, Durga Madhab and Liu, Hong (2018) Novel mesoporous MnCo2O4 nanorods as oxygen reduction catalyst at neutral pH in microbial fuel cells. Bioresource Technology, 254. pp. 1-6. ISSN 0960-8524. (Published)

Kunji, Ahmad Kamal and Kusbiantoro, Andri and Zulkiple, Adnan and Ramli, Harzah M (2018) Roadside safety recovery zone corridor widths derived from live field experiments and comparison to past accidents records. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 105-117. ISSN 2289-697X. (Published)

Kunji, Ahmad Kamal and Kusbiantoro, Andri and Zulkiple, Adnan and Ramli, Harzah M. (2018) Characteristic of safety recovery zone and roadside hazard cases in malaysia road: A review. International Journal of Engineering Technology And Sciences (IJETS), 5 (3). pp. 90-104. ISSN 2289-697X. (Published)

L

Lay, Hui Lian (2018) A study on road safety awareness and practices among secondary school’s students. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Lee, Jing Yue (2018) Rainfall induced residual soil slope instability : building cracked and slope failure. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Leong, Weng Kai (2018) Noise exposure management system based on Factories and Machinery (noise exposure) Regulations 1989. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Li, Woon Koay and Naif, Yasir Hashim (2018) Design of a fully wireless indoor smart energy saving and monitoring system. In: 2nd Asia International Multidisciplinary Conference (AIMC 2018) , 11-13 May 2018 , Universiti Teknologi Malaysia, Johor Bharu, Malaysia. pp. 1-9.. (Unpublished) (Unpublished)

M

M. F., Zolkepli and Mohd Fakhrurrazi, Ishak and M. S.I., Zaini (2018) Analysis of slope stability on tropical residual soil. International Journal of civil Engineering and Technology (IJCIET), 9 (2). pp. 402-416. ISSN 0976-6308(Print); 0976-6316(Online). (Published)

Mahmood, Ahmed and Hashim, Yasir and Hadi, Manap (2018) Nano-dimensional properties of Si-FinFET transistor based on ION/IOFF ratio and subthreshold swing (SS). Journal of Nanoscience and Technology, 4 (4). pp. 431-434. ISSN 2455-0191. (Published)

Mahmood, Ahmed and Jabbar, Waheb A. and Saad, Wasan Kadhim and Hashim, Yasir and Hadi, Manap (2018) Optimal Nano-Dimensional Channel of GaAs-FinFET Transistor. In: IEEE Student Conference on Research and Development (SCOReD 2019) , 26-28 November 2018 , Selangor, Malaysia. pp. 1-5.. ISBN 978-1-5386-9175-5 (Published)

Mahmood, Syed and Mandal, Uttam K. and Chatterjee, Bappaditya (2018) Transdermal delivery of raloxifene HCl via ethosomal system: Formulation, advanced characterizations and pharmacokinetic evaluation. International Journal of Pharmaceutics, 542 (1-2). pp. 36-46. ISSN 0378-5173. (Published)

Mansor, M. A. and Ismail, A. R. and Hamran, N. N. N. and Sarifudin, M. S. (2018) Knowledge management to boost productivity in manufacturing. Journal of Fundamental and Applied Sciences, 10 (3S). pp. 19-31. ISSN 1112-9867. (Published)

Marliza, Ismail (2018) Community preparedness towards major accident events in Gebeng Industrial Area, Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mishra, Puranjan (2018) Biohydrogen production from palm oil mill effluent via sequential dark-photo fermentation. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab Wahid, Zularisam).

Mishra, Puranjan and Singh, Lakhveer and Zularisam, A. W. and Krishnan, Santhana and Rana, Supriyanka and M. Amirul, Islam and Mimi Sakinah, A. M. and Ameen, Fuad and A., Syed (2018) Photohydrogen production from dark-fermented palm oil mill effluent (DPOME) and statistical optimization: Renewable substrate for hydrogen. Journal of Cleaner Production, 199. pp. 11-17. ISSN 0959-6526. (Published)

Mohamad Haniki, Nik Mohamed and Azizur, Rahman and Shazia, Jamshed and Mahmood, Syed (2018) Effectiveness and safety of electronic cigarettes among sole and dual user vapers in Kuantan and Pekan, Malaysia: a six-month observational study. BMC Public Health, 18 (1). pp. 1-10. ISSN 1471-2458. (Published)

Mohamad Ikhwan, Mohd Rashid (2018) The investigation of heat stress among workers in pineapple plantation. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Mohamad Salleh, Nur Fazrina and Ezrin Hani, Sukadarin (2018) Job Hazard Analyses (JHA) for Ergonomics Risk Factors in Malaysian Pineapple Plantation. Journal of Occupational Safety and Health, 15 (1). pp. 17-25. ISSN 1765-5456. (Published)

Mohammad, Balsam T. and Al-Shannag, Mohammad and Alnaief, Mohammad and Singh, Lakhveer and Singsaas, Eric and Alkasrawi, Malek (2018) Production of multiple biofuels from whole camelina material: a renewable energy crop. BioResources, 13 (3). pp. 4870-4883. ISSN 1930-2126 (Print); 1930-2126 (Online). (Published)

Mohammad Affendy, Omardin and Diyana, Kamarudin and Liu, Yao (2018) The knowledge of tacit by supervisory technical on the maintenance team. In: International Conference on Business Intelligence, Industrial Engineering & Management (ICBIIEM) , 11-12 December 2018 , Universiti Malaysia Pahang, Gambang, Pahang. p. 1.. (Unpublished) (Unpublished)

Mohammad Affendy, Omardin and Liu, Yao and Diyana, Kamarudin (2018) Practices of sustainable architectural knowledge for hospital building maintenance. In: Proceeding: International Research Conference on Social Sciences (IRCSS 2018) , 29-30 January 2018 , Langkawi, Malaysia. pp. 320-325.. ISBN 978-967-14841-5-9 (Published)

Mohd Fakhrurrazi, Ishak and M. S. I., Zaini (2018) Physical Analysis Work for Slope Stability at Shah Alam, Selangor. In: Journal of Physics: Conference Series, International Seminar on Mathematics and Physics in Sciences and Technology (ISMAP 2017) , 28-29 October 2017 , Batu Pahat, Johor. pp. 1-9., 995 (012064). ISSN 1742-6596 (Published)

Mohd Rashidi, Salim and Mohd Haniff, Ibrahim and Asrul Izam, Azmi and Muhammad Yusof, Mohd Noor and Ahmad Sharmi, Abdullah and Nor Hafizah, Ngajikin and Hadi, Manap and Dooly, Gerard and Lewis, Elfed (2018) Highly responsive CO2 detection by an improved & compact gas sensor using mid-IR spectroscopy. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-8). pp. 1-7. ISSN 2289-8131. (Published)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Kristanti, Risky Ayu and Yousuf, Abu (2018) Gasification of lignocellulosic biomass to produce syngas in a 50 kW downdraft reactor. Biomass and Bioenergy, 119. pp. 335-345. ISSN 0961-9534. (Published)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Risky Ayu, Kristanti and Yousuf, Abu (2018) Co-gasification of empty fruit bunch in a downdraft reactor: A pilot scale approach. Bioresource Technology Reports, 1. pp. 39-49. ISSN 2589-014X. (Published)

Monir, Minhaj Uddin and Azrina, Abd Aziz and Risky Ayu, Kristanti and Yousuf, Abu (2018) Syngas Production from Co-gasification of Forest Residue and Charcoal in a Pilot Scale Downdraft Reactor. Waste and Biomass Valorization. pp. 1-17. ISSN 1877-2641. (In Press / Online First) (In Press / Online First)

Muhamad Aqil, Azri and Mohd Shamil, Shaari and Ahmad Kamal Ariffin, Mohd Ihsan and Shahrum, Abdullah (2018) Microstructure, Mechanical Properties and Fatigue Behavior of AlSi10Mg: an Additive Manufacturing Material. International Journal of Engineering & Technology, 3 (3.17). pp. 186-190. ISSN 2227-524X. (Published)

Muhamad Arifpin, Mansor and M. N., Ab Rahman and S. S., Sulaiman and N. A. M. A., Zainal (2018) Dynamic Evaluation of Single Minutes of Exchange Die (SMED) Using Network Data Envelopment Analysis (DEA). In: 4th International Conference On Business And Engineering Research (ICBER 2018) , 16-18th November 2018 , Osaka, Japan. pp. 1-5.. (Published)

Muhammad Alif Hafizi, Jasmani (2018) The development of energy efficient vehicle using Natural Gas Technology (NGV). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Farhan, Zolkepli (2018) Slope stabilization influenced by unsaturated soil. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Haziq, Jamil and Farah Amalina, Ishak and Abdul Syukor, Abd Razak and Siti Zafirah, Zainuddin and Siddique, Md. Nurul Islam (2018) Man-Made Lake of Taman Pertanian, Kuantan: The Valuation of Water Quality and Nutrient Removal by Using Hydrilla Verticillata Sp. and Myriophyllum Aquaticum Sp. as Submerged Plant Species. In: International Conference on Chemical Sciences and Engineering: Advance and New Materials (ICCSE 2018) , 7-8 November 2018 , Ramada Plaza, Melaka. pp. 1-10.. (Published)

Muhammad Naufal Afif, Mohd Hanis (2018) Recovery of rebaudioside A and stevioside from stevia reaudiana plant using solid liquid extraction. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad Nor Aiman, Yusof (2018) Indoor air quality management system based on industrial code of practice on indoor air quality 2010. Faculty of Engineering Technology, Universiti Malaysia Pahang.

N

N., Azmi and Hanida, Abdul Aziz (2018) Compliance tracking system for training element of OSHA process safety management. In: International Conference of Process Engineering and Advanced Materials , 13 - 14 Aug. 2018 , Kuala Lumpur Convention Centre. pp. 1-8.. (Unpublished) (Unpublished)

Nabihah, Abdul Malik (2018) Building occupants’ knowledge on fire safety evacuation plan at shopping mall : evacuation pathway. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nabilah, Mamat and Kusbiantoro, Andri and Norbaizurah, Rahman (2018) Hydrochloric acid based pre-treatment on paper mill sludge ash as an alternative source material for geopolymer. Materials Today: Proceedings, 5 (10 Part 2). pp. 21825-21831. ISSN 2214-7853. (Published)

Nasrullah, M. and Singh, Lakhveer and Krishnan, Santhana and Mimi Sakinah, A. M. and Zularisam, A. W. (2018) Electrode Design for Electrochemical Cell To Treat Palm Oil Mill Effluent by Electrocoagulation Process. Environmental Technology & Innovation, 9. pp. 323-341. ISSN 2352-1864. (Published)

Natasha, Azmi (2018) Training management system based on process safety management. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Natasha, Baharudin and Hadi, Manap (2018) Color detection system using an open path reflection method. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 36-45.. ISBN 978-967-22260-5-5 (Published)

Nik Nor Aziati, Abd Aziz (2018) Optimization of succinic acid production from immobilized escherichia coli. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Nurul Fathihah, Nik Azman (2018) Analysis of fatigue among public bus driver in Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noor Liyana, Mohd Zuki (2018) Mechanical design and fabrication of Three-Wheel Electrical Vehicle (TWEV). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Noor Zaihah, Jamal and M. H., Sulaiman and Omar, Aliman (2018) Impact of overcurrent protection coordination on the location of the distributed generation sources. In: 10th National Technical Seminar on Underwater System Technology (NUSYS) 2018 , 26-27 September 2018 , Universiti Malaysia Pahang, Pekan. pp. 1-8.. (Published)

Noor Zaihah, Jamal and Mohd Herwan, Sulaiman and Omar, Aliman and Zuriani, Mustaffa (2018) Optimal Overcurrent Relays Coordination using an Improved Grey Wolf Optimizer. International Journal of Advanced Computer Science and Applications (IJACSA), 9 (11). pp. 117-125. ISSN 2156-5570(Online). (Published)

Nor Azreen, Zabir (2018) Environmental factors affecting commuting accident in public university Kuantan, Pahang. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nor Hafiza, Zahid (2018) Development of haze monitoring system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nor Mazlee, Norazmi and Zul Rasyied, Abdul Rasat and Mazuina, Mohamad and Hadi, Manap (2018) UV detection on artificial uric acid using UV-Vis spectrometer. Journal of Lasers, Optics & Photonics, 5 (1). pp. 1-4. ISSN 2469-410X. (Published)

Nor Wahidatul Azura, Zainon Najib (2018) Characterisations the bio-active compounds of bio-oil extracted from red meranti sawdust by fast pyrolysis. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ab Wahid, Zularisam).

Norbaizurah, Rahman (2018) The combined effect of dipotassium hydrogen phosphate and paper mill sludge ash towards formation of efflorescence and properties of fly ash geopolymer mortar. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norbaizurah, Rahman and Andri, Kusbiantoro and Nabilah, Mamat and Khairunisa, Muthusamy and Mohd Mustafa Al Bakri, Abdullah (2018) Roles of calcium in geopolymer containing paper mill sludge ash. Materials Science Forum, 917. pp. 311-315. ISSN 0255-5476. (Published)

Norbaizurah, Rahman and Kusbiantoro, Andri and Khairunisa, Muthusamy and Mohd Mustafa Al Bakri, Abdullah (2018) Degree of Reaction and Alkali-Leaching of Geopolymer Containing Ca-Rich Source Material and Dipotassium Hydrogen Phosphate. Key Engineering Materials, 765. pp. 275-279. ISSN 1013-9826 (print); 1662-9795 (online). (Published)

Norfarhana Azliya, Ahmad Razali (2018) A study on knowledge, attitude and practice on disaster preparedness among hospital staff at Ipoh, Perak. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Norlisa, Harruddin and Syed Mohd Saufi, Tuan Chik and C. K. M., Faizal and Abdul Wahab, Mohammad (2018) Effect of VIPS fabrication parameters on the removal of acetic acid by supported liquid membrane using a PES-graphene membrane support. RSC Advances, 8 (45). pp. 25396-25408. ISSN 2046-2069. (Published)

Norul Hasanah, Ahmad Marzuki (2018) Studies of stability in rolling sphere robot. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Afiqah, Mohd Hasmadi (2018) Super nozzle cleaner for ceiling fan blade. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Aisyah, Rozak (2018) A study of impact of body mass index (BMI) toward fitness among firefighters in Kuantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Aliah Aini, Jamaluddin (2018) Catchment delineation and parameterization using gis technique for Kuantan River. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Athirah, Sabarudin (2018) Extraction of betacyanin from Bougainvillea glabra bract and the adsorption onto fibres. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Dini, M. J. and Noormazlinah, Ahmad and Norhanimah, Hamidi and Nurul Aini, Mohd Azman (2018) Enzymatic production of fructooligosaccharides from phytoenzymes of ananas comosus waste by using response surface methodology: one factor. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 3. pp. 37-50. ISSN 0126-8139. (Published)

Nur Fahriza, Mohd Ali and Ahmad Farhan, Mohd Sadullah and A., Zulkiple (2018) A preliminary survey on mode choice and its effect in users' satisfaction on their journey to the railway station. In: IOP Conference Series: Materials Science and Engineering: International Conference On Innovative Technology, Engineering And Sciences (ICITES 2018) , 01-02 April 2018 , UMP Library, Pekan. pp. 1-12., 342 (1). ISSN 1757-899X (Published)

Nur Fazrina, Mohamad Salleh and Ezrin Hani, Sukadarin (2018) Analyses of working postures among malaysia pineapple plantation workers using ovako working posture analysis system. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 139-146.. ISBN 978-967-22260-5-5 (Published)

Nur Fazrina, Mohamad Salleh and Ezrin Hani, Sukadarin (2018) Defining Human Factor and Ergonomic and its related issues in Malaysia Pineapple Plantations. In: MATEC Web of Conferences: Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017) , 6-7 December 2017 , Penang, Malaysia. pp. 1-8., 150 (05047). ISSN 2261-236X (Published)

Nur Nadzirah, Ahmad Ridzuan (2018) Non-destructive testing using infrared image for the measurement of compressive strength of IBS concrete panel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nur Wasilah, Abdul Wahid (2018) Recovery of rebaudioside A from stevia rebaudiana (bertoni) extracts using two different purification techniques. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nuraini Atikah, Mohammad (2018) Dry fermentation to produce biogas. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurhidayah, Azmy and Ahmad Zairi, Mohd Zain (2018) Engineering technology curriculum development: bridging the gap between academia-industry through undergraduate final year project. Internation Journal of Academic Research in Progressive Education & Development, 7 (4). pp. 459-467. ISSN 2226-6348. (Published)

Nurhusna, Samsudin and Yumi Zuhanis Has Yun, Hashim and Mohd Azmir, Arifin and Hamzah, Mohd. Salleh (2018) Surface modification of microcporous of polycaprolactone (PCL) microcarrier to improve microcarrier biocompatibility. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1642-1647. ISSN 2088-5334. (Published)

Nurshuhadah, Zaharudin (2018) The development system and circuit design of buck boost converter for PV solar system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nursyahira, Omar (2018) Super nozzle cleaner for ceiling fan blade. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Ain, Jumri (2018) Effect of different extraction conditions on the production of anthraquinone. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izaaz, Azmi (2018) Development of photocatalyst for CO2 conversion to hydrocarbon fuel. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nurul Izzureen, Muhamad Zuraidi (2018) Emergency response and planning management system for process industries. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Nuruzzakiyah, Mohd Ishanuddin and Ezrin Hani, Sukadarin and Hanida, Abdul Aziz (2018) A review of psychosocial and psychological and its related issues in the occupational settings. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 147-157.. ISBN 978-967-22260-5-5 (Published)

P

Parvathi Nandini, Balah Krishnan (2018) Development of propolis powder for encapsulation via freeze drying method : extraction of propolis, components identification and an antioxidant activity study. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Pathak, Sunil and Jain, Neelesh Kumar (2018) Performance of pulsed-electrochemical honing and pulsed-electrochemical finishing in improving quality of bevel gears. Manufacturing Review, 5 (14). pp. 1-9. ISSN 2265-4224. (Published)

Ping, Feng Lim and Kah, Hon Leong and Lan, Ching Sim and Azrina, Abd Aziz and Saravanan, Pichiah (2018) Amalgamation of N-graphene quantum dots with nanocubic like TiO2: an insight study of sunlight sensitive photocatalysis. Environmental Science and Pollution Research. pp. 1-10. ISSN 1614-7499. (Submitted) (Submitted)

Prasanth, I. S. N. V. R. and Ravishankar, D. V. and Hussain, M. Manzoor and Badiganti, Chandra Mouli and Sharma, Vinod Kumar and Pathak, Sunil (2018) Investigations on performance characteristics of GFRP composites in milling. The International Journal of Advanced Manufacturing Technology, 99 (5-8). pp. 1351-1360. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Puranjan, Mishra and Thakur, Sveta and Mahapatra, Durga Madhab and Zularisam, A. W. and Liu, Hong and Singh, Lakhveer (2018) Impacts of Nano-Metal Oxides on Hydrogen Production in Anaerobic Digestion of Palm Oil Mill Effluent - A Novel Approach. International Journal of Hydrogen Energy, 43 (5). pp. 2666-2676. ISSN 0360-3199. (Published)

R

R. M. Q. R., Jaapar and Muhamad Arifpin, Mansor (2018) Convolutional neural network model in machine learning methods and computer vision for image recognition: a review. In: Proceedings of the Fourth International Conference on Science, Engineering and Environment (SEE-2018) , 12-14 November 2018 , Nagoya, Japan. pp. 1-6.. ISBN 978-4-909106018 (Published)

Rini, Jarial and Thakur, Sveta and Mimi Sakinah, A. M. and Zularisam, A. W. and Sharad, Amit and Kanwar, S. S. and Singh, Lakhveer (2018) Potent anticancer, antioxidant and antibacterial activities of isolated flavonoids from Asplenium nidus. Journal of King Saud University - Science, 30 (2). pp. 185-192. ISSN 1018-3647. (Published)

Risky Ayu, Kristanti and Hadibarata, Tony and Al Farraj, Dunia A. and Elshikh, Mohamed Soliman and Alkufeidy, Roua M. (2018) Biodegradation mechanism of phenanthrene by halophilic hortaea sp. B15. Water, Air, & Soil Pollution, 229 (10). pp. 1-8. ISSN 0049-6979(Print); 1573-2932(Online). (Published)

Roshahliza, M. Ramli and Nurul Aqilah, Herman and Muhammad Ridzuan, Mazlan and Azlin Suraya, Nazaruddin and Muhammad Arshad, Tuah and Abdul Naqib Eizzaz, Abd Samad and Kamal, Othman and Yanti Marliana, Esmail (2018) Development of robotic rover with controller & vision system. In: 3rd Engineering Technology International Conference (ETIC2018) , 15-16 August 2018 , Melaka International Trade Centre (MITC), Melaka. pp. 1-6.. (Published)

Roshahliza, M. Ramli and Salina, Abdul Samad and Noor, Ali O. Abid (2018) Objective and Subjective Evaluations of Adaptive Noise Cancellation Systems with Selectable Algorithms for Speech Intelligibility. Bulletin of Electrical Engineering and Informatics, 7 (4). pp. 570-579. ISSN 2302-9285. (Published)

S

S. N., Abdul Rahman and Mimi Sakinah, A. M. (2018) Influenced factors in the delignification process of red meranti wood sawdust. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 3. pp. 26-36. ISSN 0126-8139. (Published)

S. N., Abdul Rahman and Mimi Sakinah, A. M. (2018) Operability analysis on upscaled stirred tank for cellulose recovery from red meranti wood sawdust. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 78-85.. ISBN 978-967-22260-5-5 (Published)

Salma, Yaakub and Alsibai, Mohammad Hayyan (2018) A Review on Autonomous Driving Systems. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 1-16. ISSN 2289-697X. (Published)

Sharif, Mhd Saeed and Alsibai, Mohammed Hayyan (2018) Medical data analysis based on Nao Robot: an automated approach towards robotic real-time interaction with human body. In: 7th IEEE International Conference on Control System, Computing and Engineering (ICCSCE) , 24-26 November 2017 , Penang, Malaysia. pp. 1-6.. (Published)

Sharif, Mhd Saeed and Alsibai, Mohammed Hayyan and Kushnerenko, Elena (2018) Evaluating bad and good EEG segments based on extracted features: towards an automated understanding of infant behavior and attention. In: 7th IEEE International Conference on Control System, Computing and Engineering (ICCSCE) , 24-26 November 2017 , Penang, Malaysia. pp. 1-6.. (Published)

Sharifah Fathiyah, Sy Mohamad and Farhan, Mohd Said and Mimi Sakinah, A. M. and Shahril, Mohamad (2018) Factors influencing forward extraction of jacalin from aqueous phase into anionic reverse micelles. In: 4th International Conference Of Chemical Engineering And Industrial Biotechnology (ICCEIB 2018) , 1-2 August 2018 , Seri Pacific Hotel, Kuala Lumpur. pp. 51-52.. (Published)

Shinde, Dinesh and Mistry, K. N. and Jhavar, Suyog and Pathak, Sunil (2018) A Review on Non-Asbestos Friction Materials: Material Composition and Manufacturing. Advanced Materials Research, 1150. pp. 22-42. ISSN 1022-6680 (print), 1662-8985 (online). (Published)

Shuhada, Abdul Muttalib and Raihana Z., Edros and Nor Azah, Mohd Ali and Kutty, Rajaletchumy V. (2018) A review: the extraction of active compound from Cymbopogon sp. and its potential for medicinal applications. International Journal of Engineering Technology and Sciences, 5 (1). pp. 1-17. ISSN 2289-697X (Print); ISSN: 2462-1269 (Online). (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2018) Achievements and perspectives of anaerobic co-digestion: A review. Journal of Cleaner Production, 194. pp. 359-371. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2018) Application of natural seaweed modified mortar for sustainable concrete production. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018) , 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-6., 342 (012008). ISSN 1757-8981 (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2018) Enhanced Methane Yield by Codigestion of Sewage Sludge with Microalgae and Catering Waste Leachate. Water Environment Research, 90 (9). pp. 835-839. ISSN 1061-4303 (Print); 1554-7531 (Online). (Published)

Siddique, Md. Nurul Islam and Zularisam, A. W. (2018) Enhanced methane yield by co-digestion of sewage sludge with micro-algae and catering waste leachate. Water Environment Research. pp. 1-9. ISSN 1061-4303 (Print); 1554-7531 (Online). (Published)

Siti Nor Aishah, Yusoff (2018) A study on efforts in building resilient community towards flood in Pasir Puteh, Kelantan. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Nor Mirsa, Amiruddin (2018) Ergonomic risk factors for carpal tunnel syndrome symptoms among nurses at hospital in Melaka. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Siti Sabrina, Mohd Sukri (2018) Immobilisation of xylanase for xylooligosaccharides production from meranti wood sawdust. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Suzalina, Kamaruddin and Hadi, Manap (2018) An Ultraviolet Halitosis Detection Using An Open-Path Optical Fibre Based Sensor. International Journal of Engineering Inventions, 7 (5). pp. 25-30. ISSN 2278-7461. (Published)

Syafiq Fauzi, Kamarulzaman and Alsibai, Mohammed Hayyan (2018) Time-Change-Fuzzy-based Intelligent Vehicle Control System for Safe Emergency Lane Transition During Driver Lethargic State. Advanced Science Letters, 24 (10). pp. 7554-7558. ISSN 1936-6612. (Published)

Syamiza, Ghazali (2018) Design the circuit to generate square wave for electroporation technique. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Syazana, Mohamad Pauzi and Normadyzah, Ahmad and M. F., Yahya and Mohd Azmir, Arifin (2018) The effects of antifoam agent on dead end filtration process. In: 3rd International Conference on Global Sustainability and Chemical Engineering, ICGSCE 2017 , 15-16 February 2017 , Marriot Hotel, Putrajaya; Malaysia. pp. 1-6., 358 (012038). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

T

Tan, Jia Xiang (2018) Enhance sustainable methane production from anaerobic co-digestion of POME using UASB (hydraulic retention time). Faculty of Engineering Technology, Universiti Malaysia Pahang.

W

Wan Amalin Suraya, Wan Arifin (2018) The development of energy-efficient vehicle using natural gas technologies (NGV). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Wan Nur Amira Shafikah, Wan Mohd Fazli (2018) Barbeque with air ventilation system. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Wan Zulaisa Amira, Wan Jusoh and Sunarti, Abd Rahman and Abdul Latif, Ahmad and Nadzirah, Mohd Mokhtar (2018) Interaction Analysis of Thin Film Composite Membrane Using Trimesoyl Chloride - Piperazine by Dynamic Molecular. In: Proceedings Book: National Conference for Postgraduate Research (NCON-PGR 2018) , 28-29 August 2018 , Universiti Malaysia Pahang, Gambang, Pahang. pp. 225-231.. ISBN 978-967-22260-5-5 (Published)

Widad, Md. Jamaluddin (2018) Study the performance of hydrokinetic turbine for home power. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Wong, Jung Weng (2018) Enhanced sustainable methane production from anaerobic co-digestion of POME using UASBR (pH effects). Faculty of Engineering Technology, Universiti Malaysia Pahang.

Wong, Shin Yie (2018) Statistical analysis of factors affecting monoclonal antibody production by using principal component analysis : physiological characteristics of cell line. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Y

Yasir, Hashim and Abdul Hafiz, Mohd Idzha and Jabbar, Waheb A. (2018) The design and implementation of a wireless flood monitoring system. Journal of Telecommunication, Electronic and Computer Engineering, 10 (3-2). pp. 7-11. ISSN 2180-1843 (Print); 2289-8131 (Online). (Published)

Yee, Yong Lee and Mohd Fadhil, Md Din and Zainura, Zainon Noor and Iwao, Kenzo and Shazwin, Mat Taib and Singh, Lakhveer and Nur Hafizah, Abd Khalid and Anting, Nickholas and Eeydzah, Aminudin (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement, 118. pp. 61-72. ISSN 0263-2241. (Published)

Z

Z. A. M., Fauzi and Muhamad Arifpin, Mansor (2018) Development of Dynamic Programming Algorithm for Maintenance Scheduling Problem: A Conceptual Paper. International Journal of Engineering Technology And Sciences (IJETS), 5 (1). pp. 34-43. ISSN 2289-697X. (Published)

Z. A. M., Hazreek and A. F., Kamarudin and S., Rosli and A., Fauziah and M. A. K., Akmal and M., Aziman and A. T. S., Azhar and M. I. M., Ashraf and M. Z. N., Shaylinda and Y., Rais and M. F., Ishak and M. N. A., Alel (2018) Integral Analysis of Seismic Refraction and Ambient Vibration Survey for Subsurface Profile Evaluation. In: Journal of Physics: Conference Series, International Seminar on Mathematics and Physics in Sciences and Technology (ISMAP 2017) , 28-29 October 2017 , Batu Pahat, Johor. pp. 1-12., 995 (012073). ISSN 1742-6596 (Published)

Zid, Chaher and Narimah, Kasim and Benseghir, Hocine and Kabir, M. Nomani and Abdullah, Ibrahim (2018) Developing an Effective Conceptual Framework for Safety Behaviour in Construction Industry. In: E3S Web of Conferences: International Conference on Civil and Environmental Engineering (ICCEE 2018) , 2-5 October 2018 , Kuala Lumpur, Malaysia. pp. 1-12., 65. ISSN 2267-1242 (Published)

Zuriana, Sidi Ahmad and Mimi Sakinah, A. M. (2018) Effect of time, moisture content, and substrate amount on sorbitol production using entrapment of Lactobacillus plantarum (BAA-793) in sodium alginate beads. Food Bioscience, 21. pp. 27-33. ISSN 2212-4292. (Published)