Items where Year is 2011

Click here for a simple search.
[feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
 
 
Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | P | R | S | T | U | W | Y | Z
Number of items: 647.

A

A. R., Yusoff and Mohamed Reza Zalani, Mohamed Suffian and Mohd Yusof, Taib (2011) Literature Review of Optimization Techniques for Chatter Suppression In Machining. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 47-61. ISSN 2289-4659 (print); 2231-8380 (online)

Abbas Saliimi, Lokman (2011) Chatbot development in data representation for diabetes education. Masters thesis, Universiti Malaysia Pahang.

Abd Jalil, Borham (2011) Pengaruh Khilafah Othmaniyyah Turki Dalam Pentadbiran Kerajaan Johor Bagi Memartabatkan Sebuah Negara Islam Merdeka Di Asia Tenggara. In: Simposium Isu-Isu Sejarah dan Tamadun Islam (SISTI 2011) Peringkat Kebangsaaan, 8-10 April 2011 , Universiti Kebangsaan Malaysia, Bangi. . (Unpublished)

Abd Jalil, Borham and Asar, Abdul Karim and Kamaruzaman, Jusoff and Azwin Arif, Abdul Rahim and Mohammad Musab, Azmat Ali and Nor Yazi, Khamis and Mohammad Affendy, Omardin (2011) The Practicality of AsarFonts for Islamic and Arabic Studies. Middle-East Journal of Scientific Research, 7 (6). pp. 1056-1060. ISSN 1990-9233

Abdul Adam, Abdullah and R., Mamat and Kidoguchi, Yoshiyuki and Yatsufusa, Tomoaki (2011) Analysis of Straight Vegetable Oil (SVO) Spray Characteristic and Droplets Distribution By Using Nano-Spark Shadowgraph Photography Technique. In: The 3rd International Renewable Energy Congress, 19-22 December 2011 , Japan. . (Unpublished)

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman (2011) Subgrade Stabilization Assessment Of Kuantan Clay Using Lime, Portland Cement, Fly Ash, And Bottom Ash. In: 9th National Conference on Road Engineering of Indonesian Road Development Association (IRDA), 13-18 November 2011 , Mercure Convention-Hotel, Ancol, Jakarta, Indonesia. . (Unpublished)

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman and Usama Juniansyah, Fauzi (2011) Kuantan Clay Properties and Examination of Fly Ash and Bottom Ash Utilization as Soil Stabilizer. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 27-31. ISSN 2180-2742

Ade Chandra, Iwansyah (2011) Studies of water-soluble extract of Labisia Pumila var Alata of selected geographic origins. Masters thesis, Universiti Malaysia Pahang.

Aguk Zuhdi, Muhammad Fathallah (2011) Design and simulation of a single cylinder high speed spark ignition linear engine with spring system. PhD thesis, Universiti Malaysia Pahang.

Ahmad Aiman, Azmi (2011) Design and fabrication of multi touch screen keyboard table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fakhri, Ab. Nasir (2011) Peningkatan halaju suapan maksimum penginterpolasi CNC dedenyut rujukan menggunakan pengaturcaraan selari. Masters thesis, Universiti Malaysia Pahang.

Ahmad Khairul Azhar, Ahmad Kamal (2011) Sustainability approach in modeling and improvement of finger type slug catcher in gas processing plant. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Nazif, Noor Kamar and Ezrin Hani, Sukadarin and Lee, Chia Kuang and Ahmad Rasdan, Ismail (2011) A Study on the Suitability of Science Laboratory Furniture in Malaysian Secondary School. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM2011) , 5-6 November 2011 , Hotel Seri Malaysia, Perlis, Malaysia. . (Unpublished)

Ahmad Rasdan, Ismail and M.Z., Nuawi and N.F., Kamaruddin (2011) Comparative Study Of Whole-Body Vibration Exposure Between Train And Car Passengers: A Case Study In Malaysia. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul . pp. 490-503. ISSN 1985-9325(Print); 2180-1606 (Online)

Ahmad Solihin, Ahmad Syukri (2011) Online fuel consumption cost calculator (OFCCC). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ahmad Zaim Solehin, Che Hasan (2011) Modelling and simulation of modified skyhook control for semi-active suspension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Ziad, Sulaiman and Azilah, Ajit and R. M., Yunus and Chisti, Yusuf (2011) Ultrasound-assisted fermentation enhances bioethanol productivity. Biochemical Engineering Journal . pp. 141-150.

Ainal Marhaton, Abd Ghani (2011) CENFED sedia latihan profesional. Berita Harian .

Ainal Marhaton, Abd Ghani (2011) CENFED tingkat prestasi syarikat. Berita Harian .

Ainal Marhaton, Abd Ghani (2011) Chemital diiktiraf. Harian Metro .

Ainal Marhaton, Abd Ghani (2011) UMP galak pelajar berbahasa Mandarin. Berita Harian .

Aini Norhidayah, Mohamed (2011) Determination of thermal oxidation marker of frying palm oil in relation to total polar compounds. Masters thesis, Universiti Malaysia Pahang.

Aishah, Che Mohd (2011) FSKKP final year student-supervisor matchmaking expert system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Aliman, Omar (2011) Heuristic Based Placement Technique for Distributed Generation. In: The 5th International Power Engineering and Optimization Conf. (PEOCO2011), 6-7 June 2011 , Shah Alam, Selangor, MALAYSIA. . (Unpublished)

Ambarwati, Dessy (2011) Characterization and process optimization of Melastoma malabathricum l. extract. Masters thesis, Universiti Malaysia Pahang.

Amir, Abdullah (2011) Design and analysis of wheelchair according to human factor engineering. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Amirul Fazlan, Ramli (2011) Performance of sand cement block under axial load with different eccentricity. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Andrew, Yau-hau Tse (2011) Are You Superstitious? A Survey on Chinese Attitudes towards Homophonic Word Taboo. International Journal of Arts and Sciences, 4 (17). pp. 359-370. ISSN 1944-6934 (CD ROM)

Andrew, Yau-hau Tse (2011) A Comparison of Language Learning Strategies Adopted by Secondary and University Students in Hong Kong. International Journal of Business and Social Science, 2 (11). pp. 29-34. ISSN ISSN 2219-1933 (Print), 2219-6021 (Online)

Andrew, Yau-hau Tse (2011) Linguistic Word Taboos in Chinese Culture. British Journal of Humanities and Social Sciences, 1 (2). pp. 134-145. ISSN 2048-1268

Andrew, Yau-hau Tse (2011) Social and Psychological Impacts of SMS Texting on Malaysian University Students. In: Solls INTEC 2011, 11-12 May 2011 , Equatorial Hotel, Bangi. pp. 1-6..

Andrew, Yau-hau Tse (2011) To Be Anxious or Not to be Anxious--That's the Question in Public Speaking. In: 4th Biennial International Conference on the Teaching and Learning of English in Asia: Forging Ahead, 10-12 November 2011 , Hard Rock Hotel, Penang. pp. 1-10..

Andrew, Yau-hau Tse (2011) Which One is More Literary - A Speech or a Visitor's Guide? International Journal of Humanities and Social Science, 1 (5). pp. 237-241. ISSN 2219-1933 (print), 2219-6021 (online)

Annas Robani, Aminudin (2011) Analysis of slope failure at Maran highway using slope/w software. Faculty of Civil & Earth Resources, Universiti Malaysia Pahang.

Anwar, Ahmad and Rumana, Ghufran and Zularisam, A. W. (2011) Phytosequestration of Metals in Selected Plants Growing on a Contaminated Okhla Industrial Areas, Okhla, New Delhi, India. Water, Air, & Soil Pollution, 217 (1). pp. 255-266. ISSN 0049-6979(Print); 1573-2932(Online)

Asdarina, Yahya (2011) Kajian terhadap pelbagai teknik pengekstrakan minyak pati dari tanaman nilam (pogostemon cablin benth). Masters thesis, Universiti Malaysia Pahang.

Asrol, Awang (2011) Tengku Abdullah dilantik. Harian Metro .

Aswany, Omar (2011) Rangsang murid untuk berjaya. Sinar Harian .

Audi Munir, Mahmud (2011) Site investigation, sampling and slope stability analysis at kilometer 141 KL-Kuantan highway. Faculty of Civil & Earth Resources, Universiti Malaysia Pahang.

Azizan, Ramli and Mohd Shaiful Zaidi, Mat Desa (2011) The Importance of Ecological and Spiritual Approaches in Chemical Engineering towards Practical Conception of Sustainable Development. In: The Inaugural Asian Conference on Sustainability, Energy and the Environment 2011, 2-5 Jun , Osaka, Japan. .

Azizul, Aziz (2011) Assignment box alert for student (ABA). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azizun, Asmat (2011) Automated imaging system for determine percentage of broken rice. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Azlina, Ismail and Intan Suhana, Mohd Razelan and A., Zulkiple and Siti Fatimah, Che Osmi and Norhaiza, Ghazali and Aizat, Alias (2011) Microscopic Simulation & Microscopic Analytical Model Comparison in Analyzing a Signalized Intersection. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 19-25. ISSN 2180-2742

Azma, Abdullah and Liu, Shaoying (2011) Capturing Safety Properties for Safety-critical Systems using SOFL. In: 2011 First ACIS/JNU International Conference on Computers, Networks, Systems and Industrial Engineering (CNSI), 23-25 May 2011 , Jeju Island. pp. 186-192..

Azmi Raif Nur, Abd Wahab (2011) Housing loan evaluation system using artificial neural network. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

B

Boey, Peng Lim and Gaanty Pragas, Maniam and Shafida, Abd Hamid and Mohamed Hag Ali, Dafaalla (2011) Utilization of Waste Cockle Shell (Anadara granosa) in Biodiesel Production from Palm Olein : Optimization Using Response Surface Methodology. Fuel, 90 (Issues). pp. 2353-2358. ISSN 0016-2361

C

C. K. M., Faizal and Mohib Reza, Kazimi and Iqbal, Ahmed (2011) A Short Review of Hydrophilic Surface Modification Methods for Low Density Poly Ethylene. In: International Conference on Chemical Innovation (ICCI 2011), 23-24 May 2011 , TATI University College. pp. 203-206..

C. K. M., Faizal and Shareena, Mohd Sharif (2011) Application of Factorial Design Analysis to Control Bisphenol A MIP fabrication. In: Proceeding of International Conference Of Chemical Engineering And Industrial Biotechnology In Conjunction With 25th Symposium Of Malaysian Chemical Engineer (ICCEIB-Somche) 2011, 28 November - 1 December 2011 , Kuantan, Pahang. pp. 1-6..

Chang, Chun Kit (2011) Design of water bike for UMP Pekan lake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chee, Sai How (2011) Fabrication of perpetual motion water drinking toy bird. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Cheng, Hock Tian (2011) Engineering Properties of Epoxy Polymer Cement Concrete Reinforced with Glass Fibers. Journal of Engineering and Applied Sciences, 6 (3). pp. 191-199. ISSN 1816-949X

Cheng, C. K. (2011) Synthesis gas production from glycerol steam reforming over alumina supported bimetallic Co-Ni catalyst. PhD thesis, The University of New South Wales Sydney Australia.

Chew, Pei Ting (2011) Car management using radio frequency identification (RFID). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Chin, S. Y. (2011) Kinetic Model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor. World Academy of Science, Engineering and Technology, 76 (34). ISSN 2010-3778

Choong Hooi, Goh (2011) Network based E-learning system for secondary school. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

D

Ding, Gong Tao (2011) The optimisation and scale-up of microalgae cultivation for high level oil content for biodiesel. Masters thesis, Universiti Malaysia Pahang.

E

Epin, Vorathin (2011) Design and fabrication of smart mousetrap. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Erna Qurratu' Aini, Ruslan (2011) Study on extraction of pandan flavor from pandan leaves using steam distillation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

F

F. K., H. and Noor Azlinna, Azizan (2011) The Best Trading System to Generate Profits. In: The International Conference on Financial Engineering and Risk Management Application 2011, 26-27 Spetember 2011 , Bandung Institute of Technology, Bandung, Indonesia. pp. 1-6.. (Unpublished)

Fadzhila, Sabri (2011) Decision support system for dental clinic. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fakharuddin, Azhar (2011) A smart metering for energy management system via GSM-SMS based protocol. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Farah, Abdullah (2011) Online diet planning system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Farhana, Abdul Samad (2011) Cybercafe system using client-server application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Fazeeda, Mohamad and Razman, Mat Tahar (2011) Modeling and Simulation of Palm Oil Mill Towards Effective Supply Chain Manegement. In: International Federation of Operational Research Societies 2011, 10-15 July 2011 , Melbourne Convention and Exhibition Center, MElbourne, Australia. pp. 1-10..

Finny, Mohamed (2011) Kolaborasi akademik UMP-Politeknik pemangkin kerjasama lebih strategik. CREATE (14). ISSN 1823-7487

G

Gaanty Pragas, Maniam and Boey, Peng Lim and Ganesan, Shangeetha (2011) Regeneration and Reutilization of Oil Laden Spent Bleaching Clay via In-Situ Transesterification and Calcinations. Journal of the American Oil Chemists' Society, 88 (Issue ). pp. 1247-1253. ISSN 0003-021X (Print), 1558-9331 (Online)

Gaanty Pragas, Maniam and Boey, Peng Lim and Muhammad Idiris, Saleh and Norzahir, Sapawe and Shangeetha, Ganesan and Mohamed Hag Ali, Dafaalla (2011) Pyrolysis of Residual Palm Oil in Spent Bleaching Clay by Modified Tubular Furnace and Analysis of the Products by GC-��MS. Journal of Analytical and Applied Pyrolysis, 91 (Issue ). pp. 199-204. ISSN 0165-2370

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan (2011) Ultrasound Aided in Situ Transesterification of Crude Palm Oil Adsorbed on Spent Bleaching Clay. Energy Conversion and Management, 52 (Issue ). pp. 2081-2084. ISSN 0196-8904

Gaanty Pragas, Maniam and Boey, Peng Lim and Shangeetha, Ganesan and Sze-Xooi, Lim and Sau-Lai, Lim and Melati, Khairuddean (2011) Utilization of BA (boiler ash) as Catalyst for Transesterification of Palm Olein. Energy, 36 (Issue ). 5791 -5796. ISSN 0360-5442 (Print), 1873-6785 (Online)

Gaanty Pragas, Maniam and Peng Lim, Boey and Shafida, Abd Hamid (2011) Performance of Calcium Oxide as a Heterogeneous Catalyst in Biodiesel Production: A Review. Chemical Engineering Journal, 168 (Issue ). pp. 15-22. ISSN 1385-8947

Gaddafi, Musli and Shahrul, Redzuan (2011) Sekatan halang sebar virus. Harian Metro .

Gapar, Francis Giang (2011) Design and develop robotic arm for automated guided conveyor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

H

Hafizoah, Kassim (2011) The impact of using a multimedia learning tool on mechanical engineering students' creativity. Masters thesis, International Islamic University Malaysia .

Hai, Jing (2011) Dynamic analysis of photovoltaic/wind turbine hybrid micro-grid energy system. Masters thesis, Universiti Malaysia Pahang.

Halim, Mat Ali (2011) UMP, ITT tawar ijazah berkembar farmaseutikal. Berita Harian .

Hamzah, Ahmad and Namerikawa, Toru (2011) Robust Filter Development to Pursue Robotic Localization and Mapping Problem. In: National Conference on Electrical and Electronics Engineering (NCEEE 2012), 08-09 May 2012 , UTHM Library. pp. 1-4..

Handrizal, M (2011) An improved algorithm for channel allocation on direct sequence spread spectrum. Masters thesis, Universiti Malaysia Pahang.

Hanif, Kasmani (2011) Flame propagation in spark ignition engine combustion process using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasan, Ahmad and Ahmad Fazullah, Ahmad Zainal Abidin and Abd Jalil, Borham (2011) Halal Studies In Universities: A Way Forward To Manage Halal Business. In: International of Arts and Jornal Conference (IJAS2011), 3 June 2011 , Austria. . ISSN ISSN 1943-6114

Hasif, Rosazanam (2011) Application of probabilistic analysis in finite element modelling of two dimensional truss. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Hasmadi, Hassan (2011) Teaching and Learning in Industries: Are We Malaysian Workers Really Ready for the E-Training. Journal of Technical Education and Training (JTET), 3 (2). pp. 55-65. ISSN 2229-8932

Hasnah, .Hussiin (2011) Bangsa yang maju adalah bangsa yang celik sejarah. CREATE . p. 68. ISSN 1823-7487

Hasnah, Hussiin (2011) Kecemerlangan IPT: anugerah atau sumbangan? CREATE (58). ISSN 1823-7487

Hasnah, Hussiin (2011) Pesanan untuk pelajar dan mahasiswa Malaysia. CREATE (60). ISSN 1823-7487

Hasrul Harfizal, Mohd Zait (2011) Laboratory management system (LMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Hazizi Azri, Ahmad Sabri (2011) Experimental study of pack carburizing of carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hegde, Gurumurthy and Komitov, Lachezar and Hee Lee, Seung (2011) P-127: Fast Liquid Crystal Light Shutter. SID Symposium Digest of Technical Papers, 42 (1). pp. 1587-1589. ISSN 2168-0159

Hegde, Gurumurthy and Komitov, Lachezar and Kolev, Dimitar (2011) Fast Liquid Crystal Light Shutter. Journal of Physics D: Applied Physics, 44 (44). pp. 1-5. ISSN 0022-3727 (print); 1361-6463 (online)

Hegde, Gurumurthy and Matharu, A. S. and Karadakov, P. B. and Cowling, S. J. and Komitov, Lachezar (2011) Exploring the Mesomorphic Potential of 2,4-disubstituted Thiophenes: A Structure-property Study. Liquid Crystals, 32 (2). pp. 207-232. ISSN 0267-8292 (print); 1366-5855 (online)

Hemin M., Mohyaldeen (2011) Analysis of an automobile suspension arm using the robust design method. Masters thesis, Universiti Malaysia Pahang.

Herawan, Tutut and Jasni, Mohamad Zain (2011) An Adjustable Approach to Interval-Valued Intuitionistic Fuzzy Soft Sets Based Decision Making. In: The third ACIIDS 2011, 20-22 April 2011 , Daegu, South Korea. .

Herawan, Tutut and Jasni, Mohamad Zain (2011) Data Filling Approach of Soft Sets under Incomplete Information. In: The Third ACIIDS 2011, 20-22 April 2011 , Daegu, South Korea. .

Hernawati, Lahading (2011) Development of chitosan based adsorbent for the removal of residual oil from palm oil mill effluent (POME). Masters thesis, Universiti Malaysia Pahang .

Huey Ning, Chan (2011) Furniture shop management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Husnul Fatimah, Husrin (2011) Liquid membrane tip extraction of malathion. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

I

Ida Rizyani, Tahir (2011) Perkongsian Pengalaman Menjadi Seorang Penulis Buku. [Audio] (Unpublished)

Imran Edzereiq, Kamarudin (2011) Countdown to True Wireless Broadband. Bit@FSKKP . p. 10. ISSN 1985-7969

Intan Azira, Azahar (2011) Mail notification system using SMS. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Irwan Shafrizan, Ismail (2011) UMP tubuh COE tingkat kemahiran IT. Berita Harian .

Ismail, Abdullah (2011) Kor Suksis UMP curah bakti di Johor. CREATE (42). ISSN 1823-7487

Iwansyah, Ade Chandra and M. M., Yusoff (2011) Comparative Evaluation Of Total Phenolics And Free Radical Scavenging Activity Of The Aqueous Extracts Of Labisia Pumila Var. Alata From Malaysia And Indonesia. In: The 2nd International Conference On Biotechnology And Food Sciences, 01-03 April 2011 , Bali, Indonesia. . (Unpublished)

Izirwan, Izhab and Siti Zubaidah, Sulaiman and Mohd Zulkifli, Mohamad Noor (2011) Effect Of H2 Enrichment On The Explosive Limits Of Liquefied Petroleum Gas (LPG) In Conventional Combustion. In: Energy and Sustainability 2011, 11-13 April 2011 , Alicante, Spain. . (Unpublished)

Izzati Farrahiyah, Mazlan (2011) Development of images to braille conversion software for alphabets using template matching and rule based. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

J

Jahir Hussain, Fathima Shahitha and M. M., Yusoff (2011) Synthesis of Gold Dendrites in a Green Chemistry Approach Using Hydroxyethyl Cellulose. In: International Proceedings of Chemical, Biological and Environmental Engineering (IPCBEE), 28-30 December 2011 , Dubai, United Arab Emirates. pp. 1-5., 25.

Jasni, Mohamad Zain and K.F., Rabbi and M.A., Ibrahim Fakharaldien and Norrozila, Sulaiman (2011) XRecursive, An Efficient Relational Method to Store XML Data. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 2910-2916.

Jasni, Mohamad Zain and Rahmat Widia, Sembiring (2011) The Design of Pre-Processing Multidimensional Data Based on Component Analysis. Computer and Information Science, 4 (3). pp. 106-115. ISSN 1913-8989 (Print); 1913-8997 (Online)

Jessica Olivia @ Simon Paie, Anak Paie (2011) Inventory management system using RFID for FSKKP laboratory in UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Joe Wee, Tan (2011) Common paddy disease identifier. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Jolius, Gimbun and Mohd Irwan Shah, Md Zain (2011) CFD Study On The Performance Of Oxygen Lance For Partial Combustion Unit At Direct Reduction Plant. In: Internation Conference on Chemical Innovation, 23-24 May 2011 , TATI UC. pp. 1-4.. (Unpublished)

Juwari, (2011) A new tuning method for two-degree-of-freedom internal model control under parametric uncertainty. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

K

K., Kadirgama and M. M., Noor and K. V., Sharma (2011) Tool Life and Wear Mechanism when Machining Hastelloy C-22HS. Wear, 270 (3-4). pp. 258-268. ISSN 0043-1648

K., Kadirgama and M. M., Rahman and Ahmad Rasdan, Ismail and R. A., Bakar (2011) Finite Element Analysis of Hastelloy C-22HS in End Milling. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 37-46. ISSN 2289-4659 (print); 2231-8380 (online)

Kamal, Ariffin (2011) Study of wear mechanism in the contact between table liner and roller of vertical roller mills. Masters thesis, Saitama University.

Kamal, Yusoh (2011) Amalan terbaik pemantapan P&P. CREATE . ISSN 1823-7487

Khairatul Ainal, Abdul Karim (2011) UMP jalin kerjasama dengan TM. Utusan Malaysia .

Khairatun Najwa, Mohd Amin and Nurul Sa'aadah, Sulaiman and Muhammad Shahir, Hasan and Ainun Jariah, Sansuri (2011) Synthesis And Swelling Behavior Of Agro-Waste Based Superabsorbent Composites. In: 5th International Congress of Chemistry and Environment (ICCE 2011), 27-29 May 2011 , Port Dickson. pp. 1-5.. (Unpublished)

Khairul Fikri, Muhamad (2011) Optimization of cutting parameters for CO2 laser beam cutting using variable wiight grey-taguchi method. Masters thesis, Universiti Malaysia Pahang.

Khairunisa, Muthusamy and Mohd Warid, Hussin (2011) Durability Performance of Palm Oil Fuel Ash Cement Based Aerated Concrete in Marine Environment. In: Proceedings of the 1st International Conference And Exhibition Of Women Engineer 2011, 20-22 November 2011 , Bukit Gambang Resort, Kuantan, Pahang, Malaysia. pp. 284-289..

Khan, Israr Ahamd and Khan, Musaddiq Majid (2011) Malāmiḥu al-Itijāhi al-Maqaṣidi fi al-Tafsir: al-Kulyāt al-Khamsa fi al-Tafsir al-Rāzi Namudhjan. Journal of Islam In Asia, 8 (3). pp. 193-213. ISSN 1823-0970

Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and R. A., Bakar (2011) Artificial Intelligence Model to Predict Surface Roughness of Ti-15-3 Alloy in EDM Process. World Academiy of Science, Engineering and Technology, 74 .

Khoh, Huey Hun (2011) E-system for education company. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Koay, Abigail May Yee (2011) Log file analysis using signature detection (LoFA-SD). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Kok, Yin Hui (2011) Design and fabrication of stark whiteboard. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Korada, Viswanatha Sharma and Azmi, W. H. and R. A., Bakar and M. M., Noor and K., Kadirgama and D. M. R., Prasad and Mohd Irza Pairuz, Zamri (2011) Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts. Project Report. Universiti Malaysia Pahang. (Unpublished)

L

L. H., Shah and Tsuchiya, B. and Nagata, S. and Shikama, T. (2011) The Effect of Gamma-rays on the Electrical Properties of Zr55Ni5Al10Cu30 Bulk Metallic Glass. Journal of Nuclear Materials, 417 (1-3). pp. 822-825. ISSN 0022-3115

L. Syam, Sundar and K. V., Sharma (2011) An Experimental Study On Heat Transfer And Friction Factor Of AL2O3 Nanofluid. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 99-112. ISSN 2289-4659 (print); 2231-8380 (online)

Laupa, Junus (2011) Perisian menganggar kos minyak. Utusan Malaysia .

Laupa, Junus (2011) Teknologi kitar semula minyak hitam. Utusan Malaysia .

Le, Ho Cheong (2011) Current issues of social network services. Bit@FSKKP . pp. 22-23. ISSN 1985-7969 (Unpublished)

Leakath, Muhammad Zafran (2011) Characterization of pysio-chemical properties of novel one stop chemical method in preparations of copper nanofluids and possible explanations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Lee, Wei De (2011) Improving the monitoring mechanism of current warehouse monitoring system with weight monitoring. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Liew, Wei Bing (2011) Online industrial sales and support system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Liew, Siau-Chuin and Jasni, Mohamad Zain (2011) The Usage of Block Average Intensity in Tamper Localization for Image Watermarking. In: IEEE 4th International Congress on Image and Signal Processing (CISP 2011), 15-17 October 2011 , Shanghai, China. pp. 1044-1048., 2. ISBN 978-1-4244-9304-3

Lim, De Jiang (2011) Webcam based maker tracking application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Kim Khiam (2011) Object distance determination application using image processing technique. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Lim, Cheh Siang (2011) Dental measurement system for UIAM. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Liong, Boon Yaun (2011) Faculty timetabling using genetic algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

M

M., Ishak and Khan, Md. Ashikur Rahman and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Surface Roughness of Ti-6Al-4V In Electrical Discharge Machining: A Regression Model. Journal of Mechanical Engineering and Sciences (JMES), 1 (Dec 20). pp. 16-24. ISSN 2231-8380 (online)

M., Shakaib and R. M., Yunus (2011) Effect of Permeation Velocity on Flow Behavior and Pressure Drop in Feed Channels of Membranes. In: ASEAN Conference on Scientific and Social Science Research (ACSSSR2011), 01 Jul 2011 . . (Unpublished)

M. F. F., Ab Rashid and Tiwari, Ashutosh and Hutabarat, Windo (2011) An Integrated Representation Scheme for Assembly Sequence Planning and Assembly Line Balancing. In: Proceedings of the 9thInternational Conference on Manufacturing Research (ICMR 2011), 6-8 September 2011 , Glasgow, UK. pp. 125-131..

M. H. M., Haniff and Ahmad Rasdan, Ismail and B. M., Deros and M. N. A., Rahman and K., Kadirgama (2011) The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry. International Journal of Automotive and Mechanical Engineering (IJAME), 3 . pp. 306-317. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Noor and K., Kadirgama and M. M., Rahman (2011) Particle Swarm Optimisation Prediction Model for Surface Roughness. International Journal of Physical Sciences, 6 (13). pp. 3082-3090. ISSN 1992-1950

M. M., Noor and M. M., Rahman and K., Kadirgama (2011) Current Research Trends on Dry, Near-Dry and Powder Mixed Electrical Discharge Machining. Advanced Materials Research, 264-26 . pp. 956-961. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Pattern Recognition Method to Predict Recycling Strategy for Electronic Equipments. Advanced Materials Research, 264-26 . pp. 949-955. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and M. A., Maleque (2011) Prediction of Recycle Method using Relevance Vector Machine. Advanced Materials Research, 264-26 . pp. 1557-1562. ISSN 1022-6680

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. A., Maleque (2011) Modeling, Analysis and Fatigue Life Prediction of Lower Suspension Arm. Advanced Materials Research, 264-26 . pp. 1557-1562. ISSN 1022-6680

M. M., Noor and M. M., Rahman and R. A., Bakar and K., Kadirgama (2011) Linear Static Response of Suspension Arm based on Artificial Neural Network Technique. Advanced Materials Research, 213 (2 . pp. 419-426. ISSN 1022-6680

M. M., Noor and M. S. M., Sani and M. M., Rahman and K., Kadirgama (2011) Identification of Dynamics Modal Parameter for Car Chassis. Materials Science and Engineering, 17 (1). ISSN 1757-899X

M. M., Noor and T. F., Yusaf (2011) Implementation of Conditional Moment Closure using the Taylor Expansion and Finite Differences. In: International Conference of Mechanical Engineering Research (ICMER) 2011, 5-7 Dec, 2011 , Malaysia. . (Unpublished)

M. M., Noor and T. F., Yusaf (2011) Study of Random Particle Interactions for Analysis of Diffusion Lengths in Turbulent Combustion Modelling. In: Australian Combustion Symposium, 29 Nov- 1 Dec 2011 , University of Newcastle. .

M. M., Rahman and A., Zulkifli and A. K., Ariffin (2011) Probabilistic Finite Element Analysis of Vertebrae of the Lumbar Spine Under Hyperextension Loading. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan . ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and A. A., Adebisi and M. A., Maleque (2011) Metal Matrix Composite Brake Rotor: Historical Development and Product Life Cycle Analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul . pp. 471-480. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2011) Optimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM using Copper Tungsten Electrode A Statistical Approach. Advanced Materials Research, 152-15 . pp. 1595-1602. ISSN 1022-6680

M. M., Hatifi and M. F., Hassan and A. R., Yusoff (2011) Simulation Study of Cutting Tool System Using Intelligent Active Force Control. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 62-74. ISSN 2289-4659 (print); 2231-8380 (online)

M. M., Noor and K., Kadirgama and A. K., Amiruddin and K. V., Sharma (2011) The Potential of Wind and Solar Energy in Malaysia East Coast: Preliminary Study at Universiti Malaysia Pahang (UMP). In: Energy and Sustainability 2011, 11 - 13 April 2011 , Alicante, Spain. . (Unpublished)

M. M., Noor and M. M., Rahman and K., Kadirgama and R. A., Bakar and M. F. A., Rahim (2011) Heat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine A Transient Approach. Advanced Materials Research, 152-15 . pp. 1909-1914. ISSN 1022-6680

M. M., Rahman and K., Kadirgama and M. M., Noor and R. A., Bakar and M. A. R., Khan (2011) Experimental Investigation into Electrical Discharge Machining of Stainless Steel 304. Journal of Applied Sciences , 11 (3). pp. 549-554. ISSN 1812-5654

M. M., Rahman and K. J. T., Jeffrey and F., Tarlochan (2011) Residual Strength of Chop Strand Mats Glass Fiber/Epoxy Composite Structures: Effect of Temperature and Water Absorption. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul . pp. 504-519. ISSN 1985-9325(Print); 2180-1606 (Online)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Khan, Md. Ashikur Rahman (2011) Optimization of Machining Parameters on Surface Roughness in EDM of Ti-6AI-4V using Response Surface Method. Advanced Materials Research, 213 (2 . pp. 402-408. ISSN 1022-6680

M. M., Yusoff (2011) Natural Products R&D Leads from Nature. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang. ISBN 9787-967-0120-05-8

M. M., Yusoff and Fazliana, Mansor and Gu, Harvest F. and Östenson, Claes-Göran and Wan Mohamud, Wan Nazaimoon (2011) Labisia Pumila Extract Down-regulates Hydroxysteroid (11-beta) Dehydrogenase 1 Expression and Corticosterone Levels in Ovariectomized Rats. Journal of Natural Medicines, 66 (2). pp. 257-264. ISSN 1340-3443, ESSN: 1861-0293

M. M., Yusoff and Halijah, Ibrahim and Nurulhusna, Abdul Hamid (2011) Chemical Characterization and Antimicrobial Activity of Rhizome Essential Oils of Very Closely Allied Zingiberaceae Species Endemic to Borneo: Alpinia Ligulata K. Schum. and Alpinia nieuwenhuizii Val. Chemistry and Biodiversity, 8 (5). pp. 916-923. ISSN 1612-1872 (print), 1612-1880 (online)

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Bachelor of Applied Sciences (Hon.) Material Technology. Eureka!, 4 (4). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Dr. Gaanty Pragas receives award from IKM. Eureka!, 4 (4). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) FIST's postgraduates during the 6th UMP convocation. Eureka!, 4 (4). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Four rare earth elements that will only get more important. Eureka!, 4 (4). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Fuel cell. Eureka!, 4 (4). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Omar Khayyam. Eureka!, 4 (4). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Signing of letter of intent (LOI) between FIST, UMP, FRIM and TPM. Eureka!, 4 (4). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Spotlight on faculty member Prof. Dr. Jose Rajan, Physicist. Eureka!, 4 (4). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Chin, Mei Lee and Siti Aisah, Harun and Norhayati, Nordin and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras and Nurul Nadia, Abd Razak (2011) Spotlight on graduate student, Azhar Fakharuddin, PhD (Advanced Materials. Eureka!, 4 (4). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Barbara McClintock. Eureka!, 4 (3). p. 3. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Biosensor technology. Eureka!, 4 (3). p. 3. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) LaTeX workshop. Eureka!, 4 (3). p. 1. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Pahang Matemadesa program. Eureka!, 4 (3). p. 1. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Spotlight on faculty member Associate Professor Dr. Md Rezau Karim, biochemist. Eureka!, 4 (3). p. 4. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Spotlight on graduate student Hazrulrizawati Abd Hamid, PhD (Industrial Chemistry) candidate. Eureka!, 4 (3). p. 4. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zahidee and Mohd Fazli, Farida Asras (2011) Statistical Packages for Social Sciences workshop (SPSS). Eureka!, 4 (3). p. 1. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Chin, Mei Lee and Norhayati, Nordin and Siti Aisah, Harun and Nenie Zuryati, Abdullah and Ezrinda, Mohd Zaihidee and Mohd Fazli, Farida Asras (2011) Algal biodiesel. Eureka!, 4 (3). p. 2. ISSN 1985-8240

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Abbas Ibn Firnas. Eureka!, 4 (2). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Ahmad Zewail. Eureka!, 4 (1). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Biorefinery. Eureka!, 4 (2). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) FIST -INTeRC strategic partnership in advance material R&D MoU signing. Eureka!, 4 (2). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) FIST students excel in postgraduate poster competition. Eureka!, 4 (2). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) FIST-Jabatan Pertanian Pahang work on jackfruit disease. Eureka!, 4 (2). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Material technology receives green light from MQA! Eureka!, 4 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Nuclear magnetic resonance spectroscopy. Eureka!, 4 (1). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Officiating ceremony and exhibition of Pahang Biodiversity- Biotechnology Research Centre of Excellence during Mini MAHA 2011. Eureka!, 4 (2). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Pahang Pan Asia Biodiversity Work Camp 2011. Eureka!, 4 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Spotlight on faculty member: Associate Professor Dr.Jinan Basheer Ahmed, solid state physics. Eureka!, 4 (1). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Spotlight on faculty member: Dr. Natanamurugaraj Govindan, marine bologist. Eureka!, 4 (2). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Spotlight on graduate student: Ade Chandra lwansyah, MSc ( industrial chemistry) candidates. Eureka!, 4 (2). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) Spotlight on graduate student: Tg. Mahizatulazwa Tg. Kamaruddin, MSc (Industrial Chemistry) candidate. Eureka!, 4 (1). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir@Lokman and Nurul Nadia, Abd Razak and Muhammad Najib, Muhammad Nor (2011) A visit to Technology Park Malaysia (TPM) on gaharu project. Eureka!, 4 (1). p. 2. ISSN 1985-8248

The Government of Malaysia as represented by the Ministry of Science, Technology and Innovation (2011) Process for Preparation Of Labisia Pumila Extract. US7879368B2.

M. N., Muhd Sidek and M. A., Megat Johari and M. F., Arshad and Mohd Faizal, Md Jaafar (2011) Behaviour of Metakaolin Concrete in Different Curing Condition. International Journal of Civil Engineering and Geo-Environmental . ISSN 2180-2742

M. R., Abdul Hamid and Abdullah, Ibrahim (2011) Education And Economic Development: A Historical Literature On Relations Between Human Capital And National Strategies. International Journal of Humanities and Social Science, 1 (9). pp. 252-257. ISSN 2220-8488 (print), 2221-0989 (online)

M. R., Abdul Hamid and Zainol, Mustafa and Fazli, Idris and M., Abdullah and N. R. M., Suradi (2011) Measuring Value - Based Productivity: A Confirmatory Factor Analytic (CFA) Approach. International Journal of Business and Social Science, 2 (6). pp. 85-93. ISSN 2219-1933 (Print); 2219-6021 (Online)

M. R., Abdul Hamid and Zainol, Mustafa and N. R. M., Suradi and Fazli, Idris and M., Abdullah (2011) Multi-Factor Of Employee Values: A Confirmatory Factor Analytics (CFA) Validation. African Journal of Business Management, 5 (32). pp. 12632-12640. ISSN 1993-8233

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah and Abdullah, Ibrahim (2011) Value-Based Performance Excellence Model: Case Studies at Malaysian Technical Universities. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 628-633. ISSN 1991-8178

M. S., Jadin and Haidar, Ahmed M. A. and John, Priscilla N. (2011) Optimal Configuration Assessment of Renewable Energy in Malaysia. Renewable Energy, 36 (2). pp. 881-888. ISSN 09601481

M. S., Jadin and Soib, Taib and Shahid, Kabir (2011) Thermal Imaging for Qualitative-Based Measurements of Thermal Anomalies in Electrical Components. In: Saudi International Electronics, Communications and Photonics Conference (SIECPC 2011), 24 - 26 April 2011 , Riyadh. pp. 1-6..

Madhiah, Othman (2011) Easy map a route map advisor for Universiti Malaysia Pahang (EZMAP-UMP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mahendran, Samykano and M. M., Rahman and Devarajan, Ramasamy and K., Kadirgama and Muhamad, Mat Noor and Mohd. Reza, Jailani and Wan Sharuzi, Wan Harun and Rusli, Ghani (2011) Development of micro-EDM with microactuator feed control system = membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan. Project Report. Universiti Malaysia Pahang. (Unpublished)

Mahendran, Samykano and T., Nagarajan and Dr., Majdi and D., Ramasamy and K., Kadirgama and M. M., Noor and Lee, Giok Chui and Mohd Fazli, Ismail (2011) Investigation of micromachining of silicon using micro-EDM = penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro. Other thesis, Universiti Malaysia Pahang.

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2011) A Computational Comparison between Revetec Engine and Conventional Internal Combustion Engines on the Indicated Torque. World Academy of Science, Engineering and Technology, 5 (4). pp. 348-350. ISSN 2010-3778

Makky, Essam A. and Park, Gui-Su and Choi, Ik-Won and Cho, Sung-Il and Kim, Hyunook (2011) Comparison of Fe(VI) (FeO4(2-)) and Ozone in Inactivating Bacillus Subtilis Spores. Chemosphere, 83 (9). pp. 1228-1233. ISSN 0045-6535

Malik, Mohammad Manzoor and Khan, Musaddiq Majid (2011) Al-fikr al-Hdāthi: Muḥammad Shaḥrur wa Taqsimuhu li Ayāt al-Qurʾān al-Karim fi Kitābhi "al-Kitāb wa al-Qurʾān" Namudhjan. Journal of Islam In Asia, 8 (4). pp. 129-153. ISSN 1823-0970

Mansor, Sulaiman (2011) Konsep 'Maslahah' Dalam Undang-undang Jenayah Islam dan Pembentukan Masyarakat Yang Baik: Tinjauan Khusus Terhadap Hukuman Hudud. In: Seminar Perundangan Islam dalam Masyarakat Kontemporari (ISLAC 2011), 18-19 november 2011 , Unisza, Terengganu. pp. 1-17.. (Unpublished)

Mansor, Sulaiman (2011) Panduan Strategi Pembinaan Akhlak Imani Menerusi Al-Quran: Kajian Berdasarkan Perbezaan Ayat-Ayat Makkiyah dan Madaniyah yang Berkenaan. In: Seminar on Revelation As Source of Civilization (SWAT 2011) 'Quran: The Origin of Knowledge and Innovation', 21-22 September 2011 , USIM. pp. 1-22.. (Unpublished)

Mansurov, Fatkhiddin and Faudzinaim, Badaruddin (2011) Khawaja Yusuf Hemedani: The Inspirer of Two Major Sufi Tariqas. Journal of Islamic Studies, Faculty of Theology, Harran University, Turkey, 26 (2). pp. 159-173. ISSN ISSN: 1303–2054

Mardilah, Noorazman (2011) Jabatan pembangunan & pengurusan harta transportation management system (JTMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Meng, Liu (2011) Identification and partial characterisation of locally isolated lipolytic bacteria. Masters thesis, Universiti Malaysia Pahang.

Mhd, Furqan (2011) Face recognition using eigenfaces and smooth support vector machine. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Mimi Rabita, Abdul Wahit (2011) Pemakaian jaket serlah identiti. Berita Harian .

Mimi Rabita, Abdul Wahit (2011) UMP hasilkan kaedah pembelajaran mudah ingat. Berita Harian, (26 Me . p. 6.

Mimi Rabita, Abdul Wahit (2011) UMP raih banyak anugerah di i-ENVEX. Berita Harian .

Mimi Sakinah, A. M. and Noor Suhana, Adzahar (2011) Application of Fractional Factorial Design (FFD) for Screening of Significant Factor in Influencing Succinic acid Production from Biodiesel Based Glycerol Using Escherichia Coli. In: 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO) 2011, 19-21 April 2011 , Kuala Lumpur. pp. 1-5..

Mimi Syafizah, Yusof (2011) Analyze of the difference of wastage level between residential and commercial buiding using prefabrication method. Bachelor of Civil Engineering, Universiti Malaysia Pahang.

Mohamad Faizol, Buang (2011) Flood analysis of Sungai Isap, Kuantan using different rainstorm hours. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohamad Idris, Ali and Youventharan, Duraisamy (2011) Application of GIS Analyzing Settlement Along Pekan-Kuantan Federal Road. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 65-70. ISSN 2180-2742

Mohamad Ilzam, .Jamat (2011) 3 projek penyelidikan cemerlang di Archimedes 2011. CREATE (21). ISSN 1823-7487

Mohamad Kamil, Mohammed (2011) Simulation models to optimise hydrogen fuelled engine performance. PhD thesis, Universiti Malaysia Pahang.

Mohamad Nafis, Jamaluddin (2011) Design and fabrication of adjustable work positioner. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zahir, Abdul Talib (2011) Patient record management system (PRMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohamad Zairi, Baharom and Gigih, Priyandoko and M.Z., Nuawi and S.M, Harris and L.M, Siow (2011) Eddy Current Braking Study for Brake Disc of Aluminium, Copper and Zink. In: Regional Engineering Postgraduate Conference (EPC) 2011, 4-5 October 2011 , Puri Pujangga, UKM. .

Mohamed Ariff, Ameedeen (2011) Main frame in our midst. Bit@FSKKP . p. 8. ISSN 1985-7969 (Unpublished)

Mohammad Affendy, Omardin (2011) Landskap edible serlahkan persekitaran sihat di dalam kampus. CREATE (58). ISSN 1823-7487

Mohammad Affendy, Omardin and Norzamzila, Mustafa and Khalimi Johan, Abd Hamid and Wan Dagang, Wan Ali (2011) New Impression of Hotel in Sustainable Building Conversion and Adaptation Through University Campus. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 1-5. ISSN 2180-2742

Mohammad Faiz Azmi, Ahmad Nordin (2011) The round wardrobe. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Razif, Abdul Rahman (2011) Investigating the effect of solid powder particle size on the turbulent multi-phase flow in pipelines. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohammad Thalhah Amir, Abdul Rahman (2011) UMP thesis management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohammed, Kamil and M. M., Rahman and R. A., Bakar (2011) Performance Evaluation of External Mixture Formation Strategy in Hydrogen-Fueled Engine. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 87-98. ISSN 2289-4659 (print); 2231-8380 (online)

Mohan, Arjunan (2011) Multimedia courseware for visually impaired (MCVI). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Akram, Abdul Razak (2011) 44 Juruaudit IPTA tingkat pengetahuan Audit ICT. CREATE . p. 52. ISSN 1823-7487

Mohd Ashraf, Ahmad and Yasmin, Abdul Wahab and Raja Mohd Taufika, Raja Ismail (2011) Non-collocated Fuzzy Logic and Input Shaping Control Strategy for Elastic Joint Manipulator: Vibration Suppression and Time Response Analysis. In: International Conference on Computer Control and Automation (ICCCA) 2011, 1-3 May 2011 , Jeju Island, South Korea. , 4 (June 2011). ISSN 1985-9325(Print); 2180-1606 (Online) (Unpublished)

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Nasrul Salim, Pakheri and Nor Maniha, Abdul Ghani and Raja Mohd Taufika, Raja Ismail (2011) Experimental investigations of command shaping techniques for antsway control of double pendulum gantry crane system = kajian penyiasatan teknik pembentukan arahan untuk kawalan anti-ayunan bagi sistem kren dwi-pendulum. Other thesis, Universiti Malaysia Pahang.

Mohd Ashraf, Ahmad and Muhammad Salihin, Saealal and Raja Mohd Taufika, Raja Ismail and Mohd Anwar, Zawawi and Ahmad Nor Kasruddin, Nasir and Mohd Syakirin, Ramli (2011) Single Input Fuzzy Controller With Command Shaping Schemes For Double-Pendulum Type Overhead Crane. In: AIP Conference Proceedings: The 4th Global Conference On Power Control And Optimization, 02-04 December 2010 , Damai Puri, Kuching, Sarawak. p. 113., 1337. ISBN 978-0-7354-0893-7

Mohd Azrul Hisham, Mohd Adib (2011) Analysis of Echocardiography Images Using Grid Independent Technique for Patients with Mitral Valve Problems (MVP). In: International Conference on Information Science and Application (ICISA 2011), , 26-29 April 2011 , Jeju Island, Korea. . (Unpublished)

Mohd Fairuz, Yusof (2011) UMP tingkatkan sistem IT. Utusan Malaysia .

Mohd Faizan, Jamaluddin and Jailani, Salihon and N., Zainol (2011) Factorial Analysis on Acetic Acid Production Using Banana Stem Waste. International Journal of Chemical and Environmental Engineering .

Mohd Faruq, Sa'adon (2011) Determination of basic soil properties and shear strength of Pekan soft clay. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Mohd Ferdaus, Musa (2011) UMP naib juara Pertandingan Debat Piala DYMM Sultan Zainal Abidin. CREATE (46). ISSN 1823-7487

Mohd Ghani, Awang and Suriya Kumar, Sinnadurai (2011) A Study on the Development of Strategic Tools in Study Orientation Skills towards Achieving Academic Excellence. Journal of Language Teaching and Research, 2 (1). pp. 60-67. ISSN 1798-4769

Mohd Ghani, Awang and Suriya Kumar, Sinnadurai (2011) Towards Enhancing Academic Excellence of Civil Engineering Undergraduates via Utilising Study orientation Devices. International Journal of Humanities and Social Science, 1 (4). pp. 203-207. ISSN 2220-8488 (print), 2221-0989 (online)

Mohd Hafiz, Ab Majid @ Aziz (2011) Glucose production from oil palm trunk. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hafiz, Mohd Hassin (2011) Affective computing in automotive industry. Bit@FSKKP . ISSN 1985-7969

Mohd Hanif, Mohd Ali (2011) Interactive learning environment for kids. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Idaham, Umar Ong (2011) Disaster recovery facilities in the main office? Bit@FSKKP . pp. 6-7. ISSN 1985-7969

Mohd Ikhwan, Ab Kadir (2011) Long term consolidation study on tropical peta at Pekan, Pahang, Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Izham, Ibrahim and Aman, Jantan (2011) A Secure Storage Model to Preserve Evidence in Network Forensics. In: Software Engineering and Computer Systems. Springer Berlin Heidelberg, Kuantan, Pahang, Malaysia, pp. 391-402. ISBN 978-3-642-22190-3

Mohd Najib, Razali (2011) Adsorption treatment of monoethanolamine (MEA) wastewater from oil and gas industry. Masters thesis, Universiti Malaysia Pahang .

Mohd Rafi, Mamat (2011) Gementar dilambung ombak. Harian Metro .

Mohd Rahmat, Ahmad Suhaimin (2011) Foldable and portable cupboard. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Riduwan, Ghazali (2011) Electrostatic Sensor in Circular and Rectangular Shape Electrode for Solid Dry Pneumatic Conveyor System. In: International Conference On Circuits, System and Simulation (ICCSS 2011), 28-29 May 2011 , First Hotel, Bangkok, Thailand.. .

Mohd Riduwan, Ghazali (2011) Rectangular Electrode Characteristic in Electrodynamic Solid Particle Measurement. In: International Conference on Electronic Devices, Systems & Applications (ICEDSA), 25 - 27 April 2011 , Boulevard Hotel, Kuala Lumpur. pp. 1-5..

Mohd Riduwan, Ghazali and Ahmad Nor Kasruddin, Nasir and Mohd Ashraf, Ahmad and Nasrul Salim, Pakheri (2011) Performance Comparison Between Fuzzy Logic Controller (FLC) and PID Controller for a Highly Nonlinear Two-wheels Balancing Robot. In: Informatics and Computational Intelligence 2011 (ICI 2011) , 12 14 Dec 2011 , Bandung, Indonesia. . (Unpublished)

Mohd Riduwan, Ghazali and M.F, Rahmat and I.T, Thuku and T., Tajdari and K., Yusoff (2011) Sensing and Filtering Characteristics of Electrostatic Sensors for Pneumatically Conveyed Particles. International Journal of the Physical Sciences, 6 (22). pp. 5091-5103. ISSN 1992-1950

Mohd Riduwan, Ghazali and Wan Ismail, Ibrahim and M.F, Rahmat (2011) Non-Intrusive Electrodynamic Characteristic Measurement for Circular Shape Electrode. In: International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. . (Unpublished)

Mohd Riduwan, Ghazali and Wan Ismail, Ibrahim and Nasrul Salim, Pakheri and M.F, Rahmat and M.F, Jusof (2011) Spatial Filtering Effect on Circular and Rectangular Electrode in Electrodynamic Sensor. In: 4th Engineering Conference (ENCON 2011), 28 Nov-1 Dec 2011 , Kuching, Sarawak, Malaysia. .

Mohd Ridzuan, Nordin and Tg Mahizatulazwa, Tg Kamaruddin and Yong, Liew Kong (2011) Synthesis and Characterization of Alumina Nanofiber Reinforced Poly Ether Ether Ketone (PEEK). Journal of Fundamental Sciences, 7 (2). pp. 156-163. ISSN 1823-626X

Mohd Saiful, Mohd Sahak (2011) 61 pelajar UMP sertai program apprentis MAI. Utusan Malaysia .

Mohd Solahuddin, Jaafar (2011) Development of images to braille conversion software for symbols using template matching with rules base (images to editable text for debraillso). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Syahrul Ridhwan, Abdullah (2011) Optimization of glycerol recovery on effect of waste volume and ph using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Yusof, Taib and S. F., Ismail and M., Ishak (2011) Sustainable Analysis of Lightweight Lift System Design for Disable People Using Finite Element. In: International Conference on Robotics Automation System (ICORAS 2011), 23-24 May 2011 , ITC, Kemaman Terengganu. . (Unpublished)

Mohd Zuki, Salleh and Roslinda, Nazar and Pop, Loan (2011) Numerical Solutions of Free Convection Boundary Layer Flow on a Solid Sphere With Newtonian Heating in a Micropolar Fluid. Meccanica . ISSN 0025-6455 (In Press)

Mohd. Ghani, Awang and Suriya Kumar, Sinnadurai (2011) The Development of Study Skill Tools in Evaluating Student's Study Orientation Skills and Its Relationship towards Academic Performance. Journal of Language Teaching and Research, 2 (2). pp. 314-322. ISSN 1798-4769

Mokhtar, Abdullah and Ab Hamid, M. R. and Zainol, Mustafa and Nur Riza, Mohd Suradi and Fazli, Idris and Choong, Yeun Liong and Wan Rosmanira, Ismail and Faridatulazna, A. Shahabuddin (2011) Value-Based Total Performance Excellence Measurement (Vbtpem): An Overview of Agenda and Transformation. Journal of Quality Measurement and Analysis , 7 (1). pp. 67-75.

Muhamad Fikri, Abd Rahman (2011) Design, analysis and fabricate solar car chasis and body (race type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad 'Afif, Mohamed Azmi (2011) Design and fabrication of ventilated cat litter box. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Muhammad 'Ammar Shakir, Ishar (2011) Study characteristic of oil-water emulsion fuel for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad @ S A Khushren, Sulaiman and Ahmed, El-Shafie and Othman, Karim and Hassan, Basri (2011) Improved Water Level Forecasting Performance by Using Optimal Steepness Coefficients in an Artificial Neural Network. Water Resources Management, 25 (10). pp. 2525-2541. ISSN 0920-4741 (print); 1573-1650 (online)

Muhammad @ S A Khushren, Sulaiman and Ahmed, El-Shafie and Othman, Karim and Hassan, Basri (2011) Real-Time Food Forecasting by Employing Artificial Neural Network based Model with Zoning Matching Approach. Hydrology and Earth System Sciences, 8 . pp. 9357-9393. ISSN 1027-5606

Muhammad Azam, Ismail (2011) Design and development of coconut palm collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Jahiduddin, Abu Jamal (2011) Performance of lightweight foamed concrete using palm oil clinker crushed (POCC) as sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Kamili, Zahidi (2011) Design and fabrication of hole cover by casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Khairi, Ghazali (2011) A study of pipe leak source location using single channel accoustic emission system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ridzuan, Kamaruzaman (2011) Isolation of microorganism from oil palm-sap. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Muhammad Safwan, Ismail (2011) Experimental study of formability of sheet metal in deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saiful, Mustafa (2011) Turbulent flame speed in spark ignition engine combustion process using computational fluid dynamics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saiful Azzam, Hamdan (2011) Investigation microstructure and mechanical properties of white cast iron using sand casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shahmi , Mat Saat (2011) A study on domestic subcontractor in Kota Bharu : critical analysis of construction management in handling local project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Syafiq, Johari (2011) Managing registration of new student intake using online registration new student intake system (ORNSIS) integrated barcode technology. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammad Zulfaris, Mohd Salleh (2011) Saba' islamic portal system (Book online ordering system). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Muhammed Raniza, Ramli (2011) Would I ever use a Mac computer? Bit@FSKKP . p. 20. ISSN 1985-7969 (Unpublished)

Muhasshim, Arishah and Mohammad Isa, Mohd Ikmar and Sabri, Norhazmin and Saifful Kamaluddin, Muzakir@Lokman (2011) Optical and mechanical properties of lyotropic liquid crystal using triton X-100, aerosil 200, and tapioca starch. Jabatan Sains Fizik, Universiti Malaysia Terengganu.

Muhd Fazreel, Muhammad Rosli (2011) Development of ternary phase diagram: optical and mechanical characterization of water/tapioca starch/triton x-100 liquid crystal. Jabatan Sains Fizik, Universiti Malaysia Terengganu.

Munira, Abdul Aziz (2011) Performance of commercial scale removers in removing calcium carbonate (CaCO3) rich scales. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Muzamir, Hasan and Aminaton, Marto and Hyodo, Masayaki and Ahmad Mahir, Makhtar (2011) The Strength of Very Soft Clay Reinforced with Singular Bottom Ash Column. In: Proceedings of the International Conference on Advances in Geotechnical Engineering (ICAGE2011), 7-9 November 2011 , Perth, Australia. pp. 1-6.. ISBN 978-0-646-55142-5

Muzamir, Hasan and Aminaton, Marto and Hyodo, Masayuki and Ahmad Mahir, Makhtar (2011) The Strength of Soft Clay Reinforced with Singular and Group Bottom Ash Column. The Electronic Journal of Geotechnical Engineering (EJGE), 16 . pp. 1215-1227. ISSN 1089-3032

N

N., Zainol (2011) Screening of Factors Affecting Biological Delignification Process of Oil Palm Trunk Using Local Oyster Mushroom (Pleurotus Ostretus). International Journal of Chemical and Environmental Engineering , 2 (4). ISSN 20780737

Nabila, Sharudin (2011) ATM application using Mykad (APMY). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nadia Eliza Natrah, Jamaluddin (2011) 45 pelajar jelajah masyarakat pribumi. CREATE . p. 60. ISSN 1823-7487

Nagantheram, Sigithasan (2011) Design and fabrication of smart rack gadget. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Najihah, Yaakob (2011) e-Vehicle booking system at UMP. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nallappan, Madana Leela (2011) Development of virgin polypropylene composite by sugarcane bagasse reinforcement. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nasly, Mohamed Ali and Abu Azam, Md Yassin and Norhaiza, Nordin and Khairunisa, Muthusamy (2011) Sustainable Housing Using An Innovative Mortarless Interlocking Blockwork System – The Effect Of Palm Oil Fly Ash (Pofa) As An Aggregate Replacement. In: International Building & Infrastructure Technology Conference 2011, 7-8 Jun 2011 , Penang, Malaysia. pp. 73-81..

Nasly, Mohamed Ali and Nima, Amani and Roslida, Abdul Samat (2011) Developing a Framework of Economic Model for Building Component Lifecycle Repair. Advanced Materials Research, 255-26 . pp. 3893-3897. ISSN 1022-6680

Nasrul Hadi, Johari (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia .

Nasrullah, Mohd Zulkiflee and Mimi Sakinah, A. M. and Abdul Syukor, Abd Razak and Anwar, Ahmad and Zahrizan, Zakaria and Zularisam, A. W. and Ideris, Zakaria (2011) Hydrogen as the Future Sustainable Energy – A Review. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 47-57. ISSN 2180-2742

Nazikussabah, Zaharudin and Muhamad, Amin and Farahanim, Misni (2011) Determination of Heavy Metals in Water and Sediment from Pahang River, Pahang, Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011 , Batu Pahat, Johor. pp. 1-8.. (Unpublished)

Nazikussabah, Zaharudin and Nurhazwani, Musa and Farahanim, Misni and Siti Maznah, Kabeb (2011) Determination of Vitamin C and Mineral from Spinach (Amaranthus Viridis) Chips for Nutrient Facts. In: International Health Conference IIUM 2011, 7-8 December 2011 , Kuantan, Pahang, Malaysia. pp. 1-4..

Nik Ahmad Fairuz, Nik Adlan (2011) Development hydrogen gas generator for duel fuel engine using capacitor water fuel cell method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Aloesnita, Nik Mohd Alwi (2011) Exploring Language Learning Tasks in Synchronous Computer-mediated Communication (SCMC). In: 46th RELC International Seminar, 18 - 20 April 2011 , Singapore. pp. 1-17.. (Unpublished)

Noor Hidayah , Sukardi (2011) Electrochemical study of graphene-ionic liquid composites. Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang.

Noor Intan Shafinas, Muhammad (2011) Computational fluid dynamics of industrial scale spray dryer. Masters thesis, Universiti Malaysia Pahang.

Noor Suraya, Romali and Nadiah, Mokhtar (2011) Application of Biofilter System for Domestic Wastewater Treatment. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 13-18. ISSN 2180-2742

Noor Syahidah, Sabran (2011) Atribut graduan dan ekspetasi industri – perspektif untuk jurutera awam. CREATE (12). ISSN 1823-7487

Noorshafiza, Muhaidi (2011) Vigilance home security system (VHS System). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Amizam, Jusoh (2011) Segmentation and recognition of Malaysian car plates using Freeman chain codes. Masters thesis, Universiti Malaysia Pahang.

Nor Atikah, Mat Yusoff (2011) Comparison of supercritical fluid extraction and hydrodistillation method for determination of agarwood essential oil. Faculty of Industrial Sciences And Tecnology, Universiti Malaysia Pahang.

Nor Haslizah, Ramli (2011) Book drop RFID in UMP library. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Ilia Anisa, Aris (2011) Demulsification of water-in- oil (W/O) emulsion by microwave heating technology. Masters thesis, Universiti Malaysia Pahang .

Nor Izzatiey, Mohammad Usolli (2011) The effect of adsorbent additive on clay based adsorbent to the removal of multidye system. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Khonisah, Daud and B. H., Hameed and Nurul Sa'aadah, Sulaiman (2011) Fenton-like oxidation of reactive black 5 solution using Fe-rice husk ash catalyst. In: UNSPECIFIED . . (Unpublished)

Nor Maniha, Abdul Ghani and Raja Mohd Taufika , Raja Ismail and Nurul Hazlina , Noordin and Mohd Ashraf, Ahmad (2011) Trajectory tracking control of two wheels mobile robot = trajektori kawalan penjejakan sistem robot dua tayar. Other thesis, Universiti Malaysia Pahang.

Nor Sabrina, Ismail (2011) Post Graduates Week 2011 – pendedahan untuk melanjutkan pengajian ke peringkat pengajian siswazah. CREATE (18). ISSN 1823-7487

Nor'aqilah, Misman (2011) RFID application system in checking patient. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nora'asheera, Mohd Nazif (2011) Composites from polypropylene (PP) reinforced with oil palm empty fruit bunch (OPENFB) fibre. Faculty of Chemical and Natural Resources Engineering , University Malaysia Pahang.

Noraini, Mohd Razali and Geraghty, John (2011) Biologically Inspired Genetic Algorithm to Minimize Idle Time of the Assembly Line Balancing. In: 2011 Third World Congress on Nature and Biologically Inspired Computing (NaBIC), 19-21 October 2011 , Salamanca, Spain. pp. 105-110..

Noraini, Mohd Razali and Geraghty, John (2011) Genetic Algorithm Performance with Different Selection Strategies in Solving TSP. In: The 2011 International Conference of Computational Intelligence and Intelligent Systems, 6-8 July, 2011 , Imperial College, London. .

Norasiha, Hamid (2011) Inclusion complex formation between natural dye extracted from pitaya fruit skin and β-cyclodextrin : kinetic and thermodynamic study. Masters thesis, UNIVERSITI MALAYSIA PAHANG .

Noraziah, Ahmad and Noriyani, Mohd Zin and A. N., Abdalla and Norazaliza, Mohd Jamil (2011) Minimize Network Congestions in Single-Row Networks. Scientific Research and Essays, 6 (11). pp. 2372-2378. ISSN 1992-2248

Norazila, Jaalam and Ahmed Mohamed, Ahmed Haidar and Noor Lina, Ramli and Nor Laili, Ismail (2011) A neuro-fuzzy approach for stator resistance estimation of induction motor = pendekatan neuro-fuzzy untuk meramal rintangan stator pada motor induksi. Other thesis, Universiti Malaysia Pahang.

Norazura , Ismail (2011) Risk management of neurobehavioral health of tyre manufacturing industry workers exposed to naphtha. PhD thesis, Universiti Putra Malaysia.

Norhaiza, Nordin and Wan Hamidon, Wan Badaruzzaman and Nasly, Mohamed Ali and Wan Mansor, Wan Muhamad and Khairunisa, Muthusamy (2011) Bending Behavior of Semi-Continuous Prefabricated Profiled Steel Sheeting (PSSDB) Floor Panels. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 1-5. ISSN 2180-2742

Norhaiza, Nordin and Wan Hamidon, Wan Badaruzzaman and Nasly, Mohamed Ali and Wan Mansor, Wan Muhammad and Khairunisa, Muthusamy (2011) Bending Behaviour of Semi Continuous Prefabricated Profiled Steel Sheeting Dry Board (PSSDB) Floor Panels. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 1-6. ISSN 2180-2742

Norizam, Sulaiman and Mohd Nasir, Taib and Sahrim, Lias and Zunairah, Murat and Siti Armiza, Mohd Aris and Noor Hayatee, Abdul Hamid (2011) Novel Methods for Stress Features Identification using EEG Signals. International Journal of Simulation: Systems, Science & Technology (IJSSST), 12 (1). pp. 27-33. ISSN 1473-8031 (print); 1473-804x (online)

Norrihan, Sulan (2011) A corpus-based study of morphological productivity of English language chemical engineering textbooks. PhD thesis, Universiti Teknologi Mara.

Norshahida, Rahman (2011) Feasibility study of LNG pre � cooling system using carbon Dioxide as a refrigerant. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norsuhada, Khosni (2011) UMP announcement system via GSM. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Norsuhada, Khosni (2011) UMP announcement system via GSM. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Norul Fadilah, Abdullah (2011) 6 program kejuruteraan melalui proses akreditasi. CREATE (13). ISSN 1823-7487

Nur Asilah, Che Aziz (2011) Mechanical performance of kenaf fibre reinforced thermoplastic composite. Faculty of Chemical Engineering and Natural Resources, University Malaysia Pahang.

Nur Faezah, Omar (2011) Thalassaemia detection using CBR Algorithm via mobile device. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Hanis, Ihsan (2011) Restaurant ordering system using mobile application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Hayati, Zulkefli (2011) Preparation and characterization of cobalt based and zinc promoted catalyst fro fisher tropsch synthesis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Iedayu , Mohd Jusoh (2011) Creative Product Development From Recycle Wood Waste. In: International Management Conference 2011(ImaC2011) , 16-17 April 2011 , Taman Tamadun Islam, Kuala Terengganu, Terengganu. pp. 1-10.. (Unpublished)

Nur Shazwani, Md. Akhir (2011) Mangifera Indica L. diagnostic system (MILDS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Syafiqah, Mohd Nawawi (2011) Study on spray nozzle of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Syazanna, Jamaludin (2011) Drug tendency detection system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nur Syazwani, Ghazali (2011) Extraction of Pandanus Amaryllifolius essential oil from pandan leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Syuhada, Omar (2011) Removal of heavy metal in medical institutional wastewater using ultrasonic assisted various leaching solution. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurhidayah, Muhamad Zahari (2011) Course grade calculation using fuzzy logic (CGCFL). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurrina, Rosli (2011) Measurement of liquid film flow on inclined wall using photochromic dye marking method. Masters thesis, Gunma University.

Nurrina, Rosli and Toyooka, Youichi and Amagai, Kenji (2011) Velocity and Vorticity Measurement in Flow Field Using Laser Tagging Method by Photochromic Dye. Journal of JSEM, 11 (S. I.). ss147-ss152. ISSN 1346-4930

Nursyazwa, Sadri (2011) E-thesis management system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Farrah Dina, Abd Wahid (2011) Simulation modeling of students' registration at MINDS. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Hazlina, Noordin and Arslan, Tughrul and Erdogan, Ahmet T. and El-Rayis, Ahmed O. and Haridas, Nakul and Flynn, Brian (2011) Triangular Lattices for Mutual Coupling Reduction in Patch Antenna Arrays. In: Loughborough Antennas & Propagation Conference (LAPC 2011), 14-15 November 2011 , Loughborough, UK. pp. 1-4..

Nurul Hazlina, Noordin and Arslan, Tughrul and Erdogan, Ahmet T. and Zuniga, Virgilio and El-Rayis, Ahmed O. and Haridas, Nakul (2011) Uniform Circular Arrays for Phased Array Antenna. In: Loughborough Antennas & Propagation Conference (LAPC 2011), 14-15 November 2011 , Loughborough, UK. pp. 1-4..

Nurul Jannah, Firdaus Ahmad Kamil (2011) Development of MS ISO 9001:2008 management system for automotive excellence center. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Nurul Nadia, Mat Jalaluddin (2011) Book inventory system using RFID. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Nadia Ummira, Abu Bakar (2011) Isolation of microorganism from oil palm sap. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Nazihah, Hawari and Razman, Mat Tahar (2011) Some Issues in the Strategic University Management. In: 19th Triennal Conference of the International Federation of Operationals Research Societies, 10-15 July 2011 , Melbourne Convention and Exhibition Center, Melbourne. pp. 1-5..

Nurul Rasheedah Fateen, Ramli (2011) Orthopedic information management system (OIMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Rasheedah Fateen, Ramli (2011) Orthopedic information management system (OIMS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

P

Paveswari, Sithambaranathan (2011) Production of plastic from marine algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Pejabat, Naib Canselor UMP (2011) Teks Ucapan Profesor Dato' Dr. Daing Nasir Ibrahim Naib Canselor Universiti Malaysia Pahang. In: Majlis Amanat Naib Canselor 2011, Dewan Kompleks Sukan, Universiti Malaysia Pahang, 25 Januari 2011. (Unpublished)

Phoo , Ken Seng (2011) Proposal to improve parking facilities along Jalan Tun Ismail. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Phuan, Lisa Ann Hui Jing (2011) NETCAP (A Network traffic monitoring sniffer). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ponnusamy, Barath (2011) Magnet device to reduce diesel consumption in diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Prakash, Gunah (2011) Optimization of xylose production from sugarcane bagasse using response surface methodology (RSM). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Priscilla Serimah, Bundan (2011) The assessment of material application through timber traditional Malay house construction. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

R

Raja Mohd Taufika, Raja Ismail and Mohd Anwar, Zawawi and Mohd Syakirin, Ramli (2011) Dynamic Modelling of a Double‐Pendulum Gantry Crane System Incorporating Payload. In: AIP Conference Proceedings: The 4th Global Conference On Power Control And Optimization, 02-04 December 2010 , Damai Puri, Kuching, Sarawak. pp. 118-122., 1337 (1). ISSN 0094-243X ISBN 978-0-7354-0893-7

Rajan, Jose and P. S., Archana and A., Le Viet and E., Naveen Kumar and M. M., Yusoff and S., Ramakrishna (2011) Tailoring Electron Diffusion thriugh Metal Oxide Nanostructures for Dye-sensitized Solar Cells. In: Tech Connect World 2011 Summit, Conference & Expo, 13-16 June 2011 , Hynes Convention Center, Boston, Massachusetts, USA. pp. 775-778..

Ramli, Junid and Y., Nor Imrah and A. R., Jeeferie and Mohamad Mazwan, Mahat (2011) A Study on the Potential of Cost and Energy - A Survey at Playford Building, University of South Australia. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 25-36. ISSN 2289-4659 (print); 2231-8380 (online)

Ramli , Junid (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vinyl Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (3). pp. 74-79.

Rao, G. Srinivasa and K. V., Sharma and Chary, S. P. and R. A., Bakar and M. M., Rahman and K., Kadirgama and M. M., Noor (2011) Experimental Study on Heat Transfer Coefficient and Friction Factor of Al2O3 Nanofluid in a Packed Bed Column. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 1-15. ISSN 2289-4659 (print); 2231-8380 (online)

Rasyiqah Ilmi , Abd Rahim (2011) Malam puisi Riong buka tirai di UMP. Berita Harian .

Razlinda , Abd Razak (2011) The usage of watermarking to store patient information and diagnosis in medical images. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Razman, Mat Tahar (2011) Evaluating Capacity Of Palm Oil Mill Using Simulation Towards Effective Supply Chain - A Case Study. In: International Conference Management , 13-14 June 2011 , Hydro Hotel, Penang. . (Unpublished)

Razman, Mat Tahar and Fazeeda, Mohamad and Norhanom, Awang (2011) Reducing Disturbance in Manufacturing System with Discrete-event Simulation. In: International Management Conference 2011, 16-17 April 2011 , Taman Tamadun Islam, Kuala Terengganu. . (Unpublished)

Reddy, K. Srinivasa and Murty, G.V. Ramana and Sharma, Korada Viswanatha (2011) Aerodynamic Studies in the Static Components of a Centrifugal Compressor Stage. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 75-86. ISSN 2289-4659 (print); 2231-8380 (online)

Riaz , Ul Haq (2011) Design and simulation of variants of koch models for fractal antenna. Masters thesis, Universiti Malaysia Pahang.

Rohaya, Rasmin (2011) Comparison between sieve analysis & hydrometer with laser particle analyzer to determine particle size distribution. Faculty of Civil & Environmental Engineering, UNIVERSITI MALAYSIA PAHANG.

Rosfarahin, Roslan (2011) Iqra' learning courseware. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Roshamimi , Faisal (2011) Kajian terhadap hubungan ciri-ciri inovator pengurusan dengan keinovatifan individu di Politeknik Kementerian. PhD thesis, Universiti Malaysia Pahang.

Rosilavi, Mat Jusoh (2011) Perkongsian pintar UMP-KMPh pemangkin jaringan kerjasama. CREATE (25). ISSN 1823-7487

Roslan , Khamis (2011) Kaji tingkat pengurusan air di empangan. Berita Harian .

Roslina, Omar and Mohd Khairul Ikhwan, Abd Raof and Nor Ashikin, Muhamad Khairussaleh and Ezahtul Shahreen, Ab Wahab (2011) Mechanical Properties of Concrete with Recycled Aggregate. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 33-37. ISSN 2180-2742

Rosniza, Mohd Taha (2011) Inovasi terbaru rawat air kumbahan. Berita Harian .

Rosniza, Mohd Taha (2011) Mahasiswi dominasi MPP UMP 2011/2012. Berita Harian .

Rozlina, Mohamed (2011) Comparison of query caching approaches in P2P networks. Bit@FSKKP . pp. 24-25. ISSN 1985-7969 (Unpublished)

S

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun (2011) Designing Pulse Laser Surface Modification of H13 Steel Using Response Surface Method. International Conference On Advances In Materials And Processing Technologies (AMPT2010): AIP Conference Proceedings, 1315 . pp. 1371-1376.

S. N., Aqida and Naher, Sumsun and Brabazon, Dermot (2011) Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes. 14th International ESAFORM Conference on Material Forming: AIP Conference Proceedings, 1353 . pp. 1081-1086.

Sabira, Khatun (2011) 3d experimental detection and discrimina-tion of malignant and benign breast tumor using nn-based uwb imaging system. Progress In Electromagnetics Research (PIER), 116 . pp. 221-237. ISSN ISSN: 1070-4698, E-ISSN: 1559-8985

Sabira, Khatun (2011) Experimental Breast Tumor Detection Using Nn-Based Uwb Imaging. Progress In Electromagnetics Research (PIER), 111 . pp. 447-465. ISSN ISSN: 1070-4698, E-ISSN: 1559-8985

Saifful Kamaluddin, Muzakir@Lokman (2011) Answer Scheme. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-9. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman (2011) Chapter 13: Heat. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 251-266. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman (2011) Chapter 14: Kinetic Theory of Gases. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 267-284. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman (2011) Chapter 25: Quantization of Light. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., pp. 1-12. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman (2011) Chapter 26: Wave Properties of Particle. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-10. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman (2011) Chapter 27: Bohr’s Model of Hydrogen Atom. In: Physics College Matriculation Semester 2. SAP Publications Sdn. Bhd., Malaysia, pp. 1-13. ISBN 9789673211630

Saifful Kamaluddin, Muzakir@Lokman and Shahidan, Radiman (2011) Kesan Masa Pengeraman Nanozarah Zink Oksida yang Dihasilkan Menggunakan Afrons Gas Koloid = Incubation Effect on Zinc Oxide Nanoparticles Produced Using Colloidal Gas Aphrons. Sains Malaysiana, 40 (5). pp. 503-509. ISSN 0126-6039

Saifful Kamaluddin, Muzakir@Lokman and Zainal Abidin, Sulaiman and Siti Hendon, Sheikh Abdullah and Halimah, Mohamed Kamari and Zalita, Zainuddin (2011) Chapter 15: Thermodynamics. In: Physics College Matriculation Semester 1. SAP Publications Sdn. Bhd., Malaysia, pp. 285-298. ISBN 9789673211630

Saiful Riza, Zainul Abidin (2011) Efficiency improvement of LDO ouput based linear regulator with supercapacitor energy recovery - a versatile new technique with an example of a 5v to 1.5 v version. Masters thesis, The University of Waikato .

Sanggie, Florence Wednna (2011) Process modeling and comparison study of acid gas removal unit by using different aqueous amines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2011) Designing of Flexible Multi-Microcontroller Based Training System. Procedia Engineering . ISSN 1877-7058 (Unpublished)

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2011) Framework of Designing Multiple Microcontroller Based Applications. In: United Kingdom – Malaysia – Ireland Engineering Science Conferences (UMIES 2011), 12 July 2011 , Kuala Lumpur. pp. 181-188..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2011) Learning Embedded Systems with Multi-Microcontroller Evaluation Tool. In: International Conference on Electrical, Control and Computer Engineering 2011 (InECCE 2011). , 21-22 June 2011 , Hyatt Regency, Kuantan, Pahang, Malaysia. pp. 288-292..

Sembiring, Rahmat Widia and Jasni, Mohamad Zain and Abdullah, Embong (2011) Alternative Model for Extracting Multidimensional Data Based-on Comparative Dimension Reduction. In: The Second International Conference on Software Engineering and Computer System (ICSECS) 2011, June, 27-29, 2011 , Universiti Malaysia Pahang. . (Submitted)

Semin, Semin (2011) Development of new injector for compressed natural gas engine and the effect on performance. PhD thesis, Universiti Malaysia Pahang.

Shafiqah, Sholehuddin (2011) Independent learning of Quran (ILoQ)- alphabet using speech recognition. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Shahrul Afandi, Shaharudin (2011) Web based application of internship logbook for practical. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Sharifah Zureehan, Syed Othman (2011) An experimental study on LPG/H2O2 mixture for combustion. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharma, Korada Viswanatha and B., Vijaya Lakshmi and T., Subrahmanyam and V., Dharma Rao (2011) Turbulent Film Condensation of Pure Vapors Flowing Normal to a Horizontal Condenser Tube - Constant Heat Flux at the Tube Wall. International Journal of Automotive and Mechanical Engineering (IJAME), 4 (Jul . pp. 455-470. ISSN 1985-9325(Print); 2180-1606 (Online)

Sharma, Korada Viswanatha and L. Syam, Sundar (2011) Laminar Convective Heat Transfer And Friction Factor Of AL2O3 Nanofluid In Circular Tube Fitted With Twisted Tape Inserts. International Journal of Automotive and Mechanical Engineering (IJAME), 3 (Jan-Ju). pp. 265-278. ISSN 1985-9325(Print); 2180-1606 (Online)

Shuhaniza, Said (2011) Gerai Berita Harian kena serbu. Berita Harian .

Siddique, Md. Nurul Islam and Ideris, Zakaria and Zularisam, A. W. (2011) Bio-filtration Performance of Petrochemical Wastewater using Continuous Stirred Tank Reactor. International Journal of Civil Engineering and Geo-Environmental, 4 . pp. 35-39. ISSN 2180-2742(Print); 2504-849X(Online)

Siddique, Md. Nurul Islam and Zularisam, A. W. and Ideris, Zakaria and Mimi Sakinah, A. M. (2011) Temperature and Organic Loading Rate Influence on Biomethanation of Petrochemical Wastewater using CSTR. International Journal of Civil Engineering and Geo-Environmental, 2 (1). pp. 59-64. ISSN 2180-2742

Sita Fitriana, (2011) Efficient direct regeneration of true-to-type Pogostemon cablin benth from leaf explant and profile of essential oils. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti A'isyah, Sukaini (2011) Generasi waja. Harian Metro .

Siti Aishah, Md Hassan and Ahmad, Othman (2011) Development Of Absorption Capability Attributes For Technology Transfer Performance: A Pilot Study In National Automotive Industry. In: International Management Conference (IMaC) 2011, 16 – 17 April 2011 , Taman Tamadun Islam, Kuala Terengganu, Terengganu. pp. 1-20.. (Unpublished)

Siti Fatimah, Che Osmi and Nadiah, Mokhtar and Noor Suraya, Romali and Siti Khadijah, Che Osmi (2011) Enhanced the Municipal Solid Waste Management in Kuala Lumpur by Implementing Technologies from European Countries: Strategies and Action Plans. International Journal of Civil Engineering and Geo-Environmental, 4 . pp. 23-34. ISSN 2180-2742(Print); 2504-849X(Online)

Siti Hajar, Ab Rahman (2011) Protein yeast classification information system. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siti Hanisah, Majid (2011) Hypermedia cat encyclopedia for children. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Siti Khadijah, Che Osmi and Siti Fatimah, Che Osmi and Ezahtul Shahreen, Abdul Wahab (2011) Potential Mobility of Heavy Metal in Soil Using Electrochemical Method. International Journal of Civil Engineering and Geo-Environmental, 2 . pp. 39-46. ISSN 2180-2742

Siti Nor Fazruaini, Rusli (2011) Extraction and characterization of Malaysia pandan leaves by soxhlet method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Norizat, Shikh Abdul Jalil (2011) UMP terima pencapaian 5 bintang. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2011) UMP, Hebei bekerjasama. Utusan Malaysia .

Siti Nur Sakinah, Jamaludin (2011) Development of regenerative piezoelectric linear generator for alternative power generation. Masters thesis, Universiti Malaysia Pahang.

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Astuty, Amrin and Saliza Azlina, Osman (2011) Effect of Surface Finish on Intermetallic Compound Formation During Soldering With Ni-Doped Solders. ECS Journal of Solid State Science and Technology, 19 . pp. 319-329. ISSN 0128-7389

Siti Rabiatull Aisha, Idris and Ali, Ourdjini and Saliza Azlina, Osman (2011) Effect of Multiple Reflow on Intermetallic Compound Formation using Various Surface Finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410 (print); 1741-8429 (online)

Siti Sofiah, Mohd Radzi and Kamarul Hawari, Ghazali and Nazriyah, Che Zan and Faradila, Naim (2011) Using Bimodal Gaussian Mixture Model-Based Algorithm for Background Segmentation in Thermal Fever Mass Screening. In: 2nd World Conference on Information Technology, 24-28 November 2011 , Antalya, Turkey. .

Siti Umairah , Mokhtar (2011) Application of dispersive liquid-liquid microextraction based on solidification of floating organic droplet in the analysis of anti-depressant drugs. Masters thesis, Universiti Teknologi Malaysia .

Siti Zahirah, Zulkapri (2011) Production of biofertilizer from vermicomposting process of municipal sludge. Faculty of Civil & Environmental Engineering, Universiti Malaysia Pahang.

Soffia, Suliman (2011) Expediency heuristic in travel agency webpage. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Solly, Aryza (2011) Speed estimation techniques for induction motor using digital signal processing. Masters thesis, Universiti Malaysia Pahang.

Soon, Brendon Ghim Eng (2011) The analysis on the performances of signalised intersection at Taman Tas. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Sri Murni, Astuti (2011) Optimization process of binahong extraction and characterization study. Masters thesis, Universiti Malaysia Pahang.

Suriyana, Wagiman (2011) Parking efficiency study for Kuantan Parade, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Suryanarayana, K. V. and Rao, G. Srinivasa and Prasad, D. M. R. and Sharma, K. V. and Sarma, P. K. (2011) Experimental Analysis of Heat and Mass Transfer in a Packed Bed. Journal of Mechanical Engineering and Sciences (JMES) , 1 . pp. 124-132. ISSN 2289-4659 (print); 2231-8380 (online)

Suziyana, Mat Dahan and Nurhaizan , Mohd Zainudin and Lee, Chia Kuang and Mohd Yusof, Taib (2011) Innovation Process: A Review of Existing Models and Development of an Alternative Model. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 August 2011 , Johor, Malaysia. pp. 1-9..

Syed Ahmad Farhan , Syed Ab Mutalib (2011) Modeling of single mixed refrigerant process for offshore natural gas liquefaction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Syurahbil, A (2011) Network instrusion prevention system ( NIPS) based on network intrusion detection system (NIDS) and ID3 algorithm. Masters thesis, Universiti Malaysia Pahang.

T

T. A., Majid and S. S., Zaini and Noram Irwan, Ramli (2011) Collapse Analysis of Car Porch Steel Structure due Wind Storm. International Journal of Civil Engineering and Geo-Environmental . ISSN 2180-2742

Tahseen, Tahseen Ahmad and M., Ishak and M. M., Rahman (2011) A Numerical Study of Forced Convection Heat Transfer for Staggered Tube Banks in Cross-Flow. In: 1st International Conference on Mechanical Engineering Research, 5-7 Disember 2011 , Kuantan, Pahang Darul Makmur. pp. 216-227..

Tan, Choon Mong (2011) Design and fabrication of multipurpose table kid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tan, Khai Shuen (2011) Photo capturing using colorimage processing (PCCIP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Tay, Chze Huat (2011) Housing loan evaluation system using regression analysis. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Teng, Boon Wun (2011) Design and fabricate the new generation of working table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thaomadaran, Ghunavathy (2011) Composite of the recycled polypropylene reinforced with oil palm empty fruit bunch. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Thelehaswary, Appalasamy (2011) Real-time facial expression recognition system (FERS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Thet, Thet Mon (2011) Performance of Cryogenic Machining with Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials, 52 (54). pp. 2003-2008. ISSN 1662-7482

Triantoro, Safaria (2011) The investigation of Relationship Between Leadership Practices, Role Stressor, Religious Coping and Job Insecurity With Job Stress Among University Academician In Pahang And Jogyakarta. PhD thesis, Universiti Malaysia Pahang.

Tuan Zairani, Tuan Ab. Rahman (2011) Kunjungan muhibah BKSS ke UMK. CREATE (47). ISSN 1823-7487

Tuan Zairani , Tuan Ab. Rahman (2011) PTMK beraksi hebat di Boling Antara Jabatan. CREATE (49). ISSN 1823-7487

U

UMP, . (2011) 1,000 kakitangan meriahkan hari keluarga UMP. Utusan Malaysia .

UMP, . (2011) 1,000 peminat sepak takraw banjiri UMP. CREATE (50). ISSN 1823-7487

UMP, . (2011) 1,000 pengunjung tingkat kesedaran pendermaan organ. CREATE . p. 40. ISSN 1823-7487

UMP, . (2011) 1,000 staf hayati semangat kemerdekaan. CREATE (37). ISSN 1823-7487

UMP, . (2011) 1,000 warga UMP sambut Maulidur Rasul dan ulang tahun ke-9 penubuhan UMP. CREATE (30). ISSN 1823-7487

UMP, . (2011) 110 pelajar UMP dan sekolah berbasikal 324 km temui PM. CREATE (6). ISSN 1823-7487

UMP, . (2011) 130 atlet UMP beraksi di Kejohanan SUKUM ke-36. CREATE (51). ISSN 1823-7487

UMP, . (2011) 150 pemimpin pelajar berkampung tingkat jati diri. CREATE (44). ISSN 1823-7487

UMP, . (2011) 160 murid sertai motivasi. Harian Metro .

UMP, . (2011) 17 pelajar sertai UMP Star 11. Utusan Malaysia .

UMP, . (2011) 1UMP 1Media 1Strike erat hubungan dengan media. CREATE (48). ISSN 1823-7487

UMP, . (2011) 2,514 pelajar baharu sambung pengajian Ijazah Sarjana Muda. CREATE . p. 20. ISSN 1823-7487

UMP, . (2011) 30 delegasi BAKORMA lawat UMP. CREATE (17). ISSN 1823-7487

UMP, . (2011) 33 PALAPES laut berkayak ke Pulau Kapas. CREATE (47). ISSN 1823-7487

UMP, . (2011) 38,000 pengunjung serbu Jom Masuk U di Kuantan. CREATE (13). ISSN 1823-7487

UMP, . (2011) 38,000 serbu karnival jom masuk u. Utusan Malaysia .

UMP, . (2011) 4 pelajar UMP menang pingat emas di IEYI. Utusan Malaysia .

UMP, . (2011) 4 universiti teknikal perlu tingkat pengambilan. Utusan Malaysia .

UMP, . (2011) 43 pelajar jadi anak angkat peneroka. Utusan Malaysia .

UMP, . (2011) 5,000 warga UMP sambut Hari Raya Aidilfitri. CREATE . p. 38. ISSN 1823-7487

UMP, . (2011) 502 pelajar baharu daftar pengajian diploma. CREATE (10). ISSN 1823-7487

UMP, . (2011) 502 pelajar baru ikuti program diploma mendaftar di UMP. Utusan Malaysia .

UMP, . (2011) 55 kayuh basikal ke Putrajaya. Harian Metro .

UMP, . (2011) 60 pelajar antarabangsa berkampung di Cherok Paloh. CREATE (42). ISSN 1823-7487

UMP, . (2011) 61 pelajar FKP sertai Program Apprentis MAI. CREATE (32). ISSN 1823-7487

UMP, . (2011) 700 alumni dirai hargai sumbangan. CREATE . p. 53. ISSN 1823-7487

UMP, . (2011) 8 IPT sertai Ekspedisi Kayak Amal Pesisir Pantai UMP 2011. CREATE (46). ISSN 1823-7487

UMP, . (2011) 800 pelajar pupuk semangat jati diri. CREATE (45). ISSN 1823-7487

UMP, . (2011) APUCEN eratkan hubungan masyarakat kampus dengan komuniti luar. CREATE (38). ISSN 1823-7487

UMP, . (2011) Ahmad Saifuddin, Ayesha dinobat olahragawan, olahragawati terbaik 2010. CREATE (49). ISSN 1823-7487

UMP, . (2011) Aktiviti kesukarelawanan agenda perdana MPP. CREATE (36). ISSN 1823-7487

UMP, . (2011) Alumni perlu berganding bahu demi kecemerlangan UMP. CREATE (18). ISSN 1823-7487

UMP, . (2011) Artis, penyair hangatkan malam puisi riong di Gambang. Berita Harian .

UMP, . (2011) Ayah, ibu dan anak berkongsi pentas konvokesyen. CREATE . p. 14. ISSN 1823-7487

UMP, . (2011) Berkayak ke Pulau Kapas. Utusan Malaysia .

UMP, . (2011) Boling eratkan hubungan UMP-media. Utusan Malaysia .

UMP, . (2011) CENFED, AKEPT anjur Kursus Pembangunan Transformasi Pensyarah Muda. CREATE . p. 51. ISSN 1823-7487

UMP, . (2011) CITRex pupuk budaya penyelidikan UMP. CREATE (17). ISSN 1823-7487

UMP, . (2011) Canselor tinjau pembangunan UMP Pekan. CREATE . pp. 4-5. ISSN 1823-7487

UMP, . (2011) Dr Daing Nasir kekal terajui UMP. Harian Metro .

UMP, . (2011) D’Optimis dari Jabatan Pendaftar juara KIK. CREATE . p. 46. ISSN 1823-7487

UMP, . (2011) Emma Sofia menempatkan diri di syarikat gergasi dunia. CREATE (53). ISSN 1823-7487

UMP, . (2011) Etiqa Takaful bantu pelajar UMP. Berita Harian .

UMP, . (2011) Etiqa sumbang RM 70 Ribu bantu pelajar miskin. CREATE (26). ISSN 1823-7487

UMP, . (2011) FKEE juara Kejohanan Sukan Antara Fakulti. CREATE . p. 64. ISSN 1823-7487

UMP, . (2011) FKKSA anjur Persidangan ICCEIB-SOMChe 2011. CREATE . p. 15. ISSN 1823-7487

UMP, . (2011) Gabungan tokoh sastera, ahli akademik, artis meriahkan Malam Puisi Riong BH-UMP. CREATE . pp. 22-23. ISSN 1823-7487

UMP, . (2011) Hari Inovasi suburkan budaya kerja cemerlang. CREATE . p. 36. ISSN 1823-7487

UMP, . (2011) Hari keluarga rapatkan ikatan antara staf. CREATE (33). ISSN 1823-7487

UMP, . (2011) IBM, HeiTech Padu dan UMP tubuh Pusat Kecemerlangan Kampus yang pertama di Malaysia. CREATE (31). ISSN 1823-7487

UMP, . (2011) ICMER bincang isu kejuruteraan mekanikal dan automotif. CREATE . p. 16. ISSN 1823-7487

UMP, . (2011) ICT Business Centre bantu tingkatkan perkongsian dan pengetahuan IT. CREATE (24). ISSN 1823-7487

UMP, . (2011) IN-TEAM bentuk wibawa kepimpinan pengawas SMK Pelabuhan. CREATE (43). ISSN 1823-7487

UMP, . (2011) Ilmu, jati diri bantu martabatkan bahasa. Sinar Harian .

UMP, . (2011) InECCE UMP bincang isu tenaga alternatif. CREATE (16). ISSN 1823-7487

UMP, . (2011) International Seminar on Software Engineering Computer Systems 2011. Bit@FSKKP . p. 14. ISSN 1985-7969

UMP, . (2011) Isteri PM lancar Kempen Kami Prihatin “Apakah dosaku” di UMP. CREATE (6). ISSN 1823-7487

UMP, . (2011) Jawatankuasa penaja alumni FKASA dilancar. CREATE (39). ISSN 1823-7487

UMP, . (2011) Jurutera proses sangat mencabar. CREATE (52). ISSN 1823-7487

UMP, . (2011) Kajian Mohd Rashid dapat pengiktirafan. Harian Metro .

UMP, . (2011) Kami Prihatin jelajah tiga negeri. Utusan Malaysia .

UMP, . (2011) Kampus UMP ubah wajah Kuala Pahang. Utusan Malaysia .

UMP, . (2011) Karnival Ponggal 1 Malaysia semarakkan semangat perpaduan. CREATE (40). ISSN 1823-7487

UMP, . (2011) Karnival jom masuk U di Kuantan sabtu ini. Utusan Malaysia .

UMP, . (2011) Karnival kerjaya dan keusahawanan tawar peluang pekerjaan. CREATE . p. 31. ISSN 1823-7487

UMP, . (2011) Kemeriahan Malam Antarabangsa pupuk kepelbagaian budaya. CREATE . p. 24. ISSN 1823-7487

UMP, . (2011) Kereta solar “Kilau”merentasi Benua Australia. CREATE . p. 28. ISSN 1823-7487

UMP, . (2011) Konsep baharu perpustakaan: bersediakah kita? CREATE (56). ISSN 1823-7487

UMP, . (2011) Lapan mahasiswa AS masuk Felda. Sinar Harian .

UMP, . (2011) Lawatan PM merancakkan lagi pembangunan UMP Kampus Pekan. CREATE . pp. 4-5. ISSN 1823-7487

UMP, . (2011) MATRES’11 tingkat pemahaman pelajar minat kejuruteraan kimia. CREATE (43). ISSN 1823-7487

UMP, . (2011) MB slams litterbugs who dirty rivers. The Star .

UMP, . (2011) MLCC tawar kursus bahasa Mandarin untuk staf. CREATE (19). ISSN 1823-7487

UMP, . (2011) Mahasiswa baharu lafaz ikrar. CREATE . p. 21. ISSN 1823-7487

UMP, . (2011) Mahasiswa cemerlang di Inova, Debat Perdana Gender dan Cabaran Catur Bistari. CREATE . p. 56. ISSN 1823-7487

UMP, . (2011) Majlis berbuka puasa bersama media erat hubungan. CREATE (34). ISSN 1823-7487

UMP, . (2011) Makmal Berpusat rancakkan aktiviti penyelidikan dan pengujian. CREATE (8). ISSN 1823-7487

UMP, . (2011) Makmal Chemital UMP diiktiraf antarabangsa. CREATE (14). ISSN 1823-7487

UMP, . (2011) Makmal berpusat rancak industri. Sinar Harian .

UMP, . (2011) Malaysia hab syarikat automotif Australia. Utusan Malaysia .

UMP, . (2011) Masyarakat dunia perlu pelajari bahasa Melayu. CREATE (15). ISSN 1823-7487

UMP, . (2011) Matres tingkat pemahaman bioteknologi, kejuruteraan. Utusan Malaysia .

UMP, . (2011) Mimi Sakinah dipilih tokoh Cendikia Bitara UMP. Utusan Malaysia .

UMP, . (2011) Minggu Kebudayaan Tahun Baharu Cina dapat sambutan. CREATE (41). ISSN 1823-7487

UMP, . (2011) Muhammad Azli juara Sayembara Puisi Merdeka Ke-54. CREATE . p. 49. ISSN 1823-7487

UMP, . (2011) NC lancar Pelan Strategik UMP 2011-2015. CREATE (9). ISSN 1823-7487

UMP, . (2011) Najwa jurutera muda berhasrat tubuh syarikat kejuruteraan sendiri. CREATE (52). ISSN 1823-7487

UMP, . (2011) Nurain menang Anugerah Saintis Muda Teknologi Hijau EYRec. CREATE (20). ISSN 1823-7487

UMP, . (2011) PDRM gesa penuntut IPT sertai Suksis. Utusan Malaysia .

UMP, . (2011) PM lancar Projek Teknologi Hijau UMP. CREATE (8). ISSN 1823-7487

UMP, . (2011) PPS lancar CGS Online. CREATE . p. 17. ISSN 1823-7487

UMP, . (2011) Pelajar FKKSA naib juara Pertandingan S-SPEC 2011 anjuran SHELL. CREATE (50). ISSN 1823-7487

UMP, . (2011) Pelajar antarabangsa UMP di Cherok Paloh. Utusan Malaysia .

UMP, . (2011) Pelan strategik berhasil. Harian Metro .

UMP, . (2011) Pemilihan MPP UMP berintegriti, dilaksanakan secara teratur. Berita Harian .

UMP, . (2011) Penat lelah ayah berbaloi walau tak sempat genggam diploma. CREATE . p. 13. ISSN 1823-7487

UMP, . (2011) Penyelidik UMP bawa pulang 10 pingat dalam MTE. CREATE (15). ISSN 1823-7487

UMP, . (2011) Penyelidik harumkan nama UMP di BIS 11’. CREATE . p. 26. ISSN 1823-7487

UMP, . (2011) Pertandingan lagu puisi IPT lahirkan mahasiswa prihatin. CREATE (38). ISSN 1823-7487

UMP, . (2011) Pertandingan puisi sempena sempena kempen kami prihatin. Utusan Malaysia .

UMP, . (2011) Perubahan mindset penting untuk pupuk minat dalam dunia penyelidikan. CREATE (26). ISSN 1823-7487

UMP, . (2011) Pilihan Raya berjalan lancar dan serentak di 2 kampus. CREATE (37). ISSN 1823-7487

UMP, . (2011) Pra pelancaran Expoconvo 11’ meriah. CREATE . p. 55. ISSN 1823-7487

UMP, . (2011) Prof. Dr. Yuserrie dilantik Komandan Kor Suksis yang baharu. CREATE (30). ISSN 1823-7487

UMP, . (2011) Program KLIK ziarah pelajar luar kampus. CREATE (29). ISSN 1823-7487

UMP, . (2011) Program merentas kampus mampu bina pemikiran kreatif penuntut IPT. Utusan Malaysia .

UMP, . (2011) Program teknologi memerlukan badan pengiktirafan sendiri. CREATE (22). ISSN 1823-7487

UMP, . (2011) Pusat akademik Jerman di UMP. Utusan Malaysia .

UMP, . (2011) Relevankah perpustakaan yang luas? CREATE (55). ISSN 1823-7487

UMP, . (2011) Rombongan UMP hulur sumbangan bantu keluarga pelajar. CREATE (51). ISSN 1823-7487

UMP, . (2011) Saber harumkan nama UMP dalam Eco-Challenge 2012. CREATE (44). ISSN 1823-7487

UMP, . (2011) Semangat 60 sukarelawan ceriakan rumah anak-anak yatim. CREATE . p. 58. ISSN 1823-7487

UMP, . (2011) Semarak Ramadan rai anak yatim dan pelajar. CREATE (25). ISSN 1823-7487

UMP, . (2011) Sepak takraw sumbang pingat perak di SUKUM 2011. CREATE (48). ISSN 1823-7487

UMP, . (2011) Sinar ECER bantu masyarakat Orang Kita di Runchang. CREATE (41). ISSN 1823-7487

UMP, . (2011) Sinergi UMP, industri tingkat pasaran graduan. Utusan Malaysia .

UMP, . (2011) Tempurung sawit dikitar semula menjadi bahan binaan. CREATE (11). ISSN 1823-7487

UMP, . (2011) UMP Holdings, SME Bank meterai perjanjian pembiayaan hartanah. CREATE . p. 45. ISSN 1823-7487

UMP, . (2011) UMP Staf FC beraksi cemerlang mencipta sejarah. CREATE (49). ISSN 1823-7487

UMP, . (2011) UMP adakan kerjasama dengan NIU. Utusan Malaysia .

UMP, . (2011) UMP anjur seminar kejuteraan kimia. Berita Harian .

UMP, . (2011) UMP bantu ibu tunggal dan anak yatim tingkat kesedaran IT. CREATE . p. 30. ISSN 1823-7487

UMP, . (2011) UMP capai 5 bintang penarafan data Mymohes. CREATE (31). ISSN 1823-7487

UMP, . (2011) UMP fail paten terbanyak. Utusan Malaysia .

UMP, . (2011) UMP hargai staf cemerlang dan jasa dikenang. CREATE (36). ISSN 1823-7487

UMP, . (2011) UMP hargai sumbangan industri. CREATE (24). ISSN 1823-7487

UMP, . (2011) UMP jalin kerjasama strategik dengan USU dan AMIK Tunas Bangsa. CREATE . p. 43. ISSN 1823-7487

UMP, . (2011) UMP jalin kolaborasi amal perkongsian ICT. CREATE . p. 34. ISSN 1823-7487

UMP, . (2011) UMP jayakan kempen hijaukan bumi. Berita Harian .

UMP, . (2011) UMP juara kejohanan sukan MTUN 2011. CREATE . p. 61. ISSN 1823-7487

UMP, . (2011) UMP komersial hasil penyelidikan. Utusan Malaysia .

UMP, . (2011) UMP lancar tabung kemanusiaan bencana alam Jepun. CREATE (27). ISSN 1823-7487

UMP, . (2011) UMP martabatkan bahasa Melayu. CREATE (35). ISSN 1823-7487

UMP, . (2011) UMP menang pingat emas di Hanoi. Utusan Malaysia .

UMP, . (2011) UMP naib juara pertandingan NACES. Utusan Malaysia .

UMP, . (2011) UMP naik taraf sistem aplikasi tingkat keupayaan IT. CREATE (28). ISSN 1823-7487

UMP, . (2011) UMP peneraju ICoE dalam bidang acuan tekap dan sistem suspensi. CREATE . p. 35. ISSN 1823-7487

UMP, . (2011) UMP perkasa pelajar kuasai bahasa ketiga. CREATE (12). ISSN 1823-7487

UMP, . (2011) UMP permata di hujung muara, Kuala Pahang bertukar wajah. CREATE (40). ISSN 1823-7487

UMP, . (2011) UMP pertama. Harian Metro .

UMP, . (2011) UMP raih 9 pingat di BioMalaysia 2011. CREATE . p. 27. ISSN 1823-7487

UMP, . (2011) UMP serius tangani gejala buang bayi - NC. Utusan Malaysia .

UMP, . (2011) UMP sumbang kepakaran rawat loji air kumbahan. CREATE (16). ISSN 1823-7487

UMP, . (2011) UMP tawar program kejuruteraan, teknologi bagi lepasan SPM. Utusan Malaysia .

UMP, . (2011) UMP terima wang zakat RM30,000 bantu pelajar miskin. CREATE . p. 47. ISSN 1823-7487

UMP, . (2011) UMP tuan rumah Karnival Bola Keranjang 3 on 3 IPT. CREATE . p. 62. ISSN 1823-7487

UMP, . (2011) UMP tuan rumah sesi dialog MQA bersama IPT di Zon Timur. CREATE (20). ISSN 1823-7487

UMP, . (2011) UMP tubuh pusat kecemerlangan. Utusan Malaysia .

UMP, . (2011) UMP, HP dan TEL jalin kerjasama tingkat penguasaan bidang perisian. CREATE . p. 44. ISSN 1823-7487

UMP, . (2011) UMP, JKM bantu ringan derita keluarga sakit kulit. Harian Metro .

UMP, . (2011) UMP, Kedutaan Besar Yemen eratkan hubungan dua hala. CREATE . p. 42. ISSN 1823-7487

UMP, . (2011) UMP, MAI jalin kerjasama tingkat daya saing industri automotif tempatan. CREATE (34). ISSN 1823-7487

UMP, . (2011) UMP, NIU jalin kerjasama tawar program teknologi kejuruteraan. CREATE (39). ISSN 1823-7487

UMP, . (2011) UMP, SIRIM sepakat bangunkan teknologi nano. CREATE (21). ISSN 1823-7487

UMP, . (2011) UMP, TM meterai persefahaman laksana Metro-E hubung dua kampus. CREATE (35). ISSN 1823-7487

UMP, . (2011) Usahawan jurutera hargai ilmu dari UMP. CREATE . p. 70. ISSN 1823-7487

UMP, . (2011) Wacana Strategi NC bincang pencapaian Pelan Strategik UMP. CREATE . p. 18. ISSN 1823-7487

UMP, . (2011) Warga UMP dirai dalam Cendekia Bitara. CREATE (10). ISSN 1823-7487

UMP, . (2011) Warga UMP sumbang 16,865.85 bantu mangsa kemanusiaan Somalia. CREATE . p. 48. ISSN 1823-7487

UMP, . (2011) Yuserrie Zainudin dilantik komandan Suksis UMP. Utusan Malaysia .

UMP, FSKKP (2011) Undergraduate Skill Programme (USK). Bit@FSKKP . pp. 16-17. ISSN 1985-7969

UMP, PNC (2011) 1st International Conference and Exhibition of Women Engineers. Program UMP . pp. 1-12. (Unpublished)

UMP, PNC (2011) Buku Program Cabaran Kepimpinan Masa Hadapan Dari Kaca Mata YABhg Tun Dr. Mahathir Mohamad. Program UMP . pp. 1-6. (Unpublished)

UMP, PNC (2011) Garis Panduan Imej Korporat UMP. Program UMP . pp. 1-48. (Unpublished)

UMP, PNC (2011) Hari Inovasi 2011. Program UMP . pp. 1-8. (Unpublished)

UMP, PNC (2011) Lawatan Perdana Menteri Malaysia ke Kampus UMP, Pekan 2011. Program UMP . pp. 1-6. (Unpublished)

UMP, PNC (2011) Majlis Anugerah Perkhidmatan Cemerlang 2010 & Jasa Dikenang. Program UMP . pp. 1-18. (Unpublished)

UMP, PNC (2011) Majlis Pelancaran Kempen Kami Prihatin 'Apakah Dosaku'. Program UMP . pp. 1-13. (Unpublished)

UMP, PNC (2011) Pelan Strategik UMP 2011-2015. UNSPECIFIED. (Unpublished)

W

Waleed Khalid, Abduljabbar (2011) An integrated decision support system based on simulation and mathematical programming of Petroleum transportation logistics. PhD thesis, Universiti Malaysia Pahang.

Wan Faizal, Wan Ishak and N., Ali and Asiah, Kassim (2011) The Effect Of Tree Induce Suction On Slope Stabilization Analysis. International Journal of Civil Engineering and Geo-Environmental, 4 . pp. 15-22. ISSN 2180-2742 (Print); 2504-849X (Online)

Wan Ismail, Ibrahim and Raja Mohd Taufika, Raja Ismail (2011) Development of Variable Speed Drive for Single Phase Induction Motor Based on Frequency Control. In: 4th Engineering Conference (EnCon 2011), 29 Nov - 1 Dec 2011 , Riverside Majestic Hotel, Kuching Sarawak . .

Wan Maseri, Wan Mohd and Beg, Abul Hashem and Herawan, Tutut and Noraziah, Ahmad (2011) Improved Parameterless K-Means: Auto-Generation Centroids and Distance Data Point Clusters. International Journal of Information Retrieval Research (IJIRR), 1 (3). pp. 1-14. ISSN 2155-6377 (print); 2155-6385 (online)

Wan Mohd Kamil, Wan Yacob (2011) Analysis of ventilation and heat removing system for Waja car. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Wan Mohd Nazmi, Wan Abdul Rahman and Achmad Fauzi, Abdul Wahab (2011) Influence of Recycled High Density Polyethylene on the Conventional and Morphology Properties of Bitumen. Journal of Engineering and Technology, 2 (1). pp. 67-74. ISSN 2180-3811

Wan Nazrul Helmy, Wan Mohd Zain (2011) Kilauan mutiara erat hubungan Kelab In-Smartive UMP, SK FELDA Purun. CREATE (45). ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2011) Teach Malaysia Teach signifikan bagi jayakan UKRA Pembangunan Sosioekonomi. CREATE . p. 59. ISSN 1823-7487

Wan Sulaiman, Wan Mohamad (2011) A study of energy utilisation in a variable link length 3 DOF revolute articulated manipulator. Masters thesis, Universiti Malaysia Pahang.

Wong, Fei Yong (2011) Design and fabrication of MIG welding jigs. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wong, Ying Tze (2011) Integrated Malaysian culture biofeedback game using pulse sensor (IMCBG). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Y

Yasmin, Abdul Wahab (2011) Application Of Transmission-Mode Ultrasonic Tomography To Identify Multiphase Flow Regime. In: International Conference On Electrical, Control And Computer Engineering 2011 (INECCE 2011), 21-22 June 2011 , Hyatt Regency ,Kuantan, Pahang. .

Yuhani, Yusof and Nor Haniza, Sarmin and Fong, Wan Heng and Fariba, Karimi (2011) Some Relations on Different Types of Splicing Systems. Journal of Fundamental Sciences, 6 (2). pp. 143-147. ISSN 1823-626X

Yuhani, Yusof and Nor Haniza, Sarmin and Mazri, Mahmud and T., Elizabeth Goode and Fong, Wan Heng (2011) An Extension of DNA Splicing Systems. In: Proceedings of the Sixth International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA 2011), 27-29 September 2011 , Penang, Malaysia. pp. 246-248..

Yusnani, Husli (2011) The assessment of measurement application for timber traditional Malay house. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Yusnani, Yusuf (2011) Paddy disease identification and vector control system (PADICS). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Yusri , Sahat (2011) UMP lancar pelan strategik 2011-2015. Utusan Malaysia .

Z

Z., Ghazalli and Murata, A. (2011) Development of an AHP–CBR Evaluation System for Remanufacturing: End-of-Life Selection strategy. International Journal of Sustainable Engineering, 4 (1). pp. 2-15. ISSN 1939-7038

Z., Ghazalli and Murata, Atsuo (2011) An Integrated TSP-GA with EOL Cost Model for Selecting the Best EOL Option. International Journal of Industrial Engineering Computations, 2 (4). pp. 775-792. ISSN 1923-2926 (Print); 1923-2934 (Online)

Zailin Shah, Yusoff (2011) Feedback via Wikis: Revisions and Improvement. In: Proceedings of Global Learn 2011, 28 March – 01 April 2011 , Melbourne, Australia. pp. 388-393.. ISBN 978-1-880094-85-3

Zainatul Bahiyah , Handani (2011) A Mixed Integer Linear Programming (MILP) Model for Optimal Design of Water Network. In: 4th International Conference on Modelling, Simulation and Applied Optimization, 19-21 April 2011 , Impiana KLCC Hotel & Spa Kuala Lumpur.. pp. 1-6..

Zainol, Mustafa and M. R., Abdul Hamid and Nur Riza, Mohd Suradi and Fazli, Idris and Mokhtar, Abdullah and Abdullah, Ibrahim (2011) The Influence of Leadership Values on Culture Values: A Structural Equation Modelling Approach = Pengaruh Nilai Kepimpinan ke atas Nilai Budaya: Suatu Pendekatan Pemodelan Persamaan Berstruktur. Jurnal Pengukuran Kualiti dan Analisis, 7 (2). pp. 1-14. ISSN 1823-5670

Zainol, Mustafa and Teoh, Szu Jane and M. R., Abdul Hamid (2011) Kajian Kepuasan Pelajar Kejuruteraan Universiti Di Malaysia Menggunakan Pemodelan Persamaan Berstruktur = A Study of Engineering Students’ Satisfaction in Malaysian Universities Using Structural Equation Modelling. Jurnal Pengukuran Kualiti dan Analisis , 7 (1). pp. 117-127.

Zakri , Ghazali (2011) Development of intelligent evaluation system for product end-of-life selection strategy. PhD thesis, Japan , Okayama University.

Zamzurina, Ahmad (2011) MIA sasar 5,700 pakar jurutera. Utusan Malaysia .

Zamzurina, Ahmad (2011) Penuntut AS belajar bahasa Melayu. Utusan Malaysia .

Zhang, Hui and A., Zulkiple (2011) Determination of the Measurement of Un-signalized Intersection Elasticity for a Traffic Control System. International Journal of Civil Engineering and Geo-Environmental, 5 (8). pp. 1-5. ISSN 2180-2742

Zulkarnain, Lubis (2011) Three phase induction motor coupled to DC motor in hybrid electric vehicle application. PhD thesis, Universiti Malaysia Pahang.

Zuraina, Ali (2011) Multimedia Resource for Self Access: How Students Benefit from It? In: International Conference on English Language Teaching ( ICELT 2011), 18-20 September 2011 , Lumut, Perak. pp. 1-12.. (Unpublished)

Zuraina, Ali and Jayakaran, Mukundan and Ahmad Fauzi, Mohd Ayub and Roselan, Baki (2011) The Effectiveness of Using Contextual Clues, Dictionary Strategy and Computer Assisted Language Learning (Call) In Learning Vocabulary. International Journal of Business and Social Research (IJBSR), 1 (1). pp. 136-152. ISSN 2164-2540 (print), 2164-2559 (online)

Zuraina, Ali and Jayakaran, Mukundan and Ahmad Fauzi, Mohd Ayub and Roselan, Baki (2011) The Use of Tell Me More (TMM) in Learning Vocabulary Among ESL Students. In: 5th International Malaysian Educational Technology Convention (IMETC 2011), 16-19 October 2011 , Vistana Hotel, Kuantan, Pahang. pp. 1-9.. (Unpublished)

This list was generated on Sat Oct 21 14:18:56 2017 MYT.

 

 

 

 

 

 

Introduction

An Institutional Repository is an online focus for collecting, preserving, and disseminating any University publication in the digital form for the intellectual sharing.
The UMP Institutional Repository (UMP IR) provides access of University publication such as journal article, conference paper, research paper, thesis and dissertations.


Any Enquiries

Please email or call Knowledge Management staff:-

Pn. Noorul Farina (09-424 5605) OR
Cik Ratna Wilis Haryati (09-424 5612)

Any correspondence concerning this specific repository should be sent to umplibrary@ump.edu.my