Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Library of Congress Subject Areas (682)
- T Technology (682)
  - TL Motor vehicles. Aeronautics. Astronautics (682)

Group by: Authors | Item Type

Number of items at this level: 682.

Article

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

Abdalla, Ahmed N. and R. A., Bakar and Tao, Hai and Ramasamy, D. and K., Kadirgama and Fooj, Benedict and Tarlochan, F. and Sivaraos, S. (2020) Effect of swirl at intake manifold on engine performance using ethanol fuel blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (1). pp. 73-88. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Abdalla, Ahmed N. and Tao, Hai and Bagaber, Salem Abdullah and Obed M., Ali and Kamil, Mohammed and Ma, Xiao and Awad, Omar I. (2019) Prediction of emissions and performance of a gasoline engine running with fusel oil–gasoline blends using response surface methodology. Fuel, 253. pp. 1-14. ISSN 0016-2361. (Published)

Abdullah, Z. and Peeie, M. H. and Zakaria, M. A. and Ishak, M. I. and Shahrom, M. A. and Kujunni, B. (2022) Motion planning and tracking trajectory of an autonomous emergency braking pedestrian (AEB-P) system based on different brake pad friction coefficients on dry road surface. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 10002 -10013. ISSN 2180-1606. (Published)

Adzmi, M. A. and Abdul Adam, Abdullah and Abdullah, Z. and Mrwan, Anes G. (2019) Effect of Al2O3 and SiO2 metal oxide nanoparticles blended with POME on combustion, performance and emissions characteristics of a diesel engine. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (3). pp. 6859-6873. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Alenzi, Eisa and Sitti Asmah, Hassan and Othman, Che Puan (2022) Car following behaviours on multilane highways in Kuwait: A case study on road 40 during winter season. Journal of Engineering Research, 10 (1B). pp. 86-102. ISSN 2307-1885. (Published)

Alhamed, Abdulrahman and Mohd Romlay, Fadhlur Rahman and Muhammad, Khairul Fikri and Mohd Zawawi, Mohd Zairulnizam and Ishak, I. (2022) Support-free fused deposition modelling printing for overhangs structure. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 64-71. ISSN 2637-0883. (Published)

Amiera Azwa, Abdul Ghafar and Noraini, Mohd Razali (2022) The significant of lean practice on the sustainability performance in automotive manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 83-89. ISSN 2636-9575. (Published)

Amir, Al-Falahi and Yusoff, M. Z. and Diyar, I. Ahmed (2012) An Experimental Evaluation of Transient Flows in a Supersonic Gun Tunnel. International Journal of Automotive and Mechanical Engineering (IJAME), 6 (Jul. pp. 701-712. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Abdollah, Mohd Fadzli and R., Mamat and Alias, Azri (2017) Effect of vaned diffuser on the performance of small turbocharger. Journal of Mechanical Engineering, SI (1). pp. 227-236. ISSN 1823-5514. (Published)

Anwar, M. Shahril and Rasid, Mohd Azri Hizami (2022) Evaluation of direct-quadrature position and saturation of a SynRM machine with segmented rotor. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 1-5. ISSN 2637-0883. (Published)

Ashwindran, S. and Azizuddin, Abd Aziz and Oumer, A. N. (2019) Computational fluid dynamic (CFD) of vertical-axis wind turbine: Mesh and time-step sensitivity study. Journal of Mechanical Engineering and Sciences (JMES), 13 (3). 5604 -5624. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Asri, M. N. A. M. and Abdullah, N.A.Z. and M. S. M., Sani (2021) The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8459 -8468. ISSN 2231-8380 (online). (Published)

Azam, M. and Hassan, S. A. and Puan, O. C. and Azhari, S. F. and Faiz, R. U. (2022) Performance of autonomous vehicles in mixed traffic under different demand conditions. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10050-10062. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Benedict, F. and Kumar, Amit and K., Kadirgama and Mohammed, Hussein A. and D., Ramasamy and Mahendran, Samykano and Saidur, R. (2020) Thermal performance of hybrid-inspired coolant for radiator application. Nanomaterials, 10 (6). pp. 1-34. ISSN 2079-4991. (Published)

Bhallamudi, Ramkiran and Kumarasamy, Sudhakar and Sundarabalan, Chinnayan Karuppaiyah (2021) Effect of dust and shadow on performance of solar photovoltaic modules : Experimental analysis. Energy Engineering: Journal of the Association of Energy Engineering, 118 (6). pp. 1827-1838. ISSN 0199-8595. (Published)

Buhairi, Minhalina Ahmad and Mohd Foudzi, Farhana and Jamhari, Fathin Iliana and Sulong, Abu Bakar and Mohd Radzuan, Nabilah Afiqah and Muhamad, Norhamidi and Mohamed, Intan Fadhlina and Azman, Abdul Hadi and Wan Sharuzi, Wan Harun and M.S.H., Al-Furjan (2023) Review on volumetric energy density: inluence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion. Progress in Additive Manufacturing, 8 (2). pp. 265-283. ISSN 23639512. (Published)

Chai, S. W. and Kamaluddin, M. R. and Ab Rashid, M. F. F. (2022) Optimisation of vehicle routing problem with time windows using Harris Hawks optimiser. Journal of Mechanical Engineering and Sciences (JMES), 16 (3). 9056 -9065. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Che Wan, Mohd Noor and R., Mamat and Najafi, G. and Anuar, Abu Bakar and Samo, Khalid (2019) Determination of bio-diesel engine combustion pressure using neural network based model. Journal of Engineering Science and Technology, 14 (2). pp. 909-921. ISSN 1823-4690. (Published)

D., Ramasamy and K., Kadirgama and R. A., Bakar and Z. A., Zainal (2014) Mass Fraction Burn Comparison of Compressed Natural Gas and Gasoline. Applied Mechanics and Materials, 660. pp. 442-446. ISSN 1662-7482. (Published)

D., Ramasamy and Khoo, Aik Soon and Z. A., Zainal and Briggs, Horizon Walker-Gitano (2012) Variation of Air Flow Pattern Through Dissimilar Valve Lift In A Spark Ignition Engine. Journal of the Chinese Institute of Engineers, 36 (8). pp. 1-14. ISSN 0253–3839 (print); 2158–7299 (online). (Published)

D., Ramasamy and K., Kadirgama and M. M., Noor (2017) Experiments on Dissimilar Valve Lift (DVL) for Turbulence Increment on a Bi-Fuel Compressed Natural Gas (CNG) Engine. Defect and Diffusion Forum, 370. pp. 19-28. ISSN 1662-9507. (Published)

D., Ramasamy and Z. A., Zainal and K., Kadirgama and Briggs, Horizon Walker-Gitano (2016) Effect of Dissimilar Valve Lift on a bi-fuel CNG Engine Operation. Energy, 112. 509 - 519. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Das, Likhan and Aslfattahi, Navid and Khairul, Habib and Saidur, R. and Das, Anupom and Kadirgama, Kumaran (2023) Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+Al2O3 nanofluid : A numerical two-phase approach. Heliyon, 9 (e14283). pp. 1-17. ISSN 2405-8440. (Published)

Das, Likhan and Rubbi, Fazlay and Khairul, Habib and Aslfattahi, Navid and Rahman, Saidur and Yahya, Syed Mohd and Kadirgama, Kumaran (2022) Insight into the investigation of diamond nanoparticles suspended therminol 55 nanoﬂuids on concentrated photovoltaic/thermal solar collector. Nanomaterials, 12 (2975). pp. 1-22. ISSN 2079-4991. (Published)

Dwivedi, Pushpendu and Ganesh, Sujay Ashwinraj and Kumarasamy, Sudhakar and Soni, Archana and Priya, S. Shanmuga (2023) Thermal and electrical performance of uncooled, nature-cooled, and photovoltaic thermal module. International Journal of Photoenergy, 2023 (4720545). pp. 1-12. ISSN 1687-529X (Online). (Published)

Erdiwansyah, . and Muhammad, Zaki and Mahidin, . and R., Mamat and Ahmad Fitri, Yusop and Herri, Susanto and Asep, Kadarohman and Fitri, Khoerunnisa and Ratna, Eko Sardjon (2020) The effects of using diesel-citronella fuel blend on the emission and fuel consumption for single-cylinder diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (2). pp. 1-15. ISSN 2289-7879. (Published)

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Husni, Husin and Nasaruddin, Nasaruddin and Asri, Gani and Rizalman, Mamat (2023) Modification of perforated plate in fluidized-bed combustor chamber through computational fluid dynamics simulation. Results in Engineering, 19 (101246). pp. 1-12. ISSN 2590-1230. (Published)

Ezazi, Mohammadamin and Quazi, Moinuddin Mohammed (2023) Recent developments in two-dimensional materials-based membranes for oil–water separation. Membranes, 13 (677). pp. 1-24. ISSN 2077-0375. (Published)

Faizil, Wasbari and R. A., Bakar and Gan, Leong Ming and Mohd Azli, Salim and Mohamad Firdaus, Sukri and Hairol Nizam, Mohd Shah and Safarudin Gazali, Herawan (2020) The effects of multiple energy storage on the capacity and performance of hydro-pneumatic driveline. International Journal Nanoelectronics and Materials, 13 (ISSTE 2019). 233-246]. ISSN 1985-5761 (print); 2232-1535 (online). (Published)

Faturachman, Danny and Shariman, Mustafa (2012) Trend Analysis of Ship Accidents in Indonesia. World Academy of Science, Engineering and Technology (2 (Jan). ISSN 2010-376x; 2010-3778 (electronic). (Published)

Ferdous, I. U. and Nasrul Azuan, Alang and Juliawati, Alias and S., Mohd Nadzir (2021) Numerical prediction of creep rupture life of ex-service and as-received grade 91 steel at 873 K. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8845 -8858. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Gani, Asri and Erdiwansyah, Erdiwansyah and Sardjono, Ratnaningsih Eko and Mariana, Mariana and Rizalman, Mamat (2022) Comparison of remaining coal-burning ash-based on cd, pb, and hg concentration at different temperatures : A case study in aceh province. Journal of Environmental Engineering and Landscape Management, 30 (3). pp. 342-349. ISSN 1648-6897. (Published)

Ghiasi, Pedram and Najafi, Gholamhassan and Ghobadian, Barat and Jafari, Ali and Rizalman, Mamat and Mohd Fairusham, Ghazali (2023) CFD-study of the H-Rotor Darrius wind turbine performance in drag-lift and lift regime : Impact of type, thickness and chord length of blades. Alexandria Engineering Journal, 67. pp. 51-64. ISSN 1110-0168. (Published)

Gopi, Ajith and Sharma, Prabhakar and Sudhakar, Kumarasamy and Ngui, Wai Keng and Kirpichnikova, Irina and Cuce, Erdem (2023) Weather impact on solar farm Performance : A comparative analysis of machine learning techniques. Sustainability (Switzerland), 15 (439). pp. 1-28. ISSN 2071-1050. (Published)

Goyal, Ashish and Rahman, Huzef U. R. and Che Ghani, S. A. (2021) Experimental investigation & optimisation of wire electrical discharge machining process parameters for Ni49Ti51 shape memory alloy. Journal of King Saud University - Engineering Sciences, 33 (2). pp. 129-135. ISSN 1018-3639. (Published)

Hamada, Khalaf I. and Rahim, M. F. and Raham, M. M. and A. Bakar, Rosli (2022) Throttling effect on the performance and emissions of a multi-cylinder gasoline fuelled spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (4). pp. 10084-10093. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Hamisa, Abdul Hamid and Wan Hamzah, Wan Azmi and Mohd Farid, Ismail and Rosminazuin, Ab Rahim and Ali, Hafiz Muhammad (2023) Tribology performance of polyol-ester based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (18). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Hamzah, Ahmad and Siti Nur Aini, Basiran (2015) Fuzzy logic based vehicle speed control performance considering different membership types. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9773-9778. ISSN 1819-6608. (Published)

Hariram, Nediyirippil Prakasan and Mekha, K. B. and Suganthan, Vipinraj and Sudhakar, Kumarasamy (2023) Sustainalism: An integrated socio-economic-environmental model to address sustainable development and sustainability. Sustainability (Switzerland), 15 (10682). pp. 1-37. ISSN 2071-1050. (Published)

Hilmi, Amiruddin and Wan Mohd Faizal, Wan Mahmood and Shahrir, Abdullah and Mohd Radzi, Abu Mansor and R., Mamat and Azri, Alias (2017) Application of Taguchi Method in optimization of design darameter for turbocharger vaned diffuser. Industrial Lubrication and Tribology, 69 (3). pp. 409-413. ISSN 0036-8792. (Published)

Hoh, R. B. and Nasrul Azuan, Alang and Nasrul Hadi, Johari and Norhaida, Ab Razak and Juliawati, Alias (2023) Applying TRIZ to design and develop roof shield for two-wheeled motorcycle. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 15-23. ISSN 2636-9575. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Ebadi, M. T. and R., Mamat and Yusaf, T. (2020) Biodiesels from three feedstock : the effect of graphene oxide (GO) nanoparticles diesel engine parameters fuelled with biodiesel. Renewable Energy, 145. pp. 190-201. ISSN 0960-1481. (Published)

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Ebadi, M. T. and R., Mamat and Yusaf, T. (2020) Performance and emission characteristics of a CI engine using graphene oxide (GO) nano-particles additives in biodiesel-diesel blends. Renewable Energy, 145. pp. 458-465. ISSN 0960-1481. (Published)

Hou, Wentao and L. H., Shah and Huang, Guoqiang and Shen, Yifu and Gerlich, Adrian (2020) The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints. Journal of Alloys and Compounds, 825 (154045). pp. 1-30. ISSN 0925-8388 (print), 1873-4669 (online). (Published)

Husin, Husni and Mahidin, Mahidin and Marwan, Marwan and Nasution, Fahrizal and Erdiwansyah, Erdiwansyah and Ahmadi, Ahmadi and Muchtar, Syawaliah and Yani, Firda Tirta and Rizalman, Mamat (2023) Conversion of polypropylene-derived crude pyrolytic oils using hydrothermal autoclave reactor and Ni/aceh natural zeolite as catalysts. Heliyon, 9 (e14880). pp. 1-10. ISSN 2405-8440. (Published)

Husnain, M.M.N. and Akramin, M. R.M. and Shaari, M. S. and Takahashi, Akiyuki and Bashiri, Abdullateef H. and Alshoaibi, Abdulnaser M. (2023) Comparison of Monte Carlo and bootstrap analyses for residual life and confidence interval. Materials Science- Poland, 41 (1). pp. 15-26. ISSN 2083-1331. (Published)

Hussain, Abdul Ahad and Kamran, Kashif and Hina, Maryam and Ishaq, Mubashera and Naz, Muhammad Y and Bashir, Shahid and Sarwar, Nadeem and Quazi, Moinuddin Mohammed (2023) Effect of electrokinetic treatment time on energy consumption and salt ions removal from clayey soils. Materials Research Express, 10 (05550). ISSN 2053-1591. (Published)

I. M., Zulhilmi and Mohamad Heerwan, Peeie and R. I. M., Eiman and Muhammad Izhar, Ishak and S. M., Asyraf (2019) Investigation on vehicle dynamic behaviour during emergency braking at different speed. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6161-6172. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Ikeda, Keigo and Kamimori, Kota and Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Endo, Ayato and Kato, Taro and Liu, Xiaojun and Peeie, Mohamad Heerwan and Kato, Hideaki and Narita, Takayoshi (2023) Basic study on mechanical vibration suppression system using 2-degree-of-freedom vibration analysis. Vibration, 6 (2). pp. 407-420. ISSN 2571-631X. (Published)

Irawan, Agustinus Purna and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara and Anggarina, Paula Tjatoerwidya and Utama, Didi Widya and Rihayat, Teuku and Rusiyanto, Rusiyanto and Dimyati, Saeful and Aripin, Muhammad Bustanul and Ismail, Rifky and Bayuseno, Athanasius Priharyoto and Baskara, Gregorius Dimas and Khafidh, Muhammad and Putera, Finny Pratama and Yotenka, Rahmadi (2023) Inﬂuence of varying concentrations of epoxy, rice husk,Al2O3, and Fe2O3on the properties of brake friction materials prepared using hand layup method. Polymers, 15 (2597). pp. 1-19. ISSN 2073-4360. (Published)

Irnie Azlin, Zakaria and Wan Ahmad Najmi, Wan Mohamed and Zailan, M. B. and Azmi, W. H. (2019) Experimental analysis of SiO2-distilled water nanofluids in a polymer electrolyte membrane fuel cell parallel channel cooling plate. International Journal of Hydrogen Energy, 44 (47). pp. 25850-25862. ISSN 0360-3199. (Published)

Ismail, Muhammad Yusri and Beg, M. S. and Jamlos, M. F. and Azmi, W. H. and Badrulhisam, N. H. and Awad, Omar I. (2022) Potential and limitation of internet of things (IOT) application in the automotive industry: An overview. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). 9939 -9949. ISSN 2180-1606. (Published)

Ismail, Rifky and Fitriyana, Deni Fajar and Bayuseno, Athanasius Priharyoto and Jamari, Jamari and Pradiptya, Putut Yoga and Muhamadin, Rilo Chandra and Nugraha, Fariz Wisda and Rusiyanto, Rusiyanto and Setiyawan, Andri and Bahatmaka, Aldias and Firmansyah, Hendrix Noviyanto and Anis, Samsudin and Irawan, Agustinus Purna and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Investigating the effect of deacetylation temperature on the characterization of chitosan from crab shells as a candidate for organic nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 55-67. ISSN 2289-7879. (Published)

Jakfar, Jakfar and Husin, Husni and Pontas, Komala and Mamat, Rizalman and Salleh, Mohd Rosdi and Zulrika, Mirna and Ahmadi, Ahmadi (2023) Modiﬁcation of the fermentation process and papain enzymes in the manufacture of virgin coconut oil using optimization of response surface methodology, central composite design. Fermentation, 9 (434). pp. 1-14. ISSN 2311-5637. (Published)

Jaliliantabar, Farzad and Ghobadian, B. and Najafi, G. and R., Mamat and Carlucci, Antonio Paolo (2019) Multi-objective NSGA-II optimization of a compression ignition engine parameters using biodiesel fuel and exhaust gas recirculation. Energy, 187. pp. 1-2. ISSN 0360-5442 (Print), 1873-6785 (Online). (Published)

Jaliliantabar, Farzad and Rizalman, Mamat and Sudhakar, Kumarasamy (2021) Prediction of lithium-ion battery temperature in different operating conditions equipped with passive battery thermal management system by artificial neural networks. Materials Today: Proceedings, 48 (6). pp. 1796-1804. ISSN 2214-7853. (Published)

Jarrah, H. T. and Mohtasebi, S. S and Ettefaghi, E. and Jaliliantabar, F. (2021) Experimental investigation of silver / water nanofluid heat transfer in car radiator. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). pp. 7743-7753. ISSN 2231-8380 (online). (Published)

K. A., Azuddin and A. K., Junoh and Zamri, Mohamed and M. T., Abdul Rahman (2020) A comparative study on interior acoustic comfort level of compact cars using data mining approach. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (1). pp. 7695-7708. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Kadhim, Nassir and Mohammed, Muamer N. and Mazlina, Abdul Majid and Mohamd, Sinan Q. and Tao, Hai (2016) An Efficient Route Selection based on AODV Algorithm for VANET. Indian Journal of Science and Technology, 9 (38). pp. 1-6. ISSN 0974-6846 (Print); 0974-5645 (Online). (Published)

Kadirgama, Kumaran and Awad, Omar I. and Mohammed, M.N and Tao, Hai and Bash, Ali A. H. Karah (2023) Sustainable green energy management : Optimizing scheduling of multi-energy systems considered energy cost and emission using attractive repulsive shuffled frog-leaping. Sustainability, 15 (10755). pp. 1-19. ISSN 2071-1050. (Published)

Kamil Zakwan, Mohd Azmi and Ahmad Shahrizan, Abdul Ghani and Zulkifli, Md. Yusof and Zuwairie, Ibrahim (2019) Natural-based underwater image color enhancement through fusion of swarm-intelligence algorithm. Applied Soft Computing, 85 (105810). pp. 1-19. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kavin, Klinsman Konsil and Norazlianie, Sazali and Kumaran, Kadirgama and Norazwina, Zainol (2023) Analysis on the Performance of Designed Fluidized Bed Dryer for Drying Coffee Beans. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (1). pp. 99-109. ISSN 2462-1943. (Published)

Kazem, Shahverdi and Gholamhassan, Najafi and Rizalman, Mamat and Mohd Fairusham, Ghazali and A.S., EI-Shafy and Mohamed, Mousa (2023) Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72. pp. 162-172. ISSN 0973-0826. (Published)

Keng, Ngui Wai and Mohd Salman, Leong and Mohd Ibrahim, Shapiai and Hee, Lim Meng (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680. (Published)

Khairul, Mohd Arshad and Muhamad, Mat Noor and Asrulnizam, Abd Manaf and Kawarada, Hiroshi and Falina, Shaili and Mohd, Syamsul (2022) A comparative modelling study of new robust packaging technology 1mm2 VCSEL packages and their mechanical stress properties. Micromachines, 13 (1513). pp. 1-15. ISSN 2072-666X. (Published)

Khalid, N. S. and Rahim, M. R. and Hassan, M. F. (2022) Sensitivity identification of low-frequency cantilever fibre bragg grating accelerometer using cascade-forward backpropagation neural network. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (1). pp. 9419-9432. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Kobayashi, Ikkei and Kuroda, Jumpei and Uchino, Daigo and Ogawa, Kazuki and Ikeda, Keigo and Kato, Taro and Endo, Ayato and Peeie, Mohamad Heerwan and Narita, Takayoshi and Kato, Hideaki (2023) Research on yaw moment control system for race cars using drive and brake torques. Vehicles, 5 (2). pp. 1-20. ISSN 2624-8921. (Published)

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

Kumar, Nallapaneni Manoj and Sudhakar, K. and Samykano, M. (2019) Performance evaluation of CdTe BIPV roof and façades in tropical weather conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (9). pp. 1057-1071. ISSN 1556-7036 (Print); 1556-7230 (Online). (Published)

Lee, Wei Loon and Sreekar Reddy, S. and A. K., Prasada Rao (2019) CFD simulation of direct chill casting process of magnesium alloy billets. Journal of Manufacturing Processes, 45. pp. 447-454. ISSN 1526-6125. (Published)

Liao, Binbin and Wang, Panding and Zheng, Jinyang and Cao, Xiaofei and Quanjin, Ma and Tao, Ran and Fang, Daining (2020) Effect of double impact positions on the low velocity impact behaviors and damage interference mechanism for composite laminates. Composites Part A: Applied Science and Manufacturing, 136 (105964). pp. 1-11. ISSN 1359-835X. (Published)

Loh, Jit Hao and M. Nafis, O. Z. (2022) A study on obstacle detection for IoT based automated guided vehicle (AGV). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 30-41. ISSN 2637-0883. (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M. A., Fitriady and Nurizzatul Atikha, Rahmat and A. F., Mohammad and S. A., Zaki (2023) Numerical simulation of the boundary layer development behind a single quarter elliptic-wedge spire. Journal of Mechanical Engineering and Sciences (JMES), 17 (2). 9421 -9432. ISSN 2231-8380 (online). (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Mukhtar, N. A. and Abd Rashid, Abd Aziz and Hagos, F. Y. and M. M., Noor and K., Kadirgama and R., Mamat and Abdul Adam, Abdullah (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (diesel–ethanol–biodiesel) emulsion properties. Energies, 12 (9). pp. 1-24. ISSN 1996-1073. (Published)

M. N. A., Mukhtar and Hagos, F. Y. and M. M., Noor and R., Mamat and Abdul Adam, Abdullah and Abd Rashid, Abd Aziz (2019) Tri-fuel emulsion with secondary atomization attributes for greener diesel engine – a critical review. Renewable and Sustainable Energy Reviews, 111. pp. 490-506. ISSN 1364-0321. (Published)

M. Razali, Hanipah and Mikalsen, R. and Roskilly, A.P. (2022) The real-time interaction model for transient mode investigations of a dual-piston free-piston engine generator. Applied Thermal Engineering, 212 (118629). pp. 1-28. ISSN 13594311. (Published)

M. S. M., Ghazali and F. R. M., Romlay and A. A., Ehsan (2021) Manufacturing of polymer-based 1×2 Y-branch symmetric and asymmetric waveguide coupler through moulding technique. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 8998 -9005. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. Z., Sharif and W. H., Azmi and N. N. M., Zawawi and M. F., Ghazali (2022) Comparative air conditioning performance using SiO2 and Al2O3 nanolubricants operating with Hydrofluoroolefin-1234yf refrigerant. Applied Thermal Engineering, 205 (118053). pp. 1-13. ISSN 1359-4311. (Published)

Ma, Quanjin and Kuai, Tengfei and M. R. M., Rejab and Manoj Kumar, Nallapaneni and M. S., Idris and Abdullah, M. H. (2020) Effect of boundary factor and material property on single square honeycomb sandwich panel subjected to quasi-static compression loading. Journal of Mechanical Engineering and Sciences (JMES), 14 (4). 7348 -7360. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohammad, Azeem and Mat Sahat, Idris and M.F., Rani and Kumar, A.Praveen (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10 (100170). pp. 1-10. ISSN 2666;3597. (Published)

Ma, Quanjin and Rejab, M. R. M. and Abu Hassan, Shukur and Hu, Haichao and Kumar, A. Praveen (2022) Potentiality of MWCNT on 3D-printed bio-inspired spherical-roof cubic core under quasi-static loading. Journal of the Mechanical Behavior of Biomedical Materials, 136 (105514). pp. 1-7. ISSN 1751-6161. (Published)

Ma, Quanjin and Rejab, M. R. M. and Azman, O. and Aleem, S. A. A. and Tung, N. A. and Asan, S. K. and Rahim, S. R. A. and Kumar, A. Praveen (2022) Development of the real-time winding angle measurement device for the laboratory-scale 3-axis winding machine. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Ma, Quanjin and Rejab, M. R. M. and Kumar, A. Praveen and Fu, Hao and Manoj Kumar, Nallapaneni and Tang, Jianbo (2021) Effect of infill pattern, density and material type of 3D printed cubic structure under quasi-static loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (19). 4254 -4272. ISSN 0954-4062. (Published)

Ma, Quanjin and Rejab, M. R. M. and Siregar, J. P. and Guan, Zhongwei (2021) A review of the recent trends on core structures and impact response of sandwich panels. Journal of Composite Materials, 55 (18). pp. 2513-2555. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Ma, Quanjin and Rejab, M. R. M. and Sun, Bo and Merzuk, M. N. M. (2021) A brief review of the cubic star on structural design, applications, and future perspective. Journal of Advanced Research in Applied Sciences and Engineering Technology, 24 (1). pp. 10-17. ISSN 2462-1943. (Published)

Maoqi, Li and Ishak, M. I. and Peeie, M. H. (2022) A numerical simulation of vehicle dynamics behavior for a four-wheel steering vehicle with the passive control system. Journal of Mechanical Engineering and Sciences (JMES), 16 (2). 8953 -8964. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Md. Abdur, Rahim and Rahman, Md. Arafatur and Rahman, M. M and Asyhari, A. Taufiq and Alam Bhuiyan, Md. Zakirul and Ramasamy, D. (2020) Evolution of IoT-enabled connectivity and applications in automotive industry: A review. Vehicular Communications, 27. pp. 1-15. ISSN 2214-2096. (Published)

Mohd Azri Hizami, Rasid and Benkara, Khadija and Lanfranchi, Vincent (2017) Fast Electro-Mechanical Performance Evaluation Tool For Synchronous Reluctance Machine. International Journal of Precision Engineering and Manufacturing, 18 (11). pp. 1567-1573. ISSN 2234-7593 (Print); 2005-4602 (Online). (Published)

Mohd Azri Hizami, Rasid and Nurul Fatimah, Abdullah and Mohmad Sairaji, Muhamad Imran and A. R., Razali and Mohamad Heerwan, Peeie and Muhammad Izhar, Ishak and Ospina, Alejandro and Lanfranchi, Vincent (2018) Preliminary thermal evaluation of actuator for steer-by-wire vehicle. IEEE Transactions on Vehicular Technology, 67 (12). pp. 11468-11474. ISSN 0018-9545. (Published)

Mohd Fadhlan, Mohd Yusof and M., Ishak and M. F., Ghazali (2020) Weld depth estimation during pulse mode laser welding process by the analysis of the acquired sound using feature extraction analysis and artificial neural network. Journal of Manufacturing Processes. pp. 1-16. ISSN 1526-6125. (In Press / Online First) (In Press / Online First)

Mohd Fadzil, Abdul Rahim and Zahari, Taha and Rizalman, Mamat (2017) Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method. IOP Conference Series: Materials Science and Engineering, 257. pp. 1-21. ISSN 1757-8981 (Printed); 1757-899X(Online). (Published)

Mohd Fadzil, Rahim and Abdul Aziz, Jaafar and Rizalman, Mamat and Zahari, Taha Performance assessment of direct injection compressed natural gas vehicle at different injection pressures using speed-sweep test method. Materials Science and Engineering, Volume 788 (012068). ISSN 1757-899X. (Published)

Mohd Fahmi, Othman and Abdul Adam, Abdullah and G., Najafi and R., Mamat (2017) Green Fuel as Alternative Fuel for Diesel Engine: A Review. Renewable and Sustainable Energy Reviews, 80. pp. 694-709. ISSN 1364-0321. (Published)

Mohd Farid, Ismail and Wan Azmi, Wan Hamzah and Rizalman, Mamat and Sharma, Korada Viswanatha and Nurul Nadia, Mohd Zawawi (2023) Stability assessment of polyvinyl-ether-based TiO2, SiO2 and their hybrid nanolubricants. Lubricants, 11 (23). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat (2022) Comparison of Preparation Methods Effect on the Stability of Compressor oil-based Nanolubricant. Journal of Advanced Research in Applied Mechanics, 91 (1). pp. 1-6. ISSN 2289-7895. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Hafiz Muhammad, Ali (2023) Thermal and tribological properties enhancement of PVE lubricant modiﬁed with SiO2 and tio2 nanoparticles additive. Nanomaterials, 13 (42). pp. 1-18. ISSN 2079-4991. (Published)

Mohd Farid, Ismail and Wan Hamzah, Azmi and Rizalman, Mamat and Sharma, Korada Viswanatha and Ali, Hafiz Muhammad (2023) Extensive stability assessment of tio/polyvinyl ether nanolubricant with physical homogenization. Lubricants, 11 (67). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin and Mohd Kamal, Kamaruzzaman (2020) Cyclic pressure variations in a small diesel engine fueled with biodiesel and antioxidant blends. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7851 -7857. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Hasnun Ariff, Hassan and Tan, F. Y. and M. A., Abdullah and N. Q., Radzuan and K. A., Abu Kassim (2020) Does a circular convex blind spot mirror increase the driver’s field of view? Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 44-49. ISSN 2550-2239. (Published)

Mohd Hilmy Naim, Mohd Yakin and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim and Nik Abdullah, Nik Mohamed (2023) A new quasi-brittle damage model implemented under quasi-static condition using bond-based peridynamics theory for progressive failure. Theoretical and Applied Mechanics, 50 (1). 73 -102. ISSN 1450-5584. (Published)

Mohd Hilmy Naim, Mohd Yakin and Nik Mohamed, Nik Abdullah and Mohd Ruzaimi, Mat Rejab and Nur A., Hashim (2022) 1D peridynamics subjected to quasi-static load with adaptive dynamic relaxation. Journal of Engineering and Technology (JET). pp. 1-4. ISSN 2180-3811. (In Press / Online First) (In Press / Online First)

Mohd Kamal, Kamaruzzaman and Abdul Adam, Abdullah (2020) Multi-objective optimization of diesel engine performances and exhaust emissions characteristics of Hermetia illucens larvae oil-diesel fuel blends using response surface methodology. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 1-2. ISSN 1556-7036 (Print); 1556-7230 (Online). (In Press / Online First) (In Press / Online First)

Mohd Kamal, Kamaruzzaman and Hafiz, M. and Abdullah, Adam and Ang, F. Chen and Awad, Omar I. (2019) Combustion, performances and emissions characteristics of black soldier fly larvae oil and diesel blends in compression ignition engine. Renewable Energy, 142. pp. 569-580. ISSN 0960-1481. (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli (2021) Performance characteristics of a small poppet valve crankshaft engine in free-piston engine mode. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 9149 -9157. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2020) Flexible valve timing strategies for boosting a small four-stroke spark ignition engine performance. Small Engine Technology Conference & Exposition (SETC2019). pp. 1-8. ISSN 2019-32-0591. (Published)

Mohd Yusoof, M. Y. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Md Yasir, A. S. H. (2023) The assessment of man and method toward the assembly line improvement in automotive manufacturing. Journal of Modern Manufacturing Systems and Technology (JMMST), 7 (1). pp. 7-14. ISSN 2636-9575. (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hafiz, Muhammad Ali (2023) Viscosity and friction reduction of double end capped polyalkylene glycol nanolubricants for eco friendly refrigerant. Lubricants, 11 (129). pp. 1-17. ISSN 2075-4442 (Online). (Published)

Mohd Zaki, Sharif and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Nurul Nadia, Mohd Zawawi and Hendrawati, Tri Yuni (2023) Stability and thermal conductivity of mono and hybrid nanoparticles dispersion in double-end capped pag lubricant. Lubricants, 11 (1). pp. 1-18. ISSN 2075-4442 (Online). (Published)

Mohd. Herzwan, Hamzah and Azri, Alias (2022) Heat Generation Inside Turbocharger Without External Heat Source. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 100 (2). pp. 47-59. ISSN 2289-7879. (Published)

Muhamad Norkhizan, Abdullah and Ahmad Fitri, Yusop and Rizalman, Mamat and Mohd Adnin, Hamidi and Sudhakar, Kumarasamy and Yusaf, Talal (2023) Sustainable biofuels from first three alcohol families : A critical review. Energies, 16 (648). pp. 1-21. ISSN 1996-1073. (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Mat Uzir, Wahit and Nurhadiyanto, Didik (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material conﬁnement. Polymers, 15 (817). pp. 1-19. ISSN 2073-4360. (Published)

Muhammad Aminuddin, Pi Remli and M. F., Ghazali and Azmi, W. H. and Hanafi, M. Yusop (2021) Transient-based leak detection and monitoring of water pipes using complementary ensemble empirical mode decomposition (CEEMD) method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 135-148. ISSN 2289-7879. (Published)

Muhammad Amirul Azwan, Azmi and Amir, Abdul Razak and Muhammad Amir Syahiran, Muhammad Tarminzi and Ahmad Fadzil, Sharol and Ahmmad Shukrie, Md Yudin and Zafri Azran, Abdul Majid (2023) Hydrodynamics investigations of kaffir lime leaves drying in a swirling solar drying chamber with inclined slotted angle air distributor. CFD Letters, 15 (2). pp. 1-16. ISSN 2180-1363. (Published)

Muhammad Faisal, Hashim and Norazlianie, Sazali and Zawati, Harun and Norsuhailizah, Sazali and Wan Norharyati, Wan Salleh and Triyanda, Gunawan (2023) Analysis study of the carbon monoxide sensor for vehicle safety system application. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Muhammad Khairol Annuar, Zaini and Lee, Yen-Sian and Nurazima, Ismail and Lim, Kok-Sing and Udos, Waldo and Mohd Hafizi, Zohari and Yang, Hang-Zhou and Harith, Ahmad (2019) In-fiber Fabry Perot interferometer with narrow interference fringes for enhanced sensitivity in elastic wave detection. Optical Fiber Technology, 53. pp. 1-2. ISSN 1068-5200. (Published)

Muller, Dario Cyril and Selvanathan, Shanmuga Priya and Cuce, Erdem and Kumarasamy, Sudhakar (2023) Hybrid solar, wind, and energy storage system for a sustainable campus : A simulation study. Science and Technology for Energy Transition (STET), 78 (13). pp. 1-12. ISSN 2804-7699. (Published)

Munir Afnan, Mukhtar and R. A., Bakar and Mohd Farid, Zainudin (2021) Thermodynamic analysis of a gamma-configuration stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 114-126. ISSN 2289-7879. (Published)

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2020) Computational modal analysis on finite element model of body-in-white structure and its correlation with experimental data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). pp. 7915-7926. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh and Nurulakmar, Abu Husain (2020) A review on crashworthiness studies of crash box structure. Thin-Walled Structures, 153 (106795). pp. 1-16. ISSN 0263-8231. (Published)

Najafi Khaboshan, Hasan and Jaliliantabar, F. and Abdullah, A. A. and Panchal, Satyam (2023) Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system. Applied Thermal Engineering, 227 (120320). pp. 1-12. ISSN 1359-4311. (Published)

Najaﬁ, G. and Ghobadian, B. and Moosavian, A. and Yusaf, T. and R., Mamat and M., Kettner and Azmi, W. H. (2016) SVM and ANFIS for Prediction of Performance and Exhaust Emissions of a SI Engine with Gasoline–Ethanol Blended Fuels. Applied Thermal Engineering, 95. pp. 186-203. ISSN 1359-4311. (Published)

Naseer, Abqaat and Faiz, Ahmad and Aslam, Muhammad and Beh, Hoe Guan and Wan Sharuzi, Wan Harun and Norhamidi, Muhamad and Muhammad Rafi, Raza and German, Randall M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 1042-6914 (print), 1532-2475 (online). (Published)

Nelfiyanti, . and N. M. Zuki, N. M. and M. F. F., Ab Rashid (2022) Analysis of measurement and calculation of MSD complaint of chassis assembly workers using OWAS, RULA and REBA method. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (2). 9681 -9692. ISSN 2180-1606. (Published)

Nor Aziyatul Izni, Mohd Rosli and Sarah ‘Atifah, Saruchi and Nur Ilyana Ismarau, Tajuddin and Puvarasan, Ulaganathan and Gurpreet Singh, Awtar Singh and Nurul Azhani, Yunus (2023) Analysis of stock market reaction in Malaysia during Covid-19 pandemic via ARIMA. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 5 (1). pp. 1-12. ISSN 2637-0883. (Published)

Nur A. A., Rahman and Mohd Aminudin, Jamlos and Mohd Faizal, Jamlos and Soh, Ping J. and Norfatihah, Bahari and Hossain, Toufiq M. (2020) Compact bidirectional circularly polarized dedicated short range communication antenna for on‐board unit vehicle‐to‐everything applications. International Journal of RF and Microwave Computer-Aided Engineering, 30 (5). pp. 1-2. ISSN 1096-4290. (Published)

Nur Syahilia Syahira, Safie and Muhamad Nasir, Murad and Lih, Tan Chye and Azwan Iskandar, Azmi and Wan Azmi, Wan Hamzah and Mohd, Danish (2022) Roles of eco-friendly non-edible vegetable oils in drilling inconel 718 through minimum quantity lubrication. Lubricants, 10 (211). pp. 1-20. ISSN 2075-4442 (Online). (Published)

Nurazima, Ismail and Z. M., Hafizi and Ooi, Cheong-Weng and Muhammad Khairol Annuar, Zaini and Che Ku Eddy Nizwan, Che Ku Husin and Lim, Kok-Sing and Harith, Ahmad (2020) Fiber bragg grating-based fabry-perot interferometer sensor for damage detection on thin aluminum plate. IEEE Sensors Journal, 20 (7). pp. 3564-3571. ISSN 1530-437X. (Published)

Nurhanis Sofiah, Abd Ghafar and Pasupuleti, Jagadeesh and Samykano, Mahendran and Kadirgama, Kumaran and Koh, Siaw Paw and Tiong, Sieh Kieh and Pandey, Adarsh Kumar and Yaw, Chong Tak and Natarajan, Sendhil Kumar (2023) Harnessing nature’s ingenuity: A comprehensive exploration of nanocellulose from production to cutting-edge applications in engineering and sciences. Polymers, 15 (3044). pp. 1-42. ISSN 2073-4360. (Published)

Nurul, Izzati and Sheikh Ahmad, Zaki and Rijal, Hom Bahadur and Rey, Jorge Alfredo Ardila and Hagishima, Aya and Nurizzatul Atikha, Rahmat (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students’ activity rooms in a university building in malaysia. Buildings, 13 (36). pp. 1-25. ISSN 2075-5309. (Published)

Pandey, Ashutosh K. and Kalidasan, B. and Reji Kumar, Rajamony and Rahman, Saidur and Tyagi, Vineet Veer and Krismadinata, Krismadinata and Said, Zafar and Salam, P. Abdul and Juanico, Dranreb Earl and Ahamed, Jamal Uddin and Sharma, Kamal and Samykano, Mahendran and Tyagi, S.K. (2022) Solar energy utilization techniques, policies, potentials, progresses, challenges and recommendations in asean countries. Sustainability (Switzerland), 14 (11193). pp. 1-26. ISSN 2071-1050. (Published)

Parvez, M. S. and Rahman, Md Mustafizur and Mahendran, Samykano and Ali, Mohammad Yeakub (2023) Current advances in fabric-based airbag material selection, design and challenges for adoption in futuristic automobile applications. Materials Today: Proceedings. p. 123. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Pi Remli, M. A. and Ghazali, M. F. and Yusof, M. F.M. and Yusop, Muhammad Hanafi and Wai, Sit Kian and Sidek, Sufian and Najafi, G. (2022) Pipeline fault identification using synchrosqueezed wavelet transform based on pressure transient analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 158-171. ISSN 2289 - 7879. (Published)

Prayogo, Wisnu and Siregar, Januar Parlaungan and Soewondo, Prayatni and Nasution, Zulkifli and Hanami, Zarah Arwieny and Ikhwali, M. Faisi and Estim, Abentin and Suryawan, I. Wayan Koko (2023) The investigation on mineral wool performance as a potential filter to remove tss in cikapayang river, east jawa, indonesia. Environment and Natural Resources Journal, 21 (101936). pp. 1-10. ISSN 1686-5456. (Published)

Putri Nur Farhanah, Mohd Shamsuddin and Muhamad Arifpin, Mansor and Roshahliza, M. Ramli and Raja Mariatul Qibtiah, Raja Jaapar (2020) Development of navigation system for unmanned surface vehicle by improving path tracking performance. Journal of Engineering Science and Technology, 15 (2). pp. 1371-1383. ISSN 1823-4690. (Published)

Quanjin, Ma and M. R. M., Rejab and Kang, Shaofu and Idris, Mat Sahat and M.A.A., M. Zin (2020) The energy-absorbing characteristics of single spherical-roof contoured-core (SRCC) cell with composite materials. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (4). pp. 8265-8273. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Quanjin, Ma and M. R. M., Rejab and M. S., Idris and Shukur, Abu Hassan and Manoj Kumar, Nallapaneni (2020) Effect of winding angle on the quasi-static crushing behaviour of thin-walled carbon fibre-reinforced polymer tubes. Polymers and Polymer Composites, 28 (7). pp. 462-472. ISSN 0967-3911. (Published)

R., A. Bakar and Widudo, . and K., Kadirgama and D., Ramasamy and Yusaf, Talal and M. K., Kamarulzaman and Sivaraos, . and Aslfattahi, Navid and Samylingam, L. and Alwayzy, Sadam H. (2022) Experimental analysis on the performance, combustion/emission characteristics of a DI diesel engine using hydrogen in dual fuel mode. International Journal of Hydrogen Energy. pp. 1-18. ISSN 0360-3199. (In Press / Online First) (In Press / Online First)

Ramkiran, B. and Sundarabalan CK, C. K. and Sudhakar, K. (2021) Sustainable passive cooling strategy for PV module: A comparative analysis. Case Studies in Thermal Engineering, 27 (101317). pp. 1-10. ISSN 2214-157X. (Published)

Rao, N.T. and Oumer, A. N. and Noor, M. M. and Kadirgama, K. and Basrawi, F. and Siregar, J. P. (2023) Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology. Australian Journal of Mechanical Engineering, 21 (3). pp. 894-910. ISSN 1448-4846. (Submitted) (Submitted)

Romli, N. K. and Rejab, M. R. M. and Jiang, X. X. and Soffie, S. M. and Ishak, M. (2022) Mechanical response of galvanised steel sandwich structure with different numbers of web core and different spacing distance of web plate under bending load. Journal of Mechanical Engineering and Sciences (JMES), 16 (4). 9289 -9306. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Rosli, Danial N. and Rasid, Mohd Azri Hizami (2022) Modal analysis of an 8/6 pole switched reluctance motor core with different materials and assembly method using FEA. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 40-47. ISSN 2637-0883. (Published)

Rosli, M. Arif Fikri and Pandey, A. K. and Samykano, M. and Kadirgama, K. and George, Mathew and Saidur, R. and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Sharma, Kamal and Tyagi, V. V. (2022) Thermal conductivity, reliability, and stability assessment of phase change material (PCM) doped with functionalized multi-wall carbon nanotubes (FMWCNTs). Journal of Energy Storage, 50 (104676). pp. 1-11. ISSN 2352-152X. (Published)

Rosli, M. Arif Fikri and Samykano, M. and Pandey, A. K. and Kadirgama, K. and Reji Kumar, R. and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Tyagi, V. V. and Sharma, Kamal and Saidur, R. (2022) Recent progresses and challenges in cooling techniques of concentrated photovoltaic thermal system: A review with special treatment on phase change materials (PCMs) based cooling. Solar Energy Materials and Solar Cells, 241 (111739). pp. 1-33. ISSN 0927-0248. (Published)

Rosmazi, Rosli and Zamri, Mohamed and Priyandoko, G. (2021) Semi active seat suspension system using modified intelligent active force control. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8498 -8504. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S., Sreenath and K., Sudhakar and A. F., Yusop (2020) Solar photovoltaics in airport: Risk assessment and mitigation strategies. Environmental Impact Assessment Review, 84 (106418). pp. 1-11. ISSN 0195-9255. (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S.Y., Lam and N. H., Shuaib and H., Hasini and N. A., Shuaib (2012) Computational Fluid Dynamics Investigation on the use of Heat Shields for Thermal Management in a Car Underhood. International Journal of Automotive and Mechanical Engineering (IJAME), 6. pp. 785-796. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Salikandi, Mohammad and Ranjbar, Benyamin and Shirkhan, Elahe and Priya, S. Shanmuga and Thirunavukkarasu, I. and Sudhakar, K. (2020) Recent trends in liquid desiccant materials and cooling systems : application, performance and regeneration characteristics. Journal of Building Engineering, 33 (101579). pp. 1-15. ISSN 2352-7102. (Published)

Samani, Marziyeh Ansari and Samani, Bahram Hosseinzdeh and Lotfalian, Amin and Rostami, Sajad and Najafi, Gholamhassan and Fayyazi, Ebrahim and R., Mamat (2020) The feasibility and optimization of biodiesel production from Celtis australis L. oil using chicken bone catalyst and ultrasonic waves. Biofuels, 11 (4). pp. 513-521. ISSN 1759-7269(Print); 1759-7277(Online). (Published)

Samykano, Mahendran and Selvamani, Sathish Kumar and K., Kadirgama and W. K., Ngui and Kanagaraj, G. and K., Sudhakar (2019) Mechanical property of FDM printed ABS : influence of printing parameters. International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 2779-2796. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Praja, Arief Kusuma Among (2023) Project delivery systems : The partnering concept in integrated and non-integrated construction projects. Sustainability (Switzerland), 15 (86). pp. 1-14. ISSN 2071-1050. (Published)

Sari, Endah Murtiana and Irawan, Agustinus Purna and Wibowo, Mochamad Agung and Siregar, Januar Parlaungan and Tamin, Rizal Zainuddin and Praja, Arief Kusuma Among and Dewi, Maya Puspita (2023) Challenge and awareness for implemented integrated project delivery (IPD) in indonesian projects. Buildings, 13 (262). pp. 1-13. ISSN 2075-5309. (Published)

Shamsu Anuar, Mohamad Aqil and Mansor, M. A. (2022) Application of value stream mapping in the automotive industry: A case study. Journal of Modern Manufacturing Systems and Technology (JMMST), 6 (2). pp. 34-41. ISSN 2636-9575. (Published)

Shanono, Ibrahim Haruna and Muhammad, Aisha (2021) Hybrid electric vehicles: a mini overview. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 27-36. ISSN 2636-9575. (Published)

Shehzad, Aamir and Ahmed, Arslan and Quazi, M. M. and Jamshaid, Muhammad and Ashrafur Rahman, S. M. and Masjuki, Haji Hassan and Muhammad Asif Javed, Hafiz (2021) Current research and development status of corrosion behavior of automotive materials in biofuels. Energies, 14 (5). pp. 1-36. ISSN 1996-1073. (Published)

Siti Faqihah, Roduan and Juyana, A. Wahab and Mohd Arif Anuar, Mohd Salleh and Nurul Aida Husna, Mohd Mahayuddin and Mohd Mustafa, Al Bakri Abdullah and Aiman, Mohd Halil and Amira Qistina Syamimi, Zaifuddin and Mahadzir, Ishak and Sandu, Andrei Victor and Baltatu, Mădălina Simona and Vizureanu, Petrica (2023) Effectiveness of dimple microtextured copper substrate on performance of Sn-0.7Cu solder alloy. Materials, 16 (96). pp. 1-14. ISSN 1996-1944. (Published)

Smallbone, Andrew and Mohd Razali, Hanipah and Jia, Boru and Scott, Tim and Heslop, Jonathan and Towell, Ben and Lawrence, Christopher and Roy, Sumit and Shivaprasad, K. V. and Roskilly, Antony Paul (2020) Realization of a novel free-piston engine generator for hybrid-electric vehicle applications. Energy & Fuels, 34 (10). pp. 12926-12939. ISSN 0887-0624. (Published)

Solechan, Solechan and Suprihanto, Agus and Widyanto, Susilo Adi and Triyono, Joko and Fitriyana, Deni Fajar and Siregar, Januar Parlaungan and Cionita, Tezara (2023) Characterization of PLA/PCL/Nano-Hydroxyapatite (nHA) biocomposites prepared via cold isostatic pressing. Polymers, 15 (559). pp. 1-17. ISSN 2073-4360. (Published)

Solomin, Evgeny and Sirotkin, Evgeny and Cuce, Erdem and Selvanathan, Shanmuga Priya and Sudhakar, K. (2021) Hybrid floating solar plant designs: A review. Energies, 14 (10). pp. 1-25. ISSN 1996-1073. (Published)

Sreenath, S. and Azlin, Mohd Azmi and Nofri Yenita, Dahlan and Sudhakar, Kumarasamy (2022) A decade of solar PV deployment in ASEAN : Policy landscape and recommendations. Energy Reports, 8. pp. 460-469. ISSN 2352-4847. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2020) Technical assessment of captive solar power plant: A case study of Senai Airport, Malaysia. Renewable Energy, 152. pp. 849-866. ISSN 0960-1481. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop and Cuce, Erdem and Solomin, Evgeny (2019) Analysis of solar PV glare in airport environment: Potential solutions. Results in Engineering, 5 (100079). pp. 1-5. ISSN 2590-1230. (Published)

Suhaimi, Mohd Daud and M. S., Najib and Nurdiyana, Zahed and Mohd Falfazli, Mat Jusof and Muhammad Firdaus, Che Jusoh@Yusoff and Muhammad Izzat Izzuddin Nai’mullah, Hassim (2017) Classification of Lubricant Oil Adulteration Level using Case-Based Reasoning. Journal of Fundamental and Applied Sciences, 9 (4S). pp. 256-275. ISSN 1112-9867. (Published)

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

Sundarajoo, Suresh and Ahmad Shahrizan, Abdul Ghani (2018) Improvement of Auto-Tracking Mobile Robot based on HSI Color Model. Indonesian Journal of Electrical Engineering and Computer Science, 12 (3). pp. 1349-1357. ISSN 2502-4752. (Published)

Taha, Zahraa Khduair and Yaw, Chong Tak and Koh, Siaw Paw and Tiong, Sieh Kiong and Kadirgama, Kumaran and Benedict, Foo and Tan, Jian Ding and Balasubramaniam, Yogendra A.L. (2023) A survey of federated learning from data perspective in the healthcare domain : Challenges, methods, and future directions. IEEE Access, 11. pp. 45711-45735. ISSN 2169-3536. (Published)

Thor, Wei Soon and M. Nafis, O. Z. (2022) Investigation of accuracy and response time in GPS-based car mileage monitoring device. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (1). pp. 42-49. ISSN 2637-0883. (Published)

Veerendra, A. S. and Mohd Rusllim, Mohamed and M. H., Sulaiman and Peddakapu, K. and Sudhakar, K. and Sukumaran, Sreenath (2019) Speed regulation enhancement for SRM drive in PHEV applications by using hybrid fuzzy logic controller. International Journal of Recent Technology and Engineering, 8 (2). pp. 526-533. ISSN 2277-3878. (Published)

Veerendra, A. S. and Mohd Rusllim, Mohamed and Mohd Herwan, Sulaiman and Sudhakar, K. and Peddakapu, K. (2020) Modelling and simulation of dual sourced front-end converter for hybrid electric vehicles. International Journal of Ambient Energy. pp. 1-9. ISSN 0143-0750 (Print); 2162-8246 (Online). (In Press / Online First) (In Press / Online First)

Vignesh, P. and Jayaseelan, Veerasundram and Pugazhendiran, P. and Prakash, M. Sathya and Sudhakar, Kumarasamy (2022) Nature-inspired nano-additives for Biofuel application – A Review. Chemical Engineering Journal Advances, 12 (100360). pp. 1-13. ISSN 2666-8211. (Published)

Vignesh, Palani and Pradeep Kumar, A. R. and Ganesh, N. S. and Jayaseelan, V. and Sudhakar, K. (2021) Biodiesel and green diesel generation: An overview. Oil and Gas Science and Technology, 76 (6). pp. 1-15. ISSN 1294-4475. (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Athikary, B. and M. S. M., Sani (2020) Correlating finite element model of a car spot-welded front-end module in the light of modal testing data. International Journal of Automotive and Mechanical Engineering (IJAME), 17 (2). 7974 -7984. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Ayub, M. A. and M. S. M., Sani and M. S., Mohd Zin (2019) Frequency based substructuring for structure with double bolted joints : a case study. International Journal of Automotive and Mechanical Engineering (IJAME), 16 (1). pp. 6188-6199. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Wan Nur Azhani, Wan Samsudin and Mohd Harizan, Zul and Mohd Zamri, Ibrahim and Rohana, Abdul Karim (2022) Kelulut honey-filled pots detection using image processing based techniques. Indonesian Journal of Electrical Engineering and Computer Science, 28 (2). pp. 1028-1036. ISSN 2502-4752. (Published)

Yap, Suk Wy and Norhasnidawani, Johari and Saiful Amri, Mazlan and Aqida, S. N. and Arifin, Rizal and Noor Azlina, Hassan and Mohd Aidy Faizal, Johari (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854. (Published)

Yaw, Chong Tak and Koh, S. P. and Sandhya, Madderla and Kadirgama, Kumaran and Tiong, Sieh Kiong and Ramasamy, Devarajan and Sudhakar, Kumarasamy and Samykano, Mahendran and Benedict, F. and Tan, Chung Hong (2023) Heat transfer enhancement by hybrid nano additives—Graphene nanoplatelets/cellulose nanocrystal for the automobile cooling system (Radiator). Nanomaterials, 13 (808). pp. 1-28. ISSN 2079-4991. (Published)

Yaw, Chong Tak and Koh, Siaw Paw and Sandhya, Madderla and Ramasamy, Devarajan and Kadirgama, Kumaran and Benedict, Foo and Kharuddin, Ali and Tiong, Sieh Kiong and Abdalla, Ahmed N. and Chong, Kok Hen (2023) An Approach for the optimization of thermal conductivity and viscosity of hybrid (Graphene Nanoplatelets, GNPs : Cellulose Nanocrystal, CNC) nanoﬂuids using Response Surface Methodology (RSM). Nanomaterials, 13 (1596). pp. 1-18. ISSN 2079-4991. (Published)

Yunus, M. A. and Abdul Rani, M. N. and Aziz Shah, M. A. S. and M. S. M., Sani and Yahya, Z. (2021) The improvement of bolted joints model via finite element model updating method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8635-8643. ISSN 2231-8380 (online). (Published)

Yusaf, Talal and Mahamude, Abu Shadate Faisal and Farhana, Kaniz and Wan Sharuzi, Wan Harun and Kadirgama, Kumaran and Ramasamy, Devarajan and Mohd Kamal, Kamarulzaman and Subramonian, Sivarao and Hall, Steve and Dhahad, Hayder Abed (2022) A comprehensive review on graphene nanoparticles : Preparation, properties, and applications. Sustainability (Switzerland), 14 (12336). pp. 1-32. ISSN 2071-1050. (Published)

Yusof, M. F.M. and Quazi, M. M. and Aleem, S.A.A. and Ishak, M. and Ghazali, M. F. (2023) Identification of weld defect through the application of denoising method to the sound signal acquired during pulse mode laser welding. Welding in the World, 67 (5). pp. 1267-1281. ISSN 00432288. (Published)

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Mustapah, M. M. and Nelfiyanti, . (2022) The effect of the supply chain in the quick response manufacturing (QRM) environment in the automotive industry. Procedia Computer Science, 207. pp. 2116-2124. ISSN 1877-0509. (Published)

Zainah, Md. Zain and Nurfadzillah, Harun and Nur Natasha, Hanipah and Norhafizah, Md. Zain (2017) Backstepping and sliding-mode methods for stabilizing an underactuated X4-AUV. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 1-7. ISSN 2180-1843 (Print); 2289-8131 (Online). (Published)

Zainordin, A. Z. and Zamri, Mohamed and F., Ahmad (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8577 -8584. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zolpakar, N. A. and Mohd Fuad, Yasak and Pathak, Sunil (2021) A review: Use of evolutionary algorithm for optimisation of machining parameters. International Journal of Advanced Manufacturing Technology, 115 (1-2). 31 -47. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Zul, M. H. and Ishak, M. and Nasir, R. M. and Aiman, M. H. and Quazi, M. M. (2023) Effect of laser-textured surface of Ti6Al4V on frictional wear behavior. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (1). pp. 10165-10174. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zulkifli, Aidisyahrul Hanif and Mohd Khairuddin, Ismail and Anwar, P. P. Abdul Majeed and Mohd Razman, Mohd Azraai and Abdullah, Muhammad Amirul and Mohd Isa, Wan Hasbullah (2022) Virtual driving simulation for pedal error study. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 4 (2). pp. 24-31. ISSN 2637-0883. (Published)

Zurghiba, Hizanorhuda and Kadirgama, Kumaran and Norazlianie, Sazali and Muhamad, Mat Noor and Rosli, Abu Bakar and Subramonian, Sivarao and Talal, Yusaf and Yaw, Chong Tak and Paw, Koh Siaw and Kiong, Tiong Sieh and Foo, Benedict (2023) Enhancing Heat Transfer in Compact Automotive Engines using Hybrid Nano Coolants. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943. (Published)

Book

Addie Irawan, Hashim and et, al. (2015) Proceeding of Colloquium on Robotics, Unmanned Systems and Cybernetics 2014. Penerbit Universiti Malaysia Pahang, Kuantan, Pahang, Malaysia. ISBN 978-967-0691-42-8

Ahmad Shahrizan, Abdul Ghani and Ismail Mohd., Khairuddin and Muhammad Amirul, Abdullah and Ahmad Fakhri, Ab. Nasir and Jessnor Arif, Mat Jizat and Mohd. Azraai, Mohd. Razman and Muhammad Aizzat, Zakaria and Wan Hasbullah, Mat Isa and Anwar P. P., Abdul Majeed (2022) Enabling Industry 4.0 through Advances in Mechatronics. LNEE, 1 (1). Springer Singapore, Springer Link. ISBN 1876-1100

Book Chapter

Ma, Quanjin and Rejab, M. R. M. and Hanon, Muammel M. and Idris, Mat Sahat and Siregar, J. P. (2021) 3D-Printed Spherical-Roof Contoured-Core (SRCC) composite sandwich structures for aerospace applications. In: High-Performance Composite Structures. Composites Science and Technology . Springer, Singapore, pp. 75-91. ISBN 978-981-16-7377-1

Mohd Hilmy Naim, Mohd Yakin and Nik Abdullah, Nik Mohamed and Mohd Ruzaimi, Mat Rejab (2022) Effect of particle discretization and horizon size on the displacement and damage plot using bond-based peridynamics. In: Technological Advancement in Mechanical and Automotive Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore, 881 -897. ISBN 978-981-19-1456-0

Muhammad Fadhlan, Afif Bin Nazri and Muhammad Ikram, Mohd Rashid and Mohd Rashid (2018) Simultaneous perturbation stochastic approximation optimization for energy management strategy of HEV. In: Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018. Lecture Notes in Electrical Engineering . Springer Singapore, Singapore, pp. 361-368. ISBN 978-981-13-3708-6

Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4

Samylingam, Lingenthiran and Kadirgama,, Kumaran and Aslfattahi, Navid and Samykano, M. (2022) Comparison of physical properties enhancement in various heat transfer nanofluids by MXene. In: Advances in Nanofluid Heat Transfer. Elsevier, Saudi Arabia, pp. 131-150. ISBN 9780323886420 (Printed) 9780323886567 (Online)

Bulletin

Abdul Adam, Abdullah and Raja Allen Jordan Izzuddin Shah, Raja Baharudin (2014) AEC Pengerak Industri Automotif. CREATE . pp. 26-27. ISSN 1823-7487

Danial, Mohamed (2014) Noise source identification. Auto Inexss (7). ISSN 1985-8434

Mohd Hafiz, Mohd Hassin (2011) Affective computing in automotive industry. Bit@FSKKP . ISSN 1985-7969

Norul Fadilah, Abdullah (2012) Jengking juarai Shell Eco-Marathon Asia 2012. CREATE . p. 38. ISSN 1823-7487

Syarifah Ikhmar Afzan, Syed Abd. Rahman (2014) AEC, CPPTS jalin kerjasama kursus pengendalian kenderaan. CREATE . p. 28. ISSN 1823-7487

UMP, PNC ICMER discusses issues in mechanical and automotive engineering. Pekan Review, 5 . p. 46. ISSN 2180-3099

UMP, PNC MAI, UMP to produce more than 5,600 local automotive engineers in various dicipline by 2015. Pekan Review, 3 . pp. 32-33. ISSN 2180-3099

UMP, PNC Perodua contributes RM2.6m worth of robots to UMP. Pekan Review, 1 . pp. 20-21. ISSN 2180-3099

UMP, PNC Solar car ‘Kilau’ criss-crossed Australia. Pekan Review, 5 . p. 37. ISSN 2180-3099

UMP, PNC Sports engineering to push forward sports industry in Malaysia. Pekan Review, 7 . pp. 22-23. ISSN 2180-3099

UMP, PNC (2012) Tun Mahathir terima Anugerah Ijazah Kehormat Doktor Kejuruteraan Automotif. CREATE . p. 6. ISSN 1823-7487

UMP, PNC UMP forges cooperation with HsKA and Mercedes benz in automotive engineering. Pekan Review, 5 . p. 49. ISSN 2180-3099 (Unpublished)

UMP, PNC UMP graduates selected to pioneer aerospace industry. Pekan Review, 3 . pp. 40-41. ISSN 2180-3099

UMP, PNC (2013) UMP jalin kerjasama dengan Mercedez Benz. CREATE . p. 42. ISSN 1823-7487

UMP, PNC (2014) UMP, HsKA dan Mercedez Benz jalin kerjasama dalam bidang Kejuruteraan Automotif. CREATE . pp. 28-29. ISSN 1823-7487

Zahari, Taha (2014) Tun Mahathir penggerak Industri Automotif Negara. CREATE . pp. 10-11. ISSN 1823-7487

Zuryaty, Zol (2013) FKP bantu sekolah kluster berentap ke pertandingan antarabangsa F1. CREATE . p. 22. ISSN 1823-7487

Conference or Workshop Item

A. M., Aizzuddin and Danial Shafiq, Mohd Rashid and Mohd Yusof, Taib and Wan Azmi, Wan Hamzah (2022) Simulation of the ground heat exchanger under malaysian environment based on different thermal conductivity of soil and pipe materials. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 155..

Ab Rahim, M. F. and Jaafar, A. A. and Taha, Z. and Rizalman, Mamat (2020) Simulation study on the effect of fuel injection and air intake boundary setup on the brake torque response by using comprehensive vehicle model for natural gas vehicle (NGV). In: IOP Conference Series: Materials Science and Engineering; 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019, 1 - 2 October 2019 , Kuantan. pp. 1-10., 863 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Abbas, Abdul Wahab and Mohd Azri Hizami, Rasid (2020) Characterization of brushed DC motor with brush fault using thermal assessment. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30-31 July 2019 , Kuantan. pp. 1-10., 788 (012095). ISSN 1757-8981

Abdullah, N. A. Z. and Brapakaran, P. and M. S. M., Sani and Marcel, M. W. and Agung, E. H. (2020) Investigation on the dynamic properties of propeller structure with different number of blades. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology, 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-11., 807 (012035). ISSN 1757-8981 (Print), 1757-899X (Online)

Ahmad Rasdan, Ismail (2010) Biomechanics Analysis And Optimization Of Instep Kicking: A Case Study To Malaysian Footballer. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010), 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Alenezi, R. A. and Norkhizan, A. M. and Rani, H. A. and Maulana, M. I. and Yasar, M. (2019) An experimental investigation of a diesel engine using carbon nanotubes blended with biodiesel. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012048). ISSN 1757-8981 (Print), 1757-899X (Online)

Amira Qistina Syamimi, Zaifuddin and Aiman, Mohd Halil and Quazi, Moinuddin Mohammed and Muhammad Izhar, Ishak (2021) Enhancement of laser absorptivity in metal by laser surface modification. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Mohamad Heerwan, Peeie and Ahmad Fakhri, Ab. Nasir and Muhammad Izhar, Ishak (2021) Estimation of electric vehicle turning radius through machine learning for roundabout cornering. In: 19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021, 23-25 November 2021 , Kota Kinabalu, Sabah. 329 -332.. ISSN 2643-2447 ISBN 978-1-6654-0193-7

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Mohamad Heerwan, Peeie and Papaioannou, Gerogious (2022) Investigating vehicle characteristics behaviour for roundabout cornering. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021 , Gambang, Kuantan. 519 -528., 900. ISSN 1876-1100 ISBN 978-981192094-3

Azizuddin, Abd Aziz and Sumiyoshi, Daisuke and Akashi, Yasunori (2018) Design procedure for dual air handling unit of air-conditioning system. In: MATEC Web of Conferences; 2018 UTP-UMP-VIT Symposium on Energy Systems, SES 2018, 18 - 19 September 2018 , Tamil Nadu, India. pp. 1-7., 225 (04016). ISSN 2261-236X

Azrin, Abdul Aziz and Muhammad Yusri, Ismail (2021) Spark plug fault recognition using classification method in a spark ignition engine. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Brapakaran, Paranitharan and Abdullah, N. A. Z. and M. Fouzi, S. M. and Sani, M. S.M. (2019) Correlation of numerical and experimental analysis for dynamic behaviour of a 3 blade propeller structure. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Selangor. pp. 1-10., 1262 (012019). ISSN 1742-6588

Chew, Wi Kang and Muhammad Aizzat, Zakaria (2020) Rover car outdoor localization for navigation tracking using differential global positioning system estimation. In: SympoSIMM 2019: Intelligent Manufacturing and Mechatronics, 8 July 2019 , Melaka, Malaysia. pp. 535-556.. ISSN 2195-4356 ISBN 9789811395390

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II, 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D. M., Nuruzzaman and Nurizzathanis, Mohamad Kusaseh and Noor Mazni, Ismail and Iqbal, A. K. M. Asif and M. M., Rahman and A., Azhari and Zamzuri, Hamedon and C., Shin Yi (2020) Influence of glass fiber content on tensile properties of polyamide-polypropylene based polymer blend composites. In: Materials Today: Proceedings, 4th Advanced Materials Conference 2018, 27-28 November 2018 , Hilton Kuching Hotel, Kuching, Sarawak. pp. 133-137., 29 (Part 1). ISSN 2214-7853

Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020, 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Daud, R. and M. Z. H., Jantan and Mas Ayu, Hassan and A., Shah (2020) Investigation of fatigue failure performance of ankle implant mobile bearing using finite element method. In: IOP Conference Series: Materials Science and Engineering, 3rd International Conference on Vibration, Sound and System Dynamics (ICVSSD 2019), 1-3 December 2019 , Penang, Malaysia. pp. 1-10., 815 (012016). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah and Leman, A. M. and Muhamad Norkhizan, Abdullah and Mulyadi, L. and Fitri, Khoerunnisa and Sardjono, R. E. and Maulana, M. I. and M. S. M., Sani (2019) Performance of a small diesel engine by experimental and numerical simulation analysis. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-12., 506 (012029). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and M. S. M., Sani and Mahidin, . and M., Zaki and Asep, Kadarohman and Muhibbuddin, . and R. E, Sardjono and Asri, Gani (2021) Experimental investigation on noise and vibrations of biodiesel-butanol blends for diesel engine. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25 - 26 June 2020 , Selangor. pp. 1-8., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Erdiwansyah, . and M. S. M., Sani and R., Mamat and J. M., Zikri and N. F. D., Razak and Munawir, . (2019) Experimental investigation of vibrations and noise characterization for spark ignition engine. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012014). ISSN 1742-6588 (print); 1742-6596 (online)

Faridah, Taju Rahim and Yuserrie, Zainuddin (2016) Study on the Impact of Linkage Capabilities on Technological Competitive Advantage and Firm Performance in the Automotive Industry in Malaysia. In: Proceedings of The National Conference for Postgraduate Research (NCON-PGR 2016), 24-25 September 2016 , Universiti Malaysia Pahang (UMP), Pekan, Pahang. pp. 285-301..

Fatchurrohman, Nanang and Suraya, Sulaiman and S. M., Sapuan and M. K. A., Ariffin and B. T. H. T., Baharuddin (2014) Implementation of Concurrent Engineering and Analytical Network Process In Manufacturing Process and Material Analysis of Metal Matrix Composites Automotive Component. In: Proceedings of the 1st International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2014), 26-27 August 2014 , Swiss Garden Resort & Spa, Kuantan, Pahang. pp. 1-10..

Faturachman, Danny and Shariman, Mustafa and Muswar, Muslim (2013) Indonesian’s Sea Transportation Accident Analysis. In: 2nd International Conference on Technology Management, Business and Entrepreneurship 2013, 4-5 December 2013 , Melaka. pp. 1-8.. (Unpublished)

Fauziah, Zainuddin and Awanis, Romli and Roslina, Mohd Sidek (2007) Sistem Penjejakan Pemasangan Kenderaan Atas Talian Dengan Pendekatan Tepat Pada Masa (Just In Time). In: National Conference on Software Engineering & Computer Systems 2007 (NaCES 2007), 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

Fitriady, Muhammad Arifuddin and Nurizzatul Atikha, Rahmat and Ahmad Faiz, Mohammad (2022) Effect of mesh refinement on vertical and lateral velocity profiles of the wake flow behind a spire based on cfd. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 160..

Ghazali, M. S. M. and Romlay, F. R. M. and Ehsan, A. A. (2022) Development of polymer-based Y-branch symmetric waveguide coupler using soft lithography technique. In: Lecture Notes in Electrical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 , Gambang, Kuantan. 71 -76., 730 (262829). ISSN 1876-1100 ISBN 978-981334596-6

Hamisa, A. H. and Azmi, W. H. and Mohd Yusof, Taib and Sharif, M. Z. and Dahlan, A. A. (2021) Development of automotive air-conditioning system test rig for hybrid electric vehicles. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020, 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-11., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online)

Hamzah, Ahmad and Nur Aqilah, Othman (2016) Fuzzy Logic Based EKF for Mobile Robot Navigation: An Analysis of Different Fuzzy Membership Functions. In: 3rd International Multi-Conference on Artificial Intelligence Technology (M-CAIT 2016) , 23-24 August 2016 , Melaka, Malaysia. pp. 1-8..

Hanafi, M. Yusop and Ghazali, M. F. and Yusof, M. F.M. and Pi Remli, Muhammad Aminuddin and Mohd Sabri, Ahmad Azri Syazwan (2022) Leakage identification based on hydraulic transient analysis. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 37..

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2020) Effect of filler composition on microstructure and mechanical properties of MIG welded AA6061 and AA7075. In: National Conference For Postgraduate Research 2020 (NCON-PGR 2020), 9 December 2020 , Universiti Malaysia Pahang. pp. 147-160.. (Submitted)

Hanon, Muammel M. and Zsidai, László and Ma, Quanjin (2021) Accuracy investigation of 3D printed PLA with various process parameters and different colors. In: Materials Today: Proceedings; 3rd International Conference on Materials Engineering and Science, IConMEAS 2020, 28 - 30 December 2020 , Kuala Lumpur, Malaysia. 3089 -3096., 42 (5). ISSN 2214-7853

Harraz Irfan, Nazaruddin and Mohd Razali, Daud (2021) Current collector-free independent battery railway vehicle. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Hoque, Md. Ikramul and Abdo Qasem, Mohammed Hasan and Parvez, Md. Shohan (2022) Municipal solid waste management in Khulna City Corporation Bangladesh. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 78..

I. M., Zulhilmi and Mohamad Heerwan, Peeie and I. M., Izhar and S. M., Asyraf and R. I. M., Eiman (2018) The investigation of vehicle dynamic behaviour during braking at different speed. In: 3rd International Conference On Design And Manufacturing Engineering (ICDME2018), 16 - 18 July 2018 , Monash University, Melbourne, Australia. pp. 1-11.. (Unpublished)

Ibrahim, Mohammad Sollehudin and Peeie, M. H. (2020) The dynamic behavior investigation of electric power wheelchair during the obstacle avoidance. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012074). ISSN 1757-8981

J. M., Zikri and M. S. M., Sani and Erdiwansyah, . and Ahmad Fitri, Yusop and I., Izzudin and Syazwana, Sapee (2019) Vibration analysis on palm oil methyl ester biodiesel as a fuel with the additional of butanol. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 2-11., 1262 (012012). ISSN 1742-6588 (print); 1742-6596 (online)

Jayabharty, Mogan and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Parameter influence on mechanical properties of ABS; using FDM. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 68..

John Paul, Nadakkal and Kadirgama, Kumaran and Samykano, Mahendran (2022) Thermophysical characterization of paraffin/palmitic acid binary eutectic composite for thermal energy harvesting. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 66..

Krishna Kishore, Dokala Janandra and Mohd Rusllim, Mohamed and Sudhakar, Kumarasamy and Peddakapu, kurukuri and D., Anantha koteswara Rao (2022) A hybrid PEO based maximum power point tracking controller for pv system under partial shading conditions. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 63..

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020), 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online)

M. F., Nabil and W. H., Azmi and K. A., Hamid and R., Mamat (2017) Heat transfer performance of Ti02- Si02 nanofluid in water-ethylene glycol mixture. In: International Conference on Advances in Mechanical Engineering 2017 (ICAME), 16-18 Ogos 2017 , Society of Mechanical Engineering Liveliness, FKM, UiTM. pp. 1-10., 13 (2).

M. H., Sulaiman (2013) Differential Search Algorithm for Economic Dispatch with Valve-Point Effects. In: The 2nd International Conference on Engineering and Applied Science 2013 (ICEAS 2013), 15-17 Mar 2013 , Toshi Center Hotel, Tokyo, Japan. . (Unpublished)

M. N. A. M., Asri and N. A. Z., Abdullah and M. S. M., Fouzi and M. S. M., Sani (2019) Normal mode finite element analysis of aerofoil wing structure with different materials. In: Journal of Physics: Conference Series; 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-9., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

M. S. M., Sani and K. M., Jelani and M. H. M., Razip and N. A., Nazri and Yasar, M. (2019) Dynamics investigation on motorcycle chassis based on Finite Element (FE) modelling and updating. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 Oktober 2018 , UNIVERSITI MALAYSIA PAHANG, PEKAN. pp. 1-10., 469 (1). ISSN 1757-8981

M. S. M., Sani and M. A. F. A., Rahimi and Danial, Mohamed (2019) Sound intensity mapping of two stroke engine by using hemispherical surface coordinate arrangement. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-9., 506 (012060). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z., Azir and W. S. W., Harun and K., Kadirgama (2020) A mechanical property evaluation of Ti6Al4V cellular lattice structures fabricated by selective laser melting. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan, Pahang. pp. 1-12., 788 (012010). ISSN 1757-8981 (Print), 1757-899X (Online)

M. Z. M., Ismail and A. H., Zainal and Nazrul Idzham, Kasim and M. A. F. M., Mukhtar (2019) A mini review: Lean management tools in assembly line at automotive industry. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-12., 469 (012086). ISSN 1757-8981 (Print), 1757-899X (Online)

Ma, Quanjin and Ge, Jia and Mohd Ruzaimi, Mat Rejab and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2021) Fabrication of the carbon ﬁber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020, 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1645-1651., 46 (Part 4). ISSN 2214-7853

Ma, Quanjin and Ge, Jia and Rejab, M. R. M. and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2020) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 , Pekan, Malaysia. 1645 -1651., 46. ISSN 2214-7853

Ma, Quanjin and Rejab, M. R. M. and Idris, Mat Sahat and Merzuki, M.N.M. and Shaoliang, Huang (2020) Compressive properties on the spherical-roof contoured-core cell with different amounts of diamond-shaped notches. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012049). ISSN 1757-8981 (Print), 1757-899X (Online)

Ma, Quanjin and Salim, M. S. A. and Rejab, M. R. M. and Bernhardi, Otto-Ernst and Nasution, Ahmad Yunus (2020) Quasi-static crushing response of square hybrid carbon/aramid tube for automotive crash box application. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6 - 7 March 2020 , Hyderabad, India. 683 -690., 27. ISSN 2214-7853

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2021) Investigation on linear and nonlinear dynamic equation for vehicle model in numerical simulation. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021), 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012010). ISSN 1757-899X

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2019) The effect of parallel steering of a four-wheel drive and fourwheel steer electric vehicle during spinning condition: a numerical simulation. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-11., 469 (012084). ISSN 1757-8981 (Print); 1757-899X (Online)

Maoqi, Li and M. I., Ishak and P. M., Heerwan and Muhammad Aizzat, Zakaria (2022) An Approach to Neutral Steering of a 4WIS Vehicle with Yaw Moment Control. In: Enabling Industry 4.0 through Advances in Mechatronics: selected articles from iM3F 2021, Malaysia, 20 September 2021 , Universiti Malaysia Pahang (UMP). pp. 459-469., 900. ISBN 978-981-19-2095-0

Mawarnie, Ismail and Mohd Ruzaimi, Mat Rejab and Siregar, Januar Parlaungan and Zalinawati, Mohamad and Quanjin, Ma and Mohammed, A. A. (2020) Mechanical properties of hybrid glass ﬁber/rice husk reinforced polymer composite. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6 - 7 March 2020 , Hyderabad, India. pp. 1749-1755., 27 (161490). ISSN 2214-7853

Mohamad Faizal, Ridzwan and Saiful Anwar, Che Ghani and Goyal, A. (2022) Numerical analysis of internal flow in internally cooled cutting tool. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 116..

Mohamad Hafizul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Muhamad Haziq, Mohd Ismail Rodzi and Rosli, Abu Bakar (2018) Effect of Injection Pressure, Injection Duration, and Injection Frequency on Direct Injector’s Mass Flow Rate for Compressed Natural Gas Fuel. In: MATEC Web of Conferences: UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018), 18-19 September 2018 , Universiti Malaysia Pahang. pp. 1-6., 225 (02008). ISSN 2261-236X

Mohd Aufa Hadi, Putera Zaini and Mohd Mawardi, Saari and Nurul A’in, Nadzri and Zulkifly, Aziz (2021) A digital dual-phase lock-in amplifier for MFL and ECT NDT applications. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering, 23 August 2021 , Kuantan, Malaysia. pp. 989-997., 842. ISBN 978-981-16-8689-4

Mohd Azri Hizami, Rasid and Ospina, Alejandro and Benkara, Khadija El Kadri and Lanfranchi, Vincent (2016) A Thermal Study on Small Synchronous Reluctance Machine in Automotive Cycle. In: IEEE 25th International Symposium on Industrial Electronics (ISIE 2016), 8-10 June 2016 , Santa Clara, CA, USA. pp. 1-7.. (Unpublished)

Mohd Fadhlan, Mohd Yusof and Mahadzir, Ishak and Mohd Fairusham, Ghazali (2020) Detection of irregularities on weld bead from the L-Statistic analysis of the acquired sound during pulse mode laser welding process. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30-31 July 2019 , Kuantan. pp. 1-9., 788 (012015). ISSN 1757-8981

Mohd Farid, Zainudin and Rosli, Abu Bakar and Kadirgama, Kumaran and Gan, Leong Ming (2020) Kinematic and thermodynamic operational analysis of rhombic-drive Stirling engine prototype. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-18., 788 (012070). ISSN 1757-8981

Mohd Hafiz, Ali and Abdul Adam, Abdullah and Mohd Hafizil, Mat Yasin (2019) Effect of BHA and BHT antioxidant additives on engine performance and emission of a CI engine fueled with a palm oil methyl ester-diesel fuel blend. In: AIP Conference Proceedings: Proceedings of the 3rd International Conference on Automotive Innovation Green Energy Vehicle: AIGEV 2018, 25-26 July 2018 , Kuantan, Pahang, Malaysia. pp. 1-10., 2059 (020051). ISBN 978-0-7354-1787-8

Mohd Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2018) Diesel engine performance operating with tire derived fuel. In: UTP-UMP-VIT Symposium on Energy Systems, SES 2018, 18-19 September 2018 , Tamil Nadu, India. pp. 1-7., 225. ISSN 2261-236X

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2020) Investigation on the Effect of Multiple Passes in Plain Waterjet Cleaning of Paint. In: iMEC-APCOMS 2019: Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems, 21-22 August 2019 , Putrajaya, Malaysia. pp. 537-543.. ISBN 978-981-15-0949-0

Mohd Razali, Hanipah and A. R., Razali (2017) The numerical assessment of motion strategies for integrated linear motor during starting of a free-piston engine generator. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-9., 257 (012054). ISSN 1757-8981

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2021) A new piston referencing algorithm for qualitative assessment of free-piston engine generator performance. In: Lecture Notes in Mechanical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 , Pekan, Malaysia. pp. 935-948., 46. ISSN 2195-4356

Mohd Sahril, Mohd Fouzi and M. S. M., Sani and M. F. R., Ishak (2019) Identification dynamic behaviour of disc brake based on finite element model updating approach. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012006). ISSN 1742-6588 (print); 1742-6596 (online)

Mohd. Herzwan, Hamzah and Azri, Alias and R., Mamat and Abdul Adam, Abdullah and Sudrajad, Agung and Nur Atiqah, Ramlan and Nur Fauziah, Jaharudin (2019) Performance analysis of diesel engine running with tyre-derived fuel. In: IOP Conference Series: Materials Science and Engineering, 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018 , UMP Library, Pekan. pp. 1-10., 469 (012107). ISSN 1757-8981 (Print), 1757-899X (Online)

Muhamad Asyraf, Shahrom and Mohamad Heerwan, Peeie and Mohamad Izhar, Ishak and Muhammad Zulhilmi, Ismail and Muhammad Solehuddin, Ibrahim (2019) Comparison of braking performance between mechanical and dynamic braking for Electric Powered Wheelchair. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 , UMP Library, Pekan. pp. 1-9., 469 (012104). ISSN 1757-8991 (Print), 1757-899X (Online)

Muhammad, Siti Sabariah and Bakar, R. A. (2020) Spark ignition engine performance analysis of liquefied petroleum gas. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012065). ISSN 1757-8981

Muhammad Azri, Muhammed Nor and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and N. A., Abdul Hamid and W. M., Wan Mohamed (2022) Reliability, availability, maintainability and safety (rams) in railway’s assurance system and implementation challenges : A Review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 148..

Muhammad Faez Mohamad, Tajudin and Asnul Hadi, Ahmad and Juliawati, Alias and Nur Azhani, Abd Razak and Nasrul Azuan, Alang (2022) Microstructure characteristic of aluminium 6061 semi-solid feedstock billet produced with direct thermal method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 76..

Muhammad Fathallah, Aguk Zuhdi and Bimatara, Ian and Rosli, Abu Bakar (2021) Prediction performance of two stroke semi free piston diesel engine with dual piston system. In: IOP Conference Series: Earth and Environmental Science, 6th International Conference on Marine Technology (SENTA 2021), 27 November 2021 , Surabaya, Indonesia. pp. 1-10., 972 (012083). ISSN 1755-1315

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah (2017) The Two-Stroke Poppet Valve Engine. Part 2: Numerical Investigations Of Intake And Exhaust Flow Behaviour. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. 012024., 257 (012024). ISSN 1757-8981

Muhammad Kamili, Zahidi and Mohd Razali, Hanipah and D., Ramasamy and M. M., Noor and K., Kadirgama and M. M., Rahman (2017) The Two-Stroke Poppet Valve Engine. Part 1: Intake and Exhaust Ports Flow Experimental Assessments. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-8., 257 (012023). ISSN 1757-8981

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and M. H., Mohd Ali (2022) Shear strength of soft soil reinforced with singular bottom ash column. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 100..

N. A. Z., Abdullah and M. S. M., Sani and M. S., Salwani (2019) Comparison of crash behaviour of initial and updated finite element model of car crash box in crashworthiness analysis. In: 1st International colloquium on noise, vibration and comfort (CNVC 2019), 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-7.. (Unpublished)

N. A. Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2019) Comparison of crash behaviour prediction of a car crash box using initial and updated finite element model. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-10., 1262 (1). ISSN 1742-6588 (print); 1742-6596 (online)

N.A.Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2021) Study of modal properties and crashworthiness performance of crash box numerical model with different joining modelling strategies. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25 - 26 June 2020 , Selangor. pp. 1-12., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online)

Najihah, Mohd Ali and Fatimah, Dzaharudin and Erny Afiza, Alias (2020) Effects of varying ultrasound parameters on the oscillation of a microbubble near a boundary. In: 5th International Conference on Mechanical Engineering Research, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel; Kuantan. pp. 1-8., 788 (1). ISSN 1757-8981 (Print); 1757-899X (Online)

Nalliah, Nivishan and Abd Anasghaneem, Abd Aziz and Juliawati, Alias and Nasrul Azuan, Alang (2021) Design and development of motorbike roof shield for delivery service. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nelfiyanti, Nelfiyanti and N. M. Zuki, N. M. and M. F. F., Ab Rashid and Chon, Chin Seik (2022) Ergonomic Chair Design in Minimizing MSD Chassis Assembly Workers Complaints Using Ergonomic Function Deployment (EFD). In: ICMER 2021: Technological Advancement in Instrumentation & Human Engineering, 26-27 October 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 73-87., 882. ISBN 978-981-19-1577-2

Nik Mohd Azrin, Nik Aziz and Daing Mohamad Nafiz, Daing Idris and Saiful Anwar, Che Ghani and Ahmad Fitri, Yusop and Mohd Adnin, Hamidi and Muhammad Hanif, Abd. Rasid (2022) Stability analysis of multirotor drone with water jet payload. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 77..

Noor Suraya, Romali and Abdul Syukor, Abd Razak and Suryati, Sulaiman and Khairul Anuar, Shahid (2021) EnviRoof – A Green technology for sustainable stormwater management. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Noor Suraya, Romali and Nadiatul Adilah, Ahmad Abdul Ghani (2021) Flood damage prediction system for disaster risk reduction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Nor Azmi, Johari and Juliawati, Alias and Aliaa, Zanurin and Nurul Shuhada, Mohamed and Nasrul Azuan, Alang and Mohd Zamzuri, Mohd Ghani (2021) Anti-corrosive coatings of magnesium : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021 , Pekan. pp. 1842-1848., 48 (6). ISSN 2214-7853

Nor Hanisah, Husain and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2020) Thermal analysis of 6061 wrought aluminium alloy using cooling curve analysis-computer aided (CCA-CA) method. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-11., 788 (012018). ISSN 1757-8981

Nugroho, Agus and Rizalman, Mamat and Bo, Zhang and Wan Hamzah, Azmi and Mohd Fairusham, Ghazali and Yusaf, Talal (2023) Rheological Characteristics and Optimization of Novel TiO2-POE Nanolubricant Using Response Surface Method (RSM) for Air Conditioning System Compressor Application. In: Proceedings of the 2nd Energy Security and Chemical Engineering Congress (ESCHE 2021), 3-5 November 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 133-146..

Nugroho, Agus and Rizalman, Mamat and Z., Bo and Wan Azmi, Wan Hamzah and Muhamad Faisal, Ghazali and T. F., Yusaf (2022) Central composite design adoption for assessing the tio quality using response surface method. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 46..

Nur Ainaa Adhreena, Muhamad Shukri and Mohd Hafizi, Zohari and Epin, Vorathin (2022) Water temperature monitoring by using fiber bragg grating sensor. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 56..

Nur Ezzatul Balqis, Mohd Zahari and Norazlianie, Sazali and Zawati, Harun and Norsuhailizah, Sazali (2022) The analysis of risk factor repetitive motion in manufacturing activities based on ergonomics. In: Lecture Notes in Mechanical Engineering; 2nd Energy Security and Chemical Engineering Congress (ESChE 2021), 3 - 5 Nov 2021 , Virtual Conference. pp. 119-125.. ISSN 2195-4356 ISBN 978-981-19-4425-3

Nur Syafiqah, Nor Sofian and Luqman Hakim, Ahmad Shah (2022) Comparative study of submerged friction stir welding of aluminium alloy using different cooling medium. In: Engineering Technology International Conference (ETIC 2022), 7 - 8 September 2022 , Virtually hosted by Universiti Malaysia Pahang. 97 -104.. ISBN 978-1-83953-782-0

Nurul M., Suhaimi and Zhang, Yixuan and Joseph, Mary and Kim, Miso and Parker, Andrea G. and Griffin, Jacqueline (2022) Investigating older adults' attitudes towards crisis informatics tools: Opportunities for enhancing. In: CHI '22: Proceedings of the 2022 CHI Conference on Human Factors in Computing Systems, 29 April - 5 May 2022 , New Orleans, LA, USA. pp. 1-16. (258). ISBN 978-145039157-3

Nurul Najihah, Mohd Nazri and Muhammad Uzair, Matalif and Mohd Azrul Hisham, Mohd Adib (2020) Effects of blood flow patent and cross-sectional area on hemodynamic into patient-specific cerebral aneurysm via fluid-structure interaction method : A review. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Kuantan. pp. 1-8., 788 (012022). ISSN 1757-8981

Nurul Shuhada, Mohamed and Juliawati, Alias (2022) Benzotriazole (BTA) as corrosion inhibitors encapsulated in the micro/nanocontainer for smart coating: A review. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 58..

Oumer, Abduaziz Jama and Cheng, Jack Kie and Razman, Mat Tahar (2015) Green manufacturing and logistics in automotive industry: A simulation model. In: 2015 9th International Conference on IT in Asia: Transforming Big Data into Knowledge, CITA 2015, 4-5 Aug. 2015 , Kota Samarahan, Malaysia. pp. 1-6. (7349839). ISBN 9781479999392

Praptijanto, Achmad and Santoso, Widodo Budi and Nur, Arifin and Putrasari, Yanuandri and Dimyani, Ahmad and Suherman, Suherman and Pratama, Mulia and Wahono, Bambang and Wardana, Muhammad Khristamto Aditya and Rosli, Abu Bakar (2019) CFD study several injection timing on homogeneous charge compression ignition hydrogen diesel dual fuels. In: Proceeding - 2019 International Conference on Sustainable Energy Engineering and Application: Innovative Technology Toward Energy Resilience, ICSEEA 2019, 23-24 October 2019 , Tangerang. pp. 95-100. (8938644). ISBN 978-172813931-9

Qayyum, Halim and N., Nik Abdullah and M. R. M., Rejab and M., Rashidi (2020) Fracture response of La61.4Al15.9Ni11.35Cu11.35 bulk metallic glass subjected to quasi-static compression loading. In: Materials Today: Proceedings, 1st International Conference on Advanced Light-weight Materials and Structures (ICALMS 2020), 6-7 March 2020 , Hyderabad, Telangana, India.. pp. 1761-1767., 27 (Part 2). ISSN 2214-7853

Quanjin, Ma and Mohd Ruzaimi, Mat Rejab and Qayyum, Halim and Mohamad Nazirul Mubin, Merzuki and Mohamad Akmal Hakim, Darus (2020) Experimental investigation of the tensile test using digital image correlation (DIC) method. In: Materials Today: Proceedings; 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6 - 7 March 2020 , Hyderabad, India. pp. 757-763., 27 (161490). ISSN 2214-7853

R. A., Bakar and Abdul Rahim, Ismail and Ismail, Ali (2007) The Comparison Of Engine Performance For Diesel And CNG Fuel Using GT-Power Software. In: National Conference on Software Engineering & Computer Systems 2007 (NACES 2007), 20-21 August 2007 , Legend Resort Kuantan. . (Unpublished)

R. M., Yaacob and M. A. H., Hashim and M. S. M., Sani (2019) Finite element modeling and updating of the composite plate structure. In: Journal of Physics: Conference Series, 1st Colloquium on Noise, Vibration and Comfort, 7 March 2019 , Kelab Shah Alam, Selangor. pp. 1-11., 1262 (012013). ISSN 1742-6588 (print); 1742-6596 (online)

Rajan, Kumaresan and Jeevendran, Kananathan and Samykano, Mahendran and Kadirgama, Kumaran and Avinash, M. Badadhe (2022) Parameter influence on the tensile properties of FDM printed PLA/ coconut wood. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 42..

Ramle, Rashidah and Mohd Haider, Haidib and Yusuf, Muhammad Fakhrul and Azman Shah, Norzatul Bazamah and Kamarudin, Nur Khairani and Ruslan, Rafiza (2020) Detecting speed violation using wireless sensor network to reduce road accidents among commercial bus. In: 3rd International Conference on the Future of ASEAN (ICoFA) 2019, 4 - 6 October 2019 , Arau, Malaysia. pp. 351-360.. ISBN 978-981-15-3434-8

Rihayat, Teuku and Suryani, Salim and Fitriyani, C. N. and Aidy, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Synthesis and characterization of PLA-Chitosan-ZnO composite for packaging biofilms. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-9., 788 (012045). ISSN 1757-8981

Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Bio-Nanocomposite Polyurethane / Clay / Chitosan Paints that have thermal resistance and antibacterial properties for biomedical applications. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Kuantan. pp. 1-9., 788 (012042). ISSN 1757-8981

Rihayat, Teuku and Suryani, Suryani and Hasanah, Uswatun and Nurhanifa, Nurhanifa and Siregar, J. P. and Jaafar, J. and Cionita, Tezara and Fitria, Fitria (2020) Geraniol quality improvement on citronella oil as raw material for making anti-bacterial perfumes. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-12., 788 (012028). ISSN 1757-8981

Roduan, Siti Faqihah and Wahab, J. A. and Aiman, M. H. and Zaifuddin, A. Q. and Mohd Salleh, M. A. A. and Mahadzir, I. (2019) Effect of laser loop on surface morphology of copper substrate and wettability of solder joint. In: IOP Conference Series: Materials Science and Engineering; Electronic Packaging Interconnect Technology Symposium 2019, EPITS 2019, 24 - 25 November 2019 , Penang. pp. 1-8., 701 (012040). ISSN 1757-8981

Rosmazi, Rosli and Zamri, Mohamed and G., Priyandoko and M. F. F., Ab Rashid (2020) Bouc-Wen hysteresis parameter optimization for magnetorheological damper using Cuckoo search algorithm. In: AIP Conference Proceedings: 4th International Conference on the Science and Engineering of Materials (ICoSEM 2019), 26-28 August 2019 , Kuala Lumpur, Malaysia. pp. 1-2., 2284 (020016). ISSN 0094-243X ISBN 9780735440142

S., Kesavarma and C. K., Kong and M., Samykano and K., Kadirgama and A. K., Pandey (2020) Bending properties of 3D printed coconut wood-PLA composite. In: IOP Conference Series: Materials Science and Engineering, Energy Security and Chemical Engineering Congress, 17-19 July 2019 , Kuala Lumpur, Malaysia. pp. 1-11., 736 (052031). ISSN 1757-8981

S. S., Hoseini and G., Najafi and B., Ghobadian and H., Azimi-Nejadian and Hossein, Ahmadian (2020) Computational fluid dynamic modelling of NOx formation in diesel engine. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019), 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012067). ISSN 1757-8981 (Print), 1757-899X (Online)

Safitri, Nelly and Rihayat, Teuku and Suryani, Salim and Riskina, Shafira and Jazuli, Muhammad and Siregar, Januar Parlaungan and Jamiluddin, Jaafar and Cionita, Tezara and Fitria, Fitria (2020) Efficiency of photovoltaic technology for Citronella oil distillation. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019), 30 - 31 July 2019 , Kuantan, Malaysia. pp. 1-9., 788 (012079). ISSN 1757-8981

Sahu, Alok K. and Sudhakar, Kumarasamy and Sarviya, Rishindra Mohan (2020) U.V light effect on the mechanical behaviour of HDPE/Carbon black composites. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Vistana Hotel, Kuantan. pp. 1-10., 788 (012054). ISSN 1757-8981

Sandanamsamy, L. and Wan Sharuzi, Wan Harun and Ishak, Ismail and Fadhlur Rahman, Mohd Romlay (2022) Investigation of mechanical properties of 3d-printed polylactic acid (PLA). In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 69..

Shan, Kho Y. and Mahmood, Anwar and Islam, Sumaiya and Debnath, Sujan and Mas Ayu, Hassan (2019) Electrical behaviour of nanosilver doped gallium flexible conductor for biomedical application. In: IOP Conference Series: Materials Science and Engineering, 11th Curtin University Technology, Science and Engineering (CUTSE), 26-28 November 2018 , Curtin University Malaysia, Miri, Sarawak. pp. 1-6., 495 (012084). ISSN 1757-8981 (Print), 1757-899X (Online)

Siti Norsyahira, Mohd Zahari and Nor Atiqah, Zolpakar and Mimi Muzlina, Mukri (2022) The prospective of particle image velocimetry (PIV) measurement velocity profile in thermoacoustic system. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics; International Conference on Technology, Engineering and Science, IConTES 2022, 16 - 19 November 2022 , Antalya, Turkey. pp. 70-78., 21. ISSN 2602-3199 ISBN 978-605728324-5

Siti Norsyahira, Mohd Zahari and Nor Atiqah, Zolpakar and Nurrizatul Atikha, Rahmat (2022) Flow pattern analysis for oscillatory flow inside resonator tube for thermoacoustic refrigerator using PIV measurement. In: Eurasia Proceedings of Science, Technology, Engineering and Mathematics; International Conference on Technology, Engineering and Science, IConTES 2022, 16 - 19 November 2022 , Antalya, Turkey. pp. 18-26., 21. ISSN 2602-3199 ISBN 978-605728324-5

Suryani, . and Rihayat, Teuku and Nurhanifa, . and Siregar, J. P. and Jaafar, J. and Cionita, T. and Fitria, . (2020) Green composites of natural fiber bamboo/pineapple leaf/coconut husk as hybrid materials. In: IOP Conference Series: Materials Science and Engineering; 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019 , Kuantan. pp. 1-10., 788 (012038). ISSN 1757-8981

Syafikah, Ayob and Nor Alisa, Mohd Damanhuri and Intan Sabariah, Sabri (2021) Numerical construction of deformation field in a converging channel. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021, 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1..

Tarek, Abedin and Koh, Siaw Paw and Yaw, Chong Tak and Phing, Chen Chai and Tiong, Sieh Kiong and Tan, Jian Ding and Kharudin, Ali and Kadirgama, Kumaran and Benedict, Foo (2023) Vibration signal for bearing fault detection using random forest. In: Journal of Physics: Conference Series; International Conference on Emerging Electronic and Automation Technology 2022, ICEEAT 2022, 10-11 December 2022 , Virtual, Online. pp. 1-21., 2467 (012017). ISSN 1742-6588

Ul Ferdous, Imam and Nasrul Azuan, Alang and Juliawati, Alias (2022) A review on creep deformation and damage mechanism of grade 91/92 steels. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 159..

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and M. S. M., Sani and M. S., Mohd Zin (2019) The prediction of the dynamic behaviour of a structure using model updating and frequency based substructuring. In: IOP Conference Series: Materials Science and Engineering, 1st South Aceh International Conference on Engineering and Technology (SAICOET), 8-9 December 2018 , Politeknik Aceh Selatan Campus, Indonesia. pp. 1-7., 506 (012011). ISSN 1757-8981 (Print), 1757-899X (Online)

W. I. I., Wan Iskandar Mirza and M. N., Abdul Rani and M. A., Yunus and Rina, Febrina and M. S. M., Sani (2020) Estimating rotational FRFs of a complex structure using FE model updating, mode expansion and FRF synthesis method. In: IOP Conference Series: Materials Science and Engineering, International Conference on Engineering Science and Technology, 29-30 August 2019 , Malahayati University, Lampung, Indonesia. pp. 1-12., 807 (012045). ISSN 1757-8981 (Print), 1757-899X (Online)

X. H., Ma and N. A., Abd Razak (2023) The Change of Solidification Parameters on Hypoeutectic Aluminum-Silicon Alloy Under Different Cooling Rates. In: Technological Advancement in Mechanical and Automotive Engineering: ICMER 2021, 26-27 October 2021 , Virtual Conference: Universiti Malaysia Pahang. pp. 263-278.. ISBN 978-981-19-1457-7

Yousefi, Elnaz and Jaliliantabar, Farzad and Abdul Adam, Abdullah (2022) Experimental investigation of temperature-dependent thermal stability of eicosane-based nano-enhanced phase change materials. In: The 6th National Conference for Postgraduate Research (NCON-PGR 2022), 15 November 2022 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. p. 79..

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Azhar, Ahmad Syafiq Jazatul and Nelfiyanti, . (2021) The effect of quick response manufacturing in supply chain activities: A case study of automotive company in Malaysia. In: Lecture Notes in Mechanical Engineering; Recent Trends in Manufacturing and Materials Towards Industry 4.0., 6 August 2020 , Universiti Malaysia Pahang. pp. 547-553.. ISSN 2195-4356 ISBN 978-981-15-9504-2

Z. M., Hafizi and Vorathin, E. (2021) Investigation of low frequency fibre Bragg grating accelerometer based on thermoplastic cantilever beam. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021), 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-7., 1078 (012012). ISSN 1757-899X

Zahari, Taha and Jessnor Arif, Mat Jizat and Ismayuzri, Ishak (2012) Bar Code Detection Using Omnidirectional Vision for Automated Guided Vehicle Navigation. In: International Conference for Automatic Control and Artificial Intelligence 2012, 24-27 March 2012 , Xiamen, China. . (Unpublished)

Zahari, Taha and Mohd Fadzil, Abdul Rahim and R., Mamat (2017) Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method. In: IOP Conference Series: Materials Science and Engineering, 4th International Conference on Mechanical Engineering Research (ICMER2017), 1-2 August 2017 , Kuantan, Pahang, Malaysia. pp. 1-20., 257 (012057). ISSN 1757-8981

Zaifuddin, A. Q. and Afiq, M. D. and Aiman, M. H. and Quazi, M. M. and Mahadzir, I. (2022) Effect of laser surface modification on SS316L surface roughness and laser heating temperature. In: Lecture Notes in Mechanical Engineering; International Conference on Mechanical Engineering Research, ICMER 2021, 26 - 27 October 2021 , Virtual Conference. pp. 959-969.. ISBN 978-981-19-1457-7

Newspaper

Amin Ridzuan, Ishak (2018) UMP cipta casis dinamomoter basikal elektrik. Berita Harian . p. 23.

Asrol, Awang (2022) Jualan nombor plat khas UC cecah RM3 juta. Harian Metro .

Daing Nasir, Ibrahim (2013) Advancing automotive agenda. New Straits Times, (15 Oc . p. 6.

Diana Surya, Abd Wahab (2021) Yayasan UMP sasar RM3.5 juta penjualan nombor pendaftaran khas UC. Utusan Malaysia .

Laupa, Junus (2022) SCAV bas pintar tanpa pemandu inovasi terbaharu UMP. Jurnal.my .

Mimi Rabita, Abdul Wahit (2022) Jualan nombor plat khas UC cecah RM3 juta, kini dibuka untuk jualan umum. UMP News .

Mimi Rabita, Abdul Wahit (2022) UMP diiktiraf hab bidang Automotif TVET. UMP News .

Mimi Rabita, Abdul Wahit (2021) UMP researchers develop SCAV self-driving bus for campus residents. UMP News .

Mohamad Shofi, Mat Isa (2022) Jualan nombor plat khas UC cecah RM3 juta, kini dibuka untuk jualan umum. Utusan Malaysia .

Mohd Azrul Hisham, Mohd Adib (2013) Kejuruteraan biomekanik bantu pembangunan negara. Berita Harian .

Nik Amirul Mu'min, Nik Min (2022) UMP bangun bas pintar tanpa pemandu. Sinar Harian .

Nor Fadzillah, Zulkipli (2016) Mahasiswa UMP cipta inovasi meluncur dalam TRIUMP. UMP News . (Unpublished)

Nur Laila, Afandi (2018) Pasukan UMP- Tech cipta kejayaan dalam SEM Asia 2018. UMP News . (Unpublished)

Nurain, Rozy (2017) Bengkel roket air tarik minat pelajar sekolah. UMP News . (Unpublished)

Rosniza, Mohd Taha (2013) UMP bantu industri automotif. Berita Harian .

Rowena, Chua (2021) A taste of F1 racing for Msian teens. The Star .

Siti Nur Azwin, Zulkapri (2019) MARii siap sedia memasuki bidang baharu industri automotif. Berita Harian . p. 24.

Siti Nurfarmy, Ibrahim (2020) MARii perkenal Dwi Ijazah Sarjana. Harian Metro .

T.N., Alagesh (2022) UMP to have on-campus driverless bus developed by in-house researchers. New Straits Times .

T.N., Alagesh (2021) UMP to launch special UC vehicle registration number next year. New Straits Times .

UMP, . (2013) Mercedes mahu tingkat rakyat tempatan. Utusan Malaysia .

UMP, . (2013) Mercedes-Benz Malaysia ambil graduan sebagai eksekutif. Kosmo .

UMP, LIB (2016) BMW Malaysia sumbang lima enjin kepada IPT. Kosmo .

UMP, PNC (2019) Kaloborasi UMP dan Haro Sports dalam bidang pembuatan kenderaan sukan permotoran. UMP News . (Unpublished)

UMP, PNC (2019) UMP and Haro Sports working together in motor sports vehicle manufacturing. UMP News . (Unpublished)

UMP, PNC (2020) UMP receives RM157,800 from UMW Toyota Motor. UMP News . (Unpublished)

UMP, PNC (2020) UMP terima sumbangan RM157,800 daripada UMW Toyota Motor. UMP News . (Unpublished)

UMP, PNC (2019) Volkswagen and UMP form partnership to strengthen ties between automotive and TVET. UMP News . (Unpublished)

Research Report

Gan, Leong Ming (2008) The development of the electric energy management system for series hybrid electric vehicle. , [Research Report: Research Report] (Unpublished)

Ghazali, K. H. and Khatun, Sabira and Mohamed Abdelaziz, Izzeldin Ibrahim and Jadin, Mohd Shawal and Karim, Rohana Abdul Early detection monitoring image of bearing fault thermal image in induction motor. , [Research Report: Research Report] (Unpublished)

Heerwan, P. M. Invesigation on differential braking torque controller to improve the stability of small in-wheel electric vehicle. , [Research Report: Research Report] (Unpublished)

Ramasamy, D. (2008) Series hybrid electronic vehicle cost-effective power train components development. , [Research Report: Research Report] (Unpublished)

Thesis

Abdulwahid, Omar Arman (2021) Numerical investigation of exhaust gas reforming of natural gas for on-board hydrogen-rich syngas production in spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Ang, Fuk Chen (2021) Evaluation of combustion characteristics, performance and exhaust emission for diesel fuel with various type nano particle blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Awang, Idris (2009) Effect of compressed natural gas on performance and emission of a 4-stroke spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Azizul Qayyum, Basri (2021) Integrated single minute exchange of die (ismed) approach to improve tandem press line operation output in automotive industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Erny Afiza, Alias (2012) Skin friction reduction by micro bubbles in pipe flow. Masters thesis, Tokai University (Contributors, UNSPECIFIED: UNSPECIFIED).

Hemin M., Mohyaldeen (2011) Analysis of an automobile suspension arm using the robust design method. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rahman, Mustafizur).

Kavinmugil, Kalaiselvan (2022) Degassing effect on nickel aluminum bronze alloy castings. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Maarof, Mohd Rashidi).

M. F., Abas (2013) Autonomous formation flight control of multiple UAVs with motion capture system. PhD thesis, Chiba, Japan : Chiba University (Contributors, UNSPECIFIED: UNSPECIFIED).

M. R. M., Rejab (2013) The mechanical properties of novel lightweight structures based on corrugated-cores. PhD thesis, University of Liverpool (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Hafidzul Rahman, Alias (2022) Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Heerwan, Peeie (2012) Skid control of small electric vehicle with hydraulic-mechanical hybrid brake system. Masters thesis, School of Engineering (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohamad Izuan, Izzudin (2022) Investigation on performance, combustion and emission characteristics using biodiesel-butanol-water blends in diesel engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad Fitri, Yusop).

Mohamad Kamil, Mohammed (2011) Simulation models to optimise hydrogen fuelled engine performance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ashraf, Ahmad (2015) Model-free controller design based on simultaneous perturbation stochastic approximation. PhD thesis, Department of Systems Science (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Azri Hizami, Rasid (2016) Contribution to multi-physical studies of small synchronous-reluctance machine for automotive equipment. PhD thesis, Université de Technologie de Compiègne (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Fadzil, Abdul Rahim (2021) Modelling and calibration of high-pressure direct injection compressed natural gas engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, B. Jaafar).

Mohd Fadzil, Abdul Rahim (2009) Numerical study of combustion for a 4-stroke gasoline engine using turbulent flame speed closure model. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rosli, Abu Bakar).

Mohd Hafiz, Ali (2021) Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Adam, Abdullah).

Mohd Nasuha, Ab Halim (2023) Investigation of nickel aluminium bronze (nab) metals cast and its properties. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rashidi, Maarof).

Mohd Qayyum Akbar, Abdul Halim (2022) Development and characterisation of lanthanum-based bulk metallic glass (bmg) with localised ductilisation. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rosdi, Salleh (2021) Thermophysical and optimization of performance and emission of turbocharged si engine using gasoline, ethanol and fusel oil blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhamad Zulhilmi, Ismail (2021) Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Azim Anwar, Noor Hisham (2021) Synthesis and characterisation of graphene and its corrosion resistance on magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Zikri, Japri (2022) Noise and vibration analysis in the diesel engine based on biodiesel usage. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Shahrir, Mohd Sani).

Nor Maniha, Abd Ghani (2006) Active steering for vehicle system using sliding mode control. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur, Cholis (2013) Electro-mechanical single acting pulley rubber V-belt continuously variable transmission (EMSAP RVB-CVT) for scooter. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Waheeda, Abdu Rahman (2021) Characterization of lubricating grease formulated from waste engine oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Mohd Aizudin).

Rosmazi, Rosli (2013) Active force control with iterative learning control algorithm for a vehicle suspension. Masters thesis, Universiti Teknologi Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Sakinah, Muhamad Hisham (2022) Thermophysical properties and tribological behavior of hybrid cellulose nanocrystal copper (ii) oxide (cnc-cuo) as lubricant additives. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Salwani, Mohd Salleh (2013) Computational crashworthy optimization of partially filled aluminium foam for automative side member. PhD thesis, Universiti Putra Malaysia (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Muhammad Noor Sarbani, Mat Daud (2022) Graphene additive effects on diesel blend fuels for performance, combustion and emissions on diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zamri, Mohamed (2014) A study of tyre cavity resonance noise mechanism and countermeasures using vibroacoustic analysis. PhD thesis, RMIT University (Contributors, UNSPECIFIED: UNSPECIFIED).

UMPSA News

Ezrin Hani, Sukadarin and zuhaidi, Mohd Jawi@Said (2021) Gayat Memandu selepas bencana Covid-19, perlukah Brek Kecemasan Automatik AEB. UMP News .

Jolius, Gimbun (2017) UMP menang pertandingan kereta inovasi CHEM-E-CAR ke-12. UMP News . (Unpublished)

Mohd Rosli, Hainin and Nur Izzi, Md Yusoff (2022) Wajibkan pita pemantul cahaya terhadap semua kenderaan berat. Berita Harian .

Muhammad Aizzat, Zakaria (2021) Menyelusuri teknologi di dalam kenderaan swa-pandu masa hadapan. Bersediakan kita menghadapinya. UMP News .

Undergraduates Project Papers

Ab Rahman, Mohd Nooh (2008) Noise source identification of engine dynamometer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Gafar, Bashir (2009) Preliminary design and development of three wheel car for disable person. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abdul Aziz (2007) Analyze the rear suspension structure for passenger car. Faculty of Mechanical Engineering, University Malaysia Pahang..

Abdul Hafiz, Ramli (2008) Design and development of single seater electric sccoter for short distance application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Jaafar (2013) Experiment and analysis of motocycle exhaust design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah, Muhamad Nawi (2013) Computational analysis of two dimensional flows on a convertible car roof. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abu Harfiz, Hassan (2009) Development of control system of automated guided vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adi Firdaus, Hat (2009) Dynamics characteristic of connecting rod for four stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Adib, Azmi (2013) Fabrication of a test bed for performance testing of Unmanned Aerial Vehicle (UAV) propulsion system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Ahmad Farhan Hakim, Azmi (2008) Improvement of bus roof section. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Fathi, Mohd Zainuddin (2013) Performance of lithium polymer battery on electric propulsion system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Ahmad Hakimi, Abdul Nasir (2013) Development of ammonium perchlorate based solid propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Kamil, Miskam (2007) Design and fabrication power window apparatus (bowden cable type). Faculty of Mechanical Engineering, University Malaysia Pahang.

Ahmad Muizz, Ishak (2012) Study of effects of fuel injection pressure on performance for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Mustakim, Mohd Rusli (2010) Comparison of automatic and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nasrullah, Norazaman (2012) Analysis on the behaviour of the transient response in turbocharger diesel engine by using simulation / Ahmad Nasrullah Norazaman. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Sapuan, Hasan (2008) Design and simulation on the air dam for Proton Pesona by using CFD tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Syahir, Zainal (2008) Energy management of battery to DC motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zaim Solehin, Che Hasan (2011) Modelling and simulation of modified skyhook control for semi-active suspension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zainul Ariffin, Mohamad (2013) Optimal design of electric bicycle (electric bicycle motor). Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Ahmad Zaki, Che Zainol Ariff (2010) Modal analysis of car disc brake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aizad Ayasyi, Ab Ghafar (2007) Experimental evaluation of vortex generator usage to reduce the coefficient of drag of proton saga car. Faculty of Mechanical Engineering, University Malaysia Pahang.

Alauddin Hafiz, Yusof (2008) Air conditioning study for automotive application / Alauddin Hafiz Yusof. Faculty of Mechanical Engineering), Universiti Malaysia Pahang.

Amiruddin, Ahmad (2007) Car cooling system during parking using blowe. Faculty of Mechanical Engineering, University Malaysia Pahang.

Amirul, Ramlan (2012) Design and analysis of three wheel prototype car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Amir, Abd Jamil (2009) Performance simulation of Modenas 110cc 4-stroke motorcycle engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Izwan, Abdullah (2013) Design and fabrication of tandem rear part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amran, Kaharudin (2008) Design and development of piston-controlled intake port for 4-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aneesa Aqeela, Mohd Asha’ari (2016) Guest satisfaction survey on public bus services: a case study in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ang, Soon Tat (2007) Development of UMP runabout vehicle (URV) frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ariffin, Abdullah (2013) Vibration suppression of flexible beam using electromagnetic shunt damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arunan, Siwaraju (2010) Design and fabrication of small scale trainer aircraft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asfidayu, Abdul Ghani (2012) Sustainable parking management strategy for Sultan Ahmad Shah Mosque, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Azharuddin, Anuar (2014) Exploration on pedestrian behaviour in Kuantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Azri Amzari, Ramli (2010) Evaluation and optimization of heat extraction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Badrul Hisyam, Ahmad (2009) Design improvement for power window mechanism-scissor type. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Bastian Wibar, Momang (2013) Design analysis of exterior car body part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chan, Seng Chang (2007) Design for serviceability evaluation of car door. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chang, Jian Fei (2015) Design and development of smart car parking system using arduino and android. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Che Muhammad Ridhwan, Che Hashim (2012) Design, detail analysis and performance testing of uav propulsion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chew Sin, Seng (2013) Courseware for Driving Simulation. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Chong, Soon Woei (2012) Emergency beacon for elderly. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Dinnish, A/L Thegaraju (2008) Design and fabricate a reer wheel drive differential simulation rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Edwin Hanjiang, Chan (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Edwind, Liaw Yee Kang (2016) Image based autonomous indoor parallel parking assist on omni-directional vehicle (ODV). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Elexanderio Julit, Iling (2013) Development of wireless ignition system (WISys) for solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Engku Izyan Munirah, Engku Afandi (2010) Performance analysis on the influent of front tyres movement to the steering wheel system for steady and ride road conditions. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ezzad, Ezani (2012) Study on pool combustion of tire wasted fuel, plastic fuel and diesel fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faizarul Akmal, Jamaludin (2008) Roll forming simulation for automotive bumper fixing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fazliana, Fauzun (2010) Design and development of 1-seated urban car chassis using aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Feng, Cheng (2013) Comparison of design experiment in carbon dioxide (co2) corrosion prediction. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Fyroz Ziffa, Mohd Mustafa Kamal (2008) Simulation of electromechanical valve drive on single cylinder four stroke free piston diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gobinath, Raman (2010) Design of a lift reduction device for passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafierul Hafiz, Md Razi (2008) Simulation test of automotive intake valve using computer aided engineering software. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Hairulazam, Hairuldin (2006) Car lock indicator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hasan, Zainal Abidin (2013) Vibration suppression of flexible beam using eddy current damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasbullah, Mat Isa (2007) Design and fabrication of rear car spoiler for Proton Wira model. Faculty of Mechanical Engineering, University Malaysia Pahang.

Hilmi, Mohd Zahidi (2010) Tyre pressure monitoring system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ho, Siang Ven (2013) Design and implementation of an autonomous multistoried car parking system with human machine interface (HMI) controlled by programmable logic controller (PLG). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Hong, Kim Soon (2008) Effect of different type of car to tire deformation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hui Min, Chow (2012) Design of a working model hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Husnul ‘Asyiyyah, Mohamad @ Awang (2012) Development of vision autonomous guided vehicle behaviour using neural network. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Huzairi, Hashim (2009) Development of automated guided vehicle (mechanical system). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Idham Ariff, Mat Ali (2010) Design and analysis solar car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ilyas, Ishak (2008) Optimization of engine mounting bracket location. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Iskandar Izany, A Rahman (2008) Computational stress and modal analysis of automobile tyre. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzat Zikri, Musa (2013) Design and fabricate tandem bicycle front part. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jamail, Jamal (2009) Stress analysis on front car bumper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Jamilah, Mohamad (2012) Sustainable parking management strategy for Tengku Ampuan Afzan Hospital Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Johari, Ismail (2008) Design and analysis of vortex generator for a HEV model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kevin Krishanderan, K.Vasudhevan (2007) Design of model glider. Faculty of Mechanical Engineering, University Malaysia Pahang.

Khairin, Syam (2013) A model working hovercraft. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Khairul Anuar, A. Rahman (2012) Design of revetec engine cam with cycloidal motion profile. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairulanwar, Abd Rani (2010) Design and development of gearing system for car simulator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Kogilan, Govindasamy (2009) Design and analysis of a rear wheel cover for a car using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lawrence, Blasius (2010) Performance analysis on percentage of wheel slip for a passenger car using GPS and wheel speed sensor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, How Cheh (2012) Development of sound source separation as hand-free interface for in-vehicle infotainmenet system (IVIS). Faculty of Electric & Electronics Engineering, Universiti Malaysia Pahang.

Leong, Guo Bang (2013) Fabrication of air-hybrid all terrain vehicles front suspension system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Lim, Wai Tuck (2007) Design and fabrication of UMP go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lukman Nul-Hakem, Mohd Yusop (2012) Experimental study of six-stroke engine for heat recovery. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

M. Surenderen, Morgan (2013) Performance of Proton Green Mobility Challenge electric car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Maaruf, Muhamad (2010) Design and development of transmission for two-seated urban car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahasufee, Mahazis (2009) Design and analysis front hood fairing for cars. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mahfuzah, Mohd Nasir (2009) Anti-theft car seat design (electronic/control). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Masturah, Suliman Atoriy (2016) Standardized work approach toward kaizen event of the Front Hub MyVi D54T line at Sapura Machining Corporation Sdn Bhd. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mgt Arnaz, Mgt Ramli (2007) Design improvement of wira's driver seat usine integrated DFA and VE. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Moganaraj, Murugiah (2013) Detail experimental testing of unmanned aerial vehicles engine performance. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Al Rassid, Mohamad Borhanudin (2008) Two dimensional car body visualization using air flow bench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Firdaus, Omar (2013) Optimal design of electric bicycle : bicycle frame design. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Hushairy, Abdul Jalil (2012) Simulation of performance of air conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Izwan, Ghazali (2012) Design, fabricate and testing small rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Kamal Hilmi, Mohd Rafi (2012) Energy management for a series hybrid electric vehicle (HEV). Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Mohamad Kamarul, Shamsuddin (2009) Aerodynamic study of vehicle drag based on bluff body. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohamad Luqman, Zaki Monsarif (2013) Modeling magneto-rheological damper using neural network and simulated annealing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Nasrul, Mohd Nasir (2013) Modelling, simulation and experimental verification of a semi active absorber system. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohamad Ridhwan, Raja Mohd (2012) Design, fabrication and testing of small scale turbine jet engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sazuan, Sarifudin (2012) Design and analysis of car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shahir, Mohamed Nafi (2013) Development of extended range and blended control module for plug-in hybrid air motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Tarmizi, Arbain (2008) Computational stress and modal analysis of car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Yusri, Mohamad Zin (2013) Experimental analysis of drowsiness detection system based on grasping steering bahavior. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohammad Akmal, Akashah (2006) Remote control car starter (RCCS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Azlan, Abdul Aziz (2010) Comparison manual and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Faizal, Mohamad Ehsan (2008) Parking motoring system with security system features. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Iskandar, Othman (2008) Design and build a turbochanger stand and airflow circuit piping for an automotive turbochanger testing apparatus. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Naqib Amirul, Abdul Rashid (2012) Development of diesel engines cooling system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Nazree, Abd Malek (2013) Conceptual study on hydrogen powered bicycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Norshim, Mohamed Hashim (2012) Development of solid rocket propellant. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Saberi, Ahmad (2009) Active suspension control of three axle railway vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohammad Shafei, Ramli (2013) Experimental study of alternative tire pyrolysis oil performance operating in single cylinder diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Adzlan, Mohd Azmi (2012) Experimental & numerical study on sheet metal lateral bending with both ends pinned. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Affendi, Ibrahim (2013) A study on various type of rotor disc brake using fae analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Afize Syafri, Mohd Ajwi (2009) Improvement vehicle starting system through user password. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aiman, Mahusin (2013) Design and development of mountain bike rear suspension for all mountain riding style. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Aizat, Mohd Azizan (2009) Design and prototype loading and unloading mechanism for automated guided vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ali Amri, Muhammad Hassan (2008) Design and fabrication of easy assemble tricycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asqalani, Naharudin (2008) Design and simulation automobile active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azahan, Mohd Yusuff (2010) Test rig development for high pressure spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azee, Zaidee Ee (2010) Modeling and simulation of skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azmi, Sitam (2012) Reduction of diesel exhaust emission by using first stage seawater spray system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Dzohairy, Mohammad Mohsan (2010) Front and rear suspension design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhil, Rani (2008) Design and fabrication of firing test rig for two-stroke spark ignition engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhirul Amran, Jali @ Ali (2013) The development of a suspension spring in term of dimension. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadhli, Che Ismail (2009) Motorcycle jack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faez, Baharom (2009) Virtual testing wind and analysis performance of UMP lab circuit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farhan, Mohd Pilus (2009) Improvement design for power window mechanism of cable type. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farid, Zainudin (2010) Vibration investigation of passenger car rear suspension system under various road condition and driving maneuever. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fikri, Arifin (2013) Modelling magneto-rheological damper using radial basis function neural network. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Firdaus, Kamarudin (2012) Analysis of emulsion fuel spray characterictics using optical accessible chamber. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus Naqiuddin, Che Pa (2008) Exhaust port flow study on various cylinder head using flowbench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdauz, A. Samad (2009) Exhaust gas calorimeter for four stroke gasoline engine simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafiz, Ghazalli (2007) Finite element analysis of cam and its follower contact stress mechanism. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizan, Mamat (2008) Improvement of rear bumper design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Nor Izham (2007) Experimental modal analysis on Wira car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Nawi (2010) Cost reduction study of automotive part using DFA method : rear lamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Shaarani (2009) Design a battery charger controller for electric vehicle (mechanical). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hassnun Saiffuddin, Mohd Mustafa (2012) Fabrication of display unit for electrical and electronic wire harness of single cylinder four stroke engine for teaching purpose. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazmie, Hamdan (2010) Exhaust emission of waste plastic disposal fuel on single cylinder YANMAR diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizir Arafat, Tambun (2007) Design and fabrication of power window apparatus (frame type). Faculty of Mechanical Engineering, University Malaysia Pahang.

Mohd Husaini, Abd Wahab (2009) Stress analysis on truck chassis. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Izrey Izuan, Mat Lazin (2013) Development of plug-in hybrid electric motorcycle powertrain system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Izuan, Hashim (2013) Vibration suppression of rotating disc using eddy current method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat, Zulkafli (2013) Fabrication of hybrid air ATV rear suspension system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Mohd Izzat Faliqfarhan, Baharom (2008) Simulation test of automotive alloy wheel using computer aided engineering software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairil, Asri Kamaluddin (2010) Deceleration performance comparison for passenger car under on-road and off-road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairil Azirul, Khairolazar (2009) Robust design of lower arm suspension using stochastic optimization method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khairudin, Yahya (2007) Simulation stress and finite element analysis based of Suzuki FXR 150cc motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khalil Azingah, Salleh (2009) Simulation and analysis drag and lift coefficient between sedan and hatchback car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khalis Aizat, Abd Aziz (2008) Development of auxiliary equipment for 1 seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazirul Mubin, Mohammad Zaki (2008) Aerodynamics optimization of rear car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nor Afiq, Nor Hashim (2012) Design and development of high pressure natural gas injector model for single cylinder four stroke engine using matlab simulink. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurul Akmal, Mohd Yusof (2007) Development of car tire rack. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurunnajmi, Amat Janji (2012) Camshaft design for a six-stroke engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Mohd Rasol (2012) Analysis of diesel particulate matter on single cylinder diesel engine using waste plastic fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Redza, Abdul Razak (2008) Tool to determine vehicle ground lines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Salehuddin, Idres (2013) Active force control on active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahmal, Mohd Shahid (2010) Study of F1 car aerodynamics rear wing using computational fluid dynamic (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shaifullah, Shahruddin (2009) Aerodynamics behaviour of Persona car using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Sufian, Jamaludin (2012) A study of the causes of bouncing problems of shock absorber. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Mohd Syazrin, Sopnan (2008) Design and analysis rear diffuser for HEV model. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazrul Shafiq, Saad (2010) Study of F1 car aerodynamics front wing using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Yazid, S Hamid (2007) Design and fabrication an electric buggy frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd. Amir Izat, Mhd. Rodzi (2009) Active suspension control of two axle railway vehicle. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Afiq, Saukit (2013) Conceptual study of hydrogen powered wheelbarrow using fuel cell. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Amir Shah, Arif Harun (2007) Gear ratio investigation of automotive manual transmission. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Amirudin, Kamalrul Badri (2009) Analysis performance of Waja car air-conditioning system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Amzansani, Abd Wahab (2010) Design semi-active suspension using magneto-rheological damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Aslam, Kamarudin (2012) Design and fabrication of go-kart chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Bakri, Abdul Hamid (2013) Analysis of battery performance on electric bicycle rear wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Farkhanif, Jamaluddin (2007) Design & fabrication the front skirt of Proton Satria. Faculty of Mechanical Engineering, University Malaysia Pahang.

Muhamad Faruqi, Zahari (2013) A study of drag force on different type of airfoil in a subsonic wind tunnel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Muhamad Fikri, Abd Rahman (2011) Design, analysis and fabricate solar car chasis and body (race type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Firdaus, Mahmud (2008) Improvement of front car bumper system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Harif, Ghani (2010) Reliability study of diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hazrul Hakimin, Abu Shaari (2009) Linear static stress analysis of an automobile fuel tank. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Izwan, Sunawan (2010) Frame body structure for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Khairul Hakimi , Hamid (2012) Computational analysis study of aerodynamic vehicle passenger car (front grill). Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhamad Nazmi, Ahmad Nazari (2010) Fuzzy control on vehicle active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Rusydi, Ali (2010) Modeling and simulation of modified skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Solehin, Daud (2012) Design and analysis of urban concept car chassis for shell eco-marathon challenge. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Zarith Haiqal, Mohd Jamil (2016) The air compressed powered car. Faculty of Engineering Technology, Universiti Malaysia Pahang.

Muhammad, Zulkifly (2007) Design and fabricate the braking system for the electric buggy car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Mohd Noor (2012) Cost reduction study of automotive part using dfa method : car seat. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad, Shahrin Suhaimi (2008) Development of attachment for customized steering rack on one seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Adnin, Mat Bahari (2012) Design, construction, and testing of an open-loop low-speed wind tunnel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Afiq Naquiddin, Abd Rahman (2012) Modeling the magneto- rheological damper using recurrent neural network method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Akmal, Jamaludin (2013) Development of two wheels space-frame plug-in hybrid electric motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Amir Akmal, Ahamad Khalid (2013) Fabrication of hybrid electric chopper tyre motorcycle front suspension. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Muhammad Amirul Hadi, Zainal Abidin (2016) The operating characteristic of free public 'Bas Selangorku' in Shah Alam. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Muhammad Faizul Izreen, Othman (2010) Understanding performance analysis for front wheel drive (FF) sedan vehicle under steady and ride road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Farid, M Fathil (2008) Painting process improvement for automotive industry. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Firdaus, Othman (2012) Design and analysis of urban car for Shell eco marathons Asia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Haikal, Haron (2008) Finite element analysis of automotive intake manifold using CAE software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hamizi, Msduki (2010) Simulation of common rail for hydrogen engine in automobile application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ibrahim, Md Nujid (2008) Develop and design shematic diagram and mechanism on one seater drag buggy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Ikhwan, Razak (2012) Design and fabrication of steering system for electric go kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Muhaimin, Shaari (2009) Prediction of tire friction. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Muhammad Najmudin, Mohd Taib (2007) Design and analysis a new spoiler for UMP HEV using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang .

Muhammad Shahir, Nazir (2013) The application of adhesive bonding for different types of material for car body parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shukri, Rabain (2010) Performance and emission characteristics of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syafiq, Ayob (2010) Upper body structure design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mustaqim, Mohamad (2010) Effect of exhaust gas recirculation to performance and emissions of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mustika Yasti, Yasril (2013) Development of plug in drive train system for hybrid electric motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muzammil, Mohamad Alias (2013) Study of spray breakup and mixture in a gasoline direct injection engine by using simulation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Navindran, Subramaniam (2010) Effect of exhaust temperature on the performance of a diesel engine with EGR. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Akmal, Zolkifli (2010) Design and development of integrated chassis of one seated urban car using embedded aluminium and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hazira, Mohamad Haidzir (2010) Experimental analysis of gyroscopic effect on vehicle vibration and accident potential. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Hafriz, Abd Halil (2013) Two dimensional particle flow inside driven trapezoid applying eularian-lagrangian approach. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Norazlianie, Sazali (2012) Experimental & numerical study on sheet metal lateral bending with fixed and pinned ends. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazrin, Sarju @ Hj Mohd Nor (2013) Evaluation of the design of national car’s seat belt for comfort of pregnant women or big size driver. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Norzikri, Sairi (2010) RFID based security system for vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Afnan, Abdul Halim (2010) Design and development of integrated chassis of three wheel prototype car using aluminum and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fasehah, Maarop (2010) Reverse modeling of car door using laser scanning methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fitrina, Mat Nawi (2013) Development of a rocket recovery system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Nadiah, Mohammad Alwudin (2012) The reduction of work in progress between process in strut production line of a manufacturing factory. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Nur Naquiah, Mohammad Ali (2010) Automotive engine fault diagnosis using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Farhana, Nasarrudin (2016) The relationship between driver's background and driver's speed preferences. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Husna, Mohamad Shariff (2009) Anti theft design of car seat (mechanical). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Perabu, Moorty (2013) Design an automobile simulation test rig. Faculty of Mechanical Engineering , Universiti Malaysia Pahang.

Phoo , Ken Seng (2011) Proposal to improve parking facilities along Jalan Tun Ismail. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Phoon, Sin Ye (2013) Green manufacturing: effect of vortex tube on machinability of Mild steel. Faculty of Manufacturing Engineering , Universiti Malaysia Pahang.

Pin, Banchaa Inthaknu (2012) Development of an energy management system for an inhouse parallel hybrid electric vehicle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ponnusamy, Barath (2011) Magnet device to reduce diesel consumption in diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Pramnath, Ravi (2012) Analysis of reduction of particulate matter concentration and size distribution of di diesel engine by seawater spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Radhiah, Abd Razak (2013) Optimal design of a competition bicycle for comfort riding ( focus on bicycle seat for female). Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Rafidah, Rahim (2008) Maintenance system analysis of vehicles and air-conditioners at Universiti Malaysia Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rafiuddin, Azman (2008) Study of vortex shedding around bluff body using air flow test rig. Faculty of Mechanical Engineering , University Malaysia Pahang.

Rahmat, Noor Yatim (2008) Design and analysis of a new racing bicycle frame. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Ashrafuzzaim, Raja Zolkiply (2008) Analysis of Proton Persona side door (driver) using simulation tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raja Norhayati, Raja Sulaiman (2015) A study satisfaction about quality of taxi service in Kota Bharu, Kelantan. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Raja Sharul Azuan, Raja Kamaralzaman (2010) Development of liquid spray triggering and control. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Raymond, Joseph (2008) Development of charging system for advanced vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Redzuan, Ahmad (2008) Develop drag estimation on hybrid electric vehicle (HEV) model using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ridhwan, Che Zake (2008) Aerodynamics of aftermarket rear spoiler. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ros Arianty, Mohamad Ghazali (2013) Evaluation on national car's seat belt design for comfort of small size driver. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Roslan, Ahmad Faiz (2008) Electric motor propulsion system for electric vehicles (EV). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Saiful Amin, Kamaruddin (2012) Modelling and simulation of skyhook controllersemi-active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Samurgam, Tilakiswaran (2007) Development of battery powered tricycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ser, Beng Sian (2013) Development of four wheels space-frame hybrid air motorcycle chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharol Azri, Halim (2008) Investigation of pressure effect on methane conversions incatalytic combustion system. Faculty of Mechanical Engineering , Universiti Malaysia Pahang .

Shuhaizal, Mohd Noor (2007) Failure analysis of driveshaft of Toyota SEG. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sibra Mallisi, Yussof (2009) Design and analysis battery packaging for electric vehicle (EV). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Soon Woei, Chong (2002) Emergency beacon for elderly. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Suhaimi, Sulaiman (2007) Vehicle color glossiness study by using SPC in an automotive manufacturing company. Faculty of MechanicalEngineering, Universiti Malaysia Pahang.

Sunil Shanaz, Redzuan Perpinder (2010) Power system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suraj, Vijanathan (2013) Designing and fabrication of racket test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suriyana, Wagiman (2011) Parking efficiency study for Kuantan Parade, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syahmi, Ahmad Ramly (2012) Design of exhaust gas recirculation system (EGR) for diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syahrul Nizam, Zaini (2007) Automatic vehicle detection system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syazana, Noorshirwan (2012) Design and fabrication of driver compartment of an electric Go Kart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syed Mohamad Amiruddin, Syed Saleh (2010) Actuation system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syed Mohd Safwan, Sayed Md Saifuddin (2009) Development of control system for automated guided vehicle (AGV). Faculty of Mechanical Engineering, University Malaysia Pahang.

Tan, Beng Leng (2013) Development of plug-in air powered four wheels motorcycle drivetrain control unit. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tanti Zanariah, Shamshir Ali (2010) Vibration investigation of passenger car front suspension system under various road condition and driving maneuvers. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tee Chor, Shen (2013) Training kits for JPJ. Faculty of Computer System and Software Engineering, Universiti Malaysia Pahang.

Tg Kamarul Azhan, Tg Kamaruddin (2010) Design and fabricate rocket engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tuan Noordiyana , Tuan Ismail (2013) Structural characteristics of chasis model for a technology demonstrator. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang.

Wan Hazmin, Wan Osman (2010) Performance of PID controller for engine speed controller using CVT. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hasif, Wan Haron (2010) Computational fluid dynamics analysis of propeller with and without fins. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Hazwan, Wan Ariff (2008) Design and fabricate antitheft lock for motorcycle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Kamil, Wan Yacob (2011) Analysis of ventilation and heat removing system for Waja car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Rashdan, Wan Mansor (2012) Development of high pressure spray triggering. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Suhaimi, Wan A. Bakar (2007) Design and analysis of vortex generator for UMP HEV using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Nursyazwani, Ibrahim (2013) Design and fabrication of a solid rocket motor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yusri, Yusof (2010) Design and analysis of the solar car body. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zabidi , Mohamad (2008) Investigation of 1-dimensional analysis for two-stroke spark ignition (SI) engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zainurulaini, Zainal Abidin (2010) Risk and mitigation of vehicles parking for Gambang University Malaysia Pahang (UMP). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zajalara, Mat Lazi (2012) Stress analysis of the various dimensions of the spring. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulhilmi, Shafie (2012) Design B-Series propeller of traditional fishing vessel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zulkifli, Nawawi (2012) Vibration investigation for passenger car with different damping characteristics on car suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

This list was generated on Sat Sep 30 06:57:14 2023 +08.

Export as	Atom RSS 1.0 RSS 2.0