Items where Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Number of items: 1296.

Article

A. R. M., Rosdzimin and S. M., Zuhairi and C. S. N., Azwadi (2010) Simulation Of Mixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Ab Hamid, Mohd Rashid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Mokhtar, Abdullah and Wan Rosmanira, Ismail and Zalina, Mohd Ali and Fazli, Idris and Siti Roslindar, Yaziz and Zulkhibri, Mustofa@Ismail (2010) Value-Based Total Performance Excellence Model: An Overview. Jurnal Teknologi (Sciences and Engineering), 52. pp. 95-104. ISSN 0127-9696 (print); 2180-3722 (online). (Published)

Ahmed, Mokhtar Albshir Budiea and Mohd Warid, Hussin and Khairunisa, Muthusamy and Mohamed, Ismail El Gelany (2010) Performance of High Strength POFA Concrete in Acidic Environment. Concrete Research Letters, 1 (1). pp. 14-18. ISSN 2180-1371. (Published)

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) Application of Computational Fluid Dynamics (CFD) Simulations to Spray-Freezing Operations. Drying Technology, 28 (1). pp. 94-102. ISSN 0737-3937. (Published)

Anandharamakrishnan, C. and Jolius, Gimbun and Stapley, Andrew G. F. and Rielly, Chris D. (2010) A Study of Particle Histories During Spray Drying using Computational Fluid Dynamic Simulations. Drying Technology, 28 (5). pp. 566-576. ISSN 0737-3937. (Published)

Awang, Mohd Ghani and Vitasari, Prima and Muhammad Nubli, Abdul Wahab and Othman, Ahmad (2010) A Research for Identifying Study Anxiety Sources among University Students. International Education Studies, 3 (2). pp. 189-196. ISSN 1913-9020. (Published)

Belavendram, N. (2010) Application Of Genetic Algorithms For Robust Parameter Optimization. International Journal of Automotive and Mechanical Engineering (IJAME), 2. pp. 211-220. ISSN 1985-9325(Print); ISSN: 2180-1606 (Online). (Published)

Farzad, Tahriri and Zahari, Taha (2010) The Concept of Integrating Virtual Group (VG) and Agile Supplier Selection (ASS). Journal of Business Management and Economics, 1 (1). pp. 32-37. (Published)

Hafizoah, Kassim and Fatimah, Ali (2010) English Communicative Events and Skills Needed at the Workplace: Feedback From the Industry. English for Specific Purposes, 29 (3). pp. 168-182. ISSN 0889-4906. (Published)

Hafizoah, Kassim and Ng, Wan and Nicholas, Howard (2010) Impact of Multimedia Instructional Materials on Creative Thinking. Pertanika Journal of Social Sciences and Humanities, 18 (S). pp. 97-108. ISSN 0128-7702. (Published)

Herawan, Tutut (2010) Detecting Critical Least Association Rules In Medical Databases. International Journal of Modern Physics: Conference Series, 1 (1). pp. 1-5. ISSN 2010-1945. (Published)

Herawan, Tutut (2010) Rough Clustering For Cancer Datasets. International Journal of Modern Physics: Conference Series, 1 (1). pp. 1-5. ISSN 2010-1945. (Published)

Herawan, Tutut (2010) Soft Set-Based Decision Making For Patients Suspected Influenza-Like Illness. International Journal of Modern Physics: Conference Series, 1 (1). pp. 1-5. ISSN 2010-1945. (Published)

K., Kadirgama and M. M., Noor and M. M., Rahman and R. A., Bakar (2010) Effect of Dry Cutting on Force and Tool Life when Machining Aerospace Material. International Journal of Mechanical and Materials Engineering, 1 (2). (Published)

K., Kadirgama and M. M., Noor and M. R. M., Rejab and M. M., Rahman and M. S. M., Sani and R. A., Bakar and N. M. Zuki, N. M. (2010) Prediction Modeling of Torque in End-milling. WIT Transactions on The Built Environment, 112. pp. 409-418. ISSN 1743-3509. (Published)

K., Kadirgama and M. M., Rahman and M. M., Noor and M. S. M., Sani (2010) Optimised Tool Life by Partial Swarm Optimisation. International Journal of Material Forming, 3 (1). pp. 479-482. (Published)

K., Kadirgama and M. M., Noor and B., Mohammad and H. H., Habeeb (2010) Aspects of Wear Mechanisms of Carbide Tools when Machine Hastelloy C-22HS. Advanced Materials Research, 83-86 . pp. 295-302. ISSN 1022-6680. (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and M. M., Rahman and M. M., Noor and K., Kadirgama (2010) Experimental Investigations Of Oxygen Stripping from Feed Water in a Spray and Tray Type De-Aerator. International Journal of Automotive and Mechanical Engineering (IJAME), 1. pp. 46-65. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

K. V., Sharma and K. V., Suryanarayana and P. K., Sarma and V., Dharma Rao and T., Subramanyam (2010) Oxygen Stripping in Deaerator Feed Water: Condensation on Spray Droplets. Heat and Mass Transfer, 46 (6). pp. 665-673. ISSN 0947-7411. (Published)

Khairunisa, Muthusamy and Mohd Warid, Hussin and Fadhadli, Zakaria (2010) Effect of Mixing Constituent toward Engineering Properties of POFA Cement-Based Aerated Concrete. Journal of Materials in Civil Engineering , 22 (4). pp. 287-295. ISSN 0899-1561. (Published)

Khairunisa, Muthusamy and El Gelany, Mohamed Ismail and Budiea, Ahmed Mokhtar and Hussin, Mohd Warid (2010) Effect of POFA Fineness on Durability of High Strength Concrete. The Indian Concrete Journal, 84 (11). pp. 21-27. ISSN 0019-4565. (Published)

Khairunisa, Muthusamy and Mohd Warid, Hussin (2010) Fire Resistance Properties of Palm Oil Fuel Ash Cement Based Aerated Concrete. Concrete Research Letters, 1 (3). pp. 107-114. ISSN 2180-1371. (Published)

Liew, Siau-Chuin and Liew, Siau-Way and Jasni, Mohamad Zain (2010) Reversible Medical Image Watermarking for Tamper Detection and Recovery with Run Length Encoding Compression. International Journal of Medical, Health, Biomedical, Bioengineering and Pharmaceutical Engineering, 4 (12). pp. 674-678. ISSN 2010-3778. (Published)

M., Ishak and Yamasaki, Kazuhiko and Maekawa, Katsuhiro (2010) Microstructure and Corrosion Behavior of Laser Welded Magnesium Alloys with Silver Nanoparticles. World Academy of Science, Engineering and Technology, 45 (2010). pp. 420-435. ISSN 2010-376x (print), 2010-3778 (online). (Published)

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Modeling of Material Removal on Machining of Ti-6Al-4V through EDM using Copper Tungsten Electrode and Positive Polarity. International Journal of Mechanical and Materials Engineering, 1 (3). (Published)

M. M., Rahman and R. A., Bakar and M. M., Noor and K., Kadirgama (2010) Trends of Air Fuel Ratio on Engine Performance of Four Cylinder Direct Injection Hydrogen Fueled Engine. European Journal of Technology and Advanced Engineering Research, 1. pp. 20-29. ISSN 1433-2248. (Published)

M. M., Noor and K., Kadirgama and M. M., Rahman and H. H., Habeeb and B., Mohammad (2010) Performance of Carbide Cutting Tools when Machining of Nickel Based Alloy. International Journal of Material Forming, 3 (1). pp. 475-478. (Published)

M. M., Yusoff and Mohd S. Azman, Abdul Rahim and Jailani, Salihon and Ibrahim, Abu Bakar and Mohd Rizal, Martua Damanik (2010) Effect of Temperature and Time to the Antioxidant Activity in Plecranthus Amboinicus Lour. Journal of Applied Sciences , 7 (9). pp. 1195-1199. ISSN 1546-9239 (printed), 1554-3641 (online). (Published)

M. R., Abdul Hamid and Zainol, Mustafa and Nur Riza, Mohd Suradi and Mokhtar, Abdullah and Fazli, Idris and Wan Rosmanira, Ismail and Zalina, Mohd Ali and Norkisme, Zainal Abidin (2010) Measuring Leadership Values Based On Value-Based Total Performance Excellence Model (VBTPEM). Business Management Quarterly Review, 1 (3). pp. 64-78. ISSN 2180-2777. (Published)

Ma, Xiuqin and Norrozila, Sulaiman and Qin, Hongwu (2010) Relation between Significance of Attribute Set and Single Attribute. World Academy of Science, Engineering and Technology, 4 (12). pp. 472-474. ISSN 2010-3778. (Published)

Mamta, Rani and Agarwal, Rashi (2010) Effect of Stochastic Noise on Superior Julia Sets. Journal of Mathematical Imaging and Vision, 36. p. 63. ISSN 0924-9907. (Published)

Mohd Ashraf, Ahmad (2010) The Investigations of Command Shaping and Non-collocated PID Schemes in Hybrid Trajectory and Sway Control of a DPTOC System. Research Journal of Applied Sciences, 5 (5). pp. 320-327. ISSN 1815-932X. (Published)

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli and Ahmad Nor Kasruddin, Nasir (2010) Techniques for Sway Control of a Double-Pendulum-Type Overhead Crane. International Journal of Simulation: Systems, Science & Technology (IJSSST), 11 (2 (March 2010)). pp. 1-8. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli and Fairuz Rizal, Mohamad Rashidi (2010) Nonlinear Dynamic Modelling and Analysis of a 3-D Overhead Gantry Crane System with System Parameters Variation. International Journal of Simulation: Systems, Science & Technology (IJSSST), 11 (2 (March 2010)). pp. 9-16. ISSN 1473-8031 (print); 1473-804x (online). (Published)

Mohd Ghani, Awang and Muhammad Nubli, Abdul Wahab and Ahmad, Othman and Prima, Vitasari (2010) The Use of Study Anxiety Intervention in Reducing Anxiety to Improve Academic Performance among University Students. International Journal of Psychologica, 2 (1). pp. 89-95. ISSN 1918-7211. (Published)

Mohd Sabri, Mahmud and Safinski, Tomasz and Nelson, Mark I. and Sidhu, Harvinder S. and Adesina, Adesoji Adediran (2010) Kinetic Analysis of Oleic Acid Esterification Using Lipase as Catalyst in a Microaqueous Environment. Industrial & Engineering Chemistry Research, 49 (3). pp. 1071-1078. ISSN 1520-5045. (Published)

Mohd Zuki, Salleh and Roslinda, Nazar (2010) Mixed Convection Boundary Layer Flow Over a Horizontal Circular Cylinder with Newtonian Heating. Heat and Mass Transfer, 46 (11). pp. 1411-1418. ISSN 0947-7411. (Published)

Muhamad Zuhairi, Sulaiman and M. Rosdzimin, A. R. and N. Azwadi , C. S. (2010) Simulation Ofmixed Convective Heat Transfer Using Lattice Boltzmann Method. International Journal of Automotive and Mechanical Engineering (IJAME), 2 (Jul. pp. 130-143. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Muhammad Nubli, Abdul Wahab and Vitasari, Prima and Ahmad, Othman and Herawan, Tutut and Suriya Kumar, Sinnadurai (2010) The Relationship Between Study Anxiety and Academic Performance among Engineering Students. Procedia Social and Behavioral Sciences, 8. pp. 490-497. ISSN 1877-0428 (print); 1877-0428 (online). (Published)

Muzamir, Hasan and Amizatulhani, Abdullah and Aminaton, Marto (2010) The Correlations and Soil Properties Analysis of Temerloh, Pahang. Journal of Engineering and Technology, 1. pp. 63-74. ISSN 2180-3811 (print); 2289-814X (online). (Published)

N.I, Nik Izual and C.S, Nor Azwadi (2010) Lattice Boltzmann Numerical Scheme for the Simulation of Natural Convection in an Inclined Square Cavity. WSEAS TRANSACTIONS on MATHEMATICS, 9 (6). ISSN ISSN: 1109-2769. (Published)

Nasly, Mohamed Ali and Abu Azam, Md Yassin and Zahrizan, Zakaria and Khairunisa, Muthusamy (2010) Compressed Stabilised Earth as Load Bearing Interlocking Block. International Journal of Civil Engineering and Geo-Environmental, 1 (1). pp. 1-9. ISSN 21802742. (Published)

Ramakrishna, Seeram and Rajan, Jose and Archana, P. S. and Nair, A. S. and Balamurugan, R. and Venugopal, J. and Teo, W. E. (2010) Science and Engineering of Electrospun Nanofibers for Advances in Clean Energy, Water Filtration, and Regenerative Medicine. Journal of Materials Science and Chemical Engineering, 45 (23). 6283 - 6312. ISSN 2327-6045 (print); 2327-6053 (online). (Published)

S. N., Aqida and Brabazon, Dermot and Naher, Sumsun and Kovacs, Z. and Browne, D. (2010) Laser Micro-Processing Of Amorphous And Partially Crystalline cu45Zr48Al7 Alloy. Applied Physics A: Materials Science and Processing, 101. pp. 357-360. (Published)

Sembiring, Rahmat Widia and Jasni, Mohamad Zain (2010) Cluster Evaluation of Density Based Subspace Clustering. Journal of Computing, Volume 2, (Issue 11, November 2010). pp. 14-19. ISSN 2151-9617. (Published)

Sembiring, Rahmat Widia and Jasni, Mohamad Zain and Abdullah, Embong (2010) Clustering High Dimensional Data Using Subspace And Projected Clustering Algorithms. International journal of computer science & information Technology (IJCSIT), Vol.2 (No.4, ). pp. 162-170. ISSN 0975-3826(online); 0975-4660 (Print) . (Published)

Sembiring, Rahmat Widia and Jasni, Mohamad Zain and Abdullah, Embong (2010) A Comparative Agglomerative Hierarchical Clustering Method to Cluster Implemented Course. Journal of Computing, 2 (12). pp. 33-38. ISSN ISSN 2151-9617. (Published)

Siau-Chuin, Liew and Jasni, Mohamad Zain (2010) Experiment of Tamper Detection and Recovery Watermarking in Picture Archiving and Communication Systems. Journal of Computer Science, 6 (7). pp. 794-799. ISSN 1549-3636. (Published)

Siti Norzaimalina, Abd Majid (2010) "Focus in Your Study and Don't Worry": Exploring the Roles of Student Mother in Higher Education Institution in Malaysia. Malaysian Journal of Social Sciences and Humanities (MJ-SSH), 4 (8). pp. 20-28. ISSN 2504­‐8562. (Published)

Sumaiya, Zainal Abidin and Luqman Chuah, Abdullah and Koay, Gregory F. L. and Salmiah, A. and P., Siwayanan and Choonga, Thomas S. Y. (2010) Effect of Solvent Concentration and Cooling Modes on Morphology, Particle Size Distribution, and Yield of Dihydroxystearic Acid (DHSA) Crystals. Particulate Science and Technology, 28 (3). pp. 236-246. ISSN 0272-6351 (Print); 1548-0046 (Online). (Published)

Tay, Joo Hui and Marinah, Mohd Ariffin and Norhayati, Mohd Tahir (2010) Adsorption of formulated chlorpyrifos on selected agricultural soils of Terengganu. The Malaysian Journal of Analytical Sciences, 14 (2). pp. 76-81. ISSN 1394-2506. (Published)

Thamir K., Ibrahim and M. M., Rahman and Abdalla, Ahmed N. (2010) Study on The Effective Parameter of Gas Turbine Model with Intercooled Compression Process. Scientific Research and Essay , 5 (23). pp. 3760-3770. ISSN 1992-2248. (Published)

Zuraina, Ali and Mohd Sahandri, Gani Hamzah and Saifuddin Kumar, Abdullah and Nurul Farhana, Abdullah (2010) The Effects of Using Mobile Device in Learning English Language: A Comparison Through Experimental Study. Malaysian Journal of Educational Technology, 1 (1). pp. 40-60. ISSN 1675 0292. (Published)

Book Chapter

Mohd Ridzuan, Nordin and Yong, Liew Kong (2010) Synthesis of Alumina Nanofibers and Composites. In: Nanofibers. InTech, Rijeka, Croatia, pp. 405-418. ISBN 978-953-7619-86-2

Bulletin

Ahmad, Ibrahim (2010) CMLHS 2010 Appreciation Night. Ilham, 7 . p. 7. ISSN 1985-157X

Ahmad Ziad, Sulaiman (2010) Anak pelajar Malaysia prihatin bantu mangsa gempa bumi. CREATE (17). ISSN 1823-7487

Aisyah Hanum, Abu Bakar (2010) Trailing Pahang’s heritage. Ilham, 7 . p. 1. ISSN 1985-157X

Al-Muhaimin, Ali (2010) UMP di puncak Malaysia. CREATE (54). ISSN 1823-7487

Azian, Abd Rahman (2010) Perpustakaan lancar IR dan Sistem Indeks Perpustakaan UMP. CREATE (49). ISSN 1823-7487

Ezihaslinda, Ngah (2010) Paving our path. Ilham, 6 . p. 4. ISSN 1985-157X

Ezihaslinda, Ngah (2010) The most wanted: IELTS courses. Ilham, 6 . p. 5. ISSN 1985-157X

Faridah, Hamzah (2010) A flying success @ CAMAR. Ilham, 6 . ISSN 1985-157X

Fatina, Bakar (2010) Espansia Club. Ilham, 7 . p. 9. ISSN 1985-157X

Fatina, Bakar and Yanti Salina, Saari (2010) Dual at its best deal. Ilham, 6 . p. 4. ISSN 1985-157X

Gupta, Arun (2010) 10 penyelidik menang pingat di IENA dan Pameran Bio Malaysia. CREATE (19). ISSN 1823-7487

Helmi, Mohamed Isa (2010) Industrial lecture beri pendedahan kepada penyelidik UMP. CREATE (21). ISSN 1823-7487

Husna, Hashim (2010) CMLHS promotes Care to Share. Ilham, 7 . p. 8. ISSN 1985-157X

Husna, Hashim (2010) New KSK line of duty. Ilham, 6 . p. 8. ISSN 1985-157X

Husna, Hashim (2010) SMART calls for SOS. Ilham, 6 . p. 6. ISSN 1985-157X

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) F I S T - SciTEXS creative & innovative annual challenge. Eureka!, 3 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) FIST - RT Biofarm Son. Bhd. collaboration. Eureka!, 3 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Faculty profile: Professor Liew Kong Yong, physical chemist. Eureka!, 3 (1). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Feature: bioinformatics. Eureka!, 3 (1). p. 3. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Graduate student profile: Aini Norhidayah Mohamed, Msc (industrial chemistry) candidate. Eureka!, 3 (1). p. 4. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Industrial link with KANEKA. Eureka!, 3 (1). p. 1. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Reusing, reducing and recycling waste - how citizens can play a major role. Eureka!, 3 (1). p. 2. ISSN 1985-8248

M. M., Yusoff and Saifful Kamaluddin, Muzakir and Nurul Nadia, Abd Razak and Siti Maznah, Kabeb and Noor Suhana, Adzahar (2010) Ungku Omar Ungku Ahmad. Eureka!, 3 (1). p. 3. ISSN 1985-8248

Marziah, Ramli and Noor Azlinda, Zainal Abidin (2010) Intensive MUET @ UMP. Ilham, 6 . p. 9. ISSN 1985-157X

Mimi Sakinah, A. M. (2010) Sustainable production of sorbitol from biomass using green technology approach. Quest, 6 (3). p. 19. ISSN 1985-8159

Mohd Norfarhan, Mohd Mustafa (2010) Program Kembara Hati Siswa Perdana SeMAMPAN pikat penduduk Kampung Nyentil. CREATE (40). ISSN 1823-7487

Mohf Ferdaus, Musa (2010) FKKSA pelopor penubuhan alumni bahagian. CREATE (36). ISSN 1823-7487

Munira, Abdul Razak (2010) SOS & biofeedback at SRK Wira. Ilham, 6 . p. 7. ISSN 1985-157X

Noor Azlan, Ratin and Jamiaah, Noor Rahmad (2010) Our champions! Ilham, 6 . p. 4. ISSN 1985-157X

Nor Azazi, Mamat (2010) UMP johan Perak Suunto Rogaining 12N Night Rogaining Navigation 2010. CREATE (46). ISSN 1823-7487

Norul Fadilah, Abdullah (2010) Pemerkasaan kualiti akademik ke arah lebih inovatif, kreatif dan berdaya saing. CREATE (20). ISSN 1823-7487

Pusat Bahasa Moden & Sains Kemanusiaan, . (2010) Successful service with SUKSIS. Ilham, 6 . p. 1. ISSN 1985-157X

Saharudin, Ramli (2010) CMLHS Trip to Beijing. Ilham, 7 . p. 6. ISSN 1985-157X

Sarah, Zulkiple and Nor Suhardiliana, Sahar (2010) Syafiq & Zahidah the best for English Camp 2010. Ilham, 6 . p. 9. ISSN 1985-157X

Sarinah, Shaari (2010) Peningkatan profesionalisme staf akademik mampu melahirkan pensyarah berkualiti. CREATE (19). ISSN 1823-7487

Suriya Kumar, Sinnadurai (2010) Wishes granted for SMK Cenderawasih. Ilham, 6 . p. 7. ISSN 1985-157X

Syahrina, Ahmad (2010) Duo out for camp. Ilham, 6 . p. 8. ISSN 1985-157X

Tuan Sidek, T. M. (2010) Gleeful days with SK Wira & Mahkota. Ilham, 6 . p. 7. ISSN 1985-157X

Tuan Zairani, Tuan Abd. Rahman (2010) 47 staf terima sumbangan Aidilfitri. CREATE (30). ISSN 1823-7487

UMP, . (2010) 1,000 berkunjung ke Pameran Reka Cipta UMP. CREATE (20). ISSN 1823-7487

UMP, . (2010) 100 pelajar semarakkan semangat sukarelawan. CREATE (49). ISSN 1823-7487

UMP, . (2010) 18 pelajar terima sumbangan bantuan tabung amanah zakat. CREATE (4). ISSN 1823-7487

UMP, . (2010) 2,000 pelajar membanjiri Hari Terbuka Jerman di UMP. CREATE (17). ISSN 1823-7487

UMP, . (2010) 213 pelajar luar bandar didedah suasana kampus. CREATE (32). ISSN 1823-7487

UMP, . (2010) 25 pelatih Kor SUKSIS sulung terima pentauliahan. CREATE (44). ISSN 1823-7487

UMP, . (2010) 4 penyelidik muda menyerlah di Hanoi. CREATE (34). ISSN 1823-7487

UMP, . (2010) 5,000 warga UMP sambut aidilfitri bersama Sultan Pahang. CREATE (8). ISSN 1823-7487

UMP, . (2010) 600 sertai Symbion dedah kesedaran bioteknologi. CREATE (44). ISSN 1823-7487

UMP, . (2010) 7 sahabat baik tubuh syarikat perniagaan. CREATE . pp. 42-43. ISSN 1823-7487

UMP, . (2010) 870 pelajar curah bakti di Kampung Tanjung Selangor. CREATE (48). ISSN 1823-7487

UMP, . (2010) Around the world in 1 day: beri pendedahan global kepada mahasiswa UMP. CREATE (16). ISSN 1823-7487

UMP, . (2010) Bidang penulisan bantu UMP capai visi ke peringkat antarabangsa. CREATE (33). ISSN 1823-7487

UMP, . (2010) Canselor saran UMP suburkan semangat kesukarelawan. CREATE (4). ISSN 1823-7487

UMP, . (2010) Ceramah kemerdekaan pupuk semangat warga UMP cintakan negara. CREATE (24). ISSN 1823-7487

UMP, . (2010) Engenius juara Konvensyen KIK Peringkat UMP. CREATE (25). ISSN 1823-7487

UMP, . (2010) Expoconvo UMP tarik perhatian masyarakat Pahang. CREATE (40). ISSN 1823-7487

UMP, . (2010) Graduan UMP terpilih ceburi industri aeroangkasa. CREATE (42). ISSN 1823-7487

UMP, . (2010) Jabatan Pendaftar anjur Hari Bertemu Pelanggan. CREATE (31). ISSN 1823-7487

UMP, . (2010) Kasih ibu sampai ke syurga: anak OKU terima Diploma Sains Komputer. CREATE (15). ISSN 1823-7487

UMP, . (2010) Kelab Kebajikan PNC bantu wanita sindrom down. CREATE (27). ISSN 1823-7487

UMP, . (2010) Kerjasama antarabangsa UMP, KUAS pertingkat industri pembuatan acuan. CREATE (36). ISSN 1823-7487

UMP, . (2010) Konvokesyen UMP ke-5 1,030 pelajar terima ijazah dan diploma. CREATE (10). ISSN 1823-7487

UMP, . (2010) Kursus sembelihan dapat sambutan menggalakkan. CREATE (31). ISSN 1823-7487

UMP, . (2010) MATAHARI anjur kem cuti sekolah ‘Anak Soleh’. CREATE (26). ISSN 1823-7487

UMP, . (2010) MB Pahang dianugerah Ijazah Kehormat Doktor Falsafah (Pengurusan Teknologi). CREATE (5). ISSN 1823-7487

UMP, . (2010) MB Pahang rasmi Cendekia Bitara. CREATE (6). ISSN 1823-7487

UMP, . (2010) Mahasiswa berinovasi negara lestari. CREATE (39). ISSN 1823-7487

UMP, . (2010) Mahasiswa digesa bina kecemerlangan diri, tingkat kemahiran insaniah. CREATE . ISSN 1823-7487

UMP, . (2010) Mahasiswa merakyatkan seni budaya warisan zaman. CREATE (45). ISSN 1823-7487

UMP, . (2010) Makmal UMP diiktiraf dunia, yakinkan industri. CREATE (24). ISSN 1823-7487

UMP, . (2010) Malam Pesta Cahaya UMP bertemakan ‘1Malaysia’ meriah. CREATE (37). ISSN 1823-7487

UMP, . (2010) Menteri Pengajian Tinggi adakan lawatan kerja ke UMP Pekan. CREATE (9). ISSN 1823-7487

UMP, . (2010) Moh Main Boling jalin kemesraan UMP dan Media Pahang. CREATE (53). ISSN 1823-7487

UMP, . (2010) Mohamad Hafifi selesaikan sebarang masalah tanpa menunding jari. CREATE (47). ISSN 1823-7487

UMP, . (2010) NC lancar Portal Alumni UMP. CREATE (38). ISSN 1823-7487

UMP, . (2010) NC sampaikan syarahan sulung sebagai Profesor Tamu Universiti Hebei. CREATE (16). ISSN 1823-7487

UMP, . (2010) Naib Canselor terima anugerah AGBA. CREATE (12). ISSN 1823-7487

UMP, . (2010) Naib Canselor terima pengurniaan tauliah Kepten Kehormat PSSTLDM. CREATE (15). ISSN 1823-7487

UMP, . (2010) PERKASA, CHEST juara Debat Piala Naib Canselor. CREATE (46). ISSN 1823-7487

UMP, . (2010) Pasukan UMP sahut cabaran ke pertandingan inovasi dan kreativiti. CREATE (43). ISSN 1823-7487

UMP, . (2010) Pasukan futsal senior dan olah raga beraksi cemerlang di SUKUM Ke-53. CREATE (52). ISSN 1823-7487

UMP, . (2010) Pelajar nikmati juadah berbuka puasa percuma sepanjang ramadan. CREATE (47). ISSN 1823-7487

UMP, . (2010) Penerapan pengalaman sebenar PM Ir. Adnan tarik minat pelajar. CREATE (18). ISSN 1823-7487

UMP, . (2010) Penyelidik muda UMP kian bersinar – Norashikin. CREATE (26). ISSN 1823-7487

UMP, . (2010) Penyelidik wanita UMP menang anugerah khas WIPO Best Women Inventor di ITEX 2010. CREATE (21). ISSN 1823-7487

UMP, . (2010) Rumah terbuka pelajar antarabangsa UMP rapatkan ummah. CREATE (18). ISSN 1823-7487

UMP, . (2010) Sultan Pahang rasmi Jejak Warisan di UMP. CREATE (6). ISSN 1823-7487

UMP, . (2010) Tiga pasangan suami isteri terima APC. CREATE (30). ISSN 1823-7487

UMP, . (2010) UMP - NIU jalin kerjasama akademik. CREATE (32). ISSN 1823-7487

UMP, . (2010) UMP catat kejayaan besar di Pertandingan Inovasi, Ciptaan dan Reka Bentuk Peringkat Kebangsaan. CREATE (22). ISSN 1823-7487

UMP, . (2010) UMP di tempat kedua dalam NACES 2010. CREATE (35). ISSN 1823-7487

UMP, . (2010) UMP jalin kerjasama dengan Universiti Sarajevo. CREATE (32). ISSN 1823-7487

UMP, . (2010) UMP jalin kerjasama strategik Universiti Industri. CREATE (8). ISSN 1823-7487

UMP, . (2010) UMP juara sepak takraw Akhir Grand Prix Pahang. CREATE (46). ISSN 1823-7487

UMP, . (2010) UMP pamerkan kreativiti di Karnival Malaysia Inovatif 2010 Zon Timur. CREATE (23). ISSN 1823-7487

UMP, . (2010) UMP pertingkat prasarana jalur lebar. CREATE (25). ISSN 1823-7487

UMP, . (2010) UMP pusat sukan tumpuan bola keranjang. CREATE (45). ISSN 1823-7487

UMP, . (2010) UMP raih Anugerah Teknologi Hijau di NRIC 2010. CREATE (23). ISSN 1823-7487

UMP, . (2010) UMP sumbang 400 buah buku galak budaya membaca. CREATE (41). ISSN 1823-7487

UMP, . (2010) UMP terbit buletin bahasa Inggeris ketengahkan nama Pekan. CREATE (7). ISSN 1823-7487

UMP, . (2010) UMP terima RM1.085 JUTA - CENFED, UMPH hargai kerjasama agensi. CREATE (11). ISSN 1823-7487

UMP, . (2010) UMP terima penghargaan Rangka Pelan Tindakan Strategik Biodiversiti-Bioteknologi Negeri Pahang. CREATE (5). ISSN 1823-7487

UMP, . (2010) UMP tubuh GACC. CREATE (13). ISSN 1823-7487

UMP, . (2010) UMP tubuh Sekretariat Rukun Negara. CREATE (28). ISSN 1823-7487

UMP, . (2010) UMP, Miyazu perkasakan industri pembuatan acuan. CREATE (38). ISSN 1823-7487

UMP, . (2010) UMP, PSIP muafakat perkasakan agenda kesukarelawanan. CREATE (37). ISSN 1823-7487

UMP, . (2010) UMP- KMPh jayakan Program Perkongsian Pintar. CREATE (39). ISSN 1823-7487

UMP, . (2010) Usia 54 tahun tidak halang Ghani cipta kejayaan. CREATE (14). ISSN 1823-7487

UMP, . (2010) Warga UMP hayati Kemerdekaan pada bulan Ramadan. CREATE (29). ISSN 1823-7487

UMP, . (2010) X-plorasi berakit UMP-KPT himpun 455 peserta IPT. CREATE (50). ISSN 1823-7487

UMP, PNC (2010) Best Women Inventor’s Special Award at ITEX 2010. Quest, 6 (3). p. 1. ISSN 1985-8159

UMP, PNC (2010) Buku Program Kejohanan Badminton PERTAP 2010. Program UMP . pp. 1-6. (Unpublished)

UMP, PNC (2010) CENFED spreads wings to Sabah, Sarawak. Quest, 6 (3). p. 4. ISSN 1985-8159

UMP, PNC (2010) HICOM Automotive celebrates 1st batch of graduates. Quest, 6 (3). p. 4. ISSN 1985-8159

UMP, PNC (2010) Majlis Meraikan Kejayaan. Program UMP . pp. 1-9. (Unpublished)

UMP, PNC (2010) Memorandum of Agreement (MoA). Quest, 6 (3). pp. 14-15. ISSN 1985-8159

UMP, PNC (2010) Synergy bags award, UMP clocks RM85k in book sales. Quest, 6 (3). p. 24. ISSN 1985-8159

UMP, PNC (2010) Technical services & consultancy UMP. Quest, 6 (3). pp. 6-9. ISSN 1985-8159

UMP, PNC (2010) UMP kicks off final audit for OSH award. Quest, 6 (3). p. 10. ISSN 1985-8159

UMP, PNC (2010) UMP researchers shine at MTE 2010. Quest, 6 (3). p. 2. ISSN 1985-8159

UMP, PNC (2010) UMP’s Centralized Analysis Laboratory already in operation. Quest, 6 (3). pp. 10-11. ISSN 1985-8159

UMP, PNC (2010) University-Industry Forum 2010. Quest, 6 (3). pp. 16-17. ISSN 1985-8159

Wan Jumani, Fauzi (2010) English for T&L. Ilham, 6 . p. 5. ISSN 1985-157X

Wan Jumani, Fauzi (2010) Galvanising SMK baging with English. Ilham, 6 . p. 6. ISSN 1985-157X

Wan Jumani, Fauzi (2010) KIPSAS goes back to basics. Ilham, 7 . p. 5. ISSN 1985-157X

Wan Jumani, Fauzi (2010) No more diffidence. Ilham, 6 . p. 5. ISSN 1985-157X

Wan Nazrul Helmy, Wan Mohd Zain (2010) UMP sedia jalin kerjasama dengan NWUN. CREATE (33). ISSN 1823-7487

Wan Nazrul Helmy, Wan Mohd Zain (2010) UMP, SCUN jalin kerjasama akademik. CREATE (33). ISSN 1823-7487

Yanti Salina, Saari (2010) CMLHS pioneering UMP-German programme. Ilham, 7 . p. 4. ISSN 1985-157X

Yong, Ying Mei (2010) Walked and talked with Mandarin. Ilham, 6 . p. 9. ISSN 1985-157X

Zailin Shah, Yusoff (2010) The end of 1 PIE chapter. Ilham, 6 . p. 8. ISSN 1985-157X

Zularisam, A. W. (2010) Development of clean renewable fuel from wastewater towards a sustainable energy source using green technology approach: HEC2. Quest, 6 (3). p. 18. ISSN 1985-8159

Conference or Workshop Item

Abd Jalil, Borham (2010) Jejak Warisan Pahang Pencetus Tamadun Pembangunan Modal Insan Holistik. In: Seminar Kebangsaan Jejak Warisan Negeri Pahang: Wacana Mengingati Sejarah Ke Arah Kecemerlangan Masa Depan , 24 Sept 2010 , Dewan Astaka, Universiti Malaysia Pahang. .

Abd Jalil, Borham (2010) Modul pembangunan insan holistik (MPIH) dalam menangani cabaran global. In: Persidangan Serantau Pendidikan Islam , 24-25 July 2010 , Hotel Holiday Inn, Shah Alam, Selangor. pp. 1-14.. (Unpublished)

Abdul Adam, Abdullah (2010) A Study On Spray Characteristics Of Straight Vegetable Oil. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Achmad Fauzi, Abdul Wahab and Wan Mohd Nazmi, Wan Abdul Rahman and Usama Juniansyah, Fauzi (2010) Subgrades Stabilization of Kuantan Clay Using Fly Ash and Bottom Ash. In: The 8th Internationational Conference on Geotechnical & Transportation Engineering (GEOTROPIKA 2010) , 2010 , Sutera Harbour, Sabah. .

Ahmad Nasaruddin, Sulaiman and Asiah, Kassim (2010) Do you really understand what you read? In: Borneo International Conference on Language and Literature , 2010 , Kuching, Sarawak. pp. 1-7.. (Unpublished)

Ahmad Rasdan, Ismail (2010) Biomechanics Analysis And Optimization Of Instep Kicking: A Case Study To Malaysian Footballer. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Ahmad Rasdan, Ismail (2010) Ergonomics Assessment Of Workstation Design In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Influence of Wet-Bulb Globe Temperature (WBGT) Towards Workers' Performance: An Anova Analysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 435-441.. ISBN 978-967-5080-9501 (CD ROM)

Ahmad Rasdan, Ismail (2010) Regression Analysis In Determining The Influence Of Relative Humidity Towards Workers' Performance. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) A Review Onwhole Body Vibrations Towards Human. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Thermal Comfort In A Closed Air Conditioned ICT Laboratory At Ungku Omar Polytechnic Malaysia. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Ahmad Rasdan, Ismail (2010) Assessment Of Noise Impact: A Case Study Dueto Aircraft Activities. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ahmad Rasdan, Ismail (2010) Case Study Of ISO/TS16949 Application In Automotive Industry. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Aini, Ahmad and Burgoyne, John and Weir, David (2010) The Learning Organization from an Islamic Perspective: A Case Study in Islamic Organization. In: Conference Proceedings of 8th International Academy of Management and Business (IAMB 2010) , 28-30 June 2010 , Complutense University of Madrid, Madrid, Spain . .

Amirruddin, Abdul Kadir and Mohd Razali, Hanipah (2010) Development Of A High Pressure Chamber For Spray Vessels. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Ariyono, S. and Cholis, N. (2010) A Review On Control Strategy For Electro-Mechanical Rubber Belt Continuously Variable Transmissions (CVT). In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Asar, Abdul Karim (2010) Islamization of science & technology: theory and reality. In: International Conference on Science and Technology , Johor Bahru. pp. 1-4.. (Unpublished)

Asiah, Kassim and Ahmad Nasaruddin, Sulaiman (2010) Motivation in second language learning: Technology inside and outside classroom. In: Borneo International Conference on Language and Literature , 7-9 June 2010 , Kuching, Sarawak. pp. 1-8.. (Unpublished)

Azizan, Ramli and Tuan Sidek, Tuan Muda (2010) Pembangunan teknologi dan konservasi alam di dalam perspektif Islam. In: International Conference on Arts, Social Sciences and Technology 2010 , 2010 , The Gurney Hotel, Pulau Pinang. pp. 1-12.. (Unpublished)

Azmi, W. H. and Sharma, K. V. (2010) Estimation of Forced Convection Heat Transfer Coefficient of Nanofluids using Concept of Colburn Analogy. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 852-862.. ISBN 978-967-0120-04-1

Azmi, W. H. and Sharma, K. V. (2010) Influence Of Certain Thermo-Physical Properties On Prandtl Number Of Water Based Nanofluids. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 502-515.. ISBN 978-967-5080-9501

C.S, Nor Azwadi and N.I.N, Ibrahim (2010) Lattice Boltzmann Numerical Prediction of Natural Convection Heat Transfer in an Inclined Square Enclosure. In: DSFD 2010 , 5-9 July 2010 , CNR- Piazzale Aldo Moro 7- Rome. pp. 1-11..

Cheng, C. K. (2010) Application of Co/Al2O3 Catalyst in Steam Reforming of Glycerol. In: CHEMECA 2010 , 26 - 29 September 2010 , Hilton Adelaide, South Australia. pp. 1-11..

Cheng, C. K. (2010) Steam Reforming Of Glycerol Over Alkali promoted Co-Ni/Al2o3 Catalysts. In: CHEMECA 2010 , 26 - 29 September 2010 , Hilton Adelaide, South Australia. pp. 1-11..

Chui Yan, Yap (2010) Perwaja Steel: Case and Instructor's Manual. In: North America Case Research Association (NACRA) 2010 Annual Meeting , 28-30 October 2010 , Edgewater Hotel & Conference Centre, Gatlinburg, Tennessee, USA. . (Unpublished)

D., Ramasamy and Samykano, Mahendran (2010) Evaluation Of A Two Stroke Compressed Natural Gas Mixer Design By Simulation And Experimental Techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Samykano, Mahendran and K., Kadirgama (2010) Design Of Compressed Natural Gas Mixer Using Computational Fluid Dynamics. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

D., Ramasamy and Mahendran, Samykano and Zainal Ambri, Abdul Karim and T., Nagarajan (2010) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 1589-1592., II. ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

D., Ramasamy and Mahendran, Samykano and Zamri, Mohamed and S., Vijayan (2010) Design Optimization of Air Intake System (AIS) of 1.6L Engine by Adding Guide Vane. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Vol II , 17-19 March 2010 , Hong Kong. pp. 999-1003., 2181. ISSN ISSN 978-988-18210-5-8 ISBN 2078-0958 (Print); 2078-0966 (Online)

Da, Wen Ge (2010) A Review On Continuously Variable Transmissions Control. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Fakir, Md Moslemuddin and M. M., Rahman and R. A., Bakar and S., Basri (2010) One-Dimensional Heat Transfer in a Convection-Tip Rectangular Thin Fin: A Comparative Study. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. pp. 12-22.. ISBN 978-967-0120-04-1

Gan, Leong Ming (2010) Conceptual Design Of Photothermal Electrochemical Water Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Gan, Leong Ming and R. A., Bakar (2010) Development Of Multi Duty Cycle Sequential Gated Pulse Frequency Generator For Resonant Electrolysis. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Hafizoah, Kassim and Ng, Wan and Nicholas, Howard (2010) Can Multimedia Learning Tools Enhance Creative Thinking? In: The Second Asian Conference on Education , 2-5 December 2010 , Osaka, Japan. pp. 1-11..

Hasan, Ahmad and Abd Jalil, Borham (2010) Programme Development Of A Degree In A Halal Administration: Experience In Curriculum Design In University Malaysia Pahang. In: International Conference Of Education, Research And Innovation (Iceri) , 15 – 17 Nov 2010 , Madrid. pp. 1-8..

Hazizulden, Abd Aziz and Nik Mohd Kamil, Nik Yusof and M. H., Abu Talip (2010) GPS Tracking System for Low Maintenance Application. In: International Conference on Embedded System and Microprocessor (ICESM2010) , 4-6 December 2010 , Century Park Hotel, Manila, Philippines. pp. 1-5.. (Unpublished)

Heng, Fong Wan and Nor Haniza, Sarmin and Yuhani, Yusof (2010) Bio-Mathematical Concepts in DNA Splicing System. In: 4th South East Asian Technical University Consortium Symposium (SEATUC 2010) , 24-26 February 2010 , Universiti Teknologi Malaysia, Johor Bharu, Malaysia. pp. 147-150.. ISSN 1882-5796

Khairunisa, Muthusamy and Nasly, Mohamed Ali and Mohd Warid, Hussin and Norhaiza, Nordin and Zahrizan, Zakaria (2010) Properties of Aerated Concrete Containing Various Amount of Palm Oil Fuel Ash, Water Content and Binder Sand Ratio. In: 2nd International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2010) , 2-4 November 2010 , Cairo. pp. 391-395.. ISSN 978-1-4244-8748-6

Lee, Chia Kuang and Hasahudin, Hassan and Nurhaizan, Mohd Zainudin (2010) Towards Zero Accidents In Construction Projects : Promoting Hirarc As An Effective Tools To Reduce Accidents. In: 3rd International Graduate Conference On Engineering, Sciences & Humanities (IGCESH 2010) , 02-04 November 2010 , Universiti Teknologi Malaysia Johor Bahru, Johor. pp. 1-3..

Liew, Siau-Chuin and Jasni, Mohamad Zain (2010) Reversible Medical Image Watermarking for Tamper Detection and Recovery. In: 3rd IEEE International Conference on Computer Science and Information Technology (ICCSIT 2010) , 9-11 July 2010 , Chengdu, China. pp. 417-420., 5. ISBN 978-1-4244-5540-9

Liew, Siau-Chuin and Jasni, Mohamad Zain (2010) Watermark Embedder and Detector for Medical Images: The Requirements and Design. In: IEEE The Second International Conference on Computer Research and Development 2010 , 7-10 May 2010 , Kuala Lumpur . pp. 30-33.. ISBN 978-0-7695-4043-6

M. F. F., Ab Rashid and Mohd Rizal, Abdul Lani (2010) Surface Roughness Prediction for CNC Milling Process using Artificial Neural Network. In: Proceedings of the World Congress on Engineering 2010 , 30 June - 2 July 2010 , London, UK. pp. 2219-2224..

M. M., Noor (2010) Experimental mnd Modeling Investigation of The Performance Characteristics on Diesel Hcci with Hydrogen Additive- A Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Noor and K., Kadirgama and M. M., Rahman (2010) Analysis of Auto Car Jack. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 MAY 2010 , Universiti Malaysia Pahang. .

M. M., Rahman and K., Kadirgama and M. M., Noor (2010) Artificial Intelligence Techniques for Machining Performance: a Review. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar (2010) Influence of Engine Speed and Injection Timings on In-Cylinder Heat Transfer for Port Injection Hydrogen Fueled Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and M. M., Noor and K., Kadirgama and R. A., Bakar and Z., Husin (2010) Prediction of Fatigue Life on Lower Suspension Arm Subjected To Variable Amplitude Loading. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. M., Rahman and Thamir K., Ibrahim (2010) Effects of Operation Conditions on Performance of a Gas Turbine Power Plant. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M. R., Islam (2010) Effect Of Coupling Agent On Mechanical Properties Of Composite From Kenaf And Recycled Polypropylene. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . ISBN 978-967-0120-04-1

M. S., Shaari and M. M., Rahman and M. M., Noor and K., Kadirgama and A. K., Amiruddin (2010) Design of Connecting Rod of Internal Combustion Engine: a Topology Optimization Approach. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

M.F, Yusoff (2010) Evaluation Of Acoustic Emission Behavior Under Hydrostatic Test In Api 5l X70 Steel Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Ma, Xiuqin and Norrozila, Sulaiman and Qin, Hongwu and Herawan, Tutut (2010) A novel normal parameter reduction algorithm of soft sets. In: 15th Online World Conference on Soft Computing in Industrial Applications (WSC15) , 15-27 November 2010 . pp. 221-229., 96. ISSN 1867-5662 ISBN 978-364220504-0

Mahendran, Samykano (2010) Micro-Edm:Overview And Recent Developments. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Maisara Mohyeldin, Gasim Mohamed and Amirruddin, Abdul Kadir (2010) Effect of Cam Profile On Cylinder Pressure In Revetec Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mansor, Sulaiman (2010) Sunnah Allah Berkaitan Jatuh Dan Bangun Tamadun Manusia Menurut Al Quran Dan Hubungannya Dengan Proses Pendidikan Akhlak: Suatu Kajian. In: Persidangan Serantau Pendidikan Islam , 24-25 July 2010 , Hotel Holiday Inn, Shah Alam. pp. 1-23..

Mazlina, Abdul Majid and Siebers, Peer-Olaf and Aickelin, Uwe (2010) Modelling Reactive and Proactive Behaviour in Simulation. In: Proceedings of the 2010 Operational Research Society Simulation Workshop (SW10) , 23-24 March 2010 , Worcestershire, England. .

Mohamed Reza Zalani, Mohamed Suffian and Mas Ayu, Hassan and Siti Haryani, Tomadi and Rosdi, Daud (2010) Effects Of Polarity Parameter On Machining Of Tool Steel Workpiece Using Electrical Discharge Machining. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohamed Reza Zalani, Mohamed Suffian and M. A., Hamdi and Azmir, Azhari (2010) Optimization of EDM Injection Flushing Type Control Parameters Using Grey Relational Analysis on AISI 304 Stainless Steel Workpiece. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. . ISBN 978-967-5080-9501

Mohd Akramin, Mohd Romlay and Amirruddin, Abdul Kadir and Nasrul Azuan, Alang (2010) Hybrid Finite Element And Monte Carlo Analysis Of Cracked Pipe. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Anwar, Zawawi and Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail (2010) Hybrid Collocated PD with Non-collocated PID for Sway Control of a Lab-scaled Rotary Crane. In: 5th IEEE Conference on Industrial Electronics and Applications, ICIEA 2010 , 15-17 June 2010 , Taichung. pp. 707-711..

Mohd Ashraf, Ahmad (2010) Non-collocated Fuzzy Logic and Input Shaping Control Strategy for Elastic Joint Manipulator: Vibration Suppression and Time Response Analysis. In: Fourth Asia International Conference on Mathematical/Analytical Modelling and Computer Simulation (AMS2010) , 26 - 28 May 2010 , Kota Kinabalu, Borneo. .

Mohd Ashraf, Ahmad and Mohd Helmi, Suid and Mohd Syakirin, Ramli (2010) PD Fuzzy Logic with Non-collocated PID Approach for Vibration Control of Flexible Joint Manipulator. In: 6th International Colloquium on Signal Processing and Its Applications 2010 , 21-23 May 2010 , Melaka, Malaysia. pp. 1-5..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail (2010) Composite PD and Fuzzy Logic Approach for Vibration of Elastic Joint Manipulator. In: International Conference on Control, Automation and Systems 2010 , 27-30 Oct 2010 , Gyeonggi-do, Korea. pp. 2175-2180..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli (2010) Comparative Assessment of Feed-forward Schemes with NCTF for Sway and Trajectory Control of a DPTOC. In: International Conference on Intelligent and Advanced Systems, ICIAS 2010 , 15-17 June 2010 , Kuala Lumpur, Malaysia. pp. 1-6..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli (2010) Control Strategy for Active Vibration Suppression of Flexible Robot Manipulator. In: IEEE International Conference on Information and Automation, ICIA 2010 , 20-23 June 2010 , Harbin, Heilongjiang, China. pp. 741-746..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli (2010) Investigations Of NCTF With Input Shaping For Sway Control Of A Double-Pendulum-Type Overhead Crane. In: 2nd IEEE International Conference on Advanced Computer Control, ICACC 2010 , 27-29 March 2010 , Shenyang. pp. 456-461..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli (2010) Vibration Control Strategy for Flexible Joint Manipulator: A Fuzzy Logic Control Approach. In: IEEE Symposium on Industrial Electronics and Applications 2010 , 3-5 Oct.2010 , Penang, Malaysia. pp. 469-474..

Mohd Ashraf, Ahmad and Raja Mohd Taufika, Raja Ismail and Mohd Syakirin, Ramli and Najidah, Hambali and Nurul Hazlina, Noordin (2010) Active Sway Control of a Lab-Scale Rotary Crane System. In: The 2nd International Conference on Computer and Automation Engineering (ICCAE 2010) , 26-28 Februari 2010 , Singapore. 408-412 ..

Mohd Ashraf, Ahmad and Mohd Anwar, Zawawi (2010) Comparison of Optimal and Intelligent Sway Control for a Lab-Scale Rotary Crane System. In: The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010) , 19-21 Mac 2010 , Bali Island, Indonesia. pp. 229-234..

Mohd Ashraf, Ahmad and Mohd Syakirin, Ramli and Mohd Anwar, Zawawi and Raja Mohd Taufika, Raja Ismail (2010) Implementation of Input Shaping in Hybrid Control Schemes of a Lab-Scaled Rotary Crane System. In: International Conference on Industrial Technology , 14-17 Mac 2010 , Vi a del Mar, Chile. pp. 530-534..

Mohd Azrul Hisham, Mohd Adib (2010) Computational Analysis: Fluid Structure Interaction Model Of The Mitral Valve Leaflet. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Syakirin, Ramli and Najidah, Hambali and Mohd Ashraf, Ahmad and Shahrizal, Saat (2010) Computer-Based System For Calibration Of Temperature Transmitter Using Rtd. In: 3rd International Conference On Information Management, Innovation Management And Industrial Engineering (Iciii2010) , 26 – 28 Nov. 2010 , Kunming, Yunnan Province, China. . (Unpublished)

Mohd Yusof, Taib (2010) Acoustic Emission Study Of Fatigue Crack Growth In Rail Track Material. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Mohd Yusof, Taib (2010) Analysis Of Functional Build (FB) In Aluminium Extrusion Process Innovation By Using Arena Software. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib (2010) Design And Development Of A Single Vane Rotating Sleeve Rotary Compressor For Refrigeration System. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Yusof, Taib and Azizuddin, Abd Aziz (2010) Performance Analysis Of A Domestic Refrigerator. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Mohd Zuki, Salleh and Najihah, Mohamed and Rozieana, Khairuddin and Najiyah Safwa, Khasi’ie and Roslinda, Nazar (2010) Numerical Investigation Of Free Convection Over A Permeable Horizontal Flat Plate Embedded In A Porous Medium With Radiation Effects And Mixed Thermal Boundary Conditions. In: Proc. 2nd International Conference on Mathematical Sciences , 30 November - 3 December 2010 , 2010 PWTC, Kuala Lumpur. pp. 531-538..

Mohd. Shafie, Bakar and Nasrudin, Abd. Rahim and Kamarul Hawari, Ghazali (2010) Analysis of Various PWM Controls on Single-Phase Z-Source Inverter (J113). In: 2010 IEEE Student Conference on Research and Development (SCORED) , 13-14 December 2010 , IOI Palm Garden Hotel, Putrajaya, Malaysia. pp. 1-4.. ISBN 978-1-4244-8648-9

Mon, Thet Thet and Z., Ghazalli and Asnul Hadi, Ahmad and Mohd Fazli, Ismail and Khairul Fikri, Muhammad (2010) Design of Electrostatic Comb Actuators based on Finite Element Method. In: International Conference on Enabling Science and Nanotechnology (ESciNano 2010) , 1-3 December 2010 , Kuala Lumpur. pp. 1-3..

Moorthy, M. (2010) Performance Of Solar Air-Conditioning System Using Heat Pipe Evacuated Tube Collector. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Hatifi, Mansor (2010) Intelligent Active Force Control Applied To Precise Machine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Ikram, Mohd Rashid and Makbul, Anwari (2010) Power Quality Analysis Of Grid-Connected Photovoltaic System With Adjustable Speed Drives. In: International Conference On Control Automation And Systems (Iccas 2010) , 27 – 30 Oct. 2010 , Kintex, Seoul, South Korea. . (Unpublished)

Muhammad Saifuddin, Idris and N. M. M., Ammar (2010) 2d Deep Cavity Flow, Lid Driven Using Conventional Methodwith New Perspective. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Muhammad Salihin, Saealal (2010) Robust Feed-forward Schemes for Pitch Angle Control of Unmanned. In: International Conference on Underwater System Technology: Theory and Applications 2010 (USYS' 10) , 1-2 November 2010 , Cyberjaya, Malaysia. pp. 1-10..

Najidah, Hambali and Shahrizal, Saat and Ahmad Nor Kasruddin, Nasir and Mohd Ashraf, Ahmad (2010) Computer-Based System For Temperature Measurement Calibration Of Type-K Thermocouple. In: 2010 International Conference On Modeling, Simulation And Control (Icmsc 2010) , 02-04 November 2010 , Cairo, Egypt. .

Nik Aloesnita, Nik Mohd Alwi and Zailin Shah, Yusoff (2010) Wiki for the Academic Writing Classroom. In: The 18th International Conference on Computer in Education , 29 November -3 December 2010 , Putrajaya. pp. 1-9..

Nik Mohd Kamil, Nik Yusof and Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali (2010) MINI 11 a Microcontroller Laboratory Hardware Platform with IDE Approach. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2010) , 28 June 2010 , Melaka. pp. 65-68..

Noor Azlinda, Zainal Abidin (2010) IM DILEMMA: From educators' perspective. In: 19th MELTA International Conference 2010 , 17-18 June 2010 , Kuala Lumpur. . (Unpublished)

Nurul Nazihah, Hawari and Razman, Mat Tahar (2010) System Dynamic Simulation Model for Higher Education Strategic Planning. In: Asian Pacific Operational Research Conference (APORS) 2010 , 4-8 Dicember 2010 , Bayview Beach Resort Hotel, Ferringhi Penang. pp. 1-6..

R., Mamat (2010) Comparative Study On Diesel Engine Performance Operatingwith Biodiesel And Diesel Fuel. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

R., Mamat (2010) One-Dimensional Simulation For Single Cylinder Diesel Engine Operating With Ethanol. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar (2010) Design And Developmentof Actuation Part Of Piezoelectric Generator Prototyping For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

R. A., Bakar (2010) Development Assessment Of Solar Concentrating Power System for Green Energy Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. .

Raja Mohd Taufika, Raja Ismail and Ahmad Nor Kasruddin, Nasir and Mohd Ashraf, Ahmad (2010) Performance Comparisan Between Sliding Mode Control (Smc) And Pd-Pid Controllers For A Nonlinear Inverted Pendulum System. In: International Conference On Control, Automation, Robotics & Vision (Iccarv 2010) , 27 – 29 June 2010 , Holiday Inn Hotel, Paris, France. . (Unpublished)

S.M, Saufi and Conan, J.Fee (2010) Batch Adsorption of Whey Protein onto Anion Exchange Mixed Matrix Membrane Chromatography. In: 2010 2nd International Conference on Chemical, Biological and Environmental Engineering , 2-4 November 2010 , Cairo, Egypt. .

S.N.S, Jamaludin and R. A., Bakar (2010) Experimental Performance Testing Of The Actuation Part Of Piezoelectric Generator For Alternative Power Generation. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Saad, Saima and Abdullah, Ibrahim and Saad Khan, Muhammad (2010) Mass Customization Method For Higher Education. In: 3rd International Graduate Conference On Engineering, Sciences & Humanities (Igcesh) 2010 , 02 – 04 Nov. 2010 , UTM, Johor Bahru,Johor. . (Unpublished)

Santoso, W. B. and Ariyono, S. (2010) Combustion Characteristics Of A Diesel- Hydrogen Dual Fuel Engine. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. . ISBN 978-967-0120-04-1

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) Designing of An Embedded Flexible Multi-Microcontroller Based Training System. In: International Conference on Advanced Infocomm Technology (ICAIT 2010) , 20th July 2010 , Hainan, China. pp. 556-561..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) Designing of Flexible Multi-Microcontroller Based Training System. In: 3rd International Conference on Computer and Electrical Engineering (ICCEE 2010) , 16 November 2010 , Chengdu, China. pp. 145-150..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) Designing of Multi-Microcontroller Training System. In: 2nd International Conference on Electronic Computer Technology (ICECT 2010) , 7 May 2010 , Kuala Lumpur. pp. 257-262..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) Designing of a Multi-Microcontroller Hardware Platform for Academic Environment:The UMP-EVT. In: Malaysian Technical Universities Conference on Engineering and Techology (MUCET 2010) , 28 June 2010 , Melaka. pp. 489-492..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) MCS51® Evaluation Tool with IDE Approach for Learning Environment - The UMP-MET. In: International Conference on Embedded System & Microprocessor (ICESM 2010) , 4 December 2010 , Manila, Philippines. pp. 21-24..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) Multi-Microcontroller Evaluation Tool for Education in Embedded Control Technology: The UMP-EVT. In: International Conference on Embedded System & Microprocessor (ICESM 2010) , 4 December 2010 , Manila, Philippines. pp. 11-14..

Selvakumar, Raja Saravana Kumar and Kamarul Hawari, Ghazali and Nik Mohd Kamil, Nik Yusof (2010) A New Development of Modular-Approach Multi-Microcontroller Based Educational Training System. In: National Postgraduate Seminar (NaPaS 2010) , 6 July 2010 , Shah Alam Selangor. pp. 18-24..

Seydametova, Emine (2010) Morphological Characterization of Soil Penicillium sp. Strains - Potential Producers of Statin. In: Biotechnology Symposium IV , 01 - 03 Dec. 2010 , Universiti Malaysia Sabah, Sabah, Malaysia. . (Unpublished)

Sharma, Korada Viswanatha (2010) Application Of Design Patterns And Space Concepts In The Development Of Heat Pipes. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Siau-Chuin, Liew and Jasni, Mohamad Zain (2010) Experiment of Tamper Detection and Recovery Watermarking in PACS. In: Second International Conference on Computer Research and Development 2010 , 7-10 May 2010 , Kuala Lumpur, Malaysia. pp. 387-390..

Siti Aishah, Ghani and Azian, Abd Rahman and Norsaini, Abd Samad and Mohd Fauzi, Mohamed and Muhamad Firdaus, Jaini and Shamsor Masra, Othman (2010) Bookdrop yang gagal proses pemulangan buku ringan. In: Konvensyen ICC Wilayah Pantai Timur , 26-27 July, 2010 , Renaissance Hotel, Kota Bharu. . (Unpublished)

Tan, Yew Huei and Huam, Hon Tat and Ahmad, Sharifuddin and Amran, Rasli and Mohamad Rozi, Hassan and Nasser, Noor (2010) The Effects of Brand Equity towards Customer Loyalty of a Well-known Sportswear Brand in Malaysia. In: International Economic and Business Management Conference (IEBMC 2010) , 16 November 2010 , Universiti Tenaga Nasional. pp. 1-13..

Tuan Sidek, Tuan Muda and Abdullah, Mat Sapri and Ahmad Fazullah, Ahmad Zainal Abidin and Ahmad, Ibrahim (2010) Kesan laman web dan blog Islam terhadap kefahaman Fekah: Tinjauan terhadap pelajar dan kakitangan Universiti Malaysia Pahang. In: Regional Conference on Knowledge Integration in ICT , 1-2 June 2010 , Putrajaya. pp. 1-11.. (Unpublished)

Wan Ismail, Ibrahim (2010) Time-To-Thunder Method Of Lightning Distance Determination. In: 2010 IEEE International Conference On Power And Energy (Pecon) , 29 Nov - 1 Dis. 2010 , Sunway Resort Hotel & Spa, Kuala Lumpur. . (Submitted)

Wi, Lihua and Liew, Kong Yong and Salimah, Shafii (2010) Preparation Of Palladium Nanoparticles Stabilized By Cyclodextrins In Aqueous Solution And Their Activity For Hydrogenation Of Palm Oil. In: International Conference On The Advancement Of Material And Nanotechnology Ii , 29 November – 1 December 2010 , The Prince Hotel And Residence, Kuala Lumpur. .

Yusof, Hashim and Jinan Basheer, Ahmed and Ismail K., Al-Faluji (2010) Negative Thermal Expansion in Ferromagnetic Fe-Ni Invar Alloys. In: 3rd International Conference on Solid State Science & Technology (ICSSST 2010) , 1-3 December 2010 , Kuching, Sarawak, Malaysia. .

Z. M., Hafizi and C. K. E., Nizwan and D. M., Firdaus (2010) A Study Of Acoustic Emission Intensity Effect During Fuel Injector Fault. In: National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) , 26-27 May 2010 , FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia. pp. 495-501.. ISBN 978-967-5080-9501

Z. M., Hafizi and Che Ku Eddy Nizwan, Che Ku Husin (2010) High Frequency Acoustic Signal Analysis for Internal Surface Pipe Roughness Classification. In: The International Conference on Experimental Mechanics (ICEM 2010) , 29 Nov. – 01 Dec. 2010 , Kuala Lumpur, Malaysia. .

Zamri, Mohamed (2010) Designing Driver Space for Large Car. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010) , 3-4 December 2010 , UMP Pekan, Pahang. .

Zamri, Mohamed and Mohd Yusof, Taib and Mohamed Reza Zalani, Mohamed Suffian (2010) Assessment Method for Course Outcome and Program Outcome In Outcome Based Education (OBE). In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2010) , 28-29 June 2010 , Melaka, Malaysia. .

Reports

Abd Rahman, Safie (2010) UMP annual report 2010. Other. Penerbit Universiti Malaysia Pahang, Kuantan.

Newspaper

Asrol, Awang (2010) 6,000 pekerja sertai program latihan. Berita Harian .

Asrol, Awang (2010) Anak derita ayah hilang diri. Berita Harian .

Hafiz, Abbas (2010) Jadi pelajar demi anak. Kosmo .

Khairina, Yasin (2010) Tiga produk UMP menang anugerah di London. Berita Harian .

Khoo, Simon (2010) New dribbling talents. The Star .

Mimi Rabita, Abdul Wahit (2010) 500 pelajar KMPh sertai program bersama UMP. Berita Harian .

Mimi Rabita, Abdul Wahit (2010) Pertandingan reka cipta UMP jana idea baru. Berita Harian .

Mimi Rabita, Abdul Wahit (2010) Tujuh pelajar UMP tubuh syarikat animasi, permainan video. Berita Harian .

Mimi Rabita, Abdul Wahit (2010) UMP raikan bulan merdeka berkonsepkan semarak Ramadan. Berita Harian .

Mohd Rafi, Mamat (2010) Konvoi konvo UMP: pelajar, ahli kelab masuk Felda pererat masyarakat dengan universiti. Harian Metro .

Mohd Rafi, Mamat (2010) Penuntut KMPh dapat pendedahan di UMP. Berita Harian .

Mohd Saiful, Mohd Sahak (2010) Mendalami ilmu kewartawanan. Utusan Malaysia .

Mohd Saiful, Mohd Sahak (2010) Symbion dedah kesedaran bioteknologi. Utusan Malaysia .

Rohani, Ibrahim (2010) Kerjasama akademik dan industri untuk modal insan. Utusan Malaysia .

Rosli, Abdul Jalil (2010) Pupuk semangat sukarelawan. Berita Harian .

Roslina, Mohamad (2010) Royal presence at universiti's Hari Raya open house. The Star .

Sharifah Hazirah , Al-Jeffrey (2010) Membudayakan tabiat membaca. Sinar Harian .

Siti Norizat, Shikh Abdul Jalil (2010) Beri impak besar naikkan imej universiti Alumni UMP aset intelektual. Utusan Malaysia .

Siti Norizat, Shikh Abdul Jalil (2010) UMP tubuh Sekretariat Rukun Negara. Utusan Malaysia .

UMP, . (2010) 4 pelajar UMP raih pingat emas. Metro .

UMP, . (2010) 42 staf UMP sertai bengkel kewartawanan. Utusan Malaysia .

UMP, . (2010) 500 pelajar kolej matrikulasi lawat UMP. Metro .

UMP, . (2010) 6,000 pelajar UMP pilih wakil Khamis ini. Harian Metro .

UMP, . (2010) AHli MPP jadi medium jaga kepentingan pelajar. Berita Harian .

UMP, . (2010) Bidang penulisan penting untuk capai visi universiti. Utusan Malaysia .

UMP, . (2010) Cara tadbir UMP mesti kreatif - Dr. Daing. Utusan Malaysia .

UMP, . (2010) GACC selaras pengajian. Metro .

UMP, . (2010) Mahasiswa perlu berani, lakukan sesuatu di luar kelaziman. Utusan Malaysia .

UMP, . (2010) Naib Canselor UMP profesor tamu di China. Harian Metro .

UMP, . (2010) Naib Canselor UMP terima anugerah AGBA. Utusan Malaysia .

UMP, . (2010) Pelajar juara catur menang RM50,000. Kosmo .

UMP, . (2010) Pengeluar gaharu jalin kerjasama. Berita Harian .

UMP, . (2010) Penuhi cuti dengan program ilmu. Sinar Harian .

UMP, . (2010) Penuntut UMP bakal terima wang zakat. Sinar Harian .

UMP, . (2010) Penyelidik UMP menang pingat di Jerman. Utusan Malaysia .

UMP, . (2010) Persembahan budaya UMP seri acara Sabtu ini. Harian Metro .

UMP, . (2010) Sapura Industrial, UMP jalin kerjasama. Berita Harian .

UMP, . (2010) Sisipan jadi saliran interaksi IPT, masyarakat. Berita Harian .

UMP, . (2010) Tingkatkan pengetahuan. Metro .

UMP, . (2010) UMP buka pusat akademik dan kerjaya Jerman. Berita Harian .

UMP, . (2010) UMP pergiat usaha memperkasa hubungan alumni. Utusan Malaysia .

UMP, . (2010) UMP perkenal semula sudut pidato. Sinar Harian .

UMP, . (2010) UMP tanam 20 batang pokok mangga. Utusan Malaysia .

UMP, . (2010) UMP tonjol keunikan kaum India. Sinar Harian .

UMP, . (2010) UMPH, CENFED rai warga universiti. Berita Harian .

UMP, LIB (2010) 1000 penonton meriahkan Malam Pesta Cahaya UMP. Utusan Malaysia .

UMP, LIB (2010) 16 terima Anugerah Nadi Negara. Utusan Malaysia .

UMP, LIB (2010) 2 pasangan suami isteri pilu anak tak sempat terima ijazah. Utusan Malaysia .

UMP, LIB (2010) 47 dapat kelengkapan sekolah. Harian Metro .

UMP, LIB (2010) 90 peratus siswazah UMP diterima bekerja. Utusan Malaysia .

UMP, LIB (2010) Anak muda tak sanggup lakukan penyembelihan? Utusan Malaysia .

UMP, LIB (2010) Anak tidak sempat genggam ijazah. Sinar Harian .

UMP, LIB (2010) Ibu jadi pendorong. Berita Harian .

UMP, LIB (2010) In the spirit of Deepavali: Varsity's celebration receives good support. The Star .

UMP, LIB (2010) Kelab motor UMP adakan konvoi Expoconvo. Utusan Malaysia .

UMP, LIB (2010) Kursus sembelihan pupuk nilai murni. Sinar Harian .

UMP, LIB (2010) Laman web bola keranjang (UMP). Sinar Harian .

UMP, LIB (2010) MB Pahang dianugerahkan ijazah kehormat UMP. Harian Metro .

UMP, LIB (2010) PERKASA UMP muncul juara pertandingan debat. Berita Harian .

UMP, LIB (2010) Penglibatan aktiviti sukarelawan mahasiswa kurang. Utusan Malaysia .

UMP, LIB (2010) Pengorbanan ibu tiga tahun temankan anak di universiti. Utusan Malaysia .

UMP, LIB (2010) Penyelidikan negara diiktiraf dunia. Sinar Harian .

UMP, LIB (2010) PhD pada usia 54 tahun. Sinar Harian .

UMP, LIB (2010) Program Symbion tarik minat pelajar tentang bioteknologi. Utusan Malaysia .

UMP, LIB (2010) SK terima 400 buku ilmiah sumbangan UMP. Sinar Harian .

UMP, LIB (2010) SMV Tengku Ampuan Afzan johan reka cipta. Utusan Malaysia .

UMP, LIB (2010) Siti Noor Hidayah juara pidato. Berita Harian .

UMP, LIB (2010) UM, USM ungguli Karnival Bola Keranjang 3 On 3. Harian Metro .

UMP, LIB (2010) UMP anjur program Jom Membaca di Rumah Permata Camar. Utusan Malaysia .

UMP, LIB (2010) UMP bakal pusat sukan tumpuan bola keranjang. Harian Metro .

UMP, LIB (2010) UMP bantu pupuk budaya membaca. Harian Metro .

UMP, LIB (2010) UMP lancar portal alumni. Harian Metro .

UMP, LIB (2010) UMP pusat sukan. Sinar Harian .

UMP, LIB (2010) UMP sumbang buku kepada sekolah. Utusan Malaysia .

UMP, LIB (2010) UMP, UTM kerjasama anjur program kepimpinan. Sinar Harian .

UMP, LIB (2010) UMP, Universiti Sarajevo meterai memorandum. Harian Metro .

UMP, LIB (2010) Usia bukan penghalang capai cita-cita. Utusan Malaysia .

UMP, LIB (2010) Warga UMP hayati kemerdekaan. Sinar Harian .

Wan Yuslina , Wan Muda (2010) UMP, KMP jalin kerjasama. Utusan Malaysia .

Yahya, Zain (2010) Malam puisi riong di UMP. Berita Harian .

Zaitie, Satibi (2010) Pengunjung sukar lupa. Harian Metro .

Zaitie, Satibi (2010) Semangat jitu. Harian Metro .

Zulkhairil, Zainuddin (2010) UMP juara sepak takraw. Sinar Harian .

Research Book Profile

Ameedeen, Mohamed Ariff (2010) Sequence diagram synthesis theory for stitching together multiple sequence diagrams through formal semantics modelling. (Unpublished)

Research Report

Abd Jalil, Borham and Awang, Mohd Ghani and Zubir, Sharifah Intan Safina Syed (2010) Developing Islamic Banking and Financing System : SIPKe-i. , [Research Report: Research Report] (Unpublished)

Abduelrahman, Azhari Hamid Nour (2010) Chemical & biological studies on the constituent of indigenous and introduced accessions of basil (ocimum basiliccun) growing in Malaysia. , [Research Report: Research Report] (Unpublished)

Ahmad, Noraziah and Mohd Sidek, Roslina and Ramli, Muhammed Ramiza and Junaida, Sulaiman and Jamil, Norazaliza Mohd and Hamid, Roslina Abdul and Noor, Noorhuzaimi Karimah (2010) Development of read-one-write-all synchronization transaction daemon (row A-STD) in distributed system. , [Research Report: Research Report] (Unpublished)

Alias, J. and Mohamad Mazwan, Mahat and Akramin, M. R.M. (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis. , [Research Report: Research Report] (Unpublished)

Che Man, Rohaida and Abdul Munaim, Mimi Sakinah and Zularisam, A. W. and Yunus, Rosli Mohd and Hassan, Zulkafli Bin (2010) Encapsulation of natural dye by Cyclodextrin : effect of Cyclodextrin types and concentration. , [Research Report: Research Report] (Unpublished)

Duraisamy, Youventharan (2010) Preliminary design chart of cement column for deep soil mixing method in tropical peat. , [Research Report: Research Report] (Unpublished)

Ibrahim, Ainol Haryati and Zailin Shah, Yusoff and Nik Mohd Alwi, Nik Aloesnita and Kassim, Asiah and Ahmad Nasaruddin, Sulaiman (2010) Wiki as a collaborative writing tool in the academic report writing classroom. , [Research Report: Research Report] (Unpublished)

Mohd Radzuan, Noor Raha (2010) Oral presentation skills for engineering students : industry's criteria. , [Research Report: Research Report] (Unpublished)

Ramasamy, D. and Samykano, M. and Kadirgama, Kumaran and Lee, Giok Chui and Noor, M. M. and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method. , [Research Report: Research Report] (Unpublished)

Speech

Pejabat, Naib Canselor UMP (2010) Teks Ucapan Profesor Dato' Dr. Daing Nasir Ibrahim Majlis Amanat Tahunan Naib Canselor 2010. In: Membangun Universiti Bagi Keunggulan Lestari, 1 Februari 2010, Dewan Kompleks Sukan Universiti, UMP Kampus Gambang. (Unpublished)

Thesis

D., Ramasamy and Mahendran, Samykano and K., Kadirgama and Lee, Giok Chui and M. M., Noor and Mahdhir, Mohd Yusof (2010) Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method = membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS). Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Juliawati, Alias and Mohamad Mazwan, Mahat and Mohd Akramin, Mohd Romlay (2010) Developments of aneurysm rupture prediction method using fracture mechanics analysis = pembangunan kaedah jangkaan pemecahan aneurisma menggunakan analisis mekanik rekahan. Other thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Liyana, Mohamed Yusof (2010) Accessibility for wheelchair users in public parks : a comparison between Adelaide and Kuantan. Masters thesis, The University of Adelaide (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shaiful Azman, Abdul Rahim (2010) Screening and optimisation study on antioxidant extracts from selected lamiaceae plants. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nik Aloesnita, Nik Mohd Alwi (2010) Examining the language learning potential of a task-based approach to synchronous computer-mediated communication. PhD thesis, Victoria University of Wellington (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Faddly , Mohamad (2010) Performance of concrete by using pulverized fuel ash (PFA) as a cement replacement material. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noormazlinah, Ahmad (2010) Production of fructo-oligosaccharides from the enzymatic conversion of coconut sugar catalyzed by fructosyltransferase in a batch reactor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Norainon, Mohamed (2010) Modelling and switching simulation of gate turn-off thyristor using finite element method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhaiza, Ghazali (2010) Development of terrain height multipliers and roughness lengths for Seberang Perai reogion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norsyahida , Mohammad (2010) Producing hydrogen from seawater electrolysis. Masters thesis, RMIT University (Contributors, UNSPECIFIED: UNSPECIFIED).

Nugroho , Dewayanto (2010) Waste to valuable by product - utilization of carbonised decanter cake from palm oil milling plant as an effective adsorbent for heavy metal ions in aqueous solution. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurzahida, Mohd Zaid (2010) Visualization of intracellular ice crystal formation using x-ray micro-computed tomography /. Masters thesis, Faculty of Chemical and Natural Resource Engineering (Contributors, Thesis advisor: Mimi Sakinah, Abdul Munaim).

Rihab Hussein, Jawad (2010) Production of biosurfactant from locally isolated bacteria. Masters thesis, UNIVERSITI MALAYSIA PAHANG (Contributors, Thesis advisor: Hayder A., Abdul Bari).

Roshasliza, Samat (2010) The application of the rehabilitation module for academic achievement among technical college student's of Pahang Skills Development Center. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Md. Muhammad Nubli, Abdul Wahab).

Yap, Chui Yan (2010) Predictive effects of managerial need support, basic psychological need satisfaction, and role overload on work engagement. PhD thesis, UNIVERSITI KEBANGSAAN MALAYSIA (Contributors, UNSPECIFIED: UNSPECIFIED).

Zuraidah, Mohd Ali (2010) Development of pretreatment techniques for high productivity gaharu extraction. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Yunus, Rosli).

UMPSA News

Rosniza, Mohd Taha (2010) Gula daripada serbuk kayu. Berita Harian .

Undergraduates Project Papers

Ab Aziz, Nadira (2010) Effect of pH and ionic strength on membrane flux in the separation of escherichia coli by using cross-flow microfiltration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ab. Halim, Nurul Iffah (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using pineapple pith for biocomposite application. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Abd Faiz, Muhammad (2010) Effect of abrasive tools on surface finishing when grinding mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abd Rahman, Diyanti (2010) Biodiesel production via homogeneous lewis acid catalyzed transesterification. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Abdul Aziz, Safiee (2010) Design and manufacture simple portable astro receiver stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Hadi, Abd Majid (2010) Optical study of ethanol gasoline blends with or without heating. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Halim, Hadzir (2010) Development of automated storage and retrieval system (AS/RS) prototype. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Khaliq, Abdul Kadir (2010) Design and fabrication of umbrella swing stand. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Muiz, Roomai Nor (2010) Embedded based remote monitoring and controlling system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Abdul Rahim, Asas (2010) Optimization of electrical discharge machine on mild steel AISI 1020 by using grey relational analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdul Rahman, Othman (2010) Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Abdul Rahman, Mohd Sabri (2010) Spray simulation of hydrogen fuel for spark ignition engine using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Abdullah, Amira (2010) The effect of vacuum pressure on the flammability limits of hydrogen (H2) enriched liquefied petroleum gas (LPG) in a closed vessel. Faculty of Chemical & Natural Resources Engineering , University Malaysia Pahang.

Abdullah, Huzaifah (2010) The effect of nitrogen dilution and hydrogen enrichment on the explosive limits of liquefied petroleum gas (LPG). Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang.

Abdullah, Nor Anira (2010) Effect of ph and ionic strength on permeate flux during separation of lactobacillus plantarum by using hollow fiber crossflow microfiltration. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afifah, Hapidz (2010) Conservation of energy and economic analysis for production of 50000MT/Annum of titanium dioxide plant by using pinch analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Afiq, Mohamad Nor (2010) Optimization of cost effectiveness for slope stability. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Afiq Aiman, Mohamad Razak (2010) Design criteria of biofilter system as treatment for domestic wastewater. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Ahmad, Siti Solehah (2010) Effect of Temperature and Ph on Glucose Production Using Enzymatic Hydrolysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Adli, Jamaludin (2010) Comperative studies of reinforcement concrete beam design using BS 8110 and ACI 318. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Aizad, Jamil (2010) Design and fabricate mini biogas digester. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Akmal, Wahamid (2010) Development of nonlinear model for plug flow reactor process. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang.

Ahmad Asyraf, Ramli (2010) Theoretical analysis of solar water heating system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Azam Azizan, Azlan (2010) Fatigue crack growth analysis of stainless steel under mode 1. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Basyir, Sadan (2010) Corrosion and mechanical properties study of car steel sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Bazli, Bustary (2010) Fabrication and antimicrobial analysis of composite biodegradable film from pumpkin starch. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Ahmad Efendi, Mohamad (2010) Development of buckboost converter for DC motor speed control application. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Fadli, Zainal Abidin (2010) Analysis of rainfall event and bridge on Galing River. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Ahmad Fahmy, Jusoh (2010) Flow equations in commercial gas piping system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Fakhirin, Ali (2010) A sustainable drinking water supply from rainwater harvesting by submerge bio-membrane reactor. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Hazury, Hamid (2010) Design of a mechanism to mix biogas with air in compression internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Hisyam, Mohamad (2010) Design and development of portable pineapple peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Izamin, Ali (2010) Heat integration of fractionators for low temperature separation unit (LTSU) and product recovery unit (PRU). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ahmad Izzudin, Abdul Razak (2010) The effectiveness of wasra system on removing groundwater contaminants and its potential as water supply system at sub-urban and rural area. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Ahmad Izzudin, Ismail (2010) Study of shear for steel fibre reinforced concrete(SFRC) with ratio 0.15%, 0.25%, 0.35%, 0.45% and 0.55%. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ahmad Kamil, Miskam (2010) Effect of surface roughness on fatigue life. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Khusairi, Ayop (2010) Determination of heavy metal concentration in top surface and sub surface soil around Ulu Tualang closed landfill, Temerloh Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Makhzan, Ahmad Kamal (2010) Modification of existing water turbine system for application at local river. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Mustakim, Mohd Rusli (2010) Comparison of automatic and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Nazmi, Mohd Rose (2010) Performance of diamond tool in machining titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Ridzuan, Ibrahim (2010) Analysis of connecting rod fracture using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Safuan, Abdul Razak (2010) Luggage record system (LRS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ahmad Shafiq, Mohamad (2010) Design,construction and commissioning of microalgae photobioreactor. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ahmad Termizi, Mohd Azmi (2010) Convolution encoder for forward error correction. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zaki, Che Zainol Ariff (2010) Modal analysis of car disc brake. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zubaidi, Abdul Aziz @ Md Rani (2010) Development of microhydro generator system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ahmad Zul Hafiz, Ramli (2010) Effect of heat treatment on the corrosion resistance of aluminium alloys. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ahmad Zulfadzli, Ahmad Murad (2010) The study on heat distribution inside the combustion chamber of a gas fired pyrolysis system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ahmad Zulkhairi, Muhamad (2010) Oil palm biomass conversion to bio-oil through direct fired pyrolysis process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Aida Azwa, A. Halim (2010) Taguchi approach on surface integrity of titanium in turning operation using tin coated cutting tool. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aiman Hakim, Badarisman (2010) Modelling of high efficiency miniature aerocyclone. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Aimi Fadlini, Fauzi (2010) Water treatment using slow sand filter. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Aimi Jehan, Hamzah (2010) The potential of kaolinite as a landfill liner material. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Aimi Nadia, Azmi (2010) Fir filter for makhraj recognition system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Aimi Shakira, Yuseh (2010) Evaluation of filter design and harmonic analysis using PSCAD/EMTDC. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ainul Nadirah, Izaharuddin (2010) Scale up study on production of biodiesel from jatropha crude oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ainun Jariah, Sansuri (2010) Synthesis and swelling behavior of bentonite based superabsorbent polymer composities. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Aizat, Mohd Taib @ Taib (2010) The effectiveness of coconut coir blanket in controlling slope erosion. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Aizuddin, Abdul Malek (2010) A preparation of nitric acid from nitrogen dioxides using photocatalytic method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Al Nazirul, Haron (2010) Design and fabricate multipurpose trolley. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Albert, Roland (2010) Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Alexson, Abit (2010) Finite element modeling of cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Alfatihah, Abdullah (2010) Face recognition using neural network. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Amar Reza, Mohammad Firdaus (2010) Internal surface pipe roughness classification using high frequency acoustic evaluation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ambikapathi, A. Vishnushama (2010) Improvement of alum & PACL coagulants for the treatment of pulp and paper mill wastewater. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Amin Abidin, Buran (2010) Performance of coated and uncoated carbide tools while dry machining aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amir Hamzah, Azahar (2010) Performance evaluation of FKM central unit air condition system/chilled water system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amirul Juwaidy, Omar (2010) Digital modeling evaluation on tidal effect of the Galing River. Faculty of Civil Engineering & Earth Resources , UniversitI Malaysia Pahang .

Amirul Shazwan, Omar (2010) Design and manufacture the top head of a diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Amryana, Pohan (2010) Treatment of polluted water (river) by using activated carbon from coir pith. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Aneth Athea, Mat Som (2010) Design and fabricate smart laundry cart. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ani Syazana, Jasni (2010) Drowsiness detection for car assisted driver system using image processing analysis. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Ann, Lim Jo (2010) Formulation of natural drag-reducing agent from malabar spinach for aqueous liquid flowing in turbulent mode through pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Annafi, Mohd Khobori (2010) Mold design & surface analysis of casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Aravinda, Kottasamy (2010) Design and fabrication of laboratory scale micro-hydroturbine test rig. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Arumugam, Gayathri (2010) Separation of goat milk to whey protein by cross flow filtration using hollow fibre membrane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Arunan, Siwaraju (2010) Design and fabrication of small scale trainer aircraft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asmalina, Mohamad (2010) Full factorial and experimental investigation on surface integrity of stainless steel in wedm operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Asyran Zarizi, Abdullah (2010) LAN searching system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Attiyah, Ariffin (2010) Production of zeolites from oil palm ash. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Awang, Kamaruzaman (2010) Formaldehyde emission from wood based panels. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Azhari, Anuar (2010) Biotransformation of phenol using immobilized polyphenol oxidase from banana stem. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azila Azura, Juma'at (2010) Biodegradable electrospun fibers for drug delivery application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Azlan, Mohd Saini (2010) Monitoring tool wear process in turning machine using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azmeen Aida, Azizul Hamid (2010) A study of internal lighting comfortability at lecture room. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Aznizan, Shaari (2010) Optimization of glucose production from enzymatic hydrolysis of rice straw using response surface methodology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Azri, Abdullah (2010) CFD simulation of gas-liquid hydrodynamics in aerated stirred tank. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azri Amzari, Ramli (2010) Evaluation and optimization of heat extraction device. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azriq Fildza, Anuardi (2010) Design and fabricate multifunction baby stroller. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Ariff, Abdul Halim @ Abdullah (2010) The biopetrol synthesis from palmitic acid-heterogenous catalytic cracking with zeolite catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Azrul Azam, Nizarudin (2010) Experimental study of heat transfer coefficient of nanofluid flow through a plain tube. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Azrul Hafiz, Awang (2010) Letter recognition using backpropagation algorithm. Faculty of Computer Systems & Software Engineering, University Malaysia Pahang.

Azyyati, Johari (2010) Effect of nonsolvent additive on development of polyethersulfone (PES) membrane for 02/N2 separation. Faculty of Chemical and Natural Resources Engineering, Universtiti Malaysia Pahang.

Azza Nurain, Kairallah (2010) The effect of vacuum pressure on the flammability limits of H2 enrichment in natural gas (NG). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Bahrun, Mohd Shakir (2010) Treatment of industrial detergent wastewater via membrane separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Baiyinah, A.Talip (2010) Effect of inoculum concentration on butanol and ethanol production by clostridium acetobutylicum. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Balachanter, Ramasamy (2010) Investigation on the strength of the recycled asphalt pavement as a base material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Basyir, Mansor (2010) Hydrological river modeling for Sungai Lembing Area Bukit Kenau using Infoworks RS. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Batumalai, Thilagawathi (2010) Investigation on the usage of allium cepa (onion) as natural corrosion inhibitor in industrial chill wastewater system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Cha, Kwan Hung (2010) Development of a tool to design AC harmonic filter for HVDC transmission system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chan, Yunn Chyuan (2010) Management front end for cache server. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Chandran, Surendren (2010) Performance of foamed concrete by using by product material : palm oil clinker crushed (POCC) as sand replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Charomie, Tat Wi (2010) Implementation of hybrid encryption method using caesar cipher algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Che Amir Rajhan, Che Jaffar (2010) Springback prediction of mild steel sheet on L-bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Che Rohazli, Che Mazlam (2010) Line tracking robot using vision systems. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Cheow, Yin San (2010) Bio-petrol synthesized from rubber seed oil extracted from rubber seeds through catalytic cracking using montmorillonite. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Chia, Chee Haw (2010) Smart sign detection robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chia, Khai Tee (2010) Performance of spent bleaching earth as cement replacement in concrete. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ching Liang, Cho (2010) Mechanical properties of steel in aqueous corrosion. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Chong, Jason Nao Chen (2010) Identification of machine parameters in induction motor drive. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Chong, Pei Shan (2010) Finite element prediction of the axial load test on the profiled composite panel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Choo, Ling Qian (2010) The effects of environmental factors on the corrosion rate of TGIC-free polyester coated mild steel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Chua, Poh Wee (2010) Online optical shop management system. Faculty Computer System & Software Engineering, Universiti Malaysia Pahang.

Chung, Jia Jiunn (2010) Finite element analysis of corrugated web beam with openings. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Dany Ak, Dominic Neng (2010) Cubic interpolated pseudo particle (CIP) - Lattice Boltzmann scheme for the simulation of lid-driven cavity flow. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Deirdre, James Damu (2010) The study of interchangeability of liquefied natural gas (LNG) with other fuels. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Dexter, Zick Donny (2010) Liquid-liquid equilibria for methanol-methyl oleate-water-oleic acid system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Dilaeleyana, Abu Bakar Sidik (2010) Comparison of microwave-assisted hydrodistillation with the conventional hydrodistillation method in extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Diyana, Ghazali (2010) A study of corrosion to the carbon steel in the present of carbon dioxide. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Eddy, Misrum (2010) Self healing concrete crack by using pulverized fuel ash (PFA) as cement replacement material. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Eh Chan, Sakila Sabriani (2010) The effect of waste wash water on concrete properties. Sabriani. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Einayah, Kamaruzaman (2010) Effect of temperature on butanol and ethanol production from palm oil mill effluents by clostidium acetobutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ellie Fazlin, Mohd Sarian (2010) Effect of substrate concentration and agitation rate on butanol production from POME by Clostridium beijerinckii. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia Pahang .

Emir Izwandy, Dzulkafli (2010) Effect of aging on machinability of 6061 aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Engku Izyan Munirah, Engku Afandi (2010) Performance analysis on the influent of front tyres movement to the steering wheel system for steady and ride road conditions. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Eramamnazruasyadi, Mat Rajab (2010) Optimal of mixed refrigerant composition for mrc-lng system. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Ezani, Zahari (2010) A new non regenerative gas absorbant catalyst for FCC unit. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ezrin Tasnim, Abdul Ghani (2010) Pineapple distribution classification using RGB and fuzzy. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Fadilah, Mohamed (2010) Synthesis of bacterial cellulose by Acetobacter Xylinum sp. using watermelon rind waste for biocomposite application. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Fairul Idzwan, Mohd Rosni (2010) Finite element analysis of lumbar spine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fara Farhana, Abdul Basek (2010) Design and development of orange peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Faradilla, Mod Yatim (2010) Solar ventilation fan. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Farhan, Ab Razak (2010) Cost reduction study of automotive part using DFA method headlamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farhana, Abdul Halim (2010) Design analysis of unbraced frame using ANSYS. Faculty Of Civil Engineering And Earth Resources , Universiti Mâlaysiä Pähang .

Faris Syafiq, Zakaria (2010) Design and fabricate of secured LCD remote control holder in UMP Pekan lecture room. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Farisah, Abdul Aziz (2010) Biodegradation behavior of bacterial cellulose fiber reinforces with starch/chitosan biocomposite. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Farizah, Hamid (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using sawdust as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Faseha, Jamali (2010) Simulation of biodiesel production through heterogeneously catalysed transesterification of vegetable oil by calcium ethoxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fatihah Hayati, Abdul Sani (2010) Qualitative and quantitative analysis of natural colorants from banana bracts. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fauziah Shaheen, Sheh Rahman (2010) Biodegradable biocomposite starch based films blended with chitosan and whey protein. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Fazliana, Fauzun (2010) Design and development of 1-seated urban car chassis using aluminium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Fazlina, Mansor (2010) Designing and evaluating of jig for holding cylindrical parts for mass production for drilling operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Firas, Fadzil (2010) Using arbitration as a method for disputes resolution in Malaysia’s construction industry. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Fitri Yanti, Sukirman (2010) Study of the effects of Limnocharis Flava (yellow velvetleaf) on wastewater quality from oil palm production. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Foo, Chee Yew (2010) Hybrid membranes for separate hydrogen sulfide(H2S) gas from refinery wastewater treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Foong, Jek (2010) Staff management and fingerprint login module of shop management system. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Fua, Wai Loon (2010) Fatigue life and crack growth analysis of keyhole specimen. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gaase, Poarasy (2010) Isolation of albumin protein from goat�s milk using anion exchange chromatography. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Gary Royston, George (2010) Temperature based DC motor speed control. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Geetha, Muniandy (2010) An investigation of microstructure and mechanical properties of malleable cast iron using metal casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Gindalan, Emma Olga Taimin (2010) Newton loop method in gas pipeline network. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Gobinath, Raman (2010) Design of a lift reduction device for passenger car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hafezatul Rasyidah, Othman (2010) Wind environment evaluation on major town of Malaysia. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Hairul Ishyam, Hussein (2010) Determination of heavy metal concentration in surface and sub surface soil around Ulu Tualang newly-closed Landfill, Temerloh, Pahang. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Haliza, Mohd Jeffery Ong (2010) Effect of recycled aggregate from concrete waste on concrete compressive strength. Faculty of Civil Engineering and Earth Resources, University Malaysia Pahang.

Hamizah, Jasmi (2010) Determination of direction factor, Md for MS1553:2002 wind loading for building structure. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Hanis Farzana, Mohd Sadek (2010) Comparison of microwave-assissted hydrodistillation with the conventional hydrodistillation method in the extraction of essential oil. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Hanisah, Hamid (2010) RFID based systematic student's attendance management system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Harith Iskandar, Mohd Din (2010) Wireless charger. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Harna, Elavarasu (2010) Arc flash analysis study in industry. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hasbullah, Mat Isa (2010) Productivity improvement via simulation method (Manufacturing industry). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hashim, Ahmad (2010) Soil CBR improvement by fly ash with relation to pavement thickness, case study in Lepar Hilir, Kuantan. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Haslan, Mohd Yong (2010) Monitoring catastrophic failure event in milling process using acoustic emission. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hasrul Reeza, Mustaffa (2010) Facial motion recognition using camera application for movement of mouse (I-sight mouse). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Hau, Ong Boon (2010) Thermodynamic analysis of absorption refrigeration system (ARS). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Hazman, Abd Mulok (2010) Whey protein fractionation based on sp-sepharose cation exchange chromatography. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Heng, Yee Wien (2010) Impact of Co2 laser cutting parameters on the quality of cut on PMMA sheet. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hilmi, Mohd Zahidi (2010) Tyre pressure monitoring system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Hoo, Seng Tatt (2010) Demulsification of water-in-crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

How, Sheng Boon (2010) Productivity improvement using industrial engineering tools. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Huong, Nice Quan (2010) Drowsiness detection for car assisted driver system using image processing analysis-interfacing with hardware. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Hwa, Ooi Kuan (2010) Study of cod reduction by anaerobic digestion using mixed culture from industrial waste. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Idham Ariff, Mat Ali (2010) Design and analysis solar car chassis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Intan Diana, Yusof (2010) Degradation of dye wastewater using aerobic membrane bioreactor. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Intan Safinaz, Ismail (2010) A comparative study on anaerobic treatment between ponding system and digester tank system for palm oil mill effluent (POME) treatment. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Irman Agoes, Mohd Simin (2010) PSM & PTA evaluation system using PDA (PPESUP). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Ismail, Ab.llah (2010) Performance of coated carbide cutting tool while machining aluminium alloy and mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzah Suhaila, Abu Bakar (2010) Extraction of papain enzyme from papaya leaves using hot water extraction with ultrasonic – assisted pretreatment. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Izzat, Mohamad Adnan (2010) Algorithm development for optimization of a refrigeration system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Izzul Izwan, Ismail (2010) Modal analysis of engine piston rod for small engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jashiratulain, Ahmad Jailani (2010) Determination of cadmium (Cd) and chromium (Cr) concentration at surface and sub surface soil around newly-closed landfill in Ulu Tualang, Temerloh. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Jeprol, Magansal (2010) Counting available parking space using image processing. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Johari, Bar Azwar (2010) Investigation of circular based micropump diffuser. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Jolhi, Brahim (2010) Design and fabrication of concentrated solar thermal (CST) system for solar cooker application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Julius, Raymondee Junior (2010) The effect of suppression agents towards liquefied petroleum gas(LPG)& natural gas(NG)explosion limit. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Juzailah, Mohd Kheri@ Mohd Khairi (2010) Cisco router configuration using GUI concept. FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING, Universiti Malaysia Pahang.

Kamarah, Santini Raj (2010) Effect of natural filler on the characterization of natural rubber. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kamarul Ariffin, Mohd Mahpal (2010) Comparison of SLAB design between BS 8110 and Eurocode 2 by using microsoft excel. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Kamarul Izhan, Soh (2010) Graft copolymerization of methyl methacrylate onto rice husk. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Kamarulnizal, Amrin (2010) Scale up study and comparison of three downstream processes of monoclonal antibody production using superpro designer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kartar Singh, Pearljeet Kaur (2010) Effect of substrate concentration in producing higher butanol compared to ethanol by using clostridium acetobutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Khairil Anwar, Abu Bakar (2010) Multifunction broom. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairil Izuan, Ahmad Tarmidzi (2010) An experimental study of carboxylic acid prepared by carbon dioxide (CO2). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Khairul Aizat, Abdul Rahim (2010) One-dimensional simulation of a 4-stroke SI engine employing novel cylinder head concept : intake and exhaust flow investigation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Anuar, Abdullah (2010) Potential natural gas pipeline at residential college unit (UMP). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khairul Azmi, Mohd Yusoff (2010) Active sway control of a gantry crane system using LQR controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Bariyah, Abd Rahim (2010) Online fingerprint recognition. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khairul Danial, Abd. Latif (2010) Investigation of abundant treated sea sand (ATSS) with different percentages in cement brick ratio 1:6. Faculty of Civil Engineering & Environmental , Universiti Malaysia Pahang .

Khairul Faezi, Mohamad Alias@Ayit (2010) A computational model for aneurysm growth. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairul Ridhwan, Zainudin (2010) Thermodynamic analysis of ground source heat pump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairulanwar, Abd Rani (2010) Design and development of gearing system for car simulator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Khairun Nor Aimi, Ghazali (2010) Palm oil classification using RGB and fuzzy. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Khalizatul Radhiah, Kasim (2010) Heat treatment of carbohydrates to produce caramel color. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Khaw, Yong Hui (2010) Performance of lightweight foamed concrete using laterite as sand replacement. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Khok, Jess Lyn (2010) Embedded PC based wireless communication using XTEA. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Kioh, Shin Fang (2010) Protein denaturation in pilot scale spray dryer. FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING, Universiti Malaysia Pahang.

Kishore, Kannan (2010) Preparation of synthetic polymer from plastic waste using sulphur dioxide. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Kor, Yue Kim (2010) Investigating the effect of solid powder particle type on the turbulent multiphase flow in pipelines. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Krishnamurtthu, Sivathiban (2010) Voice to text system for disabled (V2TS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Kwan, Shong Hann (2010) Implementing cryptography in database. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Lai, Si Ying (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software : swimming google. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lai, Weng Hong (2010) An effective design of sun tracking system to increase the performance of solar cells. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lau, Yih Bing (2010) Effect of foamed concrete with egg albumen. Faculty of Civil and Environmental Engineering , Universiti Malaysia Pahang .

Lau, Zhen Chyen (2010) Experimental laser-machining of silicon wafer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Law, Dah Lit (2010) Swine farm wastewater treatment at Kampung Selamat, Seberang Perai Utara,Penang using Phytogreen Plants via Eichhornia Crassipes SP,Pistia Stratiotes SP and Typha Latifolia SP. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Law, Kok Sin (2010) Edu_Vistec : a software for computer vision educational trainer using MATLAB. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lawrence, Blasius (2010) Performance analysis on percentage of wheel slip for a passenger car using GPS and wheel speed sensor. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Chooi Ying (2010) Mechanical properties of concrete with 5 and 10 percent palm oil boiler stone (POBS) as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Lee, Jin An (2010) Compressive strength of high strength concrete using British standard, euro code and non-destructive test approaches. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Jun Hwa (2010) Case file tracking system for Badrul Lee & Associates. Faculty Computer System and Software Engineering, Universiti Malaysia Pahang.

Lee, Kun Guan (2010) Performance of foamed concrete using laterite as sand replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Lee, Poh Seng (2010) Determination of certain thermo-physical properties of nanofluids. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Ka Hung (2010) Effect of chip formation on tool wear in machining of titanium. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lee, Kong Haur (2010) Remoted balbot. Faculty of Electrical & Electronics Engineering, Universiti Malaysia Pahang.

Lee, Ming Jie (2010) PID implementation of UMP mini automation plant part 1- heating tank. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lee, Wai Loon (2010) Effect of electrical discharge machining process parameter on surface topograhy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Leong, Choon Wei (2010) Inoculums development for the production of monoclonal antibody against congenital adrenal hyperplasia(cah). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Letchmanan, Kumaran (2010) Formulation new flow improver in aqueous using natural mucilage extracted from aloe vera. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Liang, Kai Feng (2010) Case study of power system state estimation by using artificial neural network. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Liew, Annie Ann Nee (2010) Optimization of machining parameters of titanium alloy in electric discharge machining based on artificial neural network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lim, Chin Huey (2010) Roadsign detection and recognition (RSDR). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang .

Lim, Li Qeat (2010) Comparative study of an open lagoon with high efficient methane free treatment plant and CDM project in palm oil mill effluent. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Lim, Min Siang (2010) Solar water level controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lim, See Chaw (2010) Finite element analysis of axially loaded pierced profiled composite panel. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Lim, Zi Chao (2010) Dual axis solar tracker study. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Lina Chong Ann, Yi (2010) Strength as concrete with spent bleaching earth as cement replacement. Faculty of Civil Engineering and Earth Resources, University Malaysia Pahang.

Ling, Jacky Kuo Bao (2010) Water quality study and its relationship with high tide and low tide at Kuantan river. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Liow, Raymond Sang Loong (2010) Performance of construction company listed in Kuala Lumpur Stock Exchange. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Liyana, Amer Shah (2010) Production of biodiesel from jatropha c. oil using koh and lipase candida r. in an airlift reactor. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Loh, Simon Hock Hua (2010) Feasible laser parameter in fabrication of MEMS structure on PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Lyna Liyana, Johar (2010) The effect of vacuum pressure on the flammability limits of natural gas (NG). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

MUTUN, JESSICO (2010) Effects of coagulation medium on asymmetric polyethersulfone membrane for carbon dioxide and methane separation. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Maa Ajmalaisyatu Illani, Mohd Nawi (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of lemon grass essential oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maaruf, Muhamad (2010) Design and development of transmission for two-seated urban car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mah, Wen Sian (2010) Cashier and stock management module of shop management system. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Mahendran, Moorthy (2010) Performance of solar air-conditioning system using heat pipe evacuated tube collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mardhiana, Ismail (2010) Development of asymmetric polyethersulfone (PES) membrane for O/N Separation by using difference technique of membrane formation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mariati, Sabah (2010) Vision checking system for labelling inspection. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Maruthaiah, Manikavasagar (2010) Meeting management system (MMS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Maryam, Ismail (2010) Modelling of batch biopolymer fermentation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Marziana, Mohamad (2010) Production of sustainable fuel from food wastewater. Universiti Malaysia Pahang, Faculty of Civil Engineering & Earth Resources.

Marziatulhikmah, Maslan (2010) Assessment of building structure opening for dwelling. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Marzida, Abdul Manaf (2010) Relationship between roadside features and road traffic accidents along KM 3 - KM 27 of Jalan Kuantan-Gambang. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Masita, Md Isa (2010) The extraction of papain enzymes from papaya leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Maskhairiah, Ismail (2010) Comparison the nutrients in soybean products between primary analysis and NIR analysis. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Maslinda, Daud (2010) The logistic management of construction sites. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mastura, Awang (2010) Attendance system using Mykad and mobile application. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mazia, Awang (2010) Optimization of biopolymer production in shake flask using oil palm trunk sap medium. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mazlan, Sadri (2010) Degradation of methyl orange using ultrasonic irradiation: enhanced with adsorption using newspaper. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Megat Ahmad Faiz, Abdul Aziz (2010) The extraction of fish oil from eel by using microwave extractor. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Abiddullah, Mohd Lasim (2010) Finite element based fatigue crack growth of cracked plates under axial loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Afis, Adnan (2010) Recovery and separation of cellulose from sawdust wood hydrolysates using membrane creator: effect of transmembrane pressure (TMP) and cross flow velocity (CFV). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Azamudin, Ishak (2010) Effects of temperature on vapor liquid equilibrium of MTBE-methanol mixtures. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Azlan Syah, Dzulkafli (2010) The effect of oil palm trunk fiber on characterization of natural rubber. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Faiz, Mohd Ali (2010) Virtual guard. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Fikhri, Burhanuddin (2010) Study of cod removal by anaerobic digestion using mixed culture from sewage. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Fikhri, Nor Azman (2010) Development of nonlinear model for pH system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Ikwan, Zakaria (2010) Development of nonlinear model for continuous stirred tank reactor (CSTR). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Ilme, Ahmad Bahri (2010) Design and fabricate a movable multifunction table. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Naquib Fitri, Mohd Nadzri (2010) Biopetrol syhthesized from stearic acid - heterogeneous catalytic cracking by zeolite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Nazrin Kooy, Mohd Daniel Kooy (2010) Experimental and numerical analysis of deep drawing process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Noradli, Hashim (2010) Treatment of MTBE in wastewater by air stripping and carbon adsorption. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Redzuan, Bujang (2010) An experimental study of conversion of carbon dioxide into hydrocarbon fuel by using photocatalytic method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohamad Saiful, Izwan Busu (2010) Wear of coated carbide insert in machining of mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Saufi, Ayob (2010) Design of automatic control system to control the flow of biogas fuel into internal combustion system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sazman, Sazali (2010) Fuel-saving plate-electrode base device on gasoline fuel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shaffawi, Zainon (2010) Effect of cylic stress range on crack growth of aluminium alloy under axial loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Shafiq, Alias (2010) Design of small heat exchanger (double pipe type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sharif, Abu Bakar (2010) Keyboard controller VGA controller online. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohamad Suffi, Kamari (2010) Surface integrity of mild steel in wire electrical discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Sufian, Khalid (2010) Study of high speed gas turbine in industry by fuel ratio and turbine speed. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohamad Yazid, Mohamad Yassin (2010) Designing and manufacture solar turbines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohamad Zahari, Hamdan (2010) Performance investigation of a small four stroke carburatted SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Amin, Mohamed (2010) Intake and exhaust ports flow investigation of 4-stroke SI engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Azlan, Abdul Aziz (2010) Comparison manual and CVT transmission for a car under 1 liter engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Fairuz, Mohammad Naffekyudin (2010) Preparation & characterization of co/zn catalyst, SBA-15 supported for fisher tropsch synthesis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohammad Muzahir, Ahmad (2010) Evaluation of fibers in used in fishing lines. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Safuan, Sheafi (2010) Application of microcontroller to control pneumatic actuator. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohammad Solhi, Mohammed (2010) The analysis of factors contributed to delay and method to analyze the delay in construction project. Faculty Of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohammad Zulhilmi, Jamal (2010) Accelerate the reduction of palm oil mill effluent critical parameters with biological treatment. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd 'Afif, Abd Aziz (2010) Optimization of molding parameter effect to warpage and shrinkage of laboratory goggle based on plastic flow simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd 'Azim, Ab. Halim (2010) Surface integrity of titanium when machining with various cutting parameter. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ab Hakim, Ibrahim (2010) Advanced computer modelling technique for finite element analysis of truss structure. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Mohd Aiman, Mohd Ali (2010) The effect of different quantity of filtering materials to the performance of biofilter system for wastewater treatment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Mohd Aizat, Baharin (2010) Solar bicycle. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Aizuddin, Ab Razak (2010) Modification of coir fiber as polymer reinforcement. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Aizuddin, Hashim (2010) Development & characterization of sulfonated polyethersulfone membrane for proton exchange membrane fuel cell application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Aizuddin, Mat Alwi (2010) Optimization of surface roughness in milling by using response surface method (RSM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Akmal, Rohani (2010) A stator resistance estimation of induction motor using fuzzy logic. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Amin, Adrah (2010) Simultaneous removal of copper and lead from an aqueous solution using low-cost adsorbents. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Amir, Fikri Awang (2010) DC motor speed controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Amir Firdaus, Salleh (2010) Optimization of electrical discharge machine parameter on mild steel by using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Amiruddin Fadzli, Mohamad Zaini (2010) Development of polymeric drug delivery system using electrospun nanofibers for controlled release of multiple proteins. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Amirul Asyraf, Ahmad (2010) Production of biogas from poultry manure. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Amirul Hakim, Sidek (2010) Investigation on the use bottom ash as additive in optimizing cost of road pavement structure. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Mohd Amri, Lai Din (2010) Back to back converter control technique using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Ariff, Kamali (2010) Removal of Heavy Metal from Industrial Wastewater Using Ultrasonic Assisted By Tea Waste As Adsorbent. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Ashraf, Mohd Hussin (2010) Stabilization of subgrade by using fly ash related to road pavement thickness design at Jalan Jaya Gading. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Mohd Ashraf, Che Mat (2010) Recovery of silver from photographic waste: electrolysis behavior. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ashriq Muzzammil, Bahari (2010) Oil palm trunk (OPT) as an alternative cellulosic material for brown paper production. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Asrul, Abu Bakar (2010) Parameter optimization of a cylindrical grinding operation for the quality of surface finish. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Asyraf, Che Azmi (2010) Effect of heat treatment on the corrosion behavior of SS316 stainless steel in simulated body environment. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ayub, Adnan (2010) Design of biogas digester (Indian type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azahan, Mohd Yusuff (2010) Test rig development for high pressure spray. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azee, Zaidee Ee (2010) Modeling and simulation of skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azim, Muhammad (2010) The potential of bottom ash as fine aggregate replacement in concrete. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Azmi, Amat Manis (2010) Implementation of a buck boost converter in motor controller for a solar car. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Azri, Ahmad (2010) Measure color stability of red cabbage using different solvents. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Azuan, Abu Shah (2010) Mould design and mechanical analysis of the casted material. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Azuwan, Efendy Mail (2010) Online VLSM IP calculator. Faculty of Computer Systems & Software Engineering, University Malaysia Pahang.

Mohd Azzarudin, Zailani (2010) Development and characterization of sulfonated polyethersulfone membrane for proton exchange membrane fuel cell application. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Azzizul, Chamingan (2010) Corrosion inhibition of 6061 aluminium alloy in acidic media by honey. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Daim, Mohd Diah (2010) Application of AI technique for optimal location of TCSC device. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Dzohairy, Mohammad Mohsan (2010) Front and rear suspension design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Eriezhuan Effendie Shahrul, Rusli (2010) Performance of concrete by using palm oil fuel ash (POFA) as a cement replacement material. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Mohd Ezuwanizam, Masral (2010) Optimization of tool life in miling. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fadzil, Mat Isa (2010) Development of 2-axis solar panel for soil moisture detector at 4 seasons countries. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Fadzli, Yaaccob (2010) Effects of process parameters on recovery of base oil from spent lubricants using solvent extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Fahmi, Md Yusuf (2010) Performance of uncoated cutting tools when machining mild steel and aluminium alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fairuz, Mohd Jais (2010) Energy conservation & economic analysis for production of 50 000 mt/annum isobutylene plant using pinch analysis. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faisal, Ahmad Shafawi (2010) Effect of carbon black loading on the mechanical properties of rubber vulcanizates. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Faizal, Aziz (2010) Optimization of tool life using in milling using radial basis function network. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fakaruddin, Abdul Rahman (2010) Design formulation of freshwater fish feed from palm kernel cake (PKC). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Fakhrul, Anwar Alias (2010) Research study on inter-vehicle communication implementation in Malaysia. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Farhan Izzaudden, Abu Taib (2010) Time-dependent deformation of foamed concrete with different density. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Mohd Farid, Zainudin (2010) Vibration investigation of passenger car rear suspension system under various road condition and driving maneuever. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Faris, Mohd Yunus (2010) Optimization of medium formulation on production of recombinant chitinase in escherichia coli. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fauzi, Muhammad (2010) Comprehensive analysis of a light weight lift system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Fazry, Mahpar (2010) Wind generator. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Che Ismail (2010) Enhancement of carbon dioxcide (CO2) removal process in liquefied natural gas (LNG) production system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Mohd Yasin (2010) Line follower robot with solar application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Sudeerman (2010) Degradation of nickel from electroplating wastewater by using ultrasonic assisted extraction in addition of HCL. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Firdaus, Ahmad Sani (2010) Effect of soil resistivity in Pekan campus to the corrosion behavior of steel pipe system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Hashim (2010) Effects of variables on bipolymer production in 20l batch stirred tank fermentations. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Musa (2010) Building energy analysis using cooling load factor/cooling load temperature different (CLF/CLTD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Firdaus, Sudeerman (2010) Degradation of nickle from electroplating wastewater by using ultrasonic assisted extraction in addition of HCL. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fouzzi, Mohd Jabar (2010) Characterization and antimicrobial analysis of rice starch-chitosan blend biodegradable film with addition of cinnamon essential oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Fuad, Che Nordin (2010) Heat integration analysis of gas to liquid (GTL) process. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hafeez, Alias (2010) Theoretical analysis of absorption chiller system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafifi, Sabri (2010) Feasibility study of solar powered bicycle race. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hafis, Othman (2010) A study on problems of bumiputera contractor in construction industry. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Hafiz, Razilah (2010) Fabrication of modal analysis test rig for clamped-clamped boundry condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizi, Nawi (2010) Cost reduction study of automotive part using DFA method : rear lamp. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Mohd Ally Hussain (2010) The development of solar power boat engine. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hafizuddin, Shahrin (2010) The effect of char particle size on the efficiency of solid-vapor separation in a fast pyrolysis cyclone system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hafizul, Md Jais (2010) Effect of carbon dioxide (CO2) suppression on explosive limits of methane. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hafizul, Md Jais (2010) Effect of carbon dioxide (CO2) suppression on explosive limits of methane. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hanaffi, Yaa'kob (2010) Power compensation by distributed generation. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Mohd Said (2010) Removal of heavy metal from industrial wastewater by precipitation,coagulation and flocculation processes. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hanif, Ab Hamid (2010) Energy loss through the steam trap in a steam system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hasnul Shahril, Harun (2010) Billboard multilingual online system (BMOS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Mohd Hazizul, Hamzah (2010) Mechanical properties of styrene butadiene rubber with oil palm trunk fiber as filler. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Hazmie, Hamdan (2010) Exhaust emission of waste plastic disposal fuel on single cylinder YANMAR diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hazwan, Mohamad Shayuti (2010) Removal of phenol from aqueous solution by dried water hyacinth(Eichhornia Crassipes). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Helmi, Abd Jalil (2010) The experimental study of effect of grinding process on thermal and surface roughness. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Herzwan, Hamzah (2010) Exhaust emission of single cylinder diesel engine by using tire disposal fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hidayat, Hashim (2010) Biopetrol synthesized from palmitic acid-heterogeneous catalytic cracking by granular metal. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Hilmi, Jaafar (2010) Determination of heavy metal accumulation in ipomoea aquatica using wet destruction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Hishammudin, Donnie (2010) Design and development of a micro-EDM using micro-actuator tool feed control system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizam, Mohd Noor (2010) Effect of aluminium oxide and silicon carbide abrasive type on mild steel surface temperature. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Hizir Arafar, Tambun (2010) Springback prediction of mild steel sheet on V-bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Ikhwan, Mohd Rasid (2010) Production of biodiesel from jatropha oil using phase boundary catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Illahi, Mohd Ashri (2010) Study of safety management & professional to achive zero accidents in construction site. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Mohd Irwan Shah, Md Zain (2010) CFD study on the performance of oxygen lance of partial combustion unit at direct reduction plant. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Iskandar Zulkarnain, Talib (2010) Cost control in construction project of the site. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Mohd Izwan, Zaman (2010) Effect of Ipomoea aquatic/ Ipomoea reptans (kangkung) on wastewater quality from oil palm production. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Izzat, Samsudin (2010) Finite element modelling of abdominal aortic aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Izzat Fida'iy, Mohamed (2010) Production of virgin coconut oil (VCO) via water soluble and centrifugation methods. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Izzuddin, Abd Kadir (2010) Variable input constant output 3-phase AC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Khairil, Asri Kamaluddin (2010) Deceleration performance comparison for passenger car under on-road and off-road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Khazro'ie, Jaafar (2010) Cyber cafe management system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Mohd Madzuan, Abdullah (2010) Biodegradable behavior of coconut husk (coir) fiber reinforced starch bio-composite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Marhan, Asari (2010) A study on heat treatment of carburizing carbon steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Mazlan, Mohamed (2010) Isolation Of ß-Lactoglobulin and a-Lactalbumin from whey. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Muhyiddin, Ibrahim (2010) Optimization of cylindrical grinding parameter for the high product quality subject to roundness constraint. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nazmi, Mohd Nordin (2010) A study of tool wear prediction of cylindrical grinding wheel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nizam, Yusoff (2010) Waste minimization by recycling of construction waste. Faculty of Civil Engineering & Earth Resources , University Malaysia Pahang.

Mohd Nor Azlan, Zohari (2010) Experimental investigations of input shaping techniques for double pendulum type overhead crane (DPTOC) system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Nor Hisyam, Che Ab Aziz (2010) Fault detection for rotating machine using time frequency localization method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Norfarhan, Mohd Mustafa (2010) Design and simulation voltage dynamic restorer (DVR). Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Norhafizi, Rohaizat (2010) Optimization of molding parameter effect to warpage and shrinkage based on plastic flow simulation software: handphone casing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurazlan, Md Ghazali (2010) Kaizer effect in accoustic emission event from mechanical testing. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Nurul Akmal, Mohd Yusof (2010) Fracture toughness of railway track material using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Qhairul, Mohd Bokhari (2010) Study of particles transport along second and third generation of human airways using CFD. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Radzi, Abd Rashid (2010) Development of strain-based fatigue life calculation software for variable amplitude loading data. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Raheemmi, Mohd Yasin (2010) FSKKP thesis formatting application. Faculty Of Computer Science And Software Engineering, Universiti Malaysia Pahang.

Mohd Razman, Fadzil (2010) Comparative study on the extraction of β-carotene in the flesh and peel of papaya. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Ridzwan, Adnan (2010) Evaluation of nickel electroless plating on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rizal, Shafie (2010) One-dimensional simulation of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Rizuwan, Abd Wahab (2010) Designing of manifold system for LPG and industrial gas at FKKSA'S laboratory. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Rosazuwad, Mohamad@Muda (2010) The factors and effect of delay in government construction project (case study in Kuantan). Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Mohd Roslan, Maarof (2010) A removal of impurities using hybrid membrane from POME (palm oil mill effluent). Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Mohd Saiful Affendi, Zabidi (2010) The effect of oil palm trunk filler in expoxied natural rubber. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Saifulnizam, Awang Jaafar (2010) Reduction of Fe(ii) and Zn(ii) using fresh eichhornia crassipes. Faculty of Chemical Engineering & Natural Resources , Universiti Malaysia Pahang .

Mohd Salamuddin, Ab Salam @ Nawi (2010) Study on groundwater potential as alternative water supply in Kuantan and Bentong, Pahang. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Mohd Shahimie, Selamat (2010) Modelling of hydrodynamics in heterogeneous bubble column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Shahmal, Mohd Shahid (2010) Study of F1 car aerodynamics rear wing using computational fluid dynamic (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shahril, Mustafa@Sulaiman (2010) Optimization of sugar production from cassava residue using response surface methodology. Faculty of Chemical Engineering and Natural Resource, Universiti Malaysia Pahang.

Mohd Shahrir, Baharuddin (2010) Design formulation of goat feedstock from palm kernel cake (PKC). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Shahrul Khairy, Awang Kenal (2010) Smart mobile advertiser (SMA). Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Shaifol, Hamid (2010) Mechanical properties of poly (lactic acid) (PLA)/clay nanocomposite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Shamil, Shaari (2010) Design optimization of connecting rod for internal combustion engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Shukri, Alias (2010) A stator resistance estimation of induction motor using neural network. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Suhaimi, Mohd Noor (2010) Optimization of xylose production from rice straw using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Syafiq, Bachok (2010) Malaysia network transit route adviser system. Faculty Of Computer System & Software Engineering, Universiti Malaysia Pahang.

Mohd Syahmi Hafiz, Yasin (2010) Investigation of abundant treated sea sand with different percentages in concrete brick ratio 1:3. Faculty of Civil and Environmental Engineering , University Malaysia Pahang.

Mohd Syahmi Hafiz, Yasin (2010) Investigation of abundant treated sea sand with different percentages in concrete brick ratio 1:3. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Mohd Syakir, Abdul Rahman (2010) Effect of aluminum oxide and silicon carbide abrasive type on stainless steel ground surface integrity. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazlan, Mohd Hatta (2010) Machining surface roughness monitoring using acoustic emission method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazrul Shafiq, Saad (2010) Study of F1 car aerodynamics front wing using computational fluid dynamics (CFD). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Syazwan, Ramli (2010) Mechanical properties of concrete containing 5% and 10% of batik production waste. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Mohd Syazwan, Rosdi (2010) High efficiency step-down switched capacitor DC-DC converter. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mohd Taufidd, Tawang (2010) Numerical simulation of nanofluid forced convection heat transfer. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Taufiq, Awang @ Mohammed (2010) Development of regression equation for heat capacity and density of nanofluids properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Thorik Firdaus, Abdul Kadir (2010) Extraction of mangrove component for isolation of triterpenoid saponins via ultrasonic extraction method. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Usman, Mohd Junaidi (2010) Simulation of reactive distillation for biodiesel production from Jatropha Curcas seed oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mohd Waqiyuddin, Mohd Salleh (2010) The effect of carbon black loadings on tensile strength of rubber vulcanizates. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd Yusrizal, Mohd Yusoof (2010) Failure analysis of cerebral aneurysm. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zairie, Mohd Yusuff (2010) Industrial detergent wastewater treatment via fenton reagent. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Mohd Zambri, Abidin (2010) A study of acoustic emission in tensile test for metallic materials. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zia, Rosli (2010) Application of non destructive test for structure evaluation. Faculty of Civil & Environmental Engineering, Universit Malaysia Pahang.

Mohd Zuhairi, Md Zohir (2010) Springback prediction of mild steel sheet on 60° air bending. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulfadli, Kamarudin (2010) Reliability assesment of CNC turning center based on industrial statistics. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulhilmi, Md Yusof (2010) Failure of drive shaft using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulhilmi, Rifin (2010) Effect of lubrication condition on surface roughness in turning operation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd Zulkarnain, Zulkifli (2010) Corrosion inhibition of 6061 aluminium alloy in marine environments by milk. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Mohd. Khairi, Kamarudin (2010) The effect of adsorbent additive on clay based adsorbent to the removal of a single dye system. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd.Khairul Anuar, Samsudin (2010) Elucidation of the mechanism of enzymatic browning inhibition of the sap from oil palm trunk by chemical method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Mohd.Raflie, Maslih (2010) Selective recognition of bovine serum albumin (BSA) using molecular imprinting polymer technique. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhamad Afiq, Razali (2010) Effect of wheel grinder on the surface roughness when grinding aluminum alloy. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Aizat, Lengah (2010) Mechanical properties of concrete containing 15% and 20% of textile wastewater. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhamad Amzansani, Abd Wahab (2010) Design semi-active suspension using magneto-rheological damper. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Azhar, Azman (2010) Elimination of H2S from chicken manure by reaction with H2O2 & titrating with KMnO4. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhamad Faisal Ezuarie , Draman (2010) Fuzzy active vibration control for lathe machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Farid, A. Wahab (2010) Automatic detection temperature transmitter for calibration process using thermocouple. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhamad Farkhanif, Jamaluddin (2010) Boothyord Dewhurst and Hitachi AEM design for assembly : a comparative study. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Fikri Aziz, Mat Lah (2010) Study of pipe connector effect in piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Hafiz, Halim (2010) Biosorption of ferrum (II) from industrial wastewater by using water spinach (Ipomoea aquatica). Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Muhamad Haniffah, Ghafar (2010) Surface integrity of mild steel in die-sinking electrical discharge machine (EDM). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Harif, Ghani (2010) Reliability study of diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Iqmal, Muhamad Shah (2010) The effectiveness of geosynthetic to prevent slope erosion. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Muhamad Izwan, Sunawan (2010) Frame body structure for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Nazmi, Ahmad Nazari (2010) Fuzzy control on vehicle active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Rusydi, Ali (2010) Modeling and simulation of modified skyhook controller for active suspension system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhamad Shahir, Hasan (2010) Synthesis and swelling behavior of rice husk based superabsorbent polymer composite. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhamad Syukri, Shalihuddin (2010) Experemental study of hydrogen peroxide/methane combustion. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhamed Faliq Alif, Azhari (2010) The effectiveness of activated carbon from coconut shell as wastewater pollutant removal. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Muhammad, Iskandar (2010) The effectiveness of biofilter as a treatment for domestic wastewater. Faculty of Civil Engineering and Earth Resources , University Malaysia Pahang.

Muhammad, Nor Shakiman (2010) Simulation on airflow inside the nasal cavity with and without uncinate process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Izzat, Ramli (2010) Integrated home security system :Module on mobile application. Faculty of Computer Systems & Software Engineering , Universiti Malaysia Pahang .

Muhammad 'Izzat, Saidon (2010) Modification of lignin content in wood fiber by microwave heating and laccase treatment. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Adib, Mahmud (2010) Studies on bus services and passenger demand sustainability. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Muhammad Affiq Saufi, Nordin (2010) Optimization of extraction of antioxidants from lamiaceae sp. by boiling. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Afiq, Ariffin (2010) Design, construction and commisioning of bioreactor experimental rig to measure kLa of oxigen in newtonian fluid. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ali, Mohamed (2010) Fabrication of fuel saving device helical spring based on gasoline fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Alliff, Rahim (2010) One-dimensional simulation of two stroke hydrogen direct injection linear generator free-piston engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Arif, Ismail (2010) Potential natural gas pipe line at Universiti Malaysia Pahang laboratory and residential college unit for future development. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ashraf, Ali Zubir (2010) Visualization and analysis of the gasohol blends fuel spray pattern. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Bisharul Hafi, Ab Jalil (2010) Determination of heat transfer coefficient using experimental values of pressure drop of a single phase fluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Daniel, Selamat (2010) Extraction of green pigment from Pandanus Odorus. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Fadhil, Abdul Malek (2010) Bluetooth-triggered alarm security system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Faizul Izreen, Othman (2010) Understanding performance analysis for front wheel drive (FF) sedan vehicle under steady and ride road driving condition. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Fakhrullah, Mohd Nor (2010) Effect of ionic strength on whey protein separation in high performance tangential flow filtration. Faculty of Chemical and Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Fauzi, Muain (2010) Step motor speed controller. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Fikri Afiq, Abdul Mutalib (2010) The effect of microwave radiation on biodiesel production. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Firdaus, Haron (2010) Polypropylene reinforced with nanoclay cloisite® 30b: study on mechanical properties. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fitri, Ismail (2010) Pretreatment and separation of crude glycerol from glycerol residue using membrane reactor on effect of trans membrane pressure and cross flow velocity. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Fuad, Abdullah (2010) Recovery of β-Lagtoglobulin from whey using combination of size exclusion chromatography and ion exchange chromatography techniques. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hafeez, Hashim (2010) Investigation on the use of fly ash as additive in optimizing cost of road pavement structure, case study at Jalan Sultan Abu Bakar, Indera Mahkota, Kuantan. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhammad Hafizol , Husain (2010) Electronic controller system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Muhammad Haidar, Hussien (2010) Proposed the new design new air and deionized water piping system at FKKSA"s laboratory. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Hamizi, Msduki (2010) Simulation of common rail for hydrogen engine in automobile application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hanafi , Samihono (2010) Biodiesel production from Jatropha oil by using heterogeneous hydrophobic modified zirconia. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Hazim, Md Yusoff (2010) Availability and estimation of renewable energy for habitants living in remote places. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Hazwan, Hussin (2010) Flood estimation and river analysis of Sungai Isap. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Muhammad Hidayat, Musa (2010) Effect of zeolite concentration on development of polyethersulfone mixed matrix membranes (MMMs) for o2/n2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Ilham, Miskon (2010) Polypropylene clay nanocomposite :a study of mechanical properties. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Muhammad Izzat, Zakariah (2010) Contactless tachometer. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Izzuddin Hilmi, Zainal Abidin (2010) Computational fluid dynamics (CFD) analysis of a miniature wind turbine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Muizzuddin, Yusof (2010) Design and manufacture the inner shell of diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Rizuan, Musa (2010) Characteristic of palm oil methyl ester as alternative fuel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Safuan, Othman (2010) Design for assembly and application using Boothroyd Dewhurst method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Saufi, Abdul (2010) Experimental study on the noise reduction of hydraulic bench. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Shukri, Rabain (2010) Performance and emission characteristics of a diesel engine operating with biodiesel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syadda, Zainol (2010) Microwave assisted extraction of Ceriops Decandra SP. Leaves for hypoglycemic active compounds. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Syafiq, Ayob (2010) Upper body structure design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Syazwan, Mazlan (2010) Polypropylene organoclay nanocomposite. Faculty Of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhammad Taqiuddin, Mohamad Tabarani (2010) Design and analysis of a MRI miniature for children. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaharin, Zakaria (2010) Engine-propeller matching for fishing vessel at Kuala Pahang. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zaidi, Othman (2010) Effect of fermentation time on butanol and ethanol production from palm mill oil effluent by clostridium acetobutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Zaifulfazli, Zailani (2010) Development of measuring temperature change for water quality index in UMP lake, Pekan Campus. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Zaim, Hassan (2010) Flow characteristic of an elliptically shaped piezoactuated micropump. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zakwan, A. Razak (2010) Preparation and characterization of cobalt- zinc catalyst SBA 15 supported for fischer-tropsch synthesis: effect on zinc loading. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Muhammad Zulfadhli, Roslane (2010) Design and fabricate adjustable lab chair with back rest. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Mansor (2010) PC based small arm robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Muhammad Zulhilmi, Nordin (2010) The maintenance management of marine port facilities: case study Kuantan marine port. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Muhd Abd Mursyid, W. Mohd. Saberi (2010) Comparison between mehod of one-factor-at-a-time (OFAT) & design of experiment (DOE) in screening of immunoglobulin production stimulatesing factors. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Muhd Azzuhry, Zafri (2010) Self healing concrete by incorporating palm oil fuel ash (POFA) as cement replacement material. Faculty of Civil Engineering and Environment Resources, Universiti Malaysia Pahang.

Muhd Hasif, Juhari (2010) Development of speed controller for inverter FED induction motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mujahid, Jamaluddin (2010) Network monitor with packet siffer. FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING, Universiti Malaysia Pahang.

Munirah, Ab Rahman (2010) Major recommendation based on PMR result. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Musfafikri, Musa (2010) Optimization of amylase reaction through design of experiments(DOE). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Musliha, Mohamed (2010) Sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Mustaqim, Hazmi (2010) Automatic detection temperature transmitter for calibration process using RTD. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Mustaqim, Mohamad (2010) Effect of exhaust gas recirculation to performance and emissions of diesel engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Muzakkir, Shukri (2010) Analysis the effect of different type valve use at different pressure in piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabil Fahmi, Mohtar (2010) Modal analysis of pipe joint spiral wound gasket. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nabila Syazreen, Abdul Razak (2010) Determination of heavy metal accumulation in Ipomea aquatica using microwave digestion method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nabilah, Omor (2010) Characterization and antimicrobial analysis of cassava starch- chitosan blend biodegradable film with addition of black cumin oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadhirah, Ali (2010) Real time monitoring of surveillance CCTV. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nadia Faira , Mat Zali (2010) Force pattern in roofing system due to wind load. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nadiah, Zainuldin (2010) Selective separation of phenolic compound using molecular imprinting technique for solid phase extraction. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nadzirah, Md Lazim (2010) Kinetic study for biofilm manganese removal. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nadzirah, Yahya (2010) Transesterification of palm oil using tungstated zirconia. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Naeem, Zulkifle (2010) Modal analysis of notched beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nam, Zhen Kai (2010) Quality inspection system for canned pineapple. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nasobah, Ahmad (2010) Biodegradable poly (lactic acid)clay nanocomposite by melt intercalation :a study of mechanical properties. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nasuha, Jalil (2010) Cellulose recovery from sawdust : optimization of concentration, pretreatment time and temperature by using response surface methodology. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Navindran, Subramaniam (2010) Effect of exhaust temperature on the performance of a diesel engine with EGR. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nazirul Izzat, Ibrahim (2010) Development of single cylinder engine test rig for small engine dyno. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nedunjeliyan, Dinesh Varma (2010) Batch solvent extraction of caffeine from MCBC2. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nedunjeliyan, Dinesh Varma (2010) Batch solvent extraction of caffeine from MCBC2. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Neny Soffiana, Sofyan Effendy (2010) Municipal wastewater treatment using constructed wetland and limestone. Faculty of Civil and Earth Resources Engineering , Universiti Malaysia Pahang .

Nezille Izzie, Anak Lahu (2010) Effect of tyoe of solvents on asymmetric polyethersulfone PES) membrane for CO2/H4 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ng, Eng Chui (2010) Educational chatting system. Faculty of Computer System And Software Engineering, Universiti Malaysia Pahang.

Ng, Soo Nee @ Kerry Ng (2010) Level of awareness for wind flow assessment in urban development (Malaysia). Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Ng, Jit Huan (2010) Vendor maintenance or supplier management and reporting of shop management system (VMR). Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Ng, Kok Chuan (2010) Development of impact strength model for human synthetic bone. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Ngo, Siew Kee (2010) Effect of coconut fiber and egg albumen in mortar for greener environment. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nik Fatin, Nik Mohamed (2010) Laboratory study on stilling basin as an integral part of energy dissipator system. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nik Mohd Nazairen, Nik Cob (2010) Electrochemical study of heat treated SS304 stainless steel is simulated body fluid. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Mohd Qamarul Shafiq, Nik Ahmad Kamil (2010) Performance evaluation of solar flat plate collector. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nik Muhamad Hafizan, Nik Muhamad Zawawi (2010) The effect of carbon black loading on the tensile strength of rubber compound. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nik Muhammad Ridhwan, Nik Razali (2010) Design formulation of ostrich feed from palm kernelcake (PKC). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nik Nor Aziati, Abd Aziz (2010) Effect of substrate concentration and ph on succinic acid production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nik Rozaimah, Salim (2010) Simulation study of reactive distillation using Aspen plus for the production of MTBE. Faculty of Chemical and Natural Resource Engineering, Universiti Malaysia Pahang.

Nina Farhana, Mohd Jamaludin (2010) Study on bioethanol production from oil palm trunk (OPT) SAP by using saccharomyces cerevisiae kyokai no.7 (ATCC 26422). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Adila, Zulkepa (2010) Energy conservation for production of 100,000 mt/a isobutylene plant and effect to the plant economic. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Akmal, Zolkifli (2010) Design and development of integrated chassis of one seated urban car using embedded aluminium and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Asyikin, Ahmad Shuhaimi (2010) Hybrid membrane to remove impurities in waste water. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Faridatul Akhamar, Simbun (2010) Fabrication of bacterial cellulose, chitosan and essential oil biocomposite for antimicrobial effect. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Hazira, Mohamad Haidzir (2010) Experimental analysis of gyroscopic effect on vehicle vibration and accident potential. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Hizam Dzulkharnain, Mohd Hassan (2010) A numerical study on the effect of gasoline-hydrogen fuel blend on engine power and torque. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Noor Izyannisa, Sarjuni (2010) The fabrication of antibacterial composite from bacterial cellulose and betel leaves. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Noor Naimah, Yunus @ Junus (2010) Integrated body temperature detection system with smart touch device. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Noor Shahirah, Shamsul (2010) The effect of hydrogen enrichment on explosive limits in liquefied petroleum gas. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noor Suhada, Ab Razak (2010) The pre-sizing approach of dc-dc converters as the application to design a buck converter for the automotive domain. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noor Suwaibah, Hamdan (2010) Public sewage wastewater treatment by using electrocoagulation process. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noor Syazwani, Noor Sazali (2010) Removal of heavy metal from leachate using limestone and eichornia crassipes sp. (water hyacinth). Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang.

Noorhidayah, Khamis (2010) Degradation of lead (Pb) from car wash waste water sample using ultrasonic assisted extraction process. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Noorliana, Mohd Dahari (2010) Production of biodiesel from jatropha curcas L using sodium hydroxide and amano lipase M catalyst in an airlift reactor. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Afidatul Asni Semsudin, Semsudin (2010) Comparison of matrix converter and common converter for induction motor application using MATLAB. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nor Aini, Ahmad (2010) Stability of stevioside in Stevia extraction. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Ashikin, Abdul Hamid (2010) Optimization of encapsulation of natural dye by cyclodextrin using response surface methodology. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nor Asiah, Ahmad Sukori (2010) Development of wireless type K thermocouple temperature measurement. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nor Azlina, Mohd Ali (2010) Production of high temperature grease using spent bleaching earth (SBE). Faculty of Chemical and Natural Resources Engineering, University Malaysia Pahang.

Nor Aznirah, Abdullah (2010) Removal of ferrum (II) from industrial wastewater using water hyacinth (Eichhornia Crassipes). Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Azzah, Abu Azmi (2010) Automated guided conveyor (AGC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Emilia Zetty, Khairudin (2010) Halal food recognition system using barcode. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nor Fadilah, Yah (2010) Design and fabricate the smart rack shoes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Hazwani, Rosley (2010) Energy conservation for production of 50000 MT/A Isobutylene by using pinch analysis and effect to the plant economic. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Laily, Mat Aris (2010) Assessment of skills, knowledge and training for buildings maintenance managers in Kuantan, Pahang. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Nor Nashriq Azizi, Abd Shukor (2010) Evaluate fin performance of a space radiator to remove heat generated for outer space application. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nor Rizman, Abas (2010) Risk assessment for demoliition works in Malaysia. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nor Shahirah, Mohd Nasir (2010) Removal of heavy metals from industrial wastewater using activated carbon. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Shuhada, Shoberi (2010) The role of pH, temperature and catalyst type in caramel manufacturing process. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nor Syafarah, Zakariya (2010) Production of polyhydroxybutyrate (PHB) from bacillus cereus by using rice straw as substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norashazrin, Yusof (2010) Study of Cymbopogon citratus (lemongrass) essential oil extraction technique. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norashikin, Mohd Hatta (2010) Development of heterogeneous base catalyst for transesterification reaction. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norasima, Jamaludin (2010) Critical causes factor of fall accident in construction site. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Noraya, Mohd Kadir (2010) The effect of nitrogen dilution on flammability limits of LPG. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norazila, Alias (2010) Smart device tracking system using RFID (DeviceTrex). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Norazila, Kamarulzama (2010) An investigation on effect of quarry dust as sand replacement on compressive and flexural strength of foam concrete. Faculty of Civil Enginering and Earth Resources, Universiti Malaysia Pahang.

Norazila, Kamarulzaman (2010) An investigation on effect of quarry dust as sand replacement on compressive and flexural strength of foam concrete. Faculty of Civil Enginering and Earth Resources, Universiti Malaysia Pahang.

Norazlilah, Khamdan (2010) Sistem maklumat keluar masuk penghuni asrama SMK Kuala Krau menggunakan Mykad dan aplikasi mobile. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Norazlin, Md. Kalil (2010) Manufacturing of 10 cc volumetric displacement four stroke petrol model engine cylinder block using metal casting process. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norazma, Mukhtar (2010) The effect of vacuum pressure on the flammability limits of liquefied petroleum gas (LPG). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norazman, Daud (2010) Formulation of multipurpose grease using waste of palm oil manufacturing. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nordiyana, Ab.llah (2010) The assessment of building defects maintenance in hospital building. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Norfaezah, Noordin (2010) Kluang cooperation loan application. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Norhafzan, Junadi (2010) Removal of lead from waste oil using ultrasound assisted with rice bran. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norhidayu, Aliman (2010) Production of glucose from banana stem waste by using Strain B. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Noridah, Abdullah (2010) Removal of methyl red from aqueous solution using dried water hyacinth (Eichhornia crassipes). Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Norlia, Che Saad (2010) A novel process for demulsification of coconut oil milk emulsions by microwave radiation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Norlida, Jamil (2010) An evaluation of Ni-Alumina composite electroplating on mild steel. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norlista, Saliman (2010) The effect of nitrogen dilution on the flammability limits of hydrogen enriched natural gas. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nornabilah, Mohd Hamdan (2010) Color stability of natural colorant on blue pea flowers. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nornadia, Annuar (2010) Cost optimization of bathroom scale by using Boothriyd-Dewhurst DFA method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Norsalita, Abd Talib (2010) Optimization of pullulanase activity through design of experiment (DOE). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norseri, Mohd Mustaffa (2010) Oil pipeline wax deposition inhibition using chemical methods. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Norshafika, Yahya (2010) Effect of cobalt carboxylate on thermal degradation of polyethylene (HDPE). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norshahira, Mohd Nor (2010) Permeability and selectivity study of polyethersulfone membrane for gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Norshakila, Mohamad Sharif (2010) Intelligent alarm system for monitoring at LRT station. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Noryasmin, Ahmad Khashiri (2010) Family tree generator (FTGen). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Norzatulakma, Mohd Kodori (2010) Treatment of industrial wastewater at Gebeng area using Eichornia Crassipes sp. (Water Hyacinth), Pistia Stratiotes sp. (Water Lettuce) and Salvinia Molesta sp. (Giant Salvinia). Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Norzikri, Sairi (2010) RFID based security system for vehicle. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Adillah, Abdul Razak (2010) Effect of CO2 on production of jatropha oil methyl ester via sub/supercritical methanol. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Afika, Ishak (2010) Pre-treatment of waste water at wet market using Effective Microorganism (EM) technology. Faculty of Civil Engineering & Earth Resources, University Malaysia Pahang.

Nur Afiqa, Ishak (2010) Pre-treatment of wastewater at wet market using effective microorganism (EM) technology. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Afiza, Ishak (2010) The effectiveness of using effective microorganisms (EM) in fish market wastewater. Faculty of Civil Engineering& Earth Resources , Universiti Malaysia Pahang .

Nur Afnan, Abdul Halim (2010) Design and development of integrated chassis of three wheel prototype car using aluminum and FRP. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Aimin, Mohammed (2010) Development of renewable fuel from municipal wastewater. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang.

Nur Amalina, Mohamad Yuden (2010) Physical properties of concrete with 5.0 and 10.0 percent palm oil boiler stone (POBS) as fine aggregate replacement. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nur Amira, Abdullah (2010) Effect of different type of polymer concentration on asymmetri polysulfone membrane for CO2/CH4 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Amirah, Anuar (2010) Fingerprint extraction base on minutiae. Faculty Of Coumputer System And Software Engineering, Universiti Malaysia Pahang.

Nur Amirah, Mahamad Tajudin (2010) The potential of vegetable waste as substrate for alternative energy by using microbial fuel cell (MFC). Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Nur Ariffah, Md Sani (2010) Nitrogen (N2) removal in gas separation using polysulfone membrane. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Ashikin, Usri (2010) Experimental study of heat transfer coefficient for nanofluid with inserted tape. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Athirah, Hassan (2010) Color stability of natural colorant in turmeric. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atiah, Azmi (2010) Extraction of antioxidant activity, phenolic content and minerals in banana peel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Atikah, Ali (2010) Preparation and characterisation of physicochemical properties of aluminium oxide (Al2O3) – water nanofluids using two step methods. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Atiqah, Hussin (2010) Subgrade stabilization by using fly ash, case study in Universiti Malaysia Pahang (UMP). Faculty of Civil Enginering and Earth Resources, Universiti Malaysia Pahang.

Nur Atiqah, Ramlan (2010) Design and development of a manual breast pump : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Atteya, Aidilfitri (2010) Design, construction and commissioning of photobioreactor for production of microalgae for biodiesel. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Aziela, Mansor (2010) Jawi recognition system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Azira, Mohd Saleh (2010) Testing of unified power flow controller (UPFC) model in IEEE9 bus power system network using PSCAD/EMTDC and MATLAB software. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Daniati, Zulkifli (2010) Extraction of Zingiber officinale oil by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Dianaty, Nordin (2010) The extraction of papain from papaya leaves. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Diyana, Nordin (2010) The potential of cement stabilization in soft soil. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur Farah Azura, Ab Rahim (2010) Adsorption of methylene blue and ferrous ion from aqueos solution using coconut husk. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Farezza, Jasmi (2010) Assimilation of coconut coir pith in slow sand filter (SSF's) to improve water quality in water treatment plant. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Nur Farhana, Jasney (2010) The use of design of experiment in modeling the bioethanol production from oil palm trunk sap. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Fasehah, Maarop (2010) Reverse modeling of car door using laser scanning methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Fatmawati, Ab Manaf (2010) Fingerprint recognition for weapon borrowing process. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Nur Fitriah, Isa (2010) A study of indoor air quality in dormitories of Universiti Malaysia Pahang. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Nur Hamizah, Minhat (2010) Investigation of brass microstructure and mechanical properties using metal casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Hazila, Mohamad Azmi (2010) The extraction of amino acids from papaya leaves using supercritical carbon dioxide with water. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Hazwani, Rosli (2010) Comparison between primary method analysis and nir analysis in determination of nutrient content in tempeh. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Hidayah, Maslam (2010) Effects of substrate concentration and agitation rate on butanol production from palm oil mill effluent using clostridium acetobutylicum. Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang.

Nur Idayu, Samat (2010) Checking cat diseases symptoms system using rule-based technique. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Nur Idayu, Hamzah (2010) Automatic cloth retriever system. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Ismayuslini, Saberi (2010) Degradation of phenol by ultrasonic irradiation in addition of salt. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Izdiharr, Zainol (2010) Biosorption of iron (II) and methylene blue using tea waste. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Nur Izzah, Zakaria (2010) Food ordering system using mobile. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Nur Laili, Muhammad Lokman (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of clove essential oils. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nur Liyana, Nasrudin (2010) Biopetrol synthesized from rubber seed's fatty acid using fuller's earth as catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Nabilah, Mohamad Hamid (2010) Motion detection for PC based security system by using optical flow. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nur Naquiah, Mohammad Ali (2010) Automotive engine fault diagnosis using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nur Syamimi Salma, Abdillah (2010) Sistem pengurusan makanan ringan (SPMR) (Rosly Masum SDN BHD). Faculty Of Computer System And Software Engineering, Universiti Malaysia Pahang.

Nur Syazana, Hamzah (2010) Newton loop-node analysis study on gas pipeline network. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Syazwani, Md Zaki (2010) Study on performance of flat and elongated aggregate in low traffic road. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Nur Syuhada, Ramli (2010) Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nur Zainaim, Mohamed Nawi (2010) Degradation of Azoic congo red dye by using ultrasonic irradiation with additive. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nur Zaki, Arbain (2010) The in-situ properties of clay soil in Pekan using cone penetration test. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nur ‘Adilah, Ismail (2010) Characterization and antimicrobial analysis of chitosan composite biodegradable films with addition of ginger essential oil. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Nur'atiqah, Norhalim (2010) Optimization of xylose production from rice straw using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nuradibah, Hussin (2010) Batch extraction of caffeine from cocoa MCBC 1. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurfadila, Raaibi (2010) Laboratory study on baffled apron as an integral part of an energy dissipator system. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Nurfani Ekawati, Musthafa (2010) Removal of acid blue 25 dye by using dried water hyacinth from aqueos solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurfarahana, Yaacob (2010) A study of refurbishment of listed buildings into a new facilities. Faculty of Civil Enginering and Earth Resources , Universiti Malaysia Pahang .

Nurhana, Shafiee (2010) Effect of different types of coagulation medium on asymmetric polysulfone membrane for CO2/CH4 gas separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurhasiken, Raman (2010) Production of glucose from banana stem waste using Strain A. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nursyuhada Ashikin, Nor Izlanin (2010) Developments of PC based controller for buck converter driven DC motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Afida, Makhtar (2010) Effect of ph and glycerol waste amount on the glycerol recovery. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Ain, Che Zakaria (2010) Road safety level : a case study of major road linked Terengganu and Kuantan town. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Nurul Ain, Jalanni (2010) Study on bioethanol production from oil palm trunk SAP. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Ain, Muhammad (2010) Drug management system (DMS). Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Nurul Ain , Jalanni (2010) Study on bioethanol production from oil palm trunk SAP. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Anati, Ariffin (2010) Study of burnt rice husk performance in reedbeds to remove pollutant form landfill leachate. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Ashikin, Abdul Rahman (2010) Analysis optimization using numerical evaluation methods for 2D truss structure. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang .

Nurul Aslah, Ismail (2010) Quick determination of actual oil content in oil palm fruit bunch using near infra red (NIR) scanning spectrometer. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Atiqah Iliyani, Malekke (2010) The potential of fish processing waste from Clarias Batrachus and Pangasus Sutchi to generate alternative energy using microbial fuel cell. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang .

Nurul Basyirah, Samat (2010) Effect of coating on permeability and selectivity of polysulfone membrane for CO2/CH4 separation. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Farhana, Mohamad (2010) Development of truss finite element analysis software using ANSYS. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Nurul Farhanah, Che Bahar (2010) Development of asymmetric polyethersulfone (PES) mixed Matrix membrane for O2/N2 separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Fatihah, Mohamad (2010) Power quality and reactive power compensation study. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nurul Haizan, Ahmad (2010) Studies on flow performance of crude palm oil in transportation handling using different type of mechanisms. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Hanim, Mat Noor (2010) Production of poly-hydroxy butyrate (PHB) by Bacilius Cereus using banana stem as a substrate. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Hidayah, Muhamad (2010) Foulant analysis in cross-flow filtration using resistancein-series model. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Hidayah, Abdul Samat (2010) Study of ground source heat pump as cooling system for local applications. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Nurul Ilyana, Ali (2010) Application of local biomass as an adsorbent for removal of phenol from aquoeus solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Nurul Izwanie, Rasli (2010) Optimization of xylose production from sugarcane bagasse using response surface methodology (RSM). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Nurul Nadia, Abd Karim (2010) Success factor to be an excellent project manager. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Nurul Nadia, Yahya (2010) Monitoring children in the shopping mall using RFID technology-controlling module. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Nurul Nadiah, Md Aini (2010) Biodegradable biocomposite starch based films blended with chitosan and gelatin. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Nurul Zarina, Md Isa (2010) Gender recognition based on facial image extraction. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Nuruldiyanah, Kamarudin (2010) Modelling of wood resin interaction. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Olivea, Karen Buhan (2010) Development of wireless RTD temperature measurement using decade box. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Omar Syah Jehan, Elham (2010) Biopetrol synthesized from oleic acid heterogenous Catalytic cracking by using granular metal as catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ong, Kah Siang (2010) Simulation heart beat monitoring system. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Ong, Kian Chun (2010) MC68HC11 microcontroller based universal memory programmer. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Patrick, Albrecht Raphael (2010) Degradation Of Methylene Blue Using Ultrasonic Irradiation: A Comparison Of Ultrasound With And Without Salt (Sodium Chloride). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

R. Periasamy, Veethia (2010) Internal chatting system for FSKKP students, UMP environment. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Rabiatuladawiah, Kamaruddin (2010) Design of a small heat exchanger (Shell-and-tube type). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rahmat, Che Hassim (2010) Investigate the potential of wind environment for natural ventilation. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Raja Sharul Azuan, Raja Kamaralzaman (2010) Development of liquid spray triggering and control. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Rajaletchumy, Veloo Kutty (2010) Evaluation of palm oil mill effluent (POME) by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Rajanderan, R Sothilakshmi (2010) Demulsification of water-in-crude oil emulsions via microwave heating technology. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ramanan, Perumal (2010) Production of natural protein using chicken feather. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ramasamy, Sangeetha (2010) Evaluation of road safety level of federal route 3 (F3) and state route C17 (C17) : b a case study of Kuantan main entrance road from Pekan. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Ravindren, Umaya Latha (2010) Cattle management system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Ridwan, Yusman (2010) Concentration of biopetrol synthesized from oleic acid through heterogeneous catalytic cracking using zeolite as catalyst. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Roswani, Shaimi (2010) Extraction of papain enzyme from papaya leaves using enzyme assisted method. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Rozialfi, Alwaner (2010) Dilute sulfuric acid pretreatment for cellulose recovery from sawdust. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ruhama, Walled (2010) Simulation of natural ventilation system in chemistry laboratory of faculty chemical and natural resources engineering lab building. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Ruwaida, Awang (2010) Removal of malachite green from aqueous solution by using dried water hyacith (Eichhornia crassipes). Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Ruzaimi, Zainon (2010) Optimization of surface roughness in milling using neural network (NN). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sahwal Waty, Marno (2010) Effects of hole taper on mild steel machining using injection flushing type of electrical discharge machine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Saidah Malihah, Mansor (2010) Batik wastewater treatment using membrane bioreactor (MBR). Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Salmah, Mahful (2010) Development of solar powered notebook. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sandra Diana, Md Zin (2010) Production and characterization of bio oil from wood sawdust via fast pyrolysis. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Santhana Julias, Henry (2010) Modal analysis for small engine crankshaft. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Saodah, Ali (2010) Production of plastic from sea algae. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Saparudin, Wasimin (2010) Antibiotic purification by using metal ion affinity zeolite adsorbent. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Saw, Chin Hooi (2010) Turbulence slapping technique effect on the multiphase flow behavior in pipeline. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Selvan, Murugan (2010) Preparation and application of polyaluminium silicate chloride in coagulation process. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shafura, Abidi (2010) Integrated of fish and vegetable waste from fresh market to generate alternative energy. Faculty of Civil and Environmental Engineering , Universiti Malaysia Pahang .

Shahaidah, Shariff (2010) Fabrication and antimicrobial analysis of composite biodegradable film from breadfruit. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Shahaneem, Sa'hari (2010) A study on the influence of matrix distribution to the properties of polymer matrix composite (PMC). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Shahida, Mohd Said @ Sayed (2010) Static and dynamic impact of HVDC, TNB-EGAT interconnection system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Shahrul Afzam, Mohamad (2010) Detection of MAC address on remote computer. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Shahrul Anuar, Abd Rahman (2010) Reinforcement of plastic using empty fruit bunch (EFB) of palm oil waste. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Shamsul Arifin, Zinal Abidine (2010) Development of DC power supply using power electronic applications. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sharifah Ainun Nor, Khaidzi (2010) Effect of different type of solvents on asymmetric polysulfone membrane for co2/ch separation. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharifah Rafidah, Syed Hamid (2010) A study on the effect of injection moulding process parameters to the properties of injected parts. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sharmilla, Arumugam (2010) Development of heterogeneous base catayst for transesterification reaction. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sharon Yong, Win Tin (2010) Deterioration of building material at old shop building. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Sia, Kee Sieng (2010) Comperative study of reinforced concrete design of column between American Code (ACI 318-05) and British Standard (BS 8110-97). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Sia, Lih Yin (2010) Wall avoiding balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siak How, Bong (2010) Aquaculture effluent reused as a sustainable alternative water supply for landscape irrigation using drip irrigationl. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Singanathan, Jayabalan (2010) Production of methane from palm oil mill effluent using membrane anaerobic system. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sinnathamby, Guganeswaran (2010) Biodiesel production from Jatropha curcas via two-steps catalyzed process. Faculty of Chemical & Natural Resources Engineering, University Malaysia Pahang.

Sinnathamby, Guganeswaran (2010) Biodiesel production from jatropha curcas via two-steps catalyzed process. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Afifah, Muda (2010) Effects of nymphaea caerulea on wastewater quality from palm oil production. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Aisah, Jamil (2010) The effect of polymer concentration on the development of polysulfone (PSU) membrane for carbon dioxide(CO2)and methane (CH4) separation. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Siti Aisyah, Yahya (2010) Spray drying of Ati-ati plant boiling extract. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Badriah, Harun (2010) Development of hybrid membrane (polysulfone and zeolites) for gas separation application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Fatimah, Mohamad Ali (2010) Spray dried durian powder. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Ferdaus, Aspari (2010) CFD simulation of hydrodynamics in spray dryer. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Haifullia, Ayob (2010) Fuel-saving device rod electrode based on gasoline for fuel car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Hajar, Abdol Gani (2010) The potential of domestic effluent for irrigation of landscape plant. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Siti Hajar, Abdul Halim (2010) Biopetrol synthesized from rubber seed oil through heterogeneous catalytic cracking using kaolinite as catalyst. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Hajar, Mohd Noh (2010) Uncertainty analysis for the unknown function using artificial neural network (ANN) approximated function. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Hazriah, Hamzah (2010) Effect of time and temperature on butanol production from palm oil mill effluent (POME) by anaerobic fermentation using clostridium beijerinckii. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Hazwani, Tahir (2010) Effect of pH on whey protein separation using high performance tangential flow filtration. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Khadijah, Ghazali (2010) Chemical modification and characterization of kenaf fiber. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Khairani, Alias (2010) Automatic tracking object using simple robotic arm. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Murni, Mohamad Khadri (2010) Production of lignocelluloses from palm oil empty fruit bunch. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nadiah, Mustafa Kamal (2010) Effect of fermentation time and temperature on butanol production from palm oil mill effluent (POME) by using Clostridium Acebutylicum. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Norazila, Zahari (2010) Design and development of a durian peeler : an ergonomics approach. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Norazizah, Jamil (2010) Removal of iron (ii) using various activated sludge. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Norlizah, Haji Saiman (2010) Managing physical hazards on construction site. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Siti Nur Baizura, Abu Bakar (2010) Testing of statcom model in IEEE 0 bus power system netwotk using PSCAD and MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Nur Farahana, Ismail (2010) Fabrication and antimicrobial analysis of composite biodegradable film from yam starch. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Siti Nurmaisarah, Abdul Aziz (2010) Speech processing for makhraj recognition (design adaptive filter for noise removal). Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Nurnadirah, Ahmad Latfi (2010) Development of control shceme for DC motor speed control applications. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Siti Nurul Ain, Mohd Yusof (2010) Industrial wastewater treatment via photo fenton. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Siti Rohaida, Jamaludin (2010) A production of activated carbon using local agricultural waste for groundwater treatment in Universiti Malaysia Pahang. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang .

Siti Sarah, Ahmad (2010) Modal analysis of fixed-fixed beam. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Siti Zuulaika, Rejal (2010) Extraction of antioxidant, phenolic content and mineral content from guava peel. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sivalingam, Narendran (2010) Studying the effect of carbon powder addition on the performance of natural mucilage dra flowing in aqueous media. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Soon, Chi Wei (2010) Maze solving balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Su Najwa, Mohamed (2010) Protein purification by using immobilized metal ions affinity zeolite adsorbent. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Subramaniam, Vissaliny (2010) Sewage sludge treatment by membrane anaerobic system (MAS). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Sufinah, Yussof (2010) Development and characterization between polyethersulfone/polysulfone (PES/PSF) micible blend with primary polymer (PES and PSF) membrane for O2/N2 separation. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Suhaida Noorein, Iskandar Mirza (2010) Critical success factors and barriers for industrialised building system (IBS) adoption in construction project. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang.

Suhaila, Sulong (2010) Methods to overcome the effects of fluctuation in cement prices to local contractor. Faculty of Civil Engineering, & Earth Resources, Universiti Malaysia Pahang .

Suhaili, Sabdin (2010) Use of nanoparticle in the wood composite to enhance the heat transfer. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Suhaimi, Mohd Sukri (2010) Modeling and simulation of the supersonic jet nozzle for oxygen injection system at electric arc furnace. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Suhara, Sidek (2010) A study on the performance of limestone filter for the treatment of domestic wastewater. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang .

Sukma Citra, Jafirin (2010) Testing of static synchronous series compensator (SSSC) model in IEEE 9 bus power system network using PSCAD and MATLAB software. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sukri, Deraman (2010) Investigation of compressive strength foam brickwall panel with different bonding by using stretcher & flemish bond. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Sulaiman, Mat Rani (2010) Effectiveness of silica fume lightweight foam concrete wall panel with window opening under axial load. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Sumi Murni, Zakaria (2010) The development of control scheme for single phase induction motor. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Sunil Shanaz, Redzuan Perpinder (2010) Power system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Sup, Billy (2010) Effect of Absorber plate material on flat plate collector efficiency. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Suriani, Abdullah (2010) Heavy metals removal from industries wastewater by using seaweed through biosorption process. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Syafiqah, Hud (2010) Glucose production from oil palm trunk. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Syahrizad, Muhamad (2010) Optimization of surface texture in milling using response surface methodology. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Syaifudin, Ramzan (2010) Courseware on e-solat in mobile. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Syaimaa Rosman, Andrew (2010) Development of molecular imprinted biosorbent by using orange peel for Pb2+ removal from aqueous solution. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Syamsul Rais, Ahmed Tazalli (2010) Solar LED based traffic light. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Syamsutajri, Syamsol Bahri (2010) Fabrication and antimicrobial analysis of composite biodegradable film from chempedak seeds. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Syazana, Abdul Aziz (2010) The application of industrialised building system in residential project. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Syed Mazwan, Syed Abd Rashid (2010) Improving the fluid catalytic cracking unit in term of energy consumption, a simulation study. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Syed Mohamad Amiruddin, Syed Saleh (2010) Actuation system design for solar car. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tam, Siow Fui (2010) Stability and chemical demulsification of water-in-crude oil emulsion (chemical method). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tan, Boon Kei (2010) Guide signs for approach roads to UMP. Faculty of Civil and Environmental Engineering, Universiti Malaysia Pahang .

Tan, Eng Siang (2010) Effect of coconut fiber and egg albumen in concrete for greener environment. Faculty of Civil Engineering And Earth Resources , Universiti Malaysia Pahang.

Tan, Ming Sien (2010) Simulation on transdermal patch for breast cancer therapy by using COMSOL. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Tan, Piow Yon (2010) Line follower balbot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Tan, Tit King (2010) RFID implementation on domestic animals. Faculty of Computer Systems and Software Engineering, Universiti Malaysia Pahang.

Tan, Inn Shi (2010) Production of biodiesel through transesterification of sunflower oil using SiO2/50% H2SO4 solid acidic catalyst. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tan, Wannurzana Nyuk May (2010) Analysis of grounding and harmonics in power quality issues. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Tan, Kim Pieu (2010) Comparison of microwave-assisted hydrodistillation with the conventional hydrodistillation method in the extraction of essential oil (lemongrass and star anise). Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tang, Jian An (2010) Compressive strength of normal strength concrete (NSC) using British standard, euro code and non-destructive test approaches. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

Tanti Zanariah, Shamshir Ali (2010) Vibration investigation of passenger car front suspension system under various road condition and driving maneuvers. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tat Wi, Charomie (2010) Implementation of hybrid encryption method using caesar cipher algorithm. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Taufik, Mohd Nor (2010) Current and frequency control of induction generator : simulation using MATLAB. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Tee, Chun Teck (2010) Productivity improvement for furniture industry by using witness simulation software. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Teh Ubaidah, Noh (2010) The effectiveness of natural adsorbents for multi dye system. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Telun, Floris (2010) Experimental study of preparing sulfuric acid from sulfur dioxide using catalytic photosynthesis method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tengku Mohd Fadzli, Tengku Amin (2010) A study of nitrogen dilution effect on the flammability limits of methane. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Teoh, Tze Yang (2010) Study of the combined effects of oxidation and adsorption process in removing MTBE from wastewater. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Tg Kamarul Azhan, Tg Kamaruddin (2010) Design and fabricate rocket engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tham, San Chin (2010) Reaction kinetics of the catalytic esterification of oleic acid with methanol. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Tham, Sai Hou (2010) Application of AI technique for optimal location of UPFC device. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Thanachelvan, Rajan (2010) Rope climbing robot. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Thanikaikumaran, R. Kuppusamy (2010) PC based control smart home system using Zigbee wireless technology. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Thinesh Chander, Sawalingam (2010) Design and development of micro EDM using micro actuator tool feed system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Thong, Li Mun (2010) Investigation of turbulence slapping technique effect on the flow behavior in pipelines. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Thong, Yee Han (2010) Preliminary design of single rubber belt with electro-mechanical continuously variable transmission (CVT). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tiew, Lee Yin (2010) Finite element analysis of trapezoidal web beam to column end plate connection. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Ting, Alan Ik Fong (2010) Determining the permeability of soil at Universiti Malaysia Pahang, Gambang Campus using guelph permeameter kit. Faculty of Civil Engineering & Earth Resources , Universiti Malaysia Pahang .

Tio, Thiam Boon (2010) Biodiesel production via homogeneous lewis acid catalyzed transesterification. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Tiong, Chung Shia (2010) Computational laser micromachining for machining PMMA. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tuan Mohd Shakir, Abu Bakar (2010) Design and manufacture the outer shell of diesel furnace. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Tuan Rosmina, Tuan Ismail (2010) Biodegradation behavior of palm oil fiber reinforced starch biocomposite. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Tugau, Juan (2010) The effect of filler loading on the tensile strength of natural rubber compound. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Ummi Hajira, Khairuddin (2010) Formulation of medicinal toothpaste from jatropha carcus latex. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Ummi Izni, Mohamad Tarmizi (2010) Study of shear for steel fibre reinforced concrete beam with ratio 0.2%, 0.4%, 0.6%, 0.8% and 1.0%. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Unida Izwani, Md Dun (2010) Fault detection in three phase induction motor using artificial intelligence. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Vickneswaran, Nagaratnam (2010) Pipe-line transportation of heavy oil-in-water emulsion. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Vijay, Rajaindran (2010) Halba mucilage as a new drag reducing agent in aqueous media flowing in pipelines. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Vijayakumar, Marimuthu (2010) CFD analysis of air intake system of 1.6 l Proton Waja engine by adding guide vanes. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Voon,, Vincent Boo Chuan (2010) Effect of concrete compressive strength with various natural additives fiber for green environment. Faculty of Civil & Enviromental Engineering, Universiti Malaysia Pahang .

W. Zakira, Wan Mohd Najib (2010) Hotel promotion using push-based technology. Faculty of Computer System & Software Engineering, Universiti Malaysia Pahang.

Wahida, Amat Fadzil (2010) Extraction of Zingiber Zerumbet (L) Smith oil by using soxhlet extraction method. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Wahidah, Ab Rahman (2010) Removal of ferrum (II) from industrial waste water by using dried water hyacinth Eichhornia Crassipes. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Wan Anis, Wan Azman (2010) Ultrasonic-assisted extraction (UAE) of tannins from stem bark of Jatropa Curcas. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Wan Hasmida, Wan Hassan (2010) Strength characteristic of soft soil reinforced with coir fibres. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Hazmin, Wan Osman (2010) Performance of PID controller for engine speed controller using CVT. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohamad Asyraf, Wan Zahari (2010) Effect of pipe diameter in piping system using acoustic emission technique. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohamad Dasuqi, Wan Ma'sor (2010) Simulation of bubles rise in cavity using Lattice Bolztmann [sic] method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohamed Irman, Wan Mustapha (2010) Modelling of oil water phase inversion in pipeline. Faculty of Chemical Engineering & Natural Resources, Universiti Malaysia.

Wan Mohd Hasif, Wan Haron (2010) Computational fluid dynamics analysis of propeller with and without fins. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Mohd Saifuddin, W Zamani (2010) Active sway control of a gantry crane system using delayed feedback signal controller. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wan Mohd Zainuddin, Wan Ismail (2010) The determination of potential evapotranspiration based on data UMP weather station. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Wan Muhammad Mukhlis, Wan Ab Latif (2010) Numerical simulation of liquid atomisation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Wan Munir Najmi, Wan Ab Aziz (2010) Investigation of abundant treated sea sand with different percentages in concrete brick making ratio 1:6. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Wan Nor Fathiyah, Wan Yunus (2010) Skin cancer detection system. Faculty of Systems Computer & Software Engineering, Universiti Malaysia Pahang.

Wan Norazlinda, Wan Zakaria (2010) Effect to reflux ration on separation of azeotropic mixtures in batch distillation column. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Wan Norziela, Wan Rosli (2010) Wireless based home security with automation system. Faculty Of Electrical & Electronic Engineering, Universiti Malaysia Pahang.

Wan Nur Salwani, Wan Jusoh (2010) Synthesized biopetrol from rubber seeds: heterogeneous catalytic cracking by granular copper. Faculty of Chemical Engineering and Natural Resources , Universiti Malaysia Pahang .

Wan Rohaya, Wan Idris (2010) Influence of recycled HDPE as partial coarse aggregate replacement on permanent deformation of modified asphalt mixture. Universiti Malaysia Pahang, Faculty of Civil Engineering & Earth Resources.

Wong, Pei Wen (2010) Production of virgin coconut oil (VCO) via combination of microwave and centrifugation method. Faculty of Chemical and Natural Resources Engineering , Universiti Malaysia Pahang .

Wong, Yin Ying (2010) Investigation mechanical properties and microstructure of aluminium silicon alloy using sand casting. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yap, Lee Leng (2010) Smart kitchen : recipe recommendation system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Yeap, Leong Hooi (2010) Corrosion prevention of steel sample in aqueous solutions and its mechanical properties. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yeung, Cheryl Suet Ling (2010) Production of high temperature grease from waste lubricant sludge and silicone oil. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Yip, Sook Chan (2010) Online trip advisory system. Faculty of Computer Systems & Software Engineering, Universiti Malaysia Pahang.

Yong, Chee Ping (2010) Feasible laser parameters in fabrication of MEMS structures on silicon. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Yong, Sharon Wen Tin (2010) Performance of mortar with egg albumen. Faculty of Civil Engineering and Earth Recourses, Universiti Malaysia Pahang.

Yong Ming, Lee (2010) Vapor-liquid equilibria in the systems methyl oleate + methanol & methyl oleate + water. Faculty of Chemical & Natural Resource Engineering, Universiti Malaysia Pahang.

Yuni Khalida, Riazuddin (2010) A comparative study on the extraction of betacyanin in the peel and flesh of dragon fruit. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Yusri, Yusof (2010) Design and analysis of the solar car body. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zaidatul Akmal, Mohd Mustapha (2010) Optimization of glucose production from sugarcane bagasse using response surface methodology (rsm). Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang.

Zainulariffin, Awang (2010) Failure analysis of pipe joint spiral wound gasket using finite element analysis (FEA). Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zainurulaini, Zainal Abidin (2010) Risk and mitigation of vehicles parking for Gambang University Malaysia Pahang (UMP). Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zanatul Nadia, Zakaria (2010) Design of fiberglass rescue boat by using waste plastic bottles. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zarifah Nadiah, Mohamad Salleh (2010) To produce the activated carbon from matured palm kernel shell. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang .

Zarul Shazwan, Zullkafli (2010) Failure of pistons engine using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zianor Azrina, Z. A. (2010) Whey protein fraction based on Q-sepharose anion exchange chromatography. Faculty of Chemical & Natural Resources Engineering , Universiti Malaysia Pahang.

Zuhairi, Zakaria (2010) Shrinkage deformation of different shape of foamed concrete specimen. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang.

Zulhusni, Razaob (2010) Influence of bottom ash from coal fire boiler in cement brick toward mechanical properties. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.

Zulkifli, Husin (2010) Prediction of fatigue life on lower suspension arm subjected to variable amplitude loading. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.

Zuriana, Sidi Ahmad (2010) Effect of agitation rate on butanol and ethanol production from palm oil mill effluent by Clostridium acetobutylicum. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang.

Other

Pejabat, Naib Canselor UMP (2010) Laporan Tahunan 2010 : Universiti Malaysia Pahang. Universiti Malaysia Pahang.

UMP, LIB (2010) Slaid Seminar Pengurusan Ilmu 2010. UMP LIB.

Image

Library, UMP (2010) Dusun Eco 1. [Image]

Library, UMP (2010) Dusun Eco 2. [Image]

Library, UMP (2010) Dusun Eco 4. [Image]

Library, UMP (2010) Dusun Eco 5. [Image]

Library, UMP (2010) Environmental Scanning. [Image]

Library, UMP (2010) Gambar Audit 5S. [Image]

Library, UMP (2010) Gambar Dusun Eco Resort. [Image]

Library, UMP (2010) Gambar Perabot Perpustakaan UTEM. [Image]

Library, UMP (2010) Kayak & Berkelah. [Image]

Library, UMP (2010) Seminar Pengurusan ILMU 2010. [Image]

Library, UMP (2010) dusun eco 3. [Image]

This list was generated on Thu Mar 28 20:23:13 2024 +08.