Items where Division is "Institute of Postgraduate Studies" and Year is 2021

'

'Aqilah, Abd. Ghani and Syifak, Izhar Hisham and Nur Alya Afikah, Usop and Nor Bakiah, Abd Warif (2021) Watermarking techniques for mobile application: A review. In: Innovative Systems for Intelligent Health Informatics. Lecture Notes on Data Engineering and Communications Technologies, 72 . Springer, Switzerland, 796 -806.

'Aqilah, Abd. Ghani and Syifak Izhar, Hisham and Nurul Wahidah, Arshad (2021) Hilbert-peano and zigzag: Two approaches mapping pattern of digital watermarking for text images authentication. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. pp. 433-437.. ISBN 978-1-6654-1407-4 (Published)

A

A., Nugroho and Z., Bo and R., Rizalman and W. H., Azmi and G., Najafi and F., Khoirunnisa (2021) Extensive examination of sonication duration impact on stability of Al2O3-Polyol ester nanolubricant. International Communications in Heat and Mass Transfer, 126 (105418). pp. 1-14. ISSN 0735-1933. (Published)

A. A., Qasem and M. A., Al-Mekhlafi and F. M., Yahaya (2021) The effect of palm oil fuel clinker powder and cockleshell powder as cement replacement on durability properties of the concrete mortar. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012037). ISSN 1755-1307 (Published)

A. A. G., Nadiatul Adilah and H., Hannani (2021) Comparison of methods to estimate missing rainfall data for short term period at UMP Gambang. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012027). ISSN 1755-1307 (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Energy Harvesting on Pavement: A Review. International Journal of Renewable Energy Research, 11 (3). pp. 1250-1266. ISSN 1309-0127. (Published)

A. F., Ahmad and A. R., Razali and F. R. M., Romlay and I. S. M., Razelan (2021) Influence of polymer coated aggregate on the aggregate impact and crushing value. In: International Postgraduate Conference on Mechanical Engineering , 19th-20th January 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012039). ISSN 1757-899X (Published)

A. H., Mustafa and S. S., Rashid and B. H., Sikder and A. A., Sasi and M. H., Rahim (2021) Immobilization of cellulase enzyme onto iron oxide nanoparticles to improve thermal and pH stability. In: IV International Baltic Conference on Magnetism (IBCM-2021) , 29 August - 2 September 2021 , Kaliningrad, Russia (Virtual Conference). . (Unpublished) (Unpublished)

A. Q., Zaifuddin and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak and Shamini, J. (2021) Influence of laser surface texturing (LST) parameters on the surface characteristics of Ti6al4v and the effects thereof on laser heating. Lasers in Engineering, 51 (6). 355 -367. ISSN 0898-1507. (Published)

A. Q., Zaifuddin and F., Zulhilmi and Aiman, Mohd Halil and Quazi, M. M. and M., Ishak (2021) Enhancement of laser heating process by laser surface modification on titanium alloy. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8310 -8318. ISSN 2231-8380 (online). (Published)

A. S., Saud and M. S., Ahmad and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim (2021) Study of solvent effect on dispersion of LT/Al2O3 catalyst for facile synthesis of cyclic carbonate from renewable sugar. In: 1st International Conference (Virtual) on Sustainable Energy and Catalysis , 16 -17 Feb. 2021 , Virtual. pp. 36-37.. ISBN 978-967-2401-46-9 (Published)

AL-Amri, Mohammed Amer Omar and Razali, Muda (2021) Development of a microcontroller-based gas detection system using wireless sensor network. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ab Sukor, N. S. and Sutjipto, A. G. E. and Shaitir, A. and Mohamad Ashry, Jusoh (2021) Piezoelectric properties of Mg doped ZnO thin film using sol-gel method and spin coating. Current Science And Technology (CST), 1 (1). pp. 9-14. (Published)

Abdel Rahman Mohamed Ismail, Farouk Abdel Mageed Rady (2021) Analyzing the cost-effectiveness of enhancement approaches for rehabilitating water distribution network. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Rahman, Abdul Rahimi).

Abdelrahman, M. Farouk and Rahimi, A. Rahman and Noor Suraya, Romali (2021) Economic analysis of rehabilitation approaches for water distribution networks: comparative study between Egypt and Malaysia. Journal of Engineering, Design and Technology, 19 (5). pp. 1-20. ISSN 1726-0531. (Published)

Abdul, Wahab and Muzamir, Hasan and Ud Din, Zaheer and Zaman, Qamar Uz (2021) Heavy metals concentration in undisturbed peat soil at Pekan District, Pahang, West Malaysia. Maejo International Journal of Energy and Environmental Communication, 3 (2). pp. 23-31. ISSN 2673-0537. (Published)

Abdul Haleem Habeeb, Mohamed and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Anwar, P. P. Abdul Majeed and Mohamed Heerwan, Peeie and Choong, Chun Sern and Baarath, Kunjunni (2021) Rain classification for autonomous vehicle navigation using machine learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 895-903., 730. ISBN 978-981334596-6 (Published)

Abdul Rafiq, Abdullah and Tuty Asmawaty, Abdul Kadir and Siti Normaziah, Ihsan (2021) A review of artificial intelligence in serious game for public health. In: Journal of Physics: Conference Series;3rd International Conference on Computational Science and Information Management, ICoCSIM 2019 , 21 - 24 March 2019 , Mataram, Lombok. pp. 1-9., 1830 (1). ISSN 17426588 (Published)

Abdul Rahimi, Abdul Rahman and Badraddin, A. K. and Muzamir, Hasan and Nor’Aini, Yusof (2021) Success Factors for Construction Waste Recycling in Developing Countries: A Project Management Perspective. In: Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) , 10-14 March 2020 , Portugal. pp. 189-201., 35. ISBN 978-3-030-76543-9 (Published)

Abdul Rahman, Ahmad Fikri Hadi and Ahmad Khushairi, Zulsyazwan and Abu Seman, M. N. and Mohamed, Khayet (2021) Optimization of UV-photografting factors in preparation of polyacrylic-polyethersulfone forward osmosis membrane using response surface methodology. Korean Journal of Chemical Engineering, 38 (11). pp. 2313-2323. ISSN 0256-1115 (Print); 1975-7220 (Online). (Published)

Abdul Rahman, Mohd Kasim and Siti Farah Haryatie, Mohd Kanafiah and Syazwani, Mohd Zokri and S., Shafie (2021) Numerical solutions of convective transport on Brinkman-viscoelastic fluid over a bluff body saturated in porous region. Case Studies in Thermal Engineering, 28 (101341). pp. 1-13. ISSN 2214-157X. (Published)

Abdulah, Nayeem and Mohd Faizal, Ali and Jun Haslinda, Shariffuddin (2021) Synthesis and applications of inverse vulcanized polysulfides from bio-crosslinkers. Material Today: Proceedings, 47 (19). ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Abdullah, Baqadeem Abdullah Omar and F. M., Jakarni and A. K. S., Al-Shakhrit and Khairil Azman, Masri (2021) The usage of recycled glass in hot mix asphalt: A review. Construction, 1 (1). pp. 29-34. ISSN 2785-8731. (Published)

Abdulwahid, Omar Arman (2021) Numerical investigation of exhaust gas reforming of natural gas for on-board hydrogen-rich syngas production in spark ignition engine. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ftwi Yohaness, Hagos).

Abu Jafar, Md Muzahid and Md. Abdur, Rahim and Saydul Akbar, Murad and Syafiq Fauzi, Kamarulzaman and Md Arafatur, Rahman (2021) Optimal safety planning and driving decision-making for multiple autonomous vehicles: A learning based approach. In: 2021 Emerging Technology in Computing, Communication and Electronics (ETCCE) , 21-23 Dec. 2021 , Dhaka, Bangladesh. pp. 1-6.. ISBN 978-1-6654-8364-3 (Online); 978-1-6654-8365-0(PoD) (Published)

Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman and Md Arafatur, Rahman (2021) Comparison of PPO and SAC Algorithms towards decision making strategies for collision avoidance among multiple autonomous vehicles. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan. pp. 200-205.. ISBN 21136432 (Published)

Adam, Khalid and Izzeldin, I. Mohd and Ibrahim, Younis (2021) A selective mitigation technique of soft errors for DNN models used in healthcare applications: DenseNet201 case study. IEEE Access, 9 (9419032). 65803 -65823. ISSN 2169-3536. (Published)

Adam Ismail Hammad, Khalid and Mohamed Abdelaziz, Izzeldin Ibrahim and Younis, Younis M. (2021) The impact of the soft errors in convolutional neural network on GPUS: Alexnet as case study. Procedia Computer Science, 182. pp. 89-94. ISSN 1877-0509. (Published)

Adarsh Kumar, Pandey and Reji, Kumar. R and M., Samykano (2021) Solar energy: direct and indirect methods to harvest usable energy. Dye-Sensitized Solar Cells Emerging Trends and Advanced Applications. pp. 1-24. ISSN 978-0-12-818206-2. (Published)

Adeleke, A. Q. and Adeniyi, A. W. and Muuka, G. N. (2021) The influence of delay factors on Pahang Malaysian construction industry: A PLS-SEM approach. International Journal of Industrial Management (IJIM), 11 (1). 206 -216. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Ahlam Mahmoud, Al-Jabali (2021) Temperature dependent viscosity on single-phase and two-phase flow of eyring powell fluid over a vertical stretching sheet. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2021) MIRACLE FINGERS: Meningkatkan Skor Koheren dan Pencapaian Akademik Pelajar Program GALUS. Journal of Sciences and Management Research, 7 (April 2021). pp. 1-22. ISSN 2600-738X. (Published)

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2021) Penggunaan Teknik Biofeedback Berbantukan Latihan Zikir Dalam Meningkatkan Skor Koheren Dan Pencapaian Akademik Pelajar Program GALUS. International Journal of Humanities Technology and Civilization, 3 (10). pp. 64-77. ISSN 2600-8815 (Online) 2289-7216 (Printed). (Published)

Ahmad, Omar and Muhammad Nubli, Abdul Wahab (2021) Penggunaan Teknik Biofeedback berbantukan latihan zikir dalam meningkatkan Skor Koheren dan pencapaian akademik pelajar Program GALUS. International Journal of Humanities Technology and Civilization (IJHTC), 3 (10). pp. 64-77. ISSN 2289-7216 (Printed); 2600-8815 (Online). (Published)

Ahmad Azzreen, Dalawi (2021) Analysis and study of powerefficient sar adc for active rfid sensor. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Samsuri, Fahmi).

Ahmad Faizrin, Fuzlin and Ahmad Salihin, Samsudin (2021) Studies on favorable ionic conduction and structural properties of biopolymer electrolytes system-based alginate. Polymer Bulletin, 78. pp. 2155-2175. ISSN 0170-0839(Print); 1436-2449(Online). (Published)

Ahmad Faizrin, Fuzlin and Izan Izwan, Misnon and Nagao, Yuki and Ahmad Salihin, Samsudin (2021) Study on ionic conduction of alginate bio-based polymer electrolytes by incorporating ionic liquid. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1455-1459., 51. ISSN 2214-7853 (Published)

Ahmad Faizrin, Fuzlin and Nagao, Yuki and Ahmad Salihin, Samsudin (2021) Ionic conductivity study of ethylene carbonate as a plasticizer in alginate bio-based polymer electrolytes. Macromolecular Symposia, 397 (1). pp. 1-4. ISSN 1521-3900. (Published)

Ahmad Firdaus, Zainal Abidin and Yew Khen, Yong and Mohd Faizal, Ab Razak and Wan Isni Sofiah, Wan Din and Mohd Zamri, Osman and Che Akmal, Che Yahaya (2021) Where is my organ? Organ donation with blockchain system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ahmad Irfan, Ikmal Hisham and Afiq Adli, Razali and Mansor, Sulaiman and Tuan Sidek, Tuan Muda and Baharrudin, Zainal and Ishak, Suliaman and Radiah, Abdul Ghani (2021) i-Mawaqit : Kalkulator komparatif zon waktu solat. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ahmad Luqman, Nazrudin and Anis Farihan, Mat Raffei and Nur Shamsiah, Abdul Rahman (2021) Smart kitchen mobile based application with Arduino module features. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ahmad Nasser, Mohd Rose and Mohd Fadzil Faisae, Ab. Rashid and Nik Mohd Zuki, Nik Mohamed and Muhammad Aiman Safwan, Jubri (2021) The implementation of lean manufacturing and ergonomics in small medium enterprise – Case study. In: IOP Conference Series: Materials Science and Engineering; 1st Process Systems Engineering and Safety Symposium 2019, ProSES 2019 , 4 September 2019 , Kuantan, Pahang, Malaysia. pp. 1-7., 702 (012057). ISSN 1757-8981 (Published)

Ahmad Nazrie, Mohd Nor and Kumar, Senthil (2021) The evidence of microfinance as a tool in poverty alleviation in Malaysia – A survey. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (6). 9673 -9685. ISSN 1309-6591 |. (Published)

Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and Azzuhana, Roslan and Roziana, Shahril and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Potential application of Artificial Neural Network (ANN) analysis method on Malaysian road crash data. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 95-105. ISSN 2636-9575. (Published)

Ahmad Noor Syukri, Zainal Abidin and Azzuhana, Roslan and Roziana, Shahril and Arief Hakimi, Azmi and Ahmad Shahir, Jamaludin and Nur Aini Safiah, Abdullah and Zulhaidi, Mohd Jawi and Khairil Anwar, Abu Kassim (2021) Malaysian road traffic crash data: Where do we stand now. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 88-94. ISSN 2636-9575. (Published)

Ahmad Yunus, Nasution and Mohd Ruzaimi, Mat Rejab and Ma, Quanjin and Firmansyah, Mohamad Ardy (2021) Design optimization of passenger SUV's crash box and bumper beam by using finite element method. In: IOP Conference Series: Materials Science and Engineering. International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10th-11th November 2020 , Pekan, Malaysia. pp. 1-8., 1068 (012023). ISSN 1757-899X (Published)

Ahmat, Farouq and Mohd Yusri, Mohd Yunus and Nurul Ain, Ismail (2021) Simulation solvent extraction of rare earth metal source origin from marine sediment. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-16., 641 (1). ISSN 1755-1307 (Published)

Ahmed, Abdulghani Ali and Kwan, Wendy and Kabir, M. N. and Sadiq, Ali Safaa (2021) Dynamic reciprocal authentication protocol for mobile cloud computing. IEEE Systems Journal, 15 (1). 727 -737. ISSN 1932-8184. (Published)

Ahmed, Mohammad Faisal Bin and Miah, M. Saef Ullah and Bhowmik, Abhijit and Sulaiman, Junaida (2021) Awareness to Deepfake: A resistance mechanism to Deepfake. In: 2021 International Congress of Advanced Technology and Engineering, ICOTEN 2021 , 4 - 5 July 2021 , Virtual, Online. pp. 1-5. (9493549). ISBN 978-166541224-7 (Published)

Aidil Redza, Khan and Mohd Faizal, Jamlos and Nurmadiha Osman, Osman and Muhammad Izhar, Ishak and Fatimah, Dzaharudin and You Kok, Yeow and Khairil Anuar, Khairi (2021) DSRC Technology in Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) IoT System for Intelligent Transportation System (ITS): A Review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 97-106. ISBN 978-981-33-4597-3

Aidil Redza Khan, Mohamed Amir Khan (2021) Development of collision avoidance application using internet of things (loT) technology for vehicle-to-vehicle (v2v) and vehicle-to-infrastructure (v21) communication system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Aikhuele, Daniel O. and Akinosi, Olatunji A. and Faiz, Mohd Turan (2021) A Hybrid Fuzzy Model for the performance evaluation of Biomethane gas as a renewable energy source. Process Integration and Optimization for Sustainability, 5 (4). pp. 993-1002. ISSN 2509-4246. (Published)

Aiman A., Mokaizh and Jun Haslinda, Shariffuddin (2021) Synthesis of α-alumina developed from waste aluminium using precipitation technique. In: Journal of Physics: Conference Series, The 1st International Conference on Fundamental, Applied Sciences and Technology (ICoFAST 2021) , 15-16 March 2021 , Perlis, Malaysia, & Hadhramout, Yemen. pp. 1-8., 1900 (012002). ISSN 1742-6588 (Published)

Aimi Asyiqin, Abu Kassim and Norhayati, Abdullah (2021) Sorption and thermodynamic study of nitrate removal by using Amberlite IRA 900 (AI900) resin. Materials Today: Proceedings, 41 (Part 1). pp. 102-108. ISSN 2214-7853. (Published)

Aimi Wahidah, Aminan and Siti Zulaiha, Zainol and Saiful Nizam, Tajuddin and Ramli, Aizi Nor Mazila (2021) Isolation and cloning of sesquiterpene synthases (amgs3 and amgs4) and chalcone synthase (amchs) from aquilaria malaccensis responsible for agarwood formation. Malaysian Journal of Chemistry, 23 (2). pp. 110-114. ISSN 2550-1658. (Published)

Aimi-Wahidah, A. and Rofiza, M. and Saiful-Nizam, T. and Aizi-Nor-Mazila, R. (2021) Transcriptome and chemical analysis of healthy and infected stems of aquilaria malaccensis. Journal of Tropical Forest Science, 33 (4). pp. 461-472. ISSN 0128-1283. (Published)

Ain Nadhira, Mohd Taib and Fauziah, Zainuddin and Rahmah, Mokhtar (2021) Integrating Psychology Approach into Course Advisory System Framework for Higher Education Institution. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM). 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. pp. 161-166.. ISBN 978-1-6654-1407-4 (Published)

Aina Najwa, Nadzri and Mohd Jamil, Mohamed Mokhtarudin and Wan Naimah, Wan Ab Naim and Payne, Stephen J. (2021) Simulation of decompressive craniectomy for ischaemic stroke treatment: A conceptual modeling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 2021 , 1-3 March 2021 , Virtual, Langkawi Island. pp. 303-308. (168430). ISBN 978-172814245-6 (Published)

Ainul Farhani, Ahmad Nizam (2021) Inhibition of free fatty acid formation in oil palm fruit by using buffer solution. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Sabri, Mahmud).

Ainur Munira, Rosli and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Recent Study on Hard to Machine Material – Micromilling process. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (2). pp. 445-453. ISSN 2432-5953 (Online). (Published)

Ainur Munira, Rosli and Norlida, Jamil and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali and A. R., Yusoff (2021) Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 589-597.. ISBN 978-981-15-9505-9 (Published)

Aisyah, Ibrahim and Hamdan, Daniyal and Tuty Asmawaty, Abdul Kadir and Adzhar, Kamaludin (2021) Potential Data Collections Methods for System Dynamics Modelling: A Brief Overview. International Journal of Advanced Computer Science and Applications (IJACSA), 12 (3). pp. 259-268. ISSN 2156-5570(Online). (Published)

Aisyah, Ibrahim and Tuty Asmawaty, Abdul Kadir and Hamdan, Daniyal and Adzhar, Kamaludin (2021) Components For COVID19 Outbreak Control Model: A System Dynamics Perspective. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 524-529.. ISBN 978-1-6654-1407-4 (Published)

Aisyah, Ibrahim and Tuty Asmawaty, Abdul Kadir and Hamdan, Daniyal and Adzhar, Kamaludin (2021) Overviews of Uncertainty: Concepts, Categories and Coping Strategies in Decision Making. In: International Conference on Emerging Technologies and Intelligent Systems (ICETIS 2021) , 25-26 June 2021 , The British University in Dubai, UAE (Virtual Conference). pp. 1-12.. (Published)

Aizat, Alias and Amin, A. F. M. (2021) Blast loaded steel-concrete composite slab. Journal of Mechanical Engineering and Sciences (JMES), 15 (1). 7874 -7884. ISSN 2231-8380 (online). (Published)

Aizi Nor Mazila, Ramli and Hazrulrizawati, Hamid and Farah Hanani, Zulkifli and Normaiza, Zamri and Bhuyar, Prakash and Nor Hasmaliana, Abdul Manas (2021) Physicochemical properties and tenderness analysis of bovine meat using proteolytic enzymes extracted from pineapple (Ananas comosus) and jackfruit (Artocarpus heterophyllus) by-products. Journal of Food Processing and Preservation, 45 (11). pp. 1-10. ISSN Print (1745-4549); online (0145-8892). (Published)

Aizzuddin, A. M. and Taib, M. Y. and Azmi, W. H. (2021) Investigation of pipe materials and thermal conductivity of soil on the performance of ground heat exchanger operating under Malaysia climate. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-11., 1078 (012030). ISSN 1757-899X (Published)

Ajibike, W. A. and Adeleke, A. Q. and Fazeeda, Mohamad and M.N.M., Nawi and Bamgbaded, J. A. and S. R. M., Riazi and M.F., Ahmad (2021) Validating the effects of organizational internal factors and technology orientation on environmental sustainability performance of Malaysian Construction firms. Productivity Management, 26 (1). pp. 146-173. ISSN 1868-8519. (Published)

Ajibike, W.A. and Adeleke, A. Q. and Fazeeda, Mohamad and Bamgbade, J.A. and M.N., M. Nawi and Moshood, T. D (2021) An Evaluation of environmental sustainability performance via attitudes , social responsibility, and culture: a mediated analysis. Environmental Challenges, 4 (100111). pp. 1-27. ISSN 2667-0100. (Published)

Ajibike, Waliu Adeniyi (2021) The effect of organisational internal factors and technology orientation on environmental sustainability performance of Malaysian construction firms. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Adekunle Qudus, Adeleke).

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Design and simulation of solar roof-top projects for an energy self-reliant university campus. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012013). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Ajith, Gopi and K., Sudhakar and Ngui, Wai Keng (2021) Solar PV Microgrids Implementation model: A case study of Local Self Governments in the Indian State of Kerala. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-13., 1068 (012024). ISSN 1757-899X (Published)

Ajith, Gopi and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. (2021) Comparison of normal and weather corrected performance ratio of photovoltaic solar plants in hot and cold climates. Energy for Sustainable Development, 65. pp. 53-62. ISSN 0973-0826. (Published)

Akbari, Sweeta and Nour, A. H. and Fayaz, Fahim and Noory, Valantena (2021) Iridoids of fenugreek (Trigonella-foenum-graecum L.) seed extract detected via LC-QTOF-MS analysis. Future Foods, 4 (100067). pp. 1-8. ISSN 2666-8335. (Published)

Akbari, Sweeta and Nour, Abdurahman Hamid and Rosli, Mohd Yunus and Alsaggaf, Ali Hassan Abdulrahman and Noormazlinah, Ahmad (2021) LC-QTOF-MS analysis of phenolics and saponins extracted from Aloe vera leaves via microwave technology in optimal condition. South African Journal of Botany, 139. pp. 362-373. ISSN 0254-6299. (Published)

Akhmedov, Abdulkasim and Mohd Zuki, Salleh and Rakhimov, Abdumalik (2021) The approximation of the solution of wave problems by spectral expansions connected with elliptic differential operators. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). 101 -106. ISSN 2289-7879. (Published)

Akhtar, Shamim and Muhamad Zahim, Sujod and Hussain Rizvi, Syed Sajjad (2021) A Novel Deep Learning Architecture for Data-Driven Energy Efficiency Management (D2EEM) - Systematic Survey. In: 7th International Conference on Engineering and Emerging Technologies, ICEET 2021 , 27-28 October 2021 , Istanbul, Turkey. (176217). ISBN 9781665427142 (Published)

Akhtar, Shamim and Muhamad Zahim, Sujod and Rizvi, Syed Sajjad Hussain (2021) A Hybrid Soft Computing Framework for Electrical Energy Optimization. In: 2021 6th International Multi-Topic ICT Conference (IMTIC) , 10-12 Nov. 2021 , Jamshoro & Karachi, Pakistan. (177765). ISBN 9781665482943 (Published)

Akhter, Shamima and Nurul Khairiyyah, Mohd Zain and Md., Shalauddin and Singh, Vivek Kumar and Izan Izwan, Misnon and Sharma, Rajendra Kumar and Das, Santanu and Wan Jeffrey, Basirun and Mohd. Rafie, Johan and Rajan, Jose (2021) Tri-metallic Co-Ni-Cu based metal organic framework nanostructures for the detection of an anticancer drug nilutamide. Sensors and Actuators: A Physical, 325 (112711). pp. 1-11. ISSN 0924-4247. (Published)

Al Biajawi, Mohammad Ismail Yousef and Wahppe Alkasawneh, Rufaidah and Mostafa, Sahar A. and Izwan, Johari and Rahimah, Embong and Khairunisa, Muthusamy (2021) Performance of sustainable concrete containing recycled latex gloves and silicone catheter under elevated temperature. Journal of King Saud University - Engineering Sciences. pp. 1-13. ISSN 1018-3639. (In Press / Online First) (In Press / Online First)

Al Jasmi, S. and Nur Farhayu, Ariffin and Seman, M. A. (2021) The research of blast resistant of reinforcement concrete beams in concrete structures at off-site oil and gas plant. Construction, 1 (2). pp. 85-92. ISSN 2785-8731. (Published)

Al-Aidaros, A. Z. and Masri, K. A. and Putra Jaya, Ramadhansyah and Yaacob, H. and Norhidayah, A. H. and Mohd Warid, M. N. (2021) Predication of nano-silica modified porous asphalt under dynamic creep by using finite element analysis. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012059). ISSN 1755-1315 (Published)

Al-Amshawee, S. and Mohd Yusri, Mohd Yunus (2021) A review of wastewater bacterial bio oxidation: Mechanisms, reactions, and behaviors. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 1-9. ISSN 0126-8139. (Published)

Al-Amshawee, Sajjad and Mohd Yusri, Mohd Yunus (2021) Geometry of biofilm carriers: A systematic review deciding the best shape and pore size. Groundwater for Sustainable Development, 12. pp. 1-12. ISSN 2352-801X. (Published)

Al-Amshawee, Sajjad and R. M., Yunus and Lynam, Joan G. (2021) Non-catalytic ozonation of palm oil mill effluent (POME). Chemical Engineering Research and Design, 167. pp. 169-182. ISSN 0263-8762. (Published)

Al-Hadi, Abdulsalam Khaled Abdullah and Siti Zubaidah, Ismail (2021) Developing palm oil inventory control system using Ms Excel macro. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 51-55. ISSN 2636-9575. (Published)

Al-Hameli, Bassam Abdo and Alsewari, Abdulrahman A. and Alsarem, Mohammed (2021) Prediction of Diabetes Using Hidden Naïve Bayes: Comparative Study. In: Advances on Smart and Soft Computing: Proceedings of ICACIn 2020 , 13-14 April 2020 , Faculty of Sciences Ain Chock Casablanca, Hassan II University, Morocco. pp. 223-233., 1188. ISBN 978-981-15-6048-4 (Published)

Al-Hameli, Bassam Abdo and Alsewari, Abdulrahman A. and Khubrani, Mousa and Fakhreldin, Mohammoud (2021) Accuracy and performance analysis for classification algorithms based on biomedical datasets. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 620-624.. ISBN 978-1-6654-1407-4 (Published)

Al-Jabali, Ahlam Mahmoud and Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Sharena, Mohamad Isa and Noor Amalina Nisa, Ariffin (2021) Two-phase flow of non-newtonian eyring fluid over a vertical stretched surface with temperature dependent viscosity. JP Journal of Heat and Mass Transfer, 23 (1). 57 -68. ISSN 0973-5763. (Published)

Al-Jbour, Nawzat D. and M. D. H., Beg and Jolius, Gimbun and A. K. M., Moshiul Alam (2021) Preparation and characterization of low molecular weight chitosan with different degrees of deacetylation by the acid hydrolysis method. International Journal of Applied Pharmaceutics, 13 (2). pp. 153-164. ISSN 0975-7058. (Published)

Al-Mohammad, Mohammad and Ahmad Tarmizi, Haron and Mohammad Numan, Aloko and Rahimi, A. Rahman (2021) Factors affecting BIM implementation in post-conflict low-income economies: the case of Afghanistan. Journal of Engineering, Design and Technology. pp. 1-20. ISSN 1726-0531. (Published)

Al-Saffar, Ahmed and Suryanti, Awang and Al-Saiagh, Wafaa and Al-Khaleefa, Ahmed Salih and Abed, Saad Adnan (2021) A sequential handwriting recognition model based on a dynamically configurable CRNN. Sensors, 21 (21). pp. 1-25. ISSN 1424-8220. (Published)

Al-Shakhrit, A. K. S. and Masri, K. A. and Othman, C. P. (2021) The social and economic impacts of e-hailing application in Malaysia: A review. Construction, 1 (2). pp. 40-44. ISSN 2785-8731. (Published)

Al-hokabi, Abdulmajeed and Muzamir, Hasan and Amran, Mugahed and Fediuk, Roman and Vatin, Nikolai Ivanovich and Klyuev, Sergey (2021) Improving the early properties of treated soft kaolin clay with palm oil fuel ash and gypsum. Sustainability, 13 (10910). pp. 1-18. ISSN 2071-1050. (Published)

Alam, Istiak and Forid, Md. Shaekh and Roney, Miah and Mohd F. F., Mohd Aluwi and Huq, AKM Moyeenul (2021) Qualitative dataset on UPLC-QTOF/MS tentative identification of phytochemicals from bioactive extract of Ipomoea mauritiana Jacq. Data in Brief, 35 (106839). pp. 1-4. ISSN 2352-3409. (Published)

Alam, Istiak and Forid, Md. Shaekh and Roney, Miah and Mohd Fadhlizil Fasihi, Mohd Aluwi and Huq, AKM Moyeenul (2021) Qualitative dataset on UPLC-QTOF/MS tentative identification of phytochemicals from bioactive extract of Ipomoea mauritiana Jacq. Data in Brief, 35 (106839). pp. 1-4. ISSN 2352-3409. (Published)

Alam, Md Zahangir and Shakib, Mohammed Nazmus and Islam, Minarul and Mohammad Jalal, Uddin (2021) Various risks and safety analysis to reduce fire in oil refinery plant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012028). ISSN 1757-899X (Published)

Alara, Oluwaseun Ruth and Abdurahman, N.H. and Ali, H.A. and Zain, N.M. (2021) Microwave-assisted extraction of phenolic compounds from Carica papaya leaves: An optimization study and LC-QTOF-MS analysis. Future Foods, 3 (100035). pp. 1-8. ISSN 2666-8335. (Published)

Alara, Oluwaseun Ruth and Nour, A. H. and Ukaegbu, Chinonso Ishmael (2021) Extraction of phenolic compounds: A review. Current Research in Food Science, 4. pp. 200-214. ISSN 2665-9271. (Published)

Alashwal, Basma Yahya and Bala, Mohamed Saad and Gupta, Arun and Soubam, Triveni (2021) Strategies using of Design of Experiments (DOE) techniques: In view of a review. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 1-5. ISSN 2673-0537. (Published)

Albarqouni, Yasin and Ali, Gomaa A. M. and Lee, Soon Poh and Mohd Hairul, Ab. Rahim and Algarni, H. and Chong, Kwok Feng (2021) Dual-functional single stranded deoxyribonucleic acid for graphene. Electrochimica Acta, 399 (139366). pp. 1-10. ISSN 0013-4686. (Published)

Albarqouni, Yasin M. Y. and M. Ali, Gomaa A. and Soon, Poh Lee and Rahim, Mohd-Hairul and Kwok, Feng Chong (2021) DNA-Assisted stabilization of graphene sheets and its applications as supercapacitors electrode. In: IKMPB Online Symposium 2021: Chemistry for Sustainable World , 16th January 2021 , ONLINE SYMPOSIUM. pp. 1-12., 22. ISSN 1511-2292 (Published)

Ali Abdallah, Ali Emhemed (2021) Optimal distributed generation and load shedding scheme using artificial bee colony- hill climbing algorithm considering voltage stability and losses indices. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Alia Yasmin, Nor Saidi and Nor Azuana, Ramli and Noryanti, Muhammad and Lilik Jamilatul, Awalin (2021) Power outage prediction by using logistic regression and decision tree. In: Journal of Physics: Conference Series; Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28 - 29 July 2021 , Kuantan, Pahang. pp. 1-10., 1988 (1). ISSN 1742-6596 (Published)

Aliaa, Zanurin and Nor Azmi, Hj Johari and Juliawati, Alias and Mas Ayu, Hassan and Norizah, Hj Redzuan and Sudin, Izman (2021) Research progress of sol-gel ceramic coating : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1849-1854., 48 (176050). ISSN 2214-7853 (Published)

Aljabali, Ahlam and Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Sharena, Mohamad Isa (2021) Mixed convection of non-newtonian erying powell fluid with temperature-dependent viscosity over a vertically stretched surface. Computers, Materials & Continua, 66 (1). pp. 421-435. ISSN 1546-2226. (Published)

Aljabali, Ahlam and Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Sharena, Mohamad Isa and Noor Amalina Nisa, Ariffin (2021) Analysis of convective transport of temperature-dependent viscosity for non-newtonian erying powell fluid: A numerical approach. Computers, Materials & Continua, 66 (1). pp. 675-689. ISSN 1546-2226. (Published)

Aljanabi, Mohammad and Mohd Arfian, Ismail and Ali, Ahmed Hussein (2021) Intrusion Detection Systems, Issues, Challenges, and Needs. International Journal of Computational Intelligence Systems, 14 (1). pp. 560-571. ISSN 1875-6883. (Published)

Almanifi, Omair Rashed Abdul Wareth and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Muhammad Yusri, Ismail and Anwar, P. P. Abdul Majeed (2021) The classification of heartbeat PCG signals via transfer learning. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 49-59., 730. ISBN 978-981-33-4596-6 (Published)

Almanifi, Omair Rashed Abdulwareth and Ng, Jee Kwan and Anwar P. P., Abdul Majeed (2021) The classification of FTIR plastic bag spectra via label spreading and stacking. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 70-76. ISSN 2637-0883. (Published)

Alomoush, Alaa A. and Alsewari, Abdulrahman A. and Kamal Z., Zamli and Alrosan, Ayat and Alomoush, Waleed and Alissa, Khalid (2021) Enhancing three variants of harmony search algorithm for continuous optimization problems. International Journal of Electrical and Computer Engineering (IJECE), 11 (3). pp. 2343-2349. ISSN 2088-8708. (Published)

Alsewari, Abdulrahman A. and KabashI Kathir, Sharafeldin and Saeed, Mohammed Samih (2021) BUSTRACKER: Cloud based bus tracking application. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Amalia, Zulkifli and Norfatihah, Mazuki and Ahmad Salihin, Samsudin (2021) Improvement of electrical properties of CMC-PVA doped with various contents of LiNO3 as an application for hybrid polymer electrolytes. Makara Journal of Technology, 25 (2). pp. 55-62. ISSN 2355-2786. (Published)

Aman, Sidra and Zulkhibri, Ismail and Mohd Zuki, Salleh and Khan, Ilyas (2021) Magnetohydrodynamic Flow of Casson Nanofluid in a Channel Filled with Thermophoretic Diffusion Effect and Multiple Slips. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 232-246.. ISBN 978-981-15-7309-5 (Published)

Amiir Haamzah, Mohamed Ismail and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Muhammad Amirul, Abdullah and Rabiu Muazu, Musa and Anwar P. P., Abdul Majeed (2021) The diagnosis of COVID-19 through X-ray images via transfer learning and fine-tuned dense layer on pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 19-24. ISSN 2637-0883. (Published)

Amiir Haamzah, Mohamed Ismail and Mohd Azraai, Mohd Razman and Ismail, Mohd Khairuddin and Musa, Rabiu Muazu and P.P. Abdul Majeed, Anwar (2021) The diagnosis of COVID-19 by means of transfer learning through X-ray images. In: International Conference on Control, Automation and Systems. 21st International Conference on Control, Automation and Systems, ICCAS 2021 , 12 - 15 October 2021 , Jeju. pp. 592-595., 2021-October. ISBN 978-899321521-2 (Published)

Aminaimu, Zhengxiaoming and Fernando, Yudi (2021) Psychometric instrument development of the sustainable balanced scorecard for the success of a new product development. International Journal of Productivity and Quality Management, 34 (1). pp. 33-63. ISSN 1746-6482. (Published)

Aminatul Sobirah, Zahari and Muhammad Hafiz, Mazwir and Izan Izwan, Misnon (2021) Electrospun polyvinylidene fluoride (pvdf) blended with cellulose nanocrystals (cncs) as piezoelectric material. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Aminatul Sobirah, Zahari and Muhammad Hafiz, Mazwir and Izan Izwan, Misnon (2021) Influence of molecular weight on dielectric properties and piezoelectric constant of poly(vinylidene fluoride) membranes obtained by electrospinning*). Journal of Chemistry, Technology and Polymer Processing, 66 (10). pp. 532-537. ISSN 0032-2725. (Published)

Aminatul Sobirah, Zahari and Muhammad Hafiz, Mazwir and Izan Izwan, Misnon (2021) Influence of molecular weight on the morphology and structure of Electrospun Polyvinylidene Fluoride (PVDF). Materials Science Forum, 1025. pp. 293-298. ISSN 1662-9752. (Published)

Amir Luqman, Sanusi and Nurul Khairiyyah, Mohd Zain and Izan Izwan, Misnon and Rajan, Jose (2021) Effect of Organic Linkers on Metal-Organic Frameworks Electrode Fabrication for Battery Supercapacitor Hybrid Application. Materials Science Forum, 1025. pp. 32-37. ISSN 0255-5476. (Published)

Amirah, Ya’acob and N., Zainol (2021) Utilization of central composite design in optimization of microbial growth inhibition using ananas comosus leaves juice. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan Pahang, Malaysia. pp. 1-12., 1092 (012087). ISSN 1757-899X (Published)

Amirul Hakim, Sufian and Tan, Zi Xun and Mohd Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Muhd Razali (2021) Study on tire tread design effect onto Tire-road contact behavior through FEM. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 893-902.. ISBN 978-981-15-9504-2 (Print) ; 978-981-15-9505-9 (Online) (Published)

Amizatulhani, Abdullah and Nurmazuria, Mazelan and Mohd Yuhyi, Mohd Tadza and Rahisham, Abd Rahman (2021) The use of gypsum and waste gypsum for electrical grounding backfill. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Gambang Campus, Kuantan, Pahang, Malaysia. pp. 1213-1226., 666. ISBN 978-981-15-5280-9 (Published)

Ananthan, S. P. V. and Ahmad, N. and Noor, S. H. and Mimi Sakinah, A. M. and Alias, S. and Hamid, H. and Mohammed, M. and Romli, A. (2021) Formulation of plant nutrient with synbiotic enhancement. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (2). pp. 11-14. ISSN 0126-8139. (Published)

Anat Anaqie, Zahidy (2021) Critical success factors for corporate social responsibility adoption in the Malaysian construction sector: a delphi study. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad, Fazeeda).

Ang, Fuk Chen (2021) Evaluation of combustion characteristics, performance and exhaust emission for diesel fuel with various type nano particle blends. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Anis Aniza, Awi and Puteri Fadzline, Muhamad Tamyez and Nurhaizan, Mohd Zainudin and Siti Aisyah, Panatik (2021) Antecedents and preventions of problematic internet use: A systematic literature review. In: 2nd International Conference Of Psychology Studies (ICPsyche 2021) , 24 -25 July 2021 , Virtual Conference. pp. 167-173.. ISBN 9789897585807 (Submitted) (Submitted)

Anis Naema Atiyah, Rafai and Noraziah, Adzhar and Nor Izzati, Jaini (2021) A review: On path planning optimization criteria and mobile robot navigation. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28 - 29 July 2021 , Kuantan, Virtual. pp. 1-8., 1988 (012036). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Anthony, Bokolo Jnr. and Adzhar, Kamaludin and Awanis, Romli (2021) Predicting academic staffs behaviour intention and actual use of blended learning in higher education: Model development and validation. Technology, Knowledge and Learning. pp. 1-47. ISSN 2211-1662. (Published)

Anwar I., Ramadhan and Azmi, Wan H. and Rizalman, Mamat (2021) Stability and thermal conductivity of tri-hybrid nanofluids for high concentration in water-ethylene glycol (60:40). Nanoscience and Nanotechnology - Asia, 11 (4). pp. 1-11. ISSN 2210 - 6812. (Published)

Anwar Ilmar, Ramadhan and Azmi, W. H. and R., Mamat (2021) Experimental investigation of thermo-physical properties of tri-hybrid nanoparticles in water-ethylene glycol mixture. Walailak Journal of Science and Technology, 18 (8). pp. 1-15. ISSN 1686-3933. (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2021) Morphological changes of ZnO nanostructures upon addition of Trisodium Citrate (Na3C6H5O7) at different reaction temperatures. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 18-22. ISSN 2636-9575. (Published)

Aqilah, Kamaruzaman and Nurul Akmal, Che Lah (2021) Morphological changes of ZnO nanostructures upon addition of tannic acid. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 23-26. ISSN 2636-9575. (Published)

Arafat, N.H.M. and Pramanik, Md Ileas and Abu Jafar, Md Muzahid and Lu, Bibo and Jahan, Sumaiya and Murad, Saydul Akbar (2021) A conceptual anonymity model to ensure privacy for sensitive network data. In: 2021 Emerging Technology in Computing, Communication and Electronics, ETCCE 2021. 2021 Emerging Technology in Computing, Communication and Electronics, ETCCE 2021 , 21 - 23 December 2021 , Dhaka. pp. 1-7.. ISBN 978-166548364-3 (Published)

Ashaa, Supramaniam and Muhammad Aizzat, Zakaria and Kunjunni, Baarath and Mohamad Heerwan, Peeie and Ahmad Fakhri, Ab. Nasir and Muhammad Izhar, Ishak (2021) Estimation of electric vehicle turning radius through machine learning for roundabout cornering. In: 19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021 , 23-25 November 2021 , Kota Kinabalu, Sabah. 329 -332.. ISSN 2643-2447 ISBN 978-1-6654-0193-7 (Published)

Ashwindran, S. N. and Azizuddin, Abd Aziz and Oumer, A. N. and Muhamad Zuhairi, Sulaiman (2021) A review on the prospect of wind power as an alternative source of energy in Malaysia. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-17., 1078 (012017). ISSN 1757-899X (Published)

Asri, M. N. A. M. and Abdullah, N.A.Z. and M. S. M., Sani (2021) The effect of modal properties of crash box structures with trigger mechanisms towards the crashworthiness by using finite element analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8459 -8468. ISSN 2231-8380 (online). (Published)

Athirah, B. and Nurul Shahida, M. S. (2021) Aircraft noise exposure and effects on the health of nearby residents: a review. In: Human Engineering Symposium, HUMENS 2021 , 22 February 2021 - 22 February 2021 , Virtual Online. pp. 361-378.. ISSN 21954356 ISBN 978-981164114-5 (In Press / Online First) (In Press / Online First)

Athirah, B. and Nurul Shahida, Mohd Shalahim (2021) Effects of aircraft noise on residents nearby a Malaysian airport. Materials Science and Engineering, 1068 (012010). pp. 1-17. ISSN 1757-899X. (Published)

Athirah, Yusof and Nurul Shahida, M. S. (2021) Prevalence of Musculoskeletal Discomfort Among Workers in a Medical Manufacturing Facility. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). pp. 8687-8694. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Atik, Faysal and Adhreena, M S N A and Vorathin, E. and Hafizi, Z. M. and Ngui, W K (2021) Leak diagnosis of pipeline based on empirical mode decomposition and support vector machine. IOP Conf. Series: Materials Science and Engineering, 1078 (1). pp. 1-9. ISSN 1757-899X (online); 1757-8981 (Print). (Published)

Attili, Ramkiran and Vo, Dai-Viet N. and Mohd Sabri, Mahmud (2021) Syngas production from ethanol dry reforming using Cu-based perovskite catalysts promoted with rare earth metals. International Journal of Hydrogen Energy, 46 (48). pp. 24845-24854. ISSN 0360-3199. (Published)

Ayasrah, Omar and Faiz, Mohd Turan (2021) Multi-Criteria Decision-Making Model using Intuitionistic Fuzzy Entropy and Variable Weight Theory. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 18-26. ISSN 2637-0883. (Published)

Ayasrah, Omar and Faiz, Mohd Turan (2021) A Review of Multi-criteria Decision-Making Methods Using Application of Variable Weight Theory and IF-TOPSIS-EF. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, pp. 13-24. ISBN 978-981-15-9505-9

Azad, Saiful and Amin Salem, Saleh Bllagdham and Mahmud, Mufti and Kaiser, M. Shamim and Miah, Md Saef Ullah (2021) A behavioral trust model for internet of healthcare things using an improved FP-growth algorithm and Naïve Bayes classifier. In: 2021 3rd International Conference on Sustainable Technologies for Industry 4.0, STI 2021. 3rd International Conference on Sustainable Technologies for Industry 4.0, STI 2021 , 18 - 19 December 2021 , Dhaka. pp. 1-6.. ISBN 978-166540009-1 (Published)

Azahar, Mohd Iskandar Putra and Irawan, Addie (2021) Enhancing precision on pneumatic actuator positioning using cascaded finite-time prescribed performance control. In: 2021 11th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2021) , 27-28 August 2021 , Penang, Malaysia. 131 -136.. ISBN 978-1-6654-1281-0 (Published)

Azamuddin, Ab. Rahman (2021) Energy efficient in cluster head and relay node selection for wireless sensor networks. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Nizam, Mohammad Kahar).

Azed, M. A. and Doh, Shu Ing (2021) Properties of concrete containing microwaved sewage sludge ash. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8469 -8479. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Aziz, N. D. and Ishak, M. F. and Omardin, M. A. and Zulkiple, A. and Mohamed, Y. (2021) Sales expense strategies for competitive pricing of industrial building system (IBS) components. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-10., 641 (012015Intern). ISSN 1755-1307 (Published)

Azizan, Azit and Wan Khairul Anuar, Wan Abd Manan and Mazita, Mokhtar and Nisa Farzana, . and Chee, Wei Ming (2021) Digital marketing strategies to improve business performance of Malaysia SMEs. In: 2nd Langkawi International Conference on Multi-Disciplinary Research 2021 (LICM2021) , 27 Dec 2021 , Bayview Hotel, Langkawi. pp. 1-30.. ISSN 2682-8359 (Submitted) (Submitted)

Azizul Qayyum, Basri (2021) Integrated single minute exchange of die (ismed) approach to improve tandem press line operation output in automotive industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Azizul Qayyum, Basri and N. M. Zuki, N. M. and Nelfiyanti, Nelfiyanti and Yusrizal, Yusoof (2021) SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 8895-8906. ISSN 1985-9325(Print); 2180-1606 (Online). (Published)

Azlee, Zabidi and Mohd Izham, Mohd Jaya and Wan Isni Sofiah, Wan Din and Hasliza, Abu Hassan and Ihsan, Mohd Yassin (2021) Non-Linear Autoregressive with exogenous input (Narx) chiller plant prediction model. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan. pp. 1-6.. ISBN 978-1-6654-1407-4 (Published)

Azlina, Ismail and Intan Suhana, Mohd Razelan and Lydia, Mohd Yusof and Adnan, Zulkiple and Khairil Azman, Masri (2021) An overview of pavement maintenance management strategies in Malaysia. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (012042). ISSN 1755-1307 (Published)

Azmana, Motia and Syed, Mahmood and Hillese, Ayah Rebhi and Rahman, Azizur and Mohd Azmir, Arifin and Ahmed, Shakeeb (2021) A review on chitosan and chitosan-based bionanocomposites: Promising material for combatting global issues and its applications. International Journal of Biological Macromolecules, 185. pp. 832-848. ISSN 0141-8130. (Published)

Azmi, Fatin Farisha Alia and Muzakir, Saifful K. and Kadir, Mohd Fakhrul Zamani and Aziz, Shujahadeen B. (2021) The effect of number of vacuum thermal evaporation cycles to the optoelectronic and morphological properties of ZnO. Malaysian Journal of Microscopy, 17 (1). 56 -68. ISSN 1823-7010. (Published)

Azra Shakira, Hassan and Nurul Huda, Abu Bakar (2021) Structural, optical and morphological properties of pure and silver doped zinc oxide thin films by attuning the deposition layer. In: Materials Today: Proceedings. 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan. pp. 1376-1380., 51. ISSN 2214-7853 (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M A, Male (2021) Comparison of missing rainfall data treatment analysis at Kenyir Lake. IOP Conference Series: Materials Science and Engineering, 1144. pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M. A., Malek (2021) Analysis of Linear Scaling Method in Downscaling Precipitation and Temperature. Water Resources Management. pp. 1-9. ISSN 0920-4741 (print); 1573-1650 (online). (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and M. A., Malek and Faizah, Che Ros (2021) Analysis of Malaysia electricity demand and generation by 2040. In: IOP Conference Series: Earth and Environmental Science, 4th International Conference on Science and Technology Applications in Climate Change , 1-2 July 2021 , Universiti Kebangsaan Malaysia (UKM). pp. 1-10., 880 (012050). ISSN 1755-1315 (Published)

Azreen Harina, Azman and Nurul Nadrah Aqilah, Tukimat and Male, M.A. (2021) Climate change impacts on hydropower generation at Kenyir Lake. Journal of Engineering Science and Technology, 16 (2). pp. 1287-1298. ISSN ISSN: 1823-4690. (Published)

Azrie, Salleh and Eh Phon, Danakorn Nincarean and Ferda, Ernawan and Ismail, Ahmad Yusuf and Adi, Prajanto Wahyu (2021) Teacher's ICT skills and readiness of integrating augmented reality in education. In: Proceedings - International Conference on Informatics and Computational Sciences. 5th International Conference on Informatics and Computational Sciences, ICICos 2021 , 24 - 25 November 2021 , Semarang. pp. 205-209., Volume 2021-November. ISSN 2767-7087 ISBN 978-166543807-0 (Published)

Azrin, Abdul Aziz and Muhammad Yusri, Ismail and K., Sudhakar and C W, Mohd Nor and A, Zainal and Anwar, P. P. Abdul Majeed (2021) An overview of the spark plug engine profile in a spark ignition engine. IOP Conf. Series: Materials Science and Engineering, 1092 (012030). pp. 1-12. ISSN 1757-8981 (Print); 1757-899X (Online). (Published)

B

B. A., Solahuddin and F. M., Yahaya (2021) Inclusion of Waste Paper on Concrete Properties: A Review. Civil Engineering Journal, 7 (Special). pp. 94-113. ISSN 2476-3055. (Published)

Badraddin, A. K. and Abdul Rahimi, Abdul Rahman and Almutairi, Saud and Esa, Muneera (2021) Main challenges to concrete recycling in practice. Sustainability, 13 (19). pp. 1-15. ISSN 2071-1050. (Published)

Badraddin, A. K. and Abdul Rahimi, Abdul Rahman and Zahrizan, Zakaria and Muzamir, Hasan (2021) Factors Affecting Concrete Recycling Adoption in the Construction Projects. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. pp. 1-10., 641 (012018). (Published)

Bai, Sandhia and Amirruddin, Abdul Kadir and Pandey, A. K. and Samykano, M. and Muhammad Shakeel, Ahmad and Sharma, Kamal and Tyagi, V. V. (2021) Advancements in the development of various types of dye-sensitized solar cells: A comparative review. Energy Engineering, 118 (4). 737 -759. ISSN 0199-8595. (Published)

Bakiss Hiyana, Abu Bakar and Hamzah, Ahmad (2021) H∞ filter with fuzzy logic estimation to refrain finite escape time. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 978-981. ISBN 978-981-33-4597-3

Bari, Bifta Sama and Islam, Md Nahidul and Rashid, Mamunur and Hasan, Md Jahid and Mohd Azraai, Mohd Razman and Musa, Rabiu Muazu and Ahmad Fakhri, Ab. Nasir and Majeed, Anwar P.P. Abdul (2021) A real-time approach of diagnosing rice leaf disease using deep learning-based faster R-CNN framework. PeerJ Computer Science, 7 (e432). pp. 1-27. ISSN 2376-5992. (Published)

Barmon, Liton Chandra and Sikder, Md. Belal Hossain and Ahmad, Iftekhar and Shourove, Jahid Hasan and Rashid, Shah Samiur and Aizi Nor Mazila, Ramli (2021) Gelatin extraction from the Bangladeshi pangas catfish (pangasius pangasius) waste and comparative study of their physicochemical properties with a commercial gelatin. International Journal of Engineering Technology And Sciences (IJETS), 7 (2). pp. 13-23. ISSN 2289-697X. (Published)

Basem, Elarbe and Ibrahim, Elganidi and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Shamala Vijaya, Kumar (2021) Application of full factorial design to screen the factors infuencing the wax deposition of Malaysian crude oil. Journal of Petroleum Exploration and Production Technology, 193. pp. 1-11. ISSN 2190-0566. (Published)

Beng, Wei Chong and Rokiah, Othman and Putra Jaya, Ramadhansyah and Xiaofeng, Li and Mohd Rosli, Mohd Hasan and Mohd Mustafa Al Bakri, Abdullah (2021) Meta-analysis of studies on eggshell concrete using mixed regression and response surface methodology. Journal of King Saud University - Engineering Sciences. pp. 1-20. ISSN 1018-3639. (In Press / Online First) (In Press / Online First)

Benjunior, Bindamin (2021) Characterization of wrought aluminium feedstock billet produced by semisolid metal processing route. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Asnul Hadi).

Benziane, Ali and Suryanti, Awang and Lebcir, Mohamed (2021) Development and implementation of a video watermarking method based on DCT transform. International Arab Journal of Information Technology, 18 (2). pp. 140-147. ISSN 1683-3198. (Published)

Bhuyar, P. and Rahim, M. H. A. and Maniam, G. P. and Govindan, N. (2021) Isolation and characterization of bioactive compounds in medicinal plant centella asiatica and study the effects on fungal activities. Journal of Microbiology Biotechnology and Food Sciences, 10 (4). pp. 631-635. ISSN 1338-5178. (Published)

Bhuyar, P. and Sundararaju, Sathyavathi and Mohd Hasbi, Ab. Rahim and Unpaprom, Yuwalee and Gaanty Pragas, Maniam and Natanamurugaraj, Govindan (2021) Antioxidative study of polysaccharides extracted from red (Kappaphycus alvarezii), green (Kappaphycus striatus) and brown (Padina gymnospora) marine macroalgae/seaweed. SN Applied Sciences, 3 (4). pp. 1-9. ISSN 2523-3971. (Published)

Bhuyar, Prakash and Farez, Fakhrul and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and Natanamurugaraj, Govindan (2021) Removal of nitrogen and phosphorus from agro-industrial wastewater by using microalgae collected from coastal region of peninsular Malaysia. African Journal of Biological Sciences, 3 (1). pp. 1-9. ISSN 2663-2187. (Published)

Bhuyar, Prakash and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2021) Isolation and characterization of bioactive compounds in medicinal plant centella asiatica and study the effects on fungal activities. Journal of Microbiology Biotechnology and Food Sciences, 10 (4). 631 -635. ISSN 1338-5178. (Published)

Bhuyar, Prakash and Sundararaju, Sathyavathi and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2021) Enhanced productivity of lipid extraction by urea stress conditions on marine microalgae Coelastrum sp. for improved biodiesel production. Bioresource Technology Reports, 15 (100696). pp. 1-6. ISSN 2589-014X. (Published)

Bing, Kho Yap and Rahimah, Jusoh and Mohd Zuki, Salleh and Zulkhibri, Ismail and Mohd Hisyam, Ariff (2021) Influence of viscous dissipation on the boundary layer flow of Cu-Al2O3 hybrid nanofluid. JP Journal of Heat and Mass Transfer, 23 (2). pp. 235-246. ISSN 0973-5763. (Published)

Bryan Andrew, Balasan (2021) Comparative study of bi-2223 synthesised via electrospinning and coprecipitation methods. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazwir, Muhammad Hafiz).

Budiea, A. M. A. and Sek, W. Z. and Mokhatar, S. N. and Khairunisa, Muthusamy and Yusoff, A. R. M. (2021) Structural performance assessment of high strength concrete containing spent garnet under three point bending test. In: IOP Conference Series: Materials Science and Engineering, 3rd International Symposium on Civil and Environmental Engineering (ISCEE 2020) , 1 - 2 December 2020 , Batu Pahat, Johor, Malaysia. pp. 1-8., 1144 (012018). ISSN 1757-899X (Published)

C

Chaitanya Reddy, Chilakamarry and Mimi Sakinah, A. M. and Zularisam, A. W. and Pandey, Ashok (2021) Glycerol waste to value added products and its potential applications. Systems Microbiology and Biomanufacturing, 1 (2). pp. 1-19. ISSN 2662-7663. (Published)

Che Zafirah, Rosly and Ummu Kulthum, Jamaludin and Khalijah, Khalid and Fatanah, Suhaimi and Normy Norfiza, Abdul Razak and Mohd Basri, Mat Nor and Azrina, Md Ralib (2021) Study on the enhancement of Malaysian ICU centre and introduction of STAR performance. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 63-73.. ISSN 2195-4356 ISBN 9789811641145 (Published)

Chen, Wenhao and Ahmed, Md Manjur and Wan Isni Sofiah, Wan Din and Nor Ashidi, Mat Isa and Ebrahim, Nader Ale and Hai, Tao (2021) A bibliometric statistical analysis of the fuzzy inference system - based classifiers. IEEE Access, 9. 77811 -77829. ISSN 2169-3536. (Published)

Cheng, Wong See and Rassem, Taha Hussein (2021) 3D game-based learning music theory with augmented reality (AR). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Chilakamarry, Chaitanya Reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Pandey, Ashok and N. Vo, Dai-Viet (2021) Technological perspectives for utilisation of waste glycerol for the production of biofuels: A review. Environmental Technology & Innovation, 24 (101902). pp. 1-23. ISSN 2352-1864. (Published)

Chilakamarry, Chaitanya Reddy and Syed, Mahmood and Siti Nadiah, Mohd Saffe and Mohd Azmir, Arifn and Gupta, Arun and Mohamed Yacin, Sikkandar and S Sabarunisha, Begum and Narasaiah, Boya (2021) Extraction and application of keratin from natural resources: a review. 3 Biotech, 11 (220). pp. 1-12. ISSN 2190-572X (print); 2190-5738 (online). (Published)

Chilakamarry, Chaitanya reddy and Mimi Sakinah, A. M. and Zularisam, A. W. and Sirohi, Ranjna and Khilji, Irshad Ahamad and Reddy, Venugopal Jayarama and Pandey, Ashok (2021) Bioconversion of Glycerol into Biofuels—Opportunities and Challenges. BioEnergy Research. pp. 1-17. ISSN 1939-1234. (Published)

Chong, B. W. and Rokiah, Othman and Putra Jaya, Ramadhansyah and Doh, Shu Ing and Li, Xiaofeng (2021) Mathematical modelling of concrete compressive strength with waste tire rubber as fine aggregate. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8344 -8355. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Chong, Beng Wei (2021) Properties of concrete incorporating eggshell as partial cement replacement with tire crumb as sand replacement. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rokiah, Othman).

Chong, Chi Cheng and Cheng, Yoke Wang and Mahadi, Bahari and Teh, Lee Peng and Sumaiya, Zainal Abidin and Herma Dina, Setiabudi (2021) Development of nanosilica-based catalyst for syngas production via CO2 reforming of CH4 : A review. International Journal of Hydrogen Energy, 46 (48). pp. 24687-24708. ISSN 0360-3199. (Published)

Christina Andin, Nur Qistina Abdullah and Rohana, Hamzah and Mohd Shafiq, Abd Jabar and Mapjabil, Jabil and Muhamad Suhaimi, Taat (2021) Thinking Skills in Education: What Is the Alternative Approach to Educate Good Decision Makers? International Journal of Latest Research in Humanities and Social Science (IJLRHSS), 4 (10). pp. 54-60. (Published)

Chu, K. M. and Abdul Halim, Abdul Razik (2021) Optimal biomass transportation model. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 23-31. ISSN 0126-8139. (Published)

Chua, Wei Ming and Khairul Fikri, Muhammad (2021) Development of walking robot using compliance mechanism. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 49-56. ISSN 2637-0883. (Published)

Cionita, Tezara and Siregar, Januar Parlaungan and Mohammad Hazim, Mohamad Hamdan and Rihayat, Teuku and Bachtiar, Dandi and Fitriyana, Deni Fajar and Prayitno, P. (2021) Influence of layering sequences on tensile properties of hybrid woven Jute/Ramie fibre reinforced polyester composites. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1836-1841., 48. ISSN 2214-7853 (Published)

Cui Ming, Ng and Putra Jaya, Ramadhansyah and Haryati, Awang and Khairil Azman, Masri and Noram Irwan, Ramli (2021) Eggshell bitumen – Alternative binder for road construction. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

D

Dar, Qamar Uz Zaman and Renhai, Pu and Sajid, Zulqarnain and Mehmood, Mubashir and Abdul, Wahab (2021) The provenance and tectonic settings of the greywacke member of the late neoproterozoic hazara formation lesser himalayas, northern pakistan: Evidence from geochemistry and petrography. Sains Malaysiana, 50 (12). pp. 3505-3522. ISSN 0126-6039. (Published)

Dara, Affydah and A. N. M., Rose and M. F. F., Ab Rashid and N. M. Z., Nik Mohamed (2021) Review of lean manufacturing with IR4.0 in automotive industry. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-8., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Dayangku Noorfazidah, Awang Sh'ri and Zahiruddeen Salam, Zahari and Yamamoto, Akiko (2021) Effect of ECAP die angle on mechanical properties and biocompatibility of SS316L. Metals, 11 (10). pp. 1-10. ISSN 2075-4701. (Published)

Devarajan, Ramasamy and Sandhya, Madderla and Kumaran, Kadirgama and Mahendran, Samykano and Sudhakar, Kumarasamy and Md. Mustafizur, Rahman and Wan Sharuzi, Wan Harun (2021) High heat transfer using hybrid engine coolant. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Durrani, Shaheer Shaida and Abu Zaharin, Ahmad and Bakri, Hassan and Khan, Atif Sardar and Nawaz, Asif and Jan, Naveed and Ali Khan, Rehan and Tariq, Rohi and Shah, Ahmed Ali and Bashir, Tariq and Khan, Zia Ullah and Ahmed, Sheeraz (2021) An efficient color LED driver based on self-configuration current mirror circuit. International Journal of Advanced Computer Science and Applications (IJACSA), 12 (2). 347 -356. ISSN 2158-107X ; 2156-5570(Online). (Published)

Durrani Aimi, Abdul Malik and Yuhani, Yusof and Ku Muhammad Naim, Ku Khalif (2021) A view of MCDM application in education. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28 - 29 July 2021 , Kuantan, Virtual. pp. 1-20., 1988 (01206328th). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

E

Edriyana, Abd Aziz and S. N., Moni and Noraini, Yussof (2021) Blue Water Footrpint- Industrial Water Consumption Nexus: A Case of Water Supply for Industrial Activities in Semambu Water Treatment Plant. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-10., 1092 (012045). ISSN 1757-899X (Published)

Ee, Ken-ji and Ahmad Fakhri, Ab. Nasir and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Nur Hafieza, Ismail (2021) The animal classification: An evaluation of different transfer learning pipeline. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 27-31. ISSN 2637-0883. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norhayati, Abdullah and Kamal, Yusoh and Norida, Ridzuan (2021) Optimization and modeling of reactive conditions for free radical solution polymerization of SA-co-BA copolymer based on the yield using response surface methodology. Malaysian Journal of Fundamental and Applied Sciences, 17 (1). pp. 50-55. ISSN 2289-599x. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijaya Kumar, Shamala (2021) Application of full factorial design to screen the factors influencing the wax deposition of Malaysian crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1829-1839. ISSN 2190-0558. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Kamal, Yusoh and Norhayati, Abdullah and Vijayakumar, Shamala (2021) Synthesis, characterization and evaluation of stearyl acrylate-co-behenyl acrylate copolymer as a pour point depressant of waxy crude oil. Journal of Petroleum Exploration and Production Technology, 12. pp. 1811-1828. ISSN 2190-0558. (Published)

Elarbe, Basem and Elganidi, Ibrahim and Norida, Ridzuan and Norhayati, Abdullah and Kamal, Yusoh (2021) Influence of poly (stearyl acrylate co-behenyl acrylate) as flow improvers on the viscosity reduction of Malaysian crude oil. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 201-210., 42 (1). ISSN 2214-7853 (Published)

Elarbe, Basem and Elganidi, Ibrahim and Ridzuan, N. and Abdullah, N. and Kamal, Y. (2021) Paraffin wax deposition and its remediation methods on crude oil pipelines: A systematic review. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 6-34. ISSN 2673-0537. (Published)

Elganidi, I. and Elarbe, B. and Ridzuan, N. and Abdullah, N. (2021) Optimisation of reaction parameters for a novel polymeric additives as flow improvers of crude oil using response surface methodology. Journal of Petroleum Exploration and Production Technology, 12 (2). 437 -449. ISSN 2190-0558. (Published)

Elganidi, Ibrahim and Elarbe, Basem and Norida, Ridzuan and Norhayati, Abdullah (2021) A review on wax deposition issue and its impact on the operational factors in the crude oil pipeline. Malaysian Journal of Fundamental and Applied Sciences, 17 (1). pp. 44-49. ISSN 2289-5981. (Published)

Elghdban, Mohamed Ghayth and Nurhidayah, Azmy and Adnan, Zulkiple and Al-Sharafi, Mohammed A. (2021) A systematic review of the technological factors affecting the adoption of advanced IT with specific emphasis on building information modeling. In: Recent Advances in Intelligent Systems and Smart Applications. Studies in Systems, Decision and Control, 295 . Springer Nature, Switzerland AG, pp. 29-42. ISBN 978-3-030-47411-9

Elkbuli, Mohamed O. and Adnan, Zulkiple (2021) The influence of managerial communication skills on project risk management practices in the Libyan oil and gas industry. In: Proceedings of The 3rd International Conference on Economics, Entrepreneurship and Management 2021 (ICEEM 2021). The 3rd International Conference On Economics, Entrepreneurship And Management 2021 (ICEEM2021) , 28 February 2021 , Virtual. pp. 1-20.. ISBN 9789671731321 (Published)

Elmutasim, Elsayed Imadeldin and Izzeldin Ibrahim, Mohamed Abdelaziz (2021) A novel intervention to enhance transoceanic fiber effectiveness through advanced QX 5252 CMOS driver. In: SIST 2021 - 2021 IEEE International Conference on Smart Information Systems and Technologies. 2021 IEEE International Conference on Smart Information Systems and Technologies, SIST 2021 , 28 - 30 April 2021 , Nur-Sultan. pp. 1-5. (9465889). ISBN 978-172817470-9 (Published)

Elmutasim, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz (2021) Examination rain and fog attenuation for path loss prediction in millimeter wave range. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS 2019). Lecture Notes in Electrical Engineering; 11th National Technical Symposium on Unmanned System Technology, NUSYS 2019 , 2 - 3 December 2019 , Kuantan, Malaysia. 935 -946., 666 (242089). ISSN 1876-1100 ISBN 978-981155280-9 (Published)

Elmutasima, Imadeldin Elsayed and Izzeldin Ibrahim, Mohamed Abdelaziz (2021) Comparison of the self-piloting constructive and destructive interference in 7 and 23 GHz band over the seawater surface. In: SIST 2021 - 2021 IEEE International Conference on Smart Information Systems and Technologies. 2021 IEEE International Conference on Smart Information Systems and Technologies, SIST 2021 , 28 - 30 April 2021 , Nur-Sultan. pp. 1-4. (9465895). ISBN 978-172817470-9 (Published)

Epin, Vorathin (2021) Accuracy improvement of rubber-based diaphragm fibre bragg grating pressure sensors. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Hafizi, Zohari,).

Etdal, Bakhiet (2021) Biomineralization of hydroxyethyl cellulose/sodium alginate impregnated with cellulose nanocrystals by using surface modification technique. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Zulkifli, Farah Hanani).

Ezahan Hilmi, Zakaria and Mohd Azraai, Mohd Razman and Jessnor Arif, Mat Jizat and Ismail, Mohd Khairuddin and Zelina Zaiton, Ibrahim and Anwar, P. P. Abdul Majeed (2021) Time-series classification vegetables in detecting growth rate using machine learning. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 1-5. ISSN 2637-0883. (Published)

F

F., Khudzari and R. A., Rahman and S. K., Ayer (2021) Factors affecting the adoption of emerging technologies in the Malaysian construction industry. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-11., 641 (012006). ISSN 1755-1307 (Published)

F., Wasbari and R. A., Bakar and Gan, L. M. and M. A., Salim and N. A., Hamid and Herawan, S. G. (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14 (Special Issues). pp. 413-428. ISSN 1997-4434. (Published)

Fadhl, Hujainah and Rohani, Abu Bakar and Nasser, Abdullah B. and Al-haimi, Basheer and Kamal Z., Zamli (2021) SRPTackle: a semi-automated requirements prioritisation technique for scalable requirements of software system projects. Information and Software Technology, 131 (106501). pp. 1-15. ISSN 0950-5849. (Published)

Fadhlyya Arawaney, Abdul Ghani (2021) Mathematical model for wave impact on vertical wall with multiple bottom-mounted baffles. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nor Aida Zuraimi, Md Noar).

Faiz, Azizul and Haziman, Zakaria and Diyana, Kamarudin and Nur Kamaliah, Amer (2021) ZENHACHI- Modern and safe stingless bee nest for housing area. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Farah Ameelia, Mohammad and Siti Zubaidah, Ismail (2021) Product-Service System (PSS) for inventory control: Analysis using Delmia QUEST simulation modelling based on the production line. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 527-536.. ISBN 978-981-15-9505-9 (Published)

Farah Hafidzah, . and Mohd Bijarimi, Mat Piah and Waleed Alhadadi, . and Suriyati, Saleh and Mohammad Norazmi, . and Erna Normaya, . (2021) Statistical study on the interaction factors of polypropylene-graft-maleic anhydride (PP-G-MA) with graphene nanoplatelet (GNP) at various poly(lactic acid)/polypropylene (PLA/PP) blends ratio. Indonesian Journal of Chemistry, 21 (1). pp. 234-242. ISSN 1411-9420 (Print); 2460-1578 (Online). (Published)

Farah Hafidzah, Ahmad and Nurhamizah, Ibrahim and Mohd Sabri, Mahmud and Ali, Waleed and Mohd Bijarimi, Mat Piah and Suriyati, Saleh and Said, Nurdin (2021) Microwave irradiation optimization for efficient lignin removal from cocoa shell waste using alkali. IIUM Engineering Journal, 22 (2). 21 -30. ISSN 1511-788X. (Published)

Faten, Ahmad Al-Btoush (2021) Effective strategies dealing with construction cost overruns: a study in Jordan. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fathie, Ahmad Zakil and Lim, Hui Xuan and Norafira, Zaman and Nurul Idayu, Alan and Nurul Adila Aida, Salahutheen and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha (2021) Growth performance and mineral analysis of Pleurotus ostreatus from various agricultural wastes mixed with rubber tree sawdust in Malaysia. Bioresource Technology Reports, 17 (100873). pp. 1-8. ISSN 2589-014X. (Published)

Fathie, Ahmad Zakila and Mohd Shafiq, Mohd Sueb and Ruzinah, Isha and Siti Hajar, Kamaluddin (2021) Efficiency of charcoal as supporting growth material in Pleurotus Ostreatus Mushroom Cultivation on various agricultural wastes mixed with rubber tree sawdust (SR) (in-Press). Chemical Engineering Transactions, 89. pp. 415-420. ISSN 2283-9216. (In Press / Online First) (In Press / Online First)

Fatimah, Abdul Rashid (2021) Kesediaan dan kepenggunaan virtual learning environment dalam pengajaran dan pembelajaran di negeri Pahang. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Hilmi, Mat Said).

Fatin Umi Syahirah, Md Saad and Nurjannah, Salim and Rasidi, Roslan (2021) Physical and mechanical properties of kenaf/seaweed reinforced polypropylene composite. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1372-1375., 51. ISSN 2214-7853 (Published)

Fatkhurrahman, Manani and Siti Zubaidah, Ismail (2021) Enhancing palm oil inventory control support analytic tools. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 46-50. ISSN 2636-9575. (Published)

Fatma, Ali Lghzeel (2021) The cross-linguistic influence of arabic on the english passive voice. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Fauzi, M. A. and Kasim, Nur Muneerah and Paiman, Norazha (2021) Fear of missing out among adolescents: Formulating big five personality traits to smartphone addiction. International Journal of E-Services and Mobile Applications, 13 (4). pp. 60-76. ISSN 1941-627X. (Published)

Faysal, Atik and Ngui, Wai Keng and Lim, M. H. (2021) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Nature Singapore, Singapore, pp. 605-615. ISBN 978-981-33-4596-6 (Print) 978-981-33-4596-6 (Online)

Fazilah, Abdul Aziz and Z., Ghazalli and N. M. Zuki, N. M. (2021) Development of a Web-Based System for Assessing and Prioritizing the Critical Ergonomics Risk Factors: A Case Study in a Local Automotive Vehicle Manufacturer. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 471-484.. ISBN 978-981-15-9505-9 (Published)

Fazliana, Fauzun (2021) Laser cladding of tool steel for grain boundary stability. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Syarifah Nur Aqida, Syed Ahmad).

Fernando, Yudi and Mohd Ridzuan, Darun and Al-haimi, Basheer and Daing Nasir, Ibrahim and Tieman, Marco and Fazeeda, Mohamad (2021) Role of Smart Contracts in Halal Supply Chain Management. In: Encyclopedia of Organizational Knowledge, Administration, and Technology. IGI Global, pp. 2497-2504. ISBN 9781799834748

Fernando, Yudi and Raidah, Saedan and Muhammad Shabir, Shaharudin and Mohamed, Ahmed (2021) Integrity in halal food supply chain towards the society 5.0. Journal of Governance & Integrity, 4 (2). pp. 103-114. ISSN 2600-7479. (Published)

Fernando, Yudi and Shaharudin, Muhammad Shabir and Herwin, Ika Sari Wahyuni (2021) 2ReLogCarChain using blockchain technology for carbon footprint tracking and monitoring. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Chin, S. Y. (2021) Effect of residence time on the morphology of silica nanoparticles synthesized in a microfluidic reactor. Journal of Flow Chemistry. pp. 1-14. ISSN 2063-0212. (Published)

Fiona Ling, Wang Ming and Abdulbari, Hayder A. and Chin, S. Y. (2021) Investigating the effect of nonionic surfactant on the silica nanoparticles formation and morphology in a microfluidic reactor. Journal of Flow Chemistry, 11. pp. 737-750. ISSN 2063-0212. (Published)

Firda, Andriyan and Wahyu, Sapto Aji (2021) DC motor speed regulation using speech recognition. Buletin Ilmiah Sarjana Teknik Elektro, 3 (1). pp. 41-49. ISSN 2685-9572. (Published)

Firdaus, Basrawi and Chandran, Puganesa (2021) PV cools: Close loop water cooling system for PV module. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Foo, K. and Liang, Y. Y. and Tan, C. K. and Weihs, G. A. Fimbres (2021) Coupled effects of circular and elliptical feed spacers under forced-slip on viscous dissipation and mass transfer enhancement based on CFD. Journal of Membrane Science, 637 (119599). pp. 1-13. ISSN 0376-7388. (Published)

G

G., Danoshini and A., Baqadeem and A. K. S., Al-Shakhrit and N. E., Jasni and Khairil Azman, Masri (2021) Statistical Analysis of Stone Mastic Asphalt Incorporating Kenaf Fibre. Construction, 1 (1). pp. 12-17. ISSN 2785-8731. (Published)

G. K., Chua and F. H. Y., Tan and F. N., Chew and A. R., Mohd Hairul and M. A. A., Ahmad (2021) Food waste hydrolysate as fermentation medium: Comparison of pre-treatment methods. In: Materials Today: Proceedings, International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 131-137., 42 (Part 1). ISSN 2214-7853 (Published)

Gamil Abdulraqeb, Abdullah Saeed (2021) Development of parametric model for ungrouped and grouped line transect data. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Goh, Ming Qian (2021) Adaptive fuzzy proportional-integral-derivative control for micro aerial vehicle. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Owl, Pebrianti).

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Kirpichnikova, I. M. and Cuce, Erdem (2021) Energy analysis of utility-scale PV plant in the rain-dominated tropical monsoon climates. Case Studies in Thermal Engineering, 26 (101123). pp. 1-11. ISSN 2214-157X. (Published)

Gopi, Ajith and Sudhakar, K. and Ngui, Wai Keng and Krishnan, Ananthu R. and Priya, S. Shanmuga (2021) Performance modeling of the weather impact on a utility-scale PV power plant in a tropical region. International Journal of Photoenergy, 2021 (5551014). pp. 1-10. ISSN 1687-529X (Online). (Published)

Gu, Hongyan and Liang, Huimin and Tong, Guoyun and Liu, Fang and Liu, Yu and Liu, Xing and Jia, Zhen and Paul, John (2021) Research on vibration mechanism and control technology of building structure under earthquake action. Journal of Vibroengineering, 23 (6). pp. 1395-1406. ISSN 1392-8716. (Published)

Gunalan, Sanasie and Zul Izwan, Abdul Radzak and Muhammad Aizzat, Zakaria (2021) Preventive maintenance data logger monitoring system. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 68-78. ISSN 2637-0883. (Published)

Gupta, Arun and Soubam, Triveni (2021) Novel bio- based adhesive from cross-linked rice starch-natural rubber latex (nrl) for wood based panels bonding. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Gurcharan Singh Bedi, Jasvin Kaur Bedi and Abdul Rahimi, Abdul Rahman and Din, Zia Ud (2021) Heavy machinery operators : Necessary competencies to reduce construction accidents. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-12., 641 (012007). ISSN 1755-1307 (Published)

H

H. A., Khohar and R. A., Rahman and A. T., Haron and M., Esa (2021) Assessment Strategies to Evaluate Building Information Modeling Capabilities of Organizations. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-11., 641 (012012). ISSN 1757-899X (Published)

H. A., Roslan and M. I., Adiyanto and N. S. H., Harith and Faisal, Ade and S. M.S. A., Razak (2021) Impact of seismic design on cost of structural materials for two storey hostel building in Sabah. In: IOP Conference Series: Earth and Environmental Science, 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012024). ISSN 1755-1307 (Published)

Habberrih, Salah Omar Abdulali and Islam, Mir Sujaul and Zaied, Khalid and Che Ku Mohammad, Faizal and Fadzil, Mat Yahaya (2021) The antifungal efficiency of Moringa oleifera seed extracts for tap water treatment. Maejo International Journal of Energy and Environmental Communication, 3 (2). pp. 45-54. ISSN 2673-0537. (Published)

Hajar, Mohammed A. and Alkahtani, Ammar Ahmed and Daing Mohd Nasir, Ibrahim and Mohd Ridzuan, Darun and Al-Sharaf, Mohammed A. and Tiong, Sieh Kiong (2021) The approach of value innovation towards superior performance, competitive advantage, and sustainable growth: A systematic literature review. Sustainability, 13 (18). pp. 1-32. ISSN 2071-1050. (Published)

Halili, Munira and Fernando, Yudi and Tseng, Ming-Lang (2021) Nexus of Sustainable Social Supply Chain Practices, Local Supplier Development and Safety Performance. In: The 2021 Asia Pacific Industrial Engineering & Management Systems 5th Webinar , 3-4 December 2021 , Taiwan. pp. 1-7., 1 (1). (Published)

Halimah, Ab. Rahim and Hasan, Ahmad and Mohd Hasbi, Ab. Rahim (2021) Extraction of Gelatin from Different Parts of Gallus Gallus Domesticus. Current Science and Technology (CST), 1 (1). pp. 50-55. (Published)

Hamada, Hussein M. and Thomas, Blessen Skariah and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Yang, Jian and Abdalla, Jamal A. and Hawileh, Rami A. (2021) Sustainable use of palm oil fuel ash as a supplementary cementitious material: A comprehensive review. Journal of Building Engineering, 40 (102286). pp. 1-14. ISSN 2352-7102. (Published)

Hamid Nour, Abdurahman and Akbari, Sweeta and Rosli, Mohd Yunus and Mona, Timan (2021) Potential of fenugreek seed extract for health, the environment and the economy. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Hamisa, A. H. and Azmi, W. H. and Mohd Yusof, Taib and Sharif, M. Z. and Dahlan, A. A. (2021) Development of automotive air-conditioning system test rig for hybrid electric vehicles. In: Journal of Physics: Conference Series; 2020 International Conference on Innovative Technology and Sciences, ICITSS 2020 , 12 - 13 November 2020 , Kuantan, Virtual. pp. 1-11., 2000 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Hammood, Waleed A. and Ruzaini, Abdullah Arshah and Salwana, Mohamad Asmara and Al Halbusi, Hussam and Hammood, Omar A. and Al Abri, Salem (2021) A Systematic Review on Flood Early Warning and Response System (FEWRS): A Deep Review and Analysis. Sustainability, 13 (1). pp. 1-24. ISSN 2071-1050. (Published)

Hamza, Nidal Abdelgadir Ahmed and Mazlina, Abdul Majid and Hujainah, Fadhl (2021) SIM-PFED: A simulation-based decision making model of patient flow for improving patient throughput time in Emergency Department. IEEE Access, 9. pp. 103419-103439. ISSN 2169-3536. (Published)

Hanaysha, Jalal Rajeh and Saleh, Isam and Suhaidah, Hussain and Lee, Khai Loon and Abu Bakar, Zahari (2021) Determinants of firm performance in automotive industry: Empirical insights from Malaysia. International Journal of Service Science, Management, Engineering, and Technology (IJSSMET), 12 (4). 132 -148. ISSN 1947-959X. (Published)

Haneef, M. S. and Aiman, M. H. and Muhammad Naqiuddin, Mat Salleh and Quazi, M. M. and Mahadzir, I. (2021) Microstructure analysis and mechanical properties of dissimilar AA6061-AA7075 laser brazing with prefixed ER5356 filler. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (012022). ISSN 1757-899X (Published)

Hanis Nadiah, Ruslana and Khairunisa, Muthusamy and Sharifah Maszura, Syed Mohsin and Rajan, Jose and Roslina, Omar (2021) Oyster shell waste as a concrete ingredient: a review. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences (iCITES 2020) , 22 Dec. 2020 , Virtual Conference. pp. 713-719., 48 (4). ISSN 2214-7853 (Published)

Hanon, Muammel M. and Zsidai, László and Ma, Quanjin (2021) Accuracy investigation of 3D printed PLA with various process parameters and different colors. In: Materials Today: Proceedings; 3rd International Conference on Materials Engineering and Science, IConMEAS 2020 , 28 - 30 December 2020 , Kuala Lumpur, Malaysia. 3089 -3096., 42 (5). ISSN 2214-7853 (Published)

Haryati, Awang and A F, Salmanfarsi and A, Arizam and Mohamad Idris, Ali (2021) Engineering characterisation of weathered rock at Sri Jaya, Pahang, Malaysia. IOP Conference Series: Earth and Environmental Science, 682. 012-016. ISSN 1755-1315. (Published)

Haryati, Awang and A F, Salmanfarsi and A Z, Misbahuddin and Mohamad Idris, Ali (2021) Slope stability analysis of rock mass using Rock Mass Rating and Slope Mass Rating. In: 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16-17 October 2020 , Putrajaya, Virtual. pp. 1-6., 682 (1). ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)

Haryati, Awang and Ahmad Faiz, Salmanfarsi and M S, Aminudin and Mohamad Idris, Ali (2021) Stability of weathered cut slope by using kinematic analysis. In: IOP Conference Series: Earth and Environmental Science. 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16-17 October 2020 , Putrajaya, Virtual. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)

Hasan, K. and Fadzil, Mat Yahaya and Karim, A. and Rokiah, Othman (2021) Investigation on the properties of mortar containing palm oil fuel ash and seashell powder as partial cement replacement. Construction, 1 (2). pp. 50-61. ISSN 2785-8731. (Published)

Hasan, Md Munirul and Islam, M. S. and S., A. Bakar and M. M., Rahman and Kabir, M. N. (2021) Applications of artificial neural networks in engine cooling system. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 471 -476.. (Published)

Hasan, Md. Munirul and Rahman, Md. Arafatur and Sedigh, Arya and Khasanah, Ana U. and Asyhari, A. Taufiq and Tao, Hai and Suraya, Abu Bakar (2021) Search and rescue operation in flooded areas: A survey on emerging sensor networking-enabled IoT-oriented technologies and applications. Cognitive Systems Research, 67. pp. 104-123. ISSN 1389-0417. (Published)

Hashim, N. A. and Abdul Mudalip, S. K. and Sulaiman, S. Z. and Md Shaarani, Shalyda (2021) Nutritional values and microencapsulation techniques of fish oil from different sources: A mini review. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 222-228., 42 (1). ISSN 2214-7853 (Published)

Hasmiza, Yaakob and Muhammad Nubli, Abdul Wahab (2021) Kajian persepsi murid sekolah rendah di kawasan luar bandar dalam mempelajari mata. Jurnal Pendidikan Malaysia. pp. 1-16. ISSN 0126-6020. (Submitted) (Submitted)

Hassan, N. H. and Abdul Sahli, Fakharudin (2021) Model for phishing websites classification using artificial neural network. International Journal of Software Engineering & Computer Sciences (IJSECS), 7 (2). pp. 1-8. ISSN 2289-8522. (Published)

Haziqatulhanis, Ibrahim and Norazlianie, Sazali and Wan Norharyati, Wan Salleh and Ahmad Fauzi, Ismail (2021) Nanocellulose‑based materials and recent application for heavy metal removal. Water, Air, & Soil Pollution An International Journal of Environmental Pollution, 305. pp. 1-16. ISSN 1573-2932. (Published)

Hazman, Abu Hassan and Hagos, F. Y. and Kadarohman, Asep and Sardjono, R. E. and Khoerunnisa, Fitri and Bo, Zhang and Jiang, X. X. (2021) Engine emissions analysis of emulsified fuel of different blend ratios. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-10., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Hazri Dahalan, Md Razip (2021) Determining the voltage sag immunity of ac contactor with field testing in petrochemical plant. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ahmad, Abu Zaharin).

Hazrulrizawati, Abd Hamid and Farah Hanani, Zulkifli and Muhamad Zubbair Ammar, Khairul Anuar (2021) DeerA-OS Bone Void Filler. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Hazrulrizawati, Abd Hamid and Roziasyahira, Mutaza and Izzah Hayati, Yahya and Zeyohannes, Senait Sileshi (2021) Starch-based film incorporated with clitoria ternatea flower extracts as pH indicator. In: Materials Science Forum. 2nd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2020 , 26 - 27 August 2020 , Virtual, Online. pp. 252-256., 1025. ISSN 0255-5476 ISBN 978-303573757-8 (Published)

Hazrulrizawati, Abd Hamid and Roziasyahira, Mutazah and Izzah Hayati, Yahya and Zeyohannes, Senait Sileshi (2021) Antioxidant and antimicrobial screening of isolated alkaloids from tinospora crispa. In: Materials Science Forum. 2nd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2020 , 26 - 27 August 2020 , Virtual, Online. pp. 163-168., 1025. ISSN 0255-5476 ISBN 978-303573757-8 (Published)

Hazrulrizawati, Hamid and Aizi Nor Mazila, Ramli and Izzah Hayati, Yahaya (2021) Physiochemical Analysis of Cocoa Powder-Like from Roasted Seeds of Fermented Nephelium lappaceum L. (Rambutan) and Nephelium mutabile Bl. (Pulasan) Fruits. Malaysian Journal of Chemistry, 23 (2). pp. 121-126. ISSN 1511-2292. (Published)

Hazrulrizawati, Hamid and Muhamad Zubbair Ammar, Khairul Anuar and Farah Hanani, Zulkifli (2021) Preparation and characterization of deer velvet antler/polyvinyl alcohol (DVA/PVA) scaffold for bone tissue engineering. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1332-1337., 51 (Part 2). ISSN 2214-7853 (Published)

Ho, C. M. and Tan, Q. N. and Doh, S. I. and Omar, J. and Mohammed Al-Btoush, K. A. (2021) A study on the acceptance level of rack housing in Malaysia. Construction, 1 (2). pp. 1-8. ISSN 2785-8731. (Published)

Hossain, Md. Sanower and Sharfaraz, Ashik and Dutta, Amit and Ahsan, Asif and Masud, Md. Anwarul and Ahmed, Idris Adewale and Goh, Bey Hing and Urbi, Zannat and Sarker, Md. Moklesur Rahman and Ming, Long Chiau (2021) A review of ethnobotany, phytochemistry, antimicrobial pharmacology and toxicology of Nigella sativa L. Biomedicine & Pharmacotherapy, 143 (112182). pp. 1-25. ISSN 0753-3322. (Published)

Hossain, Sanower and Urbi, Zannat and Hidayah, Karuniawati and Ramisa, Mohiuddin and Qrimida, Ahmed Moh and Mohamed Masaud Allzrag, Akrm and Ming, Long Chiau and Pagano, Ester and Capasso, Raffaele (2021) Andrographis paniculata (Burm. f.) wall. ex nees: An updated review of phytochemistry, antimicrobial pharmacology, and clinical safety and efficacy. Life, 11 (4). pp. 1-39. ISSN 2075-1729. (Published)

Hybat Salih, Mohamed Abdlrhman (2021) Characterization and optimization of the performance of an integrated ultrasonic membrane anaerobic (IUMAS) in treating pome as substrate. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hamid Nour, Abdurahman).

I

I., Albiajawi and R., Embong and K., Muthusamy (2021) Influence of mineral admixtures on the properties of self-compacting concrete: An overview. Construction, 1 (2). pp. 62-75. ISSN 2785-8731. (Published)

Ilan Cheliyan, Samylingam (2021) Investigation of thermophysical properties of ternary nitrate based phase change material induced with mxene as novel class of nanocomposites. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Kumaran, Kadirgama).

Ilyas, Muhammad and Kassa, Freselam Mulubrhan and Mohd Ridzuan, Darun (2021) Life cycle cost analysis of wastewater treatment: A systematic review of literature. Journal of Cleaner Production, 310 (127549). pp. 1-15. ISSN 0959-6526 (print), 1879-1786 (online). (Published)

Ilyas, Muhammad and Kassa, Freselam Mulubrhan and Mohd Ridzuan, Darun (2021) A proposed framework of life cycle cost analysis for petrochemical wastewater treatment plants. In: Proceedings of the International Conference on Civil, Offshore and Environmental Engineering. Lecture Notes in Civil Engineering; 6th International Conference on Civil, Offshore and Environmental Engineering, ICCOEE 2020 , 13 - 15 July 2021 , Kuching. 147 -153., 132. ISSN 2366-2557 ISBN 978-981336310-6 (Published)

Iman Haddad Qaisara Dhia, Mohd Mahzan and Lee, Khai Loon (2021) Elimination of misconduct in manual counting process as an improvement of inventory accuracy in a manufacturing company. International Journal of Industrial Management (IJIM), 10 (1). pp. 140-150. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Imran, Khan (2021) The effect of active reading software on saudi efl learners’ reading comprehension skills. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Irene, Wei Kiong Ting and Chen, Fu-Chiang and Qian, Long Kweh and Sui, Hai Juan and Le, Hanh Thi My (2021) Intellectual capital and bank branches' efficiency: an integrated study. Journal Of Intellectual Capital. pp. 1-24. ISSN 1469-1930. (In Press / Online First) (In Press / Online First)

Irene, Wei Kiong Ting and Kweh, Qian Long and Norazlin, Ahmad and Paramanantham, Neshaleni S. (2021) Different levels of family ownership and dividend payout in the presence of growth opportunities. Afro-Asian Journal of Finance and Accounting, 11 (6). pp. 787-807. ISSN 1751-6455. (Published)

Irene, Wei Kiong Ting and Sui, Hai Juan and Qian, Long Kweh and Nawanir, Gusman (2021) Knowledge management and firm innovative performance with the moderating role of transformational leadership. Journal of Knowledge Management. pp. 1-26. ISSN 1367-3270. (Published)

Irshad Ahamad, Khilji and Siti Nadiah, Mohd Saffe (2021) Collection of nanoparticles using novel filter process by edm. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Al Farid, Fahmid and Uddin, Jia and Alyami, Salem A. and Rashid, Mamunur and Abdul Majeed, Anwar P.P. and Moni, Mohammad Ali (2021) Diagnosis of hearing deficiency using EEG based AEP signals: CWT and improved-VGG16 pipeline. PeerJ Computer Science, 7. pp. 1-28. ISSN 2376-5992. (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Bari, Bifta Sama and Rashid, Mamunur and Mahfuzah, Mustafa (2021) Auditory Evoked Potential (AEP) Based Brain-Computer Interface (BCI) Technology: A Short Review. In: iCITES 2020: Advances in Robotics, Automation and Data Analytics , Universiti Malaysia Pahang (Virtual Conference). pp. 272-284.. ISBN 978-3-030-70917-4 (Published)

Islam, Md Nahidul and Norizam, Sulaiman and Rashid, Mamunur and Mahfuzah, Mustafa and Mohd Shawal, Jadin (2021) An intelligent system for hearing disorder detection using auditory evoked potential (AEP) signals. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Islam, Md Shamimul and Hasan, Md Mahedi and Abdullah, Sohaib and Md Akbar, Jalal Uddin and Arafat, N. H.M. and Murad, Saydul Akbar (2021) A deep Spatio-temporal network for vision-based sexual harassment detection. In: 2021 Emerging Technology in Computing, Communication and Electronics, ETCCE 2021. 2021 Emerging Technology in Computing, Communication and Electronics, ETCCE 2021 , 21 - 23 December 2021 , Dhaka. pp. 1-6.. ISBN 978-166548364-3 (Published)

Islam, Md Shofiqul and Ngahzaifa, Ab. Ghani (2021) A novel BiGRUBiLSTM model for Multilevel Sentiment Analysis Using Deep Neural Network with BiGRU-BiLSTM. In: Recent Trends in Mechatronics Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Universiti Malaysia Pahang (Virtual). pp. 403-414., 730. ISBN 978-981-33-4597-3 (Published)

Islam, Md Shofiqul and Sultana, Sunjida and Debnath, Uttam Kumar and Al Mahmud, Jubayer and Islam, S. M. Jahidul (2021) HARC-New Hybrid Method with Hierarchical Attention Based Bidirectional Recurrent Neural Network with Dilated Convolutional Neural Network to Recognize Multilabel Emotions from Text. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 7 (1). pp. 142-153. ISSN 2338-3070. (Published)

Ismail, . and Kamarul Hawari, Ghazali (2021) Multi focus image fusion with region-center based kernel. International Journal on Advanced Science, Engineering and Information Technology, 11 (1). 57 -63. ISSN 2088-5334. (Published)

Ismail, Zulhelmi and W. Idris, Wan Farhana and Abdullah, Abu Hannifa (2021) From shear exfoliation of graphite in Coca-Cola® to few-layer graphene for smart ink. Ceramics International, 47 (16). pp. 23309-23317. ISSN 0272-8842. (Published)

J

J., Mogan and L., Sandanamsamy and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review of FDM and graphene-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-14., 1078 (012032). ISSN 1757-899X (Published)

Jaber, Aws Naser and Moorthy, Kohbalan and Machap, Logenthiran and Safaai, Deris (2021) The importance of data classification using machine learning methods in microarray data. Telkomnika, 19 (2). pp. 491-498. ISSN 1693-6930. (Published)

Jadhav, Pramod and Nurmunira, Muhammad and Bhuyar, Prakash and Krishnan, Santhana and Abdul Syukor, Abd Razak and Zularisam, A. W. and Mohd Nasrullah, Zulkifli (2021) A review on the impact of conductive nanoparticles (CNPs) in anaerobic digestion: Applications and limitations. Environmental Technology & Innovation, 23 (101526). pp. 1-16. ISSN 2352-1864. (Published)

Jadhav Pramod, Chandrakant and Zaied, Khalid and Zularisam, A. W. and Krishnan, Santhana (2021) The role of iron-based nanoparticles (Fe-NPs) on methanogenesis in anaerobic digestion (AD) performance. Environmental Research (112043). pp. 1-48. ISSN 0013-9351. (In Press / Online First) (In Press / Online First)

Jafri, N. F. and Yaakob, M. N. A. and Rasidi, Roslan (2021) The extraction of lignin from empty fruit bunch fiber via microwave-assisted acid hydrotrope solvent. Current Science And Technology (CST), 1 (2). pp. 26-33. (Published)

Jamal Hisham, Hashim and Mohammad Adam, Adman and Zailina, Hashim and Mohd Firdaus, Mohd Rad and Soo, Chen Kwan (2021) COVID-19 epidemic in Malaysia: Epidemic progression, challenges, and response. Frontiers in Public Health, 9 (560592). pp. 1-19. ISSN 2296-2565. (Published)

Jamlos, M. A. and Jamlos, M. F. and Azri, A. and Mohamad Shaiful, Abdul Karim and Wan Azani, Mustafa and Akkaraekthalin, Prayoot (2021) Properties and performance verification on magnetite polydimethylsiloxane graphene array microwave sensor. Polymers, 13 (19). pp. 1-12. ISSN 2073-4360. (Published)

Jarrud, Mohammed Muftah and Lim, Kar Sing and Mohd Syahrul Hisyam, Mohd Sani (2021) An overview of numerical studies on flexural performance of built-up cold-formed steel beam (CFSB) filled with concrete. International Journal of Emerging Trends in Engineering Research, 9 (2). pp. 15-24. ISSN 2347-3983. (Published)

Jaya Vejayan, Palliah and Yasmin, A.C. Yahya and Sharifah A.T., Said and Aini Norhidayah, Mohamed and Venugopal, Jayarama Reddy and Normaiza, Z. and Halijah, Ibrahim (2021) Glycoprotein isolated from eurycoma longifolia (Tongkat Ali) is capable of boosting testosterone levels in leydig cells. Tropical Journal of Natural Product Research, 5 (6). pp. 1078-1082. ISSN 2616-0684. (Published)

Jayakumar, Saravanan and Bhuyar, Prakash and Pugazhendhi, Arivalagan and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam and Govindan, Natanamurugaraj (2021) Effects of light intensity and nutrients on the lipid content of marine microalga (diatom) Amphiprora sp. for promising biodiesel production. Science of The Total Environment, 768 (145471). pp. 1-11. ISSN 0048-9697. (Published)

Jessnor Arif, Mat Jizat and Anwar, P. P. Abdul Majeed and Ahmad Fakhri, Ab. Nasir and Zahari, Taha and Yuen, Edmund (2021) Evaluation of the machine learning classifier in wafer defects classification. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

JinKiong, Ling and Chelladurai, Karuppiah and Syam G., Krishnan and M. V., Reddy and Izan Izwan, Misnon and Mohd Hasbi, Ab. Rahim and Chun-Chen, Yang and Rajan, Jose (2021) Phosphate polyanion materials as high-voltage lithium-ion battery cathode: A review. Energy Fuels, 35 (13). pp. 10428-10450. ISSN 1520-5029. (Published)

JinKiong, Ling and Pradeep, Kumar and Kizhakkedath, Koyadan and Watson, Trystan M. and Mora-Sero, Ivan and Schmidt-Mende, Lukas and Brown, Thomas M. and Rajan, Jose (2021) A perspective on the commercial viability of perovskite solar cells. Solar RRL. pp. 1-48. ISSN 2367-198X. (In Press / Online First) (In Press / Online First)

Jothi Letchumy, Mahendra Kumar and Mamunur, Rashid and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The Classification of Wink-Based EEG Signals: The identification on efficiency of transfer learning models by means of kNN classifier. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 205-213.. ISBN 978-981164802-1 (Published)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The Classification of Wink-Based EEG Signals: The Identification of Significant Time-Domain Features. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 283-291., 198. ISSN 978-981-15-7309-5 (Published)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Musa, Rabiu Muazu and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The classification of EEG-based wink signals: A CWT-Transfer Learning pipeline. ICT Express. pp. 1-5. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Jothi Letchumy, Mahendra Kumar and Rashid, Mamunur and Rabiu Muazu, Musa and Mohd Azraai, Mohd Razman and Norizam, Sulaiman and Rozita, Jailani and Anwar, P. P. Abdul Majeed (2021) The classification of EEG-based winking signals: a transfer learning and random forest pipeline. PeerJ, 9 (e11182). pp. 1-16. ISSN 2167-8359. (Unpublished) (Unpublished)

Jui, Julakha Jahan and Mohd Ashraf, Ahmad (2021) A hybrid metaheuristic algorithm for identification of continuous-time Hammerstein systems. Applied Mathematical Modelling, 95. pp. 339-360. ISSN 0307-904X. (Published)

Jui, Julakha Jahan and Mohd Helmi, Suid and Zulkifli, Musa and Mohd Ashraf, Ahmad (2021) Identification of Liquid Slosh Behavior using Continuous-time Hammerstein Model based Sine Cosine Algorithm. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Gambang Campus, Kuantan, Pahang, Malaysia. pp. 345-356., 666. ISBN 978-981-15-5281-6 (Published)

Juliawati, Alias and N. A., Johari and A., Zanurin and Nasrul Azuan, Alang and M. Z. M., Zain (2021) Self-healing epoxy coating with microencapsulation of linseed oil for the corrosion protection of Magnesium (Mg). In: Journal of Physics: Conference Series. Journal of Physics: Conference Series; 1st International Conference on Material Processing and Technology, ICMProTech 2021 , 14 - 15 July 2021 , Perlis, Virtual. pp. 1-9., 2129 (0120081st). ISBN 1742-6588 (Published)

Juliza, Mohamad Arif and Mohd Faizal, Ab Razak and Sharfah Ratibah, Tuan Mat and Suryanti, Awang and Nor Syahidatul Nadiah, Ismail and Ahmad Firdaus, Zainal Abidin (2021) Android mobile malware detection using Fuzzy AHP. Journal of Information Security and Applications, 61 (102929). pp. 1-35. ISSN 2214-2126. (Published)

Juliza, Mohamad Arif and Mohd Faizal, Ab Razak and Suryanti, Awang and Sharfah Ratibah, Tuan Mat and Nor Syahidatul Nadiah, Ismail and Ahmad Firdaus, Zainal Abidin (2021) A review : Static analysis of android malware and detection technique. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan. pp. 1-6.. ISBN 978-1-6654-1407-4 (Published)

Juliza, Mohamad Arif and Mohd Faizal, Ab Razak and Suryanti, Awang and Sharfah Ratibah, Tuan Mat and Nor Syahidatul Nadiah, Ismail and Ahmad Firdaus, Zainal Abidin (2021) A static analysis approach for android permission-based malware detection systems. PLoS ONE, 16 (9). pp. 1-23. ISSN 1932-6203. (Published)

Jun Haslinda, Shariffuddin and Mohd Faizal, Ali and Nayeem, Abdullah (2021) Polysulfide: Sorbent made from waste cooking palm oil for petroleum refinery wastewater. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Jurida, Jamaludin (2021) Development and characterisation of gum arabic-kappa carrageenan composite film For hard capsule application. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

K

K., Peddakapu and M. R., Mohamed and P., Srinivasarao and A. S., Veerendra and D. J., K. Kishore and P. K., Leung (2021) Review on automatic generation control strategies for stabilising the frequency deviations in multiarea power system. International Journal of Ambient Energy, 1969272. pp. 1-25. ISSN 0143-0750 (Print); 2162-8246 (Online). (Published)

K., Peddakapu and M. R., Mohamed and P., Srinivasarao and P.K, Leung (2021) Frequency stabilization in interconnected power system using bat and harmony search algorithm with coordinated controllers. Applied Soft Computing, 113 (107986). pp. 1-18. ISSN 1568-4946 (print); 1872-9681 (online). (Published)

Kader, Md. Abdul and Kamal Z., Zamli (2021) Comparative study of five metaheuristic algorithms for team formation problem. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. 133 -143. (266559). ISSN 2195-4356 ISBN 978-981164114-5 (Published)

Kadhim, Saleem Khalefa and Ali, Sinan Abdulghafar and Razak, N. F. D. and M. S. M., Sani (2021) Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-13., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Kadhum, Laith M. and Ahmad Firdaus, Zainal Abidin and Mohamad Fadli, Zolkipli and Saferalia, Luay and Mohd Faizal, Ab Razak (2021) New formula to calculate the number of designs in RADG cryptosystem. International Journal of Nonlinear Analysis and Applications (IJNAA), 12 (1). pp. 821-829. ISSN 2008-6822. (Published)

Kalpana, Ramachandran (2021) Pelajar PhD UMP ungguli Pertandingan 3MT peringkat kebangsaan. UMP News .

Kalpana, Ramachandran (2021) UMP PhD student excel in national level 3MT Competition. UMP News .

Kamal Z., Zamli and Kader, Md. Abdul (2021) Chaotic map initializations with Tiki-Taka algorithm for software remodularization problem. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. 91 -100. (266559). ISSN 2195-4356 ISBN 978-981164114-5 (Published)

Kamal Z., Zamli and Kader, Md. Abdul (2021) Sequence t-way test generation using the barnacles mating optimizer algorithm. In: ACM International Conference Proceeding Series;10th International Conference on Software and Computer Applications, ICSCA 2021 , 23 - 26 February 2021 , Virtual, Online. 88 -93. (170691). ISBN 978-145038882-5 (Published)

Kamarulzaman, Mahmad Khairai and Muhammad Nubli, Abdul Wahab and Sutarto, Auditya Purwandini (2021) Heart Rate Variability (HRV) as a Physiological Marker of Stress Among Electronics Assembly Line Workers. In: Human-Centered Technology for a Better Tomorrow: Proceedings of HUMENS 2021 , 22 February 2020 , Pekan, Pahang, Malaysia. pp. 3-14.. ISBN 978-981-16-4115-2 (Published)

Kamil Zakwan, Mohd Azmi and Nurul Afiqah, Zainal and Muhammad Aizzat, Zakaria and Anwar, P. P. Abdul Majeed (2021) A Simulated Kalman Filter (SKF) approach in identifying optimum speed during cornering. In: RiTA 2020: Proceedings of the 8th International Conference on Robot Intelligence Technology and Applications , 11-13 December 2020 , Virtual hosted by EUREKA Robotics Lab, Cardiff School of Technologies, Cardiff Metropolitan University. pp. 433-439.. ISBN 978-981-16-4802-1 (Published)

Kangxing, Dong and Swan, Chiam Kee and Hafizoah, Kassim (2021) Exploring Tertiary ESL Learners’ Affective Attributes Toward Online Reading. Premise: Journal of English Education and Applied Linguistics, 10 (2). pp. 137-149. ISSN 2442-482x. (Published)

Karim, Ahasanul and Islam, M. Amirul and Mishra, Puranjan and Abu Jafar, Md Muzahid and Yousuf, Abu and Rahman Khan, Md. Maksudur and Che Ku, Mohammad Faizal (2021) Yeast and bacteria co-culture-based lipid production through bioremediation of palm oil mill effluent: a statistical optimization. Biomass Conversion and Biorefinery. pp. 1-13. ISSN 2190-6815. (Published)

Karim, Ahasanul and M., Amirul Islam and Puranjan, Mishra and Yousuf, Abu and Che Ku Mohammad, Faizal and Khan, Md. Maksudur Rahman (2021) Technical difficulties of mixed culture driven waste biomass-based biohydrogen production: Sustainability of current pretreatment techniques and future prospective. Renewable and Sustainable Energy Reviews, 151 (111519). pp. 1-19. ISSN 13640321. (Published)

Karim, Ahasanul and M., Amirul Islam and Zaied, Khalid and Yousuf, Abu and Khan, Md. Maksudur Rahman and Che Ku Mohammad Faizal, Che Ku Yahya (2021) Microbial lipid accumulation through bioremediation of palm oil mill effluent using a yeast-bacteria co-culture. Renewable Energy, 176. pp. 106-114. ISSN 0960-1481. (Published)

Karthiani, Kanagesan and Palanisamy, Karthick Murugan and Rameshprabu, Ramaraj and Mohd Hasbi, Ab Rahim and Govindan, Natanamurugaraj and Maniam, Gaanty Pragas (2021) Effect of photoperiod regimes on the cultivation of Nannochloropsis sp. in palm oil mill effluent for lipid production. In: 1st Postgraduate Sseminar On Agriculture And Forestry 2021 (PSAF2021) Enhancing Knowledge Through Research e-prosiding , 6 Oktober 2021 , Webex Meet (Online). pp. 101-107.. ISBN 978-967-26369 (Online) (Published)

Karthick Murugan, Palanisamy and Karthiani, Kanagesan and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan and Gaanty Pragas, Maniam (2021) Acceleration of Lipid Accumulation in Oleaginous Diatom Navicula sp. Under Nitrogen Limitation. In: E-Proceeding of the 1st Postgraduate Seminar on Agriculture and Forestry: Enhancing Knowledge through Research (PSAF 2021) , Virtual Mode , 6 October 2021. . ISBN 978-967-26369 (Published)

Karthick Murugan, Palanisamy and Primilla, Paramasivam and Gaanty Pragas, Maniam and Mohd Hasbi, Ab. Rahim and Natanamurugaraj, Govindan and Chisti, Yusuf (2021) Production of lipids by Chaetoceros affinis in media based on palm oil mill effluent. Journal of Biotechnology, 327. pp. 86-96. ISSN 0168-1656. (Published)

Kartikawati, Lili and Nabawi, Isnan and Rahayu, Vita and Kusrini, Kusrini and Ariatmanto, Dhani and Ernawan, Ferda (2021) Physical distancing system using computer vision. In: 3rd International Conference on Cybernetics and Intelligent Systems, ICORIS 2021. 3rd International Conference on Cybernetics and Intelligent Systems, ICORIS 2021 , 25 October 2021 , Virtual, Makassar. pp. 1-7.. ISBN 978-166542580-3 (Published)

Khairunisa, Muthusamy and Rahimah, Embong and Nabilla, Mohamad and Nur Syahira Hanim, Kamarul Bahrin and Fadzil, Mat Yahaya (2021) Setting time and compressive strength of mortar containing cockle shell powder as partial cement replacement. Key Engineering Materials, 879. pp. 62-67. ISSN 1662-9795. (Published)

Khairunisa, Muthusamy and Rahimah, Embong and Sharifah Maszura, Syed Mohsin and Nur Farhayu, Ariffin and Nabilla, Mohamad and Hanis Nadiah, Ruslan (2021) Eco-cement: Save the mother nature. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Khalid, Adam and Izzeldin, I. Mohd and Ibrahim, Younis (2021) Analyzing the instructions vulnerability of dense convolutional network on GPUS. International Journal of Electrical and Computer Engineering (IJECE), 11 (5). pp. 4481-4488. ISSN 2088-8708 (Print); 2722-2578 (Online). (Published)

Khalid Adam, Ismail Hammad (2021) Development of low-overhead soft error mitigation technique for safety critical neural networks applications. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Khalid Adam, Ismail Hammad and Izzeldin, I. Mohd and Ibrahim, Younis (2021) Analyzing the resilience of convolutional neural networks implemented on GPUs: Alexnet as a case study. International Journal of Electrical and Computer Engineering Systems, 12 (2). pp. 91-103. ISSN 1847-6996. (Published)

Khan, Raja Muhammad Ishtiaq and Noor Raha, Mohd Radzuan and Farooqi, Shahzad-ul-Hassan and Shahbaz, Muhammad and Khan, Mohammad Seemab (2021) Learners’ Perceptions on WhatsApp Integration as a Learning Tool to Develop EFL Spoken Vocabulary. International Journal of Language Education (IJoLE), 5 (2). pp. 1-14. ISSN 2548-8465. (Published)

Khandokar, I. and Hasan, Md M. and Ernawan, F. and Islam, Md Shofiqul and Kabir, M. N. (2021) Handwritten character recognition using convolutional neural network. In: Journal of Physics: Conference Series; 7th International Conference on Mathematics, Science, and Education 2020, ICMSE 2020 , 6 October 2020 , Semarang, Virtual. pp. 1-6., 1918 (042152). ISSN 1742-6596 (Published)

Khilji, Irshad Ahamad and Pathak, Sunil and Siti Nadiah, Mohd Saffe and Biswas, Shatarupa and Singh, Yogesh (2021) Opportunities and ehallenges in Nanoparticles Formation by Electrical Discharge Machining. In: Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering . Springer Singapore, Singapore, pp. 203-210. ISBN 978-981-15-7711-6

Kho, Yap Bing and Rahimah, Jusoh and Mohd Zuki, Salleh and Mohd Hisyam, Mohd Ariff and Pop, Ioan (2021) Homann Stagnation Point Flow and Heat Transfer of Hybrid Nanofluids Over a Permeable Radially Stretching/Shrinking Sheet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 101-112. ISSN 2289-7879. (Published)

Kho, Yap Bing and Rahimah, Jusoh and Mohd Zuki, Salleh and Zulkhibri, Ismail and Mohd Hisyam, Mohd Ariff (2021) Influence of viscous dissipation on the boundary layer flow of hybrid nanofluid. JP Journal of Heat and Mass Transfer, 23 (2). pp. 235-246. ISSN 0973-5763. (Published)

Khoo, Jun Li and Radhiyah, Abd Aziz (2021) Callophyllum Inophyllum shell derived of activated carbon for additive of machining lubricant. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1868-1872., 48 (6). ISSN 2214-7853 (Published)

Khosenulhan, Ab. Rahman and Hassan, Ahmad (2021) Kualiti perkhidmatan di klinik perubatan swasta dan kesan kepada pesakit: Analisis literatur. (Quality of services in private clinics and impact on patients: literature analysis). Jurnal Dunia Pengurusan, 3 (1). pp. 170-179. ISSN 2682-8251 (online). (Published)

Kishore, D. J. Krishna and Mohamed, M. R. and Sudhakar, K. and Jewaliddin, S. K. and Peddakapu, K. and Srinivasarao, P. (2021) Ultra-short-term PV power forecasting based on a support vector machine with improved dragonfly algorithm. In: 1st IEEE International Conference on Emerging Trends in Industry 4.0, ETI 4.0 2021 , 19 - 21 May 2021 , Raigarh, India. pp. 1-5. (175124). ISBN 978-166542237-6 (Published)

Kong, Chung Hwa (2021) Investigation of inclusion casting, sand blasting and embossing methods to prepare engine cylinder bore surface for frictional and wear improvement. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Kothari, Richa and Ahmad, Shamshad and Samykano, M. and Tyagi, V. V. and Pandey, A. K. and Saidur, R. (2021) Optimization of extraction process of jatropha oil by using quenching agent. In: IOP Conference Series: Materials Science and Engineering; International Scientific Forum (ISF 2019) , 16th-17th December 2019 , Malacca, Malaysia. pp. 1-9., 1127 (1). ISSN 1757-899X (Published)

Kottasamy, Arvind and Samykano, M. and K., Kadirgama and D., Ramasamy and M. M., Rahman and Pandey, Adarsh Kumar (2021) Optimization of impact energy of copper-polylactic acid (Cu-PLA) composite using response surface methodology for FDM 3D printing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). 78 -90. ISSN 2289-7879. (Published)

Kumar, Senthil and Aslam, Mohammad (2021) Predicting microfinance loan default. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Kumar A., Praveen and Nagarjun, J. and Ma, Quanjin (2021) Potentiality of MWCNT fillers on the lateral crashworthiness behaviour of polymer composite cylindrical tubes under quasi-static loading. Journal of Industrial Textiles, 51 (Issue 4_suppl). 7014S-7033S. ISSN 1528-0837. (Published)

Kunwar, Ria and Krishnan, Syam G. and Izan Izwan, Misnon and Zabihi, Fatemeh and Yang, Shengyuan and Yang, Chun-Chen and Rajan, Jose (2021) Transformation of supercapacitive charge storage behaviour in a multi elemental spinel CuMn2O4 nanofibers with alkaline and neutral electrolytes. Advanced Fiber Materials, 3 (4). 265 -274. ISSN 2524-7921. (Published)

Kurukuri, Peddakapu (2021) Frequency deviations stabilizations in restructured power systems using coordinative controllers. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Rusllim, Mohamed).

Kweh, Qian Long and Irene, Wei Kiong Ting and Noor Azlinna, Azizan and Norazlin, Ahmad (2021) Political connections and cash holdings in financially constrained firms: evidence from top 500 firms in Malaysia. International Journal of Business Excellence (IJBEX), 24 (1). pp. 125-141. ISSN 17560-047. (Published)

L

L., Sandanamsamy and J., Mogan and N. A., Halim and W. S. W., Harun and K., Kadirgama and D., Ramasamy (2021) A review on 3D printing bio-based polymer composite. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012031). ISSN 1757-899X (Published)

Lai, Chor Kiew and Md Muzahid, Abu Jafar and Kamarulzaman, Syafiq F. (2021) Vehicle route tracking system based on vehicle registration number recognition using template matching algorithm. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24 - 26 August 2021 , Pekan, Virtual. 249 -254.. ISBN 9781665414074 (Published)

Latiff, M. I. A. and Izwan, Ismail and Nuruzzaman, D.M. (2021) Characteristics of six layered Al/Si3N4 functionally graded materials prepared through two-step pressureless sintering process. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8508 -8517. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Lau, N. Jun and Mahadi, Bahari and Setiabudi, H. D. and A. A., Jalil and Vo, Dai-Viet N. (2021) Greenhouse gas mitigation and hydrogen generation via enhanced ethylene glycol dry reforming on La-promoted Co/Al2O3 catalyst. Process Safety And Environmental Protection, 150. pp. 356-364. ISSN 0957-5820. (Published)

Lee, Choon Fatt and Nurul Waheeda, Abdu Rahman and Mohd Aizudin, Abd Aziz and K, M Isa (2021) Identification of the chemical constituents of Curcuma caesia (Black Turmeric) Hydrosol extracted by hydro-distillation method. IOP Conf. Series: Earth and Environmental Science, 765 () 012025). pp. 1-9. ISSN 1755-1315. (Published)

Lee, Helen and Syarifah Nur Hasanah, Syed Kamarudin and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Feasibility Study of Wafer Scale Laser Assisted Thermal Imprinting of Glass Nanostructures. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 917-923.. ISBN 978-981-15-9505-9 (Published)

Lee, Helen May Shian and Syarifah Nur Hasanah, Syed Kamarudin and Ismayuzri, Ishak and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf and Mohd Zairulnizam, Mohd Zawawi (2021) Laser-assisted thermal imprinting of glass guided mode resonant (GMR) optical filter. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 63-70. ISSN 2636-9575. (Published)

Lee, Ji Zhe and Anwar P. P., Abdul Majeed (2021) Classification of skin cancer by means of transfer learning models. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 77-81. ISSN 2637-0883. (Published)

Lee, Khai Loon and Puteri Nurhazira, Romzi (2021) Improving canteen's service and operations management: A case study using modelling and simulation approach. In: Service and Operation Management. Penerbit UTHM, Batu Pahat, Johor, pp. 51-59. ISBN 978-967-2817-33-8 (Unpublished)

Lee, Khai Loon and Teh, Xing Qi (2021) The effect of lean and agile practices on supply chain operational performance in Malaysia manufacturing industry. International Journal of Industrial Management (IJIM), 12 (1). 319 -340. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Lim, Wee Sheng and Ahmad Fakhri, Ab. Nasir and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed and Nur Shazwani, Kamarudin and Muhammad Zulfahmi Toh, Abdullah (2021) Traffic sign classification using transfer learning: An investigation of feature-combining model. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 37-41. ISSN 2637-0883. (Published)

Lim, Wei Jie and Teoh, Poh Sen and Normaniha, Abd Ghani and M. F., Abas (2021) Automatic control of color sorting and pick/place of a 6- DOF robot arm. Journal Europeen des Systemes Automatises, 54 (3). 435 -443. ISSN 1269-6935. (Published)

Ling, Jin Kiong and Jose, Rajan (2021) Electrospun SnO2-CuO semiconductor composite nanofibers and its electrochemical properties. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1631-1634., 46 (Part 4). ISSN 2214-7853 (Published)

Ling, Jin Kiong and Jose, Rajan (2021) Metal oxide nanofibers in solar cells. In: Metal Oxide-Based Nanofibers and Their Applications. Metal Oxides . Elsevier Inc., UK, pp. 277-300. ISBN 978-0-12-820629-4

Liu, Xinni (2021) Enhanced faster region-based convolutional neural network for oil palm tree detection. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Liu, Xinni and Hussein, Sadaam Hadee and Kamarul Hawari, Ghazali and Tung, Tran Minh and Yaseen, Zaher Mundher (2021) Optimized adaptive neuro-fuzzy inference system using metaheuristic algorithms: Application of shield tunnelling ground surface settlement prediction. Complexity, 2021 (6666699). pp. 1-15. ISSN 1076-2787. (Published)

M

M., Fuad and Ernawan, Ferda and Hui, L. J. (2021) Video scene change detection based on histogram analysis for hiding message. In: Journal of Physics: Conference Series; 7th International Conference on Mathematics, Science, and Education 2020, ICMSE 2020 , 6 October 2020 , Semarang, Virtual. pp. 1-8., 1918 (4). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

M., Kaviya and P., Ramakrishnan and S. B., Mohamed and R., Ramakrishnan and J., Gimbun and K. M., Veerabadran and M. R., Kuppusamy and K., Kaviyarasu and T. M., Sridhar (2021) Synthesis and characterization of nano-hydroxyapatite/graphene oxide composite materials for medical implant coating applications. In: Materials Today: Proceedings, NANOSMATAFRICA-2018 , 19-23 November 2018 , CapeTown, South Africa. pp. 204-207., 36 (Part 2). ISSN 2214-7853 (Published)

M., Samykano and Kananathan, J. and K., Kadirgama and Amirruddin, Abdul Kadir and D., Ramasamy and Samylingam, L. (2021) Characterisation, performance and optimisation of nanocellulose metalworking fluid (MWF) for green machining process. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 9188-9207. ISSN 2180-1606. (Published)

M., Sandhya and D., Ramasamy and K., Kadirgama and W. S. W., Harun and M., Samykano and A., Ameer (2021) Enhancement of tribological behaviour and thermophysical properties of engine oil lubricant by Graphene/Co-Cr nanoparticle additives for preparation of stable nanolubricant. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-10., 1078 (012016). ISSN 1757-899X (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Enhancement of the heat transfer in radiator with louvered fin by using graphene-based hybrid nanofluids. In: IOP Conference Series: Materials Science and Engineering, 1st International Colloquium on Computational and Experimental Mechanics (ICCEM 2020) , 25 - 26 June 2020 , Selangor, Malaysia. pp. 1-14., 1062 (012014). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

M., Sandhya and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Heat transfer performance of a radiator with and without louvered strip by using graphene-based nanofluids. Journal of Thermal Engineering, 7 (6). 1315 -1328. ISSN 2148-7847. (Published)

M. A., Amzar Kamarudin and S. W., Ahmad and W. A. R., Wan Ariffin (2021) The behaviour of high-rise building with or without shear wall under different earthquakes. Construction, 1 (2). 93 -101. ISSN 2785-8731. (Published)

M. A. F., Romzi and Juliawati, Alias and M. I. M., Ramli (2021) Recent progress on the corrosion characterization of magnesium (Mg) prepared by powder metallurgy technique. In: IOP Conference Series: Materials Science and Engineering, International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , Pekan, Malaysia , 10-11 November 2020. pp. 1-12., 1068 (012004). ISSN 1757-899X (Published)

M. A. S. M., Tarminzi and Amir, Abdul Razak and M. A. A., Azmi and Y. H., Ming and M. R. M., Akramin and N. M., Mohktar and A. F., Sharol (2021) Recent advances in solar drying system: A review. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 1-13. ISSN 2289-697X. (Published)

M. F., Masrom and N. M. A., Ghani and M. O., Tokhi (2021) Particle swarm optimization and spiral dynamic algorithm-based interval type-2 fuzzy logic control of triple-link inverted pendulum system : a comparative assessment. Journal of Low Frequency Noise, Vibration and Active Control, 40 (1). pp. 367-382. ISSN 1461-3484 (Print), 2048-4046 (Online). (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of different processing parameters on the semisolid microstructure of Al6061 produced by a direct thermal method. In: International Conference on Innovative Technology, Engineering and Sciences (ICTES 2020) , 22 December 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. . (Published)

M. F. M., Tajudin and Asnul Hadi, Ahmad and Mohd Rashidi, Maarof (2021) Effects of direct thermal method processing parameters on mechanical properties of semisolid A6061 feedstock. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8585 -8591. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

M. H. M., Hamdan and Siregar, J. P. and Tezara, C. and Rusiyanto, R. and Oumer, A. N. and J., Jaafar and M., Zalinawati (2021) Effect of fabric orientations on mechanical properties of hybrid jute-ramie reinforced unsaturated polyester composites. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-13., 700 (1). ISSN 1755-1307 (Published)

M. I. M., Ramli and M. A. F., Romzi and Juliawati, Alias (2021) Effect of surface condition on the corrosion behaviour of AZ31 magnesium alloy. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

M. K., Akasyah and I. M., Yusri and R., Mamat and M. F., Jamlos and A. P. P., Abdul Majeed (2021) Experimental evaluation of tertiary blends of water in diesel with butyl alcohol using compression ignition engine. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-14., 1092 (012072). ISSN 1757-899X (Published)

M. N., Mohd Foudzi and Mohd Yusof, Taib and A. S., Arnizam Shah and A. R., Yusoff (2021) Monitoring energy audit for energy savings using non cost technique at electronics company. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 71-79. ISSN 2636-9575. (Published)

M. N., Noordin and H., Osman and H. A., Aziz and N., Rosli and M., Widia and E. H., Sukadarin and N. S., Fauzan and H. R., Zadry and A.A., Ab Rashid (2021) An Analysis of Injury Patterns for Drivers Based on Police Reported Frontal Crashes in Malaysia. Journal of the Society of Automotive Engineers Malaysia, 5 (3). pp. 476-489. ISSN 2550-2239. (Published)

M. Shahkhir, Mozamir and Rohani, Abu Bakar and Wan Isni Soffiah, Wan Din and Zalili, Musa (2021) Improved GbLN-PSO Algorithm for indoor localization in wireless sensor network. Journal of Communications, 16 (6). pp. 1-8. ISSN 1796-2021. (Published)

M. Y., Yuserny and M. H., Aiman and M. M., Quazi and M., Ishak and J., Shamini (2021) Viability of the novel process of indirect laser brazing. Lasers in Engineering, 51 (6). pp. 379-389. ISSN 1029-029X. (Published)

Ma, Quanjin and Ge, Jia and Mohd Ruzaimi, Mat Rejab and Sun, Bo and Ding, Yajun and Nie, Xiaohan and Pang, Hao (2021) Fabrication of the carbon fiber reinforced plastic (CFRP) cone tube through the laboratory-scale 3-axis winding machine. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1645-1651., 46 (Part 4). ISSN 2214-7853 (Published)

Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Kumar, A. Praveen and Zhang, Bo and Sun, Bo and Mohamad Nazirul Mubin, Merzuki (2021) Free vibration analysis of two novel spherical-roof contoured cores (SRCC): A numerical study. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2021 , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1775-1782., 48 (Part 6). ISSN 2214-7853 (Published)

Ma, Quanjin and Rejab, M. R. M. and Hanon, Muammel M. and Idris, Mat Sahat and Siregar, J. P. (2021) 3D-Printed Spherical-Roof Contoured-Core (SRCC) composite sandwich structures for aerospace applications. In: High-Performance Composite Structures. Composites Science and Technology . Springer, Singapore, pp. 75-91. ISBN 978-981-16-7377-1

Ma, Quanjin and Rejab, M. R. M. and Kumar, A. Praveen and Fu, Hao and Manoj Kumar, Nallapaneni and Tang, Jianbo (2021) Effect of infill pattern, density and material type of 3D printed cubic structure under quasi-static loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (19). 4254 -4272. ISSN 0954-4062. (Published)

Ma, Quanjin and Rejab, M. R. M. and Siregar, J. P. and Guan, Zhongwei (2021) A review of the recent trends on core structures and impact response of sandwich panels. Journal of Composite Materials, 55 (18). pp. 2513-2555. ISSN 0021-9983 (print); 1530-793X (online). (Published)

Ma, Quanjin and Rejab, M. R. M. and Sun, Bo and Merzuk, M. N. M. (2021) A brief review of the cubic star on structural design, applications, and future perspective. Journal of Advanced Research in Applied Sciences and Engineering Technology, 24 (1). pp. 10-17. ISSN 2462-1943. (Published)

Mahadi, Bahari and H. D., Setiabudi and N., Ainirazali and Vo, Dai-Viet N. (2021) A short review on bimetallic Co-based catalysts for carbon dioxide reforming of methane. In: Materials Today: Proceedings; 5th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2020 , 9 - 11 August 2020 , Kuala Lumpur. pp. 94-100., 42 (Part 1). ISSN 2214-7853 (Published)

Mahamude, A. S. F. and W. S., W. Harun and K., Kadirgama and D., Ramasamy and Farhana, K. (2021) Cotton waste research follows the effect of pre-treatment and the observation of physical appearance. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. , 1078 (012014). ISSN 1757-899X (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Devarajan, Ramasamy (2021) A short review of nano-cellulose preparation from textile spinning waste cotton. In: International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen. pp. 1-7.. ISBN 978-166541224-7 (Published)

Mahamude, Abu Shadate Faisal and Wan Sharuzi, Wan Harun and Kumaran, Kadirgama and Farhana, Kaniz and Ramasamy, D. and Samylingam, L. and Aslfattahi, Navid (2021) Thermal performance of nanomaterial in solar collector: State-of-play for graphene. Journal of Energy Storage, 42 (103022). pp. 1-16. ISSN 2352-152X. (Published)

Mahendran, Kugendran and Muhammad Hilmi, Jalil (2021) Finite element analysis of different spinal cage designs for posterior lumbar interbody fusion. In: International Exchange and Innovation Conference on Engineering and Sciences. 7th International Exchange and Innovation Conference on Engineering and Sciences, IEICES 2021 , 21 - 22 October 2021 , Fukuoka. pp. 51-57.. ISSN 2434-1436 (Published)

Mahfuzah, Mustafa and Zarith Liyana, Zahari and Rafiuddin, Abdubrani (2021) Optimal accuracy performance in music-based EEG signal using Matthew correlation coefficient advanced (MCCA). Jurnal Teknologi, 83 (6). pp. 53-61. ISSN 0127-9696. (Published)

Mahmood, Khalid and Rahmah, Mokhtar and Fauziah, Zainuddin and Nor Azhar, Ahmad and Noraziah, Ahmad and Norshita, MN (2021) The Impact of Exponent Variable on the Performance and Effectiveness of FCM Algorithm for Ontology Construction in Structured Knowledge Management. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 673-678.. ISBN 978-1-6654-1407-4 (Published)

Mahmood, Syed and Almurisi, Samah Hamed and AL-japairai, Khater Ahmed Saeed and Hilles, Ayah Rebhi and Alelwani, Walla and Bannunah, Azzah M. and Alshammari, Farhan and Alheibshy, Fawaz (2021) Ibuprofen-loaded chitosan–lipid nanoconjugate hydrogel with gum arabic: Green synthesis, characterisation, in vitro kinetics mechanistic release study and PGE2 production test. Gels, 7 (4). pp. 1-19. ISSN 2310-2861. (Published)

Mahyuddin, Ismail and Jahid, Sidek and Nurkarimah, Yusof (2021) Human sacrifice in witchcraft ritual: a need for the anti witchcraft law. Journal of Fatwa Management And Research, 26 (2). pp. 27-34. ISSN 2232-1047(Print); 0127-8886(Online). (Published)

Manda, M. S. and M. R. M., Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) Review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure. Materials and Applications, 1 . Springer Link, Singapore, pp. 43-58. ISBN 978-981-16-6382-6 (Printed); 978-981-16-6383-3 (Online)

Manimaharan, Malini and Suhaidah, Hussain and Muhammad Ashraf, Fauzi (2021) The Review of Automotive Industry in Malaysia: Good Governance Perspective. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (10). pp. 3902-3910. ISSN 1309-6591 |. (Published)

Maoqi, Li and M. I., Ishak and P. M., Heerwan (2021) Investigation on linear and nonlinear dynamic equation for vehicle model in numerical simulation. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-11., 1078 (012010). ISSN 1757-899X (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Investigation of wear performance of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1740-1744. ISSN 2214-7853. (Published)

Marini, C.D. and Fatchurrohman, Nanang and Zuhairah, Zulkfli (2021) Morphological study of friction stir processed aluminium metal matrix composites. Materials Today: Proceedings, 40 (4). pp. 1745-1748. ISSN 2214-7853. (Published)

Martin, Tulasi and Muhammad Ashraf, Fauzi and Nallaluthan, Kesavan and Balasundran, Komathy (2021) The Role of Manufacturing Exports in the Economic Development in Malaysia. International Journal of Academic Research in Economics and Management Sciences, 10 (2). pp. 92-109. ISSN 2226-3624. (Published)

Martin, Tulasi and Nallaluthan, Kesavan and Yankteshery, Vijiyan (2021) Assessing the output and productivity of manufacturing sector to the export in Malaysia. Qualitative and Quantitative Research Review, 6 (2). pp. 23-56. ISSN 2462-2117. (Published)

Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Chalermwisutkul, Suramate and Akkaraekthalin, Prayoot (2021) Ganoderma boninense disease detection by near-infrared spectroscopy classification: a review. Sensors, 21 (9). pp. 1-21. ISSN 1424-8220. (Published)

Mas Ira Syafila, Mohd Hilmi Tan and Mohd Faizal, Jamlos and Ahmad Fairuz, Omar and Fatimah, Dzaharudin and Mohd Azraie, Mohd Azmi and Mohd Noor, Ahmad and Nur Akmal, Abd. Rahman and Khairil Anuar, Khairi (2021) Near-infrared spectroscopy for ganoderma boninense detection in oil palm: An outlook. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer Nature, Singapore, pp. 117-126. ISBN 978-981-33-4597-3

Maziyana, Marzuki and Noor Mazni, Ismail and Muhammad Ihsan, Abdul Latiff (2021) Preparation and microstructural characterization of five-layered aluminium-aluminium oxide functionally graded material. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan, Pahang. pp. 1-9., 1092 (012031). ISSN 1757-899X (Published)

Mazlan, A. U. and Sahabudin, N. A. and Remli, M. A. and Ismail, N. S. N. and Mohamad, M. S. and Nies, H. W. and Warif, N. B. A. (2021) A review on recent progress in machine learning and deep learning methods for cancer classification on gene expression data. Processes, 9 (8). pp. 1-12. ISSN 2227-9717. (Published)

Md Noor, Ariffin and Mostafa, Tarek and Khan, Maksudur R. (2021) Photocatalytic degradation of organic pollutant using visible active - boron doped photocatalyst. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-8., 1092 (012062). ISSN 1755-1315 (Published)

Md Shofiqul, Islam and Sunjida, Sultana and Md Jabbarul, Islam (2021) New hybrid deep learning method to recognize human action from video. Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI), 7 (2). pp. 306-313. ISSN 2338-3070. (Published)

Megat Muhammad Afif, Megat Muainuddin (2021) Time arrival in series forecasting model for tourist National Park Kuala Tahan, Pahang. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mehmood Sajid, Muhammad Khalid and Hafizoah, Kassim and Al Fraidan, Abdullah and Adnan Hasan, Ghassan and Iqbal, Zafar and Aljarrah, Khaled and Al Anazi, Nawaf (2021) Effectiveness of reading aloud strategies on low proficiency Pakistani college level female students of English department from humanities group at higher secondary system: A teachers’ perception. Journal of Information Technology in Industry, 9 (1). pp. 1-12. ISSN 2203-1731. (Published)

Miah, M. Saef Ullah and Junaida, Sulaiman and Azad, Saiful and Kamal Z., Zamli and Rajan, Jose (2021) Comparison of document similarity algorithms in extracting document keywords from an academic paper. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 631-636.. (Published)

Miah, M. Saef Ullah and Junaida, Sulaiman and Talha, Sarwar and Kamal Z., Zamli and Jose, Rajan (2021) Study of keyword extraction techniques for electric double-layer capacitor domain using text similarity indexes: An experimental analysis. Complexity, 2021 (8192320). pp. 1-12. ISSN 1076-2787. (Published)

Ming, Chiam Tat and Muhammad Ikram, Mohd Rashid (2021) Type 2 electric vehicle charger compatible for single phase and three phase. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mirza Rizwan, Sajid (2021) Modeling of cardiovascular diseases (CVDs) and development of predictive heart risk score. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Noryanti, Muhammad).

Mirza Rizwan, Sajid and Noryanti, Muhammad and Ahmad, Shahbaz and Roslinazairimah, Zakaria (2021) A Statistical Study on the Prevalence of Physical inactivity among Cardiovascular Diseases patients: The Predictive role of Demographic and Socioeconomic Factors. Research Journal of Pharmacy and Technology (RJPT), 14 (7). pp. 3679-3684. ISSN 0974-360X (Online). (Published)

Mirza Rizwan, Sajid and Noryanti, Muhammad and Roslinazairimah, Zakaria and Ahmad, Shahbaz and Syed Ahmad Chan, Bukhari and Kadry, Seifedine and A., Suresh (2021) Nonclinical Features in Predictive Modeling of Cardiovascular Diseases: A Machine Learning Approach. Interdisciplinary Sciences: Computational Life Sciences, 13. pp. 201-211. ISSN 1913-2751. (Published)

Mohaimen-Bin-Noor, . and Ahmed, Zahiduddin and Rahman, M. (2021) Investigation of facilities for an m-learning environment. International Journal of Modern Education and Computer Science (IJMECS), 13 (1). 34 -48. ISSN 2075-0161. (Published)

Mohamad, N. and Khairunisa, Muthusamy and Ismail, M. A. (2021) Cockle shell as mixing ingredient in concrete: A review. Construction, 1 (2). pp. 9-20. ISSN 2785-8731. (Published)

Mohamad Hafidzul Rahman, Alias and Mohd Fadzil, Abdul Rahim and Rosli, Abu Bakar (2021) Optimization of CNG Direct Injector Parameters using model-based calibration framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 (1). Springer, Singapore, pp. 917-929. ISBN 978-981-33-4596-6 (Print) 978-981-33-4597-3 (Online)

Mohamad Hafiz, Mohd Fauzi and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Wan Hasbullah, Mohd Isa (2021) Articulated robot arm. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 57-64. ISSN 2637-0883. (Published)

Mohamad Ismail, Mohamad Isa and Siti Maizatul Ameera, Azhar and Nazikussabah, Zaharudin and Ahmad Salihin, Samsudin and Nurlin, Abu Samah (2021) Synthesis and characterization of cellulose modified surface to remove lead (II) from aqueous solution. Macromolecular Symposia, 397 (1). pp. 1-2. ISSN 1521-3900. (Published)

Mohamad Izuddin, Saikhon and Khairil Azman, Masri and Ahmad Kamil, Arshad and Muhammad Faris, Mohd Rizam and Shahnewaz, Shoaib Md. and Rashida, Ferdaus (2021) Evaluation of Flexible Pavement Distresses due to Undesirable Commercial Vehicles Activity. In: IEEE International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen (Virtual). pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)

Mohamad Mokhtar, Ibrahim and Zulkifly, Jemaat and Nour, Abdurahman Hamid (2021) Microbiota of a UASB Reactor Treating Palm Oil Mill Effluent Using HiSeq Sequencing. Materials Science Forum, 1025. pp. 169-176. ISSN 0255-5476. (Published)

Mohamad Mokhtar, Ibrahim and Zulkifly, Jemaat and Nour, Abdurahman Hamid (2021) Obtaining Bio-Hydrogen from Palm Oil Mill Effluent (POME) - A Preliminary Evaluation. Materials Science Forum, 1025. pp. 177-182. ISSN 0255-5476. (Published)

Mohamad Mokhtar, Ibrahim and Zulkifly, Jemaat and Nour, Abdurahman Hamid (2021) Performance and kinetic evaluation of palm oil mill effluent (POME) digestion in a continuous high rate up-flow anaerobic sludge blanket (UASB) bioreactor. Materials Science Forum, 1025. pp. 141-149. ISSN 1662-9752. (Published)

Mohamad Nazirul Mubin, Merzuki and Ma, Quanjin and Mohd Ruzaimi, Mat Rejab and Mohd Shahrir Mohd, Sani and Zhang, Bo (2021) Experimental and numerical investigation of fibre-metal-laminates (FMLs) under free vibration analysis. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 854-860., 48 (4). ISSN 2214-7853 (Published)

Mohamad Rusydi, Mohamad Yasin and S. N. A., Abdul Razak (2021) Effect of high temperature solution heat treatment time on quality index and morphology of A356 DC alloy. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1924-1928., 48. ISSN 2214-7853 (Published)

Mohamad Syafiq, Abdul Wahab and Alia Aqilah, Ghazali and Nurul Faizah, Abd Ghapar and Sunarti, Abd Rahman and Rozaimi, Abu Samah (2021) Thin film nanocomposite (Tfnc) membranes: Future direction of Tfnc synthesis for alcohol dehydration. Surfaces and Interfaces, 25 (101165). pp. 1-17. ISSN 2468-0230. (Published)

Mohamad Syaiful Izwan, Alies and Nur Zalikha, Khalil (2021) Effect of alumina/graphene hybrid nano reinforcement to the adhesion and mechanical properties of adhesively bonded aluminum alloy with epoxy. Materials Today: Proceedings, 51 (2). pp. 1437-1443. ISSN 2214-7853. (Published)

Mohamed, Abozar Atya and Bilal, Khalid Hamid and Elmutasima, Imadeldin Elsayed Mohamed Osman (2021) Face recognition by artificial neural network using MATLAB. In: 2021 IEEE 6th International Conference on Computing, Communication and Automation, ICCCA 2021. 6th IEEE International Conference on Computing, Communication and Automation, ICCCA 2021 , 17 - 19 December 2021 , Arad. pp. 686-690.. ISBN 978-166541473-9 (Published)

Mohammad, Abdul Jalil and Moniruzzaman, Md. and Parvez, Md. Shohan and Siddika, Ayesha and Abdul Gafur, Md. and Repon, Md. Reazuddin and Hossain, Md. Tanjim (2021) A novel approach for pineapple leaf fiber processing as an ultimate fiber using existing machines. Heliyon, 7 (8). pp. 1-9. ISSN 2405-8440. (Published)

Mohammad Affendy, Omardin (2021) The development building maintenance training model of healthcare industry. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad Hazim, Mohamad Hamdan (2021) Effect of laminated parameters on mechanical properties hybrid juteramie reinforced unsaturated polyester composite. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohammad I, AlBiajawi and Rahimah, Embong and Khairunisa, Muthusamy (2021) An overview of the utilization and method for improving pozzolanic performance of agricultural and industrial wastes in concrete. Materials Today: Proceedings. pp. 1-6. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Mohammad Naqiuddin Fahmi, Fathli and Zulkifli, Md. Yusof (2021) Implementation study of field programmable gate array (FPGA) and complex programmable logic device (CPLD) in collision avoidance system using vhsic hardware description language (VHDL). Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 52-60. ISSN 2637-0883. (Published)

Mohammad Waffy, Fazil and Lee, Chia Kuang and Puteri Fadzline, Muhamad Tamyez (2021) Cost estimation performance in the Construction Projects: A systematic review and future directions. International Journal of Industrial Management (IJIM), 11 (1). pp. 217-234. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Mohammed, Moseed and Awanis, Romli and Noormazlinah, Ahmad (2021) Eco-Ontology for supporting Interoperability in Product Life Cycle within Product Sustainability. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-11., 1092 (012049). ISSN 1757-899X (Published)

Mohammed, Moseed and Awanis, Romli and Rozlina, Mohamed (2021) Eco-design based on ontology: Historical evolution and research trends. In: AIP Conference Proceedings, Proceedings of Green Design and Manufacture 2020 , 23-24 July 2020 , Arau, Malaysia. pp. 1-4., 2339 (020166). ISBN 978-0-7354-4091-3 (Published)

Mohammed, Moseed Abdullah Yahia and Awanis, Romli and Rozlina, Mohamed (2021) Using ontology to enhance decision-making for product sustainability in smart manufacturing. In: International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2021. 2021 International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 2021 , 1 - 2 November 2021 , Virtual, Online. pp. 1-4.. ISBN 978-166543305-1 (Published)

Mohammed Adam, Kunna Azrag (2021) Enhanced segment particle swarm optimization for large-scale kinetic parameter estimation of escherichia coli network model. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Tuty Asmawaty, Abdul Kadir).

Mohd Aiman, Hamdan and Khairatun Najwa, Mohd Amin and Rajan, Jose and Martin, Darren and Fatmawati, Adam (2021) Tuning mechanical properties of seaweeds for hard capsules: A step forward for a sustainable drug delivery medium. Food Hydrocolloids for Health, 1 (100023). pp. 1-10. ISSN 2667-0259. (Published)

Mohd Aiman, Hamdan and Nur Hikmah, Sulaiman and Khairatun Najwa, Mohd Amin and Fatmawati, Adam (2021) Moisture content and mechanical properties reduction of hard capsules upon prolong drying process. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-11., 1092 (012057). ISSN 1757-899X (Published)

Mohd Aizat Ahlam, Mohamad Mokhtar and Wan Nur Syahidah, Wan Yusoff and Chuan, Zun Liang (2021) Robust hotelling's T2 statistic based on M-estimator. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28 - 29 July 2021 , Kuantan, Virtual. pp. 1-8., 1988 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Mohd Akmal, Azhar (2021) Product development and evaluation of probiotic tablet from locally isolated yeast saccharomycess boulardii for stomach acid tolerance. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Aufa Hadi, Putera Zaini and Mohd Mawardi, Saari and Nurul A’in, Nadzri and Zulkifly, Aziz (2021) A digital dual-phase lock-in amplifier for MFL and ECT NDT applications. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering , 23 August 2021 , Kuantan, Malaysia. pp. 989-997., 842. ISBN 978-981-16-8689-4 (Published)

Mohd Fadzil, Abdul Rahim (2021) Modelling and calibration of high-pressure direct injection compressed natural gas engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Aziz, B. Jaafar).

Mohd Faizan, Jamaluddin and Norazwina, Zainol and Nurul Shareena Aqmar, Mohd Sharifa (2021) Troubleshooting on biogas production by using factorial analysis in sewage treatment plant (STP). In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2020) , 6 August 2020 , Universiti Malaysia Pahang. pp. 1755-1762., 46 (4). ISSN 2214-7853 (Published)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli and M. Y. M., Yunus and M. S. I., Zaini and M. S., Wahap and A. M., Yasin and M. H., Sidik and M. A., Hezmi (2021) Application of Unmanned Aerial Vehicle (UAV) for Slope Mapping at Pahang Matriculation College, Malaysia. Physics and Chemistry of the Earth, Parts A/B/C. pp. 1-29. ISSN 1474-7065. (In Press / Online First) (In Press / Online First)

Mohd Fakhrurrazi, Ishak and Muhammad Farhan, Zolkepli and M. Y. M., Yunus and N., Ali and A., Kassim and M. S. I., Zaini (2021) The effect of tree water uptake on suction distribution in tropical residual soil slope. Physics and Chemistry of the Earth, Parts A/B/C, 121 (102984). pp. 1-7. ISSN 1474-7065. (Published)

Mohd Farid, Ismail and Azmi, W. H. and R., Mamat and Hamisa, A. H. (2021) Experimental investigation on Newtonian Behaviour and Viscosity of TiO2/PVE nanolubricants for application in Refrigeration System. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021) , 22-23 June 2021 , Kuala Lumpur, Malaysia (Virtual). pp. 1-11.. (Unpublished) (Unpublished)

Mohd Hafiz, Ali (2021) Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abdul Adam, Abdullah).

Mohd Hafiza, Abdul Kadir and Gebremariam, Mebrahitom Asmelash and Azmir, Azhari (2021) Investigation on welding distortion in stainless steel sheet using gas tungsten arc welding process. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1674-1679., 46 (Part 4). ISSN 2214-7853 (Published)

Mohd Hafizi, Zohari and Nur Ainaa Adhreena, Muhamad Shukri and Epin, Vorathin and Mohd Padzly, Radzi (2021) Smart bolt for digital bolted joint monitoring system. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Mohamad Zairi, Baharom and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) Non-Invasive Study: Monitoring the Heart Rate and SpO2 of the New Born using InfaWrap Device. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 1-6. (20611046). ISBN 978-1-7281-4246-3 (Published)

Mohd Hanafi, Abdul Rahim and Mohd Azrul Hisham, Mohd Adib and Mohamad Zairi, Baharom and Nur Hazreen, Mohd Hasni (2021) Improving the Infant-Wrap (InfaWrap) device for neonates using MyI-Wrap mobile application. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 239-248.. ISBN 978-981-16-0866-7 (Published)

Mohd Hasbi, Ab. Rahim and Ng, Pui Xin and Anisah Sajidah, Haji Saud and Mohd Asyrak, Deraman and Maniam, Gaanty Pragas (2021) Non-noble supported catalyst for oxidation of glucose under mild reaction conditions. Iranian Journal of Catalysis, 11 (1). pp. 23-35. ISSN 2252-0236. (Published)

Mohd Haslizam, Abdullah (2021) Development of an open-architecture temperature data logger for hydro-distillation agarwood oil extractor. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Hisyam, Mohd Ariff and Imran Saifullah, Ishak and Mohd Zamri, Ibrahim and Mohammad Fadhil, Abas and Rahimah, Jusoh and Shakib, Mohammed Nazmus and Waheb Abdul Jabbar, Shaif Abdullah and Razali, Muda (2021) An ultra high frequency 921 mhz array antenna for rfid reader. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Mohd Ikhmil Fadzrizan, Mohd Hanif and Ahmad, Mohd Ashraf and Jui, Julakha Jahan (2021) PID Tuning Method Using Chaotic Safe Experimentation Dynamics Algorithm for Elastic Joint Manipulator. Journal Europeen des Systemes Automatises, 54 (5). pp. 693-698. ISSN 1269-6935. (Published)

Mohd Ishanuddin, N. and Sukadarin, Ezrin Hani and Mohd Nawi, N. S. and Widia, Mirta and Ab Rashid, A. A. and H. A., Aziz and Junaidah, Zakaria and Fauzan, N. S. and Osman, H. and Roslin, E. N. and Jawi, Z. M. and Yassierli, . (2021) Consumers' perception of automatic emergency braking (AEB): Theoretical model and construct development. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 206-222. ISSN 2550-2239. (Published)

Mohd Izham, Mohd Jaya and Goh, Xin Tong and Mohd Faizal, Ab Razak and Azlee, Zabidi and Syifak Izhar, Hisham (2021) Geofence alerts application with GPS tracking for children monitoring (CTS). In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 222 -226.. ISBN 9781665414074 (Published)

Mohd Jim, Hamzah (2021) Pembangunan standard pengukuran untuk mengesan gangguan makhluk halus berdasarkan kaedah pengubatan Islam. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Mokhtarishah, Mohamed Mokhtar and Hasmadi, Hassan (2021) Pengaruh faktor persepsi negatif dan budaya tular terhadap buli siber di media sosial dalam kalangan pelajar dan golongan muda. International Journal of Humanities Technology and Civilization (IJHTC), 1 (11). pp. 16-36. ISSN 2289-7216, 2600-8815 (Online). (Published)

Mohd Najib, Razali and Alkaf, Alawi Abdulqader A. and Mohd Khairul Nizam, Mohd Zuhan (2021) Formulation of water-based white colour paint from waste titanium dioxide. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1905-1909., 48 (6). ISSN 2214-7853 (Published)

Mohd Najib, Razali and Aseel, Alhammadi and Musfafikri, Musa and Mohd Khairul Nizam, Mohd Zuhan and Amira Ermafiqka, Anuar (2021) Comparison of natural adsorbent for emulsified wastewater treatment. In: The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , Pekan Pahang , 22-23 December 2020. pp. 1-9., 1092. (Published)

Mohd Nazir, Mat Nawi and Hafiz, Husin and Gebremariam, M. A. and Azmir, Azhari (2021) Optimisation of paint removal operation using waterjet cleaning process. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. Lecture Notes in Mechanical Engineering. Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan. pp. 485-494., 46. ISBN 978-981-15-9505-9 (Published)

Mohd Noor Firdaus, Haron (2021) Parametric study of laser marking process using grey taguchi method utilizing fiber laser system for aisi 304 stainless steel. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Rahimi, Ramli and Norasiah, Abd Razak and Izwan, Ismail and Ahmad Shahir, Jamaludin and Ahmad Rosli, Abdul Manaf (2021) Effect of Dimple Size onto Wear Rate of Mild Steel AISI 1060 Surface. In: The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) , 23 November 2021 , Virtual Conference. pp. 1-4.. (Published)

Mohd Rasmawi, Harun and Mohamad Hilmi, Mat Said (2021) Pembangunan garis panduan pemuliharaan masjid lama Negeri Pahang. International Journal of Humanities Technology and Civilization (IJHTC), 1 (10). pp. 93-106. ISSN 2289-7216. (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli (2021) Performance characteristics of a small poppet valve crankshaft engine in free-piston engine mode. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). 9149 -9157. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Mohd Razali, Hanipah and M. Haziq Adham, Rosli and A. R., Razali (2021) A new piston referencing algorithm for qualitative assessment of free-piston engine generator performance. In: Lecture Notes in Mechanical Engineering; Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020 , 6 August 2020 , Pekan, Malaysia. pp. 935-948., 46. ISSN 2195-4356 (Published)

Mohd Rosdi, Salleh (2021) Thermophysical and optimization of performance and emission of turbocharged si engine using gasoline, ethanol and fusel oil blends. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Ruslim, Nooradelena and Elizabeth, Marta and Yusof, Yuhani and Mohamad, Mohd Sham and Adzhar, Noraziah (2021) Deoxyribonucleic acid (DNA) splicing system from graph theoretic perspective. In: Journal of Physics: Conference Series; Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28 - 29 July 2021 , Kuantan, Pahang. pp. 1-9., 1988 (012081). ISSN 1742-6596 (Published)

Mohd Shahril, Abu Hanifah (2021) The prevalence of fatigue and the effectiveness of fatigue risk intervention on safety performance among shift workers in electronics manufacturing industry in Malaysia. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mohd Shahrul, Md Jusob and Yasmin, Abdul Wahab and Leow, Pei Ling and Ruzairi, Abdul Rahim and Suzanna, Ridzuan Aw and Juliza, Jamaludin and Nurhafizah, Abu Talip Yusof and Rohana, Abdul Karim and Nor Farizan, Zakaria and Nurul Wahidah, Arshad and Mohd Mawardi, Saari and Zainah, Md. Zain and Mohd Anwar, Zawawi (2021) Initial study of invasive approach of electrical capacitance tomography for identifying non-conducting medium in steel pipe application. Journal of Electrical Engineering, 20 (2-3). pp. 107-110. ISSN 0128-4428. (Published)

Mohd Yuhyi, Mohd Tadza and Tengku Hafidatul Husna, Tengku Anuar and Fadzil, Mat Yahaya and Rahisham, Abd Rahman (2021) Performance of graphite and activated carbon as electrical grounding enhancement material. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Gambang Campus, Kuantan, Pahang, Malaysia. pp. 1139-1154., 666. ISBN 978-981-15-5281-6 (Published)

Mohd Zulfadli, Mat Husin and Noor Raha, Mohd Radzuan (2021) Identifying English language needs among administrative support staff in a Malaysian Public University: A preliminary study. English Language Teaching Educational Journal, 4 (3). pp. 199-212. ISSN 2621-6485. (Published)

Mohd. Amirul Hilmi, Mohd Hanoin and Nor Amirah Safiah, Muhamad and Nadzirah, Mohd Mokhtar and Amir, Abdul Razak and Muhamad Sukri, Hadi (2021) Effect of design parameters of serpentine-shaped flat plate solar collector under Malaysia climate conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (1). pp. 71-80. ISSN 2289-7879. (Published)

Moseed, Mohammed and Awanis, Romli and Rozlina, Mohamed (2021) Existing semantic ontology and its challenges for enhancing interoperability in IoT environment. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan, Pahang, Malaysia. pp. 22-26.. ISBN 978-166541407-4 (Published)

Moshiul Alam, A. K. M. and Beg, M. D. H. and R. M., Yunus and Islam, M. R. and Shubhra, Quazi T. H. (2021) Tailoring the dispersibility of non-covalent functionalized multi-walled carbon nanotube (MWCNT) nanosuspension using shellac (SL) bio-resin: Structure-property relationship and cytotoxicity of shellac coated carbon nanotubes (SLCNTs). Colloid and Interface Science Communications, 42 (100395). pp. 1-9. ISSN 2215-0382. (Published)

Moshood, Taofeeq D. and Adeleke, A. Q. and Nawanir, Gusman and Sorooshian, Shahryar and Ajibike, W. A. (2021) “I want to serve, but the public does not understand”—An approach to employees’ intention to stay in the Malaysian construction companies. Applied System Innovation, 4 (1). pp. 1-22. ISSN 2571-5577. (Published)

Moshood, Taofeeq D. and Nawanir, Gusman and Fatimah, Mahmud and Sorooshian, Shahryar and Adeleke, A. Q. (2021) Green and low carbon matters: A systematic review of the past, today, and future on sustainability supply chain management practices among manufacturing industry. Cleaner Engineering and Technology, 4 (100144). pp. 1-15. ISSN 2666-7908. (Published)

Moshood, Taofeeq D. and Nawanir, Gusman and Sorooshian, Shahryar and Okfalisa, Okfalisa (2021) Digital twins driven supply chain visibility within logistics: A new paradigm for future logistics. Applied System Innovation, 4 (2). pp. 1-24. ISSN 2571-5577. (Published)

Moshood, Taofeeq D. and Sorooshian, Shahryar (2021) The physical internet: A means towards achieving global logistics sustainability. Open Engineering, 11 (1). 815 -829. ISSN 2391-5439. (Published)

Most. Julakha, Jahan Jui (2021) Identification of continuous-time model of hammerstein system using modified multi-verse optimizer. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Mubarokah, Bunyamin and Norwazli, Abdul Wahab (2021) Factors influencing financial risk tolerance: A review. International Journal of Industrial Management (IJIM), 12 (1). 296 -305. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Muhamad, N. A. S. and Hanoin, M. A. H. M. and Nadzirah, Mohd Mokhtar and Rosmawati, Naim (2021) Insights into membrane distillation application for textile wastewater treatment – A review. Journal of Applied Membrane Science & Technology, 25 (3). pp. 29-51. ISSN 2600-9226. (Published)

Muhamad Faruqi, Zahari and Muhammad Sharfi, Najib and Suhaimi, Mohd Daud and Mujahid, Mohamad and Nur Farina, Hamidon Majid (2021) Performance measure of case based reasoning (CBR) for ammonia in water by specific concentration. In: The 6th International Conference on Electrical, Control and Computer Engineering (InECCE2021) , 23 August 2021 , Microsoft Team Platforms. pp. 1-13.. (In Press / Online First) (In Press / Online First)

Muhamad Hamam, Iqbal and Wahyu, Sapto Aji (2021) Wall following control system with pid control and ultrasonic sensor for KRAI 2018 robot. International Journal of Robotics and Control, 1 (1). pp. 1-14. ISSN 2775-2658. (Published)

Muhamad Rozikin, Kamaluddin and M. F. F., Ab Rashid (2021) Modelling and Optimization of Asymmetric Vehicle Routing Problem Using Particle Swarm Optimization Algorithm. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 49-58.. ISBN 978-981-15-9505-9 (Published)

Muhamad Soffi, Manda and Mohd Ruzaimi, Mat Rejab and Shukur, Abu Hassan and Quanjin, Ma (2021) A review on tin slag polymer concrete as green structural material for sustainable future. In: Green Infrastructure : Materials and Applications. Springer Nature, pp. 43-58. ISBN 978-981166383-3, 978-981166382-6

Muhamad Zulhilmi, Ismail (2021) Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohamad Heerwan, Peeie).

Muhammad, Aisha and Ali, Mohammad A.H. and Shanono, Ibrahim Haruna (2021) A review : On intelligent mobile robot path planning techniques. In: ISCAIE 2021 - IEEE 11th Symposium on Computer Applications and Industrial Electronics. 11th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2021 , 3 - 4 April 2021 , Penang. pp. 53-58. (9431819). ISBN 978-166540338-2 (Published)

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) Analysis of a 440C steel roller bearing using finite element method. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1750-1754., 44. ISSN 2214-7853 (Published)

Muhammad, Aisha and Ali, Mohammed A. H. and Shanono, Ibrahim Haruna and Abdullah, Nor Rul Hasma (2021) A systematic and bibliometric analysis on 3D printing published in scientific citation index-expanded indexed journals between 1999 and 2019. In: Materials Today: Proceedings; 11th International Conference on Materials Processing and Characterization , 15 - 17 December 2020 , Indore, India. pp. 1739-1743., 44 (168673). ISSN 2214-7853 (Published)

Muhammad, Nurmunira and Siddiqua, Sumi (2021) Calcium bentonite vs sodium bentonite : The potential of calcium bentonite for soil foundation. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 822-827., 48 (176046). ISSN 2214-7853 (Published)

Muhammad Aizat, Azed (2021) Performance of concrete containing microwaved sewage sludge ash as additional material. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Akram Ramadhan, Ibrahim and Nor Izzati, Jaini and Ku Muhammad Naim, Ku Khalif (2021) A comprehensive review of hybrid game theory techniques and multi-criteria decision-making methods. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28 - 29 July 2021 , Kuantan, Virtual. pp. 1-21., 1988 (012056). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Muhammad Akram Ramadhan, Ibrahim and Nor Izzati, Jaini and Ku Muhammad Naim, Ku Khalif (2021) A shapley trade-off ranking method for multi-criteria decision-making with defuzzification characteristic function. International Journal of Applied Mathematics, 34 (5). 933 -955. ISSN 1311-1728. (Published)

Muhammad Amin, Harun and Zafri Azran, Abdul Majid and Zairul Azrul, Zakaria and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Ahmad Fadzil, Sharol and Amir, Abdul Razak (2021) Study on selection of a suitable material and the parameters for designing a portable flat plate base-thermal cell absorber (FPBTCA). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 71-92. ISSN 2289-7879. (Published)

Muhammad Amirul, Abdullah and Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Aizzat, Zakaria and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Noor Azuan, Abu Osman and Anwar P.P., Abdul Majeed (2021) The classification of skateboarding tricks via transfer learning pipelines. PeerJ Computer Science. pp. 1-18. ISSN 2376-5992. (Published)

Muhammad Ar Rahim, Ibrahim and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Anwar P. P., Abdul Majeed (2021) The classification of skateboarding tricks: A support vector machine hyperparameter evaluation optimisation. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering, 730 . Springer Singapore, Singapore, pp. 1013-1022. ISBN 978-981-33-4596-6 (Printed) 978-981-33-4597-3 (Online)

Muhammad Arieffuddin, Mohd Jamil and Fadhlur Rahman, Mohd Romlay and Khairul Fikri, Muhammad and Shamsudin, Abdul Samat and Ismayuzri, Ishak (2021) Pressure based control for a variable speed diesel engine driven pump controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 65-69. ISSN 2637-0883. (Published)

Muhammad Arif, Mohamad and Jamaludin, Sallim and Kohbalan, Moorthy (2021) Whale Optimisation Freeman Chain Code (WO-FCC) extraction algorithm for handwritten character recognition. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 598-602.. ISBN 978-1-6654-1407-4 (Published)

Muhammad Ashraf, Fauzi and Siti Aminah, Harun and Tulasi, Martin and Norazha, Paiman and Mohamed Saiful Firdaus, Hussin (2021) Smartphone addiction among young adolescents: Integration of flow theory and fear of missing out. International Journal of Information and Management Sciences (IJIMS), 32. pp. 39-58. ISSN 1017-1819. (Published)

Muhammad Ashraf, Fauzi and Tulasi, Martin (2021) The influence of transformational leadership on Malaysian students’ entrepreneurial behaviour. Entrepreneurial Business and Economics Review, 9 (1). pp. 89-103. ISSN eISSN 2353-8821. (Published)

Muhammad Asyraf, Abdullah and Siti Rabiatull Aisha, Idris (2021) Effect of Different Nickel Percentage in Solder Alloy towards Intermetallic Compound Formation and Growth. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-9., 1092 (012012). ISSN 1757-899X (Published)

Muhammad Azim Anwar, Noor Hisham (2021) Synthesis and characterisation of graphene and its corrosion resistance on magnesium alloys. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Azizur Rahman, Ramli (2021) Pembangunan model sukuk di Malaysia berasaskan maqasid syariah : rujukan kepada Majallah Ahkam Al-Adliyyah. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mansor, Sulaiman).

Muhammad Fahmi, Ahmad Zuber and Norhayati, Rosli (2021) Comparative study of stochastic Taylor methods and derivative-free methods for stochastic differential equations. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-11., 1988 (012005). ISSN 1742-6588 (Published)

Muhammad Fahmi, Ahmad Zuber and Norhayati, Rosli and Noryanti, Muhammad (2021) The transmission dynamic of the COVID 19 outbreak: A predictive dashboard. Sains Malaysiana, 50 (11). pp. 5011-5026. ISSN 0126-6039. (Published)

Muhammad Faris, Ramli and Khairil Azman, Masri and Ahmad Kamil, Arshad and Mohamad Izuddin, Saikhon and Shoaib, Md Shahnewaz (2021) Assessing surface defects of flexible pavement at parking lot due to undesirable commercial activities. In: IEEE International Congress of Advanced Technology and Engineering (ICOTEN 2021) , 4-5 July 2021 , Taiz, Yemen (Virtual). pp. 1-6.. ISBN 978-1-6654-1224-7 (Published)

Muhammad Fuad, Abdullah (2021) Frame selection based on modified entropy and object motion for secured data hiding in videos. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ferda, Ernawan).

Muhammad Hanafi, Yusop and Ghazali, M. F. and Mohd Fadhlan, Mohd Yusof and Muhammad Aminuddin, Pi Remli (2021) Pipeline condition assessment by instantaneous frequency response over hydroinformatics based technique—An experimental and field analysis. Fluids, 6 (11). pp. 1-29. ISSN 2311-5521. (Published)

Muhammad Izzat, Zakaria and Waheb, A. Jabbar (2021) Flood monitoring and warning systems: A brief review. Journal of Southwest Jiaotong University, 56 (3). pp. 140-156. ISSN 0258-2724. (Published)

Muhammad K. A., Saienudin and M. F. F., Ab Rashid (2021) A study of parallel machine scheduling in an electronic industry using heuristics approach. In: The 2nd International Conference on Technology, Engineering and Sciences (ICTES 2021) , 3 - 4 April 2021 , Langkawi, Kedah & Online Conference. pp. 1-5., 2401 (1). (Published)

Muhammad Khairul Anuar, Mohamed and Hussanan, Abid and Alkasasbeh, Hamzeh Taha and Widodo, Basuki and Mohd Zuki, Salleh (2021) Boundary layer flow on permeable flat surface in Ag-Al2O3/Water hybrid nanofluid with viscous dissipation. Data Analytics and Applied Mathematics (DAAM), 2 (1). pp. 11-19. ISSN 2773-4854. (Published)

Muhammad Khairul Anuar, Mohamed and Mohd Zuki, Salleh and Fadhilah, Che Jamil and Ong, Huei Ruey (2021) Free convection boundary layer flow over a horizontal circular cylinder in Al2O3-Ag/water hybrid nanofluid with viscous dissipation. Malaysian Journal of Fundamental and Applied Sciences, 17 (1). pp. 20-25. ISSN 2289-5981. (Published)

Muhammad Khairul Anuar, Mohamed and Siti Hanani, Mat Yasin and Mohd Zuki, Salleh (2021) Slip Effects on MHD Boundary Layer Flow over a Flat Plate in Casson Ferrofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (1). pp. 49-57. ISSN 2289-7879. (Published)

Muhammad Khairul Anuar, Mohamed and Siti Hanani, Mat Yasin and Mohd Zuki, Salleh and Alkasasbeh, Hamzeh Taha (2021) MHD stagnation point flow and heat transfer over a stretching sheet in a blood-based casson ferrofluid with newtonian heating. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 1-11. ISSN 2289-7879. (Published)

Muhammad Nor, Arifin and Rasidi, Roslan and Nurjannah, Salim and Siti Noor Hidayah, Mustapha and Sarani, Zakaria and Chin-Hua, Chia and Mohd Shaiful, Sajab (2021) Effect of catalysts on the yield and properties of lignin form microwavedassisted acetosolve extraction of oil palm empty fruit bunch fibres. Journal Of Oil Palm Research, 33 (1). pp. 74-83. ISSN 1511-2780. (Published)

Muhammad Nor Arifin, Yaakob and Rasidi, Roslan and Nurjannah, Salim and Sarani, Zakaria (2021) Comparison of phenol-formaldehyde and lignin-formaldehyde resin adhesives for wood application. Materials Science Forum, 1025. pp. 307-311. ISSN 1662-9752. (Published)

Muhammad Nor Arifin, Yaakob and Rasidi, Roslan and Nurjannah, Salim and Siti Noor Hidayah, Mustapha (2021) Structural and thermal behavior of lignin-based formaldehyde-free phenolic resin. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology 2021 , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1388-1391., 51 (Part 2). ISSN 2214-7853 (Published)

Muhammad Nor Azril, Zulkafli and Norazlianie, Sazali and Saiful Anwar, Che Ghani and Maurice, Kettner (2021) Investigation on an innovative hydrocarbon sensor for real drive emissions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (2). pp. 39-49. ISSN 2289-7879. (Published)

Muhammad Nor Fazli, Abd Malek and Livitra, Pushparaja and Noraini, Mat Hussin and Nurul Hajar, Embong and Bhuyar, Prakash and Mohd Hasbi, Ab. Rahim and Maniam, Gaanty Pragas (2021) Exploration of efficiency of nano calcium oxide (CaO) as catalyst for enhancement of biodiesel production. Journal of Microbiology, Biotechnology and Food Sciences, 11 (1). pp. 1-4. ISSN 1338-5178. (Published)

Muhammad Nor Syahrul, Zaimi and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Abdul Muiz, Hasim and Nurul Natasha, Nasrudin (2021) Behavior on the mechanical performance and scanning electron microscopy of coal waste brick. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1816-1820., 48 (6). ISSN 2214-7853 (Published)

Muhammad Nubli, Abdul Wahab and Norshafariza, Mamat and Noryanti, Muhammad (2021) Kajian profil pencapaian matematik pelajar-pelajar sekolah rendah luar bandar dengan prestasi hati-HRV. International Journal of Humanities Technology and Civilization, 3 (10). pp. 91-108. ISSN 2600-8815 (Online) 2289-7216 (Printed). (Published)

Muhammad Nur Aiman, Shapiee (2021) The classification of skateboarding trick images by means of transfer learning and machine learning models. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Ridzuan, Kamaruzaman (2021) Investigation of reaction parameters and kinetics for the synthesis of sorbitol-branched azelaic acid ester. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Muhammad Shabir, Shaharudin and Wahida Najiha, Zulkifli and Gui, Anderes and Fernando, Yudi (2021) Drivers human resources 4.0: Technological, organisational & environmental of human resources 4.0 at Malaysian private companies. International Journal of Industrial Management (IJIM), 12 (1). 306 -318. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Muhammad Syafi’i, Mass Duki and Muhammad Nur Aiman, Shapiee and Muhammad Amirul, Abdullah and Ismail, Mohd Khairuddin and Mohd Azraai, Mohd Razman and Anwar P. P., Abdul Majeed (2021) The classification of taekwondo kicks via machine learning: A feature selection investigation. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 61-67. ISSN 2637-0883. (Published)

Muhammad Syamsul Imran, Zaini and Muzamir, Hasan and Muhammad Farhan, Zolkepli (2021) Urban landfills investigation for leachate assessment using electrical resistivity imaging in Johor, Malaysia. Environmental Challenges, 6 (100415). pp. 1-10. ISSN 2667-0100. (Published)

Muhammad Umar, Ab Aziz and Junaida, Sulaiman (2021) Umpcare counselling system using ionic angular. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Munir Afnan, Mukhtar and R. A., Bakar and Mohd Farid, Zainudin (2021) Thermodynamic analysis of a gamma-configuration stirling engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 114-126. ISSN 2289-7879. (Published)

Munirah Ezzah, Tuan Zakaria and Saidatul Shima, Jamari and Suriati, Ghazali (2021) Synthesis of superabsorbent carbonaceous kenaf fibre filled polymer via inverse suspension polymerisation. Journal of Mechanical Engineering and Sciences (JMES), 11 (3). pp. 1-8. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Murad, Saydul Akbar and Zafril Rizal, M Azmi and Abu Jafar, Md Muzahid and Al-Imran, Md. (2021) Comparative study on job scheduling using priority rule and machine learning. In: 2021 2021 Emerging Technology in Computing, Communication and Electronics, ETCCE 2021 , 21-23 December 2021 , Dhaka, Bangladesh. pp. 1-8.. ISBN 978-166548364-3 (Published)

Murad, Saydul Akbar and Zafril Rizal, M Azmi and Zaid Hafiz, Hakami and Prottasha, Nusrat Jahan and Kowsher, Md (2021) Computer-aided system for extending the performance of diabetes analysis and prediction. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. 465 -470.. ISBN 978-166541407-4 (Published)

Muryadi, I. S. and Yaakob, M. N. A. and Rasidi, Roslan (2021) The extraction of lignin from empty fruit bunch fiber via microwave-assisted deep-eutectic solvent heating. Current Science and Technology (CST), 1 (2). pp. 18-25. (Published)

Mustapha, Siti Noor Hidayah and Md Nizam, Muhd Nazrin and Mohamad Isa, Mohamad Ismail and Roslan, Rasidi and Mustapha, Rohani (2021) Synthesis and characterization of hydrophobic properties of silicon dioxide in palm oil based bio-coating. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1415-1419., 51. ISSN 2214-7853 (Published)

Muzamir, Hasan and M. S. I., Zaini and A. S., Zulkafli and Abdul, Wahab and Hokabi, A. A. and K. A., Masri and Putra Jaya, Ramadhansyah and Winter, M. J. and Hyodo, Masayuki and Sholichin, M. and Riyanto, Haribowo and M. S., Zulkafli (2021) Geotechnical properties of bauxite: A case study in Bukit Goh, Kuantan, Malaysia. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection, ICWRDEP 2021 , 7 August 2021 , Malang, Virtual. pp. 1-7., 930 (012098). ISSN 1755-1315 (Published)

Muzamir, Hasan and M. S. I., Zaini and N. A. A., Hashim and Wahab, A. and K. A., Masri and Putra Jaya, Ramadhansyah and Hyodo, M. and Winter, M. J. and Sholichin, M. and Haribowo, R. (2021) Stabilization of kaolin clay soil reinforced with single encapsulated 20mm diameter bottom ash column. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection (ICWRDEP 2021) , 7 August 2021 , Malang, Indonesia (Virtual). pp. 1-9., 930 (012099). ISSN 1755-1315 (Published)

Muzamir, Hasan and M. S. I., Zaini and N. A. W., Hong and Abdul, Wahab and K. A., Masri and Putra Jaya, Ramadhansyah and Hyodo, M. and Winter, M. J. and Sholichin, M. and Haribowo, R. (2021) Sustainable ground improvement method using encapsulated polypropylene (PP) column reinforcement. In: IOP Conference Series: Earth and Environmental Science; 4th International Conference of Water Resources Development and Environmental Protection (ICWRDEP 2021) , 7 August 2021 , Malang, Indonesia (Virtual). pp. 1-9., 930 (012016). ISSN 1755-1315 (Published)

Muzamir, Hasan and Muhammad Syamsul Imran, Zaini and Ling, Sin Yie and Khairil Azman, Masri and Putra Jaya, Ramadhansyah and Hyodo, Masayuki and Winter, Michael James (2021) Effect of Optimum Utilization of Silica Fume and Eggshell Ash to the Engineering Properties of Expansive Soil. Journal of Materials Research and Technology, 14. pp. 1401-1418. ISSN 2238-7854. (Published)

N

N A, Damanhuri and Syafikah, Ayob and I S, Sabri (2021) Numerical construction of deformation field in converging channel. Journal of Physics: Conference Series, 1988 (012023). pp. 1-8. ISSN 1742-6588 (Print); I1742-6596 (Online). (Published)

N., Abdul Wahab and Fatchurrohman, Nanang and Z., Zulkfli (2021) Investigation on the effect of different friction stir machining tools shape on the mechanical properties of magnesium alloy work piece. In: IOP Conference Series: Earth and Environmental Science; 9th Engineering International Conference, EIC 2020 , 24 September 2020 , Semarang, Indonesia. pp. 1-9., 700 (1). ISSN 1755-1307 (Published)

N., Jamil and M. F., Hassan and S. K., Lim and A. R., Yusoff (2021) Predictive maintenance for rotating machinery by using vibration analysis. Journal of Mechanical Engineering and Sciences (JMES), 15 (3). 8289 -8299. ISSN 2231-8380 (online). (Published)

N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Performance of Ocean Thermal Energy Conversion Closed Rankine Cycle Using Different Working Fluids. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. pp. 1-12., 1062 (012040). ISSN 1757-899X (Published)

N., Samsuri and Norazlianie, Sazali and Ahmad Shahir, Jamaludin and M. N. M., Razali (2021) Techno-economic efficiencies and environmental criteria of Ocean Thermal Energy Conversion closed Rankine cycle using different working fluids. In: IOP Conference Series: Materials Science and Engineering, International Colloquium on Computational & Experimental Mechanics (ICCEM 2020) , 25-26 June 2020 , Selangor, Malaysia. , 1062 (012042). ISSN 1757-899X (Published)

N., Zainol and Sidek, N. S. M. and Ya’acob, A. (2021) Production of high strength bioliquid from municipal solid waste (MSW) using mixed culture. In: IOP Conference Series: Materials Science and Engineering; 1st International Conference on Electrical Energy and Power Engineering (ICEEPE 2020) , 25 -26 August 2020 , Penang, Malaysia. pp. 1-11., 1045 (1). ISSN 1757-899X (Published)

N. A., Alang and J., Alias and Z., Sajuri and S., Nur Atiqah (2021) Finite Element Modelling of Creep Rupture on Grade 91 Steel using Monkman-Grant Ductility based Damage Model. International Journal of Integrated Engineering, 13 (7). pp. 108-118. ISSN 2229-838X (Print); 2600-7916 (Online). (Published)

N. E. H., Zamiruddin and A. S. A., Sani and N., Rosli (2021) Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-10., 1092 (012029). (Published)

N. F., Ab Ghani and M. S. Z., Mat Desa and M., Bijarimi (2021) The evaluation of mechanical properties graphene nanoplatelets reinforced polylactic acid nanocomposites. In: Materials Today: Proceedings, International Conference of Chemical Engineering & Industrial Biotechnology (ICCEIB 2020) , 9-11 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 283-287., 42 (Part 1). ISSN 2214-7853 (Published)

N. H., Rushan and N. H., Mat Yasin and F. M., Said (2021) The effect of culture medium on the oil yield and fatty acid methyl ester of freshwater microalgae chlorella vulgaris. Chemical Engineering Communications, 208 (4). pp. 592-600. ISSN 0098-6445 (print); 1563-5201 (online). (Published)

N. H. K., Anuar and Mohd Nizar, Mhd Razali and Mohamad Rusydi, Mohamad Yasin and Musfirah, Abdul Hadi and Abdul Nasir, Abd Ghafar (2021) Custom centrifugal pump performance in supplying high viscos liquid. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 80-88. ISSN 2636-9575. (Published)

N. I., N. Ismai and Haryati, Awang and N. Z., Mohd Yunus and Suriyati, Saleh (2021) Physiochemical characterization of lateritic bauxite mining soil. In: 12th International Conference on Geotechnical Engineering In Tropical Regions: Fostering Future Through Geotechnical, Sustainable Engineering and Technology & 2nd International Conference on Highway and Transportation Engineering: Empowering Transportatio , 17-18 August 2018 , Kuantan, Pahang, Malaysia. pp. 1-7., 971. ISSN 1755-1307 (Print); 1755-1315 (Online) (Published)

N. M., Adam and A., Irawan (2021) Adaptive Torque-based Vehicle Slip Control using Super-twisting Theorem for Steering Vehicle Control on Cornering Road. In: The 21st International Conference on Control, Automation and Systems (ICCAS 2021) , 12-15 October 2021 , Ramada Plaza Hotel, Jeju, Korea. pp. 1-6.. (Published)

N. M., Adam and Addie, Irawan (2021) Modeling and Analysis of Omnidirectional Wheeled Vehicles Using Velocity-based Impedance Control. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2021) , 20 September 2021 , Universiti Malaysia Pahang (Virtual). pp. 1-10.. (Unpublished) (Unpublished)

N. N. A., Rahman and Nafrizuan, Mat Yahya (2021) A mathematical model of a brushed DC motor system. Data Analytics and Applied Mathematics (DAAM), 2 (2). pp. 60-68. ISSN 2773-4854. (Published)

N. Q., Radzuan and Mohd Hasnun Ariff, Hassan and Khairil Anwar, Abu Kassim and Ahmad Azad, Ab. Rashid and Intan Suhana, Mohd Razelan and Nur Aqilah, Othman (2021) The influence of socio-demographics background on the driving behavior A short review. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 194-205. ISSN 2550-2239. (Published)

N. S., Razak and Rahmah, Mokhtar (2021) The Anxiety of Parent to the Prolong Computer Games Interaction: A Survey. In: Embracing Industry 4.0: Selected Articles from MUCET 2019 , 19-22 November 2019 , Kuantan, Pahang, Malaysia. pp. 105-113., 678. ISBN 978-981-15-6025-5 (Published)

N. S., Romali and N. S., Othman and N. N., Mhd Ramli (2021) The application of green roof for stormwater quantity and quality improvement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Virtual. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)

N.A.Z., Abdullah and M. S. M., Sani and Salwani, Mohd Salleh (2021) Study of modal properties and crashworthiness performance of crash box numerical model with different joining modelling strategies. In: IOP Conference Series: Materials Science and Engineering; 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020 , 25 - 26 June 2020 , Selangor. pp. 1-12., 1062 (1). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Nabilah, Mamat (2021) Effect of chemically pretreated paper mill sludge ash on the properties of geopolymer mortar. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nadiah, Mokhtar (2021) Biosorption of methylene blue dye using seaweed biomass. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: A. Aziz, Edriyana).

Nadiatul Adilah, Ahmad Abdul Ghani and M., Lukman (2021) Trend of bed load material and bed load transport in Sungai Kenau for year 2013 until 2020. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (1). ISSN 1755-1307 (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Muhammad Syukri, L. (2021) Determination of presence iron and manganese in Tasik Chini. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-10., 682 (1). ISSN 1755-1307 (Published)

Nadiatul Adilah, Ahmad Abdul Ghani and Siti Aisyah, Zakaria and Putra Jaya, Ramadhansyah and Noram Irwan, Ramli and Mahyun, A. W. (2021) Relationship between WQI, heavy metal and sedimentation in Sg Kenau, Kuantan, Pahang using WQ-HeMeS Model. In: IOP Conference Series: Earth and Environmental Science, 3rd International Conference on Civil and Environmental Engineering , 18 November 2020 , Malaysia. pp. 1-12., 646 (012066). ISSN 1755-1315 (Published)

Nadzri, N. A. and Mohd Mawardi, Saari and Zaini, M. A. H. P. and Aziz, Z. A. (2021) Referencing technique for phase detection in Eddy current evaluation. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8608 -8616. ISSN 2231-8380 (online). (Published)

Nahla Mohammedelzein, Elawad Babiker (2021) Join query enhancement processing (jqpro) with big rdf data on a distributed system using hashing-merge join technique. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Naidu Sanderasagran, Ashwindran and Abd Aziz, Azizuddin and Nurye Oumer, Ahmed (2021) Study of √2 conjecture in the construction of drag induced wind turbine blade morphology. Evergreen, 8 (3). pp. 574-585. ISSN 2189-0420. (Published)

Najahusna, Adnan (2021) Synthesis and characterization of superporous hydrogels by using gas blowing method. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Najwa Hidayah, Abdul Razak Ramesh and Mohd Riduwan, Ghazali and Mohd Ashraf, Ahmad (2021) Sigmoid PID based adaptive safe experimentation dynamics algorithm of portable duodopa pump for Parkinson’s disease patients. Bulletin of Electrical Engineering and Informatics, 10 (2). 632 -639. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Narayanamurthy, Vigneswaran and Jeroish, Z E. and Bhuvaneshwari, K. S. and Fahmi, Samsuri (2021) Hepatitis C virus (HCV) diagnosis via microfluidics. Analytical Methods, 13 (6). pp. 740-763. ISSN 1759-9660 (print); 1759-9679 (online). (Published)

Nashrin Iszhan, Ishak and Nazikussabah, Zaharudin (2021) Determination of nutritional value of tachypleus gigas (horseshoe crab). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nashrin Iszhan, Ishak and Nazikussabah, Zaharudin and Farah Nurshahidah, Mohd Subakir and Hew, Kar Mun and Teo, Hui Thing (2021) Application of different fruit peels powder as an organic fertilisers for the effective growth of water spinach (Ipomoea aquatica). Materials Science Forum, 1025. pp. 134-140. ISSN 1662-9752. (Published)

Nasser, Abdullah B. and Kamal Z., Zamli and Hujainah, Fadhl and Ghanem, Waheed Ali H. M. and Saad, Abdul-Malik H. Y. and Mohammed Alduais, Nayef Abdulwahab (2021) An adaptive opposition-based learning selection: The case for jaya algorithm. IEEE Access, 9 (9337859). 55581 -55594. ISSN 2169-3536. (Published)

Nasser, Abdullah B. and Nor Wardah, Mohd Nasir and Kamal Zuhairi, Zamli and Waheeda Ali, H. M. Ghanem and Fakhrud, Din (2021) Test suite generation based on hybrid flower pollination algorithm and hill climbing. In: ACM International Conference Proceeding Series; 10th International Conference on Software and Computer Applications, ICSCA 2021 , 23 - 26 February 2021 , Virtual, Online. pp. 1-10.. ISBN 9781450388825 (Published)

Nata, N. A. and Farhan, Mohd Said and Shalyda, Md Shaarani and Noorlisa, Harun (2021) Simulation of lovastatin production in solid-state fermentation via oil palm frond. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (2). pp. 7-10. ISSN 0126-8139. (Published)

Natanamurugaraj, Govindan and Bhuyar, Prakash and Feng, Ho Xuan and Mohd Hasbi, Ab. Rahim and Maniam, Gaanty Pragas and Sundararaju, S. and Muniyasamy, S. (2021) Evaluation of microalgae’s plastic biodeterioration property by a consortium of chlorella sp. and cyanobacteria sp. Environmental Research, Engineering and Management, 77 (3). pp. 86-98. ISSN 1392-1649. (Published)

Nawaz, Tasawar and Roszaini, Haniffa and Mohammad, Hudaib (2021) On intellectual capital efficiency and shariah governance in Islamic banking business model. International Journal of Finance and Economics, 26 (3). pp. 3770-3787. ISSN 1076-9307. (Published)

Nazaruddin, N. S. and Saidatul Shima, Jamari (2021) Effect on thermal properties of nanocellulose fibre (NCF) reinforced biodegradable polyhydroxylalkanoates (PHA) composite. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 10-13. ISSN 0126-8139. (Published)

Nazmi Imran, Makhilan and Nur Syafiqah, Fauzan and Nurhayati, Shariffudin and Amiruddin, Mohd Zin (2021) Development of safety assessment system for food premises. International Journal of Industrial Management (IJIM), 11 (1). 274 -286. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Nelfiyanti, Nelfiyanti and N. M. Zuki, N. M. and Nurul Aqilah Jazatul, Azhar (2021) Identification of ergonomic issues among Malaysian Automotive Assembly Workers by using the Nordic Body Map Method. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 69-81.. ISBN 978-981-15-9505-9 (Published)

Nelfiyanti, Nelfiyanti and Nik Mohd Zuki, Nik Mohamed and M. F. F., Ab. Rashid (2021) Ergonomics study in Quick Response Manufacturing (QRM) automotive workstation environment to overcome employee complaints. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering (LNME) . Springer Link, Singapore, pp. 681-693. ISBN 978-981-16-4115-2

Newaz, K.K. and Pal, S.K. and Hossain, S. and Karim, A. (2021) Evaluation of heavy metal pollution risk associated with road sediment. Environmental Engineering Research, 26 (3). pp. 1-9. ISSN 1226-1025. (Published)

Ng, C. C. and R. A., Rahman and S. W., Ahmad (2021) Factors affecting the enforcement of environmental regulation: The case of erosion and sediment control plan. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Virtual. pp. 1-9., 682 (1). ISSN 1755-1307 (Published)

Ng, Ke Huey (2021) An improved rdwt-based image steganography scheme using qr decomposition and human visual system. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Liew, Eric Siau Chuin).

Ng, Zhe Cheng and Shiekh Mahmud, Siti Hamidah Radiyah and Tan, Suat Hian (2021) Effects of cytokinin in enhancing the multiplication of vegetative hylocereus polyrhizus. Materials Science Forum, 1025. pp. 97-103. ISSN 1662-9752. (Published)

Ng, Zone Fhong (2021) Delineation of flood inundation extent as the result of land use changes in Kuantan River Basin. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gisen, Jacqueline Isabella).

Noor Akma, Abu Bakar (2021) Hybrid agent-based and social force simulation for modelling human evacuation egress. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mazlina, Abdul Majid).

Noor Amalina Nisa, Ariffin and Norhayati, Rosli and Abdul Rahman, Mohd Kasim and Mazma Syahidatul Ayuni, Mazlan (2021) Performance of 5-stage, 4-stage and specific stochastic Runge-Kutta methods in approximating the solution of stochastic biological model. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-13., 1988 (012008). ISSN 1742-6588 (Published)

Noor Asiah, Mohamad and Nurhidayah, Azmy and Mohamed Yusof, L. and Wahap, M. S. (2021) Derivation of high-resolution orthophoto map from multirotor drone survey for application in infrastructure management. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (1). ISSN 1755-1307 (Published)

Noor Raihana, Abu Sepian (2021) Immobilization of microalgae Chlorella vulgaris for biomass recovery and fatty acid methyl ester production. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Noor Raihana, Abu Sepian and Nur Hidayah, Mat Yasin and Norazwina, Zainol (2021) Evaluation of factors for cells growth of immobilized Chlorella vulgaris via factorial design approach. Chemical Engineering Communications, 208 (5). pp. 601-612. ISSN 1563-5201. (Published)

Noor Suraya, Romali and Othman, N. S. and Mhd Ramli, N. N. (2021) The application of green roof for stormwater quantity and quality improvement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (1). ISSN 1755-1307 (Published)

Noormaizzattul Akmaliza, Abdullah and Mohd Azwan, Mohamad Hamza and Al-Fahim, Mubarak Ali (2021) A review on distance measure formula for enhancing match detection process of generic code clone detection model in Java Application. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan. pp. 285-290., 4 (21). ISBN 978-1-6654-1407-4 (Published)

Nor Amira, Ahmad and Siti Noor Hidayah, Mustapha and Shamsul, Zakaria and Rasidi, Roslan and Lee, Tee Chuan and Rohani, Mustapha (2021) Fourier-Transform Infra Red (FTIR) analysis of uv curing biobased-polyurethane from epoxidized palm oil using acrylation and thiols addition. Materials Science Forum, 1025. pp. 91-96. ISSN 1662-9752. (Published)

Nor Amira, Othman and Fatmawati, Adam and Nur Hidayah, Mat Yasin (2021) Reinforced bioplastic film at different microcrystalline cellulose concentration. In: Materials Today: Proceedings, 11th Malaysian Technical Universities Conference on Engineering & Technology , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 77-82., Volume 41 (Part 1). (Published)

Nor Azmi, Johari and Juliawati, Alias and Aliaa, Zanurin and Nurul Shuhada, Mohamed and Nasrul Azuan, Alang and Mohd Zamzuri, Mohd Ghani (2021) Anti-corrosive coatings of magnesium : A review. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1842-1848., 48 (6). ISSN 2214-7853 (Published)

Nor Hanimah, Hamidi and Nurul Athirah, Mohd Alwi and Tarmalingam, Haishwari and Siti Sabirah Ani, Kutty and Siti Nur Nadzmiah, Mohd Nor (2021) Effect of extraction time and temperature on total flavanoid contents of petai belalang (leucaena leucocephala) seed pretreated by enzymatic hydrolysis. Pertanika Journal of Science & Technology (JST), 29 (3). 1751 -1761. ISSN 0128-7680. (Published)

Nor Hazwani, Aziz (2021) Nutrient enhancement of flooded soil by symbiotic soil fungi. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Ika Shahirah, Ramli and Syifak Izhar, Hisham and Nor Syahidatul Nadiah, Ismail and Ramalingam, Mritha (2021) Performance comparison between AODV and DSR In Mobile Ad-Hoc Network (MANET). In: Proceeding of 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM). 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. pp. 217-221.. ISBN 978-1-6654-1408-1 (Published)

Nor Sarahtul Nadirah, Hairol Nizan (2021) Reinforcement and optimization of hydroxyethyl cellulose / poly (vinyl alcohol) with cellulose nanocrystal as a bone tissue engineering scaffold. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nor Shafiqah, Mohd-Nasir and Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin (2021) Synergistic catalysis of bi-metals in the reforming of biomass-derived hydrocarbons: A review. International Journal of Hydrogen Energy, 46 (60). pp. 31000-31023. ISSN 0360-3199. (Submitted) (Submitted)

Noratikah, Abu and Sarah, Mohd Khaidi and Noryanti, Muhammad (2021) New tourism product forecasting - A study of different potential markets. In: AIP Conference Proceedings; International Conference on Mathematical Sciences and Technology 2020: Sustainable Development of Mathematics and Mathematics in Sustainability Revolution, MATHTECH 2020 , 8 - 10 December 2020 , Penang, Malaysia. pp. 1-9., 2423 (070001). ISSN 0094-243X ISBN 9780735441668 (Published)

Noratikah, Abu and Wan Nur Syahidah, Wan Yusoff and Megat Muhammad Afif, Megat Muainuddin and Syarifah Zyurina, Nordin (2021) SARIMA and exponential smoothing model for forecasting ecotourism demand: A case study in National Park Kuala Tahan, Pahang. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-7., 1988 (012118). ISSN 1742-6596 (Published)

Noratiqah, Chik (2021) Mitigation of bacterial adhesion on metal surfaces by surface roughness modification. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Wan Salwanis, Wan Md. Zain).

Norazmira Wati, Awang (2021) Study oil thermal-physical properties for nanocellulose nanoparticles for sae40 engine oil for tribological behaviour. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norazwina, Zainol and Nur izaty Ak'ma, Abu Hassan As'ari and Mohamad Shaiful, Abdul Karim and Nur Shahira, Mat Hussain (2021) Cellulose extraction from pineapple leaves to produce dielectric materials. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Norazwina, Zainol and Nurfarhana, Mustafa and Nor Hazwani, Aziz and Azahani Natasha, Azman and Mohamad Shaiful, Abdul Karim (2021) Dielectric materials development using bio-waste: A review. Journal of Electrical Systems and Information Technology (JESIT), 10 (47). pp. 1-25. ISSN 2314-7172. (Published)

Norfatirah, Muhamad Sarih and Nurlaila, Ismail and Akhtar, Nadeem and Saiful Nizam, Tajuddin (2021) Analysis of gc-fid and gc-ms microwave-assisted hydrodistillation extraction (mahd) of agarwood chips. International Journal of Integrated Engineering, 13 (6). pp. 180-189. ISSN 2229-838X. (Published)

Norhafidzah, Mohd Saad (2021) Optimal planning of photovoltaic distributed generation considering uncertainties using monte carlo pdf embedded MVMO-SH. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norhafzan, B. and Aqida, S. N. and Khairil, C. M. (2021) Optimization of laser melting parameter to enhanced surface properties in hot press forming die. IOP Conference Series: Materials Science and Engineering, 1078 (012020). pp. 1-7. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Norhafzan, B. and Khairil, C. M. and Aqida, S. N. (2021) Laser cladding process to enhanced surface properties of hot press forming die: A review. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-8., 1078 (012037). ISSN 1757-8981 (Print), 1757-899X (Online) (Published)

Norhaiza, Ghazali and Khairunisa, Muthusamy and Rahimah, Embong and I. S., A. Rahim and N. F., Muhamad Razali and Fadzil, Mat Yahaya and Nur Farhayu, Ariffin and Saffuan, Wan Ahmad (2021) Effect of fly ash as partial cement replacement on workability and compressive strength of palm oil clinker lightweight concrete. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (1). ISSN 1755-1307 (Published)

Norhaiza, Ghazali and Nur Farah Aziera, Jamaludin and Khairunisa, Muthusamy and Mohd Faizal, Md Jaafar and Fadzil, Mat Yahaya (2021) Eco-coalcrete : Waste-less earth, lively life. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Norliana, Bakar and Siew, Choo Chin (2021) Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties. In: Key Engineering Materials . pp. 284-293., 879. ISSN 1662-9795 (Published)

Norliana, Khamisan and Kamarul Hawari, Ghazali and Jiang, Xu (2021) Feature extraction of GNSS signals based on signal processing techniques for land deformation detection. In: International Conference on Space Science and Communication, IconSpace. 7th International Conference on Space Science and Communication, IconSpace 2021 , 23 - 24 November 2021 , Selangor. pp. 134-139., 2021-November. ISSN 2165-4301 ISBN 978-166542523-0 (Published)

Norliana, Munir (2021) Studies on local mango- and noniderived milk curds and their biological activities. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Norliana, Munir and Chun Xiang, Tan and Bhuyar, Prakash and Aizi Nor Mazila, Ramli (2021) Effective microbes (EM) and their potential on mushroom commercialization in Malaysia. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 45-55. ISSN 2673-0537. (Published)

Norsafiah, Fazli and N S, A Mutamim and S A, Rahim (2021) Bioelectrochemical cell (BeCC) integrated with granular activated carbon (GAC) in treating spent caustic wastewater: effects of solid retention time (SRT) and organic loading rate (OLR). IOP Conf. Series: Materials Science and Engineering, 736 (072011). pp. 1-14. (Published)

Nur A. A., Zaini and N. I. Z., Azman and T. F. T., Hamid and A. G. E., Sutjipto and M. A., Jusoh (2021) Structural, morphological and shielding effectiveness properties of Yttrium Iron Garnet/Epoxy composites at X-Band frequency prepared via solid state reaction method. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology 2021 , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1426-1431., 51 (Part 2). ISSN 2214-7853 (Published)

Nur Afikah, Khairi @ Rosli and Mohd Azrul Hisham, Mohd Adib and Ming, Mok Chik and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) Experimental study between TPU Flex and Silicon Materials Mechanical Properties as an alternatives in development of the CardioVASS Heart Model. In: 6 th Kuala Lumpur International Conference on Biomedical Engineering (BioMed2021) , 28 -29 July 2021 , Virtual. pp. 1-14.. (Published)

Nur Afikah, Khairi Rosli and Mohd Azrul Hisham, Mohd Adib and Nurul Natasha, Mohd Sukri and Idris, Mat Sahat and Nur Hazreen, Mohd Hasni (2021) The CardioVASS Heart Model: Comparison of Biomaterials between TPU Flex and Soft Epoxy Resin for Biomedical Engineering Application. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 224-229. (20611023). ISBN 978-1-7281-4245-6 (Published)

Nur Afiqah, Mohd Radzi (2021) A study on decision criteria for assessing construction readiness of highway projects. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Doh, Shu Ing).

Nur Afiqah, Mohd Radzi and Abdul Rahimi, Abdul Rahman and Doh, Shu Ing (2021) Decision making in highway construction: a systematic review and future directions. Journal of Engineering, Design and Technology. pp. 1-24. ISSN 1726-0531. (In Press / Online First) (In Press / Online First)

Nur Afiqah, Mohd Radzi and R. A., Rahman and Doh, Shu Ing and M., Esa (2021) A Comparative Study on the Readiness Parameters of Highway Construction Projects. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. pp. 1-12., 641 (012008). ISSN 1755-1315 (Published)

Nur Aini Safiah, Abdullah and Fatin Farisha, Abdullah and Amirul Hakim, Sufian and Ahmad Noor Syukri, Zainal Abidin and Ahmad Shahir, Jamaludin and Mohd Nizar, Mhd Razali (2021) Effect of degradation by temperature onto nitrile rubber elastomer mechanical properties. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1941-1946., 48 (6). ISSN 2214-7853 (Published)

Nur Alya Syamimie, Muzaidi and Mohd Amiruddin, Fikri and Khairul Nizar Syazwan, Wan Salihin Wong and Azfi Zaidi, Mohammad Sof and R., Mamat and Norfatihah, Mohd Adenam and Muhamad Yuzaini Azrai, Mat Yunin and Hasyiya Karimah, Adli (2021) Heat absorption properties of CuO/TiO2/SiO2 trihybrid nanofluids and its potential future direction towards solar thermal applications. Arabian Journal of Chemistry, 14 (4). pp. 1-12. ISSN 1878-5352. (Published)

Nur Ameerah, Hakimi and Mohd Azhar, Mohd Razman and Anwar P. P., Abdul Majeed (2021) The classification of Covid-19 cases through the employment of transfer learning on X-ray images. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 44-51. ISSN 2637-0883. (Published)

Nur Athirah, Badrulhisham (2021) Monitoring of aircraft noise level on residents nearby Malaysian airport. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nurul Shahida, Mohd. Shalahim).

Nur Athirah, Mohamad Radzi and Azizul Helmi, Sofian and Saidatul Shima, Jamari (2021) Studies on the Modification of Fly Ash structure with Alkaline Pre-treatment as a Green Composite Flame Retardant Filler. In: The 32nd Symposium of Malaysian Chemical Engineers 2021 (SOMChE2021) , 15-16 July 2021 , Kuching, Sarawak. pp. 1-9.. (Submitted) (Submitted)

Nur Azhani, Abd Razak and Asnul Hadi, Ahmad and Mohd Maarof, Rashidi and Naher, Sumsun (2021) An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology (114). pp. 1233-1240. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Nur Bazilah, Thalib (2021) Mechanical and thermal properties of graphene oxide reinforced acrylated epoxidised palm oil/unsaturated polyester resin. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Siti Noor Hidayah, Mustapha).

Nur Eliza, Badrul Hisham (2021) Enhancement of nitrogen uptake in palm oil-based compost by using rice husk ash (RHA) for Chinese kale’s growth. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Eliza, Badrul Hisham and Nor Hanuni, Ramli (2021) Incorporation of Rice Husk Ash with Palm Oil Mill Wastes in Enhancing Physicochemical Properties of the Compost. Pertanika Journal of Tropical Agricultural Science, 44 (1). pp. 221-236. ISSN 1511-3701 (Print); 2231-8542 (Online). (Published)

Nur Elya Haniza, Zamiruddin and Nurrina, Rosli and Amiril Sahab, Abdul Sani (2021) Experimental Study of Lubricant Oil Film Behavior on Al6061 under MQL Milling Process. In: Innovative Manufacturing, Mechatronics & Materials Forum (iM3F 2021) , 20 September 2021 , Universiti Malaysia Pahang (Virtual). pp. 1-9.. (Unpublished) (Unpublished)

Nur Farah Aziera, Jamaludin and Khairunisa, Muthusamy and Nurul Nabilah, Isa and Mohd Faizal, Md Jaafar and Norhaiza, Ghazali (2021) Use of spent garnet in industry: A review. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences (iCITES 2020). , 22 December 2020 , Chennai. pp. 728-733., 48 (4). ISSN 2214-7853 (Published)

Nur Farahaina, Idris and Mohd Arfian, Ismail (2021) Breast cancer disease classification using fuzzy-ID3 algorithm with FUZZYDBD method: automatic fuzzy database definition. PeerJ Computer Science. ISSN 2376-5992. (Published)

Nur Farha, Shaafi (2021) Theoretical and experimental investigations of lead chalcogenides quantum confined structures for solar cell application. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Farha, Shaafi and Saifful Kamaluddin, Muzakir and Shujahadeen B., Aziz and Mohd Fakhrul Zamani, Kadir and Suresh, Thanakodi (2021) The effect of activated carbon additives on lead sulphide thin film for solar cell applications. Journal of Alloys and Compounds, 864 (158117). ISSN 0925-8388. (Published)

Nur Farhayu, Ariffin and Khairunisa, Muthusamy and Fadzil, Mat Yahaya and Sharifah Maszura, Syed Mohsin and Khairul Anuar, Shahid and Saffuan, Wan Ahmad and Abdul Muiz, Hasim and Muhammad Nor Syahrul, Zaimi and Nurul Natasha, Nasrudin and Muhammad Rafie, Ashaari and Nor Hasanah, Abdul Shukor Lim and Mohd Warid, Hussin and Hamidun, Mohd Noh (2021) Coal bottom ash lightweight brick. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nur Farziana, Husein and Nurul Hidayah, Razak (2021) Tool deterioration of 316 stainless steel in dry down-milling using carbide insert. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 911-915., 48 (4). ISSN 2214-7853 (Published)

Nur Fathin Shamirah, Daud (2021) Optimization and kinetic study of pigments production on solid state fermentation using oil palm frond by monascus purpureus ftc 5357. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Fathin Shamirah, Daud and Farhan, Mohd Said and Chisti, Yusuf and Nur Hidayah, Mat Yasin (2021) Recovery of red pigments from monascus purpureus FTC 5357 by extraction of fermented solids: Operational conditions and kinetics. Brazilian Archives of Biology and Technology, 64. pp. 1-11. ISSN 1516-8913. (Published)

Nur Fathin Shamirah, Daud and Farhan, Mohd Said and Nur Hidayah, Mat Yasin and Mior Ahmad Khushairi, Mohd Zahari (2021) Optimization of red pigment production by solid state fermentation using oil palm frond. Materials Science Forum, 1025. pp. 150-156. ISSN 1662-9752. (Published)

Nur Fatihah, Jeffri and Hanida, Abdul Aziz and Mimi Nabila, Mohd Noordin (2021) Pattern of occupant injury for real frontal crashes in malaysia. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Nur Fatihah, Mod Omar and Husna Izzati, Osman and Ahmad Qushairi, Mohamad and Rahimah, Jusoh and Zulkhibri, Ismail (2021) Effects of radiation and magnetohydrodynamic on unsteady Casson fluid over accelerated plate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 93-100. ISSN 2289-7879. (Published)

Nur Fazlinna, Ab Ghani and Azizan, Ramli and Kharul Anwar, Johari and Mohd Shaiful Zaidi, Mat Desa and Norhaslinda, Hanapi (2021) Bridging academician and community through knowledge transfer program (KTP) on workplace risk assessment technique- A case study. International Journal of Industrial Management (IJIM), 11 (1). pp. 262-273. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Nur Hanani, Rushan (2021) The cultivation of immobilized chlorella vulgaris in different culture medium for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hatipah, Ibrahim (2021) Dilute acid hydrolysis pretreatment process of meranti wood sawdust using aspen plus. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nur Hazimah Syazana, Abdul Razak and Nur Shahira, Mat Hussain and Nurul Hazlina, Noordin and Syamimi Mardiah, Shaharum and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2021) Flat lens design using phase correction technique for horn antenna applications. Telkomnika, 19 (1). 213 -219. ISSN 1693-6930. (Published)

Nur Nabilah, Mohd Za’im and Hartina, Mohd Yusop and Wan Norfazilah, Wan Ismail (2021) Synthesis of water-repellent coating for polyester fabric. Emerging Science Journal, 5 (5). 747 -754. ISSN 2610-9182. (Published)

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan (2021) Industrial Sustainability Policy and Standards-Related on Management Discipline of SMEs Industry in Malaysia: A Conceptual Framework. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 25-32. ISBN 978-981-15-9505-9

Nur Qurratul Ain, Adanan and Faiz, Mohd Turan and Kartina, Johan (2021) Sustainable Finished Product Optimization on Quality Response and Attitudinal Parameters. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 261-268.. ISBN 978-981-15-7309-5 (Published)

Nur Syahirah, Mohd Sabli (2021) Wireless monitoring and arima stream analytics system for freshwater lobster farm. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Mohd Faizal, Jamlos).

Nur Syahirah, Mohd Sabli and Mohd Faizal, Jamlos and Fatimah, Dzaharudin (2021) Sustainability of fertigation in agricultural crop production by IoT system: A review. In: Recent Trends in Mechatronics Towards Industry 4.0. Springer, Singapore, pp. 87-96. ISBN 978-981-33-4597-3

Nur Syahirah, Zulkipli and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2021) Graphical Summaries of Circular Data with Outliers Using Python Programming Language. Applied Mathematics and Computational Intelligence, 10 (1). pp. 278-287. ISSN 2289-1315. (Published)

Nur Syahirah, Zulkipli and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2021) A synthetic data generation procedure for univariate circular data with various outliers scenarios using Python programming language. In: 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28-29 July 2021 , Kuantan, Pahang, Virtual. pp. 1-10., 1988 (012111). ISSN 1742-6588 (Published)

Nuramira Fateha, Sukor and Rohayu, Jusoh and Nur Syahirah, Kamarudin (2021) Intensification of phenolic acids extraction from Aleppo oak via probe type sonication method: Kinetic, antioxidant and cost evaluation. Chemical Engineering Research and Design, 166. pp. 227-236. ISSN 0263-8762. (Published)

Nurazima, Ismail and Z. M., Hafizi and C. K. E., Nizwan and S., Ali (2021) Interactions of Lamb waves with defects in a thin metallic plate using the finite element method. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 183-193.. ISBN 978-981-15-7309-5 (Published)

Nurcahyawati, Vivine and Mustaffa, Zuriani (2021) Feature selection based on particle swarm optimization algorithm for sentiment analysis classification. In: International Conference on Intelligent Technology, System and Service for Internet of Everything, ITSS-IoE 20212 , 1 - 2 November 2021 , Virtual, Online. pp. 1-7. (174856). ISBN 978-166543305-1 (Published)

Nurfarhana, Mustafa and Nur Hazimah Syazana, Abdul Razak and Nurhafizah, Abu Talip Yusof and Mohamad Shaiful, Abdul Karim (2021) Development of microwave antenna for cancer treatment. In: Advances in Intelligent Systems and Computing. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Switzerland, pp. 127-136. ISBN 978-3-030-70917-4

Nurfatin Farhanah, Rohimi and Muhd Nor Arifin, Yaakob and Rasidi, Roslan and Nurjannah, Salim and Siti Noor Hidayah, Mustapha and Mohd Hasbi, Ab. Rahim and Chia, Chinhua and Sarani, Zakaria (2021) Structural and thermal analysis of bio-based polybenzoxazine derived from liquefied empty fruit bunch (EFB) via solventless method. In: Materials Today: Proceedings, 3rd Symposium on Industrial Science and Technology (SISTEC2021) , 25-26 August 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1367-1371., 51 (Part 2). ISSN 2214-7853 (Published)

Nurhanis Sofiah, Abd Ghafar (2021) Thermophysical properties of stabilized copper oxide-polyaniline-palm oil based nanofluids. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurhanis Sofiah, Abd Ghafar and Samykano, Mahendran and K., Kadirgama and Shahabuddin, Syed and Pandey, A. K. (2021) A comparative experimental study on the physical behavior of mono and hybrid RBD palm olein based nanofluids using CuO nanoparticles and PANI nanofibers. International Communications in Heat and Mass Transfer, 120 (105006). pp. 1-13. ISSN 0735-1933. (Published)

Nurhasniza, Mamajan Khan and Noor Saadiah, Mohd Ali and Ahmad Salihin, Samsudin (2021) Effect of intermolecular interaction on ionic conductivity of CMC-DTAB plasticized with Ec based solid biopolymer electrolyte. In: Materials Science Forum; 2nd Postgraduate Symposium on Industrial Science and Technology, SISTEC 2020 , 26 - 27 August 2020 , Virtual, Online. pp. 26-31., 1025 (257819). ISSN 0255-5476 ISBN 978-303573757-8 (Published)

Nurin Awanis, Mohd Rudin and Suhaimi, Puteh and Jessnor Arif, Mat Jizat and Ismail, Mohd Khairuddin and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman (2021) Classification of plant health (capsicum frutescens) normalize differences vegetation index using image processing. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 89-96. ISSN 2637-0883. (Published)

Nurizaty, Z. and Mariyana, A.A.K and Shek, P.N. and Mohd Najmi, A.M. and Mujedu K, Adebayo and Mohamed Tohami, M. A Sif and Putra Jaya, Ramadhansyah (2021) Experimental investigation on post-fire performances of fly ash concrete filled hollow steel column. International Journal of High-Rise Buildings, 10 (4). pp. 335-344. ISSN 2234-7224. (Published)

Nurmadiha, Osman (2021) Evaluation of arima and ann stream analytics for air quality monitoring system. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul, Md Yunus and Noor Aliff, Noor Affande and Roshahliza, M. Ramli and Noor, Ali O. Abid and Salina, Abdul Samad (2021) Preprocessing Noise Reduction For Assistive Listening System. In: IEEE 1st International Conference on Electronic and Electrical Engineering and Intelligent Systems (ICE3IS 2021) , 15-16 October 2021 , Online. pp. 114-119.. ISBN 9781665405461 (Published)

Nurul Afiqah, Zainal and Kamil Zakwan, Mohd Azmi and Muhammad Aizzat, Zakaria and Abdul Majeed, Anwar P. P. (2021) Minimizing normal vehicle forces effect during cornering of a two in-wheel vehicle through the identification of optimum speed via particle swarm optimization. In: Advances in Robotics, Automation and Data Analytics. Advances in Intelligent Systems and Computing, 1350 (https://doi.org/10.1007/978-3-030-70917-4). Springer, Berlin, Germany, pp. 407-412. ISBN 978-303070916-7

Nurul Aina Nasriqah, Ma’arof and Noor, Hindryawati and Siti Norhafza, Mohd Khazaai and Bhuyar, Prakash and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2021) Exploitation of cost-effective renewable heterogeneous base catalyst from banana (Musa paradisiaca) peel for effective methyl ester production from soybean oil. Applied Nanoscience. pp. 1-12. ISSN 2190-5509 (Print); 2190-5517 (Online). (Published)

Nurul Aishah, Mazlan and Kamaliah, Abdul Samad and Wan Mohd Hafizuddin, Wan Yussof and Rozaimi, Abu Samah and Jamaliah, Md Jahim (2021) Xylan recovery from dilute nitric acid pretreated oil palm frond bagasse using fractional factorial design. Journal Of Oil Palm Research, 33 (2). pp. 307-319. ISSN 1511-2780. (Published)

Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Nur Shafiqah, Nasir and Chin, Sim Yee and Y.H., Taufiq-Yap (2021) Extracted c-Al2O3 from aluminum dross as a catalyst support for glycerol dry reforming reaction. Materials Today: Proceedings, 42 (1). pp. 63-68. ISSN 2214-7853. (Published)

Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Osazuwa, Osarieme Uyi and Chin, Sim Yee and Y. H., Taufiq-Yap (2021) H2-rich syngas from glycerol dry reforming over Ni-based catalysts supported on alumina from aluminum dross. International Journal of Hydrogen Energy, 46 (60). pp. 1-17. ISSN 0360-3199. (Published)

Nurul Asmawati, Roslan and Sumaiya, Zainal Abidin and Uyi Osazuwa, Osarieme and Sim, Yee Chin and Y.H., Taufiq-Yap (2021) H2-rich syngas from glycerol dry reforming over Nibased catalysts supported on alumina from aluminum dross. International Journal of Hydrogen Energy, 46 (60). pp. 30959-30975. ISSN 0360-3199. (Published)

Nurul Atikah, Mohd Rodzri (2021) Optimization of xylonic acid production using recombinant e. coli bl21 (de3) with inserted gene from ralstonia pickettii. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Atiqah Mohd, Pauzi and Rodziah, Nazlan and Nurul Masliana, Khairil Anuar and Mohamad Ashry, Jusoh and Idza Riati, Ibrahim and Farah Nabilah, Shafiee (2021) Sintering temperature dependence on evolving microstructure and magnetic characteristics of cobalt ferrites. In: Materials Today: Proceedings; 3rd Symposium on Industrial Science and Technology, SISTEC 2021 , 25 - 26 August 2021 , Kuantan, Pahang. pp. 1420-1425., 51 (2). ISSN 2214-7853 (Published)

Nurul A’in, Nadzri and Mohd Mawardi, Saari and Mohd Aufa Hadi, Putera Zaini and Aiman, Mohd Halil and M., Ishak and Tsukada, Keiji (2021) Anisotropy magnetoresistance differential probe for characterization of sub-millimeter surface defects on galvanized steel plate. Measurement and Control, 2021. pp. 1-13. ISSN 0020-2940. (Published)

Nurul Fadzlina, Jamin and Normaniha, Abd Ghani and Zuwairie, Ibrahim and Ahmad Nor Kasruddin, Nasir and Mamunur, Rashid and Mohammad Osman, Tokhi (2021) Stabilizing control of two-wheeled wheelchair with movable payload using optimized interval type-2 fuzzy logic. Journal of Low Frequency Noise, Vibration and Active Control, 40 (3). pp. 1585-1606. ISSN 1461-3484 (Print), 2048-4046 (Online). (Published)

Nurul Farhana, Abu Kasim (2021) Synthesis of graphene by pullulan-assisted exfoliation of graphite using ultrasonic bath. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Hajar, Embong and Noor, Hindryawati and Bhuyar, Prakash and Govindan, Natanamurugaraj and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2021) Enhanced biodiesel production via esterification of palm fatty acid distillate (PFAD) using rice husk ash (NiSO4)/SiO2 catalyst. Applied Nanoscience. pp. 1-9. ISSN 2190-5509 (Print); 2190-5517 (Online). (Published)

Nurul Hajar, Embong and Noor, Hindryawati and Prakash, Bhuyar and Govindan, Natanamurugaraj and Mohd Hasbi, Ab Rahim and Gaanty Pragas, Maniam (2021) Enhanced biodiesel production via esterification of palm fatty acid distillate (PFAD) using rice husk ash (NiSO4)/SiO2 catalyst. Applied Nanoscience, 11 (6). pp. 1-9. ISSN 2190-5509 (Print); 2190-5517 (Online). (Published)

Nurul Husna Elyana, Hanifa (2021) Properties of nickel-supported palm oil fuel ash (Ni-POFA) catalyst produced via in situ glycine-nitrate combustion for methane cracking. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Izzatie Husna, Fauzi and Zalili, Musa and Nor Saradatul Akmar, Zulkifli (2021) Midrange exploration exploitation searching particle swarm optimization in dynamic environment. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan, Pahang, Malaysia. pp. 649-654.. ISBN 978-1-6654-1407-4 (Published)

Nurul Izzatie Husna, Fauzi and Zalili, Musa and Nor Saradatul Akmar, Zulkifli (2021) Video Tracking System Using Midrange Exploration Exploitation Searching-Particle Swarm Optimization (MEESPSO) in handling occlusion and similar appearance due to crowded environment. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan, Pahang, Malaysia. pp. 255-260., 1. ISBN 978-1-6654-1407-4 (Published)

Nurul Jannah, Baharuddin and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2021) Experimental study on die shoulder patterning method (DSPM) to reduce springback of U-bending hat-shape part (in Press). In: 12th Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2021) , 16-18 November 2021 , Melaka, Malaysia. pp. 1-3.. (Unpublished) (Unpublished)

Nurul Jannah, Baharuddin and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin (2021) Study of springback behavior on u-bending part using die shoulder patterning method (DSPM). In: International Conference on Manufacturing Engineering and Technology (ICONMET 2021) , 14-15 July 2021 , Langkawi (Virtual Mode). pp. 1-7.. (Unpublished) (Unpublished)

Nurul Khairiyyah, Mohd Zain and Chelladurai, Karuppiah and Izan Izwan, Misnon and Das, Santanu and Ikechukwu Ozoemena, Kenneth and Yang, Chun-Chen and Rajan, Jose (2021) High Capacity and Rate Capability Binder-less Ternary Transition Metal-organic Framework as Anode Material for Lithium-ion Battery. Electroanalysis, 32 (12). pp. 3180-3188. ISSN 1521-4109. (Published)

Nurul Nadirah, Suteris (2021) Synthesis and characterization of cellulose fibers cloths for tissue engineering. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Najihah, Ishak and Nafarizal, Nayan and Mohamed Ali, Mohamed Sultan and Megat Muhammad Ikhsan, Megat Hasnan and Mohd Khairul, Ahmad and Mohd Kamarulzaki, Mustafa and Ayib Rosdi, Zainun and Mohamad Hafiz, Mamat (2021) Nano-embedded high performance non-toxic solar cell. Science Proceedings Series, 4 (1). pp. 42-46. ISSN 2663-9467. (Published)

Nurul Najihah, Zulkifli and Mohd Syakirin, Ramli (2021) State feedback controller tuning for liquid slosh suppression system utilizing LQR-LMI approach. In: 2021 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2021 , 26 June 2021 , Shah Alam, Malaysia. pp. 52-57. (9495861). ISBN 9781665403436 (Published)

Nurul Najihaha, . and Gebremariam, M. A. and Azmir, Azhari and Mulubrhan, Freselam (2021) Simulation modeling of a manufacturing process using Tecnomatix plant simulation software. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 56-62. ISSN 2636-9575. (Published)

Nurul Saidatul Akmal, Ab. Razak and Rahmah, Mokhtar (2021) Effects of eye health among youngster while playing computer game. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 291-294.. ISBN 978-1-6654-1407-4 (Published)

Nurul Shareena Aqmar, Mohd Sharif (2021) Production of ferulic acid via feruloyl polysaccharide hydrolysis of banana stem waste using soil mixed culture. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Shareena Aqmar, Mohd Sharifa and Norazwina, Zainol and Mohd Faizan, Jamaluddin (2021) Factorial analysis of Ferulic Acid production from biowaste. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1763-1769., 46 (Part 4). ISSN 2214-7853 (Published)

Nurul Syafiqah, Mohd Azmi and Danial, Mohamed and Mohd Yuhyi, Mohd Tadza (2021) Effect of plasticity characteristics on the electrical resistivity of bentonite. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. 796 -800., 48 (4). ISSN 2214-7853 (Published)

Nurul Syazwana, Noor Azmi (2021) Simulation and experimental study of biogas explosion. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Nurul Waheeda, Abdu Rahman (2021) Characterization of lubricating grease formulated from waste engine oil. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abd Aziz, Mohd Aizudin).

Nurulain, S. and Hafiza, Z. and Siera, R. and Musfirah, M. and Salim, M. R. and Hadi, Manap (2021) A mobile air particle system using an optical sensor for haze measurement. In: Journal of Physics: Conference Series; 1st International Conference on Advances in Smart Sensor, Signal Processing and Communication Technology, ICASSCT 2021 , 19 - 20 March 2021 , Goa, India. pp. 1-9., 1921 (012056). ISSN 1742-6596 (Published)

Nurulfadzilah, Hasan and Nur Shahira, Mat Hussain and Nur Hazimah Syazana, Abdul Razak and Ahmad Syahiman, Mohd Shah and Mohamad Shaiful, Abdul Karim (2021) Fabrication and characterization of epoxy resin–barium titanate at G-band using waveguide technique. In: IOP Conference Series: Materials Science and Engineering, First International Conference on Electrical Energy and Power Engineering (ICEEPE 2020) , 25-26 August 2020 , Penang, Malaysia. pp. 1-9., 1045 (012012). ISSN 1755-1315 (Published)

Nuruzzakiyah, Mohd Ishanuddin (2021) Psychosocial risk factors and work performance of chemical manufacturing industry workers. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

O

Obi, Nasreldeen Ishag and Mohd Najib, Razali and Abdurahman, Hamid Nour (2021) Characterisation of bitumen, refined waste oil, and emulsifiers for coating and insulation purposes. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-8., 1092 (012021). ISSN 1757-899X (Published)

Odili, Julius Beneoluchi and Noraziah, Ahmad and Zarina, M. (2021) A comparative performance analysis of computational intelligence techniques to solve the asymmetric travelling salesman problem. Computational Intelligence and Neuroscience, 2021 (6625438). pp. 1-13. ISSN 1687-5265 (print); 1687-5273 (online). (Published)

Omer, A. H. and Mokaizh, A. A. and Jun Haslinda, Shariffuddin (2021) Low-calcination temperature to synthesize a-alumina from aluminium waste can using sol-gel method. In: IOP Conference Series: Earth and Environmental Science; International Conference of Sustainable Earth Resources Engineering 2020, SERIES 2020 , 19 June 2020 , Virtual. pp. 1-8., 641 (1). ISSN 1755-1307 (Published)

Omer, Manal Suliman and M.N., M. Nawi and Adeleke, A. Q. and Sitansu, Panda and A. N., Harun and Salameh, Anas A. (2021) Analysis of organizational Internal factors influencing construction risk management among construction industries. Productivity Management, 26 (1). pp. 106-128. ISSN 1868-8519. (Published)

Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin (2021) Catalysts for Carbon dioxide utilization to sustainable energy and fuels. In: Catalysis for CO2 Conversion; Perovskite Based. Advances in Science, Technology & Innovation book series (ASTI) (1). Springer Cham, pp. 297-310. ISBN 978-3-030-72876-2 (Printed); 978-3-030-72877-9 (Online)

Osazuwa, Osarieme Uyi and Sumaiya, Zainal Abidin and Fan, Xiaolei and Amenaghawon, Andrew Nosakhare and Mohammad Tazli, Azizan (2021) An insight into the effects of synthesis methods on catalysts properties for methane reforming. Journal of Environmental Chemical Engineering, 9 (1). pp. 1-15. ISSN 2213-3437. (Published)

Osmanullrazi, Abdullah and Adzhar, Kamaludin and Nur Shamsiah, Abdul Rahman (2021) Gender differences in computational thinking skills among Malaysian’s primary school students using visual programming. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. 655 -660.. ISBN 978-1-6654-1407-4 (Published)

P

P., Jadhav and M., Nasrullah and A. W., Zularisam and P., Bhuyar and S., Krishnan and P., Mishra (2021) Direct interspecies electron transfer performance through nanoparticles (NPs) for biogas production in the anaerobic digestion process. International Journal of Environmental Science and Technology. pp. 1-13. ISSN 1735-1472(Print); 1735-2630(Online). (In Press / Online First) (In Press / Online First)

Palanisamy, Karthick Murugan (2021) Cultivation of microalgae spirulina sp. in palm oil mill effluent for essential fatty acids production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Govindan, Natanamurugaraj).

Pang, Kar Kei (2021) Management of change framework with integrated risk analysis for temporary and emergency cases. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Hanida, Abdul Aziz).

Peddakapu, K. and M. R., Mohamed and M. H., Sulaiman and Srinivasarao, P. and Kishore, D. J. K. and P. K., Leung (2021) Cuckoo optimised 2DOF controllers for stabilising the frequency changes in restructured power system with wind-hydro units. International Journal of Ambient Energy, 42 (11). pp. 1-16. ISSN Print: 0143-0750, Online: 2162-8246. (Published)

Poh Lee, Soon and Gomaa, A.M. Ali and H.H., Hegazy and Lim, Hong Ngee and Chong, Kwok Feng (2021) Optimizing reduced graphene oxide aerogel for a supercapacitor. Batteries & Energy, 35 (5). pp. 4559-4569. (Published)

Primilla, Paramasivam (2021) Mass cultivation and lipid production of microalgae nanochloropsis sp using 10l photobiorector for biodiesel production. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Gaanty Pragas, Maniam).

Primilla, Paramasivam and Karthiani, Kanagesan and Bhuyar, Prakash and Natanamurugaraj, Govindan and Mohd Hasbi, Ab. Rahim and Gaanty Pragas, Maniam (2021) Biomass and lipid production from indigenous Nannochloropsis sp. by employing stress factors for improved biodiesel production. Environment, Development and Sustainability. pp. 1-15. ISSN 1387-585X. (Published)

Priyatachni, Subramanie and Shamala Devi, Vijayakumar and Norida, Ridzuan (2021) Effect of wax inhibitor and sodium cloisite, Na+ nanoparticle on wax deposition of Malaysian crude oil through cold finger analysis. Petroleum Science and Technology, 39 (19-20). pp. 860-877. ISSN 1091-6466 (Print), 1532-2459 (Online). (Published)

Putri Nur Farhanah, Mohd Shamsuddin and Muhamad Arifpin, Mansor (2021) Motion Control Algorithm for Path Following and Trajectory Tracking for Unmanned Surface Vehicle: A Review Paper. In: 3rd International Conference on Control, Robotics and Cybernetics (CRC 2018) , 26-28 September 2018 , Penang, Malaysia. pp. 73-77. (18870826). ISBN 978-1-5386-7738-4 (Published)

Putri Nur Farhanah, Mohd Shamsuddin and Roshahliza, M. Ramli and Muhamad Arifpin, Mansor (2021) Navigation and motion control techniques for surface unmanned vehicle and autonomous ground vehicle: a review. Bulletin of Electrical Engineering and Informatics, 10 (4). pp. 1893-1904. ISSN 2089-3191 (Print); 2302-9285 (Online). (Published)

Q

Qalati, Sikandar Ali and Li, Wenyuan and Ahmed, Naveed and Mirani, Manzoor Ali and Khan, Asadullah (2021) Examining the factors affecting SME Performance: The Mediating Role of Social Media Adoption. Sustainability, 13 (75). pp. 1-24. ISSN 2071-1050. (Published)

Qayyum, Halim and Nik Abdullah, Nik Mohamed and M. R. M., Rejab and Wan Naimah, Wan Abdul Naim and Ma, Quanjin (2021) Metallic glass properties, processing method and development perspective: a review. The International Journal of Advanced Manufacturing Technology, 112. pp. 1231-1258. ISSN 0268-3768 (Print), 1433-3015 (Online). (Published)

Qistina Balkis, Mohd Yusof (2021) Etika kerja Islam hubungannya dengan kemahiran kepimpinan dalam kalangan kepimpinan pelajar di Universiti Malaysia Pahang (UMP). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qurratu 'Aini Aishah, Ahmad Fazil (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Qurratu 'Aini Aishah, Ahmad Fazil and Ummu Kulthum, Jamaludin (2021) Prediction of blood glucose level based on lipid profile and blood pressure using multiple linear regression model. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. pp. 43-61.. ISSN 2195-4356 ISBN 978-981164114-5 (Published)

R

R., Linggamm and M. Nasir, Bashir and Quazi, M. M. and M., Ishak (2021) The influence of nanosecond fibre laser on the removal of paint on metallic surface. International Journal of Technology and Engineering Studies, 7 (2). pp. 1-7. ISSN 2414-3413. (Published)

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2021) Ergonomics study on visual contribution of postural stability using Physio-Treadmill (PhyMill) for kid with cerebral. In: Intelligent Manufacturing and Mechatronics: Proceedings of the 2nd Symposium on Intelligent Manufacturing and Mechatronics – SympoSIMM 2019 , 8 July 2019 , Melaka, Malaysia. pp. 1137-1149.. ISBN 978-981-16-0866-7 (Published)

Rabiatul Aisyah, Ariffin and Mohd Azrul Hisham, Mohd Adib and Nurul Shahida, M. S. and Narimah, Daud and Nur Hazreen, Mohd Hasni (2021) Physio-Treadmill (PhyMill): Ergonomics Evaluation of Posture Impact on Kids with Cerebral Palsy using Digital Human Modeling (DHM) Simulation. In: IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Langkawi Island, Malaysia. pp. 1-6.. ISBN 978-1-7281-4245-6 (Published)

Radzi, N. S. M. and Siti Roslindar, Yaziz (2021) Forecasting Malaysian overnight Islamic interbank rate using the Box-Jenkins model. Data Analytics and Applied Mathematics (DAAM), 2 (1). pp. 38-51. ISSN 2773-4854. (Published)

Radzuan, N. Q. and Mohd Hasnun Ariff, Hassan and Abu Kassim, K. A. and Ab. Rashid, A. A. and Intan Suhana, Mohd Razelan and Nur Aqilah, Othman (2021) The analysis of road traffic fatality pattern for Selangor, Malaysia case study. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (1). pp. 79-88. ISSN 2637-0883. (Published)

Rahim, Md. Abdur and Rahman, M.M. and Rahman, Md Arafatur and Abu Jafar, Md Muzahid and Syafiq Fauzi, Kamarulzaman (2021) A framework of IoT-enabled vehicular noise intensity monitoring system for smart city. In: Advances in Intelligent Systems and Computing book series. Advances in Intelligent Systems and Computing book series, 1350 . Springer, Cham, Springer Nature Switzerland, pp. 194-205. ISBN 978-3-030-70917-4

Rahimi, Ramli and Izwan, Ismail (2021) Effect of dimple diameter and pattern on frictional properties of macro-dimpled aluminium surface. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. 139 -146.. ISSN 2195-4356 ISBN 9789811573088 (Published)

Rahman, Md Arafatur and Muhammad Afiq, Azmi and Mohammad Nafees, Zaman and Naeem, Muhammad Kamran and Pillai, Prashant and Patwary, Mohammad Nuruzzaman (2021) TRACTS-Net : An intelligent road damage detection system using 5G integrated team-forming network. In: Proceedings - 2021 IEEE 4th 5G World Forum, 5GWF 2021. th IEEE 5G World Forum, 5GWF 2021 , 13 - 15 October 2021 , Virtual, Online. pp. 470-474.. ISBN 978-166544308-1 (Published)

Rahman, Md. Arafatur and Sze Wei, Tan and Rahman, Md Mustafizur and Md Muzahid, Abu Jafar (2021) Automated palm oil supply chain system with traceability. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Rahman, Md. Arafatur and Zaman, Nafees and Asyhari, A. Taufiq and Nazmus Sadat, S. M. and Pillai, Prashant and Ruzaini, Abdullah Arshah (2021) SPY-BOT: Machine learning-enabled post filtering for social network-integrated industrial internet of things. Ad Hoc Networks, 121 (102588). pp. 1-11. ISSN 1570-8705. (Published)

Ramadhan, Anwar Ilmar and Wan Azmi, Wan Hamzah (2021) The effect of nanoparticles composition ratio on dynamic viscosity of Al2O3-TiO2-SiO2 nanofluid. In: Materials Today: Proceedings; 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021 , 20 September 2021 , Pekan. pp. 1920-1923., 48 (6). ISSN 2214-7853 (Published)

Ramkiran, B. and Sundarabalan CK, C. K. and Sudhakar, K. (2021) Sustainable passive cooling strategy for PV module: A comparative analysis. Case Studies in Thermal Engineering, 27 (101317). pp. 1-10. ISSN 2214-157X. (Published)

Ramli, A. N. M. and Nur Afiqah, Muhammad Sukri and Nur Izyan, Wan Azelee and Bhuyar, Prakash (2021) Exploration of antibacterial and antioxidative activity of seed/peel extracts of Southeast Asian fruit Durian (Durio zibethinus) for effective shelf-life enhancement of preserved meat. Journal of Food Processing and Preservation, 45 (9). pp. 1-10. ISSN Print (1745-4549); online (0145-8892). (Published)

Ramli, Mohd Syakirin and Ahmad, Hamzah and Irawan, Addie and Ibrahim, Nur Liyana (2021) Model-free tuning of laguerre network for impedance matching in bilateral teleoperation system. In: Lecture Notes in Electrical Engineering; 11th National Technical Symposium on Unmanned System Technology, NUSYS 2019 , 2 - 3 December 2019 , Kuantan, Malaysia. 329 -343., 666. ISSN 1876-1100 ISBN 978-981-15-5281-6 (Published)

Ramli, Muhammad Zaki and Nina Suhaity, Azmi and Ismail, Ahmad Faisal (2021) Association between socioeconomic status, dental caries status and body mass index of children from two preschools in Kuantan: A preliminary report. In: 20th Annual Scientific meetin and 22nd Annual General meeting of IADR MalSec Proceeding. Proceeding The Resilient Researcher: Innovating Research In The New Normal, 2 . International Association for Dental Research - Malaysia Section (IADR-MalSec), Selangor, pp. 1-3. ISBN 978-967-2623-20-5

Rashid, Mamunur and Bari, Bifta Sama and Hasan, Md Jahid and Mohd Azraai, Mohd Razman and Rabiu Muazu, Musa and Ahmad Fakhri, Ab. Nasir and Anwar, P. P. Abdul Majeed (2021) The classification of motor imagery response: an accuracy enhancement through the ensemble of random subspace k-NN. PeerJ Computer Science. pp. 1-31. ISSN 2376-5992. (Published)

Rashid, Mamunur and Bari, Bifta Sama and Norizam, Sulaiman and Mahfuzah, Mustafa and Md Jahid, Hasan and Islam, Md Nahidul and Naziullah, Shekh (2021) A hybrid environment control system combining EMG and SSVEP signal based on brain-computer interface technology. SN Applied Sciences, 3 (9). pp. 1-14. ISSN 2523-3971. (Published)

Rashid, Mamunur and Bari, Bifta Sama and Yusri, Yusup and Mohamad Anuar, Kamaruddin and Khan, Nuzhat (2021) A comprehensive review of crop yield prediction using machine learning approaches with special emphasis on palm oil yield prediction. IEEE Access, 9 (9410627). 63406 -63439. ISSN 2169-3536. (Published)

Rashid, Mamunur and Mahfuzah, Mustafa and Norizam, Sulaiman and Nor Rul Hasma, Abdullah and Rosdiyana, Samad (2021) Random subspace K-NN based ensemble classifier for driver fatigue detection utilizing selected EEG channels. Traitement du Signal, 38 (5). pp. 1259-1270. ISSN 0765-0019. (Published)

Rashid, Shah Samiur and Hasnat, Mustafa Abu and Mohd Hasbi, Ab. Rahim (2021) Ferromagnetic nanoparticles synthesis and functionalization for laccase enzyme immobilization. Materials Today: Proceedings. pp. 1-4. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Rassem, Taha H. and Al-Sewari, Abdul Rahman Ahmed Mohammed and Hassan Makbol, Nasrin Mohamed and Waheb Abdul Jabbar, Shaif Abdullah (2021) Digital verification and authentication system for test certificates (DVASTC-COVID-19). In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Ravindran, Nadarajan and Noorazliza, Sulaiman (2021) Comparative analysis in execution of machine learning in breast cancer identification: a review. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-10., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Rehman, Muhammad Zubair and Kamal Zuhairi, Zamli and Almutairi, Mubarak and Chiroma, Haruna and Aamir, Muhammad and Kader, Md. Abdul and Nazri, Mohd. Nawi (2021) A novel state space reduction algorithm for team formation in social networks. PLoS ONE, 16 (12). pp. 1-18. ISSN 1932-6203. (Published)

Ren, Chunya and Ting, Irene Wei Kiong and Kweh, Qian Long (2021) A value-added view of intellectual capital and financial performance in knowledge management: a case of Chinese insurance companies. International Journal of Learning and Intellectual Capital, 18 (2). pp. 188-218. ISSN 1479-4853 (print); 1479-4861 (online). (Published)

Rian, F. W. and Nawanir, Gusman and Fatimah, Mahmud (2021) Determinants for sustainable green product consumption: A glimpse from Peninsular Malaysia. In: AIP Conference Proceedings; 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020 , 26 - 27 November 2020 , Langkawi. pp. 1-2., 2347 (020170). ISSN 0094-243X ISBN 9780735441187 (Published)

Ridzuan, Ramli and Ong, Huei Ruey and Hong, Chi Shein and Khan, Maksudur R. and Yunus, R. M. and Rohaya, Mohamed Halim and Astimar, Abdul Aziz and Zawawi, Ibrahim and Islam, Muhammad Remanul (2021) Investigation on the effect of monoglyceride concentration on palm oil based alkyd resin preparation. Journal Of Oil Palm Research, 33 (2). 299 -306. ISSN 1511-2780. (Published)

Rodziah, Nazlan and Ismayadi, Ismail and Idza Riati, Ibrahim and Fadzidah, Mohd Idris and Mohamad Ashry, Jusoh and Khamirul Amin, Matori (2021) Electromagnetic wave absorbing characteristics of C/Co-Mn and C/Co-Zn doped barium hexaferrite sandwiched nanocomposites. International Journal of Nanotechnology (IJNT), 17 (11-12). pp. 757-770. ISSN 1475-7435 (print); 1741-8151 (online). (Published)

Rohana, Hamzah and Nurul Ain Fatehah, Baharuddin (2021) Pengurusan Diri Pelajar Luar Kampus – Cabaran Kehidupan Pencetus Pengalaman Bermakna. Penerbit UMP, Kuantan, Pahang. ISBN 978-967-2831-24-2

Rokiah, Othman and Mohd Arif, Sulaiman and Chong, B. W. and Wong, C. W. and Youventharan, Duraisamy and Putra Jaya, Ramadhansyah and Nadiatul Adilah, Ahmad Abdul Ghani (2021) Effect of different positions of hollow section on the high strength concrete beam. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-10.. ISSN 1755-1315 (Published)

Roney, Miah and Huq, AKM Moyeenul and Rullah, Kamal and Hazrulrizawati, Hamid and Syahrul, Imran and Islam, Md. Alimul and Mohd Fadhlizil Fasihi, Mohd Aluwi (2021) Virtual screening-based identification of Potent DENV-3 RdRp protease inhibitors via in-house usnic acid derivative database. Journal of Computational Biophysics and Chemistry, 20 (8). pp. 797-814. ISSN 2737-4173. (Published)

Rosdi, Daud and Kae, W. Y. and Mas Ayu, Hassan and Shah, A. (2021) Effect of thread profile variation on pullout and bending strength of a pedicle screw. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 - 20 Jan 2021 , Pekan, Malaysia. pp. 1-10., 1078 (1). ISSN 1757-899X (Published)

Rosdi, Daud and Kennedy, S. J. and Mas Ayu, Hassan and A., Shah (2021) Effect of thread profile on bending strength of pedicle screw. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME2021) , 19-20 January 2021 , Universiti Malaysia Pahang, Pekan, Malaysia. pp. 1-8., 1078 (012026). ISSN 1757-899X (Published)

Rosli, M. Arif Fikri and Pandey, A. K. and Samykano, M. and Sharma, Kamal and Selvaraj, Jeyraj and Abd Rahim, Nasrudin and Saidura, R. (2021) Thermal stability and light transmission capability of nano TiO2 enhanced phase change material as thermal energy storage. In: IOP Conference Series: Materials Science and Engineering; International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020) , 18 -19 December 2020 , Mathura, India. pp. 1-8., 1116 (012206). ISSN 1757-899X (Published)

Rosmawati, Naim and Goh, Pei Sean and Zinnirah, Nasir and Nadzirah, Mohd Mokhtar and Nor Amirah Safiah, Muhammad (2021) Recent progress and challenges in hollow fiber membranes for wastewater treatment and resource recovery. Membranes, 11 (11). pp. 1-15. ISSN 2077-0375. (Published)

Rostam, N. E. and Putra Jaya, Ramadhansyah and Md Rizal, Othman and Zack, L. E. H. and Mohd Haziman, W. I. (2021) Pervious concrete: The art of improving strength properties. In: IOP Conference Series: Earth and Environmental Science; 4th National Colloquium on Wind and Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012065). ISSN 1755-1315 (Published)

Ruslan, H. N. and Khairunisa, Muthusamy and Sharifah Maszura, Syed Mohsin and Kirgiz, M. S. (2021) Periwinkle shell as mixing ingredient in concrete: A review. Construction, 1 (2). pp. 21-30. ISSN 2785-8731. (Published)

Ruwaida, Abdul Rasid and Elamparithy, G. and Mazni, Ismail and Noorlisa, Harun (2021) The effects of additives on the pelletization of raw and torrefied food waste. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (2). pp. 1-6. ISSN 0126-8139. (Published)

Ruzinah, Isha and Rohayu, Jusoh and Hafizah, Ramli and Normardhati, Mustafa and Wan Mohd Hafizuddin, Wan Yussof and Khairunnaim, Azmi (2021) Waste to fuel mobile pyrolyser. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

S

S. K., Abdul Mudalip and M. N., Kathiman and N. A., Hashim and R., Che Man and Z. I. M., Arshad (2021) A short review on encapsulation of bioactive compounds using different drying techniques. Materials Today: Proceedings, 42 (1). pp. 288-296. ISSN 2214-7853. (Published)

S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2021) Application of Mahalanobis-Taguchi system in ascending case of methadone flexi dispensing (MFlex) program. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (1). pp. 117-128. ISSN 2636-9575. (Published)

S. K. M., Saad and S. N. A. M., Zaini and M. Y., Abu (2021) Application of Mahalanobis-Taguchi system in descending case of methadone flexi dispensing (MFlex) program. Journal of Modern Manufacturing Systems and Technology (JMMST), 4 (2). pp. 84-97. ISSN 2636-9575. (Published)

S. M., Rosdi and R., Mamat and Azri, Alias and Sudhakar, K. (2021) Effects of lean combustion on bioethanol-gasoline blends using turbocharged spark ignition engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9140-9148. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

S. M. Z., Nur Syafiqah and K. A., Masri and N. E., Jasni and M., Hasan (2021) Performance of stone mastic asphalt incorporating Kenaf fiber. In: IOP Conference Series: Earth and Environmental Science, International Conference of Sustainable Earth Resources Engineering 2020 , 19 June 2020 , Virtual mode, Universiti Malaysia Pahang, Malaysia. pp. 1-10., 641 (012001). ISSN 1755-1315 (Published)

S. N. A. M., Zaini and Abu, Mohd Yazid (2021) Measuring the Unused Capacity for Mature and Immature Area in Palm Oil Nursery Using Time Driven Activity-Based Costing. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 33-41.. ISSN 978-981-15-7309-5 (Published)

Saad, M.A. and N. H., Abdurahman and Rosli, Mohd Yunus (2021) Synthesis, characterization, and demulsification of water in crude oil emulsion via a corn oil-based demulsifier. Materials Today: Proceedings, 42 (1). pp. 251-258. ISSN 2214-7853. (Published)

Saad Mohsin, Abed (2021) Synthesis and characterization of a corn oil based demulsifier for crude oil emulsion. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Saadiah, Mohd Ali and Singh, Pramod Kumar and Ahmad Salihin, Samsudin (2021) Effect of C3H4O3 on band gap narrowing of proton conductive hybrid polymer electrolyte. Macromolecular Symposia, 397 (1). pp. 1-5. ISSN 1022-1360. (Published)

Saadiah, Mohd Ali and Singh, Pramod Kumar and Samsudin, Ahmad Salihin (2021) Effect of C3 H4 O3 on band gap narrowing of proton conductive hybrid polymer electrolyte. Macromolecular Symposia, 397 (1). pp. 1-2. ISSN 1521-3900. (Published)

Saari, Mohd Mawardi and Sulaiman, Mohd Herwan and Nurul Akmal, Che Lah and Aziz, Zulkifly and Sakai, Kenji and Kiwa, Toshihiko and Tsukada, Keiji (2021) Properties of single- and multi-core magnetic nanoparticles assessed by magnetic susceptibility measurements. Journal of Magnetism and Magnetic Materials, 528 (167812). pp. 1-9. ISSN 0304-8853. (Published)

Safwan, Shalbi and Norazlianie, Sazali and Muhammad Aliff Ashraff, Rosdi and Faridah, Mohamad Idris (2021) Study on mechanical and shielding properties of barite colemanite concrete. In: IOP Conference Series: Materials Science and Engineering, International Nuclear Science Technology and Engineering Conference (iNuSTEC 2020) , Selangor, Malaysia , 17-19 November 2020. pp. 1-10., 1106 (012009). ISSN 1757-899X (Published)

Safwan, Shalbi and Norazlianie, Sazali and Muhammad Aliff Ashraff, Rosdi and Faridah Mohamad, Idris (2021) Radiation measurement of boron neutron capture therapy research facility at T riga Mark-II research reactor Malaysia. IOP Conf. Series: Materials Science and Engineering, 1106 (012022). pp. 1-9. (Published)

Safwan, Shalbi and Norazlianie, Sazali and Wan Norharyati, Wan Salleh (2021) Measurement of neutron flux at thermal column using gold foil activation analysis and TLD detector: technical review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2 (83). pp. 25-43. ISSN 2289-7879. (Published)

Said Mohamed, Tarek Mohamed Mahmoud and Muhammad Amirul, Abdullah and Alqaraghuli, H. and Musa, Rabiu Muazu and Ahmad Fakhri, Ab Nasir and Mohd Azraai, Mohd Razman and Mohd Yazid, Bajuri and Anwar, P. P. Abdul Majeed (2021) The identification of significant mechanomyography time-domain features for the classification of knee motion. In: Recent Trends in Mechatronics Towards Industry 4.0. Lecture Notes in Electrical Engineering (730). Springer Verlag, Berlin, Germany, 313 -319. ISBN 978-981-33-4596-6

Saiedatul Akmal, Mohamed Sedek and Mohd Azmir, Arifin and Mimi Sakinah, Abdul Munaim (2021) Piper betle leaves extract adversely affect motility of pseudomonas aeruginosa. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 26-31. ISSN 2289-697X. (Published)

Sajith, Akhil Vinayak and Zakaria, M. A. and Baarath, K. and Anwar, P. P. Abdul Majeed (2021) A novel Bezier curve control point search algorithm for autonomous navigation using N-order polynomial search with boundary conditions. In: 2021 IEEE International Intelligent Transportation Systems Conference (ITSC) , 19-22 September 2021 , Indianapolis, IN, USA. 3884 -3889., 2021. ISSN 978-172819142-3 (Published)

Sakib, Md. Nazmus and Asif Iqbal, AKM and Muhammad Nuruzzaman, Dewan (2021) Mechanical characterization of Carbon Fibre and Graphene Oxide Reinforced Epoxy Hybrid Composite. In: Lecture Notes in Mechanical Engineering. Lecture Notes in Mechanical Engineering book series (LNME . Springer Singapore, https://link.springer.com/bookseries/11236, pp. 155-161. ISBN 978-981-15-9505-9

Sakib, Md. Nazmus and Iqbal, AKM Asif (2021) Epoxy based nanocomposite material for automotive application- a short review. International Journal of Automotive and Mechanical Engineering, 18 (3). pp. 9127-9140. ISSN 2229-8649. (Published)

Saleem, Ali Ba and R., Mamat and Hagos, F. Y. and Abdul Adam, Abdullah and A., Arman (2021) Investigation of the stability of cerium oxide in diesel fuel for nano-enhanced fuel formulation. In: 2nd Energy Security and Chemical Engineering Congress (ESChE 2021 ) , 3-5 November, 2021 , Universiti Malaysia Pahang, Kampus Gambang.. pp. 1-8.. ISBN AIPCP22-AR-ESCHE2021-00024 (Published)

Salim, Ghassan Maan and Mohd Anwar, Zawawi (2021) Optical goniometer for knee joint angle continuous monitoring. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Salleh, N. F. M. and Asmori, F. F. and Shukri, N. M. and Hanafiah, S. F. M. (2021) Adsorption of methylene blue by imperata cylindrica: Reaction optimization by response surface methodology (RSM). Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (2). pp. 27-33. ISSN 0126-8139. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and M., Samykano and W. S. W., Harun and G., Najafi and M., Mofijur and Mohamed, Mazlan (2021) A systematic review on graphene-based nanofluids application in renewable energy systems: Preparation, characterization, and thermophysical properties. Sustainable Energy Technologies and Assessments, 44 (101508). pp. 1-24. ISSN 2213-1388. (Published)

Sandhya, Madderla and D., Ramasamy and K., Sudhakar and K., Kadirgama and W. S. W., Harun (2021) Ultrasonication an intensifying tool for preparation of stable nanofluids and study the time influence on distinct properties of graphene nanofluids – a systematic overview. Ultrasonics Sonochemistry, 73 (105479). pp. 1-16. ISSN 1350-4177. (Published)

Santhi, Ulakanathan (2021) Synthesis and physical property characterization of nickel nanowires. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sarah Alyaa, Mohd Khaidi (2021) Bass diffusion and grey models to forecast new tourism product: a case study of Tanah Aina Resort in Malaysia. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Abu, Noratikah).

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Response Surface Methodology to Predict the Effects of Graphene Nanoplatelets Addition to Diesel Engine Performance. In: International Conference on Alternative Fuels and Electric Vehicles 2021 , 9-10 December 2021 , Pune, India (Virtual). . (Published)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) A Review of fuel additives' effects and predictions on internal combustion engine performance and emissions. AIMS Energy. (In Press / Online First) (In Press / Online First)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on Graphene Application: Focus on Application as Additive in Internal Combustion Engine. In: International Conference on Technical and Vocational Education and Training (IConTVET 2021) , 4-5 February 2021 , Langkawi (Virtual Mode). . (Unpublished) (Unpublished)

Sarbani, Daud and Mohd Adnin, Hamidi and R., Mamat (2021) Review on The Effect of Alcohol Usage as A Fuel Additive in Internal Combustion Engine. International Journal of Advanced Trends in Computer Science and Engineering, 10 (6). pp. 3165-3172. ISSN ISSN 2278-3091. (Published)

Sarwar, T. B. and Noor, N. M. and Saef Ullah Miah, M. and Rashid, M. and Farid, F.A. and Husen, M. N. (2021) Recommending research articles: A multi-level chronological learning-based approach using unsupervised keyphrase extraction and lexical similarity calculation. IEEE Access, 9. pp. 160797-160811. ISSN 2169-3536. (Published)

Sarwar, Talha and Mohd Noor, Noorhuzaimi Karimah (2021) An experimental comparison of unsupervised keyphrase extraction techniques for extracting significant information from scientific research articles. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24 - 26 August 2021 , Pekan, Online. 130 -135.. ISBN 9781665414074 (Published)

Seman, M. A. and Sharifah Maszura, Syed Mohsin and Zaidi, A. M. A. and Jaini, Z. M. (2021) Numerical investigation of steel reinforcement arrangement in reinforced concrete wall subjected to blast. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-8., 682 (012039). ISSN 1755-1307 (Published)

Seydametova, Emine and Norazwina, Zainol (2021) Morphological, physiological, biochemical and molecular characterization of statin-producing penicillium microfungi isolated from little-explored tropical ecosystems. Current Research in Microbial Sciences, 2 (100044). pp. 1-8. ISSN 2666-5174. (Published)

Shah, L. Amer and Jolius, Gimbun and S., Nurdin (2021) Microwave assisted transesterification of waste cooking oil using immobilized lipase enzyme. In: 4th International Conference on Chemical and Bioprocess Engineering in conjunction with 26th Symposium of Malaysian Chemical Engineers (SOMChE-ICCBPE-2012) , 21-23 November 2012 , Kota Kinabalu, Sabah Malaysia. pp. 1-9.. (Published)

Shahoodh, M. K. and Mohd Sham, Mohamad and Yuhani, Yusof and Sahimel Azwal, Sulaiman (2021) Some properties of compatible action graph. Data Analytics and Applied Mathematics (DAAM), 2 (1). pp. 20-27. ISSN 2773-4854. (Published)

Shalyda, Md Shaarani and Min, L. Y. and Man, R. C. and Siti Kholijah, Abdul Mudalip and Siti Zubaidah, Sulaiman and Zatul Iffah, Mohd Arshad (2021) Effects of enzyme loading, incubation time and incubation temperature on sawdust hydrolysis by locally produced bacterial xylanase. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 14-22. ISSN 0126-8139. (Published)

Shanono, Ibrahim Haruna and Muhammad, Aisha (2021) Hybrid electric vehicles: a mini overview. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 27-36. ISSN 2636-9575. (Published)

Sharfah Ratibah, Tuan Mat and Mohd Faizal, Ab Razak and M. N. M., Kahar and Juliza, Mohamad Arif and Salwana, Mohamad and Ahmad, Firdaus (2021) Towards a systematic description of the field using bibliometric analysis: malware evolution. Scientometrics, 126. pp. 2013-2055. ISSN 0138-9130. (Published)

Sharfah Ratibah, Tuan Mat and Mohd Faizal, Ab Razak and M. N. M., Kahar and Juliza, Mohamad Arif and Salwana, Mohamad and Ahmad Firdaus, Zainal Abidin (2021) Towards a systematic description of the feld using bibliometric analysis. Scientometrics, 126 (3). 2013 -2055. ISSN 1588-2861. (Published)

Sharfah Ratibah, Tuan Mat and Mohd Faizal, Ab Razak and Mohd Nizam, Mohmad Kahar and Juliza, Mohamad Arif (2021) A Bayesian probability model for Android malware detection. ICT Express. pp. 1-8. ISSN 2405-9595. (In Press / Online First) (In Press / Online First)

Sharfah Ratibah, Tuan Mat and Mohd Faizal, Ab Razak and Mohd Nizam, Mohmad Kahar and Juliza, Mohamad Arif and Azlee, Zabidi (2021) Applying Bayesian probability for Android malware detection using permission features. In: IEEE 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan, Pahang, Malaysia. pp. 574-579.. ISBN 978-1-6654-1407-4 (Published)

Sharifah Hafizah, Syed Ahmad Ubaidillah and Noraziah, Ahmad and Alkazemi, Basem Y. (2021) An efficient data replication technique with fault tolerance approach using BVAG with checkpoint and rollback-recovery. International Journal of Advanced Computer Science and Applications (IJACSA), 12 (1). 473 -480. ISSN 2158-107X ; 2156-5570(Online). (Published)

Sharifah Sakinah, Syed Abd Mutalib and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2021) Comparison of Robust Estimators’ Performance for Detecting Outliers in Multivariate Data. Journal of Statistical Modeling and Analytics, 3 (3). pp. 36-64. ISSN 2180-3102. (Published)

Sharifah Sakinah, Syed Abd Mutalib and Siti Zanariah, Satari and Wan Nur Syahidah, Wan Yusoff (2021) Comparison of robust estimators for detecting outliers in multivariate datasets. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-10., 1988 (012095). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Sheng, Guang Heng and Rosdiyana, Samad and Mahfuzah, Mustafa and Zainah, Md. Zain and Nor Rul Hasma, Abdullah and Dwi, Pebrianti (2021) Classification of facial part movement acquired from Kinect V1 and Kinect V2. In: Lecture Notes in Electrical Engineering; 11th National Technical Symposium on Unmanned System Technology, NUSYS 2019 , 2 - 3 December 2019 , Kuantan, Malaysia. 911 -924., 666. ISSN 1876-1100 ISBN 9789811552816 (Published)

Sia, Yiik Swan and Chern, Zi Wei and Hii, Siew Ping and Tiu, Zi Bao and Mohd Azmir, Arifin (2021) Antimicrobial activity against pathogenic bacteria, antioxidant and cytotoxic activity of cosmos caudatus. International Journal of Engineering Technology And Sciences (IJETS), 7 (1). pp. 32-43. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Sikandar, Tasriva and Rabbi, Mohammad F. and Kamarul Hawari, Ghazali and Altwijri, Omar and Alqahtani, Mahdi and Almijalli, Mohammed and Altayyar, Saleh and Ahamed, Nizam U. (2021) Using a deep learning method and data from two-dimensional (2D) marker-less video-based images for walking speed classification. Sensors, 21 (8). pp. 1-16. ISSN 1424-8220. (Published)

Siti Farah Haryatie, Mohd Kanafiah and Abdul Rahman, Mohd Kasim and Nur Syamilah, Arifin and Syazwani, Zokri and Noor Amalina Nisa, Ariffin and Mohammed Al-Sharifi, Hussein Ali (2021) Impact of align magnetic field on viscous flow with combined convective transport. JP Journal of Heat and Mass Transfer, 23 (1). 127 -137. ISSN 0973-5763. (Published)

Siti Hajar, Mohd Khairuddin and Muhammad Azrin, Ahmad and Noraziah, Adzhar (2021) Application of Automata Theory On n-th Order Limit Language. Review of International Geographical Education, 11 (4). pp. 817-824. ISSN 2146-0353. (Published)

Siti Hamidah Radiyah, Shiekh Mahmud (2021) The study on plant hormones and spent mushroom compost on the growth of ficus carica. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Hanani, Mat Yasin and Muhammad Khairul Anuar, Mohamed and Zulkhibri, Ismail and Widodo, Basuki and Mohd Zuki, Salleh (2021) Numerical method approach for magnetohydrodynamic radiative ferrofluid flows over a solid sphere surface. Thermal Science, 25 (2). pp. 379-385. ISSN 0354-9836. (Published)

Siti Hawa, Apandi and Jamaludin, Sallim and Rozlina, Mohamed (2021) Data pre-processing of website browsing record: An initial step for web page classification. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24-26 Aug. 2021 , Pekan, Malaysia. pp. 679-684.. ISSN 978-166541407-4 ISBN 978-1-6654-1408-1 (Published)

Siti Hawa, Apandi and Jamaludin, Sallim and Rozlina, Mohamed and Araby, Madbouly (2021) Web page classification using convolutional neural network (CNN) towards eliminating internet addiction. In: IEEE International Conference on Software Engineering Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) 2021 , 24-26 Ogos 2021 , Pekan, Pahang, Malaysia. pp. 1-6.. ISBN 978-1-6654-1407-4 (Published)

Siti Maharah, Abdul Khalim (2021) The implementation of environmental management system (ems) in construction project : investigation of success factors. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Maizatul Ameera, Azhar and Ahmad Salihin, Samsudin and Wan Norfazilah Wan, Ismail and Nurlin, Abu Samah (2021) Kinetic modeling characterization of cellulose modified surface for methylene blue removal from aqueous media. Macromolecular Symposia, 397 (1). pp. 1-2. ISSN 1022-1360. (Published)

Siti Nabihah, Othman and Norazaliza, Mohd Jamil (2021) A modified predictive model for colour changes in French fries during frying. In: Journal of Physics: Conference Series; Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28 - 29 July 2021 , Kuantan, Pahang. pp. 1-11., 1988 (1). ISSN 1742-6596 (Published)

Siti Nabihah, Othman and Norazaliza, Mohd Jamil (2021) A modified predictive model for colour changes in French fries during frying. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-10., 1988 (012030). ISSN 1742-6596 (Published)

Siti Nor Azlina, Mohd Ghazali and Muhamad Zahim, Sujod and Mohd Shawal, Jadin (2021) Forensic of Solar PV: A review of potential faults and maintenance strategies. In: 7th International Conference on Engineering and Emerging Technologies, ICEET 2021 , 27-28 October 2021 , Istanbul, Turkey. pp. 1-6.. ISSN 2409-2983 ISBN 978-166542714-2 (Published)

Siti Noraishah, Ismail and Azizan, Ramli (2021) Does Human Factor Contribute to Mining Accidents? A Systematic Literature Review Approach. In: Human-Centered Technology for a Better Tomorrow. Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 593-599. ISBN 978-981-16-4114-5

Siti Noraishah, Masoum Raman (2021) Synthesis of modified rice husk activated carbon and study on their carbon dioxide (co2) adsorption capacity. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Siti Nora’Aeshah, Zakaria and Mohamad Hilmi, Mat Said (2021) Analisis Pandangan Ulama yang Menerima dan Menolak Tafsiran Ayat Al-Quran menggunakan Metodologi Ishari. Journal of Islamic, Social, Economics and Development (JISED), 6 (41). pp. 42-54. ISSN 0128-1755. (Published)

Siti Nur Alwani, Shafie and Nik Abdul Hadi, Md Nordin and Muhammad Roil, Bilad and Nurasyikin, Misdan and Norazlianie, Sazali and Zulfan Adi, Putra and Mohd Dzul Hakim, Wirzal and Alamin, Idris and Juhana, Jaafar and Zakaria, Man (2021) [EMIM][Tf2N]-Modified silica as filler in mixed matrix membrane for carbon dioxide separation. Membranes, 11 (371). pp. 1-14. ISSN 2077-0375. (Published)

Siti Sarah, Sukor and Zuraina, Ali (2021) An Overview of Knowledge Management in Early Childhood Education for Sustainable Education. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. , 1092 (012010). ISSN 1757-899X (Published)

Siti Zanariah, Satari and Nur Faraidah, Muhammad Di and Yong Zulina, Zubairi and Abdul Ghapor, Hussin (2021) Comparative study of clustering-based outliers detection methods in circular-circular regression model. Sains Malaysiana, 50 (6). pp. 1787-1798. ISSN 0126-6039. (Published)

Siti Zun Nurain, Mohd Ali and Intan Suhana, Mohd Razelan (2021) Exploration of risky riding behaviour among young motorcyclist. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan, Pahang, Malaysia. pp. 1-14., 1092 (012074). ISSN 17578981 (Printed); 1757899X (Online) (Published)

Slamet, Slamet and Izzeldin, Ibrahim Mohamed (2021) Network intrusions classification using data mining approaches. Journal of Theoretical and Applied Information Technology, 99 (7). pp. 1679-1692. ISSN 1992-8645 (print); 817-3195 (online). (Published)

Sofiah, A. G. N. and Samykano, M. and Shahabuddin, S. and Kadirgama, K. and Pandey, A. K. and Noor, M. M. (2021) A brief review on thermal behaviour of PANI as additive in heat transfer fluid. Emerging Advances in Integrated Technology, 2 (1). 47 -52. ISSN 2773-5540. (Published)

Sofiah, A. G. N. and Samykano, Mahendran and Pandey, A. K. and Kadirgama, K. (2021) Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments, 48 (101635). pp. 1-32. ISSN 2213-1388. (Published)

Solahuddin, Azuwa (2021) A Review Paper on Load-Deflection Behaviour of Kenaf Fibre Reinforced Concrete Beam and Slab. International Journal of Innovative Science, Engineering & Technology, 8 (1). pp. 267-276. ISSN 2348-7968. (Published)

Solahuddin, Azuwa (2021) A Review on Structural Performance of Fly Ash Reinforced Concrete Beam. International Journal of Innovative Science, Engineering & Technology, 8 (2). pp. 132-135. ISSN 2348-7968. (Published)

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) Effect of Shredded Waste Paper on Properties of Concrete. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-9., 682 (012006). ISSN 1755-1315 (Published)

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) Load-Strain Behaviour of Shredded Waste Paper Reinforced Concrete Beam. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan Pahang, Malaysia. pp. 1-11., 1092 (012063). ISSN 1757-899X (Published)

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) A Review Paper on The Effect of Waste Paper on Mechanical Properties of Concrete. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22-23 December 2020 , Pekan Pahang, Malaysia. pp. 1-7., 1092 (012067). ISSN 1757-899X (Published)

Solahuddin, Azuwa and Fadzil, Mat Yahaya (2021) Structural Behaviour of Shredded Waste Paper Reinforced Concrete Beam. International Journal of Advanced Research in Engineering Innovation (IJAREI), 3 (1). pp. 74-87. ISSN 2682-8499. (Published)

Son Ali, Akbar and Kamarul Hawari, Ghazali and Habsah, Hasan and Zeehaida, Mohamed and Wahyu Sapto, Aji (2021) An enhanced classification of bacteria pathogen on microscopy images using deep learning. In: 4th International Seminar on Research of Information Technology and Intelligent Systems, ISRITI 2021 , 16 December 2021 , Virtual, Yogyakarta. 119 -123.. ISBN 978-166540151-7 (Published)

Soubam, Triveni and Gupta, Arun (2021) Eco-friendly natural rubber latex and modified starch-based adhesive for wood-based panels application- A review. Maejo International Journal of Energy and Environmental Communication, 3 (1). pp. 49-53. ISSN 2673-0537. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Effect of PV material, texturing, orientation and tracking on glare impact: A simulation study from an Indian airport. Cleaner Engineering and Technology, 4 (100236). pp. 1-11. ISSN 2666-7908. (Published)

Sreenath, S. and Sudhakar, K. and Ahmad Fitri, Yusop (2021) Suitability analysis of solar tracking PV system in the airport based on glare assessment. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (3). pp. 9061-9070. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Sudarmaningtyas, Pantjawati and Rozlina, Mohamed (2021) A review article on software effort estimation in agile methodology. Pertanika Journal of Science & Technology (JST), 29 (2). 837 -861. ISSN 0128-7680. (Published)

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and 2-Opt Operator. In: IEEE 19th Student Conference on Research and Development (SCOReD 2021) , 23-25 November 2021 , Kota Kinabalu, Malaysia. pp. 91-95.. ISBN 978-1-6654-0193-7 (Published)

Suhazri Amrin, Rahmad and Zuwairie, Ibrahim and Zulkifli, Md. Yusof (2021) A Modified Simulated Kalman Filter Optimizer with State Measurement, Substitution Mutation, Hamming Distance Calculation, and Swap Operator. In: IEEE International Conference on Computer System, Information Technology, and Electrical Engineering (COSITE 2021) , 20-21 October 2021 , Banda Aceh, Indonesia. pp. 181-185.. ISBN 978-1-6654-2509-4 (Published)

Sukor, N. F. and Selvam, V. Panner and Jusoh, Rohayu and Kamarudin, N. S. and Abd Rahim, Syarifah (2021) Intensified DES mediated ultrasound extraction of tannic acid from onion peel. Journal of Food Engineering, 296 (110437). pp. 1-11. ISSN 0260-8774. (Published)

Sukumaran, Sreenath and Sudhakar, Kumarasamy and Ahmad Fitri, Yusop (2021) A Novel tool for sustainability assessment of energy projects. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Sulaiman H., A. J. and Aiman, M. H. and Ishak, M. and Quazi, M. M. and Zaharinie, T. and Ariga, T. (2021) Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8601-8607. ISSN 2231-8380 (online). (Published)

Suliana, Ab Ghani (2021) Online auto-tuned proportional-integral controller using particle swarm optimization for dual active bridge DC-DC converter. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Sumaya, Sarmin and Tarek, Mostafa and Selvaraj Mohana, Roopan and Chin, Kui Cheng and Khan, Maksudur R. (2021) Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater. Journal of Hazardous Materials, 415 (125587). pp. 1-10. ISSN 0304-3894. (Published)

Sunil, Vaishak and Ling, Jin Kiong and Yasin, Amina and Izan Izwan, Misnon and Rajan, Jose (2021) Pfibrolizer: A new paradigm for large scale electrospinning from lessons learnt from Malaysian kitchen. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Surenthiran, Gnanasekaran and Nor Ida Amalina, Ahamed Nordin and Mimi Maisarah, Mahadi @ Hamidi and Jun Haslinda, Shariffuddin (2021) Effect of Alkaline treatment on the characteristics of pineapple leaves fibre and PALF/PP biocomposite. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). pp. 8518-8528. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Suriati, Ghazali and Wei, Jian Goh and Siti Nur Ainda, Mazlan and Syarifah, Abd Rahim and Saidatul Shima, Jamari (2021) Evaluation of acrylic acid-co-acrylamide ratio on swelling kinetics and diffusion behavior. Emerging Materials Research, 10 (1). pp. 103-109. ISSN 2046-0147. (Published)

Suriyati, Saleh and Noor Asma Fazli, Abdul Samad (2021) Effects of gasification temperature and equivalence ratio on gasification performance and tar generation of air fluidized bed gasification using raw and torrefied empty fruit bunch. Chemical Engineering Transactions, 88. pp. 1-6. ISSN 2283-9216. (Published)

Suryanti, Awang and Nur Syafiqah, Mohd Nafis (2021) Performance evaluation of hybrid feature selection technique for sentiment classification based on food reviews. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021 , 24 - 26 Aug. 2021 , Pekan, Malaysia. 172 -176. (171807). ISBN 978-166541407-4 (Published)

Syafiqah Hanis, Mohd Fauzi (2021) Wastewater treatment process: a modified model for oxidation pond. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Norazaliza, Mohd Jamil).

Syafiqah Hanis, Mohd Fauzi and Norazaliza, Mohd Jamil (2021) Wastewater treatment process: a modified mathematical model for oxidation ponds. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (1). pp. 76-86. ISSN 2289-7879. (Published)

Syahrulanuar, Ngah (2021) Field programmable gate array based sigmoid function implementation using differential lookup table and second order nonlinear function. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Rohani, Abu Bakar).

Syarifah Nur Hasanah, Syed Kamarudin and Lee, Helen and Ismayuzri, Ishak and Ahmad Rosli, Abdul Manaf and Ahmad Shahir, Jamaludin and Mohd Ali Hanafiah, Shaharudin and Mohd Zairulnizam, Mohd Zawawi (2021) Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0: Selected Articles from iM3F 2020, Malaysia , 6 August 2020 , Virtually hosted by Universiti Malaysia Pahang. pp. 669-675.. ISBN 978-981-15-9505-9 (Published)

Syarifah Zyurina, Nordin and Farhana, Johar and Noratikah, Abu (2021) Linear programming model for investment problem in maximizing the total return. In: Journal of Physics: Conference Series; 28th Simposium Kebangsaan Sains Matematik, SKSM 2021 , 28-29 July 2021 , Kuantan, Pahang, Virtual. pp. 1-10., 1988 (012064). ISSN 1742-6588 (Published)

Syazwan Nizam, Moni and Edriyana, Abd Aziz and Anwar P. P., Abdul Majeed and Marlinda, Malek (2021) The prediction of blue water footprint at Semambu water treatment plant by means of Artificial Neural Networks (ANN) and Support Vector Machine (SVM) models Machine (SVM) models. Physics and Chemistry of the Earth, 123 (103052). pp. 1-7. ISSN 1474-7065. (Published)

T

Tabassum, Shabana and Norhayati, Rosli and Arief Ichwan, Solachuddin Jauhari and Mishrad, Puranjan (2021) Thymoquinone and its pharmacological perspective: A review. Pharmacological Research - Modern Chinese Medicine, 1 (100020). pp. 1-10. ISSN 2667-1425. (Published)

Tabassum, Shabana and Norhayati, Rosli and Wastuti Hidayati, Suriyah and Solachuddin Jauhari, Arief Ichwan (2021) Stochastic modelling of the oral cancer proliferation and death in the presence of Thymoquinone as anticancer therapeutics. In: Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 29-18 July, 2021 , Kuantan. pp. 1-8., 1988 (012007). (Published)

Tagod, Manal and Adeleke, A. Q. and Moshood, Taofeeq D. (2021) Coercive pressure as a moderator on organizational structure and risk management: empirical evidence from Malaysian construction industry. Journal of Safety Research, 77. pp. 139-150. ISSN 0022-4375. (Published)

Taj Abbasi, Wajahat and Ainol Haryati, Ibrahim and Fatimah, Ali (2021) Barriers to technology integration in teaching English as a second language among English educators in Pakistan. International Journal of Language Education and Applied Linguistics (IJLEAL), 11 (2). pp. 36-44. ISSN 2289-7208 (print); 2289-9294 (online). (Published)

Tanushan, S. and Noraini, Mohd Razali (2021) An investigation into lean practices and their impact on sustainability performance in the latex glove manufacturing industry. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (2). pp. 15-21. ISSN 2636-9575. (Published)

Tao, Hai and Wang, Jing and Yaseen, Zaher Mundher and Mohammed, Muamer N. and Jasni, Mohamad Zain (2021) Shrewd vehicle framework model with a streamlined informed approach for green transportation in smart cities. Environmental Impact Assessment Review, 87 (106542). pp. 1-11. ISSN 0195-9255. (Published)

Tawafak, R. M. and AlFarsi, G. and Jabbar, J. and Malik, S. I. and Mathew, R. and AlSidiri, A. and Shakir, M. and Romli, A. (2021) Impact of technologies during COVID-19 pandemic for improving behavior intention to use e-learning. International Journal of Interactive Mobile Technologies (iJIM), 15 (1). pp. 184-198. ISSN 1865-7923. (Published)

Tay, Joo Hui and Nurhameeza, Zakaria (2021) Heavy metals in private car dust collected from Universiti Malaysia Pahang, Gambang Campus: Contamination and human health risks. Current Science and Technology (CST), 1 (2). pp. 52-57. ISSN 2785-8804. (Published)

Tay, Joo Hui and Nurhameeza, Zakaria (2021) Heavy metals in private car dusts collected from Universiti Malaysia Pahang, Gambang Campus: Contamination and human health risks. Current Science and Technology (CST), 1 (2). pp. 52-57. (Published)

Tay, Joo Hui and Siti Aqilah, Azmi and Mohd Iffat Iqbal, Zul Kornain (2021) Heavy metal in different size fractions of household dust collected from rural residential area of Simpang Renggam, Johor. Malaysian Journal of Analytical Sciences, 25 (6). pp. 911-920. ISSN 13942506. (Published)

Tedi, Hidayat and Rahmi, Fahmy and Dessy, Kurnia Sari and Mergeresa, Fineke and Fernando, Yudi (2021) COVID-19 outbreak effects on leadership, job satisfaction and turnover intention: A mediating model of Indonesian banking sector. International Journal of Industrial Management (IJIM), 10 (1). pp. 113-128. ISSN 2289-9286 (Print); 0127-564x (Online). (Published)

Teo, K. Y. and Suriati, Ghazali and Syarifah, Abd Rahim (2021) Preliminary study on pelletization of oil palm empty fruit bunches (EFB)/spent activated carbon (AC): Effect of mixing and adhesive ratio. Journal of Chemical Engineering and Industrial Biotechnology (JCEIB), 7 (1). pp. 37-41. ISSN 0126-8139. (Published)

Thalji, Mohammad R. and Ibrahim, Amal Amin and Ali, Gomaa A. M. (2021) Cutting-edge development in dendritic polymeric materials for biomedical and energy applications. European Polymer Journal, 160 (110770). pp. 1-25. ISSN 0014-3057. (Published)

Thangavel, Mythili and Chin, Sim Yee (2021) Gas chromatography analysis for the performance evaluation of the palm oil cross-metathesis using 1-octene. Maejo International Journal of Energy and Environmental Communication, 3 (3). pp. 40-44. ISSN 2673-0537. (Published)

Thong, Ofellia and Amirah, Ibrahim and Hussien, Abdul Rahim and Weng, Jun Yong and Norasyikin, Ismail (2021) A review of crude oil extraction methods from petroleum sludge. International Journal of Engineering Technology And Sciences (IJETS), 8 (1). pp. 40-50. ISSN 2289-679X (Print); 2462-1269 (Online). (Published)

Thurga Devi, Munusamy and Chin, S. Y. and Tarek, Mostafa and Khan, Maksudur R. (2021) Sustainable hydrogen production by CdO/exfoliated g-C3N4 via photoreforming of formaldehyde containing wastewater. Materials Today: Proceedings, 46 (60). pp. 30988-30999. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Thurga Devi, Munusamy and Chin, Sim Yee and Khan, Maksudur R. (2021) Physicochemical and electrochemical characterization of CdO/g-C3N4 nanocomposite for the photoreforming of petrochemical wastewater. Materials Today: Proceedings, 42 (Part1). pp. 15-21. ISSN 2214-7853. (Published)

Thurga Devi, Munusamy and Khan, Maksudur R. and Chin, Sim Yee (2021) Photoelectrochemical performance of P@MoS2 for hydrogen evolution reaction. Materials Today: Proceedings. pp. 1-5. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Thurga Devi, Munusamy and Sim, Yee Chin and Khan, Md. Maksudur Rahman (2021) Photoreforming hydrogen production by carbon doped exfoliated g-C3N4: Optimization using design expert®software. In: Materials Today: Proceedings, International Symposium of Reaction Engineering, Catalysis & Sustainable Energy (RECaSE 2021) , 6 April 2021 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1-7., 57 (Part 3). ISSN 2214-7853 (Published)

Ting, Irene Wei Kiong and Lu, Wen-Min and Kweh, Qian Long and Ren, Chunya (2021) Value-added intellectual capital and productive efficiencies: Evidence from Taiwan listed electronics companies. International Journal of Emerging Markets, 18 (9). pp. 2816-2838. ISSN 1746-8809. (Published)

Tiong, Meng Chung (2021) Hybrid moth flame optimization mppt algorithm for accurate real-time tracking under partially shaded photovoltaic system. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Toma, Farhana Sultana and Zulkifly, Jemaat and Beg, M. D. H. and Khan, M R and R. M., Yunus (2021) Comparison between lignin extraction by alkaline and ultrasound-assisted alkaline treatment from oil palm empty fruit bunch. IOP Conference Series: Materials Science and Engineering, 1095 (012027). pp. 1-10. ISSN 1757-8981(Print); ISSN: 1757-899X (Online). (Published)

Tong Kong, Yee and Kutty, Rajaletchumy V. (2021) Physical characterization of propolis encapsulated vitamin E TPGS as nanomedicine (Corrected Proof). Materials Today: Proceedings. ISSN 2214-7853. (In Press / Online First) (In Press / Online First)

Tran, Ngoc Thang and P. Senthil, Kumar and Le, Quyet Van and Cuong, Nguyen Van and Phuong, Pham T. T. and A. A., Jalil and Sharma, Gaurav and Kumar, Amit and Sharma, Ajit and Ayodele, Bamidele Victor and Sumaiya, Zainal Abidin and Vo, Dai‑Viet N (2021) CO2 reforming of CH4 on mesoporous alumina‑supported cobalt catalyst: optimization of lanthana promoter loading. Topics in Catalysis. pp. 1-11. (Published)

Tran, Ngoc Thang and Pham, Thong Le Minh and Nguyen, Trinh Duy and Cuong, Nguyen Van and Siang, Tan Ji and Phuong, Pham T.T. and A.A., Jalil and Truong, Quang Duc and Sumaiya, Zainal Abidin and Hagos, Ftwi Y. and Sonil, Nanda and N. Vo, Dai-Viet (2021) Improvements in hydrogen production from methane dry reforming on filament-shaped mesoporous alumina-supported cobalt nanocatalyst. International Journal of Hydrogen Energy, 46 (48). pp. 24781-24790. ISSN 0360-3199. (Published)

Tristan Law, Lee Kien and Dahawi, Yahya Ayesh and Siti Noredyani, Abdul Rahman and Abdulhalim, Abdulrazik (2021) Simulation and optimisation for production of biogas from palm oil mill effluent (POME) using aspen plus. International Journal of Biomass and Renewables (IJBR), 10 (2). pp. 9-17. ISSN 2289-1692. (Published)

U

Ullah, Mehfooz and Khan, Muhammad Waris Ali and Lee, Chia Kuang (2021) Role of project governance in managing projects sustainability: A theoretical perspective. In: ICCOEE 2021: Proceedings of the International Conference on Civil, Offshore and Environmental Engineering , 13-15 June 2020 , Kuching, Malaysia. pp. 789-798., 132. ISBN 978-981-33-6311-3 (Published)

Umi Kalsom, Masrom and Nik Mohd Alwi, Nik Aloesnita (2021) Blended learning impact on higher education: What have research revealed? In: Enhancing the teaching and learning of English at Malaysian tertiary education. Penerbit Universiti Sultan Zainal Abidin, Kuala Nerus, Terengganu, pp. 31-54. ISBN 978-967-2231-79-0

Umi Rabiatul Ramzilah, P. Remli (2021) Photocatalytic degradation of methylene blue by cqds based composite derived from watermelon rinds. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Ummu Afeera, Zainulabid and Norhidayah, Kamarudin and Ahmad Hafiz, Zulkifly and Gan, Han Ming and Tay, Darren Dean and Siew, Shing Wei and Aini Syahida, Mat Yassim and Sharmeen Nellisa, Soffian and Ahmad Afif, Mohd Faudzi and Ahmad Mahfuz, Gazali and Gaanty Pragas, Maniam and Hajar Fauzan, Ahmad (2021) Near-complete genome sequences of Nine SARS-CoV-2 strains harboring the D614G mutation in Malaysia. ASM Journals Microbiology Resource Announcements, 10 (31). pp. 1-3. (Published)

Urbi, Zannat and Nina Suhaity, Azmi and Hossain, Md. Sanower (2021) Antimicrobial role of glycosaminoglycan’s: beyond bacterial adhesion to host cell. In: The 1st International Electronic Conference on Antibiotics (ECA 2021). The 1st International Electronic Conference on Antibiotics (ECA 2021) , 8–17 May 2021 , Virtual, Online. pp. 1-4.. (Published)

Usarov, Komiljon and Ahmedov, Anvarjon A. and Abasiyanik, Mustafa Fatih and Ku Muhammad Naim, Ku Khalif and Akhmedov, Abdulkasim (2021) The prevalence of helicobacter pylori in referral population of Turkey. In: Journal of Physics: Conference Series, Simposium Kebangsaan Sains Matematik ke-28 (SKSM28) , 28-29 July 2021 , Kuantan, Pahang, Malaysia. pp. 1-8., 1988 (012092). ISSN 1742-6588 (Published)

Usop, Nur Alya Afikah and Hisham, Syifak Izhar (2021) A review of digital watermarking techniques, characteristics and attacks in text documents. In: Advances in Robotics, Automation and Data Analytics. Advances in Intelligent Systems and Computing, 1350 (1350). Springer, Switzerland, pp. 256-271. ISBN 978-3-030-70916-7

V

Vaishak, Sunil and Bhupender, Pal and Izwan, Misnon and Rajan, Jose (2021) Characterization of supercapacitive charge storage device using electrochemical impedance spectroscopy. In: Materials Today: Proceedings, Innovative Manufacturing, Mechatronics & Materials Forum 2020 , 6 August 2020 , Virtual Conference, Universiti Malaysia Pahang, Malaysia. pp. 1588-1594., 46 (4). (Published)

Veerendra, A. S. and A. A., Shah and M., SubbaRao and Mohd Rusllim, Mohamed (2021) Digital Fuzzy Current Controlled Light-Emitting Diode Driver with Power Factor Correction. International Journal of Photoenergy, 2021 (6618284). ISSN 1687-529X (Online). (Published)

Veerendra, A. S. and A. A., Shah and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya and Puiki, Leung (2021) Wavelet Transform Based Fault Identification and Reconfiguration for a Reduced Switch Multilevel Inverter Fed Induction Motor Drive. Electronics, 10 (9). pp. 1-17. ISSN 2079-9292. (Published)

Veerendra, A. S. and Mohd Rusllim, Mohamed and Pui, Ki Leung and Shah, Akeel Abbas (2021) Hybrid power management for fuel cell/supercapacitor series hybrid electric vehicle. International Journal of Green Energy, 18 (2). pp. 128-143. ISSN 1543-5075 (Print), 1543-5083 (Online). (Published)

Veerendra, A. S. and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya (2021) A novel fault-detection methodology of proposed reduced switch MLI fed induction motor drive using discrete wavelet transforms. International Transactions on Electrical Energy Systems, 31 (4). pp. 1-25. ISSN 2050-7038. (Published)

Veerendra, Arigela Satya and Shah, Akeel A. and Mohd Rusllim, Mohamed and Sekhar, Chavali Punya and Leung, Puiki (2021) Wavelet transform based fault identification and reconfiguration for a reduced switch multilevel inverter fed induction motor drive. Electronics, 10 (9). pp. 1-17. ISSN 2079-9292. (Published)

VijayaKumar, Shamala Devi and Junaidi, Zakaria and Norida, Ridzuan (2021) Molecular dynamics approach on intermolecular interaction between n-icosane and gemini surfactant assisted nanoparticles. Petroleum Research. pp. 1-7. ISSN 2096-2495. (In Press / Online First) (In Press / Online First)

VijayaKumar, Shamala Devi and Norida, Ridzuan (2021) Molecular interaction study on Gemini surfactant and nanoparticles in wax inhibition of Malaysian crude oil. Asia-Pacific Journal of Chemical Engineering. pp. 1-8. ISSN 1932-2135. (In Press / Online First) (In Press / Online First)

Vijayan, Bincy Lathakumary and Yasin, A. and Izan Izwan, Misnon and Anilkumar, Gopinathan M. and Hamed, F. and Yang, Chun-Chen and Jose, Rajan (2021) Dual hybrid energy storage device with a battery–electrochemical capacitor hybrid cathode and a battery-type anode. Energy Fuels, 35 (16). pp. 13438-13448. ISSN 1520-5029. (Published)

Vikneswary, Rajendaran and Syed M., Saufi and M. A. K. M., Zahari and Abdul Wahab, Mohammad (2021) Membrane support formulation and carrier selection in supported liquid membrane for extraction of zwitterionic form of Glutamic acid. Materials Today: Proceedings, 41 (Part 1). pp. 116-121. ISSN 2214-7853. (Published)

Vikneswary, Rajendaran and Syed Mohd, Saufi and Mior Ahmad Khushairi, Mohd Zahari and Norasikin, Othman and Raja Norimie, Raja Sulaiman (2021) Tailoring hydrophobicity of polyethersulfone membrane support for levulinic acid extraction using supported liquid membrane process. Korean Journal of Chemical Engineering, 38. pp. 2519-2529. ISSN 0256-1115 (Print); 1975-7220 (Online). (In Press / Online First) (In Press / Online First)

Vivekanandan, Panneerselvam and Faiz, Mohd Turan (2021) Optimisation of Injection Moulding Process Parameter Using Taguchi and Desirability Function. In: Advances in Mechatronics, Manufacturing, and Mechanical Engineering: Selected articles from MUCET 2019 , 19-22 November 2019 , Bukit Gambang Resort City, Pahang, Malaysia. pp. 247-260.. ISBN 978-981-15-7309-5 (Published)

W

W. A., Ajibike and Adeleke, A. Q. and Fazeeda, Mohamad and J.A., Bamgbade and T.D., Moshood (2021) The impacts of social responsibility on the environmental sustainability performance of the Malaysian construction industry. International Journal Of Construction Management. pp. 1-10. ISSN 1562-3599 (Print) 2331-2327 (Online). (Published)

W. H., Azmi and K., Abdul Hamid and A. I., Ramadhan and A. I. M., Shaiful (2021) Thermal hydraulic performance for hybrid composition ratio of TiO2–SiO2 nanofluids in a tube with wire coil inserts. Case Studies in Thermal Engineering, 25 (100899). pp. 1-14. ISSN 2214-157X. (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and M. N., Arifin and W., Tasnim (2021) Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method. Arabian Journal for Science and Engineering, 46 (8). pp. 7699-7718. ISSN 1319-8025 (print); 2191-4281 (online). (Published)

Wahaizad, Safiei and M. M., Rahman and A. R., Yusoff and Wajiha Tasnim, Urmi and Zetty Akhtar, Abd Malek (2021) Evaluation Of Cutting Force in End Milling Process of Aluminum Alloy 6061-T6 Using Tungsten Carbide Inserts with MQL Method Utilizing Hybrid Nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 111-125. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and M. A., Hadi and W. H., Azmi and M. N., Arifin (2021) Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 47-62. ISSN 2289-7879. (Published)

Wahaizad, Safiei and M. M., Rahman and Musfirah, Abdul Hadi and Maleque, M. A. and Singh, R. (2021) Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: IOP Conference Series: Materials Science and Engineering, 5th International Conference on Mechanical Engineering Research (ICMER 2019) , 30-31 July 2019 , Kuantan, Malaysia. pp. 1-10., 788 (012094). ISSN 1757-899X (Published)

Wahyu, Sapto Aji and Kamarul Hawari, Ghazali and Son Ali, Akbar (2021) Automatic oil palm unstripped bunch (USB) counting system based on faster RCNN and object tracking. In: 2nd International Conference on Computer Science and Engineering: The Effects of the Digital World After Pandemic (EDWAP), IC2SE 2021. 2nd International Conference on Computer Science and Engineering, IC2SE 2021 , 16 - 18 November 2021 , Padang, Indonesia. pp. 1-5.. ISBN 978-166540045-9 (Published)

Wajiha Tasnim, Urmi (2021) Wear rate reduction mechanism of minimum quantity lubrication to enhance machinability using hybrid nano-coolant (TiO2- Al2O3). Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Waleed Abdulmaged, Hammood (2021) Extending delone and mclean success model with diffusion of innovation theory factors for flood early warning and response system success model : a case study at pahang civil defence department. PhD thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Ruzaini, Abdullah Arshah).

Wan Ismail, Ibrahim and Mohd Rusllim, Mohamed and R. M. T. R., Ismail and Leung, P. K. and Xing, W. W. and A. A., Shah (2021) Hydrokinetic energy harnessing technologies: a review. Energy Reports, 7. 2021 -2042. ISSN 2352-4847. (Published)

Wan Mohd Noor, Che and Rizalman, Mamat and Muhammad Yusri, Ismail and Wan Nurdiyana, Wan Mansor and Sheikh, Alif (2021) Performance and emission control of using steam injection on medium-speed marine diesel engine running with biodiesel fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (2). 10 -23. ISSN 2289-7879. (Published)

Wan Naimah, Wan Ab Naim and Azam, Ahmad Bakir and Mohd Jamil, Mohamed Mokhtarudin and Nik Abdullah, Nik Mohamed and Bee, Ting Chan (2021) The effect of variation of myocardium wall thickness on the evolution of ischemic heart wall stress and movement: A computational modelling study. In: Proceedings - 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020. 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020 , 1 - 3 March 2021 , Langkawi. 298 -302. (9398744). ISBN 978-1-7281-4245-6 (Published)

Wan Naimah, Wan Ab Naim and Mohd Jamil Mohamed, Mokhtarudin and Azam, Ahmad Bakir and Putri Nur Alia Nasuha, Mohd Nor and Nik Abdullah, Nik Mohamed (2021) Study of Oxygen Deprivation on Cardiomyocyte using Electro-chemical Coupled Mathematical Model. In: The 6th IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES 2020) , 1-3 March 2021 , Hybrid Conference, Langkawi, Malaysia. pp. 1-5.. (Published)

Wan Naimah, Wan Ab Naim and Sun, Zhonghua and Liew, Yih Miin and Chan, Bee Ting and Jansen, Shirley and Lei, Jing and Poo Balan, Ganesan and Shahrul Amry, Hashim and Ganiga Srinivasaiah, Sridhar and Lim, Einly (2021) Comparison of diametric and volumetric changes in Stanford type B aortic dissection patients in assessing aortic remodeling post-stent graft treatment. Quantitative Imaging in Medicine and Surgery, 11 (5). pp. 1723-1736. ISSN 2223-4292. (Published)

Wan Norfazilah, Wan Ismail and Hartina, Mohd Yusop (2021) A Review on Synthesis of Plant-Mediated Metal Nanoparticles for Fabric Coating. Malaysian Journal of Chemistry, 23 (2). pp. 40-54. ISSN 15112292. (Published)

Wan Nur Huda Aqilah, Alias (2021) Performance analysis on grid-connected pv system during grid faults with dc-link protection and decoupled current control. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Nurul Huda, Wan Zainal and Loganathan, Enidran and Ganesan, Thavakumara (2021) Encapsulation of freeze-dried propolis powder: Study of in vitro disintegration and dissolution. Indian Journal of Pharmaceutical Education and Research, 55 (2). 428 -435. ISSN 0019-5464. (Published)

Wan Nurul Huda, Wan Zainal and Nur Amirah Adlina, Mohd Azian and Sitti Saleha, Albar and Ainin Sofea, Rusli (2021) Effects of extraction method, solvent and time on the bioactive compounds and antioxidant activity of Tetrigona apicalis Malaysian propolis. Journal of Apicultural Research; Agricultural and Biological Sciences: Insect Science, 61 (2). pp. 264-270. ISSN 0021-8839. (Published)

Wan Syahirah, Wan Samsudin (2021) Severity scoring approach using modified optical flow method and lesion identification for facial nerve paralysis assessment. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Wan Syahirah, Wan Samsudin and Rosdiyana, Samad and Sundaraj, Kenneth and Mohd Zaki, Ahmad (2021) Introduction of Static and Dynamic Features to Facial Nerve Paralysis Evaluation. In: Proceedings of the 11th National Technical Seminar on Unmanned System Technology 2019 (NUSYS’19) , 2-3 December 2019 , Universiti Malaysia Pahang, Gambang Campus, Kuantan, Pahang, Malaysia. pp. 947-963., 666. ISBN 978-981-15-5281-6 (Published)

Wang, Jing and Tao, Hai and Rahman, Md. Arafatur and M. Nomani, Kabir and Yafeng, Li and Zhang, Renrui and Salih, Sinan Q. and Jasni, Mohamad Zain (2021) RERS-CC: Robotic facial recognition system for improving the accuracy of human face identification using HRI. Work, 68 (3). pp. 923-934. ISSN 1051-9815. (Published)

Waseem, Quadri and Alshamrani, Sultan S. and Nisar, Kashif and Wan Isni Sofiah, Wan Din and Alghamdi, Ahmed Saeed (2021) Future technology: Software-defined network (SDN) forensic. Symmetry, 13 (767). pp. 1-16. ISSN 2073-8994. (Published)

Wei Chuan, Cheah and Eh Phon, Danakorn Nincarean (2021) Foodie – Homemade food ordering application for food business. In: Creation, Innovation, Technology & Research Exposition (CITREX) 2021 , 2021 , Virtually hosted by Universiti Malaysia Pahang. p. 1.. (Published)

Wong, Sze Yin and Radhiyah, Abd Aziz (2021) Stability studies of hybrid TiO2 based nanofluids. Journal of Modern Manufacturing Systems and Technology (JMMST), 5 (1). pp. 37-45. ISSN 2636-9575. (Published)

X

Xinni, Liu and Kamarul Hawari, Ghazali and Fengrong, Han and Izzeldin, I. Mohd (2021) Automatic detection of oil palm tree from UAV images based on the deep learning method. Applied Artificial Intelligence, 35 (1). pp. 13-24. ISSN 0883-9514. (Published)

Y

Y., Arsyad and Linggam, R. and Quazi, M. M. and Aiman, Mohd Halil and M., Ishak and A. Q., Zaifuddin and Qaban, Abdullah (2021) Laser surface modification of duplex stainless steel 2205 to modify the surface roughness. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (2). 8695 -8703. ISSN 2180-1606. (Published)

Y. Erny, A. M. Y. and Fadhil, A. R. and Aiman, Mohd Halil and Mahadzir, Ishak and Quazi, M. M. (2021) Comparative study between furnace brazing and laser brazing. In: IOP Conference Series: Materials Science and Engineering; International Conference on Automotive Innovation & Green Energy Vehicle (AIGEV 2020) , 10 - 11 November 2020 , Pekan, Malaysia. pp. 1-10., 1068 (012003). ISSN 1757-899X (Published)

Ya'acob, A. and Zainol, N. and Mohd Ridza, P. N. Y. and Mortan, S. H. (2021) Pineapple leaves juice characterization for microbial growth inhibition. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-9., 1092 (012088). ISSN 1757-899X (Published)

Yahya Mohammed, Al-Naggar and Norlida, Jamil and Mohd Firdaus, Hassan and Ahmad Razlan, Yusoff (2021) Condition monitoring based on IoT for predictive maintenance of CNC machines. In: Procedia CIRP: 18th CIRP Conference on Modelling of Machining Operations , 15-17 Jun 2021 , Ljubljana, Slovenia. pp. 314-318., 102. ISSN 2212-8271 (Published)

Yakin, H. N. and Nik Abdullah, Nik Mohamed and M. R. M., Rejab (2021) A quasi-brittle damage model in the framework of bond-based peridynamics with adaptive dynamic relaxation method. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8617 -8623. ISSN 2231-8380 (online). (Published)

Yap, Mei Ing and Moorthy, Kohbalan and Kauthar, Mohd Daud and Ernawan, Ferda (2021) Optical character recognition using backpropagation neural network for handwritten digit characters. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 24-26 August 2021 , Pekan. 167 -171.. ISBN 9781665414074 (Published)

Yashini, K.Selvanathan (2021) Microbial acid production by indigenous microorganism from ananas cosmosus. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Nasratun, Masngut).

Yashini, Selvanathan and Nasratun, Masngut (2021) A statistical study of factors affecting natural biovinegar fermentation from pineapple peel waste. In: IOP Conference Series: Materials Science and Engineering, The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 -23 December 2020 , Pekan Pahang, Malaysia. pp. 1-12., 1092 (012004). ISSN 1757-899X (Published)

Yasmeen, Hafiz Zaki Ahmed (2021) The performance of integrated ultrasonic membrane anaerobic system (IUMAS) in treating sugar cane wastewater. PhD thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yasmin Amirah, Che Yahaya (2021) Three tongkat ali plants (eurycoma longifolia, polyalthia bullata, and stema tuberosa) studied for their aphrodisiac potentials with emphasis on their testosterone boosting capabilities. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Yau’mee Hayati, Hj Mohamed Yusof and Ruzaini, Abdullah Arshah and Awanis, Romli (2021) Roles selection: a computational approach using ELECTRE and CFFR based on multi criteria tacit knowledge acquisition. In: Journal of Physics: Conference Series; 1st International Recent Trends in Engineering, Advanced Computing and Technology Conference, RETREAT 2020 , 1 - 3 December 2020 , Paris, France (Virtual). pp. 1-13., 1874 (1). ISSN 1742-6588 (print); 1742-6596 (online) (Published)

Yeap, Swee Keong and Norlaily, Mohd Ali and Akhtar, Muhammad Nadeem and Nursyamirah, Abd Razak and Chong, Zhi Xiong and Ho, Wan Yong and Boo, Lily and Seema, Zareen and Tonni Agustiono, Kurniawan and Avtar, Ram and Ng, Stephanie Y. L. and Ong, Alan Han Kiat and Alitheen, Noorjahan Banu (2021) Induction of apoptosis and regulation of MicroRNA expression by (2E,6E)-2,6-bis-(4-hydroxy-3-methoxybenzylidene)-cyclohexanone (BHMC) treatment on MCF-7 breast cancer cells. Molecules, 26 (5). pp. 1-15. ISSN 1420-3049 (print); 1420-3049 (online). (Published)

Yeong, Yi Ling and Pang, Sook Fun and Putranto, Aditya and Jolius, Gimbun (2021) Optimisation of microwave-assisted extraction (MAE) of anthraquinone and flavonoids from Senna alata (L.) Roxb. Natural Product Research. pp. 1-5. ISSN 1478-6427. (In Press / Online First) (In Press / Online First)

Yet, Ong Zu and Rassem, Taha H. and Rahman, Md. Arafatur and M. M., Rahman (2021) Improved attentive pairwise interaction (API-Net) for fine-grained image classification. In: IEEE Emerging Technology in Computing, Communication and Electronics (ETCCE 2021) , 21-23 December 2021 , Dhaka, Bangladesh. pp. 1-6. (21605301). ISBN 978-166548364-3 (Published)

Yong, Chen How and Ahmad Fakhri, Ab. Nasir and Khairul Fikri, Muhammad and Anwar P. P., Abdul Majeed and Mohd Azraai, Mohd Razman and Muhammad Aizzat, Zakaria (2021) Glove defect detection via YOLO V5. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 3 (2). pp. 25-35. ISSN 2637-0883. (Published)

Yong, Yung Sheng and Ruwaida, Abdul Rasid (2021) Process simulation of hydrogen production through biomass gasification: introduction of torrefaction pre-treatment. International Journal of Hydrogen Energy, 42. pp. 42040-42050. ISSN 0360-3199. (Published)

Yoppy Mirza, Maulana and Zafril Rizal, M Azmi and Ruzaini, Abdullah Arshah and Muhammad Aliif, Ahmad and Halah, Zain (2021) Framework Of Strategic Alignment Through Enterprise Architecture For Organization Performance. In: 2021 International Conference on Software Engineering & Computer Systems and 4th International Conference on Computational Science and Information Management (ICSECS-ICOCSIM) , 21-26 August 2021 , Pekan, Pahang, Malaysia. pp. 512-517. (171807). ISBN 9781665414074 (Published)

Youventharan, Duraisamy and Putra Jaya, Ramadhansyah and Jeevithan, K. M. and Rokiah, Othman and Mohd Arif, Sulaiman and Yaacob, H. (2021) Durability Performance of Concrete Debris and Bottom Ash as an Alternative Track Ballast Material. In: IOP Conference Series: Earth and Environmental Science, 4th National Conference on Wind & Earthquake Engineering , 16-17 October 2020 , Putrajaya, Malaysia. pp. 1-12., 682 (012053). ISSN 1755-1315 (Published)

Yusmin, Jaffar (2021) Modelling success factors influencing industrialized building system project performance using dematel. Masters thesis, Universiti Malaysia Pahang (Contributors, Thesis advisor: Lee Chia, Kuang).

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Azhar, Ahmad Syafiq Jazatul and Nelfiyanti, . (2021) The effect of quick response manufacturing in supply chain activities: A case study of automotive company in Malaysia. In: Lecture Notes in Mechanical Engineering; Recent Trends in Manufacturing and Materials Towards Industry 4.0. , 6 August 2020 , Universiti Malaysia Pahang. pp. 547-553.. ISSN 2195-4356 ISBN 978-981-15-9504-2 (Published)

Yusoof, M. Y. M. and Nik Mohamed, N. M. Z. and Nelfiyanti, . and Hadi, M. Z. I. A. (2021) The effect of quick response manufacturing in factory layout: Assessment using Witness software. In: IOP Conference Series: Materials Science and Engineering; The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19 -20 January 2021 , Pekan, Malaysia. pp. 1-18., 1078 (012027). ISSN 1757-899X (Published)

Z

Z., Zulkfli and Fatchurrohman, Nanang (2021) Advancement in friction stir processing on magnesium alloys. IOP Conference Series: Materials Science and Engineering, 1092 (012006). pp. 1-10. ISSN 1757-8981 (Print), 1757-899X (Online). (Published)

Z. M., Hafizi and Vorathin, E. (2021) Investigation of low frequency fibre Bragg grating accelerometer based on thermoplastic cantilever beam. In: IOP Conference Series: Materials Science and Engineering, The International Postgraduate Conference on Mechanical Engineering (IPCME 2021) , 19-20 January 2021 , Pekan, Pahang, Malaysia. pp. 1-7., 1078 (012012). ISSN 1757-899X (Published)

Zaidatul Syahida, Adnan and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Nor Hasanah, Abdul Shukor Lim (2021) Review paper: Performance of rice husk ash as a material for partial cement replacement in concrete. In: Materials Today: Proceedings; 2nd International Conference on Innovative Technology and Sciences (iCITES 2020) , 22 December 2020 , Online. pp. 1-7., 48 (4). ISSN 2214-7853 (Published)

Zaidatul Syahida, Adnan and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Nor Hasanah, Abdul Shukor Lim (2021) Review paper: Strength performance of eggshell as a cement replacement in concrete. Key Engineering Materials, 879. pp. 22-33. ISSN 1662-9795. (Published)

Zaidatul Syahida, Adnan and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Nor Hasanah, Abdul Shukor Lim (2021) The assessment on the acceptance of waste materials as a partial cement replacement in Malaysian construction industry. In: IOP Conference Series: Materials Science and Engineering; The 2nd International Conference on Innovative Technology, Engineering and Sciences (iCITES 2020) , 22 - 23 December 2020 , Pekan Pahang, Malaysia. pp. 1-17., 1092 (1). ISSN 1757-899X (Published)

Zaimi, M. N. S. and Nur Farhayu, Ariffin and Sharifah Maszura, Syed Mohsin and Nor Hasanah, Abdul Shukor Lim and Fadzil, Mat Yahaya and Khairunisa, Muthusamy and Saffuan, Wan Ahmad (2021) Strength and chloride penetration performance of concrete using coal bottom ash as coarse and fine aggregate replacement. In: IOP Conference Series: Earth and Environmental Science; 4th National Conference on Wind and Earthquake Engineering, NCWE 2020 , 16 - 17 October 2020 , Putrajaya, Malaysia. pp. 1-7., 682 (012067). ISSN 1755-1315 (Published)

Zainordin, A. Z. and Zamri, Mohamed and F., Ahmad (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (1). 8577 -8584. ISSN 2229-8649 (Print); 2180-1606 (Online). (Published)

Zairul Azrul, Zakaria and Zafri Azran, Abdul Majid and Muhammad Amin, Harun and Ahmad Faris, Ismail and Sany Izan, Ihsan and Kamaruzzaman, Sopian and Amir, Abdul Razak and Ahmad Fadzil, Sharol (2021) Investigation on the thermal performance of evacuated glass-thermal absorber tube collector (EGATC) for air heating application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). 48 -64. ISSN 2289-7879. (Published)

Zalinawati, Muhamad (2021) Performance of buri palm (corypha utan) reinforced epoxy composite : effect of alkali treatment. Masters thesis, Universiti Malaysia Pahang (Contributors, UNSPECIFIED: UNSPECIFIED).

Zarith Liyana, Zahari and Mahfuzah, Mustafa and Zaridah, Mat Zain and Rafiuddin, Abdubrani and Faradila, Naim (2021) The enhancement on stress levels based on physiological signal and self-stress assessment. Traitement du Signal, 38 (5). pp. 1439-1447. ISSN 0765-0019. (Published)

Zayyinul Hayati, Zen and Widia, Mirta and Ezrin Hani, Sukadarin (2021) A review on ergonomic assessment tool at small and medium enterprise (SME) industries. In: Lecture Notes in Mechanical Engineering; Human Engineering Symposium, HUMENS 2021 , 22 February 2021 , Virtual Conference. 551 -558.. ISSN 2195-4356 ISBN 978-981164114-5 (Published)

Zetty Akhtar, Abdul Malek and Md Mustafizur, Rahman and Kadirgama, Kumaran and Saidur, Rahman and Wahaizad, Safiei (2021) Effects of temperature and concentration on thermophysical properties of TiO2-MWCNTs -doped graphene nanofluids. In: 2nd International Conference on Innovative Technology and Sciences, iCITES 2020 , 22 December 2020 , Chennai, India. pp. 920-925., 48 (4). ISSN 2214-7853 (Published)

Zhao, Yue and Han, Fengrong and Guo, Linyi and Zhang, Jun and Zhang, Haidong and Izzeldin, I. Mohd and Kamarul Hawari, Ghazali (2021) Flotation separation of poly (ethylene terephthalate and vinyl chloride) mixtures based on clean corona modification: Optimization using response surface methodology. Waste Management, 136. pp. 184-194. ISSN 0734242X. (Published)

Zheng, Ping Lee and Rahimi, A. Rahman and Doh, Shu Ing (2021) Key drivers for adopting design-build in public construction projects: Malaysian perspective. Journal of Construction in Developing Countries, 26 (1). pp. 131-160. ISSN 1823-6499. (Published)

Zul, M. H. and Mahadzir, Ishak and Aiman, Mohd Halil and Quazi, M. M. (2021) Influence of laser power in nanosecond laser texturing for a hydrophobic state on SS316L. Journal of Mechanical Engineering and Sciences (JMES), 15 (4). 8592 -8600. ISSN 2289-4659 (print); 2231-8380 (online). (Published)

Zulkhibri, Ismail and Rahimah, Jusoh and Ahmad Qushairi, Mohamad and Nur Fatihah, Mod Omar and Husna Izzati, Osman (2021) Effects of Radiation and Magnetohydrodynamics on Unsteady Casson Fluid over Accelerated Plate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 93-100. ISSN 2289-7879. (Published)